url stringclasses 36
values | page_number int64 1 415 | extracted_answer_choices listlengths 1 17 | extracted_solution stringlengths 1 749 | improved_question_solution stringlengths 58 5.33k | r1_distill_70b_response stringlengths 556 62.4k | __original_row_idx int64 0 2.5k |
|---|---|---|---|---|---|---|
https://www.ttcho.com/_files/ugd/988b76_48944f6ace684143bfdc9080fca59862.pdf | 10 | [
"\"Acetic acid\"",
"\"Acetic anhydride\"",
"\"Acetyl bromide\""
] | "Acetic acid" ||| "Acetic anhydride" ||| "Acetyl bromide" | For Reaction 2, it is specified that it is an esterification reaction involving an acid chloride and an alcohol to yield an ester. In place of the acid chloride, the corresponding carboxylic acid or acid anhydride may be used. Possible alternatives noted include acetic acid or acetic anhydride.
For Reaction 2, sugges... | <think>
Okay, so I'm trying to figure out what compound can be used instead of acetyl chloride in Reaction 2. I remember that Reaction 2 is an esterification reaction where an acid chloride reacts with an alcohol to form an ester. The question mentions that in place of the acid chloride, we can use either the correspon... | 7 |
https://facultystaff.richmond.edu/~lrunyenj/bio201/04bio201%20exam%201%20key.pdf | 1 | [
"NO CHOICES AVAILABLE"
] | 8 | Imagine an individual with the genotype AaDdggRr, where each of these genes is on a different chromosome. How many different gamete types can be formed by this individual with the genotype AaDdggRr? | <think>
Okay, so I have this genetics problem here, right? The individual's genotype is AaDdggRr, and each gene is on a different chromosome. I need to figure out how many different gamete types can be formed by this individual. Hmm, let me start by breaking this down.
First, I remember that each pair of alleles in a ... | 8 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 1 | [
"\"A. e\"",
"\"B. H\"",
"\"C. 13 C\"",
"\"D. 12C\""
] | B is the correct answer. | Carbon-14 is the radioisotope of carbon with the longest half-life. It may be formed by the following reaction:
14N + 1n → 14C + X.
What is the identity of X?
(A). e
(B). H
(C). 13 C
(D). 12C | <think>
Okay, so I need to figure out what X is in this nuclear reaction: 14N + 1n → 14C + X. Hmm, let's see. I remember from my chemistry class that in nuclear reactions, the mass numbers and the atomic numbers must balance on both sides. So, I should try balancing both the mass and the charge.
First, let's look at t... | 0 |
https://facultystaff.richmond.edu/~lrunyenj/bio201/04bio201%20exam%201%20key.pdf | 4 | [
"\"A = straight",
"a = kink",
"B = short",
"b = long\""
] | "A = straight ||| a = kink ||| B = short ||| b = long" | Normal hedgehogs have straight fur and long whiskers. Mutant hedgehogs have been isolated with either kinked fur or short whiskers. The genes for each of these characters are on different chromosomes. The allele for kinked fur is recessive to the allele for straight fur. The allele for short whiskers is dominant to the... | <think>
Okay, so I need to figure out how to create a legend for each trait in hedgehogs using the given alleles. Let me start by breaking down the information provided.
First, there are two traits: fur type and whisker type. Each is controlled by genes on different chromosomes, which means they assort independently. ... | 18 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 2 | [
"\"A. 38.000\"",
"\"B. 37.965\"",
"\"C. 37.963\"",
"\"D. 39.948\""
] | D is the correct answer. | Argon consists of three stable isotopes:
Isotope Mass Abundance
Ar-36 35.968 0.334%
Ar-38 37.963 0.062%
Ar-40 39.963 99.604%
What is the atomic mass of Argon?
(A). 38.000
(B). 37.965
(C). 37.963
(D). 39.948 | <think>
First, I need to calculate the atomic mass of Argon based on its isotopes. Argon has three main isotopes: Ar-36, Ar-38, and Ar-40.
I'll start by listing the mass and abundance of each isotope:
- Ar-36 has a mass of 35.968 and an abundance of 0.334%.
- Ar-38 has a mass of 37.963 and an abundance of 0.062%.
- Ar... | 19 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 8 | [
"\"cysteine\"",
"\"methionine\""
] | "cysteine" | Taurine (from Latin *taurus* – after the first isolation from ox bile) is a small non-proteinogenic amino acid. Its systematic name is 2-aminoethanesulfonic acid. Being a sulfonic acid, it has no carboxyl group, which is an integral part of all proteinogenic amino acids. Taurine is a common ingredient in energy drinks ... | <think>
Alright, so I'm trying to figure out which proteinogenic amino acid the body uses to synthesize taurine. The question mentions that taurine is derived from the oxidation and decarboxylation of a proteinogenic amino acid in the liver. I know that taurine is a sulfonic acid, and it's important in various bodily f... | 13 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 28 | [
"\"A. MgBr₂\"",
"\"B. Mg/Et₂O\"",
"\"C. Mg / HCl (aq)\"",
"\"D. Mg/Br₂ (g)\""
] | B is the correct answer | Formation of a Grignard reagent from an alkyl bromide. Requires magnesium in the presence of an ethereal solvent. What is the identity of reagent / reactant (iv)?
(A). MgBr₂
(B). Mg/Et₂O
(C). Mg / HCl (aq)
(D). Mg/Br₂ (g) | <think>
Okay, so I have this question about Grignard reagents, and I need to figure out the identity of reagent or reactant (iv). The options are A through D, and the question mentions that the formation of a Grignard reagent from an alkyl bromide requires magnesium in the presence of an ethereal solvent. Let me try to... | 15 |
https://www.ttcho.com/_files/ugd/988b76_ba0cb3177d05436da273a400a037ed01.pdf | 25 | [
"(i) CO2 (1 mark)",
"(ii) methylamine / CH3NH2 (2 marks)"
] | (i) CO2 ||| (ii) methylamine / CH3NH2 | Methyl isocyanate reacts with water to yield: (i) a colourless gas that turns limewater milky and (ii) a gas that has a strong odour similar to fish. Identify products (i) and (ii). (3 marks) | <think>
Okay, so I have this chemistry problem here: when methyl isocyanate reacts with water, it produces two gases. One is a colorless gas that makes limewater milky, and the other has a strong smell like fish. I need to figure out what these products are.
First, I should probably recall what methyl isocyanate is. I... | 17 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 7 | [
"NO CHOICES AVAILABLE"
] | 0.04103 mol dm³ | What is the molar concentration of air in an ordinary auditorium where Chemistry Race is held, in moldm³? Consider ideal behavior, a temperature of 20°C, a pressure of 100 000 Pa. | <think>
Alright, so I have this problem where I need to find the molar concentration of air in an ordinary auditorium. Hmm, okay, molar concentration is usually moles per volume, right? So that would be in mol/m³. The problem specifies that I should consider ideal behavior, which means I can probably use the ideal gas ... | 2 |
http://chemistryrace.com/wp-content/uploads/2024/02/ChR_2024_answer_booklet.pdf | 8 | [
"NO CHOICES AVAILABLE"
] | (The structural formula of gallic acid as depicted in the text.) | An important group of tannins are the esters of gallic acid and saccharides. A typical example is tannic acid (see appendix). The heating of this acid causes hydrolysis of the ester bonds and the release of gallic acid, which is used to make oak gall ink. Draw the structural formula of gallic acid. Hint: all of the est... | <think>
Okay, so I need to figure out the structural formula of gallic acid when all the ester bonds in tannic acid are hydrolyzed upon heating. I remember that tannic acid is a tannin, which is an ester of gallic acid and some kind of sugar. From the question, it sounds like heating breaks all the ester bonds, releasi... | 21 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 23 | [
"A: UV light",
"B: Ninhydrin",
"C: Methyl orange",
"D: Phenolphthalein"
] | A is the correct answer | Given that the stationary phase is silica gel, a polar substance, which of the following is likely to be the reaction that was performed?
What is the best method for visualization of the TLC spots of this reaction mixture?
(A). UV light
(B). Ninhydrin
(C). Methyl orange
(D). Phenolphthalein | <think>
Okay, so I'm trying to figure out this TLC question. Let's start by understanding what the question is asking.
The stationary phase in TLC is silica gel, which is a polar substance. That's important because in TLC, the stationary phase is what interacts with the compounds in the mixture. Polar compounds tend ... | 26 |
https://www.mit.edu/~anugrah/files/MockIChOSolutions.pdf | 17 | [
"\"free response\""
] | "μ(Ο-Η) = .94118 amu, μ(O-D) = 1.7778 amu" | You should use integer molar masses: m(H) = 1 amu, m(O) = 16 amu. Calculate, in amu, the reduced mass of the O-H bond and the O-D bond respectively. | <think>
Okay, so I need to figure out the reduced masses of the O-H bond and the O-D bond. Hmm, reduced mass isn't something I hear about every day, but I think it's a concept from physics or chemistry, maybe spectroscopy? Let me try to recall. I remember that the reduced mass is used when dealing with two-body problem... | 9 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 30 | [
"\"A: Nylon-6,6\"",
"\"B: PTFE\"",
"\"C: PVC\"",
"\"D: Cellulose\""
] | A is the correct answer | Consider the ring opening polymerization of caprolactam: Which of the following polymers would you expect to have similar physical properties to the polymer above?
(A). Nylon-6,6
(B). PTFE
(C). PVC
(D). Cellulose
| <think>
Alright, so I have this question about the ring-opening polymerization of caprolactam and which polymer would have similar physical properties. The options are Nylon-6,6, PTFE, PVC, and Cellulose. I'm a bit rusty on my polymer chemistry, but let me think through this step by step.
