[
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "action bash",
    "cmd": "action bash command",
    "desc": "The action bash command specifies a Bash shell command to be run when an event handler is triggered."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "alias",
    "cmd": "alias alias_name command_name\nno alias alias_name\ndefault alias alias_name",
    "desc": "The alias command creates an alias for a CLI command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "bash",
    "cmd": "bash",
    "desc": "The bash command starts the Linux Bash shell."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "comment (various configuration modes)",
    "cmd": "comment comment_text EOF\nno comment\ndefault comment !! comment_text",
    "desc": "The comment command adds a comment for the active configuration mode to running-config."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "configure (configure terminal)",
    "cmd": "configure [terminal]",
    "desc": "The configure command places the switch in the Global Configuration mode to configure features at the system level."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "configure checkpoint",
    "cmd": "configure checkpoint {restore checkpoint_name | save [checkpoint_name]}",
    "desc": "The configure checkpoint command saves the running configuration to a checkpoint file."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "configure convert",
    "cmd": "configure convert new-syntax",
    "desc": "The configure convert command converts the current configuration syntax to the specified syntax."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "configure network",
    "cmd": "configure network",
    "desc": "The configure network command is deprecated."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "copy running-config",
    "cmd": "copy running-config DESTINATION",
    "desc": "The current operating configuration of the switch is stored in a virtual file called running-config."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "daemon",
    "cmd": "daemon daemon_name\nno daemon daemon_name\ndefault daemon daemon_name",
    "desc": "The daemon command accesses daemon configuration mode for adding or removing external daemons and scripts, which are then managed by ProcMgr."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "delay",
    "cmd": "delay seconds",
    "desc": "The delay command specifies the time in seconds the system will delay between a triggering event and the execution of an event handler action."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "dir",
    "cmd": "dir [SCOPE][FILE TYPE]",
    "desc": "The dir command displays a list of files on a file system."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "disable",
    "cmd": "disable [PRIVILEGE_LEVEL]",
    "desc": "The disable command exchanges the session’s current command mode with the specified privilege level."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "enable",
    "cmd": "enable [PRIVILEGE_LEVEL]",
    "desc": "The enable command places the switch in Privileged EXEC mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "end",
    "cmd": "end",
    "desc": "The end command exits to Privileged Exec mode from any Configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "event-handler DropCountersHandler",
    "cmd": "event-handler DropCountersHandler\nno event-handler DropCountersHandler\ndefault event-handler DropCountersHandler",
    "desc": "The event-handler DropCountersHandler command enables the adverse drop counters monitor with event handlers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "event-handler",
    "cmd": "event-handler name\nno event-handler name\ndefault event-handler name",
    "desc": "An event handler executes a Linux Bash shell command in response to a specific system event."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "exit",
    "cmd": "exit",
    "desc": "The exit command places the switch in the parent of the command mode from which the exit command was entered."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip ftp client source-interface",
    "cmd": "ip ftp [client] source-interface INTERFACE [vrf vrf_name]\nno ip ftp [client] source-interface\ndefault ip ftp [client] source-interface",
    "desc": "By default, the FTP (File Transfer Protocol) source IP address is selected by the switch (the IP address of the source interface if one is assigned)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip http client local-interface",
    "cmd": "ip http client local-interface INTERFACE [vrf vrf_name]\nno ip http client local-interface\ndefault ip http client local-interface",
    "desc": "The ip http client local-interface command specifies the source IP address for hypertext transfer protocol (HTTP) connections."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip ssh client source-interface",
    "cmd": "ip ssh [client] source-interface INTERFACE [vrf vrf_name]\nno ip ssh [client] source-interface\ndefault ip ssh [client] source-interface",
    "desc": "The ip ssh client source-interface command specifies the source IP address for secure shell (SSH) connections."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip tftp client source-interface",
    "cmd": "ip tftp [client] source-interface INTERFACE [vrf vrf_name]\nno ip tftp [client] source-interface\ndefault ip tftp [client] source-interface",
    "desc": "The ip tftp client source-interface command specifies the source IP address for Trivial File Transfer Protocol (TFTP) connections."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "platform arad lag mode",
    "cmd": "platform arad lag mode [1024x16 | 256x64 | 512x32]",
    "desc": "The platform arad lag mode command allows configuration of LAGs with more than 16 members."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "platform sand fabric mode (7500 and 7500E Series)",
    "cmd": "platform sand fabric mode [MODE_SETTING]\nno platform sand fabric mode\ndefault platform sand fabric mode",
    "desc": "The platform sand fabric mode command specifies the fabric mode under which the switch operates after the next system reload."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "platform sand forwarding mode (7500 and 7500E Series)",
    "cmd": "platform sand forwarding mode [MODE_SETTING]\nno platform sand forwarding mode\ndefault platform sand forwarding mode",
    "desc": "The platform sand forwarding mode command specifies the forwarding compatibility mode under which the switch operates after the next system reload."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "platform sand lag hardware-only",
    "cmd": "platform sand lag hardware-only\nno platform sand lag hardware-only\ndefault platform sand lag hardware-only",
    "desc": "The platform sand lag hardware-only command specifies that all LAGs will use hardware resources including single member LAGs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "platform sand lag mode",
    "cmd": "platform sand lag mode [2048x8 | 1024x16 | 512x32 | 256x64 | 128x128 |",
    "desc": "The platform sand lag mode configures two Link Aggregation Groups (LAG) partitions, Partition A and Partition B, to support twice as many available Port Channels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "pwd",
    "cmd": "pwd",
    "desc": "The pwd command displays the working directory."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "schedule config",
    "cmd": "schedule config{max-concurrent-jobs limit | prepend-hostname-logfile}\nno schedule config {max-concurrent-jobs limit | prepend-hostname-logfile}\ndefault schedule config {max-concurrent-jobs limit | prepend-hostname-logfile}",
    "desc": "The schedule config command sets configuration parameters to the CLI scheduler."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "schedule",
    "cmd": "schedule schedule_name PERIOD {max-log-files count | timeout timeout_interval}{command cmd | logging\nverbose | loglocation flash:}\nno schedule schedule_name\ndefault schedule schedule_name",
    "desc": "The schedule command facilitates the periodic execution of a specified CLI command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show (various configuration modes)",
    "cmd": "show [DATA_TYPE]",
    "desc": "The show command, when executed within a configuration mode, can display data in running-config for the active configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show event-handler DropCountersHandler",
    "cmd": "show event-handler DropCountersHandler",
    "desc": "The show event-handler command displays details of the DropCountersHandler event handler."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show event-handler",
    "cmd": "show event-handler [handler_name]",
    "desc": "The show event-handler command displays the contents and activation history of a specified event handler or all event handlers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show module",
    "cmd": "show module [MODULE_NAME]",
    "desc": "The show module command displays information that identifies the supervisor, fabric, and linecard modules in a modular switch, including model number, serial number, hardware version number, software version"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform sand compatibility",
    "cmd": "show platform sand compatibility",
    "desc": "The show sand platform compatibility command displays the fabric and forwarding modes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show platform sand lag hardware-only",
    "cmd": "show platform sand lag hardware-only",
    "desc": "The show platform sand lag hardware-only command displays whether or not LAGs are hardware-only."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show schedule",
    "cmd": "show schedule {schedule_name | summary}",
    "desc": "The show schedule command displays logging output on the terminal during the current terminal session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "bytes",
    "cmd": "bytes",
    "desc": "ro301_thelp_2018-06-19."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show version",
    "cmd": "show version [INFO_LEVEL]",
    "desc": "The show version command displays information that identifies the switch, including its model number, serial number, and system MAC address."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "terminal length",
    "cmd": "terminal length lines\nno terminal length\ndefault terminal length",
    "desc": "The terminal length command overrides automatic pagination and sets pagination length for all show commands on a terminal."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "terminal monitor",
    "cmd": "terminal monitor\nno terminal monitor\ndefault terminal monitor",
    "desc": "The terminal monitor command enables the display of logging output on the terminal during the current terminal session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "trigger",
    "cmd": "trigger EVENT",
    "desc": "The trigger command specifies what event will trigger the event handler."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Boot Loader Aboot",
    "cmd": "Boot Loader Aboot",
    "desc": "Aboot is the boot loader for Arista switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "boot-config",
    "cmd": "boot-config",
    "desc": "The boot-config file is an ASCII file that Aboot uses to configure console communication settings, locate the EOS flash image, and specify initial network configuration settings."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "boot-config File Structure",
    "cmd": "boot-config File Structure",
    "desc": "Each line in the boot-config file specifies a configuration setting and has this format: NAME=VALUE • NAME is the parameter label."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "boot-config Command Line Content",
    "cmd": "boot-config Command Line Content",
    "desc": "Aboot configuration commands that boot-config files can contain include: • SWI specifies the location and file name of the EOS image file that Aboot loads when booting, using the same format as the boot command to designate a local or network path."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "running-config",
    "cmd": "running-config",
    "desc": "The running-config is a virtual file that contains the system’s operating configuration, formatted as a command sequence."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "startup-config",
    "cmd": "startup-config",
    "desc": "The startup-config file is stored in flash memory and contains the configuration the switch loads when booting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Redundancy Supervisor Protocols",
    "cmd": "Redundancy Supervisor Protocols",
    "desc": "There are three available supervisor redundancy protocols."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "System Reset",
    "cmd": "System Reset",
    "desc": "When a reset condition exists, Aboot can either reset the switch without user intervention or facilitate a manual reset through the Aboot shell."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "CONSOLESPEED",
    "cmd": "CONSOLESPEED",
    "desc": "The CONSOLESPEED command in the boot-config file specifies the console baud rate when the switch is booted."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "NET Commands",
    "cmd": "NET Commands",
    "desc": "Aboot uses NET commands in the boot-config file during switch booting to configure the network interface used for switch configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "install bios source",
    "cmd": "install bios source SOURCE [active | standby] [reload | now]",
    "desc": "install bios source command is used to install an Aboot Update File (AUF) to upgrade Aboot firmware."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "PASSWORD (ABOOT)",
    "cmd": "PASSWORD = encrypted_string",
    "desc": "PASSWORD specifies the Aboot password, as described in Accessing the Aboot Shell."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "SWI",
    "cmd": "SWI",
    "desc": "SWI specifies the location and file name of the EOS image file that Aboot loads when booting, using the same format as boot-config to designate a local or network path."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "boot console",
    "cmd": "boot console speed baud_rate",
    "desc": "The boot console command configures terminal settings for serial devices connecting to the console port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "boot secret",
    "cmd": "boot secret [ENCRYPT_TYPE] password\nno boot secret\ndefault boot secret",
    "desc": "The boot secret command creates or edits the Aboot shell password and stores the encrypted string in the PASSWORD command line of the boot-config file."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "boot system",
    "cmd": "boot system device file_path",
    "desc": "The boot system command specifies the location of the EOS software image that Aboot loads when the switch boots."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "delete startup-config",
    "cmd": "delete startup-config [CONFIRMATION]",
    "desc": "The delete startup-config command erases or deletes the startup-config file."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "protocol",
    "cmd": "protocol {rpr | simplex | sso}\nno protocol\ndefault protocol",
    "desc": "The protocol command configures how the supervisors on a modular switch will handle switchover events."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "redundancy",
    "cmd": "redundancy\nprotocol",
    "desc": "The redundancy command places the switch in redundancy configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "redundancy manual switchover",
    "cmd": "redundancy manual switchover",
    "desc": "The redundancy manual switchover command immediately switches control of the switch to the standby supervisor."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "reload",
    "cmd": "reload [TARGET] [CONFIRMATION]",
    "desc": "The reload command power cycles the switch and resets it under Aboot control."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "reload (scheduled)",
    "cmd": "reload cancel\nno reload\ndefault reload",
    "desc": "The reload (scheduled) command configures the switch to reset at a specified time or after a specified interval."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "securebootctl",
    "cmd": "securebootctl secureboot [-enable | -disable | -display]\nsecurebootctl cert [[-add path] -delete | -display]\nsecurebootctl aristacert [-disable | -enable | -display]\nsecurebootctl abootpassword [-disable | -enable | -display]",
    "desc": "The securebootctl command in the Privileged EXEC Mode manages and displays the status of Secure Boot on Arista switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform bios",
    "cmd": "show platform bios",
    "desc": "The show platform bios [history | detail] command displays the BIOS versions on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show redundancy file-replication",
    "cmd": "show redundancy file-replication",
    "desc": "The show redundancy file-replication command displays the status and last synchronization date of file replication between the supervisors on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show redundancy status",
    "cmd": "show redundancy status",
    "desc": "The show redundancy status command displays the current status (active or standby) and the configured redundancy protocol of both supervisors, and summary information about the latest switchover event."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show redundancy switchover sso",
    "cmd": "show redundancy switchover sso",
    "desc": "The show redundancy switchover sso command displays the number of stateful switchovers since the last reload and a log of the events in the latest stateful switchover."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show reload",
    "cmd": "show reload",
    "desc": "The show reload command displays the time and reason for any pending reload operation."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show reload cause",
    "cmd": "show reload cause",
    "desc": "The show reload cause command displays the reason for the most recent reload operation."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show reload fast-boot",
    "cmd": "show reload fast-boot",
    "desc": "The show reload fast-boot command verifies that the switch configuration is valid for Smart System Upgrade (SSU)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "commit timer",
    "cmd": "commit timer hh:mm:ss",
    "desc": "The commit timer command can automatically roll back changes performed during a configuration session if you haven't confirmed them within a preset time interval."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "configure replace",
    "cmd": "configure replace source_file_path:source_file_name [ignore-errors] [md5 md5sum] [skip-checkpoint]",
    "desc": "The configure replace command replaces the current configuration with a new configuration from the specified source."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "configure session",
    "cmd": "configure session [session_name] [abort | commit | [description description]]\nno configure session session_name\ndefault configure session",
    "desc": "The configure session command allows a series of temporary configuration changes and commits to running-config later by issuing the commit command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "idle-timeout (Console Management)",
    "cmd": "idle-timeout idle_period\nno idle-timeout\ndefault idle-timeout",
    "desc": "The idle-timeout (Console Management) command configures the idle-timeout period for console connection sessions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management accounts",
    "cmd": "management accounts",
    "desc": "The management accounts command enters the Accounts Management Configuration Mode and allows the creation of user accounts on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management api eos-sdk-rpc",
    "cmd": "management api eos-sdk-rpc\nno management api eos-sdk-rpc\ndefault management api eos-sdk-rpc",
    "desc": "The management api eos-sdk-rpc command places the switch in EOS SDK RPC API management configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management api external-services",
    "cmd": "management api external-services\nno management api external-services\ndefault management api external-services",
    "desc": "The management api external-services command places the switch in External Services API configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management api gnmi",
    "cmd": "management api gnmi\nno management api gnmi\ndefault management api gnmi",
    "desc": "The management api gnmi command places the switch in GNMI API Management configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management api gnsi",
    "cmd": "management api gnsi\nno management api gnsi\ndefault management api gnsi",
    "desc": "The management api gnsi command places the switch in GNSI API management configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management api gribi",
    "cmd": "management api gribi\nno management api gribi\ndefault management api gribi",
    "desc": "The management api gribi command places the switch in gRIBI API Management configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management api http-commands",
    "cmd": "management api http-commands\nno management api http-commands\ndefault management api http-commands",
    "desc": "The management api http-commands command places the switch in HTTP Commands API Management Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management api models",
    "cmd": "management api models\nno management api models\ndefault management api models",
    "desc": "The management api models command places the switch in Models API Management configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management api netconf",
    "cmd": "management api netconf\nno management api netconf\ndefault management api netconf",
    "desc": "The management api netconf command places the switch in Netconf API Management configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management api restconf",
    "cmd": "management api restconf\nno management api restconf\ndefault management api restconf",
    "desc": "The management api restconf command places the switch in Restconf API Management configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "management archive",
    "cmd": "management archive [destination flash:] [quotapct percentage] shutdown",
    "desc": "The management archive command enters the Archive Management Configuration Mode and allows you to manage log archives and archive space."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management cli",
    "cmd": "management cli command deprecated log",
    "desc": "The management cli command places the switch in CLI Management Configuration Mode and allows you to configure command line options."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management client",
    "cmd": "management client api gnmi [group group_name member server_name] [server",
    "desc": "The management client command enters the Client Management Configuration Mode and configures remote applications or scripts that utilize the switch powerful eAPI (EOS API) to programmatically send configuration and show commands."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management console",
    "cmd": "management console\nno management console\ndefault management console",
    "desc": "The management console command places the switch in Console Management Configuration Mode to adjust the idle-timeout period for console connection sessions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "management data source",
    "cmd": "management data source [disable] [sensor sensor_name [disabled | ip address\nip_address port port] [traffic-policies [disabled] [field-set [ipv4 prefix",
    "desc": "The management data source command enters the Data Source Management Configuration Mode and allows defining the rules and actions taken on specific data streams."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management defaults",
    "cmd": "management defaults secret hash [md5 | scrypt | sha-512 | yescrypt]",
    "desc": "The management defaults command enters the Defaults Management Configuration Mode and configures storing secrets on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management dmf",
    "cmd": "managment dmf [disabled] [controller address ip_address1 controller address\nip_address2",
    "desc": "The management dmf command in the DANZ Monitoring Fabric (DMF) Configuration Mode allows the configuration of up to two DMF controllers on the network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management file-systems",
    "cmd": "management file-systems nfs [crash: directory_name] [file: directory_name] [flash:",
    "desc": "The management file-systems command in the File Systems Management Configuration Mode allows the configuration and management of the file system on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "management http-server",
    "cmd": "management http-server [cors allowed-origin origin server_address | all | *]\nmanagement http-server default-services\nmanagement http-server header csp frame-ancestors uri\nmanagement http-server log-level [alert | crit | debug | emerg | error | info\nmanagement http-server protocol [http [localhost | port port_number]] [https\nmanagement http-server qos dscp dscp_value\nmanagement http-server vrf [default | vrf_name",
    "desc": "The management http-server command enters the HTTP Management Configuration Mode of the switch to allow Application Programming Interface (API) access to the switch for programmatic commands."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "management ldap group",
    "cmd": "management ldap [group policy policy_name group group_name role role_name [after |",
    "desc": "The management ldap command in the Global Configuration mode enters the switch into LDAP Management Configuration Mode and allows the configuration of an LDAP group and server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management ldap server",
    "cmd": "management ldap server [defaults [authorization group policy policy_name]\npassword password] [ssl-profile profile_name] [timeout seconds]] [host host_name\nport port_number vrf vrf_name]",
    "desc": "The management ldap server command enters the LDAP Management Configuration Mode and allows the configuration of an LDAP server for authentication on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management nic profiles",
    "cmd": "management nic profiles profile profile_name [connection [ssl profile",
    "desc": "The management nic profiles command enters the Network Interface Card (NIC) Profile Configuration Mode and allow configuration of an interface for an internal service client such as ZTP or an internal"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management package",
    "cmd": "management package repository repo_name [description description] [type description]",
    "desc": "The management package command in the Package Management Configuration Mode configures a remote source for downloading optional software extension packages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management security auto-certificate",
    "cmd": "management security auto-certificate [profile profile_name [digest [sha256 |\ninstance instance_name] [renewal seconds seconds]]\nmanagement security auto-certificate [protocol est profile_name [connection\nretry [count num_retries] [interval seconds seconds]] [credentials enroll [secret",
    "desc": "The management security auto-certificate command enters the Auto-Certificate Security Management Configuration Mode and automates the management and renewal of the digital certificates used by the switch for various secure management services such HTTPS for APIs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management security entropy",
    "cmd": "management security entropy source [cpu jitter] [hardware exclusive]",
    "desc": "The management security entropy command manages the source of cryptographic entropy (randomness) and provides high quality randomness for SSH keys, SSL/TLS certificates, and random session identifiers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management security network",
    "cmd": "management security network client protocol [ftp | http | tftp] disabled",
    "desc": "The management security network command enters the Security Management Configuration mode and then configures security policies that govern the access and behavior of various management applications on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management security ocsp",
    "cmd": "management security ocsp profile profile_name [chain certificate requirement\nresponder [all | leaf | none]] [extension nonce request [disabled |",
    "desc": "The management security ocsp command enters the Security Online Certificate Status Protocol (OCSP) Configuration Mode and quickly checks the revocations status of digital certificates used by management services such as HTTP or LDAP over TLS."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management security password",
    "cmd": "management security",
    "desc": "The management security password command enters the Security Management Configuration Mode and configures robust password policies for all local user accounts."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management security session",
    "cmd": "management security session shared-secret profile profile_name secret secret_name",
    "desc": "The management security session command enters the Security Management Configuration Mode and configures the session parameters that govern the behavior, timeouts, and security of interactive management sessions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "management security signature-verification",
    "cmd": "management security signature-verification extension ssl profile profile_name",
    "desc": "The management security signature-verification command enters the Security Management Configuration Mode and apply a named SSL profile that dictates the policies for verifying the integrity of the system files related to secure TLS/SSL communications."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "management security ssl",
    "cmd": "management security ssl [monitor expiry time [days | hours] [log interval time\nmanagement security ssl [profile profile_name [certificate cert_name [autocertificate cert_name] [common-name [key key_name] [username regexp regex]]\nip-address exact] [requirement [hostname match subject-alternative-name\nexpiry-date ignore]] [requirement [basic-constraint ca true] [hostname fqdn]]",
    "desc": "The management security ssl command enters the SSL Security Management Configuration mode to configure and manage the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) parameters for all secure management services on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management ssh",
    "cmd": "management ssh\nno management ssh\ndefault management ssh",
    "desc": "The management ssh command places the switch in SSH Management Configuration Mode to adjust SSH session connection parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "management telnet",
    "cmd": "management telnet\nno management telnet\ndefault management telnet",
    "desc": "The management telnet command places the switch in Telnet Management Configuration Mode to adjust Telnet session connection parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "protocol http (API Management)",
    "cmd": "protocol http [TCP_PORT]\nno protocol http\ndefault protocol http",
    "desc": "The protocol http command enables the hypertext transfer protocol (HTTP) server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "protocol https (API Management)",
    "cmd": "protocol https [TCP_PORT]\nno protocol https\ndefault protocol https",
    "desc": "The protocol https command enables the HTTP secure server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "protocol https certificate (API Management)",
    "cmd": "protocol https certificate\nno protocol https certificate\ndefault protocol https certificate",
    "desc": "The protocol https certificate command configures the HTTP secure server to request an X."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "reset system storage secure",
    "cmd": "reset system storage secure",
    "desc": "Use the reset system storage secure command to trigger the secure erase mechanism."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show inventory",
    "cmd": "show inventory",
    "desc": "The show inventory command displays the hardware components installed in the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "shutdown (API Management)",
    "cmd": "shutdown\nno shutdown\ndefault shutdown",
    "desc": "The shutdown command disables management over API on the switch in API Management Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "timeout",
    "cmd": "management [console | ssh | telnet] timeout timeout_period",
    "desc": "The timeout command in the SSH, Telnet, or Console Management Configuration Mode specifies the maximum length of a management session regardless of activity during the session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "vrf (API Management)",
    "cmd": "vrf VRF_INSTANCE",
    "desc": "The vrf command places the switch in the server's VRF configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "default",
    "cmd": "default",
    "desc": "Specifying DNS Addresses"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "vrf1",
    "cmd": "vrf1",
    "desc": "Specifying DNS Addresses"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "vrf1",
    "cmd": "ip domain lookup source-interface Vlan5",
    "desc": "fc00::1 default The switch assigns source IP addresses to outgoing DNS requests."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "System Clock and Time Protocols",
    "cmd": "System Clock and Time Protocols",
    "desc": "The switch uses the system clock to time-stamp all events, logs, and system messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "Network Time Protocol (NTP) Overview",
    "cmd": "Network Time Protocol (NTP) Overview",
    "desc": "EOS enables Network Time Protocol (NTP) on the switch by default, and time settings from any properly configured NTP server override the manual setting of the system clock."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "show ntp status",
    "cmd": "show ntp status",
    "desc": "The show ntp status command displays the status of NTP on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "System Event Logging",
    "cmd": "System Event Logging",
    "desc": "Arista switches log Event Notifications using the Syslog protocol."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "Event Monitor",
    "cmd": "Event Monitor",
    "desc": "The Event Monitor writes system event records to local files for access by SQLite database commands."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Description",
    "cmd": "Description",
    "desc": "The event monitor receives notifications for important events or changes to the enabled event monitor tables."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "banner login",
    "cmd": "banner login\nno banner login\ndefault banner login",
    "desc": "The banner login command configures a message that the switch displays before login and password prompts."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "banner motd",
    "cmd": "banner motd\nno banner motd\ndefault banner motd",
    "desc": "The banner motd command configures a message of the day (motd) that the switch displays after a user logs in."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "clear ptp interface counters",
    "cmd": "clear ptp interface [INTERFACE_NAME] counters",
    "desc": "The clear ptp interface counters command resets the Precision Time Protocol (PTP) packet counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "clock set",
    "cmd": "clock set hh:mm:ss date",
    "desc": "The clock set command sets the system clock time and date."
  },
  {
    "os": "eos",
    "role": "firewall",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "clock timezone",
    "cmd": "clock timezone zone_name\nno clock timezone\ndefault clock timezone",
    "desc": "The clock timezone command specifies the UTC offset that converts system time to local time."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "dns domain",
    "cmd": "dns domain string\nno dns domain\ndefault dns domain",
    "desc": "The dns domain command configures the switchs domain name."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "email",
    "cmd": "email",
    "desc": "The email command places the switch in email client configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "event-monitor backup max-size",
    "cmd": "event-monitor backup max-size file_quantity\nno event-monitor backup max-size\ndefault event-monitor backup max-size",
    "desc": "The event-monitor backup max-size command specifies the quantity of event monitor backup files the switch maintains."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "event-monitor backup path",
    "cmd": "event-monitor backup path URL_FILE\nno event-monitor backup path\ndefault event-monitor backup path",
    "desc": "The event-monitor backup path command enables the storage of the event monitor buffer to switch files and specifies the path/name of these files."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "event-monitor buffer max-size",
    "cmd": "event-monitor buffer max-size buffer_size\nno event-monitor buffer max-size\ndefault event-monitor buffer max-size",
    "desc": "The event-monitor buffer max-size command specifies the size of the event monitor buffer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "event-monitor clear",
    "cmd": "event-monitor clear",
    "desc": "The event-monitor clear command removes the contents of the event monitor buffer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "event-monitor sync",
    "cmd": "event-monitor sync",
    "desc": "The event-monitor buffer sync command combines the event monitor buffer and all backup logs and synchronizes them into a single SQLite file, which is stored at /var/log/eventMon."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "event-monitor",
    "cmd": "event-monitor LOG_TYPE\nno event-monitor LOG_TYPE\ndefault event-monitor LOG_TYPE",
    "desc": "The event-monitor command enables the event monitor and specifies the types of events that are logged."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "hostname",
    "cmd": "hostname string\nno hostname\ndefault hostname",
    "desc": "The hostname command assigns a text string as the switch's host name."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip domain lookup",
    "cmd": "ip domain lookup [VRF_INSTANCE] source-interface INTF_NAME\nno ip domain lookup [VRF_INSTANCE] source-interface\ndefault ip domain lookup [VRF_INSTANCE] source-interface",
    "desc": "The ip domain lookup command specifies the source interface for all DNS requests sent from the specified VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip domain-list",
    "cmd": "ip domain-list [IP_DOMAIN_NAME]\nno ip domain-list [IP_DOMAIN_NAME]\ndefault ip domain-list [IP_DOMAIN_NAME]",
    "desc": "The ip domain-list command specifies a domain name to add to the IP domain list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip host",
    "cmd": "ip host hostname hostadd_1 [hostadd_2] ...[hostadd_X]\nno ip host [hostname] [hostadd_1 [hostadd_2] [hostadd_X]\ndefault ip host [hostname] [hostadd_1 [hostadd_2] [hostadd_X]",
    "desc": "The ip host command associates a hostname to an IPv4 address."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip name-server",
    "cmd": "ip name-server vrf [vrf_instance] [server_ip_address] [priority priority\nno ip name-server vrf [vrf_instance] [server_ip_address] [priority priority\ndefault ip name-server vrf [vrf_instance] [server_ip_address] [priority priority",
    "desc": "The ip name-server command adds name server addresses to running_config."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ipv6 host",
    "cmd": "ipv6 host hostname hostadd1 [hostadd2] ...[hostaddX]\nno ipv6 host [hostname] [hostadd1 [hostadd2] [hostaddX]\ndefault ipv6 host [hostname] [hostadd1 [hostadd2] [hostaddX]",
    "desc": "The ipv6 host command associates a hostname to an IPv6 address."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging buffered",
    "cmd": "logging buffered [alerts | critical | debugging | emergencies | informational\nno ->\nlogging buffered [alerts | critical | debugging | emergencies | informational",
    "desc": "The logging buffered command in the Global Configuration Mode configures the system logging buffer on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging console",
    "cmd": "logging console [alerts | critical | debugging | emergencies | informational\nno | default logging console [alerts | critical | debugging | emergencies |\ninformational | notifications | warnings]",
    "desc": "The logging console command in Global Configuration Mode controls which system log events display directly on the switch physical console port or on an administrator's remote terminal session such as SSH or"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging event",
    "cmd": "logging event [congestion-drops interval seconds] [link-status global] [login\ndiscards [global | interval seconds]>",
    "desc": "The logging event command in the Global Configuration Mode configures specify logging events not included in system logging on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging facility",
    "cmd": "logging facility source_name facility_code",
    "desc": "The logging facility command in the Global Configuration Mode categorizes the source of a system log event using a facility code from 0 to 23."
  },
  {
    "os": "eos",
    "role": "firewall",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging format",
    "cmd": "logging format [hostname [fqdn |ipv4]] [prefix prefix [rfc5424] [sequencenumbers] [timestamp high-resolution [traditional timezone| year] ]",
    "desc": "The logging format command in the Global Configuration Mode to format log messages on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging group",
    "cmd": "logging group server group_name\nno logging group server\ndefault logging group server",
    "desc": "The logging group command creates a Logging Group name and enters the Logging Group Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging group host",
    "cmd": "logging [vrf vrf_name] [host host_name] port port\nno logging [vrf | host]\ndefault logging [vrf | host]",
    "desc": "The logging group host command configures a Logging Group host and enters the Logging Group Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging group probe",
    "cmd": "probe [interval seconds [threshold success count]\nno probe\ndefault probe",
    "desc": "The logging group probe command in the Logging Group Configuration Mode configures the number of ICMP probes sent to the syslog server to determine the server status."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging host",
    "cmd": "logging host syslog_name [add port_number protocol [tcp | tls | udp]] [protocol",
    "desc": "The logging host command in Global Configuration Mode configures remote syslog server IP addresses and parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging level",
    "cmd": "logging level facility [all | default] [alerts | critical | debugging |\nemergencies | informational | notifications | warnings | 0_7]",
    "desc": "The logging level command in the Global Configuration Mode configures the level of logging severity at the feature level to add to the syslog."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "logging local-interface",
    "cmd": "logging local-interface [Ethernet port_number | Loopback inf_number | Management\nport_number | Port Channel lag sub_inf | Tunnel inf_number | VLAN inf_number]",
    "desc": "The logging local-interface command in the Global Configuration Mode configures an IP address of an interface as a source IP of log messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging message",
    "cmd": "logging message facility_mnenonic severity [alerts | critical | debugging |\nemergencies | informational | notifications | warnings] 0_7",
    "desc": "The logging message command in the Global Configuration Mode configures the second half of the crucial identifier used within a system log message to categorize the source and event type."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging monitor",
    "cmd": "logging monitor [alerts | critical | debugging | emergencies | informational\ninformational | notifications | warnings] 0_7",
    "desc": "The logging monitor command in Global Configuration Mode controls the display of system log events on a switch, specifically for remote terminal sessions such as SSH or Telnet."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging persistent",
    "cmd": "logging persistent logging file size\nno logging persistent logging file size",
    "desc": "The logging persistent command logs the files stored on the flash disk."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging policy",
    "cmd": "logging policy match [invert-result] match-list list_name discard",
    "desc": "The logging policy command in the Global Configuration Mode creates a set of rules and guidelines that dictate what, when, where, and how the system log handles events."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging qos",
    "cmd": "logging qos dscp dscp_value",
    "desc": "The logging qos command in Global Configuration Mode describes how the Quality of Service (QoS) log events apply to the system log and manage the traffic policy and internal buffers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging relogging-interval",
    "cmd": "logging relogging-interval minutes",
    "desc": "The logging relogging-interval command in the Global Configuration Mode configures the interval between relogging critical log messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging repeat-messages",
    "cmd": "logging repeat-messages\nno logging repeat-messages\ndefault logging repeat-messages",
    "desc": "The logging repeat-messages command configures repetition of syslog messages instead of summarizing the count of repeats."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "logging source-interface",
    "cmd": "logging source-interface [Ethernet port_number | Loopback inf_number | Management\nport_number | Port Channel lag sub_inf | Tunnel inf_number | VLAN inf_number]",
    "desc": "The logging source-interface command in Global Configuration Mode configures an interface as the source IP of log messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging synchronous",
    "cmd": "logging synchronous level [alerts | critical | debugging | emergencies |\ninformational | notifications | warnings] 0_7",
    "desc": "The logging synchronous command in Global Configuration Mode ensures that system log messages do not disrupt or interfere with command line input."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging trap",
    "cmd": "logging trap\ninformational | notifications | warnings] 0_7",
    "desc": "The logging trap command in Global Configuration Mode controls the minimum severity level of system log events eligible to forward to a remote syslog server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging vrf host",
    "cmd": "logging vrf vrf_name host ip_address [add port_number protocol [tcp | tls | udp]]\nno logging vrf vrf_name\ndefault logging vrf vrf_name",
    "desc": "The logging vrf command in the Global Configuration Mode ensures that syslog messages use a specific, non-default Virtual Routing and Forwarding (VRF) instance when sent to a remote syslog servers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging vrf local-interface",
    "cmd": "logging vrf vrf_name local-interface [Ethernet port_number | Loopback inf_number",
    "desc": "The logging vrf local-interface command in the Global Configuration Mode associates a local interface with a VRF where the event originated."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "logging vrf source-interface",
    "cmd": "logging vrf vrf_name source-interface [Ethernet port_number | Loopback inf_number",
    "desc": "The logging vrf local-interface command in the Global Configuration Mode associates a source interface, usually a Loopback interface, with a VRF to provide a consistent and correctly isolated source IP"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "no event-monitor",
    "cmd": "no event-monitor [PARAMETER]\ndefault event-monitor [PARAMETER]",
    "desc": "The no event-monitor and default event-monitor commands remove the specified eventmonitor configuration statements from running-config, returning the switch to the specified default state."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ntp authenticate",
    "cmd": "ntp authenticate\nno ntp authenticate\ndefault ntp authenticate",
    "desc": "The ntp authenticate command enables the authentication of incoming NTP packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ntp authentication-key",
    "cmd": "ntp authentication-keykey_id ENCRYPT_TYPE password_text\nno ntp authentication-key key_id\ndefault ntp authentication-key key_id",
    "desc": "The ntp authentication-key command creates an authentication key for use in authenticating incoming NTP packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ntp local-interface",
    "cmd": "ntp local-interface [VRF_INSTANCE] INT_PORT\nno ntp local-interface\ndefault ntp local-interface",
    "desc": "The ntp local-interface command configures an interface as the local NTP source."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ntp serve all",
    "cmd": "ntp serve all\nno ntp serve all\ndefault ntp serve all",
    "desc": "The ntp serve all command configures the switch to act as an NTP server by accepting incoming NTP requests."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ntp serve",
    "cmd": "ntp serve\nno ntp serve\ndefault ntp serve",
    "desc": "The ntp serve command configures the command mode interface to accept incoming NTP requests regardless of the global setting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ntp server",
    "cmd": "ntp server [ vrfvrf_instance | host_name] refresh [version ntp_version] [source-address\nno ntp server [vrf_instance] host_name\ndefault ntp server [vrf_instance] host_name",
    "desc": "The ntp server command adds a Network Time Protocol (NTP) server to the running-config."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ntp trusted-key",
    "cmd": "ntp trusted-key key_list\nno ntp trusted-key\ndefault ntp trusted-key",
    "desc": "The ntp trusted-key command specifies which authentication keys will be trusted for authentication of NTP packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "power enable module",
    "cmd": "power enable module {fabric|linecard|supervisor|switchcard} module_number\nno power enable module {fabric|linecard|supervisor|switchcard} module_number\ndefault power enable module {fabric|linecard|supervisor|switchcard} module_number",
    "desc": "The power enable module command powers up the specified module."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "prompt",
    "cmd": "prompt p_string\nno prompt\ndefault prompt",
    "desc": "The prompt command specifies the contents of the CLI prompt."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show banner",
    "cmd": "show banner BANNER_TYPE [login | motd]",
    "desc": "The show banner command displays the specified banner."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "show clock",
    "cmd": "show clock",
    "desc": "The show clock command displays the current system clock time and configured time zone."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show event-monitor arp",
    "cmd": "show event-monitor arp [GROUP] [MESSAGES] [INTERFACE] [IP] [MAC] [TIME] [VRF]",
    "desc": "The show event-monitor arp command performs an SQL-style query on the event monitor database and displays ARP table events as specified by command parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show event-monitor igmpsnooping",
    "cmd": "show event-monitor igmpsnooping [GROUP] [MESSAGES] [MAC] [INTERFACE] [VLAN] [TIME]",
    "desc": "The show event-monitor igmpsnooping command performs an SQL-style query on the eventmonitor database, using the statement specified in the command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show event-monitor mac",
    "cmd": "show event-monitor mac [GROUP] [MESSAGES] [INTERFACE] [MAC] [TIME]",
    "desc": "The show event-monitor mac command performs an SQL-style query on the event monitor database and displays MAC address table events as specified by command parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show event-monitor mroute",
    "cmd": "show event-monitor mroute [GROUP] [MESSAGES] [IP] [INTERFACE] [SRC_IP] [TIME]",
    "desc": "The show event-monitor mroute command performs an SQL-style query on the event-monitor database, using the statement specified in the command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show event-monitor neighbor",
    "cmd": "show event-monitor neighbor [GROUP][MESSAGES][INTERFACE][IP6][MAC][TIME][VRF]",
    "desc": "The show event-monitor neighbor command performs an SQL-style query on the event monitor database and displays neighbor table events as specified by command parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show event-monitor nexthop-group backup-activation",
    "cmd": "show event-monitor nexthop-group backup-activation",
    "desc": "The show event-monitor nexthop-group backup-activation command displays Nexthop Group backup activation events produced by forwarding agents."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show event-monitor route6",
    "cmd": "show event-monitor route6 [GROUP][MESSAGES][IP6][TIME]",
    "desc": "The show event-monitor route6 command performs an SQL-style query on the event monitor database and displays routing6 table events as specified by command parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show event-monitor route",
    "cmd": "show event-monitor route [GROUP][MESSAGES][IP][TIME]",
    "desc": "The show event-monitor route command performs an SQL-style query on the event monitor database and displays routing table events as specified by command parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show event-monitor sqlite",
    "cmd": "show event-monitor sqlite statement",
    "desc": "The show event-monitor sqlite command performs an SQL-style query on the event monitor database, using the statement specified in the command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show event-monitor stpunstable",
    "cmd": "show event-monitor stpunstable [MESSAGES][TIME]",
    "desc": "The show event-monitor stpunstable command performs an SQL-style query on the event-monitor database, using the statement specified in the command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show hostname",
    "cmd": "show hostname",
    "desc": "The show hostname command displays the hostname and the Fully Qualified Domain Name (FQDN) of the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show hosts",
    "cmd": "show hosts",
    "desc": "The show hosts command displays the default domain name, name lookup service style, a list of name server hosts, and the static hostname-IP address maps."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip domain-name",
    "cmd": "show ip domain-name",
    "desc": "The show ip domain-name command displays the switchs IP domain name that is configured with the ip domain name command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip name-server",
    "cmd": "show ip name-server",
    "desc": "The show ip name-server command displays the ip addresses of name-servers in running-config."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "kindablue",
    "cmd": "kindablue",
    "desc": "1 switch>"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "show local-clock time-properties",
    "cmd": "show local-clock time-properties",
    "desc": "The show local-clock time-properties command displays the Precision Time Protocol (PTP) clock properties."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "show logging",
    "cmd": "show logging",
    "desc": "The show logging command displays information about the current system logging configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "show logging group",
    "cmd": "show logging group server group_name",
    "desc": "The show logging group command displays the status of the syslog servers, and indicates if the server acts as the primary or the standby server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "show ntp associations",
    "cmd": "show ntp associations\nhash of the IPv6 address.",
    "desc": "The show ntp associations command displays the status of connections to NTP servers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "l1 source",
    "cmd": "l1 source [interface | mac | none]",
    "desc": "The l1 source command configures the source for patching Layer 1 traffic between various front panel interfaces and Switch Application (SwitchApp) ports in the Ethernet Interface configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "show l1 destination",
    "cmd": "show l1 destination [interface]",
    "desc": "The show l1 destination command displays the list of all destinations for all interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show l1 matrix",
    "cmd": "show l1 matrix [all | interface | detail | physical]",
    "desc": "The show l1 matrix command displays the matrix representation of Layer 1 paths for available interfaces in the privileged EXEC mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show l1 path",
    "cmd": "show l1 path [interface]",
    "desc": "The show l1 path command displays the source and destination paths for all interfaces in the system."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show l1 source",
    "cmd": "show l1 source [interface | capabilities]",
    "desc": "The show l1 source command displays the list of all source interfaces to connect for specific interfaces such as Ethernet ports, switch, FPGA ports, or CPU ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show l1 source capabilities",
    "cmd": "show l1 source capabilities",
    "desc": "The show l1 source capabilities command displays the list of all interfaces available to connect in the crosspoint and the possible source ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "seconds",
    "cmd": "seconds",
    "desc": "300 seconds 30 seconds Ethernet2 4::1 Sync"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp announce interval",
    "cmd": "ptp announce interval log_interval\nno ptp announce interval\ndefault ptp announce interval",
    "desc": "The ptp announce interval command configures the interval at which the configuration mode interface sends PTP announce messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp announce timeout",
    "cmd": "ptp announce timeout multiplier\nno ptp announce timeout\ndefault ptp announce timeout",
    "desc": "The ptp announce timeout sets the timeout multiplier for the configuration-mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp delay-mechanism",
    "cmd": "ptp delay-mechanism mech_type\nno ptp delay-mechanism\ndefault ptp delay-mechanism",
    "desc": "The ptp delay-mechanism command configures the delay mechanism in boundary clock mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp delay-req interval",
    "cmd": "ptp delay-req interval log_interval\nno ptp delay-req interval\ndefault ptp delay-req interval",
    "desc": "The ptp delay-req interval command specifies the time in log seconds recommended to the slave devices to send delay request messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp domain",
    "cmd": "ptp domain domain_number\nno ptp domain\ndefault ptp domain",
    "desc": "The ptp domain command sets the domain number to use for the clock."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp enable",
    "cmd": "ptp enable\nno ptp enable\ndefault ptp enable",
    "desc": "The ptp enable command enables PTP on the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp forward-v1",
    "cmd": "ptp forward-v1\nno ptp forward-v1\ndefault ptp forward-v1",
    "desc": "The ptp forward-v1 command configures the switch to forward Precision Time Protocol version 1 packets as regular multicast traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp grandmasters",
    "cmd": "ptp grandmasters clock-identity accepted address_format\nno ptp grandmasters",
    "desc": "The ptp grandmasters command in the PTP Configuration Mode allows the configuration of a list of grandmaster clocks for PTP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp hold-ptp-time",
    "cmd": "ptp hold-ptp-time offset\nno ptp hold-ptp-time\ndefault ptp hold-ptp-time",
    "desc": "The ptp hold-ptp-time command configures the PTP offset hold time in seconds."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp local-priority",
    "cmd": "ptp local-priority PRIORITY_NUM",
    "desc": "The ptp local-priority command configures the local priority of the clock and interfaces to control the topology."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp mode",
    "cmd": "ptp mode mode_name\nno ptp mode\ndefault ptp mode",
    "desc": "The ptp mode command configures the Precision Time Protocol (PTP) packet forwarding mode for the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "ptp monitor threshold mean-path-delay",
    "cmd": "ptp monitor threshold mean-path-delay threshold\nno ptp monitor threshold mean-path-delay\ndefault ptp monitor threshold mean-path-delay",
    "desc": "Mean path delay is the mean time in nanoseconds that PTP packets take to travel between PTP master and slave."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "ptp monitor threshold offset-from-master",
    "cmd": "ptp monitor threshold offset-from-master threshold\nno ptp monitor threshold offset-from-master\ndefault ptp monitor threshold offset-from-master",
    "desc": "PTP offset is the difference in nanoseconds between master and slave time."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "ptp monitor threshold skew",
    "cmd": "ptp monitor threshold skew threshold\nno ptp monitor threshold skew\ndefault ptp monitor threshold skew",
    "desc": "PTP skew is the clock frequency difference between master and slave."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "ptp monitor",
    "cmd": "ptp monitor\nno ptp monitor",
    "desc": "The ptp monitor command enables and disables PTP monitoring on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp pdelay-neighbor-threshold",
    "cmd": "ptp pdelay-neighbor-threshold link_prop\nno ptp pdelay-neighbor-threshold\ndefault ptp pdelay-neighbor-threshold",
    "desc": "The ptp pdelay-neighbor-threshold command configures the propagation delay threshold above which the switch will consider the neighbor connected to this port to be incapable of participating in generalized Precision Time Protocol (gPTP)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp pdelay-req interval",
    "cmd": "ptp pdelay-req interval log_interval\nno ptp pdelay-req interval\ndefault ptp pdelay-req interval",
    "desc": "The ptp pdelay-req interval command configures the interval between Precision Time Protocol peer delay-request messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp priority1",
    "cmd": "ptp priority1 priority_rate\nno ptp priority1\ndefault ptp priority1",
    "desc": "The ptp priority1 command configures the priority 1 value for advertising the switchs PTP clock."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp priority2",
    "cmd": "ptp priority2 priority_rate\nno ptp priority2\ndefault ptp priority2",
    "desc": "The ptp priority2 command sets the priority 2 value for the clock."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "ptp role",
    "cmd": "ptp role [dynamic | master]\nno ptp role\ndefault ptp role",
    "desc": "The ptp role command configures a port to operate either in the master mode or the dynamic mode when it is executed in the interface configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp source",
    "cmd": "ptp source ip {ip|ipv6} ip_addr\nno ptp source ip\ndefault ptp source ip",
    "desc": "The ptp source command configures the source IP address for all PTP packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp sync timeout",
    "cmd": "ptp sync timeout interval_multiplier\nno ptp sync timeout\ndefault ptp sync timeout",
    "desc": "A PTP synchronization timeout occurs if a sync message is not received for a specified period of time, calculated as a multiple of the PTP sync-message interval."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp sync-message interval",
    "cmd": "ptp sync-message interval log_interval\nno ptp sync-message interval\ndefault ptp sync-message interval",
    "desc": "The ptp sync-message interval command configures the time for sending synchronization messages by specifying its log2 value."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp transport",
    "cmd": "ptp transport transport_type\nno ptp transport\ndefault ptp transport",
    "desc": "The ptp transport command configures the PTP transport type for a specific interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp ttl",
    "cmd": "ptp ttl hop_count\nno ptp ttl\ndefault ptp ttl",
    "desc": "The ptp ttl command configures the Time To Live (TTL) value of the PTP packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "ptp unicast-negotiation",
    "cmd": "ptp unicast-negotiation\nptp unicast-negotiation remote-grantee",
    "desc": "The ptp unicast-negotiation command configures the master slave profiles for PTP devices."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "show ptp",
    "cmd": "show ptp",
    "desc": "The show ptp command displays summary Precision Time Protocol (PTP) information and PTP status of switch ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "show ptp foreign-master-record",
    "cmd": "show ptp foreign-master-record",
    "desc": "The show ptp foreign-master-record command displays information about foreign masters (PTP sources not designated as the switch's master from which the switch has received sync packets)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "show ptp interface counters",
    "cmd": "show ptp [interface_name] counters",
    "desc": "The show ptp interface counters command displays PTP interface counters for all interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "show ptp interface",
