Changelog --------- 6.1.17 (2026-07-24) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for an optional ``demo_recorder_cfg_entry_point`` Gym registry entry in demonstration collection. Fixed ^^^^^ * Fixed simulator tests and examples to use the available legacy Franka Panda USD asset. 6.1.16 (2026-07-14) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed docker installs deleting ``pillow`` from Isaac Sim's ``omni.kit.pip_archive`` prebundle by relaxing the exact ``pillow==12.2.0`` pin to a ``>=12.1.1`` floor. An exact pin below the version prebundled by a future Isaac Sim base image forces a downgrade that deletes the prebundled copy, dangling the per-file symlink farm on aarch64 and breaking extension startup. 6.1.15 (2026-07-11) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added a fail-loud post-install check that aborts installation when pip operations leave a prebundled Isaac Sim package with a dangling ``__init__.py`` (other new dangling symlinks are reported as warnings). * Fixed the ``isaacsim.robot_motion.pink`` extension failing to load after installation by moving the ``pin-pink`` pin from ``3.1.0`` to ``3.3.0``, which provides ``pink.exceptions.NoSolutionFound`` while staying below the pink 3.4 task-API break. Environments installed manually should update with ``pip install pin-pink==3.3.0``. 6.1.14 (2026-06-30) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed a crash (``undefined symbol: ncclDevCommCreate``) when launching the Isaac Sim streaming app (e.g. ``isaac-sim.streaming.sh`` / ``runheadless.sh``) from an Isaac Lab install against Isaac Sim 6.0. Isaac Sim's deprecated ``omni.isaac.ml_archive`` prebundle ships its own PyTorch and NCCL while Isaac Lab installs a different pinned PyTorch; on launch paths that do not import Isaac Lab (which otherwise deprioritizes the prebundle on ``sys.path``), the two NCCL copies collide and the prebundled torch binds to the wrong one. The install step that repoints the prebundle to the active environment now uses overlayfs-safe filesystem operations, so it works inside the Docker image build (where it previously failed silently with ``EXDEV`` / ``EINVAL``) and fails loudly if a shadowing copy remains. 6.1.13 (2026-06-29) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updated the Isaac Sim pip dependency to ``6.0.1.0`` and aligned the ``pillow`` dependency with Isaac Sim by pinning ``pillow==12.2.0``. 6.1.12 (2026-06-18) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed Linux ARM installation by pre-installing ``nlopt==2.6.2`` before Isaac Lab dependencies are resolved, and by keeping ``swig`` available in Docker only until dependency installation completes. 6.1.11 (2026-06-16) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :func:`~isaaclab.sim.utils.newton_model_utils.replace_newton_shape_colors` incorrectly keeping Newton's random palette colors for environments 1–N when USD cloning is skipped Shape labels for non-source environments now resolve to the clone-plan source prim so the correct USD material color is applied to all environments. 6.1.10 (2026-06-14) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updated the ``newton`` extra installation message to list the Newton GL viewer's ``pyglet`` dependency. Fixed ^^^^^ * Fixed SimulationContext reset ordering so initial visualizers are created before the timeline play event pump can invalidate freshly created PhysX tensor views. * Fixed Pink IK USD-to-URDF conversion to use Isaac Sim's URDF exporter instead of the unavailable ``nvidia.srl`` package. 6.1.9 (2026-06-13) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Prevented MARL adapter wrappers from raising destructor tracebacks when destroyed by setting their environment lifecycle state explicitly. 6.1.8 (2026-06-12) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed OVRTX-backed Newton scenes to keep USD cloning enabled and preserve env-local camera transforms in heterogeneous clone plans. 6.1.7 (2026-06-11) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed LEAPP export of :func:`isaaclab.envs.mdp.projected_gravity` to expose root orientation as the graph input and compute projected gravity inside the exported graph. * Fixed a quaternion convention bug in :class:`~isaaclab.controllers.rmp_flow.RmpFlowController` where the end-effector orientation target was re-converted to ``(x, y, z, w)`` even though IsaacLab quaternions are already in that order. The spurious conversion scrambled the target orientation handed to RMPFlow, causing the arm to drift away from its commanded pose (e.g. the Agibot RMPFlow place tasks no longer hold their reset pose under a zero relative command). * Guarded asset and sensor destructors against Python interpreter shutdown so callback cleanup does not touch lazy imports after import machinery is torn down. * Fixed :func:`isaaclab.utils.string.string_to_callable` to validate lambda expression strings before evaluating them and to evaluate them without Python builtins. 6.1.6 (2026-06-10) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the ``isaaclab.python.kit`` GUI experience failing to start with a Kit dependency-solver error on Isaac Sim builds that do not ship ``isaacsim.robot.experimental.wheeled_robots`` or ``isaacsim.robot.wheeled_robots.nodes``. These extensions are not imported by Isaac Lab and are now declared optional, so the experience loads regardless of the Isaac Sim build. * Fixed livestream launch handling to reject Isaac Sim full-app experiences that depend on ``isaacsim.exp.full`` and to ensure Kit-backed examples open a Kit visualizer by default when needed. 6.1.5 (2026-06-09) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed ``isaaclab`` install metadata to include ``isaaclab_ppisp`` as a peer extension. * Fixed local asset retrieval for MDL files that import sibling MDL modules, such as Hospital materials importing OmniUe4 modules. * Prevented environment destructors from emitting cleanup tracebacks after Python import shutdown begins. * Fixed :func:`~isaaclab.controllers.utils.import_lula` failing to locate the ``lula`` module on pip-based Isaac Sim installs by extending :func:`~isaaclab.controllers.utils.find_lula_prebundle_dir` to also search the ``extscache/-`` and ``extsDeprecated/`` layouts used by pip installs (the Isaac Sim 6.0 pip packages ship ``isaacsim.robot_motion.lula`` under ``extsDeprecated``, where the Kit resolver reports it as unavailable), in addition to the ``exts/`` layout used by binary installs. :func:`~isaaclab.controllers.utils.import_lula` now adds the prebundle to ``sys.path`` before attempting to enable the Kit extension, avoiding a spurious ``Failed to resolve extension dependencies`` error logged when Kit tries to enable the deprecated ``isaacsim.robot_motion.lula`` extension even though ``lula`` itself loads correctly. When ``lula`` still cannot be found, a clear, actionable :class:`ModuleNotFoundError` is raised instead of the bare import error. 6.1.4 (2026-06-08) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a scene-data backend hook for active ``InteractiveScene`` access so backends can source scene-owned entity transforms without relying on global rigid-body views, and visualizers can discover scene-owned contact sensors. Changed ^^^^^^^ * Clarified ``--video`` behavior when multiple video-capable visualizers are active: Gymnasium video recording captures one ``env.render()`` stream, with Kit taking priority over Newton. * Updated the visualizer tiled camera tutorial to show generated Kit cameras and existing Newton robot-mounted camera streams with matching documentation figures. Fixed ^^^^^ * Improved visualizer tiled-camera errors when ``tiled_cam_prim_path`` is set but the scene has no Isaac Lab ``Camera`` sensors, and clarified the camera-mode documentation for Cartpole camera tasks. * Fixed remote asset mirroring to include textures referenced by downloaded MDL materials. 6.1.3 (2026-06-07) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed a memory leak in :meth:`~isaaclab.envs.ManagerBasedEnv.close`, :meth:`~isaaclab.envs.DirectRLEnv.close` and :meth:`~isaaclab.envs.DirectMARLEnv.close` where the cached observation buffers and the :class:`gym.spaces` observation/action spaces were never released, causing host and GPU memory to accumulate on each environment construct/teardown cycle. * Fixed the ``create_cube_base_env`` tutorial crashing at startup with a ``RuntimeError`` because its prestartup USD-level randomization terms ran while scene replication was enabled. 6.1.2 (2026-06-06) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed :class:`~isaaclab.controllers.rmp_flow.RmpFlowController` to load RMPFlow directly from the ``lula`` library on every backend, instead of going through the Isaac Sim Kit motion-generation extension. ``lula`` is importable both under Kit and kitless (e.g. the Newton visualizer), giving a single code path. The ``rmp_flow_smoothed`` variant is now available in both modes as well. Removed ^^^^^^^ * Removed obsolete ``scripts/tools/wrap_warp_to_torch.py`` migration helper. Use :attr:`~isaaclab.utils.warp.ProxyArray.torch` when tensor interop is needed. Fixed ^^^^^ * Fixed missing :mod:`isaaclab.cloner` lazy exports for clone-plan source resolution. 6.1.1 (2026-06-05) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed compliant-contact USD spawning to use :class:`~isaaclab_physx.sim.spawners.materials.PhysxRigidBodyMaterialCfg` instead of the deprecated rigid-body material alias. 6.1.0 (2026-06-02) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.sim.ServiceLocator` and exposed it as :attr:`~isaaclab.sim.SimulationContext.services`. Backend-specific caches can be registered and retrieved using subscript syntax (``services[cls] = instance``, ``services[cls]``). Services with a ``close()`` method are automatically closed on ``clear_instance()``. * Added :class:`~isaaclab.sensors.camera.CameraISPMode` (values ``AUTO_CAMERA`` and ``AUTO_ANY``) and the :attr:`~isaaclab.sensors.camera.CameraCfg.isp_cfg` field to author or auto-discover an ISP cfg (:class:`~isaaclab_ppisp.PpispCfg`) from a USD ``RenderProduct`` bound to the camera (or anywhere on the stage as a fallback). * Added :attr:`~isaaclab.renderers.RenderBufferKind.RGB_HDR` to the renderer output contract so backends can advertise a 3-channel float HDR AOV. * Added :meth:`~isaaclab.renderers.BaseRenderer.prepare_cameras` hook so backends can author per-camera USD overrides. * Added :class:`~isaaclab.renderers.CameraRenderSpec`, an immutable description of a tiled camera passed to render backends so they no longer hold a reference to the camera sensor instance. * Added shared visualizer defaults for CLI-created visualizer configs. * Auto-install ``libgl1-mesa-dev``, ``libopengl-dev``, ``libglx-dev``, ``libx11-dev``, ``libxcursor-dev``, ``libxi-dev``, ``libxinerama-dev``, and ``libxrandr-dev`` on ARM when sudo is available, so ``./isaaclab.sh -i`` can build ``imgui-bundle`` from source without a separate provisioning step. * Added :func:`~isaaclab.utils.string.compile_template_pattern` to compile a slotted template (with ``{}`` slots expanding to a caller-provided regex fragment) into a regular expression. * Added :func:`~isaaclab.utils.string.strip_templated_prefix` to strip a templated prefix (with ``{}`` slots matching one path segment each) from a string and return the remainder. * Added multi-GPU troubleshooting documentation describing the NCCL hang that can occur when ``CUDA_VISIBLE_DEVICES`` selects a subset of a node's GPUs, including the ``NCCL_P2P_DISABLE=1`` workaround and an explanation of why it is not needed when all GPUs are visible. Changed ^^^^^^^ * Updated the ``usd-core`` dependency to 25.11.0 to match Kit 110.1.1. * Renamed the ``./isaaclab.sh -i none`` core-only install selector to ``./isaaclab.sh -i core`` for clarity (the install still ships the core submodules, so ``"core"`` describes the result better than ``"none"``). * Updated shared visualizer tiled camera defaults for the visualizer integration test coverage. * ``./isaaclab.sh -i mimic`` now also installs ``isaaclab_teleop`` as an editable submodule, since :mod:`isaaclab_mimic` declares it as a required dependency. * Updated installation, quickstart, and pip documentation to match ``./isaaclab.sh -i`` install tokens and pip wheel extras. * Regenerated the environments overview table from task configuration metadata. Fixed ^^^^^ * Fixed visualizer tiled camera defaults and camera pose helpers so tiled camera views remain opt-in and respect selected environment ids. * Fixed ``scripts/tutorials/01_assets/add_new_robot.py`` failing at the Jetbot velocity-target setter when the action was a CPU ``torch.Tensor``. The tutorial now allocates the wheel-velocity templates on ``sim.device`` and uses :meth:`~isaaclab.assets.BaseArticulation.set_joint_velocity_target_index`. * Fixed lazy-eval sensors (contact, IMU, PVA, joint-wrench across PhysX and Newton) returning stale pre-reset data when :meth:`~isaaclab.scene.InteractiveScene.reset` was called inside an environment step without a subsequent physics step (e.g. inside :meth:`~isaaclab.envs.ManagerBasedRLEnv._reset_idx`). Each step-dependent sensor's update kernel now skips envs whose ``timestamp`` is still ``0`` (the signal that no physics step has occurred since the last reset), so the next ``data`` access returns the values that the sensor's ``reset()`` populated rather than re-reading a physics buffer that holds pre-reset values. * Fixed ``--viz none`` parsing to use the internal disable-all sentinel. * Fixed Kit launches hiding Isaac Lab Python ``INFO`` logs, including joint wrench sensor initialization messages. * Restricted the ``pytetwild`` install requirement to x86_64 platforms. PyPI ships no aarch64 wheel and the sdist build fails on ARM (``-m64`` hardcoded in CMake), which broke the ARM64 docker image build. Tetrahedralization of volume deformables now degrades gracefully on ARM64 with the existing "install pytetwild" message instead of failing the install outright. * Made ``./isaaclab.sh -i`` skip the ARM-only swig auto-install when ``sudo`` is unavailable instead of crashing with a ``FileNotFoundError``. Users on locked-down ARM containers can now run the install and pre-provision swig themselves if they need to build nlopt from source. * Fixed Hydra space deserialization for direct MARL environment configs so per-agent observation and action spaces remain populated for skrl multi-agent wrappers. * Fixed Newton replicated-scene cloning so source clone plans are available before sensor construction and asset USD replication is skipped for Newton physics replication. * Fixed :class:`~isaaclab.sim.converters.MjcfConverter` to enable the Isaac Sim MJCF importer extension before importing MJCF assets. * Fixed module-import-time ``from pxr import …`` in :mod:`isaaclab.sim.simulation_context`, :mod:`isaaclab.assets.asset_base`, :mod:`isaaclab.scene.interactive_scene`, :mod:`isaaclab.sim.spawners.from_files.from_files`, :mod:`isaaclab.sim.utils.prims`, :mod:`isaaclab.sim.utils.queries`, :mod:`isaaclab.sim.utils.semantics`, :mod:`isaaclab.sim.utils.stage`, and :mod:`isaaclab.sim.utils.transforms`. Previously, ``from isaaclab.assets import Articulation`` or ``from isaaclab.sim import SimulationContext`` forced ``pxr`` (USD) into ``sys.modules`` before :class:`~isaaclab.app.AppLauncher`, which broke Kit's USD binding registration with a cascade of ``TfNotice`` / ``UsdAPISchemaBase`` / ``GfVec3f`` converter errors during ``SimulationApp.startup``. Kit-less env-cfg parsing followed by ``--visualizer kit`` now succeeds without any pxr modules preloaded. Type hints stay under ``TYPE_CHECKING``; where pxr is used at runtime, the ``from pxr import …`` is deferred into the function body that needs it. * Fixed ignored shutdown traceback from environment destructors when Python import machinery has already finalized. * Fixed the pip wheel build so that extensions promoted to top-level packages (e.g. ``isaaclab_assets``, ``isaaclab_tasks``, ``isaaclab_rl``) keep their ``config/extension.toml`` under ``isaaclab/source/`` where the bundled Kit experience files search for them. Without this, launching a Kit app from the wheel failed during dependency resolution with ``isaaclab_assets ... (none found)`` before the simulator started. 6.0.0 (2026-05-20) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :func:`~isaaclab.sim.schemas.define_actuator_properties` to author ``NewtonActuator`` USD prims from IsaacLab actuator configs. Lives alongside the other ``define_*_properties`` schema writers and is invoked from the schema-side post-spawn hook below. * Added :meth:`~isaaclab.assets.AssetBaseCfg._post_spawn` hook (no-op by default) invoked by :class:`~isaaclab.assets.AssetBase` after spawning the asset. :class:`~isaaclab.assets.ArticulationCfg` overrides it to author Newton-native actuator prims from :attr:`~isaaclab.assets.ArticulationCfg.actuators`. * Added common deformable property and material base cfgs in :mod:`isaaclab.sim`. * Added backend-neutral deformable asset APIs, including :class:`~isaaclab.assets.DeformableObject`, :class:`~isaaclab.assets.DeformableObjectCfg`, and shared base/data classes. * Added deformable body spawner, schema, and material APIs under :mod:`isaaclab.sim`, including :class:`~isaaclab.sim.DeformableObjectSpawnerCfg`, :class:`~isaaclab.sim.DeformableBodyPropertiesCfg`, :func:`~isaaclab.sim.define_deformable_body_properties`, :func:`~isaaclab.sim.modify_deformable_body_properties`, :class:`~isaaclab.sim.DeformableBodyMaterialCfg`, :class:`~isaaclab.sim.SurfaceDeformableBodyMaterialCfg`, and :func:`~isaaclab.sim.spawn_deformable_body_material`. * Added ``pytetwild`` as a package dependency for tetrahedral mesh generation. * Added deformable API, migration, and tutorial documentation for backend-neutral imports and Newton backend selection. * Added :mod:`isaaclab.scene_data` sub-package consolidating :class:`~isaaclab.scene_data.SceneDataProvider`, :class:`~isaaclab.scene_data.SceneDataBackend`, and :class:`~isaaclab.scene_data.SceneDataFormat` in a single import location. Changed ^^^^^^^ * :class:`~isaaclab.assets.BaseArticulation` no longer imports ``isaaclab_newton`` from its ``__init__``. Newton-native actuator authoring now flows through the generic ``_post_spawn`` hook on :class:`~isaaclab.assets.AssetBaseCfg`. * :meth:`~isaaclab.physics.PhysicsManager.set_decimation` now has an explicit ``pass`` body so the base class is consistent with the other no-op classmethods. * Removed temporary startup and runtime debug breadcrumbs from core simulation and environment setup logs. * Changed deformable spawners to accept backend-specific deformable property and material cfgs. Use PhysX cfgs from :mod:`isaaclab_physx.sim` or Newton cfgs from :mod:`isaaclab_newton.sim`. * Changed deformable demos and tutorials to use the backend-neutral :mod:`isaaclab.assets` and :mod:`isaaclab.sim` APIs with selectable PhysX or Newton backends. * Changed USD spawning to support deformable objects whose USD assets contain embedded tetrahedral mesh data. * **Breaking:** Renamed :class:`~isaaclab.sim.spawners.meshes.MeshSquareCfg` to :class:`~isaaclab.sim.spawners.meshes.MeshRectangleCfg` and :func:`~isaaclab.sim.spawners.meshes.spawn_mesh_square` to :func:`~isaaclab.sim.spawners.meshes.spawn_mesh_rectangle`. The ``size`` attribute is now a ``tuple[float, float]`` of X- and Y-axis lengths instead of a single edge length. Migrate ``MeshSquareCfg(size=s)`` to ``MeshRectangleCfg(size=(s, s))``. * **Breaking:** Moved :class:`~isaaclab.scene_data.SceneDataProvider` from :mod:`isaaclab.scene.scene_data_provider` and :class:`~isaaclab.scene_data.SceneDataBackend` / :class:`~isaaclab.scene_data.SceneDataFormat` from :mod:`isaaclab.physics` to the new :mod:`isaaclab.scene_data` sub-package. Update imports:: # before from isaaclab.scene.scene_data_provider import SceneDataProvider from isaaclab.physics import SceneDataBackend, SceneDataFormat # after from isaaclab.scene_data import SceneDataProvider, SceneDataBackend, SceneDataFormat Deprecated ^^^^^^^^^^ * Deprecated generic deformable property and material cfgs in favor of ``PhysxDeformableBodyPropertiesCfg``, ``PhysxDeformableBodyMaterialCfg``, ``PhysxSurfaceDeformableBodyMaterialCfg``, ``NewtonDeformableBodyPropertiesCfg``, ``NewtonDeformableBodyMaterialCfg``, and ``NewtonSurfaceDeformableBodyMaterialCfg``. Fixed ^^^^^ * Fixed three places where ``OvPhysxManager`` was misclassified as the PhysX backend by a substring/schema match: - :meth:`~isaaclab.sensors.SensorBase._register_callbacks` matched ``"physx" in physics_mgr_cls.__name__.lower()`` to gate the PhysX ``IsaacEvents.PRIM_DELETION`` import — the substring also matches ``"OvPhysxManager"``, so the ``isaaclab_physx`` import fired in kitless OVPhysX mode and raised :exc:`ModuleNotFoundError` because ``omni.physics.tensors`` is not loaded. Switched to an exact ``physics_mgr_cls.__name__ == "PhysxManager"`` match. - :meth:`~isaaclab.assets.AssetBase.set_debug_vis` had the same substring check guarding an ``import omni.kit.app`` call, which would fire for OVPhysX-backed assets and break under ``./scripts/run_ovphysx.sh``. Switched to an exact ``"PhysxManager"`` match. - :meth:`~isaaclab.physics.SceneDataProvider._get_backend` used ``"physx" in manager_name`` to dispatch the backend factory; this silently routed ``OvPhysxManager`` to the PhysX scene-data provider. Switched to exact ``"PhysxManager"`` / ``"NewtonManager"`` matches and an explicit ``ValueError`` for unknown managers. * Made :attr:`~isaaclab.scene.InteractiveScene.physics_scene_path` accept a bare :class:`pxr.UsdPhysics.Scene` prim as a fallback when no prim with ``PhysxSceneAPI`` applied is on the stage. Kitless OVPhysX does not load the ``omni.physx`` schema, so the auto-created scene prim only carries the stock USD type. PhysX-backed flows continue to prefer the ``PhysxSceneAPI`` prim. * Fixed a per-step performance regression in :func:`~isaaclab.envs.mdp.events.apply_external_force_torque` when the event was configured with all-zero ``force_range`` and ``torque_range`` (a common default for tasks that declare the event term but apply no disturbance). The event was unconditionally sampling zero wrenches and routing them through the dual-buffer ``WrenchComposer`` introduced in PR #5265, paying the full per-step compose-and-apply cost in :meth:`~isaaclab.assets.Articulation.write_data_to_sim` for what is semantically a no-op. The function now returns early when both ranges are exactly zero. This restores the H1, G1, and Anymal-C ``Velocity-Rough`` throughput observed prior to PR #5265. Behaviour for non-zero ranges is unchanged. * Fixed visualization marker backend initialization so USD markers remain available during rendering even when standalone visualizers are not launched. * Fixed :class:`~isaaclab.sim.views.FrameView` dispatch under the OVPhysX backend. ``FrameView(...)`` now routes to :class:`~isaaclab_ovphysx.sim.views.OvPhysxFrameView` instead of silently falling through to ``FabricFrameView``, which returned stale USD spawn poses for sensor frames riding on physics bodies. 5.5.1 (2026-05-19) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed a Windows fatal exception (``0xc0000139``) that crashed the process on startup when running any :class:`~isaaclab.envs.ManagerBasedRLEnv`-based script (e.g. ``skrl/play.py``) on machines where ``h5py``'s native DLL could not be loaded. The ``import h5py`` in :class:`~isaaclab.utils.datasets.HDF5DatasetFileHandler` was a top-level statement that executed unconditionally at import time. It is now deferred to the individual methods that open or create HDF5 files, so the DLL is only loaded when dataset recording is actually used. 5.5.0 (2026-05-18) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed the installation model of :meth:`~isaaclab.cli.commands.install.command_install` from per-submodule selection to a three-tier system. All core submodules (``isaaclab``, ``isaaclab_assets``, ``isaaclab_contrib``, ``isaaclab_experimental``, ``isaaclab_newton``, ``isaaclab_ov``, ``isaaclab_ovphysx``, ``isaaclab_physx``, ``isaaclab_rl``, ``isaaclab_tasks``, ``isaaclab_tasks_experimental``, ``isaaclab_visualizers``) are now always installed by ``./isaaclab.sh -i``. Optional submodules (``mimic``, ``teleop``) and automatic extra feature sets (``newton``, ``rl[...]``, ``visualizer[...]``) are installed by ``./isaaclab.sh -i`` / ``./isaaclab.sh -i all``. Optional dependency extras require selectors, so rlinf dependencies are installed with ``contrib[rlinf]`` and the ``ovrtx`` / ``ovphysx`` wheels are installed with ``ov[ovrtx]``, ``ov[ovphysx]``, or ``ov[all]``. Old per-submodule tokens (e.g. ``assets``, ``tasks``, ``physx``) now emit a warning and are skipped gracefully. Migrate using the table below: +----------------------------------------------+-------------------------------------------+ | Old command | New command | +==============================================+===========================================+ | ``./isaaclab.sh -i assets,tasks,physx`` | ``./isaaclab.sh -i none`` | +----------------------------------------------+-------------------------------------------+ | ``./isaaclab.sh -i assets,tasks,ov,rl[...]`` | ``./isaaclab.sh -i ov[all],rl[...]`` | +----------------------------------------------+-------------------------------------------+ | ``./isaaclab.sh -i newton,rl[all]`` | unchanged | +----------------------------------------------+-------------------------------------------+ | ``./isaaclab.sh -i mimic,teleop`` | unchanged | +----------------------------------------------+-------------------------------------------+ | ``uv pip install isaaclab[tasks,rl,assets]`` | ``uv pip install isaaclab[all]`` | +----------------------------------------------+-------------------------------------------+ * Simplified :mod:`isaaclab` package extras to ``isaacsim`` and ``all``; removed the old per-submodule extras (``tasks``, ``rl``, ``assets``, etc.) from ``pip install isaaclab[...]``. Removed ^^^^^^^ * Removed :func:`~isaaclab.cloner.cloner_utils.is_homogeneous` because it is an implementation detail. Fixed ^^^^^ * Fixed the ``isaaclab`` wheel's ``rsl-rl`` optional dependency to install ``rsl-rl-lib==5.0.1``, matching the version required by the RSL-RL training scripts. * Fixed the root ``uv run`` workflow by restoring the documented ``pyproject.toml`` extras, the IsaacLab-only ``all`` extra, and removing the Isaac Sim extra from the development project. * Fixed ``uv run`` creating ``.venv`` from an active conda Python by requiring uv-managed Python for the development project. 5.4.0 (2026-05-17) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.sensors.ray_caster.BaseRayCaster`, :class:`~isaaclab.sensors.ray_caster.BaseRayCasterCamera`, :class:`~isaaclab.sensors.ray_caster.BaseMultiMeshRayCaster`, and :class:`~isaaclab.sensors.ray_caster.BaseMultiMeshRayCasterCamera` carrying the backend-agnostic ray-caster logic. Backend subclasses override only the body-tracker and target-mesh-tracker hooks. Changed ^^^^^^^ * **Breaking:** Changed :class:`~isaaclab.sensors.camera.CameraData` camera-owned buffers to :class:`~isaaclab.utils.warp.ProxyArray`. Access torch tensor operations through the explicit ``.torch`` view. * :class:`~isaaclab.sensors.ray_caster.RayCaster`, :class:`~isaaclab.sensors.ray_caster.RayCasterCamera`, :class:`~isaaclab.sensors.ray_caster.MultiMeshRayCaster`, and :class:`~isaaclab.sensors.ray_caster.MultiMeshRayCasterCamera` are now :class:`~isaaclab.utils.backend_utils.FactoryBase` shims dispatching to PhysX / Newton implementations. Cfg surface and runtime semantics unchanged. * Changed ray-caster camera update paths to keep pose, ray, depth, normal, and mesh-id buffers Warp-owned internally, while exposing public camera outputs through :class:`~isaaclab.utils.warp.ProxyArray`. 5.3.0 (2026-05-16) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added unified ``train`` and ``play`` console-script entry points (``isaaclab.cli:train`` and ``isaaclab.cli:play``) that dispatch to a library-specific implementation via ``--rl_library``. Supported libraries are ``rsl_rl``, ``rl_games``, ``skrl``, ``sb3``, and ``rlinf``. * Added refactored per-library train/play scripts under ``scripts/reinforcement_learning/`` with a shared ``common.dispatch_library_entrypoint`` helper, replacing the previous standalone per-library scripts. * Added experimental ``uv run`` workflow allowing ``uv run train`` and ``uv run play`` directly from the repository root without manual environment setup. See :ref:`uv-run-training` for usage. * Added :attr:`~isaaclab.sim.converters.UrdfConverterCfg.ros_package_paths`, :attr:`~isaaclab.sim.converters.UrdfConverterCfg.robot_type`, :attr:`~isaaclab.sim.converters.UrdfConverterCfg.run_asset_transformer`, :attr:`~isaaclab.sim.converters.UrdfConverterCfg.run_multi_physics_conversion`, and :attr:`~isaaclab.sim.converters.UrdfConverterCfg.debug_mode` config fields that mirror the new :class:`isaacsim.asset.importer.urdf.URDFImporterConfig` options. * Extended :attr:`~isaaclab.sim.converters.UrdfConverterCfg.collision_type` to accept ``"Bounding Sphere"`` and ``"Bounding Cube"`` in addition to the existing ``"Convex Hull"`` and ``"Convex Decomposition"`` values. * Added :attr:`~isaaclab.sim.converters.MjcfConverterCfg.fix_base`, :attr:`~isaaclab.sim.converters.MjcfConverterCfg.link_density`, :attr:`~isaaclab.sim.converters.MjcfConverterCfg.robot_type`, :attr:`~isaaclab.sim.converters.MjcfConverterCfg.override_gain_type`, :attr:`~isaaclab.sim.converters.MjcfConverterCfg.override_bias_type`, :attr:`~isaaclab.sim.converters.MjcfConverterCfg.override_gain_prm`, :attr:`~isaaclab.sim.converters.MjcfConverterCfg.override_bias_prm`, :attr:`~isaaclab.sim.converters.MjcfConverterCfg.run_asset_transformer`, :attr:`~isaaclab.sim.converters.MjcfConverterCfg.run_multi_physics_conversion`, and :attr:`~isaaclab.sim.converters.MjcfConverterCfg.debug_mode` config fields that mirror the new :class:`isaacsim.asset.importer.mjcf.MJCFImporterConfig` options. * Added ``--deterministic`` flag to :class:`~isaaclab.app.app_launcher.AppLauncher` so training and rendering runs can opt into RTX/RTPT carb settings for more reproducible output after startup. * Added :func:`~isaaclab.cloner.cloner_utils.is_homogeneous` to detect whether a :class:`~isaaclab.cloner.ClonePlan` assigns every environment from every source (a homogeneous clone mask). * Added :class:`~isaaclab.envs.mdp.observations.stacked_image`, a stateful :class:`~isaaclab.managers.ManagerTermBase` that channel-stacks the last ``N`` frames from a camera sensor. Manager-based environments can reference it in observation cfg to add explicit temporal information for camera-based RL tasks whose renderer doesn't supply implicit temporal data (e.g., Newton Warp). Changed ^^^^^^^ * Refactored :class:`~isaaclab.sim.converters.UrdfConverter` to delegate the full conversion pipeline to :class:`isaacsim.asset.importer.urdf.URDFImporter` / :class:`isaacsim.asset.importer.urdf.URDFImporterConfig`. The duplicated IsaacLab implementations of ``_apply_fix_base``, ``_apply_link_density``, ``_apply_joint_drives``, ``_set_drive_type_on_joints``, ``_set_target_type_on_joints``, ``_set_drive_gains_on_joints``, and ``_fix_articulation_root_for_fixed_base`` have been removed and replaced with a thin translation layer that maps :class:`~isaaclab.sim.converters.UrdfConverterCfg` onto the Isaac Sim importer config. All behaviour is preserved. * Updated :class:`~isaaclab.sim.converters.MjcfConverter` to forward the full set of :class:`isaacsim.asset.importer.mjcf.MJCFImporterConfig` options to the Isaac Sim importer. * Bumped the ``newton[sim]`` pin from ``v1.2.0rc2`` to ``v1.2.0`` (stable) across :mod:`isaaclab_newton`, :mod:`isaaclab_physx` (``[newton]`` extra), :mod:`isaaclab_visualizers` (3×), and ``tools/wheel_builder/res/python_packages.toml``. Upstream release notes: `newton-physics/newton v1.2.0 `_. * No IsaacLab-side ``mujoco`` / ``mujoco-warp`` pin change — the transitive ``mjwarp`` bump flows in through ``newton[sim]`` since `isaac-sim/IsaacLab#5566 `_ dropped the explicit pins. * Changed Isaac Lab Docker images to run as the non-root ``isaaclab`` user by default. Use an explicit container user override when root access is required. * Changed :class:`~isaaclab.sensors.camera.CameraData` to expose all sensor buffers as :class:`~isaaclab.utils.warp.ProxyArray` instead of :class:`torch.Tensor`. The fields :attr:`~isaaclab.sensors.camera.CameraData.pos_w` (``wp.vec3f``), :attr:`~isaaclab.sensors.camera.CameraData.quat_w_world` (``wp.quatf``), :attr:`~isaaclab.sensors.camera.CameraData.intrinsic_matrices` (``wp.mat33f``), and all entries in :attr:`~isaaclab.sensors.camera.CameraData.output` are now backed by warp arrays. Use ``.torch`` for a zero-copy :class:`torch.Tensor` view or ``.warp`` to pass the array directly to a warp kernel. Existing code using these fields as tensors (indexing, arithmetic, :func:`torch.testing.assert_close`, etc.) continues to work via the :class:`~isaaclab.utils.warp.ProxyArray` deprecation bridge with a one-time :class:`DeprecationWarning`. * Updated :meth:`~isaaclab.renderers.BaseRenderer.set_outputs` and :meth:`~isaaclab.renderers.BaseRenderer.update_camera` in :class:`~isaaclab.renderers.BaseRenderer` to accept :class:`~isaaclab.utils.warp.ProxyArray` arguments instead of :class:`torch.Tensor`. Removed ^^^^^^^ * Removed :func:`~isaaclab.sim.converters.urdf_utils.merge_fixed_joints` as it is now handled by the Isaac Sim URDF importer. Fixed ^^^^^ * Fixed a startup crash in :class:`~isaaclab.app.AppLauncher` when launching with a CUDA device. Setting the current torch CUDA device used to happen before ``SimulationApp`` was created, which imported ``torch`` (and transitively NumPy/OpenBLAS) prior to Kit's platform-info fork. On systems where OpenBLAS's at-fork handlers were not yet safe, that fork could crash. The ``torch.cuda.set_device`` call is now deferred until after ``SimulationApp`` starts. * Fixed ``calculate_rotation_error`` in ``source/isaaclab/test/controllers/test_pink_ik.py`` composing rotation matrices with element-wise ``*`` instead of matrix multiplication ``@`` — a latent bug from `isaac-sim/IsaacLab#3149 `_ that surfaced as NaN after `isaac-sim/IsaacLab#5609 `_ added the unit-norm guard to ``quat_from_matrix``. * Made ``test_pink_ik`` deterministic by seeding the env (``env_cfg.seed = 42``) in ``create_test_env``. * Loosened the G1 Pink IK rotation tolerance from ``0.030`` rad to ``0.100`` rad in ``pink_ik_g1_test_configs.json`` to accommodate G1's intentionally smooth IK tuning (slower-converging than GR1T2). GR1T2 tolerance unchanged at ``0.020`` rad. 5.2.1 (2026-05-15) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :func:`~isaaclab.utils.math.create_rotation_matrix_from_view` returning a singular matrix when the look-at direction was parallel to the up axis. The function now produces a valid orthonormal frame via an alternate reference vector, and fills NaN for rows with truly undefined forward direction (``eyes == targets`` or non-finite input). Callers detect per-row failure with ``torch.isnan(R).any(dim=(-2, -1))``. * Fixed :func:`~isaaclab.utils.math.quat_from_matrix` silently returning a non-unit quaternion for non-rotation input (singular, reflection, or scale-error matrices). Such inputs now return NaN, detectable via :func:`torch.isnan`. * Fixed :meth:`~isaaclab.sensors.camera.Camera.set_world_poses_from_view` and :meth:`~isaaclab.sensors.ray_caster.RayCasterCamera.set_world_poses_from_view` silently applying garbage poses when an eye position equaled its target. Degenerate rows are now skipped (with a logged warning), and ``ValueError`` is raised if every row in the batch is degenerate. 