First, I need to understand w... | 24 |
http://chemistryrace.com/wp-content/uploads/2024/02/ChR_2024_answer_booklet.pdf | 33 | [
"NO CHOICES AVAILABLE"
] | 2.1 g | Here's the text addition to ensure the question is answerable:
In such a titration, the phenol is brominated three times, and the end of the titration is indicated by the fact that the additional bromine no longer reacts, but remains in the titrated mixture. The molar amount of bromine can be calculated based on the ... | <think>
Okay, so I have this problem about titration involving phenol and bromine. Hmm, let me think about what I know. Titration is a method used to determine the concentration of a substance by reacting it with a solution of known concentration. In this case, phenol is being brominated three times. I remember phenol ... | 11 |
http://chemistryrace.com/wp-content/uploads/2023/02/chemistry_race_2023_answers-book.pdf | 8 | [
"NO CHOICES AVAILABLE"
] | chlorine (Cl2) | An entrepreneur is setting up an element shop which sells samples of all of the chemical elements with atomic numbers less than zinc to chemistry fans. As an opening promotion, they are selling all of the elements at £5 per gram. Excited to get my hands on some samples, I bought 1 liter balloons of all of the gases the... | <think>
Okay, so there's this entrepreneur who's setting up a shop selling samples of all the chemical elements with atomic numbers less than zinc. Zinc has an atomic number of 30, right? So, the shop sells elements from 1 (Hydrogen) up to 29 (Copper). They’re promoting by selling each element at £5 per gram. Now, the ... | 10 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 33 | [
"\"A. 2\"",
"\"B. 3\"",
"\"C. 4\"",
"\"D. 6\""
] | "B. 3" | Nuclear Magnetic Resonance (NMR) Spectroscopy is a powerful tool for the structural elucidation of unknown compounds. In 'H NMR, protons which have identical chemical (and magnetic) properties will appear as a single peak in the NMR spectra. For example, the following is a low resolution spectra of dimethyl ether:
Ho... | <think>
Okay, so I need to figure out how many peaks the NMR spectra of ethanol would have. I remember from my notes that NMR spectroscopy shows different peaks for protons that are in different chemical environments. So, if all the protons in a molecule are the same, they'll show up as a single peak. But if they have ... | 22 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 23 | [
"A: 0.29",
"B: 0.72",
"C: 0.00",
"D: 1.20"
] | A is the correct answer | The Rf value can be calculated using the formula: Rf = distance moved by spot / distance moved by solvent from the starting position of the spot. The distance moved by the spot of the starting material is reported as 0.95 cm, while the total distance moved by the solvent is 3.1 cm.
What is the Rf of the starting mate... | <think>
First, I identify the values provided: the distance moved by the spot (starting material) is 0.95 cm, and the distance moved by the solvent is 3.1 cm.
Next, I apply the Rf formula by dividing the distance moved by the spot by the distance moved by the solvent: Rf = 0.95 cm / 3.1 cm.
Calculating the division g... | 27 |
https://www.ttcho.com/_files/ugd/988b76_e3d21fc42bb24de4959d7250f0cfcb3a.pdf | 18 | [
"\"A. 0\"",
"\"B. + 2\"",
"\"C. - 2\"",
"\"D. + 7\""
] | D is the correct answer. | KMnO4/H⁺ is slowly added to compound A. The oxidation numbers of: K = +1; O = -2. KMnO4 is a neutral compound, and therefore the sum of all charges of individual atoms present in its structure must be equal to 0: (1 x K) + (1 x Mn) + (4 x O) = 0; (1 x +1) + (1 x Mn) + (4 x -2) = 0. Mn = +7. What is the oxidation number... | <think>
To determine the oxidation number of manganese (Mn) in potassium permanganate (KMnO₄), I'll follow these steps:
1. **Understand the Formula**: KMnO₄ consists of potassium (K), manganese (Mn), and oxygen (O) atoms.
2. **Assign Known Oxidation Numbers**:
- Potassium typically has an oxidation number of +1.
... | 62 |
https://uwaterloo.ca/chemistry/sites/default/files/uploads/documents/avogadro-exam-solution-2007.pdf | 7 | [
"\"A: CH\"",
"\"B: CH2\"",
"\"C: CH3\"",
"\"D: CH4\"",
"\"E: C3H4\""
] | "B: CH2" | A compound of carbon and hydrogen is found to be 85.6% carbon by mass and 14.38% hydrogen. What is the simplest formula of the compound?
<bold>A</bold> CH
*<bold>B</bold> CH2
<bold>C</bold> CH3
<bold>D</bold> CH4
<bold>E</bold> C3H4 | <think>
To determine the simplest formula of the compound, I will start by assuming a 100-gram sample, which makes the percentages of carbon and hydrogen equal to their masses. This means there are 85.6 grams of carbon and 14.38 grams of hydrogen in the compound.
Next, I will convert these masses into moles by dividin... | 31 |
https://facultystaff.richmond.edu/~lrunyenj/bio201/04bio201%20exam%201%20key.pdf | 1 | [
"NO CHOICES AVAILABLE"
] | ADG, Adg, aDg, adg | Imagine an individual with the genotype AaDdgg, where each of these genes is on a different chromosome. What are the gametes formed by an individual with the genotype AaDdgg? | <think>
First, I need to understand the genotype provided, which is AaDdgg. Each of these genes is on a different chromosome, meaning they assort independently during gamete formation.
The genotype can be broken down into three separate genes:
1. Aa (with alleles A and a)
2. Dd (with alleles D and d)
3. gg (with allel... | 50 |
http://chemistryrace.com/wp-content/uploads/2022/02/cambridge_chemistry_race_2022_answers.pdf | 3 | [
"NO CHOICES AVAILABLE"
] | carbon dioxide (CO2) | Vitamin C is probably the most used supplement for boosting immunity. It is usually sold in the form of pills or gelatin capsules. However, in our task, we will take a look at the fizzy tablet Celaskon (for making into a beverage). It contains: ascorbic acid, citric acid, sorbitol, sodium bicarbonate, lactose, orange a... | <think>
Okay, so I'm trying to figure out what gas is produced when the fizzy tablet Celaskon reacts with water. I remember that fizzy tablets usually have some kind of effervescent effect when they come into contact with water, which makes them dissolve and create a bubbling drink. The question lists several ingredien... | 51 |
http://chemistryrace.com/wp-content/uploads/2024/02/ChR_2024_answer_booklet.pdf | 10 | [
"NO CHOICES AVAILABLE"
] | 1.996 megatons | A huge deposit of lithium ore is located under the Czech mountain Cínovec, which has an estimated mass of 134 million tons and an average lithium content of 0.28% (by weight). How many megatons of lithium carbonate could be produced from this reserve? | <think>
Okay, so I have to figure out how many megatons of lithium carbonate can be produced from a reserve of lithium ore. The reserve is 134 million tons with an average lithium content of 0.28% by weight. Hmm, okay. Let's break this down step by step.
First off, the total mass of the ore is given as 134 million ton... | 20 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 38 | [
"\"free response\""
] | "42 mM" | If a person consumes enough lactose such that its reaction velocity, v, with lactase-phlorizin hydrolase is exactly two-thirds of the maximum, Vmax, and given that the Michaelis constant, KM, for lactase-phlorizin hydrolase is 21 mM, what concentration of lactose [S] was digested, in mM? | <think>
Okay, so I have this enzyme kinetics problem here, and I need to figure out the concentration of lactose ([S]) that someone digested. Let me start by understanding the problem.
They told me that the reaction velocity, v, is exactly two-thirds of the maximum velocity, Vmax. So, v = (2/3)Vmax. I also know that t... | 59 |
https://www.ttcho.com/_files/ugd/988b76_48944f6ace684143bfdc9080fca59862.pdf | 17 | [
"\"Amide\"",
"\"Ester\"",
"\"Aromatic\""
] | "free response answer" | Identify three (3) functional groups in carbaryl. (3 marks)
Amide
Ester
Aromatic
(1 mark) x 3
Identify three functional groups in carbaryl. (3 marks) | <think>
Okay, so I have to identify three functional groups in carbaryl. I've heard of carbaryl before, it's an insecticide, right? But I'm not exactly sure about its chemical structure. Let me think. I remember that carbaryl is also known as Sevin. It's a carbamate insecticide, so its structure probably includes a car... | 39 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 34 | [
"\"A: 2\"",
"\"B: 3\"",
"\"C: 4\"",
"\"D: 6\""
] | "B is the correct answer" | Nuclear Magnetic Resonance (NMR) Spectroscopy is a powerful tool for the structural elucidation of unknown compounds. In 'H NMR, protons which have identical chemical (and magnetic) properties will appear as a single peak in the NMR spectra. Consider the structure of ethanol; there are three distinct groups of protons ... | <think>
Okay, so I need to figure out how many peaks there would be in the NMR spectrum of ethanol. I'm a bit rusty on my NMR, but I remember that the number of peaks corresponds to the number of distinct proton environments in the molecule.
Ethanol has the chemical formula CH3CH2OH. Let me visualize the structure: a... | 65 |
https://www.ttcho.com/_files/ugd/988b76_ba0cb3177d05436da273a400a037ed01.pdf | 27 | [
"NO CHOICES AVAILABLE"
] | "0.001 moldm³" | From Figure 2, this occurs when the pH = 11.0. The highest rate of hydrolysis occurs when there is the greatest change in concentration of carbaryl over the period of monitoring.
Calculate the [OH] at which there is the highest rate of hydrolysis of carbaryl. | <think>
Okay, so I'm trying to figure out the [OH] at which the hydrolysis of carbaryl happens the fastest. The question says that from Figure 2, this occurs when the pH is 11.0. Hmm, so if I can find the OH- concentration from pH 11.0, that should be my answer.
