07/30/2026 18:17:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=187593, gen1=34032, gen2=920, LatencyMode=Interactive, FreeMemory=5792792576, Live=305526720, HeapSizeBytes=305379560, FragmentedBytes=1007224, TotalCommittedBytes=306954240, PinnedObjectsCount=1, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/30/2026 18:17:36 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 9078078322488 (from now=9077958322488, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 18:17:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1024691 ~ 5.99 samples/sec, 99 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:18:15 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 07/30/2026 18:18:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0796330 ~ 6.08 samples/sec, 99 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:19:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0978522 ~ 6.01 samples/sec, 99 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:20:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0846750 ~ 6.07 samples/sec, 99 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:21:26 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 18:21:26 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 18:22:15 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/30/2026 18:22:15 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/30/2026 18:22:15 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 18:22:15 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/30/2026 18:22:15 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 18:22:15 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/30/2026 18:22:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0722374 ~ 6.08 samples/sec, 100 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:23:26 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0795413 ~ 6.08 samples/sec, 100 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:24:27 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0678662 ~ 6.08 samples/sec, 100 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:25:03 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 18:25:03 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 18:26:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0854390 ~ 6.07 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:27:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0882087 ~ 6.07 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:28:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0820337 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:29:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0710838 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:30:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0901488 ~ 6.07 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:31:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0918092 ~ 6.07 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:32:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0791659 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:32:34 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] 07/30/2026 18:33:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0780335 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:34:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0781295 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:35:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0942458 ~ 6.07 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:36:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0713573 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:37:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0733934 ~ 5.96 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:38:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0870327 ~ 6.07 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:39:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0773519 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:40:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0922224 ~ 6.07 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:41:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0816129 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:42:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0708553 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:43:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0774782 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:44:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0828746 ~ 6.07 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:45:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0760924 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:46:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0796484 ~ 6.08 samples/sec, 101 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:46:46 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 18:46:46 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 18:47:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0824434 ~ 6.07 samples/sec, 102 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:48:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0898115 ~ 6.06 samples/sec, 102 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:49:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0726607 ~ 6.08 samples/sec, 102 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:50:47 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0813232 ~ 6.08 samples/sec, 102 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:51:41 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 18:51:41 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 18:51:48 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 18:51:48 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 18:51:49 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 18:51:50 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 18:52:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0910373 ~ 6.07 samples/sec, 105 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:53:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0712329 ~ 6.08 samples/sec, 105 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:54:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0848020 ~ 6.07 samples/sec, 105 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:55:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0744524 ~ 6.03 samples/sec, 105 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:56:48 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 18:56:48 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 18:57:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0687012 ~ 6.03 samples/sec, 106 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:58:48 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0723033 ~ 6.08 samples/sec, 106 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 18:59:20 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 18:59:20 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 19:00:00 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 19:00:00 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 19:01:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0853925 ~ 6.07 samples/sec, 108 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:02:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0823321 ~ 6.01 samples/sec, 108 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:02:42 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 19:02:42 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 19:02:49 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 19:02:49 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 19:03:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0773176 ~ 6.08 samples/sec, 110 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:04:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0929245 ~ 6.07 samples/sec, 110 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:05:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0671299 ~ 6.08 samples/sec, 110 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:06:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0846234 ~ 6.07 samples/sec, 110 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:07:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0716444 ~ 6.06 samples/sec, 110 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:08:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0747641 ~ 6.03 samples/sec, 110 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:08:52 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 19:08:52 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 19:08:52 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:08:57 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:08:59 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:08:59 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:09:01 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:09:06 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:09:20 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:00.4531863 (0.4531863). Stats=NestingStats { ZMax = 56.29999923706055, ChamberVolume = 1248494.125, SinteredVolume = 203753.6015625, Density = 0.16319948767279943 } [ExhaustiveNester.cs@1820] 07/30/2026 19:09:20 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:19.1704714 [CurrentJobAutomatic.razor.cs@103] 07/30/2026 19:09:20 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":31.3,"ChamberVolume":694100.688,"SinteredVolume":100865.145,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:09:43 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:09:43 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:09:43 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:09:44 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:09:44 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:09:44 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:09:49 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:09:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0439667 ~ 5.98 samples/sec, 111 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:10:02 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:07 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:19 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:19 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:23 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:24 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:24 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:24 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:24 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:25 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job (will delay), changes detected. Job={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:26 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:00.9628518 (0.9628518). Stats=NestingStats { ZMax = 40.900001525878906, ChamberVolume = 906987.8125, SinteredVolume = 175696.8046875, Density = 0.19371462578225107 } [ExhaustiveNester.cs@1820] 07/30/2026 19:10:26 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:01.3569614 [CurrentJobAutomatic.razor.cs@103] 07/30/2026 19:10:27 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":175696.805,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D638 and D790 and Benchy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":56.3,"ChamberVolume":1248494.125,"SinteredVolume":203753.602,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:37 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:00.9588462 (0.9588462). Stats=NestingStats { ZMax = 40.900001525878906, ChamberVolume = 906987.8125, SinteredVolume = 175696.8046875, Density = 0.19371462578225107 } [ExhaustiveNester.cs@1820] 07/30/2026 19:10:37 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:01.3673126 [CurrentJobAutomatic.razor.cs@103] 07/30/2026 19:10:38 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":175696.805,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"fd474f3e-e988-44c5-b548-8feaf394f0fa","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":175696.805,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:10:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0954356 ~ 5.96 samples/sec, 111 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:11:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0770972 ~ 6.08 samples/sec, 111 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:12:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0680908 ~ 6.08 samples/sec, 111 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:13:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0752420 ~ 6.06 samples/sec, 111 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:14:28 WARN [SLS4All.Compact.ComponentModel.PrinterLifetime] [0] Performing ShutdownSystem as requested! [PrinterLifetime.cs@106] 07/30/2026 19:14:28 INFO [Microsoft.Hosting.Lifetime] [0] Application is shutting down... 07/30/2026 19:14:28 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Exiting, trying to disable WatchDog [PrinterWatchDogMonitor.cs@165] 07/30/2026 19:14:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1166984 ~ 6.02 samples/sec, 111 resets, 172 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:14:58 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin stopped 07/30/2026 19:14:58 INFO [SLS4All.Compact.Movement.McuMovementClient] [0] Saving movement state [MovementClientBase.cs@207] 07/30/2026 19:14:58 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Movement.MovementClientBaseSavedOptions.json [AppDataOptionsWriter.cs@86] 07/30/2026 19:14:58 DBUG [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 19:14:58 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Cancelled read loop [Mlx90640Camera.cs@326] 07/30/2026 19:14:58 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 has ended Run() [McuManager.cs@331] 07/30/2026 19:14:58 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu has ended Run() [McuManager.cs@331] 07/30/2026 19:14:58 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host has ended Run() [McuManager.cs@331] 07/30/2026 19:14:58 INFO [SLS4All.Compact.McuClient.McuManager] [0] All MCUs finished running 07/30/2026 19:14:58 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU manager finished running [McuPrinterClient.cs@231] 07/30/2026 19:14:58 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU runner SLS4All.Compact.Printer.PipedMcuProxyRunner[1] has been cancelled [McuPrinterClient.cs@170] 07/30/2026 19:14:58 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 19:14:58 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU manager reset [McuPrinterClient.cs@242] 07/30/2026 19:14:58 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] MCU runner SLS4All.Compact.Printer.McuHostRunner[0] has been cancelled [McuPrinterClient.cs@170] 07/30/2026 19:15:05 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] 07/30/2026 19:15:05 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] 07/30/2026 19:15:05 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] 07/30/2026 19:15:05 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 07/30/2026 18:15:05 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] 07/30/2026 19:15:06 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/30/2026 19:15:06 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] 07/30/2026 19:15:06 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] 07/30/2026 19:15:06 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] 07/30/2026 19:15:06 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] 07/30/2026 19:15:06 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] 07/30/2026 19:15:06 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] 07/30/2026 19:15:06 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] 07/30/2026 19:15:06 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] 07/30/2026 19:15:06 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] 07/30/2026 19:15:06 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] 07/30/2026 19:15:06 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=4b5995d8-a1d3-45bf-a096-35debb831a0f) 07/30/2026 19:15:06 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... Waiting for exit signal... Successfully set permissions. 07/30/2026 19:15:06 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] 07/30/2026 19:15:06 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] 07/30/2026 19:15:06 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] 07/30/2026 19:15:06 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] 07/30/2026 19:15:06 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] 07/30/2026 19:15:06 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] 07/30/2026 19:15:06 INFO [Inova.ApiPlugin.FullRecoatLayerClient] [0] FullRecoatLayerClient installed as ILayerClient (full-recoat expansion available) 07/30/2026 19:15:06 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ 07/30/2026 19:15:06 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 19:15:07 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] 07/30/2026 19:15:07 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 19:15:07 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 19:15:07 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] 07/30/2026 19:15:07 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] 07/30/2026 19:15:08 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] 07/30/2026 19:15:09 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 07/30/2026 19:15:09 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. 07/30/2026 19:15:09 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 07/30/2026 19:15:09 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current 07/30/2026 19:15:09 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] 07/30/2026 19:15:09 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: /home/ppak/SLS4All/Current/appsettings.toml /home/ppak/SLS4All/Current/appsettings.Inova.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml /home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] 07/30/2026 19:15:12 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/7a39068e-0d0b-4bfd-bbe0-0dea3c6f677c.sh [SystemPrinterHostname.cs@140] 07/30/2026 19:15:12 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] 07/30/2026 19:15:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] 07/30/2026 19:15:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] 07/30/2026 19:15:14 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNNECPUV9VK1, RemoteIpAddress = 127.0.0.1, RemotePort = 38472, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1916uw97C9ra6RooS5n2e4tGL7lhJhcRTQxwxfkgUBgOsrxSRYUgs7srIya8z_5V3p4Lrz1ML6DF0antdEu3WjKNsYb3oIY6BXIg30dreaPVg6XiuAKqvYj17EOLpIzEeMFrFInVepSRihFEe19_XXVT6SZZhEKdn1hUly_fZZCKzMtZOu2dAC-ipzlPOXCOU3AKFCrzgSjt5KThPNM3RNvB1gbge7TRq99L2qQ_MOzl27YcSa98NFuXhGXQHl3QUsjsKgQwXqY6PILy6LkU6KVX8NZjNNOugp4E_ApR8FaIig_aWVVhHXiVa_qphVYcRyJzmThZOSudend3yy-8OKKHk93apGIdLh_66Q3J_1kNxHwrOnBsEu_vAuuI6vwIvKFE3DeP0qROgAjHP8mc3e0m3iwhKlIR2z3iHMj8Zq7h-lF4cOjrrNHUk55tVAAyEsfIniayLHDbdO1DLQ2eib9Z8U5b2jxdJq8DtdX4oKgMJQ0kVY9ZW64GPJEMVIv8U]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1916uw97C9ra6RooS5n2e4tGL7lhJhcRTQxwxfkgUBgOsrxSRYUgs7srIya8z_5V3p4Lrz1ML6DF0antdEu3WjKNsYb3oIY6BXIg30dreaPVg6XiuAKqvYj17EOLpIzEeMFrFInVepSRihFEe19_XXVT6SZZhEKdn1hUly_fZZCKzMtZOu2dAC-ipzlPOXCOU3AKFCrzgSjt5KThPNM3RNvB1gbge7TRq99L2qQ_MOzl27YcSa98NFuXhGXQHl3QUsjsKgQwXqY6PILy6LkU6KVX8NZjNNOugp4E_ApR8FaIig_aWVVhHXiVa_qphVYcRyJzmThZOSudend3yy-8OKKHk93apGIdLh_66Q3J_1kNxHwrOnBsEu_vAuuI6vwIvKFE3DeP0qROgAjHP8mc3e0m3iwhKlIR2z3iHMj8Zq7h-lF4cOjrrNHUk55tVAAyEsfIniayLHDbdO1DLQ2eib9Z8U5b2jxdJq8DtdX4oKgMJQ0kVY9ZW64GPJEMVIv8U]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] 07/30/2026 19:15:14 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNNECPUV9VK1, RemoteIpAddress = 127.0.0.1, RemotePort = 38472, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1916uw97C9ra6RooS5n2e4tGL7lhJhcRTQxwxfkgUBgOsrxSRYUgs7srIya8z_5V3p4Lrz1ML6DF0antdEu3WjKNsYb3oIY6BXIg30dreaPVg6XiuAKqvYj17EOLpIzEeMFrFInVepSRihFEe19_XXVT6SZZhEKdn1hUly_fZZCKzMtZOu2dAC-ipzlPOXCOU3AKFCrzgSjt5KThPNM3RNvB1gbge7TRq99L2qQ_MOzl27YcSa98NFuXhGXQHl3QUsjsKgQwXqY6PILy6LkU6KVX8NZjNNOugp4E_ApR8FaIig_aWVVhHXiVa_qphVYcRyJzmThZOSudend3yy-8OKKHk93apGIdLh_66Q3J_1kNxHwrOnBsEu_vAuuI6vwIvKFE3DeP0qROgAjHP8mc3e0m3iwhKlIR2z3iHMj8Zq7h-lF4cOjrrNHUk55tVAAyEsfIniayLHDbdO1DLQ2eib9Z8U5b2jxdJq8DtdX4oKgMJQ0kVY9ZW64GPJEMVIv8U]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1916uw97C9ra6RooS5n2e4tGL7lhJhcRTQxwxfkgUBgOsrxSRYUgs7srIya8z_5V3p4Lrz1ML6DF0antdEu3WjKNsYb3oIY6BXIg30dreaPVg6XiuAKqvYj17EOLpIzEeMFrFInVepSRihFEe19_XXVT6SZZhEKdn1hUly_fZZCKzMtZOu2dAC-ipzlPOXCOU3AKFCrzgSjt5KThPNM3RNvB1gbge7TRq99L2qQ_MOzl27YcSa98NFuXhGXQHl3QUsjsKgQwXqY6PILy6LkU6KVX8NZjNNOugp4E_ApR8FaIig_aWVVhHXiVa_qphVYcRyJzmThZOSudend3yy-8OKKHk93apGIdLh_66Q3J_1kNxHwrOnBsEu_vAuuI6vwIvKFE3DeP0qROgAjHP8mc3e0m3iwhKlIR2z3iHMj8Zq7h-lF4cOjrrNHUk55tVAAyEsfIniayLHDbdO1DLQ2eib9Z8U5b2jxdJq8DtdX4oKgMJQ0kVY9ZW64GPJEMVIv8U]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] 07/30/2026 19:15:14 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNNECPUV9VK1, RemoteIpAddress = 127.0.0.1, RemotePort = 38472, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1916uw97C9ra6RooS5n2e4tGL7lhJhcRTQxwxfkgUBgOsrxSRYUgs7srIya8z_5V3p4Lrz1ML6DF0antdEu3WjKNsYb3oIY6BXIg30dreaPVg6XiuAKqvYj17EOLpIzEeMFrFInVepSRihFEe19_XXVT6SZZhEKdn1hUly_fZZCKzMtZOu2dAC-ipzlPOXCOU3AKFCrzgSjt5KThPNM3RNvB1gbge7TRq99L2qQ_MOzl27YcSa98NFuXhGXQHl3QUsjsKgQwXqY6PILy6LkU6KVX8NZjNNOugp4E_ApR8FaIig_aWVVhHXiVa_qphVYcRyJzmThZOSudend3yy-8OKKHk93apGIdLh_66Q3J_1kNxHwrOnBsEu_vAuuI6vwIvKFE3DeP0qROgAjHP8mc3e0m3iwhKlIR2z3iHMj8Zq7h-lF4cOjrrNHUk55tVAAyEsfIniayLHDbdO1DLQ2eib9Z8U5b2jxdJq8DtdX4oKgMJQ0kVY9ZW64GPJEMVIv8U]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1916uw97C9ra6RooS5n2e4tGL7lhJhcRTQxwxfkgUBgOsrxSRYUgs7srIya8z_5V3p4Lrz1ML6DF0antdEu3WjKNsYb3oIY6BXIg30dreaPVg6XiuAKqvYj17EOLpIzEeMFrFInVepSRihFEe19_XXVT6SZZhEKdn1hUly_fZZCKzMtZOu2dAC-ipzlPOXCOU3AKFCrzgSjt5KThPNM3RNvB1gbge7TRq99L2qQ_MOzl27YcSa98NFuXhGXQHl3QUsjsKgQwXqY6PILy6LkU6KVX8NZjNNOugp4E_ApR8FaIig_aWVVhHXiVa_qphVYcRyJzmThZOSudend3yy-8OKKHk93apGIdLh_66Q3J_1kNxHwrOnBsEu_vAuuI6vwIvKFE3DeP0qROgAjHP8mc3e0m3iwhKlIR2z3iHMj8Zq7h-lF4cOjrrNHUk55tVAAyEsfIniayLHDbdO1DLQ2eib9Z8U5b2jxdJq8DtdX4oKgMJQ0kVY9ZW64GPJEMVIv8U]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] 07/30/2026 19:15:14 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] 07/30/2026 19:15:14 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] 07/30/2026 19:15:14 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] 07/30/2026 19:15:14 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] 07/30/2026 19:15:14 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] 07/30/2026 19:15:14 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/30/2026 19:15:14 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/30/2026 19:15:14 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] 07/30/2026 19:15:14 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] 07/30/2026 19:15:15 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] 07/30/2026 19:15:15 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] 07/30/2026 19:15:15 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! 07/30/2026 19:15:15 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:15:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/30/2026 19:15:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4388830. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/30/2026 19:15:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=238, gen1=55, gen2=10, LatencyMode=Interactive, FreeMemory=6630850560, Live=275607768, HeapSizeBytes=288038960, FragmentedBytes=10030656, TotalCommittedBytes=312524800, PinnedObjectsCount=26, MemoryLoadBytes=1943639162, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/30/2026 19:15:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:15:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0618528. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0715370. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:15:16 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/30/2026 19:15:16 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] 07/30/2026 19:15:16 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] 07/30/2026 19:15:17 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 19:15:17 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] 07/30/2026 19:15:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 19:15:17 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/30/2026 19:15:24 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] 07/30/2026 19:40:58 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 07/30/2026 19:40:59 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0160415 ~ 5.98 samples/sec, 2 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:41:59 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0895704 ~ 6.07 samples/sec, 2 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:42:39 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Stopping generator [LazyDataGenerator.cs@93] 07/30/2026 19:42:39 DBUG [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 19:42:59 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0600626 ~ 6.03 samples/sec, 2 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:43:11 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 19:43:11 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 19:44:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0704919 ~ 6.08 samples/sec, 3 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:45:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0667163 ~ 6.08 samples/sec, 3 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:46:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0638645 ~ 6.08 samples/sec, 3 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:47:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0755889 ~ 6.08 samples/sec, 3 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:48:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0677246 ~ 6.08 samples/sec, 3 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:49:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0606414 ~ 6.08 samples/sec, 3 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:50:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0751824 ~ 6.08 samples/sec, 3 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:50:31 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:01.6901113 (1.6901113). Stats=NestingStats { ZMax = 40.900001525878906, ChamberVolume = 906987.8125, SinteredVolume = 175696.8046875, Density = 0.19371462578225107 } [ExhaustiveNester.cs@1820] 07/30/2026 19:50:31 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:02.7862740 [CurrentJobAutomatic.razor.cs@103] 07/30/2026 19:50:32 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"1dceec22-4cf5-48f3-bf3c-4d372bdfb06e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":175696.805,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"}. Original={"Name":"D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30","CreatedAt":"2026-07-30T17:12:39.2225858+00:00","ObjectFiles":[{"Id":"348598a5-f75c-4267-8c9b-98b8d8b03322","Name":"d790_flex_specimen_shorter.STL","Hash":"2B2585C7F9D89A6FC89AE68995DEA3F84AE1F3FB"},{"Id":"ce75fbc7-bb68-4696-8eda-35f2b795c8d5","Name":"d638_type1_engraved.1.2.STL","Hash":"DF1094145C185460BC10B5CA1BA89B9DBFE00060"},{"Id":"2a0e2b31-cf60-44fa-b164-43a6a6ee5d5e","Name":"3DBenchy.stl","Hash":"C240F46CA3F38C6C8D61B6F4247898577231AF18"},{"Id":"3f478ac2-7c3e-40fb-bb05-913e6ebc7e66","Name":"Nameplate Holder.STL","Hash":"2C8187E17D8DA6746AAF6F8A6C684D90E995FBD7"},{"Id":"a4ec0252-124f-45ef-9df8-ed261d046a49","Name":"caps_lock.STL","Hash":"AB8AEC7F87B22AC7DB3C5923377549F215AB7D09"},{"Id":"c326efd6-4062-4464-b98c-98f2e78f83d7","Name":"RocketBody.STL","Hash":"203721B10635DA30E4D01525DF5DE6469EF08C82"},{"Id":"c95cc0b6-96db-483d-a9ea-820a466c02f9","Name":"RocketNoseCone.STL","Hash":"4B732F07AF7F1BAF07D3F58C5E25AA0934998719"}],"PrintProfile":{"Id":"1dceec22-4cf5-48f3-bf3c-4d372bdfb06e","IsEmpty":false},"NestingState":{"ChamberDepth":40.9,"ChamberVolume":906987.812,"SinteredVolume":175696.805,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"70b140c4-94cf-47cc-a634-8eb96907070c"} 07/30/2026 19:51:01 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 19:51:01 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 19:51:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/30/2026 19:51:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3374988. SinceCollect=00:11:33.9769757. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/30/2026 19:51:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1494, gen1=185, gen2=25, LatencyMode=Interactive, FreeMemory=6126829568, Live=320365248, HeapSizeBytes=324582128, FragmentedBytes=4512288, TotalCommittedBytes=327761920, PinnedObjectsCount=24, MemoryLoadBytes=2450675466, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/30/2026 19:51:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis R by distance -520 [McuMovementClient.cs@545] 07/30/2026 19:51:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0195209. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:51:42 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 88098088101 (from now=87978088101, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 88227234789 (from now=88107234789, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 88227234789 (from now=88107234789, flags=None, requested=88227234789 (88227234789 @ 0) for mcu = 720.618002 [30/07/2026 18:26:52] (735.226956575 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:43 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 88227234789 (from now=88107234789, flags=None, requested=88227234789 (88227234789 @ 0) for mcu = 720.618002 [30/07/2026 18:26:52] (735.226956575 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1943023. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:02.3282386. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:51:44 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 88251234789 (88251234789 @ 0) for mcu = 720.817988 [30/07/2026 18:26:52] (735.426956575 sec) to 88374652727 (from now=88254652727, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.5758483. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:51:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.5909083. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:51:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z1 by distance -210000 [McuMovementClient.cs@545] 07/30/2026 19:51:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:45 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.6022380. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:51:45 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 88251234789 (88251234789 @ 0) for mcu = 720.817974 [30/07/2026 18:26:52] (735.426956575 sec) to 88527387300 (from now=88407387300, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 88650435413 (from now=88530435413, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 88251234789 (88251234789 @ 0) for mcu = 720.817995 [30/07/2026 18:26:52] (735.426956575 sec) to 88650435413 (from external timestamp, flags=None, requested=88650435413 (88650435413 @ 0) for mcu = 724.144710 [30/07/2026 18:26:56] (738.7536284416667 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:51:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 88650435413 (from now=88530435413, flags=None, requested=88650435413 (88650435413 @ 0) for mcu = 724.144710 [30/07/2026 18:26:56] (738.7536284416667 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6639541. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:06.3200968. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:51:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 88730435413 (88730435413 @ 0) for mcu = 724.811357 [30/07/2026 18:26:56] (739.4202951083333 sec) to 88853499770 (from now=88733499770, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.0834120. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:51:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.0952517. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:51:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z2 by distance -210000 [McuMovementClient.cs@545] 07/30/2026 19:51:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.1064862. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:51:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 88730435413 (88730435413 @ 0) for mcu = 724.811339 [30/07/2026 18:26:56] (739.4202951083333 sec) to 89067947503 (from now=88947947503, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 89191131512 (from now=89071131512, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 89191131512 (from now=89071131512, flags=None, requested=89191131512 (89191131512 @ 0) for mcu = 728.650540 [30/07/2026 18:27:00] (743.2594292666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 88730435413 (88730435413 @ 0) for mcu = 724.811358 [30/07/2026 18:26:56] (739.4202951083333 sec) to 89191131512 (from external timestamp, flags=None, requested=89191131512 (89191131512 @ 0) for mcu = 728.650540 [30/07/2026 18:27:00] (743.2594292666666 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:51:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6668401. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.8267734. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:51:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 89271131512 (89271131512 @ 0) for mcu = 729.317232 [30/07/2026 18:27:01] (743.9260959333334 sec) to 89394212550 (from now=89274212550, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:51:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.5345488. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:51:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 89271131512 (89271131512 @ 0) for mcu = 729.317216 [30/07/2026 18:27:01] (743.9260959333334 sec) to 89839351400 (from now=89719351400, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 89839351400 (from now=89719351400, flags=None, requested=89839351400 (89839351400 @ 0) for mcu = 734.052441 [30/07/2026 18:27:05] (748.6612616666666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:51:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 89271131512 (89271131512 @ 0) for mcu = 729.317216 [30/07/2026 18:27:01] (743.9260959333334 sec) to 89839351400 (from external timestamp, flags=None, requested=89839351400 (89839351400 @ 0) for mcu = 734.052441 [30/07/2026 18:27:05] (748.6612616666666 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:51:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:52:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0546234 ~ 5.96 samples/sec, 4 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:52:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:06.4148981. Loops = 26. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:21.0140891. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:52:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 90494033900 (90494033900 @ 0) for mcu = 739.508202 [30/07/2026 18:27:11] (754.1169491666667 sec) to 90615165570 (from now=90495165570, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:52:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 90494033900 (90494033900 @ 0) for mcu = 739.508202 [30/07/2026 18:27:11] (754.1169491666667 sec) to 90615165570 (from external timestamp, flags=None, requested=90615165570 (90615165570 @ 0) for mcu = 740.517645 [30/07/2026 18:27:12] (755.12637975 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:52:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 90494033900 (90494033900 @ 0) for mcu = 739.508202 [30/07/2026 18:27:11] (754.1169491666667 sec) to 90615165570 (from external timestamp, flags=None, requested=90615165570 (90615165570 @ 0) for mcu = 740.517645 [30/07/2026 18:27:12] (755.12637975 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:52:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:52:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1429851. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:22.1660019. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:52:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 90631965570 (90631965570 @ 0) for mcu = 740.657684 [30/07/2026 18:27:12] (755.26637975 sec) to 90953909561 (from now=90833909561, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:52:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 90631965570 (90631965570 @ 0) for mcu = 740.657684 [30/07/2026 18:27:12] (755.26637975 sec) to 90953909561 (from external timestamp, flags=None, requested=90953909561 (90953909561 @ 0) for mcu = 743.340586 [30/07/2026 18:27:15] (757.9492463416667 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:52:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 90631965570 (90631965570 @ 0) for mcu = 740.657684 [30/07/2026 18:27:12] (755.26637975 sec) to 90953909561 (from external timestamp, flags=None, requested=90953909561 (90953909561 @ 0) for mcu = 743.340586 [30/07/2026 18:27:15] (757.9492463416667 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:52:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:52:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:06.4156128. Loops = 26. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3061044. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:52:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 91608584561 (91608584561 @ 0) for mcu = 748.796329 [30/07/2026 18:27:20] (763.4048713416666 sec) to 91730146671 (from now=91610146671, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:52:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 91608584561 (91608584561 @ 0) for mcu = 748.796329 [30/07/2026 18:27:20] (763.4048713416666 sec) to 91730146671 (from external timestamp, flags=None, requested=91730146671 (91730146671 @ 0) for mcu = 749.809361 [30/07/2026 18:27:21] (764.417888925 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:52:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 91608584561 (91608584561 @ 0) for mcu = 748.796329 [30/07/2026 18:27:20] (763.4048713416666 sec) to 91730146671 (from external timestamp, flags=None, requested=91730146671 (91730146671 @ 0) for mcu = 749.809361 [30/07/2026 18:27:21] (764.417888925 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:52:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:52:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1428257. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:31.4594215. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:53:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0828279 ~ 6.07 samples/sec, 4 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:53:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Starting [LayerClient.cs@629] 07/30/2026 19:53:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:53:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/30/2026 19:53:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.5093153. SinceCollect=00:01:25.7735239. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/30/2026 19:53:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1608, gen1=194, gen2=26, LatencyMode=Interactive, FreeMemory=6458867712, Live=319210264, HeapSizeBytes=324075104, FragmentedBytes=5495344, TotalCommittedBytes=328679424, PinnedObjectsCount=25, MemoryLoadBytes=2112651264, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/30/2026 19:53:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 91746946671 (91746946671 @ 0) for mcu = 749.949357 [30/07/2026 18:27:21] (764.557888925 sec) to 98386519822 (from now=98266519822, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:53:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 91746946671 (91746946671 @ 0) for mcu = 749.949357 [30/07/2026 18:27:21] (764.557888925 sec) to 98386519822 (from external timestamp, flags=None, requested=98386519822 (98386519822 @ 0) for mcu = 805.279868 [30/07/2026 18:28:17] (819.8876651833333 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:53:07 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 91746946671 (91746946671 @ 0) for mcu = 749.949357 [30/07/2026 18:27:21] (764.557888925 sec) to 98386519822 (from external timestamp, flags=None, requested=98386519822 (98386519822 @ 0) for mcu = 805.279868 [30/07/2026 18:28:17] (819.8876651833333 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:53:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:53:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7393778. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:09.8286849. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:53:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 99444159628 (99444159628 @ 0) for mcu = 814.093617 [30/07/2026 18:28:26] (828.7013302333334 sec) to 99565629210 (from now=99445629210, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:53:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 99444159628 (99444159628 @ 0) for mcu = 814.093617 [30/07/2026 18:28:26] (828.7013302333334 sec) to 99565629210 (from external timestamp, flags=None, requested=99565629210 (99565629210 @ 0) for mcu = 815.105876 [30/07/2026 18:28:27] (829.71357675 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:53:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 99444159628 (99444159628 @ 0) for mcu = 814.093617 [30/07/2026 18:28:26] (828.7013302333334 sec) to 99565629210 (from external timestamp, flags=None, requested=99565629210 (99565629210 @ 0) for mcu = 815.105876 [30/07/2026 18:28:27] (829.71357675 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:53:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7278892. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.6424170. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:53:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 100621669016 (100621669016 @ 0) for mcu = 823.906308 [30/07/2026 18:28:35] (838.5139084666666 sec) to 100743206448 (from now=100623206448, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:53:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 100621669016 (100621669016 @ 0) for mcu = 823.906308 [30/07/2026 18:28:35] (838.5139084666666 sec) to 100743206448 (from external timestamp, flags=None, requested=100743206448 (100743206448 @ 0) for mcu = 824.919133 [30/07/2026 18:28:36] (839.5267204 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:53:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 100621669016 (100621669016 @ 0) for mcu = 823.906308 [30/07/2026 18:28:35] (838.5139084666666 sec) to 100743206448 (from external timestamp, flags=None, requested=100743206448 (100743206448 @ 0) for mcu = 824.919133 [30/07/2026 18:28:36] (839.5267204 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:53:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:53:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7281625. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.4536872. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:53:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 101799246254 (101799246254 @ 0) for mcu = 833.719579 [30/07/2026 18:28:45] (848.3270521166667 sec) to 101920565233 (from now=101800565233, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:53:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 101799246254 (101799246254 @ 0) for mcu = 833.719579 [30/07/2026 18:28:45] (848.3270521166667 sec) to 101920565233 (from external timestamp, flags=None, requested=101920565233 (101920565233 @ 0) for mcu = 834.730584 [30/07/2026 18:28:46] (849.3380436083334 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:53:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 101799246254 (101799246254 @ 0) for mcu = 833.719579 [30/07/2026 18:28:45] (848.3270521166667 sec) to 101920565233 (from external timestamp, flags=None, requested=101920565233 (101920565233 @ 0) for mcu = 834.730584 [30/07/2026 18:28:46] (849.3380436083334 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:53:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:53:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7277944. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.2668979. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:53:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 102976605039 (102976605039 @ 0) for mcu = 843.531038 [30/07/2026 18:28:55] (858.138375325 sec) to 103098152214 (from now=102978152214, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:53:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 102976605039 (102976605039 @ 0) for mcu = 843.531038 [30/07/2026 18:28:55] (858.138375325 sec) to 103098152214 (from external timestamp, flags=None, requested=103098152214 (103098152214 @ 0) for mcu = 844.543945 [30/07/2026 18:28:56] (859.15126845 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:53:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 102976605039 (102976605039 @ 0) for mcu = 843.531038 [30/07/2026 18:28:55] (858.138375325 sec) to 103098152214 (from external timestamp, flags=None, requested=103098152214 (103098152214 @ 0) for mcu = 844.543945 [30/07/2026 18:28:56] (859.15126845 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:53:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:53:53 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/30/2026 19:53:53 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/30/2026 19:53:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7286040. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.0772239. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:53:57 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Completed [LayerClient.cs@681] 07/30/2026 19:54:53 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0602395 ~ 6.08 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:54:58 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/30/2026 19:54:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/30/2026 19:54:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 19:54:59 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/30/2026 19:54:59 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 19:54:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/30/2026 19:55:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Starting [LayerClient.cs@689] 07/30/2026 19:55:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:55:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/30/2026 19:55:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4216262. SinceCollect=00:01:54.9183798. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/30/2026 19:55:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1761, gen1=208, gen2=28, LatencyMode=Interactive, FreeMemory=6394216448, Live=311757216, HeapSizeBytes=323469224, FragmentedBytes=12239000, TotalCommittedBytes=334184448, PinnedObjectsCount=24, MemoryLoadBytes=2197157314, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/30/2026 19:55:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 104154192020 (104154192020 @ 0) for mcu = 853.344413 [30/07/2026 18:29:05] (867.9516001666667 sec) to 112176380123 (from now=112056380123, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/30/2026 19:55:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 104154192020 (104154192020 @ 0) for mcu = 853.344413 [30/07/2026 18:29:05] (867.9516001666667 sec) to 112176380123 (from external timestamp, flags=None, requested=112176380123 (112176380123 @ 0) for mcu = 920.196957 [30/07/2026 18:30:12] (934.8031676916667 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:55:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 104154192020 (104154192020 @ 0) for mcu = 853.344413 [30/07/2026 18:29:05] (867.9516001666667 sec) to 112176380123 (from external timestamp, flags=None, requested=112176380123 (112176380123 @ 0) for mcu = 920.196957 [30/07/2026 18:30:12] (934.8031676916667 sec), advance=0) [McuStepper.cs@843] 07/30/2026 19:55:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:55:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.4462459. Loops = 6. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:01.4762594. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/30/2026 19:55:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Completed [LayerClient.cs@700] 07/30/2026 19:55:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0347593 ~ 6.03 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:56:52 WARN [SLS4All.Compact.ComponentModel.ToastMessage] [0] Error when checking halogen heaters: Halogen #2 did not produce expected surface temperature increase. Check whether it is operational. Halogen #3 did not produce expected surface temperature increase. Check whether it is operational. Halogen #4 did not produce expected surface temperature increase. Check whether it is operational. [UIToastProvider.cs@98] System.ApplicationException: Halogen #2 did not produce expected surface temperature increase. Check whether it is operational. Halogen #3 did not produce expected surface temperature increase. Check whether it is operational. Halogen #4 did not produce expected surface temperature increase. Check whether it is operational. at SLS4All.Compact.Temperature.HalogenHeaterChecker.CheckHalogenHeaters(StatusUpdater status, CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Temperature/Temperature/HalogenHeaterChecker.cs:line 113 at SLS4All.Compact.Temperature.HalogenHeaterChecker.CheckHalogenHeaters(StatusUpdater status, CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Temperature/Temperature/HalogenHeaterChecker.cs:line 117 at SLS4All.Compact.Pages.Wizards.PrintWizard.b__86_0(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.AppCore/Pages/Wizards/PrintWizard.razor:line 1766 at SLS4All.Compact.Components.CancelModal.Execute[T](Func`2 func, T defaultResult, String titleText, String bodyText, String cancelText, String errorToastHeaderText, ToastMessageType exceptionToastType, Boolean exceptionToastSilent, Func`1 statusFunc, Func`1 extraButtonsFunc) in /azp/_work/1/s/SLS4All.Compact.AppCore/Components/CancelModal.razor:line 194 07/30/2026 19:56:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.1144773 ~ 6.06 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:57:06 INFO [SLS4All.Compact.ComponentModel.ToastMessage] [0] Starting job: Job has been started! [UIToastProvider.cs@98] 07/30/2026 19:57:07 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 19:57:07 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 19:57:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/30/2026 19:57:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.7940720. SinceCollect=00:02:05.2131655. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1955, gen1=224, gen2=33, LatencyMode=Interactive, FreeMemory=6048219136, Live=270846712, HeapSizeBytes=276452040, FragmentedBytes=6632184, TotalCommittedBytes=276742144, PinnedObjectsCount=24, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/30/2026 19:57:08 INFO [SLS4All.Compact.Printing.PrintingService] [0] Starting soft heater, with analysis filename '/surface/analysis_2025-10-21_00-57-47.s4a-sha' and HalogenMaxPercent=100 [PrintingService.cs@1732] 07/30/2026 19:57:08 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Loading profile PrinterPath { IsSystemPath = False, PathUnsafe = /surface/analysis_2025-10-21_00-57-47.s4a-sha, PathSafe = /surface/analysis_2025-10-21_00-57-47.s4a-sha } [SoftAnalysisSurfaceHeater.cs@668] 07/30/2026 19:57:08 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 0, start=0, count=408, Z=0.001 [PrintingService.cs@1518] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 19:57:08 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Loaded prepared data from /home/SLS4All/.PrivateData/SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater/analysis_2025-10-21_00-57-47.0DF7023A24F0264E1569792DD4916C75BEE131F0.prepared.json [SoftAnalysisSurfaceHeater.cs@413] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 0, Z=0.001 [PrintingService.cs@1524] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/30/2026 19:57:08 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Starting heater [SoftAnalysisSurfaceHeater.cs@733] 07/30/2026 19:57:08 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin heating (soft heater running = True) [PrintingService.cs@2490] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Exiting run layers task [ControlledHeating.cs@529] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 0, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 9.232746086562862E-05, Elapsed = 00:00:00.0277460, TimeTotal = 08:20:51.7308067, Remaining = 08:20:51.7030607, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:33.8266989, WeightTotalEstimate = 02:31:33.8266989, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:31.7030607, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:00.0277460, HeatingEstimate = 01:10:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:15.3249597, WeightEstimate = 02:31:33.8266989 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:17:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: Progress;StartedAtUtc;Elapsed;TimeTotal;Remaining;Incomplete;SoftCount;LayerPrintDone;WeightsDone;WeightDone;WeightTotal;WeightTotalEstimate;LayerRecoatElapsed;LayerRecoatDelays;LayerRecoatPrintLayersElapsed;LayerRecoatNoDelayAverage;StreamingElapsed;ObjectLayerOverheadAverageDuration;TimeLayers;CoolingElapsed;CoolingEstimate;HeatingElapsed;HeatingEstimate;HeatingEstimate2;HeatingEstimate3;CoolingFrom;BedPreparationElapsed;BedPreparationTotal;PrintCapElapsed;PrintCapTotal;JobElapsed;JobTotal [PrintingService.cs@1916] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 9.232746086562862E-05;StartedAtUtc;00:00:00.0277460;08:20:51.7308067;08:20:51.7030607;False;408;0;0;00:00:00;02:31:33.8266989;02:31:33.8266989;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:31.7030607;00:00:00;02:00:00;00:00:00.0277460;01:10:00;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:15.3249597 [PrintingService.cs@1918] 07/30/2026 19:57:08 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Heat-up surface target 20 reached, setting surface run to 188 and after 00:45:00 to 188 [ControlledHeating.cs@566] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=49.916666666666664,powderChamber1=49.916666666666664,powderChamber2=49.916666666666664,powderChamber3=49.916666666666664,powderChamber4=49.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=66.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=49.916666666666664,printChamber1=49.916666666666664,printChamber2=49.916666666666664,printChamber3=49.916666666666664,printChamber4=49.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 66.43287404378255. Used = 66.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 19:57:08 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 1, start=0, count=408, Z=0.101 [PrintingService.cs@1518] 07/30/2026 19:57:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 429, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 19:57:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=67.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:57:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=50.916666666666664,powderChamber1=50.916666666666664,powderChamber2=50.916666666666664,powderChamber3=50.916666666666664,powderChamber4=50.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 7.5249645, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.025186337061596342, Elapsed = 00:00:07.5689343, TimeTotal = 08:20:51.7470305, Remaining = 08:20:44.1780962, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:33.8266989, WeightTotalEstimate = 02:31:33.8266989, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:31.7030607, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:07.5689343, HeatingEstimate = 01:09:52.4750355, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:15.3249597, WeightEstimate = 02:31:33.8266989 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:17:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:57:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.025186337061596342;StartedAtUtc;00:00:07.5689343;08:20:51.7470305;08:20:44.1780962;False;408;0;0;00:00:00;02:31:33.8266989;02:31:33.8266989;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:31.7030607;00:00:00;02:00:00;00:00:07.5689343;01:09:52.4750355;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:15.3249597 [PrintingService.cs@1918] 07/30/2026 19:57:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=50.916666666666664,printChamber1=50.916666666666664,printChamber2=50.916666666666664,printChamber3=50.916666666666664,printChamber4=50.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 67.43287404378255. Used = 67.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:57:19 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] 07/30/2026 19:57:19 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 19:57:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=68.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:57:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=51.916666666666664,powderChamber1=51.916666666666664,powderChamber2=51.916666666666664,powderChamber3=51.916666666666664,powderChamber4=51.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 15.0289488, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.05015169938594502, Elapsed = 00:00:15.0714611, TimeTotal = 08:20:51.7455730, Remaining = 08:20:36.6741119, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:33.8266989, WeightTotalEstimate = 02:31:33.8266989, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:31.7030607, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:15.0714611, HeatingEstimate = 01:09:44.9710512, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:15.3249597, WeightEstimate = 02:31:33.8266989 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:17:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:57:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.05015169938594502;StartedAtUtc;00:00:15.0714611;08:20:51.7455730;08:20:36.6741119;False;408;0;0;00:00:00;02:31:33.8266989;02:31:33.8266989;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:31.7030607;00:00:00;02:00:00;00:00:15.0714611;01:09:44.9710512;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:15.3249597 [PrintingService.cs@1918] 07/30/2026 19:57:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=51.916666666666664,printChamber1=51.916666666666664,printChamber2=51.916666666666664,printChamber3=51.916666666666664,printChamber4=51.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 68.43287404378255. Used = 68.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:57:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=155881, estimate=28.36394246353895 for layer 1, Z=0.101 [PrintingService.cs@1524] 07/30/2026 19:57:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 9 [PrintingService.cs@1569] 07/30/2026 19:57:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 2, start=0, count=408, Z=0.201 [PrintingService.cs@1518] 07/30/2026 19:57:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 538, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 19:57:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=69.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:57:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=52.916666666666664,powderChamber1=52.916666666666664,powderChamber2=52.916666666666664,powderChamber3=52.916666666666664,powderChamber4=52.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 22.5299444, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.07511247501420665, Elapsed = 00:00:22.5726100, TimeTotal = 08:20:51.7457263, Remaining = 08:20:29.1731163, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:33.8266989, WeightTotalEstimate = 02:31:33.8266989, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:31.7030607, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:22.5726100, HeatingEstimate = 01:09:37.4700556, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:15.3249597, WeightEstimate = 02:31:33.8266989 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:17:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:57:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.07511247501420665;StartedAtUtc;00:00:22.5726100;08:20:51.7457263;08:20:29.1731163;False;408;0;0;00:00:00;02:31:33.8266989;02:31:33.8266989;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:31.7030607;00:00:00;02:00:00;00:00:22.5726100;01:09:37.4700556;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:15.3249597 [PrintingService.cs@1918] 07/30/2026 19:57:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=52.916666666666664,printChamber1=52.916666666666664,printChamber2=52.916666666666664,printChamber3=52.916666666666664,printChamber4=52.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 69.43287404378255. Used = 69.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:57:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 52.916668 with temperature 49.5 [HeaterCheck.cs@67] 07/30/2026 19:57:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=70.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:57:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=53.916666666666664,powderChamber1=53.916666666666664,powderChamber2=53.916666666666664,powderChamber3=53.916666666666664,powderChamber4=53.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 30.0328993, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.10007888522319125, Elapsed = 00:00:30.0754520, TimeTotal = 08:20:51.7456134, Remaining = 08:20:21.6701614, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:33.8266989, WeightTotalEstimate = 02:31:33.8266989, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:31.7030607, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:30.0754520, HeatingEstimate = 01:09:29.9671007, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:15.3249597, WeightEstimate = 02:31:33.8266989 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:17:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:57:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.10007888522319125;StartedAtUtc;00:00:30.0754520;08:20:51.7456134;08:20:21.6701614;False;408;0;0;00:00:00;02:31:33.8266989;02:31:33.8266989;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:31.7030607;00:00:00;02:00:00;00:00:30.0754520;01:09:29.9671007;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:15.3249597 [PrintingService.cs@1918] 07/30/2026 19:57:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=53.916666666666664,printChamber1=53.916666666666664,printChamber2=53.916666666666664,printChamber3=53.916666666666664,printChamber4=53.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 70.43287404378255. Used = 70.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:57:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 53.916668 with temperature 49.5 [HeaterCheck.cs@67] 07/30/2026 19:57:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=118558, estimate=28.7642854207873 for layer 2, Z=0.201 [PrintingService.cs@1524] 07/30/2026 19:57:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 53.916668 with temperature 49.75 [HeaterCheck.cs@67] 07/30/2026 19:57:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 1, island count 9 [PrintingService.cs@1569] 07/30/2026 19:57:42 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 3, start=0, count=408, Z=0.301 [PrintingService.cs@1518] 07/30/2026 19:57:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 662, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 19:57:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 53.916668 with temperature 49.25 [HeaterCheck.cs@67] 07/30/2026 19:57:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=71.