--- library_name: lerobot tags: [robotics, lerobot, franka, imitation-learning, dit_clip] --- # model50 DiT (CLIP ViT-B/16 + AdaLN-Zero diffusion transformer, DDPM 100 steps, epsilon prediction) policy for a real Franka Panda two-object insertion task: pick a yellow slotted cylinder and insert it into the round hole of a white board, then insert a green stepped block into the stepped square hole, then return home. - Training data: 73 SpaceMouse teleop demos (69 train / 4 val episodes, 101,675 train frames at 20 Hz), LeRobot v3 dataset `jalal06/real-franka-insertion` (not on the Hub yet). - Checkpoint: step 57,770 of run `dit_real73_b88_h18e16`, about 50 passes over the training frames (batch 88). - Inputs: `observation.state` = 7 joint positions (rad) + gripper width (m); `observation.images.main` and `observation.images.wrist` (400x224 RGB, resized to 224x224 inside the CLIP encoder); 2 observation frames. - Outputs: chunks of 18 actions, 16 executed per chunk; each action = 7 absolute joint-position targets (rad) + gripper command (-1 open, +1 close), for a joint-impedance controller at 20 Hz. - Normalization: saved LeRobot pre/post-processors (min-max stats from the train episodes). Loading needs LeRobot 0.5.2 and the `lerobot_policy_ebt` plugin (registers the `ebt` and `dit_clip` policy types). `config.json` points `clip_name` at a local copy of `openai/clip-vit-base-patch16`; set it to `openai/clip-vit-base-patch16` (or your local path) before loading on another machine.