{
  "id": "single-software-execution--cli--abaqus--task-07--windows",
  "snapshot": "ABAQUS-2025L",
  "instruction": "Perform a torsion analysis of a circular shaft (Variant A) using Abaqus via the Command Line Interface (CLI). To start Abaqus/CAE, run `C:\\SIMULIA\\CAE\\2025LE\\win_b64\\resources\\install\\le\\launcher.bat cae` (adjust path to your install). For this workflow, Abaqus command-line jobs should be launched through `C:\\SIMULIA\\Commands\\abaqus.bat`.\n\nUse the N-mm-MPa unit system. Part: Create a 3D Deformable Solid part using Revolution. Sketch in the X-Y plane a rectangle from (0, 0) to (5, 80). The left vertical edge at X = 0 serves as the revolution axis (global Y-axis). Revolve 360 deg to create a solid cylinder with diameter 10 mm and length 80 mm, aligned with the global Y-axis. Property: Create a material named Steel. Set Young's modulus E = 210000 MPa and Poisson's ratio nu = 0.3. Create a Solid Homogeneous section and assign it to the entire shaft. Assembly: Create one dependent instance of the shaft. Step: Create a Static, General step named Step-Torque-A. Load: Apply an Encastre boundary condition to the fixed end face at Y = 0 (perpendicular to the Y-axis). Create a reference point RP-1 at the center of the free end face (Y = 80 mm) and couple it kinematically to that end face. Apply a torque (Moment) of 850 N*mm at RP-1 about the shaft axis (global Y-axis). Mesh: Apply a global seed size of 4 mm. Assign element type C3D8R and generate the mesh. Job: Create a job named Job-Torsion-A, submit it for analysis, and wait for successful completion. Save: Save the model database to C:\\Users\\user\\Desktop\\Job-Torsion-A.cae and ensure the output database is generated as C:\\Users\\user\\Desktop\\Job-Torsion-A.odb.",
  "source": "https://github.com/nasa/abaverify https://github.com/pantale/abaqusVumat https://github.com/davidmorinNTNU/ABAQUS_subroutines",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": []
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "abaqus"
  ],
  "artifact_paths": [
    "C:\\Users\\user\\Desktop\\Job-Torsion-A.cae",
    "C:\\Users\\user\\Desktop\\Job-Torsion-A.odb"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-07/eval.py",
              "path": "C:\\Users\\user\\Desktop\\eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "C:\\SIMULIA\\Commands\\abaqus.bat cae noGUI=C:\\Users\\user\\Desktop\\eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}