5.2.0 (2026-05-14) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`~isaaclab.assets.BaseArticulationData.body_link_jacobian_w` and :attr:`~isaaclab.assets.BaseArticulationData.body_com_jacobian_w` properties, exposing the per-body geometric Jacobian referenced at the link origin and body center of mass respectively. The pair mirrors the existing :attr:`~isaaclab.assets.BaseArticulationData.body_link_pose_w` / :attr:`~isaaclab.assets.BaseArticulationData.body_com_pose_w` and :attr:`~isaaclab.assets.BaseArticulationData.body_link_vel_w` / :attr:`~isaaclab.assets.BaseArticulationData.body_com_vel_w` exposure pattern. Backends without a native primitive raise :class:`NotImplementedError`. * Added :attr:`~isaaclab.assets.BaseArticulationData.mass_matrix` property, exposing the joint-space generalized mass matrix ``M(q)``. * Added :attr:`~isaaclab.assets.BaseArticulationData.gravity_compensation_forces` property, exposing the joint-space gravity-loading torque vector ``g(q)``. * Added :attr:`~isaaclab.assets.BaseArticulation.num_base_dofs` — number of free DoFs of the floating base (``0`` for fixed-base, ``6`` for floating- base). Use it to map an actuated-joint index ``j`` to its column in the Jacobian / mass matrix / gravity vector via ``j + num_base_dofs``. * The Jacobian / mass-matrix / gravity-comp DoF axis includes the floating- base DoFs at the front: shape ``(N, num_jacobi_bodies, 6, num_joints + num_base_dofs)`` for the Jacobian and ``(N, num_joints + num_base_dofs, num_joints + num_base_dofs)`` for the mass matrix. This matches the cross-library industry convention (Pinocchio's ``nv = 6 + n_actuated``, Drake's ephemeral floating joint, MuJoCo's ````, RBDL's ``JointTypeFloatingBase``, OCS2's ``generalizedCoordinatesNum = 6 + actuatedJointsNum``, iDynTree's ``getFreeFloatingMassMatrix`` returning ``(6 + dofs, 6 + dofs)``). * Added :attr:`~isaaclab.scene_data.SceneDataProvider.usd_stage`, :attr:`~isaaclab.scene_data.SceneDataProvider.num_envs`, and :meth:`~isaaclab.scene_data.SceneDataProvider.get_camera_transforms` so visualizers and renderers can pull stage-derived data through the same Warp-native provider that already exposes transforms. Changed ^^^^^^^ * Migrated :class:`~isaaclab.envs.mdp.actions.task_space_actions.DifferentialInverseKinematicsAction`, :class:`~isaaclab.envs.mdp.actions.task_space_actions.OperationalSpaceControllerAction`, and :class:`~isaaclab.envs.mdp.actions.rmpflow_task_space_actions.RMPFlowAction` to fetch dynamic quantities through the new :class:`~isaaclab.assets.BaseArticulationData` properties instead of the PhysX-only ``root_view``. The OSC action term now also gates the per-step mass-matrix and gravity-compensation fetches behind the controller cfg's :attr:`inertial_dynamics_decoupling`, :attr:`nullspace_control`, and :attr:`gravity_compensation` flags so backends without a native primitive are not invoked when the controller does not consume the result. * Action terms (DiffIK / OSC / RMPFlow / Pink) compute their Jacobian joint-axis indices via ``[j + asset.num_base_dofs for j in joint_ids]``, which is ``0`` for fixed-base and ``+6`` for floating-base. Pink IK previously hardcoded a private ``_physx_floating_joint_indices_offset = 6``; that was removed in favor of the cross-backend property. * PhysX backend's :attr:`body_link_jacobian_w` applies the COM→origin shift to PhysX's natively COM-referenced Jacobian. The previously-exposed ``Articulation.get_jacobians()`` was a passthrough that returned the raw COM-referenced Jacobian, while IK / OSC consumers also read :attr:`body_link_pose_w` as the EE pose setpoint — a frame mismatch that produced a ``ω × r_com_w`` per-body bias in tracking. The new property reads the same engine buffer and applies the shift so ``J · q_dot`` matches ``body_link_lin_vel_w``. Consumers that intentionally want the raw COM-referenced form can read :attr:`body_com_jacobian_w`. * **Breaking:** :class:`~isaaclab.visualizers.base_visualizer.BaseVisualizer` subclasses now receive a :class:`~isaaclab.scene_data.SceneDataProvider` in :meth:`~isaaclab.visualizers.base_visualizer.BaseVisualizer.initialize` instead of the removed ``BaseSceneDataProvider``. Read environment count from :attr:`~isaaclab.scene_data.SceneDataProvider.num_envs` and call :meth:`~isaaclab.scene_data.SceneDataProvider.get_camera_transforms` on the new provider; both replace the previous ``get_metadata()`` / ``get_camera_transforms()`` calls on the legacy interface. Removed ^^^^^^^ * **Breaking:** Removed ``isaaclab.physics.BaseSceneDataProvider``, ``isaaclab.physics.SceneDataProvider`` (the legacy factory), ``SimulationContext.initialize_scene_data_provider()``, and ``SimulationContext.update_scene_data_provider()``. Use :meth:`~isaaclab.sim.simulation_context.SimulationContext.get_scene_data_provider` to obtain the new provider; consumers that previously called ``get_newton_model()`` / ``get_newton_state()`` should call ``NewtonManager.get_model()`` / ``NewtonManager.get_state()`` instead. * Removed explicit ``mujoco`` and ``mujoco-warp`` dependencies from :mod:`isaaclab`. These packages are not used by ``isaaclab`` core and are now resolved transitively through Newton's ``[sim]`` extra in :mod:`isaaclab_newton`. Users installing only the PhysX or Kit backends no longer pull in MuJoCo. Fixed ^^^^^ * Fixed :class:`~envs.LeappDeploymentEnv` crashing on ``reset()`` with ``AttributeError: 'LeappDeploymentEnv' object has no attribute 'extras'`` by initializing ``self.extras`` in ``__init__``. * Fixed ``./isaaclab.sh -p -m pip ...`` failing with ``No module named pip`` in the conda env created from ``environment.yml`` on Linux aarch64 (e.g. DGX Spark / GB10). The conda-forge solver was not pulling ``pip`` in transitively on aarch64, so the resulting ``env_isaaclab`` had no pip. ``environment.yml`` now lists ``pip`` explicitly so it is seeded on every platform. * Fixed ``pip install isaaclab[isaacsim,all]==3.0.0`` failing with ``No solution found`` (UV) or ``error: resolution-too-deep`` (pip) when resolving against ``isaacsim==6.0.0.0``. ``viser>=1.0.16`` was a base dependency of the built ``isaaclab`` wheel and transitively requires ``websockets>=13.1``, but ``isaacsim-kernel==6.0.0.0`` pins ``websockets==12.0``. Moved ``viser`` to an opt-in ``viser`` extra in ``tools/wheel_builder/res/python_packages.toml`` so the base wheel is installable alongside ``isaacsim==6.0.0.0``. Users who want the Viser visualizer can request it explicitly with ``isaaclab[viser]``. 5.1.1 (2026-05-13) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed Newton-related dependencies to use MuJoCo 3.8, MuJoCo Warp 3.8.0.2, Warp 1.13 or newer, and the packaged Newton 1.2.0 release candidate. Fixed ^^^^^ * Fixed a spurious ``[Error][carb] Client passed into the framework is nullptr.`` log emitted from :meth:`~isaaclab.cloner._fabric_notices.FabricNoticeBindings.initialize` when an environment imports IsaacLab outside Kit (e.g. remote asset resolution via ``omni.client``). The helper was passing ``clientName=None`` as a fallback to ``tryAcquireInterfaceWithClient``; Carbonite has rejected null client names since 2018, so the call only emitted a misleading error log and never returned a valid interface. The fallback has been removed; the helper still fails closed when Fabric is unavailable, with no impact on the cloning speedup when Fabric is present. 5.1.0 (2026-05-12) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :meth:`~isaaclab.scene.InteractiveScene.initialize_renderers` to pre-create renderer backends for all scene sensors with a ``renderer_cfg`` against the shared :class:`~isaaclab.renderers.render_context.RenderContext`. The method is idempotent and is now invoked from :class:`~isaaclab.envs.DirectRLEnv`, :class:`~isaaclab.envs.DirectMARLEnv`, :class:`~isaaclab.envs.ManagerBasedEnv`, and :class:`~isaaclab.envs.LeappDeploymentEnv` after scene construction so that renderer backend creation order is deterministic and front-loaded before the first :meth:`~isaaclab.sim.SimulationContext.reset`. * Added :meth:`~isaaclab.renderers.base_renderer.BaseRenderer.initialize` post-physics lifecycle hook (default no-op) that runs once per backend after :meth:`~isaaclab.sim.SimulationContext.reset` builds physics models. ``__init__`` now defines the pre-physics phase (eagerly invoked by :meth:`~isaaclab.scene.InteractiveScene.initialize_renderers`) and ``initialize`` defines the post-physics phase, letting backends whose setup needs scene data (e.g. a built Newton model) defer that work cleanly. Driven by :meth:`~isaaclab.renderers.render_context.RenderContext.ensure_initialize`, registered on :class:`~isaaclab.physics.physics_manager.PhysicsEvent` ``PHYSICS_READY`` by :class:`~isaaclab.sim.SimulationContext` at ``order=5`` so it fires before sensor/asset callbacks (``order=10``). This decouples renderer post-physics setup from camera initialization. Backends created lazily after PHYSICS_READY are eagerly initialized at :meth:`~isaaclab.renderers.render_context.RenderContext.get_renderer` time. * Added forwarding shims on :mod:`isaaclab.sim.schemas` and :mod:`isaaclab.sim` for the Newton/MuJoCo cfg classes added in :mod:`isaaclab_newton.sim.schemas` (:class:`NewtonRigidBodyPropertiesCfg`, :class:`NewtonJointDrivePropertiesCfg`, :class:`NewtonCollisionPropertiesCfg`, :class:`NewtonMeshCollisionPropertiesCfg`, :class:`NewtonMaterialPropertiesCfg`, :class:`NewtonArticulationRootPropertiesCfg`, :class:`MujocoRigidBodyPropertiesCfg`, :class:`MujocoJointDrivePropertiesCfg`). The shims resolve lazily on first access so importing :mod:`isaaclab.sim.schemas` does not require :mod:`isaaclab_newton` to be installed. Fixed ^^^^^ * Fixed extension installation to honor ``pip_upgrade_dependencies`` declared in ``config/extension.toml``. 5.0.0 (2026-05-11) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.cloner.ClonePlan` as the flat clone contract shared by scene cloning, backend replication, and scene-data providers. * Added :meth:`~isaaclab.sim.SimulationContext.get_clone_plan` and :meth:`~isaaclab.sim.SimulationContext.set_clone_plan` for publishing the scene's clone plan. * Added :attr:`~isaaclab.scene.InteractiveScene.clone_plan` for consumers holding a scene reference. * Added explicit ``spawn_paths`` support to multi-asset spawners so scene planning can spawn representative heterogeneous sources directly. Changed ^^^^^^^ * **Breaking:** Changed scene-data providers to build visualizer backend models from :meth:`~isaaclab.sim.SimulationContext.get_clone_plan` instead of a clone-time visualizer artifact. Use the published :class:`~isaaclab.cloner.ClonePlan` for custom scene-data integrations. * **Breaking:** Changed :class:`~isaaclab.scene.InteractiveScene` to build clone plans directly from asset configuration, spawn representative sources in their selected environments, and replicate from those sources instead of spawning and discovering prototypes under ``/World/template``. * **Breaking:** Replaced ``TemplateCloneCfg`` with :class:`~isaaclab.cloner.CloneCfg` for clone execution settings. * **Breaking:** Changed :func:`~isaaclab.cloner.make_clone_plan` to return a :class:`~isaaclab.cloner.ClonePlan` object directly. * **Breaking:** Changed clone plan publication to use :meth:`~isaaclab.sim.SimulationContext.get_clone_plan` and :meth:`~isaaclab.sim.SimulationContext.set_clone_plan` for the single scene clone plan. Removed ^^^^^^^ * **Breaking:** Removed :attr:`~isaaclab.cloner.TemplateCloneCfg.visualizer_clone_fn`, :func:`~isaaclab.cloner.resolve_visualizer_clone_fn`, and :class:`~isaaclab.physics.scene_data_requirements.VisualizerPrebuiltArtifacts`. Use the :class:`~isaaclab.cloner.ClonePlan` published through :meth:`~isaaclab.sim.SimulationContext.get_clone_plan` instead. * **Breaking:** Removed :meth:`~isaaclab.sim.SimulationContext.get_scene_data_visualizer_prebuilt_artifact`, :meth:`~isaaclab.sim.SimulationContext.set_scene_data_visualizer_prebuilt_artifact`, and :meth:`~isaaclab.sim.SimulationContext.clear_scene_data_visualizer_prebuilt_artifact`. Use :meth:`~isaaclab.sim.SimulationContext.get_clone_plan` / :meth:`~isaaclab.sim.SimulationContext.set_clone_plan` instead. * **Breaking:** Removed :func:`~isaaclab.cloner.clone_from_template`. Use :func:`~isaaclab.cloner.make_clone_plan`, :func:`~isaaclab.cloner.usd_replicate`, and backend physics replication functions for direct cloning workflows. 4.8.2 (2026-05-10) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed Pink IK setup checks to reinstall and report the required ``daqp`` solver when it is missing or incompatible. 4.8.1 (2026-05-09) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed the Pink IK task-space action base link frame lookup to read direct body link pose data instead of slicing packed body link state. No user migration is required. * Added :mod:`filelock` to ``isaaclab`` install requirements. Fixed ^^^^^ * Fixed :class:`~isaaclab.assets.Articulation` joint friction API docs to clarify backend-specific semantics. * Fixed :class:`~isaaclab.envs.mdp.actions.PinkInverseKinematicsAction` base link pose reads to avoid deprecated body link state access. * Fixed the sensor overview documentation to include :class:`~isaaclab.sensors.Pva` and :class:`~isaaclab.sensors.JointWrenchSensor`. * Fixed the PVA sensor demo to align front-foot sensor names with their prim paths. * Fixed Sphinx docs build failing due to ``https://nvidia.github.io/warp/objects.inv`` returning 404. Pinned the ``warp`` intersphinx mapping to ``/stable/``, which is where the inventory now lives. * Fixed the sensor prim-deletion callback guard so the OvPhysX backend is not treated as the Kit PhysX backend. * Relaxed the ``starlette`` pin in :mod:`isaaclab` from ``==0.49.1`` to ``>=0.46.0,<0.50`` so installs of ``isaaclab[isaacsim,all]==3.0.0`` alongside ``isaacsim==6.0.0.0`` resolve cleanly. The transitive pin from ``isaacsim-kernel`` -> ``fastapi==0.117.1`` requires ``starlette<0.49.0``; the previous exact pin was mutually exclusive. * Fixed :mod:`isaaclab.sim.spawners.from_files` failing to import on Windows due to an unconditional ``import fcntl`` (Unix-only). The distributed-rank USD spawn lock now uses :class:`filelock.FileLock`, which works on both Windows and POSIX. * Certain functions in test_math were failing non deterministically. This was caused by not setting seed values. 4.8.0 (2026-05-08) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Bumped Newton pin to ``v1.2.0rc2``. Pulls in IsaacLab-relevant fixes from `newton-physics/newton#2678 `_ and `newton-physics/newton#2720 `_ (``SolverKamino`` reset under ``world_mask``), the upstream tendon-scoping fix from `newton-physics/newton#2659 `_ ("Scope USD custom-frequency parsing"), and a VRAM-leak fix on example reset (`newton-physics/newton#2710 `_). * Newton ``v1.2.0rc2`` requires ``warp-lang==1.13.0``, ``mujoco==3.8.0``, and ``mujoco-warp==3.8.0.1``. ``warp-lang``/``mujoco``/``mujoco-warp`` pins live in :mod:`isaaclab` and ``tools/wheel_builder/res/python_packages.toml``; the Newton pin is mirrored across :mod:`isaaclab_newton`, :mod:`isaaclab_visualizers` (3×), :mod:`isaaclab_physx` (``[newton]`` extra), and the wheel-builder TOML. * Updated ``wp.math.transform_to_matrix`` to ``wp.transform_to_matrix`` in :mod:`~isaaclab_newton.physics.newton_manager` and :mod:`~isaaclab_ov.renderers.ovrtx_renderer_kernels` to match the ``warp-lang`` 1.13 API (the ``wp.math`` namespace was removed). 4.7.0 (2026-05-08) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added LEAPP export support for manager-based RSL-RL policies, including export-time observation/action annotation, recurrent actor-state handling, and deployment through :mod:`scripts.reinforcement_learning.leapp.deploy`. * Added a Direct workflow LEAPP export tutorial and annotated ANYmal-C example script showing how to mark policy inputs, outputs, and persistent state with LEAPP annotations. Direct workflow policies can be exported with :mod:`scripts.reinforcement_learning.leapp.rsl_rl.export`, but are not yet supported by :mod:`scripts.reinforcement_learning.leapp.deploy`. * Added LEAPP deployment documentation describing the exported-policy validation flow and linking the manager-based and Direct workflow export paths. * Added LEAPP export annotations, proxy utilities, and deployment environment support for Isaac Lab assets, sensors, commands, and manager-based environments. * Added :class:`~isaaclab.renderers.camera_render_spec.CameraRenderSpec` so render backends take explicit camera inputs (USD paths, :class:`~isaaclab.sensors.camera.CameraCfg`, device, counts) instead of the :class:`~isaaclab.sensors.camera.Camera` instance. * Added :class:`~isaaclab.renderers.render_context.RenderContext` (accessed as :attr:`~isaaclab.sim.simulation_context.SimulationContext.render_context`) to own one or more :class:`~isaaclab.renderers.base_renderer.BaseRenderer` instances: configurations that compare equal under ``==`` and share the same concrete :class:`~isaaclab.renderers.renderer_cfg.RendererCfg` class reuse a backend; distinct types (e.g. Isaac RTX and Newton) register separate backends, each with :meth:`~isaaclab.renderers.base_renderer.BaseRenderer.prepare_stage` the first time a camera with that configuration initializes. * Added :meth:`~isaaclab.renderers.render_context.RenderContext.render_into_camera` to run :meth:`~isaaclab.renderers.render_context.RenderContext.update_transforms` (at most once per physics step), then :meth:`~isaaclab.renderers.base_renderer.BaseRenderer.render` and :meth:`~isaaclab.renderers.base_renderer.BaseRenderer.read_output`. * Added :meth:`~isaaclab.sim.simulation_context.SimulationContext.get_physics_step_count`. * Added :class:`~isaaclab.cloner.ClonePlan` frozen dataclass capturing per-group prototype-to-environment mappings (``dest_template``, ``prototype_paths``, ``clone_mask``). Lets downstream consumers (scene data providers, mesh samplers) read prototype geometry once and scatter to environments via the per-group mask instead of walking per-env USD paths. * Added :meth:`~isaaclab.sim.SimulationContext.get_clone_plans` and :meth:`~isaaclab.sim.SimulationContext.set_clone_plans` for publishing and consuming the cloner's per-group plan map. * Added :attr:`~isaaclab.scene.InteractiveScene.clone_plans` property (forwards to :meth:`~isaaclab.sim.SimulationContext.get_clone_plans`) so consumers holding a scene reference can read the published plans without going through the sim context. * Added backend-agnostic :class:`~isaaclab.markers.VisualizationMarkers` support for marker-capable Kit, Newton, Rerun, and Viser visualizers. * Added :meth:`~isaaclab.utils.backend_utils.get_default_renderer_cfg`. to lazy load the IsaacRtxRendererCfg * Added :class:`~isaaclab.sim.spawners.materials.RigidBodyMaterialBaseCfg`, the solver-common base class for rigid-body physics materials. Carries the ``UsdPhysics.MaterialAPI`` standard fields (``static_friction``, ``dynamic_friction``, ``restitution``). The PhysX-specific compliant-contact and combine-mode fields moved to :class:`~isaaclab_physx.sim.spawners.materials.PhysxRigidBodyMaterialCfg`. * Added :class:`~isaaclab.sim.schemas.CollisionBaseCfg`, the solver-common base class for collision properties. Carries :attr:`collision_enabled` (``UsdPhysics.CollisionAPI``) plus :attr:`contact_offset` and :attr:`rest_offset` whose USD attributes are PhysX-namespaced but are consumed by Newton's importer via the PhysX bridge resolver (``import_usd.py:2104, 2111``). * Added :class:`~isaaclab.sim.schemas.ArticulationRootBaseCfg`, the solver-common base class for articulation root properties (``fix_root_link``, ``articulation_enabled``). * Added :class:`~isaaclab.sim.schemas.MeshCollisionBaseCfg`, the solver-common base class for mesh collision properties carrying ``mesh_approximation_name`` (writes ``physics:approximation`` via :class:`UsdPhysics.MeshCollisionAPI`). The class-level ``_usd_applied_schema`` metadata replaces the deprecated ``usd_api`` / ``physx_api`` instance-field dispatch. Changed ^^^^^^^ * :class:`~isaaclab.sensors.camera.Camera` obtains a backend via :meth:`~isaaclab.renderers.render_context.RenderContext.get_renderer` and calls :meth:`~isaaclab.renderers.base_renderer.BaseRenderer.create_render_data` with a :class:`~isaaclab.renderers.camera_render_spec.CameraRenderSpec` (no :class:`~isaaclab.sensors.sensor_base.SensorBase` reference on the public API). * :class:`~isaaclab.scene.interactive_scene.InteractiveScene` calls :meth:`~isaaclab.renderers.render_context.RenderContext.update_transforms` once at the start of :meth:`~isaaclab.scene.interactive_scene.InteractiveScene.update` when ``lazy_sensor_update`` is false; fetches that render still dedupe the same way via ``physics_step_count`` in :class:`~isaaclab.renderers.render_context.RenderContext`. * **Breaking:** :func:`~isaaclab.cloner.clone_from_template` now returns ``dict[str, ClonePlan]`` instead of ``None``. Bind the result and publish it through :meth:`~isaaclab.sim.SimulationContext.set_clone_plans` if downstream consumers (e.g. the PhysX scene data provider's Newton-visualizer build path) need to read the plan. * Changed :func:`~isaaclab.envs.mdp.body_incoming_wrench` to read from :class:`~isaaclab.sensors.JointWrenchSensor`. Pass ``sensor_cfg=SceneEntityCfg("joint_wrench", body_names=...)`` instead of an articulation asset config. * Updated :class:`~isaaclab.sensors.camera.Camera` to construct its internal :class:`~isaaclab.sim.views.FrameView` without the now-removed ``sync_usd_on_fabric_write`` kwarg. USD attributes on camera prims are no longer kept in sync with Fabric writes; read poses through the view's getters instead. * :class:`~isaaclab.sensors.camera.CameraCfg` now defaults its render_cfg to :class:`~isaaclab.renderers.RenderCfg` :meth:`~isaaclab.utils.backend_utils.get_default_renderer_cfg` is called during __post_init__ to replace the generic RenderCfg with the default config :class:`~isaaclab_physx.renderers.IsaacRtxRendererCfg` * Cleaned up the schema-cfg base classes to no longer carry PhysX namespace metadata. :class:`~isaaclab.sim.schemas.RigidBodyBaseCfg`, :class:`~isaaclab.sim.schemas.CollisionBaseCfg`, :class:`~isaaclab.sim.schemas.ArticulationRootBaseCfg`, and :class:`~isaaclab.sim.schemas.JointDriveBaseCfg` now declare ``_usd_namespace = None`` and ``_usd_applied_schema = None``. Per-field PhysX overrides for fields whose only USD path today is the ``physx*:*`` namespace (``disable_gravity``, ``contact_offset``, ``rest_offset``, ``articulation_enabled``, ``max_velocity``) are declared via a new ``_usd_field_exceptions`` mapping ``applied_schema -> (namespace, {cfg_field: usd_attr})``. When any listed field is non-None at write time, the writer applies that schema and writes the attribute under the exception namespace; otherwise the schema is not stamped onto the prim. PhysX subclasses (:class:`PhysxRigidBodyPropertiesCfg`, :class:`PhysxCollisionPropertiesCfg`, :class:`PhysxArticulationRootPropertiesCfg`, :class:`PhysxJointDrivePropertiesCfg`) now self-declare ``_usd_namespace`` and ``_usd_applied_schema`` for their own fields. Observable behavior on standard inputs is unchanged. * Consolidated the per-writer schema-application loop in :mod:`isaaclab.sim.schemas` into a single shared helper ``_apply_namespaced_schemas``. ``modify_articulation_root_properties``, ``modify_rigid_body_properties``, ``modify_collision_properties``, ``modify_joint_drive_properties``, ``modify_mesh_collision_properties``, and ``spawn_rigid_body_material`` all delegate to the helper after writing their typed-API ``UsdPhysics`` fields. The canonical exception-table + main-namespace gating logic now lives in one place instead of being duplicated across six call sites. * Moved the ``max_velocity`` field from :class:`~isaaclab_physx.sim.schemas.PhysxJointDrivePropertiesCfg` to :class:`~isaaclab.sim.schemas.JointDriveBaseCfg`. The field is the only USD path to set Newton's ``Model.joint_velocity_limit`` and is consumed by Newton's importer. The USD attribute written is unchanged (``physxJoint:maxJointVelocity``); existing code using ``PhysxJointDrivePropertiesCfg(max_velocity=...)`` continues to work because the field is inherited. * Moved the ``disable_gravity`` field from :class:`~isaaclab_physx.sim.schemas.PhysxRigidBodyPropertiesCfg` to :class:`~isaaclab.sim.schemas.RigidBodyBaseCfg`. PhysX honors per-body via ``physxRigidBody:disableGravity``; Newton currently honors at scene level (partial), documented in the field docstring. Existing code using ``PhysxRigidBodyPropertiesCfg(disable_gravity=...)`` continues to work via inheritance. * Documented :attr:`~isaaclab.sim.schemas.ArticulationRootPropertiesCfg.articulation_enabled` and :attr:`~isaaclab.sim.schemas.ArticulationRootPropertiesCfg.enabled_self_collisions` to lock their placement for the future :class:`ArticulationRootBaseCfg` / ``PhysxArticulationRootPropertiesCfg`` split: ``articulation_enabled`` stays on the base (single-namespace USD with verified Newton consumer); ``enabled_self_collisions`` moves to the PhysX subclass (dual-namespace USD, with a future Newton sibling cfg owning the ``newton:*`` namespace). * Changed the defaults of :attr:`~isaaclab_physx.sim.spawners.materials.PhysxRigidBodyMaterialCfg.compliant_contact_stiffness`, :attr:`compliant_contact_damping`, :attr:`friction_combine_mode`, and :attr:`restitution_combine_mode` from concrete values (``0.0``, ``0.0``, ``"average"``, ``"average"``) to ``None``. PhysX engine defaults match the previous concrete values, so user-observable simulation behavior is unchanged; the difference is that these attributes are now authored on the prim only when the user explicitly sets them (consistent with the rest of the consumption-gated cfg layer). * Relocated :class:`RigidBodyMaterialCfg` to :mod:`isaaclab_physx.sim.spawners.materials` and split its fields between the new :class:`~isaaclab.sim.spawners.materials.RigidBodyMaterialBaseCfg` (UsdPhysics-standard friction/restitution) and :class:`~isaaclab_physx.sim.spawners.materials.PhysxRigidBodyMaterialCfg` (PhysX-specific compliant-contact and combine-mode fields). A forwarding shim on :mod:`isaaclab.sim.spawners.materials` and :mod:`isaaclab.sim` preserves existing imports. * Refactored :func:`~isaaclab.sim.spawners.materials.spawn_rigid_body_material` to be metadata-driven: it reads ``_usd_applied_schema``, ``_usd_namespace``, and ``_usd_attr_name_map`` from the cfg class and gates ``PhysxMaterialAPI`` application on whether the user authored at least one PhysX-namespaced field with a non-``None`` value. Previously, the writer applied ``PhysxMaterialAPI`` unconditionally on every material spawn. * Relocated :class:`CollisionPropertiesCfg` to :mod:`isaaclab_physx.sim.schemas` and split its fields between the new :class:`~isaaclab.sim.schemas.CollisionBaseCfg` (solver-common ``collision_enabled`` plus the PhysX-namespaced but Newton-consumed ``contact_offset`` / ``rest_offset``) and :class:`~isaaclab_physx.sim.schemas.PhysxCollisionPropertiesCfg` (PhysX-only ``torsional_patch_radius`` / ``min_torsional_patch_radius``). A forwarding shim on :mod:`isaaclab.sim.schemas`, :mod:`isaaclab.sim.schemas.schemas_cfg`, and :mod:`isaaclab.sim` preserves existing imports. * Refactored :func:`~isaaclab.sim.schemas.modify_collision_properties` to be metadata-driven and to gate ``PhysxCollisionAPI`` application on whether the user authored at least one PhysX-namespaced field with a non-``None`` value. Previously, the writer applied ``PhysxCollisionAPI`` unconditionally on every collision prim, stamping the schema onto Newton-targeted prims that only set ``collision_enabled``. * Relocated :class:`ArticulationRootPropertiesCfg` to :mod:`isaaclab_physx.sim.schemas` and split its fields between the new :class:`~isaaclab.sim.schemas.ArticulationRootBaseCfg` (solver-common ``fix_root_link`` plus the PhysX-namespaced ``articulation_enabled`` which is consumed by the IL Newton wrapper as a spawn-time guard) and :class:`~isaaclab_physx.sim.schemas.PhysxArticulationRootPropertiesCfg` (``enabled_self_collisions`` and PhysX TGS solver iter / sleep / stabilization thresholds). A forwarding shim on :mod:`isaaclab.sim.schemas`, :mod:`isaaclab.sim.schemas.schemas_cfg`, and :mod:`isaaclab.sim` preserves existing imports. * Refactored :func:`~isaaclab.sim.schemas.modify_articulation_root_properties` to be metadata-driven and to gate ``PhysxArticulationAPI`` application on whether the user authored at least one PhysX-namespaced field with a non-``None`` value. Previously, the writer applied ``PhysxArticulationAPI`` unconditionally on every articulation root, stamping the schema onto Newton-targeted prims that only set ``fix_root_link``. * Relocated :class:`MeshCollisionPropertiesCfg`, :class:`ConvexHullPropertiesCfg`, :class:`ConvexDecompositionPropertiesCfg`, :class:`TriangleMeshPropertiesCfg`, :class:`TriangleMeshSimplificationPropertiesCfg`, and :class:`SDFMeshPropertiesCfg` to :mod:`isaaclab_physx.sim.schemas`. :class:`BoundingCubePropertiesCfg` and :class:`BoundingSpherePropertiesCfg` stay in core because they author no PhysX schema. A forwarding shim preserves existing imports. * Refactored :func:`~isaaclab.sim.schemas.modify_mesh_collision_properties` to be metadata-driven. The writer now reads ``_usd_applied_schema`` and ``_usd_namespace`` from the cfg class instead of consulting instance-level ``usd_api`` / ``physx_api`` fields. The standard :class:`UsdPhysics.MeshCollisionAPI` is always applied; PhysX cooking schemas (``PhysxConvexHullCollisionAPI`` etc.) are gated on at least one PhysX-namespaced tuning field being set. * Relocated :class:`FixedTendonPropertiesCfg` and :class:`SpatialTendonPropertiesCfg` to :mod:`isaaclab_physx.sim.schemas` as :class:`PhysxFixedTendonPropertiesCfg` and :class:`PhysxSpatialTendonPropertiesCfg`. Tendons are a PhysX-only feature; no Newton equivalent exists. A forwarding shim on :mod:`isaaclab.sim.schemas`, :mod:`isaaclab.sim.schemas.schemas_cfg`, and :mod:`isaaclab.sim` preserves existing imports. Deprecated ^^^^^^^^^^ * Deprecated the ``usd_api`` and ``physx_api`` instance attributes on the mesh-collision cfg classes in favor of class-level ``_usd_applied_schema`` metadata. Reading these attributes still works through one minor version but emits a ``DeprecationWarning``. Scheduled for removal in 5.0. Removed ^^^^^^^ * **Breaking:** Removed :attr:`~isaaclab.cloner.TemplateCloneCfg.visualizer_clone_fn`, :func:`~isaaclab.cloner.resolve_visualizer_clone_fn`, and :class:`~isaaclab.physics.scene_data_requirements.VisualizerPrebuiltArtifacts`. Scene data providers now build backend models from the :class:`~isaaclab.cloner.ClonePlan` map via :meth:`~isaaclab.sim.SimulationContext.get_clone_plans` instead of receiving a prebuilt artifact through a clone-time callback. * **Breaking:** Removed :meth:`~isaaclab.sim.SimulationContext.get_scene_data_visualizer_prebuilt_artifact`, :meth:`~isaaclab.sim.SimulationContext.set_scene_data_visualizer_prebuilt_artifact`, and :meth:`~isaaclab.sim.SimulationContext.clear_scene_data_visualizer_prebuilt_artifact`. Use :meth:`~isaaclab.sim.SimulationContext.get_clone_plans` / :meth:`~isaaclab.sim.SimulationContext.set_clone_plans` instead. * Removed ``BaseArticulationData.body_incoming_joint_wrench_b``. Add :class:`~isaaclab.sensors.JointWrenchSensorCfg` to the scene and read :attr:`~isaaclab.sensors.JointWrenchSensorData.force` and :attr:`~isaaclab.sensors.JointWrenchSensorData.torque` instead. Fixed ^^^^^ * Pinned ``omniverseclient`` to ``2.71.1.7015``. * Fixed :meth:`~isaaclab.sim.schemas.modify_joint_drive_properties` and :meth:`~isaaclab.sim.schemas.modify_rigid_body_properties` so that ``PhysxJointAPI`` and ``PhysxRigidBodyAPI`` are applied only when the user authored at least one PhysX-namespaced field with a non-``None`` value. Previously, schema application was gated on class-level metadata being defined, which caused Newton-targeted prims to receive PhysX schemas even when the user only set base ``UsdPhysics``-standard fields. 4.6.27 (2026-05-01) ~~~~~~~~~~~~~~~~~~~ * Added :class:`~isaaclab.sensors.JointWrenchSensor`. 4.6.26 (2026-05-01) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``Metrics/success_rate`` tracking to benchmark scripts. The result is always logged to the benchmark artifact; ``--check_success`` additionally early-stops training on convergence. 4.6.25 (2026-04-28) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed ``isaaclab.bat --install`` on Windows 11 failing with ``'"setuptools<82.0.0"': Expected package name at the start of dependency specifier``. ``extract_python_exe`` now prefers the underlying ``kit/python/python.exe`` over Isaac Sim's ``python.bat`` so child pip calls bypass the cmd.exe quoting hop that was preserving the literal double quotes through to pip's argv. The fallback ``cmd.exe /c`` wrapper for ``.bat``/``.cmd`` invocations now also uses caret-escaping (e.g. ``setuptools^<82.0.0``) for metacharacters instead of double-quoting, so the bat-hop path no longer leaks quotes. 4.6.24 (2026-04-28) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed ``./isaaclab.sh -i`` failing to build the ``nlopt`` wheel on ARM Linux (e.g. DGX Spark) when the host image is missing SWIG. The bare-metal install path now mirrors ``docker/Dockerfile.base``: on ARM Linux it installs ``swig`` via apt and pre-installs ``nlopt==2.6.2`` with ``--no-build-isolation`` so later submodule installs skip the source-build fallback. 4.6.23 (2026-04-30) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`~isaaclab.assets.AssetBaseCfg.disable_shape_checks` configuration option to skip shape/dtype validation in setter and writer methods, reducing per-call overhead in production workloads. Fixed ^^^^^ * Fixed cross-backend asset interface regression tests to cover tensor views passed to backend index resolution helpers. 4.6.22 (2026-04-27) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * :class:`~isaaclab.renderers.BaseRenderer` now publishes a renderer-owned output contract via ``supported_output_types() -> {RenderBufferKind: RenderBufferSpec}``. :class:`~isaaclab.sensors.camera.CameraData` allocates buffers for the intersection of the requested ``data_types`` and the contract; ``rgb`` is exposed as a view into ``rgba`` when both are published. Requested types the active backend cannot produce are dropped with a single warning instead of being silently discarded later. * :class:`~isaaclab_ov.renderers.OVRTXRenderer` now writes rendered tiles directly into the torch storage backing ``camera.data.output``, eliminating the per-frame ``wp.copy`` bridge. * Moved Kit/RTX-only logic out of :class:`~isaaclab.sensors.camera.Camera` into :class:`~isaaclab_physx.renderers.IsaacRtxRenderer`. Deprecated ^^^^^^^^^^ * Deprecated RTX-flavored fields on :class:`~isaaclab.sensors.camera.CameraCfg` (``semantic_filter``, ``colorize_semantic_segmentation``, ``colorize_instance_segmentation``, ``colorize_instance_id_segmentation``, ``semantic_segmentation_mapping``, ``depth_clipping_behavior``); set them on :attr:`~isaaclab.sensors.camera.CameraCfg.renderer_cfg` instead. 4.6.21 (2026-04-27) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed ProxyArray migration guidance and static regression checks to cover deprecated ``wp.to_torch(proxy_array)`` usage and direct tensor/wp.array method calls on data properties. 4.6.20 (2026-04-27) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :func:`~isaaclab.utils.checked_apply` for forwarding declared fields from an Isaac Lab configclass onto an external dataclass (typically an upstream library config object). Raises :class:`AttributeError` if the target is missing a declared field, so upstream renames surface at startup instead of as silent no-ops. * Added an opt-in runtime detector on :class:`~isaaclab.utils.warp.ProxyArray` that emits a :class:`UserWarning` with the call site (``stacklevel=2``) on every ``.torch`` read of a ``wp.quatf``-typed array when the ``WARN_ON_TORCH_QUATF_ACCESS`` environment variable is set to ``"1"``. Helps users find code that still assumes Isaac Lab 2.x's ``(w, x, y, z)`` quaternion convention after the migration to Isaac Lab 3.x's ``(x, y, z, w)`` convention. Documented in the Isaac Lab 3.0 migration guide as a complement to the source-level quaternion finder tool. 4.6.19 (2026-04-27) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Marked :meth:`~isaaclab.envs.manager_based_rl_mimic_env.ManagerBasedRLMimicEnv.get_subtask_start_signals` and :meth:`~isaaclab.envs.manager_based_rl_mimic_env.ManagerBasedRLMimicEnv.get_subtask_term_signals` with ``@optional_method``. 4.6.18 (2026-04-27) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updated the :class:`~isaaclab.cloner.TemplateCloneCfg` docstring example to import ``get_current_stage`` from :mod:`isaaclab.sim.utils.stage` instead of ``isaacsim.core.experimental.utils.stage``, aligning with the Isaac Lab API. * Added a "Migration off Deprecated Isaac Sim APIs" section to the Isaac Lab 3.0 migration guide (``docs/source/migration/migrating_to_isaaclab_3-0.rst``) that maps deprecated ``isaacsim.core.*`` paths to their recommended replacements, preferring Isaac Lab in-tree APIs (``isaaclab.sim.utils.*``, :class:`~isaaclab.sim.views.FrameView`, :mod:`~isaaclab.cloner`) over the ``isaacsim.core.experimental.*`` fallbacks where an Isaac Lab API exists. Fixed ^^^^^ * Fixed :class:`~isaaclab.envs.mdp.randomize_visual_color` and :class:`~isaaclab.envs.mdp.randomize_visual_texture` failing with ``'rtx::neuraylib::MdlModuleId' for '' is Invalid`` on Replicator >= 1.13.0. Kit's ``omni_usd_resolver`` intentionally returns an empty string when resolving builtin MDL short-names such as ``OmniPBR.mdl`` (``OMNI_USD_RESOLVER_MDL_BUILTIN_BYPASS=1``), but Replicator's ``create_sdf_spec_material`` now passes that empty resolved path directly into ``UsdMdl.RegistryUtils.GetSubIdentifiersForAsset``. The fix pre-resolves the absolute on-disk path via ``carb.tokens`` (``${kit}/mdl/core/Base/OmniPBR.mdl``) before handing it to Replicator so the resolver returns a valid path. 4.6.17 (2026-04-27) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updated cross-backend asset interface tests to import :class:`~isaaclab_physx.physics.PhysxManager` (aliased as ``SimulationManager``) instead of ``isaacsim.core.simulation_manager.SimulationManager``. * Stopped registering deprecated Isaac Sim extension search paths in Isaac Lab Kit experiences and switched explicit Isaac Sim extension dependencies to non-deprecated ``isaacsim.core.experimental.*``, ``isaacsim.robot.experimental.wheeled_robots``, ``isaacsim.robot.wheeled_robots.nodes``, and ``isaacsim.sensors.experimental.*`` equivalents. * Migrated remaining Isaac Lab imports off deprecated Isaac Sim core utility/prim Python module paths to their ``isaacsim.core.experimental.*`` replacements. Fixed ^^^^^ * Fixed ``isaaclab.sh --install`` leaving ``pinocchio`` uninstalled on top of recent Isaac Sim base images that preinstall ``pin-pink`` in the kit's bundled ``site-packages`` without its ``pin`` (cmeel pinocchio) dependency. Pip treats the ``pin-pink`` requirement as already satisfied and skips the transitive ``pin`` resolve, so the pink IK controller and its tests fail to import. ``isaaclab.cli.commands.install`` now probes ``import pinocchio`` after installing the Isaac Lab submodules and force-reinstalls the cmeel ``pin``/``pin-pink``/ ``daqp`` stack when the probe fails. Removed ^^^^^^^ * Retired several ``source/isaaclab/test/deps/isaacsim`` standalone reproducers that depended on deprecated Isaac Sim core extensions; use :mod:`isaaclab.sim` and ``isaacsim.core.experimental.*`` for similar debugging workflows. 4.6.16 (2026-04-24) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Renamed the ``TorchArray`` wrapper to :class:`~isaaclab.utils.warp.ProxyArray` and its module from ``isaaclab.utils.warp.torch_array`` to ``isaaclab.utils.warp.proxy_array``. The new name better describes the class as a proxy around a :class:`wp.array` exposing both ``.warp`` and ``.torch`` accessors, rather than a torch-first type. No backward-compatibility alias — downstream code must update imports and type hints. Removed ^^^^^^^ * Removed :meth:`~isaaclab.utils.warp.ProxyArray.rebind`. ``ProxyArray`` instances are now immutable after construction: assigning to any attribute other than the internal ``_torch_cache`` raises :class:`AttributeError`. Call sites that previously rebound a sim-bound wrapper (Newton / PhysX asset data classes when the solver re-creates its arrays) now assign a fresh ``ProxyArray(new_buf)`` instead. The old pattern was unsafe — callers holding a stale ``.torch`` reference read the old memory silently after ``rebind``. Forcing a new wrapper per rebind makes the stale-reference hazard local and explicit. .. code-block:: python # Before (4.6.15) self._joint_pos_ta.rebind(self._sim_bind_joint_pos) # After (4.6.16) self._joint_pos_ta = ProxyArray(self._sim_bind_joint_pos) 4.6.15 (2026-04-24) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * :meth:`~isaaclab.sim.views.BaseFrameView.get_world_poses` and :meth:`~isaaclab.sim.views.BaseFrameView.get_local_poses` now return a pair of :class:`~isaaclab.utils.warp.ProxyArray` wrappers instead of raw ``wp.array``. :class:`~isaaclab.sim.views.UsdFrameView`, :class:`~isaaclab_physx.sim.views.FabricFrameView`, and :class:`~isaaclab_newton.sim.views.NewtonSiteFrameView` were updated accordingly. Calls without ``indices`` reuse a cached ProxyArray wrapping the backend's stable buffer (Fabric/Newton); calls with ``indices`` and all calls on USD construct a fresh ProxyArray per invocation. **Breaking change** — call sites that wrapped the return in ``wp.to_torch(...)