{"intent": "add DHCPv4 scope named Scope-Net-12", "vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Add-DhcpServerv4Scope -Name \"Scope-Net-12\" -StartRange 192.168.12.100 -EndRange 192.168.12.200 -SubnetMask 255.255.255.0", "source": "corpus", "command_original": "Add-DhcpServerv4Scope -Name \"Scope-Net-12\" -StartRange 192.168.12.100 -EndRange 192.168.12.200 -SubnetMask 255.255.255.0"}
{"intent": "add static route 172.16.25.0/24 via 10.255.1.25", "vendor": "Aruba", "os": "aoscx", "category": "Routing", "command": "ip route 172.16.25.0/24 10.255.1.25", "source": "corpus", "command_original": "ip route 172.16.25.0/24 10.255.1.25"}
{"intent": "set security rule Policy_Entry_43 threat profile group", "vendor": "PAN-OS", "os": "panos", "category": "Firewall", "command": "set rulebase security rules Policy_Entry_43 profile-setting group Threat-Profiles-Group", "source": "corpus", "command_original": "set rulebase security rules Policy_Entry_43 profile-setting group Threat-Profiles-Group"}
{"intent": "show IGMP interface details", "vendor": "FRR", "os": "frr", "category": "System", "command": "show ip igmp [vrf NAME] interface [detail|WORD] [json]", "source": "corpus", "command_original": "show ip igmp [vrf NAME] interface [detail|WORD] [json]"}
{"intent": "drop SSH from 192.168.58.0/24 with nftables", "vendor": "Linux", "os": "linux", "category": "Security", "command": "nft add rule ip filter input ip saddr 192.168.58.0/24 tcp dport 22 drop", "source": "corpus", "command_original": "nft add rule ip filter input ip saddr 192.168.58.0/24 tcp dport 22 drop"}
{"intent": "add static ARP entry 192.168.4.10", "vendor": "Linux", "os": "linux", "category": "Protocols", "command": "arp -s 192.168.4.10 00:11:22:33:44:04", "source": "corpus", "command_original": "arp -s 192.168.4.10 00:11:22:33:44:04"}
{"intent": "add IP address 192.168.14.1/24 on vlan-140", "vendor": "Mikrotik", "os": "routeros", "category": "VLAN", "command": "/ip address add address=192.168.14.1/24 interface=vlan-140 network=192.168.14.0", "source": "corpus", "command_original": "/ip address add address=192.168.14.1/24 interface=vlan-140 network=192.168.14.0"}
{"intent": "add static route 172.16.100.0/24 via 10.255.1.100", "vendor": "Huawei", "os": "vrp", "category": "Routing", "command": "ip route-static 172.16.100.0 255.255.255.0 10.255.1.100", "source": "corpus", "command_original": "ip route-static 172.16.100.0 255.255.255.0 10.255.1.100"}
{"intent": "enable auto-on on port 7:16", "vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure ports 7:16 auto-on", "source": "corpus", "command_original": "configure ports 7:16 auto-on"}
{"intent": "set OSPF passive interface swp31 in default VRF", "vendor": "NVIDIA", "os": "nvue", "category": "OSPF", "command": "nv set vrfs default router ospf area 0.0.0.0 passive-interface swp31", "source": "corpus", "command_original": "nv set vrfs default router ospf area 0.0.0.0 passive-interface swp31"}
{"intent": "remove route to 10.0.2.0/24", "vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Remove-NetRoute -DestinationPrefix 10.0.2.0/24 -Confirm:$false", "source": "corpus", "command_original": "Remove-NetRoute -DestinationPrefix 10.0.2.0/24 -Confirm:$false"}
{"intent": "show BGP EVPN routes by type", "vendor": "FRR", "os": "frr", "category": "EVPN", "command": "show bgp l2vpn evpn route [type <macip|2|multicast|3|es|4|prefix|5>]", "source": "corpus", "command_original": "show bgp l2vpn evpn route [type <macip|2|multicast|3|es|4|prefix|5>]"}
{"intent": "configure EVPN flood traffic filtering", "vendor": "Arista", "os": "eos", "category": "EVPN", "command": "Flood Traffic Filtering with EVPN", "source": "corpus", "command_original": "Flood Traffic Filtering with EVPN"}
{"intent": "show port 6:16 detailed information", "vendor": "Extreme", "os": "exos", "category": "Troubleshooting", "command": "show ports 6:16 info detail", "source": "corpus", "command_original": "show ports 6:16 info detail"}
{"intent": "reject matching subnets in firewall filter", "vendor": "Juniper", "os": "junos", "category": "Routing", "command": "set term ACCEPT_SOME-SUBNETS then reject", "source": "corpus", "command_original": "set term ACCEPT_SOME-SUBNETS then reject"}
{"intent": "create VLAN 104", "vendor": "Huawei", "os": "vrp", "category": "Interfaces", "command": "vlan 104", "source": "corpus", "command_original": "[Huawei] vlan 104"}
{"intent": "show FDB entries for vlan 230", "vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "show fdb vlan Vlan-ID-230", "source": "corpus", "command_original": "show fdb vlan Vlan-ID-230"}
{"intent": "capture ICMP on en1 to pcapng file", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i en1 -f \"icmp\" -w /tmp/capture_en1_icmp.pcapng", "source": "corpus", "command_original": "tshark -i en1 -f \"icmp\" -w /tmp/capture_en1_icmp.pcapng"}
{"intent": "set VLAN 870 IP address 192.168.87.1/24", "vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface vlan870 ip address 192.168.87.1/24", "source": "corpus", "command_original": "nv set interface vlan870 ip address 192.168.87.1/24"}
{"intent": "update Cisco IPS signatures", "vendor": "Cisco", "os": "ios", "category": "Security", "command": "ips signature update cisco", "source": "corpus", "command_original": "ips signature update cisco"}
{"intent": "set port 6:19 description", "vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure ports 6:19 description \"Stack-Member-Slot-6-Port-19\"", "source": "corpus", "command_original": "configure ports 6:19 description \"Stack-Member-Slot-6-Port-19\""}
{"intent": "add IPv6 address 2001:db8:41::1/64 on ether41", "vendor": "Mikrotik", "os": "routeros", "category": "Interfaces", "command": "/ipv6 address add address=2001:db8:41::1/64 interface=ether41 advertise=yes", "source": "corpus", "command_original": "/ipv6 address add address=2001:db8:41::1/64 interface=ether41 advertise=yes"}
{"intent": "show global switch hash configuration", "vendor": "SONiC", "os": "sonic", "category": "Troubleshooting", "command": "show switch-hash global", "source": "corpus", "command_original": "show switch-hash global"}
{"intent": "add dhcp server on vlan-960 using pool dhcp-pool-96", "vendor": "Mikrotik", "os": "routeros", "category": "VLAN", "command": "/ip dhcp-server add name=dhcp-srv-96 interface=vlan-960 address-pool=dhcp-pool-96 disabled=no", "source": "corpus", "command_original": "/ip dhcp-server add name=dhcp-srv-96 interface=vlan-960 address-pool=dhcp-pool-96 disabled=no"}
{"intent": "scan port 136 with SYN scan on 192.168.56.0/24", "vendor": "Linux", "os": "linux", "category": "Security", "command": "nmap -p 136 -sS -n 192.168.56.0/24", "source": "corpus", "command_original": "nmap -p 136 -sS -n 192.168.56.0/24"}
{"intent": "delete ip address 192.168.75.10/24 from eth3", "vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "ip addr del 192.168.75.10/24 dev eth3", "source": "corpus", "command_original": "ip addr del 192.168.75.10/24 dev eth3"}
{"intent": "add ip address 10.5.1.1/24 on ether5", "vendor": "Mikrotik", "os": "routeros", "category": "Interfaces", "command": "/ip address add address=10.5.1.1/24 interface=ether5 network=10.5.1.0", "source": "corpus", "command_original": "/ip address add address=10.5.1.1/24 interface=ether5 network=10.5.1.0"}
{"intent": "log to stdout at specified level", "vendor": "FRR", "os": "frr", "category": "System", "command": "log stdout LEVEL", "source": "corpus", "command_original": "log stdout LEVEL"}
{"intent": "configure eth2 with 192.168.18.10/24 and bring up", "vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "ifconfig eth2 192.168.18.10 netmask 255.255.255.0 up", "source": "corpus", "command_original": "ifconfig eth2 192.168.18.10 netmask 255.255.255.0 up"}
{"intent": "capture port 179 traffic on eth1 to pcapng", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i eth1 -f \"port 179\" -w /tmp/capture_eth1_port_179.pcapng", "source": "corpus", "command_original": "tshark -i eth1 -f \"port 179\" -w /tmp/capture_eth1_port_179.pcapng"}
{"intent": "set vpp xconnect interface", "vendor": "VyOS", "os": "vyos", "category": "Interfaces", "command": "set interfaces vpp xconnect <vppxconN>", "source": "corpus", "command_original": "set interfaces vpp xconnect <vppxconN>"}
{"intent": "set port 7:13 speed to 1000", "vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure ports 7:13 speed 1000", "source": "corpus", "command_original": "configure ports 7:13 speed 1000"}
{"intent": "capture port 443 traffic on en0 to pcapng", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i en0 -f \"port 443\" -w /tmp/capture_en0_port_443.pcapng", "source": "corpus", "command_original": "tshark -i en0 -f \"port 443\" -w /tmp/capture_en0_port_443.pcapng"}
{"intent": "capture udp traffic on any interface", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i any -f \"udp\"", "source": "corpus", "command_original": "tshark -i any -f \"udp\""}
{"intent": "advertise network in ospf area", "vendor": "FRR", "os": "frr", "category": "System", "command": "network A.B.C.D/M area (0-4294967295)", "source": "corpus", "command_original": "network A.B.C.D/M area (0-4294967295)"}
{"intent": "show ethernet interface details", "vendor": "VyOS", "os": "vyos", "category": "Interfaces", "command": "show interfaces ethernet \\<interface>", "source": "corpus", "command_original": "show interfaces ethernet \\<interface>"}
{"intent": "disable vethernet 6 adapter", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Disable-NetAdapter -Name \"vEthernet 6\" -Confirm:$false", "source": "corpus", "command_original": "Disable-NetAdapter -Name \"vEthernet 6\" -Confirm:$false"}
{"intent": "capture traffic to 192.168.5.1 on any interface", "vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "tcpdump -i any -n -w /tmp/dump_5.pcap \"ip host 192.168.5.1\"", "source": "corpus", "command_original": "tcpdump -i any -n -w /tmp/dump_5.pcap \"ip host 192.168.5.1\""}
{"intent": "capture icmp traffic on br0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i br0 -f \"icmp\"", "source": "corpus", "command_original": "tshark -i br0 -f \"icmp\""}
{"intent": "show system users and processes", "vendor": "Cisco", "os": "ios", "category": "System", "command": "systat", "source": "corpus", "command_original": "systat"}
{"intent": "show configuration in pretty JSON format", "vendor": "VyOS", "os": "vyos", "category": "Troubleshooting", "command": "show configuration json pretty", "source": "corpus", "command_original": "show configuration json pretty"}
{"intent": "configure OSPFv3 area for IPv6", "vendor": "FRR", "os": "frr", "category": "System", "command": "ipv6 ospf6 area <A.B.C.D|(0-4294967295)>", "source": "corpus", "command_original": "ipv6 ospf6 area <A.B.C.D|(0-4294967295)>"}
{"intent": "enable BGP bestpath MED confederation", "vendor": "VyOS", "os": "vyos", "category": "BGP", "command": "set protocols bgp parameters bestpath med confed", "source": "corpus", "command_original": "set protocols bgp parameters bestpath med confed"}
{"intent": "delete console configuration settings", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config console del", "source": "corpus", "command_original": "config console del"}
{"intent": "configure logging server with info severity", "vendor": "Aruba", "os": "aoscx", "category": "Logging", "command": "logging server 192.168.100.3 severity info facility local0", "source": "corpus", "command_original": "logging server 192.168.100.3 severity info facility local0"}
{"intent": "modify SNMP trap configuration", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config snmptrap modify", "source": "corpus", "command_original": "config snmptrap modify"}
{"intent": "create admin role local user netengops-admin", "vendor": "Nokia", "os": "srlinux", "category": "AAA", "command": "set system aaa local-user netengops-admin role admin admin-state enable", "source": "corpus", "command_original": "set system aaa local-user netengops-admin role admin admin-state enable"}
{"intent": "clear all BGP neighbors in VRF", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "clear ip bgp neighbor [*] [vrf vrf_name] [reason", "source": "corpus", "command_original": "clear ip bgp neighbor [*] [vrf vrf_name] [reason"}
{"intent": "configure syslog server 192.168.10.16", "vendor": "PAN-OS", "os": "panos", "category": "Logging", "command": "set shared log-settings syslog Syslog_Profile server Syslog_Server16 server 192.168.10.16 port 514", "source": "corpus", "command_original": "set shared log-settings syslog Syslog_Profile server Syslog_Server16 server 192.168.10.16 port 514"}
{"intent": "add forward chain firewall filter rule", "vendor": "Mikrotik", "os": "routeros", "category": "ACL", "command": "/ip firewall filter add chain=forward action=accept src-address=192.168.11.0/24 comment=\"Filter rules for subnet 11\"", "source": "corpus", "command_original": "/ip firewall filter add chain=forward action=accept src-address=192.168.11.0/24 comment=\"Filter rules for subnet 11\""}
{"intent": "configure IPv4 address on ethernet-1/42", "vendor": "Nokia", "os": "srlinux", "category": "Interfaces", "command": "set interface ethernet-1/42 subinterface 0 ipv4 address 10.42.1.1/30", "source": "corpus", "command_original": "set interface ethernet-1/42 subinterface 0 ipv4 address 10.42.1.1/30"}
{"intent": "capture IP packets on loopback to file", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"ip\" -w /tmp/capture_lo_ip.pcapng", "source": "corpus", "command_original": "tshark -i lo -f \"ip\" -w /tmp/capture_lo_ip.pcapng"}
{"intent": "assign IP address to interface swp25", "vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface swp25 ip address 10.25.1.1/24", "source": "corpus", "command_original": "nv set interface swp25 ip address 10.25.1.1/24"}
{"intent": "set description for security policy rule", "vendor": "PAN-OS", "os": "panos", "category": "VLAN", "command": "set rulebase security rules Policy_Entry_118 description \"Firewall Policy Access control rule ID 118\"", "source": "corpus", "command_original": "set rulebase security rules Policy_Entry_118 description \"Firewall Policy Access control rule ID 118\""}
{"intent": "add port 3:21 untagged to VLAN 200", "vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "configure vlan Vlan-ID-200 add ports 3:21 untagged", "source": "corpus", "command_original": "configure vlan Vlan-ID-200 add ports 3:21 untagged"}
{"intent": "create prefix-list policy", "vendor": "VyOS", "os": "vyos", "category": "Misc", "command": "set policy prefix-list \\<text>", "source": "corpus", "command_original": "set policy prefix-list \\<text>"}
{"intent": "get vEthernet 16 network adapter", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetAdapter -Name \"vEthernet 16\"", "source": "corpus", "command_original": "Get-NetAdapter -Name \"vEthernet 16\""}
{"intent": "configure egress MAC filter to log and drop", "vendor": "Nokia", "os": "srlinux", "category": "ACL", "command": "set acl egress-mac-filtering acl-filter description entry action log drop", "source": "corpus", "command_original": "set acl egress-mac-filtering acl-filter description entry action log drop"}
{"intent": "get firewall rule by display name", "vendor": "Microsoft", "os": "powershell", "category": "Security", "command": "Get-NetFirewallRule -DisplayName \"Block Port 3016\"", "source": "corpus", "command_original": "Get-NetFirewallRule -DisplayName \"Block Port 3016\""}
{"intent": "accept tcp traffic on destination port 93", "vendor": "Linux", "os": "linux", "category": "Security", "command": "iptables -A INPUT -p tcp --dport 93 -j ACCEPT", "source": "corpus", "command_original": "iptables -A INPUT -p tcp --dport 93 -j ACCEPT"}
{"intent": "create user nocinfra-admin with admin role", "vendor": "NVIDIA", "os": "nvue", "category": "AAA", "command": "nv set system aaa user nocinfra-admin role admin", "source": "corpus", "command_original": "nv set system aaa user nocinfra-admin role admin"}
{"intent": "show directflow flows with optional counters", "vendor": "Arista", "os": "eos", "category": "System", "command": "show directflow flows [flow_name [counters | detail]]", "source": "corpus", "command_original": "show directflow flows [flow_name [counters | detail]]"}
{"intent": "configure vlan 780 with tag 780", "vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "configure vlan Vlan-ID-780 tag 780", "source": "corpus", "command_original": "configure vlan Vlan-ID-780 tag 780"}
{"intent": "capture icmp traffic on br0 to pcap", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i br0 -f \"icmp\" -w /tmp/capture_br0_icmp.pcapng", "source": "corpus", "command_original": "tshark -i br0 -f \"icmp\" -w /tmp/capture_br0_icmp.pcapng"}
{"intent": "capture port 179 traffic on en0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i en0 -f \"port 179\"", "source": "corpus", "command_original": "tshark -i en0 -f \"port 179\""}
{"intent": "configure bfd on lag interface", "vendor": "Nokia", "os": "srlinux", "category": "EtherChannel", "command": "set bfd subinterface micro-bfd-sessions lag-interface admin-state remote-address", "source": "corpus", "command_original": "set bfd subinterface micro-bfd-sessions lag-interface admin-state remote-address"}
{"intent": "set wifi adapter mtu to 7500", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetAdapter -Name \"Wi-Fi 14\" -MtuSize 7500", "source": "corpus", "command_original": "Set-NetAdapter -Name \"Wi-Fi 14\" -MtuSize 7500"}
{"intent": "set rib-in delay for bgp peer", "vendor": "Arista", "os": "eos", "category": "System", "command": "neighbor peer rib-in delay seconds event peer-init", "source": "corpus", "command_original": "neighbor peer rib-in delay seconds event peer-init"}
{"intent": "explain port acl user defined fields limits", "vendor": "Arista", "os": "eos", "category": "Routing", "command": "Port ACLs with User-Defined Fields Limitations", "source": "corpus", "command_original": "Port ACLs with User-Defined Fields Limitations"}
{"intent": "show thread cpu usage", "vendor": "FRR", "os": "frr", "category": "System", "command": "show thread cpu [FILTER]", "source": "corpus", "command_original": "show thread cpu [FILTER]"}
{"intent": "configure msdp peer sa-filter", "vendor": "FRR", "os": "frr", "category": "System", "command": "msdp peer A.B.C.D sa-filter ACL_NAME <in|out>", "source": "corpus", "command_original": "msdp peer A.B.C.D sa-filter ACL_NAME <in|out>"}
{"intent": "create vlan-250 on bridge interface", "vendor": "Mikrotik", "os": "routeros", "category": "VLAN", "command": "/interface vlan add name=vlan-250 vlan-id=250 interface=bridge-vlan-1", "source": "corpus", "command_original": "/interface vlan add name=vlan-250 vlan-id=250 interface=bridge-vlan-1"}
{"intent": "set stp path cost on port", "vendor": "Extreme", "os": "exos", "category": "Spanning-Tree", "command": "configure stpd STPD_Instance_3 ports 1:4 path-cost 13", "source": "corpus", "command_original": "configure stpd STPD_Instance_3 ports 1:4 path-cost 13"}
{"intent": "add static route via 10.255.0.2", "vendor": "NVIDIA", "os": "nvue", "category": "Routing", "command": "nv set vrfs default router static route 172.16.39.0/24 via 10.255.0.2", "source": "corpus", "command_original": "nv set vrfs default router static route 172.16.39.0/24 via 10.255.0.2"}