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:57:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=54.916666666666664,powderChamber1=54.916666666666664,powderChamber2=54.916666666666664,powderChamber3=54.916666666666664,powderChamber4=54.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 37.5406304, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.12506137531750117, Elapsed = 00:00:37.5831263, TimeTotal = 08:20:51.7455566, Remaining = 08:20:14.1624303, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:33.8266989, WeightTotalEstimate = 02:31:33.8266989, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:31.7030607, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:37.5831263, HeatingEstimate = 01:09:22.4593696, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:15.3249597, WeightEstimate = 02:31:33.8266989 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:17:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:57:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.12506137531750117;StartedAtUtc;00:00:37.5831263;08:20:51.7455566;08:20:14.1624303;False;408;0;0;00:00:00;02:31:33.8266989;02:31:33.8266989;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:31.7030607;00:00:00;02:00:00;00:00:37.5831263;01:09:22.4593696;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:15.3249597 [PrintingService.cs@1918] 07/30/2026 19:57:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=54.916666666666664,printChamber1=54.916666666666664,printChamber2=54.916666666666664,printChamber3=54.916666666666664,printChamber4=54.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 71.43287404378255. Used = 71.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:57:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] approaching new target of 54.916668 with temperature 49.25 [HeaterCheck.cs@88] 07/30/2026 19:57:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.916668 with temperature 50.25 [HeaterCheck.cs@67] 07/30/2026 19:57:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.916668 with temperature 50 [HeaterCheck.cs@67] 07/30/2026 19:57:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.916668 with temperature 50.25 [HeaterCheck.cs@67] 07/30/2026 19:57:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.916668 with temperature 53.75 [HeaterCheck.cs@67] 07/30/2026 19:57:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=72.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:57:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=55.916666666666664,powderChamber1=55.916666666666664,powderChamber2=55.916666666666664,powderChamber3=55.916666666666664,powderChamber4=55.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 45.0432185, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.15002693975092, Elapsed = 00:00:45.0857142, TimeTotal = 08:20:51.7455564, Remaining = 08:20:06.6598422, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:33.8266989, WeightTotalEstimate = 02:31:33.8266989, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:31.7030607, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:45.0857142, HeatingEstimate = 01:09:14.9567815, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:15.3249597, WeightEstimate = 02:31:33.8266989 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:17:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:57:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.15002693975092;StartedAtUtc;00:00:45.0857142;08:20:51.7455564;08:20:06.6598422;False;408;0;0;00:00:00;02:31:33.8266989;02:31:33.8266989;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:31.7030607;00:00:00;02:00:00;00:00:45.0857142;01:09:14.9567815;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:15.3249597 [PrintingService.cs@1918] 07/30/2026 19:57:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=55.916666666666664,printChamber1=55.916666666666664,printChamber2=55.916666666666664,printChamber3=55.916666666666664,printChamber4=55.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:57:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 72.43287404378255. Used = 72.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:57:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 355 samples in 00:01:00.0883491 ~ 5.91 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:58:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=73.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:58:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=56.916666666666664,powderChamber1=56.916666666666664,powderChamber2=56.916666666666664,powderChamber3=56.916666666666664,powderChamber4=56.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 52.5454363, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.17499130751966077, Elapsed = 00:00:52.5879425, TimeTotal = 08:20:51.7455669, Remaining = 08:19:59.1576244, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:33.8266989, WeightTotalEstimate = 02:31:33.8266989, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:31.7030607, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:52.5879425, HeatingEstimate = 01:09:07.4545637, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:15.3249597, WeightEstimate = 02:31:33.8266989 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:17:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:58:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.17499130751966077;StartedAtUtc;00:00:52.5879425;08:20:51.7455669;08:19:59.1576244;False;408;0;0;00:00:00;02:31:33.8266989;02:31:33.8266989;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:31.7030607;00:00:00;02:00:00;00:00:52.5879425;01:09:07.4545637;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:15.3249597 [PrintingService.cs@1918] 07/30/2026 19:58:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=56.916666666666664,printChamber1=56.916666666666664,printChamber2=56.916666666666664,printChamber3=56.916666666666664,printChamber4=56.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 73.43287404378255. Used = 73.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:58:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=158492, estimate=28.763194508776028 for layer 3, Z=0.301 [PrintingService.cs@1524] 07/30/2026 19:58:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 2, island count 9 [PrintingService.cs@1569] 07/30/2026 19:58:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 4, start=0, count=408, Z=0.401 [PrintingService.cs@1518] 07/30/2026 19:58:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 795, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 19:58:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=74.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:58:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=57.916666666666664,powderChamber1=57.916666666666664,powderChamber2=57.916666666666664,powderChamber3=57.916666666666664,powderChamber4=57.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 60.0459023, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.19995484633168756, Elapsed = 00:01:00.0899247, TimeTotal = 08:20:51.7470831, Remaining = 08:19:51.6571584, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:33.8266989, WeightTotalEstimate = 02:31:33.8266989, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:31.7030607, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:00.0899247, HeatingEstimate = 01:08:59.9540977, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:15.3249597, WeightEstimate = 02:31:33.8266989 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:17:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:58:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.19995484633168756;StartedAtUtc;00:01:00.0899247;08:20:51.7470831;08:19:51.6571584;False;408;0;0;00:00:00;02:31:33.8266989;02:31:33.8266989;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:31.7030607;00:00:00;02:00:00;00:01:00.0899247;01:08:59.9540977;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:15.3249597 [PrintingService.cs@1918] 07/30/2026 19:58:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=57.916666666666664,printChamber1=57.916666666666664,printChamber2=57.916666666666664,printChamber3=57.916666666666664,printChamber4=57.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 74.43287404378255. Used = 74.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:58:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=75.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:58:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=58.916666666666664,powderChamber1=58.916666666666664,powderChamber2=58.916666666666664,powderChamber3=58.916666666666664,powderChamber4=58.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 67.5485525, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.22491554965425573, Elapsed = 00:01:07.5910487, TimeTotal = 08:20:51.7455569, Remaining = 08:19:44.1545082, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:33.8266989, WeightTotalEstimate = 02:31:33.8266989, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:31.7030607, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:07.5910487, HeatingEstimate = 01:08:52.4514475, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:15.3249597, WeightEstimate = 02:31:33.8266989 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:17:59. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:58:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.22491554965425573;StartedAtUtc;00:01:07.5910487;08:20:51.7455569;08:19:44.1545082;False;408;0;0;00:00:00;02:31:33.8266989;02:31:33.8266989;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:31.7030607;00:00:00;02:00:00;00:01:07.5910487;01:08:52.4514475;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:15.3249597 [PrintingService.cs@1918] 07/30/2026 19:58:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=58.916666666666664,printChamber1=58.916666666666664,printChamber2=58.916666666666664,printChamber3=58.916666666666664,printChamber4=58.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 75.43287404378255. Used = 75.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:58:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=120921, estimate=29.450731813700475 for layer 4, Z=0.401 [PrintingService.cs@1524] 07/30/2026 19:58:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 13 [PrintingService.cs@1569] 07/30/2026 19:58:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 5, start=0, count=408, Z=0.501 [PrintingService.cs@1518] 07/30/2026 19:58:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 826, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 19:58:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=76.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:58:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=59.916666666666664,powderChamber1=59.916666666666664,powderChamber2=59.916666666666664,powderChamber3=59.916666666666664,powderChamber4=59.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 75.0494267, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.24985855628586437, Elapsed = 00:01:15.0919414, TimeTotal = 08:20:53.7802332, Remaining = 08:19:38.6882918, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:35.8613567, WeightTotalEstimate = 02:31:35.8613567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:33.7377185, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:15.0919414, HeatingEstimate = 01:08:44.9505733, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:17.3596175, WeightEstimate = 02:31:35.8613567 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:58:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.24985855628586437;StartedAtUtc;00:01:15.0919414;08:20:53.7802332;08:19:38.6882918;False;408;0;0;00:00:00;02:31:35.8613567;02:31:35.8613567;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:33.7377185;00:00:00;02:00:00;00:01:15.0919414;01:08:44.9505733;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:17.3596175 [PrintingService.cs@1918] 07/30/2026 19:58:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=59.916666666666664,printChamber1=59.916666666666664,printChamber2=59.916666666666664,printChamber3=59.916666666666664,printChamber4=59.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 76.43287404378255. Used = 76.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:58:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=77.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:58:30 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=48.5 that are outside of set tolerance 10 for current step target 59.916666666666664 and final target 145 [ControlledHeating.cs@205] 07/30/2026 19:58:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 77.43287404378255. Used = 77.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:58:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 82.5656232, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.2748676891140638, Elapsed = 00:01:22.6081312, TimeTotal = 08:20:53.7802265, Remaining = 08:19:31.1720953, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:35.8613567, WeightTotalEstimate = 02:31:35.8613567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:33.7377185, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:22.6081312, HeatingEstimate = 01:08:37.4343768, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:17.3596175, WeightEstimate = 02:31:35.8613567 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:58:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.2748676891140638;StartedAtUtc;00:01:22.6081312;08:20:53.7802265;08:19:31.1720953;False;408;0;0;00:00:00;02:31:35.8613567;02:31:35.8613567;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:33.7377185;00:00:00;02:00:00;00:01:22.6081312;01:08:37.4343768;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:17.3596175 [PrintingService.cs@1918] 07/30/2026 19:58:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=60.916666666666664,printChamber1=60.916666666666664,printChamber2=60.916666666666664,printChamber3=60.916666666666664,printChamber4=60.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=60.916666666666664,powderChamber1=60.916666666666664,powderChamber2=60.916666666666664,powderChamber3=60.916666666666664,powderChamber4=60.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=78.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:58:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=161424, estimate=29.80224518254116 for layer 5, Z=0.501 [PrintingService.cs@1524] 07/30/2026 19:58:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 78.43287404378255. Used = 78.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:58:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 90.0710633, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.2998415088201099, Elapsed = 00:01:30.1137085, TimeTotal = 08:20:53.7803637, Remaining = 08:19:23.6666552, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:35.8613567, WeightTotalEstimate = 02:31:35.8613567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:33.7377185, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:30.1137085, HeatingEstimate = 01:08:29.9289367, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:17.3596175, WeightEstimate = 02:31:35.8613567 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:58:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.2998415088201099;StartedAtUtc;00:01:30.1137085;08:20:53.7803637;08:19:23.6666552;False;408;0;0;00:00:00;02:31:35.8613567;02:31:35.8613567;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:33.7377185;00:00:00;02:00:00;00:01:30.1137085;01:08:29.9289367;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:17.3596175 [PrintingService.cs@1918] 07/30/2026 19:58:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=61.916666666666664,printChamber1=61.916666666666664,printChamber2=61.916666666666664,printChamber3=61.916666666666664,printChamber4=61.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 1, island count 13 [PrintingService.cs@1569] 07/30/2026 19:58:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 6, start=0, count=408, Z=0.601 [PrintingService.cs@1518] 07/30/2026 19:58:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 926, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 19:58:41 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=50 that are outside of set tolerance 10 for current step target 60.916666666666664 and final target 145 [ControlledHeating.cs@205] 07/30/2026 19:58:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=79.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:58:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 79.43287404378255. Used = 79.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:58:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 97.5732905, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.3248036942345516, Elapsed = 00:01:37.6157884, TimeTotal = 08:20:53.7802164, Remaining = 08:19:16.1644280, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:35.8613567, WeightTotalEstimate = 02:31:35.8613567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:33.7377185, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:37.6157884, HeatingEstimate = 01:08:22.4267095, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:17.3596175, WeightEstimate = 02:31:35.8613567 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:58:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.3248036942345516;StartedAtUtc;00:01:37.6157884;08:20:53.7802164;08:19:16.1644280;False;408;0;0;00:00:00;02:31:35.8613567;02:31:35.8613567;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:33.7377185;00:00:00;02:00:00;00:01:37.6157884;01:08:22.4267095;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:17.3596175 [PrintingService.cs@1918] 07/30/2026 19:58:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=62.916666666666664,printChamber1=62.916666666666664,printChamber2=62.916666666666664,printChamber3=62.916666666666664,printChamber4=62.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=80.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:58:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 80.43287404378255. Used = 80.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:58:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 105.0732818, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.34975896842643595, Elapsed = 00:01:45.1157917, TimeTotal = 08:20:53.7802284, Remaining = 08:19:08.6644367, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:35.8613567, WeightTotalEstimate = 02:31:35.8613567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:33.7377185, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:45.1157917, HeatingEstimate = 01:08:14.9267182, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:17.3596175, WeightEstimate = 02:31:35.8613567 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:58:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.34975896842643595;StartedAtUtc;00:01:45.1157917;08:20:53.7802284;08:19:08.6644367;False;408;0;0;00:00:00;02:31:35.8613567;02:31:35.8613567;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:33.7377185;00:00:00;02:00:00;00:01:45.1157917;01:08:14.9267182;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:17.3596175 [PrintingService.cs@1918] 07/30/2026 19:58:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=63.916666666666664,printChamber1=63.916666666666664,printChamber2=63.916666666666664,printChamber3=63.916666666666664,printChamber4=63.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:58:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0412991 ~ 5.98 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:58:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=122918, estimate=30.129692911474184 for layer 6, Z=0.601 [PrintingService.cs@1524] 07/30/2026 19:58:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 2, island count 13 [PrintingService.cs@1569] 07/30/2026 19:58:59 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 7, start=0, count=408, Z=0.701 [PrintingService.cs@1518] 07/30/2026 19:58:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 987, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 19:58:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=61.916666666666664,powderChamber1=61.916666666666664,powderChamber2=61.916666666666664,powderChamber3=61.916666666666664,powderChamber4=61.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:59:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=81.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:59:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 81.43287404378255. Used = 81.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:59:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 112.5738633, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.37471692143522756, Elapsed = 00:01:52.6166009, TimeTotal = 08:20:53.7804561, Remaining = 08:19:01.1638552, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:35.8613567, WeightTotalEstimate = 02:31:35.8613567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:33.7377185, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:52.6166009, HeatingEstimate = 01:08:07.4261367, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:17.3596175, WeightEstimate = 02:31:35.8613567 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:59:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.37471692143522756;StartedAtUtc;00:01:52.6166009;08:20:53.7804561;08:19:01.1638552;False;408;0;0;00:00:00;02:31:35.8613567;02:31:35.8613567;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:33.7377185;00:00:00;02:00:00;00:01:52.6166009;01:08:07.4261367;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:17.3596175 [PrintingService.cs@1918] 07/30/2026 19:59:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=64.91666666666666,printChamber1=64.91666666666666,printChamber2=64.91666666666666,printChamber3=64.91666666666666,printChamber4=64.91666666666666 [ControlledHeating.cs@169] 07/30/2026 19:59:06 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=51.5 that are outside of set tolerance 10 for current step target 61.916666666666664 and final target 145 [ControlledHeating.cs@205] 07/30/2026 19:59:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=82.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:59:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 82.43287404378255. Used = 82.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:59:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 120.0725449, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.3996670428397364, Elapsed = 00:02:00.1150547, TimeTotal = 08:20:53.7802283, Remaining = 08:18:53.6651736, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:35.8613567, WeightTotalEstimate = 02:31:35.8613567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:33.7377185, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:00.1150547, HeatingEstimate = 01:07:59.9274551, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:17.3596175, WeightEstimate = 02:31:35.8613567 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:59:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.3996670428397364;StartedAtUtc;00:02:00.1150547;08:20:53.7802283;08:18:53.6651736;False;408;0;0;00:00:00;02:31:35.8613567;02:31:35.8613567;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:33.7377185;00:00:00;02:00:00;00:02:00.1150547;01:07:59.9274551;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:17.3596175 [PrintingService.cs@1918] 07/30/2026 19:59:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=65.91666666666666,printChamber1=65.91666666666666,printChamber2=65.91666666666666,printChamber3=65.91666666666666,printChamber4=65.91666666666666 [ControlledHeating.cs@169] 07/30/2026 19:59:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 61.916668 with temperature 50 [HeaterCheck.cs@111] 07/30/2026 19:59:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=83.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:59:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 83.43287404378255. Used = 83.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:59:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 127.5734995, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.4246254301378095, Elapsed = 00:02:07.6159935, TimeTotal = 08:20:53.7802125, Remaining = 08:18:46.1642190, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:35.8613567, WeightTotalEstimate = 02:31:35.8613567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:33.7377185, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:07.6159935, HeatingEstimate = 01:07:52.4265005, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:17.3596175, WeightEstimate = 02:31:35.8613567 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:59:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4246254301378095;StartedAtUtc;00:02:07.6159935;08:20:53.7802125;08:18:46.1642190;False;408;0;0;00:00:00;02:31:35.8613567;02:31:35.8613567;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:33.7377185;00:00:00;02:00:00;00:02:07.6159935;01:07:52.4265005;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:17.3596175 [PrintingService.cs@1918] 07/30/2026 19:59:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=66.91666666666666,printChamber1=66.91666666666666,printChamber2=66.91666666666666,printChamber3=66.91666666666666,printChamber4=66.91666666666666 [ControlledHeating.cs@169] 07/30/2026 19:59:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=164810, estimate=30.336619454142678 for layer 7, Z=0.701 [PrintingService.cs@1524] 07/30/2026 19:59:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 3, island count 13 [PrintingService.cs@1569] 07/30/2026 19:59:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 8, start=0, count=408, Z=0.801 [PrintingService.cs@1518] 07/30/2026 19:59:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1019, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 19:59:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=84.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:59:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 84.43287404378255. Used = 84.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:59:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 135.0729909, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.4495791333578082, Elapsed = 00:02:15.1155248, TimeTotal = 08:20:53.7802524, Remaining = 08:18:38.6647276, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:35.8613567, WeightTotalEstimate = 02:31:35.8613567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:33.7377185, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:15.1155248, HeatingEstimate = 01:07:44.9270091, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:17.3596175, WeightEstimate = 02:31:35.8613567 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:59:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4495791333578082;StartedAtUtc;00:02:15.1155248;08:20:53.7802524;08:18:38.6647276;False;408;0;0;00:00:00;02:31:35.8613567;02:31:35.8613567;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:33.7377185;00:00:00;02:00:00;00:02:15.1155248;01:07:44.9270091;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:17.3596175 [PrintingService.cs@1918] 07/30/2026 19:59:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=67.91666666666666,printChamber1=67.91666666666666,printChamber2=67.91666666666666,printChamber3=67.91666666666666,printChamber4=67.91666666666666 [ControlledHeating.cs@169] 07/30/2026 19:59:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=85.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:59:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 85.43287404378255. Used = 85.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:59:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 142.572889, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.4745347480844983, Elapsed = 00:02:22.6156314, TimeTotal = 08:20:53.7804609, Remaining = 08:18:31.1648295, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:35.8613567, WeightTotalEstimate = 02:31:35.8613567, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:33.7377185, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:22.6156314, HeatingEstimate = 01:07:37.4271110, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:17.3596175, WeightEstimate = 02:31:35.8613567 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:59:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4745347480844983;StartedAtUtc;00:02:22.6156314;08:20:53.7804609;08:18:31.1648295;False;408;0;0;00:00:00;02:31:35.8613567;02:31:35.8613567;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:33.7377185;00:00:00;02:00:00;00:02:22.6156314;01:07:37.4271110;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:17.3596175 [PrintingService.cs@1918] 07/30/2026 19:59:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=68.91666666666666,printChamber1=68.91666666666666,printChamber2=68.91666666666666,printChamber3=68.91666666666666,printChamber4=68.91666666666666 [ControlledHeating.cs@169] 07/30/2026 19:59:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=126573, estimate=34.81386585868751 for layer 8, Z=0.801 [PrintingService.cs@1524] 07/30/2026 19:59:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=62.916666666666664,powderChamber1=62.916666666666664,powderChamber2=62.916666666666664,powderChamber3=62.916666666666664,powderChamber4=62.916666666666664 [ControlledHeating.cs@169] 07/30/2026 19:59:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 4, island count 13 [PrintingService.cs@1569] 07/30/2026 19:59:35 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 9, start=0, count=408, Z=0.901 [PrintingService.cs@1518] 07/30/2026 19:59:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1048, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 19:59:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=86.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:59:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 86.43287404378255. Used = 86.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:59:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 150.0757843, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.4993808148247762, Elapsed = 00:02:30.1182816, TimeTotal = 08:21:00.8828260, Remaining = 08:18:30.7645444, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:42.9639669, WeightTotalEstimate = 02:31:42.9639669, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:40.8403287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:30.1182816, HeatingEstimate = 01:07:29.9242157, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:24.4622277, WeightEstimate = 02:31:42.9639669 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:59:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4993808148247762;StartedAtUtc;00:02:30.1182816;08:21:00.8828260;08:18:30.7645444;False;408;0;0;00:00:00;02:31:42.9639669;02:31:42.9639669;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:40.8403287;00:00:00;02:00:00;00:02:30.1182816;01:07:29.9242157;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:24.4622277 [PrintingService.cs@1918] 07/30/2026 19:59:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=69.91666666666666,printChamber1=69.91666666666666,printChamber2=69.91666666666666,printChamber3=69.91666666666666,printChamber4=69.91666666666666 [ControlledHeating.cs@169] 07/30/2026 19:59:43 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=52 that are outside of set tolerance 10 for current step target 62.916666666666664 and final target 145 [ControlledHeating.cs@205] 07/30/2026 19:59:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=87.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:59:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 87.43287404378255. Used = 87.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:59:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 157.5776944, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.5243365346734589, Elapsed = 00:02:37.6201913, TimeTotal = 08:21:00.8828256, Remaining = 08:18:23.2626343, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:42.9639669, WeightTotalEstimate = 02:31:42.9639669, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:40.8403287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:37.6201913, HeatingEstimate = 01:07:22.4223056, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:24.4622277, WeightEstimate = 02:31:42.9639669 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:59:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5243365346734589;StartedAtUtc;00:02:37.6201913;08:21:00.8828256;08:18:23.2626343;False;408;0;0;00:00:00;02:31:42.9639669;02:31:42.9639669;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:40.8403287;00:00:00;02:00:00;00:02:37.6201913;01:07:22.4223056;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:24.4622277 [PrintingService.cs@1918] 07/30/2026 19:59:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=70.91666666666666,printChamber1=70.91666666666666,printChamber2=70.91666666666666,printChamber3=70.91666666666666,printChamber4=70.91666666666666 [ControlledHeating.cs@169] 07/30/2026 19:59:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=88.43287404378255 [ControlledHeating.cs@169] 07/30/2026 19:59:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 88.43287404378255. Used = 88.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 19:59:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 165.0774397, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.5492854683303805, Elapsed = 00:02:45.1200617, TimeTotal = 08:21:00.8829507, Remaining = 08:18:15.7628890, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:42.9639669, WeightTotalEstimate = 02:31:42.9639669, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:40.8403287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:45.1200617, HeatingEstimate = 01:07:14.9225603, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:24.4622277, WeightEstimate = 02:31:42.9639669 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 19:59:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5492854683303805;StartedAtUtc;00:02:45.1200617;08:21:00.8829507;08:18:15.7628890;False;408;0;0;00:00:00;02:31:42.9639669;02:31:42.9639669;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:40.8403287;00:00:00;02:00:00;00:02:45.1200617;01:07:14.9225603;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:24.4622277 [PrintingService.cs@1918] 07/30/2026 19:59:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=71.91666666666666,printChamber1=71.91666666666666,printChamber2=71.91666666666666,printChamber3=71.91666666666666,printChamber4=71.91666666666666 [ControlledHeating.cs@169] 07/30/2026 19:59:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=168180, estimate=31.128961700085643 for layer 9, Z=0.901 [PrintingService.cs@1524] 07/30/2026 19:59:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0366541 ~ 6.03 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 19:59:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 5, island count 13 [PrintingService.cs@1569] 07/30/2026 19:59:54 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 10, start=0, count=408, Z=1.001 [PrintingService.cs@1518] 07/30/2026 19:59:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1064, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 19:59:58 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/30/2026 19:59:59 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/30/2026 19:59:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/30/2026 19:59:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 19:59:59 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 19:59:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/30/2026 20:00:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=89.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:00:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 89.43287404378255. Used = 89.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:00:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 172.5778817, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.5742456922706175, Elapsed = 00:02:52.6233417, TimeTotal = 08:21:00.8857887, Remaining = 08:18:08.2624470, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:42.9639669, WeightTotalEstimate = 02:31:42.9639669, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:40.8403287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:52.6233417, HeatingEstimate = 01:07:07.4221183, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:24.4622277, WeightEstimate = 02:31:42.9639669 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:00:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5742456922706175;StartedAtUtc;00:02:52.6233417;08:21:00.8857887;08:18:08.2624470;False;408;0;0;00:00:00;02:31:42.9639669;02:31:42.9639669;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:40.8403287;00:00:00;02:00:00;00:02:52.6233417;01:07:07.4221183;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:24.4622277 [PrintingService.cs@1918] 07/30/2026 20:00:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=72.91666666666666,printChamber1=72.91666666666666,printChamber2=72.91666666666666,printChamber3=72.91666666666666,printChamber4=72.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:00:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=90.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:00:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 90.43287404378255. Used = 90.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:00:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 180.0811312, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.5991988181540261, Elapsed = 00:03:00.1244596, TimeTotal = 08:21:00.8836571, Remaining = 08:18:00.7591975, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:42.9639669, WeightTotalEstimate = 02:31:42.9639669, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:40.8403287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:00.1244596, HeatingEstimate = 01:06:59.9188688, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:24.4622277, WeightEstimate = 02:31:42.9639669 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:00:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5991988181540261;StartedAtUtc;00:03:00.1244596;08:21:00.8836571;08:18:00.7591975;False;408;0;0;00:00:00;02:31:42.9639669;02:31:42.9639669;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:40.8403287;00:00:00;02:00:00;00:03:00.1244596;01:06:59.9188688;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:24.4622277 [PrintingService.cs@1918] 07/30/2026 20:00:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=73.91666666666666,printChamber1=73.91666666666666,printChamber2=73.91666666666666,printChamber3=73.91666666666666,printChamber4=73.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:00:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=129196, estimate=34.223217065024556 for layer 10, Z=1.001 [PrintingService.cs@1524] 07/30/2026 20:00:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 6, island count 13 [PrintingService.cs@1569] 07/30/2026 20:00:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 11, start=0, count=408, Z=1.1010001 [PrintingService.cs@1518] 07/30/2026 20:00:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1119, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:00:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=91.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:00:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 91.43287404378255. Used = 91.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:00:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 187.5866612, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.6241642036475031, Elapsed = 00:03:07.6292706, TimeTotal = 08:21:00.8829381, Remaining = 08:17:53.2536675, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:42.9639669, WeightTotalEstimate = 02:31:42.9639669, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:40.8403287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:07.6292706, HeatingEstimate = 01:06:52.4133388, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:24.4622277, WeightEstimate = 02:31:42.9639669 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:00:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6241642036475031;StartedAtUtc;00:03:07.6292706;08:21:00.8829381;08:17:53.2536675;False;408;0;0;00:00:00;02:31:42.9639669;02:31:42.9639669;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:40.8403287;00:00:00;02:00:00;00:03:07.6292706;01:06:52.4133388;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:24.4622277 [PrintingService.cs@1918] 07/30/2026 20:00:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=74.91666666666666,printChamber1=74.91666666666666,printChamber2=74.91666666666666,printChamber3=74.91666666666666,printChamber4=74.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:00:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=92.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:00:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 92.43287404378255. Used = 92.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:00:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 195.0894189, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.6491230166689707, Elapsed = 00:03:15.1321107, TimeTotal = 08:21:00.8830205, Remaining = 08:17:45.7509098, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:42.9639669, WeightTotalEstimate = 02:31:42.9639669, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:40.8403287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:15.1321107, HeatingEstimate = 01:06:44.9105811, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:24.4622277, WeightEstimate = 02:31:42.9639669 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:00:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6491230166689707;StartedAtUtc;00:03:15.1321107;08:21:00.8830205;08:17:45.7509098;False;408;0;0;00:00:00;02:31:42.9639669;02:31:42.9639669;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:40.8403287;00:00:00;02:00:00;00:03:15.1321107;01:06:44.9105811;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:24.4622277 [PrintingService.cs@1918] 07/30/2026 20:00:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=75.91666666666666,printChamber1=75.91666666666666,printChamber2=75.91666666666666,printChamber3=75.91666666666666,printChamber4=75.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:00:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=171521, estimate=31.621778082961043 for layer 11, Z=1.1010001 [PrintingService.cs@1524] 07/30/2026 20:00:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 7, island count 13 [PrintingService.cs@1569] 07/30/2026 20:00:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 12, start=0, count=408, Z=1.2010001 [PrintingService.cs@1518] 07/30/2026 20:00:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1166, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:00:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=93.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:00:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 93.43287404378255. Used = 93.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:00:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 202.5932976, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.6740855342015346, Elapsed = 00:03:22.6360644, TimeTotal = 08:21:00.8830955, Remaining = 08:17:38.2470311, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:42.9639669, WeightTotalEstimate = 02:31:42.9639669, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:40.8403287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:22.6360644, HeatingEstimate = 01:06:37.4067024, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:24.4622277, WeightEstimate = 02:31:42.9639669 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:00:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6740855342015346;StartedAtUtc;00:03:22.6360644;08:21:00.8830955;08:17:38.2470311;False;408;0;0;00:00:00;02:31:42.9639669;02:31:42.9639669;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:40.8403287;00:00:00;02:00:00;00:03:22.6360644;01:06:37.4067024;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:24.4622277 [PrintingService.cs@1918] 07/30/2026 20:00:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=76.91666666666666,printChamber1=76.91666666666666,printChamber2=76.91666666666666,printChamber3=76.91666666666666,printChamber4=76.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:00:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 62.916668 with temperature 51.5 [HeaterCheck.cs@111] 07/30/2026 20:00:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=94.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:00:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 94.43287404378255. Used = 94.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:00:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 210.1009294, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.6990594719428975, Elapsed = 00:03:30.1434489, TimeTotal = 08:21:00.8828482, Remaining = 08:17:30.7393993, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:42.9639669, WeightTotalEstimate = 02:31:42.9639669, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:40.8403287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:30.1434489, HeatingEstimate = 01:06:29.8990706, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:24.4622277, WeightEstimate = 02:31:42.9639669 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:00:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6990594719428975;StartedAtUtc;00:03:30.1434489;08:21:00.8828482;08:17:30.7393993;False;408;0;0;00:00:00;02:31:42.9639669;02:31:42.9639669;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:40.8403287;00:00:00;02:00:00;00:03:30.1434489;01:06:29.8990706;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:24.4622277 [PrintingService.cs@1918] 07/30/2026 20:00:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=77.91666666666666,printChamber1=77.91666666666666,printChamber2=77.91666666666666,printChamber3=77.91666666666666,printChamber4=77.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:00:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=95.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:00:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 95.43287404378255. Used = 95.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:00:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 217.6053607, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.7240250153412235, Elapsed = 00:03:37.6483148, TimeTotal = 08:21:00.8832828, Remaining = 08:17:23.2349680, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:42.9639669, WeightTotalEstimate = 02:31:42.9639669, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:40.8403287, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:37.6483148, HeatingEstimate = 01:06:22.3946393, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:24.4622277, WeightEstimate = 02:31:42.9639669 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:00:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7240250153412235;StartedAtUtc;00:03:37.6483148;08:21:00.8832828;08:17:23.2349680;False;408;0;0;00:00:00;02:31:42.9639669;02:31:42.9639669;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:40.8403287;00:00:00;02:00:00;00:03:37.6483148;01:06:22.3946393;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:24.4622277 [PrintingService.cs@1918] 07/30/2026 20:00:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=78.91666666666666,printChamber1=78.91666666666666,printChamber2=78.91666666666666,printChamber3=78.91666666666666,printChamber4=78.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:00:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=131903, estimate=34.27544256309789 for layer 12, Z=1.2010001 [PrintingService.cs@1524] 07/30/2026 20:00:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 8, island count 13 [PrintingService.cs@1569] 07/30/2026 20:00:48 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 13, start=0, count=408, Z=1.3010001 [PrintingService.cs@1518] 07/30/2026 20:00:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1230, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:00:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=96.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:00:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 96.43287404378255. Used = 96.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:00:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 225.106636, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.7488318056624296, Elapsed = 00:03:45.1493778, TimeTotal = 08:21:06.7487809, Remaining = 08:17:21.5994031, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:48.8296773, WeightTotalEstimate = 02:31:48.8296773, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:46.7060391, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:45.1493778, HeatingEstimate = 01:06:14.8933640, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:30.3279381, WeightEstimate = 02:31:48.8296773 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:14. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:00:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7488318056624296;StartedAtUtc;00:03:45.1493778;08:21:06.7487809;08:17:21.5994031;False;408;0;0;00:00:00;02:31:48.8296773;02:31:48.8296773;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:46.7060391;00:00:00;02:00:00;00:03:45.1493778;01:06:14.8933640;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:30.3279381 [PrintingService.cs@1918] 07/30/2026 20:00:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=79.91666666666666,printChamber1=79.91666666666666,printChamber2=79.91666666666666,printChamber3=79.91666666666666,printChamber4=79.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:00:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1218558 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:01:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=63.916666666666664,powderChamber1=63.916666666666664,powderChamber2=63.916666666666664,powderChamber3=63.916666666666664,powderChamber4=63.916666666666664 [ControlledHeating.cs@169] 07/30/2026 20:01:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=97.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:01:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 97.43287404378255. Used = 97.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:01:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 232.6058953, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.7737736532046176, Elapsed = 00:03:52.6485800, TimeTotal = 08:21:06.7487238, Remaining = 08:17:14.1001438, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:48.8296773, WeightTotalEstimate = 02:31:48.8296773, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:46.7060391, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:52.6485800, HeatingEstimate = 01:06:07.3941047, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:30.3279381, WeightEstimate = 02:31:48.8296773 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:14. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:01:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7737736532046176;StartedAtUtc;00:03:52.6485800;08:21:06.7487238;08:17:14.1001438;False;408;0;0;00:00:00;02:31:48.8296773;02:31:48.8296773;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:46.7060391;00:00:00;02:00:00;00:03:52.6485800;01:06:07.3941047;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:30.3279381 [PrintingService.cs@1918] 07/30/2026 20:01:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=80.91666666666666,printChamber1=80.91666666666666,printChamber2=80.91666666666666,printChamber3=80.91666666666666,printChamber4=80.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:01:07 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=53 that are outside of set tolerance 10 for current step target 63.916666666666664 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:01:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=98.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:01:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 98.43287404378255. Used = 98.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:01:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 240.1092754, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.7987288180117742, Elapsed = 00:04:00.1517853, TimeTotal = 08:21:06.7485490, Remaining = 08:17:06.5967637, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:48.8296773, WeightTotalEstimate = 02:31:48.8296773, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:46.7060391, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:00.1517853, HeatingEstimate = 01:05:59.8907246, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:30.3279381, WeightEstimate = 02:31:48.8296773 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:14. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:01:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7987288180117742;StartedAtUtc;00:04:00.1517853;08:21:06.7485490;08:17:06.5967637;False;408;0;0;00:00:00;02:31:48.8296773;02:31:48.8296773;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:46.7060391;00:00:00;02:00:00;00:04:00.1517853;01:05:59.8907246;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:30.3279381 [PrintingService.cs@1918] 07/30/2026 20:01:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=81.91666666666666,printChamber1=81.91666666666666,printChamber2=81.91666666666666,printChamber3=81.91666666666666,printChamber4=81.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:01:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=174986, estimate=32.509516919156475 for layer 13, Z=1.3010001 [PrintingService.cs@1524] 07/30/2026 20:01:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 9, island count 13 [PrintingService.cs@1569] 07/30/2026 20:01:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 14, start=0, count=408, Z=1.401 [PrintingService.cs@1518] 07/30/2026 20:01:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1247, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:01:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=99.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:01:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 99.43287404378255. Used = 99.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:01:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 247.608684, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.8235313054479781, Elapsed = 00:04:07.6511735, TimeTotal = 08:21:11.8590613, Remaining = 08:17:04.2078878, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:53.9402100, WeightTotalEstimate = 02:31:53.9402100, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:51.8165718, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:07.6511735, HeatingEstimate = 01:05:52.3913160, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:35.4384708, WeightEstimate = 02:31:53.9402100 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:01:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8235313054479781;StartedAtUtc;00:04:07.6511735;08:21:11.8590613;08:17:04.2078878;False;408;0;0;00:00:00;02:31:53.9402100;02:31:53.9402100;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:51.8165718;00:00:00;02:00:00;00:04:07.6511735;01:05:52.3913160;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:35.4384708 [PrintingService.cs@1918] 07/30/2026 20:01:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=82.91666666666666,printChamber1=82.91666666666666,printChamber2=82.91666666666666,printChamber3=82.91666666666666,printChamber4=82.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:01:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=100.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:01:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 100.43287404378255. Used = 100.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:01:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 255.1095681, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.8484745072677125, Elapsed = 00:04:15.1520580, TimeTotal = 08:21:11.8590617, Remaining = 08:16:56.7070037, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:31:53.9402100, WeightTotalEstimate = 02:31:53.9402100, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:09:51.8165718, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:15.1520580, HeatingEstimate = 01:05:44.8904319, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:35.4384708, WeightEstimate = 02:31:53.9402100 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:01:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8484745072677125;StartedAtUtc;00:04:15.1520580;08:21:11.8590617;08:16:56.7070037;False;408;0;0;00:00:00;02:31:53.9402100;02:31:53.9402100;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:09:51.8165718;00:00:00;02:00:00;00:04:15.1520580;01:05:44.8904319;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:35.4384708 [PrintingService.cs@1918] 07/30/2026 20:01:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=83.91666666666666,printChamber1=83.91666666666666,printChamber2=83.91666666666666,printChamber3=83.91666666666666,printChamber4=83.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:01:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=134564, estimate=35.146177957677054 for layer 14, Z=1.401 [PrintingService.cs@1524] 07/30/2026 20:01:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 10, island count 13 [PrintingService.cs@1569] 07/30/2026 20:01:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 15, start=0, count=408, Z=1.501 [PrintingService.cs@1518] 07/30/2026 20:01:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1293, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:01:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=101.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:01:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 101.43287404378255. Used = 101.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:01:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 262.6088051, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.8730703695658679, Elapsed = 00:04:22.6512967, TimeTotal = 08:21:23.6342471, Remaining = 08:17:00.9829504, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:05.7153937, WeightTotalEstimate = 02:32:05.7153937, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:03.5917555, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:22.6512967, HeatingEstimate = 01:05:37.3911949, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:47.2136545, WeightEstimate = 02:32:05.7153937 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:01:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8730703695658679;StartedAtUtc;00:04:22.6512967;08:21:23.6342471;08:17:00.9829504;False;408;0;0;00:00:00;02:32:05.7153937;02:32:05.7153937;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:03.5917555;00:00:00;02:00:00;00:04:22.6512967;01:05:37.3911949;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:47.2136545 [PrintingService.cs@1918] 07/30/2026 20:01:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=84.91666666666666,printChamber1=84.91666666666666,printChamber2=84.91666666666666,printChamber3=84.91666666666666,printChamber4=84.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:01:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=102.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:01:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 102.43287404378255. Used = 102.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:01:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 270.109598, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.8980035162869924, Elapsed = 00:04:30.1520934, TimeTotal = 08:21:23.6342509, Remaining = 08:16:53.4821575, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:05.7153937, WeightTotalEstimate = 02:32:05.7153937, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:03.5917555, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:30.1520934, HeatingEstimate = 01:05:29.8904020, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:47.2136545, WeightEstimate = 02:32:05.7153937 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:01:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8980035162869924;StartedAtUtc;00:04:30.1520934;08:21:23.6342509;08:16:53.4821575;False;408;0;0;00:00:00;02:32:05.7153937;02:32:05.7153937;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:03.5917555;00:00:00;02:00:00;00:04:30.1520934;01:05:29.8904020;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:47.2136545 [PrintingService.cs@1918] 07/30/2026 20:01:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=85.91666666666666,printChamber1=85.91666666666666,printChamber2=85.91666666666666,printChamber3=85.91666666666666,printChamber4=85.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:01:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=103.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:01:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 103.43287404378255. Used = 103.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:01:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 277.6128984, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.9229450198348532, Elapsed = 00:04:37.6554042, TimeTotal = 08:21:23.6342613, Remaining = 08:16:45.9788571, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:05.7153937, WeightTotalEstimate = 02:32:05.7153937, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:03.5917555, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:37.6554042, HeatingEstimate = 01:05:22.3871016, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:47.2136545, WeightEstimate = 02:32:05.7153937 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:01:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9229450198348532;StartedAtUtc;00:04:37.6554042;08:21:23.6342613;08:16:45.9788571;False;408;0;0;00:00:00;02:32:05.7153937;02:32:05.7153937;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:03.5917555;00:00:00;02:00:00;00:04:37.6554042;01:05:22.3871016;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:47.2136545 [PrintingService.cs@1918] 07/30/2026 20:01:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=86.91666666666666,printChamber1=86.91666666666666,printChamber2=86.91666666666666,printChamber3=86.91666666666666,printChamber4=86.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:01:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=64.91666666666666,powderChamber1=64.91666666666666,powderChamber2=64.91666666666666,powderChamber3=64.91666666666666,powderChamber4=64.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:01:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 64.916664 with temperature 52.75 [HeaterCheck.cs@111] 07/30/2026 20:01:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=178534, estimate=32.827106358250994 for layer 15, Z=1.501 [PrintingService.cs@1524] 07/30/2026 20:01:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 11, island count 13 [PrintingService.cs@1569] 07/30/2026 20:01:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 16, start=0, count=408, Z=1.6010001 [PrintingService.cs@1518] 07/30/2026 20:01:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1319, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:01:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=104.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:01:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 104.43287404378255. Used = 104.