--- license: cc-by-4.0 pretty_name: "Cable sorting sample (bimanual xArm7, Meta Quest teleoperation)" task_categories: - robotics tags: - LeRobot - robotics - teleoperation - bimanual - manipulation - xarm size_categories: - 10K`. - **`paddy.action_valid`** (one flag per arm, `[left, right]`) is true on rows where that arm had a live teleoperation command: a fresh target from the headset, the arm enabled, no rejected targets. It is not a measure of tracking quality. The arms take turns in this task (pick with the left arm, hand over, place with the right), so each arm is commanded on 14 to 81 % of an episode's rows. Mask or weight the idle arm's rows if your method needs it. - **Subtasks.** The operator marked three subtasks live with a foot pedal: - `0`: Pick up a cable with the left arm and use the right arm for a better camera view - `1`: Pass the cable from the left arm to the right arm - `2`: Place the green cables into the left bin and the black cables into the right bin `paddy.subtask_index` gives the open subtask per row and -1 outside the marks (3.4 % of rows, all of them before the first or after the last mark of an episode). Each episode's spans and per-subtask outcomes are in its sidecar, `meta/paddy/episodes/.json`, under `conversion.subtasks`. The marks of 5 episodes were corrected in review after recording: in episodes 3, 14 and 18, which failed, the step that failed was labelled `failure` from the operator's note and the video, and in episodes 21 and 23 the first pedal press had been lost, so every mark was moved one step later and the first subtask starts with the trial. - **Failures.** 3 of 25 episodes (12 %, 10.5 % of the rows) are failures, labelled `failure` in `paddy/outcome` (`meta/episodes`). The subtask that failed is labelled `failure` and no later subtask is marked: - episode 3 (31 s): failed at subtask 0 (pick); operator's note: "Left arm couldnt reach cable" - episode 14 (40 s): failed at subtask 1 (handover); operator's note: "dropped cable" - episode 18 (27 s): failed at subtask 2 (place); operator's note: "black cable was placed partially sitting out the front of the bin" Filter on `paddy/outcome` if you train on successes only. The episodes are every attempt at the task the operator kept in these sessions; none was removed for quality. - **Scenes.** Two bin layouts, named per episode in `paddy/scene_id`: `Paddy_Office` (episodes 0-13); `Paddy_Office_binwall_2_lowlight` (episodes 14-24). In the first the bins hang lower on the bin wall; in the second they hang higher and the room light is reduced (label `low_light` in `paddy/labels`). - **Timing.** All streams share one clock, the recording computer's, stored per row as UTC epoch seconds in `paddy.utc_s`. Joint states arrive at 100 Hz and force/torque readings at about 100 Hz; force/torque is fresh on 99.94 % of rows (`paddy.force_torque_valid`). The cameras' frames of a row are a median 5.5 to 14.7 ms apart per episode (the two cameras furthest apart; 9.5 ms over the episodes). Each arm follows its command about 115 ms later (102 to 150 ms per episode and arm), so the state lags the action by about 3 rows. Where a camera missed a frame the previous one is repeated; `paddy.frame_age.` gives the age of each camera's frame at the row (at most 78 ms in this dataset). - **Episode boundaries.** An episode covers the time in which every included stream has data: it starts when the last stream has started and ends when the first one stops. No row inside an episode is dropped and no episode was paused. `meta/paddy/keep_ranges.json` lists per episode the row ranges in which an arm moves (`paddy.moving`), if you want to drop idle rows at the ends. - **Ratings and ids.