{"intent": "create ipv6 prefix-list rule with le 128", "vendor": "VyOS", "os": "vyos", "category": "Routing", "command": "set policy prefix-list6 PL6-EXAMPLE-NAME rule 20 le '128'", "source": "corpus", "command_original": "set policy prefix-list6 PL6-EXAMPLE-NAME rule 20 le '128'"}
{"intent": "add ip address 192.168.25.10 to eth1", "vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "ip addr add 192.168.25.10/24 dev eth1", "source": "corpus", "command_original": "ip addr add 192.168.25.10/24 dev eth1"}
{"intent": "enable cos-based random-detect", "vendor": "Cisco", "os": "ios", "category": "QoS", "command": "random-detect cos-based", "source": "corpus", "command_original": "random-detect cos-based"}
{"intent": "add vlan Vlan-ID-590 port 2:24 tagged", "vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "configure vlan Vlan-ID-590 add ports 2:24 tagged", "source": "corpus", "command_original": "configure vlan Vlan-ID-590 add ports 2:24 tagged"}
{"intent": "dir sslkey directory", "vendor": "Arista", "os": "eos", "category": "Security", "command": "dir sslkey:", "source": "corpus", "command_original": "dir sslkey:"}
{"intent": "enable ospf area 0 on ethernet1/12", "vendor": "PAN-OS", "os": "panos", "category": "OSPF", "command": "set network virtual-router default protocol ospf area 0.0.0.0 interface ethernet1/12 enable yes", "source": "corpus", "command_original": "set network virtual-router default protocol ospf area 0.0.0.0 interface ethernet1/12 enable yes"}
{"intent": "set pfcwd interval", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config pfcwd interval <interval_in_ms>", "source": "corpus", "command_original": "config pfcwd interval <interval_in_ms>"}
{"intent": "traceroute to 10.0.29.1 with numeric no dns", "vendor": "Linux", "os": "linux", "category": "Protocols", "command": "traceroute -n -w 2 -q 1 -m 30 10.0.29.1", "source": "corpus", "command_original": "traceroute -n -w 2 -q 1 -m 30 10.0.29.1"}
{"intent": "capture port 68 on wlan0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i wlan0 -f \"port 68\"", "source": "corpus", "command_original": "tshark -i wlan0 -f \"port 68\""}
{"intent": "enable ARP duplicate detection with EVPN advertisement", "vendor": "Nokia", "os": "srlinux", "category": "EVPN", "command": "set interface description subinterface type ipv4 admin-state arp duplicate-address-detection evpn advertise", "source": "corpus", "command_original": "set interface description subinterface type ipv4 admin-state arp duplicate-address-detection evpn advertise"}
{"intent": "reset DNS forwarding for all or specific domain", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "reset dns forwarding <all | domain>", "source": "corpus", "command_original": "reset dns forwarding <all | domain>"}
{"intent": "restart network adapter named LAN 31", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Restart-NetAdapter -Name \"LAN 31\"", "source": "corpus", "command_original": "Restart-NetAdapter -Name \"LAN 31\""}
{"intent": "bring up loopback interface in netns_57", "vendor": "Linux", "os": "linux", "category": "System", "command": "ip netns exec netns_57 ip link set lo up", "source": "corpus", "command_original": "ip netns exec netns_57 ip link set lo up"}
{"intent": "enable interface swp55", "vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface swp55 link state up", "source": "corpus", "command_original": "nv set interface swp55 link state up"}
{"intent": "filter for TCP destination port 122", "vendor": "Wireshark", "os": "tshark", "category": "Protocols", "command": "tcp.dstport == 122", "source": "corpus", "command_original": "tcp.dstport == 122"}
{"intent": "add swp8 to default bridge VLAN 80", "vendor": "NVIDIA", "os": "nvue", "category": "VLAN", "command": "nv set bridge domain default vlan 80 member interface swp8", "source": "corpus", "command_original": "nv set bridge domain default vlan 80 member interface swp8"}
{"intent": "create VLAN 30 subinterface on eth0", "vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "ip link add link eth0 name eth0.30 type vlan id 30", "source": "corpus", "command_original": "ip link add link eth0 name eth0.30 type vlan id 30"}
{"intent": "configure SNMP contact", "vendor": "SONiC", "os": "sonic", "category": "SNMP", "command": "config snmp contact add/del/modify", "source": "corpus", "command_original": "config snmp contact add/del/modify"}
{"intent": "apply all groups except ISIS-MPLS on ge-0/0/1", "vendor": "Juniper", "os": "junos", "category": "Routing", "command": "set interfaces ge-0/0/1 apply-groups-except ISIS-MPLS", "source": "corpus", "command_original": "set interfaces ge-0/0/1 apply-groups-except ISIS-MPLS"}
{"intent": "add forward chain drop rule for 192.168.10.0/24", "vendor": "Mikrotik", "os": "routeros", "category": "ACL", "command": "/ip firewall filter add chain=forward action=drop src-address=192.168.10.0/24 comment=\"Filter rules for subnet 10\"", "source": "corpus", "command_original": "/ip firewall filter add chain=forward action=drop src-address=192.168.10.0/24 comment=\"Filter rules for subnet 10\""}
{"intent": "enter application classifier name configuration", "vendor": "Cisco", "os": "ios", "category": "Interfaces", "command": "ac name", "source": "corpus", "command_original": "ac name"}
{"intent": "create VLAN-aware bridge with RSTP", "vendor": "Mikrotik", "os": "routeros", "category": "Spanning-Tree", "command": "/interface bridge add name=bridge-vlan-3 vlan-filtering=yes protocol-mode=rstp", "source": "corpus", "command_original": "/interface bridge add name=bridge-vlan-3 vlan-filtering=yes protocol-mode=rstp"}
{"intent": "capture TCP port 443 to pcapng file", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i any -f \"tcp port 443\" -w /tmp/capture_any_tcp_port_443.pcapng", "source": "corpus", "command_original": "tshark -i any -f \"tcp port 443\" -w /tmp/capture_any_tcp_port_443.pcapng"}
{"intent": "show BGP convergence status", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "show bgp convergence [VRF_INSTANCE]", "source": "corpus", "command_original": "show bgp convergence [VRF_INSTANCE]"}
{"intent": "set port 8:1 to full duplex", "vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure ports 8:1 duplex full", "source": "corpus", "command_original": "configure ports 8:1 duplex full"}
{"intent": "enable conntrack destroy event logging for TCP", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "set system conntrack log event destroy tcp", "source": "corpus", "command_original": "set system conntrack log event destroy tcp"}
{"intent": "configure NetFlow server address for flow accounting", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "set system flow-accounting netflow server \\<address>", "source": "corpus", "command_original": "set system flow-accounting netflow server \\<address>"}
{"intent": "set PPTP remote access shaper firewall mark", "vendor": "VyOS", "os": "vyos", "category": "VLAN", "command": "set vpn pptp remote-access shaper fwmark <1-2147483647>", "source": "corpus", "command_original": "set vpn pptp remote-access shaper fwmark <1-2147483647>"}
{"intent": "configure VPN nexthop export address", "vendor": "FRR", "os": "frr", "category": "System", "command": "nexthop vpn export A.B.C.D|X:X::X:X", "source": "corpus", "command_original": "nexthop vpn export A.B.C.D|X:X::X:X"}
{"intent": "enable TACACS for system login authentication", "vendor": "NVIDIA", "os": "nvue", "category": "AAA", "command": "nv set system aaa login-aaa tacacs", "source": "corpus", "command_original": "nv set system aaa login-aaa tacacs"}
{"intent": "capture port 5060 on docker0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i docker0 -f \"port 5060\"", "source": "corpus", "command_original": "tshark -i docker0 -f \"port 5060\""}
{"intent": "set source port range", "vendor": "FRR", "os": "frr", "category": "System", "command": "set src-port (1-65535)", "source": "corpus", "command_original": "set src-port (1-65535)"}
{"intent": "DNAT TCP port 119 to 10.0.0.39", "vendor": "Linux", "os": "linux", "category": "Security", "command": "iptables -t nat -A PREROUTING -p tcp --dport 119 -j DNAT --to-destination 10.0.0.39:119", "source": "corpus", "command_original": "iptables -t nat -A PREROUTING -p tcp --dport 119 -j DNAT --to-destination 10.0.0.39:119"}
{"intent": "clear BGP peer counters", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "clear ip bgp [PEERS] counters [VRF_INSTANCES]", "source": "corpus", "command_original": "clear ip bgp [PEERS] counters [VRF_INSTANCES]"}
{"intent": "capture 100 TCP port 129 packets on eth1", "vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "tcpdump -i eth1 -n -c 100 \"tcp port 129\"", "source": "corpus", "command_original": "tcpdump -i eth1 -n -c 100 \"tcp port 129\""}
{"intent": "show IP multicast routes", "vendor": "FRR", "os": "frr", "category": "System", "command": "show ip mroute [vrf NAME] [A.B.C.D [A.B.C.D]] [fill] [json]", "source": "corpus", "command_original": "show ip mroute [vrf NAME] [A.B.C.D [A.B.C.D]] [fill] [json]"}
{"intent": "capture port 80 on wlan0 to file", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i wlan0 -f \"port 80\" -w /tmp/capture_wlan0_port_80.pcapng", "source": "corpus", "command_original": "tshark -i wlan0 -f \"port 80\" -w /tmp/capture_wlan0_port_80.pcapng"}
{"intent": "set ethernet1/56 link speed to 10gbps", "vendor": "PAN-OS", "os": "panos", "category": "Interfaces", "command": "set network interface ethernet ethernet1/56 link-speed 10gbps", "source": "corpus", "command_original": "set network interface ethernet ethernet1/56 link-speed 10gbps"}
{"intent": "disable Ethernet 37 adapter", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Disable-NetAdapter -Name \"Ethernet 37\" -Confirm:$false", "source": "corpus", "command_original": "Disable-NetAdapter -Name \"Ethernet 37\" -Confirm:$false"}
{"intent": "request cfeb restart", "vendor": "Juniper", "os": "junos", "category": "System", "command": "request chassis cfeb", "source": "corpus", "command_original": "request chassis cfeb"}
{"intent": "set NTP server to 1.pool.ntp.org", "vendor": "Huawei", "os": "vrp", "category": "NTP", "command": "ntp-service unicast-server 1.pool.ntp.org", "source": "corpus", "command_original": "ntp-service unicast-server 1.pool.ntp.org"}
{"intent": "set console baud rate", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config console baud", "source": "corpus", "command_original": "config console baud"}
{"intent": "set admin-user password to plaintextpwd123", "vendor": "NVIDIA", "os": "nvue", "category": "AAA", "command": "nv set system aaa user admin-user password plaintextpwd123", "source": "corpus", "command_original": "nv set system aaa user admin-user password plaintextpwd123"}
{"intent": "show virtual chassis device topology", "vendor": "Juniper", "os": "junos", "category": "System", "command": "show virtual-chassis devicetopology (MX Series Virtual Chassis)", "source": "corpus", "command_original": "show virtual-chassis devicetopology (MX Series Virtual Chassis)"}
{"intent": "add ethernet1/5 to dmz layer3 zone", "vendor": "PAN-OS", "os": "panos", "category": "Security", "command": "set zone dmz network layer3 ethernet1/5", "source": "corpus", "command_original": "set zone dmz network layer3 ethernet1/5"}
{"intent": "drop ssh from 192.168.27.0/24", "vendor": "Linux", "os": "linux", "category": "Security", "command": "iptables -A INPUT -s 192.168.27.0/24 -p tcp --dport 22 -j DROP", "source": "corpus", "command_original": "iptables -A INPUT -s 192.168.27.0/24 -p tcp --dport 22 -j DROP"}
{"intent": "show IPv4 info for LAN 35", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetIPInterface -InterfaceAlias \"LAN 35\" -AddressFamily IPv4", "source": "corpus", "command_original": "Get-NetIPInterface -InterfaceAlias \"LAN 35\" -AddressFamily IPv4"}
{"intent": "set ether13 to 9000 mtu and 10Gbps", "vendor": "Mikrotik", "os": "routeros", "category": "Interfaces", "command": "/interface ethernet set ether13 mtu=9000 speed=10Gbps", "source": "corpus", "command_original": "/interface ethernet set ether13 mtu=9000 speed=10Gbps"}
{"intent": "configure isdn dialer", "vendor": "Cisco", "os": "ios", "category": "Interfaces", "command": "dialer isdn", "source": "corpus", "command_original": "dialer isdn"}
{"intent": "capture icmp on wlan1", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i wlan1 -f \"icmp\"", "source": "corpus", "command_original": "tshark -i wlan1 -f \"icmp\""}
{"intent": "restart Management 21 adapter", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Restart-NetAdapter -Name \"Management 21\"", "source": "corpus", "command_original": "Restart-NetAdapter -Name \"Management 21\""}
{"intent": "configure embedded rp group list", "vendor": "FRR", "os": "frr", "category": "Multicast", "command": "embedded-rp group-list PREFIX_LIST_NAME", "source": "corpus", "command_original": "embedded-rp group-list PREFIX_LIST_NAME"}
{"intent": "set flight recorder high cpu", "vendor": "Juniper", "os": "junos", "category": "System", "command": "request flight-recorder set highcpu", "source": "corpus", "command_original": "request flight-recorder set highcpu"}
{"intent": "set Vlan-ID-410 IP address", "vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "configure vlan Vlan-ID-410 ipaddress 10.41.1.1/24", "source": "corpus", "command_original": "configure vlan Vlan-ID-410 ipaddress 10.41.1.1/24"}
{"intent": "show bgp ipv4 summary", "vendor": "Cisco", "os": "ios", "category": "BGP", "command": "show ip bgp summary", "source": "corpus", "command_original": "show ip bgp summary"}
{"intent": "delete syslog configuration", "vendor": "SONiC", "os": "sonic", "category": "Logging", "command": "config syslog del", "source": "corpus", "command_original": "config syslog del"}
{"intent": "Enter configuration for Eth-Trunk 6", "vendor": "Huawei", "os": "vrp", "category": "System", "command": "interface Eth-Trunk 6", "source": "corpus", "command_original": "[Huawei] interface Eth-Trunk 6"}
{"intent": "Create network namespace netns_65", "vendor": "Linux", "os": "linux", "category": "System", "command": "ip netns add netns_65", "source": "corpus", "command_original": "ip netns add netns_65"}
{"intent": "Show running SNMP configuration", "vendor": "SONiC", "os": "sonic", "category": "SNMP", "command": "show runningconfiguration snmp", "source": "corpus", "command_original": "show runningconfiguration snmp"}
{"intent": "Set egress MAC filter on interface subinterface", "vendor": "Nokia", "os": "srlinux", "category": "ACL", "command": "set acl egress-mac-filtering interface interface-ref interface subinterface", "source": "corpus", "command_original": "set acl egress-mac-filtering interface interface-ref interface subinterface"}
{"intent": "Set MAC address timestamp property", "vendor": "Arista", "os": "eos", "category": "Troubleshooting", "command": "mac timestamp TS_PROPERTY", "source": "corpus", "command_original": "mac timestamp TS_PROPERTY"}
{"intent": "Set IPv6 MLD query max response time", "vendor": "FRR", "os": "frr", "category": "System", "command": "ipv6 mld query-max-response-time (1-65535)", "source": "corpus", "command_original": "ipv6 mld query-max-response-time (1-65535)"}
{"intent": "Filter display for IP address 172.16.37.1", "vendor": "Wireshark", "os": "tshark", "category": "Protocols", "command": "ip.addr == 172.16.37.1", "source": "corpus", "command_original": "ip.addr == 172.16.37.1"}
{"intent": "Set VLAN 670 description on default bridge", "vendor": "NVIDIA", "os": "nvue", "category": "VLAN", "command": "nv set bridge domain default vlan 670 description Vlan-Segment-ID-670", "source": "corpus", "command_original": "nv set bridge domain default vlan 670 description Vlan-Segment-ID-670"}
{"intent": "Set OSPF area NSSA range", "vendor": "FRR", "os": "frr", "category": "EVPN", "command": "area (0-4294967295) nssa range A.B.C.D/M [<not-advertise|cost (0-16777215)>]", "source": "corpus", "command_original": "area (0-4294967295) nssa range A.B.C.D/M [<not-advertise|cost (0-16777215)>]"}
{"intent": "Create DHCP pool 95 with range", "vendor": "Mikrotik", "os": "routeros", "category": "DHCP", "command": "/ip pool add name=dhcp-pool-95 ranges=192.168.95.10-192.168.95.100", "source": "corpus", "command_original": "/ip pool add name=dhcp-pool-95 ranges=192.168.95.10-192.168.95.100"}
{"intent": "Show spanning tree status", "vendor": "Aruba", "os": "aoscx", "category": "Spanning-Tree", "command": "show spanning-tree", "source": "corpus", "command_original": "show spanning-tree"}
{"intent": "Add swp28 as untagged member of VLAN 280", "vendor": "NVIDIA", "os": "nvue", "category": "VLAN", "command": "nv set bridge domain default vlan 280 untagged member interface swp28", "source": "corpus", "command_original": "nv set bridge domain default vlan 280 untagged member interface swp28"}
{"intent": "exit configuration mode and discard changes", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "exit \\[discard\\]", "source": "corpus", "command_original": "exit \\[discard\\]"}
{"intent": "enable conntrack logging for new other events", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "set system conntrack log event new other", "source": "corpus", "command_original": "set system conntrack log event new other"}
{"intent": "set motd banner to unauthorized access prohibited", "vendor": "Aruba", "os": "aoscx", "category": "VLAN", "command": "banner motd \"Unauthorized access is strictly prohibited on Aruba Switch!\"", "source": "corpus", "command_original": "banner motd \"Unauthorized access is strictly prohibited on Aruba Switch!\""}
{"intent": "enable debug for openfabric te-events", "vendor": "FRR", "os": "frr", "category": "OpenFabric", "command": "debug openfabric te-events", "source": "corpus", "command_original": "debug openfabric te-events"}
{"intent": "set description on interface swp62", "vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface swp62 description \"Link to server cabinet port swp62\"", "source": "corpus", "command_original": "nv set interface swp62 description \"Link to server cabinet port swp62\""}
{"intent": "configure snmp community public", "vendor": "Aruba", "os": "aoscx", "category": "SNMP", "command": "snmp-server community public", "source": "corpus", "command_original": "snmp-server community public"}
{"intent": "commit with comment Chris Parker adding BGP", "vendor": "Juniper", "os": "junos", "category": "BGP", "command": "commit comment Chris Parker, adding BGP to the box", "source": "corpus", "command_original": "commit comment Chris Parker, adding BGP to the box"}
{"intent": "calculate sha1 checksum of a file", "vendor": "Juniper", "os": "junos", "category": "System", "command": "file checksum sha1", "source": "corpus", "command_original": "file checksum sha1"}
{"intent": "create user secops-user with user role", "vendor": "NVIDIA", "os": "nvue", "category": "AAA", "command": "nv set system aaa user secops-user role user", "source": "corpus", "command_original": "nv set system aaa user secops-user role user"}