    "cmd": "show ptp [interface_name][status_filter]",
    "desc": "The show ptp interface command displays PTP information for all the interfaces on the device."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "show ptp local-clock",
    "cmd": "show ptp local-clock",
    "desc": "The show ptp local-clock command displays the Precision Time Protocol (PTP) clock information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "show ptp masters",
    "cmd": "show ptp masters",
    "desc": "The show ptp masters command displays information about the switch's PTP master and grand master clocks."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show ptp monitor",
    "cmd": "show ptp monitor",
    "desc": "The show ptp monitor command to displays the list of up to 100 recorded entries of offset from master, mean path delay and skew values, along with current PTP mode, whether or not the feature is enabled,"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "show ptp source ip",
    "cmd": "show ptp source ip",
    "desc": "The show ptp source ip command displays the PTP source IP for the device."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "show ptp unicast-negotiation",
    "cmd": "show ptp unicast-negotiation profile\nshow ptp unicast-negotiation [DETAILS]",
    "desc": "The show ptp unicast-negotiation command displays PTP unicast negotiation information for the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Environment Control Introduction",
    "cmd": "Environment Control Introduction",
    "desc": "Arista switching platforms are designed to work reliably in common data center environments."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Environment Control Overview",
    "cmd": "Environment Control Overview",
    "desc": "This section contains the following topics: • Temperature • Fans • Power"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Power",
    "cmd": "Power",
    "desc": "Arista switches contain power supplies that provide power to internal components."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Power Status",
    "cmd": "show environment power",
    "desc": "The show environment power command displays the status of the power supplies."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "System Status",
    "cmd": "show system environment all",
    "desc": "The show system environment all command lists the temperature, cooling, fan, and power supply information the individual show environment commands display, as described in Temperature Status, Fans, and Power."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Environment Commands",
    "cmd": "Environment Commands",
    "desc": "Environment Control Configuration Commands • environment fan-speed • environment insufficient-fans action • environment overheat action • locator-led Environment Display Commands • show environment power"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "environment fan-speed",
    "cmd": "environment fan-speed ACTION\nno environment fan-speed\ndefault environment fan-speed",
    "desc": "The environment fan-speed command determines how to control the speed of the switch fans."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "environment insufficient-fans action",
    "cmd": "environment insufficient-fans action REMEDY\nno environment insufficient-fans action\ndefault environment insufficient-fans action",
    "desc": "The environment insufficient-fans command controls the switch response to the insufficient fan condition."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "environment overheat action",
    "cmd": "environment overheat action REMEDY\nno environment overheat action\ndefault environment overheat action",
    "desc": "The environment overheat command controls the switch's response to an overheat condition."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "locator-led",
    "cmd": "locator-led {fantray tray_num | interface interface | module module_num | powersupply supply_num}\nno locator-led {fantray tray_num | interface interface | module module_num | powersupply supply_num}",
    "desc": "When a component requires service, the locator-led command activates a locator to assist a technician in finding the component."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show environment power",
    "cmd": "show environment power [INFO_LEVEL]",
    "desc": "The show environment power command displays the status of all power supplies in the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show environment temperature",
    "cmd": "show environment temperature [MODULE_NAME] [INFO_LEVEL]",
    "desc": "The show environment temperature command displays the operating temperature of all sensors on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show locator-led",
    "cmd": "show locator-led",
    "desc": "The show locator-led command displays the status of locator LEDs enabled on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show system environment cooling",
    "cmd": "show system environment cooling [INFO_LEVEL]",
    "desc": "The show system environment cooling command displays fan status, air flow direction, and ambient temperature on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show system environment power budget",
    "cmd": "show system environment power budget",
    "desc": "The show system environment power budget command displays the configured power budget for PoE switches and a table to show the current consumption."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Reload",
    "cmd": "Reload",
    "desc": "After updating the boot-config file, reset the switch to activate the new image."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Install the New EOS Image",
    "cmd": "Install the New EOS Image",
    "desc": "After the EOS image has been copied to the primary supervisor's flash drive, use the install command to update the boot-config, copy the new image to the secondary supervisor, and reload both supervisors."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "install",
    "cmd": "install source source_path [destination destination_path][now][reload]",
    "desc": "The install command copies the specified EOS image onto the switch if the source is external, configures the boot-config file to point to the specified EOS image, copies the image to the standby supervisor on dualsupervisor switches, and optionally reloads the switch to run the n"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "reload fast-boot",
    "cmd": "reload fast-boot\nalso recommends that an additional 240MB be available to store diagnostic information.",
    "desc": "Smart System Upgrade (SSU) allows critical switches to be upgraded with minimal downtime and packet loss by optimizing the reload procedure and leveraging protocols capable of graceful restart."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "reload hitless",
    "cmd": "reload hitless",
    "desc": "The reload hitless command is a legacy command now identical to the reload fast-boot command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "AAA Configuration",
    "cmd": "AAA Configuration",
    "desc": "This section describes Authentication, Authorization, and Accounting (AAA), and contains these topics: • Authentication, Authorization, and Accounting Overview • Configuring the Security Services • Server Groups"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "RADIUS",
    "cmd": "radius-server host RAD-1 key rp31E2v",
    "desc": "Remote Authentication Dial-In User Service (RADIUS) consists of a networking protocol that provides centralized AAA services for computers connecting to a network and then using network resources."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "AAA with LDAP",
    "cmd": "AAA with LDAP",
    "desc": "The switches support AAA with the LDAP protocol for authentication and authorization."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "Default Roles",
    "cmd": "aaa authorization policy local default-role sysuser",
    "desc": "Users that are not explicitly assigned a role are assigned the default role."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "Radius Servers",
    "cmd": "aaa authentication login default group radius",
    "desc": "A role can be assigned to a remote user authenticated through a RADIUS server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "AAA and X.509 Authentication",
    "cmd": "AAA and X.509 Authentication",
    "desc": "Configure AAA to support X."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "AAA Time-based Lockout",
    "cmd": "AAA Time-based Lockout",
    "desc": "AAA time-based lockout enables managing remote user unsuccessful login attempts for a specified period."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "AAA Accounting for OpenConfig Remote Procedure Call (RPC) Messages Overview",
    "cmd": "AAA Accounting for OpenConfig Remote Procedure Call (RPC) Messages Overview",
    "desc": "OpenConfig allows network engineers to collaboratively develop programming interfaces and tools to manage networks dynamically and in a vendor-neutral manner."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "AAA Commands",
    "cmd": "AAA Commands",
    "desc": "Local Security File Commands • aaa root • enable password • show privilege • show users • show users accounts • username • username ssh-key Accounting, Authentication, and Authorization Commands • aaa accounting"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa accounting dot1x",
    "cmd": "aaa accounting dot1x default [METHOD_1][METHOD_2][METHOD_N]\nno aaa accounting dot1x default\ndefault aaa accounting dot1x default",
    "desc": "The aaa accounting dot1x command enables the accounting of requested 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa accounting system",
    "cmd": "aaa accounting system default [METHOD_1][METHOD_2] ... [METHOD_N]\nno aaa accounting system default\ndefault aaa accounting system default",
    "desc": "The aaa accounting system command performs accounting for all system-level events."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa accounting",
    "cmd": "aaa accounting TYPE CONNECTION MODE [METHOD_1][METHOD_2] ... [METHOD_N]\nno aaa accounting TYPE CONNECTION\ndefault aaa accounting TYPE CONNECTION",
    "desc": "The aaa accounting command configures accounting method lists for a specified authorization type."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa authentication dot1x",
    "cmd": "aaa authentication dot1x default group {group_name | radius}\nno aaa authentication dot1x default\ndefault aaa authentication dot1x",
    "desc": "The aaa authentication dot1x command configures the default authentication list of requested 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa authentication enable",
    "cmd": "aaa authentication enable [console | default] METHOD_1 [METHOD_2] ... [METHOD_N]\nno aaa authentication enable [console | default]\ndefault aaa authentication enable [console | default]",
    "desc": "The aaa authentication enable command configures the service list that the switch references to authorize access to Privileged EXEC command mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa authentication login",
    "cmd": "aaa authentication login CONNECTION SERVICE_1 [SERVICE_2] ... [SERVICE_N]\nno aaa authentication login CONNECTION\ndefault aaa authentication login CONNECTION",
    "desc": "The aaa authentication login command configures service lists the switch references to authenticate usernames."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa authentication policy local allow-nopassword-remote-login",
    "cmd": "aaa authentication policy local allow-nopassword-remote-login\nno aaa authentication policy local allow-nopassword-remote-login\ndefault aaa authentication policy local allow-nopassword-remote-login",
    "desc": "The aaa authentication policy local allow-nopassword-remote-login command permits usernames without passwords to log in from any port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa authentication policy lockout failure",
    "cmd": "aaa authentication policy lockout failure failure_count duration duration_time {window\nno aaa authentication policy lockout failure\ndefault aaa authentication policy lockout failure",
    "desc": "The aaa authentication policy lockout failure command configures the switch to block the remote user from access after a specified number of unsuccessful login attempts within a lockout period."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa authentication policy log",
    "cmd": "aaa authentication policy {on-failure | on-success} log\nno aaa authentication policy {on-failure | on-success} log\ndefault aaa authentication policy {on-failure | on-success} log",
    "desc": "The aaa authentication policy log command configures the switch to generate syslog messages for login authentication success or failure events."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa authorization commands",
    "cmd": "aaa authorization commands PRIV default SERVICE_1[SERVICE_2] ... [SERVICE_N]\nno aaa authorization commands PRIV default\ndefault aaa authorization commands PRIV default",
    "desc": "The aaa authorization commands command configures the service list that authorizes CLI command access."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa authorization config-commands",
    "cmd": "aaa authorization config-commands\nno aaa authorization config-commands\ndefault aaa authorization config-commands",
    "desc": "The aaa authorization config-commands command enables authorization of commands in any configuration mode, such as Global Configuration and all interface configuration modes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa authorization exec",
    "cmd": "aaa authorization exec default METHOD_1 [METHOD_2] ... [METHOD_N]\nno aaa authorization exec default\ndefault aaa authorization exec default",
    "desc": "The aaa authorization exec command configures the service list that the switch references to authorize access to open an EOS CLI shell."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa authorization policy local default-role",
    "cmd": "aaa authorization policy local default-role role_name\nno aaa authorization policy local default-role\ndefault aaa authorization policy local default-role",
    "desc": "The aaa authorization policy local command specifies the name of the default role."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa authorization serial-console",
    "cmd": "aaa authorization serial-console\nno aaa authorization serial-console\ndefault aaa authorization serial-console",
    "desc": "The aaa authorization serial-console command configures the switch to authorize commands entered through the console."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa group server radius",
    "cmd": "aaa group server radius group_name\nno aaa group server radius group_name\ndefault aaa group server radius group_name",
    "desc": "The aaa group server radius command enters the Server-group-RADIUS Configuration Mode for the specified group name."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa group server tacacs+",
    "cmd": "aaa group server tacacs+ group_name\nno aaa group server tacacs+ group_name\ndefault aaa group server tacacs+ group_name",
    "desc": "The aaa group server tacacs+ command enters Server-group-TACACS+ Configuration Mode for the specified group name."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "aaa root",
    "cmd": "aaa root SECURITY_LEVEL [ENCRYPT_TYPE] [password]\nno aaa root\ndefault aaa root",
    "desc": "The aaa root command specifies the password security level for the root account and can assign a password to the account."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "auto-certificate protocol connection",
    "cmd": "auto-certificate protocol est profile_name connection retry [count retries |\ninterval seconds",
    "desc": "The auto-certificate protocol connection command configures parameters for Enrollment over Secure Transport (EST) profiles used for Automatic Certificate Management."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "auto-certificate protocol credentials",
    "cmd": "auto-certificate protocol est profile_name credentials [enroll | re-enroll]",
    "desc": "The auto-certificate protocol credentials command configures the enrollment and reenrollment usernames and pairs or JSON Web Tokens (JWTs)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "auto-certificate protocol disabled",
    "cmd": "auto-certificate protocol est profile_name disabled",
    "desc": "The auto-certificate protocol disabled command temporarily pauses retrieving certificates from the server by disabling the profile and prevents sending unnecessary requests to the server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "auto-certificate protocol server",
    "cmd": "auto-certificate protocol est profile_name server [ssl ssl_profile] [url server_url]",
    "desc": "The auto-certificate protocol server command configures EST server behavior and options such as SSL profiles, server URLs, and VRFs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "auto-certificate profile",
    "cmd": "auto-certificate profile profile_name [digest [sha256 | sha384 | sha512]]",
    "desc": "The auto-certificate profile command allows configuration of Automatic Certificate Management and profiles for X."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "auto-certificate profile parameters",
    "cmd": "auto-certificate profile profile_name parameters [distinguished-name [commonname common_name] [country country_code] [email email_address ] [locality\nauto-certificate profile profile_name parameters [subject-alternative-name [dns",
    "desc": "The auto-certificate profile parameters command configures the certificate attributes including distinguished name and subject alternative name."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "clear aaa authentication lockout",
    "cmd": "clear aaa authentication lockout [user user_name]",
    "desc": "The clear aaa authentication lockout command clears the locked status of a user and allows access within a lockout period."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "clear aaa counters radius",
    "cmd": "clear aaa counters radius",
    "desc": "The clear aaa counters radius command resets the counters tracking the statistics for the RADIUS servers that the switch accesses."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "clear aaa counters tacacs+",
    "cmd": "clear aaa counters tacacs+",
    "desc": "The clear aaa counters tacacs+ command resets the counters tracking the statistics for the TACACS+ servers that the switch accesses."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "clear aaa counters",
    "cmd": "clear aaa counters [SERVICE_TYPE]",
    "desc": "The clear aaa counters command resets the counters tracking the number of service transactions performed by the switch since the last reset of the counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "clear radius proxy counters client group",
    "cmd": "clear radius proxy client group group_name",
    "desc": "The clear radius proxy client group command clears RADIUS proxy client packet counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "deny (Role)",
    "cmd": "no deny [MODE_NAME] command command_name\ndefault deny [MODE_NAME] command command_name",
    "desc": "The deny command adds a deny rule to the configuration mode role."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "enable password",
    "cmd": "enable password [ENCRYPT_TYPE] password\nno enable password\ndefault enable password",
    "desc": "The enable password command creates a new enable password or changes an existing password."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "ip radius source-interface",
    "cmd": "ip radius [vrf_inst] source-interface slot_number\nno ip radius [vrf_inst] source-interface\ndefault ip radius [vrf_inst] source-interface",
    "desc": "The ip radius source-interface command specifies the interface from which the IPv4 or IPv6 address is derived for use as the source for outbound RADIUS packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "ip tacacs source-interface",
    "cmd": "ip tacacs [VRF_INST] source-interface INT_NAME\nno ip tacacs [VRF_INST] source-interface\ndefault ip tacacs [VRF_INST] source-interface",
    "desc": "The ip tacacs source-interface command specifies the interface from which the IPv4 or IPv6 address is derived for use as the source for outbound TACACS+ packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "no <sequence number> (Role)",
    "cmd": "no sequence_num\ndefault sequence_num",
    "desc": "The no <sequence number> command removes the rule with the specified sequence number from the configuration-mode role."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "monitor server radius",
    "cmd": "monitor server radius\nno monitor server radius",
    "desc": "The monitor server radius command enters the Monitor Server RADIUS Configuration Mode and allows the configuration of RADIUS server monitoring on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "probe interval",
    "cmd": "probe interval period seconds\nno probe interval",
    "desc": "The probe interval command in the Monitor Server RADIUS Configuration Mode configures EOS to send probes to the RADIUS server at specific time intervals to ensure the availability of the server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "probe method",
    "cmd": "probe method [[access-request username username password password ] | [statusserver]]\nno probe method",
    "desc": "The probe method command in the Monitor Server RADIUS Configuration Mode determines the type of probe sent to the RADIUS server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "probe threshold",
    "cmd": "probe threshold failure number\nno probe threshold failure",
    "desc": "The probe threshold command in the Monitor Server RADIUS Configuration Mode configures sets the number of consecutive failed probes before determining a RADIUS server has become nonresponsive."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "radius proxy",
    "cmd": "radius proxy",
    "desc": "The radius proxy command enters the RADIUS Proxy Configuration Mode on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "radius proxy client group client",
    "cmd": "radius proxy client group group_name client [host host_name] | [ipv4 ipv4_addr] | [ipv6\nipv6_addr]",
    "desc": "The radius proxy client group client command configures RADIUS Proxy client groups on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "radius proxy client group server",
    "cmd": "radius proxy client group group_name server group_name",
    "desc": "The radius proxy client group server command configures RADIUS Proxy server groups on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "radius proxy client key",
    "cmd": "radius proxy client key [0 | 7 | 8a] line",
    "desc": "The radius proxy client key command enters the RADIUS Proxy Configuration Mode on a switch and allows the configuration of a global client key."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "radius proxy client session",
    "cmd": "radius proxy client session idle-timeout seconds",
    "desc": "The radius proxy client session command enters the RADIUS proxy configuration mode on a switch and allows the configuration of a client session idle-timeout parameter."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "radius proxy dynamic-authorization",
    "cmd": "radius proxy dynamic-authorization",
    "desc": "The radius proxy client key command enters the RADIUS proxy configuration mode on a switch and enables dynamic authorization for RADIUS proxy server groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "radius-server deadtime",
    "cmd": "radius-server deadtime dead_interval\nno radius-server deadtime\ndefault radius-server deadtime",
    "desc": "The radius-server deadtime command defines global deadtime period, when the switch ignores a non-responsive RADIUS server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "radius-server host",
    "cmd": "radius-server host ADDR [VRF_INST][AUTH][ACCT][TIMEOUT][DEAD][RETRAN][ENCRYPT]\nno radius-server host [ADDR][VRF_INST][AUTH][ACCT]\ndefault radius-server host [ADDR][VRF_INST][AUTH][ACCT]",
    "desc": "The radius-server host command sets parameters for communicating with a specific RADIUS server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "radius-server key",
    "cmd": "radius-server key [ENCRYPT_TYPE] encrypt_key\nno radius-server key\ndefault radius-server key",
    "desc": "The radius-server key command defines the global encryption key the switch uses when communicating with any RADIUS server for which a key is not defined."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "radius-server retransmit",
    "cmd": "radius-server retransmit count\nno radius-server retransmit\ndefault radius-server retransmit",
    "desc": "The radius-server retransmit command defines the global retransmit count, which specifies the number of times the switch attempts to access the RADIUS server after the first timeout expiry."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "radius-server timeout",
    "cmd": "radius-server timeout time_period\nno radius-server timeout\ndefault radius-server timeout",
    "desc": "The radius-server timeout command defines the global timeout the switch uses when communicating with any RADIUS server for which a timeout is not defined."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "resequence (Role)",
    "cmd": "resequence start_num inc_num",
    "desc": "The resequence command assigns sequence numbers to rules in the configuration mode role."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "permit (Role)",
    "cmd": "no permit [MODE_NAME] command ] command_name\ndefault permit [MODE_NAME] command command_name",
    "desc": "The permit command adds a permit rule to the configuration mode role."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "role",
    "cmd": "role role_name\nno role role_name\ndefault role role_name",
    "desc": "The role command places the switch in Role Configuration Mode, which is a group-change mode that modifies a role."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "server (server-group-RADIUS configuration mode)",
    "cmd": "server LOCATION [VRF_INST][AUTH][ACCT]\nno server LOCATION [VRF_INST][AUTH][ACCT]\ndefault server LOCATION [VRF_INST][AUTH][ACCT]",
    "desc": "The server (server-group-RADIUS configuration mode) command adds the specified RADIUS server to the configuration-mode group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "server (server-group-TACACS+ configuration mode)",
    "cmd": "server LOCATION [VRF_INST][PORT]\nno server LOCATION [VRF_INST][PORT]\ndefault server LOCATION [VRF_INST][PORT]",
    "desc": "The server (server-group-TACACS+ configuration mode) command adds the specified TACACS+ server to the configuration-mode group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "service dot1x",
    "cmd": "service dot1x\nno service dot1x",
    "desc": "The service dot1x command in the Monitor Server RADIUS Configuration Mode applies monitoring globally to the RADIUS servers used for 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show aaa",
    "cmd": "show aaa",
    "desc": "The show aaa command displays the user database."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show aaa authentication lockout",
    "cmd": "show aaa authentication lockout",
    "desc": "The show aaa authentication lockout command displays the status of locked-out users who could not log within the specified time and number of login attempts."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show aaa counters",
    "cmd": "show aaa counters",
    "desc": "The show aaa counters command displays the number of service transactions performed by the switch since the last time the counters were reset."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show aaa methods",
    "cmd": "show aaa methods [SERVICE_TYPE [accounting | authentication | authorization | all]]",
    "desc": "The show aaa methods command displays all the named method lists defined in the specified Authentication, Authorization, and Accounting (AAA) service."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show management ldap",
    "cmd": "show management ldap",
    "desc": "The show management ldap command displays information about the LDAP configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "fd7a:629f:52a4:dc25:b08d:feff:feed:2ce7",
    "cmd": "fd7a:629f:52a4:dc25:b08d:feff:feed:2ce7",
    "desc": "3FFF:FFFF::1\""
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show management security auto-certificate profile",
    "cmd": "show management security auto-certificate profile profile_name detail",
    "desc": "The show management security auto-certificate profile displays information about autocertificate profiles configured on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show management security auto-certificate protocol est",
    "cmd": "show management security auto-certificate protocol est [profile_name] [detail]",
    "desc": "The show management security auto-certificate protocol est command displays information about all Enrollment over Secure Transport (EST) protocol profiles configured on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show monitor server radius",
    "cmd": "show monitor server radius [detail]",
    "desc": "The show monitor server radius command in EXEC mode displays information about RADIUS server monitoring on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show privilege",
    "cmd": "show privilege",
    "desc": "The show privilege command displays the current privilege level for the CLI session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show radius",
    "cmd": "show radius",
    "desc": "The show radius command displays statistics for the RADIUS servers that the switch accesses."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show radius proxy client group",
    "cmd": "show radius proxy client group group_name",
    "desc": "The show radius proxy client group command displays information about RADIUS proxy configurations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show radius proxy server group",
    "cmd": "show radius proxy server group group_name",
    "desc": "The show radius proxy server group command displays information about RADIUS proxy server group configurations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show tacacs",
    "cmd": "show tacacs",
    "desc": "The show tacacs command displays statistics for the TACACS+ servers that the switch accesses."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show users accounts",
    "cmd": "show users accounts",
    "desc": "The show users accounts command displays the names, roles, and privilege levels of users that are listed in running-config."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show users detail",
    "cmd": "show users detail",
    "desc": "The show users detail command displays information about active AAA login sessions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show users roles",
    "cmd": "show users roles [ROLE_LIST]",
    "desc": "The show users roles command displays the name of the default role and the contents of the specified roles."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show users",
    "cmd": "show users",
    "desc": "The show users command displays the usernames that are currently logged into the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "tacacs-server host",
    "cmd": "tacacs-server host SERVER_ADDR [MULTIPLEX][VRF_INST][PORT][TIMEOUT][ENCRYPT]\nno tacacs-server host [SERVER_ADDR][MULTIPLEX][VRF_INST][PORT]\ndefault tacacs-server host [SERVER_ADDR][MULTIPLEX][VRF_INST][PORT]",
    "desc": "The tacacs-server host command sets communication parameters for communicating with a specific TACACS+ server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "tacacs-server key",
    "cmd": "tacacs-server key [ENCRYPT_TYPE] encrypt_key\nno tacacs-server key\ndefault tacacs-server key",
    "desc": "The tacacs-server key command defines the global encryption key the switch uses when communicating with any TACACS+ server for which a key is not defined."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "tacacs-server policy",
    "cmd": "tacacs-server policy unknown-mandatory-attribute ignore\nno tacacs-server policy unknown-mandatory-attribute ignore\ndefault tacacs-server policy unknown-mandatory-attribute ignore",
    "desc": "The tacacs-server policy command programs the switch to permit access to TACACS+ servers that send mandatory attribute-value (AV) pairs that the switch does not recognize."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "tacacs-server timeout",
    "cmd": "tacacs-server timeout time_period\nno tacacs-server timeout\ndefault tacacs-server timeout",
    "desc": "The tacacs-server timeout command defines the global timeout the switch uses when communicating with any TACACS+ server for which a timeout is not defined."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "username ssh-key",
    "cmd": "username name sshkey KEY\nno username name sshkey [role]\ndefault username name sshkey [role]",
    "desc": "The username ssh-key command configures an SSH key for the specified username."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "username",
    "cmd": "username name [PRIVILEGE_LEVEL] SECURITY [ROLE_USER]\nno username name [role]\ndefault username name [role]",
    "desc": "The username command adds a username to the local file and optionally assigns a password to the username."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "Transport Layer Security",
    "cmd": "Transport Layer Security",
    "desc": "Transport Layer Security (TLS), the successor to Secure Sockets Layer (SSL), is a security protocol used to communicate between client and server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "copy file: certificate:",
    "cmd": "copy file: file_name certificate:",
    "desc": "The copy file: certificate: command copies the certificate to the certificate: file system."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "copy file: sslkey:",
    "cmd": "copy file: file_name sslkey:",
    "desc": "The copy file: sslkey: command copies the SSL key to the sslkey: file system."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "delete certificate:",
    "cmd": "delete certificate: certificate_name",
    "desc": "The delete certificate: command deletes a specified certificate from the certificate: file system on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "delete sslkey:",
    "cmd": "delete sslkey: key_name",
    "desc": "The delete sslkey: command deletes a SSL key from the sslkey: file system on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dir certificate:",
    "cmd": "dir certificate:",
    "desc": "The dir certificate: command displays the directory output of the certificate: file system on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dir sslkey:",
    "cmd": "dir sslkey:",
    "desc": "The dir sslkey: command displays the directory output of sslkey: file system on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "reset ssl diffie-hellman parameters",
    "cmd": "reset ssl diffie-hellman parameters",
    "desc": "The reset ssl diffie-hellman parameters command resets the Diffie-Hellman parameters file after a system reboot."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "security pki certificate generate",
    "cmd": "security pki certificate generate {self-signed |signing-request} certificate_name Key key_name",
    "desc": "The security pki certificate generate command generates a self-signed certificate or a Certificate Signing Request (CSR) certificate."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "security pki key generate",
    "cmd": "security pki key generate [rsa [2048 | 3072 | 4096] key_name",
    "desc": "The security pki key generate command generates a RSA key used to validate a specific certificate."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show management security ssl certificate",
    "cmd": "show management security ssl certificate [certificate_name]",
    "desc": "The show management security ssl certificate command displays information about the certificate."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show management security ssl crl",
    "cmd": "show management security ssl crl",
    "desc": "The show management security ssl crl command displays the basic information about the installed Certificate Revocation List (CRLs)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show management security ssl diffie-hellman",
    "cmd": "show management security ssl diffie-hellman",
    "desc": "The show management security ssl diffie-hellman command displays the Diffie-Hellman parameter information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show management security ssl key",
    "cmd": "show management security ssl key [key_name]",
    "desc": "The show management security ssl key command displays the RSA key information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show management security ssl profile",
    "cmd": "show management security ssl profile [profile_name]",
    "desc": "The show management security ssl profile command displays the SSL profile status information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "ssl profile",
    "cmd": "ssl profile profile_name",
    "desc": "The ssl profile command places the switch in the SSL profile configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "Authentication Process",
    "cmd": "Authentication Process",
    "desc": "The authentication that occurs between a supplicant, authenticator, and authentication server include the following processes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "Dot1x Dropped Counters",
    "cmd": "Dot1x Dropped Counters",
    "desc": "The Dot1x Dropped Counters count the packets dropped by dot1x interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "Dot1x Web Authentication FQDN Allowlist",
    "cmd": "Dot1x Web Authentication FQDN Allowlist",
    "desc": "When using dot1x captive portal authentication, supplicants receive the WEB-AUTH-START page to begin redirecting the HTTPS requests to a captive portal as a second step in the authentication process."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "web4.it.mycompany.com",
    "cmd": "web4.it.mycompany.com",
    "desc": "2033-05-17 20:33:23 web5."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "www1.eng.mycompany.com",
    "cmd": "www1.eng.mycompany.com",
    "desc": "2033-05-17 20:33:21"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "www1.eng.mycompany.com 2033-05-17 20:33:21",
    "cmd": "www1.eng.mycompany.com 2033-05-17 20:33:21",
    "desc": "(pending)"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "statistics packets dropped",
    "cmd": "statistics packets dropped\nno statistics packets dropped",
    "desc": "The statistics packets droppedcommand to configure the dot1x dropped counters on the switch in the dot1x configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "aaa unresponsive action traffic allow vlan",
    "cmd": "aaa unresponsive action traffic allow vlan VLAN-ID\nno unresponsive action traffic allow vlan",
    "desc": "The aaa unresponsive action traffic allow vlan enables the the dot1x AAA unresponsive VLAN feature on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "captive portal",
    "cmd": "captive portal url URL ssl profile profile access-list ipv4 ACL name bypass\nfqdn_wildcard request timeout seconds\nno captive portal url URL ssl profile profile access-list ipv4 ACL name bypass\nfqdn_wildcardrequest timeout seconds",
    "desc": "The captive portal command enables the 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "clear dot1x statistics",
    "cmd": "clear dot1x statistics INTERFACE_NAME",
    "desc": "The clear dot1x statistics command resets the 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "dot1x eapol",
    "cmd": "dot1x eapol unresponsive action traffic allow [vlan vlan_id]",
    "desc": "The dot1x eapol command places the switch into 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "dot1x mac based authentication",
    "cmd": "dot1x mac based authentication\nno dot1x mac based authentication\ndefault dot1x mac based authentication",
    "desc": "The dot1x mac based authentication command enables MAC-based authentication on the existing 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "dot1x mac based authentication delay",
    "cmd": "dot1x mac based authentication delay delay-time seconds\nno dot1x mac based authentication delay\ndefault dot1x mac based authentication delay",
    "desc": "The dot1x mac based authentication delay command enables MAC-based authentication delay."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "dot1x mac based authentication hold period",
    "cmd": "dot1x mac based authentication hold period hold period-time seconds\nno dot1x mac based authentication hold period\ndefault dot1x mac based authentication hold period",
    "desc": "The dot1x mac based authentication hold period command enables MAC-based authentication hold period."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "dot1x mac based authentication request-identity",
    "cmd": "dot1x mac based authentication request-identity common\nno dot1x mac based authentication request-identity common\ndefault dot1x mac based authentication request-identity common",
    "desc": "The dot1x mac based authentication request-identity command in the Global Configuration Mode sends identity requests at 60 second intervals until successfully authenticating the EAPOL supplicant."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dot1x pae authenticator",
    "cmd": "dot1x pae authenticator\nno dot1x pae authenticator\ndefault dot1x pae authenticator",
    "desc": "The dot1x pae authenticator command sets the port access entity (PAE) type of the configuration mode interface to authenticator, which enables IEEE 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "dot1x reauthentication",
    "cmd": "dot1x reauthentication\nno dot1x reauthentication\ndefault dot1x reauthentication",
    "desc": "The dot1x reauthentication command configures the configuration mode interface to require reauthentication from clients at regular intervals."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dot1x reauthorization request limit",
    "cmd": "dot1x reauthorization request limit attempts\nno dot1x reauthorization request limit\ndefault dot1x reauthorization request limit",
    "desc": "The dot1x reauthorization request limit command configures how often the switch retransmits an 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dot1x system-auth-control",
    "cmd": "dot1x system-auth-control\nno dot1x system-auth-control\ndefault dot1x system-auth-control",
    "desc": "The dot1x system-auth-control command enables 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dot1x timeout quiet-period",
    "cmd": "dot1x timeout quiet-period quiet_time\nno dot1x timeout quiet-period\ndefault dot1x timeout quiet-period",
    "desc": "If the switch fails to immediately authenticate the client, the switch waits a specified time configured with the dot1x timeout quiet-period command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dot1x timeout reauth-period",
    "cmd": "dot1x timeout reauth-period reauth_time\nno dot1x timeout reauth-period\ndefault dot1x timeout reauth-period",
    "desc": "The dot1x timeout reauth-period command specifies the time period that the configuration mode interface waits before requiring re-authentication from clients."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dot1x timeout tx-period",
    "cmd": "dot1x timeout tx-period tx_time\nno dot1x timeout tx-period\ndefault dot1x timeout tx-period",
    "desc": "The authenticator establishes authentication and re-authentication by sending Extensible Authentication Protocol (EAP) requests to the supplicant, and the supplicant sends a reply which the authenticator forwards"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dot1x host-mode",
    "cmd": "dot1x host-mode [multi-host | single-host | multi-host authenticated]\nno dot1x host-mode\ndefault dot1x host-mode",
    "desc": "When multiple clients are connected to an Ethernet interface providing 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dot1x port-control",
    "cmd": "dot1x port-control STATE\nno dot1x port-control\ndefault dot1x port-control",
    "desc": "The dot1x port-control command configures the configuration mode interface as an authenticator port and specifies whether it will authenticate traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "neighbor classification",
    "cmd": "neighbor classification post-auth action port-flap\nno neighbor classification post-auth action port-flap\ndefault neighbor classification post-auth action port-flap",
    "desc": "The neighbor classification command in the Global Configuration Mode centralizes how the switch responds when it identifies a device, such as a VoIP phone, and moves between different classes such as moving from a generic host to a phone."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "neighbor resolution",
    "cmd": "neighbor resolution interface interface [ neighbor ipv4 | ipv6] ] [mac-address\nmac_address]\nno neighbor resolution",
    "desc": "The neighbor resolution command in the Global Configuration Mode enters the Neighbor Resolution Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "radius mtu",
    "cmd": "radius mtu bytes\nno radius mtu",
    "desc": "The radius mtu command in the Dot1X Configuration Mode configures the size of the RADIUS AccessRequest Maximum Transmission Unit (MTU) for an 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show dot1x all brief",
    "cmd": "show dot1x all brief",
    "desc": "The show dot1x all brief command displays the IEEE 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show dot1x hosts",
    "cmd": "show dot1x hosts [ethernet]",
    "desc": "The show dot1x hosts command displays 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show dot1x statistics",
    "cmd": "show dot1x INTERFACE_NAME statistics",
    "desc": "The show dot1x statistics command displays 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show dot1x",
    "cmd": "show dot1x INTERFACE_NAME INFO",
    "desc": "The show dot1x command displays 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show dot1x captive-portal bypass",
    "cmd": "show dot1x captive-portal bypass address [ipv4 | ipv6]",
    "desc": "The show dot1x captive-portal bypass command displays information about dot1x captive portal bypass configurations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show dot1x captive-portal resolutions",
    "cmd": "show dot1x captive-portal resolutions address [ipv4 | ipv6]",
    "desc": "The show dot1x captive-portal resolutions command displays information for all reverse DNS resolution entries in use by the captive portal."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "web4.it.arista.com",
    "cmd": "web4.it.arista.com",
    "desc": "2033-05-17 20:33:23 web5."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "IP NAT",
    "cmd": "IP NAT",
    "desc": "Network Address Translation (NAT) is a router process that modifies the address information of IP packets in transit."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "Static IP NAT",
    "cmd": "Static IP NAT",
    "desc": "Static NAT configurations create a one-to-one mapping and translate a particular address to another address."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Static NAT Configuration Considerations",
    "cmd": "interface ethernet 1",
    "desc": "Egress VLAN Filter for Static NAT When a static source NAT is configured on an interface, the source IP translation happens only for those packets going 'out' of this interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "Dynamic NAT",
    "cmd": "Dynamic NAT",
    "desc": "Dynamic NAT offers a solution when fewer outside addresses are available than the number of internal hosts requiring external access."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "Prefix",
    "cmd": "clear ip nat flow translation",
    "desc": "12 switch# Clearing IP NAT Table Entries Use the clear ip nat flow translation command to remove all or the specified NAT table entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Dynamic NAT Configuration Considerations",
    "cmd": "interface port-channel 319",
    "desc": "Configuring Dynamic NAT Using Pools in a L2 Adjacent Network When configuring many-to-one dynamic NAT using a NAT pool, and the next hop router for the NAT device is on the same network (L2 adjacent), you must configure the IP addresses in the NAT po…"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "Dynamic NAT Peer State Synchronization",
    "cmd": "Dynamic NAT Peer State Synchronization",
    "desc": "The NAT peer state synchronization provides redundancy and resiliency for dynamic NAT across a pair of devices to avoid a single NAT device failure."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "Prefix",
    "cmd": "Prefix",
    "desc": "12 switch# • These commands display specific information for the address pools configured on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "IP NAT Commands",
    "cmd": "IP NAT Commands",
    "desc": "IP NAT Commands • clear ip nat flow translation • ip address • ip nat destination static • ip nat pool • ip nat source dynamic • ip nat source static • ip nat translation counters • ip nat translation low-mark"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "clear ip nat flow translation",
    "cmd": "clear ip nat flow translation [HOST_ADDR [DEST_ADDR]][INTF][PROT_TYPE]",
    "desc": "The clear ip nat flow translation command clears all or the specified NAT table entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "ip address",
    "cmd": "ip address [ipv4_subnet][PRIORITY]\nno ip address [ipv4_subnet][PRIORITY]\ndefault ip address [ipv4_subnet][PRIORITY]",
    "desc": "The ip address command configures the IPv4 address and connected subnet on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "ip nat destination static",
    "cmd": "ip nat destination static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE][group\nno ip nat destination static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE] [group\ndefault ip nat destination static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE][group",
    "desc": "The ip nat destination static command enables NAT of a specified destination address for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "ip nat pool",
    "cmd": "ip nat pool pool_name [ADDRESS_SPAN] SUBNET_SIZE\nno ip nat pool pool_name\ndefault ip nat pool pool_name",
    "desc": "The ip nat pool command identifies a pool of addresses using start address, end address, and either netmask or prefix length."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "ip nat source dynamic",
    "cmd": "ip nat source dynamic access-list acl_name POOL_TYPE\nno ip nat source dynamic access-list acl_name\ndefault ip nat source dynamic access-list acl_name",
    "desc": "The ip nat source dynamic command enables NAT of a specified source address for packets sent and received on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "ip nat source static",
    "cmd": "ip nat source static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE] [group group_number]\nno ip nat source static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE] [group group_number]\ndefault ip nat source static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE] [group",
    "desc": "The ip nat source static command enables NAT of a specified source address for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "ip nat synchronization",
    "cmd": "ip nat synchronization [description description] [expiry-interval seconds]",
    "desc": "The ip nat synchronization command places the switch into the NAT Synchronization Configuration Mode and configures NAT Synchronization to provide redundancy and resiliency for dynamic NAT across a pair of switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "ip nat translation counters",
    "cmd": "ip nat translation counters\nno ip nat translation counters\ndefault ip nat translation counters\nconnections exceed 275, it can cause unpredictable behavior including restart of FocalPointV2 agent. The\nrestart of FocalPointV2 agent results in traffic disruption.",
    "desc": "The ip nat translation counters command enables the feature to count packets that are translated by static and twice NAT rules in hardware."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "ip nat translation low-mark",
    "cmd": "ip nat translation low-mark threshold\nno ip nat translation low-mark\ndefault ip nat translation low-mark",
    "desc": "The ip nat translation low-mark command configures the minimum threshold that triggers the resumption of programming new NAT translation connections."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "ip nat translation max-entries",
    "cmd": "ip nat translation max-entries connections\nno ip nat translation max-entries\ndefault ip nat translation max-entries",
    "desc": "The ip nat translation max-entries command specifies maximum number of NAT translation connections."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "ip nat translation tcp-timeout",
    "cmd": "ip nat translation tcp-timeout period\nno ip nat translation tcp-timeout\ndefault ip nat translation tcp-timeout",
    "desc": "The ip nat translation tcp-timeout command specifies the translation timeout period for translation table entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "ip nat translation udp-timeout",
    "cmd": "ip nat translation udp-timeout period\nno ip nat translation udp-timeout\ndefault ip nat translation udp-timeout",
    "desc": "The ip nat translation udp-timeout command specifies the translation timeout period for translation table entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "show ip nat access-list interface",
    "cmd": "show ip nat access-list interface [INTF][LISTS]",
    "desc": "The show ip nat acl interface command displays the access control lists (ACLs) that are configured as source NAT or destination NAT filters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "show ip nat pool",
    "cmd": "show ip nat pool POOL_SET",
    "desc": "The show ip nat pool command displays the configuration of the address pool."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "p2",
    "cmd": "p2",
    "desc": "Applying NAT profile on a Tunnel Interface"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "p3",
    "cmd": "p3",
    "desc": "Applying NAT profile on a Tunnel Interface"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "show ip nat synchronization advertised-translations",
    "cmd": "show ip nat synchronization advertised-translations",
    "desc": "The show ip nat synchronization advertised-translations command displays the detailed status of devices that are advertised to a peer device."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "show ip nat synchronization discovered-translations",
    "cmd": "show ip nat synchronization discovered-translations",
    "desc": "The show ip nat synchronization discovered-translations command displays details of what has been advertised from a peer device."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "show ip nat synchronization peer",
    "cmd": "show ip nat synchronization peer",
    "desc": "The show ip nat synchronization peer command displays the detailed status of a peer device."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "show ip nat translation",
    "cmd": "show ip nat translation",
    "desc": "The show ip nat translation command displays configured NAT statements in the switch hardware."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VLAN Tagged MACsec",
    "cmd": "VLAN Tagged MACsec",
    "desc": "Media Access Control Security (MACsec) is configured on subinterfaces using the mac security profile command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "an (MACsec)",
    "cmd": "an an_number key key_type key_string\nno an an_number\ndefault an an_number",
    "desc": "The an command defines an Association Number (AN) and a Secure Association Key (SAK) for use in the selected channel in MACsec."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "cipher",
    "cmd": "cipher encryption_standard",
    "desc": "The cipher command configures the cipher authentication for MAC security on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dot1x pae supplicant",
    "cmd": "dot1x pae supplicant",
    "desc": "The dot1x pae supplicant command applies the supplicant profile by enabling it on the Mac Security interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dot1x timeout reauth-timeout-ignore always",
    "cmd": "dot1x timeout reauth-timeout-ignore always",
    "desc": "The dot1x timeout reauth-timeout-ignore always command retains the current port state without blocking it, irrespective of when the authentication server is unreachable or in case of supplicant timeouts."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dot1x",
    "cmd": "dot1x",
    "desc": "The dot1x command places the switch in the dot1x mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "entropy source hardware",
    "cmd": "entropy source hardware",
    "desc": "The entropy source hardware command generates the cryptographic keys to strengthen the random number generator used by MACsec."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "identifier (MACsec)",
    "cmd": "identifier MAC_address\nno identifier\ndefault identifier",
    "desc": "The identifier command defines a Secure Channel Identifier (SCI) for the Rx or Tx secure channel for use with MACsec static Secure Association Keys (SAKs)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "key (MACsec)",
    "cmd": "key <options>",
    "desc": "The key command configures the primary key to activate the MACsec profile Note: Optionally a fallback CAK can also be configured on a profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "key retirement immediate",
    "cmd": "key retirement immediate",
    "desc": "The key retirement immediate command configures the key retirement feature on the key server and assists the key server to decide the principal actor for SAK distribution by triggering the re-election of principal"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "license (Global Mode)",
    "cmd": "license [[import URL] | update]",
    "desc": "The license command configures EOS licenses on the switch under the global configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "license (MACsec)",
    "cmd": "license licensee_name license_value",
    "desc": "The license command configures the MACsec license on the switch under the MAC Security configuration mode using a hex key."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "l2-protocol",
    "cmd": "l2-protocol ethernet-flow-control [bypass | encrypt]\nno l2-protocol ethernet-flow-control [bypass | encrypt]\ndefault l2-protocol ethernet-flow-control [bypass | encrypt]",
    "desc": "The command l2-protocol configures the Layer 2 protocol processing for MACsec."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "mac security",
    "cmd": "mac security\nno mac security\ndefault mac security",
    "desc": "The mac security command enables MAC security provision on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "mac security profile",
    "cmd": "mac security profile profile-name\nno mac security profile profile-name\ndefault mac security profile profile-name",
    "desc": "The mac security profile command applies a MACsec profile to an interface or subinterface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "mka key-server",
    "cmd": "mka key-server [priority value]",
    "desc": "The mka key-server command configures key server among the MACsec peers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "mka session",
    "cmd": "mka session [rekey-period value]",
    "desc": "The mka session command configures period at which the SAK is refreshed ."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "profile (MACsec)",
    "cmd": "profile profile-name",
    "desc": "The profile command places the switch in MAC Security Profile configuration mode and creates a MACsec profile if a profile of the specified name does not already exist."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "replay",
    "cmd": "replay protection {disabled | window window_size}\nno replay protection {disabled | window window_size}\ndefault replay protection {disabled | window window_size}",
    "desc": "The replay command configures the action to be taken when packets received are not in order, based on their packet numbers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "sci",
    "cmd": "sci",
    "desc": "The sci command add a Secure Channel Identifier (SCI) in data packets for MACsec on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "secure channel (MACsec)",
    "cmd": "secure channel {Rx|Tx}",
    "desc": "The secure channel command enters MAC Security Profile Static SAK Secure Channel configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show dot1x supplicant",
    "cmd": "show dot1x supplicant",
    "desc": "The show dot1x supplicant command displays the 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mac security counters detail",
    "cmd": "show mac security counters detail",
    "desc": "The show mac security counters detail command to displays the detail information about the MACsec security counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mac security counters",
    "cmd": "show mac security counters",
    "desc": "The show mac security counters command to displays information about the MACsec security counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mac security interface detail",
    "cmd": "show mac security interface detail",
    "desc": "The show mac security interface detail command displays the detail information about the MACsec on the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mac security interface",
    "cmd": "show mac security interface",
    "desc": "The show mac security interface command shows information about MACsec on the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mac security mka counters",
    "cmd": "show mac security mka counters",
    "desc": "The show mac security mka counters command to display information about the MACsec MKA counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mac security participants detail",
    "cmd": "show mac security participants detail",
    "desc": "The show mac security participants detail command displays detail information about the MACsec participants."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mac security profile",
    "cmd": "show mac security profile [profile_name]",
    "desc": "The show mac security profile command displays information about the specified MACsec profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "show mac security sak",
    "cmd": "show mac security sak [interface ethernet Ethernet_interface]",
    "desc": "The show mac security sak command displays information about MACsec static secure association key (SAK) status for the specified Ethernet interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mac security status",
    "cmd": "show mac security status",
    "desc": "The show mac security status command displays the MACsec status information on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "supplicant profile",
    "cmd": "supplicant profile profile_name options",
    "desc": "The supplicant profile command configures the supplicant profile containing all the credentials necessary for 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "traffic unprotected allow",
    "cmd": "traffic unprotected allow\nno traffic unprotected allow",
    "desc": "The traffic unprotected allow command configures the switch to allow the unprotected traffic whenever there is no successful MKA session established with the peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "IPsec Introduction",
    "cmd": "IPsec Introduction",
    "desc": "Internet Protocol Security (IPsec) is a protocol suite for securing Internet Protocol (IP) communications by authenticating and encrypting each IP packet of a communication session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "IPsec Overview",
    "cmd": "IPsec Overview",
    "desc": "Internet Protocol Security (IPsec)"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "IPSec Key Length Support",
    "cmd": "IPSec Key Length Support",
    "desc": "EOS provides a restriction on the combinations of IKE and IPSec algorithms used for a security combination."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "ike policy",
    "cmd": "ike policy policy-name\nno ike policy policy-name",
    "desc": "The ike policy command configures the Internet Security Association and Key Management Protocol on the switch and related policies."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "interface tunnel (IPsec)",
    "cmd": "interface tunnel value\nno interface tunnel value",
    "desc": "The interface tunnel command places the switch in the Interface Tunnel Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "ip security",
    "cmd": "ip security\nno ip security",
    "desc": "The ip security command places the switch in the IP Security Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "ip security encryption key-length",
    "cmd": "ip security encryption key-length aligned\nno ip security encryption key-length\ndefault ip security encryption key-length",
    "desc": "The ip security encryption key-length command in the IP Security Configuration Mode enables key-length checking for IKE and IPSec algorithms."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "sa policy",
    "cmd": "sa policy policy_name\nno sa policy policy_name",
    "desc": "The sa policy command specifies a Security Association (SA) policy used for IPsec configuration, and enters IP security SA policy configuration mode to configure the named policy."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip security applied-profile",
    "cmd": "show ip security applied-profile",
    "desc": "The show ip security applied-profile command displays the IP security profile names and the corresponding interfaces with the profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip security connection",
    "cmd": "show ip security connection",
    "desc": "The show ip security connection command displays the IP security connection status information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip security encryption",
    "cmd": "show ip security encryption key-length status",
    "desc": "The show ip security encryption command displays the IP security encryption status information."
