07/18/2026 19:38:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0673146 ~ 6.08 samples/sec, 16 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:39:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0707970 ~ 6.08 samples/sec, 16 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:40:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0607703 ~ 6.08 samples/sec, 16 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:41:16 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0631431 ~ 6.01 samples/sec, 16 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:42:00 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 19:42:00 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 19:43:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0680704 ~ 6.08 samples/sec, 17 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:44:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0734065 ~ 6.08 samples/sec, 17 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:45:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0683656 ~ 6.08 samples/sec, 17 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:46:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0591792 ~ 6.03 samples/sec, 17 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:46:19 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 19:46:19 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 19:46:43 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] 07/18/2026 19:47:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0803649 ~ 6.08 samples/sec, 18 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:47:34 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 07/18/2026 19:48:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0693403 ~ 6.08 samples/sec, 18 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:49:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0610701 ~ 6.08 samples/sec, 18 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:50:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 363 samples in 00:01:00.0545567 ~ 6.04 samples/sec, 18 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:51:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0629299 ~ 6.08 samples/sec, 18 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:52:03 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 19:52:03 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 19:53:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0465381 ~ 6.08 samples/sec, 19 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:54:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0616816 ~ 6.08 samples/sec, 19 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:55:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0566063 ~ 6.08 samples/sec, 19 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:56:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0680903 ~ 6.08 samples/sec, 19 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:57:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0734340 ~ 6.08 samples/sec, 19 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:58:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0562639 ~ 6.08 samples/sec, 19 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 19:59:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0576328 ~ 6.08 samples/sec, 19 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:00:03 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0597480 ~ 6.06 samples/sec, 19 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:01:01 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 20:01:01 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 20:02:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0786138 ~ 6.08 samples/sec, 20 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:03:01 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0676735 ~ 6.08 samples/sec, 20 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:04:02 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0598305 ~ 6.08 samples/sec, 20 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:05:02 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0724961 ~ 6.08 samples/sec, 20 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:06:02 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0594481 ~ 6.08 samples/sec, 20 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:06:16 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 20:06:17 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 20:07:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0660440 ~ 6.01 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:08:17 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0717297 ~ 6.08 samples/sec, 21 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:08:31 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 20:08:31 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 20:09:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0571781 ~ 6.08 samples/sec, 22 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:10:31 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0735002 ~ 6.08 samples/sec, 22 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:10:59 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 20:10:59 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 20:11:59 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0595427 ~ 6.01 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:12:59 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0788220 ~ 6.08 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:13:59 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0628322 ~ 6.08 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:14:59 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0767980 ~ 6.08 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:16:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0758181 ~ 6.08 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:17:00 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0666981 ~ 6.08 samples/sec, 23 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:17:38 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 20:17:39 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 20:17:41 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 20:17:41 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 20:18:12 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 20:18:12 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 20:19:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0566937 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:20:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0588712 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:21:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0715125 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:22:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0652969 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:23:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0664087 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:24:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0738860 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:25:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0664451 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:26:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0741660 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:27:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0590250 ~ 6.06 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:28:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0720416 ~ 6.03 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:29:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0879484 ~ 6.07 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:30:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0659389 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:31:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0704975 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:32:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0532253 ~ 6.08 samples/sec, 26 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:32:19 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 20:32:19 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 20:33:19 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0658595 ~ 6.08 samples/sec, 27 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:34:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0686455 ~ 6.08 samples/sec, 27 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:35:19 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 20:35:19 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 20:36:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0653894 ~ 6.08 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:37:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0618895 ~ 6.08 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:38:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0739489 ~ 6.06 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:39:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0643493 ~ 6.08 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:40:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0659842 ~ 6.08 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:41:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0554034 ~ 6.08 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:42:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0634700 ~ 6.08 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:43:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0612330 ~ 6.03 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:44:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0632264 ~ 6.08 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:45:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0644079 ~ 6.08 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:46:20 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0665676 ~ 6.03 samples/sec, 28 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:46:44 INFO [SLS4All.Compact.ComponentModel.AppHandleEventGlobal] [0] Periodically reloading the page (SLS4All.Compact.ComponentModel.AppHandleEventGlobal) [AppHandleEventGlobal.cs@91] 07/18/2026 20:47:09 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 20:47:09 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 20:47:34 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 07/18/2026 20:48:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1273144 ~ 6.02 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:49:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0609993 ~ 6.08 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:50:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0672335 ~ 6.01 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:51:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0653013 ~ 6.08 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:52:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0608026 ~ 6.08 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:53:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0658177 ~ 6.08 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:54:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0620947 ~ 6.03 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:55:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0553360 ~ 6.08 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:56:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0586828 ~ 6.08 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:57:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0693627 ~ 6.08 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:58:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0679829 ~ 6.08 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:59:09 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0657615 ~ 6.08 samples/sec, 29 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 20:59:38 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 20:59:38 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:00:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0592722 ~ 6.08 samples/sec, 30 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:01:27 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:01:27 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:01:46 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:01:46 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:01:56 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Stopping generator [LazyDataGenerator.cs@93] 07/18/2026 21:01:57 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/18/2026 21:01:57 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 21:01:57 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 21:02:32 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:02:32 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:03:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0730638 ~ 6.08 samples/sec, 33 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:04:32 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0550145 ~ 6.08 samples/sec, 33 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:05:08 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] 07/18/2026 21:05:08 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] 07/18/2026 21:05:08 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] 07/18/2026 21:05:08 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 07/18/2026 20:05:08 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] 07/18/2026 21:05:09 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:05:09 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] 07/18/2026 21:05:09 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] 07/18/2026 21:05:09 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] 07/18/2026 21:05:09 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] 07/18/2026 21:05:09 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] 07/18/2026 21:05:09 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] 07/18/2026 21:05:09 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] 07/18/2026 21:05:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:05:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:05:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:05:09 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=01e4f0ec-e022-49fe-90de-e8f721fec625) 07/18/2026 21:05:09 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] 07/18/2026 21:05:09 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... Waiting for exit signal... Successfully set permissions. 07/18/2026 21:05:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:05:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:05:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:05:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:05:09 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] 07/18/2026 21:05:09 INFO [Inova.ApiPlugin.FullRecoatLayerClient] [0] FullRecoatLayerClient installed as ILayerClient (full-recoat expansion available) 07/18/2026 21:05:09 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:05:09 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] 07/18/2026 21:05:09 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ 07/18/2026 21:05:10 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:05:10 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:05:10 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] 07/18/2026 21:05:10 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] 07/18/2026 21:05:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] 07/18/2026 21:05:11 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 07/18/2026 21:05:11 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. 07/18/2026 21:05:11 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 07/18/2026 21:05:11 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current 07/18/2026 21:05:11 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] 07/18/2026 21:05:11 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: /home/ppak/SLS4All/Current/appsettings.toml /home/ppak/SLS4All/Current/appsettings.Inova.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml /home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] 07/18/2026 21:05:13 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 21:05:13 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 21:05:14 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/288777c1-8f44-4f2f-993e-1559682b127d.sh [SystemPrinterHostname.cs@140] 07/18/2026 21:05:14 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] 07/18/2026 21:05:16 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNN50VFUMKN8, RemoteIpAddress = 127.0.0.1, RemotePort = 42778, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0JEwpeOLPa8OTTlBzaOlolVtYOJZeO5D9wE5AVZW2A_qo0VfSUBpCG4Xd-zhzoK0V6_j4tp9w0sQ4SujO79pw3lDh1zsT8rnP7fi9CwJef8nSSp-JeaC9bjrLlc7qiji8N8LJOnER0ES3KcL17W-mHkMZfLqHITYjYHFVPuFyih2qFIk8xft9AgAWh88_M9krZXjuZq1ODsMGs9FAjV3wfvNV2ucc700L-C4bXMAsfdvcMNPV_neuXUDv_-UBHpfBrUMklz1NaCPjCw1n59I7DFvTLYQ-myV2moEnn4xNYwM26bsg1v1QIFWISMkzA5b_OjT5Iu2NYJgNtrrEgNkGV-mWeaeoV2egik-3Olq8IhygsMLmZYcRJaX64cPliVlrau0cx9EFkKqKmUF5Ij_Msf7BNmafysDnxFHlkv4vAB3LivlsCsxo3fmAVj9UrGdYBDLHErWdGwstQjmVx62cd0-BsqM_0TiWeSUkBjfbdh1wt-6n6H7jG__QMJHTebkU]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0JEwpeOLPa8OTTlBzaOlolVtYOJZeO5D9wE5AVZW2A_qo0VfSUBpCG4Xd-zhzoK0V6_j4tp9w0sQ4SujO79pw3lDh1zsT8rnP7fi9CwJef8nSSp-JeaC9bjrLlc7qiji8N8LJOnER0ES3KcL17W-mHkMZfLqHITYjYHFVPuFyih2qFIk8xft9AgAWh88_M9krZXjuZq1ODsMGs9FAjV3wfvNV2ucc700L-C4bXMAsfdvcMNPV_neuXUDv_-UBHpfBrUMklz1NaCPjCw1n59I7DFvTLYQ-myV2moEnn4xNYwM26bsg1v1QIFWISMkzA5b_OjT5Iu2NYJgNtrrEgNkGV-mWeaeoV2egik-3Olq8IhygsMLmZYcRJaX64cPliVlrau0cx9EFkKqKmUF5Ij_Msf7BNmafysDnxFHlkv4vAB3LivlsCsxo3fmAVj9UrGdYBDLHErWdGwstQjmVx62cd0-BsqM_0TiWeSUkBjfbdh1wt-6n6H7jG__QMJHTebkU]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] 07/18/2026 21:05:16 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNN50VFUMKN8, RemoteIpAddress = 127.0.0.1, RemotePort = 42778, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0JEwpeOLPa8OTTlBzaOlolVtYOJZeO5D9wE5AVZW2A_qo0VfSUBpCG4Xd-zhzoK0V6_j4tp9w0sQ4SujO79pw3lDh1zsT8rnP7fi9CwJef8nSSp-JeaC9bjrLlc7qiji8N8LJOnER0ES3KcL17W-mHkMZfLqHITYjYHFVPuFyih2qFIk8xft9AgAWh88_M9krZXjuZq1ODsMGs9FAjV3wfvNV2ucc700L-C4bXMAsfdvcMNPV_neuXUDv_-UBHpfBrUMklz1NaCPjCw1n59I7DFvTLYQ-myV2moEnn4xNYwM26bsg1v1QIFWISMkzA5b_OjT5Iu2NYJgNtrrEgNkGV-mWeaeoV2egik-3Olq8IhygsMLmZYcRJaX64cPliVlrau0cx9EFkKqKmUF5Ij_Msf7BNmafysDnxFHlkv4vAB3LivlsCsxo3fmAVj9UrGdYBDLHErWdGwstQjmVx62cd0-BsqM_0TiWeSUkBjfbdh1wt-6n6H7jG__QMJHTebkU]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0JEwpeOLPa8OTTlBzaOlolVtYOJZeO5D9wE5AVZW2A_qo0VfSUBpCG4Xd-zhzoK0V6_j4tp9w0sQ4SujO79pw3lDh1zsT8rnP7fi9CwJef8nSSp-JeaC9bjrLlc7qiji8N8LJOnER0ES3KcL17W-mHkMZfLqHITYjYHFVPuFyih2qFIk8xft9AgAWh88_M9krZXjuZq1ODsMGs9FAjV3wfvNV2ucc700L-C4bXMAsfdvcMNPV_neuXUDv_-UBHpfBrUMklz1NaCPjCw1n59I7DFvTLYQ-myV2moEnn4xNYwM26bsg1v1QIFWISMkzA5b_OjT5Iu2NYJgNtrrEgNkGV-mWeaeoV2egik-3Olq8IhygsMLmZYcRJaX64cPliVlrau0cx9EFkKqKmUF5Ij_Msf7BNmafysDnxFHlkv4vAB3LivlsCsxo3fmAVj9UrGdYBDLHErWdGwstQjmVx62cd0-BsqM_0TiWeSUkBjfbdh1wt-6n6H7jG__QMJHTebkU]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] 07/18/2026 21:05:16 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNN50VFUMKN8, RemoteIpAddress = 127.0.0.1, RemotePort = 42778, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0JEwpeOLPa8OTTlBzaOlolVtYOJZeO5D9wE5AVZW2A_qo0VfSUBpCG4Xd-zhzoK0V6_j4tp9w0sQ4SujO79pw3lDh1zsT8rnP7fi9CwJef8nSSp-JeaC9bjrLlc7qiji8N8LJOnER0ES3KcL17W-mHkMZfLqHITYjYHFVPuFyih2qFIk8xft9AgAWh88_M9krZXjuZq1ODsMGs9FAjV3wfvNV2ucc700L-C4bXMAsfdvcMNPV_neuXUDv_-UBHpfBrUMklz1NaCPjCw1n59I7DFvTLYQ-myV2moEnn4xNYwM26bsg1v1QIFWISMkzA5b_OjT5Iu2NYJgNtrrEgNkGV-mWeaeoV2egik-3Olq8IhygsMLmZYcRJaX64cPliVlrau0cx9EFkKqKmUF5Ij_Msf7BNmafysDnxFHlkv4vAB3LivlsCsxo3fmAVj9UrGdYBDLHErWdGwstQjmVx62cd0-BsqM_0TiWeSUkBjfbdh1wt-6n6H7jG__QMJHTebkU]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0JEwpeOLPa8OTTlBzaOlolVtYOJZeO5D9wE5AVZW2A_qo0VfSUBpCG4Xd-zhzoK0V6_j4tp9w0sQ4SujO79pw3lDh1zsT8rnP7fi9CwJef8nSSp-JeaC9bjrLlc7qiji8N8LJOnER0ES3KcL17W-mHkMZfLqHITYjYHFVPuFyih2qFIk8xft9AgAWh88_M9krZXjuZq1ODsMGs9FAjV3wfvNV2ucc700L-C4bXMAsfdvcMNPV_neuXUDv_-UBHpfBrUMklz1NaCPjCw1n59I7DFvTLYQ-myV2moEnn4xNYwM26bsg1v1QIFWISMkzA5b_OjT5Iu2NYJgNtrrEgNkGV-mWeaeoV2egik-3Olq8IhygsMLmZYcRJaX64cPliVlrau0cx9EFkKqKmUF5Ij_Msf7BNmafysDnxFHlkv4vAB3LivlsCsxo3fmAVj9UrGdYBDLHErWdGwstQjmVx62cd0-BsqM_0TiWeSUkBjfbdh1wt-6n6H7jG__QMJHTebkU]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] 07/18/2026 21:05:16 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] 07/18/2026 21:05:16 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:05:16 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:05:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] 07/18/2026 21:05:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:05:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] 07/18/2026 21:05:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:05:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:05:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:05:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] 07/18/2026 21:05:17 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] 07/18/2026 21:05:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] 07/18/2026 21:05:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:05:18 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] 07/18/2026 21:05:18 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] 07/18/2026 21:05:18 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! 07/18/2026 21:05:18 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3687903. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=303, gen1=108, gen2=10, LatencyMode=Interactive, FreeMemory=6466502656, Live=277118768, HeapSizeBytes=282122328, FragmentedBytes=6635744, TotalCommittedBytes=315899904, PinnedObjectsCount=24, MemoryLoadBytes=2112651264, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:05:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629989. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0846917. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 21:05:18 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:05:18 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] 07/18/2026 21:05:19 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] 07/18/2026 21:05:20 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] 07/18/2026 21:05:26 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] 07/18/2026 21:06:42 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 07/18/2026 21:06:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1331353 ~ 6 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:07:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0765150 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:08:43 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0636543 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:09:10 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:09:10 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:10:10 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0643321 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:11:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0533140 ~ 6.06 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:12:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0803145 ~ 6.03 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:13:11 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0631792 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:13:27 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:13:28 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:14:31 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] 07/18/2026 21:14:31 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] 07/18/2026 21:14:31 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] 07/18/2026 21:14:31 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 07/18/2026 20:14:31 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] 07/18/2026 21:14:32 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:14:32 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] 07/18/2026 21:14:32 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] 07/18/2026 21:14:32 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] 07/18/2026 21:14:32 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] 07/18/2026 21:14:32 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] 07/18/2026 21:14:32 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] 07/18/2026 21:14:32 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] 07/18/2026 21:14:32 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:14:32 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:14:32 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:14:32 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=ca5f6337-ef2a-47e9-86e1-a9b14a9c06de) 07/18/2026 21:14:32 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... Waiting for exit signal... Successfully set permissions. 07/18/2026 21:14:32 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] 07/18/2026 21:14:32 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:14:32 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:14:32 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:14:32 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:14:32 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] 07/18/2026 21:14:32 INFO [Inova.ApiPlugin.FullRecoatLayerClient] [0] FullRecoatLayerClient installed as ILayerClient (full-recoat expansion available) 07/18/2026 21:14:32 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:14:32 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ 07/18/2026 21:14:33 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] 07/18/2026 21:14:33 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:14:33 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:14:33 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] 07/18/2026 21:14:33 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] 07/18/2026 21:14:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] 07/18/2026 21:14:34 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 07/18/2026 21:14:34 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. 07/18/2026 21:14:34 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 07/18/2026 21:14:34 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current 07/18/2026 21:14:34 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] 07/18/2026 21:14:34 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: /home/ppak/SLS4All/Current/appsettings.toml /home/ppak/SLS4All/Current/appsettings.Inova.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml /home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] 07/18/2026 21:14:37 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/9970c17f-8234-499a-9246-502752c9a074.sh [SystemPrinterHostname.cs@140] 07/18/2026 21:14:37 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] 07/18/2026 21:14:39 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNN514NJ15O5, RemoteIpAddress = 127.0.0.1, RemotePort = 39764, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1ZuMbV0rYRxnkQvA1jeqtcIT1-fywmDnbRJMOXglixCwjCkE3h_QkLWCOM6WyHBJLjKlsNDlWQSAE5c1SplKOjj3AEXnuJQ1jYazYgsolvj36LIGV6ms7iBwNFD_2gE7LT2HksWrF50SZTLOi8H52QwF8RsEq_AI_boZsMhe-OOW_lOcahEGOE2ue0rpOLye51oRU2g4Mgn0NkmGlLPxDops0NCF_sGanQFsjISt413dJyGQf_bXrVMTJ2hy_ciHiZ9hRQt14qyQTQ1YxMlLKw4C6UKpRs4nl0sJVsOj__a2ZaXj2DdSJSrdJrlgLngvRhoXP9p1sOIMBSkBeG4Ph4w7MOKPDEzymeadeZ0DbaO0WuqkZwXXqomXt7d3XrLtcEjZJICkJoXLRmw3sS1dH59qNHK26WtmXPRzMaQ5A36poAj1E66_Ra1oQJDxiOskm6ee1PkRP0Z3uO-2KsNgPxtyuh9O2IqoBVBu-DXXcOAyK5JOfpzgbvpWXNSd1Ty9A]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1ZuMbV0rYRxnkQvA1jeqtcIT1-fywmDnbRJMOXglixCwjCkE3h_QkLWCOM6WyHBJLjKlsNDlWQSAE5c1SplKOjj3AEXnuJQ1jYazYgsolvj36LIGV6ms7iBwNFD_2gE7LT2HksWrF50SZTLOi8H52QwF8RsEq_AI_boZsMhe-OOW_lOcahEGOE2ue0rpOLye51oRU2g4Mgn0NkmGlLPxDops0NCF_sGanQFsjISt413dJyGQf_bXrVMTJ2hy_ciHiZ9hRQt14qyQTQ1YxMlLKw4C6UKpRs4nl0sJVsOj__a2ZaXj2DdSJSrdJrlgLngvRhoXP9p1sOIMBSkBeG4Ph4w7MOKPDEzymeadeZ0DbaO0WuqkZwXXqomXt7d3XrLtcEjZJICkJoXLRmw3sS1dH59qNHK26WtmXPRzMaQ5A36poAj1E66_Ra1oQJDxiOskm6ee1PkRP0Z3uO-2KsNgPxtyuh9O2IqoBVBu-DXXcOAyK5JOfpzgbvpWXNSd1Ty9A]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] 07/18/2026 21:14:39 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNN514NJ15O5, RemoteIpAddress = 127.0.0.1, RemotePort = 39764, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1ZuMbV0rYRxnkQvA1jeqtcIT1-fywmDnbRJMOXglixCwjCkE3h_QkLWCOM6WyHBJLjKlsNDlWQSAE5c1SplKOjj3AEXnuJQ1jYazYgsolvj36LIGV6ms7iBwNFD_2gE7LT2HksWrF50SZTLOi8H52QwF8RsEq_AI_boZsMhe-OOW_lOcahEGOE2ue0rpOLye51oRU2g4Mgn0NkmGlLPxDops0NCF_sGanQFsjISt413dJyGQf_bXrVMTJ2hy_ciHiZ9hRQt14qyQTQ1YxMlLKw4C6UKpRs4nl0sJVsOj__a2ZaXj2DdSJSrdJrlgLngvRhoXP9p1sOIMBSkBeG4Ph4w7MOKPDEzymeadeZ0DbaO0WuqkZwXXqomXt7d3XrLtcEjZJICkJoXLRmw3sS1dH59qNHK26WtmXPRzMaQ5A36poAj1E66_Ra1oQJDxiOskm6ee1PkRP0Z3uO-2KsNgPxtyuh9O2IqoBVBu-DXXcOAyK5JOfpzgbvpWXNSd1Ty9A]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1ZuMbV0rYRxnkQvA1jeqtcIT1-fywmDnbRJMOXglixCwjCkE3h_QkLWCOM6WyHBJLjKlsNDlWQSAE5c1SplKOjj3AEXnuJQ1jYazYgsolvj36LIGV6ms7iBwNFD_2gE7LT2HksWrF50SZTLOi8H52QwF8RsEq_AI_boZsMhe-OOW_lOcahEGOE2ue0rpOLye51oRU2g4Mgn0NkmGlLPxDops0NCF_sGanQFsjISt413dJyGQf_bXrVMTJ2hy_ciHiZ9hRQt14qyQTQ1YxMlLKw4C6UKpRs4nl0sJVsOj__a2ZaXj2DdSJSrdJrlgLngvRhoXP9p1sOIMBSkBeG4Ph4w7MOKPDEzymeadeZ0DbaO0WuqkZwXXqomXt7d3XrLtcEjZJICkJoXLRmw3sS1dH59qNHK26WtmXPRzMaQ5A36poAj1E66_Ra1oQJDxiOskm6ee1PkRP0Z3uO-2KsNgPxtyuh9O2IqoBVBu-DXXcOAyK5JOfpzgbvpWXNSd1Ty9A]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] 07/18/2026 21:14:39 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNN514NJ15O5, RemoteIpAddress = 127.0.0.1, RemotePort = 39764, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1ZuMbV0rYRxnkQvA1jeqtcIT1-fywmDnbRJMOXglixCwjCkE3h_QkLWCOM6WyHBJLjKlsNDlWQSAE5c1SplKOjj3AEXnuJQ1jYazYgsolvj36LIGV6ms7iBwNFD_2gE7LT2HksWrF50SZTLOi8H52QwF8RsEq_AI_boZsMhe-OOW_lOcahEGOE2ue0rpOLye51oRU2g4Mgn0NkmGlLPxDops0NCF_sGanQFsjISt413dJyGQf_bXrVMTJ2hy_ciHiZ9hRQt14qyQTQ1YxMlLKw4C6UKpRs4nl0sJVsOj__a2ZaXj2DdSJSrdJrlgLngvRhoXP9p1sOIMBSkBeG4Ph4w7MOKPDEzymeadeZ0DbaO0WuqkZwXXqomXt7d3XrLtcEjZJICkJoXLRmw3sS1dH59qNHK26WtmXPRzMaQ5A36poAj1E66_Ra1oQJDxiOskm6ee1PkRP0Z3uO-2KsNgPxtyuh9O2IqoBVBu-DXXcOAyK5JOfpzgbvpWXNSd1Ty9A]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_1ZuMbV0rYRxnkQvA1jeqtcIT1-fywmDnbRJMOXglixCwjCkE3h_QkLWCOM6WyHBJLjKlsNDlWQSAE5c1SplKOjj3AEXnuJQ1jYazYgsolvj36LIGV6ms7iBwNFD_2gE7LT2HksWrF50SZTLOi8H52QwF8RsEq_AI_boZsMhe-OOW_lOcahEGOE2ue0rpOLye51oRU2g4Mgn0NkmGlLPxDops0NCF_sGanQFsjISt413dJyGQf_bXrVMTJ2hy_ciHiZ9hRQt14qyQTQ1YxMlLKw4C6UKpRs4nl0sJVsOj__a2ZaXj2DdSJSrdJrlgLngvRhoXP9p1sOIMBSkBeG4Ph4w7MOKPDEzymeadeZ0DbaO0WuqkZwXXqomXt7d3XrLtcEjZJICkJoXLRmw3sS1dH59qNHK26WtmXPRzMaQ5A36poAj1E66_Ra1oQJDxiOskm6ee1PkRP0Z3uO-2KsNgPxtyuh9O2IqoBVBu-DXXcOAyK5JOfpzgbvpWXNSd1Ty9A]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] 07/18/2026 21:14:39 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] 07/18/2026 21:14:39 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:14:39 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:14:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] 07/18/2026 21:14:40 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] 07/18/2026 21:14:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:14:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] 07/18/2026 21:14:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:14:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:14:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:14:40 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] 07/18/2026 21:14:40 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] 07/18/2026 21:14:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] 07/18/2026 21:14:40 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:14:41 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] 07/18/2026 21:14:41 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] 07/18/2026 21:14:41 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! 07/18/2026 21:14:41 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:14:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 21:14:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.5366737. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 21:14:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=244, gen1=102, gen2=10, LatencyMode=Interactive, FreeMemory=6562562048, Live=269415928, HeapSizeBytes=275553856, FragmentedBytes=7331992, TotalCommittedBytes=304578560, PinnedObjectsCount=24, MemoryLoadBytes=1943639162, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 21:14:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:14:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0623907. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0718550. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 21:14:42 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:14:42 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] 07/18/2026 21:14:42 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] 07/18/2026 21:14:46 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 21:14:46 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 21:14:50 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] 07/18/2026 21:16:12 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 07/18/2026 21:16:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0595598 ~ 5.98 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:17:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0603362 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:18:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0616781 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:19:13 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0475459 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:20:12 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:20:12 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:21:12 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0634301 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:21:49 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:21:49 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:22:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0572079 ~ 6.08 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:23:49 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0549808 ~ 6.08 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:24:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0619879 ~ 6.01 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:25:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0542981 ~ 6.08 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:26:50 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.0575928 ~ 6.03 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:26:52 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:26:52 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:27:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0639838 ~ 6.08 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:28:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0572733 ~ 6.08 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:29:52 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0686950 ~ 6.08 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:30:48 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:30:48 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:31:04 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] 07/18/2026 21:31:04 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] 07/18/2026 21:31:04 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] 07/18/2026 21:31:04 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 07/18/2026 20:31:04 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] 07/18/2026 21:31:05 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:31:05 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] 07/18/2026 21:31:05 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] 07/18/2026 21:31:05 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] 07/18/2026 21:31:05 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] 07/18/2026 21:31:05 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] 07/18/2026 21:31:05 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] 07/18/2026 21:31:05 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] 07/18/2026 21:31:05 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:31:05 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:31:05 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:31:05 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=20076a14-ae98-4fc6-abf2-38803ae2a385) 07/18/2026 21:31:05 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... Waiting for exit signal... Successfully set permissions. 07/18/2026 21:31:05 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:31:05 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:31:05 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] 07/18/2026 21:31:05 INFO [Inova.ApiPlugin.FullRecoatLayerClient] [0] FullRecoatLayerClient installed as ILayerClient (full-recoat expansion available) 07/18/2026 21:31:05 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] 07/18/2026 21:31:05 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] 07/18/2026 21:31:05 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ 07/18/2026 21:31:05 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:31:06 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:31:06 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:31:06 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] 07/18/2026 21:31:07 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:31:07 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] 07/18/2026 21:31:07 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:31:07 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:31:07 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:31:07 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] 07/18/2026 21:31:07 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 07/18/2026 21:31:07 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. 07/18/2026 21:31:07 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 07/18/2026 21:31:07 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current 07/18/2026 21:31:07 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] 07/18/2026 21:31:07 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: /home/ppak/SLS4All/Current/appsettings.toml /home/ppak/SLS4All/Current/appsettings.Inova.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml /home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] 07/18/2026 21:31:10 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/5e1ed525-9b2f-4fec-9aed-c1eb2af8f3d0.sh [SystemPrinterHostname.cs@140] 07/18/2026 21:31:10 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] 07/18/2026 21:31:11 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNN51DVK8CA8, RemoteIpAddress = 127.0.0.1, RemotePort = 36068, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_3sYLE9I3guJNrDBG0hzwxQeFCN1HNqCmJ1DkxNtlO2g9CPgMKvRuOwoaAwKXcD7HVJz9tNPI92PAza6h6ZMZ1EfgZmDwRXRxJem14GjZQ5m7qVwqCk6yo44SdP7XLHunRlyWHV4DmpBaz8jBfyBemXB2k8VkHnSkRPwKHW8ya-XOruDGd3w-PYmWRBYp8f-zDRX_Zkj7zjhw2mgbyI5R82OcRUhNJNVMewUm8ngqRE6mE_9jL3giwhN0JvzW6I_Z-CrvOB_5VoLhLKlP9sIAKkOBuXBq5_qCn-9M6VveLGx-TLm6tv7x5aaVALZS-79dChdpd_A6iYpEMTpfaZ3sPrSP2aw96o6-dMiKOOb6yk2K4dJ7VGK3AftSxt3pChRTcjU0n-sAkGs8c7j9egILtheZGU5AAGsxLeI7yYEeKYpXiCbNei-4zubV3zT8tecO5do6L7eI0hQFflYRIx9DYgyl5ZGDRHErWRK0spodYpcBkGH-aVsfffv_O1fHr0ejc]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_3sYLE9I3guJNrDBG0hzwxQeFCN1HNqCmJ1DkxNtlO2g9CPgMKvRuOwoaAwKXcD7HVJz9tNPI92PAza6h6ZMZ1EfgZmDwRXRxJem14GjZQ5m7qVwqCk6yo44SdP7XLHunRlyWHV4DmpBaz8jBfyBemXB2k8VkHnSkRPwKHW8ya-XOruDGd3w-PYmWRBYp8f-zDRX_Zkj7zjhw2mgbyI5R82OcRUhNJNVMewUm8ngqRE6mE_9jL3giwhN0JvzW6I_Z-CrvOB_5VoLhLKlP9sIAKkOBuXBq5_qCn-9M6VveLGx-TLm6tv7x5aaVALZS-79dChdpd_A6iYpEMTpfaZ3sPrSP2aw96o6-dMiKOOb6yk2K4dJ7VGK3AftSxt3pChRTcjU0n-sAkGs8c7j9egILtheZGU5AAGsxLeI7yYEeKYpXiCbNei-4zubV3zT8tecO5do6L7eI0hQFflYRIx9DYgyl5ZGDRHErWRK0spodYpcBkGH-aVsfffv_O1fHr0ejc]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] 07/18/2026 21:31:11 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNN51DVK8CA8, RemoteIpAddress = 127.0.0.1, RemotePort = 36068, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_3sYLE9I3guJNrDBG0hzwxQeFCN1HNqCmJ1DkxNtlO2g9CPgMKvRuOwoaAwKXcD7HVJz9tNPI92PAza6h6ZMZ1EfgZmDwRXRxJem14GjZQ5m7qVwqCk6yo44SdP7XLHunRlyWHV4DmpBaz8jBfyBemXB2k8VkHnSkRPwKHW8ya-XOruDGd3w-PYmWRBYp8f-zDRX_Zkj7zjhw2mgbyI5R82OcRUhNJNVMewUm8ngqRE6mE_9jL3giwhN0JvzW6I_Z-CrvOB_5VoLhLKlP9sIAKkOBuXBq5_qCn-9M6VveLGx-TLm6tv7x5aaVALZS-79dChdpd_A6iYpEMTpfaZ3sPrSP2aw96o6-dMiKOOb6yk2K4dJ7VGK3AftSxt3pChRTcjU0n-sAkGs8c7j9egILtheZGU5AAGsxLeI7yYEeKYpXiCbNei-4zubV3zT8tecO5do6L7eI0hQFflYRIx9DYgyl5ZGDRHErWRK0spodYpcBkGH-aVsfffv_O1fHr0ejc]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_3sYLE9I3guJNrDBG0hzwxQeFCN1HNqCmJ1DkxNtlO2g9CPgMKvRuOwoaAwKXcD7HVJz9tNPI92PAza6h6ZMZ1EfgZmDwRXRxJem14GjZQ5m7qVwqCk6yo44SdP7XLHunRlyWHV4DmpBaz8jBfyBemXB2k8VkHnSkRPwKHW8ya-XOruDGd3w-PYmWRBYp8f-zDRX_Zkj7zjhw2mgbyI5R82OcRUhNJNVMewUm8ngqRE6mE_9jL3giwhN0JvzW6I_Z-CrvOB_5VoLhLKlP9sIAKkOBuXBq5_qCn-9M6VveLGx-TLm6tv7x5aaVALZS-79dChdpd_A6iYpEMTpfaZ3sPrSP2aw96o6-dMiKOOb6yk2K4dJ7VGK3AftSxt3pChRTcjU0n-sAkGs8c7j9egILtheZGU5AAGsxLeI7yYEeKYpXiCbNei-4zubV3zT8tecO5do6L7eI0hQFflYRIx9DYgyl5ZGDRHErWRK0spodYpcBkGH-aVsfffv_O1fHr0ejc]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] 07/18/2026 21:31:11 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNN51DVK8CA8, RemoteIpAddress = 127.0.0.1, RemotePort = 36068, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_3sYLE9I3guJNrDBG0hzwxQeFCN1HNqCmJ1DkxNtlO2g9CPgMKvRuOwoaAwKXcD7HVJz9tNPI92PAza6h6ZMZ1EfgZmDwRXRxJem14GjZQ5m7qVwqCk6yo44SdP7XLHunRlyWHV4DmpBaz8jBfyBemXB2k8VkHnSkRPwKHW8ya-XOruDGd3w-PYmWRBYp8f-zDRX_Zkj7zjhw2mgbyI5R82OcRUhNJNVMewUm8ngqRE6mE_9jL3giwhN0JvzW6I_Z-CrvOB_5VoLhLKlP9sIAKkOBuXBq5_qCn-9M6VveLGx-TLm6tv7x5aaVALZS-79dChdpd_A6iYpEMTpfaZ3sPrSP2aw96o6-dMiKOOb6yk2K4dJ7VGK3AftSxt3pChRTcjU0n-sAkGs8c7j9egILtheZGU5AAGsxLeI7yYEeKYpXiCbNei-4zubV3zT8tecO5do6L7eI0hQFflYRIx9DYgyl5ZGDRHErWRK0spodYpcBkGH-aVsfffv_O1fHr0ejc]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_3sYLE9I3guJNrDBG0hzwxQeFCN1HNqCmJ1DkxNtlO2g9CPgMKvRuOwoaAwKXcD7HVJz9tNPI92PAza6h6ZMZ1EfgZmDwRXRxJem14GjZQ5m7qVwqCk6yo44SdP7XLHunRlyWHV4DmpBaz8jBfyBemXB2k8VkHnSkRPwKHW8ya-XOruDGd3w-PYmWRBYp8f-zDRX_Zkj7zjhw2mgbyI5R82OcRUhNJNVMewUm8ngqRE6mE_9jL3giwhN0JvzW6I_Z-CrvOB_5VoLhLKlP9sIAKkOBuXBq5_qCn-9M6VveLGx-TLm6tv7x5aaVALZS-79dChdpd_A6iYpEMTpfaZ3sPrSP2aw96o6-dMiKOOb6yk2K4dJ7VGK3AftSxt3pChRTcjU0n-sAkGs8c7j9egILtheZGU5AAGsxLeI7yYEeKYpXiCbNei-4zubV3zT8tecO5do6L7eI0hQFflYRIx9DYgyl5ZGDRHErWRK0spodYpcBkGH-aVsfffv_O1fHr0ejc]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] 07/18/2026 21:31:11 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] 07/18/2026 21:31:12 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:31:12 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:31:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] 07/18/2026 21:31:13 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] 07/18/2026 21:31:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:31:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] 07/18/2026 21:31:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:31:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:31:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:31:13 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] 07/18/2026 21:31:14 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] 07/18/2026 21:31:16 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:31:16 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:31:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] 07/18/2026 21:31:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:31:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] 07/18/2026 21:31:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:31:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:31:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] 07/18/2026 21:31:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] 07/18/2026 21:31:17 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:31:17 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] 07/18/2026 21:31:18 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] 07/18/2026 21:31:18 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! 07/18/2026 21:31:18 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] 07/18/2026 21:31:18 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] 07/18/2026 21:31:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:31:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 21:31:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.5163203. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 21:31:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=490, gen1=69, gen2=10, LatencyMode=Interactive, FreeMemory=6581403648, Live=298506808, HeapSizeBytes=303549272, FragmentedBytes=5144240, TotalCommittedBytes=330891264, PinnedObjectsCount=24, MemoryLoadBytes=1943639162, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 21:31:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:31:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0628525. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0719126. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 21:31:18 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:31:18 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] 07/18/2026 21:31:18 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] 07/18/2026 21:31:21 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] 07/18/2026 21:32:30 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 21:32:30 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 21:33:04 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 07/18/2026 21:33:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0726757 ~ 5.99 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:34:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0763745 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:35:09 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] 07/18/2026 21:35:09 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] 07/18/2026 21:35:09 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] 07/18/2026 21:35:09 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 07/18/2026 20:35:09 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] 07/18/2026 21:35:10 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:35:10 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] 07/18/2026 21:35:10 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] 07/18/2026 21:35:10 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] 07/18/2026 21:35:10 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] 07/18/2026 21:35:10 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] 07/18/2026 21:35:10 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] 07/18/2026 21:35:10 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] 07/18/2026 21:35:10 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:35:10 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:35:10 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:35:10 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=51c7c783-d4a3-46e7-bac5-b186e4220699) 07/18/2026 21:35:10 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... Waiting for exit signal... Successfully set permissions. 07/18/2026 21:35:10 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:35:10 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:35:10 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] 07/18/2026 21:35:10 INFO [Inova.ApiPlugin.FullRecoatLayerClient] [0] FullRecoatLayerClient installed as ILayerClient (full-recoat expansion available) 07/18/2026 21:35:10 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] 07/18/2026 21:35:10 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] 07/18/2026 21:35:10 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ 07/18/2026 21:35:10 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:35:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] 07/18/2026 21:35:12 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:35:12 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] 07/18/2026 21:35:12 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:35:12 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:35:12 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:35:12 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] 07/18/2026 21:35:12 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 07/18/2026 21:35:12 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. 07/18/2026 21:35:12 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 07/18/2026 21:35:12 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current 07/18/2026 21:35:12 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] 07/18/2026 21:35:12 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: /home/ppak/SLS4All/Current/appsettings.toml /home/ppak/SLS4All/Current/appsettings.Inova.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml /home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] 07/18/2026 21:35:13 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 21:35:13 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 21:35:15 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/b7957edd-c518-427f-89bc-c978730297a4.sh [SystemPrinterHostname.cs@140] 07/18/2026 21:35:15 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] 07/18/2026 21:35:17 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNN51G8K8OL6, RemoteIpAddress = 127.0.0.1, RemotePort = 44772, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2S9IOBW9yKQCJZCRM5oeFdpf5Orv4WuerJ-QvMzz2extaww7PPVtwuyKsUW7K2UulzERQLgWRiKMx-JcKoDTe5MlvsUNybpHCRRWXkzRsAzWY0xuh0Hpu0WmiY_q5RYGsSCI6w8AtT9dj8i6TJCjEIaKDlpsjfUEe9nXFYb9Ox_hcCs2BiVzy_iVEQIzIL_dhPsehU2f3TZO3GraC61Gl6-bR6hl_BY45mpsxRMdw_Q0XQKjL77PyCYj8Sm_8Wj-AKC-QGt6IxFCabWr-OJz5uUEjrT9hMRf-bEdMwovxCDNLZ7fySjx-E8okWWZijvnbCZPwCYmx1o8EfGfjKb193LiXgDET7PpuY3N9PNgzsn9eTw3CwNvg1muhcmamfrWq3VJ3vJoKnpSfL85D3XJEjn83PY5hxwzFp0iuoLkJvV8OrDCQ7E_gDtnDZlmFzxdQARUYRYmDzzwPIrsL4LS8wr8z1Z1l7m3yXcmLqtQeONYipzAiJmc3ZiSsp-FOscNI]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2S9IOBW9yKQCJZCRM5oeFdpf5Orv4WuerJ-QvMzz2extaww7PPVtwuyKsUW7K2UulzERQLgWRiKMx-JcKoDTe5MlvsUNybpHCRRWXkzRsAzWY0xuh0Hpu0WmiY_q5RYGsSCI6w8AtT9dj8i6TJCjEIaKDlpsjfUEe9nXFYb9Ox_hcCs2BiVzy_iVEQIzIL_dhPsehU2f3TZO3GraC61Gl6-bR6hl_BY45mpsxRMdw_Q0XQKjL77PyCYj8Sm_8Wj-AKC-QGt6IxFCabWr-OJz5uUEjrT9hMRf-bEdMwovxCDNLZ7fySjx-E8okWWZijvnbCZPwCYmx1o8EfGfjKb193LiXgDET7PpuY3N9PNgzsn9eTw3CwNvg1muhcmamfrWq3VJ3vJoKnpSfL85D3XJEjn83PY5hxwzFp0iuoLkJvV8OrDCQ7E_gDtnDZlmFzxdQARUYRYmDzzwPIrsL4LS8wr8z1Z1l7m3yXcmLqtQeONYipzAiJmc3ZiSsp-FOscNI]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] 07/18/2026 21:35:17 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNN51G8K8OL6, RemoteIpAddress = 127.0.0.1, RemotePort = 44772, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2S9IOBW9yKQCJZCRM5oeFdpf5Orv4WuerJ-QvMzz2extaww7PPVtwuyKsUW7K2UulzERQLgWRiKMx-JcKoDTe5MlvsUNybpHCRRWXkzRsAzWY0xuh0Hpu0WmiY_q5RYGsSCI6w8AtT9dj8i6TJCjEIaKDlpsjfUEe9nXFYb9Ox_hcCs2BiVzy_iVEQIzIL_dhPsehU2f3TZO3GraC61Gl6-bR6hl_BY45mpsxRMdw_Q0XQKjL77PyCYj8Sm_8Wj-AKC-QGt6IxFCabWr-OJz5uUEjrT9hMRf-bEdMwovxCDNLZ7fySjx-E8okWWZijvnbCZPwCYmx1o8EfGfjKb193LiXgDET7PpuY3N9PNgzsn9eTw3CwNvg1muhcmamfrWq3VJ3vJoKnpSfL85D3XJEjn83PY5hxwzFp0iuoLkJvV8OrDCQ7E_gDtnDZlmFzxdQARUYRYmDzzwPIrsL4LS8wr8z1Z1l7m3yXcmLqtQeONYipzAiJmc3ZiSsp-FOscNI]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2S9IOBW9yKQCJZCRM5oeFdpf5Orv4WuerJ-QvMzz2extaww7PPVtwuyKsUW7K2UulzERQLgWRiKMx-JcKoDTe5MlvsUNybpHCRRWXkzRsAzWY0xuh0Hpu0WmiY_q5RYGsSCI6w8AtT9dj8i6TJCjEIaKDlpsjfUEe9nXFYb9Ox_hcCs2BiVzy_iVEQIzIL_dhPsehU2f3TZO3GraC61Gl6-bR6hl_BY45mpsxRMdw_Q0XQKjL77PyCYj8Sm_8Wj-AKC-QGt6IxFCabWr-OJz5uUEjrT9hMRf-bEdMwovxCDNLZ7fySjx-E8okWWZijvnbCZPwCYmx1o8EfGfjKb193LiXgDET7PpuY3N9PNgzsn9eTw3CwNvg1muhcmamfrWq3VJ3vJoKnpSfL85D3XJEjn83PY5hxwzFp0iuoLkJvV8OrDCQ7E_gDtnDZlmFzxdQARUYRYmDzzwPIrsL4LS8wr8z1Z1l7m3yXcmLqtQeONYipzAiJmc3ZiSsp-FOscNI]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] 07/18/2026 21:35:17 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNN51G8K8OL6, RemoteIpAddress = 127.0.0.1, RemotePort = 44772, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2S9IOBW9yKQCJZCRM5oeFdpf5Orv4WuerJ-QvMzz2extaww7PPVtwuyKsUW7K2UulzERQLgWRiKMx-JcKoDTe5MlvsUNybpHCRRWXkzRsAzWY0xuh0Hpu0WmiY_q5RYGsSCI6w8AtT9dj8i6TJCjEIaKDlpsjfUEe9nXFYb9Ox_hcCs2BiVzy_iVEQIzIL_dhPsehU2f3TZO3GraC61Gl6-bR6hl_BY45mpsxRMdw_Q0XQKjL77PyCYj8Sm_8Wj-AKC-QGt6IxFCabWr-OJz5uUEjrT9hMRf-bEdMwovxCDNLZ7fySjx-E8okWWZijvnbCZPwCYmx1o8EfGfjKb193LiXgDET7PpuY3N9PNgzsn9eTw3CwNvg1muhcmamfrWq3VJ3vJoKnpSfL85D3XJEjn83PY5hxwzFp0iuoLkJvV8OrDCQ7E_gDtnDZlmFzxdQARUYRYmDzzwPIrsL4LS8wr8z1Z1l7m3yXcmLqtQeONYipzAiJmc3ZiSsp-FOscNI]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2S9IOBW9yKQCJZCRM5oeFdpf5Orv4WuerJ-QvMzz2extaww7PPVtwuyKsUW7K2UulzERQLgWRiKMx-JcKoDTe5MlvsUNybpHCRRWXkzRsAzWY0xuh0Hpu0WmiY_q5RYGsSCI6w8AtT9dj8i6TJCjEIaKDlpsjfUEe9nXFYb9Ox_hcCs2BiVzy_iVEQIzIL_dhPsehU2f3TZO3GraC61Gl6-bR6hl_BY45mpsxRMdw_Q0XQKjL77PyCYj8Sm_8Wj-AKC-QGt6IxFCabWr-OJz5uUEjrT9hMRf-bEdMwovxCDNLZ7fySjx-E8okWWZijvnbCZPwCYmx1o8EfGfjKb193LiXgDET7PpuY3N9PNgzsn9eTw3CwNvg1muhcmamfrWq3VJ3vJoKnpSfL85D3XJEjn83PY5hxwzFp0iuoLkJvV8OrDCQ7E_gDtnDZlmFzxdQARUYRYmDzzwPIrsL4LS8wr8z1Z1l7m3yXcmLqtQeONYipzAiJmc3ZiSsp-FOscNI]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] 07/18/2026 21:35:17 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] 07/18/2026 21:35:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:35:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:35:18 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] 07/18/2026 21:35:18 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] 07/18/2026 21:35:19 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:35:19 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] 07/18/2026 21:35:19 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:35:19 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:35:19 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:35:19 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] 07/18/2026 21:35:20 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] 07/18/2026 21:35:21 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:35:21 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:35:21 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] 07/18/2026 21:35:22 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:35:22 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] 07/18/2026 21:35:22 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:35:22 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:35:22 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] 07/18/2026 21:35:22 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] 07/18/2026 21:35:22 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:35:22 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] 07/18/2026 21:35:22 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] 07/18/2026 21:35:23 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! 07/18/2026 21:35:23 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] 07/18/2026 21:35:23 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] 07/18/2026 21:35:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:35:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 21:35:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4163011. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 21:35:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=432, gen1=66, gen2=10, LatencyMode=Interactive, FreeMemory=6515900416, Live=294282824, HeapSizeBytes=297861720, FragmentedBytes=4636312, TotalCommittedBytes=332447744, PinnedObjectsCount=24, MemoryLoadBytes=2028145213, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 21:35:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:35:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631660. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0656005. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 21:35:23 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:35:23 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] 07/18/2026 21:35:23 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] 07/18/2026 21:35:27 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] 07/18/2026 21:36:51 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 07/18/2026 21:36:51 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0908467 ~ 5.97 samples/sec, 1 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:37:33 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] 07/18/2026 21:37:33 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] 07/18/2026 21:37:33 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] 07/18/2026 21:37:33 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 07/18/2026 20:37:33 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] 07/18/2026 21:37:34 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:37:34 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] 07/18/2026 21:37:34 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] 07/18/2026 21:37:34 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] 07/18/2026 21:37:34 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] 07/18/2026 21:37:34 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] 07/18/2026 21:37:34 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] 07/18/2026 21:37:34 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] 07/18/2026 21:37:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:37:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:37:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:37:34 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=153b6155-d443-43db-910e-4a0ca1b25862) 07/18/2026 21:37:34 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] 07/18/2026 21:37:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:37:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:37:34 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... Waiting for exit signal... Successfully set permissions. 07/18/2026 21:37:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:37:34 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:37:34 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] 07/18/2026 21:37:34 INFO [Inova.ApiPlugin.FullRecoatLayerClient] [0] FullRecoatLayerClient installed as ILayerClient (full-recoat expansion available) 07/18/2026 21:37:34 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:37:35 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ 07/18/2026 21:37:35 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:37:35 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] 07/18/2026 21:37:35 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:37:35 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] 07/18/2026 21:37:35 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] 07/18/2026 21:37:36 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] 07/18/2026 21:37:37 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 07/18/2026 21:37:37 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. 07/18/2026 21:37:37 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 07/18/2026 21:37:37 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current 07/18/2026 21:37:37 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] 07/18/2026 21:37:37 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: /home/ppak/SLS4All/Current/appsettings.toml /home/ppak/SLS4All/Current/appsettings.Inova.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml /home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] 07/18/2026 21:37:41 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:37:41 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:37:41 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/87cebcde-006b-44e0-8664-d5bf4fcc16cd.sh [SystemPrinterHostname.cs@140] 07/18/2026 21:37:41 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] 07/18/2026 21:37:42 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] 07/18/2026 21:37:43 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:37:43 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] 07/18/2026 21:37:43 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:37:43 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:37:43 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:37:43 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] 07/18/2026 21:37:43 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] 07/18/2026 21:37:43 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] 07/18/2026 21:37:43 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! 07/18/2026 21:37:43 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:37:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 21:37:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4690852. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 21:37:44 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNN51HJ46LEV, RemoteIpAddress = 127.0.0.1, RemotePort = 36476, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0Vlmr2cXatrjW6ttpvNukSVWE--AiXJKOH6Xz8p2tTqElDhJLRdsFvN8fwC7y6McfZbmcCvSBAmwjQTT9Hecof_YNMeT3hnUqypWy_pKrNl-tSMyly1CREn8OnBnkmvBQUbQN9ZqtqH8igvcgrq11GrzfCBldXDlWOQvHW_SBwidR98AYRFOKDxZ2OyLVtI6mXUaej9Q6rxQJEWFMvxXNUa8cGriSUvZiUOO1jmMGSFdV_7iPJUE9Bc6x3wTW4lF1JZg4oEBaeX1kAy94Wi5Feml8kORbdzu8GDH61xEzqMBXSKuk9JJ0wfhU5JCLodkVvl13zvA4gGZrmqrqvEQZWSHl2sqKy7aexGbvs-UdWpIiRmn04oUcXqhzckJWDTk4Mxg22DZzGAVwsQsrPrSDZjVzECUJ5H2ssDGsRdovECgd7FlabcT6dJRbFlR2vn4weIJmetJgXk41ACb57TwsVjbZjlP0yX89MgJpWUTyNDq_NrKof1xDQ8p2V6rQpcg4]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0Vlmr2cXatrjW6ttpvNukSVWE--AiXJKOH6Xz8p2tTqElDhJLRdsFvN8fwC7y6McfZbmcCvSBAmwjQTT9Hecof_YNMeT3hnUqypWy_pKrNl-tSMyly1CREn8OnBnkmvBQUbQN9ZqtqH8igvcgrq11GrzfCBldXDlWOQvHW_SBwidR98AYRFOKDxZ2OyLVtI6mXUaej9Q6rxQJEWFMvxXNUa8cGriSUvZiUOO1jmMGSFdV_7iPJUE9Bc6x3wTW4lF1JZg4oEBaeX1kAy94Wi5Feml8kORbdzu8GDH61xEzqMBXSKuk9JJ0wfhU5JCLodkVvl13zvA4gGZrmqrqvEQZWSHl2sqKy7aexGbvs-UdWpIiRmn04oUcXqhzckJWDTk4Mxg22DZzGAVwsQsrPrSDZjVzECUJ5H2ssDGsRdovECgd7FlabcT6dJRbFlR2vn4weIJmetJgXk41ACb57TwsVjbZjlP0yX89MgJpWUTyNDq_NrKof1xDQ8p2V6rQpcg4]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] 07/18/2026 21:37:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=313, gen1=67, gen2=10, LatencyMode=Interactive, FreeMemory=6798622720, Live=280027656, HeapSizeBytes=285521328, FragmentedBytes=6150200, TotalCommittedBytes=314671104, PinnedObjectsCount=24, MemoryLoadBytes=1774627061, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 21:37:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:37:44 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNN51HJ46LEV, RemoteIpAddress = 127.0.0.1, RemotePort = 36476, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0Vlmr2cXatrjW6ttpvNukSVWE--AiXJKOH6Xz8p2tTqElDhJLRdsFvN8fwC7y6McfZbmcCvSBAmwjQTT9Hecof_YNMeT3hnUqypWy_pKrNl-tSMyly1CREn8OnBnkmvBQUbQN9ZqtqH8igvcgrq11GrzfCBldXDlWOQvHW_SBwidR98AYRFOKDxZ2OyLVtI6mXUaej9Q6rxQJEWFMvxXNUa8cGriSUvZiUOO1jmMGSFdV_7iPJUE9Bc6x3wTW4lF1JZg4oEBaeX1kAy94Wi5Feml8kORbdzu8GDH61xEzqMBXSKuk9JJ0wfhU5JCLodkVvl13zvA4gGZrmqrqvEQZWSHl2sqKy7aexGbvs-UdWpIiRmn04oUcXqhzckJWDTk4Mxg22DZzGAVwsQsrPrSDZjVzECUJ5H2ssDGsRdovECgd7FlabcT6dJRbFlR2vn4weIJmetJgXk41ACb57TwsVjbZjlP0yX89MgJpWUTyNDq_NrKof1xDQ8p2V6rQpcg4]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0Vlmr2cXatrjW6ttpvNukSVWE--AiXJKOH6Xz8p2tTqElDhJLRdsFvN8fwC7y6McfZbmcCvSBAmwjQTT9Hecof_YNMeT3hnUqypWy_pKrNl-tSMyly1CREn8OnBnkmvBQUbQN9ZqtqH8igvcgrq11GrzfCBldXDlWOQvHW_SBwidR98AYRFOKDxZ2OyLVtI6mXUaej9Q6rxQJEWFMvxXNUa8cGriSUvZiUOO1jmMGSFdV_7iPJUE9Bc6x3wTW4lF1JZg4oEBaeX1kAy94Wi5Feml8kORbdzu8GDH61xEzqMBXSKuk9JJ0wfhU5JCLodkVvl13zvA4gGZrmqrqvEQZWSHl2sqKy7aexGbvs-UdWpIiRmn04oUcXqhzckJWDTk4Mxg22DZzGAVwsQsrPrSDZjVzECUJ5H2ssDGsRdovECgd7FlabcT6dJRbFlR2vn4weIJmetJgXk41ACb57TwsVjbZjlP0yX89MgJpWUTyNDq_NrKof1xDQ8p2V6rQpcg4]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] 07/18/2026 21:37:44 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNN51HJ46LEV, RemoteIpAddress = 127.0.0.1, RemotePort = 36476, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0Vlmr2cXatrjW6ttpvNukSVWE--AiXJKOH6Xz8p2tTqElDhJLRdsFvN8fwC7y6McfZbmcCvSBAmwjQTT9Hecof_YNMeT3hnUqypWy_pKrNl-tSMyly1CREn8OnBnkmvBQUbQN9ZqtqH8igvcgrq11GrzfCBldXDlWOQvHW_SBwidR98AYRFOKDxZ2OyLVtI6mXUaej9Q6rxQJEWFMvxXNUa8cGriSUvZiUOO1jmMGSFdV_7iPJUE9Bc6x3wTW4lF1JZg4oEBaeX1kAy94Wi5Feml8kORbdzu8GDH61xEzqMBXSKuk9JJ0wfhU5JCLodkVvl13zvA4gGZrmqrqvEQZWSHl2sqKy7aexGbvs-UdWpIiRmn04oUcXqhzckJWDTk4Mxg22DZzGAVwsQsrPrSDZjVzECUJ5H2ssDGsRdovECgd7FlabcT6dJRbFlR2vn4weIJmetJgXk41ACb57TwsVjbZjlP0yX89MgJpWUTyNDq_NrKof1xDQ8p2V6rQpcg4]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_0Vlmr2cXatrjW6ttpvNukSVWE--AiXJKOH6Xz8p2tTqElDhJLRdsFvN8fwC7y6McfZbmcCvSBAmwjQTT9Hecof_YNMeT3hnUqypWy_pKrNl-tSMyly1CREn8OnBnkmvBQUbQN9ZqtqH8igvcgrq11GrzfCBldXDlWOQvHW_SBwidR98AYRFOKDxZ2OyLVtI6mXUaej9Q6rxQJEWFMvxXNUa8cGriSUvZiUOO1jmMGSFdV_7iPJUE9Bc6x3wTW4lF1JZg4oEBaeX1kAy94Wi5Feml8kORbdzu8GDH61xEzqMBXSKuk9JJ0wfhU5JCLodkVvl13zvA4gGZrmqrqvEQZWSHl2sqKy7aexGbvs-UdWpIiRmn04oUcXqhzckJWDTk4Mxg22DZzGAVwsQsrPrSDZjVzECUJ5H2ssDGsRdovECgd7FlabcT6dJRbFlR2vn4weIJmetJgXk41ACb57TwsVjbZjlP0yX89MgJpWUTyNDq_NrKof1xDQ8p2V6rQpcg4]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] 07/18/2026 21:37:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627469. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0688151. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 21:37:44 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:37:44 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] 07/18/2026 21:37:44 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] 07/18/2026 21:37:44 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] 07/18/2026 21:37:45 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] 07/18/2026 21:37:47 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] 07/18/2026 21:37:49 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] 07/18/2026 21:38:34 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 21:38:34 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 21:39:05 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 07/18/2026 21:39:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1075880 ~ 6.01 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:40:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0669719 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:41:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0737924 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:42:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0674601 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:42:38 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:42:38 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:43:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0567946 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:44:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0657430 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:45:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0619205 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:46:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0716886 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:47:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0506489 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:48:38 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0630768 ~ 6.08 samples/sec, 3 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:49:36 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:49:36 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:50:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0514550 ~ 6.08 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:51:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0638750 ~ 6.01 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:52:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0622459 ~ 6.08 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:53:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0616707 ~ 6.08 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:54:36 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0585653 ~ 6.08 samples/sec, 4 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:54:37 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:54:37 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:55:08 INFO [SLS4All.Compact.ProgramWeb] [0] Creating constructables [StartupBase.cs@492] 07/18/2026 21:55:08 INFO [SLS4All.Compact.ProgramWeb] [0] Finished constructables [StartupBase.cs@501] 07/18/2026 21:55:08 INFO [SLS4All.Compact.ProgramWeb] [0] Creating delayed constructables [StartupBase.cs@515] 07/18/2026 21:55:08 INFO [SLS4All.Compact.ProgramWeb] [0] Host is starting to run at 07/18/2026 20:55:08 UTC, version=1.206.139.2317 [ProgramWeb.cs@69] 07/18/2026 21:55:09 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:55:09 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Ensuring MCU runners are started, since EnableRunner is true [McuPrinterClient.cs@134] 07/18/2026 21:55:09 INFO [SLS4All.Compact.McuClient.McuManager] [0] Will start with 3 MCUs: mcu, zero1, host [McuManager.cs@301] 07/18/2026 21:55:09 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU zero1 is starting Run() [McuManager.cs@326] 07/18/2026 21:55:09 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_host_RaspberryPi5.sh [LoggedScriptRunner.cs@105] 07/18/2026 21:55:09 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU host is starting Run() [McuManager.cs@326] 07/18/2026 21:55:09 INFO [SLS4All.Compact.McuClient.McuManager] [0] MCU mcu is starting Run() [McuManager.cs@326] 07/18/2026 21:55:09 INFO [SLS4All.Compact.Printer.McuHostRunner] [0] Starting script/binary: /home/ppak/SLS4All/Current/Firmware/linux_mcuapp_RaspberryPi5.sh --no-paging --dumpable --Application:ConfigurationSources:0="/home/ppak/SLS4All/Current/appsettings.toml" --Application:ConfigurationSources:1="/home/ppak/SLS4All/Current/appsettings.Inova.toml" --Application:ConfigurationSources:2="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml" --Application:ConfigurationSources:3="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml" --Application:ConfigurationSources:4="/home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml" --Application:ConfigurationSources:5="/home/ppak/SLS4All/Configuration/appsettings.user.toml" [LoggedScriptRunner.cs@105] 07/18/2026 21:55:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:55:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:55:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams are connecting [PipedMcuProxy.cs@466] 07/18/2026 21:55:09 INFO [Inova.ApiPlugin.LoggingCodePlotter] [0] LoggingCodePlotter wraps SLS4All.Compact.Slicing.ImageCodePlotter, SLS4All.Compact.Processing, Version=1.206.139.2317, Culture=neutral, PublicKeyToken=null (processEpoch=45a033e5-c4e2-45b1-a1be-4137fd6e5458) 07/18/2026 21:55:09 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Opening I2c device [Mlx90640Camera.cs@202] 07/18/2026 21:55:09 DBUG [SLS4All.Compact.Printer.McuRunnerOutput] [0] Starting Klipper MCU/Host 'linux_arm64.elf' for architecture aarch64... Waiting for exit signal... Successfully set permissions. 07/18/2026 21:55:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:55:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU host, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:55:09 DBUG [SLS4All.Compact.Printer.PrinterPerformanceProvider] [0] IO will be collected for block device nvme0n1 which should correspond to app data directory /home/ppak/SLS4All [PrinterPerformanceProvider.cs@149] 07/18/2026 21:55:09 INFO [Inova.ApiPlugin.FullRecoatLayerClient] [0] FullRecoatLayerClient installed as ILayerClient (full-recoat expansion available) 07/18/2026 21:55:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:55:09 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU mcu, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:55:09 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:55:09 INFO [SLS4All.Compact.ProgramWeb] [0] Finished delayed constructables [StartupBase.cs@524] 07/18/2026 21:55:09 INFO [Inova.ApiPlugin.InovaApiPlugin] [0] Inova API plugin listening on http://+:5001/ 07/18/2026 21:55:10 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 21:55:10 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 21:55:10 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU host in 65 batches [McuBase.cs@749] 07/18/2026 21:55:10 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU mcu in 60 batches [McuBase.cs@749] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu host is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU host [McuConfigCommands.cs@64] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU host printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU host, 1024 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU host is ready [McuBase.cs@410] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu mcu is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU mcu [McuConfigCommands.cs@64] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU mcu printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU mcu, 2400 moves available, 2400 requested [McuBase.cs@710] 07/18/2026 21:55:11 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU mcu is ready [McuBase.cs@410] 07/18/2026 21:55:11 INFO [Microsoft.Hosting.Lifetime] [ListeningOnAddress] Now listening on: http://0.0.0.0:80 07/18/2026 21:55:11 INFO [Microsoft.Hosting.Lifetime] [0] Application started. Press Ctrl+C to shut down. 07/18/2026 21:55:11 INFO [Microsoft.Hosting.Lifetime] [0] Hosting environment: Inova-RaspberryPi5 07/18/2026 21:55:11 INFO [Microsoft.Hosting.Lifetime] [0] Content root path: /home/ppak/SLS4All/Current 07/18/2026 21:55:11 DBUG [SLS4All.Compact.Security.SignInManager] [0] Generating nonce for { Connection = { Id = , RemoteIpAddress = , RemotePort = , LocalPort = , ClientCertificate = }, RequestHeaders = } [SignInManager.cs@211] 07/18/2026 21:55:11 INFO [SLS4All.Compact.ProgramWeb] [0] Configuration was loaded from: /home/ppak/SLS4All/Current/appsettings.toml /home/ppak/SLS4All/Current/appsettings.Inova.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-McuClient.toml /home/ppak/SLS4All/Current/appsettings.Inova-RaspberryPi5-libcamera.toml /home/ppak/SLS4All/Configuration/appsettings.user.toml [StartupBase.cs@554] 07/18/2026 21:55:15 INFO [SLS4All.Compact.Security.SystemPrinterHostname] [0] Running get hostname script /tmp/eba51c78-dba2-4f4c-b956-95ff0be6ec98.sh [SystemPrinterHostname.cs@140] 07/18/2026 21:55:15 DBUG [SLS4All.Compact.Security.SystemPrinterHostname] [0] Returned system hostname: inova [SystemPrinterHostname.cs@158] 07/18/2026 21:55:16 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 proxy streams have connected [PipedMcuProxy.cs@470] 07/18/2026 21:55:16 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Created device for MCU zero1, attempt = 0, info = (null) [McuBase.cs@343] 07/18/2026 21:55:17 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Got identify config from MCU zero1 in 57 batches [McuBase.cs@749] 07/18/2026 21:55:17 INFO [SLS4All.Compact.Security.SignInManager] [0] Trying to hash login for { Connection = { Id = 0HNN51RE139OQ, RemoteIpAddress = 127.0.0.1, RemotePort = 33886, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2DUxnDFF4PscWtUEr1vh_-XxmCKYp4fvZcyu9NVcA3AGRQSmZIdkK6OncdOAUUVqq3kbuw4W1YGH2dZvrDqRcaC_JKZP6AlBUX9ZNtj7Yk8ARfs7Gx7o3F4-x1N9ZPv_UIyqZ7XhIeqHRiJbBtkhgCijnHn49va6iLrxKplCPnM8pf_10IJSIp8enOjgPNUl4ZA4GOvHWKbTCkaUxKvoUYVzWFA-nY7RFCC2sZV39jbXl--0xqgel3IVehE-qcM2P0fM7Q3to7Nc0lyc82XbWRd-63crKuxObzjPL_HdsCIQKGilpklBeFRMbvjshoE5aO5gqAKab_6_4xPVV9_E4KibLyX8sOVddEx4I5KcnXZ37uvF4kUAhepph-5lOMxFabYjw2MhY9OZp0kzFmIp_lIBfLo2zNlNodqraO8iIIQ3W-wWb5CGIhpJ1UagJcm9nBao1i_Gttd6P81JPY68vF5mUX9_9uXkip8767KVRmg8uls-2Vx_QezR6O-q8fdaI]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2DUxnDFF4PscWtUEr1vh_-XxmCKYp4fvZcyu9NVcA3AGRQSmZIdkK6OncdOAUUVqq3kbuw4W1YGH2dZvrDqRcaC_JKZP6AlBUX9ZNtj7Yk8ARfs7Gx7o3F4-x1N9ZPv_UIyqZ7XhIeqHRiJbBtkhgCijnHn49va6iLrxKplCPnM8pf_10IJSIp8enOjgPNUl4ZA4GOvHWKbTCkaUxKvoUYVzWFA-nY7RFCC2sZV39jbXl--0xqgel3IVehE-qcM2P0fM7Q3to7Nc0lyc82XbWRd-63crKuxObzjPL_HdsCIQKGilpklBeFRMbvjshoE5aO5gqAKab_6_4xPVV9_E4KibLyX8sOVddEx4I5KcnXZ37uvF4kUAhepph-5lOMxFabYjw2MhY9OZp0kzFmIp_lIBfLo2zNlNodqraO8iIIQ3W-wWb5CGIhpJ1UagJcm9nBao1i_Gttd6P81JPY68vF5mUX9_9uXkip8767KVRmg8uls-2Vx_QezR6O-q8fdaI]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@257] 07/18/2026 21:55:17 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing out for { Connection = { Id = 0HNN51RE139OQ, RemoteIpAddress = 127.0.0.1, RemotePort = 33886, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2DUxnDFF4PscWtUEr1vh_-XxmCKYp4fvZcyu9NVcA3AGRQSmZIdkK6OncdOAUUVqq3kbuw4W1YGH2dZvrDqRcaC_JKZP6AlBUX9ZNtj7Yk8ARfs7Gx7o3F4-x1N9ZPv_UIyqZ7XhIeqHRiJbBtkhgCijnHn49va6iLrxKplCPnM8pf_10IJSIp8enOjgPNUl4ZA4GOvHWKbTCkaUxKvoUYVzWFA-nY7RFCC2sZV39jbXl--0xqgel3IVehE-qcM2P0fM7Q3to7Nc0lyc82XbWRd-63crKuxObzjPL_HdsCIQKGilpklBeFRMbvjshoE5aO5gqAKab_6_4xPVV9_E4KibLyX8sOVddEx4I5KcnXZ37uvF4kUAhepph-5lOMxFabYjw2MhY9OZp0kzFmIp_lIBfLo2zNlNodqraO8iIIQ3W-wWb5CGIhpJ1UagJcm9nBao1i_Gttd6P81JPY68vF5mUX9_9uXkip8767KVRmg8uls-2Vx_QezR6O-q8fdaI]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2DUxnDFF4PscWtUEr1vh_-XxmCKYp4fvZcyu9NVcA3AGRQSmZIdkK6OncdOAUUVqq3kbuw4W1YGH2dZvrDqRcaC_JKZP6AlBUX9ZNtj7Yk8ARfs7Gx7o3F4-x1N9ZPv_UIyqZ7XhIeqHRiJbBtkhgCijnHn49va6iLrxKplCPnM8pf_10IJSIp8enOjgPNUl4ZA4GOvHWKbTCkaUxKvoUYVzWFA-nY7RFCC2sZV39jbXl--0xqgel3IVehE-qcM2P0fM7Q3to7Nc0lyc82XbWRd-63crKuxObzjPL_HdsCIQKGilpklBeFRMbvjshoE5aO5gqAKab_6_4xPVV9_E4KibLyX8sOVddEx4I5KcnXZ37uvF4kUAhepph-5lOMxFabYjw2MhY9OZp0kzFmIp_lIBfLo2zNlNodqraO8iIIQ3W-wWb5CGIhpJ1UagJcm9nBao1i_Gttd6P81JPY68vF5mUX9_9uXkip8767KVRmg8uls-2Vx_QezR6O-q8fdaI]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@161] 07/18/2026 21:55:17 INFO [SLS4All.Compact.Security.SignInManager] [0] Signing in for { Connection = { Id = 0HNN51RE139OQ, RemoteIpAddress = 127.0.0.1, RemotePort = 33886, LocalPort = 80, ClientCertificate = }, RequestHeaders = [Accept, text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7]; [Connection, keep-alive]; [Host, 127.0.0.1]; [User-Agent, Mozilla/5.0 (X11; CrOS x86_64 14541.0.0) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/140.0.0.0 Safari/537.36]; [Accept-Encoding, gzip, deflate, br, zstd]; [Accept-Language, en-GB,en-US;q=0.9,en;q=0.8]; [Cookie, .AspNetCore.Antiforgery.7RLzIL2Ii6k=CfDJ8N0snGgQRgFMohL3YTmziDV0xFJNzq3V7eolzOL1SmK88syByVlDGEXpHuv-rOFlw1qvHYaZD64G0M891EmXvFsUewfZWkZ88l0spzpb8faL8HFFOhKg9Fbu8P_PqJ281vS73oF-hgRkMCJ6W9VSXug; .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2DUxnDFF4PscWtUEr1vh_-XxmCKYp4fvZcyu9NVcA3AGRQSmZIdkK6OncdOAUUVqq3kbuw4W1YGH2dZvrDqRcaC_JKZP6AlBUX9ZNtj7Yk8ARfs7Gx7o3F4-x1N9ZPv_UIyqZ7XhIeqHRiJbBtkhgCijnHn49va6iLrxKplCPnM8pf_10IJSIp8enOjgPNUl4ZA4GOvHWKbTCkaUxKvoUYVzWFA-nY7RFCC2sZV39jbXl--0xqgel3IVehE-qcM2P0fM7Q3to7Nc0lyc82XbWRd-63crKuxObzjPL_HdsCIQKGilpklBeFRMbvjshoE5aO5gqAKab_6_4xPVV9_E4KibLyX8sOVddEx4I5KcnXZ37uvF4kUAhepph-5lOMxFabYjw2MhY9OZp0kzFmIp_lIBfLo2zNlNodqraO8iIIQ3W-wWb5CGIhpJ1UagJcm9nBao1i_Gttd6P81JPY68vF5mUX9_9uXkip8767KVRmg8uls-2Vx_QezR6O-q8fdaI]; [Referer, http://127.0.0.1/service-worker.4inovvvyqj.js]; [Upgrade-Insecure-Requests, 1]; [x-cookie, .AspNetCore.Identity.Application=CfDJ8GY_pFo1dJdAsUvzOkiaS_2DUxnDFF4PscWtUEr1vh_-XxmCKYp4fvZcyu9NVcA3AGRQSmZIdkK6OncdOAUUVqq3kbuw4W1YGH2dZvrDqRcaC_JKZP6AlBUX9ZNtj7Yk8ARfs7Gx7o3F4-x1N9ZPv_UIyqZ7XhIeqHRiJbBtkhgCijnHn49va6iLrxKplCPnM8pf_10IJSIp8enOjgPNUl4ZA4GOvHWKbTCkaUxKvoUYVzWFA-nY7RFCC2sZV39jbXl--0xqgel3IVehE-qcM2P0fM7Q3to7Nc0lyc82XbWRd-63crKuxObzjPL_HdsCIQKGilpklBeFRMbvjshoE5aO5gqAKab_6_4xPVV9_E4KibLyX8sOVddEx4I5KcnXZ37uvF4kUAhepph-5lOMxFabYjw2MhY9OZp0kzFmIp_lIBfLo2zNlNodqraO8iIIQ3W-wWb5CGIhpJ1UagJcm9nBao1i_Gttd6P81JPY68vF5mUX9_9uXkip8767KVRmg8uls-2Vx_QezR6O-q8fdaI]; [Sec-Fetch-Site, same-origin]; [Sec-Fetch-Mode, same-origin]; [Sec-Fetch-Dest, empty] } [SignInManager.cs@176] 07/18/2026 21:55:17 DBUG [SLS4All.Compact.Security.PrinterMiddleware] [0] Redirecting using JavaScript to: http://127.0.0.1/?_redir=1 [PrinterMiddleware.cs@140] 07/18/2026 21:55:18 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuClockSyncProxy] [0] Mcu zero1 is ready [PipedMcuClockSyncProxy.cs@190] 07/18/2026 21:55:18 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initializing MCU zero1 [McuConfigCommands.cs@64] 07/18/2026 21:55:18 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (1/2: config) [McuConfigCommands.cs@129] 07/18/2026 21:55:18 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Sending MCU zero1 printer configuration (2/2: init) [McuConfigCommands.cs@139] 07/18/2026 21:55:18 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] Initialized MCU zero1, 346 moves available, 0 requested [McuBase.cs@710] 07/18/2026 21:55:18 INFO [SLS4All.Compact.McuClient.PipedMcu.PipedMcuProxy] [0] MCU zero1 is ready [McuBase.cs@410] 07/18/2026 21:55:18 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handlers [McuManager.cs@342] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target laser (pin=mcu:P2.0) [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.8, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target r (pin=mcu:P0.22) [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target x (pin=mcu:PDAC.1) [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target y (pin=mcu:PDAC.4) [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.10, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z1 (pin=mcu:P2.2) [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target Tmc2209Driver {UartPin = P1.9, UartAddress = 0} [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target z2 (pin=mcu:P0.19) [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target testTemp1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target powderChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target powderChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printBed [InovaGate1] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printBed [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber1 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber1 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber2 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber2 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber3 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber3 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU 'mcu' on target printChamber4 [InovaGate1] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target printChamber4 [HysteresisHeater] [McuManager.cs@347] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.McuClient.McuManager] [0] Calling setup handler for MCU '(null)' on target surface [InovaSurfaceHeater] [McuManager.cs@347] 07/18/2026 21:55:18 INFO [SLS4All.Compact.McuClient.McuManager] [0] Calling PostSetup [McuManager.cs@366] 07/18/2026 21:55:18 INFO [SLS4All.Compact.McuClient.McuManager] [0] Running! 07/18/2026 21:55:18 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager initializers [McuPrinterClient.cs@212] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.Movement.XYHomingInitializer] [0] Homing XY [XYHomingInitializer.cs@32] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:55:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 21:55:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4123880. SinceCollect=00:00:00. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 21:55:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=254, gen1=59, gen2=10, LatencyMode=Interactive, FreeMemory=6581927936, Live=276691128, HeapSizeBytes=280205312, FragmentedBytes=5433704, TotalCommittedBytes=312770560, PinnedObjectsCount=24, MemoryLoadBytes=1943639162, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 21:55:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 21:55:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627801. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0788635. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 21:55:19 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Setting WatchDog enabled: True [PrinterWatchDogMonitor.cs@185] 07/18/2026 21:55:19 INFO [SLS4All.Compact.Printer.McuPrinterClient] [0] Running MCU manager assigned [McuPrinterClient.cs@216] 07/18/2026 21:55:19 INFO [SLS4All.Compact.Printer.PrinterWatchDogMonitor] [0] Printer has connected. Will start WatchDog. [PrinterWatchDogMonitor.cs@108] 07/18/2026 21:55:19 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First init called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@49] 07/18/2026 21:55:20 INFO [SLS4All.Compact.ComponentModel.FirstRenderExecutor] [0] First render called for caller=SLS4All.Compact.Pages.MainLayout [FirstRenderExecutor.cs@58] 07/18/2026 21:55:27 INFO [SLS4All.Compact.Slicing.BitmapSliceProjectionHotspotCalculatorInitializer] [0] Background task has completed. Squares=100x100, MaxRadius=0.22265878 [BitmapSliceProjectionHotspotCalculatorInitializer.cs@175] 07/18/2026 21:56:13 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 21:56:13 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 21:56:45 DBUG [SLS4All.Compact.UpdateModel.ApplicationUpdate] [0] Checking for server application manifests at: https://compact.sls4all.com/ApplicationUpdate/list?DeploymentId=7cfca654-4abe-4606-9678-462e2c5d6429&MemberId=4MWKC-TBRP3-CQ7G2-MCFJC&Version={"Architecture"%3A"arm64"%2C"Platform"%3A"linux"%2C"VersionString"%3A"1.206.139.2317"%2C"Channel"%3A"stable"} [ApplicationUpdate.cs@146] 07/18/2026 21:56:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0265625 ~ 6 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:57:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0623452 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:58:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0707330 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 21:59:45 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0711369 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:00:46 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0605184 ~ 6.08 samples/sec, 2 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:01:20 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 22:01:20 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 22:01:22 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Aux data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.g__Throw|11_0() in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 134 at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateAuxData(Span`1 auxData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 172 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 111 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 22:01:22 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 22:02:09 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 22:02:10 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 22:03:10 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0720725 ~ 6.08 samples/sec, 5 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:03:22 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 22:03:22 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 22:04:22 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0667044 ~ 6.08 samples/sec, 6 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:04:35 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 22:04:35 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 22:05:35 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0682404 ~ 6.08 samples/sec, 7 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:06:03 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 22:06:04 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 22:07:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0601913 ~ 6.08 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:08:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0691344 ~ 6.08 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:09:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0657290 ~ 6.08 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:09:37 INFO [SLS4All.Compact.Nesting.ExhaustiveNester] [0] Nesting completed. WorkersStopwatch=00:00:00.1800407 (0.1800407). Stats=NestingStats { ZMax = 11.100000381469727, ChamberVolume = 246150.71875, SinteredVolume = 88429.798828125, Density = 0.35925062204647734 } [ExhaustiveNester.cs@1820] 07/18/2026 22:09:37 DBUG [SLS4All.Compact.Pages.CurrentJobAutomatic] [0] Nesting completed in 00:00:01.1697751 [CurrentJobAutomatic.razor.cs@103] 07/18/2026 22:09:38 DBUG [SLS4All.Compact.Pages.Jobs] [0] Saving job, changes detected. Job={"Name":"D638 Type 4 2026_07_18","CreatedAt":"2026-07-18T14:43:57.9860205+00:00","ObjectFiles":[{"Id":"58d868e7-1581-46fc-8943-995d2ad6922c","Name":"d638_type4_engraved.STL","Hash":"C91FB1B7ACE108CC7326BC223F910D714E123303"},{"Id":"87c88fd7-3a72-4d5e-bae3-64084616e21c","Name":"d638_type4_1.STL","Hash":"327FFA87C2C20423C74281733CCD6D9E8E66DC6A"},{"Id":"f28a27a2-5ebb-44d1-aa20-320883b8319b","Name":"d638_type4_2.STL","Hash":"2E0100E5C308672A2F7B3867C7A7FADC96D50B78"},{"Id":"702e28db-b688-4609-b62b-5fcbd656953d","Name":"d638_type4_3.STL","Hash":"8A1AE927CD847B6803C4DA3D1E620C591951B690"},{"Id":"723dc687-b48c-48ac-962c-f281875cc449","Name":"d638_type4_4.STL","Hash":"BB5E41B0F87F8A5A023280A0ED5CCFD0204EF057"},{"Id":"25cfb131-0787-4268-89f2-cf1c3412f21f","Name":"d638_type4_5.STL","Hash":"8A91AC9AE540ACC688CB32D01EDCF3A8E6BA9A08"},{"Id":"f787abcb-b526-47f6-85b9-1d6e84361d7d","Name":"d638_type4_6.STL","Hash":"08A05714928288984E99454B663113CA8110FB88"},{"Id":"fe7852e3-5dd9-425b-b373-32210e7b6dfc","Name":"d638_type4_7.STL","Hash":"1868F4B1D1DA48B340FCE7654A57B35D1B42156E"},{"Id":"333152ac-9432-4677-a0bb-702fadcdf3ad","Name":"d638_type4_8.STL","Hash":"DA4525F3030371FF2AFB6F570827FC6EDFA3D4A5"},{"Id":"d750f576-3e07-448e-aac0-5d94cda0f54b","Name":"d638_type4_9.STL","Hash":"1AF7650251C3819D1D4813381B6DD57E3A5A09C7"},{"Id":"50ec582d-9671-4062-9c22-01501ec10067","Name":"d638_type4_10.STL","Hash":"0307769CB999835DEB5C87505A70EBBDA544D76B"},{"Id":"61e7d2a0-6e8d-478c-a098-94750602503b","Name":"d638_type4_11.STL","Hash":"5CBAB415366845BD3EEC6FDF0B72BACCE3CD24AC"},{"Id":"a9a90584-0d9d-4637-8bbe-95f0f076b0b4","Name":"d638_type4_12.STL","Hash":"200BD20C8BBF505151E2FA74DB539F1B29303AE9"},{"Id":"2a42093d-97ca-4970-930f-8ffc06013043","Name":"d638_type4_13.STL","Hash":"7A40EC8048760E76593F4E7D7D61B203478BB07F"},{"Id":"25ea01e8-cc7f-4727-a17b-1aaa91f6ffa2","Name":"d638_type4_14.STL","Hash":"2EC308D9CF83412E23E852F5F1456113F6E310D4"}],"PrintProfile":{"Id":"3d6c3950-4535-427a-8c97-513e843574d7","IsEmpty":false},"NestingState":{"ChamberDepth":11.1,"ChamberVolume":246150.719,"SinteredVolume":88429.799,"AvailableDepth":200},"AvailableDepth":200,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"c0fc46d8-2e6c-4389-8710-07461ce33d6d"}. Original={"Name":"D638 Type 4 2026_07_18","CreatedAt":"2026-07-18T14:43:57.9860205+00:00","ObjectFiles":[{"Id":"58d868e7-1581-46fc-8943-995d2ad6922c","Name":"d638_type4_engraved.STL","Hash":"C91FB1B7ACE108CC7326BC223F910D714E123303"},{"Id":"87c88fd7-3a72-4d5e-bae3-64084616e21c","Name":"d638_type4_1.STL","Hash":"327FFA87C2C20423C74281733CCD6D9E8E66DC6A"},{"Id":"f28a27a2-5ebb-44d1-aa20-320883b8319b","Name":"d638_type4_2.STL","Hash":"2E0100E5C308672A2F7B3867C7A7FADC96D50B78"},{"Id":"702e28db-b688-4609-b62b-5fcbd656953d","Name":"d638_type4_3.STL","Hash":"8A1AE927CD847B6803C4DA3D1E620C591951B690"},{"Id":"723dc687-b48c-48ac-962c-f281875cc449","Name":"d638_type4_4.STL","Hash":"BB5E41B0F87F8A5A023280A0ED5CCFD0204EF057"},{"Id":"25cfb131-0787-4268-89f2-cf1c3412f21f","Name":"d638_type4_5.STL","Hash":"8A91AC9AE540ACC688CB32D01EDCF3A8E6BA9A08"},{"Id":"f787abcb-b526-47f6-85b9-1d6e84361d7d","Name":"d638_type4_6.STL","Hash":"08A05714928288984E99454B663113CA8110FB88"},{"Id":"fe7852e3-5dd9-425b-b373-32210e7b6dfc","Name":"d638_type4_7.STL","Hash":"1868F4B1D1DA48B340FCE7654A57B35D1B42156E"},{"Id":"333152ac-9432-4677-a0bb-702fadcdf3ad","Name":"d638_type4_8.STL","Hash":"DA4525F3030371FF2AFB6F570827FC6EDFA3D4A5"},{"Id":"d750f576-3e07-448e-aac0-5d94cda0f54b","Name":"d638_type4_9.STL","Hash":"1AF7650251C3819D1D4813381B6DD57E3A5A09C7"},{"Id":"50ec582d-9671-4062-9c22-01501ec10067","Name":"d638_type4_10.STL","Hash":"0307769CB999835DEB5C87505A70EBBDA544D76B"},{"Id":"61e7d2a0-6e8d-478c-a098-94750602503b","Name":"d638_type4_11.STL","Hash":"5CBAB415366845BD3EEC6FDF0B72BACCE3CD24AC"},{"Id":"a9a90584-0d9d-4637-8bbe-95f0f076b0b4","Name":"d638_type4_12.STL","Hash":"200BD20C8BBF505151E2FA74DB539F1B29303AE9"},{"Id":"2a42093d-97ca-4970-930f-8ffc06013043","Name":"d638_type4_13.STL","Hash":"7A40EC8048760E76593F4E7D7D61B203478BB07F"},{"Id":"25ea01e8-cc7f-4727-a17b-1aaa91f6ffa2","Name":"d638_type4_14.STL","Hash":"2EC308D9CF83412E23E852F5F1456113F6E310D4"}],"PrintProfile":{"Id":"3d6c3950-4535-427a-8c97-513e843574d7","IsEmpty":false},"NestingState":{"ChamberDepth":11.1,"ChamberVolume":246150.719,"SinteredVolume":88429.799,"AvailableDepth":200},"AvailableDepth":null,"Type":1,"NeedsLaser":true,"DryPrintEnabled":false,"PreviewEnabled":true,"CustomizeLayerTargetOrTuningEnabled":true,"BedPreparationAndCapEnabled":true,"ShowEjectToast":true,"Id":"c0fc46d8-2e6c-4389-8710-07461ce33d6d"} 07/18/2026 22:10:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 355 samples in 00:01:00.0122219 ~ 5.92 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2715312. SinceCollect=00:14:18.1607466. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1625, gen1=189, gen2=26, LatencyMode=Interactive, FreeMemory=6449217536, Live=266177472, HeapSizeBytes=267187960, FragmentedBytes=1324688, TotalCommittedBytes=270057472, PinnedObjectsCount=24, MemoryLoadBytes=2112651264, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis R by distance -520 [McuMovementClient.cs@545] 07/18/2026 22:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0127671. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:12 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 107767331891 (from now=107647331891, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 108134043496 (from now=108014043496, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 108134043496 (from now=108014043496, flags=None, requested=108134043496 (108134043496 @ 0) for mcu = 886.565832 [18/07/2026 21:09:41] (901.1170291333333 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:15 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 108134043496 (from now=108014043496, flags=None, requested=108134043496 (108134043496 @ 0) for mcu = 886.565832 [18/07/2026 21:09:41] (901.1170291333333 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1983556. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:04.3016815. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 108158043496 (108158043496 @ 0) for mcu = 886.765826 [18/07/2026 21:09:41] (901.3170291333333 sec) to 108281292612 (from now=108161292612, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:05.5615613. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:05.5739601. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z1 by distance -210000 [McuMovementClient.cs@545] 07/18/2026 22:10:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:05.5856934. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 108158043496 (108158043496 @ 0) for mcu = 886.765791 [18/07/2026 21:09:41] (901.3170291333333 sec) to 108435601730 (from now=108315601730, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 108558865355 (from now=108438865355, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 108158043496 (108158043496 @ 0) for mcu = 886.765810 [18/07/2026 21:09:41] (901.3170291333333 sec) to 108558865355 (from external timestamp, flags=None, requested=108558865355 (108558865355 @ 0) for mcu = 890.106037 [18/07/2026 21:09:45] (904.6572112916666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:10:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from empty to 108558865355 (from now=108438865355, flags=None, requested=108558865355 (108558865355 @ 0) for mcu = 890.106037 [18/07/2026 21:09:45] (904.6572112916666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6610686. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:08.3089748. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 108638865355 (108638865355 @ 0) for mcu = 890.772701 [18/07/2026 21:09:45] (905.3238779583334 sec) to 108762002337 (from now=108642002337, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.1263697. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.1418360. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Homing axis Z2 by distance -210000 [McuMovementClient.cs@545] 07/18/2026 22:10:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:10.1524044. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 108638865355 (108638865355 @ 0) for mcu = 890.772736 [18/07/2026 21:09:45] (905.3238779583334 sec) to 108983293397 (from now=108863293397, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from empty to 109106353941 (from now=108986353941, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 109106353941 (from now=108986353941, flags=None, requested=109106353941 (109106353941 @ 0) for mcu = 894.668512 [18/07/2026 21:09:49] (909.219616175 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 108638865355 (108638865355 @ 0) for mcu = 890.772721 [18/07/2026 21:09:45] (905.3238779583334 sec) to 109106353941 (from external timestamp, flags=None, requested=109106353941 (109106353941 @ 0) for mcu = 894.668512 [18/07/2026 21:09:49] (909.219616175 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:10:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.6638879. Loops = 7. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:12.8710346. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 109186353941 (109186353941 @ 0) for mcu = 895.335205 [18/07/2026 21:09:50] (909.8862828416667 sec) to 109309459945 (from now=109189459945, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:14.5777688. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 109186353941 (109186353941 @ 0) for mcu = 895.335204 [18/07/2026 21:09:50] (909.8862828416667 sec) to 110020133810 (from now=109900133810, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from empty to 110020133810 (from now=109900133810, flags=None, requested=110020133810 (110020133810 @ 0) for mcu = 902.283465 [18/07/2026 21:09:57] (916.8344484166666 sec), advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 109186353941 (109186353941 @ 0) for mcu = 895.335204 [18/07/2026 21:09:50] (909.8862828416667 sec) to 110020133810 (from external timestamp, flags=None, requested=110020133810 (110020133810 @ 0) for mcu = 902.283465 [18/07/2026 21:09:57] (916.8344484166666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:10:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:07.7500000. Loops = 31. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:26.6222668. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 110837731310 (110837731310 @ 0) for mcu = 909.096841 [18/07/2026 21:10:04] (923.6477609166667 sec) to 110958060001 (from now=110838060001, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:10:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 110837731310 (110837731310 @ 0) for mcu = 909.096841 [18/07/2026 21:10:04] (923.6477609166667 sec) to 110958060001 (from external timestamp, flags=None, requested=110958060001 (110958060001 @ 0) for mcu = 910.099593 [18/07/2026 21:10:05] (924.6505000083333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:10:39 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 110837731310 (110837731310 @ 0) for mcu = 909.096841 [18/07/2026 21:10:04] (923.6477609166667 sec) to 110958060001 (from external timestamp, flags=None, requested=110958060001 (110958060001 @ 0) for mcu = 910.099593 [18/07/2026 21:10:05] (924.6505000083333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:10:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:10:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.1404263. Loops = 5. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:27.7723068. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:10:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/18/2026 22:10:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/18/2026 22:10:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 22:10:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/18/2026 22:10:45 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/18/2026 22:10:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 22:11:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1553077 ~ 6.02 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:12:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 365 samples in 00:01:00.0862690 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:12:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Starting [LayerClient.cs@629] 07/18/2026 22:12:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:12:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:12:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.7312586. SinceCollect=00:02:24.5301182. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:12:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1822, gen1=207, gen2=29, LatencyMode=Interactive, FreeMemory=6575243264, Live=264548000, HeapSizeBytes=264889536, FragmentedBytes=1015048, TotalCommittedBytes=265109504, PinnedObjectsCount=24, MemoryLoadBytes=1943639162, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:12:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 110974860001 (110974860001 @ 0) for mcu = 910.239545 [18/07/2026 21:10:05] (924.7905000083333 sec) to 125107447032 (from now=124987447032, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:12:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 110974860001 (110974860001 @ 0) for mcu = 910.239545 [18/07/2026 21:10:05] (924.7905000083333 sec) to 125107447032 (from external timestamp, flags=None, requested=125107447032 (125107447032 @ 0) for mcu = 1028.012493 [18/07/2026 21:12:02] (1042.5620586 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:12:37 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 110974860001 (110974860001 @ 0) for mcu = 910.239545 [18/07/2026 21:10:05] (924.7905000083333 sec) to 125107447032 (from external timestamp, flags=None, requested=125107447032 (125107447032 @ 0) for mcu = 1028.012493 [18/07/2026 21:12:02] (1042.5620586 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:12:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:12:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7394346. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:09.8308367. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:12:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 126165086838 (126165086838 @ 0) for mcu = 1036.826204 [18/07/2026 21:12:11] (1051.37572365 sec) to 126286545520 (from now=126166545520, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:12:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 126165086838 (126165086838 @ 0) for mcu = 1036.826204 [18/07/2026 21:12:11] (1051.37572365 sec) to 126286545520 (from external timestamp, flags=None, requested=126286545520 (126286545520 @ 0) for mcu = 1037.838371 [18/07/2026 21:12:12] (1052.3878793333333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:12:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 126165086838 (126165086838 @ 0) for mcu = 1036.826204 [18/07/2026 21:12:11] (1051.37572365 sec) to 126286545520 (from external timestamp, flags=None, requested=126286545520 (126286545520 @ 0) for mcu = 1037.838371 [18/07/2026 21:12:12] (1052.3878793333333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:12:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:12:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7320876. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.6418556. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:12:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 127342585326 (127342585326 @ 0) for mcu = 1046.638784 [18/07/2026 21:12:21] (1061.18821105 sec) to 127464212940 (from now=127344212940, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:12:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 127342585326 (127342585326 @ 0) for mcu = 1046.638784 [18/07/2026 21:12:21] (1061.18821105 sec) to 127464212940 (from external timestamp, flags=None, requested=127464212940 (127464212940 @ 0) for mcu = 1047.652358 [18/07/2026 21:12:22] (1062.2017745 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:12:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 127342585326 (127342585326 @ 0) for mcu = 1046.638784 [18/07/2026 21:12:21] (1061.18821105 sec) to 127464212940 (from external timestamp, flags=None, requested=127464212940 (127464212940 @ 0) for mcu = 1047.652358 [18/07/2026 21:12:22] (1062.2017745 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:12:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:13:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 362 samples in 00:01:00.1139414 ~ 6.02 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:13:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7264188. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.4586054. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:13:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 128520252746 (128520252746 @ 0) for mcu = 1056.452789 [18/07/2026 21:12:31] (1071.0021062166666 sec) to 128641878076 (from now=128521878076, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:13:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 128520252746 (128520252746 @ 0) for mcu = 1056.452789 [18/07/2026 21:12:31] (1071.0021062166666 sec) to 128641878076 (from external timestamp, flags=None, requested=128641878076 (128641878076 @ 0) for mcu = 1057.466344 [18/07/2026 21:12:32] (1072.0156506333333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:13:06 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 128520252746 (128520252746 @ 0) for mcu = 1056.452789 [18/07/2026 21:12:31] (1071.0021062166666 sec) to 128641878076 (from external timestamp, flags=None, requested=128641878076 (128641878076 @ 0) for mcu = 1057.466344 [18/07/2026 21:12:32] (1072.0156506333333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:13:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:13:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7272533. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:39.2719896. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:13:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 129697917882 (129697917882 @ 0) for mcu = 1066.266774 [18/07/2026 21:12:41] (1080.81598235 sec) to 129819484171 (from now=129699484171, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:13:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 129697917882 (129697917882 @ 0) for mcu = 1066.266774 [18/07/2026 21:12:41] (1080.81598235 sec) to 129819484171 (from external timestamp, flags=None, requested=129819484171 (129819484171 @ 0) for mcu = 1067.279838 [18/07/2026 21:12:42] (1081.8290347583334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:13:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 129697917882 (129697917882 @ 0) for mcu = 1066.266774 [18/07/2026 21:12:41] (1080.81598235 sec) to 129819484171 (from external timestamp, flags=None, requested=129819484171 (129819484171 @ 0) for mcu = 1067.279838 [18/07/2026 21:12:42] (1081.8290347583334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:13:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:13:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:09.7295061. Loops = 39. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.0864833. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:13:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BedLeveling: Completed [LayerClient.cs@681] 07/18/2026 22:13:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Starting [LayerClient.cs@689] 07/18/2026 22:13:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:13:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:58.4597838. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:13:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 130875523977 (130875523977 @ 0) for mcu = 1076.080249 [18/07/2026 21:12:51] (1090.629366475 sec) to 132122008640 (from now=132002008640, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:13:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 130875523977 (130875523977 @ 0) for mcu = 1076.080249 [18/07/2026 21:12:51] (1090.629366475 sec) to 132122008640 (from external timestamp, flags=None, requested=132122008640 (132122008640 @ 0) for mcu = 1086.467731 [18/07/2026 21:13:01] (1101.0167386666667 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:13:35 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 130875523977 (130875523977 @ 0) for mcu = 1076.080249 [18/07/2026 21:12:51] (1090.629366475 sec) to 132122008640 (from external timestamp, flags=None, requested=132122008640 (132122008640 @ 0) for mcu = 1086.467731 [18/07/2026 21:13:01] (1101.0167386666667 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:13:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:13:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:01.4607876. Loops = 6. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:59.9346685. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:13:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] FinishBedLeveling: Completed [LayerClient.cs@700] 07/18/2026 22:14:04 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 364 samples in 00:01:00.0107595 ~ 6.07 samples/sec, 8 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:14:05 FAIL [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Exception while reading camera data [Mlx90640Camera.cs@335] System.IO.InvalidDataException: Frame data invalid at SLS4All.Compact.Temperature.Mlx90640Camera.ValidateFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 125 at SLS4All.Compact.Temperature.Mlx90640Camera.MLX90640_TryGetFrameData(Span`1 frameData) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.Api.cs:line 115 at SLS4All.Compact.Temperature.Mlx90640Camera.TrySample(Mlx90640CameraOptions options, Span`1 pixels) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 385 at SLS4All.Compact.Temperature.Mlx90640Camera.ExecuteTaskAsync(CancellationToken cancel) in /azp/_work/1/s/SLS4All.Compact.Platform/Temperature/Mlx90640Camera.cs:line 250 07/18/2026 22:14:05 INFO [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Initialized with warn=0, starting read loop [Mlx90640Camera.cs@238] 07/18/2026 22:14:29 INFO [SLS4All.Compact.Helpers.RemainingPrintTimeStylesGenerator] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 22:14:34 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 22:14:41 INFO [SLS4All.Compact.ComponentModel.ToastMessage] [0] Starting job: Job has been started! [UIToastProvider.cs@98] 07/18/2026 22:14:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:14:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.9164510. SinceCollect=00:02:06.1941612. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=1992, gen1=223, gen2=34, LatencyMode=Interactive, FreeMemory=6163726336, Live=255159752, HeapSizeBytes=254383576, FragmentedBytes=732896, TotalCommittedBytes=254623744, PinnedObjectsCount=24, MemoryLoadBytes=2366169415, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:14:43 INFO [SLS4All.Compact.Printing.PrintingService] [0] Starting soft heater, with analysis filename '/surface/analysis_2025-10-21_00-57-47.s4a-sha' and HalogenMaxPercent=100 [PrintingService.cs@1732] 07/18/2026 22:14:43 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Loading profile PrinterPath { IsSystemPath = False, PathUnsafe = /surface/analysis_2025-10-21_00-57-47.s4a-sha, PathSafe = /surface/analysis_2025-10-21_00-57-47.s4a-sha } [SoftAnalysisSurfaceHeater.cs@668] 07/18/2026 22:14:43 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 0, start=0, count=110, Z=0.001 [PrintingService.cs@1518] 07/18/2026 22:14:43 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Loaded prepared data from /home/SLS4All/.PrivateData/SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater/analysis_2025-10-21_00-57-47.0DF7023A24F0264E1569792DD4916C75BEE131F0.prepared.json [SoftAnalysisSurfaceHeater.cs@413] 07/18/2026 22:14:43 INFO [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Starting heater [SoftAnalysisSurfaceHeater.cs@733] 07/18/2026 22:14:43 INFO [SLS4All.Compact.Printing.PrintingService] [0] Begin heating (soft heater running = True) [PrintingService.cs@2490] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=39.844818115234375, Elapsed=00:00:00 [ControlledHeating.cs@486] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 0, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.056418720096543E-05, Elapsed = 00:00:00.0086444, TimeTotal = 05:55:10.4232982, Remaining = 05:55:10.4146538, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:15:38.7109448, WeightTotalEstimate = 01:15:38.7109448, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:44:55.4146538, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:00.0086444, HeatingEstimate = 01:10:00, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:49:30.5640758, WeightEstimate = 01:15:38.7109448 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:09:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: Progress;StartedAtUtc;Elapsed;TimeTotal;Remaining;Incomplete;SoftCount;LayerPrintDone;WeightsDone;WeightDone;WeightTotal;WeightTotalEstimate;LayerRecoatElapsed;LayerRecoatDelays;LayerRecoatPrintLayersElapsed;LayerRecoatNoDelayAverage;StreamingElapsed;ObjectLayerOverheadAverageDuration;TimeLayers;CoolingElapsed;CoolingEstimate;HeatingElapsed;HeatingEstimate;HeatingEstimate2;HeatingEstimate3;CoolingFrom;BedPreparationElapsed;BedPreparationTotal;PrintCapElapsed;PrintCapTotal;JobElapsed;JobTotal [PrintingService.cs@1916] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.056418720096543E-05;StartedAtUtc;00:00:00.0086444;05:55:10.4232982;05:55:10.4146538;False;110;0;0;00:00:00;01:15:38.7109448;01:15:38.7109448;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:44:55.4146538;00:00:00;02:00:00;00:00:00.0086444;01:10:00;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:49:30.5640758 [PrintingService.cs@1918] 07/18/2026 22:14:43 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Heat-up surface target 20 reached, setting surface run to 168 and after 00:45:00 to 176 [ControlledHeating.cs@566] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=26.285714285714285,powderChamber1=26.285714285714285,powderChamber2=26.285714285714285,powderChamber3=26.285714285714285,powderChamber4=26.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=39.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=26.285714285714285,printChamber1=26.285714285714285,printChamber2=26.285714285714285,printChamber3=26.285714285714285,printChamber4=26.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 308, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 39.90468072891235. Used = 39.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:14:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:14:45 INFO [SLS4All.Compact.Controllers.BedMatrixController] [0] Stopping generator [LazyDataGenerator.cs@93] 07/18/2026 22:14:45 DBUG [SLS4All.Compact.Controllers.BedMatrixController] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/18/2026 22:14:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 26.285715 with temperature 25.25 [HeaterCheck.cs@67] 07/18/2026 22:14:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 26.285715 with temperature 23 [HeaterCheck.cs@67] 07/18/2026 22:14:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 26.285715 with temperature 26.5 [HeaterCheck.cs@67] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 41.893882751464844 after 00:00:00 [ControlledHeating.cs@493] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.1515883. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631423. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.2197408. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:03.2443275. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:14:46 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 132177457367 (132177457367 @ 0) for mcu = 1086.929798 [18/07/2026 21:13:01] (1101.4788113916666 sec) to 140640255595 (from now=140520255595, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 132177457367 (132177457367 @ 0) for mcu = 1086.929798 [18/07/2026 21:13:01] (1101.4788113916666 sec) to 140640255595 (from external timestamp, flags=None, requested=140640255595 (140640255595 @ 0) for mcu = 1157.453851 [18/07/2026 21:14:12] (1172.0021299583334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 132177457367 (132177457367 @ 0) for mcu = 1086.929798 [18/07/2026 21:13:01] (1101.4788113916666 sec) to 140640255595 (from external timestamp, flags=None, requested=140640255595 (140640255595 @ 0) for mcu = 1157.453851 [18/07/2026 21:14:12] (1172.0021299583334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:14:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:14:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=27.285714285714285,powderChamber1=27.285714285714285,powderChamber2=27.285714285714285,powderChamber3=27.285714285714285,powderChamber4=27.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:14:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=40.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:14:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 6.0290236, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.028378121471682047, Elapsed = 00:00:06.0475006, TimeTotal = 05:55:10.4331308, Remaining = 05:55:04.3856302, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:15:38.7109448, WeightTotalEstimate = 01:15:38.7109448, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:44:55.4146538, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:06.0475006, HeatingEstimate = 01:09:53.9709764, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:49:30.5640758, WeightEstimate = 01:15:38.7109448 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:09:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:14:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.028378121471682047;StartedAtUtc;00:00:06.0475006;05:55:10.4331308;05:55:04.3856302;False;110;0;0;00:00:00;01:15:38.7109448;01:15:38.7109448;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:44:55.4146538;00:00:00;02:00:00;00:00:06.0475006;01:09:53.9709764;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:49:30.5640758 [PrintingService.cs@1918] 07/18/2026 22:14:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=27.285714285714285,printChamber1=27.285714285714285,printChamber2=27.285714285714285,printChamber3=27.285714285714285,printChamber4=27.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:14:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 40.90468072891235. Used = 40.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:14:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=28.285714285714285,powderChamber1=28.285714285714285,powderChamber2=28.285714285714285,powderChamber3=28.285714285714285,powderChamber4=28.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:14:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=41.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:14:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 41.90468072891235. Used = 41.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:14:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 12.0390629, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.056579575516011525, Elapsed = 00:00:12.0573525, TimeTotal = 05:55:10.4329434, Remaining = 05:54:58.3755909, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:15:38.7109448, WeightTotalEstimate = 01:15:38.7109448, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:44:55.4146538, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:12.0573525, HeatingEstimate = 01:09:47.9609371, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:49:30.5640758, WeightEstimate = 01:15:38.7109448 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:09:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:14:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.056579575516011525;StartedAtUtc;00:00:12.0573525;05:55:10.4329434;05:54:58.3755909;False;110;0;0;00:00:00;01:15:38.7109448;01:15:38.7109448;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:44:55.4146538;00:00:00;02:00:00;00:00:12.0573525;01:09:47.9609371;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:49:30.5640758 [PrintingService.cs@1918] 07/18/2026 22:14:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=28.285714285714285,printChamber1=28.285714285714285,printChamber2=28.285714285714285,printChamber3=28.285714285714285,printChamber4=28.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:14:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9890561. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:14.3609882. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:14:57 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:14:57 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:14:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 28.285715 with temperature 27 [HeaterCheck.cs@67] 07/18/2026 22:14:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 28.285715 with temperature 26.75 [HeaterCheck.cs@67] 07/18/2026 22:15:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=29.285714285714285,powderChamber1=29.285714285714285,powderChamber2=29.285714285714285,powderChamber3=29.285714285714285,powderChamber4=29.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=42.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:15:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 42.90468072891235. Used = 42.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:15:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 18.0435479, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.0847557099021938, Elapsed = 00:00:18.0618087, TimeTotal = 05:55:10.4329146, Remaining = 05:54:52.3711059, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:15:38.7109448, WeightTotalEstimate = 01:15:38.7109448, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:44:55.4146538, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:18.0618087, HeatingEstimate = 01:09:41.9564521, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:49:30.5640758, WeightEstimate = 01:15:38.7109448 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:09:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:15:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.0847557099021938;StartedAtUtc;00:00:18.0618087;05:55:10.4329146;05:54:52.3711059;False;110;0;0;00:00:00;01:15:38.7109448;01:15:38.7109448;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:44:55.4146538;00:00:00;02:00:00;00:00:18.0618087;01:09:41.9564521;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:49:30.5640758 [PrintingService.cs@1918] 07/18/2026 22:15:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=29.285714285714285,printChamber1=29.285714285714285,printChamber2=29.285714285714285,printChamber3=29.285714285714285,printChamber4=29.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 29.285715 with temperature 26 [HeaterCheck.cs@67] 07/18/2026 22:15:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 29.285715 with temperature 27 [HeaterCheck.cs@67] 07/18/2026 22:15:05 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 352 samples in 00:01:00.0098015 ~ 5.87 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:15:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 29.285715 with temperature 28.25 [HeaterCheck.cs@67] 07/18/2026 22:15:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 29.285715 with temperature 27 [HeaterCheck.cs@67] 07/18/2026 22:15:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=43.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:15:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=30.285714285714285,powderChamber1=30.285714285714285,powderChamber2=30.285714285714285,powderChamber3=30.285714285714285,powderChamber4=30.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 43.90468072891235. Used = 43.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:15:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 24.0456561, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.11292079379253295, Elapsed = 00:00:24.0639100, TimeTotal = 05:55:10.4329077, Remaining = 05:54:46.3689977, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:15:38.7109448, WeightTotalEstimate = 01:15:38.7109448, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:44:55.4146538, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:24.0639100, HeatingEstimate = 01:09:35.9543439, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:49:30.5640758, WeightEstimate = 01:15:38.7109448 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:09:53. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:15:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.11292079379253295;StartedAtUtc;00:00:24.0639100;05:55:10.4329077;05:54:46.3689977;False;110;0;0;00:00:00;01:15:38.7109448;01:15:38.7109448;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:44:55.4146538;00:00:00;02:00:00;00:00:24.0639100;01:09:35.9543439;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:49:30.5640758 [PrintingService.cs@1918] 07/18/2026 22:15:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=30.285714285714285,printChamber1=30.285714285714285,printChamber2=30.285714285714285,printChamber3=30.285714285714285,printChamber4=30.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] approaching new target of 30.285715 with temperature 25 [HeaterCheck.cs@88] 07/18/2026 22:15:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 30.285715 with temperature 26.75 [HeaterCheck.cs@67] 07/18/2026 22:15:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 30.285715 with temperature 27 [HeaterCheck.cs@67] 07/18/2026 22:15:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 30.285715 with temperature 26 [HeaterCheck.cs@67] 07/18/2026 22:15:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218848, estimate=67.26939172888979 for layer 0, Z=0.001 [PrintingService.cs@1524] 07/18/2026 22:15:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 30.285715 with temperature 31.75 [HeaterCheck.cs@67] 07/18/2026 22:15:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 0, island count 7 [PrintingService.cs@1569] 07/18/2026 22:15:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 30.285715 with temperature 28.5 [HeaterCheck.cs@67] 07/18/2026 22:15:09 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 1, start=0, count=110, Z=0.101 [PrintingService.cs@1518] 07/18/2026 22:15:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 564, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:15:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 30.285715 with temperature 26.5 [HeaterCheck.cs@67] 07/18/2026 22:15:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=44.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:15:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=31.285714285714285,powderChamber1=31.285714285714285,powderChamber2=31.285714285714285,powderChamber3=31.285714285714285,powderChamber4=31.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 44.90468072891235. Used = 44.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:15:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 30.0502732, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.14083475302884696, Elapsed = 00:00:30.0685308, TimeTotal = 05:55:50.2208463, Remaining = 05:55:20.1523155, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:16:18.4988797, WeightTotalEstimate = 01:16:18.4988797, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:45:35.2025887, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:30.0685308, HeatingEstimate = 01:09:29.9497268, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:50:10.3520107, WeightEstimate = 01:16:18.4988797 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:10:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:15:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.14083475302884696;StartedAtUtc;00:00:30.0685308;05:55:50.2208463;05:55:20.1523155;False;110;0;0;00:00:00;01:16:18.4988797;01:16:18.4988797;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:45:35.2025887;00:00:00;02:00:00;00:00:30.0685308;01:09:29.9497268;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:50:10.3520107 [PrintingService.cs@1918] 07/18/2026 22:15:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=31.285714285714285,printChamber1=31.285714285714285,printChamber2=31.285714285714285,printChamber3=31.285714285714285,printChamber4=31.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=44.57866668701172, Elapsed=00:00:27.2313905 [ControlledHeating.cs@486] 07/18/2026 22:15:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.285715 with temperature 26.5 [HeaterCheck.cs@67] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 31.285715 with temperature 26.5 [HeaterCheck.cs@67] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 45.59623718261719 after 00:00:30.2363627 [ControlledHeating.cs@493] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:33.3884190. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629887. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:33.4517303. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:33.4651550. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:15:16 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 141851776823 (141851776823 @ 0) for mcu = 1167.549961 [18/07/2026 21:14:22] (1182.0981401916667 sec) to 144266051831 (from now=144146051831, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 141851776823 (141851776823 @ 0) for mcu = 1167.549961 [18/07/2026 21:14:22] (1182.0981401916667 sec) to 144266051831 (from external timestamp, flags=None, requested=144266051831 (144266051831 @ 0) for mcu = 1187.669131 [18/07/2026 21:14:42] (1202.2170985916666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 141851776823 (141851776823 @ 0) for mcu = 1167.549961 [18/07/2026 21:14:22] (1182.0981401916667 sec) to 144266051831 (from external timestamp, flags=None, requested=144266051831 (144266051831 @ 0) for mcu = 1187.669131 [18/07/2026 21:14:42] (1202.2170985916666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:15:16 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:15:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 31.285715 with temperature 26.5 [HeaterCheck.cs@67] 07/18/2026 22:15:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.285715 with temperature 26.5 [HeaterCheck.cs@67] 07/18/2026 22:15:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 31.285715 with temperature 28 [HeaterCheck.cs@67] 07/18/2026 22:15:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 31.285715 with temperature 29 [HeaterCheck.cs@67] 07/18/2026 22:15:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 31.285715 with temperature 29.25 [HeaterCheck.cs@67] 07/18/2026 22:15:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=45.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:15:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=32.285714285714285,powderChamber1=32.285714285714285,powderChamber2=32.285714285714285,powderChamber3=32.285714285714285,powderChamber4=32.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 45.90468072891235. Used = 45.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:15:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 36.0622672, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.16899412984386705, Elapsed = 00:00:36.0806201, TimeTotal = 05:55:50.2209416, Remaining = 05:55:14.1403215, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:16:18.4988797, WeightTotalEstimate = 01:16:18.4988797, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:45:35.2025887, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:36.0806201, HeatingEstimate = 01:09:23.9377328, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:50:10.3520107, WeightEstimate = 01:16:18.4988797 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:10:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:15:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.16899412984386705;StartedAtUtc;00:00:36.0806201;05:55:50.2209416;05:55:14.1403215;False;110;0;0;00:00:00;01:16:18.4988797;01:16:18.4988797;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:45:35.2025887;00:00:00;02:00:00;00:00:36.0806201;01:09:23.9377328;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:50:10.3520107 [PrintingService.cs@1918] 07/18/2026 22:15:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=32.285714285714285,printChamber1=32.285714285714285,printChamber2=32.285714285714285,printChamber3=32.285714285714285,printChamber4=32.