** `paddy/rating` is the operator's 1 to 5 judgement given at the stop, 0 where none was given (14 of 25 episodes rated). `paddy/episode_uuid` identifies each recording and is the same in both releases. ## Cameras and calibration | Camera | Model | Role | Resolution | Intrinsics | Extrinsics (ChArUco board) | |---|---|---|---|---|---| | `camera_top` | Intel RealSense D435 | overhead, primary | recorded at 1920x1080, scaled to 1280x720 | factory K, distortion fitted with a ChArUco board | 2026-11-12, 31 views, reprojection RMS 0.55 px, 0.43 mm | | `camera_left` | Intel RealSense D405 | wrist | 1280x720 | factory K and distortion | 2026-11-12, 17 views, reprojection RMS 1.01 px, 0.85 mm | | `camera_right` | Intel RealSense D405 | wrist | 1280x720 | factory K and distortion | 2026-11-12, 16 views, reprojection RMS 0.88 px, 0.73 mm | - Intrinsics (`K`, `D`, plumb_bob) in `meta/cameras.json` describe the stored video, which is not undistorted. The top camera's intrinsics are scaled with its pictures (`resized_from`). - Extrinsics: `meta/cameras.json` gives each camera's color optical frame in each arm's base frame (`extrinsics..base_T_cam`, metres). The wrist cameras' pose at every row is in `paddy.camera_pose.`, from the joints through the URDF and the measured mount. The calibration records note that `camera_left` and `camera_right` missed the calibration tool's reprojection target (0.5 px). - Robot description: `meta/paddy/robot_description.urdf` holds both arms, grippers, the force/torque sensor and the cameras in one tree, with the joint origins fitted to camera views of a ChArUco board. Mesh files are not included; kinematics and inertials are complete without them. ## The lossless version [`PaddyDataCollection/cable_sorting_sample_full`](https://huggingface.co/datasets/PaddyDataCollection/cable_sorting_sample_full) holds episodes 10, 13, 14 and 17 of this dataset with every stream as recorded, all lossless: the scene camera `camera_bottom` (Intel RealSense D405, 1280x720), the overhead camera at its recorded 1920x1080, its infrared stereo pair and 16-bit depth from all four cameras, aligned and raw (19.38 GB, about 8.4 GB per minute of recording). Episode 14 starts 79 rows (2.6 s) later there, because `camera_bottom` started last. The other 3 have the same rows in both versions (every shared column equal but the dataset-wide `index` and `episode_index`). The recording logs and the per-episode rig snapshot in this dataset name the fourth camera and the depth streams because they were recorded for every episode. ## Files - `data/`, `videos/`, `meta/info.json`, `meta/stats.json`, `meta/tasks.parquet`, `meta/episodes/`: LeRobot v3.0. - `meta/cameras.json`: intrinsics, extrinsics, calibration records, camera roles. - `meta/paddy/info.json`: conventions for every column (units, frames, timing, masks), rates. - `meta/paddy/episodes/.json`: one sidecar per episode with the recorder's metadata (labels, notes, subtasks, a snapshot of the rig configuration) and the conversion report (rates, stream gaps, timing). In these files, hardware serial numbers, network addresses and interface names are replaced with ``, home folders with `/home/user`, and the operator's name with `operator_01`; `rig_hash` is the hash of the configuration as recorded. - `meta/paddy/logs///`: the recorder's logs and each raw recording's `metadata.yaml`. - `meta/paddy/keep_ranges.json`, `meta/paddy/robot_description.urdf`. - `manifest.json` (episodes, summary, every file with its size and sha256) and `SHA256SUMS`: check a copy with `sha256sum -c SHA256SUMS` in its root. ## People in view - **Declared:** others (other people may appear in the cameras' view) Faces are not blurred. ## License and attribution Creative Commons Attribution 4.0 International (CC BY 4.0): https://creativecommons.org/licenses/by/4.0/. You may share and adapt the data, also commercially, if you give appropriate credit. Attribution: Paddy Data, https://huggingface.co/datasets/PaddyDataCollection/cable_sorting_sample. ## Contact Paddy Data: https://paddydata.ai
