from biosteam import units import json import biosteam as bst from biosteam import settings import numpy as np import cond """ Import file Setup.py with all common settings for the simulation (chemicals, utilities, prices, etc.) Additional settings must be added there instead of here """ # General commments: # I tried to generalize the solvent variable, only when it is "" we need to specify the solvent # For this script, we are using dodecane #this function is used to run the process two times def run_simulation(input_data, price_solvent): #impact factors from openLCA #electricity: Electricity grid mix 1kV-60kV , consumption mix, to consumer, AC, technology mix, 1kV - 60kV impact_elec = 0.152997222 #kg CO2-eq/MJ #steam: steam production, in chemical industry impact_steam = 0.123945455 #kg CO2-eq/MJ #cooling water: tap water production, artificial recharged wells impact_water = 0.42 #kg CO2-eq/m3 input_data["Price"]["solvent"] = price_solvent chemicals = bst.Chemicals( ["Dodecane", "DMSO", bst.Chemical( "C2H4", phase="s"), "Water", "glucose", "N2", "O2", "CH4", "CO2", "C5H8O2"] ) bst.settings.set_thermo(chemicals) bst.CE = input_data['CE'] bst.PowerUtility.price = input_data["power_utility_price"] HeatUtility = bst.HeatUtility steam_utility1 = HeatUtility.get_agent("high_pressure_steam") steam_utility2 = HeatUtility.get_agent("low_pressure_steam") steam_utility3 = HeatUtility.get_agent("medium_pressure_steam") # HeatUtility.heating_agents([steam_utility1,steam_utility2]) steam_utility1.heat_transfer_efficiency = 0.85 steam_utility1.regeneration_price = 0.08064 steam_utility1.T = 529.2 steam_utility1.P = 44e5 steam_utility2.heat_transfer_efficiency = 0.85 steam_utility2.regeneration_price = 0.06768 steam_utility2.T = 428.6 steam_utility2.P = 55e4 steam_utility3.heat_transfer_efficiency = 0.85 steam_utility3.regeneration_price = 0.07974 steam_utility3.T = 480.3 steam_utility3.P = 18e5 product_stream = bst.Stream( "PROD", price=2.4023, ) # Solvent Feed tank V100 = units.MixTank( "V100", tau=input_data["tau_solv_feed_tank"], vessel_material="Carbon steel" ) # new mixer for output solvent streams of dryer M101 = units.Mixer("M101") # Feeder FE101 = units.StorageTank( "FE101", tau=input_data["tau_feeder"], vessel_material="Carbon steel" ) # process_units["FE101"] = FE101 # Dissolution vessel V101 = units.MixTank( "V101", vessel_material="Carbon steel", tau=input_data["tau_dissolution_vessel"] ) # process_units["V101"] = V101 # Heater E101 = units.HXutility( "E101", T=input_data["heating_temp_after_dissolution"]) # process_units["E101"] = E101 # Hot filtration FHOT = units.RVF("FHOT", moisture_content=0, split=input_data["splits_hot_filter"]) # process_units["FHOT"] = FHOT # Pump 1 P101 = units.Pump("P101") # process_units["P101"] = P101 # Precipitation vessel V102 = units.MixTank( "V102", vessel_material="Carbon steel", tau=input_data["tau_precipitation_vessel"], ) # process_units["V102"] = V102 # Cooler E102 = units.HXutility( "E102", T=input_data["cooling_temp_after_precipitation"]) # process_units["E102"] = E102 # Pump 2 P102 = units.Pump("P102") # process_units["P102"] = P102 # Filtration #tol_44% F101 = units.RVF("F101", moisture_content=0, split=input_data["splits_filter"]) # process_units["F101"] = F101 # Dryer H101 = units.DrumDryer( ID="H101", ins=("Mix_s6"), outs=("dry_P1", "solvent_out_1"), thermo=None, split=input_data["splits_dryer"], R=1.4, H=20, length_to_diameter=25, T=input_data["temp_dryer"], moisture_content=0, utility_agent="Natural gas", ) # process_units["H101"] = H101 # # Condenser # E103 = units.HXutility("E103", T=input_data["temp_condenser"], rigorous=True) # process_units["E103"] = E103 # # Condenser E103 = units.HXutility("E103", T=cond.Temp, rigorous=True) # process_units["E103"] = E103 # Splitter S101 = units.PhaseSplitter("S101", outs=("gas", "liquid_solvent")) # process_units["S101"] = S101 # top gas @S101.add_specification(run=True) def phases(): S101.ins[0].phases = "gl" # Pump 6 P106 = units.Pump("P106") # process_units["P106"] = P106 # Mixer M100 = units.Mixer("M100") # process_units["M100"] = M100 # Dryer H1012 = units.DrumDryer( ID="H1012", ins=("Mix_s6"), outs=("dry_P2", "solvent_out_2"), thermo=None, split=input_data["splits_dryer_EVOH"], R=1.4, H=20, length_to_diameter=25, T=input_data["temp_dryer"], moisture_content=0, utility_agent="Natural gas", ) # Mixer # we need this mixer for the outputs and then estimate the MSP with product_stream-"PROD" M1003 = units.Mixer("M1003", outs=product_stream) # process_units["M1003"] = M1003 inlet_pe = input_data["total_PE"] inlet_solvent = input_data["total_solvent"] N_runs = 10 class STRAPTEA(bst.TEA): """ Create a STRAPTEA object for techno-economic analysis. Parameters ---------- system : System Should contain feed and product streams. IRR : float Internal rate of return (fraction). duration : tuple[int, int] Start and end year of venture (e.g. (2018, 2038)). depreciation : str 'MACRS' + number of years (e.g. 'MACRS7'). operating_days : float Number of operating days per year. income_tax : float Combined federal and state income tax rate (fraction). lang_factor : float Lang factor for getting fixed capital investment from total purchase cost. If no lang factor, estimate capital investment using bare module factors. startup_schedule : tuple[float] Startup investment fractions per year (e.g. (0.5, 0.5) for 50% capital investment in the first year and 50% investment in the second). WC_over_FCI : float Working capital as a fraction of fixed capital investment. labor_cost : float Total labor cost (USD/yr). fringe_benefits : float Cost of fringe benefits as a fraction of labor cost. property_tax : float Fee as a fraction of fixed capital investment. property_insurance : float Fee as a fraction of fixed capital investment. supplies : float Yearly fee as a fraction of labor cost. maintenance : float Yearly fee as a fraction of fixed capital investment. administration : float Yearly fee as a fraction of fixed capital investment. References ---------- .. [1] Huang, H., Long, S., & Singh, V. (2016). Techno-economic analysis of biodiesel and ethanol co-production from lipid-producing sugarcane. Biofuels, Bioproducts and Biorefining, 10(3), 299–315. https://doi.org/10.1002/bbb.1640 """ __slots__ = ( "labor_cost", "fringe_benefits", "maintenance", "property_tax", "property_insurance", "_FCI_cached", "supplies", "maintanance", "administration", ) def __init__( self, system, IRR, duration, depreciation, income_tax, operating_days, lang_factor, construction_schedule, WC_over_FCI, labor_cost, fringe_benefits, property_tax, property_insurance, supplies, maintenance, administration, ): super().__init__( system, IRR, duration, depreciation, income_tax, operating_days, lang_factor, construction_schedule, startup_months=0, startup_FOCfrac=0, startup_VOCfrac=0, startup_salesfrac=0, finance_interest=0, finance_years=0, finance_fraction=0, WC_over_FCI=WC_over_FCI, ) self.labor_cost = labor_cost self.fringe_benefits = fringe_benefits self.property_tax = property_tax self.property_insurance = property_insurance self.supplies = supplies self.maintenance = maintenance self.administration = administration # This returns the ISBL def _ENG(self, installed_equipment_cost): return ( installed_equipment_cost + installed_equipment_cost * input_data["OSBL_factor"] ) * input_data["Engineering"] def _CON(self, installed_equipment_cost): return ( installed_equipment_cost + installed_equipment_cost * input_data["OSBL_factor"] ) * input_data["Contingency"] def _DPI(self, installed_equipment_cost): return ( installed_equipment_cost + installed_equipment_cost * input_data["OSBL_factor"] + ( installed_equipment_cost + installed_equipment_cost * input_data["OSBL_factor"] ) * input_data["Engineering"] + ( installed_equipment_cost + installed_equipment_cost * input_data["OSBL_factor"] ) * input_data["Contingency"] ) def _TDC(self, DPI): return DPI def _FCI(self, TDC): self._FCI_cached = TDC return TDC def _FOC(self, FCI): return FCI * ( self.property_tax + self.property_insurance + self.maintenance + self.administration ) + self.labor_cost + (self.fringe_benefits * self.labor_cost + self.supplies) # this stream include the two polymers (film) film = bst.Stream("film", C2H4=inlet_pe, units="kg/hr") solvent_flow = bst.Stream( "solvent_in", Dodecane=inlet_solvent, units="kg/hr", price=input_data["Price"]["solvent"], ) # P1 sep (film) - FE101 (solvent_flow) - V100 (FE101 - 0, V100 - 0) - V101 (V101 - 0) - E101 (E101 - 0) - FHOT (FHOT - 0) - P101 (P101 - 0) - V102 (V102 - 0) - E102 (E102 - 0) - P102 (P102 - 0) - F101 (F101 - 0) - H101 (S101 - 1, F101 - 1) - M100 (M100 - 0) - P106 # P2 SEP (FHOT - 1) - H1012 (H101 - 1, H1012 - 1) - M101 (M101 - 0) - E103 (E103 - 0) - S101 (H101 - 0, H1012 - 0) - M1003 pp_sep_sys = bst.System( "PP_Recovery_norecycle", path=( [ FE101, V100, V101, E101, FHOT, P101, V102, E102, P102, F101, H101, M101, E103, S101, H101, M100, P106, H1012, M1003, ] ), N_runs=N_runs, ) pp_sep_sys.simulate() pp_sep_sys.save_report('results_n.xlsx') bst.main_flowsheet.diagram(file='FlowDiagram', format='png', number=True) pe_recovered_mass_flow = H1012.outs[0].get_flow("kg/hr", "C2H4") evoh_recovered_mass_flow = H101.outs[0].get_flow("kg/hr", "C2H4") solvent_dissoltion_tank = V101.outs[0].get_flow("kg/hr", "Dodecane") plastic_dissolution_tank = V101.outs[0].get_flow("kg/hr", "C2H4") solvent_plastic_ratio = solvent_dissoltion_tank/(plastic_dissolution_tank) print("===============================") print("Process completed.") print("Solvent/plastic ratio at dissolution tank: ", solvent_plastic_ratio) print("Recovered pe: ", pe_recovered_mass_flow, "kg/hr") print("Recovered evoh: ", evoh_recovered_mass_flow, "kg/hr") print("===============================") strap_tea = STRAPTEA( system=pp_sep_sys, IRR=input_data["IRR"], duration=input_data["duration"], depreciation="MACRS7", income_tax=input_data["Tax_rate"], operating_days=input_data["year_operation_hours"]/24, lang_factor=input_data["Lang_factor"], construction_schedule=(0.4, 0.6), WC_over_FCI=0.10, labor_cost=input_data["Shift_operators"] * input_data["Salariy_per_operator"], fringe_benefits=input_data["Benefits_and_overhead"], property_tax=0, property_insurance=input_data["Insurance"], supplies=0, maintenance=input_data["Maintenance"], administration=0.00, ) feed = bst.main_flowsheet("PROD") msp = strap_tea.solve_price(feed) # USD/kg print("Minimum Selling price: ", int(msp * 1000), "USD/TON") print("Total purchase cost: ", int(strap_tea.purchase_cost), "USD") print("Total utility cost: ", int(strap_tea.utility_cost), "USD/y") # cost of makeup solvent solvent_cost = ( input_data["Price"]["solvent"] * inlet_solvent * input_data["year_operation_hours"] ) installed_equipment_cost = strap_tea.installed_equipment_cost DPI = strap_tea._DPI(installed_equipment_cost) TDC = strap_tea._TDC(DPI) FCI = strap_tea._FCI(TDC) FOC = strap_tea._FOC(FCI) # AOC = strap_tea._AOC(AOC) ISBL = installed_equipment_cost OSBL = installed_equipment_cost * input_data["OSBL_factor"] ENG = strap_tea._ENG(installed_equipment_cost) CON = strap_tea._CON(installed_equipment_cost) electricity = pp_sep_sys.get_electricity_consumption() # print("Total electricity consumption (kW-h/y): ", electricity) cooling = pp_sep_sys.get_cooling_duty() # print("Total cooling duty (kJ/y): ", cooling) heating = pp_sep_sys.get_heating_duty() # print("Total heating duty (kJ/y): ", heating) results = {} results["Processing capacity (ton/y)"] = ( (inlet_pe) * input_data["year_operation_hours"] / 1000 ) results['Solvent-plastic