{
  "id": "single-software-execution--cli--solidcam--task-06--windows",
  "snapshot": "SolidCAM-2025",
  "instruction": "Operate the installed SOLIDWORKS CAM 2025 environment through the CAMWorks API using command-line automation only; do not use GUI clicks, GUI automation, generic G-code generators, prebuilt helper wrappers, or manual .nc editing/copying. On this machine, SOLIDWORKS CAM/CAMWorks is hosted by `C:\\Program Files\\SOLIDWORKS Corp\\SOLIDWORKS\\SLDWORKS.exe`; run the native CAM automation through that installation. Load C:\\Users\\User\\Desktop\\job_input.step and read C:\\Users\\User\\Desktop\\tools.csv. Create a native CAM part from the STEP model. Use G54 with the model top-face center at model coordinates [0, 0, 18] mm and tool axis -Z, so the posted model top is Z=0. Create exactly three machining operations using only the listed tools, once each: T1, a 10 mm flat end mill at S7500 rpm and F520 mm/min, for one Pocket operation that clears the central 44 x 28 mm pocket to Z=-11 mm; T2, a 5 mm drill at S5000 rpm and F180 mm/min, for one Drill operation that machines the four through holes centered at (X,Y)=(-35,-20), (-35,20), (35,-20), and (35,20) mm through the 18 mm part, allowing the installed CAM system's bounded drill-tip or breakthrough allowance below Z=-18 mm; and T3, a 6 mm profile end mill at S9000 rpm and F650 mm/min, for one Profile/Contour/Contour Mill operation that cuts the complete 120 x 80 mm outside perimeter to Z=-18 mm with correct cutter-radius compensation. Generate the native operation plan and toolpaths, run native SOLIDWORKS CAM simulation/verification for all three operations with no gouges or undercuts, and post-process with the installed SOLIDWORKS CAM postprocessor. Save the posted NC output exactly as C:\\Users\\User\\Desktop\\task-06.nc.",
  "source": "Installed SOLIDWORKS CAM 2025 / CAMWorks API; official product and operation documentation: https://camworks.com/camworks-2025/ ; https://camworks.com/camworks-is-powering-solidworks-cam/ ; https://help.solidworks.com/2025/English/WhatsNew/c_wn2025_cam_contour_mill_toolpaths.htm",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": [
          {
            "local_path": "task-06/init_file/job_input.step",
            "path": "C:\\Users\\User\\Desktop\\job_input.step"
          },
          {
            "local_path": "task-06/init_file/tools.csv",
            "path": "C:\\Users\\User\\Desktop\\tools.csv"
          }
        ]
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "solidcam"
  ],
  "artifact_paths": [
    "C:\\Users\\User\\Desktop\\task-06.nc"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-06/eval.py",
              "path": "C:\\Users\\User\\Desktop\\eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "python C:\\Users\\User\\Desktop\\eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}