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:01:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 285.1132805, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.9477323345557025, Elapsed = 00:04:45.1559764, TimeTotal = 08:21:28.2396857, Remaining = 08:16:43.0837093, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:10.3206280, WeightTotalEstimate = 02:32:10.3206280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:08.1969898, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:45.1559764, HeatingEstimate = 01:05:14.8867195, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:51.8188888, WeightEstimate = 02:32:10.3206280 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:01:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9477323345557025;StartedAtUtc;00:04:45.1559764;08:21:28.2396857;08:16:43.0837093;False;408;0;0;00:00:00;02:32:10.3206280;02:32:10.3206280;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:08.1969898;00:00:00;02:00:00;00:04:45.1559764;01:05:14.8867195;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:51.8188888 [PrintingService.cs@1918] 07/30/2026 20:01:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=87.91666666666666,printChamber1=87.91666666666666,printChamber2=87.91666666666666,printChamber3=87.91666666666666,printChamber4=87.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:01:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0362793 ~ 6.01 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:01:56 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=54 that are outside of set tolerance 10 for current step target 64.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:02:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=105.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:02:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 105.43287404378255. Used = 105.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:02:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 292.6194316, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.9726787968290024, Elapsed = 00:04:52.6619258, TimeTotal = 08:21:28.2394840, Remaining = 08:16:35.5775582, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:10.3206280, WeightTotalEstimate = 02:32:10.3206280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:08.1969898, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:52.6619258, HeatingEstimate = 01:05:07.3805684, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:51.8188888, WeightEstimate = 02:32:10.3206280 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:02:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9726787968290024;StartedAtUtc;00:04:52.6619258;08:21:28.2394840;08:16:35.5775582;False;408;0;0;00:00:00;02:32:10.3206280;02:32:10.3206280;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:08.1969898;00:00:00;02:00:00;00:04:52.6619258;01:05:07.3805684;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:51.8188888 [PrintingService.cs@1918] 07/30/2026 20:02:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=88.91666666666666,printChamber1=88.91666666666666,printChamber2=88.91666666666666,printChamber3=88.91666666666666,printChamber4=88.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:02:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=106.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:02:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 106.43287404378255. Used = 106.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:02:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 300.1224315, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 0.997618897927114, Elapsed = 00:05:00.1659736, TimeTotal = 08:21:28.2405319, Remaining = 08:16:28.0745583, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:10.3206280, WeightTotalEstimate = 02:32:10.3206280, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:08.1969898, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:00.1659736, HeatingEstimate = 01:04:59.8775685, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:30:51.8188888, WeightEstimate = 02:32:10.3206280 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:02:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.997618897927114;StartedAtUtc;00:05:00.1659736;08:21:28.2405319;08:16:28.0745583;False;408;0;0;00:00:00;02:32:10.3206280;02:32:10.3206280;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:08.1969898;00:00:00;02:00:00;00:05:00.1659736;01:04:59.8775685;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:30:51.8188888 [PrintingService.cs@1918] 07/30/2026 20:02:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=89.91666666666666,printChamber1=89.91666666666666,printChamber2=89.91666666666666,printChamber3=89.91666666666666,printChamber4=89.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:02:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=137152, estimate=35.683295281409606 for layer 16, Z=1.6010001 [PrintingService.cs@1524] 07/30/2026 20:02:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 12, island count 13 [PrintingService.cs@1569] 07/30/2026 20:02:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 17, start=0, count=408, Z=1.7010001 [PrintingService.cs@1518] 07/30/2026 20:02:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1335, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:02:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=107.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:02:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 107.43287404378255. Used = 107.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:02:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 307.6272779, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.022185772559359, Elapsed = 00:05:07.6697752, TimeTotal = 08:21:39.2034383, Remaining = 08:16:31.5336631, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:21.2845792, WeightTotalEstimate = 02:32:21.2845792, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:19.1609410, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:07.6697752, HeatingEstimate = 01:04:52.3727221, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:02.7828400, WeightEstimate = 02:32:21.2845792 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:47. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:02:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.022185772559359;StartedAtUtc;00:05:07.6697752;08:21:39.2034383;08:16:31.5336631;False;408;0;0;00:00:00;02:32:21.2845792;02:32:21.2845792;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:19.1609410;00:00:00;02:00:00;00:05:07.6697752;01:04:52.3727221;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:02.7828400 [PrintingService.cs@1918] 07/30/2026 20:02:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=90.91666666666666,printChamber1=90.91666666666666,printChamber2=90.91666666666666,printChamber3=90.91666666666666,printChamber4=90.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:02:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=108.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:02:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 108.43287404378255. Used = 108.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:02:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 315.1391511, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.0471428381678747, Elapsed = 00:05:15.1816532, TimeTotal = 08:21:39.2034431, Remaining = 08:16:24.0217899, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:21.2845792, WeightTotalEstimate = 02:32:21.2845792, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:19.1609410, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:15.1816532, HeatingEstimate = 01:04:44.8608489, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:02.7828400, WeightEstimate = 02:32:21.2845792 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:47. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:02:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0471428381678747;StartedAtUtc;00:05:15.1816532;08:21:39.2034431;08:16:24.0217899;False;408;0;0;00:00:00;02:32:21.2845792;02:32:21.2845792;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:19.1609410;00:00:00;02:00:00;00:05:15.1816532;01:04:44.8608489;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:02.7828400 [PrintingService.cs@1918] 07/30/2026 20:02:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=91.91666666666666,printChamber1=91.91666666666666,printChamber2=91.91666666666666,printChamber3=91.91666666666666,printChamber4=91.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:02:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=109.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:02:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 109.43287404378255. Used = 109.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:02:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 322.6432496, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.0720741070414008, Elapsed = 00:05:22.6857667, TimeTotal = 08:21:39.2034581, Remaining = 08:16:16.5176914, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:21.2845792, WeightTotalEstimate = 02:32:21.2845792, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:19.1609410, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:22.6857667, HeatingEstimate = 01:04:37.3567504, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:02.7828400, WeightEstimate = 02:32:21.2845792 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:47. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:02:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0720741070414008;StartedAtUtc;00:05:22.6857667;08:21:39.2034581;08:16:16.5176914;False;408;0;0;00:00:00;02:32:21.2845792;02:32:21.2845792;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:19.1609410;00:00:00;02:00:00;00:05:22.6857667;01:04:37.3567504;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:02.7828400 [PrintingService.cs@1918] 07/30/2026 20:02:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=92.91666666666666,printChamber1=92.91666666666666,printChamber2=92.91666666666666,printChamber3=92.91666666666666,printChamber4=92.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:02:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=181596, estimate=33.69010356981156 for layer 17, Z=1.7010001 [PrintingService.cs@1524] 07/30/2026 20:02:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 13, island count 13 [PrintingService.cs@1569] 07/30/2026 20:02:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 18, start=0, count=408, Z=1.8010001 [PrintingService.cs@1518] 07/30/2026 20:02:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1352, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:02:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=110.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:02:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 110.43287404378255. Used = 110.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:02:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 330.1508543, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.0969747290264729, Elapsed = 00:05:30.1935621, TimeTotal = 08:21:40.3800145, Remaining = 08:16:10.1864524, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:22.4609449, WeightTotalEstimate = 02:32:22.4609449, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:20.3373067, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:30.1935621, HeatingEstimate = 01:04:29.8491457, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:03.9592057, WeightEstimate = 02:32:22.4609449 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:02:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0969747290264729;StartedAtUtc;00:05:30.1935621;08:21:40.3800145;08:16:10.1864524;False;408;0;0;00:00:00;02:32:22.4609449;02:32:22.4609449;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:20.3373067;00:00:00;02:00:00;00:05:30.1935621;01:04:29.8491457;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:03.9592057 [PrintingService.cs@1918] 07/30/2026 20:02:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=93.91666666666666,printChamber1=93.91666666666666,printChamber2=93.91666666666666,printChamber3=93.91666666666666,printChamber4=93.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:02:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=111.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:02:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 111.43287404378255. Used = 111.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:02:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 337.6491149, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.1218849597686198, Elapsed = 00:05:37.6916341, TimeTotal = 08:21:40.3798259, Remaining = 08:16:02.6881918, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:22.4609449, WeightTotalEstimate = 02:32:22.4609449, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:20.3373067, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:37.6916341, HeatingEstimate = 01:04:22.3508851, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:03.9592057, WeightEstimate = 02:32:22.4609449 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:02:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1218849597686198;StartedAtUtc;00:05:37.6916341;08:21:40.3798259;08:16:02.6881918;False;408;0;0;00:00:00;02:32:22.4609449;02:32:22.4609449;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:20.3373067;00:00:00;02:00:00;00:05:37.6916341;01:04:22.3508851;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:03.9592057 [PrintingService.cs@1918] 07/30/2026 20:02:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=94.91666666666666,printChamber1=94.91666666666666,printChamber2=94.91666666666666,printChamber3=94.91666666666666,printChamber4=94.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:02:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=112.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:02:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 112.43287404378255. Used = 112.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:02:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 345.1485264, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.1467995532865163, Elapsed = 00:05:45.1910211, TimeTotal = 08:21:40.3798014, Remaining = 08:15:55.1887803, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:22.4609449, WeightTotalEstimate = 02:32:22.4609449, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:20.3373067, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:45.1910211, HeatingEstimate = 01:04:14.8514736, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:03.9592057, WeightEstimate = 02:32:22.4609449 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:02:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1467995532865163;StartedAtUtc;00:05:45.1910211;08:21:40.3798014;08:15:55.1887803;False;408;0;0;00:00:00;02:32:22.4609449;02:32:22.4609449;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:20.3373067;00:00:00;02:00:00;00:05:45.1910211;01:04:14.8514736;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:03.9592057 [PrintingService.cs@1918] 07/30/2026 20:02:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=95.91666666666666,printChamber1=95.91666666666666,printChamber2=95.91666666666666,printChamber3=95.91666666666666,printChamber4=95.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:02:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0091833 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:02:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=65.91666666666666,powderChamber1=65.91666666666666,powderChamber2=65.91666666666666,powderChamber3=65.91666666666666,powderChamber4=65.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:02:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:02:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 95.916664 with temperature 91.5 [HeaterCheck.cs@67] 07/30/2026 20:02:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:02:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.75 [HeaterCheck.cs@67] 07/30/2026 20:02:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=139329, estimate=36.397859745556524 for layer 18, Z=1.8010001 [PrintingService.cs@1524] 07/30/2026 20:02:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 14, island count 13 [PrintingService.cs@1569] 07/30/2026 20:02:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 19, start=0, count=408, Z=1.901 [PrintingService.cs@1518] 07/30/2026 20:02:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1376, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:03:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=113.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:03:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 113.43287404378255. Used = 113.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:03:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 352.651458, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.171326559368787, Elapsed = 00:05:52.6939984, TimeTotal = 08:21:50.6463931, Remaining = 08:15:57.9523947, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:32.7274909, WeightTotalEstimate = 02:32:32.7274909, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:30.6038527, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:52.6939984, HeatingEstimate = 01:04:07.3485420, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:14.2257517, WeightEstimate = 02:32:32.7274909 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:58. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:03:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.171326559368787;StartedAtUtc;00:05:52.6939984;08:21:50.6463931;08:15:57.9523947;False;408;0;0;00:00:00;02:32:32.7274909;02:32:32.7274909;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:30.6038527;00:00:00;02:00:00;00:05:52.6939984;01:04:07.3485420;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:14.2257517 [PrintingService.cs@1918] 07/30/2026 20:03:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=96.91666666666666,printChamber1=96.91666666666666,printChamber2=96.91666666666666,printChamber3=96.91666666666666,printChamber4=96.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:03:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=55.5 that are outside of set tolerance 10 for current step target 65.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:03:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=114.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:03:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 114.43287404378255. Used = 114.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:03:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 360.1517276, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.1962360476187248, Elapsed = 00:06:00.1944080, TimeTotal = 08:21:50.6465331, Remaining = 08:15:50.4521251, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:32.7274909, WeightTotalEstimate = 02:32:32.7274909, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:30.6038527, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:00.1944080, HeatingEstimate = 01:03:59.8482724, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:14.2257517, WeightEstimate = 02:32:32.7274909 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:58. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:03:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1962360476187248;StartedAtUtc;00:06:00.1944080;08:21:50.6465331;08:15:50.4521251;False;408;0;0;00:00:00;02:32:32.7274909;02:32:32.7274909;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:30.6038527;00:00:00;02:00:00;00:06:00.1944080;01:03:59.8482724;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:14.2257517 [PrintingService.cs@1918] 07/30/2026 20:03:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=97.91666666666666,printChamber1=97.91666666666666,printChamber2=97.91666666666666,printChamber3=97.91666666666666,printChamber4=97.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:03:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.75 [HeaterCheck.cs@67] 07/30/2026 20:03:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=115.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:03:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 115.43287404378255. Used = 115.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:03:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 367.6597311, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.22117078951052, Elapsed = 00:06:07.7024201, TimeTotal = 08:21:50.6465417, Remaining = 08:15:42.9441216, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:32.7274909, WeightTotalEstimate = 02:32:32.7274909, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:30.6038527, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:07.7024201, HeatingEstimate = 01:03:52.3402689, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:14.2257517, WeightEstimate = 02:32:32.7274909 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:58. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:03:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.22117078951052;StartedAtUtc;00:06:07.7024201;08:21:50.6465417;08:15:42.9441216;False;408;0;0;00:00:00;02:32:32.7274909;02:32:32.7274909;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:30.6038527;00:00:00;02:00:00;00:06:07.7024201;01:03:52.3402689;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:14.2257517 [PrintingService.cs@1918] 07/30/2026 20:03:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=98.91666666666666,printChamber1=98.91666666666666,printChamber2=98.91666666666666,printChamber3=98.91666666666666,printChamber4=98.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:03:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 62.25 [HeaterCheck.cs@67] 07/30/2026 20:03:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=116.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:03:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 116.43287404378255. Used = 116.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:03:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 375.1613009, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.2460835344964993, Elapsed = 00:06:15.2038064, TimeTotal = 08:21:50.6463582, Remaining = 08:15:35.4425518, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:32.7274909, WeightTotalEstimate = 02:32:32.7274909, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:30.6038527, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:15.2038064, HeatingEstimate = 01:03:44.8386991, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:14.2257517, WeightEstimate = 02:32:32.7274909 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:18:58. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:03:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2460835344964993;StartedAtUtc;00:06:15.2038064;08:21:50.6463582;08:15:35.4425518;False;408;0;0;00:00:00;02:32:32.7274909;02:32:32.7274909;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:30.6038527;00:00:00;02:00:00;00:06:15.2038064;01:03:44.8386991;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:14.2257517 [PrintingService.cs@1918] 07/30/2026 20:03:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=99.91666666666666,printChamber1=99.91666666666666,printChamber2=99.91666666666666,printChamber3=99.91666666666666,printChamber4=99.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:03:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=184513, estimate=33.81147023910032 for layer 19, Z=1.901 [PrintingService.cs@1524] 07/30/2026 20:03:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 15, island count 13 [PrintingService.cs@1569] 07/30/2026 20:03:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 20, start=0, count=408, Z=2.001 [PrintingService.cs@1518] 07/30/2026 20:03:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1421, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:03:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=117.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:03:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 117.43287404378255. Used = 117.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:03:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 382.6625527, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.2708077429370765, Elapsed = 00:06:22.7050440, TimeTotal = 08:21:55.1016845, Remaining = 08:15:32.3966405, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:37.1828314, WeightTotalEstimate = 02:32:37.1828314, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:35.0591932, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:22.7050440, HeatingEstimate = 01:03:37.3374473, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:18.6810922, WeightEstimate = 02:32:37.1828314 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:03:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2708077429370765;StartedAtUtc;00:06:22.7050440;08:21:55.1016845;08:15:32.3966405;False;408;0;0;00:00:00;02:32:37.1828314;02:32:37.1828314;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:35.0591932;00:00:00;02:00:00;00:06:22.7050440;01:03:37.3374473;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:18.6810922 [PrintingService.cs@1918] 07/30/2026 20:03:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=100.91666666666666,printChamber1=100.91666666666666,printChamber2=100.91666666666666,printChamber3=100.91666666666666,printChamber4=100.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:03:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 65.916664 with temperature 54.25 [HeaterCheck.cs@111] 07/30/2026 20:03:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.75 [HeaterCheck.cs@67] 07/30/2026 20:03:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=118.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:03:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 118.43287404378255. Used = 118.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:03:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 390.1671975, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.2957284222269745, Elapsed = 00:06:30.2099351, TimeTotal = 08:21:55.1019308, Remaining = 08:15:24.8919957, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:37.1828314, WeightTotalEstimate = 02:32:37.1828314, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:35.0591932, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:30.2099351, HeatingEstimate = 01:03:29.8328025, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:18.6810922, WeightEstimate = 02:32:37.1828314 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:03:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2957284222269745;StartedAtUtc;00:06:30.2099351;08:21:55.1019308;08:15:24.8919957;False;408;0;0;00:00:00;02:32:37.1828314;02:32:37.1828314;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:35.0591932;00:00:00;02:00:00;00:06:30.2099351;01:03:29.8328025;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:18.6810922 [PrintingService.cs@1918] 07/30/2026 20:03:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=101.91666666666666,printChamber1=101.91666666666666,printChamber2=101.91666666666666,printChamber3=101.91666666666666,printChamber4=101.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:03:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 101.916664 with temperature 96.5 [HeaterCheck.cs@88] 07/30/2026 20:03:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 101.916664 with temperature 97.5 [HeaterCheck.cs@67] 07/30/2026 20:03:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.916664 with temperature 97.25 [HeaterCheck.cs@67] 07/30/2026 20:03:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.916664 with temperature 97 [HeaterCheck.cs@67] 07/30/2026 20:03:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.916664 with temperature 97 [HeaterCheck.cs@67] 07/30/2026 20:03:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.916664 with temperature 97 [HeaterCheck.cs@67] 07/30/2026 20:03:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.5 [HeaterCheck.cs@67] 07/30/2026 20:03:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.916664 with temperature 97 [HeaterCheck.cs@67] 07/30/2026 20:03:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.916664 with temperature 97 [HeaterCheck.cs@67] 07/30/2026 20:03:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.5 [HeaterCheck.cs@67] 07/30/2026 20:03:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.916664 with temperature 97 [HeaterCheck.cs@67] 07/30/2026 20:03:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=119.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:03:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 119.43287404378255. Used = 119.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:03:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 397.6655449, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.3206275913458807, Elapsed = 00:06:37.7083461, TimeTotal = 08:21:55.1019944, Remaining = 08:15:17.3936483, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:37.1828314, WeightTotalEstimate = 02:32:37.1828314, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:35.0591932, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:37.7083461, HeatingEstimate = 01:03:22.3344551, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:18.6810922, WeightEstimate = 02:32:37.1828314 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:03:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3206275913458807;StartedAtUtc;00:06:37.7083461;08:21:55.1019944;08:15:17.3936483;False;408;0;0;00:00:00;02:32:37.1828314;02:32:37.1828314;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:35.0591932;00:00:00;02:00:00;00:06:37.7083461;01:03:22.3344551;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:18.6810922 [PrintingService.cs@1918] 07/30/2026 20:03:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=102.91666666666666,printChamber1=102.91666666666666,printChamber2=102.91666666666666,printChamber3=102.91666666666666,printChamber4=102.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:03:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 102.916664 with temperature 97.25 [HeaterCheck.cs@88] 07/30/2026 20:03:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.5 [HeaterCheck.cs@67] 07/30/2026 20:03:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=142792, estimate=37.133227163776446 for layer 20, Z=2.001 [PrintingService.cs@1524] 07/30/2026 20:03:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 16, island count 13 [PrintingService.cs@1569] 07/30/2026 20:03:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 21, start=0, count=408, Z=2.101 [PrintingService.cs@1518] 07/30/2026 20:03:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1469, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:03:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 63.25 [HeaterCheck.cs@67] 07/30/2026 20:03:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.5 [HeaterCheck.cs@67] 07/30/2026 20:03:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 102.916664 with temperature 98.25 [HeaterCheck.cs@67] 07/30/2026 20:03:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=120.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:03:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 120.43287404378255. Used = 120.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:03:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.75 [HeaterCheck.cs@67] 07/30/2026 20:03:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 405.1645424, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.3453638057701793, Elapsed = 00:06:45.2075086, TimeTotal = 08:21:58.8055500, Remaining = 08:15:13.5980414, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:40.8862220, WeightTotalEstimate = 02:32:40.8862220, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:38.7625838, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:45.2075086, HeatingEstimate = 01:03:14.8354576, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:22.3844828, WeightEstimate = 02:32:40.8862220 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:03:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3453638057701793;StartedAtUtc;00:06:45.2075086;08:21:58.8055500;08:15:13.5980414;False;408;0;0;00:00:00;02:32:40.8862220;02:32:40.8862220;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:38.7625838;00:00:00;02:00:00;00:06:45.2075086;01:03:14.8354576;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:22.3844828 [PrintingService.cs@1918] 07/30/2026 20:03:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=103.91666666666666,printChamber1=103.91666666666666,printChamber2=103.91666666666666,printChamber3=103.91666666666666,printChamber4=103.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:03:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1119817 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:03:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.5 [HeaterCheck.cs@67] 07/30/2026 20:03:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:03:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:03:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 103.916664 with temperature 99 [HeaterCheck.cs@67] 07/30/2026 20:03:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 103.916664 with temperature 99 [HeaterCheck.cs@67] 07/30/2026 20:03:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:04:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.5 [HeaterCheck.cs@67] 07/30/2026 20:04:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 103.916664 with temperature 99.25 [HeaterCheck.cs@67] 07/30/2026 20:04:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=121.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:04:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 121.43287404378255. Used = 121.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:04:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 412.6646773, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.370264141397727, Elapsed = 00:06:52.7071860, TimeTotal = 08:21:58.8050925, Remaining = 08:15:06.0979065, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:40.8862220, WeightTotalEstimate = 02:32:40.8862220, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:38.7625838, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:52.7071860, HeatingEstimate = 01:03:07.3353227, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:22.3844828, WeightEstimate = 02:32:40.8862220 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:04:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.370264141397727;StartedAtUtc;00:06:52.7071860;08:21:58.8050925;08:15:06.0979065;False;408;0;0;00:00:00;02:32:40.8862220;02:32:40.8862220;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:38.7625838;00:00:00;02:00:00;00:06:52.7071860;01:03:07.3353227;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:22.3844828 [PrintingService.cs@1918] 07/30/2026 20:04:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=104.91666666666666,printChamber1=104.91666666666666,printChamber2=104.91666666666666,printChamber3=104.91666666666666,printChamber4=104.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:04:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 104.916664 with temperature 99.25 [HeaterCheck.cs@88] 07/30/2026 20:04:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:04:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:04:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 104.916664 with temperature 100 [HeaterCheck.cs@67] 07/30/2026 20:04:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:04:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 104.916664 with temperature 100 [HeaterCheck.cs@67] 07/30/2026 20:04:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:04:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 104.916664 with temperature 100 [HeaterCheck.cs@67] 07/30/2026 20:04:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:04:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 104.916664 with temperature 100 [HeaterCheck.cs@67] 07/30/2026 20:04:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=122.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:04:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 122.43287404378255. Used = 122.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:04:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 420.1717412, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.3951889850633448, Elapsed = 00:07:00.2142511, TimeTotal = 08:21:58.8050937, Remaining = 08:14:58.5908426, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:40.8862220, WeightTotalEstimate = 02:32:40.8862220, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:38.7625838, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:00.2142511, HeatingEstimate = 01:02:59.8282588, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:22.3844828, WeightEstimate = 02:32:40.8862220 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:04:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3951889850633448;StartedAtUtc;00:07:00.2142511;08:21:58.8050937;08:14:58.5908426;False;408;0;0;00:00:00;02:32:40.8862220;02:32:40.8862220;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:38.7625838;00:00:00;02:00:00;00:07:00.2142511;01:02:59.8282588;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:22.3844828 [PrintingService.cs@1918] 07/30/2026 20:04:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=105.91666666666666,printChamber1=105.91666666666666,printChamber2=105.91666666666666,printChamber3=105.91666666666666,printChamber4=105.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:04:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:04:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=189646, estimate=35.215272475230684 for layer 21, Z=2.101 [PrintingService.cs@1524] 07/30/2026 20:04:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 17, island count 13 [PrintingService.cs@1569] 07/30/2026 20:04:09 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 22, start=0, count=408, Z=2.201 [PrintingService.cs@1518] 07/30/2026 20:04:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1497, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:04:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.75 [HeaterCheck.cs@67] 07/30/2026 20:04:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.5 [HeaterCheck.cs@67] 07/30/2026 20:04:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 62 [HeaterCheck.cs@67] 07/30/2026 20:04:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=123.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:04:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 123.43287404378255. Used = 123.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:04:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 427.6736572, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.4199027664830428, Elapsed = 00:07:07.7161793, TimeTotal = 08:22:02.9203433, Remaining = 08:14:55.2041640, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:45.0014594, WeightTotalEstimate = 02:32:45.0014594, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:42.8778212, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:07.7161793, HeatingEstimate = 01:02:52.3263428, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:26.4997202, WeightEstimate = 02:32:45.0014594 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:04:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4199027664830428;StartedAtUtc;00:07:07.7161793;08:22:02.9203433;08:14:55.2041640;False;408;0;0;00:00:00;02:32:45.0014594;02:32:45.0014594;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:42.8778212;00:00:00;02:00:00;00:07:07.7161793;01:02:52.3263428;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:26.4997202 [PrintingService.cs@1918] 07/30/2026 20:04:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=106.91666666666666,printChamber1=106.91666666666666,printChamber2=106.91666666666666,printChamber3=106.91666666666666,printChamber4=106.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:04:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 106.916664 with temperature 101.75 [HeaterCheck.cs@88] 07/30/2026 20:04:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 106.916664 with temperature 102 [HeaterCheck.cs@67] 07/30/2026 20:04:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:04:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.5 [HeaterCheck.cs@67] 07/30/2026 20:04:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=124.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:04:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 124.43287404378255. Used = 124.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:04:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 435.1752253, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.4448059198835954, Elapsed = 00:07:15.2177362, TimeTotal = 08:22:02.9203321, Remaining = 08:14:47.7025959, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:45.0014594, WeightTotalEstimate = 02:32:45.0014594, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:42.8778212, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:15.2177362, HeatingEstimate = 01:02:44.8247747, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:26.4997202, WeightEstimate = 02:32:45.0014594 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:04:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4448059198835954;StartedAtUtc;00:07:15.2177362;08:22:02.9203321;08:14:47.7025959;False;408;0;0;00:00:00;02:32:45.0014594;02:32:45.0014594;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:42.8778212;00:00:00;02:00:00;00:07:15.2177362;01:02:44.8247747;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:26.4997202 [PrintingService.cs@1918] 07/30/2026 20:04:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=107.91666666666666,printChamber1=107.91666666666666,printChamber2=107.91666666666666,printChamber3=107.91666666666666,printChamber4=107.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:04:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 62 [HeaterCheck.cs@67] 07/30/2026 20:04:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:04:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:04:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61 [HeaterCheck.cs@67] 07/30/2026 20:04:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 107.916664 with temperature 103 [HeaterCheck.cs@67] 07/30/2026 20:04:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=125.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:04:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 125.43287404378255. Used = 125.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:04:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 442.6779619, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.4697129792303487, Elapsed = 00:07:22.7204698, TimeTotal = 08:22:02.9203291, Remaining = 08:14:40.1998593, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:45.0014594, WeightTotalEstimate = 02:32:45.0014594, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:42.8778212, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:22.7204698, HeatingEstimate = 01:02:37.3220381, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:26.4997202, WeightEstimate = 02:32:45.0014594 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:04:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4697129792303487;StartedAtUtc;00:07:22.7204698;08:22:02.9203291;08:14:40.1998593;False;408;0;0;00:00:00;02:32:45.0014594;02:32:45.0014594;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:42.8778212;00:00:00;02:00:00;00:07:22.7204698;01:02:37.3220381;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:26.4997202 [PrintingService.cs@1918] 07/30/2026 20:04:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=108.91666666666666,printChamber1=108.91666666666666,printChamber2=108.91666666666666,printChamber3=108.91666666666666,printChamber4=108.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:04:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 65.916664 with temperature 61.25 [HeaterCheck.cs@67] 07/30/2026 20:04:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=146402, estimate=38.232227752591534 for layer 22, Z=2.201 [PrintingService.cs@1524] 07/30/2026 20:04:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 18, island count 13 [PrintingService.cs@1569] 07/30/2026 20:04:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 23, start=0, count=408, Z=2.3009999 [PrintingService.cs@1518] 07/30/2026 20:04:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1519, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:04:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 108.916664 with temperature 104 [HeaterCheck.cs@67] 07/30/2026 20:04:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=66.91666666666666,powderChamber1=66.91666666666666,powderChamber2=66.91666666666666,powderChamber3=66.91666666666666,powderChamber4=66.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:04:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 108.916664 with temperature 104.25 [HeaterCheck.cs@67] 07/30/2026 20:04:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 108.916664 with temperature 105 [HeaterCheck.cs@67] 07/30/2026 20:04:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=126.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:04:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 126.43287404378255. Used = 126.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:04:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 450.1781013, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.49414663407652, Elapsed = 00:07:30.2206405, TimeTotal = 08:22:12.2929244, Remaining = 08:14:42.0722839, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:54.3740234, WeightTotalEstimate = 02:32:54.3740234, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:52.2503852, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:30.2206405, HeatingEstimate = 01:02:29.8218987, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:35.8722842, WeightEstimate = 02:32:54.3740234 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:04:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.49414663407652;StartedAtUtc;00:07:30.2206405;08:22:12.2929244;08:14:42.0722839;False;408;0;0;00:00:00;02:32:54.3740234;02:32:54.3740234;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:52.2503852;00:00:00;02:00:00;00:07:30.2206405;01:02:29.8218987;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:35.8722842 [PrintingService.cs@1918] 07/30/2026 20:04:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=109.91666666666666,printChamber1=109.91666666666666,printChamber2=109.91666666666666,printChamber3=109.91666666666666,printChamber4=109.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:04:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 109.916664 with temperature 105.25 [HeaterCheck.cs@67] 07/30/2026 20:04:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 109.916664 with temperature 105 [HeaterCheck.cs@67] 07/30/2026 20:04:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 109.916664 with temperature 105 [HeaterCheck.cs@67] 07/30/2026 20:04:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 109.916664 with temperature 105 [HeaterCheck.cs@67] 07/30/2026 20:04:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=56 that are outside of set tolerance 10 for current step target 66.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:04:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 109.916664 with temperature 105 [HeaterCheck.cs@67] 07/30/2026 20:04:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=127.43287404378255 [ControlledHeating.cs@169] 07/30/2026 20:04:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 127.43287404378255. Used = 127.43287404378255 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:04:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 457.6857968, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.5190779174518367, Elapsed = 00:07:37.7330799, TimeTotal = 08:22:12.2976683, Remaining = 08:14:34.5645884, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:54.3740234, WeightTotalEstimate = 02:32:54.3740234, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:52.2503852, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:37.7330799, HeatingEstimate = 01:02:22.3142032, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:35.8722842, WeightEstimate = 02:32:54.3740234 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:04:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5190779174518367;StartedAtUtc;00:07:37.7330799;08:22:12.2976683;08:14:34.5645884;False;408;0;0;00:00:00;02:32:54.3740234;02:32:54.3740234;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:52.2503852;00:00:00;02:00:00;00:07:37.7330799;01:02:22.3142032;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:35.8722842 [PrintingService.cs@1918] 07/30/2026 20:04:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=110.91666666666666,printChamber1=110.91666666666666,printChamber2=110.91666666666666,printChamber3=110.91666666666666,printChamber4=110.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:04:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 110.916664 with temperature 105.75 [HeaterCheck.cs@88] 07/30/2026 20:04:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 110.916664 with temperature 106.25 [HeaterCheck.cs@67] 07/30/2026 20:04:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=128.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:04:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 128.43287404378253. Used = 128.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:04:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 465.1886694, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.5439624332605553, Elapsed = 00:07:45.2312842, TimeTotal = 08:22:12.2930000, Remaining = 08:14:27.0617158, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:54.3740234, WeightTotalEstimate = 02:32:54.3740234, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:52.2503852, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:45.2312842, HeatingEstimate = 01:02:14.8113306, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:35.8722842, WeightEstimate = 02:32:54.3740234 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:04:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5439624332605553;StartedAtUtc;00:07:45.2312842;08:22:12.2930000;08:14:27.0617158;False;408;0;0;00:00:00;02:32:54.3740234;02:32:54.3740234;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:52.2503852;00:00:00;02:00:00;00:07:45.2312842;01:02:14.8113306;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:35.8722842 [PrintingService.cs@1918] 07/30/2026 20:04:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=111.91666666666666,printChamber1=111.91666666666666,printChamber2=111.91666666666666,printChamber3=111.91666666666666,printChamber4=111.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:04:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1637095 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:04:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=193760, estimate=35.6773494081659 for layer 23, Z=2.3009999 [PrintingService.cs@1524] 07/30/2026 20:04:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 19, island count 13 [PrintingService.cs@1569] 07/30/2026 20:04:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 24, start=0, count=408, Z=2.401 [PrintingService.cs@1518] 07/30/2026 20:04:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1552, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:04:58 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/30/2026 20:04:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/30/2026 20:04:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 20:04:59 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/30/2026 20:04:59 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 20:04:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/30/2026 20:05:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=129.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:05:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 129.43287404378253. Used = 129.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:05:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 472.6888865, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.5687147637528869, Elapsed = 00:07:52.7313755, TimeTotal = 08:22:14.9478199, Remaining = 08:14:22.2164444, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:57.0289691, WeightTotalEstimate = 02:32:57.0289691, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:54.9053309, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:52.7313755, HeatingEstimate = 01:02:07.3111135, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:38.5272299, WeightEstimate = 02:32:57.0289691 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:05:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5687147637528869;StartedAtUtc;00:07:52.7313755;08:22:14.9478199;08:14:22.2164444;False;408;0;0;00:00:00;02:32:57.0289691;02:32:57.0289691;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:54.9053309;00:00:00;02:00:00;00:07:52.7313755;01:02:07.3111135;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:38.5272299 [PrintingService.cs@1918] 07/30/2026 20:05:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=112.91666666666666,printChamber1=112.91666666666666,printChamber2=112.91666666666666,printChamber3=112.91666666666666,printChamber4=112.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:05:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=130.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:05:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 130.43287404378253. Used = 130.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:05:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 480.1897243, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.5936056288705907, Elapsed = 00:08:00.2322249, TimeTotal = 08:22:14.9478315, Remaining = 08:14:14.7156066, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:57.0289691, WeightTotalEstimate = 02:32:57.0289691, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:54.9053309, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:00.2322249, HeatingEstimate = 01:01:59.8102757, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:38.5272299, WeightEstimate = 02:32:57.0289691 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:05:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5936056288705907;StartedAtUtc;00:08:00.2322249;08:22:14.9478315;08:14:14.7156066;False;408;0;0;00:00:00;02:32:57.0289691;02:32:57.0289691;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:54.9053309;00:00:00;02:00:00;00:08:00.2322249;01:01:59.8102757;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:38.5272299 [PrintingService.cs@1918] 07/30/2026 20:05:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=113.91666666666666,printChamber1=113.91666666666666,printChamber2=113.91666666666666,printChamber3=113.91666666666666,printChamber4=113.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:05:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 113.916664 with temperature 109.25 [HeaterCheck.cs@67] 07/30/2026 20:05:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 113.916664 with temperature 108.96428680419922 [HeaterCheck.cs@67] 07/30/2026 20:05:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 113.916664 with temperature 109.25 [HeaterCheck.cs@67] 07/30/2026 20:05:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 113.916664 with temperature 109 [HeaterCheck.cs@67] 07/30/2026 20:05:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=131.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:05:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 131.43287404378253. Used = 131.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:05:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 487.6893379, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.6184923662822082, Elapsed = 00:08:07.7318301, TimeTotal = 08:22:14.9478231, Remaining = 08:14:07.2159930, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:32:57.0289691, WeightTotalEstimate = 02:32:57.0289691, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:10:54.9053309, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:07.7318301, HeatingEstimate = 01:01:52.3106621, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:38.5272299, WeightEstimate = 02:32:57.0289691 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:05:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6184923662822082;StartedAtUtc;00:08:07.7318301;08:22:14.9478231;08:14:07.2159930;False;408;0;0;00:00:00;02:32:57.0289691;02:32:57.0289691;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:10:54.9053309;00:00:00;02:00:00;00:08:07.7318301;01:01:52.3106621;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:38.5272299 [PrintingService.cs@1918] 07/30/2026 20:05:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=114.91666666666666,printChamber1=114.91666666666666,printChamber2=114.91666666666666,printChamber3=114.91666666666666,printChamber4=114.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:05:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=149035, estimate=38.74601775837726 for layer 24, Z=2.401 [PrintingService.cs@1524] 07/30/2026 20:05:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 20, island count 13 [PrintingService.cs@1569] 07/30/2026 20:05:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 25, start=0, count=408, Z=2.501 [PrintingService.cs@1518] 07/30/2026 20:05:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1573, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:05:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=132.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:05:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 132.43287404378253. Used = 132.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:05:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 495.1888472, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.642674968346744, Elapsed = 00:08:15.2313356, TimeTotal = 08:22:27.8591409, Remaining = 08:14:12.6278053, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:33:09.9402907, WeightTotalEstimate = 02:33:09.9402907, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:11:07.8166525, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:15.2313356, HeatingEstimate = 01:01:44.8111528, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:51.4385515, WeightEstimate = 02:33:09.9402907 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:05:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.642674968346744;StartedAtUtc;00:08:15.2313356;08:22:27.8591409;08:14:12.6278053;False;408;0;0;00:00:00;02:33:09.9402907;02:33:09.9402907;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:11:07.8166525;00:00:00;02:00:00;00:08:15.2313356;01:01:44.8111528;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:51.4385515 [PrintingService.cs@1918] 07/30/2026 20:05:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=115.91666666666666,printChamber1=115.91666666666666,printChamber2=115.91666666666666,printChamber3=115.91666666666666,printChamber4=115.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:05:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=67.91666666666666,powderChamber1=67.91666666666666,powderChamber2=67.91666666666666,powderChamber3=67.91666666666666,powderChamber4=67.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:05:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 67.916664 with temperature 63.25 [HeaterCheck.cs@67] 07/30/2026 20:05:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=133.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:05:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 133.43287404378253. Used = 133.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:05:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 502.6902773, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.667557258515925, Elapsed = 00:08:22.7328142, TimeTotal = 08:22:27.8591894, Remaining = 08:14:05.1263752, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:33:09.9402907, WeightTotalEstimate = 02:33:09.9402907, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:11:07.8166525, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:22.7328142, HeatingEstimate = 01:01:37.3097227, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:51.4385515, WeightEstimate = 02:33:09.9402907 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:05:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.667557258515925;StartedAtUtc;00:08:22.7328142;08:22:27.8591894;08:14:05.1263752;False;408;0;0;00:00:00;02:33:09.9402907;02:33:09.9402907;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:11:07.8166525;00:00:00;02:00:00;00:08:22.7328142;01:01:37.3097227;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:51.4385515 [PrintingService.cs@1918] 07/30/2026 20:05:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=116.91666666666666,printChamber1=116.91666666666666,printChamber2=116.91666666666666,printChamber3=116.91666666666666,printChamber4=116.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:05:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=68.91666666666666,powderChamber1=68.91666666666666,powderChamber2=68.91666666666666,powderChamber3=68.91666666666666,powderChamber4=68.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:05:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 68.916664 with temperature 63.25 [HeaterCheck.cs@88] 07/30/2026 20:05:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] approaching new target of 68.916664 with temperature 63.5 [HeaterCheck.cs@88] 07/30/2026 20:05:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:05:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 56 [HeaterCheck.cs@111] 07/30/2026 20:05:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:05:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:05:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:05:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:05:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:05:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:05:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 116.916664 with temperature 112.5 [HeaterCheck.cs@67] 07/30/2026 20:05:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:05:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=134.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:05:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 134.43287404378253. Used = 134.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:05:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 510.1885337, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.6924287084480647, Elapsed = 00:08:30.2310231, TimeTotal = 08:22:27.8591419, Remaining = 08:13:57.6281188, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:33:09.9402907, WeightTotalEstimate = 02:33:09.9402907, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:11:07.8166525, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:30.2310231, HeatingEstimate = 01:01:29.8114663, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:31:51.4385515, WeightEstimate = 02:33:09.9402907 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:05:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6924287084480647;StartedAtUtc;00:08:30.2310231;08:22:27.8591419;08:13:57.6281188;False;408;0;0;00:00:00;02:33:09.9402907;02:33:09.9402907;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:11:07.8166525;00:00:00;02:00:00;00:08:30.2310231;01:01:29.8114663;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:31:51.4385515 [PrintingService.cs@1918] 07/30/2026 20:05:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=117.91666666666666,printChamber1=117.91666666666666,printChamber2=117.91666666666666,printChamber3=117.91666666666666,printChamber4=117.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:05:38 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=56 that are outside of set tolerance 10 for current step target 68.