meta/info.json ```json { "codebase_version": "v3.0", "robot_type": "dual_xarm7", "total_episodes": 25, "total_frames": 27953, "total_tasks": 1, "chunks_size": 1000, "data_files_size_in_mb": 100, "video_files_size_in_mb": 200, "fps": 30, "splits": { "train": "0:25" }, "data_path": "data/chunk-{chunk_index:03d}/file-{file_index:03d}.parquet", "video_path": "videos/{video_key}/chunk-{chunk_index:03d}/file-{file_index:03d}.mp4", "features": { "observation.state": { "dtype": "float32", "shape": [ 16 ], "names": [ "left_joint1", "left_joint2", "left_joint3", "left_joint4", "left_joint5", "left_joint6", "left_joint7", "left_gripper", "right_joint1", "right_joint2", "right_joint3", "right_joint4", "right_joint5", "right_joint6", "right_joint7", "right_gripper" ], "info": { "unit": "rad; gripper 0 closed .. 1 open", "order": "per arm joint1..jointN (URDF order, base to wrist), then the gripper", "conventions": "meta/paddy/info.json conventions.observation_state" } }, "observation.velocity": { "dtype": "float32", "shape": [ 14 ], "names": [ "left_joint1", "left_joint2", "left_joint3", "left_joint4", "left_joint5", "left_joint6", "left_joint7", "right_joint1", "right_joint2", "right_joint3", "right_joint4", "right_joint5", "right_joint6", "right_joint7" ], "info": { "unit": "rad/s", "source": "sdk", "meaning": "joint velocities the xArm SDK reports (get_joint_states), as the follower published them with each joint-state sample (100 Hz), zero-order held like observation.state", "conventions": "meta/paddy/info.json conventions.velocity", "order": "per arm joint1..jointN (URDF order, base to wrist), as observation.state; no gripper" } }, "observation.effort": { "dtype": "float32", "shape": [ 14 ], "names": [ "left_joint1", "left_joint2", "left_joint3", "left_joint4", "left_joint5", "left_joint6", "left_joint7", "right_joint1", "right_joint2", "right_joint3", "right_joint4", "right_joint5", "right_joint6", "right_joint7" ], "info": { "unit": "N m", "source": "sdk_estimate", "validated": false, "meaning": "the xArm SDK's joint torque estimate (get_joint_states) from motor current and the arm's own dynamic model; the arms have no joint torque sensors. Sign and magnitude not yet checked on the rig", "conventions": "meta/paddy/info.json conventions.effort", "order": "per arm joint1..jointN (URDF order, base to wrist), as observation.state; no gripper" } }, "observation.eef_pose.left": { "dtype": "float32", "shape": [ 7 ], "names": [ "x", "y", "z", "qx", "qy", "qz", "qw" ], "info": { "unit": "m", "rotation": "quaternion xyzw", "frame": "Left_link_base" } }, "observation.eef_rot6d.left": { "dtype": "float32", "shape": [ 6 ], "names": [ "r00", "r10", "r20", "r01", "r11", "r21" ], "info": { "unit": "1", "rotation": "6D: the first two columns of the rotation matrix, column-major [r00, r10, r20, r01, r11, r21] (Zhou et al. 2019); zeros where the quaternion is zero", "conventions": "meta/paddy/info.json conventions.rot6d", "of": "observation.eef_pose.left", "frame": "Left_link_base" } }, "observation.eef_pose.right": { "dtype": "float32", "shape": [ 7 ], "names": [ "x", "y", "z", "qx", "qy", "qz", "qw" ], "info": { "unit": "m", "rotation": "quaternion xyzw", "frame": "Right_link_base" } }, "observation.eef_rot6d.right": { "dtype": "float32", "shape": [ 6 ], "names": [ "r00", "r10", "r20", "r01", "r11", "r21" ], "info": { "unit": "1", "rotation": "6D: the first two columns of the rotation matrix, column-major [r00, r10, r20, r01, r11, r21] (Zhou et al. 2019); zeros where the quaternion is zero", "conventions": "meta/paddy/info.json conventions.rot6d", "of": "observation.eef_pose.right", "frame": "Right_link_base" } }, "observation.eef_state": { "dtype": "float32", "shape": [ 16 ], "names": [ "left_x", "left_y", "left_z", "left_qx", "left_qy", "left_qz", "left_qw", "left_gripper", "right_x", "right_y", "right_z", "right_qx", "right_qy", "right_qz", "right_qw", "right_gripper" ], "info": { "unit": "m; gripper 0 closed .. 