Technique stringclasses 79
values | Technique_ID stringclasses 79
values | Technique_Description stringclasses 79
values | Tactic stringclasses 22
values | Tactic_Description stringclasses 22
values | Mitigation Name stringclasses 51
values | Mitigation Technology Description float64 | MIT_ID stringclasses 51
values | Mitigation_Description stringclasses 51
values | NIST SP 800-53 Rev. 4 stringclasses 26
values | IEC 62443-3-3:2013 stringclasses 18
values | IEC 62443-4-2:2019 stringclasses 22
values | References stringclasses 24
values | Reference_Link stringclasses 23
values | ICS_ASSET stringclasses 8
values | DATA_Source stringclasses 49
values | Purdue_Model_Level stringclasses 5
values | MAT_MIT_REF_Links stringclasses 51
values | MAT_TEC_REF_Links stringclasses 79
values |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Access Management | null | M0801 | Access Management technologies can be used to enforce authorization polices and decisions, especially when existing field devices do not provided sufficient capabilities to support user identification and authentication. [1] These technologies typically utilize an in-line network device or gateway system to prevent acc... | AC-3 | SR 2.1 | CR 2.1 | 1. McCarthy, J et al.. (2018, July). NIST SP 1800-2 Identity and Access Management for Electric Utilities. Retrieved September 17, 2020. | https://doi.org/10.6028/NIST.SP.1800-2 | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0801 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Access Management | null | M0801 | Access Management technologies can be used to enforce authorization polices and decisions, especially when existing field devices do not provided sufficient capabilities to support user identification and authentication. [1] These technologies typically utilize an in-line network device or gateway system to prevent acc... | AC-3 | SR 2.1 | CR 2.1 | 1. McCarthy, J et al.. (2018, July). NIST SP 1800-2 Identity and Access Management for Electric Utilities. Retrieved September 17, 2020. | https://doi.org/10.6028/NIST.SP.1800-2 | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0801 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Authorization Enforcement | null | M0800 | The device or system should restrict read, manipulate, or execute privileges to only authenticated users who require access based on approved security policies. Role-based Access Control (RBAC) schemes can help reduce the overhead of assigning permissions to the large number of devices within an ICS. For example, IEC 6... | AC-3 | SR 2.1 | CR 2.1 | 3. MITRE. (2020, June). CWE CATEGORY: 7PK - API Abuse. Retrieved September 25, 2020. | https://cwe.mitre.org/data/definitions/227.html | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0800 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Authorization Enforcement | null | M0800 | The device or system should restrict read, manipulate, or execute privileges to only authenticated users who require access based on approved security policies. Role-based Access Control (RBAC) schemes can help reduce the overhead of assigning permissions to the large number of devices within an ICS. For example, IEC 6... | AC-3 | SR 2.1 | CR 2.1 | 3. MITRE. (2020, June). CWE CATEGORY: 7PK - API Abuse. Retrieved September 25, 2020. | https://cwe.mitre.org/data/definitions/227.html | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0800 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Communication Authenticity | null | M0802 | When communicating over an untrusted network, utilize secure network protocols that both authenticate the message sender and can verify its integrity. This can be done either through message authentication codes (MACs) or digital signatures, to detect spoofed network messages and unauthorized connections. | SC-8; SC-23 | SR 3.1 | CR 3.1 | 1. CISA. (2010, March 11). https://us-cert.cisa.gov/ncas/tips/ST05-003. Retrieved September 25, 2020. | https://us-cert.cisa.gov/ncas/tips/ST05-003 | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0802 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Communication Authenticity | null | M0802 | When communicating over an untrusted network, utilize secure network protocols that both authenticate the message sender and can verify its integrity. This can be done either through message authentication codes (MACs) or digital signatures, to detect spoofed network messages and unauthorized connections. | SC-8; SC-23 | SR 3.1 | CR 3.1 | 1. CISA. (2010, March 11). https://us-cert.cisa.gov/ncas/tips/ST05-003. Retrieved September 25, 2020. | https://us-cert.cisa.gov/ncas/tips/ST05-003 | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0802 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Filter Network Traffic | null | M0937 | Use network appliances to filter ingress or egress traffic and perform protocol-based filtering. Configure software on endpoints to filter network traffic. Perform inline allow/denylisting of network messages based on the application layer (OSI Layer 7) protocol, especially for automation protocols. Application allowli... | AC-3; SC-7 | SR 5.1 | CR 5.1 | 1. Centre for the Protection of National Infrastructure 2005, February FIREWALL DEPLOYMENT FOR SCADA AND PROCESS CONTROL NETWORKS Retrieved. 2020/09/17 | https://www.energy.gov/sites/prod/files/Good%20Practices%20Guide%20for%20Firewall%20Deployment.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0937 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Filter Network Traffic | null | M0937 | Use network appliances to filter ingress or egress traffic and perform protocol-based filtering. Configure software on endpoints to filter network traffic. Perform inline allow/denylisting of network messages based on the application layer (OSI Layer 7) protocol, especially for automation protocols. Application allowli... | AC-3; SC-7 | SR 5.1 | CR 5.1 | 1. Centre for the Protection of National Infrastructure 2005, February FIREWALL DEPLOYMENT FOR SCADA AND PROCESS CONTROL NETWORKS Retrieved. 2020/09/17 | https://www.energy.gov/sites/prod/files/Good%20Practices%20Guide%20for%20Firewall%20Deployment.pdf | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0937 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Human User Authentication | null | M0804 | Require user authentication before allowing access to data or accepting commands to a device. While strong multi-factor authentication is preferable, it is not always feasible within ICS environments. Performing strong user authentication also requires additional security controls and processes which are often the targ... | IA-2 | SR 1.1 | CR 1.1 | null | null | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0804 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Human User Authentication | null | M0804 | Require user authentication before allowing access to data or accepting commands to a device. While strong multi-factor authentication is preferable, it is not always feasible within ICS environments. Performing strong user authentication also requires additional security controls and processes which are often the targ... | IA-2 | SR 1.1 | CR 1.1 | null | null | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0804 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Software Process and Device Authentication | null | M0813 | Require the authentication of devices and software processes where appropriate. Devices that connect remotely to other systems should require strong authentication to prevent spoofing of communications. Furthermore, software processes should also require authentication when accessing APIs. | IA-9 | SR 1.2 | CR 1.2 | null | null | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0813 | https://attack.mitre.org/techniques/T0800 |
Activate Firmware Update Mode | T0800 | Adversaries may activate firmware update mode on devices to prevent expected response functions from engaging in reaction to an emergency or process malfunction. For example, devices such as protection relays may have an operation mode designed for firmware installation. This mode may halt process monitoring and relate... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Software Process and Device Authentication | null | M0813 | Require the authentication of devices and software processes where appropriate. Devices that connect remotely to other systems should require strong authentication to prevent spoofing of communications. Furthermore, software processes should also require authentication when accessing APIs. | IA-9 | SR 1.2 | CR 1.2 | null | null | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0813 | https://attack.mitre.org/techniques/T0800 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Audit | null | M0947 | Perform audits or scans of systems, permissions, insecure software, insecure configurations, etc. to identify potential weaknesses. Perform periodic integrity checks of the device to validate the correctness of the firmware, software, programs, and configurations. Integrity checks, which typically include cryptographic... | SI-7 | SR 3.4 | CR 3.4 | 1. IEC. (2019, February). Security for industrial automation and control systems - Part 4-2: Technical security requirements for IACS components. Retrieved September 25, 2020. | https://webstore.iec.ch/publication/34421 | Control Server | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 2 | https://attack.mitre.org/mitigations/M0947 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Audit | null | M0947 | Perform audits or scans of systems, permissions, insecure software, insecure configurations, etc. to identify potential weaknesses. Perform periodic integrity checks of the device to validate the correctness of the firmware, software, programs, and configurations. Integrity checks, which typically include cryptographic... | SI-7 | SR 3.4 | CR 3.4 | 1. IEC. (2019, February). Security for industrial automation and control systems - Part 4-2: Technical security requirements for IACS components. Retrieved September 25, 2020. | https://webstore.iec.ch/publication/34421 | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0947 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Audit | null | M0947 | Perform audits or scans of systems, permissions, insecure software, insecure configurations, etc. to identify potential weaknesses. Perform periodic integrity checks of the device to validate the correctness of the firmware, software, programs, and configurations. Integrity checks, which typically include cryptographic... | SI-7 | SR 3.4 | CR 3.4 | 1. IEC. (2019, February). Security for industrial automation and control systems - Part 4-2: Technical security requirements for IACS components. Retrieved September 25, 2020. | https://webstore.iec.ch/publication/34421 | Human-Machine Interface | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 1 Level 2 | https://attack.mitre.org/mitigations/M0947 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Communication Authenticity | null | M0802 | When communicating over an untrusted network, utilize secure network protocols that both authenticate the message sender and can verify its integrity. This can be done either through message authentication codes (MACs) or digital signatures, to detect spoofed network messages and unauthorized connections. | SC-8; SC-23 | SR 3.1 | CR 3.1 | 1. CISA. (2010, March 11). https://us-cert.cisa.gov/ncas/tips/ST05-003. Retrieved September 25, 2020. | https://us-cert.cisa.gov/ncas/tips/ST05-003 | Control Server | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 2 | https://attack.mitre.org/mitigations/M0802 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Communication Authenticity | null | M0802 | When communicating over an untrusted network, utilize secure network protocols that both authenticate the message sender and can verify its integrity. This can be done either through message authentication codes (MACs) or digital signatures, to detect spoofed network messages and unauthorized connections. | SC-8; SC-23 | SR 3.1 | CR 3.1 | 1. CISA. (2010, March 11). https://us-cert.cisa.gov/ncas/tips/ST05-003. Retrieved September 25, 2020. | https://us-cert.cisa.gov/ncas/tips/ST05-003 | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0802 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Communication Authenticity | null | M0802 | When communicating over an untrusted network, utilize secure network protocols that both authenticate the message sender and can verify its integrity. This can be done either through message authentication codes (MACs) or digital signatures, to detect spoofed network messages and unauthorized connections. | SC-8; SC-23 | SR 3.1 | CR 3.1 | 1. CISA. (2010, March 11). https://us-cert.cisa.gov/ncas/tips/ST05-003. Retrieved September 25, 2020. | https://us-cert.cisa.gov/ncas/tips/ST05-003 | Human-Machine Interface | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 1 Level 2 | https://attack.mitre.org/mitigations/M0802 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Disable or Remove Feature or Program | null | M0942 | Remove or deny access to unnecessary and potentially vulnerable software to prevent abuse by adversaries. | CM-7 | SR 7.7 | CR 7.7 | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Control Server | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 2 | https://attack.mitre.org/mitigations/M0942 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Disable or Remove Feature or Program | null | M0942 | Remove or deny access to unnecessary and potentially vulnerable software to prevent abuse by adversaries. | CM-7 | SR 7.7 | CR 7.7 | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0942 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Disable or Remove Feature or Program | null | M0942 | Remove or deny access to unnecessary and potentially vulnerable software to prevent abuse by adversaries. | CM-7 | SR 7.7 | CR 7.7 | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Human-Machine Interface | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 1 Level 2 | https://attack.mitre.org/mitigations/M0942 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Intrusion Prevention | null | M0931 | Use intrusion detection signatures to block traffic at network boundaries. In industrial control environments, network intrusion prevention should be configured so it will not disrupt protocols and communications responsible for real-time functions related to control or safety. | SI-4 | SR 6.2 | CR 6.2 | 1. Gardiner, J., Cova, M., Nagaraja, S. (2014, February). Command & Control Understanding, Denying and Detecting. Retrieved April 20, 2016. | https://arxiv.org/ftp/arxiv/papers/1408/1408.1136.pdf | Control Server | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 2 | https://attack.mitre.org/mitigations/M0931 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Intrusion Prevention | null | M0931 | Use intrusion detection signatures to block traffic at network boundaries. In industrial control environments, network intrusion prevention should be configured so it will not disrupt protocols and communications responsible for real-time functions related to control or safety. | SI-4 | SR 6.2 | CR 6.2 | 1. Gardiner, J., Cova, M., Nagaraja, S. (2014, February). Command & Control Understanding, Denying and Detecting. Retrieved April 20, 2016. | https://arxiv.org/ftp/arxiv/papers/1408/1408.1136.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0931 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Intrusion Prevention | null | M0931 | Use intrusion detection signatures to block traffic at network boundaries. In industrial control environments, network intrusion prevention should be configured so it will not disrupt protocols and communications responsible for real-time functions related to control or safety. | SI-4 | SR 6.2 | CR 6.2 | 1. Gardiner, J., Cova, M., Nagaraja, S. (2014, February). Command & Control Understanding, Denying and Detecting. Retrieved April 20, 2016. | https://arxiv.org/ftp/arxiv/papers/1408/1408.1136.pdf | Human-Machine Interface | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 1 Level 2 | https://attack.mitre.org/mitigations/M0931 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Control Server | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 2 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Human-Machine Interface | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 1 Level 2 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Control Server | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 2 | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Human-Machine Interface | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 1 Level 2 | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Software Process and Device Authentication | null | M0813 | Require the authentication of devices and software processes where appropriate. Devices that connect remotely to other systems should require strong authentication to prevent spoofing of communications. Furthermore, software processes should also require authentication when accessing APIs. | IA-9 | SR 1.2 | CR 1.2 | null | null | Control Server | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 2 | https://attack.mitre.org/mitigations/M0813 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Software Process and Device Authentication | null | M0813 | Require the authentication of devices and software processes where appropriate. Devices that connect remotely to other systems should require strong authentication to prevent spoofing of communications. Furthermore, software processes should also require authentication when accessing APIs. | IA-9 | SR 1.2 | CR 1.2 | null | null | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0813 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Software Process and Device Authentication | null | M0813 | Require the authentication of devices and software processes where appropriate. Devices that connect remotely to other systems should require strong authentication to prevent spoofing of communications. Furthermore, software processes should also require authentication when accessing APIs. | IA-9 | SR 1.2 | CR 1.2 | null | null | Human-Machine Interface | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 1 Level 2 | https://attack.mitre.org/mitigations/M0813 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Static Network Configuration | null | M0814 | Configure hosts and devices to use static network configurations when possible, protocols that require dynamic discovery/addressing (e.g., ARP, DHCP, DNS) can be used to manipulate network message forwarding and enable various MitM attacks. This mitigation may not always be usable due to limited device features or chal... | CM-7 | SR 7.7 | CR 7.7 | 1. D. Parsons and D. Wylie. (2019, September). Practical Industrial Control System (ICS) Cybersecurity: IT and OT Have Converged – Discover and Defend Your Assets. Retrieved September 25, 2020.