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 32.285713 with temperature 27 [HeaterCheck.cs@88] 07/18/2026 22:15:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 32.285713 with temperature 28 [HeaterCheck.cs@67] 07/18/2026 22:15:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 32.285713 with temperature 28 [HeaterCheck.cs@67] 07/18/2026 22:15:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 32.285713 with temperature 28.5 [HeaterCheck.cs@67] 07/18/2026 22:15:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 32.285713 with temperature 30.75 [HeaterCheck.cs@67] 07/18/2026 22:15:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 32.285713 with temperature 28.5 [HeaterCheck.cs@67] 07/18/2026 22:15:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 32.285713 with temperature 28.5 [HeaterCheck.cs@67] 07/18/2026 22:15:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 32.285713 with temperature 27.75 [HeaterCheck.cs@67] 07/18/2026 22:15:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 32.285713 with temperature 27.75 [HeaterCheck.cs@67] 07/18/2026 22:15:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 32.285713 with temperature 29 [HeaterCheck.cs@67] 07/18/2026 22:15:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 32.285713 with temperature 29.5 [HeaterCheck.cs@67] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 32.285713 with temperature 28.25 [HeaterCheck.cs@67] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=46.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 32.285713 with temperature 28.25 [HeaterCheck.cs@67] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=33.285714285714285,powderChamber1=33.285714285714285,powderChamber2=33.285714285714285,powderChamber3=33.285714285714285,powderChamber4=33.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 46.90468072891235. Used = 46.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] approaching new target of 33.285713 with temperature 26.75 [HeaterCheck.cs@88] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 42.0633511, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.19710151526182293, Elapsed = 00:00:42.0816088, TimeTotal = 05:55:50.2208464, Remaining = 05:55:08.1392376, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:16:18.4988797, WeightTotalEstimate = 01:16:18.4988797, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:45:35.2025887, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:42.0816088, HeatingEstimate = 01:09:17.9366489, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:50:10.3520107, WeightEstimate = 01:16:18.4988797 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:10:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.19710151526182293;StartedAtUtc;00:00:42.0816088;05:55:50.2208464;05:55:08.1392376;False;110;0;0;00:00:00;01:16:18.4988797;01:16:18.4988797;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:45:35.2025887;00:00:00;02:00:00;00:00:42.0816088;01:09:17.9366489;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:50:10.3520107 [PrintingService.cs@1918] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=33.285714285714285,printChamber1=33.285714285714285,printChamber2=33.285714285714285,printChamber3=33.285714285714285,printChamber4=33.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] approaching new target of 33.285713 with temperature 28.25 [HeaterCheck.cs@88] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 33.285713 with temperature 28.25 [HeaterCheck.cs@88] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] approaching new target of 33.285713 with temperature 28.25 [HeaterCheck.cs@88] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 33.285713 with temperature 29 [HeaterCheck.cs@67] 07/18/2026 22:15:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 33.285713 with temperature 28.5 [HeaterCheck.cs@67] 07/18/2026 22:15:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 33.285713 with temperature 28.5 [HeaterCheck.cs@67] 07/18/2026 22:15:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 33.285713 with temperature 29 [HeaterCheck.cs@67] 07/18/2026 22:15:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 33.285713 with temperature 32 [HeaterCheck.cs@67] 07/18/2026 22:15:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 33.285713 with temperature 28.75 [HeaterCheck.cs@67] 07/18/2026 22:15:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:44.5716879. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:15:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:15:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:15:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 33.285713 with temperature 29 [HeaterCheck.cs@67] 07/18/2026 22:15:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 33.285713 with temperature 29 [HeaterCheck.cs@67] 07/18/2026 22:15:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 33.285713 with temperature 28.5 [HeaterCheck.cs@67] 07/18/2026 22:15:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 33.285713 with temperature 28.5 [HeaterCheck.cs@67] 07/18/2026 22:15:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 33.285713 with temperature 29 [HeaterCheck.cs@67] 07/18/2026 22:15:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 33.285713 with temperature 29.25 [HeaterCheck.cs@67] 07/18/2026 22:15:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 33.285713 with temperature 28.75 [HeaterCheck.cs@67] 07/18/2026 22:15:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 33.285713 with temperature 28.5 [HeaterCheck.cs@67] 07/18/2026 22:15:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 33.285713 with temperature 28.75 [HeaterCheck.cs@67] 07/18/2026 22:15:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 33.285713 with temperature 28.75 [HeaterCheck.cs@67] 07/18/2026 22:15:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=47.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:15:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=34.285714285714285,powderChamber1=34.285714285714285,powderChamber2=34.285714285714285,powderChamber3=34.285714285714285,powderChamber4=34.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 47.90468072891235. Used = 47.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:15:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] approaching new target of 34.285713 with temperature 27.75 [HeaterCheck.cs@88] 07/18/2026 22:15:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 48.0689113, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.225230285712577, Elapsed = 00:00:48.0871634, TimeTotal = 05:55:50.2208408, Remaining = 05:55:02.1336774, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:16:18.4988797, WeightTotalEstimate = 01:16:18.4988797, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:45:35.2025887, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:48.0871634, HeatingEstimate = 01:09:11.9310887, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:50:10.3520107, WeightEstimate = 01:16:18.4988797 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:10:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:15:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.225230285712577;StartedAtUtc;00:00:48.0871634;05:55:50.2208408;05:55:02.1336774;False;110;0;0;00:00:00;01:16:18.4988797;01:16:18.4988797;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:45:35.2025887;00:00:00;02:00:00;00:00:48.0871634;01:09:11.9310887;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:50:10.3520107 [PrintingService.cs@1918] 07/18/2026 22:15:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=34.285714285714285,printChamber1=34.285714285714285,printChamber2=34.285714285714285,printChamber3=34.285714285714285,printChamber4=34.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 34.285713 with temperature 29.25 [HeaterCheck.cs@88] 07/18/2026 22:15:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] approaching new target of 34.285713 with temperature 29.25 [HeaterCheck.cs@88] 07/18/2026 22:15:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 34.285713 with temperature 30.25 [HeaterCheck.cs@67] 07/18/2026 22:15:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 34.285713 with temperature 29.75 [HeaterCheck.cs@67] 07/18/2026 22:15:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 34.285713 with temperature 29.5 [HeaterCheck.cs@67] 07/18/2026 22:15:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 34.285713 with temperature 29.5 [HeaterCheck.cs@67] 07/18/2026 22:15:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 34.285713 with temperature 30.5 [HeaterCheck.cs@67] 07/18/2026 22:15:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 34.285713 with temperature 30.25 [HeaterCheck.cs@67] 07/18/2026 22:15:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 34.285713 with temperature 31.5 [HeaterCheck.cs@67] 07/18/2026 22:15:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 34.285713 with temperature 31.75 [HeaterCheck.cs@67] 07/18/2026 22:15:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 34.285713 with temperature 30.5 [HeaterCheck.cs@67] 07/18/2026 22:15:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 34.285713 with temperature 29.5 [HeaterCheck.cs@67] 07/18/2026 22:15:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 34.285713 with temperature 29.75 [HeaterCheck.cs@67] 07/18/2026 22:15:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 34.285713 with temperature 30.25 [HeaterCheck.cs@67] 07/18/2026 22:15:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=48.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:15:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=35.285714285714285,powderChamber1=35.285714285714285,powderChamber2=35.285714285714285,powderChamber3=35.285714285714285,powderChamber4=35.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 48.90468072891235. Used = 48.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:15:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 54.0700452, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.25333840746851033, Elapsed = 00:00:54.0883095, TimeTotal = 05:55:50.2208530, Remaining = 05:54:56.1325435, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:16:18.4988797, WeightTotalEstimate = 01:16:18.4988797, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:45:35.2025887, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:00:54.0883095, HeatingEstimate = 01:09:05.9299548, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:50:10.3520107, WeightEstimate = 01:16:18.4988797 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:10:33. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:15:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.25333840746851033;StartedAtUtc;00:00:54.0883095;05:55:50.2208530;05:54:56.1325435;False;110;0;0;00:00:00;01:16:18.4988797;01:16:18.4988797;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:45:35.2025887;00:00:00;02:00:00;00:00:54.0883095;01:09:05.9299548;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:50:10.3520107 [PrintingService.cs@1918] 07/18/2026 22:15:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=35.285714285714285,printChamber1=35.285714285714285,printChamber2=35.285714285714285,printChamber3=35.285714285714285,printChamber4=35.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 35.285713 with temperature 30.25 [HeaterCheck.cs@88] 07/18/2026 22:15:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 35.285713 with temperature 30.5 [HeaterCheck.cs@67] 07/18/2026 22:15:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284031, estimate=76.1384110441237 for layer 1, Z=0.101 [PrintingService.cs@1524] 07/18/2026 22:15:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 1, island count 7 [PrintingService.cs@1569] 07/18/2026 22:15:39 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 2, start=0, count=110, Z=0.201 [PrintingService.cs@1518] 07/18/2026 22:15:39 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:15:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 35.285713 with temperature 30.5 [HeaterCheck.cs@67] 07/18/2026 22:15:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 35.285713 with temperature 30.75 [HeaterCheck.cs@67] 07/18/2026 22:15:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 35.285713 with temperature 32.25 [HeaterCheck.cs@67] 07/18/2026 22:15:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 35.285713 with temperature 35.25 [HeaterCheck.cs@67] 07/18/2026 22:15:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 35.285713 with temperature 30.75 [HeaterCheck.cs@67] 07/18/2026 22:15:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=49.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:15:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=36.285714285714285,powderChamber1=36.285714285714285,powderChamber2=36.285714285714285,powderChamber3=36.285714285714285,powderChamber4=36.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 49.90468072891235. Used = 49.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:15:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 60.0761731, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.28152367769055625, Elapsed = 00:01:00.0944889, TimeTotal = 05:55:46.1579477, Remaining = 05:54:46.0634588, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:16:14.4359229, WeightTotalEstimate = 01:16:14.4359229, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:45:31.1396319, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:00.0944889, HeatingEstimate = 01:08:59.9238269, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:50:06.2890539, WeightEstimate = 01:16:14.4359229 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:10:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:15:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.28152367769055625;StartedAtUtc;00:01:00.0944889;05:55:46.1579477;05:54:46.0634588;False;110;0;0;00:00:00;01:16:14.4359229;01:16:14.4359229;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:45:31.1396319;00:00:00;02:00:00;00:01:00.0944889;01:08:59.9238269;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:50:06.2890539 [PrintingService.cs@1918] 07/18/2026 22:15:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=36.285714285714285,printChamber1=36.285714285714285,printChamber2=36.285714285714285,printChamber3=36.285714285714285,printChamber4=36.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 36.285713 with temperature 31 [HeaterCheck.cs@88] 07/18/2026 22:15:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=50.059234619140625, Elapsed=00:00:27.2138636 [ControlledHeating.cs@486] 07/18/2026 22:15:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 36.285713 with temperature 31.5 [HeaterCheck.cs@67] 07/18/2026 22:15:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/18/2026 22:15:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 36.285713 with temperature 31.5 [HeaterCheck.cs@67] 07/18/2026 22:15:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/18/2026 22:15:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/18/2026 22:15:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 22:15:46 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/18/2026 22:15:46 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 22:15:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 36.285713 with temperature 31.5 [HeaterCheck.cs@67] 07/18/2026 22:15:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 50.89805603027344 after 00:00:30.2115714 [ControlledHeating.cs@493] 07/18/2026 22:15:46 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.4416271. SinceCollect=00:01:04.0345365. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2135, gen1=232, gen2=36, LatencyMode=Interactive, FreeMemory=5937217536, Live=448605616, HeapSizeBytes=455986032, FragmentedBytes=7631760, TotalCommittedBytes=467763200, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 36.285713 with temperature 31.5 [HeaterCheck.cs@67] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (33 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0616898. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0689508. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0817455. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:15:47 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 145477573059 (145477573059 @ 0) for mcu = 1197.765220 [18/07/2026 21:14:52] (1212.313108825 sec) to 147943971606 (from now=147823971606, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 145477573059 (145477573059 @ 0) for mcu = 1197.765220 [18/07/2026 21:14:52] (1212.313108825 sec) to 147943971606 (from external timestamp, flags=None, requested=147943971606 (147943971606 @ 0) for mcu = 1218.318741 [18/07/2026 21:15:13] (1232.86643005 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 145477573059 (145477573059 @ 0) for mcu = 1197.765220 [18/07/2026 21:14:52] (1212.313108825 sec) to 147943971606 (from external timestamp, flags=None, requested=147943971606 (147943971606 @ 0) for mcu = 1218.318741 [18/07/2026 21:15:13] (1232.86643005 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:15:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:15:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=50.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:15:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=37.285714285714285,powderChamber1=37.285714285714285,powderChamber2=37.285714285714285,powderChamber3=37.285714285714285,powderChamber4=37.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 50.90468072891235. Used = 50.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:15:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 66.0795789, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.3096475061881514, Elapsed = 00:01:06.0978456, TimeTotal = 05:55:46.1578986, Remaining = 05:54:40.0600530, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:16:14.4359229, WeightTotalEstimate = 01:16:14.4359229, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:45:31.1396319, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:06.0978456, HeatingEstimate = 01:08:53.9204211, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:50:06.2890539, WeightEstimate = 01:16:14.4359229 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:10:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:15:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.3096475061881514;StartedAtUtc;00:01:06.0978456;05:55:46.1578986;05:54:40.0600530;False;110;0;0;00:00:00;01:16:14.4359229;01:16:14.4359229;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:45:31.1396319;00:00:00;02:00:00;00:01:06.0978456;01:08:53.9204211;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:50:06.2890539 [PrintingService.cs@1918] 07/18/2026 22:15:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=37.285714285714285,printChamber1=37.285714285714285,printChamber2=37.285714285714285,printChamber3=37.285714285714285,printChamber4=37.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] approaching new target of 37.285713 with temperature 32 [HeaterCheck.cs@88] 07/18/2026 22:15:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 37.285713 with temperature 33.25 [HeaterCheck.cs@67] 07/18/2026 22:15:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 37.285713 with temperature 33.75 [HeaterCheck.cs@67] 07/18/2026 22:15:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 37.285713 with temperature 34.25 [HeaterCheck.cs@67] 07/18/2026 22:15:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 37.285713 with temperature 32.75 [HeaterCheck.cs@67] 07/18/2026 22:15:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 37.285713 with temperature 32.5 [HeaterCheck.cs@67] 07/18/2026 22:15:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=51.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:15:55 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=26.75,powderChamber4=27.25 that are outside of set tolerance 10 for current step target 37.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:15:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 51.90468072891235. Used = 51.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:15:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 72.078226, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.3377492131575087, Elapsed = 00:01:12.0964803, TimeTotal = 05:55:46.1578862, Remaining = 05:54:34.0614059, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:16:14.4359229, WeightTotalEstimate = 01:16:14.4359229, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:45:31.1396319, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:12.0964803, HeatingEstimate = 01:08:47.9217740, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:50:06.2890539, WeightEstimate = 01:16:14.4359229 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:10:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:15:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.3377492131575087;StartedAtUtc;00:01:12.0964803;05:55:46.1578862;05:54:34.0614059;False;110;0;0;00:00:00;01:16:14.4359229;01:16:14.4359229;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:45:31.1396319;00:00:00;02:00:00;00:01:12.0964803;01:08:47.9217740;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:50:06.2890539 [PrintingService.cs@1918] 07/18/2026 22:15:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=38.285714285714285,printChamber1=38.285714285714285,printChamber2=38.285714285714285,printChamber3=38.285714285714285,printChamber4=38.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:15:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 37.285713 with temperature 33.5 [HeaterCheck.cs@67] 07/18/2026 22:15:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 38.285713 with temperature 37.25 [HeaterCheck.cs@67] 07/18/2026 22:15:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 38.285713 with temperature 37.25 [HeaterCheck.cs@67] 07/18/2026 22:15:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1886466. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:15:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:15:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:16:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=52.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:16:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 52.90468072891235. Used = 52.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:16:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 78.0795791, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.36586368979801004, Elapsed = 00:01:18.0978409, TimeTotal = 05:55:46.1578937, Remaining = 05:54:28.0600528, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:16:14.4359229, WeightTotalEstimate = 01:16:14.4359229, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:45:31.1396319, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:18.0978409, HeatingEstimate = 01:08:41.9204209, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:50:06.2890539, WeightEstimate = 01:16:14.4359229 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:10:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:16:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.36586368979801004;StartedAtUtc;00:01:18.0978409;05:55:46.1578937;05:54:28.0600528;False;110;0;0;00:00:00;01:16:14.4359229;01:16:14.4359229;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:45:31.1396319;00:00:00;02:00:00;00:01:18.0978409;01:08:41.9204209;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:50:06.2890539 [PrintingService.cs@1918] 07/18/2026 22:16:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=39.285714285714285,printChamber1=39.285714285714285,printChamber2=39.285714285714285,printChamber3=39.285714285714285,printChamber4=39.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 37.285713 with temperature 34.5 [HeaterCheck.cs@67] 07/18/2026 22:16:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218839, estimate=67.25579542208735 for layer 2, Z=0.201 [PrintingService.cs@1524] 07/18/2026 22:16:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 2, island count 7 [PrintingService.cs@1569] 07/18/2026 22:16:05 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 3, start=0, count=110, Z=0.301 [PrintingService.cs@1518] 07/18/2026 22:16:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1175299 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:16:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:16:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=53.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:16:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 53.90468072891235. Used = 53.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:16:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 84.0817577, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.3928950191524087, Elapsed = 00:01:24.1000235, TimeTotal = 05:56:45.2149812, Remaining = 05:55:21.1149577, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:13.4930064, WeightTotalEstimate = 01:17:13.4930064, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:46:30.1967154, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:24.1000235, HeatingEstimate = 01:08:35.9182423, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:05.3461374, WeightEstimate = 01:17:13.4930064 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:11:28. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:16:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.3928950191524087;StartedAtUtc;00:01:24.1000235;05:56:45.2149812;05:55:21.1149577;False;110;0;0;00:00:00;01:17:13.4930064;01:17:13.4930064;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:46:30.1967154;00:00:00;02:00:00;00:01:24.1000235;01:08:35.9182423;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:05.3461374 [PrintingService.cs@1918] 07/18/2026 22:16:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=40.285714285714285,printChamber1=40.285714285714285,printChamber2=40.285714285714285,printChamber3=40.285714285714285,printChamber4=40.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 37.285713 with temperature 33.75 [HeaterCheck.cs@67] 07/18/2026 22:16:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=38.285714285714285,powderChamber1=38.285714285714285,powderChamber2=38.285714285714285,powderChamber3=38.285714285714285,powderChamber4=38.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=54.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:16:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 54.90468072891235. Used = 54.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:16:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 90.0826241, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.4209304816547268, Elapsed = 00:01:30.1010753, TimeTotal = 05:56:45.2151666, Remaining = 05:55:15.1140913, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:13.4930064, WeightTotalEstimate = 01:17:13.4930064, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:46:30.1967154, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:30.1010753, HeatingEstimate = 01:08:29.9173759, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:05.3461374, WeightEstimate = 01:17:13.4930064 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:11:28. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:16:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4209304816547268;StartedAtUtc;00:01:30.1010753;05:56:45.2151666;05:55:15.1140913;False;110;0;0;00:00:00;01:17:13.4930064;01:17:13.4930064;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:46:30.1967154;00:00:00;02:00:00;00:01:30.1010753;01:08:29.9173759;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:05.3461374 [PrintingService.cs@1918] 07/18/2026 22:16:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=41.285714285714285,printChamber1=41.285714285714285,printChamber2=41.285714285714285,printChamber3=41.285714285714285,printChamber4=41.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=54.71046447753906, Elapsed=00:00:27.6470791 [ControlledHeating.cs@486] 07/18/2026 22:16:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 38.285713 with temperature 35.25 [HeaterCheck.cs@67] 07/18/2026 22:16:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=39.285714285714285,powderChamber1=39.285714285714285,powderChamber2=39.285714285714285,powderChamber3=39.285714285714285,powderChamber4=39.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 55.46697235107422 after 00:00:30.6466127 [ControlledHeating.cs@493] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2066837. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630467. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2740129. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2873959. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:16:17 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 149155492834 (149155492834 @ 0) for mcu = 1228.414912 [18/07/2026 21:15:23] (1242.9624402833333 sec) to 151568518159 (from now=151448518159, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 149155492834 (149155492834 @ 0) for mcu = 1228.414912 [18/07/2026 21:15:23] (1242.9624402833333 sec) to 151568518159 (from external timestamp, flags=None, requested=151568518159 (151568518159 @ 0) for mcu = 1248.523678 [18/07/2026 21:15:43] (1263.0709846583334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 149155492834 (149155492834 @ 0) for mcu = 1228.414912 [18/07/2026 21:15:23] (1242.9624402833333 sec) to 151568518159 (from external timestamp, flags=None, requested=151568518159 (151568518159 @ 0) for mcu = 1248.523678 [18/07/2026 21:15:43] (1263.0709846583334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:16:17 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:16:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=55.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:16:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 55.90468072891235. Used = 55.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:16:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 96.08497, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.44897126171470675, Elapsed = 00:01:36.1032639, TimeTotal = 05:56:45.2150093, Remaining = 05:55:09.1117454, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:13.4930064, WeightTotalEstimate = 01:17:13.4930064, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:46:30.1967154, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:36.1032639, HeatingEstimate = 01:08:23.9150300, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:05.3461374, WeightEstimate = 01:17:13.4930064 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:11:28. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:16:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.44897126171470675;StartedAtUtc;00:01:36.1032639;05:56:45.2150093;05:55:09.1117454;False;110;0;0;00:00:00;01:17:13.4930064;01:17:13.4930064;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:46:30.1967154;00:00:00;02:00:00;00:01:36.1032639;01:08:23.9150300;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:05.3461374 [PrintingService.cs@1918] 07/18/2026 22:16:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=42.285714285714285,printChamber1=42.285714285714285,printChamber2=42.285714285714285,printChamber3=42.285714285714285,printChamber4=42.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:21 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=26.5,powderChamber4=26.5 that are outside of set tolerance 10 for current step target 39.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:16:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 39.285713 with temperature 35.5 [HeaterCheck.cs@67] 07/18/2026 22:16:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=56.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:16:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 56.90468072891235. Used = 56.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:16:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 102.0863938, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.4770082899702122, Elapsed = 00:01:42.1046499, TimeTotal = 05:56:45.2149715, Remaining = 05:55:03.1103216, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:13.4930064, WeightTotalEstimate = 01:17:13.4930064, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:46:30.1967154, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:42.1046499, HeatingEstimate = 01:08:17.9136062, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:05.3461374, WeightEstimate = 01:17:13.4930064 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:11:28. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:16:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.4770082899702122;StartedAtUtc;00:01:42.1046499;05:56:45.2149715;05:55:03.1103216;False;110;0;0;00:00:00;01:17:13.4930064;01:17:13.4930064;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:46:30.1967154;00:00:00;02:00:00;00:01:42.1046499;01:08:17.9136062;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:05.3461374 [PrintingService.cs@1918] 07/18/2026 22:16:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=43.285714285714285,printChamber1=43.285714285714285,printChamber2=43.285714285714285,printChamber3=43.285714285714285,printChamber4=43.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 43.285713 with temperature 41.25 [HeaterCheck.cs@67] 07/18/2026 22:16:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 43.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:16:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3864506. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:16:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:16:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:16:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=57.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:16:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 57.90468072891235. Used = 57.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:16:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 108.0884707, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.5050485428268956, Elapsed = 00:01:48.1067263, TimeTotal = 05:56:45.2149710, Remaining = 05:54:57.1082447, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:13.4930064, WeightTotalEstimate = 01:17:13.4930064, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:46:30.1967154, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:48.1067263, HeatingEstimate = 01:08:11.9115293, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:05.3461374, WeightEstimate = 01:17:13.4930064 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:11:28. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:16:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5050485428268956;StartedAtUtc;00:01:48.1067263;05:56:45.2149710;05:54:57.1082447;False;110;0;0;00:00:00;01:17:13.4930064;01:17:13.4930064;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:46:30.1967154;00:00:00;02:00:00;00:01:48.1067263;01:08:11.9115293;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:05.3461374 [PrintingService.cs@1918] 07/18/2026 22:16:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=44.285714285714285,printChamber1=44.285714285714285,printChamber2=44.285714285714285,printChamber3=44.285714285714285,printChamber4=44.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284030, estimate=76.22038276065601 for layer 3, Z=0.301 [PrintingService.cs@1524] 07/18/2026 22:16:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 3, island count 7 [PrintingService.cs@1569] 07/18/2026 22:16:34 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 4, start=0, count=110, Z=0.401 [PrintingService.cs@1518] 07/18/2026 22:16:34 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:16:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=58.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:16:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 58.90468072891235. Used = 58.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:16:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 114.1019277, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.5327205672825894, Elapsed = 00:01:54.1201808, TimeTotal = 05:57:02.1465828, Remaining = 05:55:08.0264020, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:30.4246207, WeightTotalEstimate = 01:17:30.4246207, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:46:47.1283297, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:01:54.1201808, HeatingEstimate = 01:08:05.8980723, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:22.2777517, WeightEstimate = 01:17:30.4246207 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:11:45. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:16:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5327205672825894;StartedAtUtc;00:01:54.1201808;05:57:02.1465828;05:55:08.0264020;False;110;0;0;00:00:00;01:17:30.4246207;01:17:30.4246207;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:46:47.1283297;00:00:00;02:00:00;00:01:54.1201808;01:08:05.8980723;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:22.2777517 [PrintingService.cs@1918] 07/18/2026 22:16:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=45.285714285714285,printChamber1=45.285714285714285,printChamber2=45.285714285714285,printChamber3=45.285714285714285,printChamber4=45.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 39.285713 with temperature 24 [HeaterCheck.cs@111] 07/18/2026 22:16:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 39.285713 with temperature 37.75 [HeaterCheck.cs@67] 07/18/2026 22:16:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=59.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:16:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 59.90468072891235. Used = 59.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:16:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 120.1063751, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.5607497242976164, Elapsed = 00:02:00.1246279, TimeTotal = 05:57:02.1465825, Remaining = 05:55:02.0219546, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:30.4246207, WeightTotalEstimate = 01:17:30.4246207, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:46:47.1283297, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:00.1246279, HeatingEstimate = 01:07:59.8936249, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:22.2777517, WeightEstimate = 01:17:30.4246207 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:11:45. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:16:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5607497242976164;StartedAtUtc;00:02:00.1246279;05:57:02.1465825;05:55:02.0219546;False;110;0;0;00:00:00;01:17:30.4246207;01:17:30.4246207;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:46:47.1283297;00:00:00;02:00:00;00:02:00.1246279;01:07:59.8936249;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:22.2777517 [PrintingService.cs@1918] 07/18/2026 22:16:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=46.285714285714285,printChamber1=46.285714285714285,printChamber2=46.285714285714285,printChamber3=46.285714285714285,printChamber4=46.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=58.35811233520508, Elapsed=00:00:27.2003236 [ControlledHeating.cs@486] 07/18/2026 22:16:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 58.890380859375 after 00:00:30.2015037 [ControlledHeating.cs@493] 07/18/2026 22:16:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:16:47 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.3056072. SinceCollect=00:01:00.7154401. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2269, gen1=240, gen2=37, LatencyMode=Interactive, FreeMemory=5983911936, Live=447236520, HeapSizeBytes=455057880, FragmentedBytes=8298400, TotalCommittedBytes=465911808, PinnedObjectsCount=24, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633386. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0668547. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0778301. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:16:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 152780039387 (152780039387 @ 0) for mcu = 1258.619749 [18/07/2026 21:15:53] (1273.1669948916667 sec) to 155229212093 (from now=155109212093, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 152780039387 (152780039387 @ 0) for mcu = 1258.619749 [18/07/2026 21:15:53] (1273.1669948916667 sec) to 155229212093 (from external timestamp, flags=None, requested=155229212093 (155229212093 @ 0) for mcu = 1279.029726 [18/07/2026 21:16:13] (1293.5767674416666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 152780039387 (152780039387 @ 0) for mcu = 1258.619749 [18/07/2026 21:15:53] (1273.1669948916667 sec) to 155229212093 (from external timestamp, flags=None, requested=155229212093 (155229212093 @ 0) for mcu = 1279.029726 [18/07/2026 21:16:13] (1293.5767674416666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:16:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 35.25 [HeaterCheck.cs@67] 07/18/2026 22:16:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 35.5 [HeaterCheck.cs@67] 07/18/2026 22:16:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=60.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:16:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 60.90468072891235. Used = 60.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:16:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 126.1069575, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.5887608930680326, Elapsed = 00:02:06.1252216, TimeTotal = 05:57:02.1465938, Remaining = 05:54:56.0213722, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:30.4246207, WeightTotalEstimate = 01:17:30.4246207, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:46:47.1283297, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:06.1252216, HeatingEstimate = 01:07:53.8930425, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:22.2777517, WeightEstimate = 01:17:30.4246207 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:11:45. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:16:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.5887608930680326;StartedAtUtc;00:02:06.1252216;05:57:02.1465938;05:54:56.0213722;False;110;0;0;00:00:00;01:17:30.4246207;01:17:30.4246207;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:46:47.1283297;00:00:00;02:00:00;00:02:06.1252216;01:07:53.8930425;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:22.2777517 [PrintingService.cs@1918] 07/18/2026 22:16:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=47.285714285714285,printChamber1=47.285714285714285,printChamber2=47.285714285714285,printChamber3=47.285714285714285,printChamber4=47.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 35 [HeaterCheck.cs@67] 07/18/2026 22:16:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 34.5 [HeaterCheck.cs@67] 07/18/2026 22:16:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=61.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:16:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 61.90468072891235. Used = 61.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:16:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 132.1128256, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.6167969677704702, Elapsed = 00:02:12.1311510, TimeTotal = 05:57:02.1466551, Remaining = 05:54:50.0155041, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:30.4246207, WeightTotalEstimate = 01:17:30.4246207, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:46:47.1283297, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:12.1311510, HeatingEstimate = 01:07:47.8871744, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:22.2777517, WeightEstimate = 01:17:30.4246207 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:11:45. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:16:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6167969677704702;StartedAtUtc;00:02:12.1311510;05:57:02.1466551;05:54:50.0155041;False;110;0;0;00:00:00;01:17:30.4246207;01:17:30.4246207;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:46:47.1283297;00:00:00;02:00:00;00:02:12.1311510;01:07:47.8871744;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:22.2777517 [PrintingService.cs@1918] 07/18/2026 22:16:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=48.285714285714285,printChamber1=48.285714285714285,printChamber2=48.285714285714285,printChamber3=48.285714285714285,printChamber4=48.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:16:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1825286. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:16:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:16:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:17:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=62.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:17:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 62.90468072891235. Used = 62.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:17:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 138.1190168, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.6448343947290377, Elapsed = 00:02:18.1373699, TimeTotal = 05:57:02.1466828, Remaining = 05:54:44.0093129, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:30.4246207, WeightTotalEstimate = 01:17:30.4246207, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:46:47.1283297, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:18.1373699, HeatingEstimate = 01:07:41.8809832, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:22.2777517, WeightEstimate = 01:17:30.4246207 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:11:45. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:17:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6448343947290377;StartedAtUtc;00:02:18.1373699;05:57:02.1466828;05:54:44.0093129;False;110;0;0;00:00:00;01:17:30.4246207;01:17:30.4246207;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:46:47.1283297;00:00:00;02:00:00;00:02:18.1373699;01:07:41.8809832;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:22.2777517 [PrintingService.cs@1918] 07/18/2026 22:17:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=49.285714285714285,printChamber1=49.285714285714285,printChamber2=49.285714285714285,printChamber3=49.285714285714285,printChamber4=49.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 35 [HeaterCheck.cs@67] 07/18/2026 22:17:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0365866 ~ 6.01 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:17:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 36 [HeaterCheck.cs@67] 07/18/2026 22:17:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=63.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:17:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 63.90468072891235. Used = 63.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:17:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 144.1227376, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.6728599363109999, Elapsed = 00:02:24.1410422, TimeTotal = 05:57:02.1466343, Remaining = 05:54:38.0055921, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:30.4246207, WeightTotalEstimate = 01:17:30.4246207, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:46:47.1283297, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:24.1410422, HeatingEstimate = 01:07:35.8772624, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:22.2777517, WeightEstimate = 01:17:30.4246207 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:11:45. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:17:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.6728599363109999;StartedAtUtc;00:02:24.1410422;05:57:02.1466343;05:54:38.0055921;False;110;0;0;00:00:00;01:17:30.4246207;01:17:30.4246207;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:46:47.1283297;00:00:00;02:00:00;00:02:24.1410422;01:07:35.8772624;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:22.2777517 [PrintingService.cs@1918] 07/18/2026 22:17:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=50.285714285714285,printChamber1=50.285714285714285,printChamber2=50.285714285714285,printChamber3=50.285714285714285,printChamber4=50.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218851, estimate=67.12317021614174 for layer 4, Z=0.401 [PrintingService.cs@1524] 07/18/2026 22:17:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 4, island count 7 [PrintingService.cs@1569] 07/18/2026 22:17:09 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 5, start=0, count=110, Z=0.501 [PrintingService.cs@1518] 07/18/2026 22:17:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:17:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=64.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:17:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 64.90468072891235. Used = 64.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:17:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 150.122191, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.7002345428545562, Elapsed = 00:02:30.1405269, TimeTotal = 05:57:21.4624974, Remaining = 05:54:51.3219705, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:49.7404525, WeightTotalEstimate = 01:17:49.7404525, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:47:06.4441615, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:30.1405269, HeatingEstimate = 01:07:29.8778090, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:41.5935835, WeightEstimate = 01:17:49.7404525 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:12:04. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:17:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7002345428545562;StartedAtUtc;00:02:30.1405269;05:57:21.4624974;05:54:51.3219705;False;110;0;0;00:00:00;01:17:49.7404525;01:17:49.7404525;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:47:06.4441615;00:00:00;02:00:00;00:02:30.1405269;01:07:29.8778090;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:41.5935835 [PrintingService.cs@1918] 07/18/2026 22:17:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=51.285714285714285,printChamber1=51.285714285714285,printChamber2=51.285714285714285,printChamber3=51.285714285714285,printChamber4=51.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=64.85175323486328, Elapsed=00:00:27.5033593 [ControlledHeating.cs@486] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 64.5645751953125 after 00:00:30.5041228 [ControlledHeating.cs@493] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1939746. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0622828. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2573105. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2711605. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:17:18 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 156440733321 (156440733321 @ 0) for mcu = 1289.125981 [18/07/2026 21:16:24] (1303.672777675 sec) to 158852515963 (from now=158732515963, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 156440733321 (156440733321 @ 0) for mcu = 1289.125981 [18/07/2026 21:16:24] (1303.672777675 sec) to 158852515963 (from external timestamp, flags=None, requested=158852515963 (158852515963 @ 0) for mcu = 1309.224431 [18/07/2026 21:16:44] (1323.7709663583332 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 156440733321 (156440733321 @ 0) for mcu = 1289.125981 [18/07/2026 21:16:24] (1303.672777675 sec) to 158852515963 (from external timestamp, flags=None, requested=158852515963 (158852515963 @ 0) for mcu = 1309.224431 [18/07/2026 21:16:44] (1323.7709663583332 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:17:18 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:17:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=65.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:17:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 65.90468072891235. Used = 65.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:17:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 156.12226, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.7282176679371946, Elapsed = 00:02:36.1405176, TimeTotal = 05:57:21.4624191, Remaining = 05:54:45.3219015, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:49.7404525, WeightTotalEstimate = 01:17:49.7404525, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:47:06.4441615, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:36.1405176, HeatingEstimate = 01:07:23.8777400, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:41.5935835, WeightEstimate = 01:17:49.7404525 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:12:04. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:17:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7282176679371946;StartedAtUtc;00:02:36.1405176;05:57:21.4624191;05:54:45.3219015;False;110;0;0;00:00:00;01:17:49.7404525;01:17:49.7404525;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:47:06.4441615;00:00:00;02:00:00;00:02:36.1405176;01:07:23.8777400;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:41.5935835 [PrintingService.cs@1918] 07/18/2026 22:17:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=52.285714285714285,printChamber1=52.285714285714285,printChamber2=52.285714285714285,printChamber3=52.285714285714285,printChamber4=52.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 34.5 [HeaterCheck.cs@67] 07/18/2026 22:17:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 34.75 [HeaterCheck.cs@67] 07/18/2026 22:17:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 34.5 [HeaterCheck.cs@67] 07/18/2026 22:17:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=66.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:17:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 66.90468072891235. Used = 66.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:17:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 162.1227505, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.7562031941293392, Elapsed = 00:02:42.1410238, TimeTotal = 05:57:21.4624348, Remaining = 05:54:39.3214110, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:49.7404525, WeightTotalEstimate = 01:17:49.7404525, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:47:06.4441615, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:42.1410238, HeatingEstimate = 01:07:17.8772495, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:41.5935835, WeightEstimate = 01:17:49.7404525 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:12:04. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:17:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7562031941293392;StartedAtUtc;00:02:42.1410238;05:57:21.4624348;05:54:39.3214110;False;110;0;0;00:00:00;01:17:49.7404525;01:17:49.7404525;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:47:06.4441615;00:00:00;02:00:00;00:02:42.1410238;01:07:17.8772495;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:41.5935835 [PrintingService.cs@1918] 07/18/2026 22:17:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=53.285714285714285,printChamber1=53.285714285714285,printChamber2=53.285714285714285,printChamber3=53.285714285714285,printChamber4=53.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 34.75 [HeaterCheck.cs@67] 07/18/2026 22:17:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 35 [HeaterCheck.cs@67] 07/18/2026 22:17:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9997550. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3809153. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:17:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:17:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:17:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 35 [HeaterCheck.cs@67] 07/18/2026 22:17:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 35 [HeaterCheck.cs@67] 07/18/2026 22:17:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=67.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:17:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 67.90468072891235. Used = 67.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:17:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 168.1220591, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.7841831132038133, Elapsed = 00:02:48.1403276, TimeTotal = 05:57:21.4624300, Remaining = 05:54:33.3221024, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:49.7404525, WeightTotalEstimate = 01:17:49.7404525, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:47:06.4441615, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:48.1403276, HeatingEstimate = 01:07:11.8779409, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:41.5935835, WeightEstimate = 01:17:49.7404525 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:12:04. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:17:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.7841831132038133;StartedAtUtc;00:02:48.1403276;05:57:21.4624300;05:54:33.3221024;False;110;0;0;00:00:00;01:17:49.7404525;01:17:49.7404525;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:47:06.4441615;00:00:00;02:00:00;00:02:48.1403276;01:07:11.8779409;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:41.5935835 [PrintingService.cs@1918] 07/18/2026 22:17:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=54.285714285714285,printChamber1=54.285714285714285,printChamber2=54.285714285714285,printChamber3=54.285714285714285,printChamber4=54.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 35.25 [HeaterCheck.cs@67] 07/18/2026 22:17:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 35 [HeaterCheck.cs@67] 07/18/2026 22:17:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 36.25 [HeaterCheck.cs@67] 07/18/2026 22:17:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 36.25 [HeaterCheck.cs@67] 07/18/2026 22:17:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 34.5 [HeaterCheck.cs@67] 07/18/2026 22:17:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=68.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:17:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 68.90468072891235. Used = 68.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:17:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 174.127509, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.8121926190856745, Elapsed = 00:02:54.1459769, TimeTotal = 05:57:21.4626294, Remaining = 05:54:27.3166525, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:49.7404525, WeightTotalEstimate = 01:17:49.7404525, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:47:06.4441615, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:02:54.1459769, HeatingEstimate = 01:07:05.8724910, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:41.5935835, WeightEstimate = 01:17:49.7404525 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:12:04. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:17:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8121926190856745;StartedAtUtc;00:02:54.1459769;05:57:21.4626294;05:54:27.3166525;False;110;0;0;00:00:00;01:17:49.7404525;01:17:49.7404525;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:47:06.4441615;00:00:00;02:00:00;00:02:54.1459769;01:07:05.8724910;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:41.5935835 [PrintingService.cs@1918] 07/18/2026 22:17:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=55.285714285714285,printChamber1=55.285714285714285,printChamber2=55.285714285714285,printChamber3=55.285714285714285,printChamber4=55.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284020, estimate=76.03806440201042 for layer 5, Z=0.501 [PrintingService.cs@1524] 07/18/2026 22:17:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 5, island count 7 [PrintingService.cs@1569] 07/18/2026 22:17:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 6, start=0, count=110, Z=0.601 [PrintingService.cs@1518] 07/18/2026 22:17:38 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:17:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 39.285713 with temperature 35.5 [HeaterCheck.cs@67] 07/18/2026 22:17:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=69.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:17:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 69.90468072891235. Used = 69.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:17:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 180.1334622, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.839986184339642, Elapsed = 00:03:00.1517277, TimeTotal = 05:57:26.9869932, Remaining = 05:54:26.8352655, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:55.2650187, WeightTotalEstimate = 01:17:55.2650187, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:47:11.9687277, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:00.1517277, HeatingEstimate = 01:06:59.8665378, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:47.1181497, WeightEstimate = 01:17:55.2650187 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:12:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:17:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.839986184339642;StartedAtUtc;00:03:00.1517277;05:57:26.9869932;05:54:26.8352655;False;110;0;0;00:00:00;01:17:55.2650187;01:17:55.2650187;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:47:11.9687277;00:00:00;02:00:00;00:03:00.1517277;01:06:59.8665378;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:47.1181497 [PrintingService.cs@1918] 07/18/2026 22:17:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=56.285714285714285,printChamber1=56.285714285714285,printChamber2=56.285714285714285,printChamber3=56.285714285714285,printChamber4=56.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=70.0500259399414, Elapsed=00:00:27.2095597 [ControlledHeating.cs@486] 07/18/2026 22:17:45 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=40.285714285714285,powderChamber1=40.285714285714285,powderChamber2=40.285714285714285,powderChamber3=40.285714285714285,powderChamber4=40.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 40.285713 with temperature 36.5 [HeaterCheck.cs@67] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 69.34830474853516 after 00:00:30.2101380 [ControlledHeating.cs@493] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 40.285713 with temperature 37.25 [HeaterCheck.cs@67] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2853120. SinceCollect=00:01:00.6947245. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 40.285713 with temperature 37.25 [HeaterCheck.cs@67] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2399, gen1=249, gen2=38, LatencyMode=Interactive, FreeMemory=5966512128, Live=446728008, HeapSizeBytes=455103216, FragmentedBytes=8732208, TotalCommittedBytes=465911808, PinnedObjectsCount=24, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633411. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0632441. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0742556. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:17:48 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 160064037191 (160064037191 @ 0) for mcu = 1319.321030 [18/07/2026 21:16:54] (1333.8669765916666 sec) to 162512004922 (from now=162392004922, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 160064037191 (160064037191 @ 0) for mcu = 1319.321030 [18/07/2026 21:16:54] (1333.8669765916666 sec) to 162512004922 (from external timestamp, flags=None, requested=162512004922 (162512004922 @ 0) for mcu = 1339.721187 [18/07/2026 21:17:14] (1354.2667076833334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 160064037191 (160064037191 @ 0) for mcu = 1319.321030 [18/07/2026 21:16:54] (1333.8669765916666 sec) to 162512004922 (from external timestamp, flags=None, requested=162512004922 (162512004922 @ 0) for mcu = 1339.721187 [18/07/2026 21:17:14] (1354.2667076833334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:17:48 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:17:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=70.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:17:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 70.90468072891235. Used = 70.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:17:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 186.135618, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.8679721359812388, Elapsed = 00:03:06.1538710, TimeTotal = 05:57:26.9869807, Remaining = 05:54:20.8331097, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:55.2650187, WeightTotalEstimate = 01:17:55.2650187, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:47:11.9687277, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:06.1538710, HeatingEstimate = 01:06:53.8643820, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:47.1181497, WeightEstimate = 01:17:55.2650187 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:12:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:17:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8679721359812388;StartedAtUtc;00:03:06.1538710;05:57:26.9869807;05:54:20.8331097;False;110;0;0;00:00:00;01:17:55.2650187;01:17:55.2650187;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:47:11.9687277;00:00:00;02:00:00;00:03:06.1538710;01:06:53.8643820;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:47.1181497 [PrintingService.cs@1918] 07/18/2026 22:17:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=57.285714285714285,printChamber1=57.285714285714285,printChamber2=57.285714285714285,printChamber3=57.285714285714285,printChamber4=57.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=41.285714285714285,powderChamber1=41.285714285714285,powderChamber2=41.285714285714285,powderChamber3=41.285714285714285,powderChamber4=41.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 41.285713 with temperature 36.75 [HeaterCheck.cs@67] 07/18/2026 22:17:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 41.285713 with temperature 38 [HeaterCheck.cs@67] 07/18/2026 22:17:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=71.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:17:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 71.90468072891235. Used = 71.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:17:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 192.138732, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.8959626321225742, Elapsed = 00:03:12.1569891, TimeTotal = 05:57:26.9869848, Remaining = 05:54:14.8299957, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:55.2650187, WeightTotalEstimate = 01:17:55.2650187, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:47:11.9687277, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:12.1569891, HeatingEstimate = 01:06:47.8612680, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:47.1181497, WeightEstimate = 01:17:55.2650187 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:12:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:17:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.8959626321225742;StartedAtUtc;00:03:12.1569891;05:57:26.9869848;05:54:14.8299957;False;110;0;0;00:00:00;01:17:55.2650187;01:17:55.2650187;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:47:11.9687277;00:00:00;02:00:00;00:03:12.1569891;01:06:47.8612680;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:47.1181497 [PrintingService.cs@1918] 07/18/2026 22:17:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=58.285714285714285,printChamber1=58.285714285714285,printChamber2=58.285714285714285,printChamber3=58.285714285714285,printChamber4=58.