{
  "id": "single-software-execution--cli--abaqus--task-17--windows",
  "snapshot": "ABAQUS-2025L",
  "instruction": "Using Abaqus from the command line, analyze thermal bending of a cantilever plate in the N-mm-MPa unit system. Abaqus command-line jobs should be launched through `C:\\SIMULIA\\Commands\\abaqus.bat`. Create a 3D deformable solid plate spanning X = 0 to 100 mm, Y = 0 to 20 mm, and Z = 0 to 4 mm. Partition it at Y = 10 mm so the upper and lower halves are separate cell regions. Define Aluminum with E = 70000 MPa, nu = 0.33, and thermal expansion coefficient 2.3e-5 /K; assign a solid homogeneous section to the whole plate. Create one dependent instance and a Static, General step named Step-ThermalBend. Apply Encastre only to the X = 0 end. Apply an initial temperature of 20 degC to the whole plate. In Step-ThermalBend, set only the upper half, Y = 10 to 20 mm, to 120 degC; the lower half must remain at 20 degC. Create named sets FIXED_END and HOT_HALF. Mesh with C3D8R elements and a 4 mm global seed. Create and run Job-ThermalBend. Review U2 at the free end and the S11 bending-stress distribution. Save C:\\Users\\user\\Desktop\\Job-ThermalBend.cae and C:\\Users\\user\\Desktop\\Job-ThermalBend.odb.",
  "source": "https://github.com/nasa/abaverify https://github.com/pantale/abaqusVumat https://github.com/davidmorinNTNU/ABAQUS_subroutines",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": []
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "abaqus"
  ],
  "artifact_paths": [
    "C:\\Users\\user\\Desktop\\Job-ThermalBend.cae",
    "C:\\Users\\user\\Desktop\\Job-ThermalBend.odb"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-17/eval.py",
              "path": "C:\\Users\\user\\Desktop\\eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "C:\\SIMULIA\\Commands\\abaqus.bat cae noGUI=C:\\Users\\user\\Desktop\\eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}