2. Colin Gray. (n.d.). How SDN Can Improve Cybersecurity in OT Networks. Retrieved September 25, 2020.
3. Josh Rinaldi. (201... | https://www.csiac.org/journal-article/practical-industrial-control-system-ics-cybersecurity-it-and-ot-have-converged-discover-and-defend-your-assets/
https://cdn.selinc.com/assets/Literature/Publications/Technical%20Papers/6891_HowSDN_CG_20180720_Web2.pdf?v=20190312-231901
https://www.rtautomation.com/rtas-blog/still... | Control Server | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 2 | https://attack.mitre.org/mitigations/M0814 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Static Network Configuration | null | M0814 | Configure hosts and devices to use static network configurations when possible, protocols that require dynamic discovery/addressing (e.g., ARP, DHCP, DNS) can be used to manipulate network message forwarding and enable various MitM attacks. This mitigation may not always be usable due to limited device features or chal... | CM-7 | SR 7.7 | CR 7.7 | 1. D. Parsons and D. Wylie. (2019, September). Practical Industrial Control System (ICS) Cybersecurity: IT and OT Have Converged – Discover and Defend Your Assets. Retrieved September 25, 2020.
2. Colin Gray. (n.d.). How SDN Can Improve Cybersecurity in OT Networks. Retrieved September 25, 2020.
3. Josh Rinaldi. (201... | https://www.csiac.org/journal-article/practical-industrial-control-system-ics-cybersecurity-it-and-ot-have-converged-discover-and-defend-your-assets/
https://cdn.selinc.com/assets/Literature/Publications/Technical%20Papers/6891_HowSDN_CG_20180720_Web2.pdf?v=20190312-231901
https://www.rtautomation.com/rtas-blog/still... | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0814 | https://attack.mitre.org/techniques/T0830 |
Adversary-in-the-Middle | T0830 | Adversaries with privileged network access may seek to modify network traffic in real time using adversary-in-the-middle (AiTM) attacks. This type of attack allows the adversary to intercept traffic to and/or from a particular device on the network. If a AiTM attack is established, then the adversary has the ability to... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Static Network Configuration | null | M0814 | Configure hosts and devices to use static network configurations when possible, protocols that require dynamic discovery/addressing (e.g., ARP, DHCP, DNS) can be used to manipulate network message forwarding and enable various MitM attacks. This mitigation may not always be usable due to limited device features or chal... | CM-7 | SR 7.7 | CR 7.7 | 1. D. Parsons and D. Wylie. (2019, September). Practical Industrial Control System (ICS) Cybersecurity: IT and OT Have Converged – Discover and Defend Your Assets. Retrieved September 25, 2020.
2. Colin Gray. (n.d.). How SDN Can Improve Cybersecurity in OT Networks. Retrieved September 25, 2020.
3. Josh Rinaldi. (201... | https://www.csiac.org/journal-article/practical-industrial-control-system-ics-cybersecurity-it-and-ot-have-converged-discover-and-defend-your-assets/
https://cdn.selinc.com/assets/Literature/Publications/Technical%20Papers/6891_HowSDN_CG_20180720_Web2.pdf?v=20190312-231901
https://www.rtautomation.com/rtas-blog/still... | Human-Machine Interface | Network Traffic: Network Traffic Flow, Network Traffic: Network Traffic Content, Process: OS API Execution, Process: Process Creation, Command: Command Execution | Level 1 Level 2 | https://attack.mitre.org/mitigations/M0814 | https://attack.mitre.org/techniques/T0830 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Device Configuration/Parameters | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0878 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0878 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0878 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Device Configuration/Parameters | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0878 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0878 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0878 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Device Configuration/Parameters | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0878 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0878 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0878 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Static Network Configuration | null | M0814 | Configure hosts and devices to use static network configurations when possible, protocols that require dynamic discovery/addressing (e.g., ARP, DHCP, DNS) can be used to manipulate network message forwarding and enable various MitM attacks. This mitigation may not always be usable due to limited device features or chal... | CM-7 | SR 7.7 | CR 7.7 | 1. D. Parsons and D. Wylie. (2019, September). Practical Industrial Control System (ICS) Cybersecurity: IT and OT Have Converged – Discover and Defend Your Assets. Retrieved September 25, 2020.
2. Colin Gray. (n.d.). How SDN Can Improve Cybersecurity in OT Networks. Retrieved September 25, 2020.
3. Josh Rinaldi. (201... | https://www.csiac.org/journal-article/practical-industrial-control-system-ics-cybersecurity-it-and-ot-have-converged-discover-and-defend-your-assets/
https://cdn.selinc.com/assets/Literature/Publications/Technical%20Papers/6891_HowSDN_CG_20180720_Web2.pdf?v=20190312-231901
https://www.rtautomation.com/rtas-blog/still... | Device Configuration/Parameters | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0814 | https://attack.mitre.org/techniques/T0878 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Static Network Configuration | null | M0814 | Configure hosts and devices to use static network configurations when possible, protocols that require dynamic discovery/addressing (e.g., ARP, DHCP, DNS) can be used to manipulate network message forwarding and enable various MitM attacks. This mitigation may not always be usable due to limited device features or chal... | CM-7 | SR 7.7 | CR 7.7 | 1. D. Parsons and D. Wylie. (2019, September). Practical Industrial Control System (ICS) Cybersecurity: IT and OT Have Converged – Discover and Defend Your Assets. Retrieved September 25, 2020.