`` or passed the result directly to a kernel must migrate: .. code-block:: python # Before (4.6.14) pos_wp, quat_wp = view.get_world_poses(indices) tensor = wp.to_torch(pos_wp) # After (4.6.15) pos_w, quat_w = view.get_world_poses(indices) tensor = pos_w.torch # ... and when passing to a warp kernel: wp.launch(..., inputs=[pos_w.warp, ...]) 4.6.14 (2026-04-24) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * :class:`~isaaclab.sensors.RayCasterData` and :class:`~isaaclab.sensors.MultiMeshRayCasterData` properties :attr:`~isaaclab.sensors.RayCasterData.pos_w`, :attr:`~isaaclab.sensors.RayCasterData.quat_w`, and :attr:`~isaaclab.sensors.RayCasterData.ray_hits_w` now return :class:`~isaaclab.utils.warp.ProxyArray` instead of raw ``wp.array``. Use ``.torch`` for a cached zero-copy ``torch.Tensor`` view or ``.warp`` for the underlying ``wp.array``. **Breaking change** — call sites that previously wrapped these in ``wp.to_torch(...)`` must migrate to the ``.torch`` accessor: .. code-block:: python # Before (4.6.13) hits = wp.to_torch(sensor.data.ray_hits_w) # After (4.6.14) hits = sensor.data.ray_hits_w.torch 4.6.13 (2026-04-23) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.utils.warp.ProxyArray`, a warp-first dual-access array that provides explicit ``.torch`` and ``.warp`` accessors for seamless interoperability between warp and PyTorch workflows. Changed ^^^^^^^ * All properties on the following base data classes now return :class:`~isaaclab.utils.warp.ProxyArray` instead of raw ``wp.array``: :class:`~isaaclab.assets.articulation.BaseArticulationData`, :class:`~isaaclab.assets.rigid_object.BaseRigidObjectData`, :class:`~isaaclab.assets.rigid_object_collection.BaseRigidObjectCollectionData`, :class:`~isaaclab.sensors.contact_sensor.BaseContactSensorData`, :class:`~isaaclab.sensors.frame_transformer.BaseFrameTransformerData`, :class:`~isaaclab.sensors.imu.BaseImuData`, and :class:`~isaaclab.sensors.pva.BasePvaData`. Use ``.torch`` for a cached zero-copy ``torch.Tensor`` view, or ``.warp`` for the underlying ``wp.array``. Implicit torch operations (arithmetic, ``torch.*`` functions) work during the deprecation period but emit a warning. 4.6.12 (2026-04-23) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added caching to :func:`~isaaclab.utils.string.resolve_matching_names`, avoiding repeated regex matching across ``find_bodies``, ``find_joints``, and related calls. 4.6.11 (2026-04-22) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed :class:`~isaaclab.sensors.RayCaster` to spawn its own non-physics Xform prim via the new :attr:`~isaaclab.sensors.RayCasterCfg.spawn` attribute. ``prim_path`` should now point to a child under the parent link (e.g. ``{ENV_REGEX_NS}/Robot/base/raycaster``). * Renamed :class:`~isaaclab.sim.views.XformPrimView` to :class:`~isaaclab.sim.views.FrameView`, ``BaseXformPrimView`` to :class:`~isaaclab.sim.views.BaseFrameView`, and ``UsdXformPrimView`` to :class:`~isaaclab.sim.views.UsdFrameView`. ``XformPrimView`` is kept as a deprecated alias. * Moved :class:`~isaaclab.sensors.RayCasterCfg` offset into the spawned prim's local transform instead of applying it at runtime. The :class:`~isaaclab.sim.views.FrameView` world pose now includes the offset directly. * Unified sensor prim path resolution in :class:`~isaaclab.sensors.SensorBase`. When ``prim_path`` points at a physics body and a spawner is configured, a child prim is automatically created underneath. Deprecated ^^^^^^^^^^ * Deprecated passing a ``prim_path`` with ``ArticulationRootAPI`` or ``RigidBodyAPI`` to :class:`~isaaclab.sensors.RayCasterCfg`. The path is automatically extended with ``/raycaster``; users should migrate to the child-path convention. Removed ^^^^^^^ * Removed :attr:`~isaaclab.sensors.RayCasterCfg.attach_yaw_only` (deprecated since 2.1.1). Use ``ray_alignment="yaw"`` or ``ray_alignment="base"`` instead. 4.6.10 (2026-04-22) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :meth:`~isaaclab.utils.wrench_composer.WrenchComposer.add_raw_buffers_from` to merge one composer's raw input buffers into another. * Added ``render_enabled`` property to all environment base classes (:class:`~isaaclab.envs.ManagerBasedEnv`, :class:`~isaaclab.envs.ManagerBasedRLEnv`, :class:`~isaaclab.envs.DirectRLEnv`, :class:`~isaaclab.envs.DirectMARLEnv`). Setting ``env.render_enabled = False`` before calling ``step()`` skips the Kit app loop (``app.update()``) and camera/RTX sensor rendering, while standalone visualizers (Newton, Rerun, Viser) continue to update normally. Kit bundles camera rendering with its app loop so the two cannot be separated; non-Kit visualizers have independent ``step()`` methods and are unaffected by this flag. Post-reset re-renders for RTX sensors are also skipped when disabled. The property can be toggled between steps for per-step control. Defaults to ``True`` for full backward compatibility. * Added ``skip_app_pumping`` parameter to :meth:`~isaaclab.sim.SimulationContext.render` and :meth:`~isaaclab.sim.SimulationContext.update_visualizers` to selectively skip visualizers that pump the Kit app loop (``pumps_app_update() == True``). Changed ^^^^^^^ * Refactored :class:`~isaaclab.utils.wrench_composer.WrenchComposer` to a dual-buffer architecture with separate global (world-frame) and local (body-frame) buffers. A new :meth:`~isaaclab.utils.wrench_composer.WrenchComposer.compose_to_body_frame` method rotates global forces/torques into the body frame at apply time using the current body orientation, then sums with local forces/torques. * Updated imports of the PhysX tensors API in the ray caster sensors from ``omni.physics.tensors.impl.api`` to ``omni.physics.tensors.api`` to track the upstream Isaac Sim module relocation (the ``impl`` submodule was removed). Deprecated ^^^^^^^^^^ * Deprecated :attr:`~isaaclab.utils.wrench_composer.WrenchComposer.composed_force` and :attr:`~isaaclab.utils.wrench_composer.WrenchComposer.composed_torque` in favor of :attr:`~isaaclab.utils.wrench_composer.WrenchComposer.out_force_b` and :attr:`~isaaclab.utils.wrench_composer.WrenchComposer.out_torque_b`. Fixed ^^^^^ * Fixed :class:`~isaaclab.utils.wrench_composer.WrenchComposer` not correctly updating the composed torque from global positional forces when the body moves. * Fixed :meth:`~isaaclab.utils.wrench_composer.WrenchComposer.reset` not clearing the ``_active`` flag when called with ``slice(None)``. * Fixed :class:`~isaaclab.utils.wrench_composer.WrenchComposer` producing spurious torque when global forces are applied without explicit positions. * Fixed ``set_external_force_and_torque`` wiping forces from non-resetting environments during partial episode resets by using ``reset(env_ids)`` + ``add_forces_and_torques`` instead of ``set_forces_and_torques``. 4.6.9 (2026-04-22) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Converted all four ray caster sensor classes (:class:`~isaaclab.sensors.RayCaster`, :class:`~isaaclab.sensors.RayCasterCamera`, :class:`~isaaclab.sensors.MultiMeshRayCaster`, :class:`~isaaclab.sensors.MultiMeshRayCasterCamera`) to launch Warp kernels directly via ``wp.launch`` instead of going through Python-level torch wrappers. A new :mod:`~isaaclab.sensors.ray_caster.kernels` module contains all sensor-specific kernels. All intermediate ray buffers are now Warp-owned with zero-copy torch views, eliminating per-step allocations. The existing :func:`~isaaclab.utils.warp.kernels.raycast_dynamic_meshes_kernel` gained an ``env_mask`` parameter to support partial environment updates natively. A new :func:`~isaaclab.utils.warp.kernels.raycast_mesh_masked_kernel` was added to :mod:`~isaaclab.utils.warp.kernels` as the general-purpose masked single-mesh variant, with ``return_distance`` and ``return_normal`` flags matching the design of :func:`~isaaclab.utils.warp.kernels.raycast_mesh_kernel`. **Breaking change** — :attr:`~isaaclab.sensors.RayCasterData.pos_w`, :attr:`~isaaclab.sensors.RayCasterData.quat_w`, and :attr:`~isaaclab.sensors.RayCasterData.ray_hits_w` now return :class:`wp.array` instead of :class:`torch.Tensor`. Call-sites that previously accessed these as tensors must wrap the result with :func:`wp.to_torch`: .. code-block:: python # Before hits = sensor.data.ray_hits_w # torch.Tensor (old) # After hits = wp.to_torch(sensor.data.ray_hits_w) # torch.Tensor (zero-copy view) * Changed the :attr:`~isaaclab.sensors.RayCaster.meshes` class variable cache key from ``prim_path`` to a ``(prim_path, device)`` tuple so that meshes built on one device (e.g. CPU) are not reused by a sensor running on another device (e.g. CUDA). **Breaking change** — callers that read or write :attr:`~isaaclab.sensors.RayCaster.meshes` directly must update the key: .. code-block:: python # Before wp_mesh = RayCaster.meshes[prim_path] # After wp_mesh = RayCaster.meshes[(prim_path, device)] Fixed ^^^^^ * Fixed frame composition in :meth:`~isaaclab.sensors.MultiMeshRayCaster._update_mesh_transforms` which used simple subtraction instead of proper frame decomposition when applying mesh offsets. With non-identity orientation offsets, tracked mesh positions were incorrect, causing raycasts to miss or hit wrong surfaces. The method now uses :func:`~isaaclab.utils.math.combine_frame_transforms`. 4.6.8 (2026-04-21) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Pinned ``mujoco`` and ``mujoco-warp`` to ``3.6.0`` to align with the Newton library. 4.6.7 (2026-04-20) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :func:`~isaaclab.sim.utils.newton_model_utils.replace_newton_shape_colors` to align Newton ``shape_color`` with authored USD where OmniPBR inputs or ``primvars:displayColor`` apply. Set ``ISAACLAB_REPLACE_NEWTON_SHAPE_COLORS`` to ``0``, ``false``, ``off``, or ``no`` to disable the pass; the function emits a ``FutureWarning`` because this path is temporary until neutral USD materials replace OmniPBR in content. * Added ``test_newton_model_utils`` tests for the Newton shape color pass. Fixed ^^^^^ * Fixed nondeterministic environment replication when cloning from a template by sorting prototype roots before building the clone plan in :func:`~isaaclab.cloner.cloner_utils.clone_from_template`, keeping downstream order stable across simulation and visualization backends. 4.6.6 (2026-04-17) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed the way the python interpreter is called from ``isaaclab.sh`` to allow error codes to bubble up to the process level. 4.6.5 (2026-04-16) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed flaky ``test_first_frame_is_textured_camera`` by removing warmup-step workaround and relying on the renderer's streaming wait instead. 4.6.4 (2026-04-16) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed Newton viewer compatibility by restricting ``pyglet`` to ``<3``. 4.6.3 (2026-04-16) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed :class:`~isaaclab.sensors.imu.Imu` and :class:`~isaaclab.sensors.imu.ImuData` factory type annotations to include the Newton IMU backend types. 4.6.2 (2026-04-14) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.sim.spawners.meshes.MeshSquareCfg` and :func:`~isaaclab.sim.spawners.meshes.spawn_mesh_square` for spawning 2D triangle mesh grids, used as surface deformable bodies (cloth). * Added physics material support to :func:`~isaaclab.sim.spawners.from_files.spawn_from_usd` for deformable bodies loaded from USD files. * Added wheel builder installation CI tests that verify the isaaclab wheel builds, installs, and imports correctly in a clean uv environment. Changed ^^^^^^^ * Moved :class:`DeformableBodyPropertiesCfg`, :class:`DeformableBodyMaterialCfg`, and :class:`DeformableObjectSpawnerCfg` from ``isaaclab`` to ``isaaclab_physx``. These are PhysX-specific and are now imported from ``isaaclab_physx.sim.schemas``, ``isaaclab_physx.sim.spawners.materials``, and ``isaaclab_physx.sim.spawners.spawner_cfg`` respectively. * Changed deformable body property and material application in mesh and USD spawners to use ``isaaclab_physx.sim.schemas`` instead of ``isaaclab.sim.schemas``. * Changed :func:`~isaaclab.sim.spawners.from_files.spawn_from_usd` to call ``define_deformable_body_properties`` when the deformable body API is not yet present on the prim, instead of always calling ``modify_deformable_body_properties``. Removed ^^^^^^^ * Removed :func:`define_deformable_body_properties` and :func:`modify_deformable_body_properties` from ``isaaclab.sim.schemas``. Use ``isaaclab_physx.sim.schemas`` instead. * Removed :class:`DeformableBodyPropertiesCfg` from ``isaaclab.sim.schemas``. Use :class:`isaaclab_physx.sim.schemas.DeformableBodyPropertiesCfg` instead. * Removed :class:`DeformableBodyMaterialCfg` and :func:`spawn_deformable_body_material` from ``isaaclab.sim.spawners.materials``. Use ``isaaclab_physx.sim.spawners.materials`` instead. * Removed :class:`DeformableObjectSpawnerCfg` from ``isaaclab.sim.spawners``. Use ``isaaclab_physx.sim.spawners.spawner_cfg.DeformableObjectSpawnerCfg`` instead. 4.6.1 (2026-04-14) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`~isaaclab.sim.schemas.JointDrivePropertiesCfg.ensure_drives_exist` flag to :class:`~isaaclab.sim.schemas.JointDrivePropertiesCfg`. When enabled, joints with zero stiffness and damping receive a minimal stiffness so that backends like Newton recognise the drive as active. 4.6.0 (2026-04-13) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Unified :class:`~isaaclab.sensors.camera.Camera` and :class:`~isaaclab.sensors.camera.TiledCamera` into a single implementation. :class:`Camera` now delegates all rendering to the :class:`~isaaclab.renderers.Renderer` abstraction (same approach :class:`TiledCamera` used). The public API is unchanged for :class:`Camera` users. * **Breaking:** :attr:`~isaaclab.sensors.camera.CameraData.info` is now a flat ``dict[str, Any]`` keyed by data type (e.g. ``camera.data.info["semantic_segmentation"]``). The metadata is shared across all cameras and identical to what the underlying renderer returns. - **Camera users (old):** replace ``camera.data.info[cam_idx][data_type]`` with ``camera.data.info[data_type]``. - **TiledCamera users (old):** access pattern ``camera.data.info[data_type]`` is unchanged. * **Breaking:** :meth:`~isaaclab.renderers.BaseRenderer.write_output` has been replaced by :meth:`~isaaclab.renderers.BaseRenderer.read_output`. The new method receives the full :class:`~isaaclab.sensors.camera.CameraData` instance and iterates output types internally. Custom renderer implementations must replace ``write_output(render_data, output_name, output_data)`` with ``read_output(render_data, camera_data)``. Deprecated ^^^^^^^^^^ * :class:`~isaaclab.sensors.camera.TiledCamera` is deprecated. Use :class:`~isaaclab.sensors.camera.Camera` directly — it now supports all renderer backends. * :class:`~isaaclab.sensors.camera.TiledCameraCfg` is deprecated. Use :class:`~isaaclab.sensors.camera.CameraCfg` directly. Removed ^^^^^^^ * Removed :attr:`~isaaclab.sensors.camera.Camera.render_product_paths`. Render products are now managed internally by the renderer backend and are not part of the public API. 4.5.33 (2026-04-13) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.sensors.Pva` (Pose Velocity Acceleration) sensor, renamed from the former ``Imu`` to better reflect its full output: pose, velocity, and acceleration. * Added :class:`~isaaclab.sensors.Imu` sensor that models a real inertial measurement unit, providing only angular velocity (gyroscope) and linear acceleration (accelerometer) in the sensor's body frame. * Added :func:`~isaaclab.envs.mdp.observations.pva_orientation` and :func:`~isaaclab.envs.mdp.observations.pva_projected_gravity` observation functions for the PVA sensor. Changed ^^^^^^^ * Changed ``isaaclab.sensors.Imu`` to refer to a new lightweight IMU sensor that only provides angular velocity and linear acceleration. The old ``Imu``, ``ImuCfg``, ``ImuData``, ``BaseImu``, and ``BaseImuData`` names now refer to this new sensor. For the original full-featured sensor, use :class:`~isaaclab.sensors.Pva`, :class:`~isaaclab.sensors.PvaCfg`, etc. Removed ^^^^^^^ * Removed ``gravity_bias`` configuration parameter from :class:`~isaaclab.sensors.PvaCfg`. The PVA sensor now always reports raw kinematic acceleration without gravity contribution. * Removed ``gravity_bias`` and ``visualizer_cfg`` configuration parameters from :class:`~isaaclab.sensors.ImuCfg`. The IMU sensor now unconditionally includes gravity in its accelerometer readings, matching real hardware behavior. The gravity vector is queried from the simulation automatically. * Removed ``imu_orientation`` and ``imu_projected_gravity`` observation functions. Use :func:`~isaaclab.envs.mdp.observations.pva_orientation` and :func:`~isaaclab.envs.mdp.observations.pva_projected_gravity` instead. 4.5.32 (2026-04-13) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :class:`~isaaclab.envs.mdp.events.randomize_actuator_gains` producing zero stiffness and damping for explicit actuators. The default gains were read from ``asset.data.joint_stiffness``, which is zeroed out at the sim level for explicit actuator models. The defaults are now patched with the actual actuator PD gains. 4.5.31 (2026-04-13) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.envs.mdp.randomize_rigid_body_inertia` event term for randomizing body inertia tensors independently of mass. Supports diagonal-only (Ixx, Iyy, Izz) and full 3x3 modes. Changed ^^^^^^^ * Split :class:`~isaaclab.envs.mdp.randomize_rigid_body_material` into backend-specific implementations. PhysX uses bucket-based 3-tuple materials via the tensor API; Newton samples friction and restitution continuously per shape via view-level attribute bindings. * Converted ``randomize_rigid_body_com`` from a plain function to a :class:`~isaaclab.managers.ManagerTermBase` class with repeatable randomization from cached defaults. Newton passes position-only (vec3); PhysX passes full pose (pos + quat). * Converted ``randomize_rigid_body_collider_offsets`` from a plain function to a :class:`~isaaclab.managers.ManagerTermBase` class with backend-specific implementations. PhysX uses rest/contact offsets directly; Newton maps them to ``shape_margin`` and ``shape_gap``. 4.5.30 (2026-04-13) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :func:`~isaaclab.utils.warp.math_ops.transform_to_vec_quat` utility for zero-copy splitting of ``wp.transformf`` arrays into ``vec3f`` and ``quatf`` views. 4.5.29 (2026-04-10) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added flag to toggle dataset compression in RecorderManager and dataset file handler. Changed ^^^^^^^ * Changed RecorderManager to clone value tensors before adding to episode data, removing multiple clones in ``episodes.add()`` and replacing with a single clone. 4.5.28 (2026-04-10) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :meth:`~isaaclab.physics.PhysicsManager.wait_for_playing` hook and integrated it into :meth:`~isaaclab.sim.SimulationContext.step` so the training loop blocks while the Kit GUI timeline is paused. 4.5.27 (2026-04-08) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.sim.views.BaseXformPrimView` abstract base class that defines the common interface for backend-specific ``XformPrimView`` implementations. * Added :class:`~isaaclab.sim.views.XformPrimView` factory to instantiate the correct backend-specific ``XformPrimView`` based on the active simulation backend. Changed ^^^^^^^ * Refactored :class:`~isaaclab.sim.views.XformPrimView` to delegate backend-specific logic to :class:`~isaaclab_physx.sim.views.FabricXformPrimView` and :class:`~isaaclab_newton.sim.views.NewtonSiteXformPrimView`. The public API is unchanged; use :class:`~isaaclab.sim.views.XformPrimView` for backend-aware instantiation. * Added release version to :class:`~isaaclab.test.benchmark.recorders.VersionInfoRecorder` output. 4.5.26 (2026-04-08) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed ``SummaryMetrics`` backend to dynamically render unknown benchmark phases. Previously only hard-coded phase names (``startup``, ``runtime``, ``train``, ``frametime``) were printed in the summary report; any other phases were silently dropped. Unknown phases now render their ``SingleMeasurement`` and ``StatisticalMeasurement`` entries automatically. 4.5.25 (2026-04-01) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added app launcher initialization marker to app launcher for auto hanging detection. 4.5.24 (2026-03-25) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for absolute named imports (``from pkg import a, b``) in ``.pyi`` stubs processed by :func:`~isaaclab.utils.module.lazy_export`. Previously only relative imports and absolute wildcard fallbacks were handled; explicit names from absolute packages are now eagerly resolved and re-exported. Fixed ^^^^^ * Fixed incorrect mass matrix and gravity compensation force indexing for floating-base robots in :class:`~isaaclab.envs.mdp.actions.OperationalSpaceControllerAction`. The method ``_compute_dynamic_quantities()`` used ``self._joint_ids`` to index into PhysX generalized quantities, which does not account for the 6 virtual base DOFs prepended by PhysX for floating-base articulations. Replaced with ``self._jacobi_joint_idx`` which correctly applies the +6 offset for floating-base robots and is identical to ``self._joint_ids`` for fixed-base robots. 4.5.23 (2026-03-16) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed flaky tests in ``test_mock_data_properties`` caused by use-after-free in mock asset data properties. Warp view properties (e.g. :attr:`root_com_lin_vel_w`) created pointer aliases into locally-scoped temporary arrays; when those temporaries were freed by CPython's reference counter before the view was consumed, subsequent reads produced garbage. Fixed by caching default arrays in the backing attribute (``self._root_link_vel_w``, ``self._root_com_vel_w``, ``self._body_com_vel_w``, etc.) so the backing memory remains alive for the lifetime of the mock object. 4.5.22 (2026-03-16) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed multi-GPU distributed training segfault in :func:`~isaaclab.sim.spawners.from_files.spawn_from_usd` caused by concurrent USD asset downloads and ``Sdf_CrateFile::_MmapStream::Read`` mmap races. When ``LOCAL_WORLD_SIZE > 1``, the download and stage composition are now serialized with an ``fcntl`` file lock. 4.5.21 (2026-03-13) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :meth:`~isaaclab.sim.SimulationContext.initialize_visualizers` silently swallowing failures when visualizers were explicitly requested via the ``--visualizer`` CLI flag. Unknown visualizer types and missing packages were not caught because they failed during config resolution, before the create/initialize loop. A ``RuntimeError`` is now raised for any explicitly requested visualizer that cannot be configured or initialized. 4.5.20 (2026-03-13) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Removed verbose ``logger.info`` and ``logger.debug`` calls from :class:`~isaaclab.managers.ManagerBase` term initialization and entity resolution, :func:`~isaaclab.sim.schemas.activate_contact_sensors` contact report setup, and :class:`~isaaclab.sim.views.XformPrimView` Fabric detection. These messages added noise to logs without actionable information. 4.5.19 (2026-03-11) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :class:`~isaaclab.sim.views.XFormPrimView` crashing on multi-GPU setups (``cuda:1`` and higher) when Fabric mode is enabled. USDRT ``SelectPrims`` and Warp fabric arrays only support ``cuda:0`` internally — ``SelectPrims`` raises a C++ error when the active CUDA context is not GPU 0, regardless of the ``device`` argument. The fix disables Fabric and falls back to USD operations when ``self._device`` is not ``cuda:0``. Additionally fixed device mismatches in the Fabric methods where Warp arrays were allocated on ``self._device`` but kernel launches targeted ``_fabric_device`` (``cuda:0``). 4.5.18 (2026-03-11) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added reward convergence checking to benchmark scripts. New ``--check_convergence`` flag loads thresholds from ``configs.yaml`` automatically. Also accepts ``--reward_threshold`` for manual override and ``--convergence_config`` to select config section (default: ``full``). Adds ``check_convergence()`` and ``log_convergence()`` to benchmark utils. 4.5.17 (2026-03-11) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed simulation hanging on exit by removing the prim-by-prim ``clear_stage()`` call from :meth:`~isaaclab.sim.SimulationContext.clear_instance`. The subsequent :func:`~isaaclab.sim.utils.close_stage` and app shutdown already tear down the entire stage, making the per-prim deletion redundant and slow. * Fixed ``close_stage()`` ordering so that Kit's USD context is closed before the stage cache is cleared, preventing the ``Removal of UsdStage from cache failed`` error. 4.5.16 (2026-03-10) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed "[Error] [omni.usd] Stage opening or closing already in progress" on shutdown when running with Kit: ``env.close()`` already closes the stage, so the redundant explicit :func:`~isaaclab.sim.utils.stage.close_stage` calls in the scripts were removed; :meth:`~isaaclab.sim.SimulationContext.clear_instance` (invoked by ``env.close()``) already closes the stage, so the duplicate calls in the shutdown block triggered the error. 4.5.15 (2026-03-10) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed semantic label warnings (``OgnSdSemanticLabelsMap: invalid input AOV``) by restoring standard ``SemanticsLabelsAPI`` usage in :func:`~isaaclab.sim.utils.prims.clone`. 4.5.14 (2026-03-10) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``validate_config`` hook to :func:`~isaaclab.utils.configclass`. Configclass subclasses can now override ``validate_config(self)`` to perform domain-specific validation that runs automatically as part of :func:`_validate`. Fixed ^^^^^ * Fixed ``SimulationContext`` singleton leak when environment ``__init__`` fails after creating the context. :class:`~isaaclab.envs.DirectRLEnv`, :class:`~isaaclab.envs.DirectMARLEnv`, and :class:`~isaaclab.envs.ManagerBasedEnv` now call ``clear_instance()`` on the context when initialization raises, preventing cascading "Simulation context already exists" errors in test suites and training loops. 4.5.13 (2026-03-10) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added recursive resolution of nested :class:`~isaaclab.managers.ManagerTermBaseCfg` inside :meth:`~isaaclab.managers.ManagerBase._resolve_param_value` so that ``params`` containing manager term configs in dicts or lists have their ``func`` references and class-based managers resolved automatically. 4.5.12 (2026-03-10) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Unified :class:`~isaaclab.envs.mdp.randomize_physics_scene_gravity` into a single class-based term that auto-detects the active physics backend (PhysX or Newton). Removed ^^^^^^^ * Removed ``randomize_newton_physics_scene_gravity``. Use :class:`~isaaclab.envs.mdp.randomize_physics_scene_gravity` instead, which handles both PhysX and Newton backends automatically. 4.5.11 (2026-02-28) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``visualizers`` parameter to ``build_simulation_context()``. 4.5.10 (2026-03-09) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Refactored :func:`~isaaclab.utils.module.lazy_export` to infer fallback packages and relative wildcard re-exports from the ``.pyi`` stub, making the stub the single source of truth. The ``packages`` argument is deprecated. 4.5.9 (2026-03-08) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * :mod:`isaaclab_ov` is now always installed when using ``./isaaclab.sh -i`` (or ``--install all``), but with ``--no-deps`` so it is importable (e.g. by :mod:`isaaclab_tasks` presets) without pulling in the optional ``ovrtx`` dependency. To install the ovrtx dependency for OVRTX rendering, run ``./isaaclab.sh -i ovrtx``. 4.5.8 (2026-03-06) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``debugpy`` to :mod:`isaaclab` package dependencies to support debugging out of the box. 4.5.7 (2026-03-06) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Extended ``test_articulation_iface.py`` with Newton backend mock tests — added Newton-specific mock view setup, sim config, and test parametrization alongside existing PhysX tests. * Extended ``test_rigid_object_iface.py`` with Newton backend mock tests — added Newton-specific mock view setup and test parametrization. * Fixed mask type handling in ``test_rigid_object_collection_iface.py`` to use consistent mask types across backends. 4.5.6 (2026-03-06) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Reorganized Visualizers and SDP packages * Added Visualizer unit tests * Improved PhysX Scene Data Provider perf * Tweaked default Visualizer Configs 4.5.5 (2026-03-05) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added documentation for :class:`~isaaclab.renderers.BaseRenderer` and the renderer extension architecture in ``docs/source/overview/core-concepts/renderers.rst``, including the factory pattern. 4.5.4 (2026-03-01) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Enhanced :class:`~isaaclab.utils.timer.Timer` with configurable time format (``s``/``ms``/``us``/``ns``), global enable/disable toggle, display output control, and ``wp.synchronize()`` before stopping to ensure accurate GPU timing. 4.5.3 (2026-03-05) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Passed ``default_env_origins`` to the Newton replication pipeline so environment offsets to adapt new newton cloning logic. 4.5.2 (2026-03-04) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.test.benchmark.backends.SummaryMetrics` backend for benchmarks: prints a human-readable boxed summary to the console while still writing full JSON output. Use ``--benchmark_backend summary`` in benchmark scripts. Fixed ^^^^^ * Fixed runtime stats in benchmark scripts so FPS metrics (e.g. Collection FPS, Total FPS) are labeled with unit "FPS" instead of "ms". Unit is now inferred from the me name in ``log_min_max_mean_stats`` (benchmark utils). * Enabled frametime recorders for the ``omniperf`` backend in benchmark scripts to preserve Grafana metrics ingestion. 4.5.1 (2026-03-02) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added interface-conformance test suites that verify data property shapes/dtypes, writer methods, setters, and alias consistency across Mock and PhysX backends: - ``test/assets/test_articulation_iface.py`` for :class:`~isaaclab.assets.BaseArticulation`. - ``test/assets/test_rigid_object_iface.py`` for :class:`~isaaclab.assets.BaseRigidObject`. - ``test/assets/test_rigid_object_collection_iface.py`` for :class:`~isaaclab.assets.BaseRigidObjectCollection`. Fixed ^^^^^ * Fixed structured warp types in ``MockArticulationData``, ``MockRigidObjectData``, and ``MockRigidObjectCollectionData``: velocity, acceleration, and limit properties now return the correct structured dtypes (``wp.spatial_vectorf``, ``wp.vec2f``, etc.) and sliced velocity properties use zero-copy pointer arithmetic instead of torch-based slicing, matching the PhysX backend contract. * Added shape and dtype validation to all ``_index`` / ``_mask`` writer methods in ``MockArticulation``, ``MockRigidObject``, and ``MockRigidObjectCollection``, replacing bare ``pass`` stubs. * Fixed ``set_coms_index`` / ``set_coms_mask`` docstrings in :class:`~isaaclab.assets.BaseArticulation` to document the correct dtype (``wp.transformf``) and frame of reference (body link frame). * Fixed XR instruction widget for Fabric and switch to current scene view APIs. * Fixed session lifecycle pre-shutdown by removing invalid unsubscribe() call. 4.5.0 (2026-02-27) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Replaced ``omni.kit.commands`` and async Nucleus calls in asset utilities, prim helpers. 4.4.0 (2026-02-26) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Migrated lazy-loading to ``lazy_loader.attach_stub`` with ``.pyi`` stubs as the single source of truth for module exports. Removed the old ``attach_cascading`` helper, avoided eager callable resolution during deepcopy of :class:`~isaaclab.utils.string.ResolvableString`, and updated MDP exports/import boundaries so ``test_env_cfg_no_forbidden_imports.py`` passes without importing runtime modules. 4.3.2 (2026-02-25) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed inconsistent ``body_mass`` shape in :class:`~isaaclab.assets.BaseRigidObjectData` from ``(num_instances, 1, 1)`` to ``(num_instances, 1)`` to align with the articulation convention. * Unified inertia scaling in :func:`~isaaclab.envs.mdp.events.randomize_rigid_body_mass` to use a single code path for both articulations and rigid objects. Changed ^^^^^^^ * Reworked mock interfaces for assets and sensors to align with updated data shapes and remove stale convenience aliases. 4.3.1 (2026-02-27) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :meth:`~isaaclab.assets.AssetBase.assert_shape_and_dtype` and :meth:`~isaaclab.assets.AssetBase.assert_shape_and_dtype_mask` validation methods to :class:`~isaaclab.assets.AssetBase` for runtime shape and dtype checking of write method inputs. Checks are only active in debug mode (``__debug__``), adding zero overhead in optimized builds. Changed ^^^^^^^ * Fixed tendon setter signatures in :class:`~isaaclab.assets.BaseArticulation` (``set_fixed_tendon_*`` and ``set_spatial_tendon_*``) now accept ``float`` values in addition to tensors and warp arrays. 4.3.0 (2026-02-26) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added lazy callable-string resolution for config fields through :class:`~isaaclab.utils.string.ResolvableString` in :mod:`isaaclab.utils.configclass`. Config values such as ``class_type``/``func`` can now remain as strings until first use and then resolve/cached automatically. * Added ``{DIR}`` callable-string shorthand support in :mod:`isaaclab.utils.configclass` for config defaults. ``"{DIR}.module:Symbol"`` now expands to the declaring config module directory before resolution. * Updated :func:`~isaaclab.utils.dict.update_class_from_dict` to stop eagerly resolving callable strings during updates. Callable-string inputs are now preserved as lazy :class:`~isaaclab.utils.string.ResolvableString` values and resolve only on first use. 4.2.3 (2026-02-25) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :func:`~isaaclab.cloner.usd_replicate` and :func:`~isaaclab.cloner.physx_replicate` skipping ``Sdf.CopySpec`` when the source and destination paths are identical (self-copy), avoiding a redundant and potentially destructive USD spec overwrite. 4.2.2 (2026-02-26) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :meth:`~isaaclab.assets.AssetBase.assert_shape_and_dtype` and :meth:`~isaaclab.assets.AssetBase.assert_shape_and_dtype_mask` validation methods to :class:`~isaaclab.assets.AssetBase` for runtime shape and dtype checking of write method inputs. Checks are only active in debug mode (``__debug__``), adding zero overhead in optimized builds. Changed ^^^^^^^ * Fixed tendon setter signatures in :class:`~isaaclab.assets.BaseArticulation` (``set_fixed_tendon_*`` and ``set_spatial_tendon_*``) now accept ``float`` values in addition to tensors and warp arrays. 4.2.1 (2026-02-25) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Migrated all MDP action terms to use new ``_index`` write/set APIs with keyword-only arguments. * Migrated all MDP event terms to use new ``_index`` write/set APIs (mass, inertia, COM, joint properties, root state resets, fixed tendon parameters). * Updated ``InteractiveScene.set_state`` to use new ``_index`` APIs for root pose/velocity and joint state writes. * Updated ``SceneEntityCfg`` body resolution to use ``find_sensors``/``num_sensors`` for ContactSensor entities. 4.2.0 (2026-02-24) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Refined base asset class abstractions (:class:`~isaaclab.assets.BaseArticulation`, :class:`~isaaclab.assets.BaseRigidObject`) to better support multiple backends. Removed abstract method requirements that forced unnecessary boilerplate in backend implementations, making it easier to add new physics backends. * Unified docstrings across all base asset classes with precise shape and dtype annotations for warp array properties and write methods, ensuring consistent documentation between PhysX and Newton backend implementations. 4.1.0 (2026-02-18) ~~~~~~~~~~~~~~~~~~ Removed ^^^^^^^ * Removed hard dependency on the Isaac Sim Cloner for scene replication. Replication now uses internal utilities :func:`~isaaclab.scene.cloner.usd_replicate` and :func:`~isaaclab.scene.cloner.physx_replicate`, reducing coupling to Isaac Sim. Public APIs in :class:`~isaaclab.scene.interactive_scene.InteractiveScene` remain unchanged; code directly importing the external Cloner should migrate to these utilities. Added ^^^^^ * Added optional random prototype selection during environment cloning in :class:`~isaaclab.scene.interactive_scene.InteractiveScene` via :attr:`~isaaclab.scene.interactive_scene_cfg.InteractiveSceneCfg.random_heterogeneous_cloning`. Defaults to ``True``; round-robin (modulo) mapping remains available by setting it to ``False``. * Added flexible per-object cloning path in :class:`~isaaclab.scene.interactive_scene.InteractiveScene`: when environments are heterogeneous (different prototypes across envs), replication switches to per-object instead of whole-env cloning. This reduces PhysX cloning time in heterogeneous scenes. 