  },
  {
    "os": "eos",
    "role": "firewall",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip security policy",
    "cmd": "show ip security policy",
    "desc": "The show ip security policy command displays the IP security policy information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip security profile",
    "cmd": "show ip security profile",
    "desc": "The show ip security profile command displays the IP security profile information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip security security-association",
    "cmd": "show ip security security-association",
    "desc": "The show ip security security-association command displays the IP security SA information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "System Requirements",
    "cmd": "System Requirements",
    "desc": "The system requirements to effectively run MSS are listed below."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "dynamic device-set",
    "cmd": "dynamic device-set device-set_name\nno dynamic device-set device-set_name",
    "desc": "The dynamic device-set command configures a device such as a firewall to communicate with the MSS in the MSS configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "exception device",
    "cmd": "exception device unreachable [bypass | redirect]\nno exception device unreachable [bypass | redirect]\ndefault exception device unreachable bypass",
    "desc": "The exception device command bypasses or continues redirecting traffic to service device such as a firewall if the service device control-plane API is unreachable after initial policies have been processed."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "group",
    "cmd": "group group_name\nno group group_name",
    "desc": "The group command configures the Panorama device group name to be used with MSS."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "name-resolution interval (CVX-OpenStack)",
    "cmd": "name-resolution interval period",
    "desc": "The name-resolution interval command specifies the period between consecutive requests that the OpenStack controller sends to the Keystone service for VM and tenant name updates."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "service mss",
    "cmd": "service mss\nno service mss\ndefault service mss",
    "desc": "The service mss command enters the MSS configuration sub-mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show service mss dynamic device-set",
    "cmd": "show service mss dynamic device-set device_set_name [device device_name [group-members |\nhigh-availability | neighbors | network | policies | resources]]",
    "desc": "The show service mss dynamic device-set command displays detailed information about a specific service device set."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show service mss policy",
    "cmd": "show service mss policy [[device device_name][name policy-name][source (static | plugin_name)]]",
    "desc": "The show service mss policy command displays generic information about the configuration and operational state of the macro-segmentation service (MSS) policies on a device."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show service mss status",
    "cmd": "show service mss status",
    "desc": "The show service mss status command displays the status of a macro-segmentation service (MSS) on the device."
  },
  {
    "os": "eos",
    "role": "firewall",
    "vendor": "Arista",
    "cat": "System",
    "title": "show service mss zone",
    "cmd": "show service mss zone [[device device_name]|[name zone_name]|[source (static | dynamic_source)]]",
    "desc": "The show service mss zone command displays information about the interfaces that are placed in a single zone by the service device."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "state",
    "cmd": "state [active | shutdown | suspend]\nno state",
    "desc": "The state command configures device set as active or disabled or suspended state."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "tag",
    "cmd": "tag tag_name\nno tag\ndefault tag",
    "desc": "The tag command specifies the tag or tags that MSS searches when it is reading the security policy from the firewall or firewall manager in the dynamic device-set configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "type palo-alto",
    "cmd": "type palo-alto [firewall | panorama]\nno type palo-alto",
    "desc": "The type palo-alto command configures the firewall type to be used in the MSS configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Port Settings – Trust Mode and Traffic Class",
    "cmd": "Port Settings – Trust Mode and Traffic Class",
    "desc": "Ethernet and port channel interfaces support three QoS trust modes: • CoS Trust: Ports use inbound packet CoS field contents to derive the traffic class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Traffic Classes",
    "cmd": "Traffic Classes",
    "desc": "Data stream distribution is based on their traffic classes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "ACL Policing",
    "cmd": "ACL Policing",
    "desc": "ACL policing monitors the ingress data rates for a particular class of traffic and performs the action configured when the traffic exceeds the user configured value."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "IPv6 Flow Label Matches for QoS",
    "cmd": "IPv6 Flow Label Matches for QoS",
    "desc": "Certain packets may include a flow label in their IPv6 headers when the source requests special handling by routers, such as for a media stream or other “real-time” service, among others."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Traffic Class Derivations – Arad Platform Switches",
    "cmd": "qos map cos 1 3 5 7 to traffic-class 5",
    "desc": "Traffic Classes describes traffic classes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "ACL Policing – Arad Platform Switches",
    "cmd": "class-map type qos match-any class1",
    "desc": "ACL Policing describes ACL policing."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Traffic Class",
    "cmd": "qos map traffic-class 1 3 5 to tx-queue 1",
    "desc": "DSCP Rewrite Value Transmit Queues and Port Shaping – FM6000 Platform Switches Transmit Queues and Port Shaping describes transmit queues and port shaping."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Traffic Class",
    "cmd": "default interface ethernet 7",
    "desc": "DSCP Transmit Queues and Port Shaping – Trident and Tomahawk Platform Switches Transmit Queues and Port Shaping describes transmit queues and port shaping."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Traffic Class Derivations – Petra Platform Switches",
    "cmd": "platform petraA petra3/4 traffic-class 5",
    "desc": "Traffic Classes describes traffic classes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "ACL Based QoS (DCS-7160)",
    "cmd": "ACL Based QoS (DCS-7160)",
    "desc": "The IPv4 ACL based QoS is enabled on switches through policy-map configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "ACL based QoS on SVIs",
    "cmd": "ACL based QoS on SVIs",
    "desc": "The ACL based QoS policy applied on SVIs modify the QoS parameters for SVI traffic (L3 VLAN) based on ACL classification."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "ACL Sharing on QoS",
    "cmd": "ip access-list acl1",
    "desc": "The ACLs applied on QoS shares the hardware resources (TCAM) when potentially large QoS policy-maps are applied to multiple SVIs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "txQueue Percentage-based Shaping",
    "cmd": "txQueue Percentage-based Shaping",
    "desc": "When you enable this feature using the qos tx-queue shape rate percent percentage adaptive command, QoS calculates the txQueue shape rate based the available bandwidth and not the link speed."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "bandwidth guaranteed (Helix)",
    "cmd": "bandwidth guaranteed DATA_MIN\nno bandwidth guaranteed\ndefault bandwidth guaranteed",
    "desc": "The bandwidth guaranteed command specifies the minimum bandwidth for outbound traffic on the transmit queue."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "bandwidth guaranteed (Trident II)",
    "cmd": "bandwidth guaranteed rate DATA_MIN\nno bandwidth guaranteed\ndefault bandwidth guaranteed",
    "desc": "The bandwidth guaranteed command specifies the minimum bandwidth for outbound traffic on the transmit queue."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "bandwidth percent (Arad/Jericho)",
    "cmd": "bandwidth percent proportion\nno bandwidth percent\ndefault bandwidth percent",
    "desc": "The bandwidth percent command configures the bandwidth share of the transmit queue when configured for round robin priority."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "color",
    "cmd": "color COLOR-VALUE [color-only [exact-match | [endpoint-match [any | null]]]]",
    "desc": "Use the color command for the ability to configure the color extended community in route-map set clauses and in an extcommunity-list for inbound and outbound policy application."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "dscp to traffic-class (DSCP map)",
    "cmd": "dscp dscp_classes to traffic-class traffic_class\ndefault dscp dscp_classes to traffic-class\nno dscp dscp_classes to traffic-class",
    "desc": "The dscp to traffic-class command configures the specified QoS map to map one or more DSCP classes to a traffic class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "hardware access-list qos resource sharing vlan in",
    "cmd": "hardware access-list qos resource sharing vlan in\nno hardware access-list qos resource sharing vlan in",
    "desc": "The hardware access-list qos resource sharing vlan in command enables the ACL based QoS resources sharing on a VLAN interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "interface fabric (Trident II)",
    "cmd": "interface fabric",
    "desc": "The interface fabric command places the switch in Fabric-interface configuration mode and allows the user to attach the QoS profile to the fabric interface of the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "ip extcommunity-list",
    "cmd": "ip extcommunity-list WORD [permit | deny][COLOR-EXPRESSION]\nno ip extcommunity-list WORD [permit | deny] COLOR-EXPRESSION]\ndefault ip extcommunity-list WORD [permit | deny][COLOR-EXPRESSION]",
    "desc": "The ip extcommunity-list command adds a color extended community to an extcommunitylist."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "mc-tx-queue",
    "cmd": "mc-tx-queue queue_level",
    "desc": "The mc-tx-queue command places the switch in mc-tx-queue configuration mode to configure a multicast transmit queue on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "platform petraA traffic-class",
    "cmd": "platform petraA [CHIP_NAME] traffic-class tc_value\nno platform petraA [CHIP_NAME] traffic-class\ndefault platform petraA [CHIP_NAME] traffic-class",
    "desc": "The platform petraA traffic-class command configures the default traffic class used by all ports on a specified chip."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "priority (Arad/Jericho)",
    "cmd": "priority strict\nno priority\ndefault priority",
    "desc": "The priority command specifies the priority of the transmit queue."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos cos",
    "cmd": "qos cos cos_value\nno qos cos\ndefault qos cos",
    "desc": "The qos cos command specifies the default class of service (CoS) value of the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos dscp",
    "cmd": "qos dscp dscp_value\nno qos dscp\ndefault qos dscp",
    "desc": "The qos dscp command specifies the default Differentiated Services Code Point (DSCP) value of the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos map cos",
    "cmd": "qos map cos cos_value_1 [cos_value_2 ... cos_value_n] to traffic-class tc_value [dropprecedence dp_value]\nno qos map cos cos_value_1 [cos_value_2 ... cos_value_n ]\ndefault qos map cos cos_value_1 [cos_value_2 ... cos_value_n]",
    "desc": "The qos map cos command associates a traffic class to a list of class of service (CoS) settings."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos map dscp",
    "cmd": "qos map dscp dscpv_1 [dscpv_2...dscpv_n] to traffic-class tc_value\nno qos map dscp dscpv_1 [dscpv_2...dscpv_n]\ndefault qos map dscp dscpv_1 [dscpv_2...dscpv_n]",
    "desc": "The qos map dscp command associates a traffic class to a set of Differentiated Services Code Point (DSCP) values."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos map dscp to traffic-class",
    "cmd": "qos map dscp to traffic-class name map_name\nno qos map dscp to traffic-class name map_name\ndefault qos map dscp to traffic-class name map_name",
    "desc": "The qos map dscp to traffic-class command puts the switch in DSCP Map Configuration mode for the specified QoS map."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "qos map dscp to traffic-class (MPLS tunnel termination VRF)",
    "cmd": "qos map dscp to traffic-class map_name\nno qos map dscp to traffic-class map_name\ndefault qos map dscp to traffic-class map_name",
    "desc": "The qos map dscp to traffic-class command assigns a DSCP-to-traffic-class map to a VRF, replacing the global map or previous custom map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos map traffic-class to cos",
    "cmd": "qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to cos cos_value\nno qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to cos\ndefault qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to cos",
    "desc": "The qos map traffic-class to cos command associates a class of service (CoS) to a list of traffic classes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos map traffic-class to dscp",
    "cmd": "qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to dscp dscp_value\nno qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to dscp\ndefault qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to dscp",
    "desc": "The qos map traffic-class to dscp command associates a Differentiated Services Code Point (DSCP) value to a list of traffic classes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos map traffic-class to mc-tx-queue",
    "cmd": "qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to mc-tx-queue mtq_value\nno qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to mc-tx-queue\ndefault qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to mc-tx-queue",
    "desc": "The qos map traffic-class to mc-tx-queue command associates a multicast transmit queue to a list of traffic classes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos map traffic-class to tx-queue",
    "cmd": "qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to tx-queue txq_value\nno qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to tx-queue\ndefault qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to tx-queue",
    "desc": "The qos map traffic-class to tx-queue command associates a transmit queue (tx-queue) to a list of traffic classes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos map traffic-class to uc-tx-queue",
    "cmd": "qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to uc-tx-queue utq_value\nno qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to uc-tx-queue\ndefault qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to uc-tx-queue",
    "desc": "The qos map traffic-class to uc-tx-queue command associates a unicast transmit queue to a list of traffic classes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos profile",
    "cmd": "qos profile profile_name\nno qos profile profile_name\ndefault qos profile profile_name",
    "desc": "The qos profile command places the switch in QoS profile configuration mode and for the specified profile and creates the profile if it does not already exist."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos random-detect ecn allow non-ect chip-based (Tomahawk and Trident)",
    "cmd": "qos random-detect ecn allow non-ect chip-based\nno qos random-detect ecn allow non-ect chip-based\ndefault qos random-detect ecn allow non-ect chip-based",
    "desc": "The qos random-detect ecn allow non-ect chip-based enables per color queue thresholds using color based queue thresholds and drop-precedence values along with drop of non-ect traffic by allowing non-ect and set drop-precedence 1 in a policy map simultaneously."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos random-detect ecn global-buffer (Helix)",
    "cmd": "qos random-detect ecn global-buffer minimum-threshold MIN maximum-threshold MAX\nno qos random-detect ecn global-buffer\ndefault qos random-detect ecn global-buffer",
    "desc": "The qos random-detect ecn global-buffer command enables ECN marking for globally shared packet memory and specifies minimum and maximum queue threshold sizes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos rewrite cos",
    "cmd": "qos rewrite cos\nno qos rewrite cos\ndefault qos rewrite cos",
    "desc": "The qos rewrite cos command enables the rewriting of the CoS field for outbound tagged packets that were received on DSCP trusted ports and untrusted ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos rewrite dscp",
    "cmd": "qos rewrite dscp\nno qos rewrite dscp\ndefault qos rewrite dscp",
    "desc": "The qos rewrite dscp command enables the rewriting of the DSCP field for outbound tagged packets that were received on CoS trusted ports and untrusted ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos tx-queue shape rate precision",
    "cmd": "qos tx-queue shape rate precision 50Mbps\nno qos tx-queue shape rate precision\ndefault qos tx-queue shape rate precision",
    "desc": "The qos tx-queue shape rate precision command in the Global Configuration Mode configures Tx Queue Precision Shaping on switches with a low configured rate."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos trust",
    "cmd": "qos trust [MODE]\nno qos trust [MODE]\ndefault qos trust",
    "desc": "The qos trust command configures the quality of service port trust mode for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "random-detect ecn (Arad/Jericho)",
    "cmd": "random-detect ecn minimum-threshold [MIN | MAX]| maximum-threshold [MIN | MAX]\nno random-detect ecn\ndefault random-detect ecn",
    "desc": "The random-detect ecn command enables ECN marking for the configuration mode unicast transmit queue and specifies threshold queue sizes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "random-detect ecn (Helix)",
    "cmd": "random-detect ecn minimum-threshold [MIN | MAX] maximum-threshold [MIN | MAX]\nno random-detect ecn\ndefault random-detect ecn",
    "desc": "The random-detect ecn command enables ECN marking for the configuration mode unicast transmit queue and specifies threshold queue sizes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "random-detect ecn delay threshold",
    "cmd": "random-detect ecn delay threshold [microseconds | milliseconds ]",
    "desc": "The random-detect ecn delay threshold command configures latency-based ECN on a per transmit queue basis."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "service-policy type qos input",
    "cmd": "service-policy type qos input policy_map_name\nno service-policy type qos input policy_map_name\ndefault service-policy type qos input policy_map_name",
    "desc": "The service-policy type qos input command applies the specified policy map to a QoS profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "service-profile",
    "cmd": "service-profile profile_name\nno service-profile profile_name\ndefault service-profile profile_name",
    "desc": "The command applies the QoS profile to the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "set extcommunity",
    "cmd": "set extcommunity COLOR-EXPRESSION [additive | delete]\nno set extcommunity COLOR-EXPRESSION [additive | delete]\ndefault set extcommunity COLOR-EXPRESSION [additive | delete]",
    "desc": "The set extcommunity command adds a color extended community to be applied to routes affected by the route-map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "shape rate (Interface – Arad/Jericho)",
    "cmd": "shape rate byte_limit [kbps]\nno shape rate\ndefault shape rate",
    "desc": "The shape rate command specifies the maximum bandwidth for outbound traffic on the configuration mode interface, also known as queue shaping."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "shape rate (Interface – Helix)",
    "cmd": "shape rate DATA_LIMIT\nno shape rate\ndefault shape rate",
    "desc": "The shape rate command specifies the maximum bandwidth for outbound traffic on the configuration mode interface, also known as queue shaping."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "shape rate (Interface – Petra)",
    "cmd": "shape rate data_limit [kbps]\nno shape rate\ndefault shape rate",
    "desc": "The shape rate command specifies the maximum bandwidth for outbound traffic on the configuration mode interface, also known as queue shaping."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show interface counters queue drop-precedence",
    "cmd": "show interface counters queue drop-precedence",
    "desc": "The show interface counters queue drop-precedence command displays the dropprecedence counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform petraA traffic-class",
    "cmd": "show platform petraA traffic-class\nshow platform petraA CHIP_NAME traffic-class\nshow platform petraA MODULE_NAME traffic-class",
    "desc": "The show platform petraA traffic-class command displays the traffic class assignment on all specified Petra chips."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show platform trident tcam qos detail",
    "cmd": "show platform trident tcam qos detail",
    "desc": "The show platform trident tcam qos detail command displays the list of all the SVIs that are sharing the TCAM entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show platform trident tcam shared vlan interface-class-id",
    "cmd": "show platform trident tcam shared vlan interface-class-id",
    "desc": "The show platform trident tcam shared vlan interface-class-id command displays what SVIs are currently sharing the QoS policy-map in the below output under QoS PMAP Data."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show platform xp qos tcam hit",
    "cmd": "show platform xp qos tcam hit",
    "desc": "The show platform xp qos tcam hit command displays the TCAM entries programmed for each policy-map as well as the traffic hits."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show policy-map interface",
    "cmd": "show policy-map interface interface_name",
    "desc": "The show policy-map interface command displays contents of the policy map applied to specified the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show policy-map",
    "cmd": "show policy-map policy_map_name [counters][interface | summary]",
    "desc": "The show policy-map command displays the policy map information for the configured policy map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show qos interfaces random-detect ecn",
    "cmd": "show qos interfaces [INTERFACE_NAME] random-detect ecn",
    "desc": "The show qos interfaces random-detect ecn command displays the Explicit Congestion Notification (ECN) configuration for each transmit queue on the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show qos interfaces trust",
    "cmd": "show qos interfaces [INTERFACE_NAME] trust",
    "desc": "The show qos interfaces trust command displays the configured and operational QoS trust mode of all specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show qos interfaces",
    "cmd": "show qos interfaces INTERFACE_NAME",
    "desc": "The show qos interfaces command displays the QoS, DSCP, and transmit queue configuration on a specified interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show qos interfaces latency maximum",
    "cmd": "show qos interfaces INTERFACE_NAME latency maximum",
    "desc": "The show qos interfaces latency maximum command displays the maximum latency tail-drop threshold active on each Tx queue for a specified interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show qos maps",
    "cmd": "show qos maps",
    "desc": "The show qos maps command lists the number of traffic classes that the switch supports and displays the CoS-Traffic Class, DSCP-Traffic Class, Traffic Class-CoS, and Traffic Class-Transmit Queue maps."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show qos map dscp to traffic-class",
    "cmd": "show qos map dscp to traffic-class [ map_name ]",
    "desc": "The show qos map dscp to traffic-class command shows all DSCP to traffic-class maps, or one specified DSCP to TC map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show qos profile summary",
    "cmd": "show qos profile summary",
    "desc": "The show qos profile summary command displays the QoS profile summary of those which are part of the running configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show qos profile",
    "cmd": "show qos profile profile_name",
    "desc": "The show qos profile command displays the contents of the specified QoS profile or of all QoS profiles in the running configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show qos random-detect ecn",
    "cmd": "show qos random-detect ecn",
    "desc": "The command displays the global Explicit Congestion Notification (ECN) configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show qos tx-queue shape rate precision",
    "cmd": "show qos tx-queue shape rate precision",
    "desc": "The show qos tx-queue shape rate precision command displays information about Tx Queue Precision Shaping on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show run|grep sharing",
    "cmd": "show run|grep sharing",
    "desc": "The show run|grep sharing command displays whether the QoS policy-map sharing on SVIs is enabled or disabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "tx-queue (Arad/Jericho)",
    "cmd": "tx-queue queue_level",
    "desc": "The tx-queue command places the switch in Tx-queue configuration mode to configure a transmit queue on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "uc-tx-queue",
    "cmd": "uc-tx-queue queue_level",
    "desc": "The uc-tx-queue command places the switch in the uc-tx-queue configuration mode to configure a unicast transmit queue on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "Traffic Management",
    "cmd": "Traffic Management",
    "desc": "This chapter describes Traffic Management on Arista switches, including configuration instructions and command descriptions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "Traffic Management Conceptual Overview",
    "cmd": "Traffic Management Conceptual Overview",
    "desc": "Traffic is managed through policy maps that apply data shaping methods to specific data streams."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Segment Routing Traffic Engineering Policy (SR-TE)",
    "cmd": "Segment Routing Traffic Engineering Policy (SR-TE)",
    "desc": "Segment Routing Traffic Engineering Policy (SR-TE) policy uses Segment Routing (SR) to enable a headend to steer traffic along any path without maintaining per flow state in every node based on the policy."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "from 100.1.1.2 (100.1.1.2)",
    "cmd": "from 100.1.1.2 (100.1.1.2)",
    "desc": "Origin INCOMPLETE, metric 0, localpref 100, IGP metric 0, weight 0, received 00:01:29 ago, valid, internal, best Community: no-advertise Rx SAFI: SR TE Policy The following command displays information about a specific candidate path including the co…"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Traffic Management Configuration Arad Platform Switches",
    "cmd": "Traffic Management Configuration Arad Platform Switches",
    "desc": "Traffic policies are implemented by policy maps, which are applied to the control plane, or to L3 interfaces for Policy-Based Routing (PBR)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Traffic Management Configuration FM6000 Platform Switches",
    "cmd": "Traffic Management Configuration FM6000 Platform Switches",
    "desc": "Traffic policies are implemented by policy maps, which are applied to the control plane or an interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Traffic Management Configuration Petra Platform Switches",
    "cmd": "Traffic Management Configuration Petra Platform Switches",
    "desc": "Traffic policies are implemented by policy maps, which are applied to the control plane."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Traffic Management Configuration Trident Platform Switches",
    "cmd": "Traffic Management Configuration Trident Platform Switches",
    "desc": "Traffic policies are implemented by policy maps, which are applied to the control plane or an interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Traffic Management Configuration Trident II Platform Switches",
    "cmd": "Traffic Management Configuration Trident II Platform Switches",
    "desc": "Traffic policies are implemented by policy maps, which are applied to the control plane or an interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Traffic Management Configuration Commands",
    "cmd": "Traffic Management Configuration Commands",
    "desc": "Traffic Policy (Control Plane) Configuration Commands • bandwidth (policy-map-class (control-plane) Arad) • bandwidth (policy-map-class (control-plane) FM6000) • bandwidth (policy-map-class (control-plane) Helix)"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "action set-ttl",
    "cmd": "action set-time [set-ttl | set-ttl-3b]\nno action set-time [set-ttl | set-ttl-3b]\ndefault action set-time [set-ttl | set-ttl-3b]",
    "desc": "The TTL action is effective only when it is configured along with a set nexthop or nexthop-group action."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "bandwidth (policy-map-class (control-plane) Arad)",
    "cmd": "bandwidth kbps kilobits\nno bandwidth\ndefault bandwidth",
    "desc": "The bandwidth command specifies the minimum bandwidth for traffic filtered by the configuration mode policy map class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "bandwidth (policy-map-class (control-plane) FM6000)",
    "cmd": "bandwidth pps packets\nno bandwidth\ndefault bandwidth",
    "desc": "The bandwidth command specifies the minimum bandwidth for traffic filtered by the configuration mode policy map class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "class (policy-map (control-plane) Arad)",
    "cmd": "class class_name\nno class class_name\ndefault class class_name",
    "desc": "The class command places the switch in policy-map-class (control plane) configuration mode, which is a group change mode for changing bandwidth and shape parameters associated with a specified class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "class (policy-map (control-plane) Trident)",
    "cmd": "class class_name [PLACEMENT]\nno class class_name [PLACEMENT]\ndefault class class_name [PLACEMENT]",
    "desc": "The class command places the switch in policy-map-class (control plane) configuration mode, which is a group change mode for changing bandwidth and shape parameters associated with a specified class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "class (policy-map (pbr)",
    "cmd": "no [sequence_number] class class_name\ndefault [sequence_number] class class_name\nno [sequence_number]\ndefault [sequence_number]",
    "desc": "The class (policy-map (pbr) command places the switch in policy-map-class (pbr) configuration mode, which is a group change mode that modifies the specified class of the configuration mode PolicyBased Routing (PBR) policy map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "class-map type copp",
    "cmd": "class-map type copp match-any class_name\nno class-map type copp [match-any] class_name\ndefault class-map type copp [match-any] class_name",
    "desc": "The class-map type copp command places the switch in Class-Map (control plane) configuration mode, which is a group change mode that modifies a control-plane dynamic class map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "class-map type pbr",
    "cmd": "class-map type pbr match-any map_name\nno class-map type pbr match-any map_name\ndefault class-map type pbr match-any map_name",
    "desc": "The class-map type pbr command places the switch in the class-map (pbr) configuration mode for the specified class map, and creates the class map if one does not already exist."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "class-map type qos",
    "cmd": "class-map type qos match-any class_name\nno class-map type qos match-any class_name\ndefault class-map type qos match-any class_name",
    "desc": "The class-map type qos command places the switch in the class-map (QoS) configuration mode, which is a group change mode that modifies a QoS dynamic class map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "clear policy-map counters",
    "cmd": "clear policy-map INTERFACE_NAME counters MAP_NAME",
    "desc": "The clear policy-map command resets the specified policy map counters to zero."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "feature pbr",
    "cmd": "feature pbr ip [copy]\nno feature pbr ip [copy]\ndefault feature pbr ip [copy]\nfeature pbr ipv6 [copy | bank]\nno feature pbr ipv6 [copy | bank]\ndefault featue pbr ipv6 [copy | bank]",
    "desc": "Policy-Based Routing (PBR) is a feature that is applied on IPv4 or IPv6 routable ports, to preferentially route packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "feature traffic-policy cpu",
    "cmd": "feature traffic-policy cpu [ipv4 | ipv6]\nno feature traffic-policy cpu [ipv4 | ipv6]\ndefault feature traffic-policy cpu [ipv4 | ipv6]",
    "desc": "The feature traffic-policy cpu command configures the CPU traffic policy features for the IPv4 and IPv6 traffic in user-defined TCAM profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "feature traffic-policy port",
    "cmd": "feature traffic-policy port [ipv4 | ipv6]\nno feature traffic-policy port [ipv4 | ipv6]\ndefault feature traffic-policy port [ipv4 | ipv6]",
    "desc": "The feature traffic-policy port command configures the port-related traffic policy features for the IPv4 and IPv6 traffic in user-defined TCAM profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "match (class-map (control-plane) Helix)",
    "cmd": "match ip access-group list_name\nno match ip access-group list_name\ndefault match ip access-group list_name",
    "desc": "The match command assigns an ACL to the configuration mode class map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "match (class-map (control-plane) Trident II)",
    "cmd": "list_name\nlist_name\nlist_name",
    "desc": "The match command assigns an ACL to the configuration mode class map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "match (class-map (control-plane) Trident)",
    "cmd": "match IP_VERSION access-group list_name\nno match IP_VERSION access-group list_name\ndefault match IP_VERSION access-group list_name",
    "desc": "The match command assigns an ACL to the configuration mode class map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "match (class-map (pbr))",
    "cmd": "no [sequence_number] match [ip | ipv6] access-group list_name\ndefault [sequence_number] [ip | ipv6] access-group list_name\nno [sequence_number]\ndefault [sequence_number]",
    "desc": "The match command assigns ACLs to the configuration mode Policy-Based Routing (PBR) class map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "match (class-map (qos) Trident II)",
    "cmd": "IP_VERSION list_name\nIP_VERSION list_name\nIP_VERSION list_name",
    "desc": "The match command assigns an ACL to the configuration mode class map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "match (policy-map (pbr))",
    "cmd": "no match ip SOURCE_ADDR DEST_ADDR [set nexthop [recursive] NH-addr_1 [NH-addr_2] ...\ndefault match match ip SOURCE_ADDR DEST_ADDR [set nexthop [recursive] NH-addr_1\nno SEQ_NUM\ndefault SEQ_NUM",
    "desc": "The match command creates a policy map clause entry that specifies one filtering condition."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "platform arad tcam counters feature",
    "cmd": "platform arad tcam counters feature [OPTIONS]\nno platform arad tcam counters feature [OPTIONS]\ndefault platform arad tcam counters feature [OPTIONS]",
    "desc": "The platform arad tcam counters feature command enables incrementing PBR hardware counters corresponding to ACL."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "policy-map type copp",
    "cmd": "policy-map type copp copp-system-policy\nno policy-map type copp copp-system-policy\ndefault policy-map type copp copp-system-policy",
    "desc": "The policy-map type copp command places the switch in the policy-map (control plane) configuration mode, which is a group change mode that modifies a control-plane policy map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "policy-map type pbr",
    "cmd": "policy-map type pbr map_name\nno policy-map type pbr map_name\ndefault policy-map type pbr map_name",
    "desc": "The policy-map type pbr command places the switch in policy-map (pbr) configuration mode, which is a group change mode that modifies a Policy-Based Routing (PBR) policy map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "policy-map type quality-of-service",
    "cmd": "policy-map type quality-of-service map_name\nno policy-map type quality-of-service map_name\ndefault policy-map type quality-of-service map_name",
    "desc": "The policy-map type quality-of-service command places the switch in the policy-map (QoS) configuration mode, which is a group change mode that modifies a QoS policy map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "policy-map type quality-of-service counter",
    "cmd": "policy-map type quality-of-service counter per-interface\nno policy-map type quality-of-service counter per-interface\ndefault policy-map type quality-of-service counter per-interface",
    "desc": "The policy-map type quality-of-service counter command in the Global Configuration Mode configures per interface counters for policy map and class map matches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "policy-map type quality-of-service policer",
    "cmd": "policy-map type quality-of-service policer copy map_name\npolicy-map type quality-of-service policer drop counter\nno policy-map type quality-of-service policer\ndefault policy-map type quality-of-service policer",
    "desc": "The policy-map type quality-of-service policer copy command is used to copy an existing QoS policy map to the policy map policer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "resequence (class-map (pbr))",
    "cmd": "resequence [start_num [inc_num]]",
    "desc": "The resequence command assigns sequence numbers to rules in the configuration mode class map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "service-policy type pbr (Interface mode)",
    "cmd": "service-policy type pbr TRAFFIC_DIRECTION map_name\nno service-policy type pbr TRAFFIC_DIRECTION map_name\ndefault service-policy type pbr TRAFFIC_DIRECTION map_name",
    "desc": "The service-policy pbr command applies the specified Policy-Based Routing (PBR) policy map to the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "service-policy type qos (Interface mode)",
    "cmd": "service-policy [type qos] TRAFFIC_DIRECTION map_name\nno service-policy [type qos] TRAFFIC_DIRECTION map_name\ndefault service-policy [type qos] TRAFFIC_DIRECTION map_name",
    "desc": "The service-policy command applies a specified policy map to the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "set (policy-map-class (qos) FM6000)",
    "cmd": "set QOS_TYPE value\nno set QOS_TYPE\ndefault set QOS_TYPE",
    "desc": "The set command specifies traffic resolution methods for traffic defined by its associated class map in its configuration mode policy map class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "set nexthop (policy-map-class pbr)",
    "cmd": "set nexthop [recursive] NH-addr_1 [NH-addr_2] ... [NH-addr_n]\nno set nexthop [recursive]\ndefault set nexthop [recursive]",
    "desc": "The set nexthop command specifies the next hop for traffic defined by its associated class map in its configuration mode policy map class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "set nexthop-group (policy-map-class(pbr) Arad)",
    "cmd": "set nexthop-group group_name\nno set nexthop-group group_name\ndefault set nexthop-group group_name",
    "desc": "The set nexthop-group command specifies a nexthop group as the next hop for traffic defined by its associated class map in its configuration mode policy map class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "shape (policy-map-class (control-plane) FM6000)",
    "cmd": "shape pps packets\nno shape\ndefault shape",
    "desc": "The shape command specifies the maximum bandwidth for traffic filtered by the configuration mode policy map class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "shape (policy-map-class (control-plane) Petra)",
    "cmd": "shape kbps kilobits\nno shape\ndefault shape",
    "desc": "The shape command specifies the maximum bandwidth for traffic filtered by the configuration mode policy map class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "show class-map type control-plane",
    "cmd": "show class-map type control-plane [MAP_NAME]",
    "desc": "The show class-map command displays contents of available control-plane class maps."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show class-map type pbr",
    "cmd": "show class-map type pbr [map_name]",
    "desc": "The show class-map command displays contents of all available Policy-Based Routing (PBR) class maps, or of a specified PBR class map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show class-map type qos",
    "cmd": "show class-map type qos [MAP_NAME]",
    "desc": "The show class-mapcommand displays contents of all available QoS class maps."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show policy-map copp",
    "cmd": "show policy-map copp copp-system-policy",
    "desc": "The show policy-map copp command displays contents of the control-plane policy map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show policy-map interface type qos counters",
    "cmd": "show policy-map [INTERFACE_NAME][type qos][TRAFFIC] counters",
    "desc": "The show policy-map interface command displays the quantity of packets that are filtered by ACLs applied to a interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show policy-map interface type qos",
    "cmd": "show policy-map interface INTERFACE_NAME [type qos] [TRAFFIC]",
    "desc": "The show policy-map interface command displays contents of the policy maps applied to specified interfaces or to the control plane."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show policy-map type copp",
    "cmd": "show policy-map type copp copp-system-policy [CMAP_NAME]",
    "desc": "The show policy-map type copp command displays contents of control plane policy maps."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show policy-map type pbr",
    "cmd": "show policy-map type pbr [PMAP_NAME][DATA_LEVEL]",
    "desc": "The show policy-map pbr command displays contents of Policy-Based Routing (PBR) policy maps."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show policy-map type qos counters",
    "cmd": "show policy-map type qos pmap_name [TRAFFIC] counters [INFO_LEVEL]",
    "desc": "The show policy-map counters command displays the quantity of packets that are filtered by the ACLs that comprise a specified QoS policy map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show policy-map type qos",
    "cmd": "show policy-map [type qos][PMAP_NAME [CMAP_NAME]]",
    "desc": "The show policy-map qos command displays contents of QoS policy maps."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show traffic-policy",
    "cmd": "show traffic-policy NAME interface\nshow traffic-policy interface [DETAILS]",
    "desc": "The show traffic-policy command displays traffic policy information on the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "x",
    "cmd": "x",
    "desc": "y z Non-fiber media type, or fiber wavelength PHY encoding Number of WWDM wavelengths or XAUI Lanes C = Copper F = Serial SMF K = Backplane L = Long (1310 nm) S = Short (850 nm) R = LAN PHY (64B/66B) No value = 1 (serial) 4 = 4 WWDM"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Power over Ethernet (PoE)",
    "cmd": "Power over Ethernet (PoE)",
    "desc": "Selected Arista switches provide Power over Ethernet (PoE) to power connected devices."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Show Commands",
    "cmd": "show interface Ethernet15/1 transceiver eeprom",
    "desc": "• show interface transceiver eeprom The show interface transceiver eeprom command displays the parsed capabilities."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "ps/nm",
    "cmd": "ps/nm",
    "desc": "V"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "ps",
    "cmd": "ps",
    "desc": "V"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "ps^2",
    "cmd": "ps^2",
    "desc": "V"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "dB",
    "cmd": "dB",
    "desc": "V"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "krad/s",
    "cmd": "krad/s",
    "desc": "%"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "Show Commands",
    "cmd": "show qos scheduling group G1 Ethernet1",
    "desc": "• QoS configuration on one or more scheduling groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Management Interfaces",
    "cmd": "Management Interfaces",
    "desc": "A management interface is a Layer 3 host port that is typically connected to a management station for performing out-of-band switch management tasks."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "Dynamic Link Flap Damping",
    "cmd": "Dynamic Link Flap Damping",
    "desc": "Overview Dynamic Link Flap Damping detects interfaces with excessive numbers of update messages (flapping) on the network and triggers a damping mechanism temporarily holding the interface’s link in a down state."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Port Groups (QSFP+ and SFP+ Interface Selection)",
    "cmd": "hardware port-group 1 select Et17-20",
    "desc": "Several of Arista’s fixed switches limit the number of 10 Gb/s data lanes in operation through the use of port groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Duplex",
    "cmd": "Duplex",
    "desc": "full full full full full full full full full Speed Type 10G Not Present 10G Not Present 10G Not Present 10G Not Present 10G Not Present 10G Not Present 10G Not Present 10G Not Present 10G Not Present switch>"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Default QSFP Mode Support",
    "cmd": "Default QSFP Mode Support",
    "desc": "A QSFP+ transceiver supports 40GbE and 4x10GbE."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Show Commands",
    "cmd": "Show Commands",
    "desc": "There is no explicit show command to display the default QSFP mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Show Commands",
    "cmd": "show interfaces ethernet 26/1,31/1 phy diag test pattern",
    "desc": "To display the configured and operational test pattern, as well as the test patterns available for an interface, use the show interfaces command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Port Speed Capabilities",
    "cmd": "Port Speed Capabilities",
    "desc": "The Supported Speeds (Gb/s) table shows the various speeds supported on each Arista platform per interface type."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Speed",
    "cmd": "interface Ethernet1",
    "desc": "10G 10G 10G 10G Type Flags dot1q-encapsulation dot1q-encapsulation dot1q-encapsulation dot1q-encapsulation Maximum Latency Tail-drop Thresholds The maximum latency for tail-drop thresholds can be configured in interface configuration mode or in the Q…"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Speed and Duplex",
    "cmd": "Speed and Duplex",
    "desc": "In configuration mode the speed command affects the transmission speed and duplex setting of an interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Flow Control",
    "cmd": "interface ethernet 5",
    "desc": "Flow control is a data transmission option that temporarily stops a device from sending data because of a peer data overflow condition."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Hardware Counter Support",
    "cmd": "Hardware Counter Support",
    "desc": "Hardware counter support enables features requiring programmable hardware counter resources."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Hardware Counter Support Configuration",
    "cmd": "[no] hardware counter feature vlan-interface in",
    "desc": "You can enable hardware counter support on a per-feature basis using the hardware counter feature command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "action",
    "cmd": "no {fcs | symbol} action [linkfault | errdisable | log]\ndefault {fcs | symbol} action [linkfault | errdisable | log]",
    "desc": "The action command configures the link monitoring action that is specified for the link fault signaling event."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "clear counters",
    "cmd": "clear counters [vlan vlanId | tunnel tunnelID][[route][ipv4 | ipv6][vrf]]",
    "desc": "The clear counters command in privileged EXEC mode resets the counters to zero for the specified interfaces including VLAN interfaces, sub-Interfaces, and GRE tunnel interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "clear VXLAN counters",
    "cmd": "clear VXLAN counters [[vni | [vtep [vtep-ip-address | unlearnt]]]",
    "desc": "Use the clear VXLAN counters command to clear the VXLAN encapsulation and decapsulation counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "cfm",
    "cmd": "interface |routing}",
    "desc": "The cfm command places the switch in CFM configuration mode to configure connectivity fault management on a Layer 3 interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "cfm continuity-check",
    "cmd": "continuity-check loc-state action disable interface routing",
    "desc": "The cfm command places the switch in CFM configuration mode to configure connectivity fault management on a Layer 3 interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "cfm domain",
    "cmd": "domain main-domain level 5",
    "desc": "The cfm domain domain-name command places the switch in CFM configuration mode to configure a maintenance domain on a device."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "cfm measurement",
    "cmd": "measurement loss [inband | synthetic]",
    "desc": "The cfm measurement command places the switch in CFM configuration mode to configure Ethernet OAM loss on a device."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "cfm measurement delay",
    "cmd": "measurement delay single-ended tx-interval [10 | 100 | 1000 | 10000 | 60000 |",
    "desc": "The cfm measurement delay command configures Ethernet OAM Delay Measurement on a transmitter switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "cfm measurement loss",
    "cmd": "measurement loss [inband | synthetic] tx-interval [10 | 100 | 1000 | 10000 |",
    "desc": "The cfm measurement loss command configures a switch as an Initiator or Responder for Ethernet OAM Loss Measurement for frame loss on large networks."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "cfm profile",
    "cmd": "profile profile-name alarm indication client level 0-7 tx-interval 1-1 [minutes |seconds]",
    "desc": "The cfm profile command places the switch in CFM configuration mode to configure a CFM profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "extensions vrf",
    "cmd": "extensions vrf all [disable]\nno extensions vrf\ndefault extensions vrf",
    "desc": "The extensions vrf command in the ICMP Error Extensions Configuration Mode enables or disables ICMP error extensions on all VRFs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "feature",
    "cmd": "feature",