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:05:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:05:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:05:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:05:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=135.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:05:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 135.43287404378253. Used = 135.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:05:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:05:45 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=106.75 that are outside of set tolerance 10 for current step target 117.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:05:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=196894, estimate=36.50806644915082 for layer 25, Z=2.501 [PrintingService.cs@1524] 07/30/2026 20:05:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 21, island count 13 [PrintingService.cs@1569] 07/30/2026 20:05:46 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 26, start=0, count=408, Z=2.601 [PrintingService.cs@1518] 07/30/2026 20:05:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1596, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:05:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:05:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 117.916664 with temperature 113 [HeaterCheck.cs@67] 07/30/2026 20:05:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:05:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 117.916664 with temperature 113.25 [HeaterCheck.cs@67] 07/30/2026 20:05:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=136.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:05:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 136.43287404378253. Used = 136.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:05:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:05:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0681145 ~ 5.96 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:05:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:05:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:05:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:05:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 59 [HeaterCheck.cs@111] 07/30/2026 20:06:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=137.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:06:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 137.43287404378253. Used = 137.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:06:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:06:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:06:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:06:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:06:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=151242, estimate=39.41648694868996 for layer 26, Z=2.601 [PrintingService.cs@1524] 07/30/2026 20:06:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 22, island count 13 [PrintingService.cs@1569] 07/30/2026 20:06:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 27, start=0, count=408, Z=2.701 [PrintingService.cs@1518] 07/30/2026 20:06:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1655, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:06:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=138.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:06:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 138.43287404378253. Used = 138.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:06:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:06:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:06:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.92856979370117 [HeaterCheck.cs@67] 07/30/2026 20:06:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=139.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:06:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 139.43287404378253. Used = 139.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:06:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=140.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:06:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 140.43287404378253. Used = 140.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:06:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (34 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:06:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:06:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 558.7031797, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.8527447673173447, Elapsed = 00:09:18.7456684, TimeTotal = 08:22:37.7248122, Remaining = 08:13:18.9791438, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:33:19.8059617, WeightTotalEstimate = 02:33:19.8059617, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:11:17.6823235, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:18.7456684, HeatingEstimate = 01:00:41.2968203, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:32:01.3042225, WeightEstimate = 02:33:19.8059617 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:45. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:06:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8527447673173447;StartedAtUtc;00:09:18.7456684;08:22:37.7248122;08:13:18.9791438;False;408;0;0;00:00:00;02:33:19.8059617;02:33:19.8059617;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:11:17.6823235;00:00:00;02:00:00;00:09:18.7456684;01:00:41.2968203;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:32:01.3042225 [PrintingService.cs@1918] 07/30/2026 20:06:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=118.91666666666666,printChamber1=118.91666666666666,printChamber2=118.91666666666666,printChamber3=118.91666666666666,printChamber4=118.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:06:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] no longer approaching new target of 118.916664 with temperature 108 [HeaterCheck.cs@111] 07/30/2026 20:06:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 65.25 [HeaterCheck.cs@67] 07/30/2026 20:06:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:06:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=141.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:06:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 141.43287404378253. Used = 141.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:06:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.5 [HeaterCheck.cs@67] 07/30/2026 20:06:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:06:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=199383, estimate=36.65661967087884 for layer 27, Z=2.701 [PrintingService.cs@1524] 07/30/2026 20:06:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 23, island count 13 [PrintingService.cs@1569] 07/30/2026 20:06:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 28, start=0, count=408, Z=2.8009999 [PrintingService.cs@1518] 07/30/2026 20:06:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1675, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:06:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=108.5 that are outside of set tolerance 10 for current step target 118.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:06:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:06:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 567.2068599, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.8805202372239882, Elapsed = 00:09:27.2495108, TimeTotal = 08:22:44.4991408, Remaining = 08:13:17.2496300, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:33:26.5801281, WeightTotalEstimate = 02:33:26.5801281, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:11:24.4564899, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:27.2495108, HeatingEstimate = 01:00:32.7931401, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:32:08.0783889, WeightEstimate = 02:33:26.5801281 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:06:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8805202372239882;StartedAtUtc;00:09:27.2495108;08:22:44.4991408;08:13:17.2496300;False;408;0;0;00:00:00;02:33:26.5801281;02:33:26.5801281;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:11:24.4564899;00:00:00;02:00:00;00:09:27.2495108;01:00:32.7931401;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:32:08.0783889 [PrintingService.cs@1918] 07/30/2026 20:06:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=119.91666666666666,printChamber1=119.91666666666666,printChamber2=119.91666666666666,printChamber3=119.91666666666666,printChamber4=119.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:06:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:06:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=142.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:06:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 142.43287404378253. Used = 142.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:06:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:06:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 119.916664 with temperature 115 [HeaterCheck.cs@67] 07/30/2026 20:06:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 119.916664 with temperature 115 [HeaterCheck.cs@67] 07/30/2026 20:06:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=109.75 that are outside of set tolerance 10 for current step target 119.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:06:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 119.916664 with temperature 115 [HeaterCheck.cs@67] 07/30/2026 20:06:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 575.709094, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.9087059673264788, Elapsed = 00:09:35.7515922, TimeTotal = 08:22:44.4989881, Remaining = 08:13:08.7473959, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:33:26.5801281, WeightTotalEstimate = 02:33:26.5801281, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:11:24.4564899, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:35.7515922, HeatingEstimate = 01:00:24.2909060, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:32:08.0783889, WeightEstimate = 02:33:26.5801281 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:06:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9087059673264788;StartedAtUtc;00:09:35.7515922;08:22:44.4989881;08:13:08.7473959;False;408;0;0;00:00:00;02:33:26.5801281;02:33:26.5801281;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:11:24.4564899;00:00:00;02:00:00;00:09:35.7515922;01:00:24.2909060;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:32:08.0783889 [PrintingService.cs@1918] 07/30/2026 20:06:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=120.91666666666666,printChamber1=120.91666666666666,printChamber2=120.91666666666666,printChamber3=120.91666666666666,printChamber4=120.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:06:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 120.916664 with temperature 115 [HeaterCheck.cs@88] 07/30/2026 20:06:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=143.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:06:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 143.43287404378253. Used = 143.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:06:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:06:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 120.916664 with temperature 116 [HeaterCheck.cs@67] 07/30/2026 20:06:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:06:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 583.2095104, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.9335710047046835, Elapsed = 00:09:43.2520061, TimeTotal = 08:22:44.4989856, Remaining = 08:13:01.2469795, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:33:26.5801281, WeightTotalEstimate = 02:33:26.5801281, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:11:24.4564899, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:43.2520061, HeatingEstimate = 01:00:16.7904896, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:32:08.0783889, WeightEstimate = 02:33:26.5801281 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:19:52. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:06:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9335710047046835;StartedAtUtc;00:09:43.2520061;08:22:44.4989856;08:13:01.2469795;False;408;0;0;00:00:00;02:33:26.5801281;02:33:26.5801281;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:11:24.4564899;00:00:00;02:00:00;00:09:43.2520061;01:00:16.7904896;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:32:08.0783889 [PrintingService.cs@1918] 07/30/2026 20:06:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=121.91666666666666,printChamber1=121.91666666666666,printChamber2=121.91666666666666,printChamber3=121.91666666666666,printChamber4=121.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:06:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 121.916664 with temperature 117.5 [HeaterCheck.cs@67] 07/30/2026 20:06:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=144.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:06:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 144.43287404378253. Used = 144.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:06:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 121.916664 with temperature 118 [HeaterCheck.cs@67] 07/30/2026 20:06:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=153262, estimate=39.71227669809232 for layer 28, Z=2.8009999 [PrintingService.cs@1524] 07/30/2026 20:06:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 24, island count 13 [PrintingService.cs@1569] 07/30/2026 20:06:54 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 29, start=0, count=408, Z=2.901 [PrintingService.cs@1518] 07/30/2026 20:06:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1702, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:06:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0120305 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:06:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:06:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 121.916664 with temperature 117 [HeaterCheck.cs@67] 07/30/2026 20:06:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 590.7091225, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 1.957883346628031, Elapsed = 00:09:50.7516920, TimeTotal = 08:22:52.9770069, Remaining = 08:13:02.2253149, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:33:35.0580756, WeightTotalEstimate = 02:33:35.0580756, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:11:32.9344374, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:09:50.7516920, HeatingEstimate = 01:00:09.2908775, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:32:16.5563364, WeightEstimate = 02:33:35.0580756 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:20:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:06:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.957883346628031;StartedAtUtc;00:09:50.7516920;08:22:52.9770069;08:13:02.2253149;False;408;0;0;00:00:00;02:33:35.0580756;02:33:35.0580756;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:11:32.9344374;00:00:00;02:00:00;00:09:50.7516920;01:00:09.2908775;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:32:16.5563364 [PrintingService.cs@1918] 07/30/2026 20:06:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=122.91666666666666,printChamber1=122.91666666666666,printChamber2=122.91666666666666,printChamber3=122.91666666666666,printChamber4=122.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:06:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 122.916664 with temperature 117.75 [HeaterCheck.cs@88] 07/30/2026 20:07:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 122.916664 with temperature 118 [HeaterCheck.cs@67] 07/30/2026 20:07:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=145.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:07:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 145.43287404378253. Used = 145.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:07:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:07:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:07:06 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=112.75 that are outside of set tolerance 10 for current step target 122.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:07:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=146.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:07:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 146.43287404378253. Used = 146.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:07:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 58.5 [HeaterCheck.cs@111] 07/30/2026 20:07:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 56.75 [HeaterCheck.cs@111] 07/30/2026 20:07:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 65.5 [HeaterCheck.cs@67] 07/30/2026 20:07:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 122.916664 with temperature 117.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:07:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=147.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:07:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 147.43287404378253. Used = 147.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:07:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=202137, estimate=37.30173221096675 for layer 29, Z=2.901 [PrintingService.cs@1524] 07/30/2026 20:07:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 25, island count 13 [PrintingService.cs@1569] 07/30/2026 20:07:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 30, start=0, count=408, Z=3.001 [PrintingService.cs@1518] 07/30/2026 20:07:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1695, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:07:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=148.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:07:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 148.43287404378253. Used = 148.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:07:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 122.916664 with temperature 118 [HeaterCheck.cs@67] 07/30/2026 20:07:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 122.916664 with temperature 118.25 [HeaterCheck.cs@67] 07/30/2026 20:07:24 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (339 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:07:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 617.2093185, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.045241180453811, Elapsed = 00:10:17.2518433, TimeTotal = 08:22:59.9049031, Remaining = 08:12:42.6530598, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:33:41.9860165, WeightTotalEstimate = 02:33:41.9860165, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:11:39.8623783, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:17.2518433, HeatingEstimate = 00:59:42.7906815, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:32:23.4842773, WeightEstimate = 02:33:41.9860165 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:20:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:07:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.045241180453811;StartedAtUtc;00:10:17.2518433;08:22:59.9049031;08:12:42.6530598;False;408;0;0;00:00:00;02:33:41.9860165;02:33:41.9860165;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:11:39.8623783;00:00:00;02:00:00;00:10:17.2518433;00:59:42.7906815;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:32:23.4842773 [PrintingService.cs@1918] 07/30/2026 20:07:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=123.91666666666666,printChamber1=123.91666666666666,printChamber2=123.91666666666666,printChamber3=123.91666666666666,printChamber4=123.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:07:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 123.916664 with temperature 118.25 [HeaterCheck.cs@88] 07/30/2026 20:07:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 123.916664 with temperature 119 [HeaterCheck.cs@67] 07/30/2026 20:07:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=149.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:07:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 149.43287404378253. Used = 149.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:07:32 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=113 that are outside of set tolerance 10 for current step target 123.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:07:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 625.7101352, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.0734093784001626, Elapsed = 00:10:25.7529854, TimeTotal = 08:22:59.9052285, Remaining = 08:12:34.1522431, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:33:41.9860165, WeightTotalEstimate = 02:33:41.9860165, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:11:39.8623783, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:25.7529854, HeatingEstimate = 00:59:34.2898648, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:32:23.4842773, WeightEstimate = 02:33:41.9860165 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:20:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:07:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.0734093784001626;StartedAtUtc;00:10:25.7529854;08:22:59.9052285;08:12:34.1522431;False;408;0;0;00:00:00;02:33:41.9860165;02:33:41.9860165;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:11:39.8623783;00:00:00;02:00:00;00:10:25.7529854;00:59:34.2898648;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:32:23.4842773 [PrintingService.cs@1918] 07/30/2026 20:07:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=124.91666666666666,printChamber1=124.91666666666666,printChamber2=124.91666666666666,printChamber3=124.91666666666666,printChamber4=124.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:07:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 124.916664 with temperature 119.5 [HeaterCheck.cs@88] 07/30/2026 20:07:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.5 [HeaterCheck.cs@67] 07/30/2026 20:07:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 124.916664 with temperature 120 [HeaterCheck.cs@67] 07/30/2026 20:07:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 124.916664 with temperature 120 [HeaterCheck.cs@67] 07/30/2026 20:07:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.92856979370117 [HeaterCheck.cs@67] 07/30/2026 20:07:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=150.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:07:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 150.43287404378253. Used = 150.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:07:41 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=114.5,printChamber4=114.75 that are outside of set tolerance 10 for current step target 124.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:07:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.96428680419922 [HeaterCheck.cs@67] 07/30/2026 20:07:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=155197, estimate=40.309502532717644 for layer 30, Z=3.001 [PrintingService.cs@1524] 07/30/2026 20:07:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 26, island count 13 [PrintingService.cs@1569] 07/30/2026 20:07:42 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 31, start=0, count=408, Z=3.101 [PrintingService.cs@1518] 07/30/2026 20:07:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1759, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:07:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.92856979370117 [HeaterCheck.cs@67] 07/30/2026 20:07:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.96428680419922 [HeaterCheck.cs@67] 07/30/2026 20:07:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.17857360839844 [HeaterCheck.cs@67] 07/30/2026 20:07:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.17857360839844 [HeaterCheck.cs@67] 07/30/2026 20:07:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.92856979370117 [HeaterCheck.cs@67] 07/30/2026 20:07:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=151.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:07:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 151.43287404378253. Used = 151.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:07:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=152.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:07:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 152.43287404378253. Used = 152.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:07:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1227447 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:07:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:08:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=153.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:08:00 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 153.43287404378253. Used = 153.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:08:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.07142639160156 [HeaterCheck.cs@67] 07/30/2026 20:08:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 656.2304419, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.173747418366484, Elapsed = 00:10:56.2730973, TimeTotal = 08:23:10.8626437, Remaining = 08:12:14.5895464, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:33:52.9436265, WeightTotalEstimate = 02:33:52.9436265, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:11:50.8199883, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:56.2730973, HeatingEstimate = 00:59:03.7695581, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:32:34.4418873, WeightEstimate = 02:33:52.9436265 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:20:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:08:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.173747418366484;StartedAtUtc;00:10:56.2730973;08:23:10.8626437;08:12:14.5895464;False;408;0;0;00:00:00;02:33:52.9436265;02:33:52.9436265;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:11:50.8199883;00:00:00;02:00:00;00:10:56.2730973;00:59:03.7695581;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:32:34.4418873 [PrintingService.cs@1918] 07/30/2026 20:08:04 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=125.91666666666666,printChamber1=125.91666666666666,printChamber2=125.91666666666666,printChamber3=125.91666666666666,printChamber4=125.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:08:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.03571319580078 [HeaterCheck.cs@67] 07/30/2026 20:08:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=204452, estimate=37.71487983260948 for layer 31, Z=3.101 [PrintingService.cs@1524] 07/30/2026 20:08:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 27, island count 13 [PrintingService.cs@1569] 07/30/2026 20:08:04 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 32, start=0, count=408, Z=3.201 [PrintingService.cs@1518] 07/30/2026 20:08:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1783, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:08:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:08:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=154.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:08:08 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 154.43287404378253. Used = 154.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:08:11 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=115.32142639160156,printChamber1=115.75 that are outside of set tolerance 10 for current step target 125.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:08:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 664.7361406, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.198649957175373, Elapsed = 00:11:04.7787426, TimeTotal = 08:23:55.7699292, Remaining = 08:12:50.9911866, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:34:37.8509654, WeightTotalEstimate = 02:34:37.8509654, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:12:35.7273272, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:04.7787426, HeatingEstimate = 00:58:55.2638594, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:33:19.3492262, WeightEstimate = 02:34:37.8509654 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:21:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:08:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.198649957175373;StartedAtUtc;00:11:04.7787426;08:23:55.7699292;08:12:50.9911866;False;408;0;0;00:00:00;02:34:37.8509654;02:34:37.8509654;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:12:35.7273272;00:00:00;02:00:00;00:11:04.7787426;00:58:55.2638594;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:33:19.3492262 [PrintingService.cs@1918] 07/30/2026 20:08:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=126.91666666666666,printChamber1=126.91666666666666,printChamber2=126.91666666666666,printChamber3=126.91666666666666,printChamber4=126.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:08:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:08:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:08:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=155.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:08:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 155.43287404378253. Used = 155.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:08:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 57.5 [HeaterCheck.cs@111] 07/30/2026 20:08:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 126.916664 with temperature 122 [HeaterCheck.cs@67] 07/30/2026 20:08:20 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=116.5 that are outside of set tolerance 10 for current step target 126.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:08:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 673.2372741, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.2267662722617354, Elapsed = 00:11:13.2799281, TimeTotal = 08:23:55.7699812, Remaining = 08:12:42.4900531, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:34:37.8509654, WeightTotalEstimate = 02:34:37.8509654, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:12:35.7273272, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:13.2799281, HeatingEstimate = 00:58:46.7627259, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:33:19.3492262, WeightEstimate = 02:34:37.8509654 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:21:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:08:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2267662722617354;StartedAtUtc;00:11:13.2799281;08:23:55.7699812;08:12:42.4900531;False;408;0;0;00:00:00;02:34:37.8509654;02:34:37.8509654;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:12:35.7273272;00:00:00;02:00:00;00:11:13.2799281;00:58:46.7627259;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:33:19.3492262 [PrintingService.cs@1918] 07/30/2026 20:08:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=127.91666666666666,printChamber1=127.91666666666666,printChamber2=127.91666666666666,printChamber3=127.91666666666666,printChamber4=127.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:08:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=156.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:08:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 156.43287404378253. Used = 156.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:08:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 127.916664 with temperature 123 [HeaterCheck.cs@67] 07/30/2026 20:08:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 57.75 [HeaterCheck.cs@111] 07/30/2026 20:08:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=156976, estimate=40.71628449621316 for layer 32, Z=3.201 [PrintingService.cs@1524] 07/30/2026 20:08:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 28, island count 13 [PrintingService.cs@1569] 07/30/2026 20:08:26 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 33, start=0, count=408, Z=3.3009999 [PrintingService.cs@1518] 07/30/2026 20:08:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1793, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:08:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (493 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:08:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 127.916664 with temperature 123 [HeaterCheck.cs@67] 07/30/2026 20:08:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=117.25 that are outside of set tolerance 10 for current step target 127.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:08:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 127.916664 with temperature 122.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:08:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 681.7423472, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.2542307868292246, Elapsed = 00:11:21.7848344, TimeTotal = 08:24:04.6776250, Remaining = 08:12:42.8927906, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:34:46.7587760, WeightTotalEstimate = 02:34:46.7587760, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:12:44.6351378, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:21.7848344, HeatingEstimate = 00:58:38.2576528, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:33:28.2570368, WeightEstimate = 02:34:46.7587760 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:21:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:08:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.2542307868292246;StartedAtUtc;00:11:21.7848344;08:24:04.6776250;08:12:42.8927906;False;408;0;0;00:00:00;02:34:46.7587760;02:34:46.7587760;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:12:44.6351378;00:00:00;02:00:00;00:11:21.7848344;00:58:38.2576528;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:33:28.2570368 [PrintingService.cs@1918] 07/30/2026 20:08:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=128.91666666666666,printChamber1=128.91666666666666,printChamber2=128.91666666666666,printChamber3=128.91666666666666,printChamber4=128.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:08:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 128.91667 with temperature 123 [HeaterCheck.cs@88] 07/30/2026 20:08:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=157.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:08:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 157.43287404378253. Used = 157.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:08:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 128.91667 with temperature 123.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:08:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=52380, estimate=10.378220492535952 for layer 33, Z=3.3009999 [PrintingService.cs@1524] 07/30/2026 20:08:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 29, island count 8 [PrintingService.cs@1569] 07/30/2026 20:08:32 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 34, start=0, count=408, Z=3.401 [PrintingService.cs@1518] 07/30/2026 20:08:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1815, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:08:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 128.91667 with temperature 123.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:08:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 128.91667 with temperature 124 [HeaterCheck.cs@67] 07/30/2026 20:08:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 68.916664 with temperature 64.75 [HeaterCheck.cs@67] 07/30/2026 20:08:37 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=118 that are outside of set tolerance 10 for current step target 128.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:08:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=158.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:08:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 158.43287404378253. Used = 158.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:08:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=42729, estimate=13.291399059759643 for layer 34, Z=3.401 [PrintingService.cs@1524] 07/30/2026 20:08:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 30, island count 8 [PrintingService.cs@1569] 07/30/2026 20:08:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 35, start=0, count=408, Z=3.501 [PrintingService.cs@1518] 07/30/2026 20:08:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1888, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:08:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=54627, estimate=10.740244808661627 for layer 35, Z=3.501 [PrintingService.cs@1524] 07/30/2026 20:08:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 31, island count 8 [PrintingService.cs@1569] 07/30/2026 20:08:45 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 36, start=0, count=408, Z=3.601 [PrintingService.cs@1518] 07/30/2026 20:08:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1896, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:08:45 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=148.00411987304688 that are outside of set tolerance 10 for current step target 158.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:08:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=159.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:08:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 159.43287404378253. Used = 159.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:08:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 699.2457063, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.31211970598943, Elapsed = 00:11:39.2881939, TimeTotal = 08:24:04.4632122, Remaining = 08:12:25.1750183, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:34:46.5443628, WeightTotalEstimate = 02:34:46.5443628, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:12:44.4207246, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:11:39.2881939, HeatingEstimate = 00:58:20.7542937, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:33:28.0426236, WeightEstimate = 02:34:46.5443628 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:21:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:08:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.31211970598943;StartedAtUtc;00:11:39.2881939;08:24:04.4632122;08:12:25.1750183;False;408;0;0;00:00:00;02:34:46.5443628;02:34:46.5443628;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:12:44.4207246;00:00:00;02:00:00;00:11:39.2881939;00:58:20.7542937;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:33:28.0426236 [PrintingService.cs@1918] 07/30/2026 20:08:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=129.91666666666666,printChamber1=129.91666666666666,printChamber2=129.91666666666666,printChamber3=129.91666666666666,printChamber4=129.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:08:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=44533, estimate=13.66737830518472 for layer 36, Z=3.601 [PrintingService.cs@1524] 07/30/2026 20:08:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32, island count 8 [PrintingService.cs@1569] 07/30/2026 20:08:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 37, start=0, count=408, Z=3.701 [PrintingService.cs@1518] 07/30/2026 20:08:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1919, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:08:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=148.84902954101562 that are outside of set tolerance 10 for current step target 159.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:08:54 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0260018 ~ 6.01 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:08:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=119,printChamber2=119 that are outside of set tolerance 10 for current step target 129.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:08:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=160.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:08:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 160.43287404378253. Used = 160.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:08:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=56963, estimate=11.225650609482846 for layer 37, Z=3.701 [PrintingService.cs@1524] 07/30/2026 20:08:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 33, island count 8 [PrintingService.cs@1569] 07/30/2026 20:08:59 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 38, start=0, count=408, Z=3.8009999 [PrintingService.cs@1518] 07/30/2026 20:08:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1989, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:09:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=149.606201171875 that are outside of set tolerance 10 for current step target 160.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:09:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] no longer approaching new target of 129.91667 with temperature 120.75 [HeaterCheck.cs@111] 07/30/2026 20:09:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=46247, estimate=14.174774399810874 for layer 38, Z=3.8009999 [PrintingService.cs@1524] 07/30/2026 20:09:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 34, island count 8 [PrintingService.cs@1569] 07/30/2026 20:09:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 39, start=0, count=408, Z=3.901 [PrintingService.cs@1518] 07/30/2026 20:09:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1963, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:09:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=58994, estimate=11.558941126877329 for layer 39, Z=3.901 [PrintingService.cs@1524] 07/30/2026 20:09:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 35, island count 8 [PrintingService.cs@1569] 07/30/2026 20:09:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 40, start=0, count=408, Z=4.001 [PrintingService.cs@1518] 07/30/2026 20:09:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1947, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:09:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 129.91667 with temperature 125.25 [HeaterCheck.cs@67] 07/30/2026 20:09:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=47989, estimate=14.476346584900929 for layer 40, Z=4.001 [PrintingService.cs@1524] 07/30/2026 20:09:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 36, island count 8 [PrintingService.cs@1569] 07/30/2026 20:09:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 41, start=0, count=408, Z=4.101 [PrintingService.cs@1518] 07/30/2026 20:09:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2013, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:09:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 129.91667 with temperature 125 [HeaterCheck.cs@67] 07/30/2026 20:09:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 57 [HeaterCheck.cs@111] 07/30/2026 20:09:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 129.91667 with temperature 125 [HeaterCheck.cs@67] 07/30/2026 20:09:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 58.5 [HeaterCheck.cs@111] 07/30/2026 20:09:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 129.91667 with temperature 125 [HeaterCheck.cs@67] 07/30/2026 20:09:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=61425, estimate=12.151728178930188 for layer 41, Z=4.101 [PrintingService.cs@1524] 07/30/2026 20:09:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 37, island count 8 [PrintingService.cs@1569] 07/30/2026 20:09:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 42, start=0, count=408, Z=4.201 [PrintingService.cs@1518] 07/30/2026 20:09:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1986, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:09:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 129.91667 with temperature 125.25 [HeaterCheck.cs@67] 07/30/2026 20:09:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 62.75 [HeaterCheck.cs@111] 07/30/2026 20:09:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.03571319580078 [HeaterCheck.cs@67] 07/30/2026 20:09:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=49701, estimate=15.048753914347287 for layer 42, Z=4.201 [PrintingService.cs@1524] 07/30/2026 20:09:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 38, island count 8 [PrintingService.cs@1569] 07/30/2026 20:09:41 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 43, start=0, count=408, Z=4.301 [PrintingService.cs@1518] 07/30/2026 20:09:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2077, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:09:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.92856979370117 [HeaterCheck.cs@67] 07/30/2026 20:09:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.92856979370117 [HeaterCheck.cs@67] 07/30/2026 20:09:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:09:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.03571319580078 [HeaterCheck.cs@67] 07/30/2026 20:09:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.60713958740234 [HeaterCheck.cs@67] 07/30/2026 20:09:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.21428680419922 [HeaterCheck.cs@67] 07/30/2026 20:09:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=63707, estimate=12.485629337711414 for layer 43, Z=4.301 [PrintingService.cs@1524] 07/30/2026 20:09:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 39, island count 8 [PrintingService.cs@1569] 07/30/2026 20:09:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 44, start=0, count=408, Z=4.401 [PrintingService.cs@1518] 07/30/2026 20:09:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2071, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:09:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.28571319580078 [HeaterCheck.cs@67] 07/30/2026 20:09:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 129.91667 with temperature 125 [HeaterCheck.cs@67] 07/30/2026 20:09:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0504541 ~ 6.01 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:09:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.39286041259766 [HeaterCheck.cs@67] 07/30/2026 20:09:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.03571319580078 [HeaterCheck.cs@67] 07/30/2026 20:09:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 129.91667 with temperature 125 [HeaterCheck.cs@67] 07/30/2026 20:09:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.5 [HeaterCheck.cs@67] 07/30/2026 20:09:58 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/30/2026 20:09:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 129.91667 with temperature 125 [HeaterCheck.cs@67] 07/30/2026 20:09:59 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (563 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:09:59 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/30/2026 20:09:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/30/2026 20:09:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 20:09:59 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 20:09:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/30/2026 20:10:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 129.91667 with temperature 125 [HeaterCheck.cs@67] 07/30/2026 20:10:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 129.91667 with temperature 125.5 [HeaterCheck.cs@67] 07/30/2026 20:10:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.07142639160156 [HeaterCheck.cs@67] 07/30/2026 20:10:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:10:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 129.91667 with temperature 125.25 [HeaterCheck.cs@67] 07/30/2026 20:10:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=51417, estimate=15.47534943061224 for layer 44, Z=4.401 [PrintingService.cs@1524] 07/30/2026 20:10:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.17857360839844 [HeaterCheck.cs@67] 07/30/2026 20:10:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 40, island count 8 [PrintingService.cs@1569] 07/30/2026 20:10:02 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 45, start=0, count=408, Z=4.501 [PrintingService.cs@1518] 07/30/2026 20:10:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2121, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:10:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 129.91667 with temperature 125.5 [HeaterCheck.cs@67] 07/30/2026 20:10:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.35713958740234 [HeaterCheck.cs@67] 07/30/2026 20:10:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.21428680419922 [HeaterCheck.cs@67] 07/30/2026 20:10:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 129.91667 with temperature 125 [HeaterCheck.cs@67] 07/30/2026 20:10:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.17857360839844 [HeaterCheck.cs@67] 07/30/2026 20:10:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 129.91667 with temperature 125 [HeaterCheck.cs@67] 07/30/2026 20:10:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:10:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.92856979370117 [HeaterCheck.cs@67] 07/30/2026 20:10:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.07142639160156 [HeaterCheck.cs@67] 07/30/2026 20:10:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 129.91667 with temperature 125.25 [HeaterCheck.cs@67] 07/30/2026 20:10:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.32142639160156 [HeaterCheck.cs@67] 07/30/2026 20:10:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.28571319580078 [HeaterCheck.cs@67] 07/30/2026 20:10:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.25 [HeaterCheck.cs@67] 07/30/2026 20:10:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.96428680419922 [HeaterCheck.cs@67] 07/30/2026 20:10:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=65668, estimate=12.900355862450702 for layer 45, Z=4.501 [PrintingService.cs@1524] 07/30/2026 20:10:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 41, island count 8 [PrintingService.cs@1569] 07/30/2026 20:10:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 46, start=0, count=408, Z=4.601 [PrintingService.cs@1518] 07/30/2026 20:10:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2095, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:10:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.10713958740234 [HeaterCheck.cs@67] 07/30/2026 20:10:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 129.91667 with temperature 125.75 [HeaterCheck.cs@67] 07/30/2026 20:10:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.96428680419922 [HeaterCheck.cs@67] 07/30/2026 20:10:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] no longer approaching new target of 129.91667 with temperature 112 [HeaterCheck.cs@111] 07/30/2026 20:10:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64 [HeaterCheck.cs@67] 07/30/2026 20:10:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.03571319580078 [HeaterCheck.cs@67] 07/30/2026 20:10:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.14286041259766 [HeaterCheck.cs@67] 07/30/2026 20:10:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 64.28571319580078 [HeaterCheck.cs@67] 07/30/2026 20:10:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=53025, estimate=15.955685947315342 for layer 46, Z=4.601 [PrintingService.cs@1524] 07/30/2026 20:10:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 42, island count 8 [PrintingService.cs@1569] 07/30/2026 20:10:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 47, start=0, count=408, Z=4.701 [PrintingService.cs@1518] 07/30/2026 20:10:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2119, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:10:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.92856979370117 [HeaterCheck.cs@67] 07/30/2026 20:10:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.96428680419922 [HeaterCheck.cs@67] 07/30/2026 20:10:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=67808, estimate=13.193705460230923 for layer 47, Z=4.701 [PrintingService.cs@1524] 07/30/2026 20:10:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 43, island count 8 [PrintingService.cs@1569] 07/30/2026 20:10:25 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 48, start=0, count=408, Z=4.801 [PrintingService.cs@1518] 07/30/2026 20:10:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2107, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:10:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.92856979370117 [HeaterCheck.cs@67] 07/30/2026 20:10:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 68.916664 with temperature 63.92856979370117 [HeaterCheck.cs@67] 07/30/2026 20:10:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=54657, estimate=16.206245861229057 for layer 48, Z=4.801 [PrintingService.cs@1524] 07/30/2026 20:10:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 44, island count 8 [PrintingService.cs@1569] 07/30/2026 20:10:33 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 49, start=0, count=408, Z=4.901 [PrintingService.cs@1518] 07/30/2026 20:10:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2148, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:10:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 57.25 [HeaterCheck.cs@111] 07/30/2026 20:10:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 59 [HeaterCheck.cs@111] 07/30/2026 20:10:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] no longer approaching new target of 68.916664 with temperature 62.75 [HeaterCheck.cs@111] 07/30/2026 20:10:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=69.91666666666666,powderChamber1=69.91666666666666,powderChamber2=69.91666666666666,powderChamber3=69.91666666666666,powderChamber4=69.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:10:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=69986, estimate=13.694096372589417 for layer 49, Z=4.901 [PrintingService.cs@1524] 07/30/2026 20:10:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 45, island count 8 [PrintingService.cs@1569] 07/30/2026 20:10:41 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 50, start=0, count=408, Z=5.001 [PrintingService.cs@1518] 07/30/2026 20:10:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2090, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:10:45 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=59.25,powderChamber4=59.5 that are outside of set tolerance 10 for current step target 69.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:10:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=56238, estimate=16.67430972224055 for layer 50, Z=5.001 [PrintingService.cs@1524] 07/30/2026 20:10:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 46, island count 8 [PrintingService.cs@1569] 07/30/2026 20:10:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 51, start=0, count=408, Z=5.101 [PrintingService.cs@1518] 07/30/2026 20:10:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2158, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:10:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0192798 ~ 6.01 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:10:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.10713958740234 [HeaterCheck.cs@67] 07/30/2026 20:10:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.39286041259766 [HeaterCheck.cs@67] 07/30/2026 20:10:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.96428680419922 [HeaterCheck.cs@67] 07/30/2026 20:10:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.96428680419922 [HeaterCheck.cs@67] 07/30/2026 20:10:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:11:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.25 [HeaterCheck.cs@67] 07/30/2026 20:11:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:11:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.32142639160156 [HeaterCheck.cs@67] 07/30/2026 20:11:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.32142639160156 [HeaterCheck.cs@67] 07/30/2026 20:11:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=133416, estimate=24.90330104210487 for layer 51, Z=5.101 [PrintingService.cs@1524] 07/30/2026 20:11:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32, island count 10 [PrintingService.cs@1569] 07/30/2026 20:11:05 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 52, start=0, count=408, Z=5.201 [PrintingService.cs@1518] 07/30/2026 20:11:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2120, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:11:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65 [HeaterCheck.cs@67] 07/30/2026 20:11:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65 [HeaterCheck.cs@67] 07/30/2026 20:11:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.28571319580078 [HeaterCheck.cs@67] 07/30/2026 20:11:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.25 [HeaterCheck.cs@67] 07/30/2026 20:11:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.07142639160156 [HeaterCheck.cs@67] 07/30/2026 20:11:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.07142639160156 [HeaterCheck.cs@67] 07/30/2026 20:11:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65 [HeaterCheck.cs@67] 07/30/2026 20:11:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.10713958740234 [HeaterCheck.cs@67] 07/30/2026 20:11:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65 [HeaterCheck.cs@67] 07/30/2026 20:11:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.03571319580078 [HeaterCheck.cs@67] 07/30/2026 20:11:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.17857360839844 [HeaterCheck.cs@67] 07/30/2026 20:11:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:11:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=161.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:11:16 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 161.43287404378253. Used = 161.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:11:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=105065, estimate=28.199643155804214 for layer 52, Z=5.201 [PrintingService.cs@1524] 07/30/2026 20:11:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 33, island count 10 [PrintingService.cs@1569] 07/30/2026 20:11:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 53, start=0, count=408, Z=5.301 [PrintingService.cs@1518] 07/30/2026 20:11:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2090, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:11:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 853.7761364, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.8203548888409693, Elapsed = 00:14:13.8230255, TimeTotal = 08:24:33.6024065, Remaining = 08:10:19.7793810, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:15.6791556, WeightTotalEstimate = 02:35:15.6791556, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:13.5555174, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:13.8230255, HeatingEstimate = 00:55:46.2238636, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:33:57.1774164, WeightEstimate = 02:35:15.6791556 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:21:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:11:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8203548888409693;StartedAtUtc;00:14:13.8230255;08:24:33.6024065;08:10:19.7793810;False;408;0;0;00:00:00;02:35:15.6791556;02:35:15.6791556;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:13.5555174;00:00:00;02:00:00;00:14:13.8230255;00:55:46.2238636;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:33:57.1774164 [PrintingService.cs@1918] 07/30/2026 20:11:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=130.91666666666666,printChamber1=130.91666666666666,printChamber2=130.91666666666666,printChamber3=130.91666666666666,printChamber4=130.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:11:24 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=150.4665069580078 that are outside of set tolerance 10 for current step target 161.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:11:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.28571319580078 [HeaterCheck.cs@67] 07/30/2026 20:11:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.10713958740234 [HeaterCheck.cs@67] 07/30/2026 20:11:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.03571319580078 [HeaterCheck.cs@67] 07/30/2026 20:11:29 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=120.25 that are outside of set tolerance 10 for current step target 130.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:11:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 862.2955102, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.8484820510445914, Elapsed = 00:14:22.3380056, TimeTotal = 08:24:33.5980128, Remaining = 08:10:11.2600072, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:15.6791556, WeightTotalEstimate = 02:35:15.6791556, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:13.5555174, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:22.3380056, HeatingEstimate = 00:55:37.7044898, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:33:57.1774164, WeightEstimate = 02:35:15.6791556 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:21:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:11:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8484820510445914;StartedAtUtc;00:14:22.3380056;08:24:33.5980128;08:10:11.2600072;False;408;0;0;00:00:00;02:35:15.6791556;02:35:15.6791556;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:13.5555174;00:00:00;02:00:00;00:14:22.3380056;00:55:37.7044898;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:33:57.1774164 [PrintingService.cs@1918] 07/30/2026 20:11:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=131.91666666666666,printChamber1=131.91666666666666,printChamber2=131.91666666666666,printChamber3=131.91666666666666,printChamber4=131.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:11:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 131.91667 with temperature 126 [HeaterCheck.cs@88] 07/30/2026 20:11:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 131.91667 with temperature 126.5 [HeaterCheck.cs@88] 07/30/2026 20:11:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 131.91667 with temperature 127.75 [HeaterCheck.cs@67] 07/30/2026 20:11:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 131.91667 with temperature 127 [HeaterCheck.cs@67] 07/30/2026 20:11:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=162.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:11:32 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 162.43287404378253. Used = 162.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:11:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 131.91667 with temperature 127.25 [HeaterCheck.cs@67] 07/30/2026 20:11:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 131.91667 with temperature 127 [HeaterCheck.cs@67] 07/30/2026 20:11:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 131.91667 with temperature 127 [HeaterCheck.cs@67] 07/30/2026 20:11:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 131.91667 with temperature 127.75 [HeaterCheck.cs@67] 07/30/2026 20:11:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 131.91667 with temperature 127.5 [HeaterCheck.cs@67] 07/30/2026 20:11:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 131.91667 with temperature 127 [HeaterCheck.cs@67] 07/30/2026 20:11:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 69.916664 with temperature 57.75 [HeaterCheck.cs@111] 07/30/2026 20:11:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 869.7981659, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.8732661907044386, Elapsed = 00:14:29.8410681, TimeTotal = 08:24:33.5984196, Remaining = 08:10:03.7573515, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:15.6791556, WeightTotalEstimate = 02:35:15.6791556, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:13.5555174, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:29.8410681, HeatingEstimate = 00:55:30.2018341, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:33:57.1774164, WeightEstimate = 02:35:15.6791556 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:21:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:11:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8732661907044386;StartedAtUtc;00:14:29.8410681;08:24:33.5984196;08:10:03.7573515;False;408;0;0;00:00:00;02:35:15.6791556;02:35:15.6791556;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:13.5555174;00:00:00;02:00:00;00:14:29.8410681;00:55:30.2018341;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:33:57.1774164 [PrintingService.cs@1918] 07/30/2026 20:11:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=132.91666666666666,printChamber1=132.91666666666666,printChamber2=132.91666666666666,printChamber3=132.91666666666666,printChamber4=132.