Wait, do I remember how to convert pH to OH- concentrati... | 54 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 16 | [
"NO CHOICES AVAILABLE"
] | 6.81 g ℓ−1 | It is known that the complexation reaction between Ca2+ and EDTA proceeds in a 1:1 mole ratio. Calculate the concentration of Ca2+ in g ℓ−1 if 42.50 ml of EDTA solution of concentration 0.10 mol dm−3 is used to titrate 25.00 ml of nejayote? | <think>
Okay, so I have this chemistry problem here where I need to calculate the concentration of Ca²⁺ in grams per liter (g/L) after a titration with EDTA. Let me see if I can break this down step by step.
First off, I remember that EDTA (ethylenediaminetetraacetic acid) is a chelating agent, which means it can form... | 3 |
https://www.ttcho.com/_files/ugd/988b76_ba0cb3177d05436da273a400a037ed01.pdf | 26 | [
"\"CO2\"",
"\"methylamine / CH3NH2\""
] | CO2, methylamine / CH3NH2 | Methyl isocyanate reacts with water to yield a colourless gas that turns limewater milky and a gas that has a strong odour similar to fish. Identify products (i) and (ii).
(i) a colourless gas that turns limewater milky and
(ii) a gas that has a strong odour similar to fish. Identify products (i) and (ii). | <think>
Okay, so I have to figure out the products formed when methyl isocyanate reacts with water. Hmm, methyl isocyanate is CH3NCO, right? I remember that isocyanates react with water, but I'm a bit fuzzy on the exact products.
Let me think. Isocyanates, in general, react with water to form amines and carbon dioxide... | 30 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 19 | [
"\"free response\""
] | "57.37 h" | Caesium metal has been obtained historically by the electrolysis of caesium cyanide:
2 CsCN + 2e® → 2Cs + C2N2. Calculate how long (in hours) the electrolysis using 10 A current must run to produce enough cesium metal to form the eutectic alloy upon reaction with 250 g of potassium. Assume that the reaction proceeds ... | <think>
Okay, so I need to figure out how long to run the electrolysis of caesium cyanide (CsCN) to produce enough cesium to form a eutectic alloy with 250 grams of potassium. Hmm, let's break this down step by step.
First, I should probably recall what a eutectic alloy is. From what I remember, a eutectic mixture is ... | 1 |
https://www.cheminst.ca/wp-content/uploads/2022/12/Canadian-Chemistry-Olympiad-2022-EN_key.pdf | 16 | [
"\"free response\""
] | "Vmin = 2.75 L" | Initial moles of A and B are nA = 0.0204 mol and nB = 0.184 mol. The reaction is 2B → A. The formula for Vmin is given as Vmin = nA RT / P where nA is the number of moles of A at the completion of the reaction. Calculate the value of Vmin, the minimum volume of compartment 1 at 1 atm. The initial moles of A and B are n... | <think>
Okay, so I have this chemistry problem here about finding the minimum volume, Vmin, of a compartment after a reaction. Let's see. The reaction given is 2B → A. The initial moles are nA = 0.0204 mol and nB = 0.184 mol. They also say that Vmin can be calculated using the formula Vmin = nA RT / P. Hmm, I need to f... | 12 |
https://www.mit.edu/~anugrah/files/2012CChOLocalSoln.pdf | 1 | [
"NO CHOICES AVAILABLE"
] | Thus the solid residue is CuO. | The compound [Cu(pydc)(amp)]·3H2O has formula C11H14CuN4O7 (pydc and amp are organic ligands containing aromatic rings). Thermogravimetric analysis shows that the compound thermally decomposes in two steps. The first weight loss peak accounts for a weight loss of approximately 15%. The second decomposition occurs betwe... | <think>
Okay, so I have this compound [Cu(pydc)(amp)]·3H2O with the formula C11H14CuN4O7. I need to figure out what the solid residue is after heating it to 500°C. The problem says it decomposes in two steps. The first step is a 15% weight loss, and the second happens between 400-500°C, leaving a residue that's 21% of ... | 29 |
https://www.ttcho.com/_files/ugd/988b76_e3d21fc42bb24de4959d7250f0cfcb3a.pdf | 18 | [
"\"A. The purple colour disappears\"",
"\"B. No visible reaction\"",
"\"C. The orange colour disappears\"",
"\"D. A green solution is formed\""
] | A is the correct answer. | KMnO4/H⁺ is slowly added to compound A. KMnO4/H⁺ is an oxidizing agent, and compound A is capable of undergoing oxidation (primary alcohol to carboxylic acid). The oxidizing agent will undergo reduction, leading to the disappearance of the purple color. What will be observed when the KMnO4/H mixes with compound A?
(A... | <think>
Okay, so I have this chemistry problem here, and I need to figure out the answer. The question is about the reaction between KMnO4 in an acidic medium (H⁺) and a compound A. KMnO4 is a strong oxidizing agent, and compound A is capable of undergoing oxidation, specifically from a primary alcohol to a carboxylic ... | 44 |
http://chemistryrace.com/wp-content/uploads/2022/02/cambridge_chemistry_race_2022_answers.pdf | 3 | [
"NO CHOICES AVAILABLE"
] | 0.1614 g/L | Helium is formed by radioactive decay of uranium in the crust and accumulates in pockets deep beneath the surface. This makes helium hard to find, and expensive to extract. Helium is unusual because, if it is not recaptured after use, it has sufficiently low density to escape the Earth's gravity. Work out the density o... | <think>
Okay, so I need to figure out the density of helium at RTP, which stands for Room Temperature and Pressure. I remember RTP is typically defined as 25 degrees Celsius and 100 kPa. I think I can use the ideal gas law for this because helium behaves like an ideal gas under these conditions.
First, let me recall ... | 23 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 28 | [
"\"A. CO₂\"",
"\"B. COOH\"",
"\"C. H\"",
"\"D. CH₃\""
] | C is the correct answer | Reaction of a Grignard reagent with CO₂ (g) will yield a carboxylate salt. Subsequent addition of H⁺ (aq) results in a carboxylic acid. What is the identity of Compound C?
(A) CO₂
(B) COOH
(C) H
(D) CH₃ | <think>
Okay, so I'm trying to figure out this chemistry problem. It’s about Grignard reagents reacting with CO₂ and then adding H⁺ to get a carboxylic acid. I need to find out what Compound C is. The options are CO₂, COOH, H, or CH₃.
First, I remember that Grignard reagents are organomagnesium compounds, usually in t... | 52 |
https://www.mit.edu/~anugrah/files/MockIChOSolutions.pdf | 13 | [
"NO CHOICES AVAILABLE"
] | Formula = (WO₃)ₓₙO₂⁻ | Problem 3. Wolfram, 钨, вольфрамma التنغست. Draw the structure of a tungstate polymer, and write a generic formula in terms of Xₙ, the number of monomer units in the polymer (henceforth referred to as the polymer length).
[O-W-O-W-O]
|| ||
O O
n
Anything reasonable will be accepted.
Question: Dra... | <think>
Okay, so I need to figure out how to draw the structure of a tungstate polymer and write a generic formula for it. I'm a bit rusty on this, but I remember that tungsten (W) is involved, and it's similar to some polymetallic acid structures like molybdates or chromates.
First, I think tungstate ions are usually... | 25 |
http://chemistryrace.com/wp-content/uploads/2024/02/ChR_2024_answer_booklet.pdf | 5 | [
"\"1c\"",
"\"2a\"",
"\"3d\"",
"\"4b\""
] | "1c, 2a, 3d, 4b" | Recently, there has been a lot of discussion about which energy sources the UK should invest in. Can you recognise the main reaction serving as an energy source in each type of power plants mentioned below? Match the equation with the corresponding power plant.
1. Nuclear fusion (lately successfully performed with a po... | <think>
Okay, so I have this question where I need to match four different power plants with their corresponding chemical reactions that serve as their main energy sources. The power plants are nuclear fusion, coal, nuclear fission, and natural gas. The reactions given are (a) through (d).
Let me start by recalling wh... | 100 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 34 | [
"\"A: I only\"",
"\"B: II only\"",
"\"C: II and III only\"",
"\"D: III and IV only\""
] | "C is the correct answer" | The Thalidomide disaster occurred in the 1950s and resulted in 1000s of babies being born with severe birth defects. Isomer C was used for the treatment of morning sickness in pregnant women, while isomer D was responsible for the birth defects. However, even if a pregnant woman took exclusively isomer C, birth defects... | <think>
Okay, so I have this question about the Thalidomide disaster and isomers. Let me try to think through it step by step. I'm a bit rusty on some of this, but I'll try to recall what I know about isomers and thalidomide.
First, the Thalidomide disaster happened in the 1950s. It was a drug given to pregnant women ... | 28 |
http://chemistryrace.com/wp-content/uploads/2023/02/chemistry_race_2023_answers-book.pdf | 24 | [
"NO CHOICES AVAILABLE"
] | P4 + 10 CuSO4 + 16 H2O → 10 Cu + 10 H2SO4 + 4H3PO4 | Here is the text extraction from the PDF, with the requested formatting:
Copper ions are reduced to copper metal and phosphorus is oxidized. In this way, the phosphorus is covered by a copper layer and cannot continue to burn. Write a balanced chemical equation for the reaction that takes place when copper sulfate sol... | <think>
Okay, so I have this problem where I need to write a balanced chemical equation for the reaction between copper sulfate solution and white phosphorus (P4). Hmm, let me try to figure this out.
First, I remember that copper sulfate is CuSO4, which when dissolved in water, dissociates into Cu²+ and SO4²- ions. Wh... | 47 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 2 | [
"\"A. e\"",
"\"B. 1H\"",
"\"C. 13C\"",
"\"D. 12C\""
] | B is the correct answer. | Carbon-14 is the radioisotope of carbon with the longest half-life. It may be formed by the following reaction: 14N + 1n → 14C + X. What is the identity of X in the reaction 14N + 1n → 14C + X?