    "desc": "The feature command allows the user to reserve the number of TCAM banks for the following features: ACL, flow-spec, IPsec, l2-protocol, PBR, QoS, TCP-MSS-ceiling, and traffic-policy."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "flowcontrol receive",
    "cmd": "flowcontrol receive state\nno flowcontrol receive\ndefault flowcontrol receive",
    "desc": "The flowcontrol receive command configures administrative settings for inbound flow control packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "flowcontrol send",
    "cmd": "flowcontrol send state\nno flowcontrol send\ndefault flowcontrol send",
    "desc": "The flowcontrol send command configures administrative settings for outbound flow control packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "hardware counter feature",
    "cmd": "ipv6 ][ vrf name][ ip-address | ip-address-prefix]][[gre tunnel interface][ in | out]]\nno hardware counter feature [[vlan-interface | subinterface] [ in | out]][vni [encap | decap]][[route [\nipv4 | ipv6 ][ vrf name][ ip-address | ip-address-prefix]][[gre tunnel interface][ in | out]]",
    "desc": "You can enable the hardware counter feature functionality from global configuration mode on a per feature basis."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "hardware counter feature in (DCS-7050x, 7350x, 7300x)",
    "cmd": "hardware counter feature [interface] in\nno hardware counter feature [interface] in",
    "desc": "The hardware counter feature command enables the switch to count the ingress traffic on a Layer 3 port of the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "hardware port-group",
    "cmd": "hardware port-group port_group_id select port_group_mode\nno hardware port-group port_group_id [ select port_group_mode ]\ndefault hardware port-group port_group_id [ select port_group_mode ]",
    "desc": "The hardware port-group command configures a port group to activate either a single interface at a higher speed, such as a QSFP-DD at 400 Gb/s, or multiple interfaces at a lower speed, such as QSFP-56"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "hardware tcam",
    "cmd": "hardware tcam\nno hardware tcam\ndefault hardware tcam",
    "desc": "The hardware tcam command is the top-level global configuration command used to enter the TCAM configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "icmp error extensions",
    "cmd": "icmp error extensions\nno icmp error extensions\ndefault icmp error extensions",
    "desc": "The icmp error extensions command in the Router General Configuration Mode configures global ICMP Error Extensions and determines how VRFs manage ICMP Error Extensions as well as configure specific parameters related to ICMP error messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "icmp error extensions extensions",
    "cmd": "icmp error extensions extensions [disable]\nno icmp error extensions extensions\ndefault icmp error extensions extensions",
    "desc": "The icmp error extensions extensions command in the Router General VRF Configuration Mode enables or disables ICMP Error Extensions for a VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "icmp error extensions ip",
    "cmd": "icmp error extensions [ip | ip6] access-group acl_name\nno icmp error extensions [ip | ip6\ndefault icmp error extensions [ip | ip6]",
    "desc": "The icmp error extensions ip command in the Router General VRF Configuration Mode configures applies an ACL to ICMP error messages to control the generation of extended ICMP error responses on a specific VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "icmp error extensions nodeid",
    "cmd": "icmp error extensions nodeid [interface if_name] [ipv4 address ip_address ] [ipv6\naddress ipv6_address]\nno icmp error extensions nodeid\ndefault icmp error extensions nodeid",
    "desc": "The icmp error extensions nodeid command in the Router General VRF Configuration Mode configures the node identifier used in ICMP error messages to uniquely identify the source node."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "interface ethernet create",
    "cmd": "interface ethernet create sub_range",
    "desc": "The interface ethernet create command is used to configure a range of Ethernet subinterfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "interface ethernet",
    "cmd": "interface ethernet e_range",
    "desc": "The interface ethernet command places the switch in Ethernet-interface configuration mode for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "interface management",
    "cmd": "interface management m_range",
    "desc": "The interface management command places the switch in management-interface configuration mode for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "link-debounce",
    "cmd": "link-debounce time wait_time\nno link-debounce time wait_time\ndefault link-debounce time wait_time",
    "desc": "The link-debounce command configures the link debounce time for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "link-error",
    "cmd": "link-error\nno link-error\ndefault link-error",
    "desc": "The link-error command places the Ethernet Operations, Administration, and Management (EOAM) profile in the EOAM link-error sub-mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "mac-address",
    "cmd": "mac-address address\nno mac-address\ndefault mac-address",
    "desc": "The mac-address command assigns a MAC address to the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor ethernet oam profile",
    "cmd": "monitor ethernet oam profile name\nno monitor ethernet oam profile\ndefault monitor ethernet oam profile",
    "desc": "The monitor ethernet oam profile command applies the EOAM profile to the specific interface in interface configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor ethernet oam",
    "cmd": "monitor ethernet oam\nno monitor ethernet oam\ndefault monitor ethernet oam",
    "desc": "The monitor ethernet oam command places the switch in the Ethernet Operations, Administration, and Management (EOAM) configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "monitor link-flap policy default-profiles",
    "cmd": "monitor link-flap policy [default-profiles | profiles]",
    "desc": "The monitor link-flap policy default-profiles command permits you to enter the link-flap configuration mode and add a list of damping profiles as default profiles for the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "monitor link-flap policy profile damping",
    "cmd": "monitor link-flap profile profile_name damping",
    "desc": "The monitor link-flap policy profile command puts the switch in link-flap configuration mode and allows you to add damping profiles to the configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "nodeid",
    "cmd": "nodeid codepoint class_number\nno nodeid\ndefault nodeid>",
    "desc": "The nodeid command in the ICMP Error Extensions Configuration Mode configures the Class Number for the Node Identification Object."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "params",
    "cmd": "params include hostname\nno params\ndefault params",
    "desc": "The params command in the ICMP Error Extensions Configuration Mode configures ICMP error parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "penalty mac fault",
    "cmd": "penalty mac fault [local | remote] penalty_value",
    "desc": "The penalty mac fault parameter permits configuration of the Damping policy MAC fault changes after entering the Link-Flap Damping Profile Configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "penalty threshold",
    "cmd": "penalty threshold [maximum | reuse | suppression] penalty_value",
    "desc": "The penalty threshold parameter permits the configuration of the link-flap damping threshold for the penalty after entering the link-flap damping profile configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "period",
    "cmd": "no {fcs | symbol} period num {seconds | frames}\ndefault {fcs | symbol} period num {seconds | frames}",
    "desc": "The period command configures the link monitoring period for a link error in terms of number of frames or seconds."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "phy link detection aggressive",
    "cmd": "phy link detection aggressive\nno phy link detection aggressive\ndefault phy link detection aggressive",
    "desc": "The phy link detection aggressive command allows the configuration of interfaces for aggressive link-up declaration (~50 ms) on those interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "poe disabled",
    "cmd": "poe disabled\nno poe disabled\ndefault poe disabled",
    "desc": "Power over Ethernet (PoE) is enabled on all Ethernet ports by default on switches that support PoE."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "poe legacy detect",
    "cmd": "poe legacy detect\nno poe legacy detect\ndefault poe legacy detect",
    "desc": "IEEE-compliant Powered Devices (PDs) are recognized by a specific resistance signature to a test signal sent by the switch, but non-compliant (legacy or proprietary) PDs may use a capacitive signature instead."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "poe limit",
    "cmd": "poe limit {class class_num | watt_num watts}\nno poe limit\ndefault poe limit",
    "desc": "Power over Ethernet (PoE) power output is limited by the hardware-negotiated power level and by the total power capacity of the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "power budget",
    "cmd": "power budget [n] watts\nno power budget",
    "desc": "Power over Ethernet (PoE) budget is not set on all Ethernet ports by default on switches that support PoE."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "power budget exceed action (warning | hold-down)",
    "cmd": "power budget exceed action hold-down\nno power budget",
    "desc": "When the Power over Ethernet (PoE) ports exceeds the budgeted amount, the switch issues a warning and continues to provide additional power above the budgeted limit."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "profile",
    "cmd": "profile profileName copy [SOURCE_PROFILE_NAME]\nno profile PROFILE_NAME",
    "desc": "The profile command is used within the TCAM configuration mode to create a new, user-defined TCAM profile and enter its specific configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "qos scheduling",
    "cmd": "qos scheduling\nno qos scheduling",
    "desc": "The qos scheduling command places the switch in the QoS scheduling mode under which the scheduling groups and scheduling policies are configured for shared shaper across multiple subinterfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "recovery-time",
    "cmd": "recovery-time value\nno recovery-time value\ndefault recovery-time value",
    "desc": "The recovery-time command configures the recovery timeout value for link fault signaling."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "refresh traffic-policy field-set",
    "cmd": "refresh traffic-policy field-set [all | integer | ipv4 | ipv6 | l4-port | mac",
    "desc": "The refresh traffic-policy field-set provides the ability to refresh a field set for a traffic policy."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show cfm continuity-check end-point",
    "cmd": "show cfm continuity-check end-point [remote-defect | counters] [domain domain_name]",
    "desc": "The show cfm continuity-check command displays continuity and connectivity information for a CFM configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show cfm endpoint",
    "cmd": "show cfm end-point [domain domain_name][association association_ID][ end-point end_point_id]]]",
    "desc": "The show cfm command displays information about a CFM configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show cfm measurement delay proactive",
    "cmd": "show cfm measurement delay proactive [details]",
    "desc": "The show cfm measurement delay proactive command displays statistical information about the Ethernet OAM Delay Measurement configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show cfm measurement loss proactive",
    "cmd": "show cfm measurement loss [inband | synthetic] proactive [details]",
    "desc": "The show cfm measurement loss proactive command displays statistical information about the Ethernet OAM Loss Measurement configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show hardware counter",
    "cmd": "show hardware counter",
    "desc": "The show hardware counter command displays counter events across time intervals."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show hardware port-group",
    "cmd": "show hardware port-group",
    "desc": "The show hardware port-group command displays the status of DCS-7050Q-16 port-groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show hardware system forwarding-chips",
    "cmd": "show hardware system forwarding-chips",
    "desc": "The command show hardware system forwarding-chips displays information about the forwarding chips on your switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show icmp error extensions",
    "cmd": "show icmp error extensions [vrf vrf_name]",
    "desc": "The show icmp error extensions command displays information about the ICMP Error Extensions configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interface counters",
    "cmd": "show interface counters [ | MODIFIER ]",
    "desc": "The show interface counters command is a fundamental operational command that displays a tabular summary of the most important traffic statistics for all interfaces on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces counters ip",
    "cmd": "show interfaces counters ip",
    "desc": "Use the show interfaces counters ip command to display IPv4, IPv6 packets, and octets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces counters bins",
    "cmd": "show interfaces [interface] counters bins",
    "desc": "The show interfaces counters bins command displays packet counters, categorized by packet length, for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces counters errors",
    "cmd": "show interfaces [interface] counters errors",
    "desc": "The show interfaces counters errors command displays the error counters for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show interfaces counters queue",
    "cmd": "show interfaces [interface] counters queue",
    "desc": "The show interfaces counters queue command displays the queue drop counters for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces counters rates",
    "cmd": "show interfaces [interface] counters rates",
    "desc": "The show interfaces counters rates command displays the received and transmitted packet rate counters for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces counters",
    "cmd": "show interfaces [interface] counters [incoming]",
    "desc": "The show interface counters command displays the Layer 3 ingress traffic count information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces flow-control",
    "cmd": "show [interface] flow-control",
    "desc": "The show interfaces flow-control command displays administrative and operational flow-control data for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces hardware default",
    "cmd": "show interfaces [interface] hardware default",
    "desc": "The show interfaces hardware default command displays the static interface capability information of the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces hardware",
    "cmd": "show interfaces [interface] hardware",
    "desc": "The show interfaces hardware command displays the model number, interface type, duplex mode, and flow-control settings of the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces interactions",
    "cmd": "show interfaces [intf] interactions",
    "desc": "The show interfaces interactions command aims to provide users with a resource that explains various relationships between Ethernet interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "show interface link-flap damping",
    "cmd": "show interface link-flap damping",
    "desc": "The show interface link-flap damping command displays information about the configured dynamic link flap damping parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces negotiation",
    "cmd": "show interfaces [interface] negotiation [info_level]",
    "desc": "The show interfaces negotiation command displays the speed, duplex, and flow control autonegotiation status for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces phy",
    "cmd": "show interfaces [interface] phy [inf_level]",
    "desc": "The show interfaces phy command displays physical layer characteristics for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces status errdisabled",
    "cmd": "show interfaces [interface] status errdisabled",
    "desc": "The show interfaces status errdisabled command displays interfaces that are in errdisabled state, including their link status and errdisable cause."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces status",
    "cmd": "show interfaces [interface] status [status_type]",
    "desc": "The show interfaces status command displays the interface name, link status, vlan, duplex, speed, and type of the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "show interface transceiver dom",
    "cmd": "show interface Ethernet11/1 transceiver dom",
    "desc": "The show interface intf transceiver dom command displays the most important current performance data on the media (line) side."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces transceiver channels",
    "cmd": "show interfaces [interface e_range] transceiver channels",
    "desc": "The show interfaces transceiver channels command displays the current wavelength/frequency settings for the specified channels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces transceiver hardware",
    "cmd": "show interfaces [interface] ethernet e_range transceiver hardware",
    "desc": "The show interfaces transceiver hardware command displays the current wavelength/frequency settings for the specified transceiver interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces transceiver properties",
    "cmd": "show interfaces [interface] transceiver properties",
    "desc": "The show interfaces transceiver properties command displays configuration information for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces transceiver",
    "cmd": "show interfaces [interface] transceiver [data_format]",
    "desc": "The show interfaces transceiver command displays the operational transceiver data for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor ethernet oam profile",
    "cmd": "show monitor ethernet oam profile [name | summary]",
    "desc": "The show monitor ethernet oam profile command displays configuration information for the specified ethernet OAM profile name or the summary information of all configured profile names."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform fm6000 agileport map",
    "cmd": "show platform fm6000 agileport map",
    "desc": "The show platform fm6000 agileport map command displays the list of Ethernet interfaces that are combinable to form a higher-speed port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform trident flexcounters",
    "cmd": "show platform trident flexcounters [vni [egress summary | ingress summary]]|[[vtep [decap\nsummary | encap summary]]",
    "desc": "The show platform trident flexcounters command displays the L3 interfaces when the corresponding hardware counter feature is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform trident flexcounters l3intf",
    "cmd": "show platform trident flexcounters l3intf [[in | out] [summary | values]]",
    "desc": "Use the show platform trident flexcounters l3intf command to display the subinterface, SVI, and GRE tunnel interface features."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show poe",
    "cmd": "show poe [interface]",
    "desc": "The show poe command displays PoE information for a specified port range or for all ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show qos scheduling",
    "cmd": "show qos scheduling Options",
    "desc": "The show qos scheduling command displays the QoS configuration on one or more scheduling groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show route counters",
    "cmd": "show route [ipv4 | ipv6]",
    "desc": "Use the show route [ipv4 | ipv6] counters to display the IPv4 or IPv6 pack and byte counts."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "show transceiver status interface",
    "cmd": "show transceiver status interface Ethernet14/1",
    "desc": "The show transceiver status interface [interface_name] command displays the most important alarms, faults, and interface status."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show VXLAN counters vni",
    "cmd": "show VXLAN counters vni [encap | decap]",
    "desc": "Use the show VXLAN counters vni command to display the encapsulation and decapsulation counters at the VNI."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "speed",
    "cmd": "speed mode\nno speed\ndefault speed",
    "desc": "The speed command configures the transmission speed and duplex settings for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Vlan",
    "cmd": "switchport isolated\nno switchport isolated",
    "desc": "routed routed routed inactive Duplex full full full full Speed Type 10G 40GBASE-SR4 10G 40GBASE-SR4 10G 40GBASE-SR4 10G 40GBASE-SR4 switchport isolated The switchport isolated command in Interface Configuration Mode configures ports on interfaces as"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "system",
    "cmd": "system profile name",
    "desc": "The system command allows the user to configure the system-wide TCAM profiles: default, mirroring-acl, mpls-evpn, pbr-match-nexthop-group, qos, tap-aggregation-default, tap-aggregation-extended, tc-counters,"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "threshold",
    "cmd": "no [fcs | symbol] threshold threshold_value\ndefault [fcs | symbol] threshold threshold_value",
    "desc": "The threshold command configures the link monitoring threshold value that is specified for a link error."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "traffic-policies field-set",
    "cmd": "traffic-policies field-set [integer | ipv4 | ipv6 | l4-ports | mac | vlan][prefix field_set_name |",
    "desc": "The traffic-policies field-set creates field sets of prefixes, ports, or VLAN IDs to load from a location set by a URL."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "transceiver channel",
    "cmd": "transceiver channel channel_number grid-spacing spacing_grid\nno transceiver channel channel_number grid-spacing spacing_grid\ndefault transceiver channel channel_number grid-spacing spacing_grid",
    "desc": "The transceiver channel command sets the transceiver wavelength/frequency by channel number."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "transceiver qsfp default-mode",
    "cmd": "transceiver qsfp default-mode 4x10G\nno transceiver qsfp default-mode\ndefault transceiver qsfp default-mode\nbe modified or removed in the current release.",
    "desc": "The transceiver qsfp default-mode command specifies the transmission mode of all QSFP transceiver modules that are not explicitly configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Port Channels and LACP",
    "cmd": "Port Channels and LACP",
    "desc": "This chapter describes channel groups, port channels, port channel interfaces, and the Link Aggregation Control Protocol (LACP)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Port Channel Introduction",
    "cmd": "Port Channel Introduction",
    "desc": "Arista’s switching platforms support industry-standard link aggregation protocols."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Port Channel Conceptual Overview",
    "cmd": "Port Channel Conceptual Overview",
    "desc": "/ 30.0 (Gbps)"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Channel Groups and Port Channels",
    "cmd": "Channel Groups and Port Channels",
    "desc": "A port channel is a communication link between two switches supported by matching channel group interfaces on each switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Port Channel Subinterfaces",
    "cmd": "Port Channel Subinterfaces",
    "desc": "Port channel subinterfaces divide a single port channel interface into multiple logical L3 interfaces based on the 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Port Channel Mirroring",
    "cmd": "Port Channel Mirroring",
    "desc": "EOS supports Port Channels as mirroring destinations for both ingress and egress source directions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Port Channel Configuration Procedures",
    "cmd": "Port Channel Configuration Procedures",
    "desc": "These sections describe channel group and port channel configuration procedures: • Configuring a Channel Group • Configuring a Port Channel Interface • Configuring Port Channel Mirroring • Maximum Port Channel ID Increase"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Dynamic and Symmetric LAG Hashing",
    "cmd": "load-balance policies",
    "desc": "Dynamic LAG hashing enables high link utilization and highly even distribution among LAG members by employing a randomized hashing algorithm."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Default Load Balance Profile",
    "cmd": "port-channel load-balance fm6000 fields ip ip-tcp-udp-header",
    "desc": "Two commands configure the load balance default profile on 7150 Series switches: • port-channel load-balance fm6000 fields ip controls the hash algorithm for IP packets by specifying the algorithm’s use of IP and MAC header fields."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Port Channel and LACP Configuration Commands",
    "cmd": "Port Channel and LACP Configuration Commands",
    "desc": "Global Port Channel and LACP Configuration Commands • interface port-channel • lacp system-priority Interface Configuration Commands – Ethernet Interface • channel-group • lacp port-priority • lacp timer"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "channel-group",
    "cmd": "channel-group number mode group_mode\nno channel-group\ndefault channel-group",
    "desc": "The channel-group command assigns the configuration mode Ethernet interfaces to a channel group, creates the group if it does not already exist, and sets the port-channel mode for the group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "distribution random",
    "cmd": "distribution random BALANCE_TYPE\nno distribution random\ndefault distribution random",
    "desc": "The distribution random command specifies the random distribution of data packets handled by the hash algorithm defined by the configuration mode load balance profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "distribution symmetric-hash",
    "cmd": "distribution symmetric-hash FIELD_TYPE\nno distribution symmetric-hash\ndefault distribution symmetric-hash",
    "desc": "The distribution symmetric-hash command enforces traffic symmetry on data distributed by the hash algorithm defined by the configuration mode load balance profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "fields ip",
    "cmd": "fields ip IP_FIELD\nno fields ip\ndefault fields ip",
    "desc": "The fields ip command specifies the L3/L4 data fields used by the hash algorithm defined by the configuration mode load balance profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "fields mac",
    "cmd": "fields mac MAC_FIELD\nno fields mac\ndefault fields mac",
    "desc": "The fields mac command specifies the L2 data fields used by the hash algorithm defined by the configuration mode load balance profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "hash-seed",
    "cmd": "hash-seed number\nno hash-seed number\ndefault hash-seed number",
    "desc": "The hash-seed command specifies the seed used by the hash algorithm defined by the configuration mode load balance profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "ingress load-balance profile",
    "cmd": "ingress load-balance profile profile_name\nno ingress load-balance profile\ndefault ingress load-balance profile",
    "desc": "The ingress load-balance profile command applies the specified load-balance profile to the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "interface port-channel",
    "cmd": "interface port-channel p_range\nno interface port-channel p_range\ndefault interface port-channel p_range",
    "desc": "The interface port-channel command places the switch in port-channel interface configuration mode for modifying parameters of specified link aggregation (LAG) interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "lacp port-priority",
    "cmd": "lacp port-priority priority_value\nno lacp port-priority\ndefault lacp port-priority",
    "desc": "The lacp port-priority command sets the aggregating port priority for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "lacp system-priority",
    "cmd": "lacp system-priority priority_value\nno lacp system-priority\ndefault lacp system-priority",
    "desc": "The lacp system-priority command configures the switch’s LACP system priority."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "lacp timer",
    "cmd": "lacp timer RATE_LEVEL\nno lacp timer\ndefault lacp timer",
    "desc": "The lacp timer command configures the LACP reception interval on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "load-balance fm6000 profile",
    "cmd": "load-balance fm6000 profile profile_name\nno load-balance fm6000 profile profile_name\ndefault load-balance fm6000 profile profile_name",
    "desc": "The load-balance fm6000 profile command places the switch in load-balance-profile configuration mode to configure a specified load balance profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "load-balance sand profile (7500E/7500R)",
    "cmd": "load-balance sand profile profile_name\nno load-balance sand profile profile_name",
    "desc": "The load-balance sand profile command configures a load-balance profile on a sand module switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "monitor session destination",
    "cmd": "monitor session session_name destination Port-Channel interface_number",
    "desc": "The monitor session destination configures Port Channel interfaces as a mirroring destination for both ingress and egress traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor session source",
    "cmd": "monitor session session_name source interface_number",
    "desc": "The monitor session source configures Port Channel interfaces as a mirroring source for both ingress and egress traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel hash-seed",
    "cmd": "port-channel hash-seed number\nno port-channel hash-seed\ndefault port-channel hash-seed",
    "desc": "The port-channel hash-seed command specifies the seed used by the hash algorithm defined by the configuration mode load balance profile when distributing the load across ports comprising a port channel."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel lacp fallback",
    "cmd": "port-channel lacp fallback [MODE]\nno port-channel lacp fallback\ndefault port-channel lacp fallback",
    "desc": "The port-channel lacp fallback command enables the LACP fallback mode on the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel lacp fallback timeout",
    "cmd": "port-channel lacp fallback timeout period\nno port-channel lacp fallback timeout\ndefault port-channel lacp fallback timeout",
    "desc": "The port-channel lacp fallback timeout command specifies the fallback timeout period for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel load-balance",
    "cmd": "port-channel load-balance platform { hash_seed | fields ip fields | hash hash_function }\nno port-channel load-balance platform [ hash_seed ]\ndefault port-channel load-balance platform [ hash_seed ]",
    "desc": "The port-channel load-balance command specifies the seed in the hashing algorithm that balances the load across ports comprising a port channel."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel load-balance arad fields ip",
    "cmd": "port-channel load-balance arad fields ip IP_FIELD_NAME\nno port-channel load-balance arad fields ip\ndefault port-channel load-balance arad fields ip",
    "desc": "The port-channel load-balance arad fields ip command specifies the data fields that the port channel load balance hash algorithm uses for distributing IP packets on Arad platform switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel load-balance fm6000 fields ip",
    "cmd": "port-channel load-balance fm6000 fields ip IP_FIELD_NAME\nno port-channel load-balance fm6000 fields ip\ndefault port-channel load-balance fm6000 fields ip",
    "desc": "The port-channel load-balance fm6000 fields ip command specifies the data fields that the port channel load balance hash algorithm uses for distributing IP packets on FM6000 platform switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel load-balance fm6000 fields mac",
    "cmd": "port-channel load-balance fm6000 fields mac MAC_FIELD_NAME\nno port-channel load-balance fm6000 fields mac\ndefault port-channel load-balance fm6000 fields mac",
    "desc": "The port-channel load-balance fm6000 fields mac command specifies data fields that configure the port channel load balance hash algorithm for non-IP packets on FM6000 platform switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel load-balance module",
    "cmd": "port-channel load-balance module LINECARD_RANGE sand profile PROFILE_NAME\nno port-channel load-balance module LINECARD_RANGE sand profile PROFILE_NAME\ndefault port-channel load-balance module LINECARD_RANGE sand profile PROFILE_NAME",
    "desc": "The port-channel load-balance module command assigns a named load-balancing profile to a linecard."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel load-balance petraA fields ip",
    "cmd": "port-channel load-balance petraA fields ip IP_FIELD_NAME\nno port-channel load-balance petraA fields ip\ndefault port-channel load-balance petraA fields ip",
    "desc": "The port-channel load-balance petraA fields ip command specifies the data fields that the port channel load balance hash algorithm uses for distributing IP packets on Petra platform switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel load-balance sand profile (7500E/7500R)",
    "cmd": "port-channel load-balance sand profile profile_name\nno port-channel load-balance sand profile profile_name",
    "desc": "The port-channel load-balance sand profile command configures a global LAG hashing profile on the port channel interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel load-balance trident fields ip",
    "cmd": "port-channel load-balance trident fields ip IP_FIELD_NAME\nno port-channel load-balance trident fields ip\ndefault port-channel load-balance trident fields ip\ndefault port-channel load-balance trident fields ip ingress-interface disabled",
    "desc": "The port-channel load-balance trident fields ip command specifies the data fields that the port channel load balance hash algorithm uses for distributing IP packets on Trident platform switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel load-balance trident fields ipv6",
    "cmd": "port-channel load-balance trident fields ipv6 IP_FIELD_NAME\nno port-channel load-balance trident fields ipv6\ndefault port-channel load-balance trident fields ipv6",
    "desc": "The port-channel load-balance trident fields ipv6 command specifies the data fields that the port channel load balance hash algorithm uses for distributing IPv6 packets on Trident platform switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel load-balance trident fields mac",
    "cmd": "port-channel load-balance trident fields mac MAC_FIELD_NAME\nno port-channel load-balance trident fields mac\ndefault port-channel load-balance trident fields mac\ndefault port-channel load-balance trident fields mac ingress-interface disabled",
    "desc": "The port-channel load-balance trident fields mac command specifies data fields that the port channel load balance hash algorithm uses for distributing non-IP packets on Trident platform switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel min-links",
    "cmd": "port-channel min-links quantity\nno port-channel min-links\ndefault port-channel min-links",
    "desc": "The port-channel min-links command specifies the minimum number of interfaces that the configuration mode LAG requires to become active."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel min-links review interval",
    "cmd": "port-channel min-links review interval timeout (seconds)\nno port-channel min-links review interval\ndefault port-channel min-links review interval\nsetting the review interval to zero, the command has the following effect:\ninterfaces ready to join the port-channel. Meanwhile, the partner can enable the port-channel link with\nfewer than required member interfaces. This configuration does not impact port-channels without minlinks configuration.",
    "desc": "The port-channel min-links review interval command enables or disables timer based minlinks review feature for all port-channels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel speed mixed",
    "cmd": "port-channel speed mixed",
    "desc": "The port-channel speed mixed command configures a port channel with the ability to have active members of multiple speeds."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "port-channel speed minimum",
    "cmd": "port-channel speed minimum speed-value",
    "desc": "The port-channel speed minimum command specifies the cumulative minimum speed of all active members in order for a port channel to become active."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show lacp aggregates",
    "cmd": "show lacp [PORT_LIST] aggregates [PORT_LEVEL] [INFO_LEVEL]",
    "desc": "The show lacp aggregates command displays aggregate IDs and the list of bundled ports for all specified port channels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show lacp counters",
    "cmd": "show lacp [PORT_LIST] counters [PORT_LEVEL] [INFO_LEVEL]\nthe command.",
    "desc": "The show lacp counters command displays LACP traffic statistics."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show lacp interface",
    "cmd": "show lacp interface [INTERFACE_PORT] [PORT_LEVEL] [INFO_LEVEL]",
    "desc": "The show lacp interface command displays port status for all port channels that include the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show lacp internal",
    "cmd": "show lacp [PORT_LIST] internal [PORT_LEVEL] [INFO_LEVEL]",
    "desc": "The show lacp internal command displays the local LACP state for all specified channels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show lacp peer",
    "cmd": "show lacp [PORT_LIST] peer [PORT_LEVEL] [INFO_LEVEL]",
    "desc": "The show lacp peer command displays the LACP protocol state of the remote neighbor for all specified port channels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show lacp sys-id",
    "cmd": "show lacp sys-id [INFO_LEVEL]",
    "desc": "The show lacp sys-id command displays the System Identifier the switch uses when negotiating remote LACP implementations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "representation: 8000,00-1c-73-04-36-d7",
    "cmd": "representation: 8000,00-1c-73-04-36-d7",
    "desc": "Conditional UDP Payload Hashing"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show load-balance profile",
    "cmd": "show load-balance profile [PROFILES]",
    "desc": "The show load-balance profile command displays the contents of the specified load balance profiles."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show port-channel",
    "cmd": "show port-channel [MEMBERS] [PORT_LIST] [INFO_LEVEL]",
    "desc": "The show port-channel command displays information about members the specified port channels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show port-channel dense",
    "cmd": "show port-channel dense",
    "desc": "The show port-channel dense command displays the port-channels on the switch and lists their component interfaces, LACP status, and set flags."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show port-channel limits",
    "cmd": "show port-channel limits",
    "desc": "The show port-channel limits command displays groups of ports that are compatible and may be joined into port channels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show port-channel load-balance fields",
    "cmd": "show port-channel load-balance HARDWARE fields",
    "desc": "The show port-channel load-balance fields command displays the fields that the hashing algorithm uses to distribute traffic across the interfaces that comprise the port channels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show port-channel load-balance",
    "cmd": "show port-channel load-balance [MEMBERS]",
    "desc": "The show port-channel load-balance command displays the traffic distribution between the member ports of the specified port channels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "MLAG Introduction",
    "cmd": "MLAG Introduction",
    "desc": "High availability data center topologies typically provide redundancy protection at the expense of oversubscription by connecting Top-Of-Rack (TOR) switches and servers to dual aggregation switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "MLAG Conceptual Overview",
    "cmd": "MLAG Conceptual Overview",
    "desc": "Multi-Chassis Link Aggregation"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "MLAG Operation Process",
    "cmd": "MLAG Operation Process",
    "desc": "A Multi-chassis Link Aggregation Group (MLAG) is a pair of links that terminate on two cooperating switches and appear as an ordinary Link Aggregation Group (LAG)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "MLAG Interoperability with Other Features",
    "cmd": "MLAG Interoperability with Other Features",
    "desc": "The following sections describe MLAG interaction with other switch features."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "LACP",
    "cmd": "LACP",
    "desc": "Link Aggregation Control Protocol (LACP) should be used on all MLAG interfaces, including the peer-link."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Static MAC Addresses",
    "cmd": "Static MAC Addresses",
    "desc": "A static MAC address configured on an MLAG interface is automatically configured on the peer’s corresponding interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Spanning Tree Protocol (STP)",
    "cmd": "Spanning Tree Protocol (STP)",
    "desc": "When implementing MLAG in a spanning tree network, spanning tree must be configured globally and on port-channels configured with an MLAG ID."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Port Mirroring",
    "cmd": "Port Mirroring",
    "desc": "A port channel which is a member of an MLAG must not be used as the destination port for a port mirroring (port monitoring) session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "IPv6 Flow Label Hashing",
    "cmd": "IPv6 Flow Label Hashing",
    "desc": "Arista switches use the hashing algorithm to load-balance traffic among LAG members and Layer 3 ECMP (equal cost multipath) paths."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "MLAG Maintenance",
    "cmd": "MLAG Maintenance",
    "desc": "These sections describe tasks required for MLAG to operate on the switch: • Ensuring Control Plane ACL Compatibility • MLAG Availability through a Single Functional Peer • Upgrading MLAG Peers • Forced Periodic ARP and NDP Refresh on IPv4 and IPv6 Ne…"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "MLAG Availability through a Single Functional Peer",
    "cmd": "MLAG Availability through a Single Functional Peer",
    "desc": "MLAG high availability advantages are fully realized when all devices that connect to one MLAG switch also connect to the peer switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Reload Delay",
    "cmd": "Reload Delay",
    "desc": "If an MLAG peer reboots, all ports except those in the peer-link port-channel remain in errdisabled state for a specified time, called the reload-delay period."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "MLAG Configuration Mode",
    "cmd": "mlag configuration",
    "desc": "Peer connection parameters are configured in MLAG-configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Peer Address",
    "cmd": "peer-address 10.0.0.2",
    "desc": "The peer address is the destination address on the peer switch for MLAG control traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Peer Link",
    "cmd": "peer-link port-channel 10",
    "desc": "An MLAG is formed by connecting two switches through an interface called a peer link."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Reload Delay Period",
    "cmd": "reload-delay 150",
    "desc": "The reload delay period specifies the interval that non-peer links are disabled after an MLAG peer reboots."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Shutdown",
    "cmd": "shutdown",
    "desc": "The shutdown (MLAG) command disables MLAG operations without disrupting the MLAG configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN - MLAG Single-homed Hosts",
    "cmd": "EVPN - MLAG Single-homed Hosts",
    "desc": "Add a local VTEP to each MLAG peer for the control plane to advertise singly connected hosts directly behind a specific local VTEP-MLAG peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "MLAG Implementation Example",
    "cmd": "MLAG Implementation Example",
    "desc": "This example creates an MLAG Domain, then configures MLAG connections between the peer switches and four Network Attached Devices (NADs)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show mlag interfaces states",
    "cmd": "show mlag interfaces [MLAGS] states [ STATE_NAMES][INFO_LEVEL]",
    "desc": "The show mlag interfaces states command displays information about the Multi-chassis Link AGgregation (MLAG) states on bridged Ethernet interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show mlag interfaces",
    "cmd": "show mlag interfaces [MLAGS][INFO_LEVEL]",
    "desc": "The show mlag interfaces command displays information about the Multi-chassis Link AGgregation (MLAG) configuration on bridged Ethernet interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show mlag issu warnings",
    "cmd": "show mlag issu warnings",
    "desc": "The show mlag issu warnings command displays a warning message regarding the backwardcompatibility of this feature before you upgrade."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show mlag subinterfaces",
    "cmd": "show mlag subinterfaces",
    "desc": "The show mlag subinterfaces command displays information about MLAG Layer 2 subinterfaces configured on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "sec Max Age 20 sec Forward Delay 15 sec",
    "cmd": "sec Max Age 20 sec Forward Delay 15 sec",
    "desc": "Interface Role State Cost Prio."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "po.ra.ar.mg.172.17.254.64/29",
    "cmd": "po.ra.ar.mg.172.17.254.64/29",
    "desc": "active MLAG Commands Global MLAG Commands • mlag configuration (global configuration) MLAG Interface Configuration Commands • mlag (port-channel interface configuration) MLAG Configuration Commands • arp aging refresh always"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "arp aging refresh always",
    "cmd": "arp aging refresh always\nno arp aging refresh always\ndefault arp aging refresh always",
    "desc": "The arp aging refresh always command enables the switch to send forced periodic ARP requests for an MLAG configuration in an IPv4 network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "domain-id",
    "cmd": "domain-id identifier\nno domain-id\ndefault domain-id",
    "desc": "The domain-id command specifies a name for the Multi-chassis Link AGgregation (MLAG) domain."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "dual-primary detection delay",
    "cmd": "dual-primary detection delay seconds [action erridisable all-interfaces]\nno dual-primary detection delay seconds [action erridisable all-interfaces]\ndefault dual-primary detection delay seconds [action erridisable all-interfaces]",
    "desc": "Use the dual-primary detection delay command to configure a dual primary detection delay with an optional action to errdisable all interfaces on secondary MLAG peer after a dual primary condition is detected."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "dual-primary recovery delay",
    "cmd": "dual-primary recovery delay mlag seconds non-mlag seconds\nno dual-primary recovery delay mlag seconds non-mlag seconds\ndefault dual-primary recovery delay mlag seconds non-mlag seconds",
    "desc": "Use the dual-primary recovery delay command to configure dual-primary detection recovery-delay for MLAG interfaces and non-MLAG interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "heartbeat-interval (MLAG)",
    "cmd": "heartbeat-interval period\nno heartbeat-interval\ndefault heartbeat-interval",
    "desc": "The heartbeat-interval command configures the interval at which heartbeat messages are issued in a Multi-chassis Link AGgregation (MLAG) configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "inactive forwarding peer-link restricted",
    "cmd": "inactive forwarding peer-link restricted [disabled]\nno inactive forwarding peer-link restricted [disabled]\ndefault inactive forwarding peer-link restricted [disabled]",
    "desc": "The inactive forwarding peer-link restricted command is used in MLAG configurations to limit traffic forwarding on the MLAG peer-link when the switch is not in a primary or secondary state."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "inactive mac-address destination peer-link",
    "cmd": "inactive mac-address destination peer-link [direct | indirect]",
    "desc": "The inactive mac-address destination peer-link remaps all MAC addresses and host routes to the other MLAG peer in the MLAG domain."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "ipv6 nd cache refresh always",
    "cmd": "ipv6 nd cache refresh always\nno ipv6 nd cache refresh always\ndefault ipv6 nd cache refresh always",
    "desc": "The ipv6 nd cache refresh always command enables the switch to send forced periodic ARP requests for an MLAG configuration in an IPv6 network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "local-interface",
    "cmd": "local-interface vlan vlan_number\nno local-interface\ndefault local-interface",
    "desc": "The local-interface command assigns a VLAN interface for use in Multi-chassis Link AGgregation (MLAG) configurations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "mlag (port-channel interface configuration)",
    "cmd": "mlag number\nno mlag\ndefault mlag",
    "desc": "The mlag command assigns an MLAG ID to a port-channel."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "peer-address",
    "cmd": "peer-address ipv4_addr\nno peer-address\ndefault peer-address",
    "desc": "The peer-address command specifies the peer IPv4 address for a Multi-chassis Link AGgregation (MLAG) domain."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "peer-address heartbeat",
    "cmd": "peer-address heartbeat [Peer-IPv4 | Peer-IPv6] [vrf vrf_name]\nno peer-address heartbeat [Peer-IPv4 | Peer-IPv6] [vrf vrf_name]\ndefault peer-address heartbeat [Peer-IPv4 | Peer-IPv6] [vrf vrf_name]",
    "desc": "The peer-address heartbeat command causes the MLAG agent to start using Peer-IP address in the given VRF for UDP-based heartbeat control messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "peer-link",
    "cmd": "peer-link INT_NAME\nno peer-link\ndefault peer-link",
    "desc": "The peer-link command specifies the interface that connects Multi-chassis Link AGgregation (MLAG) peers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "reload-delay mlag",
    "cmd": "reload-delay [mlag] PERIOD\nno reload-delay [mlag]\ndefault reload-delay [mlag]",
    "desc": "The reload-delay mlag command configures the reload delay period for MLAG links."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "reload-delay mode",
    "cmd": "reload-delay mode lacp standby\nno reload-delay mode\ndefault reload-delay mode",
