{ "dataset": "AssemblyWorld/assemblybench", "revision": "266e883e1676af42c44c41484c77b662b987b966", "split": "official test (280)", "terms": [ "gun", "rifle", "pistol", "firearm", "barrel", "trigger", "magazine", "ammo", "bullet", "knife", "blade", "sword", "weapon", "grenade", "bomb", "crossbow", "bow", "scope", "muzzle" ], "hits": [ { "sample_id": "1047", "terms": [ "blade" ], "parts": [ "Core Body", "Base Support", "Handle", "Blade", "Crank", "Cap" ], "manual": "Place core body in the center. | Attach the handle to the designated slot on the core body by aligning the pins and pressing it into place. | Insert the blade into the designated slot at the top of the core body. | Place the cap onto the top opening of the core body. | Place the crank onto the core body as shown in the diagram. | Attach the base support to the bottom of the assembly as shown.", "decision": "keep", "note": "Blade with Crank, Handle, Cap: hand tool" }, { "sample_id": "1717", "terms": [ "barrel" ], "parts": [ "Adjustment Screw", "Adjustment Screw", "Clamp Body", "Barrel Core" ], "manual": "Place clamp body to the center. | Insert the barrel core into the designated opening on the clamp body. | Insert the adjustment screw into the clamp body. | Install the adjustment screw into the designated hole on the clamp body.", "decision": "keep", "note": "Barrel Core is a clamp body" }, { "sample_id": "1874", "terms": [ "barrel" ], "parts": [ "Clamp", "Clamp", "Base Block", "Barrel Tube", "Support Bar", "Main Beam", "Alignment Pin" ], "manual": "Place main beam to the center. | Attach the main beam onto the barrel tube. | Attach the main beam onto the support bar. | Attach the clamp to secure the barrel tube and support bar together. | Slide the clamp onto the barrel tube and align it with the support bar. | Attach the base block to the main beam. | Insert the alignment pin into the designated hole on the assembly.", "decision": "exclude", "note": "Barrel Tube on Base Block and Main Beam: assembled shape reads as a cannon barrel (geometry review 2026-09-16)" }, { "sample_id": "2651", "terms": [ "blade" ], "parts": [ "Frame", "Top Cover", "Fin Blade", "Pin", "Pin", "Middle Divider", "End Cap", "Latch", "Guide Panel", "Support Plate", "Spacer Block", "Retainer Clip", "Alignment Bridge" ], "manual": "Place fin blade to the center. | Attach the guide panel to the designated position on the main assembly as shown. | Attach the middle divider to the main assembly as shown. | Attach the end cap to the bottom of the assembly as shown. | Attach the support plate to the assembly as shown, ensuring it aligns with the designated slots. | Insert the pin into the designated slot at the top of the assembl", "decision": "keep", "note": "Fin Blade with Frame, Top Cover, Divider: fan housing" }, { "sample_id": "2944", "terms": [ "blade" ], "parts": [ "Core", "Blade", "Blade", "End Cap", "End Cap", "Clip", "Clip", "Clip", "Clip" ], "manual": "Place core in the center. | Attach the end cap to the end of the core. | Attach the clip to the designated position on the core. | Attach the blade to the assembly. | Attach the end cap to the end of the core. | Attach the clip to the end cap at the designated location. | Attach the blade to the end of the core, ensuring it is securely positioned as shown. | Attach the clip to the designated posit", "decision": "unreviewed" }, { "sample_id": "3374", "terms": [ "blade" ], "parts": [ "Base", "Blades", "Blades", "Blades" ], "manual": "Place base in the center. | Attach the blade to the top of the base. | Attach the blade to the designated slot on the base. | Insert the blade into the slot on the top of the base.", "decision": "unreviewed" }, { "sample_id": "3429", "terms": [ "blade" ], "parts": [ "Outer Frame", "Blade", "Blade", "Blade", "Blade", "Blade", "Blade" ], "manual": "Place blade to the center. | Attach the blade to the indicated position on the structure. | Attach the blade to the central assembly as shown. | Attach the outer frame to the assembly. | Attach the blade to the central hub, ensuring it is securely positioned within the outer