(A). e
(B). 1H
(C). 13C
(D). 12C | <think>
Okay, so I've got this problem here about carbon-14 formation. The reaction is 14N plus a neutron producing 14C and some unknown X. I need to figure out what X is from the options given. Hmm, let me think.
First off, I remember that in nuclear reactions, the total mass and charge have to be conserved. So, what... | 41 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 20 | [
"NO CHOICES AVAILABLE"
] | 57.37 h | Sodium and potassium, which are both solid at room temperature, if combined at the correct ratio famously form a highly reactive liquid alloy known as “NaK”. This is an example of a eutectic system, i.e. a homogeneous mixture possessing a melting point lower than the individual components. A lesser known alkali metal e... | <think>
Okay, so I have this chemistry problem here. Let me try to understand it step by step. The problem is about calculating how long an electrolysis process must run to produce enough cesium metal to form a eutectic alloy with potassium. The formula of the alloy is given as Cs77K23, and it's supposed to have a melt... | 42 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 25 | [
"NO CHOICES AVAILABLE"
] | The approximate change of Gibbs free energy for the isomerization of E-azobenzene to Z-azobenzene is 61.91 kJ mol¯¹. | Azobenzene is a well-known molecule and the parent structure of various molecular switches. The switching mechanism consists of a photochemically induced change in the double bond conformation from E- to Z- and vice versa. The wavelength of light necessary for the transformation of E-azobenzene to Z-azobenzene is 365 n... | <think>
Okay, so I need to figure out the change in Gibbs free energy for the isomerization of E-azobenzene to Z-azobenzene. Hmm, I know that Gibbs free energy change (ΔG) is related to the energy of the photons involved in the reaction. The problem gives me the wavelengths for the forward and reverse processes, which ... | 53 |
http://chemistryrace.com/wp-content/uploads/2024/02/ChR_2024_answer_booklet.pdf | 33 | [
"NO CHOICES AVAILABLE"
] | Methane and t-butyl cation. | Carborane acids are a family of the strongest known acids to be made: they can readily protonate hydrocarbons. This is because the carborane counterion is exceptionally stable. While carborane acids are an excellent donor of H⁺, the molecule Me(CHB₁₁Me₅Br₆), known affectionately as 'mighty methyl', is a ready source of... | <think>
Alright, I'm trying to figure out the structures of Product A and Product B from the reaction of 'mighty methyl' (Me(CHB₁₁Me₅Br₆)) with n-butane. Okay, let's start by breaking this down.
First, 'mighty methyl' is a source of the CH₃⁺ cation. So when it reacts with n-butane, which is a hydrocarbon, I'm guessing... | 58 |
https://www.mit.edu/~anugrah/files/MockIChOSolutions.pdf | 17 | [
"\"free response\""
] | "free response answer" | Ammonium chloride is both an acid and a source of chloride. The ammonium is a source of acid, which makes dichromate a stronger reducing agent, as well as producing H2. The chloride precipitates the Pb2+ formed, preventing it from interfering with the titration with tungsten (if for example it was oxidized). Propose a ... | <think>
Okay, so I have this chemistry question about why a titration procedure would be less accurate without ammonium chloride. Hmm, let me try to think this through step by step.
First, I remember that ammonium chloride is often used in laboratory settings, especially in titrations. I think it serves a couple of pu... | 70 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 49 | [
"NO CHOICES AVAILABLE"
] | 6.02 °C | Pepa bought a cold beer at the store, but on the way home he realised that he had mistakenly bought non-alcoholic beer. So he decided to fix it by adding 20g of ethanol for UV-VIS spectroscopy (purity min. 99.99%), which he stores in a refrigerator at 4°C. But as an educated chemist, he knew that mixing water with etha... | <think>
Alright, let me try to figure out this problem step by step. So, Pepa added 20 grams of ethanol to 500 grams of water, and we need to find out the resulting temperature of the mixture. The initial temperature is 4°C, and we’re given the heat capacity of the mixture as 75.35 J/mol·K. Hmm, okay.
First, I rememb... | 35 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 26 | [
"NO CHOICES AVAILABLE"
] | "61.91 kJ mol¯¹." | Azobenzene is a well-known molecule and the parent structure of various molecular switches. The switching mechanism consists of a photochemically induced change in the double bond conformation from E- to Z- and vice versa. The wavelength of light necessary for the transformation of E-azobenzene to Z-azobenzene is 365 n... | <think>
Okay, so I need to figure out the change in Gibbs free energy for the isomerization of E-azobenzene to Z-azobenzene using the energy of the photon with wavelength 365 nm. Hmm, Gibbs free energy change, ΔG, is related to the energy of the photon here because we're assuming no energy is lost, so all the photon en... | 55 |
https://www.mit.edu/~anugrah/files/MockIChOSolutions.pdf | 10 | [
"\"2Cu2+ + 4I- → 2CuI + I2\"",
"\"2Cu2+ + 5I → 2CuI + I3\""
] | Either of "2Cu2+ + 4I- → 2CuI + I2" or "2Cu2+ + 5I → 2CuI + I3" | Here's the extracted text, with formatting:
Here's the extracted text, with formatting: In the context of the reaction involving copper ions and iodide ions, the balanced equation for the reaction of Cu2+ and I- can be expressed as:
- 2Cu2+ + 4I- → 2CuI + I2
or
- 2Cu2+ + 5I- → 2CuI + I3.
What is the balanced equati... | <think>
Okay, so I have this chemistry problem here about balancing an equation involving copper ions and iodide ions. The user mentioned two possible reactions:
2Cu²⁺ + 4I⁻ → 2CuI + I₂
or
2Cu²+ + 5I⁻ → 2CuI + I3.
And they're asking for the balanced equation. Hmm, I need to figure out which one is correct or mayb... | 79 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 20 | [
"NO CHOICES AVAILABLE"
] | 0.66 g/l | Classic Coca-Cola has a pH of 2.37, in comparison 8% vinegar has a pH of approximately 2.6. Coca-Cola is therefore more acidic than the vinegar commonly used for descaling. The pH of Coca-Cola is due solely to phosphoric acid, which is a tri-saturated acid with pKa1 = 2.14, pKa2 = 7.20, and pKa3 = 12.37. Calculate the ... | <think>
Okay, so I need to figure out the mass concentration of phosphoric acid in Coca-Cola, given that its pH is 2.37. I know that phosphoric acid is a triprotic acid with three dissociation constants: pKa1 = 2.14, pKa2 = 7.20, and pKa3 = 12.37. Since the pH of Coca-Cola is 2.37, which is pretty close to the first pK... | 16 |
http://chemistryrace.com/wp-content/uploads/2023/02/chemistry_race_2023_answers-book.pdf | 29 | [
"NO CHOICES AVAILABLE"
] | 90 | How many sigma bonds are there in the C₆₀ fullerene (a fullerene containing 60 carbon atoms)? | <think>
Okay, so I have this question: How many sigma bonds are there in the C₆₀ fullerene? Hmm, I remember that fullerenes are a form of carbon, like the famous buckyball. C₆₀ is one of the most common, and it has a structure similar to a soccer ball, right? All the carbons are arranged in a sphere with pentagons and ... | 56 |
https://www.usabo-trc.org/sites/default/files/images/pdf/exams/semifinal-answers/2011-semifinal-answers.pdf | 43 | [
"\"free response\""
] | "free response answer" | Gametophytes are much reduced in angiosperms. A major advance is the evolution of pollen. The pollen grain falls on the stigma, and a pollen tube grows down the style and delivers 2 sperm directly to the embryo sac—there is no need for flagellated sperm. Double fertilization gives rise to a zygote and triploid endosper... | <think>
Okay, so I have this question about gametophytes in angiosperms. I need to think through what I know about this. From the given information, it says that gametophytes are much reduced in angiosperms, which means they're simpler or less complex compared to other plants. I remember that in angiosperms, the gameto... | 76 |
http://chemistryrace.com/wp-content/uploads/2024/02/ChR_2024_answer_booklet.pdf | 7 | [
"NO CHOICES AVAILABLE"
] | 290 hydrogen atoms. | Grossane is our affectionate name for a saturated straight-chain alkane containing 144 carbon atoms. Alkanes have the general formula CnH2n+2. How many hydrogen atoms does a grossane molecule contain? | <think>
Okay, so I have this problem here about a molecule called Grossane. It's described as a saturated straight-chain alkane with 144 carbon atoms. The question is asking how many hydrogen atoms are in a Grossane molecule. I know that alkanes have the general formula CnH2n+2, so I need to apply that formula to find ... | 124 |
https://www.ttcho.com/_files/ugd/988b76_ba0cb3177d05436da273a400a037ed01.pdf | 6 | [
"\"SO2\""
] | SO2 | Chalcopyrite is a naturally occurring mineral with the formula: CuFeS2. Copper metal can be extracted by the complete open air combustion of Chalcopyrite in the presence of silica. The other products of this reaction are: ferrosilite (FeSiO3) and a colourless gas with a suffocating odour. The gas produced reacts with N... | <think>
Okay, so I have this problem where I need to figure out the identity of a gas produced when Chalcopyrite (CuFeS₂) is combusted in the presence of silica. The gas reacts with NaOH to yield sodium sulfite. Hmm, let me break this down.