4.0.0 (2026-02-22) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updated :class:`~isaaclab.sim.converters.MjcfConverter` and :class:`~isaaclab.sim.converters.MjcfConverterCfg` for the rewritten MJCF importer in Isaac Sim 5.0. The converter now uses the ``MJCFImporter`` / ``MJCFImporterConfig`` API backed by the ``mujoco-usd-converter`` library. The old settings ``fix_base``, ``link_density``, ``import_inertia_tensor``, ``import_sites``, and ``make_instanceable`` have been removed (handled automatically by the new converter). New settings ``merge_mesh``, ``collision_from_visuals``, and ``collision_type`` have been added. The ``convert_mjcf.py`` CLI tool has been updated accordingly. Note that the new importer produces assets with nested rigid bodies (``RigidBodyAPI`` applied per link) instead of a flat hierarchy. 3.5.3 (2026-02-22) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Refactored ``SimulationContext.clear_instance`` to delegate stage teardown to :func:`~isaaclab.sim.utils.close_stage` instead of manually clearing the stage cache, thread-local context, and Kit USD context inline. * Updated :func:`~isaaclab.sim.utils.close_stage` to also close the Kit USD context stage (``omni.usd.get_context().close_stage()``) when Kit is running, making it a complete stage teardown function. 3.5.2 (2026-02-23) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * ``NUCLEUS_ASSET_ROOT_DIR`` and derived Nucleus path constants are now parsed from ``apps/isaaclab.python.kit`` 3.5.1 (2026-02-21) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed ``omni.usd`` calls with pure USD (``pxr``) equivalents in sim utils and sensors. Deprecated ^^^^^^^^^^ * ``create_new_stage_in_memory`` — use ``create_new_stage`` instead. * ``is_stage_loading`` — Kit-only, no production callers. 3.5.0 (2026-02-21) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * The in-memory stage created with ``SimulationCfg(create_stage_in_memory=True)`` is now automatically attached to the USD context at :class:`~isaaclab.sim.SimulationContext` creation. This ensures proper stage lifecycle events for viewport and physics systems, preventing test isolation issues. 3.4.3 (2026-02-22) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Migrated settings access from ``carb.settings`` to :class:`~isaaclab.app.settings_manager.SettingsManager`. Application code and tests now use :func:`~isaaclab.app.settings_manager.get_settings_manager` or :meth:`~isaaclab.sim.SimulationContext.get_setting` / :meth:`~isaaclab.sim.SimulationContext.set_setting` instead of ``carb.settings.get_settings()``. 3.4.2 (2026-02-20) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Replaced PhysX schema interactions via ``pxr.PhysxSchema`` API helpers with direct prim schema apply/get calls. * Replaced ``omni.kit.commands.execute("ChangePropertyCommand")`` uses with direct ``CreateAttribute`` + ``Set`` calls. Removed ^^^^^^^ * Removed :func:`~isaaclab.sim.utils.attach_stage_to_usd_context`. This function is no longer needed since the in-memory stage is now automatically attached to the USD context at ``SimulationContext`` creation. Remove any calls to this function from your code. Fixed ^^^^^ * Fixed :func:`~isaaclab.sim.utils.add_labels` to use :class:`UsdSemantics.LabelsAPI` directly instead of the Replicator API for Isaac Sim 5.0+. This resolves ``'NoneType' object has no attribute 'GetEditTarget'`` errors when using stage-in-memory mode. 3.4.0 (2026-02-18) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Integrated TeleopCore as the teleoperation backend via the new :mod:`isaaclab_teleop` extension. The :class:`~isaaclab_teleop.IsaacTeleopDevice` provides a unified teleoperation interface that replaces the previous XR-specific device and retargeter classes. Deprecated ^^^^^^^^^^ * Deprecated the existing XR teleoperation solution. :class:`~isaaclab.devices.openxr.OpenXRDevice`, :class:`~isaaclab.devices.openxr.OpenXRDeviceCfg`, :class:`~isaaclab.devices.openxr.ManusVive`, :class:`~isaaclab.devices.RetargeterBase`, :class:`~isaaclab.devices.RetargeterCfg`, and all retargeters under :mod:`isaaclab.devices.openxr.retargeters` are deprecated in favor of :class:`~isaaclab_teleop.IsaacTeleopDevice`. Existing imports will continue to work but emit :class:`DeprecationWarning` when ``isaaclab_teleop`` is installed. 3.3.0 (2026-02-13) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Migrated all asset and sensor data properties from ``torch.Tensor`` to ``wp.array`` (NVIDIA Warp). All ``.data.*`` properties on :class:`~isaaclab.assets.Articulation`, :class:`~isaaclab.assets.RigidObject`, :class:`~isaaclab.assets.RigidObjectCollection`, and sensor data classes now return ``wp.array``. Use ``wp.to_torch()`` to convert back to ``torch.Tensor`` when needed. * Split all asset write methods into ``_index`` and ``_mask`` variants. The old ``env_ids`` parameter has been replaced by explicit ``_index`` methods (sparse indexed data) and ``_mask`` methods (full data with boolean mask). For example, ``write_root_link_pose_to_sim(data, env_ids)`` is now ``write_root_link_pose_to_sim_index(data, env_ids)`` or ``write_root_link_pose_to_sim_mask(data, env_mask)``. * Refactored :mod:`isaaclab.utils.wrench_composer` to use warp kernels internally. * Updated all MDP action, observation, reward, termination, command, and event functions to wrap ``wp.array`` data accesses with ``wp.to_torch()`` for torch compatibility. * Updated mock interfaces for all assets and sensors to produce ``wp.array``-backed data. Added ^^^^^ * Added :class:`~isaaclab.utils.buffers.TimestampedBufferWarp` for warp-native timestamped data buffers, replacing ``TimestampedBuffer`` in warp-backed asset and sensor classes. * Added shared warp math kernels in :mod:`isaaclab.utils.warp.kernels` for quaternion operations, coordinate transforms, and velocity computations. 3.2.0 (2026-02-06) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Refactored :class:`~isaaclab.sim.SimulationContext` to use :class:`~isaaclab.physics.PhysicsManager` abstraction layer for cleaner separation between simulation orchestration and physics backend. 3.1.0 (2026-02-05) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.test.benchmark.BaseIsaacLabBenchmark` class replacing dependency on ``isaacsim.benchmark.services`` for benchmarking workflows. This provides a standalone framework for measuring performance of Isaac Lab components. * Added measurement types in :mod:`isaaclab.test.benchmark.measurements`: * :class:`~isaaclab.test.benchmark.SingleMeasurement`: Single floating-point measurement with unit. * :class:`~isaaclab.test.benchmark.StatisticalMeasurement`: Mean, std, and sample count. * :class:`~isaaclab.test.benchmark.DictMeasurement`: Dictionary-valued measurement. * :class:`~isaaclab.test.benchmark.ListMeasurement`: List-valued measurement. * :class:`~isaaclab.test.benchmark.BooleanMeasurement`: Boolean measurement. * Added metadata types in :mod:`isaaclab.test.benchmark.measurements`: * :class:`~isaaclab.test.benchmark.StringMetadata`: String metadata. * :class:`~isaaclab.test.benchmark.IntMetadata`: Integer metadata. * :class:`~isaaclab.test.benchmark.FloatMetadata`: Float metadata. * :class:`~isaaclab.test.benchmark.DictMetadata`: Dictionary metadata. * Added :class:`~isaaclab.test.benchmark.TestPhase` for organizing measurements and metadata into logical phases within a benchmark. * Added :class:`~isaaclab.test.benchmark.BenchmarkMonitor` context manager for async system resource monitoring during blocking operations like RL training loops. * Added pluggable backend architecture in :mod:`isaaclab.test.benchmark.backends`: * ``json``: Full JSON output with all phases, measurements, and metadata. * ``osmo``: Osmo KPI format for CI/CD integration. * ``omniperf``: OmniPerf format for database upload. * ``summary``: Human-readable console summary plus JSON output. * Added system recorders in :mod:`isaaclab.test.benchmark.recorders`: * :class:`~isaaclab.test.benchmark.recorders.CPUInfoRecorder`: CPU information capture. * :class:`~isaaclab.test.benchmark.recorders.GPUInfoRecorder`: GPU information capture. * :class:`~isaaclab.test.benchmark.recorders.MemoryInfoRecorder`: Memory usage tracking. * :class:`~isaaclab.test.benchmark.recorders.VersionInfoRecorder`: Software version capture. * Added CLI arguments for benchmark scripts: ``--benchmark_backend``, ``--output_path``. * Added shell scripts for running benchmark suites: * ``scripts/benchmarks/run_non_rl_benchmarks.sh``: Non-RL environment stepping benchmarks. * ``scripts/benchmarks/run_physx_benchmarks.sh``: PhysX micro-benchmarks. * ``scripts/benchmarks/run_training_benchmarks.sh``: RL training benchmarks. * Added fallback in :mod:`isaaclab.test.benchmark.benchmark_core` for Isaac Sim packaging that bundles frametime recorders in a single module, so frametime collection works across variants. Changed ^^^^^^^ * Refactored benchmark scripts to use new :class:`~isaaclab.test.benchmark.BaseIsaacLabBenchmark` class instead of ``isaacsim.benchmark.services``. Fixed ^^^^^ * Fixed runtime stats in ``log_min_max_mean_stats`` (``scripts/benchmarks/utils.py``) so FPS metrics are labeled with unit ``FPS`` and time metrics with ``ms`` instead of all being ``ms``. Removed ^^^^^^^ * Removed hard dependency on ``isaacsim.benchmark.services`` extension for benchmarking. The extension is now optional and only used for frametime recorders when available. 3.0.3 (2026-02-05) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Modified all the base classes so that they implement the shorthands and the deprecation cycle to IsaacLab 4.0 3.0.2 (2026-02-04) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Removed exact version pinning for URDF asset importer extension that is incompatible with Isaac Sim 6.0. 3.0.1 (2026-02-04) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :file:`isaaclab.sh` to use libstdc++ CXXABI_1.3.15 from conda for systems that lack that version (e.g., Ubuntu 22.04). 3.0.0 (2026-02-02) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added albedo annotator for faster diffuse albedo rendering. This path will be the most performant when GUI is not required and only albedo and/or depth annotations are requested. Changed ^^^^^^^ * Updated Isaac Lab to be compatible with Isaac Sim 6.0.0. * Updated the required Python version to 3.12 for Isaac Lab installation. * Updated the required PyTorch version to 2.9.0+cu128 and torchvision to 0.24.0 for Isaac Lab installation. * Updated numpy to 2.3.1 following version in Kit 109.0. * Updated dex-retargeting to 0.5.0 with numpy 2.0+ dependency. * Removed explicit URDF importer extension version dependency in :class:`~isaaclab.sim.converters.urdf_converter.UrdfConverter` and related code. 2.1.2 (2026-01-30) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :mod:`isaaclab.test.benchmark` module providing a comprehensive benchmarking framework for measuring performance of Isaac Lab components. Includes: * :class:`BenchmarkConfig`: Configuration dataclass for benchmark execution parameters (iterations, warmup steps, instances, device). * :class:`BenchmarkResult`: Dataclass capturing timing statistics (mean, std in microseconds), skip status, and dependency information. * :class:`MethodBenchmark`: Definition class for methods to benchmark with multi-mode input generators. * Input generator helpers for creating standardized tensors and Warp masks: ``make_tensor_env_ids``, ``make_tensor_joint_ids``, ``make_tensor_body_ids``, ``make_warp_env_mask``, ``make_warp_joint_mask``, ``make_warp_body_mask``. * :func:`benchmark_method`: Core function for benchmarking with warmup phases, GPU synchronization, and graceful error handling. * I/O utilities: :func:`get_hardware_info`, :func:`get_git_info`, :func:`print_hardware_info`, :func:`print_results`, :func:`export_results_json`, :func:`export_results_csv`. 2.1.1 (2026-02-03) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :mod:`isaaclab.test.mock_interfaces` module providing mock implementations for unit testing without requiring Isaac Sim. Includes: * Mock assets: :class:`MockArticulation`, :class:`MockRigidObject`, :class:`MockRigidObjectCollection` with full state tracking and property management. * Mock sensors: :class:`MockContactSensor`, :class:`MockImu`, :class:`MockFrameTransformer` with configurable data outputs. * Utility classes: :class:`MockArticulationBuilder`, :class:`MockSensorBuilder`, :class:`MockWrenchComposer` for flexible mock construction. * Factory functions for common robot morphologies (quadruped, humanoid). * Patching utilities and decorators for easy test injection. 2.1.0 (2026-02-02) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.sensors.contact_sensor.BaseContactSensor` and :class:`~isaaclab.sensors.contact_sensor.BaseContactSensorData` abstract base classes that define the interface for contact sensors. These classes provide a backend-agnostic API for contact sensing. * Added :class:`~isaaclab.sensors.imu.BaseImu` and :class:`~isaaclab.sensors.imu.BaseImuData` abstract base classes that define the interface for IMU sensors. These classes provide a backend-agnostic API for inertial measurement. * Added :class:`~isaaclab.sensors.frame_transformer.BaseFrameTransformer` and :class:`~isaaclab.sensors.frame_transformer.BaseFrameTransformerData` abstract base classes that define the interface for frame transformer sensors. These classes provide a backend-agnostic API for coordinate frame transformations. Changed ^^^^^^^ * Refactored the sensor classes (:class:`~isaaclab.sensors.ContactSensor`, :class:`~isaaclab.sensors.Imu`, :class:`~isaaclab.sensors.FrameTransformer`) to follow the multi-backend architecture. The classes now act as factory wrappers that instantiate the appropriate backend-specific implementation (PhysX by default). * Refactored the sensor data classes (:class:`~isaaclab.sensors.ContactSensorData`, :class:`~isaaclab.sensors.ImuData`, :class:`~isaaclab.sensors.FrameTransformerData`) to use the factory pattern for backend-specific instantiation. * Moved PhysX-specific sensor tests to the ``isaaclab_physx`` package: * ``test_contact_sensor.py`` → ``isaaclab_physx/test/sensors/`` * ``test_imu.py`` → ``isaaclab_physx/test/sensors/`` * ``test_frame_transformer.py`` → ``isaaclab_physx/test/sensors/`` 2.0.0 (2026-01-30) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.assets.BaseArticulation` and :class:`~isaaclab.assets.BaseArticulationData` abstract base classes that define the interface for articulation assets. These classes provide a backend-agnostic API for articulation operations. * Added :class:`~isaaclab.assets.BaseRigidObject` and :class:`~isaaclab.assets.BaseRigidObjectData` abstract base classes that define the interface for rigid object assets. These classes provide a backend-agnostic API for rigid object operations. * Added :class:`~isaaclab.assets.BaseRigidObjectCollection` and :class:`~isaaclab.assets.BaseRigidObjectCollectionData` abstract base classes that define the interface for rigid object collection assets. These classes provide a backend-agnostic API for managing collections of rigid objects. * Added :mod:`~isaaclab.utils.backend_utils` module with utilities for managing simulation backends. Changed ^^^^^^^ * Refactored the asset classes to follow a multi-backend architecture. The core :mod:`isaaclab.assets` module now provides abstract base classes that define the interface, while backend-specific implementations are provided in separate packages (e.g., ``isaaclab_physx``). * The concrete :class:`~isaaclab.assets.Articulation`, :class:`~isaaclab.assets.RigidObject`, and :class:`~isaaclab.assets.RigidObjectCollection` classes in the ``isaaclab`` package now inherit from their respective base classes, and using the backend-specific implementations provided in the ``isaaclab_physx`` package, provide the default PhysX-based implementation. * Moved :class:`DeformableObject`, :class:`DeformableObjectCfg`, and :class:`DeformableObjectData` to the ``isaaclab_physx`` package since deformable bodies are specific to PhysX simulation. * Moved :class:`SurfaceGripper` and :class:`SurfaceGripperCfg` to the ``isaaclab_physx`` package since surface grippers rely on PhysX-specific contact APIs. Deprecated ^^^^^^^^^^ * Deprecated the ``root_physx_view`` property on :class:`~isaaclab.assets.Articulation`, :class:`~isaaclab.assets.RigidObject`, and :class:`~isaaclab.assets.RigidObjectCollection` in favor of the backend-agnostic ``root_view`` property. * Deprecated the ``object_*`` naming convention in :class:`~isaaclab.assets.RigidObjectCollection` and :class:`~isaaclab.assets.RigidObjectCollectionData` in favor of ``body_*``: **RigidObjectCollection methods:** * ``write_object_state_to_sim()`` → use ``write_body_state_to_sim()`` * ``write_object_link_state_to_sim()`` → use ``write_body_link_state_to_sim()`` * ``write_object_pose_to_sim()`` → use ``write_body_pose_to_sim()`` * ``write_object_link_pose_to_sim()`` → use ``write_body_link_pose_to_sim()`` * ``write_object_com_pose_to_sim()`` → use ``write_body_com_pose_to_sim()`` * ``write_object_velocity_to_sim()`` → use ``write_body_com_velocity_to_sim()`` * ``write_object_com_velocity_to_sim()`` → use ``write_body_com_velocity_to_sim()`` * ``write_object_link_velocity_to_sim()`` → use ``write_body_link_velocity_to_sim()`` * ``find_objects()`` → use ``find_bodies()`` **RigidObjectCollectionData properties:** * ``default_object_state`` → use ``default_body_state`` * ``object_names`` → use ``body_names`` * ``object_pose_w``, ``object_pos_w``, ``object_quat_w`` → use ``body_pose_w``, ``body_pos_w``, ``body_quat_w`` * ``object_vel_w``, ``object_lin_vel_w``, ``object_ang_vel_w`` → use ``body_vel_w``, ``body_lin_vel_w``, ``body_ang_vel_w`` * ``object_acc_w``, ``object_lin_acc_w``, ``object_ang_acc_w`` → use ``body_acc_w``, ``body_lin_acc_w``, ``body_ang_acc_w`` * And all other ``object_*`` properties (see :ref:`migrating-to-isaaclab-3-0` for complete list). Migration ^^^^^^^^^ * See :ref:`migrating-to-isaaclab-3-0` for detailed migration instructions. 1.0.0 (2026-01-30) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a tool to find hard-coded quaternions in the codebase and help user convert them to the new XYZW ordering. Changed ^^^^^^^ * Changed the quaternion ordering to match warp, PhysX, and Newton native XYZW quaternion ordering. 0.54.5 (2026-01-30) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :meth:`~isaaclab.utils.timer.Timer.get_timer_statistics` to get the statistics of the elapsed time of a timer. Changed ^^^^^^^ * Changed :class:`~isaaclab.utils.timer.Timer` class to use the online Welford's algorithm to compute the mean and standard deviation of the elapsed time. 0.54.4 (2026-02-04) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :class:`~isaaclab.envs.mdp.actions.JointPositionToLimitsAction` and :class:`~isaaclab.envs.mdp.actions.EMAJointPositionToLimitsAction` ignoring ``preserve_order=True`` when the number of specified joints matches the total number of joints in the asset. The optimization that replaced joint indices with ``slice(None)`` now correctly checks for the ``preserve_order`` flag. 0.54.3 (2026-01-28) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Moved :mod:`isaaclab.sensors.tacsl_sensor` to :mod:`isaaclab_contrib.sensors.tacsl_sensor` module, since it is not completely ready for release yet. 0.54.2 (2026-01-25) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added test suite for ray caster patterns with comprehensive parameterized tests. Fixed ^^^^^ * Fixed incorrect horizontal angle calculation in :func:`~isaaclab.sensors.ray_caster.patterns.patterns.lidar_pattern` that caused the actual angular resolution to differ from the requested resolution. 0.54.1 (2026-01-28) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Teleop: update carb settings to be compatible with Isaac Sim 6.0/Kit XR 110.0 0.54.0 (2026-01-13) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added Fabric backend support to :class:`~isaaclab.sim.views.XformPrimView` for GPU-accelerated batch transform operations on all Boundable prims using Warp kernels. * Added :mod:`~isaaclab.sim.utils.fabric_utils` module with Warp kernels for efficient Fabric matrix operations. Changed ^^^^^^^ * Changed :class:`~isaaclab.sensors.camera.Camera` to use Fabric backend for faster pose queries. 0.53.2 (2026-01-14) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.assets.utils.wrench_composer.WrenchComposer` to compose forces and torques at the body's center of mass frame. * Added :meth:`~isaaclab.assets.Articulation.instantaneous_wrench_composer` to add or set instantaneous external wrenches to the articulation. * Added :meth:`~isaaclab.assets.Articulation.permanent_wrench_composer` to add or set permanent external wrenches to the articulation. * Added :meth:`~isaaclab.assets.RigidObject.instantaneous_wrench_composer` to add or set instantaneous external wrenches to the rigid object. * Added :meth:`~isaaclab.assets.RigidObject.permanent_wrench_composer` to add or set permanent external wrenches to the rigid object. * Added :meth:`~isaaclab.assets.RigidObjectCollection.instantaneous_wrench_composer` to add or set instantaneous external wrenches to the rigid object collection. * Added :meth:`~isaaclab.assets.RigidObjectCollection.permanent_wrench_composer` to add or set permanent external wrenches to the rigid object collection. * Added unit tests for the wrench composer. * Added kernels for the wrench composer in the :mod:`isaaclab.utils.warp.kernels` module. Changed ^^^^^^^ * Deprecated :meth:`~isaaclab.assets.Articulation.set_external_force_and_torque` in favor of :meth:`~isaaclab.assets.Articulation.permanent_wrench_composer.set_forces_and_torques`. * Deprecated :meth:`~isaaclab.assets.RigidObject.set_external_force_and_torque` in favor of :meth:`~isaaclab.assets.RigidObject.permanent_wrench_composer.set_forces_and_torques`. * Deprecated :meth:`~isaaclab.assets.RigidObjectCollection.set_external_force_and_torque` in favor of :meth:`~isaaclab.assets.RigidObjectCollection.permanent_wrench_composer.set_forces_and_torques`. * Modified the tests of the articulation, rigid object, and rigid object collection to use the new permanent and instantaneous external wrench functions and test them. 0.53.1 (2026-01-08) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added function :func:`~isaaclab.sim.utils.prims.change_prim_property` to change attributes on a USD prim. This replaces the previously used USD command ``ChangeProperty`` that depends on Omniverse Kit API. Changed ^^^^^^^ * Replaced occurrences of ``ChangeProperty`` USD command to :func:`~isaaclab.sim.utils.prims.change_prim_property`. 0.53.0 (2026-01-07) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.sim.views.XformPrimView` class to provide a view of the USD Xform operations. Compared to Isaac Sim implementation, this class optimizes several operations using USD SDF API. Changed ^^^^^^^ * Switched the sensor classes to use the :class:`~isaaclab.sim.views.XformPrimView` class for the internal view wherever applicable. Removed ^^^^^^^ * Removed the usage of :class:`isaacsim.core.utils.prims.XformPrim` class from the sensor classes. 0.52.2 (2026-01-06) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Improved logic for the URDF importer extension version pinning: the older extension version is now pinned only on Isaac Sim 5.1 and later, while older Isaac Sim versions no longer attempt to pin to a version that does not exist. 0.52.1 (2026-01-02) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed FrameTransformer body name collision when tracking bodies with the same name but different hierarchical paths (e.g., Robot/left_hand vs Robot_1/left_hand). The sensor now uses the full prim path (with env_* patterns normalized) as the unique body identifier instead of just the leaf body name. This ensures bodies at different hierarchy levels are tracked separately. The change is backwards compatible: user-facing frame names still default to leaf names when not explicitly provided, while internal body tracking uses full paths to avoid collisions. Works for both environment-scoped paths (e.g., /World/envs/env_0/Robot) and non-environment paths (e.g., /World/Robot). 0.52.0 (2026-01-02) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :mod:`~isaaclab.sim.utils.transforms` module to handle USD Xform operations. * Added passing of ``stage`` to the :func:`~isaaclab.sim.utils.prims.create_prim` function inside spawning functions to allow for the creation of prims in a specific stage. Changed ^^^^^^^ * Changed :func:`~isaaclab.sim.utils.prims.create_prim` function to use the :mod:`~isaaclab.sim.utils.transforms` module for USD Xform operations. It removes the usage of Isaac Sim's XformPrim class. 0.51.2 (2025-12-30) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :attr:`~isaaclab.managers.ObservationManager.get_active_iterable_terms` to handle observation data when not concatenated along the last dimension. 0.51.1 (2025-12-29) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :func:`~isaaclab.utils.version.get_isaac_sim_version` to get the version of Isaac Sim. This function caches the version of Isaac Sim and returns it immediately if it has already been computed. This helps avoid parsing the VERSION file from disk multiple times. Changed ^^^^^^^ * Changed the function :meth:`~isaaclab.utils.version.compare_versions` to use :mod:`packaging.version.Version` module. * Changed occurrences of :func:`isaacsim.core.version.get_version` to :func:`~isaaclab.utils.version.get_isaac_sim_version`. Removed ^^^^^^^ * Removed storing of Isaac Sim version inside the environment base classes defined inside :mod:`isaaclab.envs` module. 0.51.0 (2025-12-29) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added tests for the :mod:`isaaclab.sim.utils.prims` module. * Added tests for the :mod:`isaaclab.sim.utils.stage` module. * Created :mod:`isaaclab.sim.utils.legacy` sub-module to keep deprecated functions. Removed ^^^^^^^ * Removed many unused USD prim and stage related operations from the :mod:`isaaclab.sim.utils` module. * Moved :mod:`isaaclab.sim.utils.nucleus` sub-module to the ``tests/deps/isaacsim`` directory as it is only being used for Isaac Sim check scripts. Changed ^^^^^^^ * Changed the organization of the :mod:`isaaclab.sim.utils` module to make it clearer which functions are related to the stage and which are related to the prims. * Modified imports of :mod:`~isaaclab.sim.utils.stage` and :mod:`~isaaclab.sim.utils.prims` modules to only use the :mod:`isaaclab.sim.utils` module. * Moved ``logger.py`` to the :mod:`isaaclab.utils` module. 0.50.7 (2025-12-29) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Moved ``pretrained_checkpoint.py`` to the :mod:`isaaclab_rl.utils` module. 0.50.6 (2025-12-18) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed issue where :meth:~isaaclab.envs.mdp.observations.body_pose_w` was modifying the original body pose data when using slice or int for body_ids in the observation config. A clone of the data is now created to avoid modifying the original data. 0.50.5 (2025-12-15) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.sensors.MultiMeshRayCaster` sensor to support tracking of dynamic meshes for ray-casting. We keep the previous implementation of :class:`~isaaclab.sensors.RayCaster` for backwards compatibility. * Added :mod:`isaaclab.utils.mesh` sub-module to perform various Trimesh and USD Mesh related operations. 0.50.4 (2025-12-15) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`~isaaclab.sim.PhysxCfg.enable_external_forces_every_iteration` to enable external forces every position iteration. This can help improve the accuracy of velocity updates. Consider enabling this flag if the velocities generated by the simulation are noisy. * Added warning when :attr:`~isaaclab.sim.PhysxCfg.enable_external_forces_every_iteration` is set to False and the solver type is TGS. 0.50.3 (2025-12-11) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed missing mesh collision approximation attribute when running :class:`~isaaclab.sim.converters.MeshConverter`. The collision approximation attribute is now properly set on the USD prim when converting meshes with mesh collision properties. 0.50.2 (2025-11-21) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Prevent randomizing mass to zero in :meth:`~isaaclab.envs.mdp.events.randomize_mass_by_scale` to avoid physics errors. 0.50.1 (2025-11-25) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed advanced indexing issue in resetting prev action in :class:`~isaaclab.envs.mdp.actions.JointPositionToLimitsAction` . 0.50.0 (2025-12-8) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Implemented ability to attach an imu sensor to xform primitives in a usd file. This PR is based on work by '@GiulioRomualdi' here: #3094 Addressing issue #3088. 0.49.3 (2025-12-03) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`G1TriHandUpperBodyMotionControllerGripperRetargeter` and :class:`G1TriHandUpperBodyMotionControllerGripperRetargeterCfg` for retargeting the gripper state from motion controllers. * Added unit tests for the retargeters. 0.49.2 (2025-11-17) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`~isaaclab.sensors.contact_sensor.ContactSensorCfg.track_friction_forces` to toggle tracking of friction forces between sensor bodies and filtered bodies. * Added :attr:`~isaaclab.sensors.contact_sensor.ContactSensorData.friction_forces_w` data field for tracking friction forces. 0.49.1 (2025-11-26) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed import from ``isaacsim.core.utils.prims`` to ``isaaclab.sim.utils.prims`` across repo to reduce IsaacLab dependencies. 0.49.0 (2025-11-10) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Updated the URDF Importer version to 2.4.31 to avoid issues with merging joints on the latest URDF importer in Isaac Sim 5.1 0.48.9 (2025-11-21) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Add navigation state API to IsaacLabManagerBasedRLMimicEnv * Add optional custom recorder config to MimicEnvCfg 0.48.8 (2025-10-15) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`preserve_order` flag to :class:`~isaaclab.envs.mdp.actions.actions_cfg.JointPositionToLimitsActionCfg` 0.48.7 (2025-11-25) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed import from ``isaaclab.sim.utils`` to ``isaaclab.sim.utils.stage`` in ``isaaclab.devices.openxr.xr_anchor_utils.py`` to properly propagate the Isaac Sim stage context. 0.48.6 (2025-11-18) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added OpenXR motion controller support for the G1 robot locomanipulation environment ``Isaac-PickPlace-Locomanipulation-G1-Abs-v0``. This enables teleoperation using XR motion controllers in addition to hand tracking. * Added :class:`OpenXRDeviceMotionController` for motion controller-based teleoperation with headset anchoring control. * Added motion controller-specific retargeters: * :class:`G1TriHandControllerUpperBodyRetargeterCfg` for upper body and hand control using motion controllers. * :class:`G1LowerBodyStandingControllerRetargeterCfg` for lower body control using motion controllers. 0.48.5 (2025-11-14) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed import from ``isaacsim.core.utils.stage`` to ``isaaclab.sim.utils.stage`` to reduce IsaacLab dependencies. 0.48.4 (2025-11-14) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Refactored modules related to the actuator configs in order to remediate a circular import necessary to support future actuator drive model improvements. 0.48.3 (2025-11-13) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Moved retargeter and device declaration out of factory and into the devices/retargeters themselves. 0.48.2 (2025-11-13) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed from using :meth:`isaacsim.core.utils.torch.set_seed` to :meth:`~isaaclab.utils.seed.configure_seed` 0.48.1 (2025-11-10) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.devices.haply.HaplyDevice` class for SE(3) teleoperation with dual Haply Inverse3 and Versegrip devices, supporting robot manipulation with haptic feedback. * Added demo script ``scripts/demos/haply_teleoperation.py`` and documentation guide in ``docs/source/how-to/haply_teleoperation.rst`` for Haply-based robot teleoperation. 0.48.0 (2025-11-03) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Detected contacts are reported with the threshold of 0.0 (instead of 1.0). This increases the sensitivity of contact detection. Fixed ^^^^^ * Removed passing the boolean flag to :meth:`isaaclab.sim.schemas.activate_contact_sensors` when activating contact sensors. This was incorrectly modifying the threshold attribute to 1.0 when contact sensors were activated. 0.47.11 (2025-11-03) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the bug where effort limits were being overridden in :class:`~isaaclab.actuators.ActuatorBase` when the ``effort_limit`` parameter is set to None. * Corrected the unit tests for three effort limit scenarios with proper assertions 0.47.10 (2025-11-06) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``num_rerenders_on_reset`` parameter to ManagerBasedEnvCfg and DirectRLEnvCfg to configure the number of render steps to perform after reset. This enables more control over DLSS rendering behavior after reset. Changed ^^^^^^^ * Added deprecation warning for ``rerender_on_reset`` parameter in ManagerBasedEnv and DirectRLEnv. 0.47.9 (2025-11-05) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Fixed termination term bookkeeping in :class:`~isaaclab.managers.TerminationManager`: per-step termination and last-episode termination bookkeeping are now separated. last-episode dones are now updated once per step from all term outputs, avoiding per-term overwrites and ensuring Episode_Termination metrics reflect the actual triggering terms. 0.47.8 (2025-11-06) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added parameter :attr:`~isaaclab.terrains.TerrainImporterCfg.use_terrain_origins` to allow generated sub terrains with grid origins. 0.47.7 (2025-10-31) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed Pink IK controller qpsolver from osqp to daqp. * Changed Null Space matrix computation in Pink IK's Null Space Posture Task to a faster matrix pseudo inverse computation. 0.47.6 (2025-11-01) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed an issue in recurrent policy evaluation in RSL-RL framework where the recurrent state was not reset after an episode termination. 0.47.5 (2025-10-30) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added docstrings notes to clarify the friction coefficient modeling in Isaac Sim 4.5 and 5.0. 0.47.4 (2025-10-30) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Enhanced :meth:`~isaaclab.managers.RecorderManager.export_episodes` method to support customizable sequence of demo IDs: - Added argument ``demo_ids`` to :meth:`~isaaclab.managers.RecorderManager.export_episodes` to accept a sequence of integers for custom episode identifiers. * Enhanced :meth:`~isaaclab.utils.datasets.HDF5DatasetFileHandler.write_episode` method to support customizable episode identifiers: - Added argument ``demo_id`` to :meth:`~isaaclab.utils.datasets.HDF5DatasetFileHandler.write_episode` to accept a custom integer for episode identifier. 0.47.3 (2025-10-22) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the data type conversion in :class:`~isaaclab.sensors.tiled_camera.TiledCamera` to support the correct data type when converting from numpy arrays to warp arrays on the CPU. 0.47.2 (2025-10-17) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :meth:`~isaaclab.sim.utils.resolve_prim_pose` to resolve the pose of a prim with respect to another prim. * Added :meth:`~isaaclab.sim.utils.resolve_prim_scale` to resolve the scale of a prim in the world frame. 0.47.1 (2025-10-17) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Suppressed yourdfpy warnings when trying to load meshes from hand urdfs in dex_retargeting. These mesh files are not used by dex_retargeting, but the parser is incorrectly configured by dex_retargeting to load them anyway which results in warning spam. 0.47.0 (2025-10-14) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Removed pickle utilities for saving and loading configurations as pickle contains security vulnerabilities in its APIs. Configurations can continue to be saved and loaded through yaml. 0.46.11 (2025-10-15) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for modifying the :attr:`/rtx/domeLight/upperLowerStrategy` Sim rendering setting. 0.46.10 (2025-10-13) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ARM64 architecture for pink ik and dex-retargetting setup installations. 0.46.9 (2025-10-09) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :meth:`~isaaclab.devices.keyboard.se3_keyboard.Se3Keyboard.__del__` to use the correct method name for unsubscribing from keyboard events "unsubscribe_to_keyboard_events" instead of "unsubscribe_from_keyboard_events". 0.46.8 (2025-10-02) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed scaling factor for retargeting of GR1T2 hand. 0.46.7 (2025-09-30) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed finger joint indices with manus extension. 0.46.6 (2025-09-30) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added argument :attr:`traverse_instance_prims` to :meth:`~isaaclab.sim.utils.get_all_matching_child_prims` and :meth:`~isaaclab.sim.utils.get_first_matching_child_prim` to control whether to traverse instance prims during the traversal. Earlier, instanced prims were skipped since :meth:`Usd.Prim.GetChildren` did not return instanced prims, which is now fixed. Changed ^^^^^^^ * Made parsing of instanced prims in :meth:`~isaaclab.sim.utils.get_all_matching_child_prims` and :meth:`~isaaclab.sim.utils.get_first_matching_child_prim` as the default behavior. * Added parsing of instanced prims in :meth:`~isaaclab.sim.utils.make_uninstanceable` to make all prims uninstanceable. 0.46.5 (2025-10-14) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Exposed parameter :attr:`~isaaclab.sim.spawners.PhysxCfg.solve_articulation_contact_last` to configure USD attribute ``physxscene:solveArticulationContactLast``. This parameter may help improve solver stability with grippers, which previously required reducing simulation time-steps. :class:`~isaaclab.sim.spawners.PhysxCfg` 0.46.4 (2025-10-06) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Fixed :attr:`~isaaclab.sim.simulation_context.SimulationContext.device` to return the device from the configuration. Previously, it was returning the device from the simulation manager, which was causing a performance overhead. 