2. Colin Gray. (n.d.). How SDN Can Improve Cybersecurity in OT Networks. Retrieved September 25, 2020.
3. Josh Rinaldi. (201... | https://www.csiac.org/journal-article/practical-industrial-control-system-ics-cybersecurity-it-and-ot-have-converged-discover-and-defend-your-assets/
https://cdn.selinc.com/assets/Literature/Publications/Technical%20Papers/6891_HowSDN_CG_20180720_Web2.pdf?v=20190312-231901
https://www.rtautomation.com/rtas-blog/still... | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0814 | https://attack.mitre.org/techniques/T0878 |
Alarm Suppression | T0878 | Adversaries may target protection function alarms to prevent them from notifying operators of critical conditions. Alarm messages may be a part of an overall reporting system and of particular interest for adversaries. Disruption of the alarm system does not imply the disruption of the reporting system as a whole. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Static Network Configuration | null | M0814 | Configure hosts and devices to use static network configurations when possible, protocols that require dynamic discovery/addressing (e.g., ARP, DHCP, DNS) can be used to manipulate network message forwarding and enable various MitM attacks. This mitigation may not always be usable due to limited device features or chal... | CM-7 | SR 7.7 | CR 7.7 | 1. D. Parsons and D. Wylie. (2019, September). Practical Industrial Control System (ICS) Cybersecurity: IT and OT Have Converged – Discover and Defend Your Assets. Retrieved September 25, 2020.
2. Colin Gray. (n.d.). How SDN Can Improve Cybersecurity in OT Networks. Retrieved September 25, 2020.
3. Josh Rinaldi. (201... | https://www.csiac.org/journal-article/practical-industrial-control-system-ics-cybersecurity-it-and-ot-have-converged-discover-and-defend-your-assets/
https://cdn.selinc.com/assets/Literature/Publications/Technical%20Papers/6891_HowSDN_CG_20180720_Web2.pdf?v=20190312-231901
https://www.rtautomation.com/rtas-blog/still... | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0814 | https://attack.mitre.org/techniques/T0878 |
Automated Collection | T0802 | Adversaries may automate collection of industrial environment information using tools or scripts. This automated collection may leverage native control protocols and tools available in the control systems environment. For example, the OPC protocol may be used to enumerate and gather information. Access to a system or i... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Control Server | Command: Command Execution, File: File Access, Script: Script Execution, Network Traffic: Network Traffic Content | Level 2 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0802 |
Automated Collection | T0802 | Adversaries may automate collection of industrial environment information using tools or scripts. This automated collection may leverage native control protocols and tools available in the control systems environment. For example, the OPC protocol may be used to enumerate and gather information. Access to a system or i... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Command: Command Execution, File: File Access, Script: Script Execution, Network Traffic: Network Traffic Content | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0802 |
Automated Collection | T0802 | Adversaries may automate collection of industrial environment information using tools or scripts. This automated collection may leverage native control protocols and tools available in the control systems environment. For example, the OPC protocol may be used to enumerate and gather information. Access to a system or i... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Safety Instrumented System/Protection Relay | Command: Command Execution, File: File Access, Script: Script Execution, Network Traffic: Network Traffic Content | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0802 |
Automated Collection | T0802 | Adversaries may automate collection of industrial environment information using tools or scripts. This automated collection may leverage native control protocols and tools available in the control systems environment. For example, the OPC protocol may be used to enumerate and gather information. Access to a system or i... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Control Server | Command: Command Execution, File: File Access, Script: Script Execution, Network Traffic: Network Traffic Content | Level 2 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0802 |
Automated Collection | T0802 | Adversaries may automate collection of industrial environment information using tools or scripts. This automated collection may leverage native control protocols and tools available in the control systems environment. For example, the OPC protocol may be used to enumerate and gather information. Access to a system or i... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Command: Command Execution, File: File Access, Script: Script Execution, Network Traffic: Network Traffic Content | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0802 |
Automated Collection | T0802 | Adversaries may automate collection of industrial environment information using tools or scripts. This automated collection may leverage native control protocols and tools available in the control systems environment. For example, the OPC protocol may be used to enumerate and gather information. Access to a system or i... | Collection | The adversary is trying to gather data of interest and domain knowledge on your ICS environment to inform their goal. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Safety Instrumented System/Protection Relay | Command: Command Execution, File: File Access, Script: Script Execution, Network Traffic: Network Traffic Content | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0802 |
Block Command Message | T0803 | Adversaries may block a command message from reaching its intended target to prevent command execution. In OT networks, command messages are sent to provide instructions to control system devices. A blocked command message can inhibit response functions from correcting a disruption or unsafe condition. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Device Configuration/Parameters | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0803 |
Block Command Message | T0803 | Adversaries may block a command message from reaching its intended target to prevent command execution. In OT networks, command messages are sent to provide instructions to control system devices. A blocked command message can inhibit response functions from correcting a disruption or unsafe condition. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0803 |
Block Command Message | T0803 | Adversaries may block a command message from reaching its intended target to prevent command execution. In OT networks, command messages are sent to provide instructions to control system devices. A blocked command message can inhibit response functions from correcting a disruption or unsafe condition. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Device Configuration/Parameters | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0803 |
Block Command Message | T0803 | Adversaries may block a command message from reaching its intended target to prevent command execution. In OT networks, command messages are sent to provide instructions to control system devices. A blocked command message can inhibit response functions from correcting a disruption or unsafe condition. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0803 |
Block Command Message | T0803 | Adversaries may block a command message from reaching its intended target to prevent command execution. In OT networks, command messages are sent to provide instructions to control system devices. A blocked command message can inhibit response functions from correcting a disruption or unsafe condition. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Static Network Configuration | null | M0814 | Configure hosts and devices to use static network configurations when possible, protocols that require dynamic discovery/addressing (e.g., ARP, DHCP, DNS) can be used to manipulate network message forwarding and enable various MitM attacks. This mitigation may not always be usable due to limited device features or chal... | CM-7 | SR 7.7 | CR 7.7 | 1. D. Parsons and D. Wylie. (2019, September). Practical Industrial Control System (ICS) Cybersecurity: IT and OT Have Converged – Discover and Defend Your Assets. Retrieved September 25, 2020.