First, I remember that when metals or ores are combusted, especially in the pr... | 64 |
https://www.mit.edu/~anugrah/files/2012CChOLocalSoln.pdf | 5 | [
"NO CHOICES AVAILABLE"
] | X⁺ = H₅O₂⁺ | Here's the relevant context:
Neutron diffraction experiments carried out in 1967 determined that there are only three ions in the crystal structure of trans-[Co(en)₂Cl₂]Cl·HCl·2H₂O: X⁺, Cobalt-containing A⁺ and Cl. All atoms in X⁺ are coplanar. X⁺ also has a center of symmetry and three mirror planes that are perpendi... | <think>
Alright, so I'm trying to figure out the structural formula of X⁺, which is given as H₅O₂⁺. Let me start by understanding the problem.
First, from the context, the compound is trans-[Co(en)₂Cl₂]Cl·HCl·2H₂O. They performed a neutron diffraction experiment in 1967, which identified that there are three ions in t... | 101 |
https://uwaterloo.ca/chemistry/sites/default/files/uploads/documents/avogadro-exam-solution-2007.pdf | 7 | [
"\"A: 0.2 mol L-1 CaCl2, 110.98 g mol-1\"",
"\"B: 0.1982 mol L-1\"",
"\"C: 0.198 mol L-1\"",
"\"D: 0.2000 mol L-1\"",
"\"E: 0.20 mol L-1\""
] | "D: 0.2000 mol L-1" | A calcium chloride solution was prepared by dissolving 11.00 g CaCl2 in water to make 500 mL of solution. The number of significant figures in the volume is ambiguous (i.e. we don't know if the zeros are significant), so we must assume the worst: that the volume is known only to 1 significant figure. Therefore, we repo... | <think>
Okay, so I have this problem about preparing a calcium chloride solution and determining the correct concentration to report. Hmm, let me see. The problem states that 11.00 grams of CaCl2 is dissolved in water to make 500 mL of solution. It mentions something about significant figures in the volume being ambigu... | 109 |
http://chemistryrace.com/wp-content/uploads/2022/02/cambridge_chemistry_race_2022_answers.pdf | 27 | [
"NO CHOICES AVAILABLE"
] | 1H3+ | It is a known fact that hydrogen is the most abundant element in interstellar space. But what is the most abundant ion in interstellar space? It is a molecular ion with a charge to mass ratio of 1:3 and two electrons in total. (The charge is in units of elementary charge and the mass in atomic mass units.) Give the for... | <think>
Okay, so I'm trying to figure out the most abundant ion in interstellar space. I know hydrogen is the most abundant element, so maybe it's related, but this question is specifically about an ion. The ion is molecular, so it's made up of more than one atom. The charge to mass ratio is 1:3, meaning the charge in ... | 163 |
https://www.ttcho.com/_files/ugd/988b76_ba0cb3177d05436da273a400a037ed01.pdf | 27 | [
"NO CHOICES AVAILABLE"
] | "2" | The true rate equation can be written as: rate = kB[OH][carbaryl], where kB = base-mediated hydrolysis rate constant. For the general rate equation: Rate = k[A][B][C]c. Overall order = a + b + c. What is the overall order of the reaction rate = kB[OH][carbaryl]? | <think>
Okay, so I have this chemistry problem here about reaction rates and the order of a reaction. Let me try to break it down step by step. I remember that the rate equation tells us how the rate of a reaction depends on the concentrations of the reactants. The general form given is Rate = k[A]^a[B]^b[C]^c, and the... | 114 |
https://www.cheminst.ca/wp-content/uploads/2022/12/Canadian-Chemistry-Olympiad-2022-EN_key.pdf | 10 | [
"\"free response\""
] | "The geometry is square pyramidal and the coordination number is 5." | For complex C, state its geometry and coordination number. | <think>
Okay, so I need to figure out the geometry and coordination number of a complex C. The user mentioned that for a complex C, they should state its geometry and coordination number. But they didn't provide any specific information about what ligands are involved or the oxidation state of the metal center. Hmm, th... | 122 |
http://chemistryrace.com/wp-content/uploads/2021/02/Chemistry_Race_2021_Questions_and_Solutions.pdf | 6 | [
"NO CHOICES AVAILABLE"
] | 7.258 g | Bismuth subsalicylate (C7H5BiO4) is a medication that can be used to treat multiple conditions of the digestive system, including heartburn and diarrhoea. It can be made by the hydrolysis of bismuth salicylate. One tablet of Pepto-Bismol contains 262 mg of bismuth subsalicylate. How many grams of bismuth metal are in a... | <think>
First, I identify the chemical formula of bismuth subsalicylate, which is C₇H₅BiO₄. From this formula, I can determine the molar mass of the compound by adding the atomic masses of each element present.
Next, I calculate the mass percentage of bismuth in bismuth subsalicylate. This involves dividing the atomic... | 146 |
https://www.ttcho.com/_files/ugd/988b76_e3d21fc42bb24de4959d7250f0cfcb3a.pdf | 20 | [
"\"A: H₂C CH₂\"",
"\"B: H₂C CH₂ CH₂\"",
"\"C: H₂C CH₂ OH OH\"",
"\"D: H₂C CH₂\""
] | B is the correct answer. | A simple example of the reaction of a diacid and a diamine is that involved in the formation of Nylon-6,6, a polyamide: Any diacid/diamine pair will be expected to react in a similar manner. What is the structure of the organic product that is formed? | <think>
Okay, so I'm trying to figure out the structure of the organic product formed when a diacid reacts with a diamine. The example given is Nylon-6,6, which I remember is a type of polyamide. I think polyamides are polymers formed by condensation reactions, where a diacid and a diamine react, releasing water or som... | 104 |
http://chemistryrace.com/wp-content/uploads/2023/02/chemistry_race_2023_answers-book.pdf | 30 | [
"NO CHOICES AVAILABLE"
] | 5.816 × 10-34 Js | A laser pulse was used to irradiate a silicon monocrystal, evaporating 3.5 × 10^17 silicon atoms (estimated by spectroscopic measurements). The laser beam has a wavelength of 200 nm and delivers 2 × 10^17 photons in a single short pulse. The enthalpy of evaporation of silicon is 300 kJ mol−1. Work out the value of the ... | <think>
Okay, so I've got this problem here about using a laser to evaporate silicon atoms and figuring out the Planck constant from the given data. Hmm, that sounds interesting. Let me break it down step by step to understand what's going on.
First, let's list out the given information:
- Number of silicon atoms eva... | 61 |
https://www.mit.edu/~anugrah/files/MockIChOSolutions.pdf | 6 | [
"\"free response\""
] | "η_NKT-19 = 447%, η_Ideal = 550%" | Compute the refrigerator efficiencies of the NKT-19 refrigerator and that of a maximally efficient heat pump refrigerator operating between 270 K and 330 K. The heat transfer is simply equal to 0.90 ΔΗ = 29.83 kJ. The work was found earlier to be 6.672 kJ. Thus, efficiency = 29.83/6.672. Ideal efficiency = 1/(1-TC/TH).... | <think>
Alright, so I have this problem about computing the efficiencies of two refrigerators: the NKT-19 refrigerator and an ideal one. The temperatures given are 270 K and 330 K. I need to find their efficiencies, and I have some data given—the heat transfer is 0.90 ΔΗ = 29.83 kJ, and the work was found earlier to be... | 46 |
https://www.mit.edu/~anugrah/files/MockIChOSolutions.pdf | 13 | [
"NO CHOICES AVAILABLE"
] | O=W=O with -0.5 for no lone pairs | Problem 3. Wolfram, 钨, вольфрамma التنغست. Draw the Lewis structure of tungstate (WO₄²⁻).
Draw the Lewis structure of tungstate (WO₄²⁻). | <think>
Okay, I need to draw the Lewis structure for tungstate, which is WO₄²⁻. Let me think through this step by step.
First, I remember that Lewis structures show the valence electrons of the atoms involved in a molecule or ion. Tungstate has tungsten (W) and oxygen (O) atoms, and it's a negatively charged ion with ... | 5 |
http://chemistryrace.com/wp-content/uploads/2023/02/chemistry_race_2023_answers-book.pdf | 37 | [
"NO CHOICES AVAILABLE"
] | 1.12% | Consider a quantitative synthetic pathway to make an L-polypeptide that is 100 amino acids long. The polypeptide should contain a glycine at the 1st, 10th, 23rd, and 58th place. If each step is performed without purification and diastereoisomer separation, what is the maximum allowed percentage of D-enantiomer contamin... | <think>
Okay, so I need to figure out the maximum allowed percentage of D-enantiomer contamination in the amino acids added at each step during the synthesis of a 100-amino acid L-polypeptide. The polypeptide has glycine at specific positions: 1st, 10th, 23rd, and 58th places. The synthesis is quantitative, meaning eac... | 66 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 42 | [
"\"free response\""
] | "free response answer" | Your task is to determine how many electrons the starting materials have to lose during the formation of one molecule of Mauveine A. (The answer is an integer). The oxidation reaction is represented by the equation: 2C6H7N + 2C7H9N → C26H23N4+ + 10e¯ + 9H+. Your task is to determine how many electrons the starting mate... | <think>
Alright, so I have this chemistry problem here about the formation of Mauveine A. The question is asking how many electrons the starting materials have to lose during the formation of one molecule of Mauveine A. The chemical equation provided is:
2C6H7N + 2C7H9N → C26H23N4+ + 10e¯ + 9H+
Hmm, okay. Let me thin... | 4 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 4 | [
"\"1. Valine\"",
"\"2. Leucine\"",
"\"3. Isoleucine\""
] | "Valine, Leucine, Isoleucine" | Here is the extracted text from the provided PDF:
BCAA is a group of amino acids containing a branched side chain. These amino acids are a popular dietary supplement for athletes. Although this group also includes some non-proteinogenic amino acids, most preparations for athletes contain only proteinogenic amino acids... | <think>
Okay, so I have to figure out three proteinogenic amino acids found in BCAA dietary supplements. I'm a bit new to this, so let me start by recalling what I know. BCAA stands for Branched-Chain Amino Acids. From the extract given, it says BCAA is a group of amino acids with branched side chains, and they're popu... | 156 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 3 | [
"NO CHOICES AVAILABLE"
] | valine, leucine, isoleucine | BCAA is a group of amino acids containing a branched side chain. These amino acids are a popular dietary supplement for athletes. Although this group also includes some non-proteinogenic amino acids, most preparations for athletes contain only proteinogenic amino acids. State three proteinogenic amino acids we should f... | <think>
Okay, so I need to figure out three proteinogenic amino acids that are commonly found in BCAA dietary supplements. I remember BCAA stands for Branched-Chain Amino Acids, which have a branched side chain. From what I've heard, these are popular among athletes, probably because they can help with muscle recovery ... | 213 |
https://www.ttcho.com/_files/ugd/988b76_e3d21fc42bb24de4959d7250f0cfcb3a.pdf | 9 | [
"\"A. Sea water and distilled water will have the same boiling point\"",
"\"B. Sea water will have a higher boiling point\"",
"\"C. Sea water will boil at < 100 °C\"",
"\"D. Sea water will have a higher freezing point\""
] | "B is the correct answer." | Sea water can be regarded as a solution of distilled water and dissolved salts and organic matter. Sea water can be regarded as impure distilled water. Impurities increase the boiling point of a pure substance, while the boiling point of pure water is 100 °C. Comparing distilled water to sea water: What will happen to ... | <think>
Okay, so I have this question about the boiling points of sea water and distilled water. I remember that purity of a substance affects its boiling and freezing points. The question says that sea water is like impure distilled water because it has dissolved salts and organic matter.