1 open", "rotation": "quaternion xyzw, sign-continuous per episode", "frame": { "left": "Left_link_base", "right": "Right_link_base" }, "layout_per_arm": [ "x", "y", "z", "qx", "qy", "qz", "qw", "gripper" ], "meaning": "observation.eef_pose. and observation.state's gripper of every arm in one vector: the measured TCP pose and gripper opening in a tcp action's layout, the state of an end-effector policy; gripper 0 for an arm without one", "conventions": "meta/paddy/info.json conventions.eef_state" } }, "action": { "dtype": "float32", "shape": [ 16 ], "names": [ "left_joint1", "left_joint2", "left_joint3", "left_joint4", "left_joint5", "left_joint6", "left_joint7", "left_gripper_cmd", "right_joint1", "right_joint2", "right_joint3", "right_joint4", "right_joint5", "right_joint6", "right_joint7", "right_gripper_cmd" ], "info": { "unit": "rad; gripper 0 closed .. 1 open", "space": "joints", "order": "per arm joint1..jointN (URDF order, base to wrist, as in observation.state), then the gripper command", "joints": "absolute joint positions (not a delta)", "timing": "row k holds the last joint command stamped at or before t_k (zero-order hold), the measured joints before the first one; without a recorded joint command, the next row's measured joints (meta/paddy/info.json conventions.action.joints_source)", "conventions": "meta/paddy/info.json conventions.action" } }, "paddy.action_valid": { "dtype": "bool", "shape": [ 2 ], "names": [ "left", "right" ] }, "paddy.action_issued": { "dtype": "bool", "shape": [ 2 ], "names": [ "left", "right" ] }, "paddy.command_sent.left": { "dtype": "float32", "shape": [ 7 ], "names": [ "x", "y", "z", "qx", "qy", "qz", "qw" ], "info": { "unit": "m", "rotation": "quaternion xyzw", "frame": "Left_link_base" } }, "paddy.command_sent.right": { "dtype": "float32", "shape": [ 7 ], "names": [ "x", "y", "z", "qx", "qy", "qz", "qw" ], "info": { "unit": "m", "rotation": "quaternion xyzw", "frame": "Right_link_base" } }, "observation.force_torque.right": { "dtype": "float32", "shape": [ 6 ], "names": [ "fx", "fy", "fz", "tx", "ty", "tz" ], "info": { "unit": "N (fx fy fz), N m (tx ty tz)", "frame": "Right_link_eef", "timing": "row k holds the last reading stamped at or before t_k (zero-order hold); zeros where paddy.force_torque_valid is false", "conventions": "meta/paddy/info.json conventions.force_torque", "reading": "after the control box's load and offset compensation" } }, "paddy.force_torque_raw.right": { "dtype": "float32", "shape": [ 6 ], "names": [ "fx", "fy", "fz", "tx", "ty", "tz" ], "info": { "unit": "N (fx fy fz), N m (tx ty tz)", "frame": "Right_link_eef", "timing": "row k holds the last reading stamped at or before t_k (zero-order hold); zeros where paddy.force_torque_valid is false", "conventions": "meta/paddy/info.json conventions.force_torque", "reading": "unprocessed sensor reading, no compensation" } }, "paddy.force_torque_valid": { "dtype": "bool", "shape": [ 1 ], "names": [ "right" ] }, "paddy.target_pose.left": { "dtype": "float32", "shape": [ 7 ], "names": [ "x", "y", "z", "qx", "qy", "qz", "qw" ], "info": { "unit": "m", "rotation": "quaternion xyzw, sign-continuous per episode", "frame": "Left_link_base", "pose": "absolute TCP target in the arm base frame (not a delta)", "timing": "row k holds the last target stamped at or before t_k (zero-order hold)" } }, "paddy.target_pose.right": { "dtype": "float32", "shape": [ 7 ], "names": [ "x", "y", "z", "qx", "qy", "qz", "qw" ], "info": { "unit": "m", "rotation": "quaternion xyzw, sign-continuous per episode", "frame": "Right_link_base", "pose": "absolute TCP target in the arm base frame (not a delta)", "timing": "row k holds the last target stamped at or before t_k (zero-order hold)" } }, "paddy.engaged": { "dtype": "bool", "shape": [ 2 ], "names": [ "left", "right" ] }, "paddy.scaling": { "dtype": "float32", "shape": [ 2 ], "names": [ "left", "right" ] }, "paddy.moving": { "dtype": "bool", "shape": [ 2 ], "names": [ "left", "right" ], "info": { "meaning": "the