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:11:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 132.91667 with temperature 127.25 [HeaterCheck.cs@88] 07/30/2026 20:11:39 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=151.45242309570312 that are outside of set tolerance 10 for current step target 162.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:11:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=135542, estimate=25.42497210425261 for layer 53, Z=5.301 [PrintingService.cs@1524] 07/30/2026 20:11:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 34, island count 10 [PrintingService.cs@1569] 07/30/2026 20:11:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 54, start=0, count=408, Z=5.401 [PrintingService.cs@1518] 07/30/2026 20:11:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2104, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:11:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 132.91667 with temperature 128 [HeaterCheck.cs@67] 07/30/2026 20:11:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=163.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:11:42 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 163.43287404378253. Used = 163.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:11:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 132.91667 with temperature 128.5 [HeaterCheck.cs@67] 07/30/2026 20:11:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 877.2983033, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.897370396350725, Elapsed = 00:14:37.3408371, TimeTotal = 08:24:40.5895375, Remaining = 08:10:03.2487004, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:22.6706419, WeightTotalEstimate = 02:35:22.6706419, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:20.5470037, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:37.3408371, HeatingEstimate = 00:55:22.7016967, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:04.1689027, WeightEstimate = 02:35:22.6706419 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:21:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:11:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.897370396350725;StartedAtUtc;00:14:37.3408371;08:24:40.5895375;08:10:03.2487004;False;408;0;0;00:00:00;02:35:22.6706419;02:35:22.6706419;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:20.5470037;00:00:00;02:00:00;00:14:37.3408371;00:55:22.7016967;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:04.1689027 [PrintingService.cs@1918] 07/30/2026 20:11:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=133.91666666666666,printChamber1=133.91666666666666,printChamber2=133.91666666666666,printChamber3=133.91666666666666,printChamber4=133.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:11:50 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=153.2979736328125 that are outside of set tolerance 10 for current step target 163.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:11:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 884.7974304, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 2.922136256787889, Elapsed = 00:14:44.8400893, TimeTotal = 08:24:40.5896626, Remaining = 08:09:55.7495733, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:22.6706419, WeightTotalEstimate = 02:35:22.6706419, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:20.5470037, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:44.8400893, HeatingEstimate = 00:55:15.2025696, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:04.1689027, WeightEstimate = 02:35:22.6706419 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:21:48. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:11:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.922136256787889;StartedAtUtc;00:14:44.8400893;08:24:40.5896626;08:09:55.7495733;False;408;0;0;00:00:00;02:35:22.6706419;02:35:22.6706419;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:20.5470037;00:00:00;02:00:00;00:14:44.8400893;00:55:15.2025696;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:04.1689027 [PrintingService.cs@1918] 07/30/2026 20:11:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=134.91666666666666,printChamber1=134.91666666666666,printChamber2=134.91666666666666,printChamber3=134.91666666666666,printChamber4=134.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:11:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 134.91667 with temperature 129.57142639160156 [HeaterCheck.cs@88] 07/30/2026 20:11:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.91667 with temperature 130 [HeaterCheck.cs@67] 07/30/2026 20:11:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1178575 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:11:57 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (334 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:11:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.91667 with temperature 129.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:11:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.91667 with temperature 129.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:11:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=106552, estimate=28.62455149449383 for layer 54, Z=5.401 [PrintingService.cs@1524] 07/30/2026 20:11:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 35, island count 10 [PrintingService.cs@1569] 07/30/2026 20:11:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 55, start=0, count=408, Z=5.501 [PrintingService.cs@1518] 07/30/2026 20:11:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2062, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:12:00 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=124.75 that are outside of set tolerance 10 for current step target 134.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:12:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=164.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:12:03 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 164.43287404378253. Used = 164.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:12:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.91667 with temperature 129.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:12:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] no longer approaching new target of 69.916664 with temperature 63 [HeaterCheck.cs@111] 07/30/2026 20:12:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.91667 with temperature 130 [HeaterCheck.cs@67] 07/30/2026 20:12:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.91667 with temperature 130.14285278320312 [HeaterCheck.cs@67] 07/30/2026 20:12:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 69.916664 with temperature 60.5 [HeaterCheck.cs@111] 07/30/2026 20:12:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.91667 with temperature 129.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:12:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.91667 with temperature 130.0357208251953 [HeaterCheck.cs@67] 07/30/2026 20:12:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.91667 with temperature 130.0357208251953 [HeaterCheck.cs@67] 07/30/2026 20:12:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.91667 with temperature 129.9642791748047 [HeaterCheck.cs@67] 07/30/2026 20:12:10 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=154.4097900390625 that are outside of set tolerance 10 for current step target 164.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:12:12 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=165.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:12:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 165.43287404378253. Used = 165.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:12:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=137348, estimate=25.630898096296157 for layer 55, Z=5.501 [PrintingService.cs@1524] 07/30/2026 20:12:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 36, island count 10 [PrintingService.cs@1569] 07/30/2026 20:12:13 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 56, start=0, count=408, Z=5.601 [PrintingService.cs@1518] 07/30/2026 20:12:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 134.91667 with temperature 130.0357208251953 [HeaterCheck.cs@67] 07/30/2026 20:12:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2029, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:12:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 134.91667 with temperature 130 [HeaterCheck.cs@67] 07/30/2026 20:12:20 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=154.88978576660156 that are outside of set tolerance 10 for current step target 165.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:12:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 134.91667 with temperature 130 [HeaterCheck.cs@67] 07/30/2026 20:12:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=166.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:12:22 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 166.43287404378253. Used = 166.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:12:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 69.916664 with temperature 62.5 [HeaterCheck.cs@111] 07/30/2026 20:12:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=107966, estimate=28.875790664965734 for layer 56, Z=5.601 [PrintingService.cs@1524] 07/30/2026 20:12:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 37, island count 10 [PrintingService.cs@1569] 07/30/2026 20:12:28 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 57, start=0, count=408, Z=5.701 [PrintingService.cs@1518] 07/30/2026 20:12:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2153, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:12:29 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=155.70249938964844 that are outside of set tolerance 10 for current step target 166.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:12:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=167.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:12:30 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 167.43287404378253. Used = 167.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:12:38 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=156.4473114013672 that are outside of set tolerance 10 for current step target 167.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:12:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=168.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:12:45 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 168.43287404378253. Used = 168.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:12:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=139296, estimate=26.089224802456123 for layer 57, Z=5.701 [PrintingService.cs@1524] 07/30/2026 20:12:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32, island count 12 [PrintingService.cs@1569] 07/30/2026 20:12:46 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 58, start=0, count=408, Z=5.801 [PrintingService.cs@1518] 07/30/2026 20:12:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2219, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:12:52 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=157.5137939453125 that are outside of set tolerance 10 for current step target 168.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:12:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:12:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.35713958740234 [HeaterCheck.cs@67] 07/30/2026 20:12:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] no longer approaching new target of 134.91667 with temperature 124.25 [HeaterCheck.cs@111] 07/30/2026 20:12:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.14286041259766 [HeaterCheck.cs@67] 07/30/2026 20:12:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=169.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:12:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 169.43287404378253. Used = 169.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:12:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0860261 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:12:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:12:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.10713958740234 [HeaterCheck.cs@67] 07/30/2026 20:12:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.17857360839844 [HeaterCheck.cs@67] 07/30/2026 20:12:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:12:57 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (630 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:12:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 69.916664 with temperature 65.25 [HeaterCheck.cs@67] 07/30/2026 20:12:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] no longer approaching new target of 134.91667 with temperature 127.25 [HeaterCheck.cs@111] 07/30/2026 20:12:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.14286041259766 [HeaterCheck.cs@67] 07/30/2026 20:12:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 69.916664 with temperature 58.5 [HeaterCheck.cs@111] 07/30/2026 20:13:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.03571319580078 [HeaterCheck.cs@67] 07/30/2026 20:13:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:13:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=109499, estimate=29.701095755712352 for layer 58, Z=5.801 [PrintingService.cs@1524] 07/30/2026 20:13:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 33, island count 12 [PrintingService.cs@1569] 07/30/2026 20:13:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 59, start=0, count=408, Z=5.901 [PrintingService.cs@1518] 07/30/2026 20:13:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2205, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:13:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 953.3173817, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 3.1463599651158733, Elapsed = 00:15:53.3598715, TimeTotal = 08:25:00.4068851, Remaining = 08:09:07.0470136, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:42.4880335, WeightTotalEstimate = 02:35:42.4880335, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:40.3643953, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:15:53.3598715, HeatingEstimate = 00:54:06.6826183, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:23.9862943, WeightEstimate = 02:35:42.4880335 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:22:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:13:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1463599651158733;StartedAtUtc;00:15:53.3598715;08:25:00.4068851;08:09:07.0470136;False;408;0;0;00:00:00;02:35:42.4880335;02:35:42.4880335;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:40.3643953;00:00:00;02:00:00;00:15:53.3598715;00:54:06.6826183;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:23.9862943 [PrintingService.cs@1918] 07/30/2026 20:13:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=135.91666666666666,printChamber1=135.91666666666666,printChamber2=135.91666666666666,printChamber3=135.91666666666666,printChamber4=135.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:13:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.10713958740234 [HeaterCheck.cs@67] 07/30/2026 20:13:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.96428680419922 [HeaterCheck.cs@67] 07/30/2026 20:13:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=158.4357147216797 that are outside of set tolerance 10 for current step target 169.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:13:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.03571319580078 [HeaterCheck.cs@67] 07/30/2026 20:13:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.35713958740234 [HeaterCheck.cs@67] 07/30/2026 20:13:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.92857360839844 [HeaterCheck.cs@67] 07/30/2026 20:13:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.10713958740234 [HeaterCheck.cs@67] 07/30/2026 20:13:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.42857360839844 [HeaterCheck.cs@67] 07/30/2026 20:13:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.21428680419922 [HeaterCheck.cs@67] 07/30/2026 20:13:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.39286041259766 [HeaterCheck.cs@67] 07/30/2026 20:13:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=170.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:13:06 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 170.43287404378253. Used = 170.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:13:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.35713958740234 [HeaterCheck.cs@67] 07/30/2026 20:13:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65 [HeaterCheck.cs@67] 07/30/2026 20:13:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 64.96428680419922 [HeaterCheck.cs@67] 07/30/2026 20:13:09 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=125 that are outside of set tolerance 10 for current step target 135.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:13:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.42857360839844 [HeaterCheck.cs@67] 07/30/2026 20:13:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65 [HeaterCheck.cs@67] 07/30/2026 20:13:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 961.818757, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 3.1744169495121337, Elapsed = 00:16:01.8612521, TimeTotal = 08:25:00.4068904, Remaining = 08:08:58.5456383, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:42.4880335, WeightTotalEstimate = 02:35:42.4880335, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:40.3643953, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:01.8612521, HeatingEstimate = 00:53:58.1812430, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:23.9862943, WeightEstimate = 02:35:42.4880335 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:22:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:13:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.1744169495121337;StartedAtUtc;00:16:01.8612521;08:25:00.4068904;08:08:58.5456383;False;408;0;0;00:00:00;02:35:42.4880335;02:35:42.4880335;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:40.3643953;00:00:00;02:00:00;00:16:01.8612521;00:53:58.1812430;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:23.9862943 [PrintingService.cs@1918] 07/30/2026 20:13:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=136.91666666666666,printChamber1=136.91666666666666,printChamber2=136.91666666666666,printChamber3=136.91666666666666,printChamber4=136.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:13:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.17857360839844 [HeaterCheck.cs@67] 07/30/2026 20:13:13 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=159.43540954589844 that are outside of set tolerance 10 for current step target 170.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:13:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.14286041259766 [HeaterCheck.cs@67] 07/30/2026 20:13:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 69.916664 with temperature 60.75 [HeaterCheck.cs@111] 07/30/2026 20:13:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=142183, estimate=26.647868049616786 for layer 59, Z=5.901 [PrintingService.cs@1524] 07/30/2026 20:13:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 34, island count 12 [PrintingService.cs@1569] 07/30/2026 20:13:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 60, start=0, count=408, Z=6.001 [PrintingService.cs@1518] 07/30/2026 20:13:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2321, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:13:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65 [HeaterCheck.cs@67] 07/30/2026 20:13:17 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=126.75 that are outside of set tolerance 10 for current step target 136.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:13:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.28571319580078 [HeaterCheck.cs@67] 07/30/2026 20:13:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.03571319580078 [HeaterCheck.cs@67] 07/30/2026 20:13:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 970.3217089, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 3.2024185096375772, Elapsed = 00:16:10.3642949, TimeTotal = 08:25:00.9832094, Remaining = 08:08:50.6189145, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:43.0642616, WeightTotalEstimate = 02:35:43.0642616, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:40.9406234, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:10.3642949, HeatingEstimate = 00:53:49.6782911, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:24.5625224, WeightEstimate = 02:35:43.0642616 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:22:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:13:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2024185096375772;StartedAtUtc;00:16:10.3642949;08:25:00.9832094;08:08:50.6189145;False;408;0;0;00:00:00;02:35:43.0642616;02:35:43.0642616;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:40.9406234;00:00:00;02:00:00;00:16:10.3642949;00:53:49.6782911;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:24.5625224 [PrintingService.cs@1918] 07/30/2026 20:13:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=137.91666666666666,printChamber1=137.91666666666666,printChamber2=137.91666666666666,printChamber3=137.91666666666666,printChamber4=137.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:13:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.32142639160156 [HeaterCheck.cs@67] 07/30/2026 20:13:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 137.91667 with temperature 133 [HeaterCheck.cs@67] 07/30/2026 20:13:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=171.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:13:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 171.43287404378253. Used = 171.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:13:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.10713958740234 [HeaterCheck.cs@67] 07/30/2026 20:13:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 69.916664 with temperature 65.07142639160156 [HeaterCheck.cs@67] 07/30/2026 20:13:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 137.91667 with temperature 133 [HeaterCheck.cs@67] 07/30/2026 20:13:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 977.8208713, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 3.227167813149328, Elapsed = 00:16:17.8635812, TimeTotal = 08:25:00.9833333, Remaining = 08:08:43.1197521, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:43.0642616, WeightTotalEstimate = 02:35:43.0642616, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:40.9406234, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:17.8635812, HeatingEstimate = 00:53:42.1791287, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:24.5625224, WeightEstimate = 02:35:43.0642616 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:22:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:13:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.227167813149328;StartedAtUtc;00:16:17.8635812;08:25:00.9833333;08:08:43.1197521;False;408;0;0;00:00:00;02:35:43.0642616;02:35:43.0642616;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:40.9406234;00:00:00;02:00:00;00:16:17.8635812;00:53:42.1791287;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:24.5625224 [PrintingService.cs@1918] 07/30/2026 20:13:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=138.91666666666666,printChamber1=138.91666666666666,printChamber2=138.91666666666666,printChamber3=138.91666666666666,printChamber4=138.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:13:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=160.43997192382812 that are outside of set tolerance 10 for current step target 171.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:13:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 138.91667 with temperature 134.25 [HeaterCheck.cs@67] 07/30/2026 20:13:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=111720, estimate=30.42397008654809 for layer 60, Z=6.001 [PrintingService.cs@1524] 07/30/2026 20:13:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 35, island count 12 [PrintingService.cs@1569] 07/30/2026 20:13:32 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 61, start=0, count=408, Z=6.101 [PrintingService.cs@1518] 07/30/2026 20:13:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2283, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:13:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 138.91667 with temperature 134.25 [HeaterCheck.cs@67] 07/30/2026 20:13:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 985.3235047, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 3.2513896720702804, Elapsed = 00:16:25.3664035, TimeTotal = 08:25:06.0076731, Remaining = 08:08:40.6412696, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:48.0884125, WeightTotalEstimate = 02:35:48.0884125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:45.9647743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:25.3664035, HeatingEstimate = 00:53:34.6764953, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:29.5866733, WeightEstimate = 02:35:48.0884125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:22:14. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:13:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2513896720702804;StartedAtUtc;00:16:25.3664035;08:25:06.0076731;08:08:40.6412696;False;408;0;0;00:00:00;02:35:48.0884125;02:35:48.0884125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:45.9647743;00:00:00;02:00:00;00:16:25.3664035;00:53:34.6764953;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:29.5866733 [PrintingService.cs@1918] 07/30/2026 20:13:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=139.91666666666666,printChamber1=139.91666666666666,printChamber2=139.91666666666666,printChamber3=139.91666666666666,printChamber4=139.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:13:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 139.91667 with temperature 133.5 [HeaterCheck.cs@88] 07/30/2026 20:13:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 139.91667 with temperature 135 [HeaterCheck.cs@67] 07/30/2026 20:13:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 139.91667 with temperature 136 [HeaterCheck.cs@67] 07/30/2026 20:13:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 139.91667 with temperature 135 [HeaterCheck.cs@67] 07/30/2026 20:13:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=172.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:13:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 172.43287404378253. Used = 172.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:13:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 992.8245861, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 3.2761395379268947, Elapsed = 00:16:32.8670867, TimeTotal = 08:25:06.0072749, Remaining = 08:08:33.1401882, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:48.0884125, WeightTotalEstimate = 02:35:48.0884125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:45.9647743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:32.8670867, HeatingEstimate = 00:53:27.1754139, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:29.5866733, WeightEstimate = 02:35:48.0884125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:22:14. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:13:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.2761395379268947;StartedAtUtc;00:16:32.8670867;08:25:06.0072749;08:08:33.1401882;False;408;0;0;00:00:00;02:35:48.0884125;02:35:48.0884125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:45.9647743;00:00:00;02:00:00;00:16:32.8670867;00:53:27.1754139;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:29.5866733 [PrintingService.cs@1918] 07/30/2026 20:13:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=140.91666666666666,printChamber1=140.91666666666666,printChamber2=140.91666666666666,printChamber3=140.91666666666666,printChamber4=140.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:13:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 140.91667 with temperature 135.25 [HeaterCheck.cs@88] 07/30/2026 20:13:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 140.91667 with temperature 136 [HeaterCheck.cs@67] 07/30/2026 20:13:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 140.91667 with temperature 136.25 [HeaterCheck.cs@67] 07/30/2026 20:13:46 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=161.46156311035156 that are outside of set tolerance 10 for current step target 172.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:13:48 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=130.25,printChamber3=129.25 that are outside of set tolerance 10 for current step target 140.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:13:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=144440, estimate=27.225788270075693 for layer 61, Z=6.101 [PrintingService.cs@1524] 07/30/2026 20:13:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 36, island count 12 [PrintingService.cs@1569] 07/30/2026 20:13:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 62, start=0, count=408, Z=6.201 [PrintingService.cs@1518] 07/30/2026 20:13:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2387, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:13:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=173.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:13:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 173.43287404378253. Used = 173.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:13:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1200203 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:13:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 140.91667 with temperature 136 [HeaterCheck.cs@67] 07/30/2026 20:13:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 140.91667 with temperature 136.75 [HeaterCheck.cs@67] 07/30/2026 20:14:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 69.916664 with temperature 58 [HeaterCheck.cs@111] 07/30/2026 20:14:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=162.44924926757812 that are outside of set tolerance 10 for current step target 173.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:14:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=113711, estimate=31.371744204541265 for layer 62, Z=6.201 [PrintingService.cs@1524] 07/30/2026 20:14:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 37, island count 12 [PrintingService.cs@1569] 07/30/2026 20:14:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 63, start=0, count=408, Z=6.301 [PrintingService.cs@1518] 07/30/2026 20:14:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2461, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:14:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] no longer approaching new target of 69.916664 with temperature 64 [HeaterCheck.cs@111] 07/30/2026 20:14:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=174.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:14:20 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 174.43287404378253. Used = 174.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:14:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 69.916664 with temperature 61.25 [HeaterCheck.cs@111] 07/30/2026 20:14:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 69.916664 with temperature 62.46428680419922 [HeaterCheck.cs@111] 07/30/2026 20:14:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (479 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:14:27 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=163.46881103515625 that are outside of set tolerance 10 for current step target 174.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:14:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=70.91666666666666,powderChamber1=70.91666666666666,powderChamber2=70.91666666666666,powderChamber3=70.91666666666666,powderChamber4=70.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:14:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=146800, estimate=27.51749610418627 for layer 63, Z=6.301 [PrintingService.cs@1524] 07/30/2026 20:14:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 38, island count 12 [PrintingService.cs@1569] 07/30/2026 20:14:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 64, start=0, count=408, Z=6.401 [PrintingService.cs@1518] 07/30/2026 20:14:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2458, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:14:36 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=60.5 that are outside of set tolerance 10 for current step target 70.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:14:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=175.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:14:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 175.43287404378253. Used = 175.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:14:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=164.4800567626953 that are outside of set tolerance 10 for current step target 175.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:14:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=115465, estimate=32.156820059353564 for layer 64, Z=6.401 [PrintingService.cs@1524] 07/30/2026 20:14:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 39, island count 12 [PrintingService.cs@1569] 07/30/2026 20:14:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 65, start=0, count=408, Z=6.501 [PrintingService.cs@1518] 07/30/2026 20:14:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2511, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:14:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0322676 ~ 6.01 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:14:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=176.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:14:57 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 176.43287404378253. Used = 176.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:14:58 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/30/2026 20:14:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/30/2026 20:14:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 20:14:59 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/30/2026 20:14:59 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 20:14:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/30/2026 20:15:04 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=165.47264099121094 that are outside of set tolerance 10 for current step target 176.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:15:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=149162, estimate=28.098118680902544 for layer 65, Z=6.501 [PrintingService.cs@1524] 07/30/2026 20:15:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 40, island count 12 [PrintingService.cs@1569] 07/30/2026 20:15:05 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 66, start=0, count=408, Z=6.601 [PrintingService.cs@1518] 07/30/2026 20:15:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2533, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:15:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66 [HeaterCheck.cs@67] 07/30/2026 20:15:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=177.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:15:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 177.43287404378253. Used = 177.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:15:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1093.3544112, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 3.6068892889897857, Elapsed = 00:18:13.3970213, TimeTotal = 08:25:14.1275957, Remaining = 08:07:00.7305744, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:35:56.2086238, WeightTotalEstimate = 02:35:56.2086238, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:13:54.0849856, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:13.3970213, HeatingEstimate = 00:51:46.6455888, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:37.7068846, WeightEstimate = 02:35:56.2086238 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:22:22. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:15:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.6068892889897857;StartedAtUtc;00:18:13.3970213;08:25:14.1275957;08:07:00.7305744;False;408;0;0;00:00:00;02:35:56.2086238;02:35:56.2086238;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:13:54.0849856;00:00:00;02:00:00;00:18:13.3970213;00:51:46.6455888;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:37.7068846 [PrintingService.cs@1918] 07/30/2026 20:15:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=141.91666666666666,printChamber1=141.91666666666666,printChamber2=141.91666666666666,printChamber3=141.91666666666666,printChamber4=141.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:15:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=117196, estimate=33.051205823972964 for layer 66, Z=6.601 [PrintingService.cs@1524] 07/30/2026 20:15:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 41, island count 12 [PrintingService.cs@1569] 07/30/2026 20:15:21 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 67, start=0, count=408, Z=6.701 [PrintingService.cs@1518] 07/30/2026 20:15:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2549, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:15:23 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=166.48667907714844 that are outside of set tolerance 10 for current step target 177.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:15:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (492 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:15:29 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=131.25 that are outside of set tolerance 10 for current step target 141.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:15:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 70.916664 with temperature 58 [HeaterCheck.cs@111] 07/30/2026 20:15:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1101.8668672, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 3.6337369484322286, Elapsed = 00:18:21.9093943, TimeTotal = 08:25:24.4128548, Remaining = 08:07:02.5034605, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:36:06.4939659, WeightTotalEstimate = 02:36:06.4939659, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:14:04.3703277, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:21.9093943, HeatingEstimate = 00:51:38.1331328, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:47.9922267, WeightEstimate = 02:36:06.4939659 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:22:32. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:15:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.6337369484322286;StartedAtUtc;00:18:21.9093943;08:25:24.4128548;08:07:02.5034605;False;408;0;0;00:00:00;02:36:06.4939659;02:36:06.4939659;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:14:04.3703277;00:00:00;02:00:00;00:18:21.9093943;00:51:38.1331328;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:47.9922267 [PrintingService.cs@1918] 07/30/2026 20:15:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=142.91666666666666,printChamber1=142.91666666666666,printChamber2=142.91666666666666,printChamber3=142.91666666666666,printChamber4=142.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:15:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 142.91667 with temperature 137.25 [HeaterCheck.cs@88] 07/30/2026 20:15:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 70.916664 with temperature 62.25 [HeaterCheck.cs@111] 07/30/2026 20:15:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=178.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:15:36 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 178.43287404378253. Used = 178.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:15:37 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=132.25 that are outside of set tolerance 10 for current step target 142.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:15:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1110.3769246, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 3.6618003064191864, Elapsed = 00:18:30.4194425, TimeTotal = 08:25:24.4128456, Remaining = 08:06:53.9934031, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:36:06.4939659, WeightTotalEstimate = 02:36:06.4939659, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:14:04.3703277, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:30.4194425, HeatingEstimate = 00:51:29.6230754, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:47.9922267, WeightEstimate = 02:36:06.4939659 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:22:32. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:15:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.6618003064191864;StartedAtUtc;00:18:30.4194425;08:25:24.4128456;08:06:53.9934031;False;408;0;0;00:00:00;02:36:06.4939659;02:36:06.4939659;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:14:04.3703277;00:00:00;02:00:00;00:18:30.4194425;00:51:29.6230754;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:47.9922267 [PrintingService.cs@1918] 07/30/2026 20:15:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=143.91666666666666,printChamber1=143.91666666666666,printChamber2=143.91666666666666,printChamber3=143.91666666666666,printChamber4=143.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:15:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=151703, estimate=28.49554649712347 for layer 67, Z=6.701 [PrintingService.cs@1524] 07/30/2026 20:15:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 42, island count 12 [PrintingService.cs@1569] 07/30/2026 20:15:43 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 68, start=0, count=408, Z=6.801 [PrintingService.cs@1518] 07/30/2026 20:15:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2583, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:15:43 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=167.52877807617188 that are outside of set tolerance 10 for current step target 178.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:15:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66.25 [HeaterCheck.cs@67] 07/30/2026 20:15:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 143.91667 with temperature 139 [HeaterCheck.cs@67] 07/30/2026 20:15:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1117.8796889, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 3.6865442536000868, Elapsed = 00:18:37.9229257, TimeTotal = 08:25:24.4135645, Remaining = 08:06:46.4906388, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:36:06.4939659, WeightTotalEstimate = 02:36:06.4939659, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:14:04.3703277, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:37.9229257, HeatingEstimate = 00:51:22.1203111, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:34:47.9922267, WeightEstimate = 02:36:06.4939659 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:22:32. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:15:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.6865442536000868;StartedAtUtc;00:18:37.9229257;08:25:24.4135645;08:06:46.4906388;False;408;0;0;00:00:00;02:36:06.4939659;02:36:06.4939659;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:14:04.3703277;00:00:00;02:00:00;00:18:37.9229257;00:51:22.1203111;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:34:47.9922267 [PrintingService.cs@1918] 07/30/2026 20:15:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=144.91666666666666,printChamber1=144.91666666666666,printChamber2=144.91666666666666,printChamber3=144.91666666666666,printChamber4=144.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:15:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 144.91667 with temperature 139.25 [HeaterCheck.cs@88] 07/30/2026 20:15:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 144.91667 with temperature 140.25 [HeaterCheck.cs@67] 07/30/2026 20:15:53 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=133.75 that are outside of set tolerance 10 for current step target 144.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:15:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0331440 ~ 6.01 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:15:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=179.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:15:57 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 179.43287404378253. Used = 179.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:16:05 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=168.5154266357422 that are outside of set tolerance 10 for current step target 179.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:16:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=119325, estimate=33.881287335855035 for layer 68, Z=6.801 [PrintingService.cs@1524] 07/30/2026 20:16:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 43, island count 12 [PrintingService.cs@1569] 07/30/2026 20:16:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 69, start=0, count=408, Z=6.901 [PrintingService.cs@1518] 07/30/2026 20:16:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2695, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:16:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 70.916664 with temperature 62.46428680419922 [HeaterCheck.cs@111] 07/30/2026 20:16:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.91667 with temperature 140.25 [HeaterCheck.cs@67] 07/30/2026 20:16:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.91667 with temperature 142 [HeaterCheck.cs@67] 07/30/2026 20:16:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.91667 with temperature 140 [HeaterCheck.cs@67] 07/30/2026 20:16:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66 [HeaterCheck.cs@67] 07/30/2026 20:16:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.91667 with temperature 140 [HeaterCheck.cs@67] 07/30/2026 20:16:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.91667 with temperature 140.25 [HeaterCheck.cs@67] 07/30/2026 20:16:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.91667 with temperature 140.5 [HeaterCheck.cs@67] 07/30/2026 20:16:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=180.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:16:21 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 180.43287404378253. Used = 180.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:16:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=154734, estimate=29.307055721580646 for layer 69, Z=6.901 [PrintingService.cs@1524] 07/30/2026 20:16:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32, island count 14 [PrintingService.cs@1569] 07/30/2026 20:16:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 70, start=0, count=408, Z=7.001 [PrintingService.cs@1518] 07/30/2026 20:16:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2852, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:16:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (294 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:16:28 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=169.55447387695312 that are outside of set tolerance 10 for current step target 180.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:16:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] no longer approaching new target of 144.91667 with temperature 130.75 [HeaterCheck.cs@111] 07/30/2026 20:16:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 70.916664 with temperature 59 [HeaterCheck.cs@111] 07/30/2026 20:16:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=122418, estimate=34.8343123412073 for layer 70, Z=7.001 [PrintingService.cs@1524] 07/30/2026 20:16:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 33, island count 14 [PrintingService.cs@1569] 07/30/2026 20:16:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 71, start=0, count=408, Z=7.101 [PrintingService.cs@1518] 07/30/2026 20:16:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2900, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:16:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66.25 [HeaterCheck.cs@67] 07/30/2026 20:16:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=181.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:16:42 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 181.43287404378253. Used = 181.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:16:50 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=170.4380645751953 that are outside of set tolerance 10 for current step target 181.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:16:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0957099 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:16:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] no longer approaching new target of 144.91667 with temperature 130.25 [HeaterCheck.cs@111] 07/30/2026 20:16:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=159966, estimate=30.493436732751455 for layer 71, Z=7.101 [PrintingService.cs@1524] 07/30/2026 20:16:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 34, island count 14 [PrintingService.cs@1569] 07/30/2026 20:16:56 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 72, start=0, count=408, Z=7.201 [PrintingService.cs@1518] 07/30/2026 20:16:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2920, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:17:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 70.916664 with temperature 62.25 [HeaterCheck.cs@111] 07/30/2026 20:17:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66 [HeaterCheck.cs@67] 07/30/2026 20:17:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=182.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:17:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 182.43287404378253. Used = 182.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:17:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66 [HeaterCheck.cs@67] 07/30/2026 20:17:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 144.91667 with temperature 140 [HeaterCheck.cs@67] 07/30/2026 20:17:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66.25 [HeaterCheck.cs@67] 07/30/2026 20:17:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=127024, estimate=35.76004988728646 for layer 72, Z=7.201 [PrintingService.cs@1524] 07/30/2026 20:17:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 47, island count 12 [PrintingService.cs@1569] 07/30/2026 20:17:13 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 73, start=0, count=408, Z=7.301 [PrintingService.cs@1518] 07/30/2026 20:17:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2853, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:17:14 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=171.47691345214844 that are outside of set tolerance 10 for current step target 182.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:17:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 144.91667 with temperature 140 [HeaterCheck.cs@67] 07/30/2026 20:17:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66.5 [HeaterCheck.cs@67] 07/30/2026 20:17:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=183.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:17:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 183.43287404378253. Used = 183.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:17:33 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=172.46206665039062 that are outside of set tolerance 10 for current step target 183.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=165494, estimate=31.95371216421774 for layer 73, Z=7.301 [PrintingService.cs@1524] 07/30/2026 20:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 48, island count 12 [PrintingService.cs@1569] 07/30/2026 20:17:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 74, start=0, count=408, Z=7.401 [PrintingService.cs@1518] 07/30/2026 20:17:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2924, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:17:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66 [HeaterCheck.cs@67] 07/30/2026 20:17:40 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (464 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:17:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 70.916664 with temperature 59 [HeaterCheck.cs@111] 07/30/2026 20:17:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 70.916664 with temperature 63.32143020629883 [HeaterCheck.cs@111] 07/30/2026 20:17:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=130365, estimate=36.6618337286799 for layer 74, Z=7.401 [PrintingService.cs@1524] 07/30/2026 20:17:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 14 [PrintingService.cs@1569] 07/30/2026 20:17:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 75, start=0, count=408, Z=7.501 [PrintingService.cs@1518] 07/30/2026 20:17:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2888, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:17:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=184.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:17:52 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 184.43287404378253. Used = 184.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:17:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66 [HeaterCheck.cs@67] 07/30/2026 20:17:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1620962 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:17:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66.25 [HeaterCheck.cs@67] 07/30/2026 20:17:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 144.91667 with temperature 140 [HeaterCheck.cs@67] 07/30/2026 20:17:59 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=173.50340270996094 that are outside of set tolerance 10 for current step target 184.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:18:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66 [HeaterCheck.cs@67] 07/30/2026 20:18:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66 [HeaterCheck.cs@67] 07/30/2026 20:18:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66 [HeaterCheck.cs@67] 07/30/2026 20:18:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.91667 with temperature 140.5 [HeaterCheck.cs@67] 07/30/2026 20:18:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66 [HeaterCheck.cs@67] 07/30/2026 20:18:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.91667 with temperature 140.5 [HeaterCheck.cs@67] 07/30/2026 20:18:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.91667 with temperature 140 [HeaterCheck.cs@67] 07/30/2026 20:18:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=170650, estimate=32.94511525518961 for layer 75, Z=7.501 [PrintingService.cs@1524] 07/30/2026 20:18:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 1, island count 12 [PrintingService.cs@1569] 07/30/2026 20:18:13 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 76, start=0, count=408, Z=7.601 [PrintingService.cs@1518] 07/30/2026 20:18:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2882, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:18:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 70.916664 with temperature 66 [HeaterCheck.cs@67] 07/30/2026 20:18:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.91667 with temperature 140 [HeaterCheck.cs@67] 07/30/2026 20:18:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=71.91666666666666,powderChamber1=71.91666666666666,powderChamber2=71.91666666666666,powderChamber3=71.91666666666666,powderChamber4=71.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:18:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.91667 with temperature 140.25 [HeaterCheck.cs@67] 07/30/2026 20:18:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=185.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:18:18 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 185.43287404378253. Used = 185.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:18:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:18:23 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=61 that are outside of set tolerance 10 for current step target 71.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:18:26 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=174.4539337158203 that are outside of set tolerance 10 for current step target 185.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:18:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1278.4244362, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.211221319239648, Elapsed = 00:21:18.4670984, TimeTotal = 08:25:58.5824986, Remaining = 08:04:40.1154002, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:36:40.6634746, WeightTotalEstimate = 02:36:40.6634746, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:14:38.5398364, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:18.4670984, HeatingEstimate = 00:48:41.5755638, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:35:22.1617354, WeightEstimate = 02:36:40.6634746 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:23:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:18:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.211221319239648;StartedAtUtc;00:21:18.4670984;08:25:58.5824986;08:04:40.1154002;False;408;0;0;00:00:00;02:36:40.6634746;02:36:40.6634746;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:14:38.5398364;00:00:00;02:00:00;00:21:18.4670984;00:48:41.5755638;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:35:22.1617354 [PrintingService.cs@1918] 07/30/2026 20:18:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=145.91666666666666,printChamber1=145.91666666666666,printChamber2=145.91666666666666,printChamber3=145.91666666666666,printChamber4=145.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:18:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 71.916664 with temperature 64 [HeaterCheck.cs@111] 07/30/2026 20:18:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] no longer approaching new target of 145.91667 with temperature 138.25 [HeaterCheck.cs@111] 07/30/2026 20:18:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=133410, estimate=37.03513078062597 for layer 76, Z=7.601 [PrintingService.cs@1524] 07/30/2026 20:18:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 57, island count 10 [PrintingService.cs@1569] 07/30/2026 20:18:33 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 77, start=0, count=408, Z=7.701 [PrintingService.cs@1518] 07/30/2026 20:18:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2862, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:18:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=135 that are outside of set tolerance 10 for current step target 145.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:18:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1286.9265068, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.238733653233781, Elapsed = 00:21:26.9719808, TimeTotal = 08:26:02.1809268, Remaining = 08:04:35.2089460, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:36:44.2590910, WeightTotalEstimate = 02:36:44.2590910, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:14:42.1354528, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:26.9719808, HeatingEstimate = 00:48:33.0734932, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:35:25.7573518, WeightEstimate = 02:36:44.2590910 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:23:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:18:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.238733653233781;StartedAtUtc;00:21:26.9719808;08:26:02.1809268;08:04:35.2089460;False;408;0;0;00:00:00;02:36:44.2590910;02:36:44.2590910;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:14:42.1354528;00:00:00;02:00:00;00:21:26.9719808;00:48:33.0734932;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:35:25.7573518 [PrintingService.cs@1918] 07/30/2026 20:18:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=146.91666666666666,printChamber1=146.91666666666666,printChamber2=146.91666666666666,printChamber3=146.91666666666666,printChamber4=146.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:18:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 146.91667 with temperature 141.75 [HeaterCheck.cs@88] 07/30/2026 20:18:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 146.91667 with temperature 142.5 [HeaterCheck.cs@67] 07/30/2026 20:18:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=186.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:18:40 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 186.43287404378253. Used = 186.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:18:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 146.91667 with temperature 142 [HeaterCheck.cs@67] 07/30/2026 20:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 146.91667 with temperature 142.25 [HeaterCheck.cs@67] 07/30/2026 20:18:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1294.4390427, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.263472021664121, Elapsed = 00:21:34.4830254, TimeTotal = 08:26:02.1794355, Remaining = 08:04:27.6964101, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:36:44.2590910, WeightTotalEstimate = 02:36:44.2590910, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:14:42.1354528, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:34.4830254, HeatingEstimate = 00:48:25.5609573, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:35:25.7573518, WeightEstimate = 02:36:44.2590910 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:23:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:18:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.263472021664121;StartedAtUtc;00:21:34.4830254;08:26:02.1794355;08:04:27.6964101;False;408;0;0;00:00:00;02:36:44.2590910;02:36:44.2590910;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:14:42.1354528;00:00:00;02:00:00;00:21:34.4830254;00:48:25.5609573;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:35:25.7573518 [PrintingService.cs@1918] 07/30/2026 20:18:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=147.91666666666666,printChamber1=147.91666666666666,printChamber2=147.91666666666666,printChamber3=147.91666666666666,printChamber4=147.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 147.91667 with temperature 142.5 [HeaterCheck.cs@88] 07/30/2026 20:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 147.91667 with temperature 142.25 [HeaterCheck.cs@88] 07/30/2026 20:18:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 147.91667 with temperature 143 [HeaterCheck.cs@67] 07/30/2026 20:18:47 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (164 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:18:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=175.5080108642578 that are outside of set tolerance 10 for current step target 186.