Hmm, I think impurities in ... | 200 |
http://chemistryrace.com/wp-content/uploads/2022/02/cambridge_chemistry_race_2022_answers.pdf | 36 | [
"NO CHOICES AVAILABLE"
] | 46.99% | Here's the text extraction from the provided PDF images, including formatting indications:
At 0°C and 1 atm, 1g of aluminium can generate: <highlighted>22.414 litre/mol×1g/26.98 g/mol×1.5 = 1.246 litre</highlighted>. 1g of magnesium can generate: <highlighted>22.414 litre/mol×1g/24.31 g/mol</highlighted> = 0.922 litre... | <think>
First, I need to solve the equation 1.246(2.56 - x) + 0.922x = 2.80 to find the value of x, which represents the mass of magnesium in the mixture.
Expanding the equation, I calculate:
1.246 * 2.56 = 3.191
1.246 * (-x) = -1.246x
So, the equation becomes 3.191 - 1.246x + 0.922x = 2.80.
Combining like terms:
-1.... | 206 |
https://www.ttcho.com/_files/ugd/988b76_e3d21fc42bb24de4959d7250f0cfcb3a.pdf | 13 | [
"\"A: Chlorine-35 and Chlorine-37\"",
"\"B: Na and Li\"",
"\"C: Red phosphorus and white phosphorus\"",
"\"D: Na and Mg\""
] | "C is the correct answer." | Allotropes are the different forms of the same element, in a given physical state. Which of the following pairs of substances are allotropes?
(A). Chlorine-35 and Chlorine-37
(B). Na and Li
(C). Red phosphorus and white phosphorus
(D). Na and Mg
| <think>
Okay, so I'm trying to figure out which of the given pairs are allotropes. Let me start by recalling what allotropes are. From what I remember, allotropes are different structural forms of the same element in the same physical state. So, for example, graphite and diamond are allotropes of carbon because they're... | 228 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 62 | [
"\"free response\""
] | "free response answer" | Propellane is a highly strained hydrocarbon which is interesting in many ways, one of which being its potential use for introduction of bicyclopentane (BCP) motif into drug-like compounds, where the BCP can act as a bioisostere of para substituted benzene ring. What is the unique feature of the hydrocarbon propellane t... | <think>
Okay, so I need to figure out the unique feature of propellane that makes it useful for introducing the bicyclopentane motif into drug-like compounds. I've heard that propellane is a highly strained hydrocarbon, which probably means it has a lot of ring strain because of its structure. I'm not super familiar wi... | 194 |
https://www.ttcho.com/_files/ugd/988b76_ba0cb3177d05436da273a400a037ed01.pdf | 16 | [
"\"Dilute HNO3 or NaNO3 / dil. H2SO4\"",
"\"Sn / conc. HCl or NaBH4 or any suitable reducing agent\"",
"\"Acetic anhydride or acetyl chloride\""
] | "Dilute HNO3 or NaNO3 / dil. H2SO4, Sn / conc. HCl or NaBH4 or any suitable reducing agent, Acetic anhydride or acetyl chloride" | Here's the text extraction from the provided images, including formatting indications:
4. Pain relieving medications are an indispensable feature of modern society, and are diverse in their structure and origin. Some, such as acetylsalicylic acid (commonly known as Aspirin), are derivatives of naturally occurring comp... | <think>
Alright, so I need to figure out the missing reagents or reactants in the synthesis scheme for Paracetamol. I remember that Paracetamol, also known as acetaminophen, is a common pain reliever. The synthesis pathway provided has a few steps, and I need to identify what's missing in each step.
First, the scheme ... | 157 |
http://chemistryrace.com/wp-content/uploads/2024/02/ChR_2024_answer_booklet.pdf | 11 | [
"NO CHOICES AVAILABLE"
] | 1.996 megatons | Here's the extracted text from the provided PDF pages, with formatting indications:
**Page 1**
* <bold>Chemistry Race 2024: Questions and Solutions</bold>
* <bold>Question C.2 (Jiří Ledvinka)</bold>
* Almost every portable electronic device today gets its power from lithium-ion batteries. Manufacturing of t... | <think>
To determine how many megatons of lithium carbonate could be produced from the lithium ore deposit under the Czech mountain Cínovec, I need to follow a series of steps.
First, I'll calculate the total mass of lithium in the ore. The deposit has a mass of 134 million tons and a lithium content of 0.28% by weigh... | 181 |
http://chemistryrace.com/wp-content/uploads/2024/02/ChR_2024_answer_booklet.pdf | 8 | [
"NO CHOICES AVAILABLE"
] | 3Fe(II):4Fe(III) | Here's the text extraction with formatting:
**Page 1**
**Chemistry Race 2024: Questions and Solutions**
**Question B.3 (Sam Holmes)**
**Technical drawings are often called blueprints owing to their distinctive colour. An early method for creating these intricately detailed diagrams involved the reaction of iron(... | <think>
Okay, so I need to find the ratio of Fe(II) to Fe(III) in Prussian blue, which is Fe7(CN)18. The question tells me that Prussian blue contains iron only in +II and +III oxidation states.
First, I'll think about what Fe7(CN)18 means. Each Fe is either Fe(II) or Fe(III). The compound has a total of 7 Fe atoms. ... | 208 |
https://www.ttcho.com/_files/ugd/988b76_e3d21fc42bb24de4959d7250f0cfcb3a.pdf | 4 | [
"\"A. Ionic\"",
"\"B. Macromolecular\"",
"\"C. Metallic\"",
"\"D. Simple covalent\""
] | "B is the correct answer." | Diamond is a covalent substance, but is the hardest naturally occurring substance. This is not representative of a substance with a simple covalent framework. Diamond does not conduct electricity in any state, nor does it dissolve in water. This is not representative of an ionic or metallic structure. Diamond is best ... | <think>
Okay, so I need to figure out what type of structure diamond has based on the given information. Let me start by reading through the problem carefully.
Diamond is described as a covalent substance and it's the hardest naturally occurring substance. That's interesting because I thought maybe being hard would me... | 178 |
http://chemistryrace.com/wp-content/uploads/2023/02/chemistry_race_2023_answers-book.pdf | 3 | [
"NO CHOICES AVAILABLE"
] | Rhenium (Re) | First characterised in 1908 by Japanese chemist Masataka Ogawa, he assigned it to the then-undiscovered element 43. However, an investigation in 1996 concluded that Ogawa's assignment was incorrect. In fact, unbeknownst to him, what Ogawa had found was not element 43, but another element which was also undiscovered at ... | <think>
Okay, so I have this question about identifying an element that Masataka Ogawa assigned as Np (nipponium) back in 1908. But it turns out he was wrong, and it was actually another undiscovered element at the time. I need to figure out which element it was based on the given electronic configuration.
The electro... | 158 |
http://chemistryrace.com/wp-content/uploads/2022/02/cambridge_chemistry_race_2022_answers.pdf | 36 | [
"NO CHOICES AVAILABLE"
] | 0.8 μM | Benzaldehyde (C₆H₅CHO) is the simplest aromatic aldehyde. It is a colourless liquid, with a characteristic pleasant almond odour — it is indeed found in almond extracts and may be isolated from many natural feedstocks, e.g. from almonds or from apricot, cherry, or peach seeds. The following scheme describes a hydration... | <think>
Okay, so I've got this chemistry problem here about benzaldehyde and its hydrate. Hmm, benzaldehyde is C₆H₅CHO, right? I remember it smells like almonds, which is why almond extracts often have it. The problem says it's a colorless liquid and mentions it's found in various natural sources like almonds, apricot,... | 223 |
https://www.ttcho.com/_files/ugd/988b76_01ceeff230b24cbbb0125b2bfa3f3475.pdf | 36 | [
"(A). KCl",
"(B). FeCl₂",
"(C). KI",
"(D). FeCl₃"
] | A is the correct answer | A forms a colourless solution when dissolved in water. Treating this solution with acidified silver nitrate followed by dilute ammonia results in a colourless solution once more. A is identified as a compound that will form a precipitate with silver ions but will dissolve in ammonia. What is the identity of A?
