{
  "id": "single-software-execution--cli--solidcam--task-18--windows",
  "snapshot": "SolidCAM-2025",
  "instruction": "Use command-line automation with the installed SOLIDWORKS CAM 2025 environment (powered by CAMWorks); do not use GUI clicks, generic G-code generators, or manual .nc editing/copying. For this task, SOLIDWORKS CAM/CAMWorks is hosted by `C:\\Program Files\\SOLIDWORKS Corp\\SOLIDWORKS\\SLDWORKS.exe`; run the native CAM automation through that installation. Load C:\\Users\\User\\Desktop\\basic_milling_part.step and read C:\\Users\\User\\Desktop\\tools.csv. Use one top-side 3-axis milling setup and G54 at the model top-face center [0, 0, 6] mm. In the posted work coordinates, the top face is Z=0 and positive Z points away from the material. Machine the 48 x 24 mm central pocket to Z=-3 with T1 (D8 flat end mill, S7800, F480), drill exactly the two visible holes centered at X=-12/Y=0 and X=12/Y=0 through the 12 mm stock with T2 (D5 drill, S5000, F180), and finish the complete 72 x 48 mm outside Profile/Contour to Z=-12 with T3 last (D6 profile end mill, S8500, F600). Use a conventional three-axis milling post with explicit units, G54, tool length compensation, safe rapid clearance, and program termination. Do not use Mill-Turn, turning, live tooling, C-axis, Y-axis turning, indexed 4/5-axis, or simultaneous 5-axis machining. Save the posted NC output exactly as C:\\Users\\User\\Desktop\\task-18.nc.",
  "source": "https://www.solidworks.com/product/solidworks-cam",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": [
          {
            "local_path": "task-18/init_file/basic_milling_part.step",
            "path": "C:\\Users\\User\\Desktop\\basic_milling_part.step"
          },
          {
            "local_path": "task-18/init_file/tools.csv",
            "path": "C:\\Users\\User\\Desktop\\tools.csv"
          }
        ]
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "solidcam"
  ],
  "artifact_paths": [
    "C:\\Users\\User\\Desktop\\task-18.nc"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-18/eval.py",
              "path": "C:\\Users\\User\\Desktop\\eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "python C:\\Users\\User\\Desktop\\eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}