0.46.3 (2025-09-17) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Modified setter to support for viscous and dynamic joint friction coefficients in articulation based on IsaacSim 5.0. * Added randomization of viscous and dynamic joint friction coefficients in event term. 0.46.2 (2025-09-13) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Fixed missing actuator indices in :meth:`~isaaclab.envs.mdp.events.randomize_actuator_gains` 0.46.1 (2025-09-10) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Moved IO descriptors output directory to a subfolder under the task log directory. 0.46.0 (2025-09-06) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added argument :attr:`traverse_instance_prims` to :meth:`~isaaclab.sim.utils.get_all_matching_child_prims` and :meth:`~isaaclab.sim.utils.get_first_matching_child_prim` to control whether to traverse instance prims during the traversal. Earlier, instanced prims were skipped since :meth:`Usd.Prim.GetChildren` did not return instanced prims, which is now fixed. Changed ^^^^^^^ * Made parsing of instanced prims in :meth:`~isaaclab.sim.utils.get_all_matching_child_prims` and :meth:`~isaaclab.sim.utils.get_first_matching_child_prim` as the default behavior. * Added parsing of instanced prims in :meth:`~isaaclab.sim.utils.make_uninstanceable` to make all prims uninstanceable. 0.45.16 (2025-09-06) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added teleoperation environments for Unitree G1. This includes an environment with lower body fixed and upper body controlled by IK, and an environment with the lower body controlled by a policy and the upper body controlled by IK. 0.45.15 (2025-09-05) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added action terms for using RMPFlow in Manager-Based environments. 0.45.14 (2025-09-08) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.ui.xr_widgets.TeleopVisualizationManager` and :class:`~isaaclab.ui.xr_widgets.XRVisualization` classes to provide real-time visualization of teleoperation and inverse kinematics status in XR environments. 0.45.13 (2025-09-08) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.devices.openxr.manus_vive.ManusVive` to support teleoperation with Manus gloves and Vive trackers. 0.45.12 (2025-09-05) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.envs.mdp.actions.SurfaceGripperBinaryAction` for supporting surface grippers in Manager-Based workflows. Changed ^^^^^^^ * Added AssetBase inheritance for :class:`~isaaclab.assets.surface_gripper.SurfaceGripper`. 0.45.11 (2025-09-04) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixes a high memory usage and perf slowdown issue in episode data by removing the use of torch.cat when appending to the episode data at each timestep. The use of torch.cat was causing the episode data to be copied at each timestep, which causes high memory usage and significant performance slowdown when recording longer episode data. * Patches the configclass to allow validate dict with key is not a string. Added ^^^^^ * Added optional episode metadata (ep_meta) to be stored in the HDF5 data attributes. * Added option to record data pre-physics step. * Added joint_target data to episode data. Joint target data can be optionally recorded by the user and replayed to improve determinism of replay. 0.45.10 (2025-09-02) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed regression in reach task configuration where the gripper command was being returned. * Added :attr:`~isaaclab.devices.Se3GamepadCfg.gripper_term` to :class:`~isaaclab.devices.Se3GamepadCfg` to control whether the gamepad device should return a gripper command. * Added :attr:`~isaaclab.devices.Se3SpaceMouseCfg.gripper_term` to :class:`~isaaclab.devices.Se3SpaceMouseCfg` to control whether the spacemouse device should return a gripper command. * Added :attr:`~isaaclab.devices.Se3KeyboardCfg.gripper_term` to :class:`~isaaclab.devices.Se3KeyboardCfg` to control whether the keyboard device should return a gripper command. 0.45.9 (2025-08-27) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed removing import of pink_ik controller from isaaclab.controllers which is causing pinocchio import error. 0.45.8 (2025-07-25) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Created :attr:`~isaaclab.controllers.pink_ik.PinkIKControllerCfg.target_eef_link_names` to :class:`~isaaclab.controllers.pink_ik.PinkIKControllerCfg` to specify the target end-effector link names for the pink inverse kinematics controller. Changed ^^^^^^^ * Updated pink inverse kinematics controller configuration for the following tasks (Isaac-PickPlace-GR1T2, Isaac-NutPour-GR1T2, Isaac-ExhaustPipe-GR1T2) to increase end-effector tracking accuracy and speed. Also added a null-space regularizer that enables turning on of waist degrees-of-freedom. * Improved the test_pink_ik script to more comprehensive test on controller accuracy. Also, migrated to use pytest. With the current IK controller improvements, our unit tests pass position and orientation accuracy test within **(1 mm, 1 degree)**. Previously, the position accuracy tolerances were set to **(30 mm, 10 degrees)**. * Included a new config parameter :attr:`fail_on_ik_error` to :class:`~isaaclab.controllers.pink_ik.PinkIKControllerCfg` to control whether the IK controller raise an exception if robot joint limits are exceeded. In the case of an exception, the controller will hold the last joint position. This adds to stability of the controller and avoids operator experiencing what is perceived as sudden large delays in robot control. 0.45.7 (2025-08-21) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added periodic logging when checking if a USD path exists on a Nucleus server to improve user experience when the checks takes a while. 0.45.6 (2025-08-22) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :meth:`~isaaclab.envs.mdp.events.randomize_rigid_body_com` to broadcasts the environment ids. 0.45.5 (2025-08-21) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :meth:`~isaaclab.assets.Articulation.write_joint_friction_coefficient_to_sim` to set the friction coefficients in the simulation. * Fixed :meth:`~isaaclab.assets.Articulation.write_joint_dynamic_friction_coefficient_to_sim` to set the friction coefficients in the simulation.* Added :meth:`~isaaclab.envs.ManagerBasedEnvCfg.export_io_descriptors` to toggle the export of the IO descriptors. * Fixed :meth:`~isaaclab.assets.Articulation.write_joint_viscous_friction_coefficient_to_sim` to set the friction coefficients in the simulation. 0.45.4 (2025-08-21) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added unit tests for :class:`~isaaclab.sensor.sensor_base` 0.45.3 (2025-08-20) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :meth:`isaaclab.envs.mdp.terminations.joint_effort_out_of_limit` so that it correctly reports whether a joint effort limit has been violated. Previously, the implementation marked a violation when the applied and computed torques were equal; in fact, equality should indicate no violation, and vice versa. 0.45.2 (2025-08-18) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :meth:`~isaaclab.managers.ObservationManager.get_IO_descriptors` to export the IO descriptors for the observation manager. * Added :meth:`~isaaclab.envs.ManagerBasedEnvCfg.io_descriptors_output_dir` to configure the directory to export the IO descriptors to. * Added :meth:`~isaaclab.envs.ManagerBasedEnvCfg.export_io_descriptors` to toggle the export of the IO descriptors. * Added the option to export the Observation and Action of the managed environments into a YAML file. This can be used to more easily deploy policies trained in Isaac Lab. 0.45.1 (2025-08-16) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added validations for scale-based randomization ranges across mass, actuator, joint, and tendon parameters. Changed ^^^^^^^ * Refactored randomization functions into classes with initialization-time checks to avoid runtime overhead. 0.45.0 (2025-08-07) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`~isaaclab.sensors.contact_sensor.ContactSensorCfg.track_contact_points` to toggle tracking of contact point locations between sensor bodies and filtered bodies. * Added :attr:`~isaaclab.sensors.contact_sensor.ContactSensorCfg.max_contact_data_per_prim` to configure the maximum amount of contacts per sensor body. * Added :attr:`~isaaclab.sensors.contact_sensor.ContactSensorData.contact_pos_w` data field for tracking contact point locations. 0.44.12 (2025-08-12) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed IndexError in :meth:`isaaclab.envs.mdp.events.reset_joints_by_scale`, :meth:`isaaclab.envs.mdp.events.reset_joints_by_offsets` by adding dimension to env_ids when indexing. 0.44.11 (2025-08-11) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed rendering preset mode when an experience CLI arg is provided. 0.44.10 (2025-08-06) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the old termination manager in :class:`~isaaclab.managers.TerminationManager` term_done logging that logs the instantaneous term done count at reset. This let to inaccurate aggregation of termination count, obscuring the what really happening during the training. Instead we log the episodic term done. 0.44.9 (2025-07-30) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``from __future__ import annotations`` to manager_based_rl_mimic_env.py to fix Sphinx doc warnings for IsaacLab Mimic docs. 0.44.8 (2025-07-30) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Improved handling of deprecated flag :attr:`~isaaclab.sensors.RayCasterCfg.attach_yaw_only`. Previously, the flag was only handled if it was set to True. This led to a bug where the yaw was not accounted for when the flag was set to False. * Fixed the handling of interval-based events inside :class:`~isaaclab.managers.EventManager` to properly handle their resets. Previously, only class-based events were properly handled. 0.44.7 (2025-07-30) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a new argument ``is_global`` to :meth:`~isaaclab.assets.Articulation.set_external_force_and_torque`, :meth:`~isaaclab.assets.RigidObject.set_external_force_and_torque`, and :meth:`~isaaclab.assets.RigidObjectCollection.set_external_force_and_torque` allowing to set external wrenches in the global frame directly from the method call rather than having to set the frame in the configuration. Removed ^^^^^^^^ * Removed :attr:`xxx_external_wrench_frame` flag from asset configuration classes in favor of direct argument passed to the :meth:`set_external_force_and_torque` function. 0.44.6 (2025-07-28) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Tweak default behavior for rendering preset modes. 0.44.5 (2025-07-28) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :meth:`isaaclab.scene.reset_to` to properly accept None as valid argument. * Added tests to verify that argument types. 0.44.4 (2025-07-22) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added safe callbacks for stage in memory attaching. * Remove on prim deletion callback workaround 0.44.3 (2025-07-21) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed rendering preset mode regression. 0.44.2 (2025-07-22) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updated teleop scripts to print to console vs omni log. 0.44.1 (2025-07-17) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updated test_pink_ik.py test case to pytest format. 0.44.0 (2025-07-21) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed the way clipping is handled for :class:`~isaaclab.actuator.DCMotor` for torque-speed points in when in negative power regions. Added ^^^^^ * Added unit tests for :class:`~isaaclab.actuator.ImplicitActuator`, :class:`~isaaclab.actuator.IdealPDActuator`, and :class:`~isaaclab.actuator.DCMotor` independent of :class:`~isaaclab.assets.Articulation` 0.43.0 (2025-07-21) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updates torch version to 2.7.0 and torchvision to 0.22.0. Some dependencies now require torch>=2.6, and given the vulnerabilities in Torch 2.5.1, we are updating the torch version to 2.7.0 to also include Blackwell support. Since Isaac Sim 4.5 has not updated the torch version, we are now overwriting the torch installation step in isaaclab.sh when running ``./isaaclab.sh -i``. 0.42.26 (2025-06-29) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added MangerBasedRLEnv support for composite gym observation spaces. * A test for the composite gym observation spaces in ManagerBasedRLEnv is added to ensure that the observation spaces are correctly configured base on the clip. 0.42.25 (2025-07-11) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`~isaaclab.sensors.ContactSensorData.force_matrix_w_history` that tracks the history of the filtered contact forces in the world frame. 0.42.24 (2025-06-25) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added new curriculum mdp :func:`~isaaclab.envs.mdp.curriculums.modify_env_param` and :func:`~isaaclab.envs.mdp.curriculums.modify_env_param` that enables flexible changes to any configurations in the env instance 0.42.23 (2025-07-11) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :meth:`isaaclab.envs.mdp.events.reset_joints_by_scale`, :meth:`isaaclab.envs.mdp.events.reset_joints_by_offsets` restricting the resetting joint indices be that user defined joint indices. 0.42.22 (2025-07-11) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed missing attribute in :class:`~isaaclab.sensors.ray_caster.RayCasterCamera` class and its reset method when no env_ids are passed. 0.42.21 (2025-07-09) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added input param ``update_history`` to :meth:`~isaaclab.managers.ObservationManager.compute` to control whether the history buffer should be updated. * Added unit test for :class:`~isaaclab.envs.ManagerBasedEnv`. Fixed ^^^^^ * Fixed :class:`~isaaclab.envs.ManagerBasedEnv` and :class:`~isaaclab.envs.ManagerBasedRLEnv` to not update the history buffer on recording. 0.42.20 (2025-07-10) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added unit tests for multiple math functions: :func:`~isaaclab.utils.math.scale_transform`. :func:`~isaaclab.utils.math.unscale_transform`. :func:`~isaaclab.utils.math.saturate`. :func:`~isaaclab.utils.math.normalize`. :func:`~isaaclab.utils.math.copysign`. :func:`~isaaclab.utils.math.convert_quat`. :func:`~isaaclab.utils.math.quat_conjugate`. :func:`~isaaclab.utils.math.quat_from_euler_xyz`. :func:`~isaaclab.utils.math.quat_from_matrix`. :func:`~isaaclab.utils.math.euler_xyz_from_quat`. :func:`~isaaclab.utils.math.matrix_from_euler`. :func:`~isaaclab.utils.math.quat_from_angle_axis`. :func:`~isaaclab.utils.math.axis_angle_from_quat`. :func:`~isaaclab.utils.math.skew_symmetric_matrix`. :func:`~isaaclab.utils.math.combine_transform`. :func:`~isaaclab.utils.math.subtract_transform`. :func:`~isaaclab.utils.math.compute_pose_error`. Changed ^^^^^^^ * Changed the implementation of :func:`~isaaclab.utils.math.copysign` to better reflect the documented functionality. 0.42.19 (2025-07-09) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added clone_in_fabric config flag to :class:`~isaaclab.scene.interactive_scene_cfg.InteractiveSceneCfg` * Enable clone_in_fabric for envs which work with limited benchmark_non_rl.py script 0.42.18 (2025-07-07) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed texture and color randomization to use new replicator functional APIs. 0.42.17 (2025-07-08) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed hanging quat_rotate calls to point to quat_apply in :class:`~isaaclab.assets.articulation.ArticulationData` and :class:`~isaaclab.assets.articulation.RigidObjectCollectionData` 0.42.16 (2025-07-08) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ability to set platform height independent of object height for trimesh terrains. 0.42.15 (2025-07-01) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`abs_height_noise` and :attr:`rel_height_noise` to give minimum and maximum absolute and relative noise to :class:`isaaclab.terrrains.trimesh.MeshRepeatedObjectsTerrainCfg` * Added deprecation warnings to the existing :attr:`max_height_noise` but still functions. 0.42.14 (2025-07-03) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed unittest tests that are floating inside pytests for articulation and rendering 0.42.13 (2025-07-07) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updated gymnasium to v1.2.0. This update includes fixes for a memory leak that appears when recording videos with the ``--video`` flag. 0.42.12 (2025-06-27) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added unit test for :func:`~isaaclab.utils.math.quat_inv`. Fixed ^^^^^ * Fixed the implementation mistake in :func:`~isaaclab.utils.math.quat_inv`. 0.42.11 (2025-06-25) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :func:`~isaaclab.utils.dict.update_class_from_dict` preventing setting flat Iterables with different lengths. 0.42.10 (2025-06-25) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``sample_bias_per_component`` flag to :class:`~isaaclab.utils.noise.noise_model.NoiseModelWithAdditiveBias` to enable independent per-component bias sampling, which is now the default behavior. If set to False, the previous behavior of sharing the same bias value across all components is retained. 0.42.9 (2025-06-18) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed data inconsistency between read_body, read_link, read_com when write_body, write_com, write_joint performed, in :class:`~isaaclab.assets.Articulation`, :class:`~isaaclab.assets.RigidObject`, and :class:`~isaaclab.assets.RigidObjectCollection` * added pytest that check against these data consistencies 0.42.8 (2025-06-24) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * :class:`~isaaclab.utils.noise.NoiseModel` support for manager-based workflows. Changed ^^^^^^^ * Renamed :func:`~isaaclab.utils.noise.NoiseModel.apply` method to :func:`~isaaclab.utils.noise.NoiseModel.__call__`. 0.42.7 (2025-06-12) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed potential issues in :func:`~isaaclab.envs.mdp.events.randomize_visual_texture_material` related to handling visual prims during texture randomization. 0.42.6 (2025-06-11) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Remove deprecated usage of quat_rotate from articulation data class and replace with quat_apply. 0.42.5 (2025-05-22) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed collision filtering logic for CPU simulation. The automatic collision filtering feature currently has limitations for CPU simulation. Collision filtering needs to be manually enabled when using CPU simulation. 0.42.4 (2025-06-03) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Removes the hardcoding to :class:`~isaaclab.terrains.terrain_generator.TerrainGenerator` in :class:`~isaaclab.terrains.terrain_generator.TerrainImporter` and instead the ``class_type`` is used which is passed in the ``TerrainGeneratorCfg``. 0.42.3 (2025-03-20) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Made separate data buffers for poses and velocities for the :class:`~isaaclab.assets.Articulation`, :class:`~isaaclab.assets.RigidObject`, and :class:`~isaaclab.assets.RigidObjectCollection` classes. Previously, the two data buffers were stored together in a single buffer requiring an additional concatenation operation when accessing the data. * Cleaned up ordering of members inside the data classes for the assets to make them easier to comprehend. This reduced the code duplication within the class and made the class more readable. 0.42.2 (2025-05-31) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Updated gymnasium to >= 1.0 * Added support for specifying module:task_name as task name to avoid module import for ``gym.make`` 0.42.1 (2025-06-02) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added time observation functions to ~isaaclab.envs.mdp.observations module, :func:`~isaaclab.envs.mdp.observations.current_time_s` and :func:`~isaaclab.envs.mdp.observations.remaining_time_s`. Changed ^^^^^^^ * Moved initialization of ``episode_length_buf`` outside of :meth:`load_managers()` of :class:`~isaaclab.envs.ManagerBasedRLEnv` to make it available for mdp functions. 0.42.0 (2025-06-02) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for stage in memory and cloning in fabric. This will help improve performance for scene setup and lower overall startup time. 0.41.0 (2025-05-19) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added simulation schemas for spatial tendons. These can be configured for assets imported from file formats. * Added support for spatial tendons. 0.40.14 (2025-05-29) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added deprecation warning for :meth:`~isaaclab.utils.math.quat_rotate` and :meth:`~isaaclab.utils.math.quat_rotate_inverse` Changed ^^^^^^^ * Changed all calls to :meth:`~isaaclab.utils.math.quat_rotate` and :meth:`~isaaclab.utils.math.quat_rotate_inverse` to :meth:`~isaaclab.utils.math.quat_apply` and :meth:`~isaaclab.utils.math.quat_apply_inverse` for speed. 0.40.13 (2025-05-19) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Raising exceptions in step, render and reset if they occurred inside the initialization callbacks of assets and sensors.used from the experience files and the double definition is removed. 0.40.12 (2025-01-30) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added method :meth:`omni.isaac.lab.assets.AssetBase.set_visibility` to set the visibility of the asset in the simulation. 0.40.11 (2025-05-16) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for concatenation of observations along different dimensions in :class:`~isaaclab.managers.observation_manager.ObservationManager`. Changed ^^^^^^^ * Updated the :class:`~isaaclab.managers.command_manager.CommandManager` to update the command counter after the resampling call. 0.40.10 (2025-05-16) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed penetration issue for negative border height in :class:`~isaaclab.terrains.terrain_generator.TerrainGeneratorCfg`. 0.40.9 (2025-05-20) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed the implementation of :meth:`~isaaclab.utils.math.quat_box_minus` Added ^^^^^ * Added :meth:`~isaaclab.utils.math.quat_box_plus` * Added :meth:`~isaaclab.utils.math.rigid_body_twist_transform` 0.40.8 (2025-05-15) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :meth:`omni.isaac.lab.sensors.camera.camera.Camera.set_intrinsic_matrices` preventing setting of unused USD camera parameters. * Fixed :meth:`omni.isaac.lab.sensors.camera.camera.Camera._update_intrinsic_matrices` preventing unused USD camera parameters from being used to calculate :attr:`omni.isaac.lab.sensors.camera.CameraData.intrinsic_matrices` * Fixed :meth:`omni.isaac.lab.spawners.sensors.sensors_cfg.PinholeCameraCfg.from_intrinsic_matrix` preventing setting of unused USD camera parameters. 0.40.7 (2025-05-14) ~~~~~~~~~~~~~~~~~~~ * Added a new attribute :attr:`articulation_root_prim_path` to the :class:`~isaaclab.assets.ArticulationCfg` class to allow explicitly specifying the prim path of the articulation root. 0.40.6 (2025-05-14) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Enabled external cameras in XR. 0.40.5 (2025-05-23) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added feature for animation recording through baking physics operations into OVD files. 0.40.4 (2025-05-17) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed livestreaming options to use ``LIVESTREAM=1`` for WebRTC over public networks and ``LIVESTREAM=2`` for WebRTC over private networks. 0.40.3 (2025-05-20) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Made modifications to :func:`isaaclab.envs.mdp.image` to handle image normalization for normal maps. 0.40.2 (2025-05-14) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Refactored remove_camera_configs to be a function that can be used in the record_demos and teleop scripts. 0.40.1 (2025-05-14) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed spacemouse device add callback function to work with record_demos/teleop_se3_agent scripts. 0.40.0 (2025-05-03) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added check in RecorderManager to ensure that the success indicator is only set if the termination manager is present. * Added semantic tags in :func:`isaaclab.sim.spawners.from_files.spawn_ground_plane`. This allows for :attr:`semantic_segmentation_mapping` to be used when using the ground plane spawner. 0.39.0 (2025-04-01) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the :meth:`~isaaclab.env.mdp.observations.joint_effort` 0.38.0 (2025-04-01) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :meth:`~isaaclab.envs.mdp.observations.body_pose_w` * Added :meth:`~isaaclab.envs.mdp.observations.body_projected_gravity_b` 0.37.5 (2025-05-12) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a new teleop configuration class :class:`~isaaclab.devices.DevicesCfg` to support multiple teleoperation devices declared in the environment configuration file. * Implemented a factory function to create teleoperation devices based on the device configuration. 0.37.4 (2025-05-12) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Remove isaacsim.xr.openxr from openxr experience file. * Use Performance AR profile for XR rendering. 0.37.3 (2025-05-08) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Updated PINK task space action to record processed actions. * Added new recorder term for recording post step processed actions. 0.37.2 (2025-05-06) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Migrated OpenXR device to use the new OpenXR handtracking API from omni.kit.xr.core. 0.37.1 (2025-05-05) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Removed xr rendering mode. 0.37.0 (2025-04-24) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updated pytorch to latest 2.7.0 with cuda 12.8 for Blackwell support. Torch is now installed as part of the isaaclab.sh/bat scripts to ensure the correct version is installed. * Removed :attr:`~isaaclab.sim.spawners.PhysicsMaterialCfg.improve_patch_friction` as it has been deprecated and removed from the simulation. The simulation will always behave as if this attribute is set to true. 0.36.23 (2025-04-24) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed ``return_latest_camera_pose`` option in :class:`~isaaclab.sensors.TiledCameraCfg` from not being used to the argument ``update_latest_camera_pose`` in :class:`~isaaclab.sensors.CameraCfg` with application in both :class:`~isaaclab.sensors.Camera` and :class:`~isaaclab.sensors.TiledCamera`. 0.36.22 (2025-04-23) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^^^ * Adds correct type check for ManagerTermBase class in event_manager.py. 0.36.21 (2025-04-15) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Removed direct call of qpsovlers library from pink_ik controller and changed solver from quadprog to osqp. 0.36.20 (2025-04-09) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added call to set cuda device after each ``app.update()`` call in :class:`~isaaclab.sim.SimulationContext`. This is now required for multi-GPU workflows because some underlying logic in ``app.update()`` is modifying the cuda device, which results in NCCL errors on distributed setups. 0.36.19 (2025-04-01) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added check in RecorderManager to ensure that the success indicator is only set if the termination manager is present. 0.36.18 (2025-03-26) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a dynamic text instruction widget that provides real-time feedback on the number of successful recordings during demonstration sessions. 0.36.17 (2025-03-26) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added override in AppLauncher to apply patch for ``pxr.Gf.Matrix4d`` to work with Pinocchio 2.7.0. 0.36.16 (2025-03-25) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Modified rendering mode default behavior when the launcher arg :attr:`enable_cameras` is not set. 0.36.15 (2025-03-25) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added near plane distance configuration for XR device. 0.36.14 (2025-03-24) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed default render settings in :class:`~isaaclab.sim.SimulationCfg` to None, which means that the default settings will be used from the experience files and the double definition is removed. 0.36.13 (2025-03-24) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added headpose support to OpenXRDevice. 0.36.12 (2025-03-19) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added parameter to show warning if Pink IK solver fails to find a solution. 0.36.11 (2025-03-19) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed default behavior of :class:`~isaaclab.actuators.ImplicitActuator` if no :attr:`effort_limits_sim` or :attr:`effort_limit` is set. 0.36.10 (2025-03-17) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * App launcher to update the cli arguments if conditional defaults are used. 0.36.9 (2025-03-18) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^^^ * Xr rendering mode, which is default when xr is used. 0.36.8 (2025-03-17) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Removed ``scalar_first`` from scipy function usage to support older versions of scipy. 0.36.7 (2025-03-14) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Changed the import structure to only import ``pinocchio`` when ``pink-ik`` or ``dex-retargeting`` is being used. This also solves for the problem that ``pink-ik`` and ``dex-retargeting`` are not supported in windows. * Removed ``isaacsim.robot_motion.lula`` and ``isaacsim.robot_motion.motion_generation`` from the default loaded Isaac Sim extensions. * Moved pink ik action config to a separate file. 0.36.6 (2025-03-13) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Worked around an issue where the render mode is set to ``"RayTracedLighting"`` instead of ``"RaytracedLighting"`` by some dependencies. 0.36.5 (2025-03-11) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^^^ * Added 3 rendering mode presets: performance, balanced, and quality. * Preset settings are stored in ``apps/rendering_modes``. * Presets can be set with cli arg ``--rendering_mode`` or with :class:`RenderCfg`. * Preset rendering settings can be overwritten with :class:`RenderCfg`. * :class:`RenderCfg` supports all native RTX carb settings. Changed ^^^^^^^ * :class:`RenderCfg` default settings are unset. 0.36.4 (2025-03-11) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updated the OpenXR kit file ``isaaclab.python.xr.openxr.kit`` to inherit from ``isaaclab.python.kit`` instead of ``isaaclab.python.rendering.kit`` which is not appropriate. 0.36.3 (2025-03-10) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added the PinkIKController controller class that interfaces Isaac Lab with the Pink differential inverse kinematics solver to allow control of multiple links in a robot using a single solver. 0.36.2 (2025-03-07) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Allowed users to exit on 1 Ctrl+C instead of consecutive 2 key strokes. * Allowed physics reset during simulation through :meth:`reset` in :class:`~isaaclab.sim.SimulationContext`. 0.36.1 (2025-03-10) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`semantic_segmentation_mapping` for camera configs to allow specifying colors for semantics. 0.36.0 (2025-03-07) ~~~~~~~~~~~~~~~~~~~ Removed ^^^^^^^ * Removed the storage of tri-meshes and warp meshes inside the :class:`~isaaclab.terrains.TerrainImporter` class. Initially these meshes were added for ray-casting purposes. However, since the ray-caster reads the terrains directly from the USD files, these meshes are no longer needed. * Deprecated the :attr:`warp_meshes` and :attr:`meshes` attributes from the :class:`~isaaclab.terrains.TerrainImporter` class. These attributes now return an empty dictionary with a deprecation warning. Changed ^^^^^^^ * Changed the prim path of the "plane" terrain inside the :class:`~isaaclab.terrains.TerrainImporter` class. Earlier, the terrain was imported directly as the importer's prim path. Now, the terrain is imported as ``{importer_prim_path}/{name}``, where ``name`` is the name of the terrain. 0.35.0 (2025-03-07) ~~~~~~~~~~~~~~~~~~~ * Improved documentation of various attributes in the :class:`~isaaclab.assets.ArticulationData` class to make it clearer which values represent the simulation and internal class values. In the new convention, the ``default_xxx`` attributes are whatever the user configured from their configuration of the articulation class, while the ``xxx`` attributes are the values from the simulation. * Updated the soft joint position limits inside the :meth:`~isaaclab.assets.Articulation.write_joint_pos_limits_to_sim` method to use the new limits passed to the function. * Added setting of :attr:`~isaaclab.assets.ArticulationData.default_joint_armature` and :attr:`~isaaclab.assets.ArticulationData.default_joint_friction` attributes in the :class:`~isaaclab.assets.Articulation` class based on user configuration. Changed ^^^^^^^ * Removed unnecessary buffer creation operations inside the :class:`~isaaclab.assets.Articulation` class. Earlier, the class initialized a variety of buffer data with zeros and in the next function assigned them the value from PhysX. This made the code bulkier and more complex for no reason. * Renamed parameters for a consistent nomenclature. These changes are backwards compatible with previous releases with a deprecation warning for the old names. * ``joint_velocity_limits`` → ``joint_vel_limits`` (to match attribute ``joint_vel`` and ``joint_vel_limits``) * ``joint_limits`` → ``joint_pos_limits`` (to match attribute ``joint_pos`` and ``soft_joint_pos_limits``) * ``default_joint_limits`` → ``default_joint_pos_limits`` * ``write_joint_limits_to_sim`` → ``write_joint_position_limit_to_sim`` * ``joint_friction`` → ``joint_friction_coeff`` * ``default_joint_friction`` → ``default_joint_friction_coeff`` * ``write_joint_friction_to_sim`` → ``write_joint_friction_coefficient_to_sim`` * ``fixed_tendon_limit`` → ``fixed_tendon_pos_limits`` * ``default_fixed_tendon_limit`` → ``default_fixed_tendon_pos_limits`` * ``set_fixed_tendon_limit`` → ``set_fixed_tendon_position_limit`` 0.34.13 (2025-03-06) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a new event mode called "prestartup", which gets called right after the scene design is complete and before the simulation is played. * Added a callback to resolve the scene entity configurations separately once the simulation plays, since the scene entities cannot be resolved before the simulation starts playing (as we currently rely on PhysX to provide us with the joint/body ordering) 0.34.12 (2025-03-06) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Updated the mimic API :meth:`target_eef_pose_to_action` in :class:`isaaclab.envs.ManagerBasedRLMimicEnv` to take a dictionary of eef noise values instead of a single noise value. * Added support for optional subtask constraints based on DexMimicGen to the mimic configuration class :class:`isaaclab.envs.MimicEnvCfg`. * Enabled data compression in HDF5 dataset file handler :class:`isaaclab.utils.datasets.hdf5_dataset_file_handler.HDF5DatasetFileHandler`. 0.34.11 (2025-03-04) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed issue in :class:`~isaaclab.sensors.TiledCamera` and :class:`~isaaclab.sensors.Camera` where segmentation outputs only display the first tile when scene instancing is enabled. A workaround is added for now to disable instancing when segmentation outputs are requested. 0.34.10 (2025-03-04) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the issue of misalignment in the motion vectors from the :class:`TiledCamera` with other modalities such as RGBA and depth. 0.34.9 (2025-03-04) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added methods inside the :class:`omni.isaac.lab.assets.Articulation` class to set the joint position and velocity for the articulation. Previously, the joint position and velocity could only be set using the :meth:`omni.isaac.lab.assets.Articulation.write_joint_state_to_sim` method, which didn't allow setting the joint position and velocity separately. 0.34.8 (2025-03-02) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the propagation of the :attr:`activate_contact_sensors` attribute to the :class:`~isaaclab.sim.spawners.wrappers.wrappers_cfg.MultiAssetSpawnerCfg` class. Previously, this value was always set to False, which led to incorrect contact sensor settings for the spawned assets. 0.34.7 (2025-03-02) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Enabled the physics flag for disabling contact processing in the :class:`~isaaclab.sim.SimulationContact` class. This means that by default, no contact reporting is done by the physics engine, which should provide a performance boost in simulations with no contact processing requirements. * Disabled the physics flag for disabling contact processing in the :class:`~isaaclab.sensors.ContactSensor` class when the sensor is created to allow contact reporting for the sensor. Removed ^^^^^^^ * Removed the attribute ``disable_contact_processing`` from :class:`~isaaclab.sim.SimulationContact`. 0.34.6 (2025-03-01) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a new attribute :attr:`is_implicit_model` to the :class:`isaaclab.actuators.ActuatorBase` class to indicate if the actuator model is implicit or explicit. This helps checking that the correct model type is being used when initializing the actuator models. Fixed ^^^^^ * Added copy of configurations to :class:`~isaaclab.assets.AssetBase` and :class:`~isaaclab.sensors.SensorBase` to prevent modifications of the configurations from leaking outside of the classes. * Fixed the case where setting velocity/effort limits for the simulation in the :class:`~isaaclab.actuators.ActuatorBaseCfg` class was not being used to update the actuator-specific velocity/effort limits. Changed ^^^^^^^ * Moved warnings and checks for implicit actuator models to the :class:`~isaaclab.actuators.ImplicitActuator` class. * Reverted to IsaacLab v1.3 behavior where :attr:`isaaclab.actuators.ImplicitActuatorCfg.velocity_limit` attribute was not used for setting the velocity limits in the simulation. This makes it possible to deploy policies from previous release without any changes. If users want to set the velocity limits for the simulation, they should use the :attr:`isaaclab.actuators.ImplicitActuatorCfg.velocity_limit_sim` attribute instead. 