2. Colin Gray. (n.d.). How SDN Can Improve Cybersecurity in OT Networks. Retrieved September 25, 2020.
3. Josh Rinaldi. (201... | https://www.csiac.org/journal-article/practical-industrial-control-system-ics-cybersecurity-it-and-ot-have-converged-discover-and-defend-your-assets/
https://cdn.selinc.com/assets/Literature/Publications/Technical%20Papers/6891_HowSDN_CG_20180720_Web2.pdf?v=20190312-231901
https://www.rtautomation.com/rtas-blog/still... | Device Configuration/Parameters | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0814 | https://attack.mitre.org/techniques/T0803 |
Block Command Message | T0803 | Adversaries may block a command message from reaching its intended target to prevent command execution. In OT networks, command messages are sent to provide instructions to control system devices. A blocked command message can inhibit response functions from correcting a disruption or unsafe condition. | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Static Network Configuration | null | M0814 | Configure hosts and devices to use static network configurations when possible, protocols that require dynamic discovery/addressing (e.g., ARP, DHCP, DNS) can be used to manipulate network message forwarding and enable various MitM attacks. This mitigation may not always be usable due to limited device features or chal... | CM-7 | SR 7.7 | CR 7.7 | 1. D. Parsons and D. Wylie. (2019, September). Practical Industrial Control System (ICS) Cybersecurity: IT and OT Have Converged – Discover and Defend Your Assets. Retrieved September 25, 2020.
2. Colin Gray. (n.d.). How SDN Can Improve Cybersecurity in OT Networks. Retrieved September 25, 2020.
3. Josh Rinaldi. (201... | https://www.csiac.org/journal-article/practical-industrial-control-system-ics-cybersecurity-it-and-ot-have-converged-discover-and-defend-your-assets/
https://cdn.selinc.com/assets/Literature/Publications/Technical%20Papers/6891_HowSDN_CG_20180720_Web2.pdf?v=20190312-231901
https://www.rtautomation.com/rtas-blog/still... | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0814 | https://attack.mitre.org/techniques/T0803 |
Block Reporting Message | T0804 | Adversaries may block or prevent a reporting message from reaching its intended target. In control systems, reporting messages contain telemetry data (e.g., I/O values) pertaining to the current state of equipment and the industrial process. By blocking these reporting messages, an adversary can potentially hide their ... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Device Configuration/Parameters | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0804 |
Block Reporting Message | T0804 | Adversaries may block or prevent a reporting message from reaching its intended target. In control systems, reporting messages contain telemetry data (e.g., I/O values) pertaining to the current state of equipment and the industrial process. By blocking these reporting messages, an adversary can potentially hide their ... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0804 |
Block Reporting Message | T0804 | Adversaries may block or prevent a reporting message from reaching its intended target. In control systems, reporting messages contain telemetry data (e.g., I/O values) pertaining to the current state of equipment and the industrial process. By blocking these reporting messages, an adversary can potentially hide their ... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Input/Output Server | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 2 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0804 |
Block Reporting Message | T0804 | Adversaries may block or prevent a reporting message from reaching its intended target. In control systems, reporting messages contain telemetry data (e.g., I/O values) pertaining to the current state of equipment and the industrial process. By blocking these reporting messages, an adversary can potentially hide their ... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Device Configuration/Parameters | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0804 |
Block Reporting Message | T0804 | Adversaries may block or prevent a reporting message from reaching its intended target. In control systems, reporting messages contain telemetry data (e.g., I/O values) pertaining to the current state of equipment and the industrial process. By blocking these reporting messages, an adversary can potentially hide their ... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0804 |
Block Reporting Message | T0804 | Adversaries may block or prevent a reporting message from reaching its intended target. In control systems, reporting messages contain telemetry data (e.g., I/O values) pertaining to the current state of equipment and the industrial process. By blocking these reporting messages, an adversary can potentially hide their ... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Input/Output Server | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 2 | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0804 |
Block Reporting Message | T0804 | Adversaries may block or prevent a reporting message from reaching its intended target. In control systems, reporting messages contain telemetry data (e.g., I/O values) pertaining to the current state of equipment and the industrial process. By blocking these reporting messages, an adversary can potentially hide their ... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Static Network Configuration | null | M0814 | Configure hosts and devices to use static network configurations when possible, protocols that require dynamic discovery/addressing (e.g., ARP, DHCP, DNS) can be used to manipulate network message forwarding and enable various MitM attacks. This mitigation may not always be usable due to limited device features or chal... | CM-7 | SR 7.7 | CR 7.7 | 1. D. Parsons and D. Wylie. (2019, September). Practical Industrial Control System (ICS) Cybersecurity: IT and OT Have Converged – Discover and Defend Your Assets. Retrieved September 25, 2020.
2. Colin Gray. (n.d.). How SDN Can Improve Cybersecurity in OT Networks. Retrieved September 25, 2020.
3. Josh Rinaldi. (201... | https://www.csiac.org/journal-article/practical-industrial-control-system-ics-cybersecurity-it-and-ot-have-converged-discover-and-defend-your-assets/
https://cdn.selinc.com/assets/Literature/Publications/Technical%20Papers/6891_HowSDN_CG_20180720_Web2.pdf?v=20190312-231901
https://www.rtautomation.com/rtas-blog/still... | Device Configuration/Parameters | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0814 | https://attack.mitre.org/techniques/T0804 |
Block Reporting Message | T0804 | Adversaries may block or prevent a reporting message from reaching its intended target. In control systems, reporting messages contain telemetry data (e.g., I/O values) pertaining to the current state of equipment and the industrial process. By blocking these reporting messages, an adversary can potentially hide their ... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Static Network Configuration | null | M0814 | Configure hosts and devices to use static network configurations when possible, protocols that require dynamic discovery/addressing (e.g., ARP, DHCP, DNS) can be used to manipulate network message forwarding and enable various MitM attacks. This mitigation may not always be usable due to limited device features or chal... | CM-7 | SR 7.7 | CR 7.7 | 1. D. Parsons and D. Wylie. (2019, September). Practical Industrial Control System (ICS) Cybersecurity: IT and OT Have Converged – Discover and Defend Your Assets. Retrieved September 25, 2020.