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:18:50 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=137.5 that are outside of set tolerance 10 for current step target 147.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:18:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=174258, estimate=33.95909259898219 for layer 77, Z=7.701 [PrintingService.cs@1524] 07/30/2026 20:18:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 58, island count 10 [PrintingService.cs@1569] 07/30/2026 20:18:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 78, start=0, count=408, Z=7.801 [PrintingService.cs@1518] 07/30/2026 20:18:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2795, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:18:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0358055 ~ 6.01 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:19:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=187.43287404378253 [ControlledHeating.cs@169] 07/30/2026 20:19:05 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 187.43287404378253. Used = 187.43287404378253 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:19:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:19:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 147.91667 with temperature 143 [HeaterCheck.cs@67] 07/30/2026 20:19:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 147.91667 with temperature 143.25 [HeaterCheck.cs@67] 07/30/2026 20:19:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=135852, estimate=37.35500756977693 for layer 78, Z=7.801 [PrintingService.cs@1524] 07/30/2026 20:19:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 59, island count 10 [PrintingService.cs@1569] 07/30/2026 20:19:09 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 79, start=0, count=408, Z=7.901 [PrintingService.cs@1518] 07/30/2026 20:19:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2762, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:19:13 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=176.43914794921875 that are outside of set tolerance 10 for current step target 187.43287404378253 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:19:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 68.25 [HeaterCheck.cs@67] 07/30/2026 20:19:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1329.9568349, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.378125110137749, Elapsed = 00:22:09.9993291, TimeTotal = 08:26:18.2851253, Remaining = 08:04:08.2857962, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:37:00.3662693, WeightTotalEstimate = 02:37:00.3662693, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:14:58.2426311, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:09.9993291, HeatingEstimate = 00:47:50.0431651, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:35:41.8645301, WeightEstimate = 02:37:00.3662693 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:23:26. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:19:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.378125110137749;StartedAtUtc;00:22:09.9993291;08:26:18.2851253;08:04:08.2857962;False;408;0;0;00:00:00;02:37:00.3662693;02:37:00.3662693;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:14:58.2426311;00:00:00;02:00:00;00:22:09.9993291;00:47:50.0431651;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:35:41.8645301 [PrintingService.cs@1918] 07/30/2026 20:19:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=148.91666666666666,printChamber1=148.91666666666666,printChamber2=148.91666666666666,printChamber3=148.91666666666666,printChamber4=148.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:19:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:25 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=138.5 that are outside of set tolerance 10 for current step target 148.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:19:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1338.4613497, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.4061204821759565, Elapsed = 00:22:18.5038430, TimeTotal = 08:26:18.2851244, Remaining = 08:03:59.7812814, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:37:00.3662693, WeightTotalEstimate = 02:37:00.3662693, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:14:58.2426311, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:18.5038430, HeatingEstimate = 00:47:41.5386503, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:35:41.8645301, WeightEstimate = 02:37:00.3662693 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:23:26. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:19:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.4061204821759565;StartedAtUtc;00:22:18.5038430;08:26:18.2851244;08:03:59.7812814;False;408;0;0;00:00:00;02:37:00.3662693;02:37:00.3662693;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:14:58.2426311;00:00:00;02:00:00;00:22:18.5038430;00:47:41.5386503;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:35:41.8645301 [PrintingService.cs@1918] 07/30/2026 20:19:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=149.91666666666666,printChamber1=149.91666666666666,printChamber2=149.91666666666666,printChamber3=149.91666666666666,printChamber4=149.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:19:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=188 [ControlledHeating.cs@169] 07/30/2026 20:19:27 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=177.44825744628906 that are outside of set tolerance 10 for current step target 188 and final target 188 [ControlledHeating.cs@205] 07/30/2026 20:19:27 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 188. Used = 188 [SoftAnalysisSurfaceHeater.cs@881] 07/30/2026 20:19:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:19:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 71.916664 with temperature 64.5 [HeaterCheck.cs@111] 07/30/2026 20:19:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=177581, estimate=34.828491846192684 for layer 79, Z=7.901 [PrintingService.cs@1524] 07/30/2026 20:19:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 60, island count 10 [PrintingService.cs@1569] 07/30/2026 20:19:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 80, start=0, count=408, Z=8.001 [PrintingService.cs@1518] 07/30/2026 20:19:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2788, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:19:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 71.916664 with temperature 60 [HeaterCheck.cs@111] 07/30/2026 20:19:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=139.75 that are outside of set tolerance 10 for current step target 149.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:19:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1346.9666154, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.4341183801560735, Elapsed = 00:22:27.0091250, TimeTotal = 08:26:18.2851407, Remaining = 08:03:51.2760157, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:37:00.3662693, WeightTotalEstimate = 02:37:00.3662693, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:14:58.2426311, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:27.0091250, HeatingEstimate = 00:47:33.0333846, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:35:41.8645301, WeightEstimate = 02:37:00.3662693 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:23:26. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:19:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.4341183801560735;StartedAtUtc;00:22:27.0091250;08:26:18.2851407;08:03:51.2760157;False;408;0;0;00:00:00;02:37:00.3662693;02:37:00.3662693;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:14:58.2426311;00:00:00;02:00:00;00:22:27.0091250;00:47:33.0333846;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:35:41.8645301 [PrintingService.cs@1918] 07/30/2026 20:19:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=150.91666666666666,printChamber1=150.91666666666666,printChamber2=150.91666666666666,printChamber3=150.91666666666666,printChamber4=150.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:19:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:19:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 71.916664 with temperature 62.67856979370117 [HeaterCheck.cs@111] 07/30/2026 20:19:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=140.25,printChamber4=140 that are outside of set tolerance 10 for current step target 150.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:19:43 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Reached final heat-up-surface target 188 [ControlledHeating.cs@231] 07/30/2026 20:19:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150.91667 with temperature 147 [HeaterCheck.cs@67] 07/30/2026 20:19:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.5 [HeaterCheck.cs@67] 07/30/2026 20:19:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150.91667 with temperature 146.25 [HeaterCheck.cs@67] 07/30/2026 20:19:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150.91667 with temperature 146.25 [HeaterCheck.cs@67] 07/30/2026 20:19:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 150.91667 with temperature 146 [HeaterCheck.cs@67] 07/30/2026 20:19:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=138248, estimate=38.16778892668938 for layer 80, Z=8.001 [PrintingService.cs@1524] 07/30/2026 20:19:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 61, island count 10 [PrintingService.cs@1569] 07/30/2026 20:19:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 81, start=0, count=408, Z=8.101001 [PrintingService.cs@1518] 07/30/2026 20:19:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2883, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:19:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.5 [HeaterCheck.cs@67] 07/30/2026 20:19:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150.91667 with temperature 147 [HeaterCheck.cs@67] 07/30/2026 20:19:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150.91667 with temperature 147 [HeaterCheck.cs@67] 07/30/2026 20:19:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:19:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0096848 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:19:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (243 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:19:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:58 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/30/2026 20:19:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:19:59 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/30/2026 20:19:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/30/2026 20:19:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 20:19:59 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 20:19:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/30/2026 20:20:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:20:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 150.91667 with temperature 148 [HeaterCheck.cs@67] 07/30/2026 20:20:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:20:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 150.91667 with temperature 146 [HeaterCheck.cs@67] 07/30/2026 20:20:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] no longer approaching new target of 150.91667 with temperature 137 [HeaterCheck.cs@111] 07/30/2026 20:20:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=180891, estimate=35.735207747707655 for layer 81, Z=8.101001 [PrintingService.cs@1524] 07/30/2026 20:20:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 62, island count 10 [PrintingService.cs@1569] 07/30/2026 20:20:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 82, start=0, count=408, Z=8.201 [PrintingService.cs@1518] 07/30/2026 20:20:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2931, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:20:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:20:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 150.91667 with temperature 147 [HeaterCheck.cs@67] 07/30/2026 20:20:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:20:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:20:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:20:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.5 [HeaterCheck.cs@67] 07/30/2026 20:20:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 68.25 [HeaterCheck.cs@67] 07/30/2026 20:20:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:20:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:20:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=140552, estimate=38.54562914275595 for layer 82, Z=8.201 [PrintingService.cs@1524] 07/30/2026 20:20:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 63, island count 10 [PrintingService.cs@1569] 07/30/2026 20:20:28 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 83, start=0, count=408, Z=8.301001 [PrintingService.cs@1518] 07/30/2026 20:20:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2962, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:20:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:20:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:20:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:20:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 71.916664 with temperature 60.25 [HeaterCheck.cs@111] 07/30/2026 20:20:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67 [HeaterCheck.cs@67] 07/30/2026 20:20:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=122466, estimate=25.220906154979012 for layer 83, Z=8.301001 [PrintingService.cs@1524] 07/30/2026 20:20:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 79, island count 8 [PrintingService.cs@1569] 07/30/2026 20:20:41 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 84, start=0, count=408, Z=8.401001 [PrintingService.cs@1518] 07/30/2026 20:20:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2959, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:20:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:20:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] no longer approaching new target of 150.91667 with temperature 139.75 [HeaterCheck.cs@111] 07/30/2026 20:20:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.75 [HeaterCheck.cs@67] 07/30/2026 20:20:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=95333, estimate=27.551101251167914 for layer 84, Z=8.401001 [PrintingService.cs@1524] 07/30/2026 20:20:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 80, island count 8 [PrintingService.cs@1569] 07/30/2026 20:20:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 85, start=0, count=408, Z=8.501 [PrintingService.cs@1518] 07/30/2026 20:20:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2992, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:20:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0849512 ~ 6.02 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:20:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:20:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 150.91667 with temperature 146 [HeaterCheck.cs@67] 07/30/2026 20:21:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 71.916664 with temperature 68.5 [HeaterCheck.cs@67] 07/30/2026 20:21:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 68.5 [HeaterCheck.cs@67] 07/30/2026 20:21:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 71.916664 with temperature 68.25 [HeaterCheck.cs@67] 07/30/2026 20:21:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=124797, estimate=25.549184394000502 for layer 85, Z=8.501 [PrintingService.cs@1524] 07/30/2026 20:21:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 81, island count 8 [PrintingService.cs@1569] 07/30/2026 20:21:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 86, start=0, count=408, Z=8.601001 [PrintingService.cs@1518] 07/30/2026 20:21:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2943, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:21:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 71.916664 with temperature 62.82143020629883 [HeaterCheck.cs@111] 07/30/2026 20:21:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150.91667 with temperature 146.75 [HeaterCheck.cs@67] 07/30/2026 20:21:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150.91667 with temperature 146.25 [HeaterCheck.cs@67] 07/30/2026 20:21:18 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (749 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:21:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150.91667 with temperature 146.25 [HeaterCheck.cs@67] 07/30/2026 20:21:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:21:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:21:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 150.91667 with temperature 146 [HeaterCheck.cs@67] 07/30/2026 20:21:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1454.4885706, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.783070703626408, Elapsed = 00:24:14.5310969, TimeTotal = 08:26:49.9852799, Remaining = 08:02:35.4541830, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:37:32.0663918, WeightTotalEstimate = 02:37:32.0663918, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:15:29.9427536, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:14.5310969, HeatingEstimate = 00:45:45.5114294, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:13.5646526, WeightEstimate = 02:37:32.0663918 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:23:58. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:21:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.783070703626408;StartedAtUtc;00:24:14.5310969;08:26:49.9852799;08:02:35.4541830;False;408;0;0;00:00:00;02:37:32.0663918;02:37:32.0663918;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:15:29.9427536;00:00:00;02:00:00;00:24:14.5310969;00:45:45.5114294;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:13.5646526 [PrintingService.cs@1918] 07/30/2026 20:21:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=151.91666666666666,printChamber1=151.91666666666666,printChamber2=151.91666666666666,printChamber3=151.91666666666666,printChamber4=151.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:21:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 151.91667 with temperature 146 [HeaterCheck.cs@88] 07/30/2026 20:21:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 71.916664 with temperature 67.25 [HeaterCheck.cs@67] 07/30/2026 20:21:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=96454, estimate=27.711447888853385 for layer 86, Z=8.601001 [PrintingService.cs@1524] 07/30/2026 20:21:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 82, island count 8 [PrintingService.cs@1569] 07/30/2026 20:21:25 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 87, start=0, count=408, Z=8.701 [PrintingService.cs@1518] 07/30/2026 20:21:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3024, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:21:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=72.91666666666666,powderChamber1=72.91666666666666,powderChamber2=72.91666666666666,powderChamber3=72.91666666666666,powderChamber4=72.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:21:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 151.91667 with temperature 148.25 [HeaterCheck.cs@67] 07/30/2026 20:21:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:30 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=141.5 that are outside of set tolerance 10 for current step target 151.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:21:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1462.9890585, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.8096971986616746, Elapsed = 00:24:23.0315883, TimeTotal = 08:26:58.3720486, Remaining = 08:02:35.3404603, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:37:40.4531570, WeightTotalEstimate = 02:37:40.4531570, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:15:38.3295188, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:23.0315883, HeatingEstimate = 00:45:37.0109415, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:21.9514178, WeightEstimate = 02:37:40.4531570 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:21:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.8096971986616746;StartedAtUtc;00:24:23.0315883;08:26:58.3720486;08:02:35.3404603;False;408;0;0;00:00:00;02:37:40.4531570;02:37:40.4531570;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:15:38.3295188;00:00:00;02:00:00;00:24:23.0315883;00:45:37.0109415;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:21.9514178 [PrintingService.cs@1918] 07/30/2026 20:21:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=152.91666666666666,printChamber1=152.91666666666666,printChamber2=152.91666666666666,printChamber3=152.91666666666666,printChamber4=152.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:21:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:35 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderBed=62.17856979370117,powderChamber4=62 that are outside of set tolerance 10 for current step target 72.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:21:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 152.91667 with temperature 148.25 [HeaterCheck.cs@67] 07/30/2026 20:21:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 152.91667 with temperature 148.5 [HeaterCheck.cs@67] 07/30/2026 20:21:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1470.4904016, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.834363729583745, Elapsed = 00:24:30.5348376, TimeTotal = 08:26:58.3739548, Remaining = 08:02:27.8391172, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:37:40.4531570, WeightTotalEstimate = 02:37:40.4531570, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:15:38.3295188, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:30.5348376, HeatingEstimate = 00:45:29.5095984, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:21.9514178, WeightEstimate = 02:37:40.4531570 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:06. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:21:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.834363729583745;StartedAtUtc;00:24:30.5348376;08:26:58.3739548;08:02:27.8391172;False;408;0;0;00:00:00;02:37:40.4531570;02:37:40.4531570;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:15:38.3295188;00:00:00;02:00:00;00:24:30.5348376;00:45:29.5095984;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:21.9514178 [PrintingService.cs@1918] 07/30/2026 20:21:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=153.91666666666666,printChamber1=153.91666666666666,printChamber2=153.91666666666666,printChamber3=153.91666666666666,printChamber4=153.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:21:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 72.916664 with temperature 61 [HeaterCheck.cs@111] 07/30/2026 20:21:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=125506, estimate=25.746655200461024 for layer 87, Z=8.701 [PrintingService.cs@1524] 07/30/2026 20:21:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 83, island count 8 [PrintingService.cs@1569] 07/30/2026 20:21:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 88, start=0, count=408, Z=8.801001 [PrintingService.cs@1518] 07/30/2026 20:21:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68.25 [HeaterCheck.cs@67] 07/30/2026 20:21:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 153.91667 with temperature 149 [HeaterCheck.cs@67] 07/30/2026 20:21:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3024, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:21:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1477.9974693, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.858700676059573, Elapsed = 00:24:38.0399605, TimeTotal = 08:27:00.4777994, Remaining = 08:02:22.4378389, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:37:42.5589464, WeightTotalEstimate = 02:37:42.5589464, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:15:40.4353082, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:38.0399605, HeatingEstimate = 00:45:22.0025307, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:24.0572072, WeightEstimate = 02:37:42.5589464 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:21:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.858700676059573;StartedAtUtc;00:24:38.0399605;08:27:00.4777994;08:02:22.4378389;False;408;0;0;00:00:00;02:37:42.5589464;02:37:42.5589464;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:15:40.4353082;00:00:00;02:00:00;00:24:38.0399605;00:45:22.0025307;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:24.0572072 [PrintingService.cs@1918] 07/30/2026 20:21:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=154.91666666666666,printChamber1=154.91666666666666,printChamber2=154.91666666666666,printChamber3=154.91666666666666,printChamber4=154.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:21:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=96964, estimate=27.826762003527957 for layer 88, Z=8.801001 [PrintingService.cs@1524] 07/30/2026 20:21:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 84, island count 8 [PrintingService.cs@1569] 07/30/2026 20:21:53 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 89, start=0, count=408, Z=8.901001 [PrintingService.cs@1518] 07/30/2026 20:21:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:53 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=144.5 that are outside of set tolerance 10 for current step target 154.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:21:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3035, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:21:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1486.499676, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.886059338753317, Elapsed = 00:24:46.5422460, TimeTotal = 08:27:04.1545781, Remaining = 08:02:17.6123321, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:37:46.2356463, WeightTotalEstimate = 02:37:46.2356463, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:15:44.1120081, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:46.5422460, HeatingEstimate = 00:45:13.5003240, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:27.7339071, WeightEstimate = 02:37:46.2356463 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:21:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.886059338753317;StartedAtUtc;00:24:46.5422460;08:27:04.1545781;08:02:17.6123321;False;408;0;0;00:00:00;02:37:46.2356463;02:37:46.2356463;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:15:44.1120081;00:00:00;02:00:00;00:24:46.5422460;00:45:13.5003240;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:27.7339071 [PrintingService.cs@1918] 07/30/2026 20:21:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=155.91666666666666,printChamber1=155.91666666666666,printChamber2=155.91666666666666,printChamber3=155.91666666666666,printChamber4=155.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:21:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 155.91667 with temperature 150.5 [HeaterCheck.cs@88] 07/30/2026 20:21:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0199227 ~ 6.03 samples/sec, 5 resets, 8 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:21:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155.91667 with temperature 152.75 [HeaterCheck.cs@67] 07/30/2026 20:21:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:21:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:22:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 155.91667 with temperature 151.25 [HeaterCheck.cs@67] 07/30/2026 20:22:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=145.5 that are outside of set tolerance 10 for current step target 155.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:22:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:22:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:22:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68.25 [HeaterCheck.cs@67] 07/30/2026 20:22:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=126638, estimate=26.0761179061541 for layer 89, Z=8.901001 [PrintingService.cs@1524] 07/30/2026 20:22:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 85, island count 8 [PrintingService.cs@1569] 07/30/2026 20:22:10 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 90, start=0, count=408, Z=9.001 [PrintingService.cs@1518] 07/30/2026 20:22:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3022, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:22:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1505.0100538, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 4.946772801767109, Elapsed = 00:25:05.0525499, TimeTotal = 08:27:04.9378375, Remaining = 08:01:59.8852876, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:37:47.0189796, WeightTotalEstimate = 02:37:47.0189796, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:15:44.8953414, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:25:05.0525499, HeatingEstimate = 00:44:54.9899462, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:28.5172404, WeightEstimate = 02:37:47.0189796 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:13. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:22:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.946772801767109;StartedAtUtc;00:25:05.0525499;08:27:04.9378375;08:01:59.8852876;False;408;0;0;00:00:00;02:37:47.0189796;02:37:47.0189796;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:15:44.8953414;00:00:00;02:00:00;00:25:05.0525499;00:44:54.9899462;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:28.5172404 [PrintingService.cs@1918] 07/30/2026 20:22:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=156.91666666666666,printChamber1=156.91666666666666,printChamber2=156.91666666666666,printChamber3=156.91666666666666,printChamber4=156.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:22:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 72.916664 with temperature 68.5 [HeaterCheck.cs@67] 07/30/2026 20:22:20 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=146.25,printChamber2=146 that are outside of set tolerance 10 for current step target 156.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:22:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=97557, estimate=28.269525175113742 for layer 90, Z=9.001 [PrintingService.cs@1524] 07/30/2026 20:22:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 86, island count 8 [PrintingService.cs@1569] 07/30/2026 20:22:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 91, start=0, count=408, Z=9.101001 [PrintingService.cs@1518] 07/30/2026 20:22:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3056, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:22:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:22:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 156.91667 with temperature 153.25 [HeaterCheck.cs@67] 07/30/2026 20:22:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 72.916664 with temperature 68 [HeaterCheck.cs@67] 07/30/2026 20:22:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 156.91667 with temperature 152.5 [HeaterCheck.cs@67] 07/30/2026 20:22:34 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (389 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:22:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 156.91667 with temperature 154 [HeaterCheck.cs@67] 07/30/2026 20:22:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=126303, estimate=26.325694651193555 for layer 91, Z=9.101001 [PrintingService.cs@1524] 07/30/2026 20:22:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 87, island count 8 [PrintingService.cs@1569] 07/30/2026 20:22:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 92, start=0, count=408, Z=9.201 [PrintingService.cs@1518] 07/30/2026 20:22:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3083, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:22:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68.5 [HeaterCheck.cs@67] 07/30/2026 20:22:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] no longer approaching new target of 156.91667 with temperature 147.5 [HeaterCheck.cs@111] 07/30/2026 20:22:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 72.916664 with temperature 63.17856979370117 [HeaterCheck.cs@111] 07/30/2026 20:22:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 72.916664 with temperature 68.5 [HeaterCheck.cs@67] 07/30/2026 20:22:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 156.91667 with temperature 152.5 [HeaterCheck.cs@67] 07/30/2026 20:22:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 156.91667 with temperature 152.25 [HeaterCheck.cs@67] 07/30/2026 20:22:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 72.916664 with temperature 68.75 [HeaterCheck.cs@67] 07/30/2026 20:22:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 72.916664 with temperature 68.5 [HeaterCheck.cs@67] 07/30/2026 20:22:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 156.91667 with temperature 152 [HeaterCheck.cs@67] 07/30/2026 20:22:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 72.916664 with temperature 61 [HeaterCheck.cs@111] 07/30/2026 20:22:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=96830, estimate=28.144051563496582 for layer 92, Z=9.201 [PrintingService.cs@1524] 07/30/2026 20:22:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 88, island count 8 [PrintingService.cs@1569] 07/30/2026 20:22:50 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 93, start=0, count=408, Z=9.301001 [PrintingService.cs@1518] 07/30/2026 20:22:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3078, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:22:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=73.91666666666666,powderChamber1=73.91666666666666,powderChamber2=73.91666666666666,powderChamber3=73.91666666666666,powderChamber4=73.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:22:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 73.916664 with temperature 68.75 [HeaterCheck.cs@88] 07/30/2026 20:22:55 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0919620 ~ 6.01 samples/sec, 5 resets, 11 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:22:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 156.91667 with temperature 152 [HeaterCheck.cs@67] 07/30/2026 20:22:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 156.91667 with temperature 152 [HeaterCheck.cs@67] 07/30/2026 20:22:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69.5 [HeaterCheck.cs@67] 07/30/2026 20:23:01 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderBed=63.28571319580078,powderChamber4=63 that are outside of set tolerance 10 for current step target 73.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:23:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=123972, estimate=26.339960012353437 for layer 93, Z=9.301001 [PrintingService.cs@1524] 07/30/2026 20:23:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 89, island count 8 [PrintingService.cs@1569] 07/30/2026 20:23:03 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 94, start=0, count=408, Z=9.401001 [PrintingService.cs@1518] 07/30/2026 20:23:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2976, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:23:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 70.5 [HeaterCheck.cs@67] 07/30/2026 20:23:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69.5 [HeaterCheck.cs@67] 07/30/2026 20:23:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1566.5266562, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.147682394166084, Elapsed = 00:26:06.5692322, TimeTotal = 08:27:12.5153000, Remaining = 08:01:05.9460678, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:37:54.5963622, WeightTotalEstimate = 02:37:54.5963622, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:15:52.4727240, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:26:06.5692322, HeatingEstimate = 00:43:53.4733438, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:36.0946230, WeightEstimate = 02:37:54.5963622 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:23:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.147682394166084;StartedAtUtc;00:26:06.5692322;08:27:12.5153000;08:01:05.9460678;False;408;0;0;00:00:00;02:37:54.5963622;02:37:54.5963622;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:15:52.4727240;00:00:00;02:00:00;00:26:06.5692322;00:43:53.4733438;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:36.0946230 [PrintingService.cs@1918] 07/30/2026 20:23:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=157.91666666666666,printChamber1=157.91666666666666,printChamber2=157.91666666666666,printChamber3=157.91666666666666,printChamber4=157.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:23:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=94971, estimate=28.041376609510806 for layer 94, Z=9.401001 [PrintingService.cs@1524] 07/30/2026 20:23:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 90, island count 8 [PrintingService.cs@1569] 07/30/2026 20:23:15 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 95, start=0, count=408, Z=9.501 [PrintingService.cs@1518] 07/30/2026 20:23:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2992, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:23:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:22 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=147.75,printChamber4=147 that are outside of set tolerance 10 for current step target 157.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:23:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 157.91667 with temperature 153 [HeaterCheck.cs@67] 07/30/2026 20:23:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 157.91667 with temperature 153.25 [HeaterCheck.cs@67] 07/30/2026 20:23:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:38 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (176 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:23:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=122027, estimate=25.868975142617455 for layer 95, Z=9.501 [PrintingService.cs@1524] 07/30/2026 20:23:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 91, island count 10 [PrintingService.cs@1569] 07/30/2026 20:23:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 96, start=0, count=408, Z=9.601001 [PrintingService.cs@1518] 07/30/2026 20:23:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2997, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:23:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:23:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] no longer approaching new target of 157.91667 with temperature 147.25 [HeaterCheck.cs@111] 07/30/2026 20:23:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 73.916664 with temperature 61 [HeaterCheck.cs@111] 07/30/2026 20:23:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69.5 [HeaterCheck.cs@67] 07/30/2026 20:23:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 157.91667 with temperature 154.25 [HeaterCheck.cs@67] 07/30/2026 20:23:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1607.0315463, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.27987662659192, Elapsed = 00:26:47.0740423, TimeTotal = 08:27:17.7195900, Remaining = 08:00:30.6455477, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:37:59.8007322, WeightTotalEstimate = 02:37:59.8007322, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:15:57.6770940, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:26:47.0740423, HeatingEstimate = 00:43:12.9684537, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:41.2989930, WeightEstimate = 02:37:59.8007322 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:25. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:23:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.27987662659192;StartedAtUtc;00:26:47.0740423;08:27:17.7195900;08:00:30.6455477;False;408;0;0;00:00:00;02:37:59.8007322;02:37:59.8007322;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:15:57.6770940;00:00:00;02:00:00;00:26:47.0740423;00:43:12.9684537;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:41.2989930 [PrintingService.cs@1918] 07/30/2026 20:23:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=158.91666666666666,printChamber1=158.91666666666666,printChamber2=158.91666666666666,printChamber3=158.91666666666666,printChamber4=158.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:23:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 158.91667 with temperature 153.75 [HeaterCheck.cs@88] 07/30/2026 20:23:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=95346, estimate=28.378214336677985 for layer 96, Z=9.601001 [PrintingService.cs@1524] 07/30/2026 20:23:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 92, island count 10 [PrintingService.cs@1569] 07/30/2026 20:23:55 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 97, start=0, count=408, Z=9.701 [PrintingService.cs@1518] 07/30/2026 20:23:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1656440 ~ 6.02 samples/sec, 5 resets, 11 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:23:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3066, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:23:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69.25 [HeaterCheck.cs@67] 07/30/2026 20:23:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:24:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 158.91667 with temperature 155.5 [HeaterCheck.cs@67] 07/30/2026 20:24:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69.75 [HeaterCheck.cs@67] 07/30/2026 20:24:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=148 that are outside of set tolerance 10 for current step target 158.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:24:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 73.916664 with temperature 67.75 [HeaterCheck.cs@111] 07/30/2026 20:24:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1615.5336423, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.306937978787856, Elapsed = 00:26:55.5761491, TimeTotal = 08:27:22.7177321, Remaining = 08:00:27.1415830, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:04.7988635, WeightTotalEstimate = 02:38:04.7988635, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:02.6752253, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:26:55.5761491, HeatingEstimate = 00:43:04.4663577, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:46.2971243, WeightEstimate = 02:38:04.7988635 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:24:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.306937978787856;StartedAtUtc;00:26:55.5761491;08:27:22.7177321;08:00:27.1415830;False;408;0;0;00:00:00;02:38:04.7988635;02:38:04.7988635;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:02.6752253;00:00:00;02:00:00;00:26:55.5761491;00:43:04.4663577;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:46.2971243 [PrintingService.cs@1918] 07/30/2026 20:24:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=159.91666666666666,printChamber1=159.91666666666666,printChamber2=159.91666666666666,printChamber3=159.91666666666666,printChamber4=159.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:24:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 159.91667 with temperature 155 [HeaterCheck.cs@67] 07/30/2026 20:24:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 70 [HeaterCheck.cs@67] 07/30/2026 20:24:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 159.91667 with temperature 155 [HeaterCheck.cs@67] 07/30/2026 20:24:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 159.91667 with temperature 155 [HeaterCheck.cs@67] 07/30/2026 20:24:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 159.91667 with temperature 155 [HeaterCheck.cs@67] 07/30/2026 20:24:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 159.91667 with temperature 155.25 [HeaterCheck.cs@67] 07/30/2026 20:24:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 159.91667 with temperature 155 [HeaterCheck.cs@67] 07/30/2026 20:24:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1623.0390866, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.331592734185083, Elapsed = 00:27:03.0817342, TimeTotal = 08:27:22.7178729, Remaining = 08:00:19.6361387, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:04.7988635, WeightTotalEstimate = 02:38:04.7988635, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:02.6752253, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:27:03.0817342, HeatingEstimate = 00:42:56.9609134, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:46.2971243, WeightEstimate = 02:38:04.7988635 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:24:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.331592734185083;StartedAtUtc;00:27:03.0817342;08:27:22.7178729;08:00:19.6361387;False;408;0;0;00:00:00;02:38:04.7988635;02:38:04.7988635;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:02.6752253;00:00:00;02:00:00;00:27:03.0817342;00:42:56.9609134;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:46.2971243 [PrintingService.cs@1918] 07/30/2026 20:24:11 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=160.91666666666666,printChamber1=160.91666666666666,printChamber2=160.91666666666666,printChamber3=160.91666666666666,printChamber4=160.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:24:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 160.91667 with temperature 155 [HeaterCheck.cs@88] 07/30/2026 20:24:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 160.91667 with temperature 156 [HeaterCheck.cs@67] 07/30/2026 20:24:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 160.91667 with temperature 156.5 [HeaterCheck.cs@67] 07/30/2026 20:24:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=122684, estimate=26.2908879114489 for layer 97, Z=9.701 [PrintingService.cs@1524] 07/30/2026 20:24:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 93, island count 10 [PrintingService.cs@1569] 07/30/2026 20:24:16 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 98, start=0, count=408, Z=9.801001 [PrintingService.cs@1518] 07/30/2026 20:24:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3030, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:24:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1630.5421016, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.356239264466832, Elapsed = 00:27:10.5848112, TimeTotal = 08:27:22.7179349, Remaining = 08:00:12.1331237, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:04.7988635, WeightTotalEstimate = 02:38:04.7988635, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:02.6752253, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:27:10.5848112, HeatingEstimate = 00:42:49.4578984, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:46.2971243, WeightEstimate = 02:38:04.7988635 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:24:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.356239264466832;StartedAtUtc;00:27:10.5848112;08:27:22.7179349;08:00:12.1331237;False;408;0;0;00:00:00;02:38:04.7988635;02:38:04.7988635;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:02.6752253;00:00:00;02:00:00;00:27:10.5848112;00:42:49.4578984;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:46.2971243 [PrintingService.cs@1918] 07/30/2026 20:24:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=161.91666666666666,printChamber1=161.91666666666666,printChamber2=161.91666666666666,printChamber3=161.91666666666666,printChamber4=161.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:24:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 73.916664 with temperature 69.5 [HeaterCheck.cs@67] 07/30/2026 20:24:26 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=151.25 that are outside of set tolerance 10 for current step target 161.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:24:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=95320, estimate=28.53133873040498 for layer 98, Z=9.801001 [PrintingService.cs@1524] 07/30/2026 20:24:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 94, island count 10 [PrintingService.cs@1569] 07/30/2026 20:24:30 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 99, start=0, count=408, Z=9.901001 [PrintingService.cs@1518] 07/30/2026 20:24:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3075, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:24:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 73.916664 with temperature 62.89285659790039 [HeaterCheck.cs@111] 07/30/2026 20:24:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.91667 with temperature 157.5 [HeaterCheck.cs@67] 07/30/2026 20:24:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.91667 with temperature 157.25 [HeaterCheck.cs@67] 07/30/2026 20:24:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:24:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.91667 with temperature 157.25 [HeaterCheck.cs@67] 07/30/2026 20:24:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.91667 with temperature 157 [HeaterCheck.cs@67] 07/30/2026 20:24:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.91667 with temperature 157 [HeaterCheck.cs@67] 07/30/2026 20:24:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.91667 with temperature 157 [HeaterCheck.cs@67] 07/30/2026 20:24:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 161.91667 with temperature 157.5 [HeaterCheck.cs@67] 07/30/2026 20:24:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.75 [HeaterCheck.cs@67] 07/30/2026 20:24:41 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (123 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:24:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1657.0734879, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.443390445140258, Elapsed = 00:27:37.1159879, TimeTotal = 08:27:22.7177253, Remaining = 07:59:45.6017374, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:04.7988635, WeightTotalEstimate = 02:38:04.7988635, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:02.6752253, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:27:37.1159879, HeatingEstimate = 00:42:22.9265121, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:46.2971243, WeightEstimate = 02:38:04.7988635 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:24:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.443390445140258;StartedAtUtc;00:27:37.1159879;08:27:22.7177253;07:59:45.6017374;False;408;0;0;00:00:00;02:38:04.7988635;02:38:04.7988635;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:02.6752253;00:00:00;02:00:00;00:27:37.1159879;00:42:22.9265121;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:46.2971243 [PrintingService.cs@1918] 07/30/2026 20:24:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=162.91666666666666,printChamber1=162.91666666666666,printChamber2=162.91666666666666,printChamber3=162.91666666666666,printChamber4=162.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:24:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=122516, estimate=26.31502046944975 for layer 99, Z=9.901001 [PrintingService.cs@1524] 07/30/2026 20:24:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 95, island count 10 [PrintingService.cs@1569] 07/30/2026 20:24:50 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 100, start=0, count=408, Z=10.001 [PrintingService.cs@1518] 07/30/2026 20:24:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3086, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:24:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:24:52 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=152 that are outside of set tolerance 10 for current step target 162.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:24:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1665.5736499, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.471312247814876, Elapsed = 00:27:45.6161431, TimeTotal = 08:27:22.7177185, Remaining = 07:59:37.1015754, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:04.7988635, WeightTotalEstimate = 02:38:04.7988635, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:02.6752253, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:27:45.6161431, HeatingEstimate = 00:42:14.4263501, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:46.2971243, WeightEstimate = 02:38:04.7988635 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:30. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:24:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.471312247814876;StartedAtUtc;00:27:45.6161431;08:27:22.7177185;07:59:37.1015754;False;408;0;0;00:00:00;02:38:04.7988635;02:38:04.7988635;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:02.6752253;00:00:00;02:00:00;00:27:45.6161431;00:42:14.4263501;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:46.2971243 [PrintingService.cs@1918] 07/30/2026 20:24:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=163.91666666666666,printChamber1=163.91666666666666,printChamber2=163.91666666666666,printChamber3=163.91666666666666,printChamber4=163.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:24:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0036659 ~ 6.02 samples/sec, 5 resets, 11 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:24:58 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/30/2026 20:24:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/30/2026 20:24:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 20:24:59 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/30/2026 20:24:59 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 20:24:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/30/2026 20:25:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:01 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=153.75 that are outside of set tolerance 10 for current step target 163.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:25:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.75 [HeaterCheck.cs@67] 07/30/2026 20:25:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=95358, estimate=28.470241250587286 for layer 100, Z=10.001 [PrintingService.cs@1524] 07/30/2026 20:25:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 96, island count 10 [PrintingService.cs@1569] 07/30/2026 20:25:02 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 101, start=0, count=408, Z=10.101001 [PrintingService.cs@1518] 07/30/2026 20:25:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3142, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:25:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 163.91667 with temperature 159 [HeaterCheck.cs@67] 07/30/2026 20:25:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 73.916664 with temperature 60.75 [HeaterCheck.cs@111] 07/30/2026 20:25:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 163.91667 with temperature 159.25 [HeaterCheck.cs@67] 07/30/2026 20:25:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 163.91667 with temperature 160.25 [HeaterCheck.cs@67] 07/30/2026 20:25:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 163.91667 with temperature 159.25 [HeaterCheck.cs@67] 07/30/2026 20:25:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 163.91667 with temperature 159.25 [HeaterCheck.cs@67] 07/30/2026 20:25:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 163.91667 with temperature 159.25 [HeaterCheck.cs@67] 07/30/2026 20:25:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 163.91667 with temperature 159.5 [HeaterCheck.cs@67] 07/30/2026 20:25:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.25 [HeaterCheck.cs@67] 07/30/2026 20:25:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=122487, estimate=26.120707561751974 for layer 101, Z=10.101001 [PrintingService.cs@1524] 07/30/2026 20:25:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 97, island count 10 [PrintingService.cs@1569] 07/30/2026 20:25:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 102, start=0, count=408, Z=10.201 [PrintingService.cs@1518] 07/30/2026 20:25:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3104, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:25:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.5 [HeaterCheck.cs@67] 07/30/2026 20:25:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.25 [HeaterCheck.cs@67] 07/30/2026 20:25:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 73.916664 with temperature 62.85714340209961 [HeaterCheck.cs@111] 07/30/2026 20:25:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=94367, estimate=28.51329569271439 for layer 102, Z=10.201 [PrintingService.cs@1524] 07/30/2026 20:25:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 98, island count 10 [PrintingService.cs@1569] 07/30/2026 20:25:40 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 103, start=0, count=408, Z=10.301001 [PrintingService.cs@1518] 07/30/2026 20:25:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3150, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:25:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.25 [HeaterCheck.cs@67] 07/30/2026 20:25:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] no longer approaching new target of 163.91667 with temperature 149.5 [HeaterCheck.cs@111] 07/30/2026 20:25:46 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (274 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:25:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69 [HeaterCheck.cs@67] 07/30/2026 20:25:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.25 [HeaterCheck.cs@67] 07/30/2026 20:25:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=121093, estimate=25.902090977127557 for layer 103, Z=10.301001 [PrintingService.cs@1524] 07/30/2026 20:25:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 99, island count 10 [PrintingService.cs@1569] 07/30/2026 20:25:54 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 104, start=0, count=408, Z=10.401001 [PrintingService.cs@1518] 07/30/2026 20:25:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3107, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:25:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0224283 ~ 6.01 samples/sec, 5 resets, 11 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:26:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.5 [HeaterCheck.cs@67] 07/30/2026 20:26:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.5 [HeaterCheck.cs@67] 07/30/2026 20:26:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=92616, estimate=27.72283073628481 for layer 104, Z=10.401001 [PrintingService.cs@1524] 07/30/2026 20:26:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 100, island count 10 [PrintingService.cs@1569] 07/30/2026 20:26:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 105, start=0, count=408, Z=10.501 [PrintingService.cs@1518] 07/30/2026 20:26:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3125, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:26:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.25 [HeaterCheck.cs@67] 07/30/2026 20:26:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 163.91667 with temperature 159 [HeaterCheck.cs@67] 07/30/2026 20:26:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 163.91667 with temperature 159.25 [HeaterCheck.cs@67] 07/30/2026 20:26:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 163.91667 with temperature 159.25 [HeaterCheck.cs@67] 07/30/2026 20:26:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 163.91667 with temperature 159.75 [HeaterCheck.cs@67] 07/30/2026 20:26:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.5 [HeaterCheck.cs@67] 07/30/2026 20:26:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=118975, estimate=24.8596911758836 for layer 105, Z=10.501 [PrintingService.cs@1524] 07/30/2026 20:26:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 101, island count 10 [PrintingService.cs@1569] 07/30/2026 20:26:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 106, start=0, count=408, Z=10.601001 [PrintingService.cs@1518] 07/30/2026 20:26:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3071, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:26:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1756.0996001, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.767019964021155, Elapsed = 00:29:16.1421070, TimeTotal = 08:27:31.4657129, Remaining = 07:58:15.3236059, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:13.5468442, WeightTotalEstimate = 02:38:13.5468442, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:11.4232060, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:16.1421070, HeatingEstimate = 00:40:43.9003999, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:55.0451050, WeightEstimate = 02:38:13.5468442 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:39. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:26:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.767019964021155;StartedAtUtc;00:29:16.1421070;08:27:31.4657129;07:58:15.3236059;False;408;0;0;00:00:00;02:38:13.5468442;02:38:13.5468442;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:11.4232060;00:00:00;02:00:00;00:29:16.1421070;00:40:43.9003999;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:55.0451050 [PrintingService.cs@1918] 07/30/2026 20:26:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=164.91666666666666,printChamber1=164.91666666666666,printChamber2=164.91666666666666,printChamber3=164.91666666666666,printChamber4=164.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:26:31 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=154 that are outside of set tolerance 10 for current step target 164.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:26:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1764.6015711, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.794939661344787, Elapsed = 00:29:24.6440632, TimeTotal = 08:27:31.4656981, Remaining = 07:58:06.8216349, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:13.5468442, WeightTotalEstimate = 02:38:13.5468442, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:11.4232060, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:24.6440632, HeatingEstimate = 00:40:35.3984289, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:55.0451050, WeightEstimate = 02:38:13.5468442 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:39. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:26:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.794939661344787;StartedAtUtc;00:29:24.6440632;08:27:31.4656981;07:58:06.8216349;False;408;0;0;00:00:00;02:38:13.5468442;02:38:13.5468442;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:11.4232060;00:00:00;02:00:00;00:29:24.6440632;00:40:35.3984289;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:55.0451050 [PrintingService.cs@1918] 07/30/2026 20:26:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=165.91666666666666,printChamber1=165.91666666666666,printChamber2=165.91666666666666,printChamber3=165.91666666666666,printChamber4=165.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:26:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.75 [HeaterCheck.cs@67] 07/30/2026 20:26:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=92727, estimate=27.86254503163016 for layer 106, Z=10.601001 [PrintingService.cs@1524] 07/30/2026 20:26:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 102, island count 10 [PrintingService.cs@1569] 07/30/2026 20:26:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 107, start=0, count=408, Z=10.701 [PrintingService.cs@1518] 07/30/2026 20:26:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3064, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:26:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 165.91667 with temperature 162.75 [HeaterCheck.cs@67] 07/30/2026 20:26:40 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=155.25 that are outside of set tolerance 10 for current step target 165.