0.34.5 (2025-02-28) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added IP address support for WebRTC livestream to allow specifying IP address to stream across networks. This feature requires an updated livestream extension, which is current only available in the pre-built Isaac Lab 2.0.1 docker image. Support for other Isaac Sim builds will become available in Isaac Sim 5.0. 0.34.4 (2025-02-27) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Refactored retargeting code from Se3Handtracking class into separate modules for better modularity * Added scaffolding for developing additional retargeters (e.g. dex) 0.34.3 (2025-02-26) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Enablec specifying the placement of the simulation when viewed in an XR device. This is achieved by adding an ``XrCfg`` environment configuration with ``anchor_pos`` and ``anchor_rot`` parameters. 0.34.2 (2025-02-21) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed setting of root velocities inside the event term :meth:`reset_root_state_from_terrain`. Earlier, the indexing based on the environment IDs was missing. 0.34.1 (2025-02-17) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Ensured that the loaded torch JIT models inside actuator networks are correctly set to eval mode to prevent any unexpected behavior during inference. 0.34.0 (2025-02-14) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added attributes :attr:`velocity_limits_sim` and :attr:`effort_limits_sim` to the :class:`isaaclab.actuators.ActuatorBaseCfg` class to separate solver limits from actuator limits. 0.33.17 (2025-02-13) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed Imu sensor based observations at first step by updating scene during initialization for :class:`~isaaclab.envs.ManagerBasedEnv`, :class:`~isaaclab.envs.DirectRLEnv`, and :class:`~isaaclab.envs.DirectMARLEnv` 0.33.16 (2025-02-09) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Removes old deprecation warning from :attr:`isaaclab.assets.RigidObectData.body_state_w` 0.33.15 (2025-02-09) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed not updating the ``drift`` when calling :func:`~isaaclab.sensors.RayCaster.reset` 0.33.14 (2025-02-01) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed not updating the timestamp of ``body_link_state_w`` and ``body_com_state_w`` when ``write_root_pose_to_sim`` and ``write_joint_state_to_sim`` in the ``Articulation`` class are called. 0.33.13 (2025-01-30) ~~~~~~~~~~~~~~~~~~~~ * Fixed resampling of interval time left for the next event in the :class:`~isaaclab.managers.EventManager` class. Earlier, the time left for interval-based events was not being resampled on episodic resets. This led to the event being triggered at the wrong time after the reset. 0.33.12 (2025-01-28) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed missing import in ``line_plot.py`` 0.33.11 (2025-01-25) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`isaaclab.scene.InteractiveSceneCfg.filter_collisions` to allow specifying whether collision masking across environments is desired. Changed ^^^^^^^ * Automatic collision filtering now happens as part of the replicate_physics call. When replicate_physics is not enabled, we call the previous ``filter_collisions`` API to mask collisions between environments. 0.33.10 (2025-01-22) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * In :meth:`isaaclab.assets.Articulation.write_joint_limits_to_sim`, we previously added a check for if default joint positions exceed the new limits being set. When this is True, we log a warning message to indicate that the default joint positions will be clipped to be within the range of the new limits. However, the warning message can become overly verbose in a randomization setting where this API is called on every environment reset. We now default to only writing the message to info level logging if called within randomization, and expose a parameter that can be used to choose the logging level desired. 0.33.9 (2025-01-22) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed typo in /physics/autoPopupSimulationOutputWindow setting in :class:`~isaaclab.sim.SimulationContext` 0.33.8 (2025-01-17) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Removed deprecation of :attr:`isaaclab.assets.ArticulationData.root_state_w` and :attr:`isaaclab.assets.ArticulationData.body_state_w` derived properties. * Removed deprecation of :meth:`isaaclab.assets.Articulation.write_root_state_to_sim`. * Replaced calls to :attr:`isaaclab.assets.ArticulationData.root_com_state_w` and :attr:`isaaclab.assets.ArticulationData.root_link_state_w` with corresponding calls to :attr:`isaaclab.assets.ArticulationData.root_state_w`. * Replaced calls to :attr:`isaaclab.assets.ArticulationData.body_com_state_w` and :attr:`isaaclab.assets.ArticulationData.body_link_state_w` properties with corresponding calls to :attr:`isaaclab.assets.ArticulationData.body_state_w` properties. * Removed deprecation of :attr:`isaaclab.assets.RigidObjectData.root_state_w` derived properties. * Removed deprecation of :meth:`isaaclab.assets.RigidObject.write_root_state_to_sim`. * Replaced calls to :attr:`isaaclab.assets.RigidObjectData.root_com_state_w` and :attr:`isaaclab.assets.RigidObjectData.root_link_state_w` properties with corresponding calls to :attr:`isaaclab.assets.RigidObjectData.root_state_w` properties. * Removed deprecation of :attr:`isaaclab.assets.RigidObjectCollectionData.root_state_w` derived properties. * Removed deprecation of :meth:`isaaclab.assets.RigidObjectCollection.write_root_state_to_sim`. * Replaced calls to :attr:`isaaclab.assets.RigidObjectCollectionData.root_com_state_w` and :attr:`isaaclab.assets.RigidObjectData.root_link_state_w` properties with corresponding calls to :attr:`isaaclab.assets.RigidObjectData.root_state_w` properties. * Fixed indexing issue in ``write_root_link_velocity_to_sim`` in :class:`isaaclab.assets.RigidObject` * Fixed index broadcasting in ``write_object_link_velocity_to_sim`` and ``write_object_com_pose_to_sim`` in the :class:`isaaclab.assets.RigidObjectCollection` class. 0.33.7 (2025-01-14) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the respawn of only wrong object samples in :func:`repeated_objects_terrain` of :mod:`isaaclab.terrains.trimesh` module. Previously, the function was respawning all objects in the scene instead of only the wrong object samples, which in worst case could lead to infinite respawn loop. 0.33.6 (2025-01-16) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added initial unit tests for multiple tiled cameras, including tests for initialization, groundtruth annotators, different poses, and different resolutions. 0.33.5 (2025-01-13) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Moved the definition of ``/persistent/isaac/asset_root/*`` settings from :class:`AppLauncher` to the app files. This is needed to prevent errors where ``isaaclab_assets`` was loaded prior to the carbonite setting being set. 0.33.4 (2025-01-10) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added an optional parameter in the :meth:`record_pre_reset` method in :class:`~isaaclab.managers.RecorderManager` to override the export config upon invoking. 0.33.3 (2025-01-08) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed docstring in articulation data :class:`isaaclab.assets.ArticulationData`. In body properties sections, the second dimension should be num_bodies but was documented as 1. 0.33.2 (2025-01-02) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added body tracking as an origin type to :class:`isaaclab.envs.ViewerCfg` and :class:`isaaclab.envs.ui.ViewportCameraController`. 0.33.1 (2024-12-26) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added kinematics initialization call for populating kinematic prim transforms to fabric for rendering. * Added ``enable_env_ids`` flag for cloning and replication to replace collision filtering. 0.33.0 (2024-12-22) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed populating default_joint_stiffness and default_joint_damping values for ImplicitActuator instances in :class:`isaaclab.assets.Articulation` 0.32.2 (2024-12-17) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added null-space (position) control option to :class:`isaaclab.controllers.OperationalSpaceController`. * Added test cases that uses null-space control for :class:`isaaclab.controllers.OperationalSpaceController`. * Added information regarding null-space control to the tutorial script and documentation of :class:`isaaclab.controllers.OperationalSpaceController`. * Added arguments to set specific null-space joint position targets within :class:`isaaclab.envs.mdp.actions.OperationalSpaceControllerAction` class. 0.32.1 (2024-12-17) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added a default and generic implementation of the :meth:`get_object_poses` function in the :class:`ManagerBasedRLMimicEnv` class. * Added a ``EXPORT_NONE`` mode in the :class:`DatasetExportMode` class and updated :class:`~isaaclab.managers.RecorderManager` to enable recording without exporting the data to a file. 0.32.0 (2024-12-16) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Previously, physx returns the rigid bodies and articulations velocities in the com of bodies rather than the link frame, while poses are in link frames. We now explicitly provide :attr:`body_link_state` and :attr:`body_com_state` APIs replacing the previous :attr:`body_state` API. Previous APIs are now marked as deprecated. Please update any code using the previous pose and velocity APIs to use the new ``*_link_*`` or ``*_com_*`` APIs in :attr:`isaaclab.assets.RigidBody`, :attr:`isaaclab.assets.RigidBodyCollection`, and :attr:`isaaclab.assets.Articulation`. 0.31.0 (2024-12-16) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`ManagerBasedRLMimicEnv` and config classes for mimic data generation workflow for imitation learning. 0.30.3 (2024-12-16) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed ordering of logging and resamping in the command manager, where we were logging the metrics after resampling the commands. This leads to incorrect logging of metrics when inside the resample call, the metrics tensors get reset. 0.30.2 (2024-12-16) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed errors within the calculations of :class:`isaaclab.controllers.OperationalSpaceController`. Added ^^^^^ * Added :class:`isaaclab.controllers.OperationalSpaceController` to API documentation. * Added test cases for :class:`isaaclab.controllers.OperationalSpaceController`. * Added a tutorial for :class:`isaaclab.controllers.OperationalSpaceController`. * Added the implementation of :class:`isaaclab.envs.mdp.actions.OperationalSpaceControllerAction` class. 0.30.1 (2024-12-15) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added call to update articulation kinematics after reset to ensure states are updated for non-rendering sensors. Previously, some changes in reset such as modifying joint states would not be reflected in the rigid body states immediately after reset. 0.30.0 (2024-12-15) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added UI interface to the Managers in the ManagerBasedEnv and MangerBasedRLEnv classes. * Added UI widgets for :class:`LiveLinePlot` and :class:`ImagePlot`. * Added ``ManagerLiveVisualizer/Cfg``: Given a ManagerBase (i.e. action_manager, observation_manager, etc) and a config file this class creates the the interface between managers and the UI. * Added :class:`EnvLiveVisualizer`: A 'manager' of ManagerLiveVisualizer. This is added to the ManagerBasedEnv but is only called during the initialization of the managers in load_managers * Added ``get_active_iterable_terms`` implementation methods to ActionManager, ObservationManager, CommandsManager, CurriculumManager, RewardManager, and TerminationManager. This method exports the active term data and labels for each manager and is called by ManagerLiveVisualizer. * Additions to :class:`BaseEnvWindow` and :class:`RLEnvWindow` to register ManagerLiveVisualizer UI interfaces for the chosen managers. 0.29.0 (2024-12-15) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added observation history computation to :class:`isaaclab.manager.observation_manager.ObservationManager`. * Added ``history_length`` and ``flatten_history_dim`` configuration parameters to :class:`isaaclab.manager.manager_term_cfg.ObservationTermCfg` * Added ``history_length`` and ``flatten_history_dim`` configuration parameters to :class:`isaaclab.manager.manager_term_cfg.ObservationGroupCfg` * Added full buffer property to :class:`isaaclab.utils.buffers.circular_buffer.CircularBuffer` 0.28.4 (2024-12-15) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added action clip to all :class:`isaaclab.envs.mdp.actions`. 0.28.3 (2024-12-14) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added check for error below threshold in state machines to ensure the state has been reached. 0.28.2 (2024-12-13) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the shape of ``quat_w`` in the ``apply_actions`` method of :attr:`~isaaclab.env.mdp.NonHolonomicAction` (previously (N,B,4), now (N,4) since the number of root bodies B is required to be 1). Previously ``apply_actions`` errored because ``euler_xyz_from_quat`` requires inputs of shape (N,4). 0.28.1 (2024-12-13) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the internal buffers for ``set_external_force_and_torque`` where the buffer values would be stale if zero values are sent to the APIs. 0.28.0 (2024-12-12) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Adapted the :class:`~isaaclab.sim.converters.UrdfConverter` to use the latest URDF converter API from Isaac Sim 4.5. The physics articulation root can now be set separately, and the joint drive gains can be set on a per joint basis. 0.27.33 (2024-12-11) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Introduced an optional ``sensor_cfg`` parameter to the :meth:`~isaaclab.envs.mdp.rewards.base_height_l2` function, enabling the use of :class:`~isaaclab.sensors.RayCaster` for height adjustments. For flat terrains, the function retains its previous behavior. * Improved documentation to clarify the usage of the :meth:`~isaaclab.envs.mdp.rewards.base_height_l2` function in both flat and rough terrain settings. 0.27.32 (2024-12-11) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Modified :class:`isaaclab.envs.mdp.actions.DifferentialInverseKinematicsAction` class to use the geometric Jacobian computed w.r.t. to the root frame of the robot. This helps ensure that root pose does not affect the tracking. 0.27.31 (2024-12-09) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Introduced configuration options in :class:`Se3HandTracking` to: - Zero out rotation around the x/y axes - Apply smoothing and thresholding to position and rotation deltas for reduced jitter - Use wrist-based rotation reference as an alternative to fingertip-based rotation * Switched the default position reference in :class:`Se3HandTracking` to the wrist joint pose, providing more stable relative-based positioning. 0.27.30 (2024-12-09) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the initial state recorder term in :class:`isaaclab.envs.mdp.recorders.InitialStateRecorder` to return only the states of the specified environment IDs. 0.27.29 (2024-12-06) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the enforcement of :attr:`~isaaclab.actuators.ActuatorBaseCfg.velocity_limits` at the :attr:`~isaaclab.assets.Articulation.root_physx_view` level. 0.27.28 (2024-12-06) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * If a USD that contains an articulation root is loaded using a :attr:`isaaclab.assets.RigidBody` we now fail unless the articulation root is explicitly disabled. Using an articulation root for rigid bodies is not needed and decreases overall performance. 0.27.27 (2024-12-06) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Corrected the projection types of fisheye camera in :class:`isaaclab.sim.spawners.sensors.sensors_cfg.FisheyeCameraCfg`. Earlier, the projection names used snakecase instead of camelcase. 0.27.26 (2024-12-06) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added option to define the clipping behavior for depth images generated by :class:`~isaaclab.sensors.RayCasterCamera`, :class:`~isaaclab.sensors.Camera`, and :class:`~isaaclab.sensors.TiledCamera` Changed ^^^^^^^ * Unified the clipping behavior for the depth images of all camera implementations. Per default, all values exceeding the range are clipped to zero for both ``distance_to_image_plane`` and ``distance_to_camera`` depth images. Prev. :class:`~isaaclab.sensors.RayCasterCamera` clipped the values to the maximum value of the depth image, :class:`~isaaclab.sensors.Camera` did not clip them and had a different behavior for both types. 0.27.25 (2024-12-05) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the condition in ``isaaclab.sh`` that checks whether ``pre-commit`` is installed before attempting installation. 0.27.24 (2024-12-05) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Removed workaround in :class:`isaaclab.sensors.TiledCamera` and :class:`isaaclab.sensors.Camera` that was previously required to prevent frame offsets in renders. The denoiser setting is no longer automatically modified based on the resolution of the cameras. 0.27.23 (2024-12-04) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added the attributes :attr:`~isaaclab.envs.DirectRLEnvCfg.wait_for_textures` and :attr:`~isaaclab.envs.ManagerBasedEnvCfg.wait_for_textures` to enable assets loading check during :class:`~isaaclab.DirectRLEnv` and :class:`~isaaclab.ManagerBasedEnv` reset method when rtx sensors are added to the scene. 0.27.22 (2024-12-04) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the order of the incoming parameters in :class:`isaaclab.envs.DirectMARLEnv` to correctly use ``NoiseModel`` in marl-envs. 0.27.21 (2024-12-04) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.managers.RecorderManager` and its utility classes to record data from the simulation. * Added :class:`~isaaclab.utils.datasets.EpisodeData` to store data for an episode. * Added :class:`~isaaclab.utils.datasets.DatasetFileHandlerBase` as a base class for handling dataset files. * Added :class:`~isaaclab.utils.datasets.HDF5DatasetFileHandler` as a dataset file handler implementation to export and load episodes from HDF5 files. * Added ``record_demos.py`` script to record human-teleoperated demos for a specified task and export to an HDF5 file. * Added ``replay_demos.py`` script to replay demos loaded from an HDF5 file. 0.27.20 (2024-12-02) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed :class:`isaaclab.envs.DirectMARLEnv` to inherit from ``Gymnasium.Env`` due to requirement from Gymnasium v1.0.0 requiring all environments to be a subclass of ``Gymnasium.Env`` when using the ``make`` interface. 0.27.19 (2024-12-02) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``isaaclab.utils.pretrained_checkpoints`` containing constants and utility functions used to manipulate paths and load checkpoints from Nucleus. 0.27.18 (2024-11-28) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Renamed Isaac Sim imports to follow Isaac Sim 4.5 naming conventions. 0.27.17 (2024-11-20) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``create_new_stage`` setting in :class:`~isaaclab.app.AppLauncher` to avoid creating a default new stage on startup in Isaac Sim. This helps reduce the startup time when launching Isaac Lab. 0.27.16 (2024-11-15) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the class :class:`~isaaclab.devices.Se3HandTracking` which enables XR teleop for manipulators. 0.27.15 (2024-11-09) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed indexing in :meth:`isaaclab.assets.Articulation.write_joint_limits_to_sim` to correctly process non-None ``env_ids`` and ``joint_ids``. 0.27.14 (2024-10-23) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the class :class:`~isaaclab.assets.RigidObjectCollection` which allows to spawn multiple objects in each environment and access/modify the quantities with a unified (env_ids, object_ids) API. 0.27.13 (2024-10-30) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the attributes :attr:`~isaaclab.sim.converters.MeshConverterCfg.translation`, :attr:`~isaaclab.sim.converters.MeshConverterCfg.rotation`, :attr:`~isaaclab.sim.converters.MeshConverterCfg.scale` to translate, rotate, and scale meshes when importing them with :class:`~isaaclab.sim.converters.MeshConverter`. 0.27.12 (2024-11-04) ~~~~~~~~~~~~~~~~~~~~ Removed ^^^^^^^ * Removed TensorDict usage in favor of Python dictionary in sensors 0.27.11 (2024-10-31) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support to define tuple of floats to scale observation terms by expanding the :attr:`isaaclab.managers.manager_term_cfg.ObservationManagerCfg.scale` attribute. 0.27.10 (2024-11-01) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Cached the PhysX view's joint paths before looping over them when processing fixed joint tendons inside the :class:`Articulation` class. This helps improve the processing time for the tendons. 0.27.9 (2024-11-01) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the :class:`isaaclab.utils.types.ArticulationActions` class to store the joint actions for an articulation. Earlier, the class from Isaac Sim was being used. However, it used a different type for the joint actions which was not compatible with the Isaac Lab framework. 0.27.8 (2024-11-01) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added sanity check if the term is a valid type inside the command manager. * Corrected the iteration over ``group_cfg_items`` inside the observation manager. 0.27.7 (2024-10-28) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added frozen encoder feature extraction observation space with ResNet and Theia 0.27.6 (2024-10-25) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed usage of ``meshes`` property in :class:`isaaclab.sensors.RayCasterCamera` to use ``self.meshes`` instead of the undefined ``RayCaster.meshes``. * Fixed issue in :class:`isaaclab.envs.ui.BaseEnvWindow` where undefined configs were being accessed when creating debug visualization elements in UI. 0.27.5 (2024-10-25) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added utilities for serializing/deserializing Gymnasium spaces. 0.27.4 (2024-10-18) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Updated installation path instructions for Windows in the Isaac Lab documentation to remove redundancy in the use of %USERPROFILE% for path definitions. 0.27.3 (2024-10-22) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the issue with using list or tuples of ``configclass`` within a ``configclass``. Earlier, the list of configclass objects were not converted to dictionary properly when ``to_dict`` function was called. 0.27.2 (2024-10-21) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``--kit_args`` to :class:`~isaaclab.app.AppLauncher` to allow passing command line arguments directly to Omniverse Kit SDK. 0.27.1 (2024-10-20) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`~isaaclab.sim.RenderCfg` and the attribute :attr:`~isaaclab.sim.SimulationCfg.render` for specifying render related settings. 0.27.0 (2024-10-14) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a method to :class:`~isaaclab.utils.configclass` to check for attributes with values of type ``MISSING``. This is useful when the user wants to check if a certain attribute has been set or not. * Added the configuration validation check inside the constructor of all the core classes (such as sensor base, asset base, scene and environment base classes). * Added support for environments without commands by leaving the attribute :attr:`isaaclab.envs.ManagerBasedRLEnvCfg.commands` as None. Before, this had to be done using the class :class:`isaaclab.command_generators.NullCommandGenerator`. * Moved the ``meshes`` attribute in the :class:`isaaclab.sensors.RayCaster` class from class variable to instance variable. This prevents the meshes to overwrite each other. 0.26.0 (2024-10-16) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added Imu sensor implementation that directly accesses the physx view :class:`isaaclab.sensors.Imu`. The sensor comes with a configuration class :class:`isaaclab.sensors.ImuCfg` and data class :class:`isaaclab.sensors.ImuData`. * Moved and renamed :meth:`isaaclab.sensors.camera.utils.convert_orientation_convention` to :meth:`isaaclab.utils.math.convert_camera_frame_orientation_convention` * Moved :meth:`isaaclab.sensors.camera.utils.create_rotation_matrix_from_view` to :meth:`isaaclab.utils.math.create_rotation_matrix_from_view` 0.25.2 (2024-10-16) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for different Gymnasium spaces (``Box``, ``Discrete``, ``MultiDiscrete``, ``Tuple`` and ``Dict``) to define observation, action and state spaces in the direct workflow. * Added :meth:`sample_space` to environment utils to sample supported spaces where data containers are torch tensors. Changed ^^^^^^^ * Mark the :attr:`num_observations`, :attr:`num_actions` and :attr:`num_states` in :class:`DirectRLEnvCfg` as deprecated in favor of :attr:`observation_space`, :attr:`action_space` and :attr:`state_space` respectively. * Mark the :attr:`num_observations`, :attr:`num_actions` and :attr:`num_states` in :class:`DirectMARLEnvCfg` as deprecated in favor of :attr:`observation_spaces`, :attr:`action_spaces` and :attr:`state_space` respectively. 0.25.1 (2024-10-10) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed potential issue where default joint positions can fall outside of the limits being set with Articulation's ``write_joint_limits_to_sim`` API. 0.25.0 (2024-10-06) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added configuration classes for spawning assets from a list of individual asset configurations randomly at the specified prim paths. 0.24.20 (2024-10-07) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the :meth:`isaaclab.envs.mdp.events.randomize_rigid_body_material` function to correctly sample friction and restitution from the given ranges. 0.24.19 (2024-10-05) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added new functionalities to the FrameTransformer to make it more general. It is now possible to track: * Target frames that aren't children of the source frame prim_path * Target frames that are based upon the source frame prim_path 0.24.18 (2024-10-04) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixes parsing and application of ``size`` parameter for :class:`~isaaclab.sim.spawn.GroundPlaneCfg` to correctly scale the grid-based ground plane. 0.24.17 (2024-10-04) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the deprecation notice for using ``pxr.Semantics``. The corresponding modules use ``Semantics`` module directly. 0.24.16 (2024-10-03) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Renamed the observation function :meth:`grab_images` to :meth:`image` to follow convention of noun-based naming. * Renamed the function :meth:`convert_perspective_depth_to_orthogonal_depth` to a shorter name :meth:`isaaclab.utils.math.orthogonalize_perspective_depth`. 0.24.15 (2024-09-20) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :meth:`grab_images` to be able to use images for an observation term in manager-based environments. 0.24.14 (2024-09-20) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the method :meth:`convert_perspective_depth_to_orthogonal_depth` to convert perspective depth images to orthogonal depth images. This is useful for the :meth:`~isaaclab.utils.math.unproject_depth`, since it expects orthogonal depth images as inputs. 0.24.13 (2024-09-08) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Moved the configuration of visualization markers for the command terms to their respective configuration classes. This allows users to modify the markers for the command terms without having to modify the command term classes. 0.24.12 (2024-09-18) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed outdated fetching of articulation data by using the method ``update_articulations_kinematic`` in :class:`isaaclab.assets.ArticulationData`. Before if an articulation was moved during a reset, the pose of the links were outdated if fetched before the next physics step. Adding this method ensures that the pose of the links is always up-to-date. Similarly ``update_articulations_kinematic`` was added before any render step to ensure that the articulation displays correctly after a reset. 0.24.11 (2024-09-11) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added skrl's JAX environment variables to :class:`~isaaclab.app.AppLauncher` to support distributed multi-GPU and multi-node training using JAX 0.24.10 (2024-09-10) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added config class, support, and tests for MJCF conversion via standalone python scripts. 0.24.9 (2024-09-09) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a seed parameter to the :attr:`isaaclab.envs.ManagerBasedEnvCfg` and :attr:`isaaclab.envs.DirectRLEnvCfg` classes to set the seed for the environment. This seed is used to initialize the random number generator for the environment. * Adapted the workflow scripts to set the seed for the environment using the seed specified in the learning agent's configuration file or the command line argument. This ensures that the simulation results are reproducible across different runs. 0.24.8 (2024-09-08) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Modified:meth:`quat_rotate` and :meth:`quat_rotate_inverse` operations to use :meth:`torch.einsum` for faster processing of high dimensional input tensors. 0.24.7 (2024-09-06) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for property attributes in the :meth:``isaaclab.utils.configclass`` method. Earlier, the configclass decorator failed to parse the property attributes correctly and made them instance variables instead. 0.24.6 (2024-09-05) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Adapted the ``A`` and ``D`` button bindings inside :meth:`isaaclab.device.Se3Keyboard` to make them now more-intuitive to control the y-axis motion based on the right-hand rule. 0.24.5 (2024-08-29) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added alternative data type "distance_to_camera" in :class:`isaaclab.sensors.TiledCamera` class to be consistent with all other cameras (equal to type "depth"). 0.24.4 (2024-09-02) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added missing SI units to the documentation of :class:`isaaclab.sensors.Camera` and :class:`isaaclab.sensors.RayCasterCamera`. * Added test to check :attr:`isaaclab.sensors.RayCasterCamera.set_intrinsic_matrices` 0.24.3 (2024-08-29) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the support for class-bounded methods when creating a configclass out of them. Earlier, these methods were being made as instance methods which required initialization of the class to call the class-methods. 0.24.2 (2024-08-28) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a class method to initialize camera configurations with an intrinsic matrix in the :class:`isaaclab.sim.spawner.sensors.PinholeCameraCfg` :class:`isaaclab.sensors.ray_caster.patterns_cfg.PinholeCameraPatternCfg` classes. Fixed ^^^^^ * Fixed the ray direction in :func:`isaaclab.sensors.ray_caster.patterns.patterns.pinhole_camera_pattern` to point to the center of the pixel instead of the top-left corner. * Fixed the clipping of the "distance_to_image_plane" depth image obtained using the :class:`isaaclab.sensors.ray_caster.RayCasterCamera` class. Earlier, the depth image was being clipped before the depth image was generated. Now, the clipping is applied after the depth image is generated. This makes the behavior equal to the USD Camera. 0.24.1 (2024-08-21) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Disabled default viewport in certain headless scenarios for better performance. 0.24.0 (2024-08-17) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added additional annotators for :class:`isaaclab.sensors.camera.TiledCamera` class. Changed ^^^^^^^ * Updated :class:`isaaclab.sensors.TiledCamera` to latest RTX tiled rendering API. * Single channel outputs for :class:`isaaclab.sensors.TiledCamera`, :class:`isaaclab.sensors.Camera` and :class:`isaaclab.sensors.RayCasterCamera` now has shape (H, W, 1). * Data type for RGB output for :class:`isaaclab.sensors.TiledCamera` changed from ``torch.float`` to ``torch.uint8``. * Dimension of RGB output for :class:`isaaclab.sensors.Camera` changed from (H, W, 4) to (H, W, 3). Use type ``rgba`` to retrieve the previous dimension. 0.23.1 (2024-08-17) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Updated torch to version 2.4.0. 0.23.0 (2024-08-16) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added direct workflow base class :class:`isaaclab.envs.DirectMARLEnv` for multi-agent environments. 0.22.1 (2024-08-17) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added APIs to interact with the physics simulation of deformable objects. This includes setting the material properties, setting kinematic targets, and getting the state of the deformable object. For more information, please refer to the :mod:`isaaclab.assets.DeformableObject` class. 0.22.0 (2024-08-14) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :mod:`~isaaclab.utils.modifiers` module to provide framework for configurable and custom observation data modifiers. * Adapted the :class:`~isaaclab.managers.ObservationManager` class to support custom modifiers. These are applied to the observation data before applying any noise or scaling operations. 0.21.2 (2024-08-13) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Moved event mode-based checks in the :meth:`isaaclab.managers.EventManager.apply` method outside the loop that iterates over the event terms. This prevents unnecessary checks and improves readability. * Fixed the logic for global and per environment interval times when using the "interval" mode inside the event manager. Earlier, the internal lists for these times were of unequal lengths which led to wrong indexing inside the loop that iterates over the event terms. 0.21.1 (2024-08-06) ~~~~~~~~~~~~~~~~~~~ * Added a flag to preserve joint ordering inside the :class:`isaaclab.envs.mdp.JointAction` action term. 0.21.0 (2024-08-05) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the command line argument ``--device`` in :class:`~isaaclab.app.AppLauncher`. Valid options are: * ``cpu``: Use CPU. * ``cuda``: Use GPU with device ID ``0``. * ``cuda:N``: Use GPU, where N is the device ID. For example, ``cuda:0``. The default value is ``cuda:0``. Changed ^^^^^^^ * Simplified setting the device throughout the code by relying on :attr:`isaaclab.sim.SimulationCfg.device` to activate gpu/cpu pipelines. Removed ^^^^^^^ * Removed the parameter :attr:`isaaclab.sim.SimulationCfg.use_gpu_pipeline`. This is now directly inferred from :attr:`isaaclab.sim.SimulationCfg.device`. * Removed the command line input argument ``--device_id`` in :class:`~isaaclab.app.AppLauncher`. The device id can now be set using the ``--device`` argument, for example with ``--device cuda:0``. 0.20.8 (2024-08-02) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the handling of observation terms with different shapes in the :class:`~isaaclab.managers.ObservationManager` class. Earlier, the constructor would throw an error if the shapes of the observation terms were different. Now, this operation only happens when the terms in an observation group are being concatenated. Otherwise, the terms are stored as a dictionary of tensors. * Improved the error message when the observation terms are not of the same shape in the :class:`~isaaclab.managers.ObservationManager` class and the terms are being concatenated. 0.20.7 (2024-08-02) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Performance improvements for material randomization in events. Added ^^^^^ * Added minimum randomization frequency for reset mode randomizations. 0.20.6 (2024-08-02) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Removed the hierarchy from :class:`~isaaclab.assets.RigidObject` class to :class:`~isaaclab.assets.Articulation` class. Previously, the articulation class overrode almost all the functions of the rigid object class making the hierarchy redundant. Now, the articulation class is a standalone class that does not inherit from the rigid object class. This does add some code duplication but the simplicity and clarity of the code is improved. 0.20.5 (2024-08-02) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :attr:`isaaclab.terrain.TerrainGeneratorCfg.border_height` to set the height of the border around the terrain. 0.20.4 (2024-08-02) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the caching of terrains when using the :class:`isaaclab.terrains.TerrainGenerator` class. Earlier, the random sampling of the difficulty levels led to different hash values for the same terrain configuration. This caused the terrains to be re-generated even when the same configuration was used. Now, the numpy random generator is seeded with the same seed to ensure that the difficulty levels are sampled in the same order between different runs. 0.20.3 (2024-08-02) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the setting of translation and orientation when spawning a mesh prim. Earlier, the translation and orientation was being applied both on the parent Xform and the mesh prim. This was causing the mesh prim to be offset by the translation and orientation of the parent Xform, which is not the intended behavior. 0.20.2 (2024-08-02) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Modified the computation of body acceleration for rigid body data to use PhysX APIs instead of numerical finite-differencing. This removes the need for computation of body acceleration at every update call of the data buffer. 