{"vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "configure access-list Edge_Security_Policy_24 vlan Vlan-ID-240 ingress", "intent": "on-call request: need to apply ACL Edge_Security_Policy_24 to vlan 240 ingress; CLI only, pls", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Arista", "os": "eos", "category": "BGP", "command": "show ipv6 bgp peers addr ROUTE regexp as_paths [VRF_INST]", "intent": "on-call request: what is the CLI check for IPv6 BGP peers with AS path regex?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Nokia", "os": "srlinux", "category": "Routing", "command": "set network-instance default static-routes route 172.16.125.0/24 next-hop 10.1.1.125", "intent": "on-call request: change ticket: introduce static route 172.16.125.0/24 via 10.1.1.125", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "NVIDIA", "os": "nvue", "category": "OSPF", "command": "nv set vrfs default router ospf area 0.0.0.0 member swp13", "intent": "handoff check: we need swp13 to ospf area 0.0.0.0 added on this box", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Aruba", "os": "aoscx", "category": "Protocols", "command": "router ospf 1", "intent": "handoff check: need to enter ospf process 1 configuration; CLI only, pls", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "FRR", "os": "frr", "category": "System", "command": "babel <wired|wireless>", "intent": "handoff check: ticket asks for babel interface type; give me the CLI", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetIPInterface -InterfaceAlias \"Ethernet 1\" -AddressFamily IPv4 -Dhcp Enabled", "intent": "handoff check: activate dhcp on ethernet 1 ipv4, what should I type?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "VyOS", "os": "vyos", "category": "ISIS", "command": "set protocols isis ldp-sync", "intent": "on the edge box, turn on ISIS LDP synchronization; need the actual syntax", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Mikrotik", "os": "routeros", "category": "VLAN", "command": "/ip address add address=192.168.27.1/24 interface=vlan-270 network=192.168.27.0", "intent": "on the edge box, provision IP address to vlan-270 interface for the lab, syntax pls", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Linux", "os": "linux", "category": "System", "command": "ip netns add netns_37", "intent": "on the edge box, provision network namespace netns_37, CLI only please", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Juniper", "os": "junos", "category": "HA", "command": "set interfaces ge-0/0/4 unit 0 family inet address 10.4.1.2/24 vrrp-group 4 preempt", "intent": "on the edge box, help me provision VRRP group 4 with preempt on ge-0/0/4 on this box", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Cisco", "os": "ios", "category": "VLAN", "command": "hostname Core", "intent": "quick one for the shift: need hostname to Core applied; what do I type?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Nokia", "os": "srlinux", "category": "DHCP", "command": "set interface description subinterface type ipv4 admin-state dhcp-server admin-state", "intent": "quick one for the shift: we want DHCP server on subinterface active on this box", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetIPInterface -InterfaceAlias \"LAN 3\" -AddressFamily IPv4 -Dhcp Enabled", "intent": "quick one for the shift: switch DHCP on LAN 3 IPv4 on for the lab test", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i wlan1 -f \"udp port 67\"", "intent": "quick one for the shift: get a trace of UDP port 67 on wlan1 for troubleshooting", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Juniper", "os": "junos", "category": "System", "command": "request system software inservice-upgrade (Maintenance)", "intent": "before the change window, how do I perform inservice software upgrade on this box?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Huawei", "os": "vrp", "category": "Routing", "command": "ip route-static 172.16.19.0 255.255.255.0 10.255.1.19", "intent": "before the change window, provision static route 172.16.19.0/24 for the lab, syntax pls", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Cisco", "os": "ios", "category": "Troubleshooting", "command": "collect transport responder port", "intent": "before the change window, ticket asks for netflow transport responder port; give me the CLI", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Cisco", "os": "ios", "category": "Protocols", "command": "clear ss7 sm-stats", "intent": "before the change window, reset ss7 sm statistics for troubleshooting", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Extreme", "os": "exos", "category": "HA", "command": "configure mlag peer MLAG_Virtual_Peer_2 ipaddress 10.255.250.2", "intent": "noc ticket: need to put MLAG peer 2 IP address in place; give me the CLI", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Nokia", "os": "srlinux", "category": "BGP", "command": "set interface description subinterface type ipv6 admin-state neighbor-discovery", "intent": "noc ticket: how do I wire up ipv6 neighbor-discovery on subinterface?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "ip addr add 192.168.114.10/24 dev eth2", "intent": "noc ticket: how do I bring in IP 192.168.114.10/24 to eth2?