{
  "id": "single-software-execution--cli--solidcam--task-17--windows",
  "snapshot": "SolidCAM-2025",
  "instruction": "Use the installed SOLIDWORKS CAM 2025 environment (powered by CAMWorks) through native API or GUI automation; do not use generic G-code generators or manual .nc editing/copying. SOLIDWORKS CAM/CAMWorks is hosted by `C:\\Program Files\\SOLIDWORKS Corp\\SOLIDWORKS\\SLDWORKS.exe`; run the native CAM automation through that installation. Load C:\\Users\\User\\Desktop\\two_sided_part.step and read C:\\Users\\User\\Desktop\\tools.csv. Create two physically opposite setups. Put each setup's X/Y work zero at the part center and Z work zero on its active surface, with positive Z pointing away from the stock, so cutting depths post as negative Z. In side A's top-face setup, machine the centered 50 x 28 mm open pocket to 11 mm depth using T1 (D10 flat end mill, S7500, F520). In side B's bottom-face setup, machine the four centers (X,Y) = (+/-30,+/-20) mm: use T2 (D5 drill, S5000, F180) for the 8 mm-deep pilot holes and T3 (D8 flat end mill, S8500, F420) for the D11 x 4 mm counterbores. Natively post the two setups separately. The posted NC must preserve the specified tool numbers, spindle speeds, feeds, work offsets, tool-length compensation, depths, pocket/counterbore coverage, and safe approach/retract moves; side A must contain only T1, while side B must contain exactly T2 and T3. Save the A and B outputs exactly as C:\\Users\\User\\Desktop\\task-17_A.nc and C:\\Users\\User\\Desktop\\task-17_B.nc.",
  "source": "https://camworks.com/camworks-is-powering-solidworks-cam/",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": [
          {
            "local_path": "task-17/init_file/two_sided_part.step",
            "path": "C:\\Users\\User\\Desktop\\two_sided_part.step"
          },
          {
            "local_path": "task-17/init_file/tools.csv",
            "path": "C:\\Users\\User\\Desktop\\tools.csv"
          }
        ]
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "solidcam"
  ],
  "artifact_paths": [
    "C:\\Users\\User\\Desktop\\task-17_A.nc",
    "C:\\Users\\User\\Desktop\\task-17_B.nc"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-17/eval.py",
              "path": "C:\\Users\\User\\Desktop\\eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "python C:\\Users\\User\\Desktop\\eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}