(A). KCl... | <think>
Okay, so I'm looking at this chemistry problem and trying to figure out the correct answer. Let me break it down step by step.
The question says that compound A forms a colourless solution when dissolved in water. Then, when treated with acidified silver nitrate, followed by dilute ammonia, the solution become... | 176 |
https://www.mit.edu/~anugrah/files/MockIChOSolutions.pdf | 22 | [
"\"free response\""
] | "K-H + OH⁻ = K⁻ (enolate) + H₂O; K⁻ + Cl₂ → K-Cl + Cl-" | K-H + OH⁻ = K⁻ (enolate) + H₂O
K⁻ + Cl₂ → K-Cl + Cl⁻
Note that the step involving Cl₂ is rate limiting. Write the mechanism for the reaction involving K-H and Cl₂, noting that the step involving Cl₂ is rate limiting. | <think>
Okay, so I have this problem where I need to write the mechanism for a reaction involving K-H and Cl₂, and it's noted that the step with Cl₂ is the rate-limiting step. Hmm, let me try to figure this out.
First, looking at the given equations. There are two reactions provided:
1. K-H + OH⁻ → K⁻ (enolate) + H₂O... | 172 |
http://chemistryrace.com/wp-content/uploads/2021/02/Chemistry_Race_2021_Questions_and_Solutions.pdf | 2 | [
"NO CHOICES AVAILABLE"
] | 0.8 ml h-1 | We want to provide a patient with an intravenous treatment of a calming medication. We prepare 50 ml of an infusion with the contents of 10 two-millilitre ampoules, where each ampoule contains 100 mg of the medicine. The remaining volume is made up with physiological solution. We want to administer the infusion at the ... | <think>
Okay, so I have this problem about a medical infusion, and I need to figure out the correct flow rate if the nurse forgot to dilute the medicine. Hmm, let me try to understand what's going on here.
First, the setup: They prepared 50 ml of infusion using 10 two-millilitre ampoules. Each ampoule has 100 mg of th... | 222 |
https://www.ttcho.com/_files/ugd/988b76_e3d21fc42bb24de4959d7250f0cfcb3a.pdf | 33 | [
"\"A: CaCl and H2O\"",
"\"B: Ca(OH)2 and Cl2\"",
"\"C: CaH and Cl2\"",
"\"D: CaCl2 and H2O\""
] | "D: CaCl2 and H2O" | A metallic oxide will react with an acid to yield a salt and water. The specific reaction occurring here is: CaO (s) + 2HCl (aq) -> CaCl2 (aq) + H2O (l).
CaO (s) and HCl (aq) will react to give: (a) CaCl and H2O? (b) Ca(OH)2 and Cl2? (c) CaH and Cl2? (d) CaCl2 and H2O? | <think>
Okay, so I've got this chemistry problem here about the reaction between calcium oxide and hydrochloric acid. Hmm, let me try to figure this out step by step. I remember from my classes that metallic oxides reacting with acids usually produce a salt and water. That seems familiar, like a common acid-base reacti... | 220 |
https://www.mit.edu/~anugrah/files/MockIChOSolutions.pdf | 4 | [
"NO CHOICES AVAILABLE"
] | Wdone = 2.020 kJ, qads = 29.83 kJ | The piston then expands isothermally and reversibly until all the liquid is vaporized, removing heat from the refrigerator. How much work is done by the expanding gas, and how much heat is absorbed? | <think>
Okay, so I have this problem where a piston does some expanding isothermally and reversibly, and this process vaporizes all the liquid, which is part of a refrigerator. The question is asking how much work is done by the expanding gas and how much heat is absorbed.
Alright, let's start by recalling what an iso... | 97 |
http://chemistryrace.com/wp-content/uploads/2021/02/Chemistry_Race_2021_Questions_and_Solutions.pdf | 7 | [
"\"+III\"",
"\"+IV\"",
"\"+V\"",
"\"+VI\""
] | +V | Krypton difluoride, KrF2, is the strongest known oxidant and therefore has many interesting chemical properties. For example, it is capable of oxidizing metallic gold to its highest known oxidation state. The reaction is described by the following equation:
7 KrF2(g) + 2 Au(s) → 2 [KrF]+[AuF6]⁻ (s) + 5 Kr (g)
Determi... | <think>
Okay, so I have this chemistry problem here about gold being oxidized by krypton difluoride. The reaction is given as:
7 KrF2(g) + 2 Au(s) → 2 [KrF]+[AuF6]⁻ (s) + 5 Kr (g)
And the question is asking for the highest known oxidation state of gold, specifically in this reaction. Hmm, I think for this, I need to ... | 189 |
http://chemistryrace.com/wp-content/uploads/2024/02/ChR_2024_answer_booklet.pdf | 5 | [
"\"free response\""
] | "1960000 kg of bananas" | A kilogram of bananas produces on average 2.6 microliters of ethylene per hour at a temperature of 15°C. If Vlado wants to get a kilogram of ethylene per week, he needs to buy a certain amount of bananas, ignoring the respiration of bananas and other disturbing phenomena. How many kilograms of bananas does Vlado need t... | <think>
Okay, so Vlado wants to get one kilogram of ethylene per week, and he needs to figure out how many kilograms of bananas he should buy. The problem says that one kilogram of bananas produces 2.6 microliters of ethylene per hour at 15°C. Hmm, let me think about how to approach this.
First, let's make sure I unde... | 72 |
https://facultystaff.richmond.edu/~lrunyenj/bio201/04bio201%20exam%201%20key.pdf | 2 | [
"\"free response\""
] | "4" | Imagine an individual with the genotype AaDdgg, where each of these genes is on a different chromosome. a. How many different gametes types can be formed by this individual? | <think>
Okay, so I have this genetics problem here where an individual has the genotype AaDdgg, and each of these genes is on a different chromosome. The question is asking how many different gamete types can be formed by this individual. Hmm, let me try to figure this out step by step.
First, I remember that when dea... | 209 |
http://chemistryrace.com/wp-content/uploads/2024/02/ChR_2024_answer_booklet.pdf | 4 | [
"(c) 1 H + H → He + on"
] | (c) 1 H + H → He + on | Nuclear fusion is a process which creates energy by combining atomic nuclei. This process is only exergonic at lighter elements (the delimiter is at the nuclide Fe). The biggest energy gain occurs when hydrogen atoms are fused and form helium. Such processes are also the main source of energy in nuclei of stars such as... | <think>
Okay, so I'm trying to figure out the equation for nuclear fusion. I know that fusion is when atomic nuclei combine to form a heavier nucleus, and this process releases a lot of energy. I've heard that this is how stars like our Sun generate their energy, fusing hydrogen into helium.
First, I should remember ... | 196 |
http://chemistryrace.com/wp-content/uploads/2021/02/Chemistry_Race_2021_Questions_and_Solutions.pdf | 46 | [
"\"free response\""
] | "13.4%" | Plasmodium falciparum is a protozoan parasite which causes malaria in humans. Currently, 220 million people are infected worldwide, with almost half a million deaths per year. In 2002, the entire genome of P. falciparum was sequenced. It contains 7406 introns with an average length of 178.7 base pairs. Elemental analys... | <think>
Okay, so I'm trying to figure out the molar fraction of G-C base pairs in the introns of Plasmodium falciparum. Hmm, the problem gives me some specific data: the genome has 7406 introns, each with an average length of 178.7 base pairs. There's also an elemental analysis showing a nitrogen content of 15.11% by w... | 203 |
https://chemistryrace.soc.srcf.net/wp-content/uploads/2020/02/Chemistry_Race_2020_Questions_and_Solutions.pdf | 13 | [
"NO CHOICES AVAILABLE"
] | 12 AsS + 3O2 → 4 AS2S3 + 2 AS2O3 | Realgar, stoichiometrically denoted as AsS, forms beautiful crimson crystals, hence it is sometimes called "ruby sulfur". Its colour, however, fades after exposure to sunlight and oxygen, as the mineral turns into white arsenic (diarsenic trioxide) and yellow orpiment (diarsenic trisulfide). Write the balanced chemical... | <think>
Okay, so I have this chemistry problem to solve. It involves balancing a chemical equation for the transformation of realgar (AsS) into white arsenic (diarsenic trioxide) and yellow orpiment (diarsenic trisulfide). Hmm, sounds a bit complex, but let's break it down step by step.
First, I need to understand the... | 219 |
https://www.ttcho.com/_files/ugd/988b76_e3d21fc42bb24de4959d7250f0cfcb3a.pdf | 26 | [
"\"A: Na\"",
"\"B: Br\"",
"\"C: Cl\"",
"\"D: Pb2+\""
] | D: Pb2+ | KI (aq) is added to a solution of an unknown salt, and a yellow precipitate is formed. Which of the following ions is most likely present?
(A). Na
(B). Br
(C). Cl
(D). Pb2+ | <think>
Okay, so I've got this chemistry problem here. It says that when KI, which is potassium iodide, is added to a solution of an unknown salt, a yellow precipitate forms. The question is asking which ion is most likely present in the solution. The options are Na, Br, Cl, or Pb²+.
Alright, let me think. First, pota... | 227 |
https://www.mit.edu/~anugrah/files/MockIChOSolutions.pdf | 17 | [
"\"free response\""
] | "Ñ(O-D, DOAc) = 2037.3 cm¯¹, Ñ(O-D, D3O+) = 2182.8 cm¯¹" | * <bold>3. Calculate the stretching frequency of the O-D bond in DOAc and D3O⁺, respectively.</bold>
* <bold>✓ is proportional to sqrt(1/mu), and we may assume force constants don't change with isotopic substitution.</bold>
* <bold>Ñ(O-D, DOAc) = ỹ(O-H, HOAc)*sqrt(.94118/1.7778) = 2037.3 cm¯¹</bold>
* <bold>Ñ(O... | <think>
Alright, so I've got this problem here where I need to calculate the stretching frequency of the O-D bond in two different molecules: DOAc and D3O⁺. The problem also gives me some useful information and equations, so I need to make sense of all that. Let me try to break it down step by step.