    "desc": "The reload-delay mode command specifies the state of LACP LAG ports during the MLAG reload delay period."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "reload-delay non-mlag",
    "cmd": "reload-delay non-mlag PERIOD\nno reload-delay non-mlag\ndefault reload-delay non-mlag",
    "desc": "The reload-delay non-mlag command specifies the period that non-MLAG links are disabled after an MLAG peer reboots."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show mlag",
    "cmd": "show mlag [INFO_LEVEL]",
    "desc": "The show mlag command displays information about the Multi-chassis Link AGgregation (MLAG) configuration on bridged Ethernet interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "ar.mg.mlag",
    "cmd": "ar.mg.mlag",
    "desc": "Vlan3901"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Static Routing",
    "cmd": "Static Routing",
    "desc": "Static routes are entered through the CLI and are typically used when dynamic protocols are unable to establish routes to a specified destination prefix."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Dynamic Routing",
    "cmd": "Dynamic Routing",
    "desc": "Dynamic routes are established by dynamic routing protocols."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Static MAC Address Table Entries",
    "cmd": "mac address-table static 0012.3694.03ec vlan 3 interface Ethernet",
    "desc": "The MAC address table accepts static MAC addresses, including multicast entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "STATIC",
    "cmd": "STATIC",
    "desc": "Po10 Po12 Total Mac Addresses for this criterion: 1 switch(config)# Configuring a Delay for Flushing MAC Addresses Configure a delay for flushing MAC addresses when the network interface goes down and reduce"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Dynamic MAC Address Table Entries",
    "cmd": "interface ethernet 8",
    "desc": "Learning Mode The switch maintains a MAC address table for switching frames efficiently between VLAN ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "MAC Address Learning Configuration",
    "cmd": "vlan 10",
    "desc": "The mac address learning command enables MAC address learning on a VLAN interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Port Mirroring Capacity",
    "cmd": "Port Mirroring Capacity",
    "desc": "Port mirroring capacity varies by platform."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "MAC Security",
    "cmd": "interface ethernet 7",
    "desc": "MAC security restricts input to a switched port by limiting the number of MAC addresses that can access the port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Interface Link Flap Monitor",
    "cmd": "monitor link-flap policy",
    "desc": "An interface is monitored for link flap errors with link flap profiles."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "ad:3e:5f:dd:64:cf",
    "cmd": "ad:3e:5f:dd:64:cf",
    "desc": "Displaying RAIL Status"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Interface",
    "cmd": "Interface",
    "desc": "-------------Ethernet17 Ethernet23 Port-Channel6 Port-Channel5 Ethernet1 State Last Failed --------- ----------inactive 7 days, 12:47:48 ago down 0:06:14 ago up 4:38:01 ago proxying 0:10:31 ago up never switch>"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor session",
    "cmd": "show monitor session SESSION_NAME",
    "desc": "The show monitor session command displays the configuration of the specified port mirroring session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform trident mirroring",
    "cmd": "show platform trident mirroring [detail | session]",
    "desc": "The show platform trident mirroring command displays current parameters of all configured mirroring sessions in Trident series platforms."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "show port-security",
    "cmd": "show port-security",
    "desc": "The show port-security command displays a summary of MAC address port security configuration and status on each interface where switchport port security is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "show port-security interface",
    "cmd": "show port-security interface [INT_NAME]",
    "desc": "The show port-security interface command displays the switchport port-security status of all specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "show port-security mac-address",
    "cmd": "show port-security mac-address",
    "desc": "The show port-security mac-address command display static unicast MAC addresses assigned to interfaces where switchport port security is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show storm-control",
    "cmd": "show storm-control [INT_NAME]",
    "desc": "The show storm-control command displays the storm-control level and interface inbound packet capacity for the specified interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show switch forwarding-mode",
    "cmd": "show switch forwarding-mode",
    "desc": "The show switch forwarding-mode command displays the switch’s current and available forwarding plane hardware modes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show track",
    "cmd": "show track [OBJECT][INFO_LEVEL]",
    "desc": "The show track command displays information about tracked objects configured on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "storm-control",
    "cmd": "storm-control MODE level { threshold_percent | pps threshold }\nno storm-control MODE\ndefault storm-control MODE",
    "desc": "The storm-control command configures and enables storm control on the configuration mode physical interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "switch forwarding-mode",
    "cmd": "switch forwarding-mode MODE_SETTING\nno switch forwarding-mode\ndefault switch forwarding-mode",
    "desc": "The switch forwarding-mode command specifies the mode of the switch's forwarding plane hardware."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "switchport",
    "cmd": "switchport\nno switchport\ndefault switchport\norder command specifies the method that VLANs are allocated.\nconfigure a routed interface. Any IP-level configuration changes made to a routed interface are maintained\nwhen the interface is toggled to switched port mode.\nthe LAG from its component members.",
    "desc": "The switchport command places the configuration mode interface in switched port (Layer 2) mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "switchport default mode access",
    "cmd": "switchport default mode access",
    "desc": "The switchport default mode access command places the configuration mode interface in switched port default access (Layer 3) mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "switchport default mode routed",
    "cmd": "switchport default mode routed",
    "desc": "The switchport default mode routed command places the configuration mode interface in switched port default routed (Layer 3) mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "switchport mac address learning",
    "cmd": "switchport mac address learning\nno switchport mac address learning\ndefault switchport mac address learning",
    "desc": "The switchport mac address learning command enables MAC address learning for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "switchport port-security",
    "cmd": "switchport port-security\nno switchport port-security\ndefault switchport port-security",
    "desc": "The switchport port-security command enables MAC address port security on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "switchport port-security mac-address maximum",
    "cmd": "switchport port-security mac-address maximum max_addr\nno switchport port-security mac-address maximum\ndefault switchport port-security mac-address maximum",
    "desc": "The switchport port-security mac-address maximum command specifies the maximum MAC address limit for the configuration mode interface when configured as a secure port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "switchport port-security violation",
    "cmd": "switchport port-security violation {protect [log]| shutdown}\nno switchport port-security violation protect log\ndefault switchport port-security violation protect log",
    "desc": "The switchport port-security violation command configures port security in protect mode (with the option of enabling logging) or the shutdown mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "system control-plane",
    "cmd": "system control-plane\nip access-group (Control Plane mode)",
    "desc": "The system control-plane command places the switch in control-plane configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "track",
    "cmd": "track object_name interface INTERFACE_NAME PROPERTY\nno track object_name\ndefault track object_name",
    "desc": "The track command creates an object whose state changes to provide information to a client process."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "traffic-loopback",
    "cmd": "traffic-loopback source [system|network] device [phy|mac]\nno traffic-loopback",
    "desc": "The traffic-loopback command is used to create loopbacks to verify the functionality of interfaces and partner links."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "clear counters",
    "cmd": "clear counters [INTERFACE][SCOPE]",
    "desc": "The clear counters command resets the counters to zero for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "clear mac address-table dynamic",
    "cmd": "clear mac address-table dynamic [VLANS][INTERFACE]",
    "desc": "The clear mac address-table dynamic command removes specified dynamic entries from the MAC address table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "clear server-failure servers inactive",
    "cmd": "clear server-failure servers inactive",
    "desc": "The clear server-failure servers inactive command removes all inactive server entries from the server failed history list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "default-profiles",
    "cmd": "default-profiles [LF_PROFILES]\nno default-profiles\ndefault default-profiles",
    "desc": "The default-profiles command specifies the set of link-flap profiles that define error-disable criteria for interfaces where link flap monitoring is enabled without a link flap profile assignment."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "description",
    "cmd": "description label_text\nno description\ndefault description",
    "desc": "The description command adds comment text for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "errdisable detect cause link-change",
    "cmd": "errdisable detect cause link-change\nno errdisable detect cause link-change\ndefault errdisable detect cause link-change",
    "desc": "The errdisable detect cause link-change command enables the error-disabling of Ethernet interfaces when the switch detects a link flap error on the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "errdisable flap-setting cause link-flap",
    "cmd": "errdisable flap-setting cause link-flap max-flaps quantity time period\nno errdisable flap-setting cause link-flap\ndefault errdisable flap-setting cause link-flap",
    "desc": "The errdisable flap-setting cause link-flap command configures the link-flap frequency that defines an link-flap error on an Ethernet interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "errdisable recovery cause",
    "cmd": "errdisable recovery cause CONDITION\nno errdisable recovery cause CONDITION\ndefault errdisable recovery cause CONDITION",
    "desc": "The errdisable recovery cause command enables the automated recovery of error-disabled Ethernet interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "errdisable recovery interval",
    "cmd": "errdisable recovery interval period\nno errdisable recovery interval\ndefault errdisable recovery interval",
    "desc": "The errdisable recovery interval command specifies the period that an error-disabled Ethernet interface remains disabled before automated errdisable recovery begins."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "interface loopback",
    "cmd": "interface loopback l_range\nno interface loopback l_range\ndefault interface loopback l_range",
    "desc": "The interface loopback command places the switch in loopback interface configuration mode for the specified interface and creates a loopback interface if one does not exist."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "ip access-group (Control Plane mode)",
    "cmd": "ip access-group list_name [VRF_INSTANCE] DIRECTION\nno ip access-group [list_name][VRF_INSTANCE] DIRECTION\ndefault ip access-group [list_name][VRF_INSTANCE] DIRECTION",
    "desc": "The ip access-group command applies an IPv4 or standard IPv4 Access Control List (ACL) to the control plane."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "link tracking group (interface)",
    "cmd": "link tracking group group_name DIRECTION\nno link tracking group [group_name]\ndefault link tracking group [group_name]",
    "desc": "The link tracking group command adds the configuration mode interface to a link-state group and specifies whether it is upstream or downstream."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "link tracking group",
    "cmd": "link tracking group group_name\nno link tracking group group_name\ndefault link tracking group group_name",
    "desc": "The link tracking group command creates and enables a link-state group and places the switch in link-state-group configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "links minimum",
    "cmd": "links minimum quantity\nno links minimum\ndefault links minimum",
    "desc": "The links minimum command specifies the minimum number of links the configuration mode link-state group requires."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "load-interval",
    "cmd": "load-interval delay\nno load-interval\ndefault load-interval",
    "desc": "The load-interval command changes the load interval for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "mac address learning",
    "cmd": "mac address learning local limit\nno mac address learning local limit\ndefault mac address learning local limit",
    "desc": "The mac address learning command enables MAC address learning on a VLAN configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "mac address-table aging-time",
    "cmd": "mac-address-table aging-time period\nno mac-address-table aging-time\ndefault mac-address-table aging-time",
    "desc": "The mac address-table aging-time command configures the aging time for MAC address table dynamic entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "mac address-table flushing",
    "cmd": "mac address-table flushing event link-down delay seconds",
    "desc": "The mac address-table flushing command configures a delay timer for flushing MAC addresses from the forwarding table when a link goes down."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "mac address-table static",
    "cmd": "mac address-table static mac_address vlan v_num [DESTINATION]\nno mac address-table static mac_address vlan v_num [DESTINATION]\ndefault mac address-table static mac_address vlan v_num [DESTINATION]",
    "desc": "The mac address-table static command adds a static entry to the MAC address table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "monitor link-flap profiles",
    "cmd": "monitor link-flap [LF_PROFILES]\nno monitor link-flap\ndefault monitor link-flap",
    "desc": "The monitor link-flap profiles command enables link-flap monitoring on the configuration mode interface and specifies the error-disable criteria for the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor server-failure link",
    "cmd": "monitor server-failure link\nno monitor server-failure link\ndefault monitor server-failure link",
    "desc": "The monitor server-failure link command enables Rapid Automated Indication of Link-loss (RAIL) on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor server-failure",
    "cmd": "monitor server-failure\nno monitor server-failure\ndefault monitor server-failure",
    "desc": "The monitor server-failure command places the switch in server-failure configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "monitor session destination cpu",
    "cmd": "monitor session session_name destination cpu\nno monitor session session_name destination cpu\ndefault monitor session session_name destination cpu",
    "desc": "The monitor session destination cpu command configures the CPU as the destination port of a specified port mirroring session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "monitor session destination",
    "cmd": "monitor session session_name destination{cpu | ethernet e_range | port-channel p_range | tunnel\nno monitor session session_name destination\ndefault monitor session session_name destination",
    "desc": "The monitor session destination command configures an interface as the destination port of a specified port mirroring session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "destination 2.2.2.2",
    "cmd": "destination 2.2.2.2",
    "desc": "switch(config)# show monitor session Session redirect_2 -----------------------Source Ports: Destination Ports: Gre1 : status active source"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "dest",
    "cmd": "dest",
    "desc": "TTL"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "monitor session forwarding-drop",
    "cmd": "monitor session session_name forwarding-drop destination tunnel mode\nno monitor session session_name forwarding-drop destination tunnel mode\ndefault monitor session session_name forwarding-drop destination tunnel mode",
    "desc": "The monitor session forwarding-drop command configures a forwarding-drop session for mirroring ingress packets that are dropped during ASIC forwarding."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "monitor session ip access-group",
    "cmd": "monitor session session_name ip access-group acl_name\nno monitor session session_name ip access-group\ndefault monitor session session_name ip access-group",
    "desc": "The monitor session ip access-group command configures an ACL to filter the traffic being mirrored to the destination port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor session source",
    "cmd": "monitor session session_name source INT_NAME DIRECTION\nno monitor session session_name source INT_NAME DIRECTION\ndefault monitor session session_name source INT_NAME DIRECTION",
    "desc": "The monitor session source command configures the source port of a specified port mirroring session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "monitor session source ip access-group",
    "cmd": "monitor session s_name source INT_NAME [DIRECT] ip access-group acl_name\nno monitor session s_name source INT_NAME [DIRECT] ip access-group acl_name\ndefault monitor session s_name source INT_NAME [DIRECT] ip access-group acl_name",
    "desc": "The monitor session source ip access-group command configures an ACL to filter the traffic being mirrored from a specific source port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor session truncate",
    "cmd": "monitor session session_name truncate\nno monitor session session_name truncate\ndefault monitor session session_name truncate",
    "desc": "The monitor session truncate command configures a port mirroring session to truncate mirrored packets, retaining only the first 160 bytes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "mtu",
    "cmd": "mtu bytes\nno mtu\ndefault mtu",
    "desc": "The mtu command configures the IPv4 and IPv6 Maximum Transmission Unit (MTU) size for the Interface Configuration Mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "network (server-failure configuration mode)",
    "cmd": "network netv4_address\nno network netv4_address\ndefault network netv4_address",
    "desc": "The network command specifies the IPv4 network space that Rapid Automated Indication of Link-loss (RAIL) monitors for failed links to connected servers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "no monitor session",
    "cmd": "no monitor session session_name\ndefault monitor session session_name",
    "desc": "The no monitor session and default monitor session commands remove the specified monitor session from the switch by deleting all corresponding monitor commands from running-config."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "phy diag",
    "cmd": "phy diag [transmitter | receiver] test pattern TestPattern\nno phy diag [transmitter | receiver] test pattern TestPattern\ndefault phy diag [transmitter | receiver] test pattern TestPattern",
    "desc": "Use the phy diag command to configure a test pattern in the interface configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "platform sand monitor serdes error log",
    "cmd": "platform sand monitor serdes error log",
    "desc": "The platform sand monitor serdes error log command is used for enabling the serdes error log for fabric link monitoring."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "platform sand monitor serdes error threshold",
    "cmd": "platform sand monitor serdes error threshold",
    "desc": "The platform sand monitor serdes error threshold command is used for generating a fabric link monitoring serdes error threshold."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "platform sand monitor serdes poll period",
    "cmd": "platform sand monitor serdes poll period",
    "desc": "The platform sand monitor serdes poll period command is used to enable the serdes poll period."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "platform sand monitor serdes poll threshold isolation",
    "cmd": "platform sand monitor serdes poll threshold isolation",
    "desc": "The platform sand monitor serdes poll threshold isolation command is used to set and enables fabric link monitoring for serdes poll threshold isolation."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "platform sand monitor serdes poll threshold recovery",
    "cmd": "platform sand monitor serdes poll threshold recovery",
    "desc": "The platform sand monitor serdes poll threshold recovery command is used to set and enable fabric link monitoring for serdes poll threshold recovery."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "profile max-flaps (Link Flap Configuration)",
    "cmd": "profile PROFILE_NAME max-flaps flap_max time period [EXTENSIONS]\nno profile LF_PROFILE",
    "desc": "The profile max-flaps command creates a link flap profile that, when assigned to an Ethernet interface, specifies the conditions that result in an error-disable action."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "proxy (server-failure configuration mode)",
    "cmd": "proxy [lifetime time_span]\nno proxy [lifetime]\ndefault proxy [lifetime]",
    "desc": "The proxy command enables the Rapid Automated Indication of Link-loss (RAIL) proxy setting and specifies the interval that RAIL responds to messages sent to servers on failed links, starting from when the switch"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show bridge mac-address-table aging timeout",
    "cmd": "show bridge mac-address-table aging timeout",
    "desc": "The show bridge mac-address-table aging timeout command displays the aging time for MAC address table dynamic entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show errdisable recovery",
    "cmd": "show errdisable recovery",
    "desc": "The show errdisable recovery command displays information about the recovery intervals and error disable causes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show fabric monitoring health",
    "cmd": "platform sand monitor health",
    "desc": "The platform sand monitor health command is used to display the fabric monitoring connected state status with isolated links."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces",
    "cmd": "show interfaces [INT_NAME]",
    "desc": "The show interfaces command displays operational status and configuration information of specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces description",
    "cmd": "show interfaces [INT_NAME] description",
    "desc": "The show interfaces description command displays the status and description text of the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces phy diag",
    "cmd": "show interfaces [interface type interface range] phy diag [error-correction | test pattern]",
    "desc": "• interface type interface range Type of interface and range."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show link tracking group",
    "cmd": "show link tracking group [DATA_LEVEL][GROUPS]",
    "desc": "The show link tracking group command displays information about a specified link-state group or about all groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show mac address-table",
    "cmd": "show mac address-table [ENTRY_TYPE][MAC_ADDR][INTF_1 ... INTF_N][VLANS]",
    "desc": "The show mac-address-table command displays the specified MAC address table entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show mac address-table count",
    "cmd": "show mac address-table count [VLANS]",
    "desc": "The show mac-address-table count command displays the number of entries in the MAC address table for the specified VLAN or for all VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show mac address-table mlag-peer",
    "cmd": "show mac address-table mlag-peer [ENTRY_TYPE][MAC_ADDR][INTF_1 ... INTF_N][VLANS]",
    "desc": "The show mac-address-table mlag-peer command displays the specified MAC address table entries learned from the MLAG peer switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show mac address-table multicast",
    "cmd": "show mac address-table multicast [MAC_ADDR][INTF][VLANS]",
    "desc": "The show mac-address-table command displays the specified multicast MAC address table entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show mac address-table multicast brief",
    "cmd": "show mac address-table multicast [VLANS] brief",
    "desc": "The show mac-address-table command displays a summary of multicast MAC address table entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor server-failure",
    "cmd": "show monitor server-failure",
    "desc": "The show monitor server-failure command displays Rapid Automated Indication of Link-loss (RAIL) configuration settings and the number of servers on each monitored network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor server-failure history",
    "cmd": "show monitor server-failure history",
    "desc": "The show monitor server-failure history command displays the time of all link failures detected by Rapid Automated Indication of Link-loss (RAIL) and includes the interface name for each failure."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor server-failure servers",
    "cmd": "show monitor server-failure servers [SERVER_LIST]",
    "desc": "The show monitor server-failure servers command displays status and configuration information about each server that RAIL is monitoring."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Interface Name With Feature",
    "cmd": "Interface Name With Feature",
    "desc": "Interface Name Without Feature Supported Speeds with Feature Default Speed Ethernetx/1 Ethernetx/1 400G-8, 200G-4, 100G-2, 100G-4 400G-8 Nonexistent Ethernetx/2 N/A N/A Ethernetx/2 Ethernetx/3 100G-2 100G-2"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "boot port numbering octal interfaces 4",
    "cmd": "boot port numbering octal interfaces 4\nno boot port numbering octal interfaces 4",
    "desc": "The boot port numbering octal interfaces 4 command configures a chassis to octal port renumbering with four interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "system l1 module",
    "cmd": "system l1 module linecard linecard_name switch switch_name",
    "desc": "The system l1 module command enters the configuration mode for Layer 1 parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "system l1 module profile",
    "cmd": "system l1 module module_name profile profile_name",
    "desc": "The system l1 module profile command configures Layer 1 module profiles on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "system l1 unsupported",
    "cmd": "system l1 unsupported [error-correction | speed] action [error | warn]",
    "desc": "The system l1 unsupported command enters the configuration mode for Layer 1 parameters and configures the response to unsupported L1 configurations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show l1 modules profile status",
    "cmd": "show l1 modules profile status",
    "desc": "The show l1 modules profile status command displays the status of configured Layer 1 profiles on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Spanning Tree Protocol",
    "cmd": "Spanning Tree Protocol",
    "desc": "Spanning Tree Protocols prevent bridging loops in Layer 2 Ethernet networks."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Spanning Tree Overview",
    "cmd": "Spanning Tree Overview",
    "desc": "An Ethernet network functions properly when only one active path exists between any two stations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Spanning Tree Protocol Versions",
    "cmd": "Spanning Tree Protocol Versions",
    "desc": "STP versions supported by Arista switches address two limitations of the original Spanning Tree protocol that was standardized as IEEE 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Switchport Interface Pairs",
    "cmd": "Switchport Interface Pairs",
    "desc": "Switchport interface pairs associate two interfaces in a primary-backup configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "Port Roles",
    "cmd": "Port Roles",
    "desc": "Messages from connected devices to the root bridge traverse a least-cost path, which has the smallest cost among all possible paths to the root bridge."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "Port Activity States",
    "cmd": "Port Activity States",
    "desc": "A ports activity state defines its current STP activity level."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "Port Types",
    "cmd": "Port Types",
    "desc": "Port type is a configurable parameter that reflects the type of network segment that is connected to the port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "Switchport Backup Mode",
    "cmd": "spanning-tree mode backup",
    "desc": "Switchport backup interface pairs are enabled through the spanning-tree mode command with the backup option."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Spanning Tree Instance Configuration",
    "cmd": "Spanning Tree Instance Configuration",
    "desc": "A network performs these steps to set up an STP instance: 1."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Port Roles and Rapid Convergence",
    "cmd": "Port Roles and Rapid Convergence",
    "desc": "Spanning Tree provides the following options for controlling port configuration and operation: • portfast: Allows ports to skip learning state before entering the forwarding state."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "abort (mst-configuration mode)",
    "cmd": "abort",
    "desc": "The abort command, in MST-configuration mode, discards pending changes to the MST region configuration, then returns the switch to global configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "clear spanning-tree counters",
    "cmd": "clear spanning-tree counters [INT_NAME]",
    "desc": "The clear spanning-tree counters command resets the BPDU counters for the specified interfaces to zero in all CLI sessions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "clear spanning-tree counters session",
    "cmd": "clear spanning-tree counters session",
    "desc": "The clear spanning-tree counter session command resets the BPDU counters to zero on all interfaces in the current CLI session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "clear spanning-tree detected-protocols",
    "cmd": "clear spanning-tree detected-protocols [INT_NAME]",
    "desc": "The clear spanning-tree detected-protocols command restarts the Spanning Tree Protocol (STP) migration state machine on the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "disabled-time",
    "cmd": "disabled-time [period]\nno disabled-time [period]\ndefault disabled-time [period]",
    "desc": "The disabled-time command sets the time for which the port remains disabled after a loop is detected by loop protection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "instance",
    "cmd": "instance mst_inst vlans v_range\nno instance mst_inst [vlans v_range]\nno default instance mst_inst [vlans v_range]",
    "desc": "The instance command inserts an entry into the VLAN-to-instance map that associates a set of VLANs to an MST instance."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "loop-protection",
    "cmd": "loop-protection\nno loop-protection\ndefault loop-protection",
    "desc": "The loop-protection command enables loop protection on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor loop-protection",
    "cmd": "monitor loop-protection",
    "desc": "The monitor loop-protection command places the switch in loop-protection configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "name (mst-configuration mode)",
    "cmd": "name label_text\nno name\ndefault name",
    "desc": "The name command configures the MST region name."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "protect vlan",
    "cmd": "protect vlan vlan-range",
    "desc": "The protect vlan command specifies which VLANs participate in loop protection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "rate-limit",
    "cmd": "rate-limit [frames]\nno rate-limit [frames]\ndefault rate-limit [frames]",
    "desc": "The rate-limit command sets the maximum number of loop detection frames which can be sent by the switch per second."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "revision (mst-configuration mode)",
    "cmd": "revision rev_number\nno revision\ndefault revision",
    "desc": "The revision command configures the MST revision number."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show (mst-configuration mode)",
    "cmd": "show [EDIT_VERSION]",
    "desc": "The show command displays the current and pending MST configuration: Exiting MST configuration mode stores all pending configuration changes to running-config."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show loop-protection",
    "cmd": "show loop-protection [detail]",
    "desc": "The show loop-protection command displays loop protection status."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree",
    "cmd": "show spanning-tree [VLAN_ID][INFO_LEVEL]",
    "desc": "The show spanning-tree command displays Spanning Tree Protocol (STP) data, organized by instance."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree blockedports",
    "cmd": "show spanning-tree blockedports",
    "desc": "The show spanning-tree blockedports command displays the list of blocked (discarding) ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree counters",
    "cmd": "show spanning-tree counters",
    "desc": "The show spanning-tree counters command displays the number of BPDU transactions on each interface running spanning tree."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree instance",
    "cmd": "show spanning-tree instance [INFO_LEVEL]",
    "desc": "The show spanning-tree instance command displays spanning tree protocol bridge configuration settings for each instance on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree mst configuration",
    "cmd": "show spanning-tree mst configuration [INFO_LEVEL]",
    "desc": "The show spanning-tree mst configuration command displays information about the MST regions VLAN-to-instance mapping."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree mst interface",
    "cmd": "show spanning-tree mst [INSTANCE] interface INT_NAME [INFO_LEVEL]",
    "desc": "The show spanning-tree mst interface command displays Multiple Spanning Tree Protocol (MSTP) information for a specified interface on the specified MST instances."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree mst test information",
    "cmd": "show spanning-tree mst test information",
    "desc": "The show spanning-tree mst test information displays diagnostic spanning tree protocol information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree root",
    "cmd": "show spanning-tree root [INFO_LEVEL]",
    "desc": "The show spanning-tree root command displays the Bridge-ID, cost to the root bridge, root port, and the root bridge timer settings for all instances."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree topology status",
    "cmd": "show spanning-tree topology [VLAN_NAME] status [INFO_LEVEL]",
    "desc": "The show spanning-tree topology status command displays the forwarding state of ports on the specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree transmit active",
    "cmd": "show spanning-tree transmit active INFO_LEVEL",
    "desc": "The show spanning-tree transmit active command displays spanning tree protocol bridge assurance information for network ports or for all ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "shutdown (Loop-protection)",
    "cmd": "shutdown\nno shutdown",
    "desc": "The shutdown command disables loop protection globally."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree bpdu tx hold-count",
    "cmd": "spanning-tree bpdu tx hold-count max_bpdu\nno spanning-tree bpdu tx hold-count\ndefault spanning-tree bpdu tx hold-count",
    "desc": "The spanning-tree bpdu tx hold-count command specifies the maximum number of BPDUs per second that the switch can send from an interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree bpdufilter",
    "cmd": "spanning-tree bpdufilter FILTER_STATUS\nno spanning-tree bpdufilter\ndefault spanning-tree bpdufilter",
    "desc": "The spanning-tree bpdufilter command controls bridge protocol data unit (BPDU) filtering on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree bpduguard",
    "cmd": "spanning-tree bpduguard GUARD_ACTION\nno spanning-tree bpduguard\ndefault spanning-tree bpduguard",
    "desc": "The spanning-tree bpduguard command controls BPDU Guard on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree bpduguard rate-limit count (global)",
    "cmd": "spanning-tree bpduguard rate-limit count max_bpdu [interval period]\nno spanning-tree bpduguard rate-limit count\ndefault spanning-tree bpduguard rate-limit count",
    "desc": "The spanning-tree bpduguard rate-limit count command sets the maximum BPDU reception rate (quantity per interval) for ports that are not covered by a spanning-tree bpduguard rate-limit count (interface) command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree bpduguard rate-limit count (interface)",
    "cmd": "spanning-tree bpduguard rate-limit count max_bpdu [TIMER]\nno spanning-tree bpduguard rate-limit count\ndefault spanning-tree bpduguard rate-limit count",
    "desc": "The spanning-tree bpduguard rate-limit count command configures the maximum BPDU reception rate for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree bpduguard rate-limit default",
    "cmd": "spanning-tree bpduguard rate-limit default\nno spanning-tree bpduguard rate-limit default\ndefault spanning-tree bpduguard rate-limit default",
    "desc": "The spanning-tree bpduguard rate-limit default command configures the global default BPDU rate limit setting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree bpduguard rate-limit enable / disable",
    "cmd": "spanning-tree bpduguard rate-limit enable\nspanning-tree bpduguard rate-limit disable\nno spanning-tree bpduguard rate-limit\ndefault spanning-tree bpduguard rate-limit",
    "desc": "These commands enable and disable BPDU rate limiting on the configuration mode interface: • spanning-tree bpduguard rate-limit enable enables BPDU rate limiting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree cost",
    "cmd": "spanning-tree MODE cost value\nno spanning-tree MODE cost\ndefault spanning-tree MODE cost",
    "desc": "The spanning-tree cost command configures the path cost of the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree edge-port bpdufilter default",
    "cmd": "spanning-tree edge-port bpdufilter default\nno spanning-tree edge-port bpdufilter default\ndefault spanning-tree edge-port bpdufilter default",
    "desc": "The spanning-tree edge-port bpdufilter default command configures the global BPDU filter setting as enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree edge-port bpduguard default",
    "cmd": "spanning-tree edge-port bpduguard default\nno spanning-tree edge-port bpduguard default\ndefault spanning-tree edge-port bpduguard default",
    "desc": "The spanning-tree edge-port bpduguard default command sets the global BPDU guard setting as enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree forward-time",
    "cmd": "spanning-tree forward-time period\nno spanning-tree forward-time\ndefault spanning-tree forward-time",
    "desc": "The spanning-tree forward-time command configures the forward delay timer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree guard",
    "cmd": "spanning-tree guard PORT_MODE\nno spanning-tree guard\ndefault spanning-tree guard",
    "desc": "The spanning-tree guard command enables root guard or loop guard on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree guard loop default",
    "cmd": "spanning-tree guard loop default\nno spanning-tree guard loop default\ndefault spanning-tree guard loop default",
    "desc": "The spanning-tree guard loop default command configures the global loop guard setting as enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree hello-time",
    "cmd": "spanning-tree hello-time period\nno spanning-tree hello-time\ndefault spanning-tree hello-time",
    "desc": "The spanning-tree hello-time command configures the hello time, which specifies the transmission interval between consecutive bridge protocol data units (BPDU) that the switch sends as a root bridge."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree link-type",
    "cmd": "spanning-tree link-type TYPE\nno spanning-tree link-type\ndefault spanning-tree link-type",
    "desc": "The spanning-tree link-type command specifies the configuration mode interfaces link type, which is normally derived from the ports duplex setting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree max-age",
    "cmd": "spanning-tree max-age period\nno spanning-tree max-age\ndefault spanning-tree max-age",
    "desc": "The spanning-tree max-age command configures the switchs max age timer, which specifies the max age value that the switch inserts in outbound BPDU packets it sends as a root bridge."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree max-hops",
    "cmd": "spanning-tree max-hops ports\nno spanning-tree max-hops\ndefault spanning-tree max-hops",
    "desc": "The spanning-tree max-hops command specifies the max hop setting that the switch inserts into BPDUs that it sends out as the root bridge."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree mode",
    "cmd": "spanning-tree mode VERSION\nno spanning-tree mode\ndefault spanning-tree mode",
    "desc": "The spanning-tree mode command specifies the spanning tree protocol version that the switch runs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree mst configuration",
    "cmd": "spanning-tree mst configuration\nno spanning-tree mst configuration\ndefault spanning-tree mst configuration",
    "desc": "The spanning-tree mst configuration command places the switch in MST-configuration mode, which is the group change mode where MST region parameters are configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree mst pvst border",
    "cmd": "spanning-tree mst pvst border\nno spanning-tree mst pvst border\ndefault spanning-tree mst pvst border",
    "desc": "The spanning-tree mst pvst border command configures MSTP PVST border feature to automatically detect border ports facing PVST+ regions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree portchannel guard misconfig",
    "cmd": "spanning-tree portchannel guard misconfig\nno spanning-tree portchannel guard misconfig\ndefault spanning-tree portchannel guard misconfig\nspanning-tree etherchannel guard misconfig\nno spanning-tree etherchannel guard misconfig\ndefault spanning-tree etherchannel guard misconfig\nguard misconfig commands are equivalent.",
    "desc": "The spanning-tree portchannel guard misconfig command enables the switch to detect misconfigured port channels that may cause network loops by monitoring inbound BPDUs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree portfast <port type>",
    "cmd": "spanning-tree portfast PORT_MODE\nno spanning-tree portfast PORT_MODE\ndefault spanning-tree portfast PORT_MODE",
    "desc": "The spanning-tree portfast command specifies the STP port mode for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree portfast auto",
    "cmd": "spanning-tree portfast auto\nno spanning-tree portfast auto\ndefault spanning-tree portfast auto",
    "desc": "The spanning-tree portfast auto command enables auto-edge detection on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree portfast",
    "cmd": "spanning-tree portfast [auto | edge | network | normal]\nno spanning-tree portfast\ndefault spanning-tree portfast",
    "desc": "The spanning-tree portfast command configures an STP port to immediately enter forwarding state after establishing a link."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree port-priority",
    "cmd": "spanning-tree [MODE] port-priority value\nno spanning-tree [MODE] port-priority\ndefault spanning-tree [MODE] port-priority",
    "desc": "The spanning-tree port-priority command specifies the configuration mode interfaces port-priority number."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree priority",
    "cmd": "spanning-tree [MODE] priority level\nno spanning-tree [MODE] priority\ndefault spanning-tree [MODE] priority",
    "desc": "The spanning-tree priority command configures the bridge priority number."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree root",
    "cmd": "spanning-tree [MODE] root TYPE\nno spanning-tree [MODE] root\ndefault spanning-tree [MODE] root",
    "desc": "The spanning-tree root command configures the bridge priority number by adding a spanning-tree priority command to the configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree transmit active",
    "cmd": "spanning-tree transmit active\nno spanning-tree transmit active\ndefault spanning-tree transmit active",
    "desc": "The spanning-tree transmit active command enables bridge assurance globally, which enables bridge assurance on all ports with a port type of network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "spanning-tree vlan-id",
    "cmd": "spanning-tree vlan-id v_range\nno spanning-tree vlan-id v_range\ndefault spanning-tree vlan-id v_range",
    "desc": "The spanning-tree vlan-id command enables Spanning Tree Protocol (STP) on specified VLANs by removing any corresponding no spanning-tree vlan-id statements from running-config."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport backup-link",
    "cmd": "switchport backup-link INT_NAME [BALANCE]\nno switchport backup-link\ndefault switchport backup-link",
    "desc": "The switchport backup-link command establishes a primary-backup configuration for forwarding VLAN traffic between the command mode interface and a specified interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "transmit-interval",
    "cmd": "transmit-interval interval",
    "desc": "The transmit-interval command sets the interval at which loop detection packets are transmitted."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "sec",
    "cmd": "sec",
    "desc": "Max Age 20 sec Forward Delay 15 sec Priority Address Hello Time 32870 (priority 32768 sys-id-ext 102) 001c."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "sec Max Age 20 sec Forward Delay 15 sec switch#",
    "cmd": "sec Max Age 20 sec Forward Delay 15 sec switch#",
    "desc": "0:04:07 ago"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree instance detail",
    "cmd": "show spanning-tree instance detail",
    "desc": "The show spanning-tree instance detail command displays detailed MST information including MSTP-Rapid PVST+ interoperation status and Port channel port ID allocation range."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree interface",
    "cmd": "show spanning-tree interface INT_NAME [INFO_LEVEL]",
    "desc": "The show spanning-tree interface command displays spanning tree protocol information for the specified interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Spanning-Tree",
    "title": "show spanning-tree mst",
    "cmd": "show spanning-tree mst [INSTANCE] [INFO_LEVEL]",
    "desc": "The show spanning-tree mst command displays configuration and state information for Multiple Spanning Tree protocol (MST) instances."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "clear lldp counters",
    "cmd": "clear lldp counters [SCOPE]",
    "desc": "The clear lldp counters command resets the LLDP counters to zero."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "clear lldp table",
    "cmd": "clear lldp table",
    "desc": "The clear lldp table command clears neighbor information from the LLDP table."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "lldp hold-time",
    "cmd": "lldp hold-time period\nno lldp hold-time\ndefault lldp hold-time",
    "desc": "The lldp hold-time command specifies the amount of time a receiving device should maintain the information sent by the device before discarding it."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "lldp management-address",
    "cmd": "lldp management-address [INTERFACE]\nno lldp management-address [INTERFACE]\ndefault lldp management-address [INTERFACE]",
    "desc": "The lldp management-address command enables the user to add the IP management address used for LLDP Type-Length-Value (TLV)."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "lldp management-address vrf",
    "cmd": "lldp management-address vrf VRF_INSTANCE\nno lldp management-address vrf VRF_INSTANCE\ndefault lldp management-address vrf VRF_INSTANCE",
    "desc": "The lldp management-address vrf command enables the user to add the IP address of the VRF interface used in LLDP Type-Length-Value (TLV)."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "lldp receive",
    "cmd": "lldp receive\nno lldp receive\ndefault lldp receive",
    "desc": "The lldp receive command enables LLDP packets on an interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "lldp receive packet tagged drop",
    "cmd": "lldp receive packet tagged drop",
    "desc": "The lldp receive packet tagged drop command is a global configuration command and when configured, the LLDP ignores all the packets with VLAN-tag."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "lldp run",
    "cmd": "lldp run\nno lldp run\ndefault lldp run",
    "desc": "The lldp run command enables LLDP on the switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "lldp timer reinitialization",
    "cmd": "lldp timer reinitialization delay\nno lldp timer reinitialization\ndefault lldp timer reinitialization",
    "desc": "The lldp timer reinitialization command sets the time delay in seconds for LLDP to initialize."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "lldp timer",
    "cmd": "lldp timer transmission_time\nno lldp timer\ndefault lldp timer",
    "desc": "The lldp timer command specifies the amount of time a receiving device should maintain the information sent by the device before discarding it."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "lldp tlv transmit",
    "cmd": "lldp tlv transmit TLV_NAME\nno lldp tlv transmit TLV_NAM\ndefault lldp tlv transmit TLV_NAME",
    "desc": "The lldp tlv transmit command allows the user to specify the Type-Length-Values (TLVs) to include in LLDP packets."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "lldp transmit",
    "cmd": "lldp transmit\nno lldp transmit\ndefault lldp transmit",
    "desc": "The lldp transmit command enables the transit of LLDP packets on an interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "poe negotiation lldp disabled",
    "cmd": "poe negotiation lldp disabled\nno poe negotiation lldp disabled\ndefault poe negotiation lldp disabled",