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:17:57 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=29.25 that are outside of set tolerance 10 for current step target 41.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:18:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9964509. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1845304. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:18:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:18:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:18:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=72.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:18:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 72.90468072891235. Used = 72.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:18:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 198.1387085, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.9239384437237258, Elapsed = 00:03:18.1569577, TimeTotal = 05:57:26.9869769, Remaining = 05:54:08.8300192, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:55.2650187, WeightTotalEstimate = 01:17:55.2650187, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:47:11.9687277, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:18.1569577, HeatingEstimate = 01:06:41.8612915, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:47.1181497, WeightEstimate = 01:17:55.2650187 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:12:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:18:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9239384437237258;StartedAtUtc;00:03:18.1569577;05:57:26.9869769;05:54:08.8300192;False;110;0;0;00:00:00;01:17:55.2650187;01:17:55.2650187;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:47:11.9687277;00:00:00;02:00:00;00:03:18.1569577;01:06:41.8612915;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:47.1181497 [PrintingService.cs@1918] 07/18/2026 22:18:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=59.285714285714285,printChamber1=59.285714285714285,printChamber2=59.285714285714285,printChamber3=59.285714285714285,printChamber4=59.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:18:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 59.285713 with temperature 56.25 [HeaterCheck.cs@67] 07/18/2026 22:18:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0395017 ~ 6.01 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:18:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=73.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:18:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 73.90468072891235. Used = 73.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:18:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 204.1419877, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.9519296985850035, Elapsed = 00:03:24.1602385, TimeTotal = 05:57:26.9869785, Remaining = 05:54:02.8267400, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:17:55.2650187, WeightTotalEstimate = 01:17:55.2650187, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:47:11.9687277, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:24.1602385, HeatingEstimate = 01:06:35.8580123, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:51:47.1181497, WeightEstimate = 01:17:55.2650187 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:12:10. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:18:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9519296985850035;StartedAtUtc;00:03:24.1602385;05:57:26.9869785;05:54:02.8267400;False;110;0;0;00:00:00;01:17:55.2650187;01:17:55.2650187;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:47:11.9687277;00:00:00;02:00:00;00:03:24.1602385;01:06:35.8580123;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:51:47.1181497 [PrintingService.cs@1918] 07/18/2026 22:18:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=60.285714285714285,printChamber1=60.285714285714285,printChamber2=60.285714285714285,printChamber3=60.285714285714285,printChamber4=60.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:18:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218844, estimate=67.17086373597331 for layer 6, Z=0.601 [PrintingService.cs@1524] 07/18/2026 22:18:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 6, island count 7 [PrintingService.cs@1569] 07/18/2026 22:18:11 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 7, start=0, count=110, Z=0.701 [PrintingService.cs@1518] 07/18/2026 22:18:11 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:18:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=74.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:18:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 74.90468072891235. Used = 74.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:18:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 210.141841, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 0.9763224176671668, Elapsed = 00:03:30.1601688, TimeTotal = 05:58:45.6932543, Remaining = 05:55:15.5330855, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:19:13.9712175, WeightTotalEstimate = 01:19:13.9712175, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:48:30.6749265, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:30.1601688, HeatingEstimate = 01:06:29.8581590, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:53:05.8243485, WeightEstimate = 01:19:13.9712175 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:13:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:18:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 0.9763224176671668;StartedAtUtc;00:03:30.1601688;05:58:45.6932543;05:55:15.5330855;False;110;0;0;00:00:00;01:19:13.9712175;01:19:13.9712175;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:48:30.6749265;00:00:00;02:00:00;00:03:30.1601688;01:06:29.8581590;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:53:05.8243485 [PrintingService.cs@1918] 07/18/2026 22:18:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=61.285714285714285,printChamber1=61.285714285714285,printChamber2=61.285714285714285,printChamber3=61.285714285714285,printChamber4=61.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:18:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=75.52391052246094, Elapsed=00:00:27.4881638 [ControlledHeating.cs@486] 07/18/2026 22:18:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 61.285713 with temperature 59.5 [HeaterCheck.cs@67] 07/18/2026 22:18:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 61.285713 with temperature 58.75 [HeaterCheck.cs@67] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 75.1142578125 after 00:00:30.4903502 [ControlledHeating.cs@493] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2029709. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631097. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2684753. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2783593. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:18:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 163723526150 (163723526150 @ 0) for mcu = 1349.817661 [18/07/2026 21:17:24] (1364.3627179166667 sec) to 166136360256 (from now=166016360256, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 163723526150 (163723526150 @ 0) for mcu = 1349.817661 [18/07/2026 21:17:24] (1364.3627179166667 sec) to 166136360256 (from external timestamp, flags=None, requested=166136360256 (166136360256 @ 0) for mcu = 1369.925114 [18/07/2026 21:17:44] (1384.4696688 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 163723526150 (163723526150 @ 0) for mcu = 1349.817661 [18/07/2026 21:17:24] (1364.3627179166667 sec) to 166136360256 (from external timestamp, flags=None, requested=166136360256 (166136360256 @ 0) for mcu = 1369.925114 [18/07/2026 21:17:44] (1384.4696688 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=75.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 75.90468072891235. Used = 75.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 216.1422541, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.0041976636405037, Elapsed = 00:03:36.1605080, TimeTotal = 05:58:45.6931804, Remaining = 05:55:09.5326724, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:19:13.9712175, WeightTotalEstimate = 01:19:13.9712175, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:48:30.6749265, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:36.1605080, HeatingEstimate = 01:06:23.8577459, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:53:05.8243485, WeightEstimate = 01:19:13.9712175 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:13:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0041976636405037;StartedAtUtc;00:03:36.1605080;05:58:45.6931804;05:55:09.5326724;False;110;0;0;00:00:00;01:19:13.9712175;01:19:13.9712175;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:48:30.6749265;00:00:00;02:00:00;00:03:36.1605080;01:06:23.8577459;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:53:05.8243485 [PrintingService.cs@1918] 07/18/2026 22:18:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=62.285714285714285,printChamber1=62.285714285714285,printChamber2=62.285714285714285,printChamber3=62.285714285714285,printChamber4=62.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:18:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 41.285713 with temperature 29.25 [HeaterCheck.cs@111] 07/18/2026 22:18:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=76.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:18:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 76.90468072891235. Used = 76.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:18:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 222.1425499, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.0320727230331581, Elapsed = 00:03:42.1608078, TimeTotal = 05:58:45.6931844, Remaining = 05:55:03.5323766, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:19:13.9712175, WeightTotalEstimate = 01:19:13.9712175, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:48:30.6749265, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:42.1608078, HeatingEstimate = 01:06:17.8574501, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:53:05.8243485, WeightEstimate = 01:19:13.9712175 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:13:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:18:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0320727230331581;StartedAtUtc;00:03:42.1608078;05:58:45.6931844;05:55:03.5323766;False;110;0;0;00:00:00;01:19:13.9712175;01:19:13.9712175;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:48:30.6749265;00:00:00;02:00:00;00:03:42.1608078;01:06:17.8574501;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:53:05.8243485 [PrintingService.cs@1918] 07/18/2026 22:18:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=63.285714285714285,printChamber1=63.285714285714285,printChamber2=63.285714285714285,printChamber3=63.285714285714285,printChamber4=63.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:18:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9966525. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3867870. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:18:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:18:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:18:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=42.285714285714285,powderChamber1=42.285714285714285,powderChamber2=42.285714285714285,powderChamber3=42.285714285714285,powderChamber4=42.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:18:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 42.285713 with temperature 37.5 [HeaterCheck.cs@67] 07/18/2026 22:18:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=77.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:18:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 77.90468072891235. Used = 77.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:18:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 228.1438509, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.0599523846171304, Elapsed = 00:03:48.1620981, TimeTotal = 05:58:45.6931737, Remaining = 05:54:57.5310756, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:19:13.9712175, WeightTotalEstimate = 01:19:13.9712175, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:48:30.6749265, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:48.1620981, HeatingEstimate = 01:06:11.8561491, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:53:05.8243485, WeightEstimate = 01:19:13.9712175 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:13:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:18:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0599523846171304;StartedAtUtc;00:03:48.1620981;05:58:45.6931737;05:54:57.5310756;False;110;0;0;00:00:00;01:19:13.9712175;01:19:13.9712175;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:48:30.6749265;00:00:00;02:00:00;00:03:48.1620981;01:06:11.8561491;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:53:05.8243485 [PrintingService.cs@1918] 07/18/2026 22:18:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=64.28571428571428,printChamber1=64.28571428571428,printChamber2=64.28571428571428,printChamber3=64.28571428571428,printChamber4=64.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:18:36 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=43.285714285714285,powderChamber1=43.285714285714285,powderChamber2=43.285714285714285,powderChamber3=43.285714285714285,powderChamber4=43.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:18:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 43.285713 with temperature 38 [HeaterCheck.cs@88] 07/18/2026 22:18:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=78.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:18:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 78.90468072891235. Used = 78.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:18:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 234.142282, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.0878196833502847, Elapsed = 00:03:54.1607295, TimeTotal = 05:58:45.6933740, Remaining = 05:54:51.5326445, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:19:13.9712175, WeightTotalEstimate = 01:19:13.9712175, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:48:30.6749265, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:03:54.1607295, HeatingEstimate = 01:06:05.8577180, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:53:05.8243485, WeightEstimate = 01:19:13.9712175 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:13:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:18:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.0878196833502847;StartedAtUtc;00:03:54.1607295;05:58:45.6933740;05:54:51.5326445;False;110;0;0;00:00:00;01:19:13.9712175;01:19:13.9712175;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:48:30.6749265;00:00:00;02:00:00;00:03:54.1607295;01:06:05.8577180;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:53:05.8243485 [PrintingService.cs@1918] 07/18/2026 22:18:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=65.28571428571428,printChamber1=65.28571428571428,printChamber2=65.28571428571428,printChamber3=65.28571428571428,printChamber4=65.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:18:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:18:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:18:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:18:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 40 [HeaterCheck.cs@67] 07/18/2026 22:18:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:42 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=27.25 that are outside of set tolerance 10 for current step target 43.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:18:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:18:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=79.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:18:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 79.90468072891235. Used = 79.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:18:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 240.1451413, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.115705733204167, Elapsed = 00:04:00.1633929, TimeTotal = 05:58:45.6931781, Remaining = 05:54:45.5297852, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:19:13.9712175, WeightTotalEstimate = 01:19:13.9712175, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:48:30.6749265, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:00.1633929, HeatingEstimate = 01:05:59.8548587, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:53:05.8243485, WeightEstimate = 01:19:13.9712175 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:13:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:18:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.115705733204167;StartedAtUtc;00:04:00.1633929;05:58:45.6931781;05:54:45.5297852;False;110;0;0;00:00:00;01:19:13.9712175;01:19:13.9712175;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:48:30.6749265;00:00:00;02:00:00;00:04:00.1633929;01:05:59.8548587;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:53:05.8243485 [PrintingService.cs@1918] 07/18/2026 22:18:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=66.28571428571428,printChamber1=66.28571428571428,printChamber2=66.28571428571428,printChamber3=66.28571428571428,printChamber4=66.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:18:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:18:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:18:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=81.3912582397461, Elapsed=00:00:27.1985168 [ControlledHeating.cs@486] 07/18/2026 22:18:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:18:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284024, estimate=76.27464631498232 for layer 7, Z=0.701 [PrintingService.cs@1524] 07/18/2026 22:18:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 7, island count 7 [PrintingService.cs@1569] 07/18/2026 22:18:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 8, start=0, count=110, Z=0.801 [PrintingService.cs@1518] 07/18/2026 22:18:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:18:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 81.50110626220703 after 00:00:30.2002734 [ControlledHeating.cs@493] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2891988. SinceCollect=00:01:00.6957789. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2536, gen1=260, gen2=39, LatencyMode=Interactive, FreeMemory=5972738048, Live=446897464, HeapSizeBytes=455145680, FragmentedBytes=8668808, TotalCommittedBytes=465911808, PinnedObjectsCount=24, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=80.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631980. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0645435. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0795472. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:18:49 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 167347881484 (167347881484 @ 0) for mcu = 1380.021456 [18/07/2026 21:17:54] (1394.5656790333333 sec) to 169795960957 (from now=169675960957, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 167347881484 (167347881484 @ 0) for mcu = 1380.021456 [18/07/2026 21:17:54] (1394.5656790333333 sec) to 169795960957 (from external timestamp, flags=None, requested=169795960957 (169795960957 @ 0) for mcu = 1400.422653 [18/07/2026 21:18:15] (1414.9663413083333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 167347881484 (167347881484 @ 0) for mcu = 1380.021456 [18/07/2026 21:17:54] (1394.5656790333333 sec) to 169795960957 (from external timestamp, flags=None, requested=169795960957 (169795960957 @ 0) for mcu = 1400.422653 [18/07/2026 21:18:15] (1414.9663413083333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 80.90468072891235. Used = 80.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 246.148211, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.1427661291326057, Elapsed = 00:04:06.1671033, TimeTotal = 05:59:01.3370264, Remaining = 05:54:55.1699231, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:19:29.6144251, WeightTotalEstimate = 01:19:29.6144251, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:48:46.3181341, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:06.1671033, HeatingEstimate = 01:05:53.8517890, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:53:21.4675561, WeightEstimate = 01:19:29.6144251 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:13:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1427661291326057;StartedAtUtc;00:04:06.1671033;05:59:01.3370264;05:54:55.1699231;False;110;0;0;00:00:00;01:19:29.6144251;01:19:29.6144251;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:48:46.3181341;00:00:00;02:00:00;00:04:06.1671033;01:05:53.8517890;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:53:21.4675561 [PrintingService.cs@1918] 07/18/2026 22:18:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=67.28571428571428,printChamber1=67.28571428571428,printChamber2=67.28571428571428,printChamber3=67.28571428571428,printChamber4=67.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:18:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:18:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:18:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:18:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:18:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:18:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:18:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:18:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:18:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=81.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:18:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 81.90468072891235. Used = 81.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:18:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 252.1552228, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.1706491653185527, Elapsed = 00:04:12.1734746, TimeTotal = 05:59:01.3363859, Remaining = 05:54:49.1629113, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:19:29.6144251, WeightTotalEstimate = 01:19:29.6144251, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:48:46.3181341, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:12.1734746, HeatingEstimate = 01:05:47.8447772, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:53:21.4675561, WeightEstimate = 01:19:29.6144251 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:13:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:18:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.1706491653185527;StartedAtUtc;00:04:12.1734746;05:59:01.3363859;05:54:49.1629113;False;110;0;0;00:00:00;01:19:29.6144251;01:19:29.6144251;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:48:46.3181341;00:00:00;02:00:00;00:04:12.1734746;01:05:47.8447772;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:53:21.4675561 [PrintingService.cs@1918] 07/18/2026 22:18:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=68.28571428571428,printChamber1=68.28571428571428,printChamber2=68.28571428571428,printChamber3=68.28571428571428,printChamber4=68.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:18:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:18:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:18:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:18:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:18:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:19:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9617396. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1885447. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:19:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:19:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:19:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=82.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:19:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 82.90468072891235. Used = 82.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:19:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 258.158539, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.198518178122017, Elapsed = 00:04:18.1768329, TimeTotal = 05:59:01.3364280, Remaining = 05:54:43.1595951, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:19:29.6144251, WeightTotalEstimate = 01:19:29.6144251, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:48:46.3181341, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:18.1768329, HeatingEstimate = 01:05:41.8414610, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:53:21.4675561, WeightEstimate = 01:19:29.6144251 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:13:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:19:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.198518178122017;StartedAtUtc;00:04:18.1768329;05:59:01.3364280;05:54:43.1595951;False;110;0;0;00:00:00;01:19:29.6144251;01:19:29.6144251;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:48:46.3181341;00:00:00;02:00:00;00:04:18.1768329;01:05:41.8414610;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:53:21.4675561 [PrintingService.cs@1918] 07/18/2026 22:19:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=69.28571428571428,printChamber1=69.28571428571428,printChamber2=69.28571428571428,printChamber3=69.28571428571428,printChamber4=69.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:19:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:19:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0809175 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:19:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=83.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:19:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 83.90468072891235. Used = 83.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:19:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 264.1586615, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.2263719646053899, Elapsed = 00:04:24.1769102, TimeTotal = 05:59:01.3363828, Remaining = 05:54:37.1594726, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:19:29.6144251, WeightTotalEstimate = 01:19:29.6144251, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:48:46.3181341, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:24.1769102, HeatingEstimate = 01:05:35.8413385, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:53:21.4675561, WeightEstimate = 01:19:29.6144251 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:13:44. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:19:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2263719646053899;StartedAtUtc;00:04:24.1769102;05:59:01.3363828;05:54:37.1594726;False;110;0;0;00:00:00;01:19:29.6144251;01:19:29.6144251;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:48:46.3181341;00:00:00;02:00:00;00:04:24.1769102;01:05:35.8413385;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:53:21.4675561 [PrintingService.cs@1918] 07/18/2026 22:19:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=70.28571428571428,printChamber1=70.28571428571428,printChamber2=70.28571428571428,printChamber3=70.28571428571428,printChamber4=70.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:19:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:19:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:19:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:19:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:19:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218842, estimate=67.20679637585219 for layer 8, Z=0.801 [PrintingService.cs@1524] 07/18/2026 22:19:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 8, island count 7 [PrintingService.cs@1569] 07/18/2026 22:19:13 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 9, start=0, count=110, Z=0.901 [PrintingService.cs@1518] 07/18/2026 22:19:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=84.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:19:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 84.90468072891235. Used = 84.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:19:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:19:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 270.1654838, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.2519924228760093, Elapsed = 00:04:30.1837333, TimeTotal = 05:59:40.3009957, Remaining = 05:55:10.1172624, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:08.5790372, WeightTotalEstimate = 01:20:08.5790372, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:25.2827462, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:30.1837333, HeatingEstimate = 01:05:29.8345162, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:00.4321682, WeightEstimate = 01:20:08.5790372 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:19:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.2519924228760093;StartedAtUtc;00:04:30.1837333;05:59:40.3009957;05:55:10.1172624;False;110;0;0;00:00:00;01:20:08.5790372;01:20:08.5790372;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:25.2827462;00:00:00;02:00:00;00:04:30.1837333;01:05:29.8345162;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:00.4321682 [PrintingService.cs@1918] 07/18/2026 22:19:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=71.28571428571428,printChamber1=71.28571428571428,printChamber2=71.28571428571428,printChamber3=71.28571428571428,printChamber4=71.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:19:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:19:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:16 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=86.44401550292969, Elapsed=00:00:27.4964729 [ControlledHeating.cs@486] 07/18/2026 22:19:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=85.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 85.90468072891235. Used = 85.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 276.1717559, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.27982462910038, Elapsed = 00:04:36.1900072, TimeTotal = 05:59:40.3009975, Remaining = 05:55:04.1109903, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:08.5790372, WeightTotalEstimate = 01:20:08.5790372, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:25.2827462, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:36.1900072, HeatingEstimate = 01:05:23.8282441, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:00.4321682, WeightEstimate = 01:20:08.5790372 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.27982462910038;StartedAtUtc;00:04:36.1900072;05:59:40.3009975;05:55:04.1109903;False;110;0;0;00:00:00;01:20:08.5790372;01:20:08.5790372;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:25.2827462;00:00:00;02:00:00;00:04:36.1900072;01:05:23.8282441;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:00.4321682 [PrintingService.cs@1918] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=72.28571428571428,printChamber1=72.28571428571428,printChamber2=72.28571428571428,printChamber3=72.28571428571428,printChamber4=72.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 86.69330596923828 after 00:00:30.4952738 [ControlledHeating.cs@493] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1997129. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0621817. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2619180. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2757799. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:19:19 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 171007482185 (171007482185 @ 0) for mcu = 1410.518783 [18/07/2026 21:18:25] (1425.0623515416667 sec) to 173419441902 (from now=173299441902, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 171007482185 (171007482185 @ 0) for mcu = 1410.518783 [18/07/2026 21:18:25] (1425.0623515416667 sec) to 173419441902 (from external timestamp, flags=None, requested=173419441902 (173419441902 @ 0) for mcu = 1430.618920 [18/07/2026 21:18:45] (1445.16201585 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 171007482185 (171007482185 @ 0) for mcu = 1410.518783 [18/07/2026 21:18:25] (1425.0623515416667 sec) to 173419441902 (from external timestamp, flags=None, requested=173419441902 (173419441902 @ 0) for mcu = 1430.618920 [18/07/2026 21:18:45] (1445.16201585 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:19:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=86.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:19:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 86.90468072891235. Used = 86.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:19:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 282.1766062, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.3076502276964295, Elapsed = 00:04:42.1948551, TimeTotal = 05:59:40.3009951, Remaining = 05:54:58.1061400, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:08.5790372, WeightTotalEstimate = 01:20:08.5790372, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:25.2827462, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:42.1948551, HeatingEstimate = 01:05:17.8233938, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:00.4321682, WeightEstimate = 01:20:08.5790372 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:19:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3076502276964295;StartedAtUtc;00:04:42.1948551;05:59:40.3009951;05:54:58.1061400;False;110;0;0;00:00:00;01:20:08.5790372;01:20:08.5790372;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:25.2827462;00:00:00;02:00:00;00:04:42.1948551;01:05:17.8233938;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:00.4321682 [PrintingService.cs@1918] 07/18/2026 22:19:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=73.28571428571428,printChamber1=73.28571428571428,printChamber2=73.28571428571428,printChamber3=73.28571428571428,printChamber4=73.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:19:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:19:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:19:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9853877. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3857904. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:19:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:19:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:19:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=87.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:19:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 87.90468072891235. Used = 87.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:19:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 288.1801013, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.3354696306217548, Elapsed = 00:04:48.1983662, TimeTotal = 05:59:40.3010111, Remaining = 05:54:52.1026449, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:08.5790372, WeightTotalEstimate = 01:20:08.5790372, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:25.2827462, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:48.1983662, HeatingEstimate = 01:05:11.8198987, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:00.4321682, WeightEstimate = 01:20:08.5790372 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:19:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3354696306217548;StartedAtUtc;00:04:48.1983662;05:59:40.3010111;05:54:52.1026449;False;110;0;0;00:00:00;01:20:08.5790372;01:20:08.5790372;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:25.2827462;00:00:00;02:00:00;00:04:48.1983662;01:05:11.8198987;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:00.4321682 [PrintingService.cs@1918] 07/18/2026 22:19:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=74.28571428571428,printChamber1=74.28571428571428,printChamber2=74.28571428571428,printChamber3=74.28571428571428,printChamber4=74.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:19:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:19:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=88.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:19:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 88.90468072891235. Used = 88.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:19:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 294.1825515, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.3632840466993998, Elapsed = 00:04:54.2008007, TimeTotal = 05:59:40.3009954, Remaining = 05:54:46.1001947, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:08.5790372, WeightTotalEstimate = 01:20:08.5790372, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:25.2827462, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:04:54.2008007, HeatingEstimate = 01:05:05.8174485, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:00.4321682, WeightEstimate = 01:20:08.5790372 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:19:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3632840466993998;StartedAtUtc;00:04:54.2008007;05:59:40.3009954;05:54:46.1001947;False;110;0;0;00:00:00;01:20:08.5790372;01:20:08.5790372;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:25.2827462;00:00:00;02:00:00;00:04:54.2008007;01:05:05.8174485;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:00.4321682 [PrintingService.cs@1918] 07/18/2026 22:19:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=75.28571428571428,printChamber1=75.28571428571428,printChamber2=75.28571428571428,printChamber3=75.28571428571428,printChamber4=75.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:19:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 40.25 [HeaterCheck.cs@67] 07/18/2026 22:19:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.75 [HeaterCheck.cs@67] 07/18/2026 22:19:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=89.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:19:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 89.90468072891235. Used = 89.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:19:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 300.1825474, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.3910891100749063, Elapsed = 00:05:00.2012230, TimeTotal = 05:59:40.3014218, Remaining = 05:54:40.1001988, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:08.5790372, WeightTotalEstimate = 01:20:08.5790372, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:25.2827462, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:00.2012230, HeatingEstimate = 01:04:59.8174526, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:00.4321682, WeightEstimate = 01:20:08.5790372 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:19:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.3910891100749063;StartedAtUtc;00:05:00.2012230;05:59:40.3014218;05:54:40.1001988;False;110;0;0;00:00:00;01:20:08.5790372;01:20:08.5790372;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:25.2827462;00:00:00;02:00:00;00:05:00.2012230;01:04:59.8174526;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:00.4321682 [PrintingService.cs@1918] 07/18/2026 22:19:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=76.28571428571428,printChamber1=76.28571428571428,printChamber2=76.28571428571428,printChamber3=76.28571428571428,printChamber4=76.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:19:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:19:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=91.87380981445312, Elapsed=00:00:27.2118011 [ControlledHeating.cs@486] 07/18/2026 22:19:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284027, estimate=76.16718698420429 for layer 9, Z=0.901 [PrintingService.cs@1524] 07/18/2026 22:19:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 9, island count 7 [PrintingService.cs@1569] 07/18/2026 22:19:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 10, start=0, count=110, Z=1.001 [PrintingService.cs@1518] 07/18/2026 22:19:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:19:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=90.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:19:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 90.90468072891235. Used = 90.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:19:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 306.188995, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.4180387973468351, Elapsed = 00:05:06.2073563, TimeTotal = 05:59:53.7220387, Remaining = 05:54:47.5146824, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:21.9999684, WeightTotalEstimate = 01:20:21.9999684, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:38.7036774, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:06.2073563, HeatingEstimate = 01:04:53.8110050, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:13.8530994, WeightEstimate = 01:20:21.9999684 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:19:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4180387973468351;StartedAtUtc;00:05:06.2073563;05:59:53.7220387;05:54:47.5146824;False;110;0;0;00:00:00;01:20:21.9999684;01:20:21.9999684;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:38.7036774;00:00:00;02:00:00;00:05:06.2073563;01:04:53.8110050;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:13.8530994 [PrintingService.cs@1918] 07/18/2026 22:19:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=77.28571428571428,printChamber1=77.28571428571428,printChamber2=77.28571428571428,printChamber3=77.28571428571428,printChamber4=77.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:19:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 91.5571517944336 after 00:00:30.2149286 [ControlledHeating.cs@493] 07/18/2026 22:19:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:19:49 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2887888. SinceCollect=00:01:00.7047912. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2674, gen1=271, gen2=40, LatencyMode=Interactive, FreeMemory=5966249984, Live=447063952, HeapSizeBytes=455244712, FragmentedBytes=8518400, TotalCommittedBytes=465911808, PinnedObjectsCount=24, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (2 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634209. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0626845. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0740096. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:19:50 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 174630963130 (174630963130 @ 0) for mcu = 1440.715182 [18/07/2026 21:18:55] (1455.2580260833333 sec) to 177079830097 (from now=176959830097, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 174630963130 (174630963130 @ 0) for mcu = 1440.715182 [18/07/2026 21:18:55] (1455.2580260833333 sec) to 177079830097 (from external timestamp, flags=None, requested=177079830097 (177079830097 @ 0) for mcu = 1461.122890 [18/07/2026 21:19:16] (1475.6652508083334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 174630963130 (174630963130 @ 0) for mcu = 1440.715182 [18/07/2026 21:18:55] (1455.2580260833333 sec) to 177079830097 (from external timestamp, flags=None, requested=177079830097 (177079830097 @ 0) for mcu = 1461.122890 [18/07/2026 21:19:16] (1475.6652508083334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:19:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:19:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:19:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 40.25 [HeaterCheck.cs@67] 07/18/2026 22:19:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:19:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 40 [HeaterCheck.cs@67] 07/18/2026 22:19:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:19:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:19:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=91.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:19:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 91.90468072891235. Used = 91.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:19:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 312.1960559, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.445856910778826, Elapsed = 00:05:12.2143210, TimeTotal = 05:59:53.7219425, Remaining = 05:54:41.5076215, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:21.9999684, WeightTotalEstimate = 01:20:21.9999684, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:38.7036774, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:12.2143210, HeatingEstimate = 01:04:47.8039441, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:13.8530994, WeightEstimate = 01:20:21.9999684 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:19:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.445856910778826;StartedAtUtc;00:05:12.2143210;05:59:53.7219425;05:54:41.5076215;False;110;0;0;00:00:00;01:20:21.9999684;01:20:21.9999684;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:38.7036774;00:00:00;02:00:00;00:05:12.2143210;01:04:47.8039441;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:13.8530994 [PrintingService.cs@1918] 07/18/2026 22:19:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=78.28571428571428,printChamber1=78.28571428571428,printChamber2=78.28571428571428,printChamber3=78.28571428571428,printChamber4=78.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:19:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.75 [HeaterCheck.cs@67] 07/18/2026 22:19:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:19:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:19:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:19:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:20:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:20:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9938838. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1849816. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:20:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:20:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:20:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=92.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:20:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 92.90468072891235. Used = 92.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:20:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 318.1983128, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.4736539608241126, Elapsed = 00:05:18.2167411, TimeTotal = 05:59:53.7221057, Remaining = 05:54:35.5053646, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:21.9999684, WeightTotalEstimate = 01:20:21.9999684, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:38.7036774, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:18.2167411, HeatingEstimate = 01:04:41.8016872, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:13.8530994, WeightEstimate = 01:20:21.9999684 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:20:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.4736539608241126;StartedAtUtc;00:05:18.2167411;05:59:53.7221057;05:54:35.5053646;False;110;0;0;00:00:00;01:20:21.9999684;01:20:21.9999684;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:38.7036774;00:00:00;02:00:00;00:05:18.2167411;01:04:41.8016872;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:13.8530994 [PrintingService.cs@1918] 07/18/2026 22:20:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=79.28571428571428,printChamber1=79.28571428571428,printChamber2=79.28571428571428,printChamber3=79.28571428571428,printChamber4=79.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:20:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:20:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:20:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:20:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 79.28571 with temperature 75 [HeaterCheck.cs@67] 07/18/2026 22:20:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 40 [HeaterCheck.cs@67] 07/18/2026 22:20:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1453274 ~ 6 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:20:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 43.285713 with temperature 28.5 [HeaterCheck.cs@111] 07/18/2026 22:20:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=93.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:20:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 93.90468072891235. Used = 93.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:20:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 324.1995636, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.5014448400183238, Elapsed = 00:05:24.2178238, TimeTotal = 05:59:53.7219376, Remaining = 05:54:29.5041138, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:21.9999684, WeightTotalEstimate = 01:20:21.9999684, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:38.7036774, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:24.2178238, HeatingEstimate = 01:04:35.8004364, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:13.8530994, WeightEstimate = 01:20:21.9999684 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:20:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5014448400183238;StartedAtUtc;00:05:24.2178238;05:59:53.7219376;05:54:29.5041138;False;110;0;0;00:00:00;01:20:21.9999684;01:20:21.9999684;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:38.7036774;00:00:00;02:00:00;00:05:24.2178238;01:04:35.8004364;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:13.8530994 [PrintingService.cs@1918] 07/18/2026 22:20:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=80.28571428571428,printChamber1=80.28571428571428,printChamber2=80.28571428571428,printChamber3=80.28571428571428,printChamber4=80.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:20:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:20:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 80.28571 with temperature 75.5 [HeaterCheck.cs@67] 07/18/2026 22:20:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:20:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:20:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 80.28571 with temperature 77.75 [HeaterCheck.cs@67] 07/18/2026 22:20:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 80.28571 with temperature 75.5 [HeaterCheck.cs@67] 07/18/2026 22:20:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=94.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:20:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 94.90468072891235. Used = 94.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:20:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 330.1994131, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.5292316348299775, Elapsed = 00:05:30.2180325, TimeTotal = 05:59:53.7222968, Remaining = 05:54:23.5042643, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:21.9999684, WeightTotalEstimate = 01:20:21.9999684, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:38.7036774, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:30.2180325, HeatingEstimate = 01:04:29.8005869, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:13.8530994, WeightEstimate = 01:20:21.9999684 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:20:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5292316348299775;StartedAtUtc;00:05:30.2180325;05:59:53.7222968;05:54:23.5042643;False;110;0;0;00:00:00;01:20:21.9999684;01:20:21.9999684;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:38.7036774;00:00:00;02:00:00;00:05:30.2180325;01:04:29.8005869;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:13.8530994 [PrintingService.cs@1918] 07/18/2026 22:20:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=81.28571428571428,printChamber1=81.28571428571428,printChamber2=81.28571428571428,printChamber3=81.28571428571428,printChamber4=81.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:20:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:20:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=92.75227355957031, Elapsed=00:00:27.4951966 [ControlledHeating.cs@486] 07/18/2026 22:20:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:20:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:20:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:20:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=95.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:20:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 95.90468072891235. Used = 95.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:20:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 336.1987763, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.5570128559924838, Elapsed = 00:05:36.2170265, TimeTotal = 05:59:53.7219276, Remaining = 05:54:17.5049011, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:21.9999684, WeightTotalEstimate = 01:20:21.9999684, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:38.7036774, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:36.2170265, HeatingEstimate = 01:04:23.8012237, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:13.8530994, WeightEstimate = 01:20:21.9999684 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:20:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5570128559924838;StartedAtUtc;00:05:36.2170265;05:59:53.7219276;05:54:17.5049011;False;110;0;0;00:00:00;01:20:21.9999684;01:20:21.9999684;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:38.7036774;00:00:00;02:00:00;00:05:36.2170265;01:04:23.8012237;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:13.8530994 [PrintingService.cs@1918] 07/18/2026 22:20:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=82.28571428571428,printChamber1=82.28571428571428,printChamber2=82.28571428571428,printChamber3=82.28571428571428,printChamber4=82.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 93.6625747680664 after 00:00:30.4951473 [ControlledHeating.cs@493] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2066775. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632330. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2718531. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2842469. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:20:20 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 178291351325 (178291351325 @ 0) for mcu = 1471.218985 [18/07/2026 21:19:26] (1485.7612610416666 sec) to 180704886348 (from now=180584886348, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 178291351325 (178291351325 @ 0) for mcu = 1471.218985 [18/07/2026 21:19:26] (1485.7612610416666 sec) to 180704886348 (from external timestamp, flags=None, requested=180704886348 (180704886348 @ 0) for mcu = 1491.332199 [18/07/2026 21:19:46] (1505.8740529 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 178291351325 (178291351325 @ 0) for mcu = 1471.218985 [18/07/2026 21:19:26] (1485.7612610416666 sec) to 180704886348 (from external timestamp, flags=None, requested=180704886348 (180704886348 @ 0) for mcu = 1491.332199 [18/07/2026 21:19:46] (1505.8740529 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:20:20 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:20:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.75 [HeaterCheck.cs@67] 07/18/2026 22:20:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218847, estimate=67.33740776314795 for layer 10, Z=1.001 [PrintingService.cs@1524] 07/18/2026 22:20:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 10, island count 7 [PrintingService.cs@1569] 07/18/2026 22:20:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 11, start=0, count=110, Z=1.1010001 [PrintingService.cs@1518] 07/18/2026 22:20:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:20:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:20:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.75 [HeaterCheck.cs@67] 07/18/2026 22:20:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=96.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:20:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 96.90468072891235. Used = 96.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:20:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 342.2011983, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.5834315126207217, Elapsed = 00:05:42.2197689, TimeTotal = 06:00:12.5399913, Remaining = 05:54:30.3202224, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:40.8177117, WeightTotalEstimate = 01:20:40.8177117, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:57.5214207, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:42.2197689, HeatingEstimate = 01:04:17.7988017, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:32.6708427, WeightEstimate = 01:20:40.8177117 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:56. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:20:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.5834315126207217;StartedAtUtc;00:05:42.2197689;06:00:12.5399913;05:54:30.3202224;False;110;0;0;00:00:00;01:20:40.8177117;01:20:40.8177117;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:57.5214207;00:00:00;02:00:00;00:05:42.2197689;01:04:17.7988017;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:32.6708427 [PrintingService.cs@1918] 07/18/2026 22:20:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=83.28571428571428,printChamber1=83.28571428571428,printChamber2=83.28571428571428,printChamber3=83.28571428571428,printChamber4=83.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:20:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:20:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:20:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:20:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=97.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:20:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11.0126797. Loops = 45. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3922197. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:20:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:20:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:20:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 97.90468072891235. Used = 97.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:20:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 348.2015522, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.6111960043364553, Elapsed = 00:05:48.2203850, TimeTotal = 06:00:12.5402535, Remaining = 05:54:24.3198685, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:40.8177117, WeightTotalEstimate = 01:20:40.8177117, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:57.5214207, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:48.2203850, HeatingEstimate = 01:04:11.7984478, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:32.6708427, WeightEstimate = 01:20:40.8177117 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:56. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:20:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6111960043364553;StartedAtUtc;00:05:48.2203850;06:00:12.5402535;05:54:24.3198685;False;110;0;0;00:00:00;01:20:40.8177117;01:20:40.8177117;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:57.5214207;00:00:00;02:00:00;00:05:48.2203850;01:04:11.7984478;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:32.6708427 [PrintingService.cs@1918] 07/18/2026 22:20:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=84.28571428571428,printChamber1=84.28571428571428,printChamber2=84.28571428571428,printChamber3=84.28571428571428,printChamber4=84.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:20:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:20:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:20:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:20:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:20:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=98.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:20:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 98.90468072891235. Used = 98.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:20:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 354.2082562, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.6389869856121884, Elapsed = 00:05:54.2267159, TimeTotal = 06:00:12.5398804, Remaining = 05:54:18.3131645, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:40.8177117, WeightTotalEstimate = 01:20:40.8177117, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:57.5214207, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:05:54.2267159, HeatingEstimate = 01:04:05.7917438, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:32.6708427, WeightEstimate = 01:20:40.8177117 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:56. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:20:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6389869856121884;StartedAtUtc;00:05:54.2267159;06:00:12.5398804;05:54:18.3131645;False;110;0;0;00:00:00;01:20:40.8177117;01:20:40.8177117;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:57.5214207;00:00:00;02:00:00;00:05:54.2267159;01:04:05.7917438;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:32.6708427 [PrintingService.cs@1918] 07/18/2026 22:20:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=85.28571428571428,printChamber1=85.28571428571428,printChamber2=85.28571428571428,printChamber3=85.28571428571428,printChamber4=85.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:20:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39 [HeaterCheck.cs@67] 07/18/2026 22:20:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:20:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:20:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:20:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=99.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:20:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 99.90468072891235. Used = 99.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:20:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 360.2066747, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.6667404088717506, Elapsed = 00:06:00.2249322, TimeTotal = 06:00:12.5396782, Remaining = 05:54:12.3147460, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:40.8177117, WeightTotalEstimate = 01:20:40.8177117, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:57.5214207, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:00.2249322, HeatingEstimate = 01:03:59.7933253, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:32.6708427, WeightEstimate = 01:20:40.8177117 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:56. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:20:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6667404088717506;StartedAtUtc;00:06:00.2249322;06:00:12.5396782;05:54:12.3147460;False;110;0;0;00:00:00;01:20:40.8177117;01:20:40.8177117;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:57.5214207;00:00:00;02:00:00;00:06:00.2249322;01:03:59.7933253;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:32.6708427 [PrintingService.cs@1918] 07/18/2026 22:20:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=86.28571428571428,printChamber1=86.28571428571428,printChamber2=86.28571428571428,printChamber3=86.28571428571428,printChamber4=86.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:20:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 39.25 [HeaterCheck.cs@67] 07/18/2026 22:20:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 40 [HeaterCheck.cs@67] 07/18/2026 22:20:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/18/2026 22:20:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/18/2026 22:20:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 22:20:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/18/2026 22:20:45 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/18/2026 22:20:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 22:20:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:47 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=98.82620239257812, Elapsed=00:00:27.2002649 [ControlledHeating.cs@486] 07/18/2026 22:20:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:20:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=100.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:20:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 100.90468072891235. Used = 100.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:20:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 366.2072415, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.6945048352523213, Elapsed = 00:06:06.2255304, TimeTotal = 06:00:12.5397096, Remaining = 05:54:06.3141792, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:40.8177117, WeightTotalEstimate = 01:20:40.8177117, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:57.5214207, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:06.2255304, HeatingEstimate = 01:03:53.7927585, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:32.6708427, WeightEstimate = 01:20:40.8177117 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:56. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:20:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.6945048352523213;StartedAtUtc;00:06:06.2255304;06:00:12.5397096;05:54:06.3141792;False;110;0;0;00:00:00;01:20:40.8177117;01:20:40.8177117;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:57.5214207;00:00:00;02:00:00;00:06:06.2255304;01:03:53.7927585;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:32.6708427 [PrintingService.cs@1918] 07/18/2026 22:20:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=87.28571428571428,printChamber1=87.28571428571428,printChamber2=87.28571428571428,printChamber3=87.28571428571428,printChamber4=87.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:20:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 98.83151245117188 after 00:00:30.2007431 [ControlledHeating.cs@493] 07/18/2026 22:20:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:20:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:20:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2907585. SinceCollect=00:01:00.7067962. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:20:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2825, gen1=290, gen2=41, LatencyMode=Interactive, FreeMemory=5931089920, Live=447404648, HeapSizeBytes=455177848, FragmentedBytes=8242120, TotalCommittedBytes=466173952, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:20:50 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:20:50 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:20:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0567458. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0659345. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:20:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:20:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0785096. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:20:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:20:51 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:20:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 181916407576 (181916407576 @ 0) for mcu = 1501.428395 [18/07/2026 21:19:56] (1515.9700631333333 sec) to 184364906023 (from now=184244906023, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:20:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 181916407576 (181916407576 @ 0) for mcu = 1501.428395 [18/07/2026 21:19:56] (1515.9700631333333 sec) to 184364906023 (from external timestamp, flags=None, requested=184364906023 (184364906023 @ 0) for mcu = 1521.832971 [18/07/2026 21:20:16] (1536.3742168583333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:20:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 181916407576 (181916407576 @ 0) for mcu = 1501.428395 [18/07/2026 21:19:56] (1515.9700631333333 sec) to 184364906023 (from external timestamp, flags=None, requested=184364906023 (184364906023 @ 0) for mcu = 1521.832971 [18/07/2026 21:20:16] (1536.3742168583333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:20:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:20:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 43.285713 with temperature 38.75 [HeaterCheck.cs@67] 07/18/2026 22:20:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 43.285713 with temperature 38.5 [HeaterCheck.cs@67] 07/18/2026 22:20:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 87.28571 with temperature 82.5 [HeaterCheck.cs@67] 07/18/2026 22:20:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=44.285714285714285,powderChamber1=44.285714285714285,powderChamber2=44.285714285714285,powderChamber3=44.285714285714285,powderChamber4=44.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:20:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] approaching new target of 44.285713 with temperature 39 [HeaterCheck.cs@88] 07/18/2026 22:20:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=101.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:20:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 101.90468072891235. Used = 101.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:20:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 372.2136155, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.7222961966188912, Elapsed = 00:06:12.2319502, TimeTotal = 06:00:12.5397554, Remaining = 05:54:00.3078052, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:20:40.8177117, WeightTotalEstimate = 01:20:40.8177117, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:49:57.5214207, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:12.2319502, HeatingEstimate = 01:03:47.7863845, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:54:32.6708427, WeightEstimate = 01:20:40.8177117 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:14:56. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:20:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7222961966188912;StartedAtUtc;00:06:12.2319502;06:00:12.5397554;05:54:00.3078052;False;110;0;0;00:00:00;01:20:40.8177117;01:20:40.8177117;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:49:57.5214207;00:00:00;02:00:00;00:06:12.2319502;01:03:47.7863845;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:54:32.6708427 [PrintingService.cs@1918] 07/18/2026 22:20:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=88.28571428571428,printChamber1=88.28571428571428,printChamber2=88.28571428571428,printChamber3=88.28571428571428,printChamber4=88.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:20:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 88.28571 with temperature 83 [HeaterCheck.cs@88] 07/18/2026 22:20:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 44.285713 with temperature 41.75 [HeaterCheck.cs@67] 07/18/2026 22:20:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 44.285713 with temperature 41.75 [HeaterCheck.cs@67] 07/18/2026 22:20:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284028, estimate=76.15539098864049 for layer 11, Z=1.1010001 [PrintingService.cs@1524] 07/18/2026 22:20:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 11, island count 7 [PrintingService.cs@1569] 07/18/2026 22:20:57 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 12, start=0, count=110, Z=1.2010001 [PrintingService.cs@1518] 07/18/2026 22:20:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:20:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 44.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:20:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 44.285713 with temperature 40 [HeaterCheck.cs@67] 07/18/2026 22:21:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 44.285713 with temperature 39.5 [HeaterCheck.cs@67] 07/18/2026 22:21:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 88.28571 with temperature 84 [HeaterCheck.cs@67] 07/18/2026 22:21:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 88.28571 with temperature 83.5 [HeaterCheck.cs@67] 07/18/2026 22:21:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=45.285714285714285,powderChamber1=45.285714285714285,powderChamber2=45.285714285714285,powderChamber3=45.285714285714285,powderChamber4=45.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:21:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=102.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:21:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 102.90468072891235. Used = 102.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:21:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 378.2175103, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.7415657721052933, Elapsed = 00:06:18.2357973, TimeTotal = 06:01:58.1460131, Remaining = 05:55:39.9102158, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:22:26.4240171, WeightTotalEstimate = 01:22:26.4240171, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:51:43.1277261, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:18.2357973, HeatingEstimate = 01:03:41.7824897, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:56:18.2771481, WeightEstimate = 01:22:26.4240171 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:16:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:21:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7415657721052933;StartedAtUtc;00:06:18.2357973;06:01:58.1460131;05:55:39.9102158;False;110;0;0;00:00:00;01:22:26.4240171;01:22:26.4240171;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:51:43.1277261;00:00:00;02:00:00;00:06:18.2357973;01:03:41.7824897;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:56:18.2771481 [PrintingService.cs@1918] 07/18/2026 22:21:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=89.28571428571428,printChamber1=89.28571428571428,printChamber2=89.28571428571428,printChamber3=89.28571428571428,printChamber4=89.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:21:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9684404. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1871294. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:21:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:21:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:21:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 45.285713 with temperature 42 [HeaterCheck.cs@67] 07/18/2026 22:21:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 89.28571 with temperature 84.5 [HeaterCheck.cs@67] 07/18/2026 22:21:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0950405 ~ 6.01 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:21:06 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=30.75 that are outside of set tolerance 10 for current step target 45.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:21:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=103.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:21:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 103.90468072891235. Used = 103.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:21:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 384.2190427, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.7691993752083714, Elapsed = 00:06:24.2373031, TimeTotal = 06:01:58.1459865, Remaining = 05:55:33.9086834, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:22:26.4240171, WeightTotalEstimate = 01:22:26.4240171, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:51:43.1277261, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:24.2373031, HeatingEstimate = 01:03:35.7809573, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:56:18.2771481, WeightEstimate = 01:22:26.4240171 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:16:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:21:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7691993752083714;StartedAtUtc;00:06:24.2373031;06:01:58.1459865;05:55:33.9086834;False;110;0;0;00:00:00;01:22:26.4240171;01:22:26.4240171;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:51:43.1277261;00:00:00;02:00:00;00:06:24.2373031;01:03:35.7809573;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:56:18.2771481 [PrintingService.cs@1918] 07/18/2026 22:21:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=90.28571428571428,printChamber1=90.28571428571428,printChamber2=90.28571428571428,printChamber3=90.28571428571428,printChamber4=90.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:21:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 90.28571 with temperature 84.5 [HeaterCheck.cs@88] 07/18/2026 22:21:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 90.28571 with temperature 85.5 [HeaterCheck.cs@67] 07/18/2026 22:21:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 90.28571 with temperature 85.75 [HeaterCheck.cs@67] 07/18/2026 22:21:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 90.28571 with temperature 85.5 [HeaterCheck.cs@67] 07/18/2026 22:21:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 45.285713 with temperature 41.25 [HeaterCheck.cs@67] 07/18/2026 22:21:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 90.28571 with temperature 86.25 [HeaterCheck.cs@67] 07/18/2026 22:21:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=104.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:21:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 104.90468072891235. Used = 104.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:21:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 390.2251679, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.7968541971153318, Elapsed = 00:06:30.2434175, TimeTotal = 06:01:58.1459757, Remaining = 05:55:27.9025582, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:22:26.4240171, WeightTotalEstimate = 01:22:26.4240171, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:51:43.1277261, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:30.2434175, HeatingEstimate = 01:03:29.7748321, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:56:18.2771481, WeightEstimate = 01:22:26.4240171 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:16:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:21:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.7968541971153318;StartedAtUtc;00:06:30.2434175;06:01:58.1459757;05:55:27.9025582;False;110;0;0;00:00:00;01:22:26.4240171;01:22:26.4240171;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:51:43.1277261;00:00:00;02:00:00;00:06:30.2434175;01:03:29.7748321;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:56:18.2771481 [PrintingService.cs@1918] 07/18/2026 22:21:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=91.28571428571428,printChamber1=91.28571428571428,printChamber2=91.28571428571428,printChamber3=91.28571428571428,printChamber4=91.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:21:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 91.28571 with temperature 86.25 [HeaterCheck.cs@88] 07/18/2026 22:21:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 91.28571 with temperature 86.5 [HeaterCheck.cs@67] 07/18/2026 22:21:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 45.285713 with temperature 41.5 [HeaterCheck.cs@67] 07/18/2026 22:21:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:21:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=104.35688781738281, Elapsed=00:00:27.5090954 [ControlledHeating.cs@486] 07/18/2026 22:21:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=105.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:21:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 105.90468072891235. Used = 105.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:21:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 396.2264693, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.8244868542383739, Elapsed = 00:06:36.2447183, TimeTotal = 06:01:58.1459751, Remaining = 05:55:21.9012568, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:22:26.4240171, WeightTotalEstimate = 01:22:26.4240171, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:51:43.1277261, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:06:36.2447183, HeatingEstimate = 01:03:23.7735307, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:56:18.2771481, WeightEstimate = 01:22:26.4240171 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:16:41. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:21:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.8244868542383739;StartedAtUtc;00:06:36.2447183;06:01:58.1459751;05:55:21.9012568;False;110;0;0;00:00:00;01:22:26.4240171;01:22:26.4240171;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:51:43.1277261;00:00:00;02:00:00;00:06:36.2447183;01:03:23.7735307;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:56:18.2771481 [PrintingService.cs@1918] 07/18/2026 22:21:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=92.28571428571428,printChamber1=92.28571428571428,printChamber2=92.28571428571428,printChamber3=92.28571428571428,printChamber4=92.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:21:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:21:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 105.60652923583984 after 00:00:30.5066607 [ControlledHeating.cs@493] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2079078. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633956. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2727947. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2853957. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:21:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 185576427251 (185576427251 @ 0) for mcu = 1531.929095 [18/07/2026 21:20:26] (1546.4702270916666 sec) to 187989687206 (from now=187869687206, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 185576427251 (185576427251 @ 0) for mcu = 1531.929095 [18/07/2026 21:20:26] (1546.4702270916666 sec) to 187989687206 (from external timestamp, flags=None, requested=187989687206 (187989687206 @ 0) for mcu = 1552.039979 [18/07/2026 21:20:47] (1566.5807267166667 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 185576427251 (185576427251 @ 0) for mcu = 1531.929095 [18/07/2026 21:20:26] (1546.4702270916666 sec) to 187989687206 (from external timestamp, flags=None, requested=187989687206 (187989687206 @ 0) for mcu = 1552.039979 [18/07/2026 21:20:47] (1566.5807267166667 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:21:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:21:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=106.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:21:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 106.90468072891235. Used = 106.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:21:25 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=81.25,printChamber4=81.75 that are outside of set tolerance 10 for current step target 92.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:21:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218843, estimate=67.17858071780434 for layer 12, Z=1.2010001 [PrintingService.cs@1524] 07/18/2026 22:21:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 12, island count 7 [PrintingService.cs@1569] 07/18/2026 22:21:27 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 13, start=0, count=110, Z=1.3010001 [PrintingService.cs@1518] 07/18/2026 22:21:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:21:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:21:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=107.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:21:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 107.90468072891235. Used = 107.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:21:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9790691. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3942575. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:21:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:21:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:21:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=108.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:21:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 108.90468072891235. Used = 108.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:21:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 42 [HeaterCheck.cs@67] 07/18/2026 22:21:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:21:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=109.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:21:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 109.90468072891235. Used = 109.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:21:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 92.28571 with temperature 87.32142639160156 [HeaterCheck.cs@67] 07/18/2026 22:21:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=108.9054183959961, Elapsed=00:00:27.2140877 [ControlledHeating.cs@486] 07/18/2026 22:21:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:21:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 425.2321669, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.9562890335185281, Elapsed = 00:07:05.2504194, TimeTotal = 06:02:17.6068727, Remaining = 05:55:12.3564533, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:22:45.8849112, WeightTotalEstimate = 01:22:45.8849112, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:52:02.5886202, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:05.2504194, HeatingEstimate = 01:02:54.7678331, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:56:37.7380422, WeightEstimate = 01:22:45.8849112 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:17:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:21:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.9562890335185281;StartedAtUtc;00:07:05.2504194;06:02:17.6068727;05:55:12.3564533;False;110;0;0;00:00:00;01:22:45.8849112;01:22:45.8849112;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:52:02.5886202;00:00:00;02:00:00;00:07:05.2504194;01:02:54.7678331;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:56:37.7380422 [PrintingService.cs@1918] 07/18/2026 22:21:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=93.28571428571428,printChamber1=93.28571428571428,printChamber2=93.28571428571428,printChamber3=93.28571428571428,printChamber4=93.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:21:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=110.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:21:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 110.90468072891235. Used = 110.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 110.30204772949219 after 00:00:30.2151159 [ControlledHeating.cs@493] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2903345. SinceCollect=00:01:00.7140753. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=2963, gen1=297, gen2=42, LatencyMode=Interactive, FreeMemory=5951930368, Live=447208184, HeapSizeBytes=455163560, FragmentedBytes=8061240, TotalCommittedBytes=466173952, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (2 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0611918. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0710870. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0850735. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:21:51 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 189201208434 (189201208434 @ 0) for mcu = 1562.136013 [18/07/2026 21:20:57] (1576.67673695 sec) to 191651303026 (from now=191531303026, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 189201208434 (189201208434 @ 0) for mcu = 1562.136013 [18/07/2026 21:20:57] (1576.67673695 sec) to 191651303026 (from external timestamp, flags=None, requested=191651303026 (191651303026 @ 0) for mcu = 1582.553798 [18/07/2026 21:21:17] (1597.0941918833332 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 189201208434 (189201208434 @ 0) for mcu = 1562.136013 [18/07/2026 21:20:57] (1576.67673695 sec) to 191651303026 (from external timestamp, flags=None, requested=191651303026 (191651303026 @ 0) for mcu = 1582.553798 [18/07/2026 21:21:17] (1597.0941918833332 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:21:51 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:21:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:21:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:21:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 45.285713 with temperature 31.75 [HeaterCheck.cs@111] 07/18/2026 22:21:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=83.25,printChamber4=82.75 that are outside of set tolerance 10 for current step target 93.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:21:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=111.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:21:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 111.90468072891235. Used = 111.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:21:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 434.2428401, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 1.997741852731165, Elapsed = 00:07:14.2612739, TimeTotal = 06:02:17.6070540, Remaining = 05:55:03.3457801, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:22:45.8849112, WeightTotalEstimate = 01:22:45.8849112, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:52:02.5886202, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:07:14.2612739, HeatingEstimate = 01:02:45.7571599, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:56:37.7380422, WeightEstimate = 01:22:45.8849112 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:17:01. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:21:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 1.997741852731165;StartedAtUtc;00:07:14.2612739;06:02:17.6070540;05:55:03.3457801;False;110;0;0;00:00:00;01:22:45.8849112;01:22:45.8849112;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:52:02.5886202;00:00:00;02:00:00;00:07:14.2612739;01:02:45.7571599;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:56:37.7380422 [PrintingService.cs@1918] 07/18/2026 22:21:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=94.28571428571428,printChamber1=94.28571428571428,printChamber2=94.28571428571428,printChamber3=94.28571428571428,printChamber4=94.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:21:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 94.28571 with temperature 89.25 [HeaterCheck.cs@88] 07/18/2026 22:22:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 94.28571 with temperature 89.5 [HeaterCheck.cs@67] 07/18/2026 22:22:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=112.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:22:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 112.90468072891235. Used = 112.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:22:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 94.28571 with temperature 90.25 [HeaterCheck.cs@67] 07/18/2026 22:22:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284029, estimate=76.02336310449758 for layer 13, Z=1.3010001 [PrintingService.cs@1524] 07/18/2026 22:22:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 13, island count 7 [PrintingService.cs@1569] 07/18/2026 22:22:02 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 14, start=0, count=110, Z=1.401 [PrintingService.cs@1518] 07/18/2026 22:22:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9996019. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1929622. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:22:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:22:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:22:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:22:03 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=83.5 that are outside of set tolerance 10 for current step target 94.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:22:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:22:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0274339 ~ 5.98 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:22:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=113.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:22:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 113.90468072891235. Used = 113.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:22:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:22:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 94.28571 with temperature 89.5 [HeaterCheck.cs@67] 07/18/2026 22:22:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 94.28571 with temperature 89.5 [HeaterCheck.cs@67] 07/18/2026 22:22:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=114.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:22:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 114.90468072891235. Used = 114.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:22:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 94.28571 with temperature 90 [HeaterCheck.cs@67] 07/18/2026 22:22:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:18 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=114.89009857177734, Elapsed=00:00:27.5060872 [ControlledHeating.cs@486] 07/18/2026 22:22:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=115.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:22:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 115.90468072891235. Used = 115.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:22:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 94.28571 with temperature 89.5 [HeaterCheck.cs@67] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 116.1458740234375 after 00:00:30.5047371 [ControlledHeating.cs@493] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2122223. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634262. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2786349. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2890599. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:22:21 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 192862824254 (192862824254 @ 0) for mcu = 1592.649999 [18/07/2026 21:21:27] (1607.1902021166666 sec) to 195275741809 (from now=195155741809, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 192862824254 (192862824254 @ 0) for mcu = 1592.649999 [18/07/2026 21:21:27] (1607.1902021166666 sec) to 195275741809 (from external timestamp, flags=None, requested=195275741809 (195275741809 @ 0) for mcu = 1612.757979 [18/07/2026 21:21:47] (1627.2978484083333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 192862824254 (192862824254 @ 0) for mcu = 1592.649999 [18/07/2026 21:21:27] (1607.1902021166666 sec) to 195275741809 (from external timestamp, flags=None, requested=195275741809 (195275741809 @ 0) for mcu = 1612.757979 [18/07/2026 21:21:47] (1627.2978484083333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:22:21 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:22:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 94.28571 with temperature 89.75 [HeaterCheck.cs@67] 07/18/2026 22:22:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:22:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 94.28571 with temperature 90 [HeaterCheck.cs@67] 07/18/2026 22:22:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=116.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:22:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 116.90468072891235. Used = 116.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:22:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:22:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41.25 [HeaterCheck.cs@67] 07/18/2026 22:22:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41.25 [HeaterCheck.cs@67] 07/18/2026 22:22:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:22:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 45.285713 with temperature 40.35714340209961 [HeaterCheck.cs@67] 07/18/2026 22:22:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:22:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=117.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:22:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 117.90468072891235. Used = 117.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:22:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9843417. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3971143. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:22:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:22:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:22:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 94.28571 with temperature 90.25 [HeaterCheck.cs@67] 07/18/2026 22:22:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41.25 [HeaterCheck.cs@67] 07/18/2026 22:22:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:22:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218846, estimate=67.22181375433733 for layer 14, Z=1.401 [PrintingService.cs@1524] 07/18/2026 22:22:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 14, island count 7 [PrintingService.cs@1569] 07/18/2026 22:22:36 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 15, start=0, count=110, Z=1.501 [PrintingService.cs@1518] 07/18/2026 22:22:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:22:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=118.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:22:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 118.90468072891235. Used = 118.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:22:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=119.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:22:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 119.90468072891235. Used = 119.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:22:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 41.5 [HeaterCheck.cs@67] 07/18/2026 22:22:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 94.28571 with temperature 91 [HeaterCheck.cs@67] 07/18/2026 22:22:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 94.28571 with temperature 89.5 [HeaterCheck.cs@67] 07/18/2026 22:22:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] no longer approaching new target of 94.28571 with temperature 78.42857360839844 [HeaterCheck.cs@111] 07/18/2026 22:22:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=119.7145004272461, Elapsed=00:00:27.2163334 [ControlledHeating.cs@486] 07/18/2026 22:22:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=120.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:22:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 120.90468072891235. Used = 120.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:22:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 42.75 [HeaterCheck.cs@67] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 121.3512954711914 after 00:00:30.2161625 [ControlledHeating.cs@493] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (3 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2960154. SinceCollect=00:01:00.7304341. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3106, gen1=311, gen2=43, LatencyMode=Interactive, FreeMemory=5943738368, Live=447750664, HeapSizeBytes=455233264, FragmentedBytes=8106736, TotalCommittedBytes=466173952, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0619721. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0738414. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0895273. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:22:52 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 196487263037 (196487263037 @ 0) for mcu = 1622.854081 [18/07/2026 21:21:57] (1637.3938586416666 sec) to 198939415908 (from now=198819415908, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 196487263037 (196487263037 @ 0) for mcu = 1622.854081 [18/07/2026 21:21:57] (1637.3938586416666 sec) to 198939415908 (from external timestamp, flags=None, requested=198939415908 (198939415908 @ 0) for mcu = 1643.289003 [18/07/2026 21:22:18] (1657.8284659 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 196487263037 (196487263037 @ 0) for mcu = 1622.854081 [18/07/2026 21:21:57] (1637.3938586416666 sec) to 198939415908 (from external timestamp, flags=None, requested=198939415908 (198939415908 @ 0) for mcu = 1643.289003 [18/07/2026 21:22:18] (1657.8284659 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:22:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 41.25 [HeaterCheck.cs@67] 07/18/2026 22:22:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:22:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 94.28571 with temperature 89.75 [HeaterCheck.cs@67] 07/18/2026 22:22:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=121.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:22:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 121.90468072891235. Used = 121.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:22:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 45.285713 with temperature 32.75 [HeaterCheck.cs@111] 07/18/2026 22:22:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:22:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 45.285713 with temperature 37.5 [HeaterCheck.cs@111] 07/18/2026 22:22:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 94.28571 with temperature 89.5 [HeaterCheck.cs@67] 07/18/2026 22:22:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41.5 [HeaterCheck.cs@67] 07/18/2026 22:23:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:23:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=122.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:23:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 122.90468072891235. Used = 122.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:23:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 499.2615338, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 2.294758538527613, Elapsed = 00:08:19.2797824, TimeTotal = 06:02:37.3994831, Remaining = 05:54:18.1197007, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:23:05.6775255, WeightTotalEstimate = 01:23:05.6775255, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:52:22.3812345, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:19.2797824, HeatingEstimate = 01:01:40.7384662, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:56:57.5306565, WeightEstimate = 01:23:05.6775255 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:17:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:23:02 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.294758538527613;StartedAtUtc;00:08:19.2797824;06:02:37.3994831;05:54:18.1197007;False;110;0;0;00:00:00;01:23:05.6775255;01:23:05.6775255;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:52:22.3812345;00:00:00;02:00:00;00:08:19.2797824;01:01:40.7384662;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:56:57.5306565 [PrintingService.cs@1918] 07/18/2026 22:23:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=95.28571428571428,printChamber1=95.28571428571428,printChamber2=95.28571428571428,printChamber3=95.28571428571428,printChamber4=95.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:23:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:23:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9948355. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1978271. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:23:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:23:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:23:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:23:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284021, estimate=76.14331028007814 for layer 15, Z=1.501 [PrintingService.cs@1524] 07/18/2026 22:23:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 15, island count 7 [PrintingService.cs@1569] 07/18/2026 22:23:05 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 16, start=0, count=110, Z=1.6010001 [PrintingService.cs@1518] 07/18/2026 22:23:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:23:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1050484 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:23:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:23:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=123.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:23:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 123.90468072891235. Used = 123.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:23:08 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=84.39286041259766 that are outside of set tolerance 10 for current step target 95.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:23:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 95.28571 with temperature 90.39286041259766 [HeaterCheck.cs@67] 07/18/2026 22:23:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 506.2624438, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 2.326944294621016, Elapsed = 00:08:26.2807043, TimeTotal = 06:02:37.3194799, Remaining = 05:54:11.0387756, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:23:05.5975104, WeightTotalEstimate = 01:23:05.5975104, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:52:22.3012194, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:26.2807043, HeatingEstimate = 01:01:33.7375562, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:56:57.4506414, WeightEstimate = 01:23:05.5975104 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:17:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:23:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.326944294621016;StartedAtUtc;00:08:26.2807043;06:02:37.3194799;05:54:11.0387756;False;110;0;0;00:00:00;01:23:05.5975104;01:23:05.5975104;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:52:22.3012194;00:00:00;02:00:00;00:08:26.2807043;01:01:33.7375562;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:56:57.4506414 [PrintingService.cs@1918] 07/18/2026 22:23:09 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=96.28571428571428,printChamber1=96.28571428571428,printChamber2=96.28571428571428,printChamber3=96.28571428571428,printChamber4=96.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:23:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 96.28571 with temperature 90.67857360839844 [HeaterCheck.cs@88] 07/18/2026 22:23:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 96.28571 with temperature 91.28571319580078 [HeaterCheck.cs@67] 07/18/2026 22:23:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:23:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=124.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:23:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 124.90468072891235. Used = 124.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:23:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:23:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 512.2764807, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 2.354585705010433, Elapsed = 00:08:32.2947341, TimeTotal = 06:02:37.3194728, Remaining = 05:54:05.0247387, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:23:05.5975104, WeightTotalEstimate = 01:23:05.5975104, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:52:22.3012194, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:32.2947341, HeatingEstimate = 01:01:27.7235193, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:56:57.4506414, WeightEstimate = 01:23:05.5975104 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:17:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:23:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.354585705010433;StartedAtUtc;00:08:32.2947341;06:02:37.3194728;05:54:05.0247387;False;110;0;0;00:00:00;01:23:05.5975104;01:23:05.5975104;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:52:22.3012194;00:00:00;02:00:00;00:08:32.2947341;01:01:27.7235193;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:56:57.4506414 [PrintingService.cs@1918] 07/18/2026 22:23:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=97.28571428571428,printChamber1=97.28571428571428,printChamber2=97.28571428571428,printChamber3=97.28571428571428,printChamber4=97.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:23:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:23:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:23:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 97.28571 with temperature 92.75 [HeaterCheck.cs@67] 07/18/2026 22:23:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 97.28571 with temperature 92.5 [HeaterCheck.cs@67] 07/18/2026 22:23:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:23:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=124.685302734375, Elapsed=00:00:27.5371287 [ControlledHeating.cs@486] 07/18/2026 22:23:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=125.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:23:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 125.90468072891235. Used = 125.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:23:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 97.28571 with temperature 92.5 [HeaterCheck.cs@67] 07/18/2026 22:23:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:23:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:23:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 97.28571 with temperature 92.75 [HeaterCheck.cs@67] 07/18/2026 22:23:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 518.2752463, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 2.38215718908359, Elapsed = 00:08:38.2935512, TimeTotal = 06:02:37.3195243, Remaining = 05:53:59.0259731, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:23:05.5975104, WeightTotalEstimate = 01:23:05.5975104, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:52:22.3012194, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:38.2935512, HeatingEstimate = 01:01:21.7247537, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:56:57.4506414, WeightEstimate = 01:23:05.5975104 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:17:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:23:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.38215718908359;StartedAtUtc;00:08:38.2935512;06:02:37.3195243;05:53:59.0259731;False;110;0;0;00:00:00;01:23:05.5975104;01:23:05.5975104;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:52:22.3012194;00:00:00;02:00:00;00:08:38.2935512;01:01:21.7247537;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:56:57.4506414 [PrintingService.cs@1918] 07/18/2026 22:23:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=98.28571428571428,printChamber1=98.28571428571428,printChamber2=98.28571428571428,printChamber3=98.28571428571428,printChamber4=98.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] approaching new target of 98.28571 with temperature 93 [HeaterCheck.cs@88] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 125.71985626220703 after 00:00:30.5391174 [ControlledHeating.cs@493] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2382420. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633798. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3030879. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3175128. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:23:22 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 200150937136 (200150937136 @ 0) for mcu = 1653.385148 [18/07/2026 21:22:28] (1667.9244761333334 sec) to 202566682245 (from now=202446682245, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 200150937136 (200150937136 @ 0) for mcu = 1653.385148 [18/07/2026 21:22:28] (1667.9244761333334 sec) to 202566682245 (from external timestamp, flags=None, requested=202566682245 (202566682245 @ 0) for mcu = 1673.516658 [18/07/2026 21:22:48] (1688.055685375 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 200150937136 (200150937136 @ 0) for mcu = 1653.385148 [18/07/2026 21:22:28] (1667.9244761333334 sec) to 202566682245 (from external timestamp, flags=None, requested=202566682245 (202566682245 @ 0) for mcu = 1673.516658 [18/07/2026 21:22:48] (1688.055685375 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:23:22 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:23:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 98.28571 with temperature 93.75 [HeaterCheck.cs@67] 07/18/2026 22:23:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 98.28571 with temperature 93.5 [HeaterCheck.cs@67] 07/18/2026 22:23:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 98.28571 with temperature 93.75 [HeaterCheck.cs@67] 07/18/2026 22:23:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=126.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:23:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 126.90468072891235. Used = 126.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:23:27 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=88.25 that are outside of set tolerance 10 for current step target 98.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:23:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:23:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:23:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=127.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:23:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 127.90468072891235. Used = 127.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:23:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 530.2759573, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 2.4373140492964316, Elapsed = 00:08:50.2942041, TimeTotal = 06:02:37.3194662, Remaining = 05:53:47.0252621, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:23:05.5975104, WeightTotalEstimate = 01:23:05.5975104, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:52:22.3012194, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:50.2942041, HeatingEstimate = 01:01:09.7240427, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:56:57.4506414, WeightEstimate = 01:23:05.5975104 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:17:20. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:23:33 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.4373140492964316;StartedAtUtc;00:08:50.2942041;06:02:37.3194662;05:53:47.0252621;False;110;0;0;00:00:00;01:23:05.5975104;01:23:05.5975104;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:52:22.3012194;00:00:00;02:00:00;00:08:50.2942041;01:01:09.7240427;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:56:57.4506414 [PrintingService.cs@1918] 07/18/2026 22:23:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=99.28571428571428,printChamber1=99.28571428571428,printChamber2=99.28571428571428,printChamber3=99.28571428571428,printChamber4=99.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:23:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4231430. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:23:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:23:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:23:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 99.28571 with temperature 93.75 [HeaterCheck.cs@88] 07/18/2026 22:23:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218847, estimate=67.24417842303735 for layer 16, Z=1.6010001 [PrintingService.cs@1524] 07/18/2026 22:23:36 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 16, island count 7 [PrintingService.cs@1569] 07/18/2026 22:23:36 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 17, start=0, count=110, Z=1.7010001 [PrintingService.cs@1518] 07/18/2026 22:23:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:23:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=128.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:23:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 128.90468072891235. Used = 128.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:23:39 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=88.5 that are outside of set tolerance 10 for current step target 99.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:23:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 538.2742887, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 2.4721340497593585, Elapsed = 00:08:58.2925449, TimeTotal = 06:02:54.4076197, Remaining = 05:53:56.1150748, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:23:22.6856545, WeightTotalEstimate = 01:23:22.6856545, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:52:39.3893635, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:08:58.2925449, HeatingEstimate = 01:01:01.7257113, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:57:14.5387855, WeightEstimate = 01:23:22.6856545 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:17:37. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:23:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.4721340497593585;StartedAtUtc;00:08:58.2925449;06:02:54.4076197;05:53:56.1150748;False;110;0;0;00:00:00;01:23:22.6856545;01:23:22.6856545;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:52:39.3893635;00:00:00;02:00:00;00:08:58.2925449;01:01:01.7257113;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:57:14.5387855 [PrintingService.cs@1918] 07/18/2026 22:23:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=100.28571428571428,printChamber1=100.28571428571428,printChamber2=100.28571428571428,printChamber3=100.28571428571428,printChamber4=100.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:23:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 100.28571 with temperature 95.17857360839844 [HeaterCheck.cs@88] 07/18/2026 22:23:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=129.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:23:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 129.90468072891235. Used = 129.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:23:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=89.5,printChamber3=89.75 that are outside of set tolerance 10 for current step target 100.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:23:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 41.75 [HeaterCheck.cs@67] 07/18/2026 22:23:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=130.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:23:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 130.90468072891235. Used = 130.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:23:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=130.04478454589844, Elapsed=00:00:27.1986941 [ControlledHeating.cs@486] 07/18/2026 22:23:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:23:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 42.25 [HeaterCheck.cs@67] 07/18/2026 22:23:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 130.9836883544922 after 00:00:30.1960997 [ControlledHeating.cs@493] 07/18/2026 22:23:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:23:52 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2890263. SinceCollect=00:01:00.7230204. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3234, gen1=323, gen2=44, LatencyMode=Interactive, FreeMemory=5927108608, Live=448944496, HeapSizeBytes=456396664, FragmentedBytes=8031000, TotalCommittedBytes=466698240, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632893. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0653585. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0796408. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:23:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:23:53 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:23:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 203778203473 (203778203473 @ 0) for mcu = 1683.612768 [18/07/2026 21:22:58] (1698.1516956083333 sec) to 206224922440 (from now=206104922440, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:23:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 203778203473 (203778203473 @ 0) for mcu = 1683.612768 [18/07/2026 21:22:58] (1698.1516956083333 sec) to 206224922440 (from external timestamp, flags=None, requested=206224922440 (206224922440 @ 0) for mcu = 1704.002380 [18/07/2026 21:23:18] (1718.5410203333333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:23:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 203778203473 (203778203473 @ 0) for mcu = 1683.612768 [18/07/2026 21:22:58] (1698.1516956083333 sec) to 206224922440 (from external timestamp, flags=None, requested=206224922440 (206224922440 @ 0) for mcu = 1704.002380 [18/07/2026 21:23:18] (1718.5410203333333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:23:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:23:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=131.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:23:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 131.90468072891235. Used = 131.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:23:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 45.285713 with temperature 36 [HeaterCheck.cs@111] 07/18/2026 22:23:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:24:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 45.285713 with temperature 42.25 [HeaterCheck.cs@67] 07/18/2026 22:24:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=132.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:24:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 132.90468072891235. Used = 132.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:24:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:24:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 100.28571 with temperature 95.5 [HeaterCheck.cs@67] 07/18/2026 22:24:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:24:04 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9781435. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1872927. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:24:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:24:04 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:24:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 100.28571 with temperature 95.75 [HeaterCheck.cs@67] 07/18/2026 22:24:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:24:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.0219345 ~ 5.95 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:24:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 45.285713 with temperature 33.5 [HeaterCheck.cs@111] 07/18/2026 22:24:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=133.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:24:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 133.90468072891235. Used = 133.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:24:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 100.28571 with temperature 97.25 [HeaterCheck.cs@67] 07/18/2026 22:24:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 41.25 [HeaterCheck.cs@67] 07/18/2026 22:24:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 40.5 [HeaterCheck.cs@67] 07/18/2026 22:24:12 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284024, estimate=76.03445537779096 for layer 17, Z=1.7010001 [PrintingService.cs@1524] 07/18/2026 22:24:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 17, island count 7 [PrintingService.cs@1569] 07/18/2026 22:24:13 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 18, start=0, count=110, Z=1.8010001 [PrintingService.cs@1518] 07/18/2026 22:24:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:24:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 40.75 [HeaterCheck.cs@67] 07/18/2026 22:24:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=134.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:24:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 134.90468072891235. Used = 134.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:24:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=135.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:24:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 135.90468072891235. Used = 135.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:24:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=134.3200225830078, Elapsed=00:00:27.4925490 [ControlledHeating.cs@486] 07/18/2026 22:24:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 45.285713 with temperature 41 [HeaterCheck.cs@67] 07/18/2026 22:24:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=46.285714285714285,powderChamber1=46.285714285714285,powderChamber2=46.285714285714285,powderChamber3=46.285714285714285,powderChamber4=46.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:24:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 46.285713 with temperature 41.5 [HeaterCheck.cs@67] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 134.68630981445312 after 00:00:30.4962831 [ControlledHeating.cs@493] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2102918. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633662. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2747143. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2882652. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:24:23 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 207436443668 (207436443668 @ 0) for mcu = 1714.098603 [18/07/2026 21:23:29] (1728.6370305666667 sec) to 209849851776 (from now=209729851776, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 207436443668 (207436443668 @ 0) for mcu = 1714.098603 [18/07/2026 21:23:29] (1728.6370305666667 sec) to 209849851776 (from external timestamp, flags=None, requested=209849851776 (209849851776 @ 0) for mcu = 1734.210646 [18/07/2026 21:23:49] (1748.7487648 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 207436443668 (207436443668 @ 0) for mcu = 1714.098603 [18/07/2026 21:23:29] (1728.6370305666667 sec) to 209849851776 (from external timestamp, flags=None, requested=209849851776 (209849851776 @ 0) for mcu = 1734.210646 [18/07/2026 21:23:49] (1748.7487648 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:24:23 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:24:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 46.285713 with temperature 42.25 [HeaterCheck.cs@67] 07/18/2026 22:24:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 46.285713 with temperature 41.75 [HeaterCheck.cs@67] 07/18/2026 22:24:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=136.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:24:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 136.90468072891235. Used = 136.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:24:27 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=36,powderChamber4=35.5 that are outside of set tolerance 10 for current step target 46.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:24:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 46.285713 with temperature 42.25 [HeaterCheck.cs@67] 07/18/2026 22:24:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=137.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:24:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 137.90468072891235. Used = 137.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:24:34 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9776350. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3958412. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:24:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:24:34 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:24:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 46.285713 with temperature 41.53571319580078 [HeaterCheck.cs@67] 07/18/2026 22:24:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=138.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:24:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 138.90468072891235. Used = 138.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:24:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=47.285714285714285,powderChamber1=47.285714285714285,powderChamber2=47.285714285714285,powderChamber3=47.285714285714285,powderChamber4=47.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:24:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.5 [HeaterCheck.cs@67] 07/18/2026 22:24:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.5 [HeaterCheck.cs@67] 07/18/2026 22:24:40 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218850, estimate=67.20872700008387 for layer 18, Z=1.8010001 [PrintingService.cs@1524] 07/18/2026 22:24:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 18, island count 7 [PrintingService.cs@1569] 07/18/2026 22:24:41 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 19, start=0, count=110, Z=1.901 [PrintingService.cs@1518] 07/18/2026 22:24:41 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:24:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.5 [HeaterCheck.cs@67] 07/18/2026 22:24:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] no longer approaching new target of 100.28571 with temperature 82.71428680419922 [HeaterCheck.cs@111] 07/18/2026 22:24:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.5 [HeaterCheck.cs@67] 07/18/2026 22:24:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=139.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:24:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 139.90468072891235. Used = 139.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:24:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 100.28571 with temperature 96 [HeaterCheck.cs@67] 07/18/2026 22:24:44 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=36.5 that are outside of set tolerance 10 for current step target 47.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:24:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.75 [HeaterCheck.cs@67] 07/18/2026 22:24:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 47.285713 with temperature 42.46428680419922 [HeaterCheck.cs@67] 07/18/2026 22:24:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 100.28571 with temperature 95.75 [HeaterCheck.cs@67] 07/18/2026 22:24:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.5 [HeaterCheck.cs@67] 07/18/2026 22:24:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.75 [HeaterCheck.cs@67] 07/18/2026 22:24:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.5 [HeaterCheck.cs@67] 07/18/2026 22:24:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=140.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:24:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 140.90468072891235. Used = 140.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:24:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=139.49130249023438, Elapsed=00:00:27.2114532 [ControlledHeating.cs@486] 07/18/2026 22:24:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.75 [HeaterCheck.cs@67] 07/18/2026 22:24:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.75 [HeaterCheck.cs@67] 07/18/2026 22:24:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43.25 [HeaterCheck.cs@67] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 140.21998596191406 after 00:00:30.2141921 [ControlledHeating.cs@493] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (1 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2902631. SinceCollect=00:01:00.7105200. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3373, gen1=336, gen2=45, LatencyMode=Interactive, FreeMemory=5932482560, Live=448083912, HeapSizeBytes=455891280, FragmentedBytes=8334768, TotalCommittedBytes=467222528, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632904. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0675427. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0819381. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:24:53 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 211061373004 (211061373004 @ 0) for mcu = 1744.306681 [18/07/2026 21:23:59] (1758.8447750333332 sec) to 213510354916 (from now=213390354916, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 211061373004 (211061373004 @ 0) for mcu = 1744.306681 [18/07/2026 21:23:59] (1758.8447750333332 sec) to 213510354916 (from external timestamp, flags=None, requested=213510354916 (213510354916 @ 0) for mcu = 1764.715130 [18/07/2026 21:24:19] (1779.2529576333334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 211061373004 (211061373004 @ 0) for mcu = 1744.306681 [18/07/2026 21:23:59] (1758.8447750333332 sec) to 213510354916 (from external timestamp, flags=None, requested=213510354916 (213510354916 @ 0) for mcu = 1764.715130 [18/07/2026 21:24:19] (1779.2529576333334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:24:53 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:24:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43 [HeaterCheck.cs@67] 07/18/2026 22:24:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=141.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:24:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 141.90468072891235. Used = 141.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:24:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 44.25 [HeaterCheck.cs@67] 07/18/2026 22:24:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43.25 [HeaterCheck.cs@67] 07/18/2026 22:25:00 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.5 [HeaterCheck.cs@67] 07/18/2026 22:25:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=142.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:25:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 142.90468072891235. Used = 142.