{
  "id": "single-software-execution--cli--abaqus--task-16--windows",
  "snapshot": "ABAQUS-2025L",
  "instruction": "Perform a transient heat-transfer analysis of a rectangular solid block (Variant A) using Abaqus via the Command Line Interface (CLI). To start Abaqus/CAE, run `C:\\SIMULIA\\CAE\\2025LE\\win_b64\\resources\\install\\le\\launcher.bat cae` (adjust path to your install). At the start of the task, Abaqus command-line jobs should be launched through `C:\\SIMULIA\\Commands\\abaqus.bat`.\n\nUse the N-mm-MPa unit system with appropriate thermal units. Part: Create a 3D Deformable Solid, Extrusion part. Sketch a rectangle from (0, 0) to (60, 18) and extrude it by 12 mm to create a block of size 60 mm x 18 mm x 12 mm. Property: Create a material named Steel. Set the density to 7.85e-9 tonne/mm^3, the thermal conductivity to 0.045 W/(mm·K), and the specific heat to 4.5e8 mJ/(tonne·K). Create a Homogeneous Solid Section and assign it to the whole block. Assembly: Create one dependent instance of the block. Step: Create a Heat Transfer step named Step-Heat-A. Use transient response. Set the time period to 300 s, the initial increment to 2 s, the maximum increment to 15 s, and the maximum allowable temperature change per increment DELTMX to 10. Initial Condition and Boundary Condition: Apply an initial uniform temperature of 25 degC to the whole block. Apply a temperature boundary condition of 95 degC on the X = 0 face during Step-Heat-A. Mesh: Apply a global seed size of 4 mm. Use DC3D8 heat-transfer brick elements and generate the mesh. Job: Create a job named Job-TransientHeat-A and submit it for solving. Wait for the analysis to complete successfully. Visualization: Review the temperature field at the final time. Record the average temperature near the X = 0 heated face, the average temperature in the X approximately 5 mm band, and the final analysis time. Save: Save the model database to C:\\Users\\user\\Desktop\\Job-TransientHeat-A.cae and ensure the output database is generated as C:\\Users\\user\\Desktop\\Job-TransientHeat-A.odb.",
  "source": "https://github.com/nasa/abaverify https://github.com/pantale/abaqusVumat https://github.com/davidmorinNTNU/ABAQUS_subroutines",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": []
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "abaqus"
  ],
  "artifact_paths": [
    "C:\\Users\\user\\Desktop\\Job-TransientHeat-A.cae",
    "C:\\Users\\user\\Desktop\\Job-TransientHeat-A.odb"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-16/eval.py",
              "path": "C:\\Users\\user\\Desktop\\eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "C:\\SIMULIA\\Commands\\abaqus.bat cae noGUI=C:\\Users\\user\\Desktop\\eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}