arm moves at the row: TCP, an arm joint or the gripper over a window centred on the row", "rule": "meta/paddy/info.json motion" } }, "paddy.control_source": { "dtype": "int8", "shape": [ 2 ], "names": [ "left", "right" ], "info": { "meaning": "who drove the arm at the row", "values": { "0": "nobody", "1": "human", "2": "policy" } } }, "paddy.target_rot6d.left": { "dtype": "float32", "shape": [ 6 ], "names": [ "r00", "r10", "r20", "r01", "r11", "r21" ], "info": { "unit": "1", "rotation": "6D: the first two columns of the rotation matrix, column-major [r00, r10, r20, r01, r11, r21] (Zhou et al. 2019); zeros where the quaternion is zero", "conventions": "meta/paddy/info.json conventions.rot6d", "of": "paddy.target_pose.left", "frame": "Left_link_base", "not_a_policy_output": true } }, "paddy.target_rot6d.right": { "dtype": "float32", "shape": [ 6 ], "names": [ "r00", "r10", "r20", "r01", "r11", "r21" ], "info": { "unit": "1", "rotation": "6D: the first two columns of the rotation matrix, column-major [r00, r10, r20, r01, r11, r21] (Zhou et al. 2019); zeros where the quaternion is zero", "conventions": "meta/paddy/info.json conventions.rot6d", "of": "paddy.target_pose.right", "frame": "Right_link_base", "not_a_policy_output": true } }, "paddy.subtask_index": { "dtype": "int64", "shape": [ 1 ], "names": null, "info": { "meaning": "index of the operator-marked subtask open at the row, -1 = none", "names": "meta/paddy/episodes/.json conversion.subtasks" } }, "timestamp": { "dtype": "float32", "shape": [ 1 ], "names": null }, "paddy.utc_s": { "dtype": "float64", "shape": [ 1 ], "names": null, "info": { "unit": "s", "clock": "UTC epoch seconds, ROS header.stamp of the recorder host" } }, "frame_index": { "dtype": "int64", "shape": [ 1 ], "names": null }, "episode_index": { "dtype": "int64", "shape": [ 1 ], "names": null }, "index": { "dtype": "int64", "shape": [ 1 ], "names": null }, "task_index": { "dtype": "int64", "shape": [ 1 ], "names": null }, "observation.images.camera_top": { "dtype": "video", "shape": [ 3, 720, 1280 ], "names": [ "channel", "height", "width" ], "info": { "video.height": 720, "video.width": 1280, "video.codec": "h264", "video.pix_fmt": "yuv420p", "video.fps": 30, "video.channels": 3, "video.g": 10, "video.crf": 18, "video.preset": "medium", "video.is_depth_map": false, "has_audio": false } }, "observation.images.camera_left": { "dtype": "video", "shape": [ 3, 720, 1280 ], "names": [ "channel", "height", "width" ], "info": { "video.height": 720, "video.width": 1280, "video.codec": "h264", "video.pix_fmt": "yuv420p", "video.fps": 30, "video.channels": 3, "video.g": 10, "video.crf": 18, "video.preset": "medium", "video.is_depth_map": false, "has_audio": false } }, "observation.images.camera_right": { "dtype": "video", "shape": [ 3, 720, 1280 ], "names": [ "channel", "height", "width" ], "info": { "video.height": 720, "video.width": 1280, "video.codec": "h264", "video.pix_fmt": "yuv420p", "video.fps": 30, "video.channels": 3, "video.g": 10, "video.crf": 18, "video.preset": "medium", "video.is_depth_map": false, "has_audio": false } }, "paddy.frame_age.camera_top": { "dtype": "float32", "shape": [ 1 ], "names": null, "info": { "unit": "s" } }, "paddy.frame_age.camera_left": { "dtype": "float32", "shape": [ 1 ], "names": null, "info": { "unit": "s" } }, "paddy.frame_age.camera_right": { "dtype": "float32", "shape": [ 1 ], "names": null, "info": { "unit": "s" } }, "paddy.camera_pose.camera_left": { "dtype": "float32", "shape": [ 7 ], "names": [ "x", "y", "z", "qx", "qy", "qz", "qw" ], "info": { "unit": "m", "frame": "Left_link_base", "camera_frame": "Left_camera_color_optical_frame", "time": "row" } }, "paddy.camera_pose.camera_right": { "dtype": "float32", "shape": [ 7 ], "names": [ "x", "y", "z", "qx", "qy", "qz", "qw" ], "info": { "unit": "m", "frame": "Right_link_base", "camera_frame": "Right_camera_color_optical_frame", "time": "row" } } } } ```