{
  "id": "single-software-execution--cli--openscad--task-20--ubuntu",
  "snapshot": "OpenSCAD2021.01",
  "instruction": "Open /home/user/Desktop/task-040_initial.scad using OpenSCAD. To use OpenSCAD, run `openscad` from a terminal. Before starting the work, run OpenSCAD from `/usr/bin/openscad` when working on `task-040_initial.scad`.\n\nComplete the parametric adapter plate in /home/user/Desktop/task-040_initial.scad. The outside shape is a 96 x 72 x 8 mm rounded rectangle plate with corner radius 6 mm. Add a centered through hole of diameter 32 mm. Add one group of four diameter 5 mm holes on a 60 x 40 mm rectangular pitch pattern. Add a second group of four diameter 4 mm holes on a circular pitch diameter 54 mm at angles 45, 135, 225, and 315 degrees. Export /home/user/Desktop/task-040_output.stl.",
  "source": "https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Using_OpenSCAD_in_a_command_line_environment; https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Using_the_2D_Subsystem; https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Transformations; https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/CSG_Modelling; https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Export",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": [
          {
            "local_path": "task-20/init_file/task-040_initial.scad",
            "path": "/home/user/Desktop/task-040_initial.scad"
          }
        ]
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "openscad"
  ],
  "artifact_paths": [
    "/home/user/Desktop/task-040_output.stl"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-20/eval.py",
              "path": "/home/user/Desktop/eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "python3 /home/user/Desktop/eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}