    "desc": "Power Via MDI TLVs are included by default in LLDP packets sent to Power over Ethernet (PoE) Powered Devices (PDs) to allow dynamic negotiation of power levels."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show lldp counters",
    "cmd": "show lldp counters [INTERFACE]",
    "desc": "The show lldp counters command displays LLDP traffic information for the switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show lldp local-info",
    "cmd": "show lldp local-info [INTERFACE]",
    "desc": "The show lldp local-info command displays LLDP errors and overflows."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show lldp neighbors",
    "cmd": "show lldp neighbors [INTERFACE][INFO_LEVEL]",
    "desc": "The show lldp neighbors command displays information about the switch’s LLDP neighbors."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show lldp",
    "cmd": "show lldp [INTERFACE]",
    "desc": "The show lldp command displays LLDP information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VLAN Introduction",
    "cmd": "VLAN Introduction",
    "desc": "Arista switches support industry standard 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VLAN Conceptual Overview",
    "cmd": "VLAN Conceptual Overview",
    "desc": "Virtual LANs (VLANs)"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VLAN Definition",
    "cmd": "VLAN Definition",
    "desc": "A Virtual Local Area Network (VLAN) allows a group of devices to communicate as if they were in the same network regardless of their physical location."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VLAN Switching",
    "cmd": "VLAN Switching",
    "desc": "Ethernet and port channel interfaces are configured as switched ports by default."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VLAN Trunking and Trunk Groups",
    "cmd": "VLAN Trunking and Trunk Groups",
    "desc": "Trunking extends multiple VLANs beyond the switch through a common interface or port channel."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VLAN Routing",
    "cmd": "VLAN Routing",
    "desc": "Each VLAN can be associated with a Switch Virtual Interface (SVI), also called a VLAN interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VLAN Interfaces",
    "cmd": "VLAN Interfaces",
    "desc": "A Switched Virtual Interface (SVI) connects to the VLAN segment on the switch to provide Layer 3 processing for packets from the VLAN."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VLAN Translation",
    "cmd": "VLAN Translation",
    "desc": "VLAN translation allows you to map packets from one VLAN to another."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VLAN Configuration Procedures",
    "cmd": "VLAN Configuration Procedures",
    "desc": "These sections describe basic VLAN configuration tasks."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VLAN Policy",
    "cmd": "vlan 333",
    "desc": "The VLAN policy configuration command enables a switch to configure a VLAN policy when it receives a packet with unknown destination MAC address on a VLAN."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Port VLAN Scaling on DCS-7160",
    "cmd": "config terminal",
    "desc": "Port VLAN scaling allows the user to configure a subset of ports in the scale mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "autostate",
    "cmd": "autostate\nno autostate\ndefault autostate",
    "desc": "When autostate is enabled, the VLAN interface will be up when: • the corresponding VLAN exists and is in the active state."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "encapsulation dot1q vlan",
    "cmd": "encapsulation dot1q vlan vlan_id\nno encapsulation dot1q vlan\ndefault encapsulation dot1q vlan",
    "desc": "Routed Port VLAN Translation In the configuration mode for an Ethernet or port channel interface, the encapsulation dot1q vlan translates packets with a dot1q header to the internal VLAN for a routed port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "interface vlan",
    "cmd": "interface vlan v_range\nno interface vlan v_range\ndefault interface vlan v_range",
    "desc": "The interface vlan command places the switch in VLAN-interface configuration mode for modifying parameters of the Switch Virtual Interface (SVI)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "l2-protocol encapsulation dot1q vlan",
    "cmd": "l2-protocol encapsulation dot1q vlan vlan_id\nno l2-protocol encapsulation dot1q vlan\ndefault l2-protocol encapsulation dot1q vlan",
    "desc": "The l2-protocol encapsulation dot1q vlan command enables Layer 2 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mac address forwarding",
    "cmd": "mac address forwarding [unicast | multicast] miss action [drop | flood | log]\nno mac address forwarding [unicast | multicast] miss action [drop | flood | log]\ndefault mac address forwarding [unicast | multicast] miss action [drop | flood | log]",
    "desc": "The mac address forwarding command enables a switch to configure a VLAN policy when it receives a packet with an unknown destination MAC address on a VLAN."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "pvlan mapping",
    "cmd": "pvlan mapping {add | remove | vlan ID}\nno pvlan mapping {add | remove | vlan ID}\ndefault pvlan mapping {add | remove | vlan ID}",
    "desc": "The pvlan mapping command maps a Switch Virtual Interface (SVI) available in the primary VLAN to the secondary VLAN or VLANs in the VLAN configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show dot1q-tunnel",
    "cmd": "show dot1q-tunnel [INTERFACE]",
    "desc": "The show dot1q-tunnel command displays the ports that are configured in dot1q-tunnel switching mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces switchport backup-link",
    "cmd": "show interfaces [INTERFACE] switchport backup-link\nshow interfaces switchport backup-link [module {Fabric f_num | Linecard lc_num | Supervisor\nsvr_num | Switchcard | 1-2 | 3-6 }]",
    "desc": "The show interfaces switchport backup-link command displays interfaces that are configured as switchport backup pairs and the operational status of each interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show interfaces switchport vlan mapping",
    "cmd": "show interfaces switchport vlan mapping",
    "desc": "The show interfaces switchport vlan mapping command displays mapping information of the configured VLANs in an interface mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces switchport",
    "cmd": "show interfaces [INTERFACE] switchport",
    "desc": "The show interfaces switchport command displays the switching configuration and operational status of the specified ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show interfaces trunk",
    "cmd": "show interfaces [INTERFACE] trunk",
    "desc": "The show interfaces trunk command displays configuration and status information for interfaces configured in switchport trunk mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show interfaces vlans",
    "cmd": "show interfaces [INT_NAME] vlans",
    "desc": "The show interfaces vlans command displays a table that lists the VLANs that are carried by the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show pvlan mapping interfaces",
    "cmd": "show pvlan mapping interfaces",
    "desc": "The show pvlan mapping interfaces command displays information about the private VLAN mapping interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vlan",
    "cmd": "show vlan [VLAN_LIST] [PORT_ACTIVITY]",
    "desc": "The show vlan command displays the VLAN ID, name, status, and member ports of all configured VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vlan brief count",
    "cmd": "show vlan brief count",
    "desc": "The show vlan brief count command displays the number of VLANs that are configured on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vlan counters",
    "cmd": "show vlan counters",
    "desc": "Displays information about configured ingress and egress VLAN counters on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vlan dynamic",
    "cmd": "show vlan dynamic",
    "desc": "The show vlan dynamic command displays the source and quantity of dynamic VLANs on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vlan internal allocation policy",
    "cmd": "show vlan internal allocation policy",
    "desc": "The show vlan internal allocation policy command displays the method the switch uses to allocate VLANs to routed ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vlan internal usage",
    "cmd": "show vlan internal usage",
    "desc": "The show vlan internal usage command shows the VLANs that are allocated as internal VLANs for routed ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vlan trunk group",
    "cmd": "show vlan [ VLAN_LIST ] trunk group",
    "desc": "The show vlan trunk group command displays the trunk group membership of the specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "state",
    "cmd": "state OPERATION_STATE\nno state\ndefault state",
    "desc": "The state command configures the VLAN transmission state of the configuration mode VLAN."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport access vlan",
    "cmd": "switchport access vlan v_num\nno switchport access vlan\ndefault switchport access vlan",
    "desc": "The switchport access vlan command specifies the access VLAN of the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport dot1q ethertype",
    "cmd": "switchport dot1q ethertype ethertype\nno switchport dot1q ethertype\ndefault switchport dot1q ethertype",
    "desc": "The switchport dot1q ethertype command configures the tag protocol identifier (TPID, also known as a dot1q ethertype), of the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport mode",
    "cmd": "switchport mode MODE_TYPE priority tag transmit\nno switchport mode\ndefault switchport mode",
    "desc": "The switchport mode command specifies the switching mode of the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport trunk allowed vlan",
    "cmd": "switchport trunk allowed vlan EDIT_ACTION\nno switchport trunk allowed vlan\ndefault switchport trunk allowed vlan",
    "desc": "The switchport trunk allowed vlan command creates or modifies the list of VLANs for which the configuration mode interface, in trunk mode, handles tagged traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport trunk group",
    "cmd": "switchport trunk group [ group_name ]\nno switchport trunk group [ group_name ]\ndefault switchport trunk group [ group_name ]",
    "desc": "The switchport trunk group command assigns the configuration mode interface to the specified trunk group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport trunk native vlan",
    "cmd": "switchport trunk native vlan VLAN_ID\nno switchport trunk native vlan\ndefault switchport trunk native vlan",
    "desc": "The switchport trunk native vlan command specifies the trunk mode native VLAN for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport vlan forwarding",
    "cmd": "switchport vlan forwarding [ accept | all ]",
    "desc": "The switchport vlan forwarding command forwards packets between the ports belonging to VLAN in the interface configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport vlan translation",
    "cmd": "switchport vlan translation [DIRECTION] incoming_vlanid new_vlanid\nno switchport vlan translation incoming_vlanid new_vlanid\nno switchport vlan translation DIRECTION incoming_vlanid\ndefault switchport vlan translation incoming_vlanid new_vlanid\ndefault switchport vlan translation DIRECTION incoming_vlanid",
    "desc": "The switchport vlan translation command allows you to map packets from one VLAN to another using VLAN translation."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport vlan translation required",
    "cmd": "switchport vlan translation [in | out] required",
    "desc": "On routed ports, the switchport vlan translation required command (permitted only on routed ports) configures the VLAN on the interface to act as the native VLAN."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "trunk group",
    "cmd": "trunk group [name]\nno trunk group [name]\ndefault trunk group [name]",
    "desc": "The trunk group command assigns the configuration mode VLAN to a specified trunk group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "vlan",
    "cmd": "vlan vlan_range\nno vlan vlan_range\ndefault vlan vlan_range",
    "desc": "The vlan command places the switch in VLAN configuration mode to configure a set of virtual LANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "vlan internal order",
    "cmd": "vlan internal order DIRECTION [RANGE_VLAN]\nno vlan internal order\ndefault vlan internal order",
    "desc": "The vlan internal order command specifies the range that the switch can allocate as internal VLANs when configuring routed ports and the order of their allocation."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Set the Priority Rank to the Traffic Class",
    "cmd": "dcbx application tcp-sctp 860 priority 5",
    "desc": "The dcbx application priority command assigns a priority rank to the specified traffic class in the application priority table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Set the Priority Flow Control Priority",
    "cmd": "interface ethernet 2",
    "desc": "The priority-flow-control priority command in DCBX mode creates a priority group that pauses priority."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "which means the PFC watchdog is active.",
    "cmd": "show interface Eth1/1 status errdisabled",
    "desc": "switch# show priority-flow-control The hardware supports PFC on priorities 0 1 2 3 4 5 6 7 The PFC watchdog default timeout is 3."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "dcbx application priority",
    "cmd": "dcbx application [ APPLICATION_TYPE priority ] rank\nno dcbx application [ APPLICATION_TYPE priority ]\ndefault dcbx application [ APPLICATION_TYPE priority ]",
    "desc": "The dcbx application priority command assigns a priority rank to the specified traffic class in the application priority table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "dcbx ets",
    "cmd": "dcbx ets [ qos map cos value traffic-class value | traffic-class value bandwidth value ]",
    "desc": "The dcbx ets command configures the enhanced transmission selection (ETS) to the specified QoS group, and sets the traffic class priority and the bandwidth percentage for the packets in the traffic class."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "dcbx mode",
    "cmd": "dcbx mode MODE_NAME\nno dcbx mode\ndefault dcbx mode",
    "desc": "The dcbx mode command enables DCBX mode on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "no priority-flow-control",
    "cmd": "no priority-flow-control\ndefault priority-flow-control",
    "desc": "The no priority-flow-control and default priority-flow-control commands disable the priority flow control (PFC) on the configuration mode interface and restore the default packet drop setting on the interface, which takes effect when PFC is re-enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "priority-flow-control",
    "cmd": "priority-flow-control on\nno priority-flow-control on\ndefault priority-flow-control on",
    "desc": "The priority-flow-control command enables Priority Flow Control (PFC) on the configuration mode interface to pause selected traffic classes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "platform fm6000 pfc-wm",
    "cmd": "platform fm6000 pfc-wm [ RX-PRIVATE_SIZE ][ PFC-ON_WM ][ PFC-OFF_WM ]\nno platform fm6000 pfc-wm\ndefault platform fm6000 pfc-wm",
    "desc": "The platform fm6000 pfc-wm command configures the hardware buffer space allocated to the Priority Flow Control (PFC) RX-Private buffer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "priority-flow-control pause watchdog action",
    "cmd": "priority-flow-control pause watchdog action\nno priority-flow-control pause watchdog action",
    "desc": "The priority-flow-control pause watchdog action command either drops the traffic on a stuck queue, or error disables the port which has a stuck queue, or notifies if there is no action on the stuck queue."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "priority-flow-control pause watchdog default",
    "cmd": "priority-flow-control pause watchdog default\nno priority-flow-control pause watchdog default",
    "desc": "The priority-flow-control pause watchdog default command monitors all the egress queues which have guaranteed bandwidth enabled and for the priorities on which PFC is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "priority-flow-control pause watchdog hardware",
    "cmd": "priority-flow-control pause watchdog hardware\nno priority-flow-control pause watchdog hardware",
    "desc": "The priority-flow-control pause watchdog hardware command configures specific PFC priorities as non-disruptive."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "priority-flow-control priority",
    "cmd": "priority-flow-control priority pack-drop\nno priority-flow-control priority\ndefault priority-flow-control priority",
    "desc": "The priority-flow-control priority command configures the packet resolution setting on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show dcbx",
    "cmd": "show dcbx [INTERFACE]",
    "desc": "The show dcbx command list DCBX status and the interfaces on which DCBX is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show dcbx application-priority-configuration",
    "cmd": "show dcbx [INTERFACE] application-priority-configuration",
    "desc": "The show dcbx application-priority-configuration command displays the DCBX peer application priority configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show dcbx priority-flow-control-configuration",
    "cmd": "show dcbx [ INTERFACE ] priority-flow-control-configuration",
    "desc": "The show dcbx priority-flow-control-configuration command displays the IEEE DCBX peer priority flow control configurations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show dcbx status",
    "cmd": "show dcbx [INTERFACE] status",
    "desc": "The show dcbx status command displays the DCBX status on the interfaces on which DCBX is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces priority-flow-control",
    "cmd": "show interfaces [ INTERFACE ] priority-flow-control [ INFO_LEVEL ]",
    "desc": "The show interfaces priority-flow-control command displays the status of PFC on all interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform fm6000 pfc-wm",
    "cmd": "show platform fm6000 pfc-wm",
    "desc": "The show platform fm6000 pfc-wm command displays the buffer space allocated to the RX-Private buffer and buffer levels that trigger PFC frame transmission activities."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show priority-flow-control",
    "cmd": "show priority-flow-control [ status | counters | interfaces ]",
    "desc": "The show priority-flow-control command displays the status and other PFC and PFC watchdog information on all interfaces if no specific interface is specified."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "IP Address Locking",
    "cmd": "IP Address Locking",
    "desc": "EOS provides IP Address Locking capabilities when configured on an Ethernet Layer 2 port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "IP Address Locking Configuration",
    "cmd": "IP Address Locking Configuration",
    "desc": "This section describes IP Locking configuration tasks."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "IP Address Locking Commands",
    "cmd": "IP Address Locking Commands",
    "desc": "IP Address Locking Configuration Commands • address locking deny • address locking dhcp • address-locking disable • address locking lease query • address locking local-interface IP Address Locking Clear Commands"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "address locking deny",
    "cmd": "address locking deny ip_address",
    "desc": "Use the address locking command to block IPv4 and ARP packets with specific IPv4 addresses on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "address locking dhcp",
    "cmd": "address locking dhcp server ipv4 ip_address",
    "desc": "Use the address locking command to enter address locking mode and then dhcp to configure the DHCP server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "address-locking disable",
    "cmd": "address-locking disable",
    "desc": "The address-locking disable command disables IP Address Locking on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "address locking lease",
    "cmd": "lease ip_address mac ip_address",
    "desc": "Use the address locking command to enter the IPv4 and IPv6 locking mode and then on the switch, use the lease to configure DHCP leases."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "address locking lease query",
    "cmd": "lease query retry interval interval-time",
    "desc": "Use the address locking command to enter the IPv4 and IPv6 locking mode and then use the lease query retry interval to configure DHCP leases."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "address locking local-interface",
    "cmd": "address locking local-interface [Ethernet | Loopback | Management | Port Channel | Tunnel | Vlan]",
    "desc": "Use the address locking local-interface command to configure a local interface for IPv4 and IPv6 locking IP addresses on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "clear address locking lease",
    "cmd": "clear address locking lease all",
    "desc": "Use the clear address locking lease command to remove lease bindings at different granularities."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "locked-address expiration mac disabled",
    "cmd": "locked-address expiration mac disabled\nno locked-address expiration mac disabled\ndefault locked-address expiration mac disabled",
    "desc": "IP Address Locking, by default, removes authorization from leases after the corresponding MAC addresses age out."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "locked-address ipv4 enforcement disabled",
    "cmd": "locked-address ipv4 enforcement disabled\nno locked-address ipv4 enforcement disabled\ndefault locked-address ipv4 enforcement disabled",
    "desc": "The locked-address ipv4 enforcement disabled command disables address filtering for all ports with IPv4 Locking enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "locked-address ipv6 enforcement disabled",
    "cmd": "locked-address IPv6 enforcement disabled\nno locked-address IPv6 enforcement disabled\ndefault locked-address IPv6 enforcement disabled",
    "desc": "The locked-address ipv6 enforcement disabled command disables address filtering for all ports with IPv6 Locking enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "show address locking",
    "cmd": "show address locking",
    "desc": "Use the show address locking command to display the status of IP and IPv6 locking."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "show address locking counters",
    "cmd": "show address locking counters",
    "desc": "The show address locking counters command displays DHCP lease query messages sent, received, and dropped."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "any",
    "cmd": "any",
    "desc": "Ethernet49/1 IP DROP"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "c4:01:32:58:00:00",
    "cmd": "c4:01:32:58:00:00",
    "desc": "Ethernet49/1 IP PERMIT"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "show address locking table ipv4",
    "cmd": "show address locking table ipv4",
    "desc": "Use the show address locking table ipv4 command to display all DHCP leases with IP Locking, and the interfaces with authorized the IP addresses."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switch# show interface et1.1-2 status",
    "cmd": "mac address-table static 0000.000a.000a vlan 200 interface et1.1",
    "desc": "Port Name Status Vlan Duplex Speed Et1."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "ARP Inspection",
    "cmd": "ip arp inspection vlan 1 - 150",
    "desc": "The Address Resolution Protocol (ARP) inspection command ip arp inspection vlan activates a security feature that protects the network from ARP spoofing."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show arp agent",
    "cmd": "show arp agent [ipv4 | ipv6] [cache | dynamic | capacity | [interface interface]",
    "desc": "The show arp agent command displays the aggregate of all ARP entries that the CLI and other switch agents requested the ARP agent to install in EOS."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show ip arp inspection statistics",
    "cmd": "show ip arp inspection statistics [vlan [vid]|[interface] interface intf_slot | intf_port]",
    "desc": "The show ip arp inspection statistics command displays the statistics of inspected ARP packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show ip arp inspection vlan",
    "cmd": "show ip arp inspection vlan [list]",
    "desc": "The show ip arp inspection vlan command displays the configuration and operation state of ARP inspection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "show ip dhcp relay counters",
    "cmd": "show ip dhcp relay counters",
    "desc": "The show ip dhcp relay counters command displays the number of DHCP packets received, forwarded, or dropped on the switch and on all interfaces enabled as DHCP relay agents."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "show ip dhcp relay",
    "cmd": "show ip dhcp relay",
    "desc": "The show ip dhcp relay command displays the DHCP relay agent configuration status on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "show ip dhcp snooping counters",
    "cmd": "show ip dhcp snooping counters [counter_typedebug]",
    "desc": "The show ip dhcp snooping counters command displays counters that track the quantity of DHCP request and reply packets received by the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "show ip dhcp snooping hardware",
    "cmd": "show ip dhcp snooping hardware",
    "desc": "The show ip dhcp snooping hardware command displays internal hardware DHCP snooping status on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "show ip dhcp snooping",
    "cmd": "show ip dhcp snooping",
    "desc": "The show ip dhcp snooping command displays the DHCP snooping configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip interface",
    "cmd": "show ip interface [interface_name] [vrf_inst]",
    "desc": "The show ip interface command displays the status of specified interfaces that are configured as routed ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip interface brief",
    "cmd": "show ip interface [interface_name] [vrf_inst] brief",
    "desc": "Use the show ip interface brief command output to display the status summary of the specified interfaces that are configured as routed ports."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ip route",
    "cmd": "show ip route [vrf_instance][address][route_type][info_level][prefix]",
    "desc": "The show ip route command displays routing table entries that are in the Forwarding Information Base (FIB), including static routes, routes to directly connected networks, and dynamically learned routes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ip route age",
    "cmd": "show ip route address age",
    "desc": "The show ip route age command displays the time when the route for the specified network was present in the routing table."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ip route gateway",
    "cmd": "show ip route [vrf_instance] gateway",
    "desc": "The show ip route gateway command displays IP addresses of all gateways (next hops) used by active routes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Static and Default IPv4 Routes",
    "cmd": "Static and Default IPv4 Routes",
    "desc": "Static routes are entered through the CLI and are typically used when dynamic protocols cannot establish routes to a specified destination prefix."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Dynamic IPv4 Routes",
    "cmd": "Dynamic IPv4 Routes",
    "desc": "Dynamic routing protocols establish dynamic routes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "to cpu",
    "cmd": "to cpu",
    "desc": "B A R A R A B B A R"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "on Vlan2000",
    "cmd": "on Vlan2000",
    "desc": "Vlan3020 switch>"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "on Vlan2901",
    "cmd": "on Vlan2901",
    "desc": "Vlan3020 switch>"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "on Vlan2902",
    "cmd": "on Vlan2902",
    "desc": "Vlan3020 switch>"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "via 172.17.254.20 on Vlan3003",
    "cmd": "via 172.17.254.20 on Vlan3003",
    "desc": "via 172.17.254.67 on Vlan3008 via 172.17.254.98 on Vlan3492 via 172.17.254.86 on Vlan3884 via 172.17.253.2 on Vlan3000 F"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "via 172.25.0.1 on Vlan101",
    "cmd": "via 172.25.0.1 on Vlan101",
    "desc": "F"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "via 172.17.254.29 on Vlan3910",
    "cmd": "via 172.17.254.29 on Vlan3910",
    "desc": "F"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "via 172.17.254.33 on Vlan3911",
    "cmd": "via 172.17.254.33 on Vlan3911",
    "desc": "F"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "via 172.17.254.105 on Vlan3912 switch#",
    "cmd": "via 172.17.254.105 on Vlan3912 switch#",
    "desc": "Vlan3020 switch>"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Functions Supported for Arista Switches",
    "cmd": "BGP Functions Supported for Arista Switches",
    "desc": "Arista switches support these BGP functions: • A single BGP instance • Simultaneous internal (IBGP) and external (EBGP) peering • Multiprotocol BGP • BGP Confederations"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Route Management",
    "cmd": "Route Management",
    "desc": "When enabling routing, the switch discovers the best route to a packet destination address by exchanging routing information with other devices."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Route Redistribution",
    "cmd": "Route Redistribution",
    "desc": "Route redistribution advertises connected (static) routes or routes established by other routing protocols into a dynamic routing protocol routing domain."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Show Commands",
    "cmd": "show ip hardware fib summary",
    "desc": "• The show ip hardware fib summary command displays the statistics of this RECMP deduping:"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "uRPF Operation",
    "cmd": "uRPF Operation",
    "desc": "Configure uRPF on interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "uRPF Configuration",
    "cmd": "interface vlan 17",
    "desc": "Enable Unicast Reverse Path Forwarding (uRPF) for IPv4 packets ingressing the configuration mode interface using the ip verify command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Default VRF",
    "cmd": "Default VRF",
    "desc": "EOS creates the default VRF automatically and you cannot renamed or configure it."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "rd (VRF configuration mode)",
    "cmd": "rd (VRF configuration mode)",
    "desc": "The rd command issued in VRF Configuration Mode is a legacy command supported for backward compatibility."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "Show Commands",
    "cmd": "show platform arad ip route summary",
    "desc": "Display the IPv4 route scale summary using the show platform arad ip route summary command in the Global Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "IP Source Guard",
    "cmd": "IP Source Guard",
    "desc": "IP Source Guard (IPSG) prevents IP spoofing attacks."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Nexthop Group Commands",
    "cmd": "Nexthop Group Commands",
    "desc": "Nexthop Commands • entry (Next-hop Group) • ip route nexthop-group • nexthop-group • size (Nexthop Group) • ttl (Next-hop Group) • tunnel-source (Next-hop Group) Nexthop Show Command • show nexthop-group"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "entry (Next-hop Group)",
    "cmd": "entry index tunnel-destination ipv4_address\nno entry index\ndefault entry index",
    "desc": "The entry command defines a next-hop entry in the nexthop group configuration mode ."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "ip route nexthop-group",
    "cmd": "ip route [VRF_INST dest_net nexthop-group nhgp_name [dist][TAG_OPTION][RT_NAME]\nno ip route [VRF_INST] dest_net [nexthop-group nhgroup_name][distance]\ndefault ip route [VRF_INST] dest_net [nexthop-group nhgroup_name][distance]",
    "desc": "The ip route nexthop-group command creates a static route."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "nexthop-group",
    "cmd": "nexthop-group group_name type TUNNEL_TYPE\nno nexthop-group [group_name][type TUNNEL_TYPE]\ndefault nexthop-group [group_name][typeTUNNEL_TYPE]",
    "desc": "The nexthop-group command places the switch in nexthop-group configuration mode, through which next-hop groups are created or modified."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show nexthop-group",
    "cmd": "show nexthop-group nhgroup_name [VRF_INST]",
    "desc": "The show nexthop-group command displays properties of the specified nexthop group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "size (Nexthop Group)",
    "cmd": "size entry_size\nno size entry_size\ndefault size entry_size",
    "desc": "The size command configures the quantity of next-hop entries in the Nexthop-Group Configuration Mode ."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ttl (Next-hop Group)",
    "cmd": "ttl hop_expiry\nno ttl hop_expiry\ndefault ttl hop_expiry",
    "desc": "The ttl command specifies the number entered into the TTL (time to live) encapsulation field of packets transmitted to the address designated by the configuration mode next-hop group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "tunnel-source (Next-hop Group)",
    "cmd": "tunnel-source SOURCE\nno tunnel-source SOURCE\ndefault tunnel-source SOURCE",
    "desc": "The tunnel-source command specifies the address that is entered into the source IP address encapsulation field of packets that are transmitted as designated by the nexthop group configuration mode ."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "tunnel nexthop-group unresolved",
    "cmd": "tunnel nexthop-group unresolved invalid\nno tunnel nexthop-group unresolved invalid\ndefault tunnel nexthop-group unresolved invalid",
    "desc": "The tunnel nexthop-group unresolved command in the Router General Configuration Mode installs a nexthop-group tunnel only if a viable nexthop group exists."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "sub-option 2 type string data “vendor\"",
    "cmd": "sub-option 2 type string data “vendor\"",
    "desc": "Configuring DHCP Server Subnets DHCP Server settings can also be configured per subnet and overrides the DHCP Server global mode configurations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "agent SandL3Unicast terminate",
    "cmd": "agent SandL3Unicast terminate",
    "desc": "The agent SandL3Unicast terminate command restarts the platform Layer 3 agent to ensure optimized IPv4 routes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "arp",
    "cmd": "arp [vrf_instance] ipv4_addr mac_addr arpa\nno arp [vrf_instance] ipv4_addr\ndefault arp [vrf_instance] ipv4_addr",
    "desc": "The arp command adds a static entry to an Address Resolution Protocol (ARP) cache."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "arp aging timeout",
    "cmd": "arp aging timeout arp_time\nno arp aging timeout\ndefault arp aging timeout",
    "desc": "The arp aging timeout command specifies the duration of dynamic address entries in the Address Resolution Protocol (ARP) cache for addresses learned through the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "arp cache dynamic capacity",
    "cmd": "ipv6 nd cache dynamic capacity capacity\nno arp cache dynamic capacity\ndefault arp cache dynamic capacity",
    "desc": "AARP and IPv6 Neighbor Discovery store neighbor address resolutions in a neighbor cache."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "arp cache persistent",
    "cmd": "arp cache persistent\nno arp cache persistent\ndefault arp cache persistent",
    "desc": "The arp cache persistent command restores the dynamic entries in the Address Resolution Protocol (ARP) cache after reboot."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "arp gratuitous accept",
    "cmd": "arp gratuitous accept\nno arp gratuitous accept\ndefault arp gratuitous accept",
    "desc": "The arp gratuitous accept command configures the configuration mode interface to accept gratuitous ARP request packets received on that interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "arp proxy max-delay",
    "cmd": "arp proxy max-delay milliseconds",
    "desc": "The arp proxy max-delay command enables delaying proxy ARP requests on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "balance factor",
    "cmd": "balance factor factor_value\nno balance factor factor_value",
    "desc": "The balance factor command in the Port Group Host Configuration Mode configures port balancing for Cluster Load Balancing on the network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "clear arp inspection statistics",
    "cmd": "clear arp inspection statistics",
    "desc": "The clear arp inspection statistics command clears ARP inspection statistics."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "clear arp",
    "cmd": "clear arp [vrf_instance] ipv4_addr",
    "desc": "The clear arp command removes the specified dynamic ARP entry for the specified IP address from the Address Resolution Protocol (ARP) table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "clear arp-cache",
    "cmd": "clear arp-cache [vrf_instance][interface_name]",
    "desc": "The clear arp-cache command refreshes dynamic entries in the Address Resolution Protocol (ARP) cache."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "clear ip dhcp relay counters",
    "cmd": "clear ip dhcp relay counters [interface_name]",
    "desc": "The clear ip dhcp relay counters command resets the DHCP relay counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "clear ip dhcp snooping counters",
    "cmd": "clear ip dhcp snooping counters [counter_type]",
    "desc": "The clear ip dhcp snooping counters command resets the DHCP snooping packet counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "clear ip multicast count",
    "cmd": "clear ip multicast count [group_address [source_address]]",
    "desc": "The clear ip multicast count command clears all counters associated with the multicast traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "clear snapshot counters ecmp",
    "cmd": "clear snapshot counters ecmp req_id_range",
    "desc": "The clear shapshot counters ecmp deletes previous snapshots."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "cli vrf",
    "cmd": "cli vrf [vrf_id]",
    "desc": "The cli vrf command specifies the context-active VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "compress",
    "cmd": "ip hardware fib optimize prefix-length prefix-length expand prefix-length compress\nno ip hardware fib optimize prefix-length prefix-length expand prefix-length compress",
    "desc": "The compress command increases the hardware resources available for the specified prefix lengths."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "destination grouping",
    "cmd": "destination groupings [bgp field-set] [prefix length length] [vtep]\nno destination groupings [bgp field-set] [prefix length length] [vtep]",
    "desc": "The destination grouping command in the Cluster Load Balancing Configuration mode allows the configuration of destination grouping settings with BGP, prefix, or VTEP groupings for cluster load balancing."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp relay",
    "cmd": "dhcp relay\nno dhcp relay",
    "desc": "The dhcp relay command places the switch in the DHCP relay mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server",
    "cmd": "dhcp server\nno dhcp server",
    "desc": "The dhcp server command places the switch in the DHCP relay mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server client",
    "cmd": "dhcp server client class [ipv4|ipv6] definition client_class assignments [defaultgateway|dns|lease|option|private-option|tftp]",
    "desc": "The dhcp server client command configures client options for the DHCP server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server debug",
    "cmd": "dhcp server debug log file",
    "desc": "The dhcp server debug log command configures DHCP server debugging configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server dns",
    "cmd": "dhcp server dns [domain name domain_name ] [server [ipv4|ipv6] ip_address",
    "desc": "The dhcp server dns command configures DHCP server DNS options."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server lease",
    "cmd": "dhcp server lease time [ipv4|ipv6] days days hourshours minutesminutes",
    "desc": "The dhcp server lease command configures DHCP server lease options."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server option",
    "cmd": "dhcp server option [ipv4|ipv6] code [always-send data type [hex |string]",
    "desc": "The dhcp server option command configures DHCP server options."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server private-option",
    "cmd": "dhcp server private-option [ipv4|ipv6] code [always-send data type [hex |",
    "desc": "The dhcp server private-option command configures DHCP server private options."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server subnet",
    "cmd": "dhcp server subnet ipv4_address ipv6_address",
    "desc": "The dhcp server subnet command configures DHCP server subnet options."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server subnet client",
    "cmd": "dhcp server subnet [ipv4|ipv6] client class definition client_class [defaultgateway|dns|lease|name|range|reservations|tftp]",
    "desc": "The dhcp server subnet [ipv4 | ipv6] client command configures client options for the DHCP server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server tftp",
    "cmd": "dhcp server tftp server [file [ipv4|ipv6] file_name] [option [150|66]] ipv4",
    "desc": "The dhcp server tftp command configures DHCP server TFTP options."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server vendor-option",
    "cmd": "dhcp server vendor-option ipv4 vendor_id default vendor_id sub-option suboption_code",
    "desc": "The dhcp server vendor-option command configures the DHCP server vendor identifier options."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "dhcp server vendor-option ipv4 sub-option",
    "cmd": "ip_address [string data quoted_string",
    "desc": "The dhcp server vendor-option command configures the DHCP server vendor identifier options."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "fib route limit",
    "cmd": "router general",
    "desc": "The fib route limit command in the Router General Configuration Mode limits the number of routes added to the Forwarding Information Database (FIB) and also suppresses BGP routes when exceeding the table limit."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "flow",
    "cmd": "flow [counters] [match encapsulation [none | vxlan] ipv4] [monitor]\nno flow [counters] [match encapsulation [none | vxlan] ipv4] [monitor]",
    "desc": "The flow command in the Cluster Load Balancing Configuration Mode allows the configuration of flow settings for Cluster Load Balancing including counters, matching, monitoring, sources, and warnings."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "flow exhaustion",
    "cmd": "flow exhaustion action [dscp dscp_value] [traffic-class class_value\nno flow exhaustion action [dscp dscp_value] [traffic-class class_value",
    "desc": "The flow exhaustion command in the Port Group Host Configuration Mode configures flow-related settings for cluster load balancing on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "flow source learning",
    "cmd": "flow source learning\nno flow source learning",
    "desc": "The flow source learning command enters the Flow Source Learning Configuration Mode and configures cluster load balancing to learn flow sources."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "flow limit",
    "cmd": "flow limit max_flows learning max_flows\nno flow limit max_flows learning max_flows",
    "desc": "The flow limit command in the Port Group Host Configuration Mode configures flow-related settings for cluster load balancing on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "flow warning",
    "cmd": "flow warning threshold_flows\nno flow warning threshold_flows",
    "desc": "The flow warning command in the Port Group Host Configuration Mode configures flow warning thresholds for cluster load balancing on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "forwarding type",
    "cmd": "forwarding type routed\nno forwarding type routed",
    "desc": "The forwarding type command configures the encapsulation and mode used to deliver packets between TORs over the uplinks."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "interface tunnel",
    "cmd": "interface tunnel number\nno interface tunnel number",
    "desc": "The interface tunnel command places the switch in Interface-Tunnel Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "ip arp inspection limit",
    "cmd": "ip arp inspection limit [ rate pps] [burst_interval sec | none]\nno ip arp inspection limit [ rate pps] [burst_interval sec | none]\ndefault ip arp inspection limit [ rate pps] [burst_interval sec | none]",
    "desc": "The ip arp inspection limit command disables the interface if the incoming ARP rate exceeds the configured value rate limit of the incoming ARP packets on an interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "ip arp inspection logging",
    "cmd": "ip arp inspection logging [rate pps ][burst_interval sec | none]\nno ip arp inspection logging [RATE pps ][burst_interval sec | none]\ndefault ip arp inspection logging [RATE pps ][burst_interval sec | none]",
    "desc": "The ip arp inspection logging command enables logging of incoming ARP packets on the interface if the rate exceeds the configured value."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Security",
    "title": "ip arp inspection trust",
    "cmd": "ip arp inspection trust\nno ip arp inspection trust\ndefault ip arp inspection trust",
    "desc": "The ip arp inspection trust command configures the trust state of an interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "ip arp inspection vlan",
    "cmd": "ip arp inspection vlan [list]",
    "desc": "The ip arp inspection vlan command enables ARP inspection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ip dhcp relay all-subnets",
    "cmd": "ip dhcp relay all-subnets\nno ip dhcp relay all-subnets\ndefault ip dhcp relay all-subnets",
    "desc": "The ip dhcp relay all-subnets command configures the DHCP smart relay status in the Interface Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ip dhcp relay all-subnets default",
    "cmd": "ip dhcp relay all-subnets default\nno ip dhcp relay all-subnets default\ndefault ip dhcp relay all-subnets default",
    "desc": "The ip dhcp relay all-subnets default command configures the global DHCP smart relay setting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ip dhcp relay always-on",
    "cmd": "ip dhcp relay always-on\nno ip dhcp relay always-on\ndefault ip dhcp relay always-on",
    "desc": "The ip dhcp relay always-on command enables the DHCP relay agent on the switch regardless of the DHCP relay agent status on any interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ip dhcp relay information option (Global)",
    "cmd": "ip dhcp relay information option\nno ip dhcp relay information option\ndefault ip dhcp relay information option",
    "desc": "The ip dhcp relay information option command configures the switch to attach tags to DHCP requests before forwarding them to the DHCP servers designated by the ip helper-address commands."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ip dhcp relay information option circuit-id",
    "cmd": "ip dhcp relay information option circuit-id id_label\nno ip dhcp relay information option circuit-id\ndefault ip dhcp relay information option circuit-id",
    "desc": "The ip dhcp relay information option circuit-id command specifies the content of tags that the switch attaches to DHCP requests before forwarding them from the configuration mode interface to DHCP server addresses specified by ip helper-address commands."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ip dhcp snooping",
    "cmd": "ip dhcp snooping\nno ip dhcp snooping\ndefault ip dhcp snooping",
    "desc": "The ip dhcp snooping command enables DHCP snooping globally on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ip dhcp snooping bridging",
    "cmd": "ip dhcp snooping bridging\nno ip dhcp snooping bridging",
    "desc": "The ip dhcp snooping bridging command enables the DHCP snooping bridging configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ip dhcp snooping information option",
    "cmd": "ip dhcp snooping information option\nno ip dhcp snooping information option\ndefault ip dhcp snooping information option",
    "desc": "The ip dhcp snooping information option command enables the insertion of option-82 DHCP snooping information in DHCP packets on VLANs where you have DHCP snooping enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "ip dhcp snooping vlan",
    "cmd": "ip dhcp snooping vlan v_range\nno ip dhcp snooping vlan v_range\ndefault ip dhcp snooping vlan v_range",
    "desc": "The ip dhcp snooping vlan command enables DHCP snooping on specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip hardware fib ecmp resilience",
    "cmd": "ip hardware fib ecmp resilience net_addr capacity nhop_max redundancy duplicates\nno ip hardware fib ecmp resilience net_addr\ndefault ip hardware fib ecmp resilience net_addr",
    "desc": "The ip hardware fib ecmp resilience command enables resilient ECMP for the specified IP address prefix and configures a fixed number of next hop entries in the hardware ECMP table for that prefix."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip hardware fib load-balance distribution",
    "cmd": "ip hardware fib load-balance distribution [dynamic | hash] average-trafficweight average_traffic_weight_value flow-set-size flow_set_size_value inactivity\ninactivity_value sampling-period sampling_period seed hash_seed member-selection",
    "desc": "The ip hardware fib load-balance distribution command allows the configuration of dynamic load balancing (DLB) on ECMP Groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip hardware fib next-hop resource optimization",
    "cmd": "ip hardware fib next-hop resource optimization options\nno ip hardware fib next-hop resource optimization options",
    "desc": "The ip hardware fib next-hop resource optimization command enables or disables the resource optimization features on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip hardware fib optimize",
    "cmd": "ip hardware fib optimize exact-match prefix-length prefix-length prefix-length",
    "desc": "The ip hardware fib optimize command enables IPv4 route scale."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip hardware fib optimize prefixes",
    "cmd": "ip hardware fib optimize vrf vrf_name prefixes minimum count num_prefixes\nno ip hardware fib optimize vrf vrf_name prefixes minimum count num_prefixes",
    "desc": "The ip hardware fib optimize prefixes command in the Global Configuration Mode reserves IPv4 optimized prefixes on the default and non-default VRFs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip helper-address",
    "cmd": "ip helper-address ipv4_addr [vrf vrf_name][source-address ipv4_addr | source-interface interfaces]\nno ip helper-address [ipv4_addr]\ndefault ip helper-address [ipv4_addr]",