{"intent": "display brief interface information", "vendor": "Huawei", "os": "vrp", "category": "Interfaces", "command": "display interface brief", "source": "corpus", "command_original": "display interface brief"}
{"intent": "configure dhcp-client trace-options on ipv6 subinterface", "vendor": "Nokia", "os": "srlinux", "category": "DHCP", "command": "set interface description subinterface type ipv6 admin-state dhcp-client trace-options", "source": "corpus", "command_original": "set interface description subinterface type ipv6 admin-state dhcp-client trace-options"}
{"intent": "configure bsr candidate-rp for group 10.0.0.0/24", "vendor": "FRR", "os": "frr", "category": "Multicast", "command": "bsr candidate-rp group 10.0.0.0/24", "source": "corpus", "command_original": "bsr candidate-rp group 10.0.0.0/24"}
{"intent": "configure area 10 range 10.0.0.0/24", "vendor": "FRR", "os": "frr", "category": "OSPF", "command": "area 10 range 10.0.0.0/24 [advertise cost 10]", "source": "corpus", "command_original": "area 10 range 10.0.0.0/24 [advertise cost 10]"}
{"intent": "capture arp packets on interface eth0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i eth0 -f \"arp\"", "source": "corpus", "command_original": "tshark -i eth0 -f \"arp\""}
{"intent": "assign ethernet1/6 to voice zone", "vendor": "PAN-OS", "os": "panos", "category": "Security", "command": "set zone voice network layer3 ethernet1/6", "source": "corpus", "command_original": "set zone voice network layer3 ethernet1/6"}
{"intent": "copy vjunos image to jnode", "vendor": "Juniper", "os": "junos", "category": "System", "command": "request vmhost copy vjunos-tojnode", "source": "corpus", "command_original": "request vmhost copy vjunos-tojnode"}
{"intent": "add ethernet1/18 to default virtual-router", "vendor": "PAN-OS", "os": "panos", "category": "Interfaces", "command": "set network virtual-router default interface ethernet1/18", "source": "corpus", "command_original": "set network virtual-router default interface ethernet1/18"}
{"intent": "add static route to 172.16.18.0/24 via 10.1.1.18", "vendor": "Mikrotik", "os": "routeros", "category": "Routing", "command": "/ip route add dst-address=172.16.18.0/24 gateway=10.1.1.18 distance=1 comment=\"Static Route to Node 18\"", "source": "corpus", "command_original": "/ip route add dst-address=172.16.18.0/24 gateway=10.1.1.18 distance=1 comment=\"Static Route to Node 18\""}
{"intent": "clear service-set ids drop statistics", "vendor": "Juniper", "os": "junos", "category": "System", "command": "clear services service-set statistics ids drops", "source": "corpus", "command_original": "clear services service-set statistics ids drops"}
{"intent": "configure syslog server 192.168.100.21", "vendor": "Nokia", "os": "srlinux", "category": "Logging", "command": "set system syslog destination Syslog_Host_21 server 192.168.100.21 admin-state enable", "source": "corpus", "command_original": "set system syslog destination Syslog_Host_21 server 192.168.100.21 admin-state enable"}
{"intent": "show vxlan information for specific vxlan", "vendor": "SONiC", "os": "sonic", "category": "VXLAN", "command": "show vxlan name <vxlan_name>", "source": "corpus", "command_original": "show vxlan name <vxlan_name>"}
{"intent": "get network adapter named WAN 1", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetAdapter -Name \"WAN 1\"", "source": "corpus", "command_original": "Get-NetAdapter -Name \"WAN 1\""}
{"intent": "add static route 172.16.46.0/24 via 10.1.1.46", "vendor": "Nokia", "os": "srlinux", "category": "Routing", "command": "set network-instance default static-routes route 172.16.46.0/24 next-hop 10.1.1.46", "source": "corpus", "command_original": "set network-instance default static-routes route 172.16.46.0/24 next-hop 10.1.1.46"}
{"intent": "show extended information for interface 1/1/29", "vendor": "Aruba", "os": "aoscx", "category": "Interfaces", "command": "show interface 1/1/29 extended", "source": "corpus", "command_original": "show interface 1/1/29 extended"}
{"intent": "add remote syslog action to 192.168.200.5", "vendor": "Mikrotik", "os": "routeros", "category": "Logging", "command": "/system logging action add name=SyslogAction5 target=remote remote=192.168.200.5 remote-port=514", "source": "corpus", "command_original": "/system logging action add name=SyslogAction5 target=remote remote=192.168.200.5 remote-port=514"}
{"intent": "enable IPv6 link-local-only on interface", "vendor": "SONiC", "os": "sonic", "category": "Interfaces", "command": "config interface ipv6 enable use-link-local-only <interface_name>", "source": "corpus", "command_original": "config interface ipv6 enable use-link-local-only <interface_name>"}
{"intent": "set STPD instance 7 priority to 61440", "vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure stpd STPD_Instance_7 priority 61440", "source": "corpus", "command_original": "configure stpd STPD_Instance_7 priority 61440"}
{"intent": "assign ethernet1/1 to guest layer3 zone", "vendor": "PAN-OS", "os": "panos", "category": "Security", "command": "set zone guest network layer3 ethernet1/1", "source": "corpus", "command_original": "set zone guest network layer3 ethernet1/1"}
{"intent": "show SNMP contact in running config", "vendor": "SONiC", "os": "sonic", "category": "SNMP", "command": "show runningconfiguration snmp contact", "source": "corpus", "command_original": "show runningconfiguration snmp contact"}
{"intent": "add nft rule accept TCP port 86", "vendor": "Linux", "os": "linux", "category": "Security", "command": "nft add rule ip filter input tcp dport 86 accept", "source": "corpus", "command_original": "nft add rule ip filter input tcp dport 86 accept"}
{"intent": "configure flood and ECMP", "vendor": "Arista", "os": "eos", "category": "VLAN", "command": "flood, ECMP", "source": "corpus", "command_original": "flood, ECMP"}
{"intent": "set egress MAC filter description and log action", "vendor": "Nokia", "os": "srlinux", "category": "ACL", "command": "set acl egress-mac-filtering acl-filter description entry action log", "source": "corpus", "command_original": "set acl egress-mac-filtering acl-filter description entry action log"}
{"intent": "add portchannel member", "vendor": "SONiC", "os": "sonic", "category": "EtherChannel", "command": "config portchannel member", "source": "corpus", "command_original": "config portchannel member"}
{"intent": "enable jumbo frames on ports 2:3", "vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure ports 2:3 jumbo-frame on", "source": "corpus", "command_original": "configure ports 2:3 jumbo-frame on"}
{"intent": "restart Wi-Fi 19 adapter", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Restart-NetAdapter -Name \"Wi-Fi 19\"", "source": "corpus", "command_original": "Restart-NetAdapter -Name \"Wi-Fi 19\""}
{"intent": "clear IP traffic MTR counters", "vendor": "Cisco", "os": "ios", "category": "Routing", "command": "clear ip traffic (MTR)", "source": "corpus", "command_original": "clear ip traffic (MTR)"}
{"intent": "enable BGP keepalives debug", "vendor": "FRR", "os": "frr", "category": "System", "command": "debug bgp keepalives", "source": "corpus", "command_original": "debug bgp keepalives"}
{"intent": "add port 1:27 to MLAG peer 27", "vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure mlag peer MLAG_Virtual_Peer_27 member port 1:27", "source": "corpus", "command_original": "configure mlag peer MLAG_Virtual_Peer_27 member port 1:27"}
{"intent": "shutdown MSDP process", "vendor": "Cisco", "os": "ios", "category": "Multicast", "command": "ip msdp shutdown", "source": "corpus", "command_original": "ip msdp shutdown"}
{"intent": "toggle PIMv6 NHT debug", "vendor": "FRR", "os": "frr", "category": "System", "command": "debug pimv6 nht", "source": "corpus", "command_original": "[no] debug pimv6 nht"}
{"intent": "delete firewall rule BlockTCP_3079", "vendor": "Microsoft", "os": "powershell", "category": "Security", "command": "Remove-NetFirewallRule -Name \"BlockTCP_3079\"", "source": "corpus", "command_original": "Remove-NetFirewallRule -Name \"BlockTCP_3079\""}
{"intent": "set timezone offset -300 America/New_York", "vendor": "Extreme", "os": "exos", "category": "System", "command": "configure timezone -300 America/New_York", "source": "corpus", "command_original": "configure timezone -300 America/New_York"}
{"intent": "enable interface vlan400 link state", "vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface vlan400 link state up", "source": "corpus", "command_original": "nv set interface vlan400 link state up"}
{"intent": "capture icmp and ip on eth1", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i eth1 -f \"icmp and ip\"", "source": "corpus", "command_original": "tshark -i eth1 -f \"icmp and ip\""}
{"intent": "disable network adapter LAN 43", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Disable-NetAdapter -Name \"LAN 43\" -Confirm:$false", "source": "corpus", "command_original": "Disable-NetAdapter -Name \"LAN 43\" -Confirm:$false"}
{"intent": "add ip address 192.168.94.10 to Ethernet 94", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "New-NetIPAddress -InterfaceAlias \"Ethernet 94\" -IPAddress 192.168.94.10 -PrefixLength 24 -DefaultGateway 192.168.94.1", "source": "corpus", "command_original": "New-NetIPAddress -InterfaceAlias \"Ethernet 94\" -IPAddress 192.168.94.10 -PrefixLength 24 -DefaultGateway 192.168.94.1"}
{"intent": "enable dhcp snooping on vlan 200", "vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "enable ip-security dhcp-snooping vlan Vlan-ID-200", "source": "corpus", "command_original": "enable ip-security dhcp-snooping vlan Vlan-ID-200"}
{"intent": "add policy routing rule from 192.168.61.0/24", "vendor": "Linux", "os": "linux", "category": "Protocols", "command": "ip rule add from 192.168.61.0/24 table 161", "source": "corpus", "command_original": "ip rule add from 192.168.61.0/24 table 161"}
{"intent": "add bgp neighbor 10.255.41.1 AS 65041", "vendor": "Nokia", "os": "srlinux", "category": "BGP", "command": "set network-instance default protocols bgp neighbor 10.255.41.1 peer-as 65041 admin-state enable", "source": "corpus", "command_original": "set network-instance default protocols bgp neighbor 10.255.41.1 peer-as 65041 admin-state enable"}
{"intent": "set ipv6 address 2001:db8:43::1/64 on ethernet-1/43", "vendor": "Nokia", "os": "srlinux", "category": "Interfaces", "command": "set interface ethernet-1/43 subinterface 0 ipv6 address 2001:db8:43::1/64", "source": "corpus", "command_original": "set interface ethernet-1/43 subinterface 0 ipv6 address 2001:db8:43::1/64"}
{"intent": "capture icmp and ip on docker0 to pcapng", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i docker0 -f \"icmp and ip\" -w /tmp/capture_docker0_icmp_and_ip.pcapng", "source": "corpus", "command_original": "tshark -i docker0 -f \"icmp and ip\" -w /tmp/capture_docker0_icmp_and_ip.pcapng"}
{"intent": "match extcommunity in route map", "vendor": "FRR", "os": "frr", "category": "System", "command": "match extcommunity WORD [exact-match|any]", "source": "corpus", "command_original": "match extcommunity WORD [exact-match|any]"}
{"intent": "show isis adjacencies", "vendor": "Nokia", "os": "sros", "category": "ISIS", "command": "show router isis adjacency", "source": "corpus", "command_original": "show router isis adjacency"}
{"intent": "show BGP summary for all address families internal neighbors", "vendor": "FRR", "os": "frr", "category": "BGP", "command": "show bgp afi safi all summary remote-as internal json", "source": "corpus", "command_original": "show bgp afi safi all summary remote-as internal json"}
{"intent": "display BGP example 1 network diagram", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "BGP Example 1 Diagram", "source": "corpus", "command_original": "BGP Example 1 Diagram"}
{"intent": "enable OSPF on interface ethernet-1/52.0 in area 0", "vendor": "Nokia", "os": "srlinux", "category": "OSPF", "command": "set network-instance default protocols ospf instance 1 area 0.0.0.0 interface ethernet-1/52.0 admin-state enable", "source": "corpus", "command_original": "set network-instance default protocols ospf instance 1 area 0.0.0.0 interface ethernet-1/52.0 admin-state enable"}
{"intent": "capture loopback traffic on port 80", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"port 80\"", "source": "corpus", "command_original": "tshark -i lo -f \"port 80\""}
{"intent": "set mdns repeater cache entries limit", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "set service mdns repeater cache-entries <entries>", "source": "corpus", "command_original": "set service mdns repeater cache-entries <entries>"}
{"intent": "create operator user account with password", "vendor": "Extreme", "os": "exos", "category": "System", "command": "create account user operator-user-user-08 plaintextpwd123", "source": "corpus", "command_original": "create account user operator-user-user-08 plaintextpwd123"}
{"intent": "remove SNMP agent address", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config snmpagentaddress del", "source": "corpus", "command_original": "config snmpagentaddress del"}
{"intent": "limit bandwidth for host 192.168.1.85 to 20M", "vendor": "Mikrotik", "os": "routeros", "category": "System", "command": "/queue simple add name=Limit_Host_85 target=192.168.1.85/32 max-limit=20M/20M comment=\"Bandwidth limit for host 85\"", "source": "corpus", "command_original": "/queue simple add name=Limit_Host_85 target=192.168.1.85/32 max-limit=20M/20M comment=\"Bandwidth limit for host 85\""}
{"intent": "configure IPv6 DHCP client with tracing on subinterface", "vendor": "Nokia", "os": "srlinux", "category": "DHCP", "command": "set interface description subinterface type ipv6 admin-state dhcp-client trace-options trace", "source": "corpus", "command_original": "set interface description subinterface type ipv6 admin-state dhcp-client trace-options trace"}
{"intent": "display packets with source in 192.168.95.0/24", "vendor": "Wireshark", "os": "tshark", "category": "Protocols", "command": "ip.src == 192.168.95.0/24", "source": "corpus", "command_original": "ip.src == 192.168.95.0/24"}
{"intent": "debug RFAPI NVEs for VN 10.0.0.1", "vendor": "FRR", "os": "frr", "category": "Routing", "command": "debug rfapi-dev show nves vn 10.0.0.1", "source": "corpus", "command_original": "debug rfapi-dev show nves vn 10.0.0.1"}
{"intent": "set request timeout value", "vendor": "Cisco", "os": "ios", "category": "Protocols", "command": "req-timeout", "source": "corpus", "command_original": "req-timeout"}
{"intent": "set CPU time warning threshold to 10", "vendor": "FRR", "os": "frr", "category": "System", "command": "service cputime-warning 10", "source": "corpus", "command_original": "service cputime-warning 10"}
{"intent": "set BFD detect multiplier to 10", "vendor": "FRR", "os": "frr", "category": "BFD", "command": "detect-multiplier 10", "source": "corpus", "command_original": "detect-multiplier 10"}
{"intent": "login to vmhost jdm in chassis", "vendor": "Juniper", "os": "junos", "category": "System", "command": "request vmhost jdm login (InChassis Model)", "source": "corpus", "command_original": "request vmhost jdm login (InChassis Model)"}
{"intent": "capture icmp traffic on docker0 interface", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i docker0 -f \"icmp and ip\"", "source": "corpus", "command_original": "tshark -i docker0 -f \"icmp and ip\""}
{"intent": "show commit differences for specific revision", "vendor": "VyOS", "os": "vyos", "category": "Troubleshooting", "command": "show system commit diff <number>", "source": "corpus", "command_original": "show system commit diff <number>"}
{"intent": "show interface error counters", "vendor": "SONiC", "os": "sonic", "category": "Troubleshooting", "command": "show interfaces errors", "source": "corpus", "command_original": "show interfaces errors"}
{"intent": "enable link on ethernet1/43 interface", "vendor": "PAN-OS", "os": "panos", "category": "Interfaces", "command": "set network interface ethernet ethernet1/43 link-state up", "source": "corpus", "command_original": "set network interface ethernet ethernet1/43 link-state up"}
{"intent": "configure service engine hostname", "vendor": "Cisco", "os": "ios", "category": "System", "command": "service-engine hostname", "source": "corpus", "command_original": "service-engine hostname"}
{"intent": "enter data store configuration mode", "vendor": "Cisco", "os": "ios", "category": "Wireless", "command": "data-store", "source": "corpus", "command_original": "data-store"}
{"intent": "set BGP neighbor local role strict", "vendor": "FRR", "os": "frr", "category": "BGP", "command": "neighbor PEER local-role LOCAL-ROLE strict-mode", "source": "corpus", "command_original": "neighbor PEER local-role LOCAL-ROLE strict-mode"}
{"intent": "show specific prefix list sequence", "vendor": "FRR", "os": "frr", "category": "System", "command": "show ip prefix-list NAME seq NUM [json]", "source": "corpus", "command_original": "show ip prefix-list NAME seq NUM [json]"}
{"intent": "show control plane running configuration", "vendor": "Cisco", "os": "ios", "category": "Troubleshooting", "command": "show running-config control-plane", "source": "corpus", "command_original": "show running-config control-plane"}
{"intent": "capture dhcp traffic on docker0 to pcap", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i docker0 -f \"port 67\" -w /tmp/capture_docker0_port_67.pcapng", "source": "corpus", "command_original": "tshark -i docker0 -f \"port 67\" -w /tmp/capture_docker0_port_67.pcapng"}
{"intent": "clear gx-plus replay statistics", "vendor": "Juniper", "os": "junos", "category": "System", "command": "clear network-access gx-plus replay", "source": "corpus", "command_original": "clear network-access gx-plus replay"}
{"intent": "configure loopback interface", "vendor": "SONiC", "os": "sonic", "category": "Interfaces", "command": "config interface loopback", "source": "corpus", "command_original": "config interface loopback"}
{"intent": "create user with plaintext password", "vendor": "NVIDIA", "os": "nvue", "category": "AAA", "command": "nv set system aaa user secops-user password plaintextpwd123", "source": "corpus", "command_original": "nv set system aaa user secops-user password plaintextpwd123"}
{"intent": "set telegraf influxdb destination url", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "set service monitoring telegraf influxdb url <url>", "source": "corpus", "command_original": "set service monitoring telegraf influxdb url <url>"}
{"intent": "show bgp routes", "vendor": "Aruba", "os": "aoscx", "category": "Protocols", "command": "show ip route bgp", "source": "corpus", "command_original": "show ip route bgp"}
{"intent": "configure dhcp lease for mac to ip", "vendor": "Arista", "os": "eos", "category": "Interfaces", "command": "lease ip_address mac ip_address", "source": "corpus", "command_original": "lease ip_address mac ip_address"}
{"intent": "enable dhcp on WAN 16 interface", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetIPInterface -InterfaceAlias \"WAN 16\" -AddressFamily IPv4 -Dhcp Enabled", "source": "corpus", "command_original": "Set-NetIPInterface -InterfaceAlias \"WAN 16\" -AddressFamily IPv4 -Dhcp Enabled"}