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:26:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 73.916664 with temperature 64.25 [HeaterCheck.cs@111] 07/30/2026 20:26:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1773.1032253, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.822084726057613, Elapsed = 00:29:33.1460784, TimeTotal = 08:27:35.5182865, Remaining = 07:58:02.3722081, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:17.5990716, WeightTotalEstimate = 02:38:17.5990716, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:15.4754334, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:33.1460784, HeatingEstimate = 00:40:26.8967747, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:59.0973324, WeightEstimate = 02:38:17.5990716 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:26:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.822084726057613;StartedAtUtc;00:29:33.1460784;08:27:35.5182865;07:58:02.3722081;False;408;0;0;00:00:00;02:38:17.5990716;02:38:17.5990716;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:15.4754334;00:00:00;02:00:00;00:29:33.1460784;00:40:26.8967747;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:59.0973324 [PrintingService.cs@1918] 07/30/2026 20:26:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=166.91666666666666,printChamber1=166.91666666666666,printChamber2=166.91666666666666,printChamber3=166.91666666666666,printChamber4=166.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:26:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 166.91667 with temperature 161.75 [HeaterCheck.cs@88] 07/30/2026 20:26:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=119628, estimate=25.005118891331207 for layer 107, Z=10.701 [PrintingService.cs@1524] 07/30/2026 20:26:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 103, island count 10 [PrintingService.cs@1569] 07/30/2026 20:26:48 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 108, start=0, count=408, Z=10.801001 [PrintingService.cs@1518] 07/30/2026 20:26:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1780.6024439, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.846606157359816, Elapsed = 00:29:40.6451359, TimeTotal = 08:27:36.0472858, Remaining = 07:57:55.4021499, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:18.1282320, WeightTotalEstimate = 02:38:18.1282320, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:16.0045938, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:40.6451359, HeatingEstimate = 00:40:19.3975561, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:59.6264928, WeightEstimate = 02:38:18.1282320 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:26:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.846606157359816;StartedAtUtc;00:29:40.6451359;08:27:36.0472858;07:57:55.4021499;False;408;0;0;00:00:00;02:38:18.1282320;02:38:18.1282320;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:16.0045938;00:00:00;02:00:00;00:29:40.6451359;00:40:19.3975561;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:59.6264928 [PrintingService.cs@1918] 07/30/2026 20:26:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=167.91666666666666,printChamber1=167.91666666666666,printChamber2=167.91666666666666,printChamber3=167.91666666666666,printChamber4=167.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:26:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.75 [HeaterCheck.cs@67] 07/30/2026 20:26:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3036, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:26:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 73.916664 with temperature 69.75 [HeaterCheck.cs@67] 07/30/2026 20:26:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 167.91667 with temperature 163 [HeaterCheck.cs@67] 07/30/2026 20:26:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (455 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:26:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 167.91667 with temperature 163.25 [HeaterCheck.cs@67] 07/30/2026 20:26:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0883017 ~ 6.01 samples/sec, 5 resets, 11 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:26:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1788.1098992, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.871255690415822, Elapsed = 00:29:48.1523980, TimeTotal = 08:27:36.0470926, Remaining = 07:57:47.8946946, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:18.1282320, WeightTotalEstimate = 02:38:18.1282320, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:16.0045938, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:48.1523980, HeatingEstimate = 00:40:11.8901008, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:59.6264928, WeightEstimate = 02:38:18.1282320 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:26:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.871255690415822;StartedAtUtc;00:29:48.1523980;08:27:36.0470926;07:57:47.8946946;False;408;0;0;00:00:00;02:38:18.1282320;02:38:18.1282320;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:16.0045938;00:00:00;02:00:00;00:29:48.1523980;00:40:11.8901008;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:59.6264928 [PrintingService.cs@1918] 07/30/2026 20:26:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=168.91666666666666,printChamber1=168.91666666666666,printChamber2=168.91666666666666,printChamber3=168.91666666666666,printChamber4=168.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:26:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 168.91667 with temperature 163.25 [HeaterCheck.cs@88] 07/30/2026 20:26:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 168.91667 with temperature 163.5 [HeaterCheck.cs@88] 07/30/2026 20:26:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 168.91667 with temperature 164 [HeaterCheck.cs@67] 07/30/2026 20:27:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=92984, estimate=27.992761731348143 for layer 108, Z=10.801001 [PrintingService.cs@1524] 07/30/2026 20:27:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 104, island count 10 [PrintingService.cs@1569] 07/30/2026 20:27:01 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 109, start=0, count=408, Z=10.901001 [PrintingService.cs@1518] 07/30/2026 20:27:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3114, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:27:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1795.6144035, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 5.895895798620684, Elapsed = 00:29:55.6569112, TimeTotal = 08:27:36.0489624, Remaining = 07:57:40.3920512, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:18.1300929, WeightTotalEstimate = 02:38:18.1300929, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:16.0064547, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:29:55.6569112, HeatingEstimate = 00:40:04.3855965, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:36:59.6283537, WeightEstimate = 02:38:18.1300929 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:27:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.895895798620684;StartedAtUtc;00:29:55.6569112;08:27:36.0489624;07:57:40.3920512;False;408;0;0;00:00:00;02:38:18.1300929;02:38:18.1300929;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:16.0064547;00:00:00;02:00:00;00:29:55.6569112;00:40:04.3855965;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:36:59.6283537 [PrintingService.cs@1918] 07/30/2026 20:27:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=169.91666666666666,printChamber1=169.91666666666666,printChamber2=169.91666666666666,printChamber3=169.91666666666666,printChamber4=169.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:27:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 73.916664 with temperature 63.32143020629883 [HeaterCheck.cs@111] 07/30/2026 20:27:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 169.91667 with temperature 165 [HeaterCheck.cs@67] 07/30/2026 20:27:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 169.91667 with temperature 165 [HeaterCheck.cs@67] 07/30/2026 20:27:11 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=158.75 that are outside of set tolerance 10 for current step target 169.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:27:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=119816, estimate=25.16345311978747 for layer 109, Z=10.901001 [PrintingService.cs@1524] 07/30/2026 20:27:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 105, island count 8 [PrintingService.cs@1569] 07/30/2026 20:27:14 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 110, start=0, count=408, Z=11.001 [PrintingService.cs@1518] 07/30/2026 20:27:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3052, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:27:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=74.91666666666666,powderChamber1=74.91666666666666,powderChamber2=74.91666666666666,powderChamber3=74.91666666666666,powderChamber4=74.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:27:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=93156, estimate=27.96998998144857 for layer 110, Z=11.001 [PrintingService.cs@1524] 07/30/2026 20:27:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 106, island count 8 [PrintingService.cs@1569] 07/30/2026 20:27:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 111, start=0, count=408, Z=11.101001 [PrintingService.cs@1518] 07/30/2026 20:27:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 74.916664 with temperature 70.75 [HeaterCheck.cs@67] 07/30/2026 20:27:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 4024, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:27:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 169.91667 with temperature 165 [HeaterCheck.cs@67] 07/30/2026 20:27:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 169.91667 with temperature 165 [HeaterCheck.cs@67] 07/30/2026 20:27:31 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderBed=63.96428680419922,powderChamber4=64.5 that are outside of set tolerance 10 for current step target 74.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:27:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 169.91667 with temperature 165.25 [HeaterCheck.cs@67] 07/30/2026 20:27:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 74.916664 with temperature 70.5 [HeaterCheck.cs@67] 07/30/2026 20:27:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=132284, estimate=31.675523672141406 for layer 111, Z=11.101001 [PrintingService.cs@1524] 07/30/2026 20:27:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 48 [PrintingService.cs@1569] 07/30/2026 20:27:43 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 112, start=0, count=408, Z=11.201 [PrintingService.cs@1518] 07/30/2026 20:27:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 4081, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:27:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 74.916664 with temperature 70.75 [HeaterCheck.cs@67] 07/30/2026 20:27:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 74.916664 with temperature 70.75 [HeaterCheck.cs@67] 07/30/2026 20:27:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=75.91666666666666,powderChamber1=75.91666666666666,powderChamber2=75.91666666666666,powderChamber3=75.91666666666666,powderChamber4=75.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:27:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] approaching new target of 75.916664 with temperature 70.5 [HeaterCheck.cs@88] 07/30/2026 20:27:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:27:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:27:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:27:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:27:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.25 [HeaterCheck.cs@67] 07/30/2026 20:27:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 75.916664 with temperature 65.5 [HeaterCheck.cs@111] 07/30/2026 20:27:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:27:55 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderBed=65.71428680419922,powderChamber4=65 that are outside of set tolerance 10 for current step target 75.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:27:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0257437 ~ 6.01 samples/sec, 5 resets, 11 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:27:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.5 [HeaterCheck.cs@67] 07/30/2026 20:27:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:27:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:27:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:27:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:27:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=112595, estimate=33.571213858469235 for layer 112, Z=11.201 [PrintingService.cs@1524] 07/30/2026 20:28:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 38 [PrintingService.cs@1569] 07/30/2026 20:28:00 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 113, start=0, count=408, Z=11.301001 [PrintingService.cs@1518] 07/30/2026 20:28:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 4038, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:28:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] no longer approaching new target of 169.91667 with temperature 161.5 [HeaterCheck.cs@111] 07/30/2026 20:28:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.5 [HeaterCheck.cs@67] 07/30/2026 20:28:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 169.91667 with temperature 165.25 [HeaterCheck.cs@67] 07/30/2026 20:28:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 169.91667 with temperature 165 [HeaterCheck.cs@67] 07/30/2026 20:28:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 169.91667 with temperature 165 [HeaterCheck.cs@67] 07/30/2026 20:28:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.25 [HeaterCheck.cs@67] 07/30/2026 20:28:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 169.91667 with temperature 165 [HeaterCheck.cs@67] 07/30/2026 20:28:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 169.91667 with temperature 165.25 [HeaterCheck.cs@67] 07/30/2026 20:28:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 169.91667 with temperature 165.25 [HeaterCheck.cs@67] 07/30/2026 20:28:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1869.1554944, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.1372152838870315, Elapsed = 00:31:09.1979879, TimeTotal = 08:27:36.7772424, Remaining = 07:56:27.5792545, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:18.8583871, WeightTotalEstimate = 02:38:18.8583871, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:16.7347489, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:09.1979879, HeatingEstimate = 00:38:50.8445056, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:00.3566479, WeightEstimate = 02:38:18.8583871 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:28:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.1372152838870315;StartedAtUtc;00:31:09.1979879;08:27:36.7772424;07:56:27.5792545;False;408;0;0;00:00:00;02:38:18.8583871;02:38:18.8583871;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:16.7347489;00:00:00;02:00:00;00:31:09.1979879;00:38:50.8445056;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:00.3566479 [PrintingService.cs@1918] 07/30/2026 20:28:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=170.91666666666666,printChamber1=170.91666666666666,printChamber2=170.91666666666666,printChamber3=170.91666666666666,printChamber4=170.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:28:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 170.91667 with temperature 165.25 [HeaterCheck.cs@88] 07/30/2026 20:28:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 170.91667 with temperature 165.25 [HeaterCheck.cs@88] 07/30/2026 20:28:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 170.91667 with temperature 166.5 [HeaterCheck.cs@67] 07/30/2026 20:28:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 170.91667 with temperature 166 [HeaterCheck.cs@67] 07/30/2026 20:28:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 170.91667 with temperature 166 [HeaterCheck.cs@67] 07/30/2026 20:28:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 170.91667 with temperature 166 [HeaterCheck.cs@67] 07/30/2026 20:28:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=151209, estimate=33.29006142466258 for layer 113, Z=11.301001 [PrintingService.cs@1524] 07/30/2026 20:28:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 170.91667 with temperature 166.25 [HeaterCheck.cs@67] 07/30/2026 20:28:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 20 [PrintingService.cs@1569] 07/30/2026 20:28:22 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 114, start=0, count=408, Z=11.401001 [PrintingService.cs@1518] 07/30/2026 20:28:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 4292, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:28:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.25 [HeaterCheck.cs@67] 07/30/2026 20:28:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.25 [HeaterCheck.cs@67] 07/30/2026 20:28:24 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=160 that are outside of set tolerance 10 for current step target 170.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:28:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1877.6583327, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.165133034825155, Elapsed = 00:31:17.7008357, TimeTotal = 08:27:36.7772519, Remaining = 07:56:19.0764162, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:18.8583871, WeightTotalEstimate = 02:38:18.8583871, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:16.7347489, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:31:17.7008357, HeatingEstimate = 00:38:42.3416673, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:00.3566479, WeightEstimate = 02:38:18.8583871 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:28:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.165133034825155;StartedAtUtc;00:31:17.7008357;08:27:36.7772519;07:56:19.0764162;False;408;0;0;00:00:00;02:38:18.8583871;02:38:18.8583871;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:16.7347489;00:00:00;02:00:00;00:31:17.7008357;00:38:42.3416673;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:00.3566479 [PrintingService.cs@1918] 07/30/2026 20:28:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=171.91666666666666,printChamber1=171.91666666666666,printChamber2=171.91666666666666,printChamber3=171.91666666666666,printChamber4=171.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:28:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.25 [HeaterCheck.cs@67] 07/30/2026 20:28:26 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (280 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:28:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171.91667 with temperature 167 [HeaterCheck.cs@67] 07/30/2026 20:28:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171.91667 with temperature 167.25 [HeaterCheck.cs@67] 07/30/2026 20:28:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 171.91667 with temperature 167 [HeaterCheck.cs@67] 07/30/2026 20:28:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.25 [HeaterCheck.cs@67] 07/30/2026 20:28:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 75.916664 with temperature 65.32142639160156 [HeaterCheck.cs@111] 07/30/2026 20:28:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:33 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=161.75 that are outside of set tolerance 10 for current step target 171.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:28:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.25 [HeaterCheck.cs@67] 07/30/2026 20:28:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.25 [HeaterCheck.cs@67] 07/30/2026 20:28:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.25 [HeaterCheck.cs@67] 07/30/2026 20:28:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=124551, estimate=35.698070735243476 for layer 114, Z=11.401001 [PrintingService.cs@1524] 07/30/2026 20:28:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 67, island count 12 [PrintingService.cs@1569] 07/30/2026 20:28:38 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 115, start=0, count=408, Z=11.501 [PrintingService.cs@1518] 07/30/2026 20:28:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 4182, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:28:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 171.91667 with temperature 167.25 [HeaterCheck.cs@67] 07/30/2026 20:28:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.75 [HeaterCheck.cs@67] 07/30/2026 20:28:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71 [HeaterCheck.cs@67] 07/30/2026 20:28:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 171.91667 with temperature 167.75 [HeaterCheck.cs@67] 07/30/2026 20:28:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.91667 with temperature 167 [HeaterCheck.cs@67] 07/30/2026 20:28:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.91667 with temperature 167.25 [HeaterCheck.cs@67] 07/30/2026 20:28:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.91667 with temperature 168.25 [HeaterCheck.cs@67] 07/30/2026 20:28:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.91667 with temperature 167.75 [HeaterCheck.cs@67] 07/30/2026 20:28:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 171.91667 with temperature 168.5 [HeaterCheck.cs@67] 07/30/2026 20:28:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1606840 ~ 6.02 samples/sec, 5 resets, 11 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:28:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.5 [HeaterCheck.cs@67] 07/30/2026 20:28:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=161696, estimate=34.53578450409613 for layer 115, Z=11.501 [PrintingService.cs@1524] 07/30/2026 20:28:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 68, island count 12 [PrintingService.cs@1569] 07/30/2026 20:28:58 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 116, start=0, count=408, Z=11.601001 [PrintingService.cs@1518] 07/30/2026 20:28:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 4147, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:29:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.5 [HeaterCheck.cs@67] 07/30/2026 20:29:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 75.916664 with temperature 65.25 [HeaterCheck.cs@111] 07/30/2026 20:29:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 75.916664 with temperature 71.25 [HeaterCheck.cs@67] 07/30/2026 20:29:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] no longer approaching new target of 171.91667 with temperature 157.5 [HeaterCheck.cs@111] 07/30/2026 20:29:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=130697, estimate=37.49670865016613 for layer 116, Z=11.601001 [PrintingService.cs@1524] 07/30/2026 20:29:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 69, island count 12 [PrintingService.cs@1569] 07/30/2026 20:29:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 117, start=0, count=408, Z=11.701 [PrintingService.cs@1518] 07/30/2026 20:29:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3813, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:29:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1944.1771008, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.381593384547925, Elapsed = 00:32:24.2210146, TimeTotal = 08:27:46.0748099, Remaining = 07:55:21.8537953, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:28.1545343, WeightTotalEstimate = 02:38:28.1545343, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:26.0308961, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:24.2210146, HeatingEstimate = 00:37:35.8228992, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:09.6527951, WeightEstimate = 02:38:28.1545343 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:54. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:29:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.381593384547925;StartedAtUtc;00:32:24.2210146;08:27:46.0748099;07:55:21.8537953;False;408;0;0;00:00:00;02:38:28.1545343;02:38:28.1545343;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:26.0308961;00:00:00;02:00:00;00:32:24.2210146;00:37:35.8228992;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:09.6527951 [PrintingService.cs@1918] 07/30/2026 20:29:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=172.91666666666666,printChamber1=172.91666666666666,printChamber2=172.91666666666666,printChamber3=172.91666666666666,printChamber4=172.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:29:39 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (110 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:29:39 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=162 that are outside of set tolerance 10 for current step target 172.91666666666666 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:29:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1952.6839911, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.409517735708313, Elapsed = 00:32:32.7285069, TimeTotal = 08:27:46.0754119, Remaining = 07:55:13.3469050, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:28.1545343, WeightTotalEstimate = 02:38:28.1545343, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:26.0308961, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:32.7285069, HeatingEstimate = 00:37:27.3160089, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:09.6527951, WeightEstimate = 02:38:28.1545343 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:54. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:29:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.409517735708313;StartedAtUtc;00:32:32.7285069;08:27:46.0754119;07:55:13.3469050;False;408;0;0;00:00:00;02:38:28.1545343;02:38:28.1545343;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:26.0308961;00:00:00;02:00:00;00:32:32.7285069;00:37:27.3160089;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:09.6527951 [PrintingService.cs@1918] 07/30/2026 20:29:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=173.91666666666666,printChamber1=173.91666666666666,printChamber2=173.91666666666666,printChamber3=173.91666666666666,printChamber4=173.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:29:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=76.91666666666666,powderChamber1=76.91666666666666,powderChamber2=76.91666666666666,powderChamber3=76.91666666666666,powderChamber4=76.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:29:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 76.916664 with temperature 72 [HeaterCheck.cs@67] 07/30/2026 20:29:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 173.91667 with temperature 169.5 [HeaterCheck.cs@67] 07/30/2026 20:29:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 76.916664 with temperature 72.25 [HeaterCheck.cs@67] 07/30/2026 20:29:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=166035, estimate=35.089287689519146 for layer 117, Z=11.701 [PrintingService.cs@1524] 07/30/2026 20:29:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1960.1894132, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.434146984684089, Elapsed = 00:32:40.2319448, TimeTotal = 08:27:46.0734277, Remaining = 07:55:05.8414829, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:28.1545343, WeightTotalEstimate = 02:38:28.1545343, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:26.0308961, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:40.2319448, HeatingEstimate = 00:37:19.8105868, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:09.6527951, WeightEstimate = 02:38:28.1545343 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:54. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:29:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.434146984684089;StartedAtUtc;00:32:40.2319448;08:27:46.0734277;07:55:05.8414829;False;408;0;0;00:00:00;02:38:28.1545343;02:38:28.1545343;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:26.0308961;00:00:00;02:00:00;00:32:40.2319448;00:37:19.8105868;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:09.6527951 [PrintingService.cs@1918] 07/30/2026 20:29:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=174.91666666666666,printChamber1=174.91666666666666,printChamber2=174.91666666666666,printChamber3=174.91666666666666,printChamber4=174.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:29:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 70, island count 12 [PrintingService.cs@1569] 07/30/2026 20:29:48 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 118, start=0, count=408, Z=11.801001 [PrintingService.cs@1518] 07/30/2026 20:29:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 174.91667 with temperature 169.5 [HeaterCheck.cs@88] 07/30/2026 20:29:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3755, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:29:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 174.91667 with temperature 170 [HeaterCheck.cs@67] 07/30/2026 20:29:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 76.916664 with temperature 72.25 [HeaterCheck.cs@67] 07/30/2026 20:29:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 174.91667 with temperature 170.25 [HeaterCheck.cs@67] 07/30/2026 20:29:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 174.91667 with temperature 170 [HeaterCheck.cs@67] 07/30/2026 20:29:52 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderBed=66,powderChamber4=66.5 that are outside of set tolerance 10 for current step target 76.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:29:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 174.91667 with temperature 170.5 [HeaterCheck.cs@67] 07/30/2026 20:29:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 76.916664 with temperature 66.35713958740234 [HeaterCheck.cs@111] 07/30/2026 20:29:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 76.916664 with temperature 72.5 [HeaterCheck.cs@67] 07/30/2026 20:29:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1967.6905259, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.458476594939781, Elapsed = 00:32:47.7330249, TimeTotal = 08:27:47.4484141, Remaining = 07:54:59.7153892, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:47.7330249, HeatingEstimate = 00:37:12.3094741, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:29:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.458476594939781;StartedAtUtc;00:32:47.7330249;08:27:47.4484141;07:54:59.7153892;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:47.7330249;00:37:12.3094741;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:29:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=175,printChamber1=175,printChamber2=175,printChamber3=175,printChamber4=175 [ControlledHeating.cs@169] 07/30/2026 20:29:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1967.6911375, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.458478503774298, Elapsed = 00:32:47.7336044, TimeTotal = 08:27:47.4483820, Remaining = 07:54:59.7147776, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:47.7336044, HeatingEstimate = 00:37:12.3088625, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:29:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.458478503774298;StartedAtUtc;00:32:47.7336044;08:27:47.4483820;07:54:59.7147776;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:47.7336044;00:37:12.3088625;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:29:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1299256 ~ 6 samples/sec, 5 resets, 11 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:29:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1968.6986248, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.461785869614384, Elapsed = 00:32:48.7412870, TimeTotal = 08:27:47.4485773, Remaining = 07:54:58.7072903, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:48.7412870, HeatingEstimate = 00:37:11.3013752, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:29:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.461785869614384;StartedAtUtc;00:32:48.7412870;08:27:47.4485773;07:54:58.7072903;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:48.7412870;00:37:11.3013752;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:29:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1969.6996025, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.4650713496013505, Elapsed = 00:32:49.7422906, TimeTotal = 08:27:47.4486032, Remaining = 07:54:57.7063126, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:49.7422906, HeatingEstimate = 00:37:10.3003975, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:29:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.4650713496013505;StartedAtUtc;00:32:49.7422906;08:27:47.4486032;07:54:57.7063126;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:49.7422906;00:37:10.3003975;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:29:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 76.916664 with temperature 72.5 [HeaterCheck.cs@67] 07/30/2026 20:29:58 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/30/2026 20:29:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1970.7056299, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.468373296525938, Elapsed = 00:32:50.7483090, TimeTotal = 08:27:47.4485942, Remaining = 07:54:56.7002852, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:50.7483090, HeatingEstimate = 00:37:09.2943701, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:29:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.468373296525938;StartedAtUtc;00:32:50.7483090;08:27:47.4485942;07:54:56.7002852;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:50.7483090;00:37:09.2943701;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:29:59 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/30/2026 20:29:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/30/2026 20:29:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/30/2026 20:29:59 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/30/2026 20:29:59 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/30/2026 20:29:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1971.7064366, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.471657625239163, Elapsed = 00:32:51.7489494, TimeTotal = 08:27:47.4484279, Remaining = 07:54:55.6994785, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:51.7489494, HeatingEstimate = 00:37:08.2935634, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:29:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.471657625239163;StartedAtUtc;00:32:51.7489494;08:27:47.4484279;07:54:55.6994785;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:51.7489494;00:37:08.2935634;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:30:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 170.5 [HeaterCheck.cs@67] 07/30/2026 20:30:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1972.7071562, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.474942588089909, Elapsed = 00:32:52.7498024, TimeTotal = 08:27:47.4485613, Remaining = 07:54:54.6987589, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:52.7498024, HeatingEstimate = 00:37:07.2928438, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.474942588089909;StartedAtUtc;00:32:52.7498024;08:27:47.4485613;07:54:54.6987589;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:52.7498024;00:37:07.2928438;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:30:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1973.7082533, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.478228455356732, Elapsed = 00:32:53.7509239, TimeTotal = 08:27:47.4485857, Remaining = 07:54:53.6976618, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:53.7509239, HeatingEstimate = 00:37:06.2917467, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.478228455356732;StartedAtUtc;00:32:53.7509239;08:27:47.4485857;07:54:53.6976618;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:53.7509239;00:37:06.2917467;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:30:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 76.916664 with temperature 73 [HeaterCheck.cs@67] 07/30/2026 20:30:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1974.7130708, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.481525929307683, Elapsed = 00:32:54.7555689, TimeTotal = 08:27:47.4484132, Remaining = 07:54:52.6928443, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:54.7555689, HeatingEstimate = 00:37:05.2869292, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.481525929307683;StartedAtUtc;00:32:54.7555689;08:27:47.4484132;07:54:52.6928443;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:54.7555689;00:37:05.2869292;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:30:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 07/30/2026 20:30:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1975.7133625, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.484809545063872, Elapsed = 00:32:55.7560127, TimeTotal = 08:27:47.4485653, Remaining = 07:54:51.6925526, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:55.7560127, HeatingEstimate = 00:37:04.2866375, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.484809545063872;StartedAtUtc;00:32:55.7560127;08:27:47.4485653;07:54:51.6925526;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:55.7560127;00:37:04.2866375;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:30:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 07/30/2026 20:30:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] no longer approaching new target of 175 with temperature 167.25 [HeaterCheck.cs@111] 07/30/2026 20:30:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1976.7136666, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.488092233755125, Elapsed = 00:32:56.7561536, TimeTotal = 08:27:47.4484021, Remaining = 07:54:50.6922485, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:56.7561536, HeatingEstimate = 00:37:03.2863334, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.488092233755125;StartedAtUtc;00:32:56.7561536;08:27:47.4484021;07:54:50.6922485;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:56.7561536;00:37:03.2863334;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:30:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1977.7129037, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.491372622562297, Elapsed = 00:32:57.7556192, TimeTotal = 08:27:47.4486306, Remaining = 07:54:49.6930114, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:57.7556192, HeatingEstimate = 00:37:02.2870963, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.491372622562297;StartedAtUtc;00:32:57.7556192;08:27:47.4486306;07:54:49.6930114;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:57.7556192;00:37:02.2870963;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:30:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1978.7131149, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.494654822224613, Elapsed = 00:32:58.7556072, TimeTotal = 08:27:47.4484074, Remaining = 07:54:48.6928002, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:58.7556072, HeatingEstimate = 00:37:01.2868851, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.494654822224613;StartedAtUtc;00:32:58.7556072;08:27:47.4484074;07:54:48.6928002;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:58.7556072;00:37:01.2868851;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:30:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1979.7137838, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.497939199355751, Elapsed = 00:32:59.7562729, TimeTotal = 08:27:47.4484042, Remaining = 07:54:47.6921313, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:32:59.7562729, HeatingEstimate = 00:37:00.2862162, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.497939199355751;StartedAtUtc;00:32:59.7562729;08:27:47.4484042;07:54:47.6921313;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:32:59.7562729;00:37:00.2862162;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:30:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 175 with temperature 170.75 [HeaterCheck.cs@67] 07/30/2026 20:30:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1980.7141594, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.501222646043307, Elapsed = 00:33:00.7566558, TimeTotal = 08:27:47.4484115, Remaining = 07:54:46.6917557, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:00.7566558, HeatingEstimate = 00:36:59.2858406, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.501222646043307;StartedAtUtc;00:33:00.7566558;08:27:47.4484115;07:54:46.6917557;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:33:00.7566558;00:36:59.2858406;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:30:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=134674, estimate=39.495500171560295 for layer 118, Z=11.801001 [PrintingService.cs@1524] 07/30/2026 20:30:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1981.7178194, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.504517010543695, Elapsed = 00:33:01.7603680, TimeTotal = 08:27:47.4484637, Remaining = 07:54:45.6880957, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:29.5295533, WeightTotalEstimate = 02:38:29.5295533, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:27.4059151, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:01.7603680, HeatingEstimate = 00:36:58.2821806, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:11.0278141, WeightEstimate = 02:38:29.5295533 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:24:55. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.504517010543695;StartedAtUtc;00:33:01.7603680;08:27:47.4484637;07:54:45.6880957;False;408;0;0;00:00:00;02:38:29.5295533;02:38:29.5295533;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:27.4059151;00:00:00;02:00:00;00:33:01.7603680;00:36:58.2821806;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:11.0278141 [PrintingService.cs@1918] 07/30/2026 20:30:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 71, island count 12 [PrintingService.cs@1569] 07/30/2026 20:30:09 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 119, start=0, count=408, Z=11.901001 [PrintingService.cs@1518] 07/30/2026 20:30:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3179, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:30:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1982.719465, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.505362579398318, Elapsed = 00:33:02.7621561, TimeTotal = 08:27:58.8877161, Remaining = 07:54:56.1255600, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:02.7621561, HeatingEstimate = 00:36:57.2805350, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.505362579398318;StartedAtUtc;00:33:02.7621561;08:27:58.8877161;07:54:56.1255600;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:02.7621561;00:36:57.2805350;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1983.7234071, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.508658355978825, Elapsed = 00:33:03.7667121, TimeTotal = 08:27:58.8883300, Remaining = 07:54:55.1216179, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:03.7667121, HeatingEstimate = 00:36:56.2765929, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.508658355978825;StartedAtUtc;00:33:03.7667121;08:27:58.8883300;07:54:55.1216179;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:03.7667121;00:36:56.2765929;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 170.5 [HeaterCheck.cs@67] 07/30/2026 20:30:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 76.916664 with temperature 72.5 [HeaterCheck.cs@67] 07/30/2026 20:30:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 175 with temperature 170.5 [HeaterCheck.cs@67] 07/30/2026 20:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1984.7275852, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.51195056803004, Elapsed = 00:33:04.7700896, TimeTotal = 08:27:58.8875294, Remaining = 07:54:54.1174398, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:04.7700896, HeatingEstimate = 00:36:55.2724148, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.51195056803004;StartedAtUtc;00:33:04.7700896;08:27:58.8875294;07:54:54.1174398;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:04.7700896;00:36:55.2724148;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 07/30/2026 20:30:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1985.7262552, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.5152271244315845, Elapsed = 00:33:05.7687467, TimeTotal = 08:27:58.8875165, Remaining = 07:54:53.1187698, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:05.7687467, HeatingEstimate = 00:36:54.2737448, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.5152271244315845;StartedAtUtc;00:33:05.7687467;08:27:58.8875165;07:54:53.1187698;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:05.7687467;00:36:54.2737448;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 76.916664 with temperature 72.5 [HeaterCheck.cs@67] 07/30/2026 20:30:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 175 with temperature 170.25 [HeaterCheck.cs@67] 07/30/2026 20:30:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1986.7264887, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.518508907229646, Elapsed = 00:33:06.7689988, TimeTotal = 08:27:58.8875351, Remaining = 07:54:52.1185363, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:06.7689988, HeatingEstimate = 00:36:53.2735113, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.518508907229646;StartedAtUtc;00:33:06.7689988;08:27:58.8875351;07:54:52.1185363;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:06.7689988;00:36:53.2735113;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 175 with temperature 170.25 [HeaterCheck.cs@67] 07/30/2026 20:30:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 07/30/2026 20:30:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1987.7300164, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.521801462890664, Elapsed = 00:33:07.7725336, TimeTotal = 08:27:58.8875422, Remaining = 07:54:51.1150086, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:07.7725336, HeatingEstimate = 00:36:52.2699836, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.521801462890664;StartedAtUtc;00:33:07.7725336;08:27:58.8875422;07:54:51.1150086;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:07.7725336;00:36:52.2699836;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 170.5 [HeaterCheck.cs@67] 07/30/2026 20:30:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1988.7302254, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.525101595675885, Elapsed = 00:33:08.7787707, TimeTotal = 08:27:58.8935703, Remaining = 07:54:50.1147996, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:08.7787707, HeatingEstimate = 00:36:51.2697746, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.525101595675885;StartedAtUtc;00:33:08.7787707;08:27:58.8935703;07:54:50.1147996;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:08.7787707;00:36:51.2697746;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 175 with temperature 170.75 [HeaterCheck.cs@67] 07/30/2026 20:30:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1989.7395811, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.528395360364645, Elapsed = 00:33:09.7822929, TimeTotal = 08:27:58.8877368, Remaining = 07:54:49.1054439, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:09.7822929, HeatingEstimate = 00:36:50.2604189, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.528395360364645;StartedAtUtc;00:33:09.7822929;08:27:58.8877368;07:54:49.1054439;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:09.7822929;00:36:50.2604189;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1990.7456479, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.531695563741559, Elapsed = 00:33:10.7881441, TimeTotal = 08:27:58.8875212, Remaining = 07:54:48.0993771, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:10.7881441, HeatingEstimate = 00:36:49.2543521, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.531695563741559;StartedAtUtc;00:33:10.7881441;08:27:58.8875212;07:54:48.0993771;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:10.7881441;00:36:49.2543521;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1991.7489623, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.534987990563798, Elapsed = 00:33:11.7916518, TimeTotal = 08:27:58.8877145, Remaining = 07:54:47.0960627, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:11.7916518, HeatingEstimate = 00:36:48.2510377, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.534987990563798;StartedAtUtc;00:33:11.7916518;08:27:58.8877145;07:54:47.0960627;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:11.7916518;00:36:48.2510377;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1992.7518506, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.538277834761096, Elapsed = 00:33:12.7943471, TimeTotal = 08:27:58.8875215, Remaining = 07:54:46.0931744, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:12.7943471, HeatingEstimate = 00:36:47.2481494, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.538277834761096;StartedAtUtc;00:33:12.7943471;08:27:58.8875215;07:54:46.0931744;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:12.7943471;00:36:47.2481494;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1993.7486217, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.541548199289536, Elapsed = 00:33:13.7911178, TimeTotal = 08:27:58.8875211, Remaining = 07:54:45.0964033, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:13.7911178, HeatingEstimate = 00:36:46.2513783, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.541548199289536;StartedAtUtc;00:33:13.7911178;08:27:58.8875211;07:54:45.0964033;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:13.7911178;00:36:46.2513783;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1994.7503091, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.5448355093095225, Elapsed = 00:33:14.7930707, TimeTotal = 08:27:58.8877866, Remaining = 07:54:44.0947159, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:14.7930707, HeatingEstimate = 00:36:45.2496909, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.5448355093095225;StartedAtUtc;00:33:14.7930707;08:27:58.8877866;07:54:44.0947159;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:14.7930707;00:36:45.2496909;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1995.7530856, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.548124776414391, Elapsed = 00:33:15.7955856, TimeTotal = 08:27:58.8875250, Remaining = 07:54:43.0919394, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:15.7955856, HeatingEstimate = 00:36:44.2469144, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.548124776414391;StartedAtUtc;00:33:15.7955856;08:27:58.8875250;07:54:43.0919394;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:15.7955856;00:36:44.2469144;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1996.7557632, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.551414580331133, Elapsed = 00:33:16.7982825, TimeTotal = 08:27:58.8875443, Remaining = 07:54:42.0892618, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:16.7982825, HeatingEstimate = 00:36:43.2442368, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.551414580331133;StartedAtUtc;00:33:16.7982825;08:27:58.8875443;07:54:42.0892618;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:16.7982825;00:36:43.2442368;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1997.7589627, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.554706168012071, Elapsed = 00:33:17.8015246, TimeTotal = 08:27:58.8875869, Remaining = 07:54:41.0860623, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:17.8015246, HeatingEstimate = 00:36:42.2410373, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.554706168012071;StartedAtUtc;00:33:17.8015246;08:27:58.8875869;07:54:41.0860623;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:17.8015246;00:36:42.2410373;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1998.7608204, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.557993004098176, Elapsed = 00:33:18.8033110, TimeTotal = 08:27:58.8875156, Remaining = 07:54:40.0842046, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:18.8033110, HeatingEstimate = 00:36:41.2391796, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.557993004098176;StartedAtUtc;00:33:18.8033110;08:27:58.8875156;07:54:40.0842046;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:18.8033110;00:36:41.2391796;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1999.7613105, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.5612755781806475, Elapsed = 00:33:19.8038032, TimeTotal = 08:27:58.8875177, Remaining = 07:54:39.0837145, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:19.8038032, HeatingEstimate = 00:36:40.2386895, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.5612755781806475;StartedAtUtc;00:33:19.8038032;08:27:58.8875177;07:54:39.0837145;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:19.8038032;00:36:40.2386895;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2000.7645284, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.564567132720178, Elapsed = 00:33:20.8070332, TimeTotal = 08:27:58.8875298, Remaining = 07:54:38.0804966, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:20.8070332, HeatingEstimate = 00:36:39.2354716, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.564567132720178;StartedAtUtc;00:33:20.8070332;08:27:58.8875298;07:54:38.0804966;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:20.8070332;00:36:39.2354716;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2001.7690142, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.567862822662063, Elapsed = 00:33:21.8115231, TimeTotal = 08:27:58.8875339, Remaining = 07:54:37.0760108, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:21.8115231, HeatingEstimate = 00:36:38.2309858, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.567862822662063;StartedAtUtc;00:33:21.8115231;08:27:58.8875339;07:54:37.0760108;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:21.8115231;00:36:38.2309858;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2002.769899, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.571149418376941, Elapsed = 00:33:22.8132995, TimeTotal = 08:27:58.8884255, Remaining = 07:54:36.0751260, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:22.8132995, HeatingEstimate = 00:36:37.2301010, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.571149418376941;StartedAtUtc;00:33:22.8132995;08:27:58.8884255;07:54:36.0751260;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:22.8132995;00:36:37.2301010;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:31 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=164.75 that are outside of set tolerance 10 for current step target 175 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:30:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2004.7698821, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.5777085286031625, Elapsed = 00:33:24.8123843, TimeTotal = 08:27:58.8875272, Remaining = 07:54:34.0751429, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:40.9686632, WeightTotalEstimate = 02:38:40.9686632, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:38.8450250, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:24.8123843, HeatingEstimate = 00:36:35.2301179, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:22.4669240, WeightEstimate = 02:38:40.9686632 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:07. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.5777085286031625;StartedAtUtc;00:33:24.8123843;08:27:58.8875272;07:54:34.0751429;False;408;0;0;00:00:00;02:38:40.9686632;02:38:40.9686632;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:38.8450250;00:00:00;02:00:00;00:33:24.8123843;00:36:35.2301179;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:22.4669240 [PrintingService.cs@1918] 07/30/2026 20:30:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=173845, estimate=37.42580767010121 for layer 119, Z=11.901001 [PrintingService.cs@1524] 07/30/2026 20:30:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 72, island count 12 [PrintingService.cs@1569] 07/30/2026 20:30:33 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 120, start=0, count=408, Z=12.001 [PrintingService.cs@1518] 07/30/2026 20:30:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2005.7751728, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.580658953983261, Elapsed = 00:33:25.8178924, TimeTotal = 08:28:00.5021264, Remaining = 07:54:34.6842340, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:25.8178924, HeatingEstimate = 00:36:34.2248272, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.580658953983261;StartedAtUtc;00:33:25.8178924;08:28:00.5021264;07:54:34.6842340;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:25.8178924;00:36:34.2248272;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2962, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:30:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2006.7756399, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.583941047330885, Elapsed = 00:33:26.8182861, TimeTotal = 08:28:00.5020530, Remaining = 07:54:33.6837669, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:26.8182861, HeatingEstimate = 00:36:33.2243601, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.583941047330885;StartedAtUtc;00:33:26.8182861;08:28:00.5020530;07:54:33.6837669;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:26.8182861;00:36:33.2243601;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2007.7836214, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.587248073636193, Elapsed = 00:33:27.8262855, TimeTotal = 08:28:00.5020709, Remaining = 07:54:32.6757854, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:27.8262855, HeatingEstimate = 00:36:32.2163786, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.587248073636193;StartedAtUtc;00:33:27.8262855;08:28:00.5020709;07:54:32.6757854;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:27.8262855;00:36:32.2163786;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2008.7875972, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.590541454892272, Elapsed = 00:33:28.8301150, TimeTotal = 08:28:00.5019246, Remaining = 07:54:31.6718096, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:28.8301150, HeatingEstimate = 00:36:31.2124028, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.590541454892272;StartedAtUtc;00:33:28.8301150;08:28:00.5019246;07:54:31.6718096;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:28.8301150;00:36:31.2124028;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2009.7863153, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.593827272926223, Elapsed = 00:33:29.8318476, TimeTotal = 08:28:00.5049391, Remaining = 07:54:30.6730915, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:29.8318476, HeatingEstimate = 00:36:30.2136847, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.593827272926223;StartedAtUtc;00:33:29.8318476;08:28:00.5049391;07:54:30.6730915;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:29.8318476;00:36:30.2136847;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:39 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=164.5 that are outside of set tolerance 10 for current step target 175 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:30:39 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=77.91666666666666,powderChamber1=77.91666666666666,powderChamber2=77.91666666666666,powderChamber3=77.91666666666666,powderChamber4=77.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:30:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] approaching new target of 77.916664 with temperature 72.5 [HeaterCheck.cs@88] 07/30/2026 20:30:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2011.7889041, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.600388079015626, Elapsed = 00:33:31.8314150, TimeTotal = 08:28:00.5019177, Remaining = 07:54:28.6705027, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:31.8314150, HeatingEstimate = 00:36:28.2110959, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.600388079015626;StartedAtUtc;00:33:31.8314150;08:28:00.5019177;07:54:28.6705027;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:31.8314150;00:36:28.2110959;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73 [HeaterCheck.cs@67] 07/30/2026 20:30:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2012.7896408, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.603671225460451, Elapsed = 00:33:32.8321333, TimeTotal = 08:28:00.5018993, Remaining = 07:54:27.6697660, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:32.8321333, HeatingEstimate = 00:36:27.2103592, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.603671225460451;StartedAtUtc;00:33:32.8321333;08:28:00.5018993;07:54:27.6697660;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:32.8321333;00:36:27.2103592;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2013.7927823, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.606963075348296, Elapsed = 00:33:33.8355220, TimeTotal = 08:28:00.5021465, Remaining = 07:54:26.6666245, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:33.8355220, HeatingEstimate = 00:36:26.2072177, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.606963075348296;StartedAtUtc;00:33:33.8355220;08:28:00.5021465;07:54:26.6666245;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:33.8355220;00:36:26.2072177;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73 [HeaterCheck.cs@67] 07/30/2026 20:30:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2014.7933915, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.610245146874652, Elapsed = 00:33:34.8358985, TimeTotal = 08:28:00.5019138, Remaining = 07:54:25.6660153, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:34.8358985, HeatingEstimate = 00:36:25.2066085, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.610245146874652;StartedAtUtc;00:33:34.8358985;08:28:00.5019138;07:54:25.6660153;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:34.8358985;00:36:25.2066085;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2015.7966857, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.613536793620109, Elapsed = 00:33:35.8392101, TimeTotal = 08:28:00.5019312, Remaining = 07:54:24.6627211, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:35.8392101, HeatingEstimate = 00:36:24.2033143, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.613536793620109;StartedAtUtc;00:33:35.8392101;08:28:00.5019312;07:54:24.6627211;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:35.8392101;00:36:24.2033143;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73 [HeaterCheck.cs@67] 07/30/2026 20:30:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2016.799157, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.61682558772439, Elapsed = 00:33:36.8416489, TimeTotal = 08:28:00.5018987, Remaining = 07:54:23.6602498, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:36.8416489, HeatingEstimate = 00:36:23.2008430, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.61682558772439;StartedAtUtc;00:33:36.8416489;08:28:00.5018987;07:54:23.6602498;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:36.8416489;00:36:23.2008430;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 175 with temperature 170.75 [HeaterCheck.cs@67] 07/30/2026 20:30:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2017.7981974, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.6201032271924, Elapsed = 00:33:37.8406899, TimeTotal = 08:28:00.5018993, Remaining = 07:54:22.6612094, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:37.8406899, HeatingEstimate = 00:36:22.2018026, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.6201032271924;StartedAtUtc;00:33:37.8406899;08:28:00.5018993;07:54:22.6612094;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:37.8406899;00:36:22.2018026;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2018.7996018, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.6233962872811105, Elapsed = 00:33:38.8445969, TimeTotal = 08:28:00.5044019, Remaining = 07:54:21.6598050, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:38.8445969, HeatingEstimate = 00:36:21.2003982, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.6233962872811105;StartedAtUtc;00:33:38.8445969;08:28:00.5044019;07:54:21.6598050;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:38.8445969;00:36:21.2003982;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73.25 [HeaterCheck.cs@67] 07/30/2026 20:30:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderBed=67.14286041259766 that are outside of set tolerance 10 for current step target 77.