{
  "id": "single-software-execution--cli--openscad--task-18--ubuntu",
  "snapshot": "OpenSCAD2021.01",
  "instruction": "Begin in OpenSCAD and edit it while preserving the initial right-angle bracket: the base plate occupies x=[-50,50], y=[-30,30], z=[0,5] mm and the upright plate occupies x=[-50,50], y=[25,30], z=[5,40] mm with /home/user/Desktop/task-038_initial.scad. To use OpenSCAD, run `openscad` from a terminal. For this task, run OpenSCAD from `/usr/bin/openscad` when working on `task-038_initial.scad`.\n\nAdd exactly five equally spaced triangular reinforcing ribs with X centers at -40,-20,0,20,40 mm (20 mm center spacing). Each rib is a 3 mm extrusion along X, so its X range is [center_x-1.5,center_x+1.5]. Before union with the bracket, define each rib's right-triangle cross-section in the Y-Z plane by the three vertices (0,4), (28,4), and (28,36) mm. Thus each rib is 28 mm deep in +Y and 32 mm high in +Z. This placement gives a 1 mm overlap with the base plate across z=[4,5] and a 3 mm overlap with the upright plate across y=[25,28]; use union() so the plates and all five ribs form one connected solid. Export /home/user/Desktop/task-038_output.stl.",
  "source": "https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Using_OpenSCAD_in_a_command_line_environment; https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Transformations; https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/CSG_Modelling; https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Export",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": [
          {
            "local_path": "task-18/init_file/task-038_initial.scad",
            "path": "/home/user/Desktop/task-038_initial.scad"
          }
        ]
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "openscad"
  ],
  "artifact_paths": [
    "/home/user/Desktop/task-038_output.stl"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-18/eval.py",
              "path": "/home/user/Desktop/eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "python3 /home/user/Desktop/eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}