    "desc": "The ip helper-address command enables the DHCP relay agent on the Interface Configuration Mode and specifies a forwarding address for DHCP requests."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip icmp redirect",
    "cmd": "ip icmp redirect\nno ip icmp redirect\ndefault ip icmp redirect",
    "desc": "The ip icmp redirect command enables the transmission of ICMP redirect messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip load-sharing",
    "cmd": "ip load-sharing hardware seed\nno ip load-sharing hardware\ndefault ip load-sharing hardware",
    "desc": "The ip load-sharing command provides the hash seed to an algorithm the switch uses to distribute data streams among multiple equal-cost routes to an individual IPv4 subnet."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip local-proxy-arp",
    "cmd": "ip local-proxy-arp\nno ip local-proxy-arp\ndefault ip local-proxy-arp",
    "desc": "The ip local-proxy-arp command enables local proxy ARP (Address Resolution Protocol) in the Interface Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip multicast count",
    "cmd": "ip multicast count [group_address [source_address] | bytes | packets]\nno ip multicast count [group_address [source_address] | bytes | packets]\ndefault ip multicast count [group_address [source_address] | bytes | packets]",
    "desc": "The ip multicast count command enables the IPv4 multicast route traffic counter of group and source addresses in either bytes or packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip proxy-arp",
    "cmd": "ip proxy-arp\nno ip proxy-arp\ndefault ip proxy-arp",
    "desc": "The ip proxy-arp command enables proxy ARP in the Interface Configuration Mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "ip route",
    "cmd": "ip route [vrf_instance] dest_net next-hop [distance][tag_varname][rt_name]\nno ip route [vrf_instance] dest_net [next-hop][distance]\ndefault ip route [vrf_instance] dest_net [next-hop][distance]",
    "desc": "The ip route command creates a static route."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip routing",
    "cmd": "ip routing [vrf_instance]\nno ip routing [delete_routes][vrf_instance\ndefault ip routing [delete_routes][vrf_instance]",
    "desc": "The ip routing command enables IPv4 routing."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "ip source binding",
    "cmd": "ip source binding [ip_address][mac_address] vlan [vlan_range] interface [interface]\nno ip source binding [ip_address][mac_address] vlan [vlan_range] interface [interface]\ndefault ip source binding [ip_address][mac_address] vlan [vlan_range] interface [interface]",
    "desc": "Layer 2 Port-Channels support IP source guard (IPSG), not member ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "ip verify source",
    "cmd": "ip verify source vlan [vlan_range]\nno ip verify source [vlan_range]\ndefault ip verify source",
    "desc": "The ip verify source command configures IP source guard (IPSG) applicable only to Layer 2 ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip verify",
    "cmd": "ip verify unicast source reachable-via rpf_mode\nno ip verify unicast\ndefault ip verify unicast",
    "desc": "The ip verify command configures Unicast Reverse Path Forwarding (uRPF) for inbound IPv4 packets on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv4 routable 240.0.0.0/4",
    "cmd": "ipv4 routable 240.0.0.0/4\nno ipv4 routable 240.0.0.0/4\ndefault ipv4 routable 240.0.0.0/4",
    "desc": "The ipv4 routable 240."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "load-balance cluster",
    "cmd": "load-balance cluster\nno load-balance cluster",
    "desc": "The load-balance cluster command enters the Cluster Load Balancing (CLB) Configuration Mode and configure parameters for cluster load-balancing on a network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "load-balance method",
    "cmd": "load-balance method [flow round-robin] [spine port-index]\nno load-balance method [flow round-robin] [spine port-index]",
    "desc": "The load-balance command in the Cluster Load Balancing Configuration Mode configures the method of load-balancing traffic on the cluster."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "member Ethernet",
    "cmd": "member Ethernet interface_number\nno member Ethernet interface_number",
    "desc": "The member Ethernet command in the Port Group Host Configuration Mode configures per port hardware interfaces for cluster load balancing on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "platform barefoot bfrt vrf",
    "cmd": "platform barefoot bfrt vrf vrf_name",
    "desc": "The platform barefoot bfrt vrf command configures the forwarding plane agent on supported platforms to restart and listen on the configured VRF for connections."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "platform trident forwarding-table partition",
    "cmd": "platform trident forwarding-table partition size\nno platform trident forwarding-table partition\ndefault platform trident forwarding-table partition",
    "desc": "The platform trident forwarding-table partition command provides a shared table memory for L2, L3 and algorithmic LPM entries that can be partitioned in different ways."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "platform trident routing-table partition",
    "cmd": "platform trident routing-table partition size\nno platform trident routing-table partition\ndefault platform trident routing-table partition",
    "desc": "The platform trident routing-table partition command manages the partition sizes for the hardware LPM table that stores IPv6 routes of varying sizes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "port group host",
    "cmd": "port group host word\nno port group host word",
    "desc": "The port group host command enters the Port Group Host Configuration mode and configures additional port parameters for Cluster Load Balancing by identifying the ports connected to the GPU server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "rib fib policy",
    "cmd": "rib [ipv4 | ipv6] fib policy name\nno rib [ipv4 | ipv6] fib policy name\ndefault rib [ipv4 | ipv6] fib policy name",
    "desc": "The rib fib policy command enables FIB policy for a particular VRF under router general configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show arp",
    "cmd": "show arp [vrf_inst][format][host_addr][host_name][intf][mac_addr][data]",
    "desc": "The show arp command displays all ARP tables."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "show dhcp server",
    "cmd": "show dhcp server [ipv4 | ipv6 | leases | vrf]",
    "desc": "Use the show dhcp server command to display DHCP server information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "show dhcp server leases",
    "cmd": "show dhcp server leases [ipv4 | ipv6]",
    "desc": "Use the show dhcp server leases command to display DHCP server lease information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show hardware capacity",
    "cmd": "show hardware capacity",
    "desc": "The show hardware capacity command displays the utilization of the hardware resources:"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show hardware resource DlbEcmpGroupTable agent *",
    "cmd": "show hardware resource DlbEcmpGroupTable agent *",
    "desc": "The following platforms use the show hardware resource DlbEcmpGroupTable agent * command: • DCS-7050CX4 • DCS-7050DX4-32S-F • DCS-7050PX4-32S-F • DCS-7050SDX4 • DCS-7050SPX4 • 7358X4-SC"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show hardware resource l3 summary",
    "cmd": "show hardware resource l3 summary",
    "desc": "The show hardware resource l3 summary command displays a summary of used hardware entries and the total available capacity for Layer 3 features such as next-hops and ECMP groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interface tunnel",
    "cmd": "show interface tunnel number",
    "desc": "The show interface tunnel command displays the interface tunnel information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip",
    "cmd": "show ip",
    "desc": "The show ip command displays IPv4 routing, IPv6 routing, IPv4 multicast routing, and VRRP status on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip arp",
    "cmd": "show ip arp [vrf_inst][format][host_addr][host_name][intf][mac_addr][data]",
    "desc": "The show ip arp command displays ARP cache entries that map an IPv4 address to a corresponding MAC address."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show ip route host",
    "cmd": "show ip route [vrf_instance] host",
    "desc": "The show ip route host command displays all host routes in the host forwarding table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "via 172.17.254.105 on Vlan3912 switch>",
    "cmd": "via 172.17.254.105 on Vlan3912 switch>",
    "desc": "Vlan3992 switch>"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show ip route match tag",
    "cmd": "show ip route [vrf_instance] address match tag",
    "desc": "The show ip route match tag command displays the route tag assigned to the specified IPv4 address or subnet."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show ip route summary",
    "cmd": "show ip route [vrf_instance] summary",
    "desc": "The show ip route summary command displays the number of routes, categorized by destination prefix, in the routing table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show ip verify source",
    "cmd": "show ip verify source [vlan | detail]",
    "desc": "The show ip verify source command displays the IP source guard (IPSG) configuration, operational states, and IP-MAC binding entries for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show platform arad ip route",
    "cmd": "show platform arad ip route",
    "desc": "The show platform arad ip route command shows resources for all IPv4 routes in hardware."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show platform barefoot bfrt",
    "cmd": "show platform barefoot bfrt",
    "desc": "The show platform barefoot bfrt command displays information about the current BfRuntime server configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show platform fap eedb ip-tunnel gre interface tunnel",
    "cmd": "show platform fap eedb ip-tunnel gre interface tunnel number",
    "desc": "The show platform fap eedb ip-tunnel gre interface tunnel command verifies the tunnel encapsulation programming for the tunnel interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show platform fap tcam summary",
    "cmd": "show platform fap tcam summary",
    "desc": "The show platform fap tcam summary command displays information about the TCAM bank that is allocated for GRE packet termination lookup."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show platform trident forwarding-table partition",
    "cmd": "show platform trident forwarding-table partition\nshow platform trident forwarding-table partition flexible",
    "desc": "The show platform trident forwarding-table partition command displays the size of the L2 MAC entry tables, L3 IP forwarding tables, and Longest Prefix Match (LPM) routes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show platform trident l3 shadow dlb-ecmp-group-control",
    "cmd": "show platform trident l3 shadow dlb-ecmp-group-control",
    "desc": "The show platform trident l3 shadow dlb-ecmp-group-control displays information about Dynamic Load Balancing with ECMP groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show rib route ip",
    "cmd": "show rib route ip [vrf vrf_name][prefix][route_type]",
    "desc": "The show rib route ip command displays a list of IPv4 Routing Information Base (RIB) routes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show rib route fib policy excluded",
    "cmd": "show rib route [ipv4 | ipv6] fib policy excluded",
    "desc": "The show rib route fib policy excluded command displays the RIB routes filtered by FIB policy."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show rib route summary",
    "cmd": "show rib route summary [info_level]",
    "desc": "The show rib route summary command displays information about the routes present in the Routing Information Base."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show routing-context vrf",
    "cmd": "show routing-context vrf",
    "desc": "The show routing-context vrf command displays the context-active VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show snapshot counters ecmp history",
    "cmd": "show snapshot counters ecmp history",
    "desc": "The show snapshot counters ecmp history displays information about the AGM configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show tunnel fib static interface gre",
    "cmd": "show tunnel fib static interface gre number",
    "desc": "The show tunnel fib static interface gre command displays the Forwarding Information Base (FIB) information for a static interface GRE tunnel."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "show vrf",
    "cmd": "show vrf [vrf_instance]",
    "desc": "The show vrf command displays the VRF name, RD, supported protocols, state and included interfaces for the specified VRF or for all VRFs on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "start snapshot counters",
    "cmd": "start snapshot counters ecmp poll interval interval [milliseconds | microseconds] duration duration\nseconds destination_url",
    "desc": "The start snapshot counters ecmp allows the monitoring of packets and bytes traversing the members of the configured ECMP groups on the switch with a high time resolution."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "tcp mss ceiling",
    "cmd": "tcp mss ceiling {ipv4 segment size | ipv6 segment size}{egress | ingress}\nno tcp mss ceiling\ndefault tcp mss ceiling",
    "desc": "The tcp mss ceiling command configures the Maximum Segment Size (MSS) limit in the TCP header on the configuration mode interface and enables TCP MSS clamping."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "tunnel",
    "cmd": "tunnel options\nno tunnel options",
    "desc": "The tunnel command configures options for protocol-over-protocol tunneling."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "vrf (Interface mode)",
    "cmd": "vrf [vrf_name]\nno vrf [vrf_name]\ndefault vrf [vrf_name]",
    "desc": "The vrf command adds the configuration mode interface to the specified VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "vrf instance",
    "cmd": "vrf instance [vrf_name]\nno vrf instance [vrf_name]\ndefault vrf instance [vrf_name]",
    "desc": "The vrf instance command places the switch in VRF configuration mode for the specified VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "IPv6",
    "cmd": "IPv6",
    "desc": "EOS supports Internet Protocol version 4 (IPv4) and Internet Protocol version 6 (IPv6) for routing packets across network boundaries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "IPv6 Description",
    "cmd": "IPv6 Description",
    "desc": "Internet Protocol version 6 (IPv6) consists of a communications protocol used for relaying network packets across a set of connected networks using the Internet Protocol suite."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "IPv6 Address Format",
    "cmd": "IPv6 Address Format",
    "desc": "IPv6 addresses have 128 bits, represented by eight 16-bit hexadecimal numbers separated by colons."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "IPv6 DHCP Snooping",
    "cmd": "IPv6 DHCP Snooping",
    "desc": "Dynamic Host Configuration Protocol (DHCP) snooping is a Layer 2 feature that is configured on LAN switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Neighbor Discovery Protocol",
    "cmd": "Neighbor Discovery Protocol",
    "desc": "The Neighbor Discovery Protocol (RFC 4861) operates with IPv6 to facilitate the following tasks for nodes within a specified prefix space: • Auto-configuring a node IPv6 address."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "IPv6 Duplicate Address Detection Proxy",
    "cmd": "IPv6 Duplicate Address Detection Proxy",
    "desc": "Overview IPv6 Duplicate Address Detection Proxy ensures that all IPv6 addresses assigned on a network segment are unique."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "IPv6 ECMP",
    "cmd": "ipv6 hardware fib ecmp resilience 2001:db8:0::/64 capacity 5 redundancy 3",
    "desc": "Multiple routes configured to the same destination with the same administrative distance comprise an Equal Cost Multi-Path (ECMP) route."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "IPv6 Neighbor Discovery",
    "cmd": "IPv6 Neighbor Discovery",
    "desc": "The IPv6 Neighbor Discovery protocol defines a method for nodes to perform the following network maintenance tasks: • Determine Layer 2 addresses for neighbors known to reside on attached links."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Router Advertisement Interval",
    "cmd": "interface vlan 200",
    "desc": "The ipv6 nd ra interval command configures the interval between IPv6 RA transmissions from the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "Router Advertisement Flag Configuration",
    "cmd": "Router Advertisement Flag Configuration",
    "desc": "The following commands set the specified configuration flag in IPv6 RAs transmitted from the configuration mode interface: • The ipv6 nd managed-config-flag command sets the managed address configuration flag."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "IPv6 DHCP Relay Status",
    "cmd": "interface ethernet 1/2",
    "desc": "The show ip dhcp relay command displays the status of DHCP relay agent parameters on the switch and each interface where at least one feature parameter is listed."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "IPv6 DHCP Relay Counters",
    "cmd": "show ipv6 dhcp relay counters",
    "desc": "The show ipv6 dhcp relay counters command displays the number of DHCP packets received, forwarded, or dropped on the switch and on all interfaces enabled as DHCP relay agents."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "IPv6 Commands",
    "cmd": "IPv6 Commands",
    "desc": "Global Configuration Commands • ipv6 dhcp relay always-on • ipv6 dhcp relay option link-layer address • ipv6 hardware fib aggregate-address • ipv6 hardware fib ecmp resilience • ipv6 hardware fib nexthop-index"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "clear ipv6 dhcp relay counters",
    "cmd": "clear ipv6 dhcp relay counters [port]",
    "desc": "The clear ipv6 dhcp relay counters command resets the DHCP relay counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "clear ipv6 dhcp snooping counters",
    "cmd": "clear ipv6 dhcp snooping counters [counter_type]",
    "desc": "The clear ipv6 dhcp snooping counters command resets the DHCP snooping packet counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "clear ipv6 neighbors",
    "cmd": "clear ipv6 neighbors [port][dynamic_ipv6]",
    "desc": "The clear ipv6 neighbors command removes the specified dynamic IPv6 neighbor discovery cache entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "ipv6 address",
    "cmd": "ipv6 address [ ipv6_address | ipv6_prefix | auto-config ]\nno ipv6 address { ipv6_address | ipv6_prefix | auto-config }\ndefault ipv6 address { ipv6_address | ipv6_prefix | auto-config }",
    "desc": "The ipv6 address command assigns a global IPv6 address to the IPv6 interface, and defines the prefix length."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ipv6 dhcp relay always-on",
    "cmd": "ipv6 dhcp relay always-on\nno ipv6 dhcp relay always-on\ndefault ipv6 dhcp relay always-on",
    "desc": "The iv6p dhcp relay always-on command enables the switch DHCP relay agent on the switch regardless of the DHCP relay agent status on any interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ipv6 dhcp relay destination",
    "cmd": "ipv6 dhcp relay destination [ipv6_addr][source-address ipv6_addr]\nno ipv6 dhcp relay destination [ipv6_addr]\ndefault ipv6 dhcp relay destination [ipv6_addr]",
    "desc": "The ipv6 dhcp relay destination command enables the DHCPv6 relay agent and sets the destination address on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ipv6 dhcp relay option link-layer address",
    "cmd": "ipv6 dhcp relay option link-layer address\nno ipv6 dhcp relay option link-layer address\ndefault ipv6 dhcp relay option link-layer address",
    "desc": "The ipv6 dhcp relay option link-layer address command enables the DHCPv6 relay agent to configure the client link layer address option to solicit and request messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ipv6 dhcp relay option remote-id",
    "cmd": "ipv6 dhcp relay option remote-id format {%m:%h:%p | %m:%i | %m:%p}\nno ipv6 dhcp relay option remote-id format {%m:%h:%p | %m:%i | %m:%p}",
    "desc": "The ipv6 dhcp relay option command configures DHCPv6 Relay Option 37, Remote-ID, to add the MAC address, interface ID or name, and hostname as the remote-id format."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 enable",
    "cmd": "ipv6 enable\nno ipv6 enable\ndefault ipv6 enable",
    "desc": "The ipv6 enable command enables IPv6 on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 hardware fib aggregate-address",
    "cmd": "ipv6 hardware fib aggregate-address ipv6_prefix summary-only software-forward\nno ipv6 hardware fib aggregate-address ipv6_prefix\ndefault ipv6 hardware fib aggregate-address ipv6_prefix",
    "desc": "The ipv6 hardware fib aggregate-address command specifies the routing table repository of specified IPv6 route."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 hardware fib ecmp resilience",
    "cmd": "ipv6 hardware fib ecmp resilience net_prfx capacity nhop_max redundancy duplicates\nno ipv6 hardware fib ecmp resilience net_addr\ndefault ipv6 hardware fib ecmp resilience net_addr",
    "desc": "The ip hardware fib ecmp resilience command configures a fixed number of next hop entries in the hardware ECMP table for the specified IPv6 address prefix."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 hardware fib nexthop-index",
    "cmd": "ipv6 hardware fib nexthop nxthop_index [PREFIX]\nno ipv6 hardware fib nexthop\ndefault ipv6 hardware fib nexthop",
    "desc": "The ipv6 hardware fib nexthop-index command deterministically selects the next hop used for ECMP routes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 nd dad proxy",
    "cmd": "ipv6 nd dad proxy",
    "desc": "IPv6 DAD Proxy can be configured on an interface, and you must configure an IPv6 address on the interface and then enable IPv6 on the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "ipv6 nd managed-config-flag",
    "cmd": "ipv6 nd managed-config-flag\nno ipv6 nd managed-config-flag\ndefault ipv6 nd managed-config-flag",
    "desc": "The ipv6 nd managed-config-flag command causes the managed address configuration flag to be set in IPv6 RA packets transmitted from the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 nd ns-interval",
    "cmd": "ipv6 nd ns-interval period\nno ipv6 nd ns-interval\ndefault ipv6 nd ns-interval",
    "desc": "The ipv6 nd ns-interval command configures the interval between IPv6 Neighbor Solicitation (NS) transmissions from the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "ipv6 nd other-config-flag",
    "cmd": "ipv6 nd other-config-flag\nno ipv6 nd other-config-flag\ndefault ipv6 nd other-config-flag",
    "desc": "The ipv6 nd other-config-flag command configures the configuration mode interface to send IPv6 RAs with the other stateful configuration flag set."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 nd prefix",
    "cmd": "ipv6 nd prefix ipv6_prefix LIFETIME [FLAGS]\nipv6 nd prefix ipv6_prefix no-advertise\nno ipv6 nd prefix ipv6_prefix\ndefault ipv6 nd prefix ipv6_prefix",
    "desc": "The ipv6 nd prefix command configures neighbor discovery Router Advertisements (RAs) prefix inclusion for RAs sent from the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 nd ra disabled",
    "cmd": "ipv6 nd ra disabled [SCOPE]\nno ipv6 nd ra disabled\ndefault ipv6 nd ra disabled",
    "desc": "The ipv6 nd ra disabled command suppress IPv6 Router Advertisement (RA) transmissions on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ipv6 nd ra dns-server",
    "cmd": "ipv6 nd ra dns-server ipv6_addr SERVER_LIFE\nno ipv6 nd ra dns-server ipv6_addr\ndefault ipv6 nd ra dns-server ipv6_addr",
    "desc": "The ipv6 nd ra dns-server command configures the IPv6 address of a preferred Recursive DNS Server (RDNSS) for the command mode interface to include in its neighbor-discovery Router Advertisements (RAs)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ipv6 nd ra dns-servers lifetime",
    "cmd": "ipv6 nd ra dns-servers lifetime",
    "desc": "The ipv6 nd ra dns-servers lifetime command sets the default value that the configuration mode interface uses for the lifetime of any Recursive DNS Server (RDNSS) configured on the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ipv6 nd ra dns-servers lifetime period",
    "cmd": "ipv6 nd ra dns-servers lifetime period\nno ipv6 nd ra dns-servers lifetime\ndefault ipv6 nd ra dns-servers lifetime",
    "desc": "not be used for name resolution."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ipv6 nd ra dns-suffix",
    "cmd": "ipv6 nd ra dns-suffix domain SUFFIX_LIFE\nno ipv6 nd ra dns-suffix ipv6_addr\ndefault ipv6 nd ra dns-suffix ipv6_addr",
    "desc": "The ipv6 nd ra dns-suffix command creates a DNS Search List (DNSSL) for the command mode interface to include in its neighbor-discovery Router Advertisements as defined in RFC 6106 ."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ipv6 nd ra dns-suffixes lifetime",
    "cmd": "ipv6 nd ra dns-suffixes lifetime period\nno ipv6 nd ra dns-suffixes lifetime\ndefault ipv6 nd ra dns-suffixes lifetime",
    "desc": "The ipv6 nd ra dns-suffixes lifetime command sets the default value that the configuration mode interface uses for the lifetime of any DNS Search List (DNSSL) configured on the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 nd ra hop-limit",
    "cmd": "ipv6 nd ra hop-limit quantity\nno ipv6 nd ra hop-limit lifetime\ndefault ipv6 nd ra hop-limit lifetime",
    "desc": "The ipv6 nd ra hop-limit command sets a suggested hop-limit value to be included in Router Advertisement (RA) packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 nd ra interval",
    "cmd": "ipv6 nd ra interval [SCALE] ra_period [minimum_period]\nno ipv6 nd ra interval\ndefault ipv6 nd ra interval",
    "desc": "The ipv6 nd ra interval command configures the interval between IPv6 Router Advertisement transmissions from the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 nd ra lifetime",
    "cmd": "ipv6 nd ra lifetime ra_lifetime\nno ipv6 nd ra lifetime\ndefault ipv6 nd ra lifetime",
    "desc": "The ipv6 nd ra lifetime command specifies the value that the switch places in the router lifetime field of IPv6 Router Advertisements sent from the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "ipv6 nd ra mtu suppress",
    "cmd": "ipv6 nd ra mtu suppress\nno ipv6 nd ra mtu suppress\ndefault ipv6 nd ra mtu suppress",
    "desc": "The ipv6 nd ra mtu suppress command suppresses the Router Advertisement (RA) MTU option on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 nd ra rx accept default-route",
    "cmd": "ipv6 nd ra rx accept default",
    "desc": "The ipv6 nd ra rx accept default-route command configures the interface to accept the default gateway information from the Router Advertisement (RA) in the interface configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 nd reachable-time",
    "cmd": "ipv6 nd reachable-time period\nno ipv6 nd reachable-time\ndefault ipv6 nd reachable-time",
    "desc": "The ipv6 nd reachable-time command specifies the time period that the switch includes in the reachable time field of RAs sent from the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 nd router-preference",
    "cmd": "ipv6 nd router-preference [RANK [high | low | medium]]\nno ipv6 nd router-preference\ndefault ipv6 nd router-preference",
    "desc": "The ipv6 nd router-preference command specifies the value that the switch enters in the Default Router Preference (DRP) field of Router Advertisements (RAs) that it sends from the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 neighbor cache persistent",
    "cmd": "ipv6 neighbor cache persistent\nno ipv6 neighbor cache persistent\ndefault ipv6 neighbor cache persistent",
    "desc": "The ipv6 neighbor cache persistent command restores the IPv6 neighbor cache after reboot."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 neighbor",
    "cmd": "ipv6 neighbor ipv6_addr PORT mac_addr\nno ipv6 neighbor ipv6_address PORT\ndefault ipv6 neighbor ipv6_addr PORT",
    "desc": "The ipv6 neighbor command creates an IPv6 neighbor discovery cache static entry."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "ipv6 route",
    "cmd": "ipv6 route dest_prefix NEXTHOP [DISTANCE][TAG_OPT][RT_NAME]\nno ipv6 route dest_prefix [nexthop_addr][DISTANCE]\ndefault ipv6 route dest_prefix [nexthop_addr][DISTANCE]",
    "desc": "The ipv6 route command creates an IPv6 static route."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 unicast-routing",
    "cmd": "ipv6 unicast-routing\nno ipv6 unicast-routing [DELETE_ROUTES]\ndefault ipv6 unicast-routing [DELETE_ROUTES]",
    "desc": "The ipv6 unicast-routing command enables the forwarding of IPv6 unicast packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 verify",
    "cmd": "ipv6 verify unicast source reachable-via RPF_MODE\nno ipv6 verify unicast\ndefault ipv6 verify unicast",
    "desc": "The ipv6 verify command configures Unicast Reverse Path Forwarding (uRPF) for inbound IPv6 packets on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "ipv6 dhcp snooping",
    "cmd": "ipv6 dhcp snooping [remote-id option | vlan [$ | vlan-range]]\nno ipv6 dhcp snooping [remote-id option | vlan [$ | vlan-range]]\ndefault ipv6 dhcp snooping [remote-id option | vlan [$ | vlan-range]]",
    "desc": "The ipv6 dhcp snooping command enables DHCP snooping globally on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim ipv6 sparse-mode",
    "cmd": "pim ipv6 sparse-mode\nno pim ipv6\nno pim ipv6 sparse-mode\ndefault pim ipv6\ndefault pim ipv6 sparse-mode",
    "desc": "The pim ipv6 sparse-mode command enables PIM Sparse Mode (PIM-SM) and IGMP (router mode) on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "show ipv6 dhcp snooping",
    "cmd": "show ipv6 dhcp snooping",
    "desc": "The show ipv6 dhcp snooping command displays information about the DHCP snooping configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "show ipv6 dhcp snooping counters",
    "cmd": "show ipv6 dhcp snooping counters [COUNTER_TYPE]",
    "desc": "The show ipv6 dhcp snooping counters command displays counters that track the quantity of DHCP request and reply packets that the switch receives."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "show ipv6 dhcp snooping hardware",
    "cmd": "show ipv6 dhcp snooping hardware",
    "desc": "The show ipv6 dhcp snooping hardware command displays internal hardware DHCP snooping status on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "show ipv6 hardware fib aggregate-address",
    "cmd": "show ipv6 address fib aggregate-address [ADDRESS][RESTRICTION]",
    "desc": "The show ipv6 hardware fib aggregate-address command displays the IPv6 prefixes that are restricted from entry into the hardware routing table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ipv6 interface",
    "cmd": "show ipv6 interface [INTERFACE_NAME][INFO_LEVEL]",
    "desc": "The ipv6 interface command displays the status of specified routed interfaces that are configured for IPv6."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ipv6 nd dad proxy",
    "cmd": "show ipv6 nd dad proxy",
    "desc": "Display information about the IPv6 Duplicate Address Detection (DAD) feature configured on an interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ipv6 nd ra internal state",
    "cmd": "show ipv6 nd ra internal state [INTERFACE_NAME]",
    "desc": "The ipv6 nd ra internal state command displays the state of the IPv6 Router Advertisement (RA) daemon for the specified routable interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ipv6 neighbors",
    "cmd": "show ipv6 neighbors [PORT][SOURCE][INFO_LEVEL]",
    "desc": "The show ipv6 neighbors command displays the IPv6 neighbor discovery cache."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ipv6 route",
    "cmd": "show ipv6 route [ADDRESS][ROUTE_TYPE][INFO_LEVEL]",
    "desc": "The show ipv6 route command displays IPv6 routing table entries that are in the Forwarding Information Base (FIB), including static routes, routes to directly connected networks, and dynamically learned routes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ipv6 route age",
    "cmd": "show ipv6 route ADDRESS age",
    "desc": "The show ipv6 route age command displays the IPv6 route age to the specified IPv6 address or prefix."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ipv6 route host",
    "cmd": "show ipv6 route host",
    "desc": "The show ipv6 route host command displays all host routes in the IPv6 host forwarding table."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ipv6 route interface",
    "cmd": "show ipv6 route [ADDRESS] interface PORT_NAME [INFO_LEVEL]",
    "desc": "The show ipv6 route interface command displays routing table entries on a specified routed port."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ipv6 route match tag",
    "cmd": "show ipv6 route ADDRESS match tag",
    "desc": "The show ipv6 route match tag command displays the route tag assigned to the specified IPv6 address or prefix."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ipv6 route summary",
    "cmd": "show ipv6 route summary",
    "desc": "The show ipv6 route summary command displays the information about the IPv6 routing table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform fap mroute ipv6",
    "cmd": "show platform fap mroute ipv6",
    "desc": "The show platform fap mroute ipv6 command enables PIM Sparse Mode (PIM-SM) and IGMP (router mode) on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show rib route ipv6",
    "cmd": "show rib route ipv6 [vrf vrf_name] [PREFIX][ROUTE TYPE]",
    "desc": "The show rib route ipv6 command displays a list of IPv6 Routing Information Base (RIB) routes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "hardware counter feature ip",
    "cmd": "hardware counter feature ip in|out layer3\nno hardware counter feature ip in|out layer3\ndefault hardware counter feature in|out layer3",
    "desc": "Use the hardware counter feature ip command to enable ingress and egress counters at Layer 3."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ACL Types",
    "cmd": "ACL Types",
    "desc": "The switch supports the following ACL types: • IPv4 matches on IPv4 source or destination addresses, with L4 modifiers including protocol, port number, IPsec tunnel interfaces, and DSCP value."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ACL Structure",
    "cmd": "ACL Structure",
    "desc": "An ACL is an ordered list of rules that defines access restrictions for the entities (the control plane or an interface) to which it is applied."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ACL Rules",
    "cmd": "ACL Rules",
    "desc": "The switch compares an ACL rule's command list to inbound and outbound packet fields."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ACL Rule Tracking",
    "cmd": "ACL Rule Tracking",
    "desc": "ACL rule tracking determines how ACL rules impact traffic on the interfaces where those rules are applied."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ACL Configuration",
    "cmd": "ACL Configuration",
    "desc": "You create and modify Access Control Lists (ACLs) in an ACL-configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ACL Rule Tracking Configuration",
    "cmd": "15 permit ip 10.30.10.0/24 host 10.20.10.1 log",
    "desc": "ACL Rules provide a log option that produces a syslog message about the packets matching a desired packet."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "SNMP Server",
    "cmd": "snmp-server community community-name [view viewname] [ro | rw] acl_name",
    "desc": "Use the snmp-server community command to apply the SNMP Server Service ACLs to restrict which hosts can access SNMP services on the switch:"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP",
    "cmd": "BGP",
    "desc": "Use the ip access-group (Service ACLs) and ipv6 access-group (Service ACLs) commands to apply Service ACLs for controlling connections to the BGP routing protocol agent: switch(config)# router bgp <asn>"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "OSPF",
    "cmd": "router ospf <id>",
    "desc": "Use the ip access-group (Service ACLs) and ipv6 access-group (Service ACLs) commands to apply Service ACLs to control packets processed by the OSPF routing protocol agent:"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "PIM",
    "cmd": "PIM",
    "desc": "Use the access-group command to apply Service ACLs for controlling packets processed by the PIM routing protocol agent: switch(config)# router pim switch(config-router-pim)# ipv4 switch(config-router-pim-ipv4)# access-group <acl_name>"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "IGMP",
    "cmd": "IGMP",
    "desc": "Use the ip igmp access-group command to apply Service ACLs for controlling packets processed by the IGMP management protocol agent: switch(config)# router igmp switch(config-router-igmp)# ip igmp access-group <acl_name>"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "LDP",
    "cmd": "LDP",
    "desc": "Use the ip access-group (Service ACLs) to apply Service ACLs for controlling packets and connections processed by the LDP MPLS label distribution protocol: switch(config)# mpls ldp switch(config-mpls-ldp)# ip access-group <acl_name>"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "MPLS Ping and Traceroute",
    "cmd": "MPLS Ping and Traceroute",
    "desc": "Use the ip access-group (Service ACLs) and ipv6 access-group (Service ACLs) commands to apply Service ACLs for controlling connections accepted by the MPLS Ping agent: switch(config)# mpls ping switch(config-mpls-ping)# ip access-group <acl_name> [vr…"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "active",
    "cmd": "active",
    "desc": "Sub-interface ACLs Limitations The sub-interface ACLs feature contains the following limitations: • Egress IPv4 ACLs on subinterfaces are not supported when sharing mode is disabled for Egress IPv4 RACLs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Route Maps",
    "cmd": "Route Maps",
    "desc": "A route map is an ordered set of rules that controls the redistribution of IP routes into a protocol domain based on criteria such as route metrics, access control lists, next-hop addresses, and route tags."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Route Map Description",
    "cmd": "route-map MAP_1 permit 10",
    "desc": "Route maps are composed of route map statements, each consisting of a list of match and set commands."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Route Map Configuration",
    "cmd": "Route Map Configuration",
    "desc": "Route maps are created and modified in route-map configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Route Map Creation and Editing",
    "cmd": "route-map map1 permit 50",
    "desc": "Creating a Route Map Statement To create a route map, use the route-map command, including the map name and filter type (deny or permit)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Prefix Lists",
    "cmd": "Prefix Lists",
    "desc": "A prefix list is an ordered set of rules that defines route redistribution access for a specified IP address space."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Prefix List Configuration",
    "cmd": "Prefix List Configuration",
    "desc": "A prefix list is an ordered set of rules that defines route redistribution access for a specified IP address space."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "IPv6 Prefix Lists",
    "cmd": "ipv6 prefix-list map1",
    "desc": "Creating an IPv6 Prefix List The switch provides an IPv6 prefix-list configuration mode for creating and modifying IPv6 prefix lists."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Static",
    "title": "Static Routes Redistribution into IGPs",
    "cmd": "Static Routes Redistribution into IGPs",
    "desc": "Use match ip next-hop to match against next-hops in a route-map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Static",
    "title": "is a configured next-hop for static route 10.20.30.0/24.",
    "cmd": "is a configured next-hop for static route 10.20.30.0/24.",
    "desc": "The following commands configure a route map: switch(config)# route-map routeMapName switch(config-route-map-routeMapName)# match ip next-hop prefix-list prefixListName For example, based on the route-map mentioned in the preceding command, to redist…"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Port ACLs with User-Defined Fields",
    "cmd": "Port ACLs with User-Defined Fields",
    "desc": "Describes the support for specifying User-Defined Fields (UDF) in Port ACLs, including IPv4, IPv6, and MAC ACLs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "IPv6 Port ACL",
    "cmd": "IPv6 Port ACL",
    "desc": "The following configurations create a new profile based on the default profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Port ACLs with User-Defined Fields Limitations",
    "cmd": "Port ACLs with User-Defined Fields Limitations",
    "desc": "User-defined fields consume a limited set of copy resources."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "clear ip access-lists counters",
    "cmd": "clear ip access-lists counters acl_name scope",
    "desc": "The clear ip access-lists counters command sets ACL counters to zero for the specified IPv4 Access Control List (ACL)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "clear ipv6 access-lists counters",
    "cmd": "clear ipv6 access-lists counters [acl_name][scope]",
    "desc": "The clear ipv6 access-lists counters command sets ACL counters to zero for the specified IPv6 Access Control List (ACL)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "continue (route map)",
    "cmd": "continue next_seq\nno continue next_seq\ndefault continue next_seq",
    "desc": "The continue command creates a route map statement entry that enables additional route map evaluation of routes with parameters meeting the statement matching criteria."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "counters per-entry",
    "cmd": "counters per-entry\nno counters per-entry\ndefault counters per-entry",
    "desc": "The counters per-entry command places the ACL in counting mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "deny (IPv4 ACL)",
    "cmd": "dscp_filter ttl_filter log\nno deny protocol source_addr source_port dest_addrR dest_port flags message fragments tracked\ndscp_filter ttl_filter log]\ndefault deny protocol source_addr source_port dest_addrR dest_port flags message fragments tracked\ndscp_filter ttl_filter log]\nprotocol.",
    "desc": "The deny command adds a deny rule to the configuration mode IPv4 Access Control List (ACL)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "deny (IPv6 ACL)",
    "cmd": "seq_num deny protocol src_addr source_pt dest_addr dest_pt flag msg hop tracked dscp_filter log\nno deny protocol src_addr source_pt dest_addr dest_pt flag msg hop tracked dscp_filter log\ndefault deny protocol src_addr source_pt dest_addr dest_pt flag msg hop tracked dscp_filter log\nprotocol. Use CLI syntax assistance to view parameters for specific protocols when creating a\ndeny rule.",
    "desc": "The deny command adds a deny rule to the an IPv6 Access Control List (ACL)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "deny (IPv6 Prefix List)",
    "cmd": "sequence deny ipv6_prefix mask",
    "desc": "The deny command adds a deny rule in the IPv6 Prefix List Configuration Mode ."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "deny (MAC ACL)",
    "cmd": "seq_num deny source_addr dest_addr [protocol][log]\nno deny source_addr dest_addr [protocol][log]\ndefault deny source_addr dest_addr [protocol][log]",
    "desc": "The deny command adds a deny rule to the MAC Access Control List (ACL) Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "deny (Standard IPv4 ACL)",
    "cmd": "no deny source_addr log\ndefault deny source_addr log",
    "desc": "The deny command adds a deny rule to the Standard IPv4 Access Control List (ACL) Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "deny (Standard IPv6 ACL)",
    "cmd": "seq_num deny source_addr\nno deny source_addr\ndefault deny source_addr",
    "desc": "The deny command adds a deny rule to the Standard IPv6 Access Control List (ACL) Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "hardware access-list resource sharing vlan in",
    "cmd": "hardware access-list resource sharing vlan [ipv4 | ipv6] in\nno hardware access-list resource sharing vlan in\nprocess and impacts traffic forwarding.",
    "desc": "The hardware access-list resource sharing vlan in command enables the IPv4 Ingress Sharing of hardware resources on the switch when the same ACL applies to different VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "hardware access-list resource sharing vlan ipv4 out",
    "cmd": "hardware access-list resource sharing vlan ipv4 out\nno hardware access-list resource sharing vlan ipv4 out\nprocess and impacts traffic forwarding.\nsharing for egress IPv4 RACLs is enabled.",
    "desc": "The hardware access-list resource sharing vlan ipv4 out command enables IPv4 Egress RACL TCAM sharing on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "hardware access-list update default-result permit",
    "cmd": "hardware access-list update default-result permit\nno hardware access-list update default-result permit\ndefault hardware access-list update default-result permit\nseries switches.",
    "desc": "The hardware access-list update default-result permit command configures the switch to permit all traffic on Ethernet and VLAN interfaces with ACLs applied to them while modifying the ACLs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "hardware counter feature acl out",
    "cmd": "hardware counter feature acl out [options [ipv4 | ipv6]\nno hardware counter feature acl out [options [ipv4 | ipv6]\ndefault hardware counter feature acl out [options [ipv4 | ipv6]",
    "desc": "The hardware counter feature acl out command enables egress ACL hardware counters for IPv4 or IPv6 and count the number of packets matching rules associated with egress ACLs applied to various interfaces on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "ip access-group (Service ACLs)",
    "cmd": "ip access-group acl_name [vrfvrf_name][in]\nno ip access-group acl_name [vrfvrf_name][in]\ndefault ip access-group acl_name [vrfvrf_name][in]",
    "desc": "The ip access-group (Service ACLs) command configures a Service ACL to apply to a control-plane service."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "ip access-group",
    "cmd": "ip access-group list_name [direction [in | out]]\nno ip access-group list_name [direction [in | out]]\ndefault ip access-group list_name [direction [in | out]]",
    "desc": "The ip access-group command applies an IPv4 or standard IPv4 Access Control List (ACL) to an interface or subinterface in the Interface Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "ip access-list",
    "cmd": "ip access-list list_name\nno ip access-list list_name\ndefault ip access-list list_name",
    "desc": "The ip access-list command places the switch in ACL Configuration Mode, a group change mode that modifies an IPv4 access control list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "ip access-list standard",
    "cmd": "ip access-list standard list_name\nno ip access-list standard list_name\ndefault ip access-list standard list_name",
    "desc": "The ip access-list standard command places the switch in STD-ACL Configuration Mode, a group change mode that modifies a standard IPv4 access control list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip prefix-list",
    "cmd": "ip prefix-list list_name [deny | permit] [seq index] network_addr [mask] resequence\nseq_number remark comment\nno ip prefix-list list_name seq [index]\ndefault ip prefix-list list_name seq [index]",
    "desc": "The ip prefix-list command creates a prefix list or adds an entry to an existing list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "ipv6 access-group",
    "cmd": "ipv6 access-group list_name [in | out]\nno ipv6 access-group list_name [in | out]\ndefault ipv6 access-group list_name [in | out]",
    "desc": "The ipv6 access-group command applies an IPv6 or standard IPv6 Access Control List (ACL) to the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "ipv6 access-group (Service ACLs)",
    "cmd": "ipv6 access-group ipv6_acl_name [vrf vrf_name][in]\nno ipv6 access-group [ipv6_acl_name][vrfvrf_name][in]\ndefault ipv6 access-group ipv6_acl_name [vrf vrf_name][in]",
    "desc": "The ipv6 access-group (Service ACLs) command configures an IPv6 or standard IPv6 Service ACL to be applied by a control-plane service."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "ipv6 access-list",
    "cmd": "ipv6 access-list list_name\nno ipv6 access-list list_name\ndefault ipv6 access-list list_name",
    "desc": "The ipv6 access-list command places the switch in IPv6-ACL Configuration Mode, a group change mode that modifies an IPv6 access control list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "ipv6 access-list standard",
    "cmd": "ipv6 access-list standard list_name\nno ipv6 access-list standard list_name\ndefault ipv6 access-list standard list_name",
    "desc": "The ipv6 access-list standard command places the switch in std-IPv6-ACL-configuration mode, a group change mode that modifies a standard IPv6 access control list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ipv6 prefix-list",
    "cmd": "ipv6 prefix-list list_name\nno ipv6 prefix-list list_name\ndefault ipv6 prefix-list list_name",
    "desc": "The ip prefix-list command places the switch in IPv6 prefix-list configuration mode, which is a group change mode that modifies an IPv6 prefix list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "mac access-group",
    "cmd": "mac access-group list_name [direction [in | out]]\nno mac access-group list_name[direction [in | out]]\ndefault mac access-group list_name [direction [in | out]]",
    "desc": "The mac access-group command applies a MAC Access Control List (MAC ACL) when in the Interface Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "mac access-list",
    "cmd": "mac access-list list_name\nno mac access-list list_name\ndefault mac access-list list_name",
    "desc": "The mac access-list command places the switch in MAC-ACL Configuration Mode, a group change mode that modifies a MAC access control list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "match (route-map)",
    "cmd": "match condition\nno match condition\ndefault match condition",
    "desc": "The match command creates a route map statement entry that specifies one route filtering command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "no sequence number",
    "cmd": "no line_num\ndefault line_num",
    "desc": "The no sequence number command removes the rule with the specified sequence number from the ACL."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "permit (IPv4 ACL)",
    "cmd": "seq_num permit protocol src_addr source_pt dest_addr dest_pt flags msg fragments tracked\ndscp_filter ttl_filter log\nno permit protocol src_addr source_pt dest_addr dest_pt flags msg fragments tracked dscp_filter\nttl_filter log\ndefault permit protocol src_addr source_pt dest_addr dest_pt flags msg fragments tracked\ndscp_filter ttl_filter log",
    "desc": "The permit command adds a permit rule to the configuration mode IPv4 Access Control List (ACL)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "permit (IPv6 Prefix List)",
    "cmd": "seq_num permit ipv6_prefix mask",
    "desc": "The permit command adds a rule to the configuration mode IPv6 prefix list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "permit (MAC ACL)",
