Tilt-out bin unit, 4 bins, 600 mm wide TB604 The bins are clear, transparent acrylic (modelled as a blended transparent material) in a grey housing, and each bin is wedge-shaped so it can swing open inside its cell; an open variant is published as TB604O. A tilt-out bin unit (Hebrew: רב-תא, "multi-cell") with 4 bins side by side: a fixed open-front housing in which each bin pivots forward on its bottom edge, so small parts can be seen and reached without removing anything. This is the 4-bin member of a range that shares one 600 mm (23 5/8 in) width, so units of different bin counts stack into a single wall; only height and depth change. The same moulding is sold in the US as Akro-Mils TiltView 06704, with identical inch figures, so there is no separate US model. Dimensions are confirmed from the manufacturer's carton and cross-checked against madafim.co.il, within about 2 mm. All 4 bins are modelled closed. DIMENSIONS (external) Depth 168 mm Width 600 mm Height 207 mm STANDARD No formal standard. Metric and US ranges share one 600 mm (23 5/8 in) width with 2/3/4/5/6/9-bin units, so units of different bin counts stack into one wall. Matches Akro-Mils TiltView 0670N. TYPICAL USE Built as a set-dressing and layout asset for workshops, stockrooms, maintenance stores and electronics or hardware storage scenes: wall-mounted and shelf-top bin walls, small-parts and fastener storage, WMS and inventory-system visualisation, facility and architectural walkthroughs, training and simulation environments, and product configurators. Modelled at true real-world scale with clean low-poly topology and a single flat base colour, so it instances cheaply across a wall of several units and can be recoloured without touching the mesh. ASSET NOTES Format GLB (glTF 2.0 binary), single file, no external textures Scale metres, real world - a 600 mm crate is 0.600 units long Origin centre of the base, +Z up Geometry 1,472 triangles, 2,228 vertices Materials flat PBR base colours, no image maps File size 62.8 KB LICENCE CC Attribution 4.0 (CC BY 4.0) TAGS tilt bin, tilt-out bin, tip-out bin, multi-cell, 4 bin, parts bin, small parts storage, shelf bin, TiltView, storage bin, workshop, stockroom, industrial, plastic bin, inventory, lowpoly, pbr, gltf, glb