frame. | Attach the blade to the central hub of the outer frame, ensuring it is securely fitted in place. | Insert the blade", "decision": "unreviewed" }, { "sample_id": "3436", "terms": [ "blade" ], "parts": [ "End Wing", "Central Rod", "Joint Block", "Blade" ], "manual": "Place joint block to the center. | Attach the joint block onto the central rod. | Attach the end wing to the central rod by aligning it as shown and securing it in place. | Attach the blade to the end wing as shown in the diagram.", "decision": "unreviewed" }, { "sample_id": "3905", "terms": [ "blade" ], "parts": [ "Frame Shell", "Blade Assembly", "Mounting Lug", "Mounting Lug", "Mounting Lug", "Mounting Lug", "Mounting Lug", "Mounting Lug", "Mounting Lug", "Mounting Lug", "Rod", "Rod", "Fastener", "Spacer", "Fastener", "Spacer", "Hex Nut", "Spacer", "Fastener", "Spacer" ], "manual": "Place frame shell to the center. | Attach the mounting lug to the frame shell. | Attach the mounting lug to the frame shell. | Attach the mounting lug to the designated position on the frame shell. | Attach the mounting lug to the designated corner of the frame shell. | Position the frame shell upright as shown in the image. | Attach the mounting lug to the frame shell. | Insert the rod into the d", "decision": "unreviewed" }, { "sample_id": "4096", "terms": [ "blade" ], "parts": [ "Edge", "Guard", "Block", "Mount", "Spacer", "Collar", "Capstone", "Butt" ], "manual": "Place edge in the center. | Slide the guard onto the tang of the blade until it fits securely in place. | Slide the mount onto the handle until it is secured in place. | Slide the collar onto the tang of the blade until it rests against the guard. | Slide the spacer onto the tang, positioning it flush against the collar. | Attach the block to the end of the pomer. | Attach the capstone to the end ", "decision": "unreviewed" }, { "sample_id": "4211", "terms": [ "trigger" ], "parts": [ "Actuation Arm", "End Block", "Switch Housing", "Support Bracket", "Retainer Block", "Trigger Plate", "Base Frame", "Extension Strip", "Actuation Arm" ], "manual": "Place trigger plate to the center. | Attach the support bracket to the main assembly as shown. | Install the retainer block onto the assembly as shown. | Attach the actuation arm to the main assembly by aligning its holes with the corresponding mounting points. | Attach the end block to the support bracket as shown, ensuring it is securely positioned. | Insert the extension strip into the assembly", "decision": "keep", "note": "Trigger Plate with Switch Housing, Actuation Arm: switch mechanism" }, { "sample_id": "429", "terms": [ "barrel" ], "parts": [ "Barrel", "Lens Cap", "Head", "Support Column" ], "manual": "Place support column in the center. | Attach the head onto the top of the assembly. | Attach the lens cap to the head. | Attach the barrel to the main assembly.", "decision": "keep", "note": "Barrel is a lens barrel (Lens Cap, Head, Support Column)" }, { "sample_id": "4293", "terms": [ "bow" ], "parts": [ "Lid", "Container", "Bow" ], "manual": "Place container in the center. | Place the lid on top of the container. | Place the bow onto the center of the lid.", "decision": "unreviewed" }, { "sample_id": "5125", "terms": [ "blade" ], "parts": [ "Support Column", "Blade", "Blade", "Blade", "Blade", "Blade", "Blade" ], "manual": "Place blade to the center. | Attach the blade to the assembly as shown. | Attach the blade to the designated section as shown in the diagram. | Attach the support column to the base. | Attach the blade to the top section of the support column. | Attach the blade to the top of the support column. | Attach the blade to the top of the support column, ensuring it is securely positioned.", "decision": "unreviewed" }, { "sample_id": "5292", "terms": [ "barrel", "trigger" ], "parts": [ "Barrel Ring", "Seal Ring", "Actuation Lever", "Handle", "Trigger Guard", "Grip", "End Cap", "Rear Ring", "Ribbed Sleeve", "Core Body", "Coupling Shell" ], "manual": "Place trigger guard to the center. | Attach the rear ring to the designated position on the main