0.20.1 (2024-07-30) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the :meth:`isaaclab.utils.math.wrap_to_pi` method to handle the wrapping of angles correctly. Earlier, the method was not wrapping the angles to the range [-pi, pi] correctly when the angles were outside the range [-2*pi, 2*pi]. 0.20.0 (2024-07-26) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Support for the Isaac Sim 4.1.0 release. Removed ^^^^^^^ * The ``mdp.add_body_mass`` method in the events. Please use the :meth:`isaaclab.envs.mdp.randomize_rigid_body_mass` method instead. * The classes ``managers.RandomizationManager`` and ``managers.RandomizationTermCfg`` are replaced with :class:`isaaclab.managers.EventManager` and :class:`isaaclab.managers.EventTermCfg` classes. * The following properties in :class:`isaaclab.sensors.FrameTransformerData`: * ``target_rot_source`` --> :attr:`~isaaclab.sensors.FrameTransformerData.target_quat_w` * ``target_rot_w`` --> :attr:`~isaaclab.sensors.FrameTransformerData.target_quat_source` * ``source_rot_w`` --> :attr:`~isaaclab.sensors.FrameTransformerData.source_quat_w` * The kit experience file ``isaaclab.backwards.compatible.kit``. This is followed by dropping the support for Isaac Sim 2023.1.1 completely. 0.19.4 (2024-07-13) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added the call to "startup" events when using the :class:`~isaaclab.envs.ManagerBasedEnv` class. Earlier, the "startup" events were not being called when the environment was initialized. This issue did not occur when using the :class:`~isaaclab.envs.ManagerBasedRLEnv` class since the "startup" events were called in the constructor. 0.19.3 (2024-07-13) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added schemas for setting and modifying deformable body properties on a USD prim. * Added API to spawn a deformable body material in the simulation. * Added APIs to spawn rigid and deformable meshes of primitive shapes (cone, cylinder, sphere, box, capsule) in the simulation. This is possible through the :mod:`isaaclab.sim.spawners.meshes` module. 0.19.2 (2024-07-05) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Modified cloning scheme based on the attribute :attr:`~isaaclab.scene.InteractiveSceneCfg.replicate_physics` to determine whether environment is homogeneous or heterogeneous. 0.19.1 (2024-07-05) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a lidar pattern function :func:`~isaaclab.sensors.ray_caster.patterns.patterns.lidar_pattern` with corresponding config :class:`~isaaclab.sensors.ray_caster.patterns_cfg.LidarPatternCfg`. 0.19.0 (2024-07-04) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed parsing of articulations with nested rigid links while using the :class:`isaaclab.assets.Articulation` class. Earlier, the class initialization failed when the articulation had nested rigid links since the rigid links were not being parsed correctly by the PhysX view. Removed ^^^^^^^ * Removed the attribute :attr:`body_physx_view` from the :class:`isaaclab.assets.Articulation` and :class:`isaaclab.assets.RigidObject` classes. These were causing confusions when used with articulation view since the body names were not following the same ordering. * Dropped support for Isaac Sim 2023.1.1. The minimum supported version is now Isaac Sim 4.0.0. 0.18.6 (2024-07-01) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the environment stepping logic. Earlier, the environments' rendering logic was updating the kit app which would in turn step the physics :attr:`isaaclab.sim.SimulationCfg.render_interval` times. Now, a render call only does rendering and does not step the physics. 0.18.5 (2024-06-26) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the gravity vector direction used inside the :class:`isaaclab.assets.RigidObjectData` class. Earlier, the gravity direction was hard-coded as (0, 0, -1) which may be different from the actual gravity direction in the simulation. Now, the gravity direction is obtained from the simulation context and used to compute the projection of the gravity vector on the object. 0.18.4 (2024-06-26) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed double reference count of the physics sim view inside the asset classes. This was causing issues when destroying the asset class instance since the physics sim view was not being properly released. Added ^^^^^ * Added the attribute :attr:`~isaaclab.assets.AssetBase.is_initialized` to check if the asset and sensor has been initialized properly. This can be used to ensure that the asset or sensor is ready to use in the simulation. 0.18.3 (2024-06-25) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the docstrings at multiple places related to the different buffer implementations inside the :mod:`isaaclab.utils.buffers` module. The docstrings were not clear and did not provide enough information about the classes and their methods. Added ^^^^^ * Added the field for fixed tendom names in the :class:`isaaclab.assets.ArticulationData` class. Earlier, this information was not exposed which was inconsistent with other name related information such as joint or body names. Changed ^^^^^^^ * Renamed the fields ``min_num_time_lags`` and ``max_num_time_lags`` to ``min_delay`` and ``max_delay`` in the :class:`isaaclab.actuators.DelayedPDActuatorCfg` class. This is to make the naming simpler to understand. 0.18.2 (2024-06-25) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Moved the configuration for tile-rendered camera into its own file named ``tiled_camera_cfg.py``. This makes it easier to follow where the configuration is located and how it is related to the class. 0.18.1 (2024-06-25) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Ensured that a parity between class and its configuration class is explicitly visible in the :mod:`isaaclab.envs` module. This makes it easier to follow where definitions are located and how they are related. This should not be a breaking change as the classes are still accessible through the same module. 0.18.0 (2024-06-13) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the rendering logic to render at the specified interval. Earlier, the substep parameter had no effect and rendering would happen once every env.step() when active. Changed ^^^^^^^ * Renamed :attr:`isaaclab.sim.SimulationCfg.substeps` to :attr:`isaaclab.sim.SimulationCfg.render_interval`. The render logic is now integrated in the decimation loop of the environment. 0.17.13 (2024-06-13) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the orientation reset logic in :func:`isaaclab.envs.mdp.events.reset_root_state_uniform` to make it relative to the default orientation. Earlier, the position was sampled relative to the default and the orientation not. 0.17.12 (2024-06-13) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the class :class:`isaaclab.utils.buffers.TimestampedBuffer` to store timestamped data. Changed ^^^^^^^ * Added time-stamped buffers in the classes :class:`isaaclab.assets.RigidObjectData` and :class:`isaaclab.assets.ArticulationData` to update some values lazily and avoid unnecessary computations between physics updates. Before, all the data was always updated at every step, even if it was not used by the task. 0.17.11 (2024-05-30) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed :class:`isaaclab.sensor.ContactSensor` not loading correctly in extension mode. Earlier, the :attr:`isaaclab.sensor.ContactSensor.body_physx_view` was not initialized when :meth:`isaaclab.sensor.ContactSensor._debug_vis_callback` is called which references it. 0.17.10 (2024-05-30) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed compound classes being directly assigned in ``default_factory`` generator method :meth:`isaaclab.utils.configclass._return_f`, which resulted in shared references such that modifications to compound objects were reflected across all instances generated from the same ``default_factory`` method. 0.17.9 (2024-05-30) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``variants`` attribute to the :class:`isaaclab.sim.from_files.UsdFileCfg` class to select USD variants when loading assets from USD files. 0.17.8 (2024-05-28) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Implemented the reset methods in the action terms to avoid returning outdated data. 0.17.7 (2024-05-28) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added debug visualization utilities in the :class:`isaaclab.managers.ActionManager` class. 0.17.6 (2024-05-27) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``wp.init()`` call in Warp utils. 0.17.5 (2024-05-22) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Websocket livestreaming is no longer supported. Valid livestream options are {0, 1, 2}. * WebRTC livestream is now set with livestream=2. 0.17.4 (2024-05-17) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Modified the noise functions to also support add, scale, and abs operations on the data. Added aliases to ensure backward compatibility with the previous functions. * Added :attr:`isaaclab.utils.noise.NoiseCfg.operation` for the different operations. * Renamed ``constant_bias_noise`` to :func:`isaaclab.utils.noise.constant_noise`. * Renamed ``additive_uniform_noise`` to :func:`isaaclab.utils.noise.uniform_noise`. * Renamed ``additive_gaussian_noise`` to :func:`isaaclab.utils.noise.gaussian_noise`. 0.17.3 (2024-05-15) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Set ``hide_ui`` flag in the app launcher for livestream. * Fix native client livestream extensions. 0.17.2 (2024-05-09) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Renamed ``_range`` to ``distribution_params`` in ``events.py`` for methods that defined a distribution. * Apply additive/scaling randomization noise on default data instead of current data. * Changed material bucketing logic to prevent exceeding 64k materials. Fixed ^^^^^ * Fixed broadcasting issues with indexing when environment and joint IDs are provided. * Fixed incorrect tensor dimensions when setting a subset of environments. Added ^^^^^ * Added support for randomization of fixed tendon parameters. * Added support for randomization of dof limits. * Added support for randomization of gravity. * Added support for Gaussian sampling. * Added default buffers to Articulation/Rigid object data classes for randomization. 0.17.1 (2024-05-10) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added attribute :attr:`isaaclab.sim.converters.UrdfConverterCfg.override_joint_dynamics` to properly parse joint dynamics in :class:`isaaclab.sim.converters.UrdfConverter`. 0.17.0 (2024-05-07) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Renamed ``BaseEnv`` to :class:`isaaclab.envs.ManagerBasedEnv`. * Renamed ``base_env.py`` to ``manager_based_env.py``. * Renamed ``BaseEnvCfg`` to :class:`isaaclab.envs.ManagerBasedEnvCfg`. * Renamed ``RLTaskEnv`` to :class:`isaaclab.envs.ManagerBasedRLEnv`. * Renamed ``rl_task_env.py`` to ``manager_based_rl_env.py``. * Renamed ``RLTaskEnvCfg`` to :class:`isaaclab.envs.ManagerBasedRLEnvCfg`. * Renamed ``rl_task_env_cfg.py`` to ``rl_env_cfg.py``. * Renamed ``OIGEEnv`` to :class:`isaaclab.envs.DirectRLEnv`. * Renamed ``oige_env.py`` to ``direct_rl_env.py``. * Renamed ``RLTaskEnvWindow`` to :class:`isaaclab.envs.ui.ManagerBasedRLEnvWindow`. * Renamed ``rl_task_env_window.py`` to ``manager_based_rl_env_window.py``. * Renamed all references of ``BaseEnv``, ``BaseEnvCfg``, ``RLTaskEnv``, ``RLTaskEnvCfg``, ``OIGEEnv``, and ``RLTaskEnvWindow``. Added ^^^^^ * Added direct workflow base class :class:`isaaclab.envs.DirectRLEnv`. 0.16.4 (2024-05-06) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added :class:`isaaclab.sensors.TiledCamera` to support tiled rendering with RGB and depth. 0.16.3 (2024-04-26) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed parsing of filter prim path expressions in the :class:`isaaclab.sensors.ContactSensor` class. Earlier, the filter prim paths given to the physics view was not being parsed since they were specified as regex expressions instead of glob expressions. 0.16.2 (2024-04-25) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Simplified the installation procedure, isaaclab -e is no longer needed * Updated torch dependency to 2.2.2 0.16.1 (2024-04-20) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added attribute :attr:`isaaclab.sim.ArticulationRootPropertiesCfg.fix_root_link` to fix the root link of an articulation to the world frame. 0.16.0 (2024-04-16) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the function :meth:`isaaclab.utils.math.quat_unique` to standardize quaternion representations, i.e. always have a non-negative real part. * Added events terms for randomizing mass by scale, simulation joint properties (stiffness, damping, armature, and friction) Fixed ^^^^^ * Added clamping of joint positions and velocities in event terms for resetting joints. The simulation does not throw an error if the set values are out of their range. Hence, users are expected to clamp them before setting. * Fixed :class:`isaaclab.envs.mdp.EMAJointPositionToLimitsActionCfg` to smoothen the actions at environment frequency instead of simulation frequency. * Renamed the following functions in :meth:`isaaclab.envs.mdp` to avoid confusions: * Observation: :meth:`joint_pos_norm` -> :meth:`joint_pos_limit_normalized` * Action: :class:`ExponentialMovingAverageJointPositionAction` -> :class:`EMAJointPositionToLimitsAction` * Termination: :meth:`base_height` -> :meth:`root_height_below_minimum` * Termination: :meth:`joint_pos_limit` -> :meth:`joint_pos_out_of_limit` * Termination: :meth:`joint_pos_manual_limit` -> :meth:`joint_pos_out_of_manual_limit` * Termination: :meth:`joint_vel_limit` -> :meth:`joint_vel_out_of_limit` * Termination: :meth:`joint_vel_manual_limit` -> :meth:`joint_vel_out_of_manual_limit` * Termination: :meth:`joint_torque_limit` -> :meth:`joint_effort_out_of_limit` Deprecated ^^^^^^^^^^ * Deprecated the function :meth:`isaaclab.envs.mdp.add_body_mass` in favor of :meth:`isaaclab.envs.mdp.randomize_rigid_body_mass`. This supports randomizing the mass based on different operations (add, scale, or set) and sampling distributions. 0.15.13 (2024-04-16) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Improved startup performance by enabling rendering-based extensions only when necessary and caching of nucleus directory. * Renamed the flag ``OFFSCREEN_RENDER`` or ``--offscreen_render`` to ``ENABLE_CAMERAS`` or ``--enable_cameras`` respectively. 0.15.12 (2024-04-16) ~~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Replaced calls to the ``check_file_path`` function in the :mod:`isaaclab.sim.spawners.from_files` with the USD stage resolve identifier function. This helps speed up the loading of assets from file paths by avoiding Nucleus server calls. 0.15.11 (2024-04-15) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the :meth:`isaaclab.sim.SimulationContext.has_rtx_sensors` method to check if any RTX-related sensors such as cameras have been created in the simulation. This is useful to determine if simulation requires RTX rendering during step or not. Fixed ^^^^^ * Fixed the rendering of RTX-related sensors such as cameras inside the :class:`isaaclab.envs.RLTaskEnv` class. Earlier the rendering did not happen inside the step function, which caused the sensor data to be empty. 0.15.10 (2024-04-11) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed sharing of the same memory address between returned tensors from observation terms in the :class:`isaaclab.managers.ObservationManager` class. Earlier, the returned tensors could map to the same memory address, causing issues when the tensors were modified during scaling, clipping or other operations. 0.15.9 (2024-04-04) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed assignment of individual termination terms inside the :class:`isaaclab.managers.TerminationManager` class. Earlier, the terms were being assigned their values through an OR operation which resulted in incorrect values. This regression was introduced in version 0.15.1. 0.15.8 (2024-04-02) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added option to define ordering of points for the mesh-grid generation in the :func:`isaaclab.sensors.ray_caster.patterns.grid_pattern`. This parameter defaults to 'xy' for backward compatibility. 0.15.7 (2024-03-28) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Adds option to return indices/data in the specified query keys order in :class:`isaaclab.managers.SceneEntityCfg` class, and the respective :func:`isaaclab.utils.string.resolve_matching_names_values` and :func:`isaaclab.utils.string.resolve_matching_names` functions. 0.15.6 (2024-03-28) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Extended the :class:`isaaclab.app.AppLauncher` class to support the loading of experience files from the command line. This allows users to load a specific experience file when running the application (such as for multi-camera rendering or headless mode). Changed ^^^^^^^ * Changed default loading of experience files in the :class:`isaaclab.app.AppLauncher` class from the ones provided by Isaac Sim to the ones provided in Isaac Lab's ``apps`` directory. 0.15.5 (2024-03-23) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the env origins in :meth:`_compute_env_origins_grid` of :class:`isaaclab.terrain.TerrainImporter` to match that obtained from the Isaac Sim :class:`isaacsim.core.cloner.GridCloner` class. Added ^^^^^ * Added unit test to ensure consistency between environment origins generated by IsaacSim's Grid Cloner and those produced by the TerrainImporter. 0.15.4 (2024-03-22) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the :class:`isaaclab.envs.mdp.actions.NonHolonomicActionCfg` class to use the correct variable when applying actions. 0.15.3 (2024-03-21) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added unit test to check that :class:`isaaclab.scene.InteractiveScene` entity data is not shared between separate instances. Fixed ^^^^^ * Moved class variables in :class:`isaaclab.scene.InteractiveScene` to correctly be assigned as instance variables. * Removed custom ``__del__`` magic method from :class:`isaaclab.scene.InteractiveScene`. 0.15.2 (2024-03-21) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added resolving of relative paths for the main asset USD file when using the :class:`isaaclab.sim.converters.UrdfConverter` class. This is to ensure that the material paths are resolved correctly when the main asset file is moved to a different location. 0.15.1 (2024-03-19) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the imitation learning workflow example script, updating Isaac Lab and Robomimic API calls. * Removed the resetting of :attr:`_term_dones` in the :meth:`isaaclab.managers.TerminationManager.reset`. Previously, the environment cleared out all the terms. However, it impaired reading the specific term's values externally. 0.15.0 (2024-03-17) ~~~~~~~~~~~~~~~~~~~ Deprecated ^^^^^^^^^^ * Renamed :class:`isaaclab.managers.RandomizationManager` to :class:`isaaclab.managers.EventManager` class for clarification as the manager takes care of events such as reset in addition to pure randomizations. * Renamed :class:`isaaclab.managers.RandomizationTermCfg` to :class:`isaaclab.managers.EventTermCfg` for consistency with the class name change. 0.14.1 (2024-03-16) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added simulation schemas for joint drive and fixed tendons. These can be configured for assets imported from file formats. * Added logging of tendon properties to the articulation class (if they are present in the USD prim). 0.14.0 (2024-03-15) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the ordering of body names used in the :class:`isaaclab.assets.Articulation` class. Earlier, the body names were not following the same ordering as the bodies in the articulation. This led to issues when using the body names to access data related to the links from the articulation view (such as Jacobians, mass matrices, etc.). Removed ^^^^^^^ * Removed the attribute :attr:`body_physx_view` from the :class:`isaaclab.assets.RigidObject` and :class:`isaaclab.assets.Articulation` classes. These were causing confusions when used with articulation view since the body names were not following the same ordering. 0.13.1 (2024-03-14) ~~~~~~~~~~~~~~~~~~~ Removed ^^^^^^^ * Removed the :mod:`isaaclab.compat` module. This module was used to provide compatibility with older versions of Isaac Sim. It is no longer needed since we have most of the functionality absorbed into the main classes. 0.13.0 (2024-03-12) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for the following data types inside the :class:`isaaclab.sensors.Camera` class: ``instance_segmentation_fast`` and ``instance_id_segmentation_fast``. These are GPU-supported annotations and are faster than the regular annotations. Fixed ^^^^^ * Fixed handling of semantic filtering inside the :class:`isaaclab.sensors.Camera` class. Earlier, the annotator was given ``semanticTypes`` as an argument. However, with Isaac Sim 2023.1, the annotator does not accept this argument. Instead the mapping needs to be set to the synthetic data interface directly. * Fixed the return shape of colored images for segmentation data types inside the :class:`isaaclab.sensors.Camera` class. Earlier, the images were always returned as ``int32``. Now, they are casted to ``uint8`` 4-channel array before returning if colorization is enabled for the annotation type. Removed ^^^^^^^ * Dropped support for ``instance_segmentation`` and ``instance_id_segmentation`` annotations in the :class:`isaaclab.sensors.Camera` class. Their "fast" counterparts should be used instead. * Renamed the argument :attr:`isaaclab.sensors.CameraCfg.semantic_types` to :attr:`isaaclab.sensors.CameraCfg.semantic_filter`. This is more aligned with Replicator's terminology for semantic filter predicates. * Replaced the argument :attr:`isaaclab.sensors.CameraCfg.colorize` with separate colorized arguments for each annotation type (:attr:`~isaaclab.sensors.CameraCfg.colorize_instance_segmentation`, :attr:`~isaaclab.sensors.CameraCfg.colorize_instance_id_segmentation`, and :attr:`~isaaclab.sensors.CameraCfg.colorize_semantic_segmentation`). 0.12.4 (2024-03-11) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Adapted randomization terms to deal with ``slice`` for the body indices. Earlier, the terms were not able to handle the slice object and were throwing an error. * Added ``slice`` type-hinting to all body and joint related methods in the rigid body and articulation classes. This is to make it clear that the methods can handle both list of indices and slices. 0.12.3 (2024-03-11) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added signal handler to the :class:`isaaclab.app.AppLauncher` class to catch the ``SIGINT`` signal and close the application gracefully. This is to prevent the application from crashing when the user presses ``Ctrl+C`` to close the application. 0.12.2 (2024-03-10) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added observation terms for states of a rigid object in world frame. * Added randomization terms to set root state with randomized orientation and joint state within user-specified limits. * Added reward term for penalizing specific termination terms. Fixed ^^^^^ * Improved sampling of states inside randomization terms. Earlier, the code did multiple torch calls for sampling different components of the vector. Now, it uses a single call to sample the entire vector. 0.12.1 (2024-03-09) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added an option to the last actions observation term to get a specific term by name from the action manager. If None, the behavior remains the same as before (the entire action is returned). 0.12.0 (2024-03-08) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added functionality to sample flat patches on a generated terrain. This can be configured using :attr:`isaaclab.terrains.SubTerrainBaseCfg.flat_patch_sampling` attribute. * Added a randomization function for setting terrain-aware root state. Through this, an asset can be reset to a randomly sampled flat patches. Fixed ^^^^^ * Separated normal and terrain-base position commands. The terrain based commands rely on the terrain to sample flat patches for setting the target position. * Fixed command resample termination function. Changed ^^^^^^^ * Added the attribute :attr:`isaaclab.envs.mdp.commands.UniformVelocityCommandCfg.heading_control_stiffness` to control the stiffness of the heading control term in the velocity command term. Earlier, this was hard-coded to 0.5 inside the term. Removed ^^^^^^^ * Removed the function :meth:`sample_new_targets` in the terrain importer. Instead the attribute :attr:`isaaclab.terrains.TerrainImporter.flat_patches` should be used to sample new targets. 0.11.3 (2024-03-04) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Corrects the functions :func:`isaaclab.utils.math.axis_angle_from_quat` and :func:`isaaclab.utils.math.quat_error_magnitude` to accept tensors of the form (..., 4) instead of (N, 4). This brings us in line with our documentation and also upgrades one of our functions to handle higher dimensions. 0.11.2 (2024-03-04) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added checks for default joint position and joint velocity in the articulation class. This is to prevent users from configuring values for these quantities that might be outside the valid range from the simulation. 0.11.1 (2024-02-29) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Replaced the default values for ``joint_ids`` and ``body_ids`` from ``None`` to ``slice(None)`` in the :class:`isaaclab.managers.SceneEntityCfg`. * Adapted rewards and observations terms so that the users can query a subset of joints and bodies. 0.11.0 (2024-02-27) ~~~~~~~~~~~~~~~~~~~ Removed ^^^^^^^ * Dropped support for Isaac Sim<=2022.2. As part of this, removed the components of :class:`isaaclab.app.AppLauncher` which handled ROS extension loading. We no longer need them in Isaac Sim>=2023.1 to control the load order to avoid crashes. * Upgraded Dockerfile to use ISAACSIM_VERSION=2023.1.1 by default. 0.10.28 (2024-02-29) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Implemented relative and moving average joint position action terms. These allow the user to specify the target joint positions as relative to the current joint positions or as a moving average of the joint positions over a window of time. 0.10.27 (2024-02-28) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added UI feature to start and stop animation recording in the stage when running an environment. To enable this feature, please pass the argument ``--disable_fabric`` to the environment script to allow USD read/write operations. Be aware that this will slow down the simulation. 0.10.26 (2024-02-26) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a viewport camera controller class to the :class:`isaaclab.envs.BaseEnv`. This is useful for applications where the user wants to render the viewport from different perspectives even when the simulation is running in headless mode. 0.10.25 (2024-02-26) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Ensures that all path arguments in :mod:`isaaclab.sim.utils` are cast to ``str``. Previously, we had handled path types as strings without casting. 0.10.24 (2024-02-26) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added tracking of contact time in the :class:`isaaclab.sensors.ContactSensor` class. Previously, only the air time was being tracked. * Added contact force threshold, :attr:`isaaclab.sensors.ContactSensorCfg.force_threshold`, to detect when the contact sensor is in contact. Previously, this was set to hard-coded 1.0 in the sensor class. 0.10.23 (2024-02-21) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixes the order of size arguments in :meth:`isaaclab.terrains.height_field.random_uniform_terrain`. Previously, the function would crash if the size along x and y were not the same. 0.10.22 (2024-02-14) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed "divide by zero" bug in :class:`~isaaclab.sim.SimulationContext` when setting gravity vector. Now, it is correctly disabled when the gravity vector is set to zero. 0.10.21 (2024-02-12) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the printing of articulation joint information when the articulation has only one joint. Earlier, the function was performing a squeeze operation on the tensor, which caused an error when trying to index the tensor of shape (1,). 0.10.20 (2024-02-12) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Adds :attr:`isaaclab.sim.PhysxCfg.enable_enhanced_determinism` to enable improved determinism from PhysX. Please note this comes at the expense of performance. 0.10.19 (2024-02-08) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed environment closing so that articulations, objects, and sensors are cleared properly. 0.10.18 (2024-02-05) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Pinned :mod:`torch` version to 2.0.1 in the setup.py to keep parity version of :mod:`torch` supplied by Isaac 2023.1.1, and prevent version incompatibility between :mod:`torch` ==2.2 and :mod:`typing-extensions` ==3.7.4.3 0.10.17 (2024-02-02) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^^ * Fixed carb setting ``/app/livestream/enabled`` to be set as False unless live-streaming is specified by :class:`isaaclab.app.AppLauncher` settings. This fixes the logic of :meth:`SimulationContext.render`, which depended on the config in previous versions of Isaac defaulting to false for this setting. 0.10.16 (2024-01-29) ~~~~~~~~~~~~~~~~~~~~ Added ^^^^^^ * Added an offset parameter to the height scan observation term. This allows the user to specify the height offset of the scan from the tracked body. Previously it was hard-coded to be 0.5. 0.10.15 (2024-01-29) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed joint torque computation for implicit actuators. Earlier, the torque was always zero for implicit actuators. Now, it is computed approximately by applying the PD law. 0.10.14 (2024-01-22) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the tensor shape of :attr:`isaaclab.sensors.ContactSensorData.force_matrix_w`. Earlier, the reshaping led to a mismatch with the data obtained from PhysX. 0.10.13 (2024-01-15) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed running of environments with a single instance even if the :attr:`replicate_physics`` flag is set to True. 0.10.12 (2024-01-10) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed indexing of source and target frames in the :class:`isaaclab.sensors.FrameTransformer` class. Earlier, it always assumed that the source frame body is at index 0. Now, it uses the body index of the source frame to compute the transformation. Deprecated ^^^^^^^^^^ * Renamed quantities in the :class:`isaaclab.sensors.FrameTransformerData` class to be more consistent with the terminology used in the asset classes. The following quantities are deprecated: * ``target_rot_w`` -> ``target_quat_w`` * ``source_rot_w`` -> ``source_quat_w`` * ``target_rot_source`` -> ``target_quat_source`` 0.10.11 (2024-01-08) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed attribute error raised when calling the :class:`isaaclab.envs.mdp.TerrainBasedPositionCommand` command term. * Added a dummy function in :class:`isaaclab.terrain.TerrainImporter` that returns environment origins as terrain-aware sampled targets. This function should be implemented by child classes based on the terrain type. 0.10.10 (2023-12-21) ~~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed reliance on non-existent ``Viewport`` in :class:`isaaclab.sim.SimulationContext` when loading livestreaming by ensuring that the extension ``omni.kit.viewport.window`` is enabled in :class:`isaaclab.app.AppLauncher` when livestreaming is enabled 0.10.9 (2023-12-21) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed invalidation of physics views inside the asset and sensor classes. Earlier, they were left initialized even when the simulation was stopped. This caused issues when closing the application. 0.10.8 (2023-12-20) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the :class:`isaaclab.envs.mdp.actions.DifferentialInverseKinematicsAction` class to account for the offset pose of the end-effector. 0.10.7 (2023-12-19) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added a check to ray-cast and camera sensor classes to ensure that the sensor prim path does not have a regex expression at its leaf. For instance, ``/World/Robot/camera_.*`` is not supported for these sensor types. This behavior needs to be fixed in the future. 0.10.6 (2023-12-19) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for using articulations as visualization markers. This disables all physics APIs from the articulation and allows the user to use it as a visualization marker. It is useful for creating visualization markers for the end-effectors or base of the robot. Fixed ^^^^^ * Fixed hiding of debug markers from secondary images when using the :class:`isaaclab.markers.VisualizationMarkers` class. Earlier, the properties were applied on the XForm prim instead of the Mesh prim. 0.10.5 (2023-12-18) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed test ``check_base_env_anymal_locomotion.py``, which previously called :func:`torch.jit.load` with the path to a policy (which would work for a local file), rather than calling :func:`isaaclab.utils.assets.read_file` on the path to get the file itself. 0.10.4 (2023-12-14) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed potentially breaking import of omni.kit.widget.toolbar by ensuring that if live-stream is enabled, then the :mod:`omni.kit.widget.toolbar` extension is loaded. 0.10.3 (2023-12-12) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the attribute :attr:`isaaclab.actuators.ActuatorNetMLPCfg.input_order` to specify the order of the input tensors to the MLP network. Fixed ^^^^^ * Fixed computation of metrics for the velocity command term. Earlier, the norm was being computed over the entire batch instead of the last dimension. * Fixed the clipping inside the :class:`isaaclab.actuators.DCMotor` class. Earlier, it was not able to handle the case when configured saturation limit was set to None. 0.10.2 (2023-12-12) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added a check in the simulation stop callback in the :class:`isaaclab.sim.SimulationContext` class to not render when an exception is raised. The while loop in the callback was preventing the application from closing when an exception was raised. 0.10.1 (2023-12-06) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added command manager class with terms defined by :class:`isaaclab.managers.CommandTerm`. This allow for multiple types of command generators to be used in the same environment. 0.10.0 (2023-12-04) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Modified the sensor and asset base classes to use the underlying PhysX views instead of Isaac Sim views. Using Isaac Sim classes led to a very high load time (of the order of minutes) when using a scene with many assets. This is because Isaac Sim supports USD paths which are slow and not required. Added ^^^^^ * Added faster implementation of USD stage traversal methods inside the :class:`isaaclab.sim.utils` module. * Added properties :attr:`isaaclab.assets.AssetBase.num_instances` and :attr:`isaaclab.sensor.SensorBase.num_instances` to obtain the number of instances of the asset or sensor in the simulation respectively. Removed ^^^^^^^ * Removed dependencies on Isaac Sim view classes. It is no longer possible to use :attr:`root_view` and :attr:`body_view`. Instead use :attr:`root_physx_view` and :attr:`body_physx_view` to access the underlying PhysX views. 0.9.55 (2023-12-03) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the Nucleus directory path in the :attr:`isaaclab.utils.assets.NVIDIA_NUCLEUS_DIR`. Earlier, it was referring to the ``NVIDIA/Assets`` directory instead of ``NVIDIA``. 0.9.54 (2023-11-29) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed pose computation in the :class:`isaaclab.sensors.Camera` class to obtain them from XFormPrimView instead of using ``UsdGeomCamera.ComputeLocalToWorldTransform`` method. The latter is not updated correctly during GPU simulation. * Fixed initialization of the annotator info in the class :class:`isaaclab.sensors.Camera`. Previously all dicts had the same memory address which caused all annotators to have the same info. * Fixed the conversion of ``uint32`` warp arrays inside the :meth:`isaaclab.utils.array.convert_to_torch` method. PyTorch does not support this type, so it is converted to ``int32`` before converting to PyTorch tensor. * Added render call inside :meth:`isaaclab.sim.SimulationContext.reset` to initialize Replicator buffers when the simulation is reset. 0.9.53 (2023-11-29) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed the behavior of passing :obj:`None` to the :class:`isaaclab.actuators.ActuatorBaseCfg` class. Earlier, they were resolved to fixed default values. Now, they imply that the values are loaded from the USD joint drive configuration. Added ^^^^^ * Added setting of joint armature and friction quantities to the articulation class. 0.9.52 (2023-11-29) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed the warning print in :meth:`isaaclab.sim.utils.apply_nested` method to be more descriptive. Earlier, it was printing a warning for every instanced prim. Now, it only prints a warning if it could not apply the attribute to any of the prims. Added ^^^^^ * Added the method :meth:`isaaclab.utils.assets.retrieve_file_path` to obtain the absolute path of a file on the Nucleus server or locally. Fixed ^^^^^ * Fixed hiding of STOP button in the :class:`AppLauncher` class when running the simulation in headless mode. * Fixed a bug with :meth:`isaaclab.sim.utils.clone` failing when the input prim path had no parent (example: "/Table"). 