/*-*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /*ex: set filetype=cpp softtabstop=4 shiftwidth=4 tabstop=4 cindent expandtab:*/ /* $Id: osaFTControlWAMExample.cpp 3181 2011-11-15 15:41:28Z sleonard $ Author(s): Simon Leonard Created on: 2013-07-22 (C) Copyright 2012 Johns Hopkins University (JHU), All Rights Reserved. --- begin cisst license - do not edit --- This software is provided "as is" under an open source license, with no warranty. The complete license can be found in license.txt and http://www.cisst.org/cisst/license.txt. --- end cisst license --- */ /* This program moves the joints between an initial position qi to a final position qf = qi + 1.0 (rads). Make sure to move to a qi that will avoids interference with the workspace and the WAM (self-collision). */ #include #include #include #include #include #include #include #include #include #include #include #include int getch(){ static struct termios oldt, newt; tcgetattr( STDIN_FILENO, &oldt ); newt = oldt; newt.c_lflag &= ~(ICANON); newt.c_lflag &= ~(ECHO); newt.c_cc[VMIN] = 0; newt.c_cc[VTIME] = 0; tcsetattr( STDIN_FILENO, TCSANOW, &newt ); int c = getchar(); tcsetattr( STDIN_FILENO, TCSANOW, &oldt ); return c; } int main( int argc, char** argv ){ cmnLogger::SetMask( CMN_LOG_ALLOW_ALL ); cmnLogger::SetMaskFunction( CMN_LOG_ALLOW_ALL ); cmnLogger::SetMaskDefaultLog( CMN_LOG_ALLOW_ALL ); if( argc != 3 ){ std::cout << "Usage: " << argv[0] << " can[0-1] robfile" << std::endl; return -1; } osaSocketCAN can( argv[1], osaCANBus::RATE_1000 ); if( can.Open() != osaCANBus::ESUCCESS ){ CMN_LOG_RUN_ERROR << argv[0] << "Failed to open " << argv[1] << std::endl; return -1; } osaWAM osaWAM( &can ); if( osaWAM.Initialize() != osaWAM::ESUCCESS ){ CMN_LOG_RUN_ERROR << "Failed to initialize WAM" << std::endl; return -1; } // WAM initial joint values vctDynamicVector qinit( 7, 0.0 ); qinit[1] = -cmnPI_2; qinit[3] = cmnPI; if( osaWAM.SetPositions( qinit ) != osaWAM::ESUCCESS ){ CMN_LOG_RUN_ERROR << "Failed to set position: " << qinit << std::endl; return -1; } // Rotation of the base vctMatrixRotation3 Rw0( 0.0, 0.0, -1.0, 0.0, 1.0, 0.0, 1.0, 0.0, 0.0 ); vctFixedSizeVector tw0(0.0); vctFrame4x4 Rtw0( Rw0, tw0 ); // Gravity compensation controller osaGravityCompensation GC( argv[2], Rtw0 ); // Goal joint values vctDynamicVector qs( qinit ); // gains (proportional, integral, derivative, anti-windup) vctDynamicVector Kp(7,1800.0,1800.0,1800.0,1800.0,180.0,180.0,40.0); vctDynamicVector Ki(7,3200.0,3200.0,3200.0,3200.0,200.0,200.0,80.0); vctDynamicVector Kd(7, 10.0, 10.0, 10.0, 10.0, 0.8, 0.8, 0.2); vctDynamicVector Kt(7, 5.0); // torque limits vctDynamicVector limit(7, 40.0, 40.0, 40.0, 40.0, 15.0, 15.0, 6.5); osaPIDAntiWindup pid( Kp, Ki, Kd, Kt, limit, qinit ); char c = 'a'; double t1 = osaGetTime(); double t = 0.0; while( c != 'q' ){ char tmp = getch(); if( tmp == 'g' || tmp == 'm' || tmp == 'q' ) { c = tmp; } // Get the positions vctDynamicVector q; if( osaWAM.GetPositions( q ) != osaWAM::ESUCCESS ){ CMN_LOG_RUN_ERROR << "Failed to get positions" << std::endl; return -1; } double t2 = osaGetTime(); double dt = t2 - t1; t1 = t2; switch( c ){ case 'g': { vctDynamicVector tau( q.size(), 0.0 ); if( GC.Evaluate( q, tau ) != osaGravityCompensation::ESUCCESS ){ CMN_LOG_RUN_ERROR << "Failed to evaluate controller" << std::endl; return -1; } if( osaWAM.SetTorques( tau ) != osaWAM::ESUCCESS ){ CMN_LOG_RUN_ERROR << "Failed to set torques" << std::endl; return -1; } qs = q; t=0.0; } break; case 'm': { t += 0.0008; vctDynamicVector qst( qs ); for( size_t i=0; i tau; pid.Evaluate( qst, q, tau, dt ); if( osaWAM.SetTorques( tau ) != osaWAM::ESUCCESS ){ CMN_LOG_RUN_ERROR << "Failed to set torques" << std::endl; return -1; } } break; default: { vctDynamicVector tau( q.size(), 0.0 ); if( osaWAM.SetTorques( tau ) != osaWAM::ESUCCESS ){ CMN_LOG_RUN_ERROR << "Failed to set torques" << std::endl; return -1; } } } } return 0; }