2. Colin Gray. (n.d.). How SDN Can Improve Cybersecurity in OT Networks. Retrieved September 25, 2020.
3. Josh Rinaldi. (201... | https://www.csiac.org/journal-article/practical-industrial-control-system-ics-cybersecurity-it-and-ot-have-converged-discover-and-defend-your-assets/
https://cdn.selinc.com/assets/Literature/Publications/Technical%20Papers/6891_HowSDN_CG_20180720_Web2.pdf?v=20190312-231901
https://www.rtautomation.com/rtas-blog/still... | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0814 | https://attack.mitre.org/techniques/T0804 |
Block Reporting Message | T0804 | Adversaries may block or prevent a reporting message from reaching its intended target. In control systems, reporting messages contain telemetry data (e.g., I/O values) pertaining to the current state of equipment and the industrial process. By blocking these reporting messages, an adversary can potentially hide their ... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Static Network Configuration | null | M0814 | Configure hosts and devices to use static network configurations when possible, protocols that require dynamic discovery/addressing (e.g., ARP, DHCP, DNS) can be used to manipulate network message forwarding and enable various MitM attacks. This mitigation may not always be usable due to limited device features or chal... | CM-7 | SR 7.7 | CR 7.7 | 1. D. Parsons and D. Wylie. (2019, September). Practical Industrial Control System (ICS) Cybersecurity: IT and OT Have Converged – Discover and Defend Your Assets. Retrieved September 25, 2020.
2. Colin Gray. (n.d.). How SDN Can Improve Cybersecurity in OT Networks. Retrieved September 25, 2020.
3. Josh Rinaldi. (201... | https://www.csiac.org/journal-article/practical-industrial-control-system-ics-cybersecurity-it-and-ot-have-converged-discover-and-defend-your-assets/
https://cdn.selinc.com/assets/Literature/Publications/Technical%20Papers/6891_HowSDN_CG_20180720_Web2.pdf?v=20190312-231901
https://www.rtautomation.com/rtas-blog/still... | Input/Output Server | Network Traffic: Network Traffic Flow, Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 2 | https://attack.mitre.org/mitigations/M0814 | https://attack.mitre.org/techniques/T0804 |
Block Serial COM | T0805 | Adversaries may block access to serial COM to prevent instructions or configurations from reaching target devices. Serial Communication ports (COM) allow communication with control system devices. Devices can receive command and configuration messages over such serial COM. Devices also use serial COM to send command an... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Device Configuration/Parameters | Network Traffic: Network Traffic Flow
Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0805 |
Block Serial COM | T0805 | Adversaries may block access to serial COM to prevent instructions or configurations from reaching target devices. Serial Communication ports (COM) allow communication with control system devices. Devices can receive command and configuration messages over such serial COM. Devices also use serial COM to send command an... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow
Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0805 |
Block Serial COM | T0805 | Adversaries may block access to serial COM to prevent instructions or configurations from reaching target devices. Serial Communication ports (COM) allow communication with control system devices. Devices can receive command and configuration messages over such serial COM. Devices also use serial COM to send command an... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Input/Output Server | Network Traffic: Network Traffic Flow
Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 2 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0805 |
Block Serial COM | T0805 | Adversaries may block access to serial COM to prevent instructions or configurations from reaching target devices. Serial Communication ports (COM) allow communication with control system devices. Devices can receive command and configuration messages over such serial COM. Devices also use serial COM to send command an... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Device Configuration/Parameters | Network Traffic: Network Traffic Flow
Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0805 |
Block Serial COM | T0805 | Adversaries may block access to serial COM to prevent instructions or configurations from reaching target devices. Serial Communication ports (COM) allow communication with control system devices. Devices can receive command and configuration messages over such serial COM. Devices also use serial COM to send command an... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow
Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0805 |
Block Serial COM | T0805 | Adversaries may block access to serial COM to prevent instructions or configurations from reaching target devices. Serial Communication ports (COM) allow communication with control system devices. Devices can receive command and configuration messages over such serial COM. Devices also use serial COM to send command an... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Input/Output Server | Network Traffic: Network Traffic Flow
Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 2 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0805 |
Block Serial COM | T0805 | Adversaries may block access to serial COM to prevent instructions or configurations from reaching target devices. Serial Communication ports (COM) allow communication with control system devices. Devices can receive command and configuration messages over such serial COM. Devices also use serial COM to send command an... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Device Configuration/Parameters | Network Traffic: Network Traffic Flow
Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | No Level Identified | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0805 |
Block Serial COM | T0805 | Adversaries may block access to serial COM to prevent instructions or configurations from reaching target devices. Serial Communication ports (COM) allow communication with control system devices. Devices can receive command and configuration messages over such serial COM. Devices also use serial COM to send command an... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Flow
Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0805 |
Block Serial COM | T0805 | Adversaries may block access to serial COM to prevent instructions or configurations from reaching target devices. Serial Communication ports (COM) allow communication with control system devices. Devices can receive command and configuration messages over such serial COM. Devices also use serial COM to send command an... | Inhibit Response Function | The adversary is trying to prevent your safety, protection, quality assurance, and operator intervention functions from responding to a failure, hazard, or unsafe state. | Out-of-Band Communications Channel | null | M0810 | Have alternative methods to support communication requirements during communication failures and data integrity attacks. [1] [2] | SC-37 | null | null | 1. National Institute of Standards and Technology. (2013, April). Security and Privacy Controls for Federal Information Systems and Organizations. Retrieved September 17, 2020. | https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf | Input/Output Server | Network Traffic: Network Traffic Flow
Network Traffic: Network Connection Creation, Application Log: Application Log Content, Process: Process Termination, Operational Databases: Process History/Live Data, Operational Databases: Process/Event Alarm | Level 2 | https://attack.mitre.org/mitigations/M0810 | https://attack.mitre.org/techniques/T0805 |
Brute Force I/O | T0806 | Adversaries may repetitively or successively change I/O point values to perform an action. Brute Force I/O may be achieved by changing either a range of I/O point values or a single point value repeatedly to manipulate a process function. The adversarys goal and the information they have about the target environment wi... | Impair Process Control | The adversary is trying to manipulate, disable, or damage physical control processes. | Filter Network Traffic | null | M0937 | Use network appliances to filter ingress or egress traffic and perform protocol-based filtering. Configure software on endpoints to filter network traffic. Perform inline allow/denylisting of network messages based on the application layer (OSI Layer 7) protocol, especially for automation protocols. Application allowli... | AC-3; SC-7 | SR 5.1 | CR 5.1 | 1. Centre for the Protection of National Infrastructure 2005, February FIREWALL DEPLOYMENT FOR SCADA AND PROCESS CONTROL NETWORKS Retrieved. 2020/09/17 | https://www.energy.gov/sites/prod/files/Good%20Practices%20Guide%20for%20Firewall%20Deployment.pdf | Control Server | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data | Level 2 | https://attack.mitre.org/mitigations/M0937 | https://attack.mitre.org/techniques/T0806 |