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:25:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43 [HeaterCheck.cs@67] 07/18/2026 22:25:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 47.285713 with temperature 35.75 [HeaterCheck.cs@111] 07/18/2026 22:25:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 42.5 [HeaterCheck.cs@67] 07/18/2026 22:25:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9963056. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1906856. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:25:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:25:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:25:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43 [HeaterCheck.cs@67] 07/18/2026 22:25:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0791927 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:25:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 623.3101436, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 2.8613595832213043, Elapsed = 00:10:23.3284514, TimeTotal = 06:03:04.3452831, Remaining = 05:52:41.0168317, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:23:32.6232663, WeightTotalEstimate = 01:23:32.6232663, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:52:49.3269753, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:23.3284514, HeatingEstimate = 00:59:36.6898564, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:57:24.4763973, WeightEstimate = 01:23:32.6232663 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:17:47. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:25:06 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8613595832213043;StartedAtUtc;00:10:23.3284514;06:03:04.3452831;05:52:41.0168317;False;110;0;0;00:00:00;01:23:32.6232663;01:23:32.6232663;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:52:49.3269753;00:00:00;02:00:00;00:10:23.3284514;00:59:36.6898564;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:57:24.4763973 [PrintingService.cs@1918] 07/18/2026 22:25:06 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=101.28571428571428,printChamber1=101.28571428571428,printChamber2=101.28571428571428,printChamber3=101.28571428571428,printChamber4=101.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:25:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=143.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:25:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 143.90468072891235. Used = 143.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:25:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.28571 with temperature 96.75 [HeaterCheck.cs@67] 07/18/2026 22:25:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.28571 with temperature 96.75 [HeaterCheck.cs@67] 07/18/2026 22:25:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.28571 with temperature 96.5 [HeaterCheck.cs@67] 07/18/2026 22:25:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.28571 with temperature 97 [HeaterCheck.cs@67] 07/18/2026 22:25:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 101.28571 with temperature 96.5 [HeaterCheck.cs@67] 07/18/2026 22:25:12 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=90.96428680419922 that are outside of set tolerance 10 for current step target 101.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:25:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=144.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:25:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 144.90468072891235. Used = 144.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:25:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 630.3235327, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 2.8935539458992245, Elapsed = 00:10:30.3417808, TimeTotal = 06:03:04.3452234, Remaining = 05:52:34.0034426, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:23:32.6232663, WeightTotalEstimate = 01:23:32.6232663, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:52:49.3269753, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:30.3417808, HeatingEstimate = 00:59:29.6764673, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:57:24.4763973, WeightEstimate = 01:23:32.6232663 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:17:47. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:25:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.8935539458992245;StartedAtUtc;00:10:30.3417808;06:03:04.3452234;05:52:34.0034426;False;110;0;0;00:00:00;01:23:32.6232663;01:23:32.6232663;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:52:49.3269753;00:00:00;02:00:00;00:10:30.3417808;00:59:29.6764673;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:57:24.4763973 [PrintingService.cs@1918] 07/18/2026 22:25:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=102.28571428571428,printChamber1=102.28571428571428,printChamber2=102.28571428571428,printChamber3=102.28571428571428,printChamber4=102.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:25:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284036, estimate=76.28539784837834 for layer 19, Z=1.901 [PrintingService.cs@1524] 07/18/2026 22:25:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 19, island count 7 [PrintingService.cs@1569] 07/18/2026 22:25:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 20, start=0, count=110, Z=2.001 [PrintingService.cs@1518] 07/18/2026 22:25:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:25:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=145.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:25:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 145.90468072891235. Used = 145.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:25:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 636.3219882, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 2.9098507452926183, Elapsed = 00:10:36.3402446, TimeTotal = 06:04:28.4839980, Remaining = 05:53:52.1437534, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:24:56.7620326, WeightTotalEstimate = 01:24:56.7620326, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:54:13.4657416, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:36.3402446, HeatingEstimate = 00:59:23.6780118, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:58:48.6151636, WeightEstimate = 01:24:56.7620326 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:25:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9098507452926183;StartedAtUtc;00:10:36.3402446;06:04:28.4839980;05:53:52.1437534;False;110;0;0;00:00:00;01:24:56.7620326;01:24:56.7620326;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:54:13.4657416;00:00:00;02:00:00;00:10:36.3402446;00:59:23.6780118;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:58:48.6151636 [PrintingService.cs@1918] 07/18/2026 22:25:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=103.28571428571428,printChamber1=103.28571428571428,printChamber2=103.28571428571428,printChamber3=103.28571428571428,printChamber4=103.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:25:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43.25 [HeaterCheck.cs@67] 07/18/2026 22:25:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=144.84849548339844, Elapsed=00:00:27.4891900 [ControlledHeating.cs@486] 07/18/2026 22:25:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43.5 [HeaterCheck.cs@67] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 145.53286743164062 after 00:00:30.4915035 [ControlledHeating.cs@493] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2083674. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0629981. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2729919. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2851201. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:25:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 214721876144 (214721876144 @ 0) for mcu = 1774.811301 [18/07/2026 21:24:29] (1789.3489678666667 sec) to 217134687118 (from now=217014687118, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 214721876144 (214721876144 @ 0) for mcu = 1774.811301 [18/07/2026 21:24:29] (1789.3489678666667 sec) to 217134687118 (from external timestamp, flags=None, requested=217134687118 (217134687118 @ 0) for mcu = 1794.918331 [18/07/2026 21:24:49] (1809.4557259833334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 214721876144 (214721876144 @ 0) for mcu = 1774.811301 [18/07/2026 21:24:29] (1789.3489678666667 sec) to 217134687118 (from external timestamp, flags=None, requested=217134687118 (217134687118 @ 0) for mcu = 1794.918331 [18/07/2026 21:24:49] (1809.4557259833334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 47.285713 with temperature 36.5 [HeaterCheck.cs@111] 07/18/2026 22:25:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 47.285713 with temperature 43 [HeaterCheck.cs@67] 07/18/2026 22:25:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=146.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:25:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 146.90468072891235. Used = 146.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:25:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 642.3268305, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 2.9373096122754787, Elapsed = 00:10:42.3450824, TimeTotal = 06:04:28.4839935, Remaining = 05:53:46.1389111, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:24:56.7620326, WeightTotalEstimate = 01:24:56.7620326, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:54:13.4657416, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:42.3450824, HeatingEstimate = 00:59:17.6731695, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:58:48.6151636, WeightEstimate = 01:24:56.7620326 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:25:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9373096122754787;StartedAtUtc;00:10:42.3450824;06:04:28.4839935;05:53:46.1389111;False;110;0;0;00:00:00;01:24:56.7620326;01:24:56.7620326;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:54:13.4657416;00:00:00;02:00:00;00:10:42.3450824;00:59:17.6731695;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:58:48.6151636 [PrintingService.cs@1918] 07/18/2026 22:25:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=104.28571428571428,printChamber1=104.28571428571428,printChamber2=104.28571428571428,printChamber3=104.28571428571428,printChamber4=104.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:25:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43.5 [HeaterCheck.cs@67] 07/18/2026 22:25:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43.5 [HeaterCheck.cs@67] 07/18/2026 22:25:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 104.28571 with temperature 99.75 [HeaterCheck.cs@67] 07/18/2026 22:25:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43.25 [HeaterCheck.cs@67] 07/18/2026 22:25:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 104.28571 with temperature 99.75 [HeaterCheck.cs@67] 07/18/2026 22:25:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=147.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:25:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 147.90468072891235. Used = 147.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:25:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 648.3261151, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 2.9647430859257495, Elapsed = 00:10:48.3443672, TimeTotal = 06:04:28.4839937, Remaining = 05:53:40.1396265, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:24:56.7620326, WeightTotalEstimate = 01:24:56.7620326, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:54:13.4657416, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:10:48.3443672, HeatingEstimate = 00:59:11.6738849, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 01:58:48.6151636, WeightEstimate = 01:24:56.7620326 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:19:12. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:25:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 2.9647430859257495;StartedAtUtc;00:10:48.3443672;06:04:28.4839937;05:53:40.1396265;False;110;0;0;00:00:00;01:24:56.7620326;01:24:56.7620326;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:54:13.4657416;00:00:00;02:00:00;00:10:48.3443672;00:59:11.6738849;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;01:58:48.6151636 [PrintingService.cs@1918] 07/18/2026 22:25:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=105.28571428571428,printChamber1=105.28571428571428,printChamber2=105.28571428571428,printChamber3=105.28571428571428,printChamber4=105.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:25:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9863470. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3952570. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:25:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:25:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:25:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=148.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:25:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 148.90468072891235. Used = 148.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:25:37 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=95.25 that are outside of set tolerance 10 for current step target 105.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:25:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 105.28571 with temperature 100.28571319580078 [HeaterCheck.cs@67] 07/18/2026 22:25:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43.5 [HeaterCheck.cs@67] 07/18/2026 22:25:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43.75 [HeaterCheck.cs@67] 07/18/2026 22:25:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=149.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:25:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 149.90468072891235. Used = 149.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:25:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 47.285713 with temperature 42.5 [HeaterCheck.cs@67] 07/18/2026 22:25:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/18/2026 22:25:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/18/2026 22:25:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/18/2026 22:25:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 22:25:46 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/18/2026 22:25:46 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 22:25:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218854, estimate=67.12856967867901 for layer 20, Z=2.001 [PrintingService.cs@1524] 07/18/2026 22:25:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 20, island count 7 [PrintingService.cs@1569] 07/18/2026 22:25:48 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 21, start=0, count=110, Z=2.101 [PrintingService.cs@1518] 07/18/2026 22:25:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:25:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=150.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:25:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 150.90468072891235. Used = 150.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:25:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=150.78494262695312, Elapsed=00:00:27.2211398 [ControlledHeating.cs@486] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 150.88775634765625 after 00:00:30.2214800 [ControlledHeating.cs@493] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2897473. SinceCollect=00:01:00.7166775. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3516, gen1=349, gen2=46, LatencyMode=Interactive, FreeMemory=5920473088, Live=448117624, HeapSizeBytes=456873000, FragmentedBytes=9035888, TotalCommittedBytes=466173952, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (98 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633477. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0699704. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0887440. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:25:54 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 218346208346 (218346208346 @ 0) for mcu = 1805.014459 [18/07/2026 21:24:59] (1819.5517362166668 sec) to 220797079801 (from now=220677079801, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 218346208346 (218346208346 @ 0) for mcu = 1805.014459 [18/07/2026 21:24:59] (1819.5517362166668 sec) to 220797079801 (from external timestamp, flags=None, requested=220797079801 (220797079801 @ 0) for mcu = 1825.438650 [18/07/2026 21:25:20] (1839.9756650083334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 218346208346 (218346208346 @ 0) for mcu = 1805.014459 [18/07/2026 21:24:59] (1819.5517362166668 sec) to 220797079801 (from external timestamp, flags=None, requested=220797079801 (220797079801 @ 0) for mcu = 1825.438650 [18/07/2026 21:25:20] (1839.9756650083334 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:25:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:25:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=151.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:25:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 151.90468072891235. Used = 151.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:25:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber2 [HysteresisHeater] within range of 47.285713 with temperature 43.5 [HeaterCheck.cs@67] 07/18/2026 22:26:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=152.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:26:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 152.90468072891235. Used = 152.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:26:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 47.285713 with temperature 37.5 [HeaterCheck.cs@111] 07/18/2026 22:26:05 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9899553. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1971210. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:26:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:26:05 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:26:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0761212 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:26:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=153.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:26:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 153.90468072891235. Used = 153.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:26:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 105.28571 with temperature 101 [HeaterCheck.cs@67] 07/18/2026 22:26:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 105.28571 with temperature 100.75 [HeaterCheck.cs@67] 07/18/2026 22:26:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 105.28571 with temperature 100.5 [HeaterCheck.cs@67] 07/18/2026 22:26:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 105.28571 with temperature 100.75 [HeaterCheck.cs@67] 07/18/2026 22:26:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] no longer approaching new target of 105.28571 with temperature 91.5 [HeaterCheck.cs@111] 07/18/2026 22:26:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=154.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:26:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 154.90468072891235. Used = 154.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:26:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 47.285713 with temperature 42.75 [HeaterCheck.cs@67] 07/18/2026 22:26:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 47.285713 with temperature 43 [HeaterCheck.cs@67] 07/18/2026 22:26:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284015, estimate=76.26959604331034 for layer 21, Z=2.101 [PrintingService.cs@1524] 07/18/2026 22:26:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 21, island count 7 [PrintingService.cs@1569] 07/18/2026 22:26:17 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 22, start=0, count=110, Z=2.201 [PrintingService.cs@1518] 07/18/2026 22:26:17 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:26:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 105.28571 with temperature 101.5 [HeaterCheck.cs@67] 07/18/2026 22:26:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=155.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:26:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 155.90468072891235. Used = 155.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:26:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=155.6381378173828, Elapsed=00:00:27.4996306 [ControlledHeating.cs@486] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 155.680908203125 after 00:00:30.5063781 [ControlledHeating.cs@493] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2181511. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0618156. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2864060. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.3020940. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:26:24 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 222008601029 (222008601029 @ 0) for mcu = 1835.534619 [18/07/2026 21:25:30] (1850.0716752416668 sec) to 224422668834 (from now=224302668834, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 222008601029 (222008601029 @ 0) for mcu = 1835.534619 [18/07/2026 21:25:30] (1850.0716752416668 sec) to 224422668834 (from external timestamp, flags=None, requested=224422668834 (224422668834 @ 0) for mcu = 1855.652053 [18/07/2026 21:25:50] (1870.18890695 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 222008601029 (222008601029 @ 0) for mcu = 1835.534619 [18/07/2026 21:25:30] (1850.0716752416668 sec) to 224422668834 (from external timestamp, flags=None, requested=224422668834 (224422668834 @ 0) for mcu = 1855.652053 [18/07/2026 21:25:50] (1870.18890695 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:26:24 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:26:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=156.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:26:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 156.90468072891235. Used = 156.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:26:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=157.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:26:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 157.90468072891235. Used = 157.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:26:35 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9849200. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.4105746. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:26:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:26:35 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:26:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=158.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:26:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 158.90468072891235. Used = 158.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:26:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=159.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:26:43 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 159.90468072891235. Used = 159.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:26:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218840, estimate=67.259529111871 for layer 22, Z=2.201 [PrintingService.cs@1524] 07/18/2026 22:26:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 22, island count 7 [PrintingService.cs@1569] 07/18/2026 22:26:48 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 23, start=0, count=110, Z=2.3009999 [PrintingService.cs@1518] 07/18/2026 22:26:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:26:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=160.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:26:49 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 160.90468072891235. Used = 160.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:26:51 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=160.65264892578125, Elapsed=00:00:27.2175026 [ControlledHeating.cs@486] 07/18/2026 22:26:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (571 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:26:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 160.75479125976562 after 00:00:30.2172943 [ControlledHeating.cs@493] 07/18/2026 22:26:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:26:54 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2940208. SinceCollect=00:01:00.7256495. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3658, gen1=356, gen2=47, LatencyMode=Interactive, FreeMemory=5937872896, Live=448509880, HeapSizeBytes=456970064, FragmentedBytes=9009944, TotalCommittedBytes=466173952, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634271. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0664528. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0781138. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:26:55 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 225634190062 (225634190062 @ 0) for mcu = 1865.748066 [18/07/2026 21:26:00] (1880.2849171833334 sec) to 228082842522 (from now=227962842522, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 225634190062 (225634190062 @ 0) for mcu = 1865.748066 [18/07/2026 21:26:00] (1880.2849171833334 sec) to 228082842522 (from external timestamp, flags=None, requested=228082842522 (228082842522 @ 0) for mcu = 1886.153673 [18/07/2026 21:26:21] (1900.69035435 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 225634190062 (225634190062 @ 0) for mcu = 1865.748066 [18/07/2026 21:26:00] (1880.2849171833334 sec) to 228082842522 (from external timestamp, flags=None, requested=228082842522 (228082842522 @ 0) for mcu = 1886.153673 [18/07/2026 21:26:21] (1900.69035435 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=161.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:26:55 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 161.90468072891235. Used = 161.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:27:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=162.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:27:01 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 162.90468072891235. Used = 162.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:27:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 105.28571 with temperature 100.5 [HeaterCheck.cs@67] 07/18/2026 22:27:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 47.285713 with temperature 35.75 [HeaterCheck.cs@111] 07/18/2026 22:27:06 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9691824. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1856724. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:27:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:27:06 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:27:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.1578992 ~ 6 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:27:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=163.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:27:07 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 163.90468072891235. Used = 163.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:27:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 105.28571 with temperature 100.75 [HeaterCheck.cs@67] 07/18/2026 22:27:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=164.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:27:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 164.90468072891235. Used = 164.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:27:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] no longer approaching new target of 105.28571 with temperature 90.60713958740234 [HeaterCheck.cs@111] 07/18/2026 22:27:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 105.28571 with temperature 100.75 [HeaterCheck.cs@67] 07/18/2026 22:27:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284069, estimate=76.14068424536214 for layer 23, Z=2.3009999 [PrintingService.cs@1524] 07/18/2026 22:27:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 23, island count 7 [PrintingService.cs@1569] 07/18/2026 22:27:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 24, start=0, count=110, Z=2.401 [PrintingService.cs@1518] 07/18/2026 22:27:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:27:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] no longer approaching new target of 105.28571 with temperature 93.75 [HeaterCheck.cs@111] 07/18/2026 22:27:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=165.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:27:19 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 165.90468072891235. Used = 165.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:27:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 47.285713 with temperature 43 [HeaterCheck.cs@67] 07/18/2026 22:27:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 47.285713 with temperature 36.75 [HeaterCheck.cs@111] 07/18/2026 22:27:22 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=164.2120361328125, Elapsed=00:00:27.4992230 [ControlledHeating.cs@486] 07/18/2026 22:27:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 47.285713 with temperature 43 [HeaterCheck.cs@67] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 164.2413787841797 after 00:00:30.5007770 [ControlledHeating.cs@493] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2092894. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627423. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2730458. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2860707. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:27:25 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 229294363750 (229294363750 @ 0) for mcu = 1896.249732 [18/07/2026 21:26:31] (1910.7863645833334 sec) to 231707761101 (from now=231587761101, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 229294363750 (229294363750 @ 0) for mcu = 1896.249732 [18/07/2026 21:26:31] (1910.7863645833334 sec) to 231707761101 (from external timestamp, flags=None, requested=231707761101 (231707761101 @ 0) for mcu = 1916.361525 [18/07/2026 21:26:51] (1930.898009175 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 229294363750 (229294363750 @ 0) for mcu = 1896.249732 [18/07/2026 21:26:31] (1910.7863645833334 sec) to 231707761101 (from external timestamp, flags=None, requested=231707761101 (231707761101 @ 0) for mcu = 1916.361525 [18/07/2026 21:26:51] (1930.898009175 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=166.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:27:25 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 166.90468072891235. Used = 166.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:27:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=167.90468072891235 [ControlledHeating.cs@169] 07/18/2026 22:27:31 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 167.90468072891235. Used = 167.90468072891235 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:27:36 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3894760. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:27:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:27:36 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:27:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-surface step target on surface=168 [ControlledHeating.cs@169] 07/18/2026 22:27:37 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] New soft heater target. Requested = 168. Used = 168 [SoftAnalysisSurfaceHeater.cs@881] 07/18/2026 22:27:38 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=48.285714285714285,powderChamber1=48.285714285714285,powderChamber2=48.285714285714285,powderChamber3=48.285714285714285,powderChamber4=48.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:27:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] approaching new target of 48.285713 with temperature 43.14285659790039 [HeaterCheck.cs@88] 07/18/2026 22:27:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 48.285713 with temperature 43.60714340209961 [HeaterCheck.cs@67] 07/18/2026 22:27:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 48.285713 with temperature 43.46428680419922 [HeaterCheck.cs@67] 07/18/2026 22:27:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 48.285713 with temperature 43.57143020629883 [HeaterCheck.cs@67] 07/18/2026 22:27:44 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=37.75,powderChamber4=38 that are outside of set tolerance 10 for current step target 48.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:27:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 105.28571 with temperature 100.75 [HeaterCheck.cs@67] 07/18/2026 22:27:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 48.285713 with temperature 43.39285659790039 [HeaterCheck.cs@67] 07/18/2026 22:27:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 105.28571 with temperature 100.5 [HeaterCheck.cs@67] 07/18/2026 22:27:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218857, estimate=67.2034323617992 for layer 24, Z=2.401 [PrintingService.cs@1524] 07/18/2026 22:27:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 24, island count 7 [PrintingService.cs@1569] 07/18/2026 22:27:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 25, start=0, count=110, Z=2.501 [PrintingService.cs@1518] 07/18/2026 22:27:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:27:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 105.28571 with temperature 100.5 [HeaterCheck.cs@67] 07/18/2026 22:27:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 48.285713 with temperature 43.82143020629883 [HeaterCheck.cs@67] 07/18/2026 22:27:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 105.28571 with temperature 100.75 [HeaterCheck.cs@67] 07/18/2026 22:27:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 48.285713 with temperature 43.28571319580078 [HeaterCheck.cs@67] 07/18/2026 22:27:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 105.28571 with temperature 100.5 [HeaterCheck.cs@67] 07/18/2026 22:27:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 105.28571 with temperature 100.5 [HeaterCheck.cs@67] 07/18/2026 22:27:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 48.285713 with temperature 43.53571319580078 [HeaterCheck.cs@67] 07/18/2026 22:27:52 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.3489532470703, Elapsed=00:00:27.1995958 [ControlledHeating.cs@486] 07/18/2026 22:27:54 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (532 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:27:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 166.68255615234375 after 00:00:30.1990236 [ControlledHeating.cs@493] 07/18/2026 22:27:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:27:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:27:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2906830. SinceCollect=00:01:00.6976226. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:27:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3803, gen1=367, gen2=48, LatencyMode=Interactive, FreeMemory=5911445504, Live=449983864, HeapSizeBytes=458542280, FragmentedBytes=9127528, TotalCommittedBytes=467222528, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:27:55 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634248. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0674687. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0814565. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:27:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:27:56 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:27:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 232919282329 (232919282329 @ 0) for mcu = 1926.457534 [18/07/2026 21:27:01] (1940.9940194083333 sec) to 235367332886 (from now=235247332886, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:27:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 232919282329 (232919282329 @ 0) for mcu = 1926.457534 [18/07/2026 21:27:01] (1940.9940194083333 sec) to 235367332886 (from external timestamp, flags=None, requested=235367332886 (235367332886 @ 0) for mcu = 1946.858078 [18/07/2026 21:27:21] (1961.3944407166666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:27:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 232919282329 (232919282329 @ 0) for mcu = 1926.457534 [18/07/2026 21:27:01] (1940.9940194083333 sec) to 235367332886 (from external timestamp, flags=None, requested=235367332886 (235367332886 @ 0) for mcu = 1946.858078 [18/07/2026 21:27:21] (1961.3944407166666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:27:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:28:06 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0432597 ~ 6 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:28:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9988750. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1850715. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:28:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:28:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:28:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 105.28571 with temperature 100.28571319580078 [HeaterCheck.cs@67] 07/18/2026 22:28:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284075, estimate=76.0050213140222 for layer 25, Z=2.501 [PrintingService.cs@1524] 07/18/2026 22:28:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 25, island count 7 [PrintingService.cs@1569] 07/18/2026 22:28:19 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 26, start=0, count=110, Z=2.601 [PrintingService.cs@1518] 07/18/2026 22:28:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:28:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.831298828125, Elapsed=00:00:27.4927105 [ControlledHeating.cs@486] 07/18/2026 22:28:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] no longer approaching new target of 105.28571 with temperature 95.25 [HeaterCheck.cs@111] 07/18/2026 22:28:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 822.4299972, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 3.731213148076983, Elapsed = 00:13:42.4482488, TimeTotal = 06:07:22.3818249, Remaining = 05:53:39.9335761, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:27:50.6598643, WeightTotalEstimate = 01:27:50.6598643, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:57:07.3635733, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:13:42.4482488, HeatingEstimate = 00:56:17.5700028, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:01:42.5129953, WeightEstimate = 01:27:50.6598643 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:22:05. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:28:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.731213148076983;StartedAtUtc;00:13:42.4482488;06:07:22.3818249;05:53:39.9335761;False;110;0;0;00:00:00;01:27:50.6598643;01:27:50.6598643;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:57:07.3635733;00:00:00;02:00:00;00:13:42.4482488;00:56:17.5700028;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:01:42.5129953 [PrintingService.cs@1918] 07/18/2026 22:28:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=106.28571428571428,printChamber1=106.28571428571428,printChamber2=106.28571428571428,printChamber3=106.28571428571428,printChamber4=106.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.134765625 after 00:00:30.4922643 [ControlledHeating.cs@493] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1982174. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0618409. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2653414. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2770791. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:28:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 236578854114 (236578854114 @ 0) for mcu = 1956.954246 [18/07/2026 21:27:31] (1971.49045095 sec) to 238990726454 (from now=238870726454, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 236578854114 (236578854114 @ 0) for mcu = 1956.954246 [18/07/2026 21:27:31] (1971.49045095 sec) to 238990726454 (from external timestamp, flags=None, requested=238990726454 (238990726454 @ 0) for mcu = 1977.053332 [18/07/2026 21:27:52] (1991.5893871166666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 236578854114 (236578854114 @ 0) for mcu = 1956.954246 [18/07/2026 21:27:31] (1971.49045095 sec) to 238990726454 (from external timestamp, flags=None, requested=238990726454 (238990726454 @ 0) for mcu = 1977.053332 [18/07/2026 21:27:52] (1991.5893871166666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:28:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:28:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 48.285713 with temperature 35.75 [HeaterCheck.cs@111] 07/18/2026 22:28:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] no longer approaching new target of 48.285713 with temperature 41 [HeaterCheck.cs@111] 07/18/2026 22:28:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 828.4401447, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 3.75847945314616, Elapsed = 00:13:48.4583917, TimeTotal = 06:07:22.3818203, Remaining = 05:53:33.9234286, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:27:50.6598643, WeightTotalEstimate = 01:27:50.6598643, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:57:07.3635733, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:13:48.4583917, HeatingEstimate = 00:56:11.5598553, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:01:42.5129953, WeightEstimate = 01:27:50.6598643 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:22:05. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:28:31 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.75847945314616;StartedAtUtc;00:13:48.4583917;06:07:22.3818203;05:53:33.9234286;False;110;0;0;00:00:00;01:27:50.6598643;01:27:50.6598643;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:57:07.3635733;00:00:00;02:00:00;00:13:48.4583917;00:56:11.5598553;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:01:42.5129953 [PrintingService.cs@1918] 07/18/2026 22:28:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=107.28571428571428,printChamber1=107.28571428571428,printChamber2=107.28571428571428,printChamber3=107.28571428571428,printChamber4=107.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:28:37 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9813764. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3846218. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:28:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:28:37 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:28:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 834.4459335, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 3.785726043847932, Elapsed = 00:13:54.4641896, TimeTotal = 06:07:22.3818294, Remaining = 05:53:27.9176398, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:27:50.6598643, WeightTotalEstimate = 01:27:50.6598643, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:57:07.3635733, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:13:54.4641896, HeatingEstimate = 00:56:05.5540665, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:01:42.5129953, WeightEstimate = 01:27:50.6598643 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:22:05. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:28:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.785726043847932;StartedAtUtc;00:13:54.4641896;06:07:22.3818294;05:53:27.9176398;False;110;0;0;00:00:00;01:27:50.6598643;01:27:50.6598643;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:57:07.3635733;00:00:00;02:00:00;00:13:54.4641896;00:56:05.5540665;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:01:42.5129953 [PrintingService.cs@1918] 07/18/2026 22:28:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=108.28571428571428,printChamber1=108.28571428571428,printChamber2=108.28571428571428,printChamber3=108.28571428571428,printChamber4=108.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:28:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 108.28571 with temperature 103.5 [HeaterCheck.cs@67] 07/18/2026 22:28:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 108.28571 with temperature 104 [HeaterCheck.cs@67] 07/18/2026 22:28:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 108.28571 with temperature 103.5 [HeaterCheck.cs@67] 07/18/2026 22:28:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 108.28571 with temperature 103.5 [HeaterCheck.cs@67] 07/18/2026 22:28:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 840.4495827, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 3.8129628640617317, Elapsed = 00:14:00.4678333, TimeTotal = 06:07:22.3818239, Remaining = 05:53:21.9139906, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:27:50.6598643, WeightTotalEstimate = 01:27:50.6598643, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:57:07.3635733, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:00.4678333, HeatingEstimate = 00:55:59.5504173, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:01:42.5129953, WeightEstimate = 01:27:50.6598643 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:22:05. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:28:44 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.8129628640617317;StartedAtUtc;00:14:00.4678333;06:07:22.3818239;05:53:21.9139906;False;110;0;0;00:00:00;01:27:50.6598643;01:27:50.6598643;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:57:07.3635733;00:00:00;02:00:00;00:14:00.4678333;00:55:59.5504173;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:01:42.5129953 [PrintingService.cs@1918] 07/18/2026 22:28:44 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=109.28571428571428,printChamber1=109.28571428571428,printChamber2=109.28571428571428,printChamber3=109.28571428571428,printChamber4=109.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:28:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 109.28571 with temperature 104 [HeaterCheck.cs@88] 07/18/2026 22:28:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 48.285713 with temperature 43.5 [HeaterCheck.cs@67] 07/18/2026 22:28:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 48.285713 with temperature 39.25 [HeaterCheck.cs@111] 07/18/2026 22:28:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 109.28571 with temperature 105.75 [HeaterCheck.cs@67] 07/18/2026 22:28:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218852, estimate=67.2314013349897 for layer 26, Z=2.601 [PrintingService.cs@1524] 07/18/2026 22:28:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 26, island count 7 [PrintingService.cs@1569] 07/18/2026 22:28:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 27, start=0, count=110, Z=2.701 [PrintingService.cs@1518] 07/18/2026 22:28:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:28:50 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=99 that are outside of set tolerance 10 for current step target 109.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:28:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.40289306640625, Elapsed=00:00:27.2075817 [ControlledHeating.cs@486] 07/18/2026 22:28:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 850.4591518, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 3.844915966060731, Elapsed = 00:14:10.4774693, TimeTotal = 06:08:39.5333476, Remaining = 05:54:29.0558783, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:29:07.8113211, WeightTotalEstimate = 01:29:07.8113211, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:58:24.5150301, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:14:10.4774693, HeatingEstimate = 00:55:49.5408482, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:02:59.6644521, WeightEstimate = 01:29:07.8113211 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:23:23. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:28:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 3.844915966060731;StartedAtUtc;00:14:10.4774693;06:08:39.5333476;05:54:29.0558783;False;110;0;0;00:00:00;01:29:07.8113211;01:29:07.8113211;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:58:24.5150301;00:00:00;02:00:00;00:14:10.4774693;00:55:49.5408482;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:02:59.6644521 [PrintingService.cs@1918] 07/18/2026 22:28:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=110.28571428571428,printChamber1=110.28571428571428,printChamber2=110.28571428571428,printChamber3=110.28571428571428,printChamber4=110.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:28:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 110.28571 with temperature 106.25 [HeaterCheck.cs@67] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.42330932617188 after 00:00:30.2082538 [ControlledHeating.cs@493] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:00.2824779. SinceCollect=00:01:00.6918390. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 110.28571 with temperature 105.32142639160156 [HeaterCheck.cs@67] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=3954, gen1=378, gen2=49, LatencyMode=Interactive, FreeMemory=5894717440, Live=449211960, HeapSizeBytes=457892352, FragmentedBytes=9230328, TotalCommittedBytes=467042304, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (313 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633480. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0741002. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0866510. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:28:56 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 240202247682 (240202247682 @ 0) for mcu = 1987.149443 [18/07/2026 21:28:02] (2001.68539735 sec) to 242650871064 (from now=242530871064, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 240202247682 (240202247682 @ 0) for mcu = 1987.149443 [18/07/2026 21:28:02] (2001.68539735 sec) to 242650871064 (from external timestamp, flags=None, requested=242650871064 (242650871064 @ 0) for mcu = 2007.554801 [18/07/2026 21:28:22] (2022.0905922 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 240202247682 (240202247682 @ 0) for mcu = 1987.149443 [18/07/2026 21:28:02] (2001.68539735 sec) to 242650871064 (from external timestamp, flags=None, requested=242650871064 (242650871064 @ 0) for mcu = 2007.554801 [18/07/2026 21:28:22] (2022.0905922 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:28:56 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:29:00 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=99.5 that are outside of set tolerance 10 for current step target 110.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:29:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 110.28571 with temperature 105.32142639160156 [HeaterCheck.cs@67] 07/18/2026 22:29:03 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=156.0723419189453 that are outside of set tolerance 10 for current step target 168 and final target 168 [ControlledHeating.cs@205] 07/18/2026 22:29:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 110.28571 with temperature 105.35713958740234 [HeaterCheck.cs@67] 07/18/2026 22:29:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 110.28571 with temperature 105.75 [HeaterCheck.cs@67] 07/18/2026 22:29:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0739333 ~ 5.98 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:29:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 110.28571 with temperature 105.5 [HeaterCheck.cs@67] 07/18/2026 22:29:07 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9888518. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1941352. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:29:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:29:07 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:29:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 110.28571 with temperature 105.5 [HeaterCheck.cs@67] 07/18/2026 22:29:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 48.285713 with temperature 45 [HeaterCheck.cs@67] 07/18/2026 22:29:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284082, estimate=76.08801496984263 for layer 27, Z=2.701 [PrintingService.cs@1524] 07/18/2026 22:29:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 27, island count 7 [PrintingService.cs@1569] 07/18/2026 22:29:18 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 28, start=0, count=110, Z=2.8009999 [PrintingService.cs@1518] 07/18/2026 22:29:18 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:29:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 110.28571 with temperature 105.5 [HeaterCheck.cs@67] 07/18/2026 22:29:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 48.285713 with temperature 45.25 [HeaterCheck.cs@67] 07/18/2026 22:29:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.9049835205078, Elapsed=00:00:27.4992929 [ControlledHeating.cs@486] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.14324951171875 after 00:00:30.5003595 [ControlledHeating.cs@493] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2163025. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0616757. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2835231. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2959274. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:29:26 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 243862392292 (243862392292 @ 0) for mcu = 2017.650931 [18/07/2026 21:28:32] (2032.1866024333333 sec) to 246275981608 (from now=246155981608, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 243862392292 (243862392292 @ 0) for mcu = 2017.650931 [18/07/2026 21:28:32] (2032.1866024333333 sec) to 246275981608 (from external timestamp, flags=None, requested=246275981608 (246275981608 @ 0) for mcu = 2037.764350 [18/07/2026 21:28:52] (2052.299846733333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 243862392292 (243862392292 @ 0) for mcu = 2017.650931 [18/07/2026 21:28:32] (2032.1866024333333 sec) to 246275981608 (from external timestamp, flags=None, requested=246275981608 (246275981608 @ 0) for mcu = 2037.764350 [18/07/2026 21:28:52] (2052.299846733333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:29:26 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:29:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:41.3980482. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:29:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:29:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:29:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 48.285713 with temperature 44.75 [HeaterCheck.cs@67] 07/18/2026 22:29:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 902.4909703, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.075197428976567, Elapsed = 00:15:02.5092408, TimeTotal = 06:09:06.3930651, Remaining = 05:54:03.8838243, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:29:34.6710856, WeightTotalEstimate = 01:29:34.6710856, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:58:51.3747946, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:15:02.5092408, HeatingEstimate = 00:54:57.5090297, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:03:26.5242166, WeightEstimate = 01:29:34.6710856 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:23:49. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:29:46 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.075197428976567;StartedAtUtc;00:15:02.5092408;06:09:06.3930651;05:54:03.8838243;False;110;0;0;00:00:00;01:29:34.6710856;01:29:34.6710856;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:58:51.3747946;00:00:00;02:00:00;00:15:02.5092408;00:54:57.5090297;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:03:26.5242166 [PrintingService.cs@1918] 07/18/2026 22:29:46 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=111.28571428571428,printChamber1=111.28571428571428,printChamber2=111.28571428571428,printChamber3=111.28571428571428,printChamber4=111.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:29:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 48.285713 with temperature 39 [HeaterCheck.cs@111] 07/18/2026 22:29:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218850, estimate=67.22298472173016 for layer 28, Z=2.8009999 [PrintingService.cs@1524] 07/18/2026 22:29:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 111.28571 with temperature 106.28571319580078 [HeaterCheck.cs@67] 07/18/2026 22:29:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 28, island count 7 [PrintingService.cs@1569] 07/18/2026 22:29:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 29, start=0, count=110, Z=2.901 [PrintingService.cs@1518] 07/18/2026 22:29:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:29:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 48.285713 with temperature 45.75 [HeaterCheck.cs@67] 07/18/2026 22:29:52 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=100.5 that are outside of set tolerance 10 for current step target 111.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:29:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 909.5002565, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.10319807339897, Elapsed = 00:15:09.5185069, TimeTotal = 06:09:26.0882714, Remaining = 05:54:16.5697645, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:29:54.3663120, WeightTotalEstimate = 01:29:54.3663120, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:59:11.0700210, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:15:09.5185069, HeatingEstimate = 00:54:50.4997435, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:03:46.2194430, WeightEstimate = 01:29:54.3663120 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:24:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:29:53 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.10319807339897;StartedAtUtc;00:15:09.5185069;06:09:26.0882714;05:54:16.5697645;False;110;0;0;00:00:00;01:29:54.3663120;01:29:54.3663120;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:59:11.0700210;00:00:00;02:00:00;00:15:09.5185069;00:54:50.4997435;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:03:46.2194430 [PrintingService.cs@1918] 07/18/2026 22:29:53 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=112.28571428571428,printChamber1=112.28571428571428,printChamber2=112.28571428571428,printChamber3=112.28571428571428,printChamber4=112.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:29:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 112.28571 with temperature 107.25 [HeaterCheck.cs@88] 07/18/2026 22:29:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 112.28571 with temperature 107.5 [HeaterCheck.cs@67] 07/18/2026 22:29:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.63555908203125, Elapsed=00:00:27.2039291 [ControlledHeating.cs@486] 07/18/2026 22:29:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.10731506347656 after 00:00:30.2028481 [ControlledHeating.cs@493] 07/18/2026 22:29:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:29:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:00.0100000. Loops = 1. [McuMovementClient.cs@475] 07/18/2026 22:29:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 48.285713 with temperature 36.25 [HeaterCheck.cs@111] 07/18/2026 22:29:57 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (245 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:29:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = True, Raw movement duration = 00:00:00.0100000. Loops = 1. GC duration = 00:00:01.2246958. SinceCollect=00:01:01.6510216. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:29:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4104, gen1=404, gen2=51, LatencyMode=Interactive, FreeMemory=5992022016, Live=451315872, HeapSizeBytes=451918480, FragmentedBytes=2045464, TotalCommittedBytes=452657152, PinnedObjectsCount=1, MemoryLoadBytes=2535181516, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:29:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:29:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0582312. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0652677. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:29:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:29:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:00.0787582. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:29:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:29:58 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:29:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 247487502836 (247487502836 @ 0) for mcu = 2047.860480 [18/07/2026 21:29:02] (2062.3958569666665 sec) to 250048070836 (from now=249928070836, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:29:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 247487502836 (247487502836 @ 0) for mcu = 2047.860480 [18/07/2026 21:29:02] (2062.3958569666665 sec) to 250048070836 (from external timestamp, flags=None, requested=250048070836 (250048070836 @ 0) for mcu = 2069.198742 [18/07/2026 21:29:24] (2083.7339236333332 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:29:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 247487502836 (247487502836 @ 0) for mcu = 2047.860480 [18/07/2026 21:29:02] (2062.3958569666665 sec) to 250048070836 (from external timestamp, flags=None, requested=250048070836 (250048070836 @ 0) for mcu = 2069.198742 [18/07/2026 21:29:24] (2083.7339236333332 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:29:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:29:59 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=101.5 that are outside of set tolerance 10 for current step target 112.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:30:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 916.5042181, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.134795772483221, Elapsed = 00:15:16.5224813, TimeTotal = 06:09:26.0882842, Remaining = 05:54:09.5658029, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:29:54.3663120, WeightTotalEstimate = 01:29:54.3663120, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:59:11.0700210, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:15:16.5224813, HeatingEstimate = 00:54:43.4957819, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:03:46.2194430, WeightEstimate = 01:29:54.3663120 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:24:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:30:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.134795772483221;StartedAtUtc;00:15:16.5224813;06:09:26.0882842;05:54:09.5658029;False;110;0;0;00:00:00;01:29:54.3663120;01:29:54.3663120;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:59:11.0700210;00:00:00;02:00:00;00:15:16.5224813;00:54:43.4957819;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:03:46.2194430 [PrintingService.cs@1918] 07/18/2026 22:30:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=113.28571428571428,printChamber1=113.28571428571428,printChamber2=113.28571428571428,printChamber3=113.28571428571428,printChamber4=113.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:30:04 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=157.40640258789062 that are outside of set tolerance 10 for current step target 168 and final target 168 [ControlledHeating.cs@205] 07/18/2026 22:30:06 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=102.75 that are outside of set tolerance 10 for current step target 113.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:30:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 923.507274, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.166389432252788, Elapsed = 00:15:23.5255608, TimeTotal = 06:09:26.0883078, Remaining = 05:54:02.5627470, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:29:54.3663120, WeightTotalEstimate = 01:29:54.3663120, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:59:11.0700210, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:15:23.5255608, HeatingEstimate = 00:54:36.4927260, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:03:46.2194430, WeightEstimate = 01:29:54.3663120 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:24:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:30:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.166389432252788;StartedAtUtc;00:15:23.5255608;06:09:26.0883078;05:54:02.5627470;False;110;0;0;00:00:00;01:29:54.3663120;01:29:54.3663120;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:59:11.0700210;00:00:00;02:00:00;00:15:23.5255608;00:54:36.4927260;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:03:46.2194430 [PrintingService.cs@1918] 07/18/2026 22:30:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=114.28571428571428,printChamber1=114.28571428571428,printChamber2=114.28571428571428,printChamber3=114.28571428571428,printChamber4=114.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:30:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 357 samples in 00:01:00.0944057 ~ 5.94 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:30:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 48.285713 with temperature 43.5 [HeaterCheck.cs@67] 07/18/2026 22:30:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9871628. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:11.1850146. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:30:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:30:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:30:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 929.517477, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.193503668450904, Elapsed = 00:15:29.5357247, TimeTotal = 06:09:26.0882687, Remaining = 05:53:56.5525440, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:29:54.3663120, WeightTotalEstimate = 01:29:54.3663120, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 02:59:11.0700210, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:15:29.5357247, HeatingEstimate = 00:54:30.4825230, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:03:46.2194430, WeightEstimate = 01:29:54.3663120 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:24:09. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:30:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.193503668450904;StartedAtUtc;00:15:29.5357247;06:09:26.0882687;05:53:56.5525440;False;110;0;0;00:00:00;01:29:54.3663120;01:29:54.3663120;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;02:59:11.0700210;00:00:00;02:00:00;00:15:29.5357247;00:54:30.4825230;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:03:46.2194430 [PrintingService.cs@1918] 07/18/2026 22:30:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=115.28571428571428,printChamber1=115.28571428571428,printChamber2=115.28571428571428,printChamber3=115.28571428571428,printChamber4=115.