{"intent": "set conntrack log level to info or debug", "vendor": "VyOS", "os": "vyos", "category": "Troubleshooting", "command": "set system conntrack log log-level <info | debug>", "source": "corpus", "command_original": "set system conntrack log log-level <info | debug>"}
{"intent": "configure ipv6 fib ecmp resilience for 2001:db8:0::/64", "vendor": "Arista", "os": "eos", "category": "Static", "command": "ipv6 hardware fib ecmp resilience 2001:db8:0::/64 capacity 5 redundancy 3", "source": "corpus", "command_original": "ipv6 hardware fib ecmp resilience 2001:db8:0::/64 capacity 5 redundancy 3"}
{"intent": "set write-quanta value between 1 and 64", "vendor": "FRR", "os": "frr", "category": "System", "command": "write-quanta (1-64)", "source": "corpus", "command_original": "write-quanta (1-64)"}
{"intent": "assign 10.255.0.26/32 to loopback0 subinterface 26", "vendor": "Nokia", "os": "srlinux", "category": "Interfaces", "command": "set interface loopback0 subinterface 26 ipv4 address 10.255.0.26/32", "source": "corpus", "command_original": "set interface loopback0 subinterface 26 ipv4 address 10.255.0.26/32"}
{"intent": "show transceiver dom on Ethernet11/1", "vendor": "Arista", "os": "eos", "category": "Interfaces", "command": "show interface Ethernet11/1 transceiver dom", "source": "corpus", "command_original": "show interface Ethernet11/1 transceiver dom"}
{"intent": "show ipv6 pim rpf for all vrfs", "vendor": "FRR", "os": "frr", "category": "System", "command": "show ipv6 pim vrf all rpf [json]", "source": "corpus", "command_original": "show ipv6 pim vrf all rpf [json]"}
{"intent": "ping destination host", "vendor": "VyOS", "os": "vyos", "category": "Troubleshooting", "command": "ping <destination>", "source": "corpus", "command_original": "ping <destination>"}
{"intent": "configure power over ethernet", "vendor": "Arista", "os": "eos", "category": "System", "command": "Power over Ethernet (PoE)", "source": "corpus", "command_original": "Power over Ethernet (PoE)"}
{"intent": "show ip msdp mesh-group for all vrfs", "vendor": "FRR", "os": "frr", "category": "Routing", "command": "show ip msdp vrf all mesh-group json", "source": "corpus", "command_original": "show ip msdp vrf all mesh-group json"}
{"intent": "disable Wi-Fi 8 adapter", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Disable-NetAdapter -Name \"Wi-Fi 8\" -Confirm:$false", "source": "corpus", "command_original": "Disable-NetAdapter -Name \"Wi-Fi 8\" -Confirm:$false"}
{"intent": "enable dhcp on Ethernet 20 interface", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetIPInterface -InterfaceAlias \"Ethernet 20\" -AddressFamily IPv4 -Dhcp Enabled", "source": "corpus", "command_original": "Set-NetIPInterface -InterfaceAlias \"Ethernet 20\" -AddressFamily IPv4 -Dhcp Enabled"}
{"intent": "set auto-config application timeout", "vendor": "Cisco", "os": "ios", "category": "Protocols", "command": "timeout (auto-config application)", "source": "corpus", "command_original": "timeout (auto-config application)"}
{"intent": "capture ip traffic on wlan1", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i wlan1 -f \"ip\"", "source": "corpus", "command_original": "tshark -i wlan1 -f \"ip\""}
{"intent": "resolve dns name domain-node32.internal.lan", "vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Resolve-DnsName -Name \"domain-node32.internal.lan\" -Type A", "source": "corpus", "command_original": "Resolve-DnsName -Name \"domain-node32.internal.lan\" -Type A"}
{"intent": "show igmp snooping groups with proxy", "vendor": "Arista", "os": "eos", "category": "Multicast", "command": "show ip igmp snooping groups proxy [VLAN_ID][PORT_INT][GROUPS][DATA local]", "source": "corpus", "command_original": "show ip igmp snooping groups proxy [VLAN_ID][PORT_INT][GROUPS][DATA local]"}
{"intent": "configure interface to-P1 with address 10.0.0.1/30", "vendor": "Nokia", "os": "sros", "category": "Interfaces", "command": "configure router interface \"to-P1\" address 10.0.0.1/30 port 1/1/1", "source": "corpus", "command_original": "configure router interface \"to-P1\" address 10.0.0.1/30 port 1/1/1"}
{"intent": "view port trust mode and traffic class settings", "vendor": "Arista", "os": "eos", "category": "QoS", "command": "Port Settings \u2013 Trust Mode and Traffic Class", "source": "corpus", "command_original": "Port Settings \u2013 Trust Mode and Traffic Class"}
{"intent": "configure BGP neighbor send-community settings", "vendor": "Arista", "os": "eos", "category": "System", "command": "neighbor [ipv4 [send-community [large]]| ipv6 | NAME | default | fe80::A:B:C:D% interface | interface]", "source": "corpus", "command_original": "neighbor [ipv4 [send-community [large]]| ipv6 | NAME | default | fe80::A:B:C:D% interface | interface]"}
{"intent": "show DHCP server address ranges", "vendor": "SONiC", "os": "sonic", "category": "Troubleshooting", "command": "show dhcp_server range", "source": "corpus", "command_original": "show dhcp_server range"}
{"intent": "power off specific fabric node device", "vendor": "Juniper", "os": "junos", "category": "System", "command": "request fabric administration power-off node-device", "source": "corpus", "command_original": "request fabric administration power-off node-device"}
{"intent": "set EVPN ES fragment limit to 10", "vendor": "FRR", "os": "frr", "category": "BGP", "command": "ead-es-frag evi-limit 10", "source": "corpus", "command_original": "ead-es-frag evi-limit 10"}
{"intent": "show OSPF multi-area configuration", "vendor": "Cisco", "os": "ios", "category": "OSPF", "command": "show ip ospf multi\u2013area", "source": "corpus", "command_original": "show ip ospf multi\u2013area"}
{"intent": "set description on ethernet-1/20 interface", "vendor": "Nokia", "os": "srlinux", "category": "Interfaces", "command": "set interface ethernet-1/20 description \"Cloud Fabric Interconnect ether-1/20\"", "source": "corpus", "command_original": "set interface ethernet-1/20 description \"Cloud Fabric Interconnect ether-1/20\""}
{"intent": "configure inactive MAC address peer-link behavior", "vendor": "Arista", "os": "eos", "category": "VLAN", "command": "inactive mac-address destination peer-link [direct | indirect]", "source": "corpus", "command_original": "inactive mac-address destination peer-link [direct | indirect]"}
{"intent": "configure autorp discovery interval and timers", "vendor": "FRR", "os": "frr", "category": "System", "command": "autorp send-rp-discovery {scope (0-255) | interval (1-65535) | holdtime (0-65535)}", "source": "corpus", "command_original": "autorp send-rp-discovery {scope (0-255) | interval (1-65535) | holdtime (0-65535)}"}
{"intent": "clear all IPv6 BGP neighbors", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "clear ipv6 bgp neighbor [*] [vrf vrf_name] [reason message]", "source": "corpus", "command_original": "clear ipv6 bgp neighbor [*] [vrf vrf_name] [reason message]"}
{"intent": "install new EOS software image", "vendor": "Arista", "os": "eos", "category": "System", "command": "Install the New EOS Image", "source": "corpus", "command_original": "Install the New EOS Image"}
{"intent": "set RIP update timer value", "vendor": "VyOS", "os": "vyos", "category": "Protocols", "command": "set protocols rip timers update \\<seconds>", "source": "corpus", "command_original": "set protocols rip timers update \\<seconds>"}
{"intent": "show LLDP neighbor table", "vendor": "SONiC", "os": "sonic", "category": "Troubleshooting", "command": "show lldp table", "source": "corpus", "command_original": "show lldp table"}
{"intent": "add route for 10.0.31.0 network", "vendor": "Linux", "os": "linux", "category": "Protocols", "command": "route add -net 10.0.31.0 netmask 255.255.255.0 gw 192.168.3.1", "source": "corpus", "command_original": "route add -net 10.0.31.0 netmask 255.255.255.0 gw 192.168.3.1"}
{"intent": "show management 50 network adapter", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetAdapter -Name \"Management 50\"", "source": "corpus", "command_original": "Get-NetAdapter -Name \"Management 50\""}
{"intent": "backup current system configuration", "vendor": "Juniper", "os": "junos", "category": "System", "command": "request system software configuration-backup", "source": "corpus", "command_original": "request system software configuration-backup"}
{"intent": "add swp58 to ospf area 0 in default vrf", "vendor": "NVIDIA", "os": "nvue", "category": "OSPF", "command": "nv set vrfs default router ospf area 0.0.0.0 member swp58", "source": "corpus", "command_original": "nv set vrfs default router ospf area 0.0.0.0 member swp58"}
{"intent": "delete route 10.0.100.0/24 via eth0", "vendor": "Linux", "os": "linux", "category": "Protocols", "command": "ip route del 10.0.100.0/24 dev eth0", "source": "corpus", "command_original": "ip route del 10.0.100.0/24 dev eth0"}
{"intent": "set management 4 mtu to 5500", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetAdapter -Name \"Management 4\" -MtuSize 5500", "source": "corpus", "command_original": "Set-NetAdapter -Name \"Management 4\" -MtuSize 5500"}
{"intent": "show ipv4 interface for Wi-Fi 31", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetIPInterface -InterfaceAlias \"Wi-Fi 31\" -AddressFamily IPv4", "source": "corpus", "command_original": "Get-NetIPInterface -InterfaceAlias \"Wi-Fi 31\" -AddressFamily IPv4"}
{"intent": "capture tcp port 80 on docker0 to file", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i docker0 -f \"tcp port 80\" -w /tmp/capture_docker0_tcp_port_80.pcapng", "source": "corpus", "command_original": "tshark -i docker0 -f \"tcp port 80\" -w /tmp/capture_docker0_tcp_port_80.pcapng"}
{"intent": "match ip next-hop in route map", "vendor": "FRR", "os": "frr", "category": "System", "command": "match ip next-hop WORD", "source": "corpus", "command_original": "match ip next-hop WORD"}
{"intent": "clear ospf6 authentication counters for interface", "vendor": "FRR", "os": "frr", "category": "System", "command": "clear ipv6 ospf6 [vrf VRF] auth-counters interface [IFNAME]", "source": "corpus", "command_original": "clear ipv6 ospf6 [vrf VRF] auth-counters interface [IFNAME]"}
{"intent": "set ethernet 45 mtu to 6500", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetAdapter -Name \"Ethernet 45\" -MtuSize 6500", "source": "corpus", "command_original": "Set-NetAdapter -Name \"Ethernet 45\" -MtuSize 6500"}
{"intent": "create ip-vrf vrf-cust-44 and enable", "vendor": "Nokia", "os": "srlinux", "category": "EVPN", "command": "set network-instance vrf-cust-44 type ip-vrf admin-state enable", "source": "corpus", "command_original": "set network-instance vrf-cust-44 type ip-vrf admin-state enable"}
{"intent": "show ipv6 pim rp-info for all vrfs", "vendor": "FRR", "os": "frr", "category": "System", "command": "show ipv6 pim vrf all rp-info [X:X::X:X/M] [json]", "source": "corpus", "command_original": "show ipv6 pim vrf all rp-info [X:X::X:X/M] [json]"}
{"intent": "show ospf routes matching 10.", "vendor": "Juniper", "os": "junos", "category": "OSPF", "command": "show route protocol ospf terse | match 10\\.", "source": "corpus", "command_original": "show route protocol ospf terse | match 10\\."}
{"intent": "show ipv4 interface for vEthernet 20", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetIPInterface -InterfaceAlias \"vEthernet 20\" -AddressFamily IPv4", "source": "corpus", "command_original": "Get-NetIPInterface -InterfaceAlias \"vEthernet 20\" -AddressFamily IPv4"}
{"intent": "set isis spf-delay-ietf long-delay timer", "vendor": "VyOS", "os": "vyos", "category": "Protocols", "command": "set protocols isis spf-delay-ietf long-delay \\<milliseconds>", "source": "corpus", "command_original": "set protocols isis spf-delay-ietf long-delay \\<milliseconds>"}
{"intent": "configure dspu physical unit sdlc", "vendor": "Cisco", "os": "ios", "category": "Protocols", "command": "dspu pu (SDLC)", "source": "corpus", "command_original": "dspu pu (SDLC)"}
{"intent": "capture udp port 53 on docker0 to pcapng", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i docker0 -f \"udp port 53\" -w /tmp/capture_docker0_udp_port_53.pcapng", "source": "corpus", "command_original": "tshark -i docker0 -f \"udp port 53\" -w /tmp/capture_docker0_udp_port_53.pcapng"}
{"intent": "copy file from https url", "vendor": "Cisco", "os": "ios", "category": "System", "command": "copy https://", "source": "corpus", "command_original": "copy https://"}
{"intent": "set ge-0/0/1 native vlan id to 1", "vendor": "Juniper", "os": "junos", "category": "VLAN", "command": "set interfaces ge-0/0/1 unit 0 family ethernet-switching native-vlan-id 1", "source": "corpus", "command_original": "set interfaces ge-0/0/1 unit 0 family ethernet-switching native-vlan-id 1"}
{"intent": "create vlan with id 430", "vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "create vlan Vlan-ID-430", "source": "corpus", "command_original": "create vlan Vlan-ID-430"}
{"intent": "filter from specific bgp peer", "vendor": "Arista", "os": "eos", "category": "Routing", "command": "from 10.2.0.101 (12.0.0.101)", "source": "corpus", "command_original": "from 10.2.0.101 (12.0.0.101)"}
{"intent": "add static route 10.10.10.0/24 via 10.0.0.2", "vendor": "Juniper", "os": "junos", "category": "Static", "command": "set routing-options static route 10.10.10.0/24 next-hop 10.0.0.2", "source": "corpus", "command_original": "set routing-options static route 10.10.10.0/24 next-hop 10.0.0.2"}
{"intent": "set system clock date", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config clock date", "source": "corpus", "command_original": "config clock date"}
{"intent": "set swp23 mtu to 9000", "vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface swp23 link mtu 9000", "source": "corpus", "command_original": "nv set interface swp23 link mtu 9000"}
{"intent": "capture TCP port 80 on wlan1", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i wlan1 -f \"tcp port 80\"", "source": "corpus", "command_original": "tshark -i wlan1 -f \"tcp port 80\""}
{"intent": "set ge-0/0/4 IP address 192.168.10.1/24", "vendor": "Juniper", "os": "junos", "category": "Interfaces", "command": "set interfaces ge-0/0/4 unit 0 family inet address 192.168.10.1/24", "source": "corpus", "command_original": "set interfaces ge-0/0/4 unit 0 family inet address 192.168.10.1/24"}
{"intent": "capture port 161 on br0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i br0 -f \"port 161\"", "source": "corpus", "command_original": "tshark -i br0 -f \"port 161\""}
{"intent": "show ipv6 ospf6 linkstate for 10.0.0.1", "vendor": "FRR", "os": "frr", "category": "OSPFv3", "command": "show ipv6 ospf6 vrf <MYNAME linkstate router 10.0.0.1", "source": "corpus", "command_original": "show ipv6 ospf6 vrf <MYNAME linkstate router 10.0.0.1"}
{"intent": "enable firewall rule BlockTCP_3043", "vendor": "Microsoft", "os": "powershell", "category": "Security", "command": "Set-NetFirewallRule -Name \"BlockTCP_3043\" -Enabled True", "source": "corpus", "command_original": "Set-NetFirewallRule -Name \"BlockTCP_3043\" -Enabled True"}
{"intent": "show reference for interface address", "vendor": "Juniper", "os": "junos", "category": "System", "command": "help reference interfaces address", "source": "corpus", "command_original": "help reference interfaces address"}
{"intent": "configure NAT settings", "vendor": "SONiC", "os": "sonic", "category": "NAT", "command": "config nat set", "source": "corpus", "command_original": "config nat set"}
{"intent": "set vEthernet 10 MTU to 3500", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetAdapter -Name \"vEthernet 10\" -MtuSize 3500", "source": "corpus", "command_original": "Set-NetAdapter -Name \"vEthernet 10\" -MtuSize 3500"}
{"intent": "add ethernet1/3 to partner zone", "vendor": "PAN-OS", "os": "panos", "category": "Security", "command": "set zone partner network layer3 ethernet1/3", "source": "corpus", "command_original": "set zone partner network layer3 ethernet1/3"}
{"intent": "enable mtrace debugging", "vendor": "FRR", "os": "frr", "category": "Multicast", "command": "debug mtrace", "source": "corpus", "command_original": "debug mtrace"}
{"intent": "create prefix-list MYNAME matching prefix with length", "vendor": "FRR", "os": "frr", "category": "AAA", "command": "ip prefix-list MYNAME (permit|deny) PREFIX le LEN ge LEN", "source": "corpus", "command_original": "ip prefix-list MYNAME (permit|deny) PREFIX le LEN ge LEN"}
{"intent": "disable detailed zebra mpls debugging", "vendor": "FRR", "os": "frr", "category": "Routing", "command": "no debug zebra mpls detailed", "source": "corpus", "command_original": "no debug zebra mpls detailed"}
{"intent": "set authentication failure rate limit", "vendor": "Cisco", "os": "ios", "category": "Security", "command": "security authentication failure rate", "source": "corpus", "command_original": "security authentication failure rate"}
{"intent": "list available network interfaces", "vendor": "Wireshark", "os": "tshark", "category": "System", "command": "tshark -D", "source": "corpus", "command_original": "tshark -D"}
{"intent": "send sharp opaque message", "vendor": "FRR", "os": "frr", "category": "System", "command": "sharp send opaque type (1-255) (1-1000)", "source": "corpus", "command_original": "sharp send opaque type (1-255) (1-1000)"}
{"intent": "add static ARP entry for 192.168.61.254", "vendor": "Linux", "os": "linux", "category": "Protocols", "command": "ip neigh add 192.168.61.254 lladdr 00:11:22:33:44:3d dev eth1", "source": "corpus", "command_original": "ip neigh add 192.168.61.254 lladdr 00:11:22:33:44:3d dev eth1"}
{"intent": "show address assignment pool", "vendor": "Juniper", "os": "junos", "category": "System", "command": "show network-access addressassignment pool (View)", "source": "corpus", "command_original": "show network-access addressassignment pool (View)"}
{"intent": "install license pak with call-home", "vendor": "Cisco", "os": "ios", "category": "System", "command": "license call-home install pak", "source": "corpus", "command_original": "license call-home install pak"}
{"intent": "disable IPv6 link-local addresses", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config ipv6 disable link-local", "source": "corpus", "command_original": "config ipv6 disable link-local"}
{"intent": "capture tcp traffic on docker0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i docker0 -f \"tcp\"", "source": "corpus", "command_original": "tshark -i docker0 -f \"tcp\""}
{"intent": "show msrp interface information", "vendor": "Arista", "os": "eos", "category": "System", "command": "show msrp [ INTERFACE_NAME]", "source": "corpus", "command_original": "show msrp [ INTERFACE_NAME]"}
{"intent": "enable csm voice debugging", "vendor": "Cisco", "os": "ios", "category": "Troubleshooting", "command": "debug csm voice", "source": "corpus", "command_original": "debug csm voice"}
{"intent": "Capture DHCP traffic on eth0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i eth0 -f \"port 67\"", "source": "corpus", "command_original": "tshark -i eth0 -f \"port 67\""}
{"intent": "Enable vEthernet 31 adapter", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Enable-NetAdapter -Name \"vEthernet 31\"", "source": "corpus", "command_original": "Enable-NetAdapter -Name \"vEthernet 31\""}