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:30:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2019.8028558, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.626680653469251, Elapsed = 00:33:39.8455348, TimeTotal = 08:28:00.5020858, Remaining = 07:54:20.6565510, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:39.8455348, HeatingEstimate = 00:36:20.1971442, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.626680653469251;StartedAtUtc;00:33:39.8455348;08:28:00.5020858;07:54:20.6565510;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:39.8455348;00:36:20.1971442;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2020.80453, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.62996694579748, Elapsed = 00:33:40.8472135, TimeTotal = 08:28:00.5020903, Remaining = 07:54:19.6548768, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:40.8472135, HeatingEstimate = 00:36:19.1954700, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.62996694579748;StartedAtUtc;00:33:40.8472135;08:28:00.5020903;07:54:19.6548768;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:40.8472135;00:36:19.1954700;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2021.8075351, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.633257003530069, Elapsed = 00:33:41.8500269, TimeTotal = 08:28:00.5018986, Remaining = 07:54:18.6518717, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:41.8500269, HeatingEstimate = 00:36:18.1924649, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.633257003530069;StartedAtUtc;00:33:41.8500269;08:28:00.5018986;07:54:18.6518717;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:41.8500269;00:36:18.1924649;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73 [HeaterCheck.cs@67] 07/30/2026 20:30:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2022.8051584, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.636529999922218, Elapsed = 00:33:42.8476528, TimeTotal = 08:28:00.5019012, Remaining = 07:54:17.6542484, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:42.8476528, HeatingEstimate = 00:36:17.1948416, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.636529999922218;StartedAtUtc;00:33:42.8476528;08:28:00.5019012;07:54:17.6542484;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:42.8476528;00:36:17.1948416;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73.25 [HeaterCheck.cs@67] 07/30/2026 20:30:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2023.8085735, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.639822038400327, Elapsed = 00:33:43.8510837, TimeTotal = 08:28:00.5019170, Remaining = 07:54:16.6508333, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:43.8510837, HeatingEstimate = 00:36:16.1914265, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.639822038400327;StartedAtUtc;00:33:43.8510837;08:28:00.5019170;07:54:16.6508333;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:43.8510837;00:36:16.1914265;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2024.8128075, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.643117303795442, Elapsed = 00:33:44.8555099, TimeTotal = 08:28:00.5021092, Remaining = 07:54:15.6465993, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:44.8555099, HeatingEstimate = 00:36:15.1871925, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.643117303795442;StartedAtUtc;00:33:44.8555099;08:28:00.5021092;07:54:15.6465993;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:44.8555099;00:36:15.1871925;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73 [HeaterCheck.cs@67] 07/30/2026 20:30:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2025.8185605, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.646416337983503, Elapsed = 00:33:45.8610585, TimeTotal = 08:28:00.5019048, Remaining = 07:54:14.6408463, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:45.8610585, HeatingEstimate = 00:36:14.1814395, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.646416337983503;StartedAtUtc;00:33:45.8610585;08:28:00.5019048;07:54:14.6408463;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:45.8610585;00:36:14.1814395;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 07/30/2026 20:30:55 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=164.5 that are outside of set tolerance 10 for current step target 175 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:30:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2027.82372, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.652994882266072, Elapsed = 00:33:47.8662328, TimeTotal = 08:28:00.5019196, Remaining = 07:54:12.6356868, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:47.8662328, HeatingEstimate = 00:36:12.1762800, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.652994882266072;StartedAtUtc;00:33:47.8662328;08:28:00.5019196;07:54:12.6356868;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:47.8662328;00:36:12.1762800;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73.25 [HeaterCheck.cs@67] 07/30/2026 20:30:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0363882 ~ 6.01 samples/sec, 5 resets, 11 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:30:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=138597, estimate=38.21031550663597 for layer 120, Z=12.001 [PrintingService.cs@1524] 07/30/2026 20:30:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2028.8215562, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.656268528135067, Elapsed = 00:33:48.8640556, TimeTotal = 08:28:00.5019062, Remaining = 07:54:11.6378506, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:42.5830450, WeightTotalEstimate = 02:38:42.5830450, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:40.4594068, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:48.8640556, HeatingEstimate = 00:36:11.1784438, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:24.0813058, WeightEstimate = 02:38:42.5830450 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.656268528135067;StartedAtUtc;00:33:48.8640556;08:28:00.5019062;07:54:11.6378506;False;408;0;0;00:00:00;02:38:42.5830450;02:38:42.5830450;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:40.4594068;00:00:00;02:00:00;00:33:48.8640556;00:36:11.1784438;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:24.0813058 [PrintingService.cs@1918] 07/30/2026 20:30:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 73, island count 12 [PrintingService.cs@1569] 07/30/2026 20:30:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 121, start=0, count=408, Z=12.101001 [PrintingService.cs@1518] 07/30/2026 20:30:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2838, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:30:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2029.8235658, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.658949112334467, Elapsed = 00:33:49.8660602, TimeTotal = 08:28:03.2793577, Remaining = 07:54:13.4132975, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:49.8660602, HeatingEstimate = 00:36:10.1764342, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.658949112334467;StartedAtUtc;00:33:49.8660602;08:28:03.2793577;07:54:13.4132975;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:33:49.8660602;00:36:10.1764342;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:30:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73 [HeaterCheck.cs@67] 07/30/2026 20:30:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2030.839549, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.662282111875699, Elapsed = 00:33:50.8820695, TimeTotal = 08:28:03.2793838, Remaining = 07:54:12.3973143, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:50.8820695, HeatingEstimate = 00:36:09.1604510, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:30:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.662282111875699;StartedAtUtc;00:33:50.8820695;08:28:03.2793838;07:54:12.3973143;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:33:50.8820695;00:36:09.1604510;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:30:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73 [HeaterCheck.cs@67] 07/30/2026 20:30:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73 [HeaterCheck.cs@67] 07/30/2026 20:31:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2031.8425324, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.665572298867704, Elapsed = 00:33:51.8850245, TimeTotal = 08:28:03.2793554, Remaining = 07:54:11.3943309, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:51.8850245, HeatingEstimate = 00:36:08.1574676, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.665572298867704;StartedAtUtc;00:33:51.8850245;08:28:03.2793554;07:54:11.3943309;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:33:51.8850245;00:36:08.1574676;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2032.8422478, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.668863156041819, Elapsed = 00:33:52.8884319, TimeTotal = 08:28:03.2830474, Remaining = 07:54:10.3946155, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:52.8884319, HeatingEstimate = 00:36:07.1577522, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.668863156041819;StartedAtUtc;00:33:52.8884319;08:28:03.2830474;07:54:10.3946155;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:33:52.8884319;00:36:07.1577522;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2033.8484453, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.672152857627747, Elapsed = 00:33:53.8909987, TimeTotal = 08:28:03.2794167, Remaining = 07:54:09.3884180, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:53.8909987, HeatingEstimate = 00:36:06.1515547, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.672152857627747;StartedAtUtc;00:33:53.8909987;08:28:03.2794167;07:54:09.3884180;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:33:53.8909987;00:36:06.1515547;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 77.916664 with temperature 67 [HeaterCheck.cs@111] 07/30/2026 20:31:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2034.8490194, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.6754350432863525, Elapsed = 00:33:54.8915125, TimeTotal = 08:28:03.2793564, Remaining = 07:54:08.3878439, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:54.8915125, HeatingEstimate = 00:36:05.1509806, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.6754350432863525;StartedAtUtc;00:33:54.8915125;08:28:03.2793564;07:54:08.3878439;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:33:54.8915125;00:36:05.1509806;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73 [HeaterCheck.cs@67] 07/30/2026 20:31:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 07/30/2026 20:31:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 07/30/2026 20:31:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2035.8523587, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.678726478945768, Elapsed = 00:33:55.8948499, TimeTotal = 08:28:03.2793545, Remaining = 07:54:07.3845046, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:55.8948499, HeatingEstimate = 00:36:04.1476413, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.678726478945768;StartedAtUtc;00:33:55.8948499;08:28:03.2793545;07:54:07.3845046;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:33:55.8948499;00:36:04.1476413;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73.25 [HeaterCheck.cs@67] 07/30/2026 20:31:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2036.8530929, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.682009386670627, Elapsed = 00:33:56.8955881, TimeTotal = 08:28:03.2793585, Remaining = 07:54:06.3837704, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:56.8955881, HeatingEstimate = 00:36:03.1469071, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.682009386670627;StartedAtUtc;00:33:56.8955881;08:28:03.2793585;07:54:06.3837704;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:33:56.8955881;00:36:03.1469071;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2037.8595819, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.685311164675724, Elapsed = 00:33:57.9020784, TimeTotal = 08:28:03.2793598, Remaining = 07:54:05.3772814, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:57.9020784, HeatingEstimate = 00:36:02.1404181, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.685311164675724;StartedAtUtc;00:33:57.9020784;08:28:03.2793598;07:54:05.3772814;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:33:57.9020784;00:36:02.1404181;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2038.8575603, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.688585020095057, Elapsed = 00:33:58.9000569, TimeTotal = 08:28:03.2793599, Remaining = 07:54:04.3793030, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:58.9000569, HeatingEstimate = 00:36:01.1424397, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.688585020095057;StartedAtUtc;00:33:58.9000569;08:28:03.2793599;07:54:04.3793030;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:33:58.9000569;00:36:01.1424397;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 171 [HeaterCheck.cs@67] 07/30/2026 20:31:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73.75 [HeaterCheck.cs@67] 07/30/2026 20:31:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2039.8591628, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.691870804731795, Elapsed = 00:33:59.9016727, TimeTotal = 08:28:03.2793732, Remaining = 07:54:03.3777005, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:33:59.9016727, HeatingEstimate = 00:36:00.1408372, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.691870804731795;StartedAtUtc;00:33:59.9016727;08:28:03.2793732;07:54:03.3777005;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:33:59.9016727;00:36:00.1408372;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2040.8571667, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.695145383520481, Elapsed = 00:34:00.8998857, TimeTotal = 08:28:03.2795823, Remaining = 07:54:02.3796966, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:00.8998857, HeatingEstimate = 00:35:59.1428333, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.695145383520481;StartedAtUtc;00:34:00.8998857;08:28:03.2795823;07:54:02.3796966;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:00.8998857;00:35:59.1428333;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2041.8575925, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.698426581360345, Elapsed = 00:34:01.9000874, TimeTotal = 08:28:03.2793582, Remaining = 07:54:01.3792708, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:01.9000874, HeatingEstimate = 00:35:58.1424075, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.698426581360345;StartedAtUtc;00:34:01.9000874;08:28:03.2793582;07:54:01.3792708;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:01.9000874;00:35:58.1424075;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73.25 [HeaterCheck.cs@67] 07/30/2026 20:31:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2042.8569919, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.70170611203518, Elapsed = 00:34:02.8998181, TimeTotal = 08:28:03.2796895, Remaining = 07:54:00.3798714, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:02.8998181, HeatingEstimate = 00:35:57.1430081, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.70170611203518;StartedAtUtc;00:34:02.8998181;08:28:03.2796895;07:54:00.3798714;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:02.8998181;00:35:57.1430081;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73.25 [HeaterCheck.cs@67] 07/30/2026 20:31:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2043.8603985, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.70499674499568, Elapsed = 00:34:03.9028884, TimeTotal = 08:28:03.2793532, Remaining = 07:53:59.3764648, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:03.9028884, HeatingEstimate = 00:35:56.1396015, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.70499674499568;StartedAtUtc;00:34:03.9028884;08:28:03.2793532;07:53:59.3764648;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:03.9028884;00:35:56.1396015;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2044.8613683, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.708280427130169, Elapsed = 00:34:04.9038627, TimeTotal = 08:28:03.2793577, Remaining = 07:53:58.3754950, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:04.9038627, HeatingEstimate = 00:35:55.1386317, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.708280427130169;StartedAtUtc;00:34:04.9038627;08:28:03.2793577;07:53:58.3754950;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:04.9038627;00:35:55.1386317;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2045.8657555, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.71157539252923, Elapsed = 00:34:05.9082781, TimeTotal = 08:28:03.2793859, Remaining = 07:53:57.3711078, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:05.9082781, HeatingEstimate = 00:35:54.1342445, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.71157539252923;StartedAtUtc;00:34:05.9082781;08:28:03.2793859;07:53:57.3711078;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:05.9082781;00:35:54.1342445;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2046.8728483, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.714879074782959, Elapsed = 00:34:06.9153472, TimeTotal = 08:28:03.2793622, Remaining = 07:53:56.3640150, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:06.9153472, HeatingEstimate = 00:35:53.1271517, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.714879074782959;StartedAtUtc;00:34:06.9153472;08:28:03.2793622;07:53:56.3640150;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:06.9153472;00:35:53.1271517;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2047.8758838, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.718169498225772, Elapsed = 00:34:07.9183757, TimeTotal = 08:28:03.2793552, Remaining = 07:53:55.3609795, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:07.9183757, HeatingEstimate = 00:35:52.1241162, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.718169498225772;StartedAtUtc;00:34:07.9183757;08:28:03.2793552;07:53:55.3609795;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:07.9183757;00:35:52.1241162;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2048.879715, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.721462550925499, Elapsed = 00:34:08.9222061, TimeTotal = 08:28:03.2793544, Remaining = 07:53:54.3571483, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:08.9222061, HeatingEstimate = 00:35:51.1202850, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.721462550925499;StartedAtUtc;00:34:08.9222061;08:28:03.2793544;07:53:54.3571483;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:08.9222061;00:35:51.1202850;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2049.8846839, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.724759787168004, Elapsed = 00:34:09.9273217, TimeTotal = 08:28:03.2795011, Remaining = 07:53:53.3521794, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:09.9273217, HeatingEstimate = 00:35:50.1153161, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.724759787168004;StartedAtUtc;00:34:09.9273217;08:28:03.2795011;07:53:53.3521794;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:09.9273217;00:35:50.1153161;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2050.8849015, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.728040608214382, Elapsed = 00:34:10.9274152, TimeTotal = 08:28:03.2793770, Remaining = 07:53:52.3519618, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:10.9274152, HeatingEstimate = 00:35:49.1150985, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.728040608214382;StartedAtUtc;00:34:10.9274152;08:28:03.2793770;07:53:52.3519618;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:10.9274152;00:35:49.1150985;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2051.8873581, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.731329093115028, Elapsed = 00:34:11.9298519, TimeTotal = 08:28:03.2793571, Remaining = 07:53:51.3495052, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:11.9298519, HeatingEstimate = 00:35:48.1126419, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.731329093115028;StartedAtUtc;00:34:11.9298519;08:28:03.2793571;07:53:51.3495052;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:11.9298519;00:35:48.1126419;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2052.8863683, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.734606329669461, Elapsed = 00:34:12.9288610, TimeTotal = 08:28:03.2793560, Remaining = 07:53:50.3504950, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:12.9288610, HeatingEstimate = 00:35:47.1136317, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.734606329669461;StartedAtUtc;00:34:12.9288610;08:28:03.2793560;07:53:50.3504950;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:12.9288610;00:35:47.1136317;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2053.8865122, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.737887778495749, Elapsed = 00:34:13.9291650, TimeTotal = 08:28:03.2795161, Remaining = 07:53:49.3503511, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:13.9291650, HeatingEstimate = 00:35:46.1134878, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.737887778495749;StartedAtUtc;00:34:13.9291650;08:28:03.2795161;07:53:49.3503511;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:13.9291650;00:35:46.1134878;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 175 with temperature 173.5 [HeaterCheck.cs@67] 07/30/2026 20:31:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73.25 [HeaterCheck.cs@67] 07/30/2026 20:31:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 77.916664 with temperature 73.25 [HeaterCheck.cs@67] 07/30/2026 20:31:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2054.8876581, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.741171525555583, Elapsed = 00:34:14.9301478, TimeTotal = 08:28:03.2793530, Remaining = 07:53:48.3492052, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:14.9301478, HeatingEstimate = 00:35:45.1123419, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.741171525555583;StartedAtUtc;00:34:14.9301478;08:28:03.2793530;07:53:48.3492052;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:14.9301478;00:35:45.1123419;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] no longer approaching new target of 77.916664 with temperature 67.03571319580078 [HeaterCheck.cs@111] 07/30/2026 20:31:23 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (60 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:31:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2055.8916576, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.744465147799747, Elapsed = 00:34:15.9341522, TimeTotal = 08:28:03.2793579, Remaining = 07:53:47.3452057, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:15.9341522, HeatingEstimate = 00:35:44.1083424, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.744465147799747;StartedAtUtc;00:34:15.9341522;08:28:03.2793579;07:53:47.3452057;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:15.9341522;00:35:44.1083424;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2056.8988294, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.747770636241181, Elapsed = 00:34:16.9418060, TimeTotal = 08:28:03.2798399, Remaining = 07:53:46.3380339, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:45.3605015, WeightTotalEstimate = 02:38:45.3605015, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:43.2368633, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:16.9418060, HeatingEstimate = 00:35:43.1011706, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:26.8587623, WeightEstimate = 02:38:45.3605015 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:11. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.747770636241181;StartedAtUtc;00:34:16.9418060;08:28:03.2798399;07:53:46.3380339;False;408;0;0;00:00:00;02:38:45.3605015;02:38:45.3605015;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:43.2368633;00:00:00;02:00:00;00:34:16.9418060;00:35:43.1011706;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:26.8587623 [PrintingService.cs@1918] 07/30/2026 20:31:26 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=164.75 that are outside of set tolerance 10 for current step target 175 and final target 175 [ControlledHeating.cs@205] 07/30/2026 20:31:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=179148, estimate=36.55311314846065 for layer 121, Z=12.101001 [PrintingService.cs@1524] 07/30/2026 20:31:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 74, island count 12 [PrintingService.cs@1569] 07/30/2026 20:31:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 122, start=0, count=408, Z=12.201 [PrintingService.cs@1518] 07/30/2026 20:31:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2946, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:31:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2073.8986142, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.80084932396257, Elapsed = 00:34:33.9411114, TimeTotal = 08:28:15.3251073, Remaining = 07:53:41.3839959, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:57.4062483, WeightTotalEstimate = 02:38:57.4062483, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:55.2826101, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:33.9411114, HeatingEstimate = 00:35:26.1013858, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:38.9045091, WeightEstimate = 02:38:57.4062483 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.80084932396257;StartedAtUtc;00:34:33.9411114;08:28:15.3251073;07:53:41.3839959;False;408;0;0;00:00:00;02:38:57.4062483;02:38:57.4062483;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:55.2826101;00:00:00;02:00:00;00:34:33.9411114;00:35:26.1013858;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:38.9045091 [PrintingService.cs@1918] 07/30/2026 20:31:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2074.8994531, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.804131277632261, Elapsed = 00:34:34.9419541, TimeTotal = 08:28:15.3251111, Remaining = 07:53:40.3831570, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:57.4062483, WeightTotalEstimate = 02:38:57.4062483, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:55.2826101, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:34.9419541, HeatingEstimate = 00:35:25.1005469, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:38.9045091, WeightEstimate = 02:38:57.4062483 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.804131277632261;StartedAtUtc;00:34:34.9419541;08:28:15.3251111;07:53:40.3831570;False;408;0;0;00:00:00;02:38:57.4062483;02:38:57.4062483;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:55.2826101;00:00:00;02:00:00;00:34:34.9419541;00:35:25.1005469;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:38.9045091 [PrintingService.cs@1918] 07/30/2026 20:31:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2075.8971555, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.807402954980408, Elapsed = 00:34:35.9396632, TimeTotal = 08:28:15.3251178, Remaining = 07:53:39.3854546, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:57.4062483, WeightTotalEstimate = 02:38:57.4062483, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:55.2826101, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:35.9396632, HeatingEstimate = 00:35:24.1028445, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:38.9045091, WeightEstimate = 02:38:57.4062483 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.807402954980408;StartedAtUtc;00:34:35.9396632;08:28:15.3251178;07:53:39.3854546;False;408;0;0;00:00:00;02:38:57.4062483;02:38:57.4062483;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:55.2826101;00:00:00;02:00:00;00:34:35.9396632;00:35:24.1028445;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:38.9045091 [PrintingService.cs@1918] 07/30/2026 20:31:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2076.8973808, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.810683543155557, Elapsed = 00:34:36.9401039, TimeTotal = 08:28:15.3253332, Remaining = 07:53:38.3852293, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:38:57.4062483, WeightTotalEstimate = 02:38:57.4062483, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:16:55.2826101, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:36.9401039, HeatingEstimate = 00:35:23.1026192, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:38.9045091, WeightEstimate = 02:38:57.4062483 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.810683543155557;StartedAtUtc;00:34:36.9401039;08:28:15.3253332;07:53:38.3852293;False;408;0;0;00:00:00;02:38:57.4062483;02:38:57.4062483;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:16:55.2826101;00:00:00;02:00:00;00:34:36.9401039;00:35:23.1026192;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:38.9045091 [PrintingService.cs@1918] 07/30/2026 20:31:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=142667, estimate=39.35583386953899 for layer 122, Z=12.201 [PrintingService.cs@1524] 07/30/2026 20:31:45 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 14 [PrintingService.cs@1569] 07/30/2026 20:31:45 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 123, start=0, count=408, Z=12.301001 [PrintingService.cs@1518] 07/30/2026 20:31:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2889, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:31:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2077.902736, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.812745060766562, Elapsed = 00:34:37.9452299, TimeTotal = 08:28:20.8511454, Remaining = 07:53:42.9059155, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:37.9452299, HeatingEstimate = 00:35:22.0972640, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.812745060766562;StartedAtUtc;00:34:37.9452299;08:28:20.8511454;07:53:42.9059155;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:37.9452299;00:35:22.0972640;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2078.9064493, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.816037703171188, Elapsed = 00:34:38.9495556, TimeTotal = 08:28:20.8517578, Remaining = 07:53:41.9022022, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:38.9495556, HeatingEstimate = 00:35:21.0935507, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.816037703171188;StartedAtUtc;00:34:38.9495556;08:28:20.8517578;07:53:41.9022022;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:38.9495556;00:35:21.0935507;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2079.9063291, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.819314603694081, Elapsed = 00:34:39.9490091, TimeTotal = 08:28:20.8513315, Remaining = 07:53:40.9023224, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:39.9490091, HeatingEstimate = 00:35:20.0936709, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.819314603694081;StartedAtUtc;00:34:39.9490091;08:28:20.8513315;07:53:40.9023224;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:39.9490091;00:35:20.0936709;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2080.9056983, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.822591141119563, Elapsed = 00:34:40.9483811, TimeTotal = 08:28:20.8513343, Remaining = 07:53:39.9029532, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:40.9483811, HeatingEstimate = 00:35:19.0943017, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.822591141119563;StartedAtUtc;00:34:40.9483811;08:28:20.8513343;07:53:39.9029532;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:40.9483811;00:35:19.0943017;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2081.9062542, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.8258710059496215, Elapsed = 00:34:41.9487554, TimeTotal = 08:28:20.8511527, Remaining = 07:53:38.9023973, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:41.9487554, HeatingEstimate = 00:35:18.0937458, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.8258710059496215;StartedAtUtc;00:34:41.9487554;08:28:20.8511527;07:53:38.9023973;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:41.9487554;00:35:18.0937458;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2082.9055691, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.829147413630101, Elapsed = 00:34:42.9480889, TimeTotal = 08:28:20.8511713, Remaining = 07:53:37.9030824, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:42.9480889, HeatingEstimate = 00:35:17.0944309, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.829147413630101;StartedAtUtc;00:34:42.9480889;08:28:20.8511713;07:53:37.9030824;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:42.9480889;00:35:17.0944309;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2083.9086571, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.8324360656264975, Elapsed = 00:34:43.9511542, TimeTotal = 08:28:20.8511486, Remaining = 07:53:36.8999944, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:43.9511542, HeatingEstimate = 00:35:16.0913429, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.8324360656264975;StartedAtUtc;00:34:43.9511542;08:28:20.8511486;07:53:36.8999944;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:43.9511542;00:35:16.0913429;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2084.9124512, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.835727132832132, Elapsed = 00:34:44.9549584, TimeTotal = 08:28:20.8511587, Remaining = 07:53:35.8962003, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:44.9549584, HeatingEstimate = 00:35:15.0875488, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.835727132832132;StartedAtUtc;00:34:44.9549584;08:28:20.8511587;07:53:35.8962003;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:44.9549584;00:35:15.0875488;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2085.9154359, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.839015468758074, Elapsed = 00:34:45.9579278, TimeTotal = 08:28:20.8511434, Remaining = 07:53:34.8932156, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:45.9579278, HeatingEstimate = 00:35:14.0845641, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.839015468758074;StartedAtUtc;00:34:45.9579278;08:28:20.8511434;07:53:34.8932156;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:45.9579278;00:35:14.0845641;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2086.9136104, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.842288102395426, Elapsed = 00:34:46.9561094, TimeTotal = 08:28:20.8511505, Remaining = 07:53:33.8950411, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:46.9561094, HeatingEstimate = 00:35:13.0863896, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.842288102395426;StartedAtUtc;00:34:46.9561094;08:28:20.8511505;07:53:33.8950411;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:46.9561094;00:35:13.0863896;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 175 with temperature 170 [HeaterCheck.cs@67] 07/30/2026 20:31:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2087.9131705, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.845565243121644, Elapsed = 00:34:47.9556649, TimeTotal = 08:28:20.8511459, Remaining = 07:53:32.8954810, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:47.9556649, HeatingEstimate = 00:35:12.0868295, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.845565243121644;StartedAtUtc;00:34:47.9556649;08:28:20.8511459;07:53:32.8954810;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:47.9556649;00:35:12.0868295;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:56 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 358 samples in 00:01:00.0085179 ~ 5.97 samples/sec, 5 resets, 11 ignored frames) [Mlx90640Camera.cs@313] 07/30/2026 20:31:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2088.9170332, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.8488565062215, Elapsed = 00:34:48.9595282, TimeTotal = 08:28:20.8511465, Remaining = 07:53:31.8916183, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:48.9595282, HeatingEstimate = 00:35:11.0829668, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.8488565062215;StartedAtUtc;00:34:48.9595282;08:28:20.8511465;07:53:31.8916183;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:48.9595282;00:35:11.0829668;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2089.9237205, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.852157522952701, Elapsed = 00:34:49.9663775, TimeTotal = 08:28:20.8513085, Remaining = 07:53:30.8849310, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:49.9663775, HeatingEstimate = 00:35:10.0762795, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:58 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.852157522952701;StartedAtUtc;00:34:49.9663775;08:28:20.8513085;07:53:30.8849310;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:49.9663775;00:35:10.0762795;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:31:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2090.9301564, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.855456860030594, Elapsed = 00:34:50.9726953, TimeTotal = 08:28:20.8511904, Remaining = 07:53:29.8784951, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:50.9726953, HeatingEstimate = 00:35:09.0698436, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:31:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.855456860030594;StartedAtUtc;00:34:50.9726953;08:28:20.8511904;07:53:29.8784951;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:50.9726953;00:35:09.0698436;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:32:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2091.9298274, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.858734230903061, Elapsed = 00:34:51.9723180, TimeTotal = 08:28:20.8511421, Remaining = 07:53:28.8788241, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:51.9723180, HeatingEstimate = 00:35:08.0701726, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.858734230903061;StartedAtUtc;00:34:51.9723180;08:28:20.8511421;07:53:28.8788241;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:51.9723180;00:35:08.0701726;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:32:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2092.929171, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.862012256416404, Elapsed = 00:34:52.9721792, TimeTotal = 08:28:20.8516597, Remaining = 07:53:27.8794805, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:52.9721792, HeatingEstimate = 00:35:07.0708290, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.862012256416404;StartedAtUtc;00:34:52.9721792;08:28:20.8516597;07:53:27.8794805;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:52.9721792;00:35:07.0708290;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:32:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2093.9298688, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.865292706071402, Elapsed = 00:34:53.9727345, TimeTotal = 08:28:20.8515172, Remaining = 07:53:26.8787827, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:53.9727345, HeatingEstimate = 00:35:06.0701312, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.865292706071402;StartedAtUtc;00:34:53.9727345;08:28:20.8515172;07:53:26.8787827;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:53.9727345;00:35:06.0701312;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:32:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2094.9294999, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.868568950087826, Elapsed = 00:34:54.9719911, TimeTotal = 08:28:20.8511427, Remaining = 07:53:25.8791516, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:54.9719911, HeatingEstimate = 00:35:05.0705001, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.868568950087826;StartedAtUtc;00:34:54.9719911;08:28:20.8511427;07:53:25.8791516;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:54.9719911;00:35:05.0705001;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:32:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2095.9404417, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.871884117939234, Elapsed = 00:34:55.9831612, TimeTotal = 08:28:20.8513710, Remaining = 07:53:24.8682098, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:55.9831612, HeatingEstimate = 00:35:04.0595583, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:04 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.871884117939234;StartedAtUtc;00:34:55.9831612;08:28:20.8513710;07:53:24.8682098;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:55.9831612;00:35:04.0595583;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:32:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2096.9436085, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.875172403311804, Elapsed = 00:34:56.9861006, TimeTotal = 08:28:20.8511436, Remaining = 07:53:23.8650430, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:02.9322897, WeightTotalEstimate = 02:39:02.9322897, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:00.8086515, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:56.9861006, HeatingEstimate = 00:35:03.0563915, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:44.4305505, WeightEstimate = 02:39:02.9322897 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.875172403311804;StartedAtUtc;00:34:56.9861006;08:28:20.8511436;07:53:23.8650430;False;408;0;0;00:00:00;02:39:02.9322897;02:39:02.9322897;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:00.8086515;00:00:00;02:00:00;00:34:56.9861006;00:35:03.0563915;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:44.4305505 [PrintingService.cs@1918] 07/30/2026 20:32:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=184359, estimate=37.57990306392286 for layer 123, Z=12.301001 [PrintingService.cs@1524] 07/30/2026 20:32:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 1, island count 14 [PrintingService.cs@1569] 07/30/2026 20:32:06 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 124, start=0, count=408, Z=12.401001 [PrintingService.cs@1518] 07/30/2026 20:32:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2097.9411271, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.876696736646716, Elapsed = 00:34:57.9836940, TimeTotal = 08:28:28.5969957, Remaining = 07:53:30.6133017, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:57.9836940, HeatingEstimate = 00:35:02.0588729, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.876696736646716;StartedAtUtc;00:34:57.9836940;08:28:28.5969957;07:53:30.6133017;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:34:57.9836940;00:35:02.0588729;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2991, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:32:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2098.9415425, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.879976283761431, Elapsed = 00:34:58.9842473, TimeTotal = 08:28:28.5971336, Remaining = 07:53:29.6128863, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:58.9842473, HeatingEstimate = 00:35:01.0584575, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.879976283761431;StartedAtUtc;00:34:58.9842473;08:28:28.5971336;07:53:29.6128863;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:34:58.9842473;00:35:01.0584575;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2099.9407703, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.883250873278887, Elapsed = 00:34:59.9832641, TimeTotal = 08:28:28.5969226, Remaining = 07:53:28.6136585, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:34:59.9832641, HeatingEstimate = 00:35:00.0592297, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.883250873278887;StartedAtUtc;00:34:59.9832641;08:28:28.5969226;07:53:28.6136585;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:34:59.9832641;00:35:00.0592297;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 77.916664 with temperature 68.25 [HeaterCheck.cs@111] 07/30/2026 20:32:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2100.9416733, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.88653168685308, Elapsed = 00:35:00.9841963, TimeTotal = 08:28:28.5969518, Remaining = 07:53:27.6127555, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:00.9841963, HeatingEstimate = 00:34:59.0583267, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.88653168685308;StartedAtUtc;00:35:00.9841963;08:28:28.5969518;07:53:27.6127555;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:00.9841963;00:34:59.0583267;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2101.947164, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.889830777752986, Elapsed = 00:35:01.9907778, TimeTotal = 08:28:28.5980426, Remaining = 07:53:26.6072648, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:01.9907778, HeatingEstimate = 00:34:58.0528360, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.889830777752986;StartedAtUtc;00:35:01.9907778;08:28:28.5980426;07:53:26.6072648;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:01.9907778;00:34:58.0528360;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2102.9505914, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.8931172517016055, Elapsed = 00:35:02.9933779, TimeTotal = 08:28:28.5972153, Remaining = 07:53:25.6038374, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:02.9933779, HeatingEstimate = 00:34:57.0494086, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.8931172517016055;StartedAtUtc;00:35:02.9933779;08:28:28.5972153;07:53:25.6038374;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:02.9933779;00:34:57.0494086;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2103.9504087, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.8963939871636155, Elapsed = 00:35:03.9930542, TimeTotal = 08:28:28.5970743, Remaining = 07:53:24.6040201, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:03.9930542, HeatingEstimate = 00:34:56.0495913, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.8963939871636155;StartedAtUtc;00:35:03.9930542;08:28:28.5970743;07:53:24.6040201;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:03.9930542;00:34:56.0495913;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2104.9505645, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.899671875206938, Elapsed = 00:35:04.9930831, TimeTotal = 08:28:28.5969474, Remaining = 07:53:23.6038643, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:04.9930831, HeatingEstimate = 00:34:55.0494355, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.899671875206938;StartedAtUtc;00:35:04.9930831;08:28:28.5969474;07:53:23.6038643;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:04.9930831;00:34:55.0494355;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2105.951123, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.90295145521146, Elapsed = 00:35:05.9936366, TimeTotal = 08:28:28.5969424, Remaining = 07:53:22.6033058, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:05.9936366, HeatingEstimate = 00:34:54.0488770, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.90295145521146;StartedAtUtc;00:35:05.9936366;08:28:28.5969424;07:53:22.6033058;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:05.9936366;00:34:54.0488770;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2106.9496861, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.9062250247927945, Elapsed = 00:35:06.9923684, TimeTotal = 08:28:28.5971111, Remaining = 07:53:21.6047427, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:06.9923684, HeatingEstimate = 00:34:53.0503139, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.9062250247927945;StartedAtUtc;00:35:06.9923684;08:28:28.5971111;07:53:21.6047427;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:06.9923684;00:34:53.0503139;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2107.9498891, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.909503552738236, Elapsed = 00:35:07.9926035, TimeTotal = 08:28:28.5971432, Remaining = 07:53:20.6045397, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:07.9926035, HeatingEstimate = 00:34:52.0501109, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:16 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.909503552738236;StartedAtUtc;00:35:07.9926035;08:28:28.5971432;07:53:20.6045397;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:07.9926035;00:34:52.0501109;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2108.9497365, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.912780138883506, Elapsed = 00:35:08.9922286, TimeTotal = 08:28:28.5969209, Remaining = 07:53:19.6046923, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:08.9922286, HeatingEstimate = 00:34:51.0502635, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.912780138883506;StartedAtUtc;00:35:08.9922286;08:28:28.5969209;07:53:19.6046923;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:08.9922286;00:34:51.0502635;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2109.9497518, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.916057949395138, Elapsed = 00:35:09.9922425, TimeTotal = 08:28:28.5969195, Remaining = 07:53:18.6046770, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:09.9922425, HeatingEstimate = 00:34:50.0502482, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.916057949395138;StartedAtUtc;00:35:09.9922425;08:28:28.5969195;07:53:18.6046770;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:09.9922425;00:34:50.0502482;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2110.9498402, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.919336129177682, Elapsed = 00:35:10.9923720, TimeTotal = 08:28:28.5969606, Remaining = 07:53:17.6045886, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:10.9923720, HeatingEstimate = 00:34:49.0501598, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.919336129177682;StartedAtUtc;00:35:10.9923720;08:28:28.5969606;07:53:17.6045886;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:10.9923720;00:34:49.0501598;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2111.9489685, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.922610919121301, Elapsed = 00:35:11.9914618, TimeTotal = 08:28:28.5969221, Remaining = 07:53:16.6054603, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:11.9914618, HeatingEstimate = 00:34:48.0510315, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.922610919121301;StartedAtUtc;00:35:11.9914618;08:28:28.5969221;07:53:16.6054603;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:11.9914618;00:34:48.0510315;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2112.949088, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.92588961359973, Elapsed = 00:35:12.9917577, TimeTotal = 08:28:28.5970985, Remaining = 07:53:15.6053408, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:12.9917577, HeatingEstimate = 00:34:47.0509120, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.92588961359973;StartedAtUtc;00:35:12.9917577;08:28:28.5970985;07:53:15.6053408;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:12.9917577;00:34:47.0509120;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2113.9522805, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.929177640219919, Elapsed = 00:35:13.9948839, TimeTotal = 08:28:28.5970322, Remaining = 07:53:14.6021483, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:13.9948839, HeatingEstimate = 00:34:46.0477195, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.929177640219919;StartedAtUtc;00:35:13.9948839;08:28:28.5970322;07:53:14.6021483;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:13.9948839;00:34:46.0477195;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2114.9554821, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.932466080134268, Elapsed = 00:35:14.9981449, TimeTotal = 08:28:28.5970916, Remaining = 07:53:13.5989467, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:14.9981449, HeatingEstimate = 00:34:45.0445179, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.932466080134268;StartedAtUtc;00:35:14.9981449;08:28:28.5970916;07:53:13.5989467;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:14.9981449;00:34:45.0445179;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2115.9569337, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.935748089975581, Elapsed = 00:35:15.9994284, TimeTotal = 08:28:28.5969235, Remaining = 07:53:12.5974951, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:10.6780670, WeightTotalEstimate = 02:39:10.6780670, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:08.5544288, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:15.9994284, HeatingEstimate = 00:34:44.0430663, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:52.1763278, WeightEstimate = 02:39:10.6780670 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:36. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.935748089975581;StartedAtUtc;00:35:15.9994284;08:28:28.5969235;07:53:12.5974951;False;408;0;0;00:00:00;02:39:10.6780670;02:39:10.6780670;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:08.5544288;00:00:00;02:00:00;00:35:15.9994284;00:34:44.0430663;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:52.1763278 [PrintingService.cs@1918] 07/30/2026 20:32:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=146103, estimate=39.854056000187974 for layer 124, Z=12.401001 [PrintingService.cs@1524] 07/30/2026 20:32:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 2, island count 14 [PrintingService.cs@1569] 07/30/2026 20:32:25 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 125, start=0, count=408, Z=12.501 [PrintingService.cs@1518] 07/30/2026 20:32:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2116.9596566, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.937559363448517, Elapsed = 00:35:17.0021631, TimeTotal = 08:28:35.0853808, Remaining = 07:53:18.0832177, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:17.0021631, HeatingEstimate = 00:34:43.0403434, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.937559363448517;StartedAtUtc;00:35:17.0021631;08:28:35.0853808;07:53:18.0832177;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:17.0021631;00:34:43.0403434;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918] 07/30/2026 20:32:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2918, instances=16 (object-per-object) [PrintingService.cs@263] 07/30/2026 20:32:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2117.9586851, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.940833205065898, Elapsed = 00:35:18.0011777, TimeTotal = 08:28:35.0853669, Remaining = 07:53:17.0841892, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:18.0011777, HeatingEstimate = 00:34:42.0413149, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.940833205065898;StartedAtUtc;00:35:18.0011777;08:28:35.0853669;07:53:17.0841892;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:18.0011777;00:34:42.0413149;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918] 07/30/2026 20:32:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2118.9588287, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.944111378544321, Elapsed = 00:35:19.0015296, TimeTotal = 08:28:35.0855752, Remaining = 07:53:16.0840456, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:19.0015296, HeatingEstimate = 00:34:41.0411713, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.944111378544321;StartedAtUtc;00:35:19.0015296;08:28:35.0855752;07:53:16.0840456;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:19.0015296;00:34:41.0411713;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918] 07/30/2026 20:32:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=78.91666666666666,powderChamber1=78.91666666666666,powderChamber2=78.91666666666666,powderChamber3=78.91666666666666,powderChamber4=78.91666666666666 [ControlledHeating.cs@169] 07/30/2026 20:32:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 175 with temperature 172 [HeaterCheck.cs@67] 07/30/2026 20:32:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2119.9569136, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.947381596392843, Elapsed = 00:35:19.9994263, TimeTotal = 08:28:35.0853870, Remaining = 07:53:15.0859607, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:19.9994263, HeatingEstimate = 00:34:40.0430864, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.947381596392843;StartedAtUtc;00:35:19.9994263;08:28:35.0853870;07:53:15.0859607;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:19.9994263;00:34:40.0430864;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918] 07/30/2026 20:32:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 78.916664 with temperature 74.25 [HeaterCheck.cs@67] 07/30/2026 20:32:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2120.9575424, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.950660665839275, Elapsed = 00:35:21.0000358, TimeTotal = 08:28:35.0853677, Remaining = 07:53:14.0853319, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:21.0000358, HeatingEstimate = 00:34:39.0424576, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.950660665839275;StartedAtUtc;00:35:21.0000358;08:28:35.0853677;07:53:14.0853319;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:21.0000358;00:34:39.0424576;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918] 07/30/2026 20:32:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2121.9592329, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.953943269132974, Elapsed = 00:35:22.0017249, TimeTotal = 08:28:35.0853663, Remaining = 07:53:13.0836414, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:22.0017249, HeatingEstimate = 00:34:38.0407671, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.953943269132974;StartedAtUtc;00:35:22.0017249;08:28:35.0853663;07:53:13.0836414;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:22.0017249;00:34:38.0407671;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918] 07/30/2026 20:32:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2122.9582946, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.957218258072942, Elapsed = 00:35:23.0011133, TimeTotal = 08:28:35.0856930, Remaining = 07:53:12.0845797, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:23.0011133, HeatingEstimate = 00:34:37.0417054, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.957218258072942;StartedAtUtc;00:35:23.0011133;08:28:35.0856930;07:53:12.0845797;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:23.0011133;00:34:37.0417054;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918] 07/30/2026 20:32:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2123.9569888, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.960490054998429, Elapsed = 00:35:23.9994823, TimeTotal = 08:28:35.0853678, Remaining = 07:53:11.0858855, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:23.9994823, HeatingEstimate = 00:34:36.0430112, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:32 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.960490054998429;StartedAtUtc;00:35:23.9994823;08:28:35.0853678;07:53:11.0858855;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:23.9994823;00:34:36.0430112;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918] 07/30/2026 20:32:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2124.9652067, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.963797469234531, Elapsed = 00:35:25.0088206, TimeTotal = 08:28:35.0864882, Remaining = 07:53:10.0776676, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:25.0088206, HeatingEstimate = 00:34:35.0347933, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.963797469234531;StartedAtUtc;00:35:25.0088206;08:28:35.0864882;07:53:10.0776676;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:25.0088206;00:34:35.0347933;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918] 07/30/2026 20:32:33 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (398 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/30/2026 20:32:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2125.9679677, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.967080191821679, Elapsed = 00:35:26.0104687, TimeTotal = 08:28:35.0853753, Remaining = 07:53:09.0749066, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:26.0104687, HeatingEstimate = 00:34:34.0320323, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.967080191821679;StartedAtUtc;00:35:26.0104687;08:28:35.0853753;07:53:09.0749066;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:26.0104687;00:34:34.0320323;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918] 07/30/2026 20:32:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderBed=67.96428680419922,powderChamber4=68.25 that are outside of set tolerance 10 for current step target 78.91666666666666 and final target 145 [ControlledHeating.cs@205] 07/30/2026 20:32:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2126.9697581, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.970363095361441, Elapsed = 00:35:27.0122488, TimeTotal = 08:28:35.0853650, Remaining = 07:53:08.0731162, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:27.0122488, HeatingEstimate = 00:34:33.0302419, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.970363095361441;StartedAtUtc;00:35:27.0122488;08:28:35.0853650;07:53:08.0731162;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:27.0122488;00:34:33.0302419;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918] 07/30/2026 20:32:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 2127.9692152, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 30/07/2026 18:57:06, Progress = 6.973638822300924, Elapsed = 00:35:28.0118497, TimeTotal = 08:28:35.0855088, Remaining = 07:53:07.0736591, Incomplete = False, SoftCount = 408, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 02:39:17.1665125, WeightTotalEstimate = 02:39:17.1665125, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:14.4546526, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0285071, TimeLayers = 05:17:15.0428743, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:35:28.0118497, HeatingEstimate = 00:34:32.0307848, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:01:20, CoolingFrom = 180, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:37:49.1048380, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:01:27.2732630, JobElapsed = 00:00:00, JobTotal = 04:37:58.6647733, WeightEstimate = 02:39:17.1665125 }, JobName = D790 and Benchy and Rocket Trophy PA11 Onyx 2026-07-30 }. UTC calculatedEstimate: 07/31/2026 03:25:43. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/30/2026 20:32:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.973638822300924;StartedAtUtc;00:35:28.0118497;08:28:35.0855088;07:53:07.0736591;False;408;0;0;00:00:00;02:39:17.1665125;02:39:17.1665125;00:00:00;00:00:00;00:00:00;00:00:14.4546526;00:00:00;00:00:00.0285071;05:17:15.0428743;00:00:00;02:00:00;00:35:28.0118497;00:34:32.0307848;00:00:00;00:01:20;180;00:00:00;00:37:49.1048380;00:00:00;00:01:27.2732630;00:00:00;04:37:58.6647733 [PrintingService.cs@1918]