Brute Force I/O | T0806 | Adversaries may repetitively or successively change I/O point values to perform an action. Brute Force I/O may be achieved by changing either a range of I/O point values or a single point value repeatedly to manipulate a process function. The adversarys goal and the information they have about the target environment wi... | Impair Process Control | The adversary is trying to manipulate, disable, or damage physical control processes. | Filter Network Traffic | null | M0937 | Use network appliances to filter ingress or egress traffic and perform protocol-based filtering. Configure software on endpoints to filter network traffic. Perform inline allow/denylisting of network messages based on the application layer (OSI Layer 7) protocol, especially for automation protocols. Application allowli... | AC-3; SC-7 | SR 5.1 | CR 5.1 | 1. Centre for the Protection of National Infrastructure 2005, February FIREWALL DEPLOYMENT FOR SCADA AND PROCESS CONTROL NETWORKS Retrieved. 2020/09/17 | https://www.energy.gov/sites/prod/files/Good%20Practices%20Guide%20for%20Firewall%20Deployment.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0937 | https://attack.mitre.org/techniques/T0806 |
Brute Force I/O | T0806 | Adversaries may repetitively or successively change I/O point values to perform an action. Brute Force I/O may be achieved by changing either a range of I/O point values or a single point value repeatedly to manipulate a process function. The adversarys goal and the information they have about the target environment wi... | Impair Process Control | The adversary is trying to manipulate, disable, or damage physical control processes. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Control Server | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data | Level 2 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0806 |
Brute Force I/O | T0806 | Adversaries may repetitively or successively change I/O point values to perform an action. Brute Force I/O may be achieved by changing either a range of I/O point values or a single point value repeatedly to manipulate a process function. The adversarys goal and the information they have about the target environment wi... | Impair Process Control | The adversary is trying to manipulate, disable, or damage physical control processes. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0806 |
Brute Force I/O | T0806 | Adversaries may repetitively or successively change I/O point values to perform an action. Brute Force I/O may be achieved by changing either a range of I/O point values or a single point value repeatedly to manipulate a process function. The adversarys goal and the information they have about the target environment wi... | Impair Process Control | The adversary is trying to manipulate, disable, or damage physical control processes. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Control Server | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data | Level 2 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0806 |
Brute Force I/O | T0806 | Adversaries may repetitively or successively change I/O point values to perform an action. Brute Force I/O may be achieved by changing either a range of I/O point values or a single point value repeatedly to manipulate a process function. The adversarys goal and the information they have about the target environment wi... | Impair Process Control | The adversary is trying to manipulate, disable, or damage physical control processes. | Network Segmentation | null | M0930 | Architect sections of the network to isolate critical systems, functions, or resources. Use physical and logical segmentation to prevent access to potentially sensitive systems and information. Use a DMZ to contain any internet-facing services that should not be exposed from the internal network. Restrict network acces... | AC-3 | SR 5.1 | CR 5.1 | 3. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0930 | https://attack.mitre.org/techniques/T0806 |
Brute Force I/O | T0806 | Adversaries may repetitively or successively change I/O point values to perform an action. Brute Force I/O may be achieved by changing either a range of I/O point values or a single point value repeatedly to manipulate a process function. The adversarys goal and the information they have about the target environment wi... | Impair Process Control | The adversary is trying to manipulate, disable, or damage physical control processes. | Software Process and Device Authentication | null | M0813 | Require the authentication of devices and software processes where appropriate. Devices that connect remotely to other systems should require strong authentication to prevent spoofing of communications. Furthermore, software processes should also require authentication when accessing APIs. | IA-9 | SR 1.2 | CR 1.2 | null | null | Control Server | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data | Level 2 | https://attack.mitre.org/mitigations/M0813 | https://attack.mitre.org/techniques/T0806 |
Brute Force I/O | T0806 | Adversaries may repetitively or successively change I/O point values to perform an action. Brute Force I/O may be achieved by changing either a range of I/O point values or a single point value repeatedly to manipulate a process function. The adversarys goal and the information they have about the target environment wi... | Impair Process Control | The adversary is trying to manipulate, disable, or damage physical control processes. | Software Process and Device Authentication | null | M0813 | Require the authentication of devices and software processes where appropriate. Devices that connect remotely to other systems should require strong authentication to prevent spoofing of communications. Furthermore, software processes should also require authentication when accessing APIs. | IA-9 | SR 1.2 | CR 1.2 | null | null | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Process History/Live Data | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0813 | https://attack.mitre.org/techniques/T0806 |
Change Operating Mode | T0858 | Adversaries may change the operating mode of a controller to gain additional access to engineering functions such as Program Download. Programmable controllers typically have several modes of operation that control the state of the user program and control access to the controllers API. Operating modes can be physicall... | Execution, Evasion | The adversary is trying to run code or manipulate system functions, parameters, and data in an unauthorized way.
The adversary is trying to avoid security defenses. | Access Management | null | M0801 | Access Management technologies can be used to enforce authorization polices and decisions, especially when existing field devices do not provided sufficient capabilities to support user identification and authentication. [1] These technologies typically utilize an in-line network device or gateway system to prevent acc... | AC-3 | SR 2.1 | CR 2.1 | 1. McCarthy, J et al.. (2018, July). NIST SP 1800-2 Identity and Access Management for Electric Utilities. Retrieved September 17, 2020. | https://doi.org/10.6028/NIST.SP.1800-2 | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0801 | https://attack.mitre.org/techniques/T0858 |
Change Operating Mode | T0858 | Adversaries may change the operating mode of a controller to gain additional access to engineering functions such as Program Download. Programmable controllers typically have several modes of operation that control the state of the user program and control access to the controllers API. Operating modes can be physicall... | Execution, Evasion | The adversary is trying to run code or manipulate system functions, parameters, and data in an unauthorized way.
The adversary is trying to avoid security defenses. | Access Management | null | M0801 | Access Management technologies can be used to enforce authorization polices and decisions, especially when existing field devices do not provided sufficient capabilities to support user identification and authentication. [1] These technologies typically utilize an in-line network device or gateway system to prevent acc... | AC-3 | SR 2.1 | CR 2.1 | 1. McCarthy, J et al.. (2018, July). NIST SP 1800-2 Identity and Access Management for Electric Utilities. Retrieved September 17, 2020. | https://doi.org/10.6028/NIST.SP.1800-2 | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0801 | https://attack.mitre.org/techniques/T0858 |
Change Operating Mode | T0858 | Adversaries may change the operating mode of a controller to gain additional access to engineering functions such as Program Download. Programmable controllers typically have several modes of operation that control the state of the user program and control access to the controllers API. Operating modes can be physicall... | Execution, Evasion | The adversary is trying to run code or manipulate system functions, parameters, and data in an unauthorized way.