{"intent": "Add static ARP neighbor entry", "vendor": "Linux", "os": "linux", "category": "Protocols", "command": "ip neigh add 192.168.143.254 lladdr 00:11:22:33:44:8f dev eth3", "source": "corpus", "command_original": "ip neigh add 192.168.143.254 lladdr 00:11:22:33:44:8f dev eth3"}
{"intent": "Debug all spanning tree events", "vendor": "Cisco", "os": "ios", "category": "Spanning-Tree", "command": "debug spanningtree all", "source": "corpus", "command_original": "debug spanningtree all"}
{"intent": "Add Vlan-ID-20 to STPD_Instance_2", "vendor": "Extreme", "os": "exos", "category": "Spanning-Tree", "command": "configure stpd STPD_Instance_2 add vlan Vlan-ID-20", "source": "corpus", "command_original": "configure stpd STPD_Instance_2 add vlan Vlan-ID-20"}
{"intent": "Show EVPN BGP spine configuration", "vendor": "Arista", "os": "eos", "category": "EVPN", "command": "EVPN BGP Configuration on the Spine Switches", "source": "corpus", "command_original": "EVPN BGP Configuration on the Spine Switches"}
{"intent": "Set swp3 link speed to 10G", "vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface swp3 link speed 10g", "source": "corpus", "command_original": "nv set interface swp3 link speed 10g"}
{"intent": "Capture IPv6 on lo to file", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"ipv6\" -w /tmp/capture_lo_ipv6.pcapng", "source": "corpus", "command_original": "tshark -i lo -f \"ipv6\" -w /tmp/capture_lo_ipv6.pcapng"}
{"intent": "Show BGP labeled-unicast tunnels", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "show bgp labeled-unicast tunnel tunnel_index", "source": "corpus", "command_original": "show bgp labeled-unicast tunnel tunnel_index"}
{"intent": "Show NVGRE tunnel information", "vendor": "SONiC", "os": "sonic", "category": "Troubleshooting", "command": "show nvgre-tunnel", "source": "corpus", "command_original": "show nvgre-tunnel"}
{"intent": "Set T1 service-module data coding", "vendor": "Cisco", "os": "ios", "category": "Interfaces", "command": "service-module t1 data-coding", "source": "corpus", "command_original": "service-module t1 data-coding"}
{"intent": "show bgp summary for ipv4 or ipv6", "vendor": "VyOS", "os": "vyos", "category": "BGP", "command": "show bgp <ipv4|ipv6>", "source": "corpus", "command_original": "show bgp <ipv4|ipv6>"}
{"intent": "set comment and enable on ethernet interface", "vendor": "Mikrotik", "os": "routeros", "category": "Interfaces", "command": "/interface ethernet set ether3 comment=\"Aggregate Uplink ether3\" disabled=no", "source": "corpus", "command_original": "/interface ethernet set ether3 comment=\"Aggregate Uplink ether3\" disabled=no"}
{"intent": "enable debug for vtemplate subinterfaces", "vendor": "Cisco", "os": "ios", "category": "Interfaces", "command": "debug vtemplate subinterface", "source": "corpus", "command_original": "debug vtemplate subinterface"}
{"intent": "set layer3 interface ip address 10.60.1.1/24", "vendor": "PAN-OS", "os": "panos", "category": "Interfaces", "command": "set network interface ethernet ethernet1/60 layer3 ip 10.60.1.1/24", "source": "corpus", "command_original": "set network interface ethernet ethernet1/60 layer3 ip 10.60.1.1/24"}
{"intent": "set pptp remote access burst limit", "vendor": "VyOS", "os": "vyos", "category": "Misc", "command": "set vpn pptp remote-access limits burst \\<value>", "source": "corpus", "command_original": "set vpn pptp remote-access limits burst \\<value>"}
{"intent": "remove specific net ip address without confirmation", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Remove-NetIPAddress -IPAddress 192.168.50.10 -Confirm:$false", "source": "corpus", "command_original": "Remove-NetIPAddress -IPAddress 192.168.50.10 -Confirm:$false"}
{"intent": "configure l1 source interface or mac", "vendor": "Arista", "os": "eos", "category": "Interfaces", "command": "l1 source [interface | mac | none]", "source": "corpus", "command_original": "l1 source [interface | mac | none]"}
{"intent": "restart specific virtual ethernet adapter", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Restart-NetAdapter -Name \"vEthernet 21\"", "source": "corpus", "command_original": "Restart-NetAdapter -Name \"vEthernet 21\""}
{"intent": "list all command permutations", "vendor": "FRR", "os": "frr", "category": "System", "command": "list permutations", "source": "corpus", "command_original": "list permutations"}
{"intent": "enable voice iec statistics", "vendor": "Cisco", "os": "ios", "category": "Protocols", "command": "voice statistics type iec", "source": "corpus", "command_original": "voice statistics type iec"}
{"intent": "show lldp log entries", "vendor": "VyOS", "os": "vyos", "category": "Troubleshooting", "command": "show log lldp", "source": "corpus", "command_original": "show log lldp"}
{"intent": "configure traffic policy field set", "vendor": "Arista", "os": "eos", "category": "VLAN", "command": "traffic-policies field-set [integer | ipv4 | ipv6 | l4-ports | mac | vlan][prefix field_set_name |", "source": "corpus", "command_original": "traffic-policies field-set [integer | ipv4 | ipv6 | l4-ports | mac | vlan][prefix field_set_name |"}
{"intent": "enter CLI for specific VRF", "vendor": "Arista", "os": "eos", "category": "Routing", "command": "cli vrf [vrf_id]", "source": "corpus", "command_original": "cli vrf [vrf_id]"}
{"intent": "show running configuration", "vendor": "Aruba", "os": "aoscx", "category": "System", "command": "show running-config", "source": "corpus", "command_original": "show running-config"}
{"intent": "show ip routing table", "vendor": "Aruba", "os": "aoscx", "category": "Protocols", "command": "show ip route", "source": "corpus", "command_original": "show ip route"}
{"intent": "show nonstop upgrade status", "vendor": "Juniper", "os": "junos", "category": "System", "command": "show chassis nonstop-upgrade node-group", "source": "corpus", "command_original": "show chassis nonstop-upgrade node-group"}
{"intent": "configure radius server RAD1 with secret", "vendor": "PAN-OS", "os": "panos", "category": "AAA", "command": "set shared server-profile radius RAD1 server RAD1 address 10.0.0.10 secret SECRET", "source": "corpus", "command_original": "set shared server-profile radius RAD1 server RAD1 address 10.0.0.10 secret SECRET"}
{"intent": "disable openfabric update-packets debug", "vendor": "FRR", "os": "frr", "category": "Routing", "command": "no debug openfabric update-packets", "source": "corpus", "command_original": "no debug openfabric update-packets"}
{"intent": "match udp transport in class-map", "vendor": "Cisco", "os": "ios", "category": "Troubleshooting", "command": "match transport udp", "source": "corpus", "command_original": "match transport udp"}
{"intent": "assign ethernet1/12 to untrust zone", "vendor": "PAN-OS", "os": "panos", "category": "Security", "command": "set zone untrust network layer3 ethernet1/12", "source": "corpus", "command_original": "set zone untrust network layer3 ethernet1/12"}
{"intent": "assign ethernet1/3 to quarantine zone", "vendor": "PAN-OS", "os": "panos", "category": "Security", "command": "set zone quarantine network layer3 ethernet1/3", "source": "corpus", "command_original": "set zone quarantine network layer3 ethernet1/3"}
{"intent": "edit configuration group common", "vendor": "Juniper", "os": "junos", "category": "System", "command": "edit groups common", "source": "corpus", "command_original": "edit groups common"}
{"intent": "configure container registry", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "set container registry <name>", "source": "corpus", "command_original": "set container registry <name>"}
{"intent": "display tcp retransmissions on port 92", "vendor": "Wireshark", "os": "tshark", "category": "Protocols", "command": "tcp.analysis.retransmission && tcp.port == 92", "source": "corpus", "command_original": "tcp.analysis.retransmission && tcp.port == 92"}
{"intent": "set domain name security level to 5", "vendor": "Arista", "os": "eos", "category": "Interfaces", "command": "domain main-domain level 5", "source": "corpus", "command_original": "domain main-domain level 5"}
{"intent": "show ospf6 linkstate for specific router or network", "vendor": "FRR", "os": "frr", "category": "System", "command": "show ipv6 ospf6 [vrf <NAME|all>] linkstate <router A.B.C.D|network A.B.C.D A.B.C.D>", "source": "corpus", "command_original": "show ipv6 ospf6 [vrf <NAME|all>] linkstate <router A.B.C.D|network A.B.C.D A.B.C.D>"}
{"intent": "set BGP neighbor advertise-map with exist-map", "vendor": "FRR", "os": "frr", "category": "BGP", "command": "neighbor 10.0.0.1 advertise-map MYNAME exist-map MYNAME", "source": "corpus", "command_original": "neighbor 10.0.0.1 advertise-map MYNAME exist-map MYNAME"}
{"intent": "set management default secret hash algorithm", "vendor": "Arista", "os": "eos", "category": "System", "command": "management defaults secret hash [md5 | scrypt | sha-512 | yescrypt]", "source": "corpus", "command_original": "management defaults secret hash [md5 | scrypt | sha-512 | yescrypt]"}
{"intent": "enable ip routing on vlan 960", "vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "enable iprouting vlan Vlan-ID-960", "source": "corpus", "command_original": "enable iprouting vlan Vlan-ID-960"}
{"intent": "enable network adapter named LAN 2", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Enable-NetAdapter -Name \"LAN 2\"", "source": "corpus", "command_original": "Enable-NetAdapter -Name \"LAN 2\""}
{"intent": "show virtual-ethernet interfaces", "vendor": "Cisco", "os": "ios", "category": "Interfaces", "command": "show interface virtual-ethernet", "source": "corpus", "command_original": "show interface virtual-ethernet"}
{"intent": "activate BGP neighbor", "vendor": "FRR", "os": "frr", "category": "System", "command": "neighbor A.B.C.D activate", "source": "corpus", "command_original": "neighbor A.B.C.D activate"}
{"intent": "capture TCP traffic on en0 to pcapng", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i en0 -f \"tcp\" -w /tmp/capture_en0_tcp.pcapng", "source": "corpus", "command_original": "tshark -i en0 -f \"tcp\" -w /tmp/capture_en0_tcp.pcapng"}
{"intent": "show OSPF process route table", "vendor": "FRR", "os": "frr", "category": "System", "command": "show ip ospf (1-65535) route", "source": "corpus", "command_original": "show ip ospf (1-65535) route"}
{"intent": "stop JDM monitoring", "vendor": "Juniper", "os": "junos", "category": "System", "command": "monitor stop (JDM)", "source": "corpus", "command_original": "monitor stop (JDM)"}
{"intent": "set ethernet-1/13 MTU to 9000", "vendor": "Nokia", "os": "srlinux", "category": "Interfaces", "command": "set interface ethernet-1/13 ethernet mtu 9000", "source": "corpus", "command_original": "set interface ethernet-1/13 ethernet mtu 9000"}
{"intent": "add net route 10.0.81.0/24 via Ethernet 81", "vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "New-NetRoute -DestinationPrefix 10.0.81.0/24 -InterfaceAlias \"Ethernet 81\" -NextHop 192.168.81.1", "source": "corpus", "command_original": "New-NetRoute -DestinationPrefix 10.0.81.0/24 -InterfaceAlias \"Ethernet 81\" -NextHop 192.168.81.1"}
{"intent": "configure BGP AS 65000", "vendor": "Aruba", "os": "aoscx", "category": "Protocols", "command": "router bgp 65000", "source": "corpus", "command_original": "router bgp 65000"}
{"intent": "enable ISIS remote LFA MPLS LDP", "vendor": "FRR", "os": "frr", "category": "System", "command": "isis fast-reroute remote-lfa tunnel mpls-ldp [level-1 | level-2]", "source": "corpus", "command_original": "isis fast-reroute remote-lfa tunnel mpls-ldp [level-1 | level-2]"}
{"intent": "configure VRRP preempt on ge-0/0/10", "vendor": "Juniper", "os": "junos", "category": "HA", "command": "set interfaces ge-0/0/10 unit 0 family inet address 10.10.1.2/24 vrrp-group 10 preempt", "source": "corpus", "command_original": "set interfaces ge-0/0/10 unit 0 family inet address 10.10.1.2/24 vrrp-group 10 preempt"}
{"intent": "enable DHCP on interface LAN 19", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetIPInterface -InterfaceAlias \"LAN 19\" -AddressFamily IPv4 -Dhcp Enabled", "source": "corpus", "command_original": "Set-NetIPInterface -InterfaceAlias \"LAN 19\" -AddressFamily IPv4 -Dhcp Enabled"}
{"intent": "configure primary IPv6 address on subinterface", "vendor": "Nokia", "os": "srlinux", "category": "Interfaces", "command": "set interface description subinterface type ipv6 admin-state address type primary", "source": "corpus", "command_original": "set interface description subinterface type ipv6 admin-state address type primary"}
{"intent": "disable network adapter WAN 27", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Disable-NetAdapter -Name \"WAN 27\" -Confirm:$false", "source": "corpus", "command_original": "Disable-NetAdapter -Name \"WAN 27\" -Confirm:$false"}
{"intent": "reset bgp ipv6 neighbor", "vendor": "VyOS", "os": "vyos", "category": "BGP", "command": "reset bgp ipv6 <address>", "source": "corpus", "command_original": "reset bgp ipv6 <address>"}
{"intent": "add static route to null0", "vendor": "Cisco", "os": "ios", "category": "OSPF", "command": "ip route 12.0.0.0 255.0.0.0 null0", "source": "corpus", "command_original": "ip route 12.0.0.0 255.0.0.0 null0"}
{"intent": "add interface to vlan members", "vendor": "Juniper", "os": "junos", "category": "VLAN", "command": "set interfaces ge-0/0/4 unit 0 family ethernet-switching vlan members Vlan-ID-10", "source": "corpus", "command_original": "set interfaces ge-0/0/4 unit 0 family ethernet-switching vlan members Vlan-ID-10"}
{"intent": "set authentication order to tacplus", "vendor": "Juniper", "os": "junos", "category": "AAA", "command": "set system authentication-order tacplus", "source": "corpus", "command_original": "set system authentication-order tacplus"}
{"intent": "allow forward from 192.168.49.0/24 to 10.0.0.49", "vendor": "Linux", "os": "linux", "category": "Security", "command": "iptables -A FORWARD -s 192.168.49.0/24 -d 10.0.0.49 -j ACCEPT", "source": "corpus", "command_original": "iptables -A FORWARD -s 192.168.49.0/24 -d 10.0.0.49 -j ACCEPT"}
{"intent": "clear application identification statistics interval", "vendor": "Juniper", "os": "junos", "category": "System", "command": "clear services applicationidentification application-statistics interval", "source": "corpus", "command_original": "clear services applicationidentification application-statistics interval"}
{"intent": "enable NAT feature", "vendor": "SONiC", "os": "sonic", "category": "NAT", "command": "config nat feature", "source": "corpus", "command_original": "config nat feature"}
{"intent": "enable RUDPv1 debugging", "vendor": "Cisco", "os": "ios", "category": "Troubleshooting", "command": "debug rudpv1", "source": "corpus", "command_original": "debug rudpv1"}
{"intent": "configure default TACACS settings", "vendor": "SONiC", "os": "sonic", "category": "AAA", "command": "config tacacs default", "source": "corpus", "command_original": "config tacacs default"}
{"intent": "debug BGP RPKI events", "vendor": "Cisco", "os": "ios", "category": "BGP", "command": "debug ip bgp event rpki", "source": "corpus", "command_original": "debug ip bgp event rpki"}
{"intent": "configure sFlow settings", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config sflow", "source": "corpus", "command_original": "config sflow"}
{"intent": "capture ICMP and IP traffic on en0 to file", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i en0 -f \"icmp and ip\" -w /tmp/capture_en0_icmp_and_ip.pcapng", "source": "corpus", "command_original": "tshark -i en0 -f \"icmp and ip\" -w /tmp/capture_en0_icmp_and_ip.pcapng"}
{"intent": "configure inclusion list", "vendor": "Cisco", "os": "ios", "category": "Interfaces", "command": "inclusion-list", "source": "corpus", "command_original": "inclusion-list"}
{"intent": "show VRF MYNAME interface brief in JSON", "vendor": "FRR", "os": "frr", "category": "Routing", "command": "show interface vrf MYNAME brief json", "source": "corpus", "command_original": "show interface vrf MYNAME brief json"}
{"intent": "set OSPF p2p on ethernet1/23 area 0", "vendor": "PAN-OS", "os": "panos", "category": "OSPF", "command": "set network virtual-router default protocol ospf area 0.0.0.0 interface ethernet1/23 link-type p2p", "source": "corpus", "command_original": "set network virtual-router default protocol ospf area 0.0.0.0 interface ethernet1/23 link-type p2p"}
{"intent": "capture TCP traffic on en0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i en0 -f \"tcp\"", "source": "corpus", "command_original": "tshark -i en0 -f \"tcp\""}
{"intent": "set random-detect ECN delay threshold", "vendor": "Arista", "os": "eos", "category": "QoS", "command": "random-detect ecn delay threshold [microseconds | milliseconds ]", "source": "corpus", "command_original": "random-detect ecn delay threshold [microseconds | milliseconds ]"}
{"intent": "add static route 172.16.67.0/24 via 10.255.1.67", "vendor": "Extreme", "os": "exos", "category": "Routing", "command": "configure iproute add 172.16.67.0/24 10.255.1.67", "source": "corpus", "command_original": "configure iproute add 172.16.67.0/24 10.255.1.67"}
{"intent": "filter for DNS query server28.internal.net", "vendor": "Wireshark", "os": "tshark", "category": "Protocols", "command": "dns.qry.name == \"server28.internal.net\"", "source": "corpus", "command_original": "dns.qry.name == \"server28.internal.net\""}
{"intent": "filter for TCP port 83", "vendor": "Wireshark", "os": "tshark", "category": "Protocols", "command": "tcp.port == 83", "source": "corpus", "command_original": "tcp.port == 83"}
{"intent": "add IPv6 prefix-list rule 30 permit", "vendor": "VyOS", "os": "vyos", "category": "Routing", "command": "set policy prefix-list6 PL6-EXAMPLE-NAME rule 30 action 'permit'", "source": "corpus", "command_original": "set policy prefix-list6 PL6-EXAMPLE-NAME rule 30 action 'permit'"}
{"intent": "show stateful firewall SIP register", "vendor": "Juniper", "os": "junos", "category": "Troubleshooting", "command": "show services stateful-firewall sipregister", "source": "corpus", "command_original": "show services stateful-firewall sipregister"}
{"intent": "show MPLS LDP interfaces", "vendor": "FRR", "os": "frr", "category": "System", "command": "show mpls ldp [<ipv4|ipv6>] interface [json]", "source": "corpus", "command_original": "show mpls ldp [<ipv4|ipv6>] interface [json]"}
{"intent": "enable prometheus frr-exporter in VRF", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "set service monitoring prometheus frr-exporter vrf <name>", "source": "corpus", "command_original": "set service monitoring prometheus frr-exporter vrf <name>"}
{"intent": "capture UDP port 53 on loopback", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"udp port 53\" -w /tmp/capture_lo_udp_port_53.pcapng", "source": "corpus", "command_original": "tshark -i lo -f \"udp port 53\" -w /tmp/capture_lo_udp_port_53.pcapng"}
