{
  "id": "single-software-execution--gui--solidworks--task-13--windows",
  "snapshot": "SolidWorks-2025",
  "instruction": "Inspect gui_013_clamp_jaw.step in SolidWorks, an 80 x 30 x 25 mm clamp jaw block spanning X=-40 to X=40, Y=-15 to Y=15, and Z=0 to Z=25. Open SOLIDWORKS 2025 from its desktop shortcut, then load `gui_013_clamp_jaw.step`. On the clamping face at Y=-15, cut a V groove that runs the full length along X, has included angle 90 degrees, and depth 8 mm into the part with the apex at Y=-7 and Z=12.5. Add two M6 mounting through holes from the top along Z, using geometric diameter 6.5 mm, centered at X=+/-25 and Y=0. Add 1 mm fillets to all outside edges. Export C:\\Users\\User\\Desktop\\gui_013_clamp_vjaw_out.step.",
  "source": "https://help.solidworks.com/2025/English/SolidWorks/sldworks/HIDD_EXPORT_OPTIONS_STEP.htm\nhttps://help.solidworks.com/2025/English/SolidWorks/sldworks/c_Hole_Wizard_Overview.htm\nhttps://help.solidworks.com/2025/English/SolidWorks/sldworks/c_Fillets.htm",
  "config": [
    {
      "type": "upload_file",
      "parameters": {
        "files": [
          {
            "local_path": "task-13/init_file/gui_013_clamp_jaw.step",
            "path": "C:\\Users\\User\\Desktop\\gui_013_clamp_jaw.step"
          }
        ]
      }
    },
    {
      "type": "launch",
      "parameters": {
        "command": [
          "C:\\Program Files\\SOLIDWORKS Corp\\SOLIDWORKS\\SLDWORKS.exe",
          "C:\\Users\\User\\Desktop\\gui_013_clamp_jaw.step"
        ]
      }
    },
    {
      "type": "execute",
      "parameters": {
        "command": [
          "python",
          "-c",
          "import pyautogui, time; time.sleep(20); pyautogui.press('enter'); time.sleep(1); pyautogui.press('enter'); time.sleep(5)"
        ]
      }
    }
  ],
  "trajectory": "trajectories/",
  "related_apps": [
    "solidworks"
  ],
  "artifact_paths": [
    "C:\\Users\\User\\Desktop\\gui_013_clamp_vjaw_out.step"
  ],
  "evaluator": {
    "postconfig": [
      {
        "type": "upload_file",
        "parameters": {
          "files": [
            {
              "local_path": "task-13/eval.py",
              "path": "C:\\Users\\User\\Desktop\\eval.py"
            }
          ]
        }
      }
    ],
    "func": "exact_match",
    "result": {
      "type": "vm_command_line",
      "command": "python C:\\Users\\User\\Desktop\\eval.py",
      "shell": "true"
    },
    "expected": {
      "type": "rule",
      "rules": {
        "expected": "True\n"
      }
    }
  },
  "proxy": false,
  "fixed_ip": false,
  "possibility_of_env_change": "low"
}