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Linux", "os": "linux", "category": "Security", "command": "iptables -A FORWARD -s 192.168.13.0/24 -d 10.0.0.13 -j ACCEPT", "intent": "need a CLI snippet: how do I accept forward from 192.168.13.0/24 to 10.0.0.13 on this box?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"arp\" -w /tmp/capture_lo_arp.pcapng", "intent": "need a CLI snippet: grab a packet trace for ARP packets on lo to pcapng", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i wlan1 -f \"arp\" -w /tmp/capture_wlan1_arp.pcapng", "intent": "need a CLI snippet: get a trace of arp on wlan1 to pcapng for troubleshooting", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "NVIDIA", "os": "nvue", "category": "VLAN", "command": "nv set bridge domain default vlan 510 description Vlan-Segment-ID-510", "intent": "lab rehearsal: need vlan 510 description on default bridge applied; what do I type?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Aruba", "os": "aoscx", "category": "Routing", "command": "ip route 172.16.83.0/24 10.255.1.83", "intent": "lab rehearsal: provision static route for 172.16.83.0/24 via 10.255.1.83 for the lab, syntax pls", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "FRR", "os": "frr", "category": "System", "command": "show ip ospf interface [INTERFACE] [json]", "intent": "lab rehearsal: trying to troubleshoot OSPF interface details; need the status output", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Juniper", "os": "junos", "category": "Troubleshooting", "command": "show log all-messages | last 10", "intent": "lab rehearsal: pull up last 10 lines of all messages log for the handoff please", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Add-DhcpServerv4Scope -Name \"Scope-Net-38\" -StartRange 192.168.38.100 -EndRange 192.168.38.200 -SubnetMask 255.255.255.0", "intent": "ops check, spin up DHCP scope for 192.168.38.0/24 in the lab", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "NVIDIA", "os": "nvue", "category": "VLAN", "command": "nv set bridge domain default vlan 440 untagged member interface swp44", "intent": "ops check, how do I bring in swp44 as untagged member of VLAN 440?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface swp19 ip address 10.19.1.1/24", "intent": "ops check, help me assign IP address 10.19.1.1/24 to swp19 in the lab", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetIPInterface -InterfaceAlias \"LAN 3\" -AddressFamily IPv4", "intent": "can you help here: I need to see IPv4 settings for LAN 3 interface; what is the check?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"port 67\" -w /tmp/capture_lo_port_67.pcapng", "intent": "can you help here: grab a packet trace for dhcp traffic on loopback to pcap", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Juniper", "os": "junos", "category": "System", "command": "configure command:", "intent": "can you help here: handoff task is to enter configuration mode with command; what do I run?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Cisco", "os": "ios", "category": "Security", "command": "crypto pki profile enrollment", "intent": "can you help here: help me provision pki enrollment profile on this box", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Mikrotik", "os": "routeros", "category": "ACL", "command": "/ip firewall filter add chain=forward action=drop src-address=192.168.140.0/24 comment=\"Filter rules for subnet 140\"", "intent": "on-call request: we need forward chain filter to drop subnet added on this box", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i wlan1 -f \"port 162\" -w /tmp/capture_wlan1_port_162.pcapng", "intent": "on-call request: packet capture request: snmp trap traffic on wlan1", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Mikrotik", "os": "routeros", "category": "DHCP", "command": "/ip pool add name=dhcp-pool-83 ranges=192.168.83.10-192.168.83.100", "intent": "on-call request: can you build dhcp pool 192.168.83.10-192.168.83.100 on this box?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Get-DhcpServerv4Scope -ScopeId 192.168.15.0", "intent": "handoff check: I need visibility into DHCPv4 scopes for 192.168.15.0; give me the check, not a config change", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Get-NetIPAddress -InterfaceAlias \"Ethernet 76\"", "intent": "handoff check: what do I run to inspect ip addresses on Ethernet 76?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "ip link add link eth0 name eth0.58 type vlan id 58", "intent": "handoff check: provision vlan 58 subinterface on eth0, CLI only please", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "New-NetIPAddress -InterfaceAlias \"Ethernet 37\" -IPAddress 192.168.37.10 -PrefixLength 24 -DefaultGateway 192.168.37.1", "intent": "handoff check: change ticket: introduce ip address to Ethernet 37 interface", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "FRR", "os": "frr", "category": "System", "command": "show ip igmp [vrf NAME] join [json]", "intent": "on the edge box, where can I check ip igmp joins from the terminal?