--- pretty_name: Robohand multi-view RGB-D hand capture tags: - rgb-d - depth - multi-view - hand - realsense - data-glove size_categories: - n<1K --- # Robohand multi-view RGB-D hand capture Raw sessions recorded with [Robohand](https://github.com/Ever2after/robohand): three Intel RealSense D405 cameras (colour + colour-aligned depth) on a shared host clock, one session with a MANUS data glove, and the ChArUco extrinsic calibrations used for the multi-camera point cloud. The data is the unprocessed output of the capture tool. It has no annotations and no train/test split. ## Layout ``` calibration.json # calibration that was active at the end of the last session recordings// session.json # devices, intrinsics, per-track stats, timing notes d405{,_2,_3}_color.mp4 # H.264, 640x480, 30 fps timeline d405{,_2,_3}_depth.mp4 # colourised depth preview (lossy, display only) d405{,_2,_3}_depth_raw.mkv # lossless FFV1 uint16 depth, aligned to the colour image d405{,_2,_3}_*_timestamps.csv # per-output-frame host timestamps and repeat flags *_encoder.log # ffmpeg logs manus.jsonl # (one session) MANUS glove ergonomics / skeleton / raw data calibrations/ checkerboard_/ # one ChArUco extrinsic calibration run calibration.json # result: per-camera T_board_from_camera, board size, residuals calibration_previous.json # the calibration it replaced highres/frame_XXX/ # captured colour + depth (.png / .npy) per camera overlays/ # detection overlays depth_scale_/ # board-scale fit against D405 depth (earlier board estimate) ``` ## Sessions All sessions: 3 x D405 at 640x480, 15 fps capture, written to a 30 fps timeline (frames repeated when no new sample arrived; see `repeated_frames` in `session.json`). | Session | Duration | Extra streams | Calibration in use (inferred from timestamps) | |---|---|---|---| | 20261117_134147_822622 | 24 s | - | checkerboard_20261116_222942 | | 20261117_141513_950731 | 103 s | - | checkerboard_20261117_140852 | | 20261117_142147_402231 | 102 s | - | checkerboard_20261117_142035 | | 20261117_143224_555777 | 95 s | - | checkerboard_20261117_142035 | | 20261117_143843_991204 | 137 s | MANUS glove (both hands) | checkerboard_20261117_142035 | | 20261117_144553_427534 | 26 s | - | checkerboard_20261117_144446 | `session.json` does not record which calibration was active. The last column is the most recent calibration written before the session started. ## Formats **Depth.** `*_depth_raw.mkv` holds uint16 frames (FFV1, `gray16le`). Metric depth in metres is `value * devices[camera_key].depth_scale_m` (1e-4 for the D405). The values `0` and `65535` mean no depth. Depth is aligned to the colour camera, so use the `color_intrinsics` from `session.json` for both. ```python import imageio_ffmpeg, numpy as np reader = imageio_ffmpeg.read_frames("d405_depth_raw.mkv", pix_fmt="gray16le") meta = next(reader) depth = np.frombuffer(next(reader), np.uint16).reshape(480, 640) # first frame ``` **Timing.** Every stream uses the host `time.monotonic()` clock. `start_monotonic_s` in `session.json` is the zero point. The cameras are not hardware-synchronised. Each 30 fps output frame carries the newest sample available at that time. **MANUS glove** (`manus.jsonl`). The first line is a header (`"type": "header"`). It defines the ergonomics angle names, the skeleton node tree (`skeleton_nodes`: id, parent, finger chain and joint for each hand) and the array layouts. Each following line has a `stream` (`ergonomics`: 40 joint angles in degrees, `skeleton`: 25 nodes as `[id, px, py, pz, qw, qx, qy, qz]`, `raw`: sensor and IMU poses), a `gloves` list, `t_host_s` relative to `start_monotonic_s`, and `publish_utc_ms` (MANUS Core publish time, 1 ms resolution). Coordinates follow the MANUS VUH convention: X from the viewer, Z up, right-handed, metres. The glove IDs map to left/right in `session.json > manus > glove_sides`. **Calibration.** The board is ChArUco, 7 x 5 squares, `DICT_6X6_250`, with marker = square x 18/25. The board frame has X along the columns, Y opposite to the rows and Z up, in metres. Each camera has `T_board_from_camera` (4x4) and `T_camera_from_board`. Cameras are matched by `serial`. ## Loading with Robohand ``` git clone https://github.com/Ever2after/robohand && cd robohand && setup.cmd set ROBOHAND_DATA= "Depth Replay 3D.cmd" ``` The replay tool overlays the three point clouds in the board frame and draws the glove skeleton next to them. For each session it uses the calibration that was in effect at record time. These sessions have no stored copy, so the tool picks the newest `calibrations/*/calibration.json` created before the session started (the table above).