ALIENX · FLOW LAB 3D
a 32³ neural operator vs a Navier–Stokes spectral solver — Taylor–Green turbulence
"It was trained on three Reynolds numbers. This one it has never seen."
Re = 900. Zero-shot. 5.7% rollout RMSE over 25 steps.
Left: pointwise MSE of the autoregressive rollout against the spectral DNS truth, at Re=900 (a value outside training {300, 628, 1200}). The dashed line is the same run with QSA's complex phase channel severed (gi=0) — the phase carries the predictive signal, ~5× degradation when cut. Right: kinetic energy — the vortex decay the network reproduces. Every step is divergence-free by construction (Biot–Savart recovery): max |∇·u| ≈ 2×10⁻⁶, float32 round-off. A 421,507-parameter network holding a 32×32×32 turbulence field — no mesh, no grid, no Reynolds it met before.
"The mid-plane of the vortex."
|vorticity| at the mid-plane (z = 16 of 32) — solver (top) vs the operator (bottom), late in the rollout. The vortex filaments, their roll-up, and their decay were never memorized: the network carries them in complex attention phase, locally reframed SO(3) geometry, and an isotropic 26-neighbor stencil.
pip install alienx-labs → ax.load_turb3d() · paper: AlienX 3D · labs: Sigil Lab 2D · GP Lab
Turbulence without a grid. — Grimoire of Elbàlor · Eric Yaka · AGPL-3.0