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:30:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 115.28571 with temperature 110.75 [HeaterCheck.cs@67] 07/18/2026 22:30:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 48.285713 with temperature 46 [HeaterCheck.cs@67] 07/18/2026 22:30:17 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=49.285714285714285,powderChamber1=49.285714285714285,powderChamber2=49.285714285714285,powderChamber3=49.285714285714285,powderChamber4=49.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:30:19 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=105.25,printChamber3=105 that are outside of set tolerance 10 for current step target 115.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:30:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 115.28571 with temperature 110.75 [HeaterCheck.cs@67] 07/18/2026 22:30:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284073, estimate=76.17537571780022 for layer 29, Z=2.901 [PrintingService.cs@1524] 07/18/2026 22:30:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 29, island count 7 [PrintingService.cs@1569] 07/18/2026 22:30:20 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 30, start=0, count=110, Z=3.001 [PrintingService.cs@1518] 07/18/2026 22:30:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:30:23 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=38.75 that are outside of set tolerance 10 for current step target 49.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:30:24 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.41522216796875, Elapsed=00:00:27.4383675 [ControlledHeating.cs@486] 07/18/2026 22:30:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 115.28571 with temperature 110.5 [HeaterCheck.cs@67] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 115.28571 with temperature 111.25 [HeaterCheck.cs@67] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.58352661132812 after 00:00:30.4366684 [ControlledHeating.cs@493] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.2034818. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0631566. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.2664443. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:29.2771928. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:30:27 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 251259592064 (251259592064 @ 0) for mcu = 2079.294868 [18/07/2026 21:29:34] (2093.8299338666666 sec) to 253551857943 (from now=253431857943, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 251259592064 (251259592064 @ 0) for mcu = 2079.294868 [18/07/2026 21:29:34] (2093.8299338666666 sec) to 253551857943 (from external timestamp, flags=None, requested=253551857943 (253551857943 @ 0) for mcu = 2098.397267 [18/07/2026 21:29:53] (2112.932149525 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 251259592064 (251259592064 @ 0) for mcu = 2079.294868 [18/07/2026 21:29:34] (2093.8299338666666 sec) to 253551857943 (from external timestamp, flags=None, requested=253551857943 (253551857943 @ 0) for mcu = 2098.397267 [18/07/2026 21:29:53] (2112.932149525 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:30:27 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:30:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 115.28571 with temperature 110.75 [HeaterCheck.cs@67] 07/18/2026 22:30:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 115.28571 with temperature 110.5 [HeaterCheck.cs@67] 07/18/2026 22:30:38 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9916689. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:40.3853247. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:30:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:30:38 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:30:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.5 [HeaterCheck.cs@67] 07/18/2026 22:30:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/18/2026 22:30:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/18/2026 22:30:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 22:30:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/18/2026 22:30:45 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/18/2026 22:30:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 22:30:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218890, estimate=67.29578057480212 for layer 30, Z=3.001 [PrintingService.cs@1524] 07/18/2026 22:30:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 30, island count 7 [PrintingService.cs@1569] 07/18/2026 22:30:47 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 31, start=0, count=110, Z=3.101 [PrintingService.cs@1518] 07/18/2026 22:30:47 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:30:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 115.28571 with temperature 110.28571319580078 [HeaterCheck.cs@67] 07/18/2026 22:30:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 49.285713 with temperature 41.5 [HeaterCheck.cs@111] 07/18/2026 22:30:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 46.25 [HeaterCheck.cs@67] 07/18/2026 22:30:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.283203125, Elapsed=00:00:27.2153972 [ControlledHeating.cs@486] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.4401397705078 after 00:00:30.2245615 [ControlledHeating.cs@493] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:59.4289518. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632908. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:59.4950164. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:59.5063538. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:30:57 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 254763379171 (254763379171 @ 0) for mcu = 2108.493372 [18/07/2026 21:30:03] (2123.0281597583335 sec) to 257179315501 (from now=257059315501, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 254763379171 (254763379171 @ 0) for mcu = 2108.493372 [18/07/2026 21:30:03] (2123.0281597583335 sec) to 257179315501 (from external timestamp, flags=None, requested=257179315501 (257179315501 @ 0) for mcu = 2128.626362 [18/07/2026 21:30:23] (2143.1609625083333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 254763379171 (254763379171 @ 0) for mcu = 2108.493372 [18/07/2026 21:30:03] (2123.0281597583335 sec) to 257179315501 (from external timestamp, flags=None, requested=257179315501 (257179315501 @ 0) for mcu = 2128.626362 [18/07/2026 21:30:23] (2143.1609625083333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:30:57 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:30:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 49.285713 with temperature 35.25 [HeaterCheck.cs@111] 07/18/2026 22:31:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.5 [HeaterCheck.cs@67] 07/18/2026 22:31:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 361 samples in 00:01:00.0418545 ~ 6.01 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:31:08 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9824735. Loops = 44. [McuMovementClient.cs@475] 07/18/2026 22:31:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9824735. Loops = 44. GC duration = 00:00:00.3045746. SinceCollect=00:01:10.9220950. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:31:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4277, gen1=417, gen2=52, LatencyMode=Interactive, FreeMemory=5787746304, Live=437860992, HeapSizeBytes=502615536, FragmentedBytes=65396216, TotalCommittedBytes=513392640, PinnedObjectsCount=25, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:31:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:31:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:31:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (400 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:31:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 986.6872058, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.43740046249478, Elapsed = 00:16:26.7054641, TimeTotal = 06:10:36.1148704, Remaining = 05:54:09.4094063, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:31:04.3929031, WeightTotalEstimate = 01:31:04.3929031, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:00:21.0966121, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:26.7054641, HeatingEstimate = 00:53:33.3127942, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:04:56.2460341, WeightEstimate = 01:31:04.3929031 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:25:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:31:10 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.43740046249478;StartedAtUtc;00:16:26.7054641;06:10:36.1148704;05:54:09.4094063;False;110;0;0;00:00:00;01:31:04.3929031;01:31:04.3929031;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:00:21.0966121;00:00:00;02:00:00;00:16:26.7054641;00:53:33.3127942;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:04:56.2460341 [PrintingService.cs@1918] 07/18/2026 22:31:10 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=116.28571428571428,printChamber1=116.28571428571428,printChamber2=116.28571428571428,printChamber3=116.28571428571428,printChamber4=116.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:31:16 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=106,printChamber4=105.5 that are outside of set tolerance 10 for current step target 116.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 995.6899747, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.477904254049762, Elapsed = 00:16:35.7121072, TimeTotal = 06:10:36.1187446, Remaining = 05:54:00.4066374, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:31:04.3929031, WeightTotalEstimate = 01:31:04.3929031, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:00:21.0966121, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:35.7121072, HeatingEstimate = 00:53:24.3100253, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:04:56.2460341, WeightEstimate = 01:31:04.3929031 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:25:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:31:19 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.477904254049762;StartedAtUtc;00:16:35.7121072;06:10:36.1187446;05:54:00.4066374;False;110;0;0;00:00:00;01:31:04.3929031;01:31:04.3929031;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:00:21.0966121;00:00:00;02:00:00;00:16:35.7121072;00:53:24.3100253;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:04:56.2460341 [PrintingService.cs@1918] 07/18/2026 22:31:19 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=117.28571428571428,printChamber1=117.28571428571428,printChamber2=117.28571428571428,printChamber3=117.28571428571428,printChamber4=117.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:31:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 117.28571 with temperature 112.5 [HeaterCheck.cs@67] 07/18/2026 22:31:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284087, estimate=76.23749118821033 for layer 31, Z=3.101 [PrintingService.cs@1524] 07/18/2026 22:31:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 31, island count 7 [PrintingService.cs@1569] 07/18/2026 22:31:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 32, start=0, count=110, Z=3.201 [PrintingService.cs@1518] 07/18/2026 22:31:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.5 [HeaterCheck.cs@67] 07/18/2026 22:31:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:31:25 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=106.75 that are outside of set tolerance 10 for current step target 117.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:31:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.69822692871094, Elapsed=00:00:27.5120495 [ControlledHeating.cs@486] 07/18/2026 22:31:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1002.6974483, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.509355160782646, Elapsed = 00:16:42.7156947, TimeTotal = 06:10:36.3433118, Remaining = 05:53:53.6276171, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:31:04.6213564, WeightTotalEstimate = 01:31:04.6213564, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:00:21.3250654, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:42.7156947, HeatingEstimate = 00:53:17.3025517, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:04:56.4744874, WeightEstimate = 01:31:04.6213564 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:25:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:31:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.509355160782646;StartedAtUtc;00:16:42.7156947;06:10:36.3433118;05:53:53.6276171;False;110;0;0;00:00:00;01:31:04.6213564;01:31:04.6213564;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:00:21.3250654;00:00:00;02:00:00;00:16:42.7156947;00:53:17.3025517;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:04:56.4744874 [PrintingService.cs@1918] 07/18/2026 22:31:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=118.28571428571428,printChamber1=118.28571428571428,printChamber2=118.28571428571428,printChamber3=118.28571428571428,printChamber4=118.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.352783203125 after 00:00:30.5110605 [ControlledHeating.cs@493] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0147768. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633140. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0834924. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0976384. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:31:28 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 258390836729 (258390836729 @ 0) for mcu = 2138.722580 [18/07/2026 21:30:33] (2153.2569727416667 sec) to 260841108514 (from now=260721108514, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 258390836729 (258390836729 @ 0) for mcu = 2138.722580 [18/07/2026 21:30:33] (2153.2569727416667 sec) to 260841108514 (from external timestamp, flags=None, requested=260841108514 (260841108514 @ 0) for mcu = 2159.141745 [18/07/2026 21:30:54] (2173.6759042833332 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 258390836729 (258390836729 @ 0) for mcu = 2138.722580 [18/07/2026 21:30:33] (2153.2569727416667 sec) to 260841108514 (from external timestamp, flags=None, requested=260841108514 (260841108514 @ 0) for mcu = 2159.141745 [18/07/2026 21:30:54] (2173.6759042833332 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:31:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:31:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 118.28571 with temperature 113.28571319580078 [HeaterCheck.cs@67] 07/18/2026 22:31:32 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=107.5 that are outside of set tolerance 10 for current step target 118.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:31:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 118.28571 with temperature 113.28571319580078 [HeaterCheck.cs@67] 07/18/2026 22:31:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=157.47848510742188 that are outside of set tolerance 10 for current step target 168 and final target 168 [ControlledHeating.cs@205] 07/18/2026 22:31:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1011.7042421, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.549860011724915, Elapsed = 00:16:51.7224926, TimeTotal = 06:10:36.3433159, Remaining = 05:53:44.6208233, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:31:04.6213564, WeightTotalEstimate = 01:31:04.6213564, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:00:21.3250654, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:51.7224926, HeatingEstimate = 00:53:08.2957579, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:04:56.4744874, WeightEstimate = 01:31:04.6213564 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:25:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:31:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.549860011724915;StartedAtUtc;00:16:51.7224926;06:10:36.3433159;05:53:44.6208233;False;110;0;0;00:00:00;01:31:04.6213564;01:31:04.6213564;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:00:21.3250654;00:00:00;02:00:00;00:16:51.7224926;00:53:08.2957579;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:04:56.4744874 [PrintingService.cs@1918] 07/18/2026 22:31:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=119.28571428571428,printChamber1=119.28571428571428,printChamber2=119.28571428571428,printChamber3=119.28571428571428,printChamber4=119.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:31:37 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 119.28571 with temperature 114.75 [HeaterCheck.cs@67] 07/18/2026 22:31:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 119.28571 with temperature 114.5 [HeaterCheck.cs@67] 07/18/2026 22:31:39 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2103102. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:31:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:31:39 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:31:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 119.28571 with temperature 114.75 [HeaterCheck.cs@67] 07/18/2026 22:31:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.5 [HeaterCheck.cs@67] 07/18/2026 22:31:41 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=108.5 that are outside of set tolerance 10 for current step target 119.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:31:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 119.28571 with temperature 114.5 [HeaterCheck.cs@67] 07/18/2026 22:31:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1018.7077737, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.581356231037259, Elapsed = 00:16:58.7261037, TimeTotal = 06:10:36.3433954, Remaining = 05:53:37.6172917, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:31:04.6213564, WeightTotalEstimate = 01:31:04.6213564, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:00:21.3250654, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:16:58.7261037, HeatingEstimate = 00:53:01.2922263, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:04:56.4744874, WeightEstimate = 01:31:04.6213564 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:25:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:31:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.581356231037259;StartedAtUtc;00:16:58.7261037;06:10:36.3433954;05:53:37.6172917;False;110;0;0;00:00:00;01:31:04.6213564;01:31:04.6213564;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:00:21.3250654;00:00:00;02:00:00;00:16:58.7261037;00:53:01.2922263;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:04:56.4744874 [PrintingService.cs@1918] 07/18/2026 22:31:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=120.28571428571428,printChamber1=120.28571428571428,printChamber2=120.28571428571428,printChamber3=120.28571428571428,printChamber4=120.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:31:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 120.28571 with temperature 114.25 [HeaterCheck.cs@88] 07/18/2026 22:31:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.75 [HeaterCheck.cs@67] 07/18/2026 22:31:48 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=110.25 that are outside of set tolerance 10 for current step target 120.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:31:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.75 [HeaterCheck.cs@67] 07/18/2026 22:31:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1025.7088306, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.612840840600456, Elapsed = 00:17:05.7271281, TimeTotal = 06:10:36.3433629, Remaining = 05:53:30.6162348, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:31:04.6213564, WeightTotalEstimate = 01:31:04.6213564, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:00:21.3250654, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:17:05.7271281, HeatingEstimate = 00:52:54.2911694, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:04:56.4744874, WeightEstimate = 01:31:04.6213564 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:25:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:31:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.612840840600456;StartedAtUtc;00:17:05.7271281;06:10:36.3433629;05:53:30.6162348;False;110;0;0;00:00:00;01:31:04.6213564;01:31:04.6213564;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:00:21.3250654;00:00:00;02:00:00;00:17:05.7271281;00:52:54.2911694;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:04:56.4744874 [PrintingService.cs@1918] 07/18/2026 22:31:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=121.28571428571428,printChamber1=121.28571428571428,printChamber2=121.28571428571428,printChamber3=121.28571428571428,printChamber4=121.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:31:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218843, estimate=67.10439541469177 for layer 32, Z=3.201 [PrintingService.cs@1524] 07/18/2026 22:31:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32, island count 7 [PrintingService.cs@1569] 07/18/2026 22:31:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 33, start=0, count=110, Z=3.3009999 [PrintingService.cs@1518] 07/18/2026 22:31:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:31:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.75 [HeaterCheck.cs@67] 07/18/2026 22:31:55 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=110.5 that are outside of set tolerance 10 for current step target 121.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:31:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.6954345703125, Elapsed=00:00:27.2208965 [ControlledHeating.cs@486] 07/18/2026 22:31:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 45.5 [HeaterCheck.cs@67] 07/18/2026 22:31:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1032.7106796, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.640251272715943, Elapsed = 00:17:12.7289283, TimeTotal = 06:10:55.8837357, Remaining = 05:53:43.1548074, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:31:24.1617780, WeightTotalEstimate = 01:31:24.1617780, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:00:40.8654870, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:17:12.7289283, HeatingEstimate = 00:52:47.2893204, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:05:16.0149090, WeightEstimate = 01:31:24.1617780 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:25:39. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:31:56 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.640251272715943;StartedAtUtc;00:17:12.7289283;06:10:55.8837357;05:53:43.1548074;False;110;0;0;00:00:00;01:31:24.1617780;01:31:24.1617780;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:00:40.8654870;00:00:00;02:00:00;00:17:12.7289283;00:52:47.2893204;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:05:16.0149090 [PrintingService.cs@1918] 07/18/2026 22:31:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=122.28571428571428,printChamber1=122.28571428571428,printChamber2=122.28571428571428,printChamber3=122.28571428571428,printChamber4=122.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.73739624023438 after 00:00:30.2202925 [ControlledHeating.cs@493] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2403981. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0624995. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3052706. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3212249. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:31:58 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 262052629742 (262052629742 @ 0) for mcu = 2169.237765 [18/07/2026 21:31:04] (2183.7719145166666 sec) to 264468093663 (from now=264348093663, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 262052629742 (262052629742 @ 0) for mcu = 2169.237765 [18/07/2026 21:31:04] (2183.7719145166666 sec) to 264468093663 (from external timestamp, flags=None, requested=264468093663 (264468093663 @ 0) for mcu = 2189.366826 [18/07/2026 21:31:24] (2203.900780525 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 262052629742 (262052629742 @ 0) for mcu = 2169.237765 [18/07/2026 21:31:04] (2183.7719145166666 sec) to 264468093663 (from external timestamp, flags=None, requested=264468093663 (264468093663 @ 0) for mcu = 2189.366826 [18/07/2026 21:31:24] (2203.900780525 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:31:58 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:32:02 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=112 that are outside of set tolerance 10 for current step target 122.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:32:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 49.285713 with temperature 37 [HeaterCheck.cs@111] 07/18/2026 22:32:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1039.7148826, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.6717225210074185, Elapsed = 00:17:19.7331328, TimeTotal = 06:10:55.8837372, Remaining = 05:53:36.1506044, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:31:24.1617780, WeightTotalEstimate = 01:31:24.1617780, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:00:40.8654870, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:17:19.7331328, HeatingEstimate = 00:52:40.2851174, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:05:16.0149090, WeightEstimate = 01:31:24.1617780 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:25:39. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:32:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.6717225210074185;StartedAtUtc;00:17:19.7331328;06:10:55.8837372;05:53:36.1506044;False;110;0;0;00:00:00;01:31:24.1617780;01:31:24.1617780;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:00:40.8654870;00:00:00;02:00:00;00:17:19.7331328;00:52:40.2851174;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:05:16.0149090 [PrintingService.cs@1918] 07/18/2026 22:32:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=123.28571428571428,printChamber1=123.28571428571428,printChamber2=123.28571428571428,printChamber3=123.28571428571428,printChamber4=123.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:32:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 49.285713 with temperature 41.75 [HeaterCheck.cs@111] 07/18/2026 22:32:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1485492 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:32:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.75 [HeaterCheck.cs@67] 07/18/2026 22:32:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.75 [HeaterCheck.cs@67] 07/18/2026 22:32:09 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=113.25,printChamber2=112.5 that are outside of set tolerance 10 for current step target 123.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:32:09 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (250 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:32:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9702321. Loops = 44. [McuMovementClient.cs@475] 07/18/2026 22:32:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9702321. Loops = 44. GC duration = 00:00:00.2945501. SinceCollect=00:01:00.7310752. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:32:09 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4418, gen1=428, gen2=53, LatencyMode=Interactive, FreeMemory=5772754944, Live=450510000, HeapSizeBytes=502968080, FragmentedBytes=53015232, TotalCommittedBytes=511639552, PinnedObjectsCount=24, MemoryLoadBytes=2788699668, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:32:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:32:09 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:32:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 123.28571 with temperature 118.5 [HeaterCheck.cs@67] 07/18/2026 22:32:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.5 [HeaterCheck.cs@67] 07/18/2026 22:32:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.5 [HeaterCheck.cs@67] 07/18/2026 22:32:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.5 [HeaterCheck.cs@67] 07/18/2026 22:32:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 123.28571 with temperature 118.28571319580078 [HeaterCheck.cs@67] 07/18/2026 22:32:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 123.28571 with temperature 118.32142639160156 [HeaterCheck.cs@67] 07/18/2026 22:32:22 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284082, estimate=76.2177603711306 for layer 33, Z=3.3009999 [PrintingService.cs@1524] 07/18/2026 22:32:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 33, island count 7 [PrintingService.cs@1569] 07/18/2026 22:32:23 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 34, start=0, count=110, Z=3.401 [PrintingService.cs@1518] 07/18/2026 22:32:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:32:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 46.25 [HeaterCheck.cs@67] 07/18/2026 22:32:25 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.50787353515625, Elapsed=00:00:27.5088046 [ControlledHeating.cs@486] 07/18/2026 22:32:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.06838989257812 after 00:00:30.5114866 [ControlledHeating.cs@493] 07/18/2026 22:32:28 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:32:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0220921. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:32:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:32:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0625188. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0906919. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:32:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:32:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1051978. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:32:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:32:29 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:32:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 265679614891 (265679614891 @ 0) for mcu = 2199.462998 [18/07/2026 21:31:34] (2213.996790758333 sec) to 268129461405 (from now=268009461405, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:32:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 265679614891 (265679614891 @ 0) for mcu = 2199.462998 [18/07/2026 21:31:34] (2213.996790758333 sec) to 268129461405 (from external timestamp, flags=None, requested=268129461405 (268129461405 @ 0) for mcu = 2219.878604 [18/07/2026 21:31:54] (2234.412178375 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:32:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 265679614891 (265679614891 @ 0) for mcu = 2199.462998 [18/07/2026 21:31:34] (2213.996790758333 sec) to 268129461405 (from external timestamp, flags=None, requested=268129461405 (268129461405 @ 0) for mcu = 2219.878604 [18/07/2026 21:31:54] (2234.412178375 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:32:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:32:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 46 [HeaterCheck.cs@67] 07/18/2026 22:32:40 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9931470. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2142490. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:32:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:32:40 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:32:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 49.285713 with temperature 44.75 [HeaterCheck.cs@67] 07/18/2026 22:32:41 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=50.285714285714285,powderChamber1=50.285714285714285,powderChamber2=50.285714285714285,powderChamber3=50.285714285714285,powderChamber4=50.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:32:47 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber3=39.5,powderChamber4=39.75 that are outside of set tolerance 10 for current step target 50.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:32:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218835, estimate=67.237532937068 for layer 34, Z=3.401 [PrintingService.cs@1524] 07/18/2026 22:32:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 34, island count 7 [PrintingService.cs@1569] 07/18/2026 22:32:49 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 35, start=0, count=110, Z=3.501 [PrintingService.cs@1518] 07/18/2026 22:32:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 616, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:32:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 123.28571 with temperature 118.5 [HeaterCheck.cs@67] 07/18/2026 22:32:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1090.7142391, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 4.8893041047928145, Elapsed = 00:18:10.7324900, TimeTotal = 06:11:48.5426192, Remaining = 05:53:37.8101292, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:32:16.8206593, WeightTotalEstimate = 01:32:16.8206593, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:01:33.5243683, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:10.7324900, HeatingEstimate = 00:51:49.2857609, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:08.6737903, WeightEstimate = 01:32:16.8206593 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:26:32. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:32:54 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 4.8893041047928145;StartedAtUtc;00:18:10.7324900;06:11:48.5426192;05:53:37.8101292;False;110;0;0;00:00:00;01:32:16.8206593;01:32:16.8206593;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:01:33.5243683;00:00:00;02:00:00;00:18:10.7324900;00:51:49.2857609;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:08.6737903 [PrintingService.cs@1918] 07/18/2026 22:32:54 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=124.28571428571428,printChamber1=124.28571428571428,printChamber2=124.28571428571428,printChamber3=124.28571428571428,printChamber4=124.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:32:56 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.7710723876953, Elapsed=00:00:27.2135828 [ControlledHeating.cs@486] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.46102905273438 after 00:00:30.2165791 [ControlledHeating.cs@493] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2373731. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630052. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3053367. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3189357. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:32:59 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 269340982633 (269340982633 @ 0) for mcu = 2229.974685 [18/07/2026 21:32:04] (2244.5081886083335 sec) to 271755220330 (from now=271635220330, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 269340982633 (269340982633 @ 0) for mcu = 2229.974685 [18/07/2026 21:32:04] (2244.5081886083335 sec) to 271755220330 (from external timestamp, flags=None, requested=271755220330 (271755220330 @ 0) for mcu = 2250.093541 [18/07/2026 21:32:25] (2264.6268360833333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 269340982633 (269340982633 @ 0) for mcu = 2229.974685 [18/07/2026 21:32:04] (2244.5081886083335 sec) to 271755220330 (from external timestamp, flags=None, requested=271755220330 (271755220330 @ 0) for mcu = 2250.093541 [18/07/2026 21:32:25] (2264.6268360833333 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:32:59 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:33:00 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=114.17857360839844,printChamber2=113.75,printChamber3=113.5 that are outside of set tolerance 10 for current step target 124.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:33:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 50.285713 with temperature 42.25 [HeaterCheck.cs@111] 07/18/2026 22:33:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.285713 with temperature 46 [HeaterCheck.cs@67] 07/18/2026 22:33:07 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 50.285713 with temperature 38.75 [HeaterCheck.cs@111] 07/18/2026 22:33:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.0698722 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:33:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9773474. Loops = 44. [McuMovementClient.cs@475] 07/18/2026 22:33:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9773474. Loops = 44. GC duration = 00:00:00.4030032. SinceCollect=00:01:00.8326114. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:33:10 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4564, gen1=444, gen2=54, LatencyMode=Interactive, FreeMemory=5906989056, Live=450621032, HeapSizeBytes=503124320, FragmentedBytes=52978760, TotalCommittedBytes=511639552, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:33:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:33:10 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:33:10 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (301 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:33:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.285713 with temperature 47 [HeaterCheck.cs@67] 07/18/2026 22:33:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 124.28571 with temperature 119.75 [HeaterCheck.cs@67] 07/18/2026 22:33:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 124.28571 with temperature 119.42857360839844 [HeaterCheck.cs@67] 07/18/2026 22:33:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 124.28571 with temperature 119.75 [HeaterCheck.cs@67] 07/18/2026 22:33:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 124.28571 with temperature 119.5 [HeaterCheck.cs@67] 07/18/2026 22:33:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 124.28571 with temperature 120 [HeaterCheck.cs@67] 07/18/2026 22:33:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284091, estimate=76.05582926572369 for layer 35, Z=3.501 [PrintingService.cs@1524] 07/18/2026 22:33:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 35, island count 7 [PrintingService.cs@1569] 07/18/2026 22:33:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 36, start=0, count=110, Z=3.601 [PrintingService.cs@1518] 07/18/2026 22:33:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2320, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:33:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.3563232421875, Elapsed=00:00:27.6202418 [ControlledHeating.cs@486] 07/18/2026 22:33:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1124.7395757, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.041887092982275, Elapsed = 00:18:44.7578246, TimeTotal = 06:11:48.2707696, Remaining = 05:53:03.5129450, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:32:16.5488117, WeightTotalEstimate = 01:32:16.5488117, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:01:33.2525207, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:44.7578246, HeatingEstimate = 00:51:15.2604243, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:08.4019427, WeightEstimate = 01:32:16.5488117 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:26:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:33:28 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.041887092982275;StartedAtUtc;00:18:44.7578246;06:11:48.2707696;05:53:03.5129450;False;110;0;0;00:00:00;01:32:16.5488117;01:32:16.5488117;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:01:33.2525207;00:00:00;02:00:00;00:18:44.7578246;00:51:15.2604243;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:08.4019427 [PrintingService.cs@1918] 07/18/2026 22:33:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=125.28571428571428,printChamber1=125.28571428571428,printChamber2=125.28571428571428,printChamber3=125.28571428571428,printChamber4=125.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:33:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 125.28571 with temperature 120.25 [HeaterCheck.cs@88] 07/18/2026 22:33:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 125.28571 with temperature 120.5 [HeaterCheck.cs@67] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 125.28571 with temperature 120.5 [HeaterCheck.cs@67] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.39373779296875 after 00:00:30.6215971 [ControlledHeating.cs@493] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0210554. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630926. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0872639. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0979685. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:33:29 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 272966741558 (272966741558 @ 0) for mcu = 2260.189655 [18/07/2026 21:32:35] (2274.7228463166666 sec) to 275428633573 (from now=275308633573, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 272966741558 (272966741558 @ 0) for mcu = 2260.189655 [18/07/2026 21:32:35] (2274.7228463166666 sec) to 275428633573 (from external timestamp, flags=None, requested=275428633573 (275428633573 @ 0) for mcu = 2280.705632 [18/07/2026 21:32:55] (2295.2386131083335 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 272966741558 (272966741558 @ 0) for mcu = 2260.189655 [18/07/2026 21:32:35] (2274.7228463166666 sec) to 275428633573 (from external timestamp, flags=None, requested=275428633573 (275428633573 @ 0) for mcu = 2280.705632 [18/07/2026 21:32:55] (2295.2386131083335 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:33:29 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:33:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 50.285713 with temperature 45.5 [HeaterCheck.cs@67] 07/18/2026 22:33:34 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=114.75 that are outside of set tolerance 10 for current step target 125.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:33:34 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=51.285714285714285,powderChamber1=51.285714285714285,powderChamber2=51.285714285714285,powderChamber3=51.285714285714285,powderChamber4=51.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:33:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1131.7403903, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.073269262486317, Elapsed = 00:18:51.7586442, TimeTotal = 06:11:48.2707746, Remaining = 05:52:56.5121304, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:32:16.5488117, WeightTotalEstimate = 01:32:16.5488117, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:01:33.2525207, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:51.7586442, HeatingEstimate = 00:51:08.2596097, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:08.4019427, WeightEstimate = 01:32:16.5488117 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:26:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:33:35 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.073269262486317;StartedAtUtc;00:18:51.7586442;06:11:48.2707746;05:52:56.5121304;False;110;0;0;00:00:00;01:32:16.5488117;01:32:16.5488117;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:01:33.2525207;00:00:00;02:00:00;00:18:51.7586442;00:51:08.2596097;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:08.4019427 [PrintingService.cs@1918] 07/18/2026 22:33:35 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=126.28571428571428,printChamber1=126.28571428571428,printChamber2=126.28571428571428,printChamber3=126.28571428571428,printChamber4=126.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:33:40 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=52.285714285714285,powderChamber1=52.285714285714285,powderChamber2=52.285714285714285,powderChamber3=52.285714285714285,powderChamber4=52.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:33:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.1980544. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:33:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:33:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:33:41 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=116.25 that are outside of set tolerance 10 for current step target 126.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:33:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1138.7482013, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.1046827530734005, Elapsed = 00:18:58.7664505, TimeTotal = 06:11:48.2707699, Remaining = 05:52:49.5043194, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:32:16.5488117, WeightTotalEstimate = 01:32:16.5488117, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:01:33.2525207, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:18:58.7664505, HeatingEstimate = 00:51:01.2517987, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:08.4019427, WeightEstimate = 01:32:16.5488117 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:26:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:33:42 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.1046827530734005;StartedAtUtc;00:18:58.7664505;06:11:48.2707699;05:52:49.5043194;False;110;0;0;00:00:00;01:32:16.5488117;01:32:16.5488117;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:01:33.2525207;00:00:00;02:00:00;00:18:58.7664505;00:51:01.2517987;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:08.4019427 [PrintingService.cs@1918] 07/18/2026 22:33:42 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=127.28571428571428,printChamber1=127.28571428571428,printChamber2=127.28571428571428,printChamber3=127.28571428571428,printChamber4=127.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:33:46 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=38.5 that are outside of set tolerance 10 for current step target 52.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:33:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1144.7497654, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.131598291016413, Elapsed = 00:19:04.7709945, TimeTotal = 06:11:48.2737498, Remaining = 05:52:43.5027553, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:32:16.5488117, WeightTotalEstimate = 01:32:16.5488117, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:01:33.2525207, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:19:04.7709945, HeatingEstimate = 00:50:55.2502346, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:08.4019427, WeightEstimate = 01:32:16.5488117 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:26:31. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:33:48 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.131598291016413;StartedAtUtc;00:19:04.7709945;06:11:48.2737498;05:52:43.5027553;False;110;0;0;00:00:00;01:32:16.5488117;01:32:16.5488117;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:01:33.2525207;00:00:00;02:00:00;00:19:04.7709945;00:50:55.2502346;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:08.4019427 [PrintingService.cs@1918] 07/18/2026 22:33:48 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=128.28571428571428,printChamber1=128.28571428571428,printChamber2=128.28571428571428,printChamber3=128.28571428571428,printChamber4=128.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:33:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] approaching new target of 128.28572 with temperature 122.75 [HeaterCheck.cs@88] 07/18/2026 22:33:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218686, estimate=71.45101067896142 for layer 36, Z=3.601 [PrintingService.cs@1524] 07/18/2026 22:33:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 36, island count 32 [PrintingService.cs@1569] 07/18/2026 22:33:51 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 37, start=0, count=110, Z=3.701 [PrintingService.cs@1518] 07/18/2026 22:33:51 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3030, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:33:53 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 128.28572 with temperature 123.75 [HeaterCheck.cs@67] 07/18/2026 22:33:54 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=118 that are outside of set tolerance 10 for current step target 128.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:33:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.25466918945312, Elapsed=00:00:27.2027415 [ControlledHeating.cs@486] 07/18/2026 22:33:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 128.28572 with temperature 123.5 [HeaterCheck.cs@67] 07/18/2026 22:33:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 128.28572 with temperature 123.5 [HeaterCheck.cs@67] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.2354736328125 after 00:00:30.2070376 [ControlledHeating.cs@493] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2382905. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0627543. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3011115. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3169252. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:34:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 276640154801 (276640154801 @ 0) for mcu = 2290.801804 [18/07/2026 21:33:05] (2305.334623341667 sec) to 279054873503 (from now=278934873503, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 276640154801 (276640154801 @ 0) for mcu = 2290.801804 [18/07/2026 21:33:05] (2305.334623341667 sec) to 279054873503 (from external timestamp, flags=None, requested=279054873503 (279054873503 @ 0) for mcu = 2310.924687 [18/07/2026 21:33:25] (2325.4572791916667 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 276640154801 (276640154801 @ 0) for mcu = 2290.801804 [18/07/2026 21:33:05] (2305.334623341667 sec) to 279054873503 (from external timestamp, flags=None, requested=279054873503 (279054873503 @ 0) for mcu = 2310.924687 [18/07/2026 21:33:25] (2325.4572791916667 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:34:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:34:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1443230 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:34:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9924187. Loops = 44. [McuMovementClient.cs@475] 07/18/2026 22:34:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9924187. Loops = 44. GC duration = 00:00:00.3055521. SinceCollect=00:01:00.7319351. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:34:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4711, gen1=468, gen2=55, LatencyMode=Interactive, FreeMemory=5892341760, Live=451826440, HeapSizeBytes=503275080, FragmentedBytes=51934296, TotalCommittedBytes=511688704, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:34:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:34:11 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:34:11 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (551 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:34:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.78571319580078 [HeaterCheck.cs@67] 07/18/2026 22:34:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.64285659790039 [HeaterCheck.cs@67] 07/18/2026 22:34:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.82143020629883 [HeaterCheck.cs@67] 07/18/2026 22:34:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.85714340209961 [HeaterCheck.cs@67] 07/18/2026 22:34:20 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.85714340209961 [HeaterCheck.cs@67] 07/18/2026 22:34:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.42856979370117 [HeaterCheck.cs@67] 07/18/2026 22:34:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.32143020629883 [HeaterCheck.cs@67] 07/18/2026 22:34:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 48.03571319580078 [HeaterCheck.cs@67] 07/18/2026 22:34:23 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=281246, estimate=84.11012644049603 for layer 37, Z=3.701 [PrintingService.cs@1524] 07/18/2026 22:34:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 37, island count 32 [PrintingService.cs@1569] 07/18/2026 22:34:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 38, start=0, count=110, Z=3.8009999 [PrintingService.cs@1518] 07/18/2026 22:34:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.5 [HeaterCheck.cs@67] 07/18/2026 22:34:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 3121, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:34:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.35714340209961 [HeaterCheck.cs@67] 07/18/2026 22:34:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 52.285713 with temperature 39 [HeaterCheck.cs@111] 07/18/2026 22:34:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.39285659790039 [HeaterCheck.cs@67] 07/18/2026 22:34:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.35714340209961 [HeaterCheck.cs@67] 07/18/2026 22:34:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.53571319580078 [HeaterCheck.cs@67] 07/18/2026 22:34:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.4152069091797, Elapsed=00:00:27.5250680 [ControlledHeating.cs@486] 07/18/2026 22:34:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.82143020629883 [HeaterCheck.cs@67] 07/18/2026 22:34:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderBed [HysteresisHeater] within range of 52.285713 with temperature 47.42856979370117 [HeaterCheck.cs@67] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1186.9983813, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.313518414621775, Elapsed = 00:19:47.0166351, TimeTotal = 06:12:19.5600142, Remaining = 05:52:32.5433791, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:32:47.8380514, WeightTotalEstimate = 01:32:47.8380514, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:02:04.5417604, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:19:47.0166351, HeatingEstimate = 00:50:13.0016187, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:39.6911824, WeightEstimate = 01:32:47.8380514 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:27:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.313518414621775;StartedAtUtc;00:19:47.0166351;06:12:19.5600142;05:52:32.5433791;False;110;0;0;00:00:00;01:32:47.8380514;01:32:47.8380514;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:02:04.5417604;00:00:00;02:00:00;00:19:47.0166351;00:50:13.0016187;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:39.6911824 [PrintingService.cs@1918] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=129.28571428571428,printChamber1=129.28571428571428,printChamber2=129.28571428571428,printChamber3=129.28571428571428,printChamber4=129.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.08897399902344 after 00:00:30.5233834 [ControlledHeating.cs@493] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0211331. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0611613. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0881759. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1024493. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:34:30 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 280266394731 (280266394731 @ 0) for mcu = 2321.020812 [18/07/2026 21:33:35] (2335.553289425 sec) to 282716958246 (from now=282596958246, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 280266394731 (280266394731 @ 0) for mcu = 2321.020812 [18/07/2026 21:33:35] (2335.553289425 sec) to 282716958246 (from external timestamp, flags=None, requested=282716958246 (282716958246 @ 0) for mcu = 2341.442406 [18/07/2026 21:33:56] (2355.97465205 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 280266394731 (280266394731 @ 0) for mcu = 2321.020812 [18/07/2026 21:33:35] (2335.553289425 sec) to 282716958246 (from external timestamp, flags=None, requested=282716958246 (282716958246 @ 0) for mcu = 2341.442406 [18/07/2026 21:33:56] (2355.97465205 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:34:30 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:34:36 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=118.75 that are outside of set tolerance 10 for current step target 129.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:34:37 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=157.7300567626953 that are outside of set tolerance 10 for current step target 168 and final target 168 [ControlledHeating.cs@205] 07/18/2026 22:34:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1194.0054847, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.3448847457696695, Elapsed = 00:19:54.0237353, TimeTotal = 06:12:19.5600110, Remaining = 05:52:25.5362757, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:32:47.8380514, WeightTotalEstimate = 01:32:47.8380514, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:02:04.5417604, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:19:54.0237353, HeatingEstimate = 00:50:05.9945153, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:39.6911824, WeightEstimate = 01:32:47.8380514 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:27:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:34:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.3448847457696695;StartedAtUtc;00:19:54.0237353;06:12:19.5600110;05:52:25.5362757;False;110;0;0;00:00:00;01:32:47.8380514;01:32:47.8380514;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:02:04.5417604;00:00:00;02:00:00;00:19:54.0237353;00:50:05.9945153;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:39.6911824 [PrintingService.cs@1918] 07/18/2026 22:34:37 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=130.28571428571428,printChamber1=130.28571428571428,printChamber2=130.28571428571428,printChamber3=130.28571428571428,printChamber4=130.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:34:41 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9963616. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2118002. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:34:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:34:41 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:34:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] no longer approaching new target of 52.285713 with temperature 46.5 [HeaterCheck.cs@111] 07/18/2026 22:34:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1200.006537, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.3717476477023025, Elapsed = 00:20:00.0247895, TimeTotal = 06:12:19.5600129, Remaining = 05:52:19.5352234, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:32:47.8380514, WeightTotalEstimate = 01:32:47.8380514, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:02:04.5417604, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:20:00.0247895, HeatingEstimate = 00:49:59.9934630, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:39.6911824, WeightEstimate = 01:32:47.8380514 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:27:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:34:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.3717476477023025;StartedAtUtc;00:20:00.0247895;06:12:19.5600129;05:52:19.5352234;False;110;0;0;00:00:00;01:32:47.8380514;01:32:47.8380514;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:02:04.5417604;00:00:00;02:00:00;00:20:00.0247895;00:49:59.9934630;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:39.6911824 [PrintingService.cs@1918] 07/18/2026 22:34:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=131.28571428571428,printChamber1=131.28571428571428,printChamber2=131.28571428571428,printChamber3=131.28571428571428,printChamber4=131.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:34:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] no longer approaching new target of 52.285713 with temperature 44.25 [HeaterCheck.cs@111] 07/18/2026 22:34:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 131.28572 with temperature 126.53571319580078 [HeaterCheck.cs@67] 07/18/2026 22:34:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1206.0079219, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.398612059642512, Elapsed = 00:20:06.0261813, TimeTotal = 06:12:19.5600198, Remaining = 05:52:13.5338385, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:32:47.8380514, WeightTotalEstimate = 01:32:47.8380514, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:02:04.5417604, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:20:06.0261813, HeatingEstimate = 00:49:53.9920781, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:39.6911824, WeightEstimate = 01:32:47.8380514 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:27:03. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:34:49 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.398612059642512;StartedAtUtc;00:20:06.0261813;06:12:19.5600198;05:52:13.5338385;False;110;0;0;00:00:00;01:32:47.8380514;01:32:47.8380514;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:02:04.5417604;00:00:00;02:00:00;00:20:06.0261813;00:49:53.9920781;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:39.6911824 [PrintingService.cs@1918] 07/18/2026 22:34:49 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=132.28571428571428,printChamber1=132.28571428571428,printChamber2=132.28571428571428,printChamber3=132.28571428571428,printChamber4=132.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:34:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 132.28572 with temperature 126.42857360839844 [HeaterCheck.cs@88] 07/18/2026 22:34:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 132.28572 with temperature 127.35713958740234 [HeaterCheck.cs@67] 07/18/2026 22:34:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 132.28572 with temperature 129.25 [HeaterCheck.cs@67] 07/18/2026 22:34:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218666, estimate=71.50415695199895 for layer 38, Z=3.8009999 [PrintingService.cs@1524] 07/18/2026 22:34:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 132.28572 with temperature 127.5 [HeaterCheck.cs@67] 07/18/2026 22:34:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 38, island count 32 [PrintingService.cs@1569] 07/18/2026 22:34:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 39, start=0, count=110, Z=3.901 [PrintingService.cs@1518] 07/18/2026 22:34:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 2927, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:34:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 132.28572 with temperature 127.5 [HeaterCheck.cs@67] 07/18/2026 22:34:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1212.0072004, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.421559170558086, Elapsed = 00:20:12.0254932, TimeTotal = 06:12:35.6629204, Remaining = 05:52:23.6374272, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:33:03.9409186, WeightTotalEstimate = 01:33:03.9409186, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:02:20.6446276, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:20:12.0254932, HeatingEstimate = 00:49:47.9927996, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:55.7940496, WeightEstimate = 01:33:03.9409186 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:27:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:34:55 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.421559170558086;StartedAtUtc;00:20:12.0254932;06:12:35.6629204;05:52:23.6374272;False;110;0;0;00:00:00;01:33:03.9409186;01:33:03.9409186;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:02:20.6446276;00:00:00;02:00:00;00:20:12.0254932;00:49:47.9927996;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:55.7940496 [PrintingService.cs@1918] 07/18/2026 22:34:55 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=133.28571428571428,printChamber1=133.28571428571428,printChamber2=133.28571428571428,printChamber3=133.28571428571428,printChamber4=133.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:34:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 133.28572 with temperature 127.5 [HeaterCheck.cs@88] 07/18/2026 22:34:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 133.28572 with temperature 129 [HeaterCheck.cs@67] 07/18/2026 22:34:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 133.28572 with temperature 128.5 [HeaterCheck.cs@67] 07/18/2026 22:34:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=166.841796875, Elapsed=00:00:27.2013131 [ControlledHeating.cs@486] 07/18/2026 22:34:58 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 133.28572 with temperature 128.5 [HeaterCheck.cs@67] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.2647247314453 after 00:00:30.2034085 [ControlledHeating.cs@493] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2249030. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0630216. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2952131. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3053853. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:35:00 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 283928479474 (283928479474 @ 0) for mcu = 2351.538501 [18/07/2026 21:34:06] (2366.070662283333 sec) to 286341238921 (from now=286221238921, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 283928479474 (283928479474 @ 0) for mcu = 2351.538501 [18/07/2026 21:34:06] (2366.070662283333 sec) to 286341238921 (from external timestamp, flags=None, requested=286341238921 (286341238921 @ 0) for mcu = 2371.645044 [18/07/2026 21:34:26] (2386.1769910083335 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 283928479474 (283928479474 @ 0) for mcu = 2351.538501 [18/07/2026 21:34:06] (2366.070662283333 sec) to 286341238921 (from external timestamp, flags=None, requested=286341238921 (286341238921 @ 0) for mcu = 2371.645044 [18/07/2026 21:34:26] (2386.1769910083335 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:35:00 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:35:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1218.0068627, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.448396383513842, Elapsed = 00:20:18.0251286, TimeTotal = 06:12:35.6628935, Remaining = 05:52:17.6377649, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:33:03.9409186, WeightTotalEstimate = 01:33:03.9409186, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:02:20.6446276, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:20:18.0251286, HeatingEstimate = 00:49:41.9931373, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:55.7940496, WeightEstimate = 01:33:03.9409186 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:27:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:35:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.448396383513842;StartedAtUtc;00:20:18.0251286;06:12:35.6628935;05:52:17.6377649;False;110;0;0;00:00:00;01:33:03.9409186;01:33:03.9409186;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:02:20.6446276;00:00:00;02:00:00;00:20:18.0251286;00:49:41.9931373;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:55.7940496 [PrintingService.cs@1918] 07/18/2026 22:35:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=134.28571428571428,printChamber1=134.28571428571428,printChamber2=134.28571428571428,printChamber3=134.28571428571428,printChamber4=134.