{
  "id": "single-software-execution--cli--solidcam--task-15--windows",
  "snapshot": "SolidCAM-2025",
  "instruction": "Use command-line automation through the installed SOLIDWORKS CAM 2025 environment and CAMWorks API; do not use GUI clicks, generic G-code generators, or manual .nc editing/copying. For this workflow, SOLIDWORKS CAM/CAMWorks is hosted by `C:\\Program Files\\SOLIDWORKS Corp\\SOLIDWORKS\\SLDWORKS.exe`; run the native CAM automation through that installation. Load C:\\Users\\User\\Desktop\\risky_setup.step and read C:\\Users\\User\\Desktop\\tools.csv. Treat the fixture solids contained in the supplied STEP assembly as the complete collision envelope for this task; installed TechDB holder profiles may be used to instantiate tools but must not change the required safe-hole set. Plan spot-drilling and drilling for the sixteen D5 candidate holes with the supplied D3 spot drill and D5 drill while maintaining at least 3 mm radial clearance between the cutting-tool envelope and every fixture during cutting or lateral feed motion. The holes centered at (-45, 24), (15, 24), and (45, 24) mm do not satisfy this clearance and must be skipped; omit those three coordinates from cutting cycles. Spot-drill and drill all remaining thirteen holes, use a clearance plane at least 3 mm above the 28 mm fixture tops for lateral positioning, and post the result through SOLIDWORKS CAM. Save the posted NC output exactly as C:\\Users\\User\\Desktop\\task-15.nc.",
  "source": "https://www.solidworks.com/product/solidworks-cam; https://camworks.com/why-camworks/",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": [
          {
            "local_path": "task-15/init_file/risky_setup.step",
            "path": "C:\\Users\\User\\Desktop\\risky_setup.step"
          },
          {
            "local_path": "task-15/init_file/tools.csv",
            "path": "C:\\Users\\User\\Desktop\\tools.csv"
          }
        ]
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "solidcam"
  ],
  "artifact_paths": [
    "C:\\Users\\User\\Desktop\\task-15.nc"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-15/eval.py",
              "path": "C:\\Users\\User\\Desktop\\eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "python C:\\Users\\User\\Desktop\\eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}