{"intent": "set ISIS SRGB high label value", "vendor": "VyOS", "os": "vyos", "category": "ISIS", "command": "set protocols isis segment-routing global-block high-label-value <label-value>", "source": "corpus", "command_original": "set protocols isis segment-routing global-block high-label-value <label-value>"}
{"intent": "configure management NIC SSL profile", "vendor": "Arista", "os": "eos", "category": "System", "command": "management nic profiles profile profile_name [connection [ssl profile", "source": "corpus", "command_original": "management nic profiles profile profile_name [connection [ssl profile"}
{"intent": "show BGP EVPN route tags", "vendor": "FRR", "os": "frr", "category": "EVPN", "command": "show ip bgp l2vpn evpn rd 65001:NN_OR_IP-ADDRESS:NN tags", "source": "corpus", "command_original": "show ip bgp l2vpn evpn rd 65001:NN_OR_IP-ADDRESS:NN tags"}
{"intent": "clear system log", "vendor": "Juniper", "os": "junos", "category": "System", "command": "clear log", "source": "corpus", "command_original": "clear log"}
{"intent": "power off VM host", "vendor": "Juniper", "os": "junos", "category": "System", "command": "request vmhost power-off", "source": "corpus", "command_original": "request vmhost power-off"}
{"intent": "show installed BGP routes", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "show ip bgp installed", "source": "corpus", "command_original": "show ip bgp installed"}
{"intent": "show specific VLAN details", "vendor": "Cisco", "os": "ios", "category": "VLAN", "command": "show vlan id 2", "source": "corpus", "command_original": "show vlan id 2"}
{"intent": "capture BGP port on loopback", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"port 179\" -w /tmp/capture_lo_port_179.pcapng", "source": "corpus", "command_original": "tshark -i lo -f \"port 179\" -w /tmp/capture_lo_port_179.pcapng"}
{"intent": "configure DHCP relay admin state", "vendor": "Nokia", "os": "srlinux", "category": "DHCP", "command": "set interface description subinterface type ipv4 admin-state dhcp-relay admin-state option", "source": "corpus", "command_original": "set interface description subinterface type ipv4 admin-state dhcp-relay admin-state option"}
{"intent": "enable Wi-Fi 14 network adapter", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Enable-NetAdapter -Name \"Wi-Fi 14\"", "source": "corpus", "command_original": "Enable-NetAdapter -Name \"Wi-Fi 14\""}
{"intent": "add Vlan-ID-80 to OSPF area 0", "vendor": "Extreme", "os": "exos", "category": "OSPF", "command": "configure ospf add vlan Vlan-ID-80 area 0.0.0.0", "source": "corpus", "command_original": "configure ospf add vlan Vlan-ID-80 area 0.0.0.0"}
{"intent": "enable ISDN NSF service", "vendor": "Cisco", "os": "ios", "category": "Interfaces", "command": "isdn nsf-service", "source": "corpus", "command_original": "isdn nsf-service"}
{"intent": "show OSPF opaque LSAs self-originated", "vendor": "FRR", "os": "frr", "category": "OSPF", "command": "show ip ospf vrf <MYNAME database (opaque-link|opaque-area|opaque-external) self-originate", "source": "corpus", "command_original": "show ip ospf vrf <MYNAME database (opaque-link|opaque-area|opaque-external) self-originate"}
{"intent": "show SSL Diffie-Hellman configuration", "vendor": "Arista", "os": "eos", "category": "System", "command": "show management security ssl diffie-hellman", "source": "corpus", "command_original": "show management security ssl diffie-hellman"}
{"intent": "create admin-12 user with administrator group", "vendor": "Aruba", "os": "aoscx", "category": "System", "command": "user admin-12 group administrators password plaintextpwd123", "source": "corpus", "command_original": "user admin-12 group administrators password plaintextpwd123"}
{"intent": "show interface hardware details", "vendor": "Arista", "os": "eos", "category": "System", "command": "show interfaces [interface] hardware", "source": "corpus", "command_original": "show interfaces [interface] hardware"}
{"intent": "create am-group template", "vendor": "Cisco", "os": "ios", "category": "Troubleshooting", "command": "template (am-group)", "source": "corpus", "command_original": "template (am-group)"}
{"intent": "assign ethernet1/2 to trust zone", "vendor": "PAN-OS", "os": "panos", "category": "Security", "command": "set zone trust network layer3 ethernet1/2", "source": "corpus", "command_original": "set zone trust network layer3 ethernet1/2"}
{"intent": "add description to egress MAC filter", "vendor": "Nokia", "os": "srlinux", "category": "ACL", "command": "set acl egress-mac-filtering acl-filter description entry match l2 ipv4 fragment destination-ip", "source": "corpus", "command_original": "set acl egress-mac-filtering acl-filter description entry match l2 ipv4 fragment destination-ip"}
{"intent": "create user neteng-user with user role", "vendor": "NVIDIA", "os": "nvue", "category": "AAA", "command": "nv set system aaa user neteng-user role user", "source": "corpus", "command_original": "nv set system aaa user neteng-user role user"}
{"intent": "configure multicast route for INTERFACE A.B.C.D", "vendor": "FRR", "os": "frr", "category": "System", "command": "ip mroute INTERFACE A.B.C.D [A.B.C.D]", "source": "corpus", "command_original": "ip mroute INTERFACE A.B.C.D [A.B.C.D]"}
{"intent": "install new Junos OS software package", "vendor": "Juniper", "os": "junos", "category": "System", "command": "request system software add (Junos OS)", "source": "corpus", "command_original": "request system software add (Junos OS)"}
{"intent": "create user operator-admin with admin role", "vendor": "NVIDIA", "os": "nvue", "category": "AAA", "command": "nv set system aaa user operator-admin role admin", "source": "corpus", "command_original": "nv set system aaa user operator-admin role admin"}
{"intent": "configure privacy policy settings", "vendor": "Cisco", "os": "ios", "category": "Security", "command": "privacy-policy", "source": "corpus", "command_original": "privacy-policy"}
{"intent": "enable OSPF opaque LSA", "vendor": "VyOS", "os": "vyos", "category": "OSPF", "command": "set protocols ospf parameters opaque-lsa", "source": "corpus", "command_original": "set protocols ospf parameters opaque-lsa"}
{"intent": "apply egress MAC filter on interface input", "vendor": "Nokia", "os": "srlinux", "category": "ACL", "command": "set acl egress-mac-filtering interface interface-ref input", "source": "corpus", "command_original": "set acl egress-mac-filtering interface interface-ref input"}
{"intent": "set default PBR IP feature", "vendor": "Arista", "os": "eos", "category": "System", "command": "default feature pbr ip [copy]", "source": "corpus", "command_original": "default feature pbr ip [copy]"}
{"intent": "load PKI CRL file", "vendor": "Juniper", "os": "junos", "category": "System", "command": "request security pki crl load", "source": "corpus", "command_original": "request security pki crl load"}
{"intent": "send logs to syslog host 192.168.100.5", "vendor": "Huawei", "os": "vrp", "category": "System", "command": "info-center loghost 192.168.100.5 local0 info", "source": "corpus", "command_original": "[Huawei] info-center loghost 192.168.100.5 local0 info"}
{"intent": "enable DHCP on vEthernet 8 IPv4", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetIPInterface -InterfaceAlias \"vEthernet 8\" -AddressFamily IPv4 -Dhcp Enabled", "source": "corpus", "command_original": "Set-NetIPInterface -InterfaceAlias \"vEthernet 8\" -AddressFamily IPv4 -Dhcp Enabled"}
{"intent": "show SSH log entries", "vendor": "VyOS", "os": "vyos", "category": "Troubleshooting", "command": "show log ssh", "source": "corpus", "command_original": "show log ssh"}
{"intent": "Configure TACACS login for specific VRF", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "set system login tacacs vrf \\<name>", "source": "corpus", "command_original": "set system login tacacs vrf \\<name>"}
{"intent": "Capture ICMP traffic on eth0 to pcapng file", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i eth0 -f \"icmp\" -w /tmp/capture_eth0_icmp.pcapng", "source": "corpus", "command_original": "tshark -i eth0 -f \"icmp\" -w /tmp/capture_eth0_icmp.pcapng"}
{"intent": "Configure BGP neighbor 10.255.100.25 with remote AS 65025", "vendor": "NVIDIA", "os": "nvue", "category": "BGP", "command": "nv set vrfs default router bgp neighbor 10.255.100.25 remote-as 65025", "source": "corpus", "command_original": "nv set vrfs default router bgp neighbor 10.255.100.25 remote-as 65025"}
{"intent": "Show passive monitoring flow statistics", "vendor": "Juniper", "os": "junos", "category": "System", "command": "show passive-monitoring flow", "source": "corpus", "command_original": "show passive-monitoring flow"}
{"intent": "Add ethernet-1/60.0 to VRF vrf-cust-60", "vendor": "Nokia", "os": "srlinux", "category": "Interfaces", "command": "set network-instance vrf-cust-60 interface ethernet-1/60.0", "source": "corpus", "command_original": "set network-instance vrf-cust-60 interface ethernet-1/60.0"}
{"intent": "Capture IP traffic on docker0 interface", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i docker0 -f \"ip\"", "source": "corpus", "command_original": "tshark -i docker0 -f \"ip\""}
{"intent": "Add tcp-established match to PROTECT-SNMP filter", "vendor": "Juniper", "os": "junos", "category": "ACL", "command": "set firewall filter PROTECT-SNMP term ALLOW-ESTABLISHED from tcp-established", "source": "corpus", "command_original": "set firewall filter PROTECT-SNMP term ALLOW-ESTABLISHED from tcp-established"}
{"intent": "Configure RIPng in specific VRF", "vendor": "FRR", "os": "frr", "category": "RIPng", "command": "router ripng vrf MYNAME", "source": "corpus", "command_original": "router ripng vrf MYNAME"}
{"intent": "Show DHCP server port bindings", "vendor": "SONiC", "os": "sonic", "category": "Interfaces", "command": "show dhcp_server port", "source": "corpus", "command_original": "show dhcp_server port"}
{"intent": "Set IPv6 interface description", "vendor": "Arista", "os": "eos", "category": "Routing", "command": "IPv6 Description", "source": "corpus", "command_original": "IPv6 Description"}
{"intent": "Show MPLS capacity status", "vendor": "Aruba", "os": "aoscx", "category": "MPLS", "command": "show capacities-status | include MPLS", "source": "corpus", "command_original": "show capacities-status | include MPLS"}
{"intent": "Capture UDP traffic on loopback to pcapng", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"udp\" -w /tmp/capture_lo_udp.pcapng", "source": "corpus", "command_original": "tshark -i lo -f \"udp\" -w /tmp/capture_lo_udp.pcapng"}
{"intent": "Configure kernel crash dump settings", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config kdump", "source": "corpus", "command_original": "config kdump"}
{"intent": "create vpp ipip tunnel interface", "vendor": "VyOS", "os": "vyos", "category": "Interfaces", "command": "set interfaces vpp ipip <vppipipN>", "source": "corpus", "command_original": "set interfaces vpp ipip <vppipipN>"}
{"intent": "match local preference in route map", "vendor": "FRR", "os": "frr", "category": "Routing", "command": "match local-preference METRIC", "source": "corpus", "command_original": "match local-preference METRIC"}
{"intent": "set vpn id for mpls", "vendor": "Cisco", "os": "ios", "category": "Security", "command": "vpn id (mpls)", "source": "corpus", "command_original": "vpn id (mpls)"}
{"intent": "set bgp igp next hop cost resolution", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "next-hop resolution rout igp-nexthop-cost protocol bgp", "source": "corpus", "command_original": "next-hop resolution rout igp-nexthop-cost protocol bgp"}
{"intent": "show IPv4 interface Ethernet 50", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetIPInterface -InterfaceAlias \"Ethernet 50\" -AddressFamily IPv4", "source": "corpus", "command_original": "Get-NetIPInterface -InterfaceAlias \"Ethernet 50\" -AddressFamily IPv4"}
{"intent": "filter sip invite to user32", "vendor": "Wireshark", "os": "tshark", "category": "Protocols", "command": "sip.method == \"INVITE\" && sip.to.user == \"user32\"", "source": "corpus", "command_original": "sip.method == \"INVITE\" && sip.to.user == \"user32\""}
{"intent": "create admin role for user admin-admin", "vendor": "NVIDIA", "os": "nvue", "category": "AAA", "command": "nv set system aaa user admin-admin role admin", "source": "corpus", "command_original": "nv set system aaa user admin-admin role admin"}
{"intent": "show dhcp scope 192.168.26.0", "vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Get-DhcpServerv4Scope -ScopeId 192.168.26.0", "source": "corpus", "command_original": "Get-DhcpServerv4Scope -ScopeId 192.168.26.0"}
{"intent": "enable ntp service", "vendor": "Aruba", "os": "aoscx", "category": "NTP", "command": "ntp enable", "source": "corpus", "command_original": "ntp enable"}
{"intent": "attach system cpu policer to egress mac filter", "vendor": "Nokia", "os": "srlinux", "category": "QoS", "command": "set acl egress-mac-filtering policers system-cpu-policer", "source": "corpus", "command_original": "set acl egress-mac-filtering policers system-cpu-policer"}
{"intent": "set ethernet1/41 layer3 uplink description", "vendor": "PAN-OS", "os": "panos", "category": "Interfaces", "command": "set network interface ethernet ethernet1/41 layer3 comment \"Port-Binding-Uplink-eth1/41\"", "source": "corpus", "command_original": "set network interface ethernet ethernet1/41 layer3 comment \"Port-Binding-Uplink-eth1/41\""}
{"intent": "set bgp update source interface", "vendor": "Arista", "os": "eos", "category": "Routing", "command": "update-source interface", "source": "corpus", "command_original": "update-source interface"}
{"intent": "capture SYN packets on port 79", "vendor": "Wireshark", "os": "tshark", "category": "Protocols", "command": "tcp.flags.syn == 1 && tcp.port == 79", "source": "corpus", "command_original": "tcp.flags.syn == 1 && tcp.port == 79"}
{"intent": "capture IPv6 traffic on interface en0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i en0 -f \"ipv6\"", "source": "corpus", "command_original": "tshark -i en0 -f \"ipv6\""}
{"intent": "set IPv6 MLD robustness value", "vendor": "FRR", "os": "frr", "category": "System", "command": "ipv6 mld robustness (1-255)", "source": "corpus", "command_original": "ipv6 mld robustness (1-255)"}
{"intent": "configure system clock timezone", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config clock timezone", "source": "corpus", "command_original": "config clock timezone"}
{"intent": "add DHCP helper 10.255.0.254 to VLAN 60", "vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "configure dhcp-relay add helper 10.255.0.254 vlan Vlan-ID-60", "source": "corpus", "command_original": "configure dhcp-relay add helper 10.255.0.254 vlan Vlan-ID-60"}
{"intent": "capture ICMP traffic on lo", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"icmp\"", "source": "corpus", "command_original": "tshark -i lo -f \"icmp\""}
{"intent": "clear enhanced loop-detect on all interfaces", "vendor": "Juniper", "os": "junos", "category": "System", "command": "clear loop-detect enhanced interface", "source": "corpus", "command_original": "clear loop-detect enhanced interface"}
{"intent": "show status of Ethernet 48", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetAdapter -Name \"Ethernet 48\"", "source": "corpus", "command_original": "Get-NetAdapter -Name \"Ethernet 48\""}
{"intent": "delete static route", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "config route del", "source": "corpus", "command_original": "config route del"}
{"intent": "capture ICMP traffic on eth0", "vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i eth0 -f \"icmp\"", "source": "corpus", "command_original": "tshark -i eth0 -f \"icmp\""}
{"intent": "show IPv6 multicast groups", "vendor": "VyOS", "os": "vyos", "category": "Troubleshooting", "command": "show ipv6 groups", "source": "corpus", "command_original": "show ipv6 groups"}
{"intent": "enable IPv6 OSPF area 1", "vendor": "Cisco", "os": "ios", "category": "OSPF", "command": "ipv6 ospf 1 area 1", "source": "corpus", "command_original": "ipv6 ospf 1 area 1"}
{"intent": "configure egress MAC filtering match list", "vendor": "Nokia", "os": "srlinux", "category": "ACL", "command": "set acl egress-mac-filtering match-list", "source": "corpus", "command_original": "set acl egress-mac-filtering match-list"}
{"intent": "show optics diagnostics profile", "vendor": "Juniper", "os": "junos", "category": "Interfaces", "command": "show interfaces diagnostics opticsprofile", "source": "corpus", "command_original": "show interfaces diagnostics opticsprofile"}
{"intent": "enable sflow on interface", "vendor": "VyOS", "os": "vyos", "category": "Interfaces", "command": "set system sflow interface <interface>", "source": "corpus", "command_original": "set system sflow interface <interface>"}
{"intent": "create user secops-admin with password", "vendor": "NVIDIA", "os": "nvue", "category": "AAA", "command": "nv set system aaa user secops-admin password plaintextpwd123", "source": "corpus", "command_original": "nv set system aaa user secops-admin password plaintextpwd123"}
{"intent": "enable default logging for IPv6 input filter", "vendor": "VyOS", "os": "vyos", "category": "ACL", "command": "set firewall ipv6 input filter default-log", "source": "corpus", "command_original": "set firewall ipv6 input filter default-log"}
{"intent": "configure eBGP neighbor 10.0.0.2 in AS 65002", "vendor": "Cisco", "os": "ios", "category": "BGP", "command": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002", "source": "curated", "command_original": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002"}
{"intent": "configure eBGP neighbor 10.0.0.2 with IPv4 unicast", "vendor": "Cisco", "os": "nxos", "category": "BGP", "command": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002\n  address-family ipv4 unicast", "source": "curated", "command_original": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002\n  address-family ipv4 unicast"}
{"intent": "configure external BGP group EXT peer 10.0.0.2 AS 65002", "vendor": "Juniper", "os": "junos", "category": "BGP", "command": "set protocols bgp group EXT type external\nset protocols bgp group EXT peer-as 65002\nset protocols bgp group EXT neighbor 10.0.0.2", "source": "curated", "command_original": "set protocols bgp group EXT type external\nset protocols bgp group EXT peer-as 65002\nset protocols bgp group EXT neighbor 10.0.0.2"}
{"intent": "configure eBGP neighbor 10.0.0.2 in AS 65002", "vendor": "Arista", "os": "eos", "category": "BGP", "command": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002", "source": "curated", "command_original": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002"}
{"intent": "configure eBGP neighbor 10.0.0.2 with update-source loopback", "vendor": "FRR", "os": "frr", "category": "BGP", "command": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002\n neighbor 10.0.0.2 update-source lo", "source": "curated", "command_original": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002\n neighbor 10.0.0.2 update-source lo"}
{"intent": "configure BGP neighbor 10.0.0.2 remote-as 65002", "vendor": "VyOS", "os": "vyos", "category": "BGP", "command": "set protocols bgp 65001 neighbor 10.0.0.2 remote-as 65002", "source": "curated", "command_original": "set protocols bgp 65001 neighbor 10.0.0.2 remote-as 65002"}
