{
  "id": "single-software-execution--cli--abaqus--task-06--windows",
  "snapshot": "ABAQUS-2025L",
  "instruction": "With Abaqus via the Command Line Interface (CLI), perform a steady-state heat conduction analysis: 1. To start Abaqus/CAE, run `C:\\SIMULIA\\CAE\\2025LE\\win_b64\\resources\\install\\le\\launcher.bat cae` (adjust path to your install). On this machine, Abaqus command-line jobs should be launched through `C:\\SIMULIA\\Commands\\abaqus.bat`.\n\nPart module: - Create a 3D Deformable Solid, Extrusion - Sketch a rectangle from (0,0) to (100,50) in the X-Y plane - Extrude along the global Z-axis to thickness 10 mm - This creates a plate with in-plane dimensions 100 mm x 50 mm and thickness 10 mm 2. Property module: - Create material Copper: Conductivity = 400 W/(m·K) - Note: Use SI units (meters). Create the block with dimensions 0.1 m x 0.05 m x 0.01 m, or convert conductivity to 0.0004 W/(mm·K) if using mm. - Solid Homogeneous section 3. Assembly module: Create an instance. 4. Step module: - Create a Heat Transfer, Steady-state step named Step-Thermal 5. Interaction module: None. 6. Load module: - Apply Temperature = 100 degC on the end face at X=0 (the face with normal in -X, dimensions 50 mm x 10 mm) - Apply Temperature = 20 degC on the end face at X=100 mm (the face with normal in +X, dimensions 50 mm x 10 mm) - Keep all other faces adiabatic (no boundary condition applied) 7. Mesh module: - Global seed size: 5 mm - Element type: DC3D8 8. Job module: Create Job-Thermal and submit for solving. 9. Save: - Model: C:\\Users\\user\\Desktop\\Job-Thermal.cae - Results: C:\\Users\\user\\Desktop\\Job-Thermal.odb.",
  "source": "https://github.com/nasa/abaverify https://github.com/pantale/abaqusVumat https://github.com/davidmorinNTNU/ABAQUS_subroutines",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": []
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "abaqus"
  ],
  "artifact_paths": [
    "C:\\Users\\user\\Desktop\\Job-Thermal.cae",
    "C:\\Users\\user\\Desktop\\Job-Thermal.odb"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-06/eval.py",
              "path": "C:\\Users\\user\\Desktop\\eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "C:\\SIMULIA\\Commands\\abaqus.bat cae noGUI=C:\\Users\\user\\Desktop\\eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}