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Cisco", "os": "ios", "category": "VLAN", "command": "show vlan id 1-4,3,7,5-20", "intent": "on the edge box, need a quick look at specific vlan ids, no changes", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Linux", "os": "linux", "category": "Interfaces", "command": "tcpdump -i any -n -w /tmp/dump_45.pcap \"ip host 192.168.45.1\"", "intent": "on the edge box, packet capture request: host 192.168.45.1 to pcap", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Wireshark", "os": "tshark", "category": "Protocols", "command": "udp.port == 145", "intent": "on the edge box, pull up UDP port 145 without changing anything", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Arista", "os": "eos", "category": "BGP", "command": "show ip bgp vrf [vrf_name | all | default]", "intent": "quick one for the shift: I need visibility into BGP for specific VRF; give me the check, not a config change", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i docker0 -f \"port 443\"", "intent": "quick one for the shift: grab a packet trace for HTTPS traffic on docker0", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "SONiC", "os": "sonic", "category": "SNMP", "command": "config snmp user add/del", "intent": "quick one for the shift: change request is for SNMP user add or delete; need the syntax", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "VyOS", "os": "vyos", "category": "System", "command": "force vrf <name>", "intent": "quick one for the shift: help me force specific VRF context in the lab", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "FRR", "os": "frr", "category": "EVPN", "command": "show evpn es-evi [vni (1-16777215)] [detail] [json]", "intent": "before the change window, where can I check evpn ethernet-segment evi for specific vni from the terminal?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Cisco", "os": "ios", "category": "Security", "command": "match invalid-command", "intent": "before the change window, need to match invalid command in route map; CLI only, pls", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Remove-NetRoute -DestinationPrefix 10.0.107.0/24 -Confirm:$false", "intent": "before the change window, remove the existing route to 10.0.107.0/24; CLI only", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "PAN-OS", "os": "panos", "category": "Logging", "command": "set shared log-settings syslog Syslog_Profile server Syslog_Server15 server 192.168.10.15 port 514", "intent": "before the change window, help me provision syslog server 192.168.10.15 on this box", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "NVIDIA", "os": "nvue", "category": "Routing", "command": "nv set vrfs default router static route 172.16.12.0/24 via 10.255.0.2", "intent": "noc ticket: we need static route 172.16.12.0/24 via 10.255.0.2 added on this box", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Juniper", "os": "junos", "category": "BGP", "command": "set policy-options policy-statement EXPORT-BGP-POLICY-9 term Matchterm then metric 50", "intent": "noc ticket: change policy term then metric to 50 for the lab run", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Huawei", "os": "vrp", "category": "VLAN", "command": "header shell \"Unauthorized access is prohibited on Huawei router!\"", "intent": "noc ticket: ticket asks for shell login banner message; give me the CLI", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Microsoft", "os": "powershell", "category": "Protocols", "command": "Resolve-DnsName -Name \"domain-node28.internal.lan\" -Type A", "intent": "noc ticket: help me resolve dns name to A record in the lab", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "VyOS", "os": "vyos", "category": "System", "command": "set load-balancing haproxy timeout check <seconds>", "intent": "need a CLI snippet: need HAProxy check timeout in seconds applied; what do I type?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i lo -f \"port 53\"", "intent": "need a CLI snippet: grab a packet trace for DNS traffic on loopback", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Arista", "os": "eos", "category": "Multicast", "command": "register checksum [full | header]", "intent": "need a CLI snippet: change request is for register checksum full; need the syntax", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "SONiC", "os": "sonic", "category": "System", "command": "config console enable", "intent": "need a CLI snippet: activate console port, what should I type?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Nokia", "os": "sros", "category": "Misc", "command": "enable-admin", "intent": "lab rehearsal: turn on admin user; need the actual syntax", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure mlag peer MLAG_Virtual_Peer_14 member port 1:14", "intent": "lab rehearsal: provision port 1:14 to mlag peer for the lab, syntax pls", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Arista", "os": "eos", "category": "System", "command": "show rib route ipv6 [vrf vrf_name] [PREFIX][ROUTE TYPE]", "intent": "lab rehearsal: trying to troubleshoot rib ipv6 routes; need the status output", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "NVIDIA", "os": "nvue", "category": "Interfaces", "command": "nv set interface vlan350 ip address 192.168.35.1/24", "intent": "lab rehearsal: help me assign IP address 192.168.35.1/24 to VLAN 350 in the lab", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Linux", "os": "linux", "category": "Protocols", "command": "ping -c 5 -i 0.2 -s 1472 192.168.11.1", "intent": "ops check, how do I ping 192.168.11.1 with 1472 byte packets on this box?