ratio at dissolution'] = solvent_plastic_ratio # results['Solvent-plastic ratio at dissolution_2'] = solvent_plastic_ratio_2 # results["Recovered plastic PE (kg/hr)"] = round(PE, 4) # results["Recovered plastic PE (kg/hr)"] = round(PE2, 4) results["Solvent cost (USD/y)"] = round(solvent_cost, 2) # results["Solvent recovery (%)"] = 100-solvent_p_loss results["Minimum selling price (USD/kg)"] = round(msp, 4) results["ISBL"] = ISBL results["installed_equipment_cost"] = installed_equipment_cost results["OSBL"] = OSBL results["Engineering"] = ENG results["Contingency"] = CON results["Fixed capital investment"] = FCI results["Fixed operating cost"] = FOC # results["operating cost"] = AOC # changes # variable_cost = results["Solvent cost (USD/y)"] + results["Solvent cost_2 (USD/y)"] + results["Solvent cost_3 (USD/y)"] + strap_tea.utility_cost variable_cost = results["Solvent cost (USD/y)"] + strap_tea.utility_cost results["Variable operating cost"] = variable_cost results["Total electricity consumption (kW-h/y)"] = electricity results["Total cooling duty (kJ/y)"] = cooling results["Total heating duty (kJ/y)"] = heating print("Fixed capital investment: {:.2f} USD".format(FCI)) print("Fixed operating cost: {:.2f} USD/y".format(FOC)) print("Variable operating cost : {:.2f} USD/y".format(variable_cost)) print( "Contribution of solvent to variable cost: ", round(100 * (results["Solvent cost (USD/y)"]) / variable_cost, 2), "%", ) makeup_stream = inlet_solvent - P106.outs[0].get_flow("kg/hr", "Dodecane") results['Solvent makeup flow (kg/hr)'] = makeup_stream print('Solvent makeup flow (kg/hr)', makeup_stream) adjusted_solvent_price = makeup_stream * \ input_data["Price"]["solvent"]/inlet_solvent # print('Adjusted solvent price ($/kg)', adjusted_solvent_price) #######LCA functional_unit = ( inlet_pe * input_data["year_operation_hours"] ) #Total electricity in MJ/y El = electricity * 3.6 #Generated emissions due to electricity Em_electricity = impact_elec * El / functional_unit #kg CO2-eq/MJ * MJ/y / kg CO2/y results['Climate change impact-electricity (kg CO2-eq/kg polymer)'] = Em_electricity print ('Climate change impact-electricity (kg CO2-eq/kg polymer)', Em_electricity) #Total steam in MJ/y St = heating / 1000 #Generated emissions due to steam Em_steam = impact_steam * St / functional_unit #kg CO2-eq/MJ * MJ/y / kg CO2/y results['Climate change impact-steam (kg CO2-eq/kg polymer)'] = Em_steam print ('Climate change impact-steam (kg CO2-eq/kg polymer)', Em_steam) # flow rate of chilled water in kmol/yr flow_water = pp_sep_sys.get_utility_flow("chilled_water") # flow rate of chilled brine in kmol/yr flow_brine = pp_sep_sys.get_utility_flow("chilled_brine") #Total water in m3/y Wa = (flow_water+flow_brine) * 18 / 1000 #Generated emissions due to water consumption (assuming 20% make up) Em_wa = impact_water * Wa * 0.02 / functional_unit results['Climate change impact-water (kg CO2-eq/kg polymer)'] = Em_wa print ('Climate change impact-water (kg CO2-eq/kg polymer)', Em_wa) #Total climate change impact in kg CO2-eq/kg film Emissions = Em_electricity + Em_steam + Em_wa results['Climate change impact (kg CO2-eq/kg polymer)'] = Emissions print ('Climate change impact (kg CO2-eq/kg polymer)', Emissions) with open("_results_simulation.json", "w") as fp: json.dump(results, fp, indent=4) return adjusted_solvent_price def main_simulation(input_data, real_price): # calculate adjusted price using real price adjusted_price = run_simulation(input_data, real_price) # re-calculate costs with adjusted price run_simulation(input_data, adjusted_price) # ====================================================== run simulation # Import input_data.json with main information about the process. with open('input_data.json', 'r') as f: input_data = json.load(f) main_simulation(input_data, input_data["Price"]["solvent"])