{
  "id": "single-software-execution--cli--abaqus--task-03--windows",
  "snapshot": "ABAQUS-2025L",
  "instruction": "Perform a tensile analysis of a thin rectangular shell plate with a central circular hole using Abaqus via the Command Line Interface (CLI) or Python scripting environment. To start Abaqus/CAE, run `C:\\SIMULIA\\CAE\\2025LE\\win_b64\\resources\\install\\le\\launcher.bat cae` (adjust path to your install). On this machine, Abaqus command-line jobs should be launched through `C:\\SIMULIA\\Commands\\abaqus.bat`.\n\nUse the N-mm-MPa unit system. Part: Instantiate a 3D Deformable Shell part. Sketch a rectangle on the XY plane with dimensions 120 mm in the X direction and 240 mm in the Y direction. Cut a circular hole at the center point (60, 120) mm with a diameter of 12 mm. Property: Create a material named Steel. Set Young's modulus E = 210000 MPa and Poisson's ratio nu = 0.3. Create a Homogeneous Shell Section with thickness 1 mm and 5 through-thickness integration points. Assign the section to the entire plate geometry. Assembly: Create one dependent instance of the shell plate. Step: Create a Static, General step named Step-HoleTension, placing it after the Initial step. Loads and Boundary Conditions: Apply shell edge loads of 8 N/mm to the two vertical outer edges. On the left edge at X = 0, apply the load in the global negative X direction. On the right edge at X = 120, apply the load in the global positive X direction. To prevent rigid-body motion without over-constraining the tensile deformation: - At the bottom-left corner (0, 0), constrain U1 = U2 = U3 = 0. - At the bottom-right corner (120, 0), constrain U2 = U3 = 0. - At the top-left corner (0, 240), constrain U3 = 0. Mesh: Seed the circular hole edge with an approximate element size of 2.4 mm. Apply a global seed size of 10 mm to the plate. Assign element type S4R and generate the mesh. Job: Create a job named Job-FlangeHole, submit it, and wait for successful completion. Save: Save the model database to C:\\Users\\user\\Desktop\\Job-FlangeHole.cae. Ensure the output database is generated as C:\\Users\\user\\Desktop\\Job-FlangeHole.odb.",
  "source": "https://github.com/nasa/abaverify https://github.com/pantale/abaqusVumat https://github.com/davidmorinNTNU/ABAQUS_subroutines",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": []
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "abaqus"
  ],
  "artifact_paths": [
    "C:\\Users\\user\\Desktop\\Job-FlangeHole.cae",
    "C:\\Users\\user\\Desktop\\Job-FlangeHole.odb"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-03/eval.py",
              "path": "C:\\Users\\user\\Desktop\\eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "C:\\SIMULIA\\Commands\\abaqus.bat cae noGUI=C:\\Users\\user\\Desktop\\eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}