{ "task_id": "DualArmPushObject-v1", "native_horizon": 400, "robot_uids": [ "panda", "panda" ], "instruction": "- Phase 0: Both arms press the clay flat so it fits the tube inner cross-section.\n- Phase 1: One arm carries the tube and places it against the platform edge.\n- Phase 2: The other arm pushes the clay into the tube with a rigid board.", "cameras": [ "front_camera", "left_camera", "robot_camera_0", "robot_camera_1", "top_camera" ], "proprio_paths": [ "agent/panda-0/qpos", "agent/panda-0/qvel", "agent/panda-1/qpos", "agent/panda-1/qvel" ], "control_mode": "pd_ee_delta_pose", "action_parts": [ { "robot_key": "panda-0", "width": 7 }, { "robot_key": "panda-1", "width": 7 } ], "action_width": 14, "control_hz": 20, "action_semantics": "Per robot: six normalized arm components followed by normalized joint deltas for dex hands, or an absolute normalized gripper target for Panda. Mobile bases prepend three absolute joint positions.", "units_and_coordinates": { "panda_arm_translation": "normalized [-1,1] maps to [-0.1,0.1] meters in robot root frame", "panda_arm_rotation": "three components clipped by vector norm to one, multiplied by rot_lower (-0.5 radians), Euler-to-quaternion rotation in root-aligned frame; this records the current controller implementation", "dex_joint_delta": "normalized [-1,1] maps to [-0.1,0.1] radians", "panda_gripper": "normalized [-1,1] maps to [-0.01,0.04] meters for the mimic control joint", "mobile_base": "absolute base joint coordinates; native public action bounds still require validation" }, "action_low": [ -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0, -1.0 ], "action_high": [ 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 ], "initial_hold_recipe": "Zero normalized deltas for arms/dex hands. For each Panda gripper, use reset robot qpos[7] only, mapped as 2*(qpos[7]+0.01)/0.05-1. Discard all reset scene fields. Reject any hold outside native action bounds; never clip an invalid hold into a different command." }