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Arista", "os": "eos", "category": "Routing", "command": "fast-reroute ti-lfa srlg [strict]", "intent": "ops check, we want TI-LFA SRLG strict fast reroute active on this box", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Juniper", "os": "junos", "category": "Firewall", "command": "show security idp jist-packageversion", "intent": "ops check, what is the CLI check for IDP JIST package version?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetIPInterface -InterfaceAlias \"Wi-Fi 17\" -AddressFamily IPv4 -Dhcp Enabled", "intent": "ops check, activate DHCP on Wi-Fi interface, what should I type?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Arista", "os": "eos", "category": "System", "command": "delay seconds", "intent": "can you help here: how do I delay execution by seconds on this box?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Arista", "os": "eos", "category": "SNMP", "command": "show snmp user [USER_LIST]", "intent": "can you help here: what do I run to inspect SNMP users?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Arista", "os": "eos", "category": "BGP", "command": "router bgp num", "intent": "can you help here: handoff task is to enter BGP router configuration; what do I run?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Extreme", "os": "exos", "category": "Interfaces", "command": "configure ports 5:3 duplex full", "intent": "can you help here: make port 5:3 to full duplex take effect here", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "SONiC", "os": "sonic", "category": "SNMP", "command": "show runningconfiguration snmp community", "intent": "on-call request: where can I check SNMP community configuration from the terminal?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i any -f \"port 68\" -w /tmp/capture_any_port_68.pcapng", "intent": "on-call request: grab a packet trace for DHCP traffic on any interface to file", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Extreme", "os": "exos", "category": "VLAN", "command": "enable iprouting vlan Vlan-ID-460", "intent": "on-call request: switch IP routing on VLAN 460 on for the lab test", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "SONiC", "os": "sonic", "category": "Troubleshooting", "command": "show snmpagentaddress", "intent": "on-call request: grab the current view of SNMP agent listening addresses for me", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i br0 -f \"port 162\" -w /tmp/capture_br0_port_162.pcapng", "intent": "handoff check: need packets for port 162 on bridge br0; what is the capture line?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Linux", "os": "linux", "category": "Protocols", "command": "ip rule del from 192.168.52.0/24 table 152", "intent": "handoff check: we no longer need ip rule for 192.168.52.0/24 table 152; how do I take it out?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Mikrotik", "os": "routeros", "category": "ACL", "command": "/ip firewall filter add chain=forward action=accept src-address=192.168.76.0/24 comment=\"Filter rules for subnet 76\"", "intent": "handoff check: how do I bring in forward chain rule for 192.168.76.0/24?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Nokia", "os": "srlinux", "category": "EVPN", "command": "set network-instance vrf-cust-2 type ip-vrf admin-state enable", "intent": "handoff check: can you build ip vrf vrf-cust-2 on this box?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Wireshark", "os": "tshark", "category": "Interfaces", "command": "tshark -i en1 -f \"port 67\" -w /tmp/capture_en1_port_67.pcapng", "intent": "on the edge box, need packets for DHCP traffic on en1 to pcapng; what is the capture line?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Mikrotik", "os": "routeros", "category": "VLAN", "command": "/interface vlan add name=vlan-460 vlan-id=460 interface=bridge-vlan-1", "intent": "on the edge box, spin up VLAN 460 on bridge-vlan-1 in the lab", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Juniper", "os": "junos", "category": "BGP", "command": "show route protocol bgp terse | match 10\\.| 192.168| 172.16.*.*/*", "intent": "on the edge box, what is the CLI check for BGP routes for 10. 192.168 and 172.16?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "Microsoft", "os": "powershell", "category": "Interfaces", "command": "Set-NetAdapter -Name \"Management 37\" -MtuSize 6500", "intent": "on the edge box, make Management 37 MTU to 6500 take effect here", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}
{"vendor": "PAN-OS", "os": "panos", "category": "System", "command": "set mgt-config users operator-20 permissions role-based superuser yes", "intent": "quick one for the shift: how do I grant superuser role to operator-20 on this box?", "source": "corpus", "intent_origin": "synthetic-authored-grammar-v2", "command_origin": "verbatim-multivendor-cli-commands", "split": "operator_test"}