assembly. | Attach the trigger guard to the core body as shown. | Attach the end cap to the rear opening of the rear ring. | Attach the barrel ring to the core body. | Attach the trigger guard to the top of the grip and core body assembly. | Attach the seal ring to the end cap. | Slide the ribbed sleev", "decision": "exclude" }, { "sample_id": "569", "terms": [ "blade" ], "parts": [ "Shell Plate", "Tail Cap", "Neck", "Blade", "Blade", "Fin", "Fin" ], "manual": "Place fin to the center. | Attach the blade to the outlined section of the assembly as shown. | Attach the blade to the fin. | Attach the shell plate as the base component. | Attach the tail cap to the rear section of the shell plate, ensuring it fits securely into place. | Attach the neck to the shell plate by aligning the connection points and securing it in place. | Attach the fin to the main b", "decision": "keep", "note": "Blade/Fin are fan or turbine blades" }, { "sample_id": "6216", "terms": [ "blade" ], "parts": [ "Blades", "Blades", "Blades", "Blades", "Blades" ], "manual": "Place blades in the center. | Attach the blade to the designated position on the hub. | Attach the blade to the center hub as shown. | Attach the blade to the central hub by fitting it securely into the corresponding slot. | Attach the blade to the central hub by aligning its base with the corresponding slot and securing it in place.", "decision": "unreviewed" }, { "sample_id": "6221", "terms": [ "blade" ], "parts": [ "Grip Spacer", "Blade Assembly", "Handle Body", "Guard Block", "End Cap" ], "manual": "Place guard block to the center. | Attach the guard block to the assembly as shown. | Attach the guard block to the designated location as shown in the diagram. | Attach the guard block to the blade assembly as shown. | Attach the handle body to the blade assembly, ensuring they are securely aligned at the connection point.", "decision": "unreviewed" }, { "sample_id": "6327", "terms": [ "blade" ], "parts": [ "Cover Disc", "Insert Ring", "Core Blade" ], "manual": "Place core blade in the center. | Insert the ring onto the core blade. | Place the cover disc onto the center of the assembly, ensuring it fits securely over the core blade.", "decision": "unreviewed" }, { "sample_id": "6772", "terms": [ "barrel", "scope" ], "parts": [ "Frame", "Handle", "Base", "Rod", "Guard", "Barrel", "Tip", "Scope" ], "manual": "Place guard in the center. | Slide the barrel into position as shown in the diagram. | Insert the rod into the main assembly as shown. | Attach the scope to the top of the assembly. | Attach the handle to the main assembly as shown. | Attach the base to the assembly as shown. | Attach the frame to begin constructing the assembly. | Attach the tip to the end of the rod.", "decision": "exclude" }, { "sample_id": "735", "terms": [ "blade" ], "parts": [ "Core", "Blades", "Blades", "Blades" ], "manual": "Place core in the center. | Attach the blade to the core by aligning the blade and securing it in place as shown. | Attach the blade to the core by aligning the mounting points and securing it in place. | Attach the blade to the core by aligning the mounting holes and securing it in place.", "decision": "unreviewed" }, { "sample_id": "7636", "terms": [ "barrel" ], "parts": [ "Grip Band", "Closure Ring", "Barrel" ], "manual": "Place closure ring to the center. | Slide the closure ring over the open end of the barrel until it fits securely in place. | Attach the grip band to the end of the barrel.", "decision": "unreviewed" }, { "sample_id": "7903", "terms": [ "blade" ], "parts": [ "Blade", "Blade", "Handle", "Pivot Screw", "Connector Pin", "Handle", "Handle" ], "manual": "Place blade to the center. | Attach the second blade to the assembly by aligning it with the first blade at the central pivot point. | Attach the handle to the corresponding slot on the main assembly. | Install the pivot screw through the holes in the blades to secure them together. | Insert the connector pin through the aligned holes of the handle and blade. | Attach the handle to the correspondi", "decision": "unreviewed" } ] }