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:35:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1224.0073714, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.475237728468276, Elapsed = 00:20:24.0256922, TimeTotal = 06:12:35.6629484, Remaining = 05:52:11.6372562, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:33:03.9409186, WeightTotalEstimate = 01:33:03.9409186, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:02:20.6446276, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:20:24.0256922, HeatingEstimate = 00:49:35.9926286, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:06:55.7940496, WeightEstimate = 01:33:03.9409186 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:27:19. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:35:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.475237728468276;StartedAtUtc;00:20:24.0256922;06:12:35.6629484;05:52:11.6372562;False;110;0;0;00:00:00;01:33:03.9409186;01:33:03.9409186;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:02:20.6446276;00:00:00;02:00:00;00:20:24.0256922;00:49:35.9926286;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:06:55.7940496 [PrintingService.cs@1918] 07/18/2026 22:35:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=135.28571428571428,printChamber1=135.28571428571428,printChamber2=135.28571428571428,printChamber3=135.28571428571428,printChamber4=135.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:35:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1066034 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:35:11 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:11. Loops = 44. [McuMovementClient.cs@475] 07/18/2026 22:35:12 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (194 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:35:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:11. Loops = 44. GC duration = 00:00:00.2988509. SinceCollect=00:01:00.7109148. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:35:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=4862, gen1=493, gen2=56, LatencyMode=Interactive, FreeMemory=5898272768, Live=452008280, HeapSizeBytes=503179088, FragmentedBytes=51934880, TotalCommittedBytes=511688704, PinnedObjectsCount=27, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:35:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:35:12 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:35:13 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=124.75 that are outside of set tolerance 10 for current step target 135.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:35:23 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=53.285714285714285,powderChamber1=53.285714285714285,powderChamber2=53.285714285714285,powderChamber3=53.285714285714285,powderChamber4=53.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:35:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=281192, estimate=85.80893205712306 for layer 39, Z=3.901 [PrintingService.cs@1524] 07/18/2026 22:35:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 39, island count 32 [PrintingService.cs@1569] 07/18/2026 22:35:24 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 40, start=0, count=110, Z=4.001 [PrintingService.cs@1518] 07/18/2026 22:35:24 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 1990, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 135.28572 with temperature 130.5 [HeaterCheck.cs@67] 07/18/2026 22:35:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 53.285713 with temperature 48.75 [HeaterCheck.cs@67] 07/18/2026 22:35:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 53.285713 with temperature 39 [HeaterCheck.cs@111] 07/18/2026 22:35:28 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.46885681152344, Elapsed=00:00:27.5147275 [ControlledHeating.cs@486] 07/18/2026 22:35:29 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=42.5 that are outside of set tolerance 10 for current step target 53.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.1553497314453 after 00:00:30.5133733 [ControlledHeating.cs@493] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0313136. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0634089. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0976468. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1139858. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:35:31 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 287552760149 (287552760149 @ 0) for mcu = 2381.741235 [18/07/2026 21:34:36] (2396.273001241667 sec) to 290003585321 (from now=289883585321, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 287552760149 (287552760149 @ 0) for mcu = 2381.741235 [18/07/2026 21:34:36] (2396.273001241667 sec) to 290003585321 (from external timestamp, flags=None, requested=290003585321 (290003585321 @ 0) for mcu = 2402.165026 [18/07/2026 21:34:57] (2416.6965443416666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 287552760149 (287552760149 @ 0) for mcu = 2381.741235 [18/07/2026 21:34:36] (2396.273001241667 sec) to 290003585321 (from external timestamp, flags=None, requested=290003585321 (290003585321 @ 0) for mcu = 2402.165026 [18/07/2026 21:34:57] (2416.6965443416666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:35:31 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:35:42 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9883991. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2225709. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:35:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:35:42 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:35:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 135.28572 with temperature 130.32142639160156 [HeaterCheck.cs@67] 07/18/2026 22:35:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Saving options to /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@86] 07/18/2026 22:35:45 DBUG [SLS4All.Compact.Configuration.AppDataOptionsWriter] [0] Confirmed saved options in /home/ppak/SLS4All/.PrivateConfiguration/SLS4All.Compact.Printer.PrinterWearCaptureSavedOptions.json [AppDataOptionsWriter.cs@138] 07/18/2026 22:35:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Restarting generator [LazyDataGenerator.cs@79] 07/18/2026 22:35:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting generator [LazyDataGenerator.cs@100] 07/18/2026 22:35:45 DBUG [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Generator stopped (cancelled=True) [LazyDataGenerator.cs@145] 07/18/2026 22:35:45 INFO [SLS4All.Compact.Camera.MjpegDeviceCameraClient] [0] Starting camera [MjpegDeviceCameraClient.cs@174] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218666, estimate=71.31332907728266 for layer 40, Z=4.001 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 40, island count 32 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 41, start=0, count=110, Z=4.101 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 41, Z=4.101 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 42, start=0, count=110, Z=4.201 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 42, Z=4.201 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 43, start=0, count=110, Z=4.301 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 43, Z=4.301 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 44, start=0, count=110, Z=4.401 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 44, Z=4.401 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 45, start=0, count=110, Z=4.501 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 45, Z=4.501 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 46, start=0, count=110, Z=4.601 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 46, Z=4.601 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 47, start=0, count=110, Z=4.701 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 47, Z=4.701 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 48, start=0, count=110, Z=4.801 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 48, Z=4.801 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 49, start=0, count=110, Z=4.901 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 49, Z=4.901 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 50, start=0, count=110, Z=5.001 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 50, Z=5.001 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 51, start=0, count=110, Z=5.101 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 51, Z=5.101 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 52, start=0, count=110, Z=5.201 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 52, Z=5.201 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 53, start=0, count=110, Z=5.301 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 53, Z=5.301 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 54, start=0, count=110, Z=5.401 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 54, Z=5.401 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 55, start=0, count=110, Z=5.501 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 55, Z=5.501 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 56, start=0, count=110, Z=5.601 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 56, Z=5.601 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 57, start=0, count=110, Z=5.701 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 57, Z=5.701 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 58, start=0, count=110, Z=5.801 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 58, Z=5.801 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 59, start=0, count=110, Z=5.901 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 59, Z=5.901 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 60, start=0, count=110, Z=6.001 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 60, Z=6.001 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 61, start=0, count=110, Z=6.101 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 61, Z=6.101 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 62, start=0, count=110, Z=6.201 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 62, Z=6.201 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 63, start=0, count=110, Z=6.301 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 63, Z=6.301 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 64, start=0, count=110, Z=6.401 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 64, Z=6.401 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 65, start=0, count=110, Z=6.501 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 65, Z=6.501 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 66, start=0, count=110, Z=6.601 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 66, Z=6.601 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 67, start=0, count=110, Z=6.701 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 67, Z=6.701 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 68, start=0, count=110, Z=6.801 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 68, Z=6.801 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 69, start=0, count=110, Z=6.901 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 0, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=0, estimate=0 for layer 69, Z=6.901 [PrintingService.cs@1524] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 32767, island count 0 [PrintingService.cs@1569] 07/18/2026 22:35:52 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 70, start=0, count=110, Z=7.001 [PrintingService.cs@1518] 07/18/2026 22:35:52 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 315, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:35:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] no longer approaching new target of 53.285713 with temperature 47 [HeaterCheck.cs@111] 07/18/2026 22:35:58 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.45655822753906, Elapsed=00:00:27.2215080 [ControlledHeating.cs@486] 07/18/2026 22:35:59 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 135.28572 with temperature 130.75 [HeaterCheck.cs@67] 07/18/2026 22:36:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1277.0272657, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.704378570083469, Elapsed = 00:21:17.0455174, TimeTotal = 06:13:07.1102121, Remaining = 05:51:50.0646947, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:33:35.3882514, WeightTotalEstimate = 01:33:35.3882514, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:02:52.0919604, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:17.0455174, HeatingEstimate = 00:48:42.9727343, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:07:27.2413824, WeightEstimate = 01:33:35.3882514 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:27:50. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:36:00 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.704378570083469;StartedAtUtc;00:21:17.0455174;06:13:07.1102121;05:51:50.0646947;False;110;0;0;00:00:00;01:33:35.3882514;01:33:35.3882514;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:02:52.0919604;00:00:00;02:00:00;00:21:17.0455174;00:48:42.9727343;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:07:27.2413824 [PrintingService.cs@1918] 07/18/2026 22:36:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=136.28571428571428,printChamber1=136.28571428571428,printChamber2=136.28571428571428,printChamber3=136.28571428571428,printChamber4=136.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.75 [HeaterCheck.cs@67] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.26133728027344 after 00:00:30.2266733 [ControlledHeating.cs@493] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2569421. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633740. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3244906. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3357969. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:36:01 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 291215106549 (291215106549 @ 0) for mcu = 2412.261140 [18/07/2026 21:35:07] (2426.792554575 sec) to 293630465528 (from now=293510465528, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 291215106549 (291215106549 @ 0) for mcu = 2412.261140 [18/07/2026 21:35:07] (2426.792554575 sec) to 293630465528 (from external timestamp, flags=None, requested=293630465528 (293630465528 @ 0) for mcu = 2432.389366 [18/07/2026 21:35:27] (2446.9205460666667 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 291215106549 (291215106549 @ 0) for mcu = 2412.261140 [18/07/2026 21:35:07] (2426.792554575 sec) to 293630465528 (from external timestamp, flags=None, requested=293630465528 (293630465528 @ 0) for mcu = 2432.389366 [18/07/2026 21:35:27] (2446.9205460666667 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:36:01 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:36:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 136.28572 with temperature 131.5 [HeaterCheck.cs@67] 07/18/2026 22:36:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 136.28572 with temperature 131.5 [HeaterCheck.cs@67] 07/18/2026 22:36:06 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=125.5 that are outside of set tolerance 10 for current step target 136.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:36:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1284.0273005, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.73564672839432, Elapsed = 00:21:24.0455546, TimeTotal = 06:13:07.1102145, Remaining = 05:51:43.0646599, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:33:35.3882514, WeightTotalEstimate = 01:33:35.3882514, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:02:52.0919604, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:24.0455546, HeatingEstimate = 00:48:35.9726995, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:07:27.2413824, WeightEstimate = 01:33:35.3882514 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:27:50. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:36:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.73564672839432;StartedAtUtc;00:21:24.0455546;06:13:07.1102145;05:51:43.0646599;False;110;0;0;00:00:00;01:33:35.3882514;01:33:35.3882514;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:02:52.0919604;00:00:00;02:00:00;00:21:24.0455546;00:48:35.9726995;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:07:27.2413824 [PrintingService.cs@1918] 07/18/2026 22:36:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=137.28571428571428,printChamber1=137.28571428571428,printChamber2=137.28571428571428,printChamber3=137.28571428571428,printChamber4=137.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:36:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1198397 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:36:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 49 [HeaterCheck.cs@67] 07/18/2026 22:36:12 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9934055. Loops = 44. [McuMovementClient.cs@475] 07/18/2026 22:36:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (401 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:36:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9934055. Loops = 44. GC duration = 00:00:00.3021375. SinceCollect=00:01:00.7480594. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:36:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=5024, gen1=515, gen2=57, LatencyMode=Interactive, FreeMemory=5874860032, Live=452246976, HeapSizeBytes=503536072, FragmentedBytes=51837080, TotalCommittedBytes=514064384, PinnedObjectsCount=27, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:36:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:36:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:36:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1290.0305137, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.762462459145584, Elapsed = 00:21:30.0488251, TimeTotal = 06:13:07.1102718, Remaining = 05:51:37.0614467, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:33:35.3882514, WeightTotalEstimate = 01:33:35.3882514, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:02:52.0919604, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:30.0488251, HeatingEstimate = 00:48:29.9694863, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:07:27.2413824, WeightEstimate = 01:33:35.3882514 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:27:50. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:36:13 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.762462459145584;StartedAtUtc;00:21:30.0488251;06:13:07.1102718;05:51:37.0614467;False;110;0;0;00:00:00;01:33:35.3882514;01:33:35.3882514;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:02:52.0919604;00:00:00;02:00:00;00:21:30.0488251;00:48:29.9694863;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:07:27.2413824 [PrintingService.cs@1918] 07/18/2026 22:36:13 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=138.28571428571428,printChamber1=138.28571428571428,printChamber2=138.28571428571428,printChamber3=138.28571428571428,printChamber4=138.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:36:19 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=126.96428680419922 that are outside of set tolerance 10 for current step target 138.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:36:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1297.0376637, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.793762147037091, Elapsed = 00:21:37.0559174, TimeTotal = 06:13:07.1102141, Remaining = 05:51:30.0542967, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:33:35.3882514, WeightTotalEstimate = 01:33:35.3882514, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:02:52.0919604, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:21:37.0559174, HeatingEstimate = 00:48:22.9623363, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:07:27.2413824, WeightEstimate = 01:33:35.3882514 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:27:50. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:36:20 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.793762147037091;StartedAtUtc;00:21:37.0559174;06:13:07.1102141;05:51:30.0542967;False;110;0;0;00:00:00;01:33:35.3882514;01:33:35.3882514;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:02:52.0919604;00:00:00;02:00:00;00:21:37.0559174;00:48:22.9623363;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:07:27.2413824 [PrintingService.cs@1918] 07/18/2026 22:36:20 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=139.28571428571428,printChamber1=139.28571428571428,printChamber2=139.28571428571428,printChamber3=139.28571428571428,printChamber4=139.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:36:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 49.25 [HeaterCheck.cs@67] 07/18/2026 22:36:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 49 [HeaterCheck.cs@67] 07/18/2026 22:36:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218838, estimate=67.13674401199268 for layer 70, Z=7.001 [PrintingService.cs@1524] 07/18/2026 22:36:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 41, island count 7 [PrintingService.cs@1569] 07/18/2026 22:36:25 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 71, start=0, count=110, Z=7.101 [PrintingService.cs@1518] 07/18/2026 22:36:25 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 634, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:36:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 139.28572 with temperature 134.4642791748047 [HeaterCheck.cs@67] 07/18/2026 22:36:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 139.28572 with temperature 134.5 [HeaterCheck.cs@67] 07/18/2026 22:36:26 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=129 that are outside of set tolerance 10 for current step target 139.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:36:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 139.28572 with temperature 135 [HeaterCheck.cs@67] 07/18/2026 22:36:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.3827667236328, Elapsed=00:00:27.5115374 [ControlledHeating.cs@486] 07/18/2026 22:36:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 139.28572 with temperature 135.75 [HeaterCheck.cs@67] 07/18/2026 22:36:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 139.28572 with temperature 134.75 [HeaterCheck.cs@67] 07/18/2026 22:36:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 139.28572 with temperature 134.75 [HeaterCheck.cs@67] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.23226928710938 after 00:00:30.5119137 [ControlledHeating.cs@493] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0187012. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0628779. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0836888. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0945891. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:36:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 294841986756 (294841986756 @ 0) for mcu = 2442.485509 [18/07/2026 21:35:37] (2457.0165563 sec) to 297290911008 (from now=297170911008, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 294841986756 (294841986756 @ 0) for mcu = 2442.485509 [18/07/2026 21:35:37] (2457.0165563 sec) to 297290911008 (from external timestamp, flags=None, requested=297290911008 (297290911008 @ 0) for mcu = 2462.893452 [18/07/2026 21:35:57] (2477.4242584 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 294841986756 (294841986756 @ 0) for mcu = 2442.485509 [18/07/2026 21:35:37] (2457.0165563 sec) to 297290911008 (from external timestamp, flags=None, requested=297290911008 (297290911008 @ 0) for mcu = 2462.893452 [18/07/2026 21:35:57] (2477.4242584 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:36:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:36:34 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 139.28572 with temperature 135 [HeaterCheck.cs@67] 07/18/2026 22:36:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:11. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2021287. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:36:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:36:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:36:45 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 53.285713 with temperature 50 [HeaterCheck.cs@67] 07/18/2026 22:36:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:36:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 49.25 [HeaterCheck.cs@67] 07/18/2026 22:36:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:36:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.11668395996094, Elapsed=00:00:27.1957328 [ControlledHeating.cs@486] 07/18/2026 22:36:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284110, estimate=76.34192261015818 for layer 71, Z=7.101 [PrintingService.cs@1524] 07/18/2026 22:36:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 42, island count 7 [PrintingService.cs@1569] 07/18/2026 22:36:59 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 72, start=0, count=110, Z=7.201 [PrintingService.cs@1518] 07/18/2026 22:36:59 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 690, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:37:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1338.0505132, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.956258408941939, Elapsed = 00:22:18.0687631, TimeTotal = 06:14:24.9212850, Remaining = 05:52:06.8525219, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:34:53.1993261, WeightTotalEstimate = 01:34:53.1993261, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:09.9030351, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:18.0687631, HeatingEstimate = 00:47:41.9494868, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:08:45.0524571, WeightEstimate = 01:34:53.1993261 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:37:01 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.956258408941939;StartedAtUtc;00:22:18.0687631;06:14:24.9212850;05:52:06.8525219;False;110;0;0;00:00:00;01:34:53.1993261;01:34:53.1993261;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:09.9030351;00:00:00;02:00:00;00:22:18.0687631;00:47:41.9494868;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:08:45.0524571 [PrintingService.cs@1918] 07/18/2026 22:37:01 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=140.28571428571428,printChamber1=140.28571428571428,printChamber2=140.28571428571428,printChamber3=140.28571428571428,printChamber4=140.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.0635986328125 after 00:00:30.1960640 [ControlledHeating.cs@493] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2154362. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633379. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2804639. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2904839. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:37:02 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 298502432236 (298502432236 @ 0) for mcu = 2472.989610 [18/07/2026 21:36:07] (2487.520268633333 sec) to 300914393451 (from now=300794393451, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 298502432236 (298502432236 @ 0) for mcu = 2472.989610 [18/07/2026 21:36:07] (2487.520268633333 sec) to 300914393451 (from external timestamp, flags=None, requested=300914393451 (300914393451 @ 0) for mcu = 2493.089539 [18/07/2026 21:36:28] (2507.619945425 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 298502432236 (298502432236 @ 0) for mcu = 2472.989610 [18/07/2026 21:36:07] (2487.520268633333 sec) to 300914393451 (from external timestamp, flags=None, requested=300914393451 (300914393451 @ 0) for mcu = 2493.089539 [18/07/2026 21:36:28] (2507.619945425 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:37:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:37:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 50 [HeaterCheck.cs@67] 07/18/2026 22:37:04 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 53.285713 with temperature 40.25 [HeaterCheck.cs@111] 07/18/2026 22:37:06 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:07 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=129.5 that are outside of set tolerance 10 for current step target 140.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:37:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 359 samples in 00:01:00.0146216 ~ 5.98 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:37:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 140.28572 with temperature 135.5 [HeaterCheck.cs@67] 07/18/2026 22:37:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1345.0519404, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 5.9874244631715134, Elapsed = 00:22:25.0701928, TimeTotal = 06:14:24.9212875, Remaining = 05:51:59.8510947, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:34:53.1993261, WeightTotalEstimate = 01:34:53.1993261, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:09.9030351, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:25.0701928, HeatingEstimate = 00:47:34.9480596, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:08:45.0524571, WeightEstimate = 01:34:53.1993261 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:37:08 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 5.9874244631715134;StartedAtUtc;00:22:25.0701928;06:14:24.9212875;05:51:59.8510947;False;110;0;0;00:00:00;01:34:53.1993261;01:34:53.1993261;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:09.9030351;00:00:00;02:00:00;00:22:25.0701928;00:47:34.9480596;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:08:45.0524571 [PrintingService.cs@1918] 07/18/2026 22:37:08 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=141.28571428571428,printChamber1=141.28571428571428,printChamber2=141.28571428571428,printChamber3=141.28571428571428,printChamber4=141.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:37:08 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] approaching new target of 141.28572 with temperature 135.5 [HeaterCheck.cs@88] 07/18/2026 22:37:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.75 [HeaterCheck.cs@67] 07/18/2026 22:37:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.75 [HeaterCheck.cs@67] 07/18/2026 22:37:13 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9947605. Loops = 44. [McuMovementClient.cs@475] 07/18/2026 22:37:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9947605. Loops = 44. GC duration = 00:00:00.3076965. SinceCollect=00:01:00.7018515. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:37:13 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (205 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:37:13 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=5187, gen1=533, gen2=58, LatencyMode=Interactive, FreeMemory=5885411328, Live=452178720, HeapSizeBytes=503374840, FragmentedBytes=51783888, TotalCommittedBytes=511688704, PinnedObjectsCount=24, MemoryLoadBytes=2619687567, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:37:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:37:13 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:37:14 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:14 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber1=131.25 that are outside of set tolerance 10 for current step target 141.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:37:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1352.0658246, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 6.018646191268545, Elapsed = 00:22:32.0841328, TimeTotal = 06:14:24.9213433, Remaining = 05:51:52.8372105, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:34:53.1993261, WeightTotalEstimate = 01:34:53.1993261, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:09.9030351, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:32.0841328, HeatingEstimate = 00:47:27.9341754, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:08:45.0524571, WeightEstimate = 01:34:53.1993261 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:37:15 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.018646191268545;StartedAtUtc;00:22:32.0841328;06:14:24.9213433;05:51:52.8372105;False;110;0;0;00:00:00;01:34:53.1993261;01:34:53.1993261;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:09.9030351;00:00:00;02:00:00;00:22:32.0841328;00:47:27.9341754;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:08:45.0524571 [PrintingService.cs@1918] 07/18/2026 22:37:15 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=142.28571428571428,printChamber1=142.28571428571428,printChamber2=142.28571428571428,printChamber3=142.28571428571428,printChamber4=142.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:37:15 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 142.28572 with temperature 137.07142639160156 [HeaterCheck.cs@88] 07/18/2026 22:37:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 142.28572 with temperature 137.32142639160156 [HeaterCheck.cs@67] 07/18/2026 22:37:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.75 [HeaterCheck.cs@67] 07/18/2026 22:37:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.75 [HeaterCheck.cs@67] 07/18/2026 22:37:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 142.28572 with temperature 138 [HeaterCheck.cs@67] 07/18/2026 22:37:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1358.0694684, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 6.045370506725173, Elapsed = 00:22:38.0877262, TimeTotal = 06:14:24.9212929, Remaining = 05:51:46.8335667, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:34:53.1993261, WeightTotalEstimate = 01:34:53.1993261, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:09.9030351, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:38.0877262, HeatingEstimate = 00:47:21.9305316, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:08:45.0524571, WeightEstimate = 01:34:53.1993261 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:37:21 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.045370506725173;StartedAtUtc;00:22:38.0877262;06:14:24.9212929;05:51:46.8335667;False;110;0;0;00:00:00;01:34:53.1993261;01:34:53.1993261;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:09.9030351;00:00:00;02:00:00;00:22:38.0877262;00:47:21.9305316;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:08:45.0524571 [PrintingService.cs@1918] 07/18/2026 22:37:21 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=143.28571428571428,printChamber1=143.28571428571428,printChamber2=143.28571428571428,printChamber3=143.28571428571428,printChamber4=143.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:37:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 53.285713 with temperature 49 [HeaterCheck.cs@67] 07/18/2026 22:37:22 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:23 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 143.28572 with temperature 138.5 [HeaterCheck.cs@67] 07/18/2026 22:37:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] within range of 143.28572 with temperature 138.75 [HeaterCheck.cs@67] 07/18/2026 22:37:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1364.0729412, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 6.072094326614331, Elapsed = 00:22:44.0912121, TimeTotal = 06:14:24.9213060, Remaining = 05:51:40.8300939, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:34:53.1993261, WeightTotalEstimate = 01:34:53.1993261, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:09.9030351, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:22:44.0912121, HeatingEstimate = 00:47:15.9270588, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:08:45.0524571, WeightEstimate = 01:34:53.1993261 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:08. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:37:27 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.072094326614331;StartedAtUtc;00:22:44.0912121;06:14:24.9213060;05:51:40.8300939;False;110;0;0;00:00:00;01:34:53.1993261;01:34:53.1993261;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:09.9030351;00:00:00;02:00:00;00:22:44.0912121;00:47:15.9270588;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:08:45.0524571 [PrintingService.cs@1918] 07/18/2026 22:37:27 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=144.28571428571428,printChamber1=144.28571428571428,printChamber2=144.28571428571428,printChamber3=144.28571428571428,printChamber4=144.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:37:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:27 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:28 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 53.285713 with temperature 49.75 [HeaterCheck.cs@67] 07/18/2026 22:37:29 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.07156372070312, Elapsed=00:00:27.5111310 [ControlledHeating.cs@486] 07/18/2026 22:37:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218845, estimate=67.19366434583242 for layer 72, Z=7.201 [PrintingService.cs@1524] 07/18/2026 22:37:29 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 43, island count 7 [PrintingService.cs@1569] 07/18/2026 22:37:29 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 73, start=0, count=110, Z=7.301 [PrintingService.cs@1518] 07/18/2026 22:37:30 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 694, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:37:30 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.75 [HeaterCheck.cs@67] 07/18/2026 22:37:31 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.33738708496094 after 00:00:30.5120048 [ControlledHeating.cs@493] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0257266. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0632021. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0909066. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1106841. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:37:32 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 302125914679 (302125914679 @ 0) for mcu = 2503.185635 [18/07/2026 21:36:38] (2517.7159556583333 sec) to 304577107588 (from now=304457107588, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 302125914679 (302125914679 @ 0) for mcu = 2503.185635 [18/07/2026 21:36:38] (2517.7159556583333 sec) to 304577107588 (from external timestamp, flags=None, requested=304577107588 (304577107588 @ 0) for mcu = 2523.612484 [18/07/2026 21:36:58] (2538.1425632333335 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 302125914679 (302125914679 @ 0) for mcu = 2503.185635 [18/07/2026 21:36:38] (2517.7159556583333 sec) to 304577107588 (from external timestamp, flags=None, requested=304577107588 (304577107588 @ 0) for mcu = 2523.612484 [18/07/2026 21:36:58] (2538.1425632333335 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:37:32 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:37:33 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=133 that are outside of set tolerance 10 for current step target 144.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:37:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 49.25 [HeaterCheck.cs@67] 07/18/2026 22:37:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 144.28572 with temperature 139.5 [HeaterCheck.cs@67] 07/18/2026 22:37:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 144.28572 with temperature 139.5 [HeaterCheck.cs@67] 07/18/2026 22:37:39 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-surface for heaters surface=156.72238159179688 that are outside of set tolerance 10 for current step target 168 and final target 168 [ControlledHeating.cs@205] 07/18/2026 22:37:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 144.28572 with temperature 140.25 [HeaterCheck.cs@67] 07/18/2026 22:37:40 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber1 [HysteresisHeater] within range of 144.28572 with temperature 140.25 [HeaterCheck.cs@67] 07/18/2026 22:37:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:43 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9990271. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2218929. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:37:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:37:43 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:37:44 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.28572 with temperature 139.5 [HeaterCheck.cs@67] 07/18/2026 22:37:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 144.28572 with temperature 140.25 [HeaterCheck.cs@67] 07/18/2026 22:37:49 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:52 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 53.285713 with temperature 48.5 [HeaterCheck.cs@67] 07/18/2026 22:37:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=54.285714285714285,powderChamber1=54.285714285714285,powderChamber2=54.285714285714285,powderChamber3=54.285714285714285,powderChamber4=54.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:37:57 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 54.285713 with temperature 49.25 [HeaterCheck.cs@88] 07/18/2026 22:37:59 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.2359619140625, Elapsed=00:00:27.2162561 [ControlledHeating.cs@486] 07/18/2026 22:38:02 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.13002014160156 after 00:00:30.2161878 [ControlledHeating.cs@493] 07/18/2026 22:38:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:38:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2443639. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:38:02 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0613222. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3114915. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3242525. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:38:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 305788628816 (305788628816 @ 0) for mcu = 2533.708611 [18/07/2026 21:37:08] (2548.238573466667 sec) to 308202597331 (from now=308082597331, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 305788628816 (305788628816 @ 0) for mcu = 2533.708611 [18/07/2026 21:37:08] (2548.238573466667 sec) to 308202597331 (from external timestamp, flags=None, requested=308202597331 (308202597331 @ 0) for mcu = 2553.825259 [18/07/2026 21:37:28] (2568.3549777583335 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 305788628816 (305788628816 @ 0) for mcu = 2533.708611 [18/07/2026 21:37:08] (2548.238573466667 sec) to 308202597331 (from external timestamp, flags=None, requested=308202597331 (308202597331 @ 0) for mcu = 2553.825259 [18/07/2026 21:37:28] (2568.3549777583335 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] within range of 144.28572 with temperature 139.2857208251953 [HeaterCheck.cs@67] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284087, estimate=76.11929197741819 for layer 73, Z=7.301 [PrintingService.cs@1524] 07/18/2026 22:38:03 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=43.75 that are outside of set tolerance 10 for current step target 54.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 44, island count 7 [PrintingService.cs@1569] 07/18/2026 22:38:03 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 74, start=0, count=110, Z=7.401 [PrintingService.cs@1518] 07/18/2026 22:38:03 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 694, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:38:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1404.0863542, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 6.244236702499982, Elapsed = 00:23:24.1046063, TimeTotal = 06:14:46.4090392, Remaining = 05:51:22.3044329, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:35:14.6870781, WeightTotalEstimate = 01:35:14.6870781, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:31.3907871, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:23:24.1046063, HeatingEstimate = 00:46:35.9136458, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:09:06.5402091, WeightEstimate = 01:35:14.6870781 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:38:07 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.244236702499982;StartedAtUtc;00:23:24.1046063;06:14:46.4090392;05:51:22.3044329;False;110;0;0;00:00:00;01:35:14.6870781;01:35:14.6870781;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:31.3907871;00:00:00;02:00:00;00:23:24.1046063;00:46:35.9136458;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:09:06.5402091 [PrintingService.cs@1918] 07/18/2026 22:38:07 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=145.28571428571428,printChamber1=145.28571428571428,printChamber2=145.28571428571428,printChamber3=145.28571428571428,printChamber4=145.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:38:07 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1244846 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:38:09 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:13 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber3=134.75 that are outside of set tolerance 10 for current step target 145.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:38:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9925790. Loops = 44. [McuMovementClient.cs@475] 07/18/2026 22:38:14 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (169 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:38:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9925790. Loops = 44. GC duration = 00:00:00.2916380. SinceCollect=00:01:00.7255475. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:38:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=5329, gen1=543, gen2=59, LatencyMode=Interactive, FreeMemory=5877448704, Live=452598088, HeapSizeBytes=505058808, FragmentedBytes=52932920, TotalCommittedBytes=514064384, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:38:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:38:14 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:38:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1411.0868085, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 6.27536865149508, Elapsed = 00:23:31.1050639, TimeTotal = 06:14:46.4090425, Remaining = 05:51:15.3039786, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:35:14.6870781, WeightTotalEstimate = 01:35:14.6870781, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:31.3907871, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:23:31.1050639, HeatingEstimate = 00:46:28.9131915, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:09:06.5402091, WeightEstimate = 01:35:14.6870781 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:38:14 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.27536865149508;StartedAtUtc;00:23:31.1050639;06:14:46.4090425;05:51:15.3039786;False;110;0;0;00:00:00;01:35:14.6870781;01:35:14.6870781;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:31.3907871;00:00:00;02:00:00;00:23:31.1050639;00:46:28.9131915;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:09:06.5402091 [PrintingService.cs@1918] 07/18/2026 22:38:14 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=146.28571428571428,printChamber1=146.28571428571428,printChamber2=146.28571428571428,printChamber3=146.28571428571428,printChamber4=146.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:38:18 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.75 [HeaterCheck.cs@67] 07/18/2026 22:38:19 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:20 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=135.5 that are outside of set tolerance 10 for current step target 146.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:38:21 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber4 [HysteresisHeater] no longer approaching new target of 54.285713 with temperature 41.25 [HeaterCheck.cs@111] 07/18/2026 22:38:24 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 146.28572 with temperature 141.5 [HeaterCheck.cs@67] 07/18/2026 22:38:25 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.75 [HeaterCheck.cs@67] 07/18/2026 22:38:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1423.095531, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 6.328773014165952, Elapsed = 00:23:43.1137874, TimeTotal = 06:14:46.4090435, Remaining = 05:51:03.2952561, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:35:14.6870781, WeightTotalEstimate = 01:35:14.6870781, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:31.3907871, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:23:43.1137874, HeatingEstimate = 00:46:16.9044690, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:09:06.5402091, WeightEstimate = 01:35:14.6870781 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:38:26 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.328773014165952;StartedAtUtc;00:23:43.1137874;06:14:46.4090435;05:51:03.2952561;False;110;0;0;00:00:00;01:35:14.6870781;01:35:14.6870781;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:31.3907871;00:00:00;02:00:00;00:23:43.1137874;00:46:16.9044690;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:09:06.5402091 [PrintingService.cs@1918] 07/18/2026 22:38:26 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=147.28571428571428,printChamber1=147.28571428571428,printChamber2=147.28571428571428,printChamber3=147.28571428571428,printChamber4=147.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:38:26 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber4 [HysteresisHeater] approaching new target of 147.28572 with temperature 142 [HeaterCheck.cs@88] 07/18/2026 22:38:29 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 50.25 [HeaterCheck.cs@67] 07/18/2026 22:38:30 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.03016662597656, Elapsed=00:00:27.5073961 [ControlledHeating.cs@486] 07/18/2026 22:38:32 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=136.5 that are outside of set tolerance 10 for current step target 147.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.05506896972656 after 00:00:30.5079037 [ControlledHeating.cs@493] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0270847. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0633100. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.0948008. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:19.1094552. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:38:33 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 309414118559 (309414118559 @ 0) for mcu = 2563.921392 [18/07/2026 21:37:38] (2578.450987991667 sec) to 311863882230 (from now=311743882230, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 309414118559 (309414118559 @ 0) for mcu = 2563.921392 [18/07/2026 21:37:38] (2578.450987991667 sec) to 311863882230 (from external timestamp, flags=None, requested=311863882230 (311863882230 @ 0) for mcu = 2584.336336 [18/07/2026 21:37:59] (2598.86568525 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 309414118559 (309414118559 @ 0) for mcu = 2563.921392 [18/07/2026 21:37:38] (2578.450987991667 sec) to 311863882230 (from external timestamp, flags=None, requested=311863882230 (311863882230 @ 0) for mcu = 2584.336336 [18/07/2026 21:37:59] (2598.86568525 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:38:33 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:35 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:36 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=218847, estimate=67.25906270518897 for layer 74, Z=7.401 [PrintingService.cs@1524] 07/18/2026 22:38:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 45, island count 7 [PrintingService.cs@1569] 07/18/2026 22:38:37 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 75, start=0, count=110, Z=7.501 [PrintingService.cs@1518] 07/18/2026 22:38:37 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 694, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:38:38 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:39 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:41 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:42 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.75 [HeaterCheck.cs@67] 07/18/2026 22:38:43 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1440.0946906, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 6.404374668844339, Elapsed = 00:24:00.1129486, TimeTotal = 06:14:46.3944267, Remaining = 05:50:46.2814781, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:35:14.6724597, WeightTotalEstimate = 01:35:14.6724597, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:31.3761687, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:00.1129486, HeatingEstimate = 00:45:59.9053094, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:09:06.5255907, WeightEstimate = 01:35:14.6724597 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:38:43 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.404374668844339;StartedAtUtc;00:24:00.1129486;06:14:46.3944267;05:50:46.2814781;False;110;0;0;00:00:00;01:35:14.6724597;01:35:14.6724597;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:31.3761687;00:00:00;02:00:00;00:24:00.1129486;00:45:59.9053094;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:09:06.5255907 [PrintingService.cs@1918] 07/18/2026 22:38:43 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=148.28571428571428,printChamber1=148.28571428571428,printChamber2=148.28571428571428,printChamber3=148.28571428571428,printChamber4=148.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:38:44 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:10.9984352. Loops = 44. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:30.2167640. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:38:44 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:38:44 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:38:46 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.285713 with temperature 49.75 [HeaterCheck.cs@67] 07/18/2026 22:38:47 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:48 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.75 [HeaterCheck.cs@67] 07/18/2026 22:38:49 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber2=137.5 that are outside of set tolerance 10 for current step target 148.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:38:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1447.0959963, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 6.435510407276334, Elapsed = 00:24:07.1142535, TimeTotal = 06:14:46.3944259, Remaining = 05:50:39.2801724, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:35:14.6724597, WeightTotalEstimate = 01:35:14.6724597, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:31.3761687, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:07.1142535, HeatingEstimate = 00:45:52.9040037, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:09:06.5255907, WeightEstimate = 01:35:14.6724597 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:38:50 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.435510407276334;StartedAtUtc;00:24:07.1142535;06:14:46.3944259;05:50:39.2801724;False;110;0;0;00:00:00;01:35:14.6724597;01:35:14.6724597;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:31.3761687;00:00:00;02:00:00;00:24:07.1142535;00:45:52.9040037;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:09:06.5255907 [PrintingService.cs@1918] 07/18/2026 22:38:50 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=149.28571428571428,printChamber1=149.28571428571428,printChamber2=149.28571428571428,printChamber3=149.28571428571428,printChamber4=149.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:38:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printBed [HysteresisHeater] approaching new target of 149.28572 with temperature 143.14285278320312 [HeaterCheck.cs@88] 07/18/2026 22:38:50 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:51 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber3 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:54 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:55 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 50.25 [HeaterCheck.cs@67] 07/18/2026 22:38:56 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 49.5 [HeaterCheck.cs@67] 07/18/2026 22:38:56 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=139 that are outside of set tolerance 10 for current step target 149.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1454.0953102, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 6.466637268359955, Elapsed = 00:24:14.1135619, TimeTotal = 06:14:46.3944204, Remaining = 05:50:32.2808585, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:35:14.6724597, WeightTotalEstimate = 01:35:14.6724597, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:31.3761687, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:14.1135619, HeatingEstimate = 00:45:45.9046898, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:09:06.5255907, WeightEstimate = 01:35:14.6724597 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:38:57 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.466637268359955;StartedAtUtc;00:24:14.1135619;06:14:46.3944204;05:50:32.2808585;False;110;0;0;00:00:00;01:35:14.6724597;01:35:14.6724597;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:31.3761687;00:00:00;02:00:00;00:24:14.1135619;00:45:45.9046898;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:09:06.5255907 [PrintingService.cs@1918] 07/18/2026 22:38:57 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=150.28571428571428,printChamber1=150.28571428571428,printChamber2=150.28571428571428,printChamber3=150.28571428571428,printChamber4=150.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:39:00 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Will be performing heating layers LayersTemperatureStart=40, LayersTemperatureEnd=0, LayersPeriod=00:00:30, SurfaceTemp=167.23272705078125, Elapsed=00:00:27.2155593 [ControlledHeating.cs@486] 07/18/2026 22:39:01 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 50 [HeaterCheck.cs@67] 07/18/2026 22:39:02 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 50 [HeaterCheck.cs@67] 07/18/2026 22:39:03 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printChamber4=139.5 that are outside of set tolerance 10 for current step target 150.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Queing heating layer at temperature 167.17930603027344 after 00:00:30.2163212 [ControlledHeating.cs@493] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.2417658. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0624872. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3073077. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. Raw movement duration = 00:00:00.0100000. Loops = 1. HasTimingCriticalCommandsScheduled=False. ShouldCollectGarbage=False. SinceCollect=00:00:49.3196491. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@491] 07/18/2026 22:39:03 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - LayerMoves: LayerThickness=0, PowderVolume=0, PrevLayerFillRatio=0: Z1=0, Z2=0, ZMove=700, UseLoweredSpeed=False, RecoaterPowderSpeedFactor=1, RecoaterPrintSpeedFactor=1, SinteredVolumeMultiplier=1, VolumeFactor=1, RecoatPasses=1, RecoaterMaxDistance=0, PowderBedDivision=Thickness, ShakeFactor=0, ShakeBackoff=70 [LayerClient.cs@761] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer - Sums: { BedPrep = { Z1 = 0, Z2 = 0 }, PrintCap = { Z1 = 0, Z2 = 0 }, BeginLayer = { Z1 = 0, Z2 = 0 } } [LayerClient.cs@969] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z1 (pin=mcu:P2.2) clock moved from 313075403458 (313075403458 @ 0) for mcu = 2594.432483 [18/07/2026 21:38:09] (2608.961695483333 sec) to 315489031682 (from now=315369031682, flags=None, requested=empty, advance=0, minQueueAheadDuration=00:00:00) [McuStepper.cs@837] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper z2 (pin=mcu:P0.19) clock moved from 313075403458 (313075403458 @ 0) for mcu = 2594.432483 [18/07/2026 21:38:09] (2608.961695483333 sec) to 315489031682 (from external timestamp, flags=None, requested=315489031682 (315489031682 @ 0) for mcu = 2614.546294 [18/07/2026 21:38:29] (2629.0752640166666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.McuClient.Pins.McuStepper] [0] Resetting stepper r (pin=mcu:P0.22) clock moved from 313075403458 (313075403458 @ 0) for mcu = 2594.432483 [18/07/2026 21:38:09] (2608.961695483333 sec) to 315489031682 (from external timestamp, flags=None, requested=315489031682 (315489031682 @ 0) for mcu = 2614.546294 [18/07/2026 21:38:29] (2629.0752640166666 sec), advance=0) [McuStepper.cs@843] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - begin [McuMovementClient.cs@393] 07/18/2026 22:39:03 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 50 [HeaterCheck.cs@67] 07/18/2026 22:39:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 54.285713 with temperature 50.5 [HeaterCheck.cs@67] 07/18/2026 22:39:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Updating progress: PrintingStatus { Phase = Heating, PhaseDone = 1462.094199, PhaseTotal = 4200, Estimate = PrintingEstimate { StartedAtUtc = 18/07/2026 21:14:41, Progress = 6.502209398771071, Elapsed = 00:24:22.1124515, TimeTotal = 06:14:46.3944212, Remaining = 05:50:24.2819697, Incomplete = False, SoftCount = 110, LayerPrintDone = 0, WeightsDone = 0, WeightDone = 00:00:00, WeightTotal = 01:35:14.6724597, WeightTotalEstimate = 01:35:14.6724597, LayerRecoatElapsed = 00:00:00, LayerRecoatDelays = 00:00:00, LayerRecoatPrintLayersElapsed = 00:00:00, LayerRecoatNoDelayAverage = 00:00:15.4713921, StreamingElapsed = 00:00:00, ObjectLayerOverheadAverageDuration = 00:00:00.0272165, TimeLayers = 03:04:31.3761687, CoolingElapsed = 00:00:00, CoolingEstimate = 02:00:00, HeatingElapsed = 00:24:22.1124515, HeatingEstimate = 00:45:37.9058010, HeatingEstimate2 = 00:00:00, HeatingEstimate3 = 00:00:15, CoolingFrom = 174, BedPreparationElapsed = 00:00:00, BedPreparationTotal = 00:40:01.2809730, PrintCapElapsed = 00:00:00, PrintCapTotal = 00:15:23.5696050, JobElapsed = 00:00:00, JobTotal = 02:09:06.5255907, WeightEstimate = 01:35:14.6724597 }, JobName = D638 Type 4 2026_07_18 }. UTC calculatedEstimate: 07/19/2026 03:29:29. coolingEstimate=02:00:00 [PrintingService.cs@1912] 07/18/2026 22:39:05 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Estimate CSV: 6.502209398771071;StartedAtUtc;00:24:22.1124515;06:14:46.3944212;05:50:24.2819697;False;110;0;0;00:00:00;01:35:14.6724597;01:35:14.6724597;00:00:00;00:00:00;00:00:00;00:00:15.4713921;00:00:00;00:00:00.0272165;03:04:31.3761687;00:00:00;02:00:00;00:24:22.1124515;00:45:37.9058010;00:00:00;00:00:15;174;00:00:00;00:40:01.2809730;00:00:00;00:15:23.5696050;00:00:00;02:09:06.5255907 [PrintingService.cs@1918] 07/18/2026 22:39:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-print step target on printBed=151.28571428571428,printChamber1=151.28571428571428,printChamber2=151.28571428571428,printChamber3=151.28571428571428,printChamber4=151.28571428571428 [ControlledHeating.cs@169] 07/18/2026 22:39:05 DBUG [SLS4All.Compact.Temperature.ControlledHeating] [0] Setting heat-up-powder step target on powderBed=55.285714285714285,powderChamber1=55.285714285714285,powderChamber2=55.285714285714285,powderChamber3=55.285714285714285,powderChamber4=55.285714285714285 [ControlledHeating.cs@169] 07/18/2026 22:39:05 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] approaching new target of 55.285713 with temperature 49.5 [HeaterCheck.cs@88] 07/18/2026 22:39:08 DBUG [SLS4All.Compact.Temperature.Mlx90640Camera] [0] Read 360 samples in 00:01:00.1214949 ~ 5.99 samples/sec, 9 resets, 0 ignored frames) [Mlx90640Camera.cs@313] 07/18/2026 22:39:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Processed edges count=284094, estimate=76.20508727113645 for layer 75, Z=7.501 [PrintingService.cs@1524] 07/18/2026 22:39:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Min max-depth 46, island count 7 [PrintingService.cs@1569] 07/18/2026 22:39:09 INFO [SLS4All.Compact.Printing.PrintingService] [0] Processing layer 76, start=0, count=110, Z=7.601 [PrintingService.cs@1518] 07/18/2026 22:39:09 DBUG [SLS4All.Compact.Printing.PrintingService] [0] Input edges 694, instances=14 (object-per-object) [PrintingService.cs@263] 07/18/2026 22:39:10 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.285713 with temperature 50.5 [HeaterCheck.cs@67] 07/18/2026 22:39:11 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.285713 with temperature 51 [HeaterCheck.cs@67] 07/18/2026 22:39:11 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-print for heaters printBed=140.64285278320312,printChamber1=140.5 that are outside of set tolerance 10 for current step target 151.28571428571428 and final target 172 [ControlledHeating.cs@205] 07/18/2026 22:39:11 INFO [SLS4All.Compact.Temperature.ControlledHeating] [0] Waiting while running heat-up-powder for heaters powderChamber4=44.75 that are outside of set tolerance 10 for current step target 55.285714285714285 and final target 145 [ControlledHeating.cs@205] 07/18/2026 22:39:12 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber2 [HysteresisHeater] within range of 151.28572 with temperature 146.5 [HeaterCheck.cs@67] 07/18/2026 22:39:14 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - GC. Raw movement duration = 00:00:10.9928982. Loops = 44. [McuMovementClient.cs@475] 07/18/2026 22:39:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] Finish movement - end. HasCollected = True, MajorCleanup = False, Raw movement duration = 00:00:10.9928982. Loops = 44. GC duration = 00:00:00.3079562. SinceCollect=00:01:00.7341848. CreatedCommands=0. CreatedArenas=0. XYLStats=XYLStats { XYSource = 0, XYCompressed = 0, LSource = 0, LCompressed = 0 } [McuMovementClient.cs@478] 07/18/2026 22:39:15 DBUG [SLS4All.Compact.Movement.McuMovementClient] [0] GC: gen0=5485, gen1=557, gen2=60, LatencyMode=Interactive, FreeMemory=5871812608, Live=452521464, HeapSizeBytes=503678440, FragmentedBytes=51761872, TotalCommittedBytes=514588672, PinnedObjectsCount=24, MemoryLoadBytes=2704193617, HighMemoryLoadThresholdBytes=7605544550, Compacted=True, Concurrent=False [PrinterGC.cs@152] 07/18/2026 22:39:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Setting and waiting for surface temperature to settle (target=(null), hasSetTarget=(null), hasSettleIncrease=False, delay=00:00:00, keep=True) [LayerClient.cs@1279] 07/18/2026 22:39:15 INFO [SLS4All.Compact.Movement.LayerClient] [0] BeginLayer: Completed [LayerClient.cs@310] 07/18/2026 22:39:15 DBUG [SLS4All.Compact.Temperature.SoftAnalysisSurfaceHeater] [0] Soft heater seems to be lagging behind real-time (229 cases) [SoftAnalysisSurfaceHeater.cs@800] 07/18/2026 22:39:16 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater powderChamber1 [HysteresisHeater] within range of 55.285713 with temperature 50.5 [HeaterCheck.cs@67] 07/18/2026 22:39:17 DBUG [SLS4All.Compact.McuClient.Sensors.HeaterCheck] [0] Heater printChamber3 [HysteresisHeater] within range of 151.28572 with temperature 147 [HeaterCheck.cs@67]