{
  "id": "single-software-execution--cli--abaqus--task-18--windows",
  "snapshot": "ABAQUS-2025L",
  "instruction": "Perform a modal analysis of a cantilever beam (Variant B) using Abaqus via the Command Line Interface (CLI). To start Abaqus/CAE, run `C:\\SIMULIA\\CAE\\2025LE\\win_b64\\resources\\install\\le\\launcher.bat cae` (adjust path to your install). For this task, Abaqus command-line jobs should be launched through `C:\\SIMULIA\\Commands\\abaqus.bat`.\n\nUse the N-mm-MPa unit system. Part: Create a 3D Deformable Solid part using Extrusion. Sketch a 14 mm x 8 mm rectangle in the Y-Z plane. Extrude along the global X-axis to a length of 360 mm. Property: Create a material named Steel. Set Young's modulus E = 210000 MPa, Poisson's ratio nu = 0.3, and density = 7.95e-9 tonne/mm^3. Create a Solid Homogeneous section and assign it to the entire beam. Assembly: Create one dependent instance of the beam. Step: Create a Linear Perturbation Frequency step named Step-Modal-B. Request 5 eigenvalues. Load: Apply an Encastre boundary condition to the fixed end face at X = 0. Mesh: Apply a global seed size of 10 mm. Assign element type C3D8R and generate the mesh. Job: Create a job named Job-Modal-B, submit it for analysis, and wait for successful completion. Save: Save the model database to C:\\Users\\user\\Desktop\\Job-Modal-B.cae and ensure the output database is generated as C:\\Users\\user\\Desktop\\Job-Modal-B.odb.",
  "source": "https://github.com/nasa/abaverify https://github.com/pantale/abaqusVumat https://github.com/davidmorinNTNU/ABAQUS_subroutines",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": []
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "abaqus"
  ],
  "artifact_paths": [
    "C:\\Users\\user\\Desktop\\Job-Modal-B.cae",
    "C:\\Users\\user\\Desktop\\Job-Modal-B.odb"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-18/eval.py",
              "path": "C:\\Users\\user\\Desktop\\eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "C:\\SIMULIA\\Commands\\abaqus.bat cae noGUI=C:\\Users\\user\\Desktop\\eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}