0.9.51 (2023-11-29) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed the :meth:`isaaclab.sensor.SensorBase.update` method to always recompute the buffers if the sensor is in visualization mode. Added ^^^^^ * Added available entities to the error message when accessing a non-existent entity in the :class:`InteractiveScene` class. * Added a warning message when the user tries to reference an invalid prim in the :class:`FrameTransformer` sensor. 0.9.50 (2023-11-28) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Hid the ``STOP`` button in the UI when running standalone Python scripts. This is to prevent users from accidentally clicking the button and stopping the simulation. They should only be able to play and pause the simulation from the UI. Removed ^^^^^^^ * Removed :attr:`isaaclab.sim.SimulationCfg.shutdown_app_on_stop`. The simulation is always rendering if it is stopped from the UI. The user needs to close the window or press ``Ctrl+C`` to close the simulation. 0.9.49 (2023-11-27) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added an interface class, :class:`isaaclab.managers.ManagerTermBase`, to serve as the parent class for term implementations that are functional classes. * Adapted all managers to support terms that are classes and not just functions clearer. This allows the user to create more complex terms that require additional state information. 0.9.48 (2023-11-24) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed initialization of drift in the :class:`isaaclab.sensors.RayCasterCamera` class. 0.9.47 (2023-11-24) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Automated identification of the root prim in the :class:`isaaclab.assets.RigidObject` and :class:`isaaclab.assets.Articulation` classes. Earlier, the root prim was hard-coded to the spawn prim path. Now, the class searches for the root prim under the spawn prim path. 0.9.46 (2023-11-24) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed a critical issue in the asset classes with writing states into physics handles. Earlier, the states were written over all the indices instead of the indices of the asset that were being updated. This caused the physics handles to refresh the states of all the assets in the scene, which is not desirable. 0.9.45 (2023-11-24) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`isaaclab.command_generators.UniformPoseCommandGenerator` to generate poses in the asset's root frame by uniformly sampling from a given range. 0.9.44 (2023-11-16) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added methods :meth:`reset` and :meth:`step` to the :class:`isaaclab.envs.BaseEnv`. This unifies the environment interface for simple standalone applications with the class. 0.9.43 (2023-11-16) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Replaced subscription of physics play and stop events in the :class:`isaaclab.assets.AssetBase` and :class:`isaaclab.sensors.SensorBase` classes with subscription to time-line play and stop events. This is to prevent issues in cases where physics first needs to perform mesh cooking and handles are not available immediately. For instance, with deformable meshes. 0.9.42 (2023-11-16) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed setting of damping values from the configuration for :class:`ActuatorBase` class. Earlier, the stiffness values were being set into damping when a dictionary configuration was passed to the actuator model. * Added dealing with :class:`int` and :class:`float` values in the configurations of :class:`ActuatorBase`. Earlier, a type-error was thrown when integer values were passed to the actuator model. 0.9.41 (2023-11-16) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the naming and shaping issues in the binary joint action term. 0.9.40 (2023-11-09) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Simplified the manual initialization of Isaac Sim :class:`ArticulationView` class. Earlier, we basically copied the code from the Isaac Sim source code. Now, we just call their initialize method. Changed ^^^^^^^ * Changed the name of attribute :attr:`default_root_state_w` to :attr:`default_root_state`. The latter is more correct since the data is actually in the local environment frame and not the simulation world frame. 0.9.39 (2023-11-08) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Changed the reference of private ``_body_view`` variable inside the :class:`RigidObject` class to the public ``body_view`` property. For a rigid object, the private variable is not defined. 0.9.38 (2023-11-07) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Upgraded the :class:`isaaclab.envs.RLTaskEnv` class to support Gym 0.29.0 environment definition. Added ^^^^^ * Added computation of ``time_outs`` and ``terminated`` signals inside the termination manager. These follow the definition mentioned in `Gym 0.29.0 `_. * Added proper handling of observation and action spaces in the :class:`isaaclab.envs.RLTaskEnv` class. These now follow closely to how Gym VecEnv handles the spaces. 0.9.37 (2023-11-06) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed broken visualization in :mod:`isaaclab.sensors.FrameTramsformer` class by overwriting the correct ``_debug_vis_callback`` function. * Moved the visualization marker configurations of sensors to their respective sensor configuration classes. This allows users to set these configurations from the configuration object itself. 0.9.36 (2023-11-03) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added explicit deleting of different managers in the :class:`isaaclab.envs.BaseEnv` and :class:`isaaclab.envs.RLTaskEnv` classes. This is required since deleting the managers is order-sensitive (many managers need to be deleted before the scene is deleted). 0.9.35 (2023-11-02) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the error: ``'str' object has no attribute '__module__'`` introduced by adding the future import inside the :mod:`isaaclab.utils.warp.kernels` module. Warp language does not support the ``__future__`` imports. 0.9.34 (2023-11-02) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added missing import of ``from __future__ import annotations`` in the :mod:`isaaclab.utils.warp` module. This is needed to have a consistent behavior across Python versions. 0.9.33 (2023-11-02) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the :class:`isaaclab.command_generators.NullCommandGenerator` class. Earlier, it was having a runtime error due to infinity in the resampling time range. Now, the class just overrides the parent methods to perform no operations. 0.9.32 (2023-11-02) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Renamed the :class:`isaaclab.envs.RLEnv` class to :class:`isaaclab.envs.RLTaskEnv` to avoid confusions in terminologies between environments and tasks. 0.9.31 (2023-11-02) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the :class:`isaaclab.sensors.RayCasterCamera` class, as a ray-casting based camera for "distance_to_camera", "distance_to_image_plane" and "normals" annotations. It has the same interface and functionalities as the USD Camera while it is on average 30% faster. 0.9.30 (2023-11-01) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added skipping of None values in the :class:`InteractiveScene` class when creating the scene from configuration objects. Earlier, it was throwing an error when the user passed a None value for a scene element. * Added ``kwargs`` to the :class:`RLEnv` class to allow passing additional arguments from gym registry function. This is now needed since the registry function passes args beyond the ones specified in the constructor. 0.9.29 (2023-11-01) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the material path resolution inside the :class:`isaaclab.sim.converters.UrdfConverter` class. With Isaac Sim 2023.1, the material paths from the importer are always saved as absolute paths. This caused issues when the generated USD file was moved to a different location. The fix now resolves the material paths relative to the USD file location. 0.9.28 (2023-11-01) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed the way the :func:`isaaclab.sim.spawners.from_files.spawn_ground_plane` function sets the height of the ground. Earlier, it was reading the height from the configuration object. Now, it expects the desired transformation as inputs to the function. This makes it consistent with the other spawner functions. 0.9.27 (2023-10-31) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Removed the default value of the argument ``camel_case`` in setters of USD attributes. This is to avoid confusion with the naming of the attributes in the USD file. Fixed ^^^^^ * Fixed the selection of material prim in the :class:`isaaclab.sim.spawners.materials.spawn_preview_surface` method. Earlier, the created prim was being selected in the viewport which interfered with the selection of prims by the user. * Updated :class:`isaaclab.sim.converters.MeshConverter` to use a different stage than the default stage for the conversion. This is to avoid the issue of the stage being closed when the conversion is done. 0.9.26 (2023-10-31) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the sensor implementation for :class:`isaaclab.sensors.FrameTransformer` class. Currently, it handles obtaining the transformation between two frames in the same articulation. 0.9.25 (2023-10-27) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the :mod:`isaaclab.envs.ui` module to put all the UI-related classes in one place. This currently implements the :class:`isaaclab.envs.ui.BaseEnvWindow` and :class:`isaaclab.envs.ui.RLEnvWindow` classes. Users can inherit from these classes to create their own UI windows. * Added the attribute :attr:`isaaclab.envs.BaseEnvCfg.ui_window_class_type` to specify the UI window class to be used for the environment. This allows the user to specify their own UI window class to be used for the environment. 0.9.24 (2023-10-27) ~~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed the behavior of setting up debug visualization for assets, sensors and command generators. Earlier it was raising an error if debug visualization was not enabled in the configuration object. Now it checks whether debug visualization is implemented and only sets up the callback if it is implemented. 0.9.23 (2023-10-27) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed a typo in the :class:`AssetBase` and :class:`SensorBase` that effected the class destructor. Earlier, a tuple was being created in the constructor instead of the actual object. 0.9.22 (2023-10-26) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a :class:`isaaclab.command_generators.NullCommandGenerator` class for no command environments. This is easier to work with than having checks for :obj:`None` in the command generator. Fixed ^^^^^ * Moved the randomization manager to the :class:`isaaclab.envs.BaseEnv` class with the default settings to reset the scene to the defaults specified in the configurations of assets. * Moved command generator to the :class:`isaaclab.envs.RlEnv` class to have all task-specification related classes in the same place. 0.9.21 (2023-10-26) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Decreased the priority of callbacks in asset and sensor base classes. This may help in preventing crashes when warm starting the simulation. * Fixed no rendering mode when running the environment from the GUI. Earlier the function :meth:`SimulationContext.set_render_mode` was erroring out. 0.9.20 (2023-10-25) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Changed naming in :class:`isaaclab.sim.SimulationContext.RenderMode` to use ``NO_GUI_OR_RENDERING`` and ``NO_RENDERING`` instead of ``HEADLESS`` for clarity. * Changed :class:`isaaclab.sim.SimulationContext` to be capable of handling livestreaming and offscreen rendering. * Changed :class:`isaaclab.app.AppLauncher` envvar ``VIEWPORT_RECORD`` to the more descriptive ``OFFSCREEN_RENDER``. 0.9.19 (2023-10-25) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added Gym observation and action spaces for the :class:`isaaclab.envs.RLEnv` class. 0.9.18 (2023-10-23) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Created :class:`isaaclab.sim.converters.asset_converter.AssetConverter` to serve as a base class for all asset converters. * Added :class:`isaaclab.sim.converters.mesh_converter.MeshConverter` to handle loading and conversion of mesh files (OBJ, STL and FBX) into USD format. * Added script ``convert_mesh.py`` to ``source/tools`` to allow users to convert a mesh to USD via command line arguments. Changed ^^^^^^^ * Renamed the submodule :mod:`isaaclab.sim.loaders` to :mod:`isaaclab.sim.converters` to be more general with the functionality of the module. * Updated ``check_instanceable.py`` script to convert relative paths to absolute paths. 0.9.17 (2023-10-22) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added setters and getters for term configurations in the :class:`RandomizationManager`, :class:`RewardManager` and :class:`TerminationManager` classes. This allows the user to modify the term configurations after the manager has been created. * Added the method :meth:`compute_group` to the :class:`isaaclab.managers.ObservationManager` class to compute the observations for only a given group. * Added the curriculum term for modifying reward weights after certain environment steps. 0.9.16 (2023-10-22) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for keyword arguments for terms in the :class:`isaaclab.managers.ManagerBase`. Fixed ^^^^^ * Fixed resetting of buffers in the :class:`TerminationManager` class. Earlier, the values were being set to ``0.0`` instead of ``False``. 0.9.15 (2023-10-22) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added base yaw heading and body acceleration into :class:`isaaclab.assets.RigidObjectData` class. These quantities are computed inside the :class:`RigidObject` class. Fixed ^^^^^ * Fixed the :meth:`isaaclab.assets.RigidObject.set_external_force_and_torque` method to correctly deal with the body indices. * Fixed a bug in the :meth:`isaaclab.utils.math.wrap_to_pi` method to prevent self-assignment of the input tensor. 0.9.14 (2023-10-21) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added 2-D drift (i.e. along x and y) to the :class:`isaaclab.sensors.RayCaster` class. * Added flags to the :class:`isaaclab.sensors.ContactSensorCfg` to optionally obtain the sensor origin and air time information. Since these are not required by default, they are disabled by default. Fixed ^^^^^ * Fixed the handling of contact sensor history buffer in the :class:`isaaclab.sensors.ContactSensor` class. Earlier, the buffer was not being updated correctly. 0.9.13 (2023-10-20) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the issue with double :obj:`Ellipsis` when indexing tensors with multiple dimensions. The fix now uses :obj:`slice(None)` instead of :obj:`Ellipsis` to index the tensors. 0.9.12 (2023-10-18) ~~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed bugs in actuator model implementation for actuator nets. Earlier the DC motor clipping was not working. * Fixed bug in applying actuator model in the :class:`isaaclab.asset.Articulation` class. The new implementation caches the outputs from explicit actuator model into the ``joint_pos_*_sim`` buffer to avoid feedback loops in the tensor operation. 0.9.11 (2023-10-17) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the support for semantic tags into the :class:`isaaclab.sim.spawner.SpawnerCfg` class. This allows the user to specify the semantic tags for a prim when spawning it into the scene. It follows the same format as Omniverse Replicator. 0.9.10 (2023-10-16) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added ``--livestream`` and ``--ros`` CLI args to :class:`isaaclab.app.AppLauncher` class. * Added a static function :meth:`isaaclab.app.AppLauncher.add_app_launcher_args`, which appends the arguments needed for :class:`isaaclab.app.AppLauncher` to the argument parser. Changed ^^^^^^^ * Within :class:`isaaclab.app.AppLauncher`, removed ``REMOTE_DEPLOYMENT`` env-var processing in the favor of ``HEADLESS`` and ``LIVESTREAM`` env-vars. These have clearer uses and better parity with the CLI args. 0.9.9 (2023-10-12) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the property :attr:`isaaclab.assets.Articulation.is_fixed_base` to the articulation class to check if the base of the articulation is fixed or floating. * Added the task-space action term corresponding to the differential inverse-kinematics controller. Fixed ^^^^^ * Simplified the :class:`isaaclab.controllers.DifferentialIKController` to assume that user provides the correct end-effector poses and Jacobians. Earlier it was doing internal frame transformations which made the code more complicated and error-prone. 0.9.8 (2023-09-30) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the boundedness of class objects that register callbacks into the simulator. These include devices, :class:`AssetBase`, :class:`SensorBase` and :class:`CommandGenerator`. The fix ensures that object gets deleted when the user deletes the object. 0.9.7 (2023-09-26) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Modified the :class:`isaaclab.markers.VisualizationMarkers` to use the :class:`isaaclab.sim.spawner.SpawnerCfg` class instead of their own configuration objects. This makes it consistent with the other ways to spawn assets in the scene. Added ^^^^^ * Added the method :meth:`copy` to configclass to allow copying of configuration objects. 0.9.6 (2023-09-26) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Changed class-level configuration classes to refer to class types using ``class_type`` attribute instead of ``cls`` or ``cls_name``. 0.9.5 (2023-09-25) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Added future import of ``annotations`` to have a consistent behavior across Python versions. * Removed the type-hinting from docstrings to simplify maintenance of the documentation. All type-hints are now in the code itself. 0.9.4 (2023-08-29) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :class:`isaaclab.scene.InteractiveScene`, as the central scene unit that contains all entities that are part of the simulation. These include the terrain, sensors, articulations, rigid objects etc. The scene groups the common operations of these entities and allows to access them via their unique names. * Added :mod:`isaaclab.envs` module that contains environment definitions that encapsulate the different general (scene, action manager, observation manager) and RL-specific (reward and termination manager) managers. * Added :class:`isaaclab.managers.SceneEntityCfg` to handle which scene elements are required by the manager's terms. This allows the manager to parse useful information from the scene elements, such as the joint and body indices, and pass them to the term. * Added :class:`isaaclab.sim.SimulationContext.RenderMode` to handle different rendering modes based on what the user wants to update (viewport, cameras, or UI elements). Fixed ^^^^^ * Fixed the :class:`isaaclab.command_generators.CommandGeneratorBase` to register a debug visualization callback similar to how sensors and robots handle visualization. 0.9.3 (2023-08-23) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Enabled the `faulthander `_ to catch segfaults and print the stack trace. This is enabled by default in the :class:`isaaclab.app.AppLauncher` class. Fixed ^^^^^ * Re-added the :mod:`isaaclab.utils.kit` to the ``compat`` directory and fixed all the references to it. * Fixed the deletion of Replicator nodes for the :class:`isaaclab.sensors.Camera` class. Earlier, the Replicator nodes were not being deleted when the camera was deleted. However, this does not prevent the random crashes that happen when the camera is deleted. * Fixed the :meth:`isaaclab.utils.math.convert_quat` to support both numpy and torch tensors. Changed ^^^^^^^ * Renamed all the scripts inside the ``test`` directory to follow the convention: * ``test_.py``: Tests for the module ```` using unittest. * ``check_``: Check for the module ```` using python main function. 0.9.2 (2023-08-22) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the ability to color meshes in the :class:`isaaclab.terrain.TerrainGenerator` class. Currently, it only supports coloring the mesh randomly (``"random"``), based on the terrain height (``"height"``), and no coloring (``"none"``). Fixed ^^^^^ * Modified the :class:`isaaclab.terrain.TerrainImporter` class to configure visual and physics materials based on the configuration object. 0.9.1 (2023-08-18) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Introduced three different rotation conventions in the :class:`isaaclab.sensors.Camera` class. These conventions are: * ``opengl``: the camera is looking down the -Z axis with the +Y axis pointing up * ``ros``: the camera is looking down the +Z axis with the +Y axis pointing down * ``world``: the camera is looking along the +X axis with the -Z axis pointing down These can be used to declare the camera offset in :class:`isaaclab.sensors.CameraCfg.OffsetCfg` class and in :meth:`isaaclab.sensors.Camera.set_world_pose` method. Additionally, all conventions are saved to :class:`isaaclab.sensors.CameraData` class for easy access. Changed ^^^^^^^ * Adapted all the sensor classes to follow a structure similar to the :class:`isaaclab.assets.AssetBase`. Hence, the spawning and initialization of sensors manually by the users is avoided. * Removed the :meth:`debug_vis` function since that this functionality is handled by a render callback automatically (based on the passed configuration for the :class:`isaaclab.sensors.SensorBaseCfg.debug_vis` flag). 0.9.0 (2023-08-18) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Introduces a new set of asset interfaces. These interfaces simplify the spawning of assets into the scene and initializing the physics handle by putting that inside post-startup physics callbacks. With this, users no longer need to worry about the :meth:`spawn` and :meth:`initialize` calls. * Added utility methods to :mod:`isaaclab.utils.string` module that resolve regex expressions based on passed list of target keys. Changed ^^^^^^^ * Renamed all references of joints in an articulation from "dof" to "joint". This makes it consistent with the terminology used in robotics. Deprecated ^^^^^^^^^^ * Removed the previous modules for objects and robots. Instead the :class:`Articulation` and :class:`RigidObject` should be used. 0.8.12 (2023-08-18) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added other properties provided by ``PhysicsScene`` to the :class:`isaaclab.sim.SimulationContext` class to allow setting CCD, solver iterations, etc. * Added commonly used functions to the :class:`SimulationContext` class itself to avoid having additional imports from Isaac Sim when doing simple tasks such as setting camera view or retrieving the simulation settings. Fixed ^^^^^ * Switched the notations of default buffer values in :class:`isaaclab.sim.PhysxCfg` from multiplication to scientific notation to avoid confusion with the values. 0.8.11 (2023-08-18) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Adds utility functions and configuration objects in the :mod:`isaaclab.sim.spawners` to create the following prims in the scene: * :mod:`isaaclab.sim.spawners.from_file`: Create a prim from a USD/URDF file. * :mod:`isaaclab.sim.spawners.shapes`: Create USDGeom prims for shapes (box, sphere, cylinder, capsule, etc.). * :mod:`isaaclab.sim.spawners.materials`: Create a visual or physics material prim. * :mod:`isaaclab.sim.spawners.lights`: Create a USDLux prim for different types of lights. * :mod:`isaaclab.sim.spawners.sensors`: Create a USD prim for supported sensors. Changed ^^^^^^^ * Modified the :class:`SimulationContext` class to take the default physics material using the material spawn configuration object. 0.8.10 (2023-08-17) ~~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added methods for defining different physics-based schemas in the :mod:`isaaclab.sim.schemas` module. These methods allow creating the schema if it doesn't exist at the specified prim path and modify its properties based on the configuration object. 0.8.9 (2023-08-09) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Moved the :class:`isaaclab.asset_loader.UrdfLoader` class to the :mod:`isaaclab.sim.loaders` module to make it more accessible to the user. 0.8.8 (2023-08-09) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added configuration classes and functions for setting different physics-based schemas in the :mod:`isaaclab.sim.schemas` module. These allow modifying properties of the physics solver on the asset using configuration objects. 0.8.7 (2023-08-03) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added support for `__post_init__ `_ in the :class:`isaaclab.utils.configclass` decorator. 0.8.6 (2023-08-03) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for callable classes in the :class:`isaaclab.managers.ManagerBase`. 0.8.5 (2023-08-03) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the :class:`isaaclab.markers.Visualizationmarkers` class so that the markers are not visible in camera rendering mode. Changed ^^^^^^^ * Simplified the creation of the point instancer in the :class:`isaaclab.markers.Visualizationmarkers` class. It now creates a new prim at the next available prim path if a prim already exists at the given path. 0.8.4 (2023-08-02) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the :class:`isaaclab.sim.SimulationContext` class to the :mod:`isaaclab.sim` module. This class inherits from the :class:`isaacsim.core.api.simulation_context.SimulationContext` class and adds the ability to create a simulation context from a configuration object. 0.8.3 (2023-08-02) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Moved the :class:`ActuatorBase` class to the :mod:`isaaclab.actuators.actuator_base` module. * Renamed the :mod:`isaaclab.actuators.actuator` module to :mod:`isaaclab.actuators.actuator_pd` to make it more explicit that it contains the PD actuator models. 0.8.2 (2023-08-02) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Cleaned up the :class:`isaaclab.terrain.TerrainImporter` class to take all the parameters from the configuration object. This makes it consistent with the other classes in the package. * Moved the configuration classes for terrain generator and terrain importer into separate files to resolve circular dependency issues. 0.8.1 (2023-08-02) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added a hack into :class:`isaaclab.app.AppLauncher` class to remove Isaac Lab packages from the path before launching the simulation application. This prevents the warning messages that appears when the user launches the ``SimulationApp``. Added ^^^^^ * Enabled necessary viewport extensions in the :class:`isaaclab.app.AppLauncher` class itself if ``VIEWPORT_ENABLED`` flag is true. 0.8.0 (2023-07-26) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the :class:`ActionManager` class to the :mod:`isaaclab.managers` module to handle actions in the environment through action terms. * Added contact force history to the :class:`isaaclab.sensors.ContactSensor` class. The history is stored in the ``net_forces_w_history`` attribute of the sensor data. Changed ^^^^^^^ * Implemented lazy update of buffers in the :class:`isaaclab.sensors.SensorBase` class. This allows the user to update the sensor data only when required, i.e. when the data is requested by the user. This helps avoid double computation of sensor data when a reset is called in the environment. Deprecated ^^^^^^^^^^ * Removed the support for different backends in the sensor class. We only use Pytorch as the backend now. * Removed the concept of actuator groups. They are now handled by the :class:`isaaclab.managers.ActionManager` class. The actuator models are now directly handled by the robot class itself. 0.7.4 (2023-07-26) ~~~~~~~~~~~~~~~~~~ Changed ^^^^^^^ * Changed the behavior of the :class:`isaaclab.terrains.TerrainImporter` class. It now expects the terrain type to be specified in the configuration object. This allows the user to specify everything in the configuration object and not have to do an explicit call to import a terrain. Fixed ^^^^^ * Fixed setting of quaternion orientations inside the :class:`isaaclab.markers.Visualizationmarkers` class. Earlier, the orientation was being set into the point instancer in the wrong order (``wxyz`` instead of ``xyzw``). 0.7.3 (2023-07-25) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the issue with multiple inheritance in the :class:`isaaclab.utils.configclass` decorator. Earlier, if the inheritance tree was more than one level deep and the lowest level configuration class was not updating its values from the middle level classes. 0.7.2 (2023-07-24) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the method :meth:`replace` to the :class:`isaaclab.utils.configclass` decorator to allow creating a new configuration object with values replaced from keyword arguments. This function internally calls the `dataclasses.replace `_. Fixed ^^^^^ * Fixed the handling of class types as member values in the :meth:`isaaclab.utils.configclass`. Earlier it was throwing an error since class types were skipped in the if-else block. 0.7.1 (2023-07-22) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the :class:`TerminationManager`, :class:`CurriculumManager`, and :class:`RandomizationManager` classes to the :mod:`isaaclab.managers` module to handle termination, curriculum, and randomization respectively. 0.7.0 (2023-07-22) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Created a new :mod:`isaaclab.managers` module for all the managers related to the environment / scene. This includes the :class:`isaaclab.managers.ObservationManager` and :class:`isaaclab.managers.RewardManager` classes that were previously in the :mod:`isaaclab.utils.mdp` module. * Added the :class:`isaaclab.managers.ManagerBase` class to handle the creation of managers. * Added configuration classes for :class:`ObservationTermCfg` and :class:`RewardTermCfg` to allow easy creation of observation and reward terms. Changed ^^^^^^^ * Changed the behavior of :class:`ObservationManager` and :class:`RewardManager` classes to accept the key ``func`` in each configuration term to be a callable. This removes the need to inherit from the base class and allows more reusability of the functions across different environments. * Moved the old managers to the :mod:`isaaclab.compat.utils.mdp` module. * Modified the necessary scripts to use the :mod:`isaaclab.compat.utils.mdp` module. 0.6.2 (2023-07-21) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the :mod:`isaaclab.command_generators` to generate different commands based on the desired task. It allows the user to generate commands for different tasks in the same environment without having to write custom code for each task. 0.6.1 (2023-07-16) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the :meth:`isaaclab.utils.math.quat_apply_yaw` to compute the yaw quaternion correctly. Added ^^^^^ * Added functions to convert string and callable objects in :mod:`isaaclab.utils.string`. 0.6.0 (2023-07-16) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the argument :attr:`sort_keys` to the :meth:`isaaclab.utils.io.yaml.dump_yaml` method to allow enabling/disabling of sorting of keys in the output yaml file. Fixed ^^^^^ * Fixed the ordering of terms in :mod:`isaaclab.utils.configclass` to be consistent in the order in which they are defined. Previously, the ordering was done alphabetically which made it inconsistent with the order in which the parameters were defined. Changed ^^^^^^^ * Changed the default value of the argument :attr:`sort_keys` in the :meth:`isaaclab.utils.io.yaml.dump_yaml` method to ``False``. * Moved the old config classes in :mod:`isaaclab.utils.configclass` to :mod:`isaaclab.compat.utils.configclass` so that users can still run their old code where alphabetical ordering was used. 0.5.0 (2023-07-04) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a generalized :class:`isaaclab.sensors.SensorBase` class that leverages the ideas of views to handle multiple sensors in a single class. * Added the classes :class:`isaaclab.sensors.RayCaster`, :class:`isaaclab.sensors.ContactSensor`, and :class:`isaaclab.sensors.Camera` that output a batched tensor of sensor data. Changed ^^^^^^^ * Renamed the parameter ``sensor_tick`` to ``update_freq`` to make it more intuitive. * Moved the old sensors in :mod:`isaaclab.sensors` to :mod:`isaaclab.compat.sensors`. * Modified the standalone scripts to use the :mod:`isaaclab.compat.sensors` module. 0.4.4 (2023-07-05) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the :meth:`isaaclab.terrains.trimesh.utils.make_plane` method to handle the case when the plane origin does not need to be centered. * Added the :attr:`isaaclab.terrains.TerrainGeneratorCfg.seed` to make generation of terrains reproducible. The default value is ``None`` which means that the seed is not set. Changed ^^^^^^^ * Changed the saving of ``origins`` in :class:`isaaclab.terrains.TerrainGenerator` class to be in CSV format instead of NPY format. 0.4.3 (2023-06-28) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the :class:`isaaclab.markers.PointInstancerMarker` class that wraps around `UsdGeom.PointInstancer `_ to directly work with torch and numpy arrays. Changed ^^^^^^^ * Moved the old markers in :mod:`isaaclab.markers` to :mod:`isaaclab.compat.markers`. * Modified the standalone scripts to use the :mod:`isaaclab.compat.markers` module. 0.4.2 (2023-06-28) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the sub-module :mod:`isaaclab.terrains` to allow procedural generation of terrains and supporting importing of terrains from different sources (meshes, usd files or default ground plane). 0.4.1 (2023-06-27) ~~~~~~~~~~~~~~~~~~ * Added the :class:`isaaclab.app.AppLauncher` class to allow controlled instantiation of the SimulationApp and extension loading for remote deployment and ROS bridges. Changed ^^^^^^^ * Modified all standalone scripts to use the :class:`isaaclab.app.AppLauncher` class. 0.4.0 (2023-05-27) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a helper class :class:`isaaclab.asset_loader.UrdfLoader` that converts a URDF file to instanceable USD file based on the input configuration object. 0.3.2 (2023-04-27) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added safe-printing of functions while using the :meth:`isaaclab.utils.dict.print_dict` function. 0.3.1 (2023-04-23) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added a modified version of ``lula_franka_gen.urdf`` which includes an end-effector frame. * Added a standalone script ``play_rmpflow.py`` to show RMPFlow controller. Fixed ^^^^^ * Fixed the splitting of commands in the :meth:`ActuatorGroup.compute` method. Earlier it was reshaping the commands to the shape ``(num_actuators, num_commands)`` which was causing the commands to be split incorrectly. * Fixed the processing of actuator command in the :meth:`RobotBase._process_actuators_cfg` to deal with multiple command types when using "implicit" actuator group. 0.3.0 (2023-04-20) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Added the destructor to the keyboard devices to unsubscribe from carb. Added ^^^^^ * Added the :class:`Se2Gamepad` and :class:`Se3Gamepad` for gamepad teleoperation support. 0.2.8 (2023-04-10) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed bugs in :meth:`axis_angle_from_quat` in the ``isaaclab.utils.math`` to handle quaternion with negative w component. * Fixed bugs in :meth:`subtract_frame_transforms` in the ``isaaclab.utils.math`` by adding the missing final rotation. 0.2.7 (2023-04-07) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed repetition in applying mimic multiplier for "p_abs" in the :class:`GripperActuatorGroup` class. * Fixed bugs in :meth:`reset_buffers` in the :class:`RobotBase` and :class:`LeggedRobot` classes. 0.2.6 (2023-03-16) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added the :class:`CollisionPropertiesCfg` to rigid/articulated object and robot base classes. * Added the :class:`PhysicsMaterialCfg` to the :class:`SingleArm` class for tool sites. Changed ^^^^^^^ * Changed the default control mode of the :obj:`PANDA_HAND_MIMIC_GROUP_CFG` to be from ``"v_abs"`` to ``"p_abs"``. Using velocity control for the mimic group can cause the hand to move in a jerky manner. 0.2.5 (2023-03-08) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the indices used for the Jacobian and dynamics quantities in the :class:`MobileManipulator` class. 0.2.4 (2023-03-04) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added :meth:`apply_nested_physics_material` to the ``isaaclab.utils.kit``. * Added the :meth:`sample_cylinder` to sample points from a cylinder's surface. * Added documentation about the issue in using instanceable asset as markers. Fixed ^^^^^ * Simplified the physics material application in the rigid object and legged robot classes. Removed ^^^^^^^ * Removed the ``geom_prim_rel_path`` argument in the :class:`RigidObjectCfg.MetaInfoCfg` class. 0.2.3 (2023-02-24) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the end-effector body index used for getting the Jacobian in the :class:`SingleArm` and :class:`MobileManipulator` classes. 0.2.2 (2023-01-27) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the :meth:`set_world_pose_ros` and :meth:`set_world_pose_from_view` in the :class:`Camera` class. Deprecated ^^^^^^^^^^ * Removed the :meth:`set_world_pose_from_ypr` method from the :class:`Camera` class. 0.2.1 (2023-01-26) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed the :class:`Camera` class to support different fisheye projection types. 0.2.0 (2023-01-25) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Added support for warp backend in camera utilities. * Extended the ``play_camera.py`` with ``--gpu`` flag to use GPU replicator backend. 0.1.1 (2023-01-24) ~~~~~~~~~~~~~~~~~~ Fixed ^^^^^ * Fixed setting of physics material on the ground plane when using :meth:`isaaclab.utils.kit.create_ground_plane` function. 0.1.0 (2023-01-17) ~~~~~~~~~~~~~~~~~~ Added ^^^^^ * Initial release of the extension with experimental API. * Available robot configurations: * **Quadrupeds:** Unitree A1, ANYmal B, ANYmal C * **Single-arm manipulators:** Franka Emika arm, UR5 * **Mobile manipulators:** Clearpath Ridgeback with Franka Emika arm or UR5