First off, I know ... | 86 |
http://chemistryrace.com/wp-content/uploads/2023/02/chemistry_race_2023_answers-book.pdf | 6 | [
"\"Cyclopropane\"",
"\"Propene\""
] | "Cyclopropane and propene" | For any given molecular formula, there are usually many possible structural formulas. Molecules with the same molecular formula but different arrangements of atoms can be constitutional isomers or stereoisomers. These molecules can have very different properties, so it is important that we can distinguish them. Draw th... | <think>
Okay, so I have to figure out the stable isomers for the molecular formula C3H6. Hmm, I remember that isomers have the same molecular formula but different structural formulas. They can be constitutional (also called structural) isomers or stereoisomers. Since the question mentions stable isomers, I think it's ... | 212 |
http://chemistryrace.com/wp-content/uploads/2022/02/cambridge_chemistry_race_2022_answers.pdf | 8 | [
"\"free response\""
] | "13 whole days" | Chemistry enthusiast Ann decided to battle the world-wide, corporate-driven short-age of AdBlue additive by her wits. She knows that the commercial name ‘AdBlue' hides a plain aqueous solution of urea with a mass concentration of 32.5% and a density of 1088 kg m-3. Her idea is to obtain the suddenly-all-so-expensive so... | <think>
Okay, so I have this problem where Ann wants to make AdBlue from her urine. Hmm, AdBlue is an aqueous urea solution, right? It's usually 32.5% by mass and has a density of 1088 kg/m³. She wants to make it herself because it's suddenly expensive.
First, she needs to figure out how much AdBlue she needs for her ... | 192 |
http://chemistryrace.com/wp-content/uploads/2021/02/Chemistry_Race_2021_Questions_and_Solutions.pdf | 17 | [
"NO CHOICES AVAILABLE"
] | 95.12 mass percent. | A snail shell weighing 27.7 g was dissolved in hydrochloric acid. The reaction yielded 6440 ml of CO2. The experiment was carried out at 25 °C and 1 atm. Determine the mass percentage of CaCO3 in the shell. | <think>
Okay, so I have this problem where a snail shell weighing 27.7 grams is dissolved in hydrochloric acid, and it produces 6440 ml of CO2. The experiment was done at 25 degrees Celsius and 1 atmosphere of pressure. I need to find the mass percentage of calcium carbonate (CaCO3) in the shell.
Hmm, let me start by ... | 198 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 22 | [
"NO CHOICES AVAILABLE"
] | 3470 t | At the beginning of September 2024, there were complications in local transport in Lower Saxony as the hydrogen trains, newly introduced in line with Energiewende, ran out of hydrogen. The supplier promised to remedy the situation within a week. In order to prevent an ADAC-initiated Gerexit, the local government sought... | <think>
Okay, so Angela Merkel needs to figure out how many tonnes of zinc are required to produce enough hydrogen for 14 iLint trains each week. Let me break this down step by step.
First, I need to find out how much hydrogen each train uses in a week. The problem says each unit has a 1800 kg hydrogen tank, and the ... | 210 |
http://chemistryrace.com/wp-content/uploads/2022/02/cambridge_chemistry_race_2022_answers.pdf | 26 | [
"\"free response\""
] | "free response answer" | It is a known fact that hydrogen is the most abundant element in interstellar space. But what is the most abundant ion in interstellar space? It is a molecular ion with a charge to mass ratio of 1:3 and two electrons in total. (The charge is in units of elementary charge and the mass in atomic mass units.) Give the for... | <think>
Alright, so I need to figure out the most abundant ion in interstellar space. I know that hydrogen is the most abundant element, but ions can be a bit trickier. Let me break down the problem step by step.
First, the problem says it's a molecular ion, which means it's made up of more than one atom. It has a cha... | 205 |
https://www.ttcho.com/_files/ugd/988b76_e3d21fc42bb24de4959d7250f0cfcb3a.pdf | 26 | [
"\"A: A white precipitate is formed\"",
"\"B: A colourless solution is formed\"",
"\"C: A yellow precipitate is formed\"",
"\"D: A yellow solution is formed\""
] | A: A white precipitate is formed | AgNO3 (aq) + Co²+2Cl (aq) can undergo an ion exchange when mixed. All common nitrates are soluble in water, and AgCl is known to form as a white solid. What would be observed when AgNO3 (aq) is mixed with CoCl2 (aq)?
(A). A white precipitate is formed
(B). A colourless solution is formed
(C). A yellow precipitate i... | <think>
Alright, so I'm trying to figure out what happens when silver nitrate (AgNO3) is mixed with cobalt(II) chloride (CoCl2). I remember that when two aqueous solutions are mixed, an ion exchange can occur, which might lead to a precipitation reaction if one of the products is insoluble. Let me break this down step ... | 226 |
http://chemistryrace.com/wp-content/uploads/2022/02/cambridge_chemistry_race_2022_answers.pdf | 39 | [
"\"free response\""
] | "10%" | Flame retardants are compounds added to plastic products to decrease their flammability. Commonly used primary flame retardants are polybrominated aromatic compounds which release bromine radicals on thermal decomposition. These radicals then suppress the highly exothermic reactions of other organic radicals with oxyge... | <think>
Okay, so I need to figure out the necessary mass percentage of Sb₂O₃ to add to a plastic product that already contains 20 mass percent of a brominated flame retardant, C₁₄Br₁₀H₄. The goal is to achieve a stoichiometric reaction between Sb₂O₃ and the brominated compound.
First, let me write down the chemical e... | 141 |
https://www.ttcho.com/_files/ugd/988b76_ba0cb3177d05436da273a400a037ed01.pdf | 27 | [
"NO CHOICES AVAILABLE"
] | "278 nm" | Here is the extracted text with additional context:
From Figure 1, calculate the wavelength (λ) at which maximum absorbance of carbaryl occurs. As an example, 1-naphthoxide has a λmax = 333 nm. Identify the point on the x-axis that corresponds to the position of maximum absorbance of carbaryl: 2.1 cm to 2.2 cm. Ident... | <think>
First, I need to determine the wavelength corresponding to the maximum absorbance of carbaryl using the provided data. The point of maximum absorbance is between 2.1 cm and 2.2 cm on the x-axis, and the scale is determined by the point between 3.8 cm and 3.9 cm, which corresponds to 50 nm.
I'll calculate the n... | 266 |
https://chemistryrace.soc.srcf.net/wp-content/uploads/2020/02/Chemistry_Race_2020_Questions_and_Solutions.pdf | 20 | [
"NO CHOICES AVAILABLE"
] | CN6 C + 3N2 | Diazotetrazole is a very unstable molecule. This was confirmed by Thiele, who was the first person to synthesize this compound by diazotization of 5-aminotetrazole. However, he was not able to isolate it, as it instantly exploded in solution at 0 °C. Write a balanced chemical equation to describe what Thiele observed r... | <think>
Okay, so I need to write a balanced chemical equation for the decomposition of diazotetrazole. Diazotetrazole is known to be very unstable, so when Thiele synthesized it, it instantly exploded at 0°C. My goal is to figure out the products formed during this explosion and then balance the equation.
First, I sho... | 152 |
http://chemistryrace.com/wp-content/uploads/2025/02/ChR_2025_answer_booklet.pdf | 27 | [
"\"free response\""
] | "97.32%" | At the kaolin clay plant, the leak tightness of the filtering equipment for capturing impurities is tested on Monday morning before the line starts up. From the previous test, 180 litres of kaolin suspension with a density of 1.025 g cm-3 and a kaolin mass fraction of 0.053 remained in the storage tank. To this, 50l of... | <think>
Okay, so I have this problem about kaolin clay and filtration efficiency. Hmm. Let me try to parse this step by step. I need to find the filtration efficiency, which is the fraction of solids captured by the cloth. That means I need to figure out how much kaolin was in the original suspension, how much was adde... | 103 |
http://chemistryrace.com/wp-content/uploads/2023/02/chemistry_race_2023_answers-book.pdf | 24 | [
"NO CHOICES AVAILABLE"
] | £2.62 billion | I wish to fill the local pond with 3500m³ of water with a density of 1.08 g ml¯¹, which is to be made by mixing H₂O and D₂O. I buy deuterium oxide from a well-known chemical company for £1000l-1. Assume that H2O is free. Density of H2O, ρH₂O = 0.997 g ml-1. How much will it cost to fill the pond with 3500m³ of water wi... | <think>
Okay, so I need to figure out how much it will cost to fill a pond with 3500 cubic meters of water that has a density of 1.08 grams per milliliter. The water is going to be a mixture of regular H₂O and D₂O, which is deuterium oxide or heavy water. The D₂O costs £1000 per liter, and regular water is free.
Firs... | 40 |
http://chemistryrace.com/wp-content/uploads/2023/02/chemistry_race_2023_answers-book.pdf | 36 | [
"NO CHOICES AVAILABLE"
] | 1.12% | Consider a quantitative synthetic pathway to make an L-polypeptide that is 100 amino acids long. The polypeptide should contain a glycine at the 1st, 10th, 23rd and 58th place. If each step is performed without purification and diastereoisomer separation, what is the maximum allowed percentage of D-enantiomer ‘contamin... | <think>
Okay, so I have this problem about making an L-polypeptide that's 100 amino acids long. It needs to have glycine at specific positions: 1st, 10th, 23rd, and 58th. Each step is performed without purification, and they don't separate diastereoisomers. I need to find the maximum percentage of D-enantiomer contamin... | 120 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.