{"intent": "configure BGP peer 10.0.0.2 AS 65002 on LoopBack0", "vendor": "Huawei", "os": "vrp", "category": "BGP", "command": "bgp 65001\n peer 10.0.0.2 as-number 65002\n peer 10.0.0.2 connect-interface LoopBack0", "source": "curated", "command_original": "bgp 65001\n peer 10.0.0.2 as-number 65002\n peer 10.0.0.2 connect-interface LoopBack0"}
{"intent": "configure eBGP neighbor 10.0.0.2 in AS 65002", "vendor": "Aruba", "os": "aoscx", "category": "BGP", "command": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002", "source": "curated", "command_original": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002"}
{"intent": "configure BGP neighbor 10.0.0.2 remote-as 65002", "vendor": "FortiOS", "os": "fortios", "category": "BGP", "command": "config router bgp\n set as 65001\n config neighbor\n  edit 10.0.0.2\n   set remote-as 65002\n  next\n end\nend", "source": "curated", "command_original": "config router bgp\n set as 65001\n config neighbor\n  edit 10.0.0.2\n   set remote-as 65002\n  next\n end\nend"}
{"intent": "configure BGP peer PEER at 10.0.0.2 with AS 65002", "vendor": "PAN-OS", "os": "panos", "category": "BGP", "command": "set network virtual-router default protocol bgp enable yes\nset network virtual-router default protocol bgp local-as 65001\nset network virtual-router default protocol bgp peer-group EXT peer PEER peer-as 65002\nset network virtual-router default protocol bgp peer-group EXT peer PEER peer-address ip 10.0.0.2", "source": "curated", "command_original": "set network virtual-router default protocol bgp enable yes\nset network virtual-router default protocol bgp local-as 65001\nset network virtual-router default protocol bgp peer-group EXT peer PEER peer-as 65002\nset network virtual-router default protocol bgp peer-group EXT peer PEER peer-address ip 10.0.0.2"}
{"intent": "configure BGP neighbor 10.0.0.2 remote-as 65002", "vendor": "NVIDIA", "os": "nvue", "category": "BGP", "command": "nv set router bgp autonomous-system 65001\nnv set vrf default router bgp neighbor 10.0.0.2 remote-as 65002", "source": "curated", "command_original": "nv set router bgp autonomous-system 65001\nnv set vrf default router bgp neighbor 10.0.0.2 remote-as 65002"}
{"intent": "configure BGP neighbor 10.0.0.2 peer-as 65002", "vendor": "Nokia", "os": "srlinux", "category": "BGP", "command": "set / network-instance default protocols bgp autonomous-system 65001\nset / network-instance default protocols bgp neighbor 10.0.0.2 peer-as 65002", "source": "curated", "command_original": "set / network-instance default protocols bgp autonomous-system 65001\nset / network-instance default protocols bgp neighbor 10.0.0.2 peer-as 65002"}
{"intent": "configure eBGP neighbor 10.0.0.2 in AS 65002", "vendor": "SONiC", "os": "sonic", "category": "BGP", "command": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002", "source": "curated", "command_original": "router bgp 65001\n neighbor 10.0.0.2 remote-as 65002"}
{"intent": "configure OSPF process 1 with network 10.0.0.0/24 in area 0", "vendor": "Cisco", "os": "ios", "category": "OSPF", "command": "router ospf 1\n router-id 1.1.1.1\n network 10.0.0.0 0.0.0.255 area 0", "source": "curated", "command_original": "router ospf 1\n router-id 1.1.1.1\n network 10.0.0.0 0.0.0.255 area 0"}
{"intent": "enable OSPF on Ethernet1/1 in area 0 with router-id 1.1.1.1", "vendor": "Cisco", "os": "nxos", "category": "OSPF", "command": "feature ospf\nrouter ospf UNDERLAY\n router-id 1.1.1.1\ninterface Ethernet1/1\n ip router ospf UNDERLAY area 0.0.0.0", "source": "curated", "command_original": "feature ospf\nrouter ospf UNDERLAY\n router-id 1.1.1.1\ninterface Ethernet1/1\n ip router ospf UNDERLAY area 0.0.0.0"}
{"intent": "enable OSPF on interface ge-0/0/0.0 in area 0", "vendor": "Juniper", "os": "junos", "category": "OSPF", "command": "set protocols ospf area 0.0.0.0 interface ge-0/0/0.0", "source": "curated", "command_original": "set protocols ospf area 0.0.0.0 interface ge-0/0/0.0"}
{"intent": "configure OSPF area 0 for network 10.0.0.0/24", "vendor": "VyOS", "os": "vyos", "category": "OSPF", "command": "set protocols ospf parameters router-id 1.1.1.1\nset protocols ospf area 0 network 10.0.0.0/24", "source": "curated", "command_original": "set protocols ospf parameters router-id 1.1.1.1\nset protocols ospf area 0 network 10.0.0.0/24"}
{"intent": "configure OSPF network 10.0.0.0/24 in area 0", "vendor": "Huawei", "os": "vrp", "category": "OSPF", "command": "ospf 1 router-id 1.1.1.1\n area 0.0.0.0\n  network 10.0.0.0 0.0.0.255", "source": "curated", "command_original": "ospf 1 router-id 1.1.1.1\n area 0.0.0.0\n  network 10.0.0.0 0.0.0.255"}
{"intent": "configure OSPF area 0 with router-id 1.1.1.1", "vendor": "Aruba", "os": "aoscx", "category": "OSPF", "command": "router ospf 1\n router-id 1.1.1.1\n area 0.0.0.0", "source": "curated", "command_original": "router ospf 1\n router-id 1.1.1.1\n area 0.0.0.0"}
{"intent": "configure OSPF network 10.0.0.0/24 in area 0", "vendor": "FortiOS", "os": "fortios", "category": "OSPF", "command": "config router ospf\n set router-id 1.1.1.1\n config area\n  edit 0.0.0.0\n  next\n end\n config network\n  edit 1\n   set prefix 10.0.0.0 255.255.255.0\n   set area 0.0.0.0\n  next\n end\nend", "source": "curated", "command_original": "config router ospf\n set router-id 1.1.1.1\n config area\n  edit 0.0.0.0\n  next\n end\n config network\n  edit 1\n   set prefix 10.0.0.0 255.255.255.0\n   set area 0.0.0.0\n  next\n end\nend"}
{"intent": "enable OSPF on ethernet1/1 in area 0 with router-id", "vendor": "PAN-OS", "os": "panos", "category": "OSPF", "command": "set network virtual-router default protocol ospf enable yes\nset network virtual-router default protocol ospf router-id 1.1.1.1\nset network virtual-router default protocol ospf area 0.0.0.0 interface ethernet1/1 enable yes", "source": "curated", "command_original": "set network virtual-router default protocol ospf enable yes\nset network virtual-router default protocol ospf router-id 1.1.1.1\nset network virtual-router default protocol ospf area 0.0.0.0 interface ethernet1/1 enable yes"}
{"intent": "configure OSPF on networks 10.0.0.0/24 in backbone area", "vendor": "Mikrotik", "os": "routeros", "category": "OSPF", "command": "/routing ospf instance add name=default router-id=1.1.1.1\n/routing ospf area add name=backbone area-id=0.0.0.0 instance=default\n/routing ospf interface-template add area=backbone networks=10.0.0.0/24", "source": "curated", "command_original": "/routing ospf instance add name=default router-id=1.1.1.1\n/routing ospf area add name=backbone area-id=0.0.0.0 instance=default\n/routing ospf interface-template add area=backbone networks=10.0.0.0/24"}
{"intent": "enable OSPF on interface swp1 in area 0", "vendor": "NVIDIA", "os": "nvue", "category": "OSPF", "command": "nv set vrf default router ospf enable on\nnv set vrf default router ospf router-id 1.1.1.1\nnv set interface swp1 router ospf area 0", "source": "curated", "command_original": "nv set vrf default router ospf enable on\nnv set vrf default router ospf router-id 1.1.1.1\nnv set interface swp1 router ospf area 0"}
{"intent": "configure OSPF on ethernet-1/1 in area 0", "vendor": "Nokia", "os": "srlinux", "category": "OSPF", "command": "set / network-instance default protocols ospf instance 1 router-id 1.1.1.1\nset / network-instance default protocols ospf instance 1 area 0.0.0.0 interface ethernet-1/1", "source": "curated", "command_original": "set / network-instance default protocols ospf instance 1 router-id 1.1.1.1\nset / network-instance default protocols ospf instance 1 area 0.0.0.0 interface ethernet-1/1"}
{"intent": "configure interface GigabitEthernet0/0 with IP 10.0.0.1/24", "vendor": "Cisco", "os": "ios", "category": "Interfaces", "command": "interface GigabitEthernet0/0\n description UPLINK\n ip address 10.0.0.1 255.255.255.0\n no shutdown", "source": "curated", "command_original": "interface GigabitEthernet0/0\n description UPLINK\n ip address 10.0.0.1 255.255.255.0\n no shutdown"}
{"intent": "configure interface Ethernet1/1 with IP 10.0.0.1/24", "vendor": "Cisco", "os": "nxos", "category": "Interfaces", "command": "interface Ethernet1/1\n description UPLINK\n no switchport\n ip address 10.0.0.1/24\n no shutdown", "source": "curated", "command_original": "interface Ethernet1/1\n description UPLINK\n no switchport\n ip address 10.0.0.1/24\n no shutdown"}
{"intent": "configure interface ge-0/0/0 with IP 10.0.0.1/24", "vendor": "Juniper", "os": "junos", "category": "Interfaces", "command": "set interfaces ge-0/0/0 description UPLINK\nset interfaces ge-0/0/0 unit 0 family inet address 10.0.0.1/24", "source": "curated", "command_original": "set interfaces ge-0/0/0 description UPLINK\nset interfaces ge-0/0/0 unit 0 family inet address 10.0.0.1/24"}
{"intent": "configure interface Ethernet1 with IP 10.0.0.1/24", "vendor": "Arista", "os": "eos", "category": "Interfaces", "command": "interface Ethernet1\n description UPLINK\n no switchport\n ip address 10.0.0.1/24", "source": "curated", "command_original": "interface Ethernet1\n description UPLINK\n no switchport\n ip address 10.0.0.1/24"}
{"intent": "configure ethernet eth0 with IP 10.0.0.1/24", "vendor": "VyOS", "os": "vyos", "category": "Interfaces", "command": "set interfaces ethernet eth0 description UPLINK\nset interfaces ethernet eth0 address 10.0.0.1/24", "source": "curated", "command_original": "set interfaces ethernet eth0 description UPLINK\nset interfaces ethernet eth0 address 10.0.0.1/24"}
{"intent": "configure vlan UNDERLAY with IP 10.0.0.1/24", "vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure vlan UNDERLAY ipaddress 10.0.0.1 255.255.255.0", "source": "curated", "command_original": "configure vlan UNDERLAY ipaddress 10.0.0.1 255.255.255.0"}
{"intent": "configure interface port1 with IP 10.0.0.1/24", "vendor": "FortiOS", "os": "fortios", "category": "Interfaces", "command": "config system interface\n edit port1\n  set alias UPLINK\n  set ip 10.0.0.1 255.255.255.0\n  set allowaccess ping https ssh\n next\nend", "source": "curated", "command_original": "config system interface\n edit port1\n  set alias UPLINK\n  set ip 10.0.0.1 255.255.255.0\n  set allowaccess ping https ssh\n next\nend"}
{"intent": "configure ethernet1/1 with IP 10.0.0.1/24 and UPLINK comment", "vendor": "PAN-OS", "os": "panos", "category": "Interfaces", "command": "set network interface ethernet ethernet1/1 layer3 ip 10.0.0.1/24\nset network interface ethernet ethernet1/1 comment UPLINK", "source": "curated", "command_original": "set network interface ethernet ethernet1/1 layer3 ip 10.0.0.1/24\nset network interface ethernet ethernet1/1 comment UPLINK"}
{"intent": "add IP address 10.0.0.1/24 to ether1 with UPLINK comment", "vendor": "Mikrotik", "os": "routeros", "category": "Interfaces", "command": "/ip address add address=10.0.0.1/24 interface=ether1 comment=UPLINK", "source": "curated", "command_original": "/ip address add address=10.0.0.1/24 interface=ether1 comment=UPLINK"}
{"intent": "set swp1 description to UPLINK and IP 10.0.0.1/24", "vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface swp1 description UPLINK\nnv set interface swp1 ip address 10.0.0.1/24", "source": "curated", "command_original": "nv set interface swp1 description UPLINK\nnv set interface swp1 ip address 10.0.0.1/24"}
{"intent": "enable ethernet-1/1 and add subinterface 0 with IP 10.0.0.1/24", "vendor": "Nokia", "os": "srlinux", "category": "Interfaces", "command": "set / interface ethernet-1/1 admin-state enable\nset / interface ethernet-1/1 subinterface 0 ipv4 address 10.0.0.1/24", "source": "curated", "command_original": "set / interface ethernet-1/1 admin-state enable\nset / interface ethernet-1/1 subinterface 0 ipv4 address 10.0.0.1/24"}
{"intent": "add IP address 10.0.0.1/24 to Ethernet0", "vendor": "SONiC", "os": "sonic", "category": "Interfaces", "command": "sudo config interface ip add Ethernet0 10.0.0.1/24", "source": "curated", "command_original": "sudo config interface ip add Ethernet0 10.0.0.1/24"}
{"intent": "add default route with next-hop 10.0.0.2", "vendor": "Cisco", "os": "ios", "category": "Routing", "command": "ip route 0.0.0.0 0.0.0.0 10.0.0.2", "source": "curated", "command_original": "ip route 0.0.0.0 0.0.0.0 10.0.0.2"}
{"intent": "add default route via 10.0.0.2", "vendor": "Arista", "os": "eos", "category": "Routing", "command": "ip route 0.0.0.0/0 10.0.0.2", "source": "curated", "command_original": "ip route 0.0.0.0/0 10.0.0.2"}
{"intent": "add default route via 10.0.0.2", "vendor": "FRR", "os": "frr", "category": "Routing", "command": "ip route 0.0.0.0/0 10.0.0.2", "source": "curated", "command_original": "ip route 0.0.0.0/0 10.0.0.2"}
{"intent": "add static default route next-hop 10.0.0.2", "vendor": "VyOS", "os": "vyos", "category": "Routing", "command": "set protocols static route 0.0.0.0/0 next-hop 10.0.0.2", "source": "curated", "command_original": "set protocols static route 0.0.0.0/0 next-hop 10.0.0.2"}
{"intent": "add default route via 10.0.0.2", "vendor": "Extreme", "os": "exos", "category": "Routing", "command": "configure iproute add default 10.0.0.2", "source": "curated", "command_original": "configure iproute add default 10.0.0.2"}
{"intent": "add static default route gateway 10.0.0.2 on port1", "vendor": "FortiOS", "os": "fortios", "category": "Routing", "command": "config router static\n edit 1\n  set dst 0.0.0.0 0.0.0.0\n  set gateway 10.0.0.2\n  set device port1\n next\nend", "source": "curated", "command_original": "config router static\n edit 1\n  set dst 0.0.0.0 0.0.0.0\n  set gateway 10.0.0.2\n  set device port1\n next\nend"}
{"intent": "add static default route via 10.0.0.2 on ethernet1/1", "vendor": "PAN-OS", "os": "panos", "category": "Routing", "command": "set network virtual-router default routing-table ip static-route DEFAULT destination 0.0.0.0/0 nexthop ip-address 10.0.0.2 interface ethernet1/1", "source": "curated", "command_original": "set network virtual-router default routing-table ip static-route DEFAULT destination 0.0.0.0/0 nexthop ip-address 10.0.0.2 interface ethernet1/1"}
{"intent": "add default route with gateway 10.0.0.2", "vendor": "Mikrotik", "os": "routeros", "category": "Routing", "command": "/ip route add dst-address=0.0.0.0/0 gateway=10.0.0.2", "source": "curated", "command_original": "/ip route add dst-address=0.0.0.0/0 gateway=10.0.0.2"}
{"intent": "add static default route via 10.0.0.2", "vendor": "NVIDIA", "os": "nvue", "category": "Routing", "command": "nv set vrf default router static 0.0.0.0/0 via 10.0.0.2", "source": "curated", "command_original": "nv set vrf default router static 0.0.0.0/0 via 10.0.0.2"}
{"intent": "add static default route using next-hop 10.0.0.2", "vendor": "Nokia", "os": "srlinux", "category": "Routing", "command": "set / network-instance default next-hop-groups group NH nexthop 1 ip-address 10.0.0.2\nset / network-instance default static-routes route 0.0.0.0/0 next-hop-group NH", "source": "curated", "command_original": "set / network-instance default next-hop-groups group NH nexthop 1 ip-address 10.0.0.2\nset / network-instance default static-routes route 0.0.0.0/0 next-hop-group NH"}
{"intent": "add default route with nexthop 10.0.0.2", "vendor": "SONiC", "os": "sonic", "category": "Routing", "command": "sudo config route add prefix 0.0.0.0/0 nexthop 10.0.0.2", "source": "curated", "command_original": "sudo config route add prefix 0.0.0.0/0 nexthop 10.0.0.2"}
{"intent": "create VLAN 10 named USERS", "vendor": "Cisco", "os": "ios", "category": "VLAN", "command": "vlan 10\n name USERS", "source": "curated", "command_original": "vlan 10\n name USERS"}
{"intent": "create VLAN USERS with ID 10", "vendor": "Juniper", "os": "junos", "category": "VLAN", "command": "set vlans USERS vlan-id 10", "source": "curated", "command_original": "set vlans USERS vlan-id 10"}
{"intent": "create VLAN 10 named USERS", "vendor": "Arista", "os": "eos", "category": "VLAN", "command": "vlan 10\n name USERS", "source": "curated", "command_original": "vlan 10\n name USERS"}
{"intent": "create VLAN 10 on eth0 with IP 10.10.10.1/24", "vendor": "VyOS", "os": "vyos", "category": "VLAN", "command": "set interfaces ethernet eth0 vif 10 description USERS\nset interfaces ethernet eth0 vif 10 address 10.10.10.1/24", "source": "curated", "command_original": "set interfaces ethernet eth0 vif 10 description USERS\nset interfaces ethernet eth0 vif 10 address 10.10.10.1/24"}
{"intent": "create VLAN 10 named USERS", "vendor": "Huawei", "os": "vrp", "category": "VLAN", "command": "vlan 10\n name USERS", "source": "curated", "command_original": "vlan 10\n name USERS"}
{"intent": "create VLAN 10 named USERS on bridge", "vendor": "Mikrotik", "os": "routeros", "category": "VLAN", "command": "/interface vlan add name=USERS vlan-id=10 interface=bridge", "source": "curated", "command_original": "/interface vlan add name=USERS vlan-id=10 interface=bridge"}
{"intent": "add VLAN 10 to bridge with IP 10.10.10.1/24", "vendor": "NVIDIA", "os": "nvue", "category": "VLAN", "command": "nv set bridge domain br_default vlan 10\nnv set interface vlan10 ip address 10.10.10.1/24", "source": "curated", "command_original": "nv set bridge domain br_default vlan 10\nnv set interface vlan10 ip address 10.10.10.1/24"}
{"intent": "add VLAN 10 subinterface on ethernet-1/1", "vendor": "Nokia", "os": "srlinux", "category": "VLAN", "command": "set / interface ethernet-1/1 vlan-tagging true\nset / interface ethernet-1/1 subinterface 10 vlan encap single-tagged vlan-id 10", "source": "curated", "command_original": "set / interface ethernet-1/1 vlan-tagging true\nset / interface ethernet-1/1 subinterface 10 vlan encap single-tagged vlan-id 10"}
{"intent": "create VLAN 10", "vendor": "SONiC", "os": "sonic", "category": "VLAN", "command": "sudo config vlan add 10", "source": "curated", "command_original": "sudo config vlan add 10"}
{"intent": "create LACP port-channel 1 in trunk mode with description LAG-UPLINK", "vendor": "Cisco", "os": "ios", "category": "EtherChannel", "command": "interface range GigabitEthernet1/0/1-2\n channel-group 1 mode active\ninterface Port-channel1\n description LAG-UPLINK\n switchport mode trunk", "source": "curated", "command_original": "interface range GigabitEthernet1/0/1-2\n channel-group 1 mode active\ninterface Port-channel1\n description LAG-UPLINK\n switchport mode trunk"}
{"intent": "create LACP port-channel 1 with description LAG-UPLINK", "vendor": "Cisco", "os": "nxos", "category": "EtherChannel", "command": "feature lacp\ninterface Ethernet1/1-2\n channel-group 1 mode active\ninterface port-channel1\n description LAG-UPLINK", "source": "curated", "command_original": "feature lacp\ninterface Ethernet1/1-2\n channel-group 1 mode active\ninterface port-channel1\n description LAG-UPLINK"}
{"intent": "create LACP aggregated ethernet ae0 using ge-0/0/0 and ge-0/0/1", "vendor": "Juniper", "os": "junos", "category": "EtherChannel", "command": "set interfaces ae0 aggregated-ether-options lacp active\nset interfaces ge-0/0/0 ether-options 802.3ad ae0\nset interfaces ge-0/0/1 ether-options 802.3ad ae0", "source": "curated", "command_original": "set interfaces ae0 aggregated-ether-options lacp active\nset interfaces ge-0/0/0 ether-options 802.3ad ae0\nset interfaces ge-0/0/1 ether-options 802.3ad ae0"}
