# NexLab LIS Deployment Guide (Server PC) This guide helps you move the NexLab Laboratory System to a new PC and set it up as a server for other machines in the lab. ## Step 1: Copying the System 1. Locate the `NexLab_Published` folder created by the packager. 2. Copy this entire folder to your target PC (e.g., using a USB Drive). 3. Place it in a safe location (e.g., `C:\NexLab_LIS`). ## Step 2: One-Time Set Up (Target PC) 1. Open the `NexLab_Published` folder on the new PC. 2. Double-click `install_requirements.bat`. This will: - Create the virtual environment. - Install all Python libraries. - Download the PDF generation components (Playwright Chrome). - *Note: This requires internet access the first time.* ## Step 3: Running the System 1. Double-click `start_nexlab.bat`. 2. A window will open showing that the server is running. 3. You can access the system on this PC at: `http://localhost:8000` (or your chosen port). ## Extra: How to Change the Port If you need to change the port (e.g. to 5000 or 80): 1. Open `start_nexlab.bat` in Notepad. 2. Change the line `set "PORT=8000"` to your preferred number. 3. Save the file and restart the system. ## Step 4: Connecting from Other PCs 1. find the **IP Address** of the Server PC: - Open Command Prompt and type `ipconfig`. - Look for "IPv4 Address" (e.g., `192.168.1.50`). 2. On any other PC in the lab, open a browser and go to: `http://192.168.1.50:8000`. ## Step 5: (Optional) Automatic Start 1. To make the server start automatically when you log into Windows: 2. Double-click `add_to_startup.bat` once. --- ### Requirements for the Server PC: - Windows 10/11. - Python 3.10 or higher installed (one-time requirement for the environment setup). - Port 8000 allowed in Windows Firewall (if connecting from other PCs).