{
  "id": "single-software-execution--cli--openfoam--task-18--ubuntu",
  "snapshot": "OpenFOAM11",
  "instruction": "Work with OpenFOAM from the command line, then copy `/home/user/Desktop/cavity_base/` to `/home/user/Desktop/cavity_graph/` and solve a fixed two-dimensional lid-driven cavity. Source the installed OpenFOAM environment before running OpenFOAM commands. For this task, before running the case, load OpenFOAM with `source /opt/openfoam11/etc/bashrc`; the solver binaries are under `/opt/openfoam11/bin` and its platform bin directory.\n\nUse a `1 x 1 x 0.01 m` domain with exactly `(64 64 1)` uniform cells, empty front/back faces, no-slip stationary left/right/bottom walls, top-lid velocity `(1 0 0)` m/s, kinematic viscosity `0.01 m^2/s` (`Re=100`), and zero initial velocity. Run laminar `icoFoam` with `deltaT=0.005 s` through `t=30 s`, retain ASCII iteration-30 `U` and `p`, and save successful `blockMesh`, `checkMesh`, and solver outputs as `log.blockMesh`, `log.checkMesh`, and `log.icoFoam`; a failed mesh check is not acceptable. Create `system/sampleDict` using `cellPoint` interpolation and raw output. Sample `U` at exactly 99 uniformly spaced points per line: the vertical line starts at `(0.5,0.01,0.005)` and ends at `(0.5,0.99,0.005)`, while the horizontal line starts at `(0.01,0.5,0.005)` and ends at `(0.99,0.5,0.005)`; both therefore use coordinates 0.01 through 0.99 in increments of 0.01 and include coordinate 0.5. Run the sampling operation and save its output as `log.sample`. Create `/home/user/Desktop/postprocess.py` that parses the raw samples, writes `/home/user/Desktop/vertical_centerline.csv` with columns `y_m,ux_mps,uy_mps`, writes `/home/user/Desktop/horizontal_centerline.csv` with columns `x_m,ux_mps,uy_mps`, defines `ux_center` as vertical-profile `Ux` at `y=0.5`, defines `uy_center` as horizontal-profile `Uy` at `x=0.5`, and writes `/home/user/Desktop/summary.txt` as one CSV line `ux_center, uy_center`. Do not hard-code results and do not use GUI tools.",
  "source": "https://github.com/openfoam/openfoam-dev",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": [
          {
            "local_path": "task-18/init_file/cavity_base.tar",
            "path": "/home/user/Desktop/cavity_base.tar"
          }
        ]
      }
    },
    {
      "type": "launch",
      "parameters": {
        "command": "bash -c \"mkdir -p '/home/user/Desktop/' && tar -xf '/home/user/Desktop/cavity_base.tar' -C '/home/user/Desktop/' && rm -f '/home/user/Desktop/cavity_base.tar'\"",
        "shell": true
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "openfoam"
  ],
  "artifact_paths": [
    "/home/user/Desktop/horizontal_centerline.csv",
    "/home/user/Desktop/postprocess.py",
    "/home/user/Desktop/summary.txt",
    "/home/user/Desktop/vertical_centerline.csv"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-18/eval.py",
              "path": "/home/user/Desktop/eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "python3 /home/user/Desktop/eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}