{"intent": "create LACP port-channel 1 with description LAG-UPLINK", "vendor": "Arista", "os": "eos", "category": "EtherChannel", "command": "interface Ethernet1-2\n channel-group 1 mode active\ninterface Port-Channel1\n description LAG-UPLINK", "source": "curated", "command_original": "interface Ethernet1-2\n channel-group 1 mode active\ninterface Port-Channel1\n description LAG-UPLINK"}
{"intent": "create LACP Eth-Trunk1 with description LAG-UPLINK", "vendor": "Huawei", "os": "vrp", "category": "EtherChannel", "command": "interface Eth-Trunk1\n mode lacp-static\n description LAG-UPLINK\ninterface GigabitEthernet0/0/1\n eth-trunk 1", "source": "curated", "command_original": "interface Eth-Trunk1\n mode lacp-static\n description LAG-UPLINK\ninterface GigabitEthernet0/0/1\n eth-trunk 1"}
{"intent": "create bond1 with members swp1 swp2 and MLAG ID 1", "vendor": "NVIDIA", "os": "nvue", "category": "EtherChannel", "command": "nv set interface bond1 bond member swp1,swp2\nnv set interface bond1 bond lacp-bypass on\nnv set interface bond1 bond mlag id 1", "source": "curated", "command_original": "nv set interface bond1 bond member swp1,swp2\nnv set interface bond1 bond lacp-bypass on\nnv set interface bond1 bond mlag id 1"}
{"intent": "enable LACP on lag1 with ethernet-1/1", "vendor": "Nokia", "os": "srlinux", "category": "EtherChannel", "command": "set / interface lag1 admin-state enable\nset / interface lag1 lag lacp admin-state enable\nset / interface ethernet-1/1 ethernet aggregate-id lag1", "source": "curated", "command_original": "set / interface lag1 admin-state enable\nset / interface lag1 lag lacp admin-state enable\nset / interface ethernet-1/1 ethernet aggregate-id lag1"}
{"intent": "create PortChannel0001 and add Ethernet0 member", "vendor": "SONiC", "os": "sonic", "category": "EtherChannel", "command": "sudo config portchannel add PortChannel0001\nsudo config portchannel member add PortChannel0001 Ethernet0", "source": "curated", "command_original": "sudo config portchannel add PortChannel0001\nsudo config portchannel member add PortChannel0001 Ethernet0"}
{"intent": "configure nve1 with bgp host-reachability", "vendor": "Cisco", "os": "nxos", "category": "VXLAN", "command": "feature nv overlay\nfeature vn-segment-vlan-based\ninterface nve1\n no shutdown\n source-interface loopback1\n host-reachability protocol bgp", "source": "curated", "command_original": "feature nv overlay\nfeature vn-segment-vlan-based\ninterface nve1\n no shutdown\n source-interface loopback1\n host-reachability protocol bgp"}
{"intent": "set vtep-source-interface to lo0.0 and route-distinguisher", "vendor": "Juniper", "os": "junos", "category": "VXLAN", "command": "set switch-options vtep-source-interface lo0.0\nset switch-options route-distinguisher 1.1.1.1:1", "source": "curated", "command_original": "set switch-options vtep-source-interface lo0.0\nset switch-options route-distinguisher 1.1.1.1:1"}
{"intent": "configure vxlan1 source Loopback1 for vlan 10", "vendor": "Arista", "os": "eos", "category": "VXLAN", "command": "interface Vxlan1\n vxlan source-interface Loopback1\n vxlan udp-port 4789\n vxlan vlan 10 vni 10010", "source": "curated", "command_original": "interface Vxlan1\n vxlan source-interface Loopback1\n vxlan udp-port 4789\n vxlan vlan 10 vni 10010"}
{"intent": "create vxlan10010 with vni 10010 and local-tunnelip", "vendor": "FRR", "os": "frr", "category": "VXLAN", "command": "interface vxlan10010\n vxlan vni 10010\n vxlan local-tunnelip 1.1.1.1", "source": "curated", "command_original": "interface vxlan10010\n vxlan vni 10010\n vxlan local-tunnelip 1.1.1.1"}
{"intent": "set vxlan source address and enable evpn", "vendor": "NVIDIA", "os": "nvue", "category": "VXLAN", "command": "nv set nve vxlan source address 1.1.1.1\nnv set nve vxlan mac-learning off\nnv set evpn enable on", "source": "curated", "command_original": "nv set nve vxlan source address 1.1.1.1\nnv set nve vxlan mac-learning off\nnv set evpn enable on"}
{"intent": "add vxlan vtep with source 1.1.1.1", "vendor": "SONiC", "os": "sonic", "category": "VXLAN", "command": "sudo config vxlan add vtep 1.1.1.1", "source": "curated", "command_original": "sudo config vxlan add vtep 1.1.1.1"}
{"intent": "create bridged vxlan1 with ingress vni 10010", "vendor": "Nokia", "os": "srlinux", "category": "VXLAN", "command": "set / tunnel-interface vxlan1 vxlan-interface 1 type bridged\nset / tunnel-interface vxlan1 vxlan-interface 1 ingress vni 10010", "source": "curated", "command_original": "set / tunnel-interface vxlan1 vxlan-interface 1 type bridged\nset / tunnel-interface vxlan1 vxlan-interface 1 ingress vni 10010"}
{"intent": "configure evpn vni 10010 with auto rd and rt", "vendor": "Cisco", "os": "nxos", "category": "EVPN", "command": "evpn\n vni 10010 l2\n  rd auto\n  route-target import auto\n  route-target export auto", "source": "curated", "command_original": "evpn\n vni 10010 l2\n  rd auto\n  route-target import auto\n  route-target export auto"}
{"intent": "enable evpn vxlan with vni 10010 in mac-vrf", "vendor": "Juniper", "os": "junos", "category": "EVPN", "command": "set protocols evpn encapsulation vxlan\nset protocols evpn extended-vni-list 10010\nset routing-instances MACVRF instance-type mac-vrf", "source": "curated", "command_original": "set protocols evpn encapsulation vxlan\nset protocols evpn extended-vni-list 10010\nset routing-instances MACVRF instance-type mac-vrf"}
{"intent": "configure bgp evpn for vlan 10 with route-target", "vendor": "Arista", "os": "eos", "category": "EVPN", "command": "router bgp 65001\n address-family evpn\n  neighbor SPINE activate\n vlan 10\n  rd 1.1.1.1:10\n  route-target both 10:10010\n  redistribute learned", "source": "curated", "command_original": "router bgp 65001\n address-family evpn\n  neighbor SPINE activate\n vlan 10\n  rd 1.1.1.1:10\n  route-target both 10:10010\n  redistribute learned"}
{"intent": "activate evpn neighbor and advertise-all-vni", "vendor": "FRR", "os": "frr", "category": "EVPN", "command": "router bgp 65001\n address-family l2vpn evpn\n  neighbor 10.0.0.2 activate\n  advertise-all-vni", "source": "curated", "command_original": "router bgp 65001\n address-family l2vpn evpn\n  neighbor 10.0.0.2 activate\n  advertise-all-vni"}
{"intent": "enable evpn and vxlan flooding", "vendor": "NVIDIA", "os": "nvue", "category": "EVPN", "command": "nv set evpn enable on\nnv set vrf default router bgp address-family l2vpn-evpn enable on\nnv set nve vxlan flooding evpn", "source": "curated", "command_original": "nv set evpn enable on\nnv set vrf default router bgp address-family l2vpn-evpn enable on\nnv set nve vxlan flooding evpn"}
{"intent": "attach vxlan1.1 to bgp-evpn in MACVRF", "vendor": "Nokia", "os": "srlinux", "category": "EVPN", "command": "set / network-instance MACVRF protocols bgp-evpn bgp-instance 1 vxlan-interface vxlan1.1\nset / network-instance MACVRF protocols bgp-evpn bgp-instance 1 evi 10", "source": "curated", "command_original": "set / network-instance MACVRF protocols bgp-evpn bgp-instance 1 vxlan-interface vxlan1.1\nset / network-instance MACVRF protocols bgp-evpn bgp-instance 1 evi 10"}
{"intent": "activate evpn neighbor and advertise-all-vni", "vendor": "SONiC", "os": "sonic", "category": "EVPN", "command": "router bgp 65001\n address-family l2vpn evpn\n  neighbor 10.0.0.2 activate\n  advertise-all-vni", "source": "curated", "command_original": "router bgp 65001\n address-family l2vpn evpn\n  neighbor 10.0.0.2 activate\n  advertise-all-vni"}
{"intent": "configure bfd template and bgp fall-over bfd", "vendor": "Cisco", "os": "ios", "category": "BFD", "command": "bfd-template single-hop FAST\n interval min-tx 300 min-rx 300 multiplier 3\nrouter bgp 65001\n neighbor 10.0.0.2 fall-over bfd", "source": "curated", "command_original": "bfd-template single-hop FAST\n interval min-tx 300 min-rx 300 multiplier 3\nrouter bgp 65001\n neighbor 10.0.0.2 fall-over bfd"}
{"intent": "enable bfd on bgp neighbor 10.0.0.2", "vendor": "Arista", "os": "eos", "category": "BFD", "command": "router bgp 65001\n neighbor 10.0.0.2 bfd", "source": "curated", "command_original": "router bgp 65001\n neighbor 10.0.0.2 bfd"}
{"intent": "configure bfd peer with 300ms intervals multiplier 3", "vendor": "FRR", "os": "frr", "category": "BFD", "command": "router bgp 65001\n neighbor 10.0.0.2 bfd\nbfd\n peer 10.0.0.2\n  detect-multiplier 3\n  receive-interval 300\n  transmit-interval 300", "source": "curated", "command_original": "router bgp 65001\n neighbor 10.0.0.2 bfd\nbfd\n peer 10.0.0.2\n  detect-multiplier 3\n  receive-interval 300\n  transmit-interval 300"}
{"intent": "set rapid-pvst with vlan 10 root primary", "vendor": "Cisco", "os": "nxos", "category": "Spanning-Tree", "command": "spanning-tree mode rapid-pvst\nspanning-tree vlan 10 root primary", "source": "curated", "command_original": "spanning-tree mode rapid-pvst\nspanning-tree vlan 10 root primary"}
{"intent": "set rpvst with vlan 10 priority 4096", "vendor": "Aruba", "os": "aoscx", "category": "Spanning-Tree", "command": "spanning-tree\nspanning-tree mode rpvst\nspanning-tree vlan 10 priority 4096", "source": "curated", "command_original": "spanning-tree\nspanning-tree mode rpvst\nspanning-tree vlan 10 priority 4096"}
{"intent": "create acl DENY-RFC1918 and apply inbound on GigabitEthernet0/0", "vendor": "Cisco", "os": "ios", "category": "Security", "command": "ip access-list extended DENY-RFC1918\n deny ip 10.0.0.0 0.255.255.255 any\n permit ip any any\ninterface GigabitEthernet0/0\n ip access-group DENY-RFC1918 in", "source": "curated", "command_original": "ip access-list extended DENY-RFC1918\n deny ip 10.0.0.0 0.255.255.255 any\n permit ip any any\ninterface GigabitEthernet0/0\n ip access-group DENY-RFC1918 in"}
{"intent": "create filter DENY-RFC1918 and apply input on ge-0/0/0", "vendor": "Juniper", "os": "junos", "category": "Security", "command": "set firewall family inet filter DENY-RFC1918 term T1 from source-address 10.0.0.0/8\nset firewall family inet filter DENY-RFC1918 term T1 then discard\nset firewall family inet filter DENY-RFC1918 term T2 then accept\nset interfaces ge-0/0/0 unit 0 family inet filter input DENY-RFC1918", "source": "curated", "command_original": "set firewall family inet filter DENY-RFC1918 term T1 from source-address 10.0.0.0/8\nset firewall family inet filter DENY-RFC1918 term T1 then discard\nset firewall family inet filter DENY-RFC1918 term T2 then accept\nset interfaces ge-0/0/0 unit 0 family inet filter input DENY-RFC1918"}
{"intent": "create acl DENY-RFC1918 and apply inbound on Ethernet1", "vendor": "Arista", "os": "eos", "category": "Security", "command": "ip access-list DENY-RFC1918\n deny ip 10.0.0.0/8 any\n permit ip any any\ninterface Ethernet1\n ip access-group DENY-RFC1918 in", "source": "curated", "command_original": "ip access-list DENY-RFC1918\n deny ip 10.0.0.0/8 any\n permit ip any any\ninterface Ethernet1\n ip access-group DENY-RFC1918 in"}
{"intent": "create firewall policy DENY-RFC1918 from RFC1918 to any", "vendor": "FortiOS", "os": "fortios", "category": "Security", "command": "config firewall policy\n edit 10\n  set name DENY-RFC1918\n  set srcintf port1\n  set dstintf port2\n  set srcaddr RFC1918\n  set dstaddr all\n  set schedule always\n  set service ALL\n  set action deny\n next\nend", "source": "curated", "command_original": "config firewall policy\n edit 10\n  set name DENY-RFC1918\n  set srcintf port1\n  set dstintf port2\n  set srcaddr RFC1918\n  set dstaddr all\n  set schedule always\n  set service ALL\n  set action deny\n next\nend"}
{"intent": "create security rule DENY-RFC1918 from trust to untrust", "vendor": "PAN-OS", "os": "panos", "category": "Security", "command": "set rulebase security rules DENY-RFC1918 from trust\nset rulebase security rules DENY-RFC1918 to untrust\nset rulebase security rules DENY-RFC1918 source RFC1918\nset rulebase security rules DENY-RFC1918 destination any\nset rulebase security rules DENY-RFC1918 application any\nset rulebase security rules DENY-RFC1918 service any\nset rulebase security rules DENY-RFC1918 action deny", "source": "curated", "command_original": "set rulebase security rules DENY-RFC1918 from trust\nset rulebase security rules DENY-RFC1918 to untrust\nset rulebase security rules DENY-RFC1918 source RFC1918\nset rulebase security rules DENY-RFC1918 destination any\nset rulebase security rules DENY-RFC1918 application any\nset rulebase security rules DENY-RFC1918 service any\nset rulebase security rules DENY-RFC1918 action deny"}
{"intent": "drop forward traffic from 10.0.0.0/8", "vendor": "Mikrotik", "os": "routeros", "category": "Security", "command": "/ip firewall filter add chain=forward src-address=10.0.0.0/8 action=drop comment=DENY-RFC1918", "source": "curated", "command_original": "/ip firewall filter add chain=forward src-address=10.0.0.0/8 action=drop comment=DENY-RFC1918"}
{"intent": "configure ntp server 10.0.0.10 with prefer and Loopback0 source", "vendor": "Cisco", "os": "ios", "category": "System", "command": "ntp server 10.0.0.10 prefer\nntp source Loopback0", "source": "curated", "command_original": "ntp server 10.0.0.10 prefer\nntp source Loopback0"}
{"intent": "add NTP server 10.0.0.10 with iburst", "vendor": "FRR", "os": "frr", "category": "System", "command": "# FRR container uses host chrony\n# /etc/chrony/chrony.conf\nserver 10.0.0.10 iburst", "source": "curated", "command_original": "# FRR container uses host chrony\n# /etc/chrony/chrony.conf\nserver 10.0.0.10 iburst"}
{"intent": "add NTP server 10.0.0.10", "vendor": "VyOS", "os": "vyos", "category": "System", "command": "set system ntp server 10.0.0.10", "source": "curated", "command_original": "set system ntp server 10.0.0.10"}
{"intent": "add NTP unicast server 10.0.0.10", "vendor": "Huawei", "os": "vrp", "category": "System", "command": "ntp-service unicast-server 10.0.0.10", "source": "curated", "command_original": "ntp-service unicast-server 10.0.0.10"}
{"intent": "add NTP server 10.0.0.10 with iburst", "vendor": "NVIDIA", "os": "nvue", "category": "System", "command": "nv set system ntp server 10.0.0.10 iburst on", "source": "curated", "command_original": "nv set system ntp server 10.0.0.10 iburst on"}
{"intent": "add NTP server 10.0.0.10", "vendor": "SONiC", "os": "sonic", "category": "System", "command": "sudo config ntp add 10.0.0.10", "source": "curated", "command_original": "sudo config ntp add 10.0.0.10"}
{"intent": "show IP routing table", "vendor": "Cisco", "os": "ios", "category": "Troubleshooting", "command": "show ip route", "source": "curated", "command_original": "show ip route"}
{"intent": "show routing table", "vendor": "Juniper", "os": "junos", "category": "Troubleshooting", "command": "show route", "source": "curated", "command_original": "show route"}
{"intent": "show IP routing table", "vendor": "Arista", "os": "eos", "category": "Troubleshooting", "command": "show ip route", "source": "curated", "command_original": "show ip route"}
{"intent": "show BGP neighbors", "vendor": "NVIDIA", "os": "nvue", "category": "Troubleshooting", "command": "nv show vrf default router bgp neighbor", "source": "curated", "command_original": "nv show vrf default router bgp neighbor"}
{"intent": "add static IP 10.0.0.1/24 with gateway", "vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "New-NetIPAddress -InterfaceAlias Ethernet -IPAddress 10.0.0.1 -PrefixLength 24 -DefaultGateway 10.0.0.2", "source": "curated", "command_original": "New-NetIPAddress -InterfaceAlias Ethernet -IPAddress 10.0.0.1 -PrefixLength 24 -DefaultGateway 10.0.0.2"}
{"intent": "show full IP configuration", "vendor": "Microsoft", "os": "powershell", "category": "Troubleshooting", "command": "Get-NetIPConfiguration | Format-List", "source": "curated", "command_original": "Get-NetIPConfiguration | Format-List"}
{"intent": "add IP 10.0.0.1/24 to eth0", "vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "ip addr add 10.0.0.1/24 dev eth0\nip link set eth0 up", "source": "curated", "command_original": "ip addr add 10.0.0.1/24 dev eth0\nip link set eth0 up"}
{"intent": "create LACP bond with eth0 and eth1", "vendor": "Linux", "os": "linux", "category": "EtherChannel", "command": "ip link add bond0 type bond mode 802.3ad\nip link set eth0 master bond0\nip link set eth1 master bond0", "source": "curated", "command_original": "ip link add bond0 type bond mode 802.3ad\nip link set eth0 master bond0\nip link set eth1 master bond0"}
{"intent": "capture BGP packets on eth0", "vendor": "Wireshark", "os": "tshark", "category": "Troubleshooting", "command": "tshark -i eth0 -f \"tcp port 179\" -Y bgp -V", "source": "curated", "command_original": "tshark -i eth0 -f \\\"tcp port 179\\\" -Y bgp -V"}
{"intent": "capture VXLAN packets on eth0", "vendor": "Wireshark", "os": "tshark", "category": "VXLAN", "command": "tshark -i eth0 -f \"udp port 4789\" -Y vxlan", "source": "curated", "command_original": "tshark -i eth0 -f \\\"udp port 4789\\\" -Y vxlan"}
{"intent": "apply outside ACL denying 10/8", "vendor": "Cisco", "os": "asa", "category": "Security", "command": "access-list OUTSIDE-IN extended deny ip 10.0.0.0 255.0.0.0 any\naccess-list OUTSIDE-IN extended permit ip any any\naccess-group OUTSIDE-IN in interface outside", "source": "curated", "command_original": "access-list OUTSIDE-IN extended deny ip 10.0.0.0 255.0.0.0 any\naccess-list OUTSIDE-IN extended permit ip any any\naccess-group OUTSIDE-IN in interface outside"}
{"intent": "create periodic YANG push subscription", "vendor": "Cisco", "os": "iosxe", "category": "Telemetry", "command": "telemetry ietf subscription 1\n encoding encode-kvgpb\n source-address 1.1.1.1\n stream yang-push\n update-policy periodic 3000", "source": "curated", "command_original": "telemetry ietf subscription 1\n encoding encode-kvgpb\n source-address 1.1.1.1\n stream yang-push\n update-policy periodic 3000"}
{"intent": "enable gNMI with SSL profile", "vendor": "Arista", "os": "eos", "category": "Telemetry", "command": "management api gnmi\n transport grpc default\n  ssl profile DEMO\nprovider eos-native", "source": "curated", "command_original": "management api gnmi\n transport grpc default\n  ssl profile DEMO\nprovider eos-native"}
{"intent": "enable gNMI server on port 57400", "vendor": "Nokia", "os": "srlinux", "category": "Telemetry", "command": "set / system grpc-server mgmt admin-state enable\nset / system grpc-server mgmt port 57400\nset / system grpc-server mgmt services [ gnmi ]", "source": "curated", "command_original": "set / system grpc-server mgmt admin-state enable\nset / system grpc-server mgmt port 57400\nset / system grpc-server mgmt services [ gnmi ]"}
{"intent": "configure gNMI server on localhost port 9339", "vendor": "NVIDIA", "os": "nvue", "category": "Telemetry", "command": "nv set system gnmi-server listening-address localhost\nnv set system gnmi-server port 9339", "source": "curated", "command_original": "nv set system gnmi-server listening-address localhost\nnv set system gnmi-server port 9339"}