The adversary is trying to avoid security defenses. | Authorization Enforcement | null | M0800 | The device or system should restrict read, manipulate, or execute privileges to only authenticated users who require access based on approved security policies. Role-based Access Control (RBAC) schemes can help reduce the overhead of assigning permissions to the large number of devices within an ICS. For example, IEC 6... | AC-3 | SR 2.1 | CR 2.1 | 3. MITRE. (2020, June). CWE CATEGORY: 7PK - API Abuse. Retrieved September 25, 2020. | https://cwe.mitre.org/data/definitions/227.html | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0800 | https://attack.mitre.org/techniques/T0858 |
Change Operating Mode | T0858 | Adversaries may change the operating mode of a controller to gain additional access to engineering functions such as Program Download. Programmable controllers typically have several modes of operation that control the state of the user program and control access to the controllers API. Operating modes can be physicall... | Execution, Evasion | The adversary is trying to run code or manipulate system functions, parameters, and data in an unauthorized way.
The adversary is trying to avoid security defenses. | Authorization Enforcement | null | M0800 | The device or system should restrict read, manipulate, or execute privileges to only authenticated users who require access based on approved security policies. Role-based Access Control (RBAC) schemes can help reduce the overhead of assigning permissions to the large number of devices within an ICS. For example, IEC 6... | AC-3 | SR 2.1 | CR 2.1 | 3. MITRE. (2020, June). CWE CATEGORY: 7PK - API Abuse. Retrieved September 25, 2020. | https://cwe.mitre.org/data/definitions/227.html | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0800 | https://attack.mitre.org/techniques/T0858 |
Change Operating Mode | T0858 | Adversaries may change the operating mode of a controller to gain additional access to engineering functions such as Program Download. Programmable controllers typically have several modes of operation that control the state of the user program and control access to the controllers API. Operating modes can be physicall... | Execution, Evasion | The adversary is trying to run code or manipulate system functions, parameters, and data in an unauthorized way.
The adversary is trying to avoid security defenses. | Communication Authenticity | null | M0802 | When communicating over an untrusted network, utilize secure network protocols that both authenticate the message sender and can verify its integrity. This can be done either through message authentication codes (MACs) or digital signatures, to detect spoofed network messages and unauthorized connections. | SC-8; SC-23 | SR 3.1 | CR 3.1 | 1. CISA. (2010, March 11). https://us-cert.cisa.gov/ncas/tips/ST05-003. Retrieved September 25, 2020. | https://us-cert.cisa.gov/ncas/tips/ST05-003 | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0802 | https://attack.mitre.org/techniques/T0858 |
Change Operating Mode | T0858 | Adversaries may change the operating mode of a controller to gain additional access to engineering functions such as Program Download. Programmable controllers typically have several modes of operation that control the state of the user program and control access to the controllers API. Operating modes can be physicall... | Execution, Evasion | The adversary is trying to run code or manipulate system functions, parameters, and data in an unauthorized way.
The adversary is trying to avoid security defenses. | Communication Authenticity | null | M0802 | When communicating over an untrusted network, utilize secure network protocols that both authenticate the message sender and can verify its integrity. This can be done either through message authentication codes (MACs) or digital signatures, to detect spoofed network messages and unauthorized connections. | SC-8; SC-23 | SR 3.1 | CR 3.1 | 1. CISA. (2010, March 11). https://us-cert.cisa.gov/ncas/tips/ST05-003. Retrieved September 25, 2020. | https://us-cert.cisa.gov/ncas/tips/ST05-003 | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0802 | https://attack.mitre.org/techniques/T0858 |
Change Operating Mode | T0858 | Adversaries may change the operating mode of a controller to gain additional access to engineering functions such as Program Download. Programmable controllers typically have several modes of operation that control the state of the user program and control access to the controllers API. Operating modes can be physicall... | Execution, Evasion | The adversary is trying to run code or manipulate system functions, parameters, and data in an unauthorized way.
The adversary is trying to avoid security defenses. | Human User Authentication | null | M0804 | Require user authentication before allowing access to data or accepting commands to a device. While strong multi-factor authentication is preferable, it is not always feasible within ICS environments. Performing strong user authentication also requires additional security controls and processes which are often the targ... | IA-2 | SR 1.1 | CR 1.1 | null | null | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0804 | https://attack.mitre.org/techniques/T0858 |
Change Operating Mode | T0858 | Adversaries may change the operating mode of a controller to gain additional access to engineering functions such as Program Download. Programmable controllers typically have several modes of operation that control the state of the user program and control access to the controllers API. Operating modes can be physicall... | Execution, Evasion | The adversary is trying to run code or manipulate system functions, parameters, and data in an unauthorized way.
The adversary is trying to avoid security defenses. | Human User Authentication | null | M0804 | Require user authentication before allowing access to data or accepting commands to a device. While strong multi-factor authentication is preferable, it is not always feasible within ICS environments. Performing strong user authentication also requires additional security controls and processes which are often the targ... | IA-2 | SR 1.1 | CR 1.1 | null | null | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0804 | https://attack.mitre.org/techniques/T0858 |
Change Operating Mode | T0858 | Adversaries may change the operating mode of a controller to gain additional access to engineering functions such as Program Download. Programmable controllers typically have several modes of operation that control the state of the user program and control access to the controllers API. Operating modes can be physicall... | Execution, Evasion | The adversary is trying to run code or manipulate system functions, parameters, and data in an unauthorized way.
The adversary is trying to avoid security defenses. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Field Controller/RTU/PLC/IED | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0858 |
Change Operating Mode | T0858 | Adversaries may change the operating mode of a controller to gain additional access to engineering functions such as Program Download. Programmable controllers typically have several modes of operation that control the state of the user program and control access to the controllers API. Operating modes can be physicall... | Execution, Evasion | The adversary is trying to run code or manipulate system functions, parameters, and data in an unauthorized way.
The adversary is trying to avoid security defenses. | Network Allowlists | null | M0807 | Network allowlists can be implemented through either host-based files or system hosts files to specify what connections (e.g., IP address, MAC address, port, protocol) can be made from a device. Allowlist techniques that operate at the application layer (e.g., DNP3, Modbus, HTTP) are addressed in Filter Network Traffic... | AC-3 | null | null | 1. Department of Homeland Security. (2016, September). Retrieved September 25, 2020. | https://us-cert.cisa.gov/sites/default/files/recommended_practices/NCCIC_ICS-CERT_Defense_in_Depth_2016_S508C.pdf | Safety Instrumented System/Protection Relay | Network Traffic: Network Traffic Content, Application Log: Application Log Content, Operational Databases: Device Alarm | Level 0 Level 1 | https://attack.mitre.org/mitigations/M0807 | https://attack.mitre.org/techniques/T0858 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.