    "cmd": "seq_num permit source_addr dest_addr protocol log\nno permit source_addr dest_addr protocol log\ndefault permit source_addr dest_addr protocol log",
    "desc": "The permit command adds a permit rule to the configuration mode MAC access control list packets through the interface to which the list is applied."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "permit (Standard IPv4 ACL)",
    "cmd": "no permit [ source_addr network_addr [any | host] [log]\ndefault permit [ source_addr network_addr [any | host][log]",
    "desc": "The permit command adds a permit rule to a standard IPv4 Access Control List (ACL)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "permit (Standard IPv6 ACL)",
    "cmd": "no permit source_addr\ndefault permit source_addr",
    "desc": "The permit command adds a permit rule to the standard IPv6 access control list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "remark",
    "cmd": "remark text\nline_num remark [text]\nno remark text\ndefault remark text",
    "desc": "The remark command adds a non-executable comment statement into the pending ACL."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "route-map",
    "cmd": "route-map map_name [filter_type] [sequence_number]\nno route-map map_name [filter_type] [sequence_number]\ndefault route-map map_name [filter_type][sequence_number]",
    "desc": "The route-map command places the switch in Route-Map Configuration Mode, a group change mode that modifies a route map statement."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "no seq (IPv6 Prefix Lists)",
    "cmd": "no seq line_num\ndefault seq line_num",
    "desc": "The no seq command removes the rule with the specified sequence number from the ACL."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "set (route-map)",
    "cmd": "set condition [as-path prepend [num | auto]]\nno set condition [as-path prepend [num | auto]]\ndefault set condition [as-path prepend [num | auto]]",
    "desc": "The set command specifies modifications to routes selected for redistribution by the Route-Map Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "set as-path match",
    "cmd": "set as-path match [all replacement [none| auto]] as_path\nset as-path match[all replacement [none| auto]] as_path",
    "desc": "The set as-path match command configures the as_path attribute for prefixes either received from a BGP neighbor or advertised to a BGP neighbor in the Route-Map Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "set as-path prepend",
    "cmd": "set as-path prepend auto | as_number [auto | as_number | last-as count]\nno set as-path prepend auto | as_number [auto | as_number | last-as count]\ndefault set as-path prepend auto | as_number [auto | as_number | last-as count]",
    "desc": "The set as-path prepend command adds a set statement to a route map to prepend one or more Autonomous System (AS) numbers to the as_path attribute of a BGP route."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "set community (route-map)",
    "cmd": "show active",
    "desc": "The set community command specifies community attribute modifications to routes selected for redistribution."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "set extcommunity (route-map)",
    "cmd": "set extcommunity cond_x [cond_2][cond_n][mod_type]\nset extcommunity none\nno set extcommunitycond_x [cond_2][cond_n][mod_type]\ndefault set extcommunity cond_x [cond_2][cond_n][mod_type]\ndefault set extcommunity none",
    "desc": "The set extcommunity command specifies extended community attribute modifications to routes selected for redistribution."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show (ACL configuration modes)",
    "cmd": "show\nshow active\nshow comment\nshow diff\nshow pending",
    "desc": "The show command displays the contents of an Access Control List (ACL)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show hardware tcam profile",
    "cmd": "show hardware tcam profile [[profileName [[feature featureName] detail]]|[detail]",
    "desc": "The show hardware tcam profile command displays the hardware specific information for the current operational TCAM profile in the running configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "show access-lists",
    "cmd": "show access-lists [interface interface_acl] | [acl_name acl_name] acl_name | [scope summary]",
    "desc": "The show access-lists command displays the contents of all IPv4, IPv6, and MAC Access Control Lists (ACLs) on the switch in addition to the configuration and status."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "show ip access-lists",
    "cmd": "show ip access-lists [interface interface_ipv4]|[acl_name acl_name] | [scope summary]",
    "desc": "The show ip access-lists command displays the contents of IPv4 and standard IPv4 Access Control List (ACLs) on the switch with the configuration and status."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show ip prefix-list",
    "cmd": "show ip prefix-list [display_items list_name]",
    "desc": "The show ip prefix-list command displays all rules for the specified IPv4 prefix list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "show ipv6 access-lists",
    "cmd": "show ipv6 access-lists [ interface interface_ipv6] [supplicant supplicant][acl_name acl_name][scope",
    "desc": "The show ipv6 access-lists command displays the contents of all IPv6 Access Control Lists (ACLs) on the switch with the configuration and status."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show ipv6 prefix-list",
    "cmd": "show ipv6 prefix-list [display_items list_name]",
    "desc": "The show ipv6 prefix-list command displays all rules for the specified IPv6 prefix list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "show mac access-lists",
    "cmd": "show mac access-lists [interface interface_acl] [acl_name acl_name] [scope summary]",
    "desc": "The show mac access-lists command displays the contents of all MAC Access Control Lists (ACLs) on the switch, along with their configuration and status."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform arad acl tcam summary",
    "cmd": "show platform arad acl tcam summary",
    "desc": "The show platform arad tcam summary command displays the percentage of TCAM utilization per forwarding ASIC."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform arad acl tcam",
    "cmd": "show platform arad acl tcam [scope [detail | diff | hw | shadow | summary]",
    "desc": "The show platform arad acl tcam command displays the number of TCAM entries (hardware resources) occupied by the ACL on each forwarding ASIC."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show platform arad mapping",
    "cmd": "show platform arad chip_name mapping",
    "desc": "The show platform arad mapping command displays the mapping between the interfaces and the forwarding ASICs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform fap acl",
    "cmd": "show platform fap acl mirroring",
    "desc": "The show platform fap acl command displays the ACL information of Sand platform devices."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform fap acl tcam",
    "cmd": "show platform fap acl tcam [detail | diff | hw | shadow | summary]",
    "desc": "The show platform fap tcam command displays the number of TCAM entries (hardware resources) occupied by the ACL on each forwarding ASIC of Sand platform devices."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform fap acl tcam hw",
    "cmd": "show platform fap fap_name acl tcam hw",
    "desc": "The show platform fap acl tcam hw command displays the TCAM entries configured for each TCAM bank including policy-maps and corresponding traffic match."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform fap acl tcam summary",
    "cmd": "show platform fap acl tcam summary",
    "desc": "The show platform fap acl tcam summary command displays for each forwarding ASIC, the number of TCAM entries consumed per ACL type, and in which TCAM bank the entries are installed."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "show platform trident tcam",
    "cmd": "qos | shared | summary]",
    "desc": "The show platform trident tcam command displays the TCAM entries configured for each TCAM group including policy maps and corresponding hits."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Permit",
    "cmd": "Permit",
    "desc": "ACL, Route Map, and Prefix List Commands"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Deny",
    "cmd": "Deny",
    "desc": "*"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show route-map",
    "cmd": "show route-map [map_name]",
    "desc": "The show route-map command displays the contents of configured route maps."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "system profile",
    "cmd": "default system profile\nno system profile",
    "desc": "The system profile command creates a new Ternary Content-Addressable Memory (TCAM) profile in the running configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "up",
    "cmd": "up",
    "desc": "Vlan15 10.1.1.3/24"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "System",
    "title": "up",
    "cmd": "show ipv6 virtual-router",
    "desc": "up up up up up switch# Show IPv6 Virtual-Router The show ipv6 virtual-router command displays the virtual MAC address assigned to the switch and all virtual IPv6 addresses assigned to each VLAN interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "ip fhrp accept-mode",
    "cmd": "ip fhrp accept-mode\nno ip fhrp accept-mode\ndefault ip fhrp accept-mode",
    "desc": "The ip fhrp accept-mode command configures the switch to permit SSH access to the VRRP Master and VARP Master router."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "HA",
    "title": "ip virtual-router address",
    "cmd": "ip virtual-router address ipv4_addr\nno ip virtual-router address [ipv4_addr]\ndefault ip virtual-router address [ipv4_addr]",
    "desc": "The ip virtual-router address command assigns a virtual IPv4 address to the VLAN interface being configured."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "HA",
    "title": "ip virtual-router mac-address",
    "cmd": "ip virtual-router mac-address [mac_addr]\nno ip virtual-router mac address [mac_addr]",
    "desc": "The ip virtual-router mac-address command assigns a virtual MAC address to the switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "HA",
    "title": "ip virtual-router mac-address advertisement-interval",
    "cmd": "ip virtual-router mac-address advertisement-interval period\nno ip virtual-router mac-address advertisement-interval\ndefault ip virtual-router mac-address advertisement-interval",
    "desc": "The ip virtual-router mac-address advertisement interval command specifies the period between the transmission of consecutive gratuitous ARP requests that contain the virtual router mac address for each virtual-router IP address configured on the switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "HA",
    "title": "ipv6 virtual-router address",
    "cmd": "ipv6 virtual-router address net_addr\nno ipv6 virtual-router address [net_addr]\ndefault ipv6 virtual-router address [net_addr]",
    "desc": "The ipv6 virtual-router address command assigns a virtual IPv6 address to the VLAN interface being configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "no vrrp",
    "cmd": "no vrrp group\ndefault vrrp group",
    "desc": "The no vrrp command removes all VRRP configuration commands for the specified virtual router on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "HA",
    "title": "show ip virtual-router",
    "cmd": "show ip virtual-router",
    "desc": "The show ip virtual-router command displays the virtual MAC address assigned to the switch and all virtual IP addresses assigned to each VLAN interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "show vrrp",
    "cmd": "show vrrp [INFO_LEVEL] [STATES]\nshow vrrp INTF GROUP_NUM [INFO_LEVEL] [STATES]\nshow vrrp GROUP_NUM INTF_GROUP [INFO_LEVEL] [STATES]",
    "desc": "The show vrrp command displays information about the Virtual Router Redundancy Protocol (VRRP) groups configured on a specified interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp advertisement interval",
    "cmd": "vrrp group advertisement interval adv_time\nno vrrp group advertisement interval\ndefault vrrp group advertisement interval",
    "desc": "The vrrp advertisement interval command configures the interval between successive advertisement messages that the switch sends to VRRP routers in the specified virtual router group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp disabled",
    "cmd": "vrrp group disabled\nno vrrp group disabled\ndefault vrrp group disabled",
    "desc": "The vrrp disabled command places the switch in stopped state for the specified virtual router."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp ipv4",
    "cmd": "vrrp group ipv4 ipv4_address\nno vrrp group ipv4 ipv4_address\ndefault vrrp group ipv4 ipv4_address",
    "desc": "The vrrp ipv4 command configures the primary IP address for the specified VRRP virtual router."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp ipv4 checksum pseudo-header exclude",
    "cmd": "vrrp group ipv4 checksum pseudo-header exclude\nno vrrp group ipv4 checksum pseudo-header exclude",
    "desc": "This command excludes the pseudo-header in IPv4 VRRPv3 checksum calculation on the VRRP group on the configuration mode interface of the switch and supports IPv4 VRRPv3 interoperability."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp ipv4 secondary",
    "cmd": "vrrp group ipv4 ipv4_addr secondary\nno vrrp group ipv4 ipv4_addr secondary\ndefault vrrp group ipv4 ipv4_addr secondary",
    "desc": "The vrrp ipv4 secondary command assigns a secondary IP address to the specified virtual router."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp ipv4 version",
    "cmd": "vrrp group ipv4 version VERSION_NUMBER\nno vrrp group ipv4 version\ndefault vrrp group ipv4 version",
    "desc": "The vrrp ipv4 version command enables VRRP on the configuration mode interface and configures the VRRP version for the specified VRRP virtual router."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp ipv6",
    "cmd": "vrrp group ip ipv6_address\nno vrrp group ip ipv6_address\ndefault vrrp group ip ipv6_address",
    "desc": "The vrrp ipv6 command configures the IPv6 address for the specified VRRP virtual router."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp mac-address advertisement-interval",
    "cmd": "vrrp group mac-address advertisement-interval period\nno vrrp group mac-address\ndefault vrrp group mac-address",
    "desc": "The vrrp mac-address advertisement-interval command specifies the interval between advertisement packets sent by the master router to the VRRP group members."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "vrrp peer authentication",
    "cmd": "vrrp group peer authentication AUTH_PARAMETER\nno vrrp group peer authentication\ndefault vrrp group peer authentication",
    "desc": "The vrrp peer authentication command configures parameters the switch uses to authenticate virtual router packets it receives from other VRRP routers in the group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp preempt",
    "cmd": "vrrp group preempt\nno vrrp group preempt\ndefault vrrp group preempt",
    "desc": "The vrrp preempt command controls a virtual routers preempt mode setting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp preempt delay",
    "cmd": "vrrp group preempt delay [MINIMUM_INTERVAL] [RELOAD_INTERVAL]\nno vrrp group preempt delay [DELAY_TYPE]\ndefault vrrp group preempt delay [DELAY_TYPE]",
    "desc": "The vrrp preempt delay command specifies the interval between a VRRP preemption event and the point when the switch becomes the master VRRP router."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp priority-level",
    "cmd": "vrrp group priority-level level\nno vrrp group priority-level level\ndefault vrrp group priority-level level",
    "desc": "The vrrp priority-level command configures the switchs priority setting for a VRRP virtual router."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp session description",
    "cmd": "vrrp group session description label_text\nno vrrp group session description\ndefault vrrp group session description",
    "desc": "The vrrp session description command associates a text string to a VRRP virtual router on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp timers delay reload",
    "cmd": "vrrp group timers delay reload [INTERVAL]\nno vrrp group timers delay reload\ndefault vrrp group timers delay reload",
    "desc": "The vrrp timers delay reload command delays the time for VRRP initialization after a system reboot."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp tracked-object",
    "cmd": "vrrp group tracked-object object_name ACTION amount\nno vrrp group tracked-object object_name ACTION\ndefault vrrp group tracked-object object_name ACTION",
    "desc": "The vrrp tracked-object command configures the VRRP client process on the configuration mode interface to track the specified tracked object and react when its status changes to down."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "action drop (DirectFlow-flow mode)",
    "cmd": "action drop\nno action drop\ndefault action drop",
    "desc": "The action drop command configures packets that match an entry to be dropped."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "action mirror (DirectFlow-flow mode)",
    "cmd": "action DIRECTION mirror INT_NAME\nno action DIRECTION mirrorINT_NAME\ndefault action DIRECTION mirror INT_NAME",
    "desc": "The action mirror command can be used to ingress or egress mirror traffic to a mirror destination."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "action output (DirectFlow-flow mode)",
    "cmd": "action output DESTINATION\nno action output DESTINATION\ndefault action output DESTINATION",
    "desc": "The action output command configures an Ethernet or port channel interface as the output of a specified port mirroring session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "action set (DirectFlow-flow mode)",
    "cmd": "action set CONDITION\nno action set CONDITION\ndefault action set CONDITION",
    "desc": "The action set command allows you to configure a packet to be routed out a layer three interface using a DirectFlow entry."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "directflow",
    "cmd": "directflow\nno directflow\ndefault directflow",
    "desc": "The directflow command places the switch in DirectFlow configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "flow (DirectFlow)",
    "cmd": "flow flow_name\nno flow flow_name\ndefault flow flow_name",
    "desc": "The flow command places the switch in flow configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "persistent",
    "cmd": "persistent\nno persistent",
    "desc": "DirectFlow flows are persistent by default."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "priority (DirectFlow-flow mode)",
    "cmd": "priority priority_value\nno priority\ndefault priority",
    "desc": "The priority command sets the priority for the flow match rules."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show directflow",
    "cmd": "show directflow [counters | details]",
    "desc": "The show directflow command displays summary information for DirectFlow."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show directflow flows",
    "cmd": "show directflow flows [flow_name [counters | detail]]",
    "desc": "The show directflow flows command displays the contents of the flow table, showing each entry with its match rules, actions, and packet counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "timeout (DirectFlow-flow mode)",
    "cmd": "timeout [hard | idle]\nno timeout",
    "desc": "The timeout command, in DirectFlow mode, command configures the connection timeout period for connection sessions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Decap Groups",
    "cmd": "Decap Groups",
    "desc": "These sections describe the Decap Groups features: • Decap Groups Overview • Configuring Decap Groups • Configuring Generic UDP Encapsulation (GUE) Decap Groups • Decap Groups Commands"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Decap Groups Overview",
    "cmd": "Decap Groups Overview",
    "desc": "The Decap Group feature provides a data structure that receives encapsulated packets and extracts the payload."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Decap Groups Commands",
    "cmd": "Decap Groups Commands",
    "desc": "Decap Groups Configuration Commands • ip decap-group • tunnel decap-interface • tunnel decap-ip • tunnel type Decap Groups Show Command • show ip decap-group"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "ip decap-group",
    "cmd": "ip decap-group group_name\nno ip decap-group group_name\ndefault ip decap-group group_name",
    "desc": "The ip decap-group command places the switch in decap-group configuration mode which permits the creation or modification of Decap Groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip decap-group",
    "cmd": "show ip decap-group [decap-group name | dynamic]",
    "desc": "The show ip decap-group command displays the IP decap groups available on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "tunnel decap-interface",
    "cmd": "no tunnel decap-interface {Ethernet | Loopback | Management | Port-Channel | Tunnel | Vlan |\nVXLAN | all}\ndefault tunnel decap-interface{Ethernet | Loopback | Management | Port-Channel | Tunnel | Vlan",
    "desc": "The tunnel decap-interface command adds all locally configured IP addresses to the specific Layer 3 interface per Decap Group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "tunnel decap-ip",
    "cmd": "tunnel decap-ip [ipv4_address | ipv6_address]",
    "desc": "The tunnel decap-ip command specifies the IP address of packets handled by the Decap-Group Configuration Mode for the Decap Group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "tunnel type",
    "cmd": "tunnel type gre",
    "desc": "The tunnel type command specifies the tunnel protocol for extracting payload from encapsulated packets that arrive on the IP address specified for the configuration mode decap group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Nexthop Groups",
    "cmd": "Nexthop Groups",
    "desc": "These sections describe the Nexthop groups: • Next-hop Group Description • Next-hop Group Configuration • Nexthop Group Commands"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Next-hop Group Description",
    "cmd": "Next-hop Group Description",
    "desc": "Each routing table entry provides the next hop address to a specified destination."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Next-hop Group Configuration",
    "cmd": "Next-hop Group Configuration",
    "desc": "Next-hop groups are configured and modified in next-hop-group configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Segment Security",
    "cmd": "Segment Security",
    "desc": "• Overview of MSS-Group • Configuring MSS-Group • Segment Security Considerations • Show Commands • Segment Security Commands"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Segment Security Considerations",
    "cmd": "Segment Security Considerations",
    "desc": "• Multicast and Link-Local prefixes are not supported."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Segment Security Commands",
    "cmd": "Segment Security Commands",
    "desc": "Global Configuration Commands • match-list input • router segment-security Match-List Input Configuration Commands • match (match-list input) Router Segment-Security Configuration Commands • segment policy policy-drop-all default"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "clear segment-security hardware counters",
    "cmd": "clear segment-security hardware counters",
    "desc": "The clear segment-security hardware command clears the MSS-Group (segment security) Hit and Drop counters for all hits, and the hits and drops for each separate segment's policy."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "definition (segment)",
    "cmd": "definition\nno definition\ndefault definition\nmatch (segment definition)",
    "desc": "The definition command enters Router Segment-Security VRF Segment Definition Configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from (segment policies)",
    "cmd": "from segment_name policy [ policy-drop-all | policy-forward-all]\nno from segment_name [policy [ policy-drop-all | policy-forward-all]\ndefault from segment_name [policy [ policy-drop-all | policy-forward-all]",
    "desc": "The from command adds a policy to a segment in order to filter traffic from a specified segment, either the same segment or a different segment."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "match-list input",
    "cmd": "match-list input [prefix-ipv4 | prefix-ipv6] match_list_name\nno match-list input [prefix-ipv4 | prefix-ipv6] match_list_name\nno match-list input [prefix-ipv4 | prefix-ipv6] match_list_name",
    "desc": "The match-list input command enters Match List Configuration mode for the specified match list, creating one if it does not exist."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "match (match-list input)",
    "cmd": "match [prefix-ipv4 | prefix-ipv6]ip_address_prefix\nno match [prefix-ipv4 | prefix-ipv6] ip_address_prefix\ndefault match [prefix-ipv4 | prefix-ipv6] ip_address_prefix",
    "desc": "The match command adds an entry to a match list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "match (segment definition)",
    "cmd": "match [prefix-ipv4 | prefix-ipv6] match_list_name\nno match [prefix-ipv4 | prefix-ipv6] match_list_name\ndefault match [prefix-ipv4 | prefix-ipv6] match_list_name",
    "desc": "The match command adds a match list to a segment definition."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "policies (segment)",
    "cmd": "policies\nno policies\ndefault policies",
    "desc": "The policies command places the switch in Router Segment Security VRF Segment Policies Configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "router segment-security",
    "cmd": "router segment-security\nno router segment-security\ndefault router segment-security\nsegment\nshutdown\nvrf",
    "desc": "The router segment-security command enters Router Segment-Security Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "segment",
    "cmd": "segment segment_name\nno segment segment_name\ndefault segment segment_name",
    "desc": "The segment command enters Router Segment-Security VRF Segment Configuration mode, creating a segment if one does not exist."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "segment policy policy-drop-all default",
    "cmd": "segment policy policy-drop-all default\nno segment policy policy-drop-all default\ndefault segment policy policy-drop-all default",
    "desc": "The segment policy policy-drop-all default command configures the switch to drop all traffic to all segments."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show match-list",
    "cmd": "show match-list [prefix-ipv4 | prefix-ipv6] [list-name]",
    "desc": "The show match-list command displays match lists of type IPv4 or IPv6."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show segment-security",
    "cmd": "show segment-security [[[vrf vrf_name]|[segment seg_name]|[application [application_name]|",
    "desc": "The show segment-security command shows the status and configuration of MSS-Group (segment security)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show segment-security hardware",
    "cmd": "show segment-security hardware [summary | detail | routes | counters][vrf vrf-name][segment segname]",
    "desc": "The show segment-security hardware command displays detailed information about the hardware resources used by the MSS-Group feature."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show segment-security hardware counters",
    "cmd": "show segment-security hardware counters [vrf vrf_name]",
    "desc": "The show segment-security hardware counters command displays the counters for policies in each segment, including the default policies."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show segment-security hardware detail",
    "cmd": "show segment-security hardware detail [vrf vrf_name][segment seg_name]",
    "desc": "The show segment-security hardware detail command displays the hardware ID allocated to each segment, the prefixes programmed in hardware for each segment, and the adjacency index used by each prefix as determined from L3 hardware tables."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show segment-security hardware routes",
    "cmd": "show segment-security hardware routes [vrf vrf-name][segment seg-name]",
    "desc": "The show segment-security hardware routes command displays the route and type for each programmed prefix in hardware."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show segment-security hardware summary",
    "cmd": "show segment-security hardware summary [vrf vrf-name][segment seg-name]",
    "desc": "The show segment-security hardware summary command displays the hardware ID, number of prefixes, and number of successfully programmed prefixes for each VRF and segment specified."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VXLAN Control Service",
    "cmd": "VXLAN Control Service",
    "desc": "The VXLAN control service allows hardware VXLAN Tunnel End Points (VTEPs) to share state with each other in order to establish VXLAN tunnels without the need for a multicast control plane."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "Hardware Switch Controller (HSC) Service",
    "cmd": "Hardware Switch Controller (HSC) Service",
    "desc": "Traffic between virtual machines which share a physical host (or between virtual machines and the rest of the network) is forwarded by virtual switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "Network Topology Service",
    "cmd": "Network Topology Service",
    "desc": "The network topology service gathers information from CVX clients to provide a view of the physical topology of the network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "Static Topology Service",
    "cmd": "Static Topology Service",
    "desc": "Static Topology addresses cases where the deployment infrastructure in an OpenStack setup that manages Virtual Machines and Bare Metal servers does not enable LLDP on interfaces connecting hosts to switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "cvc1",
    "cmd": "cvc1",
    "desc": "Configuring Network Topology Service"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "cvc2",
    "cmd": "cvc2",
    "desc": "Configuring Network Topology Service"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "cvc3",
    "cmd": "cvc3",
    "desc": "Configuring Network Topology Service"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "cvc4",
    "cmd": "cvc4",
    "desc": "bcf6.85bd.8050 dsj14-rack14-tor1 • This command displays all connections in the topology. switch# show network physical-topology neighbors cvx287.sjc.aristanetworks.com Interface Neighbor Intf Neighbor Host"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "cvx",
    "cmd": "cvx\nno cvx\ndefault cvx",
    "desc": "CVX (CloudVision eXtension) aggregates and shares status across a network of physical switches running EOS."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "heartbeat-timeout (CVX)",
    "cmd": "heartbeat-timeout period\nno heartbeat-timeout\ndefault heartbeat-timeout",
    "desc": "The heartbeat-timeout command specifies the CVX timeout period."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "management cvx",
    "cmd": "management cvx\nno management cvx\ndefault management cvx",
    "desc": "The management cvx command places the switch in mgmt-CVX configuration mode to configure CVX client parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "manager",
    "cmd": "manager ip_address [port]",
    "desc": "The manager command configures the IP address of the OVSDB controller for the HSC service, allowing CVX to connect to the controller."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "name-resolution force (CVX-OpenStack)",
    "cmd": "name-resolution force",
    "desc": "The name-resolution force command initiates an OpenStack controller function that communicates with the OpenStack Keystone and Nova services to update names of VMs and tenants mapped by the local OpenStack instance."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "ovsdb-shutdown",
    "cmd": "ovsdb-shutdown\nno ovsdb-shutdown\ndefault ovsdb-shutdown",
    "desc": "The ovsdb-shutdown command shuts down the OVSDB server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "port (CVX)",
    "cmd": "port port_number\nno port\ndefault port",
    "desc": "The port command specifies the TCP port number the CVX server listens on."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "resync-period",
    "cmd": "resync-period seconds\nno resync-period\ndefault resync-period",
    "desc": "The resync-period command configures the grace period for completion of synchronization between the VXLAN control service and clients after a CVX restart."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "server host (Management-CVX)",
    "cmd": "server host host\nno server host\ndefault server host",
    "desc": "The server host command configures the IP address or host name of the CVX server to which the CVX client device connects."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "service hsc",
    "cmd": "service hsc",
    "desc": "The service hsc command enters the CVX-HSC configuration mode where the HSC service is enabled and configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "service openstack",
    "cmd": "service openstack",
    "desc": "The service openstack command places the switch in CVX-OpenStack configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "service topology",
    "cmd": "service topology\nno service topology",
    "desc": "The service topology command configures the topology statically on CVX without running LLDP on the servers connected to switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "service VXLAN",
    "cmd": "service VXLAN",
    "desc": "The service VXLAN command enters the CVX-VXLAN configuration mode where the VXLAN control service is enabled and configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show cvx",
    "cmd": "show cvx",
    "desc": "The show cvx command displays the enable status and current configuration of CVX."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show network physical-topology",
    "cmd": "show network physical-topology [hosts|neighbors]",
    "desc": "The show network physical-topology command displays the network topology discovered through CVX."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "source-interface (Management-CVX)",
    "cmd": "source-interface INT_NAME\nno source-interface\ndefault source-interface",
    "desc": "The source-interface command specifies the interface from where the IPv4 address is derived for use as the source for outbound CVX packets that the switch sends as a CVX client."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "DHCP",
    "title": "vtep (CVX-HSC)",
    "cmd": "vtep flood list type all | any\nno vtep flood list type\ndefault vtep flood list type",
    "desc": "The HSC service sends flood lists to each VTEP through CVX."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "vtep (CVX-VXLAN)",
    "cmd": "vtep mac-learning [control-plane|data-plane ]",
    "desc": "The OVSDB management protocol includes provisions for control-plane MAC learning, which allows MAC addresses to be distributed among VTEPs without using the data plane."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "RIP Conceptual Overview",
    "cmd": "RIP Conceptual Overview",
    "desc": "Routing Information Protocol (RIP) is a routing protocol typically used as an Interior Gateway Protocol (IGP)."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "RIP Configuration Mode",
    "cmd": "router rip",
    "desc": "The router rip command places the switch in router-RIP configuration mode to configure Routing Information Protocol (RIP) routing."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "RIP Commands",
    "cmd": "RIP Commands",
    "desc": "Global Configuration Commands • router rip • router rip vrf Interface Configuration Commands • rip v2 multicast disable Router-RIP Configuration Mode • distance (RIP) • distribute-list (RIP) • metric default"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "distance (RIP)",
    "cmd": "distance distance_value\nno distance\ndefault distance",
    "desc": "The distance command assigns an administrative distance to routes that the switch learns through RIP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "distribute-list (RIP)",
    "cmd": "distribute-list [DIRECTION [in | out] [MAP [route-mapmap_name] [INTF [ethernet e_num]|[loopback\nno distribute-list [DIRECTION [in | out] [MAP [route-mapmap_name] [INTF [ethernet e_num]|\ndefault distribute-list [DIRECTION [in | out] [MAP [route-mapmap_name] [INTF [ethernet e_num]|",
    "desc": "The distribute-list command allows users to filter out routes that are received or sent out."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "metric default",
    "cmd": "metric default metric_value\nno metric default\ndefault metric default",
    "desc": "The metric default command specifies the metric value assigned to RIP routes learned from other protocols."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "network (RIP)",
    "cmd": "network NETWORK_ADDRESS\nno network NETWORK_ADDRESS\ndefault network NETWORK_ADDRESS",
    "desc": "The network command specifies which network the switch runs Routing Information Protocol (RIP), and also specifies which routes will be accepted into the RIP routing table."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "redistribute (RIP)",
    "cmd": "redistribute connected ROUTE_MAP\nredistribute ROUTE_TYPE [ROUTE_MAP]\nno redistribute connected ROUTE_MAP\nno redistribute ROUTE_TYPE\ndefault redistribute connected ROUTE_MAP\ndefault redistribute ROUTE_TYPE",
    "desc": "The redistribute command enables the importing of routes from a specified routing domain to RIP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "rip v2 multicast disable",
    "cmd": "rip v2 multicast disable\nno rip v2 multicast disable\ndefault rip v2 multicast disable",
    "desc": "The rip v2 multicast disable command specifies the transmission of Routing Information Protocol (RIP) Version 2 update packets from the configuration mode interface as broadcast to 255."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "router rip vrf",
    "cmd": "router rip vrf [RIP_INSTANCE]\nno router rip vrf [RIP_INSTANCE]\ndefault router rip vrf [RIP_INSTANCE]",
    "desc": "The router rip command places the switch in router-RIP configuration mode to configure an RIP routing instance in the non-default VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show ip rip database",
    "cmd": "show ip rip database [FILTER]",
    "desc": "The show ip rip database command displays information about routes in the Routing Information Base."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show ip rip neighbors",
    "cmd": "show ip rip neighbors",
    "desc": "The show ip rip neighbors command displays information about all RIP route gateways."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "timers (RIP)",
    "cmd": "timers [update_time | expire_time | deletion_time]\nno timers\ndefault timers",
    "desc": "The timers command configures the update interval, the expiration time, and the deletion time for routes received and sent through RIP."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "OSPF Routes over GRE Tunnels",
    "cmd": "OSPF Routes over GRE Tunnels",
    "desc": "This feature introduces support for OSPF routes over GRE tunnels under default and non-default VRFs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "Show Commands",
    "cmd": "show bfd hardware acceleration",
    "desc": "Hardware Acceleration Information To view whether hardware acceleration is running use the show bfd hardware acceleration command."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "Redistribute Configuration",
    "cmd": "Redistribute Configuration",
    "desc": "Configuring the redistribute ospf command under the config-router-bgp mode with multiple OSPFv2 instances configured redistributes routes from all OSPFv2 instances into BGP."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "OSPF Routes over GRE Tunnels Configuration",
    "cmd": "OSPF Routes over GRE Tunnels Configuration",
    "desc": "You may employ the following commands in the router OSPF mode: • tunnel routes • no tunnel routes • default tunnel routes To enable OSPFv2 over GRE tunnels, use the following commands: switch(config)# router ospf 6"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "auto-cost reference-bandwidth (OSPFv2)",
    "cmd": "auto-cost reference-bandwidth rate\nno auto-cost reference-bandwidth rate\ndefault auto-cost reference-bandwidth rate",
    "desc": "The auto-cost reference-bandwidth command is a factor in the formula that calculates the default OSPFv2 cost for Ethernet interfaces."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "adjacency exchange-start threshold (OSPFv2)",
    "cmd": "adjacency exchange-start threshold peers\nno adjacency exchange-start threshold\ndefault adjacency exchange-start threshold",
    "desc": "The adjacency exchange-start threshold command sets the exchange-start options for an OSPF instance."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "area default-cost (OSPFv2)",
    "cmd": "area area_id default-cost def_cost\nno area area_id default-cost def_cost\ndefault area area_id default-cost def_cost",
    "desc": "The area default-cost command specifies the cost for the default summary routes sent into a specified area."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "area filter (OSPFv2)",
    "cmd": "area area_id filter net_addr\nno area area_id filter net_addr\ndefault area area_id filter net_addr",
    "desc": "The area filter command prevents an area from receiving Type 3 Summary LSAs and Type 4 APSR Summary LSAs from a specified subnet."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "area not-so-stubby lsa type-7 convert type-5 (OSPFv2)",
    "cmd": "area area_id not-so-stubby lsa type-7 convert type-5\nno area area_id not-so-stubby lsa type-7 convert type-5\ndefault area area_id not-so-stubby lsa type-7 convert type-5",
    "desc": "The area not-so-stubby lsa type-7 convert type-5 command configures the switch to always translate Type-7 Link-State Advertisement (LSAs) to Type-5 LSAs."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "area nssa (OSPFv2)",
    "cmd": "area area_id nssa [TYPE]\nno area area_id nssa [TYPE]\ndefault area area_id nssa [TYPE]",
    "desc": "The area nssa command configures an OSPFv2 area as a Not-So-Stubby Area (NSSA)."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "area nssa default-information-originate (OSPFv2)",
    "cmd": "area area_id nssa default-information-originate [VALUE][TYPE][EXCL]\nno area area_id nssa default-information-originate\ndefault area area_id nssa default-information-originate",
    "desc": "The default area nssa default-information-originate command sets default route origination for the Not-So-Stubby Area (NSSA), allowing the redistribute policy to advertise a default route if one is present."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "area nssa no-summary (OSPFv2)",
    "cmd": "area area_id nssa no-summary\nno area area_id nssa no-summary\ndefault area area_id nssa no-summary",
    "desc": "The area nssa no-summary command configures the switch stop importing type-3 summary LSAs into the not-so-stubby area and sets the default summary route into the Not-So-Stubby Area (NSSA) in order to reach the inter-area prefixes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "area range (OSPFv2)",
    "cmd": "area area_id range net_addr [ADVERTISE_SETTING][COST_SETTING]\nno area area_id range net_addr [ADVERTISE_SETTING][COST_SETTING]\ndefault area area_id range net_addr [ADVERTISE_SETTING][COST_SETTING]",
    "desc": "The area range command configures OSPF Area Border Routers (ABRs) to consolidate or summarize routes, to set the cost setting routes, and to suppress summary route advertisements."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "area stub (OSPFv2)",
    "cmd": "area area_id stub [summarize]\nno area area_id stub [summarize]\ndefault area area_id stub [summarize]",
    "desc": "The area stub command sets the area type of an OSPF area to stub."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "clear ip ospf neighbor",
    "cmd": "clear ip ospf [PROCESS_ID] neighbor [LOCATION][VRF_INSTANCE]",
    "desc": "The clear ip ospf command clears the neighbors statistics per interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "compatible (OSPFv2)",
    "cmd": "compatible rfc1583\nno compatible rfc1583\ndefault compatible rfc1583",
    "desc": "The compatible command allows the selective disabling of compatibility with RFC 2328."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "default-information originate (OSPFv2)",
    "cmd": "default-information originate [FORCE][VALUE][TYPE][MAP]\nno default-information originate\ndefault default-information originate",
    "desc": "The default-information originate command enables default route origination for normal areas."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "distance ospf (OSPFv2)",
    "cmd": "distance ospf [external | inter-area | intra-area]\nno distance ospf [external | inter-area | intra-area]\ndefault distance ospf [external | inter-area | intra-area]",
    "desc": "The distance ospf command specifies the administrative distance for intra-area, inter-area, or external OSPF routes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "distribute-list in",
    "cmd": "distribute-list {prefix-list | route-map} list_name in\nno distribute-list {prefix-list | route-map}\ndefault distribute-list {prefix-list | route-map}",
    "desc": "A distribute list uses a route map or prefix list to filter specific routes from incoming OSPF LSAs."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "dn-bit-ignore (OSPFv2)",
    "cmd": "dn-bit-ignore\nno dn-bit-ignore\ndefault dn-bit-ignore",
    "desc": "The dn-bit-ignore command results in the DN bit in Type 3 Summary LSAs to be ignored during the Shortest Path First (SPF) calculations."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "interface Tunnel",
    "cmd": "interface Tunnel Tunnel No",
    "desc": "OSPF packets by default are sent with Time to Live (TTL) value 1."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf area",
    "cmd": "ip ospf area area_id\nno ip ospf area area_id\ndefault ip ospf area area_id",
    "desc": "The ip ospf area command enables OSPFv2 on an interface and associates the area to the interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf authentication",
    "cmd": "ip ospf authentication [METHOD]\nno ip ospf authentication\ndefault ip ospf authentication",
    "desc": "The ip ospf authentication command enables OSPFv2 authentication for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf authentication-key",
    "cmd": "ip ospf authentication-key [ENCRYPT_TYPE] key_text\nno ip ospf authentication-key\ndefault ip ospf authentication-key",
    "desc": "The ip ospf authentication-key command configures the OSPFv2 authentication password for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf cost",
    "cmd": "ip ospf cost interface_cost\nno ip ospf cost\ndefault ip ospf cost",
    "desc": "The ip ospf cost command configures the OSPFv2 cost for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf dead-interval",
    "cmd": "ip ospf dead-interval time\nno ip ospf dead-interval\ndefault ip ospf dead-interval",
    "desc": "The ip ospf dead-interval command configures the dead interval for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf disabled",
    "cmd": "ip ospf disabled\nno ip ospf disabled\ndefault ip ospf disabled",
    "desc": "The ip ospf disabled command disables OSPFv2 on the configuration mode interface without disrupting the OSPFv2 configuration."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf hello-interval",
    "cmd": "ip ospf hello-interval time\nno ip ospf hello-interval\ndefault ip ospf hello-interval",
    "desc": "The ip ospf hello-interval command configures the OSPFv2 hello interval for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf message-digest-key",
    "cmd": "ip ospf message-digest-key key_id md5 ENCRYPT_TYPE key_text\nno ip ospf message-digest-key key_id\ndefault ip ospf message-digest-key key_id",
    "desc": "The ip ospf message-digest-key command configures a message digest authentication key for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf network point-to-point",
    "cmd": "ip ospf network point-to-point\nno ip ospf network\ndefault ip ospf network",
    "desc": "The ip ospf network point-to-point command sets the configuration mode interface as a point-topoint link."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf retransmit-interval",
    "cmd": "ip ospf retransmit-interval period\nno ip ospf retransmit-interval\ndefault ip ospf retransmit-interval",
    "desc": "The ip ospf retransmit-interval command configures the link state advertisement retransmission interval for the interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf router-id output-format hostnames",
    "cmd": "ip ospf router-id output-format hostnames\nno ip ospf router-id output-format hostnames\ndefault ip ospf router-id output-format hostnames",
    "desc": "The ip ospf router-id output-format hostnames command causes the switch to display DNS names in place of numeric OSPFv2 router IDs in all OSPFv2 show commands, including: • show ip ospf • show ip ospf border-routers"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf transmit-delay",
    "cmd": "ip ospf transmit-delay trans\nno ip ospf transmit-delay\ndefault ip ospf transmit-delay",
    "desc": "The ip ospf transmit-delay command configures the transmission delay for OSPFv2 packets over the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf priority",
    "cmd": "ip ospf priority priority_level\nno ip ospf priority\ndefault ip ospf priority",
    "desc": "The ip ospf priority command configures OSPFv2 router priority for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "line system",
    "cmd": "line system\nno line system",
    "desc": "The line system command places the switch in the OSPF - Line System configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "log-adjacency-changes (OSPFv2)",
    "cmd": "log-adjacency-changes detail\nno log-adjacency-changes\ndefault log-adjacency-changes",
    "desc": "The log-adjacency-changes command enables syslog messages to be sent when it detects OSPFv2 link state changes or when it detects that a neighbor has gone up or down."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "maximum-paths (OSPFv2)",
    "cmd": "maximum-paths paths\nno maximum-paths\ndefault maximum-paths",
    "desc": "The maximum-paths command controls the number of parallel routes that OSPFv2 supports."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "max-lsa (OSPFv2)",
    "cmd": "max-lsa lsa_num [WARNING] [IGNORE_TIME][IGNORE_COUNT][RESET]\nno max-lsa\ndefault max-lsa",
    "desc": "The max-lsa command specifies the maximum number of LSAs allowed in the LSDB."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "max-metric router-lsa (OSPFv2)",
    "cmd": "max-metric router-lsa [EXTERNAL][STUB][STARTUP][SUMMARY]\nno max-metric router-lsa [EXTERNAL][STUB][STARTUP][SUMMARY]\ndefault max-metric router-lsa [EXTERNAL][STUB][STARTUP][SUMMARY]",
    "desc": "The max-metric router-lsa command configures OSPF to include the maximum value in LSA metric fields to keep other network devices from using the switch as a preferred intermediate SPF hop."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "network area (OSPFv2)",
    "cmd": "network ipv4_subnet area area_id\nno network ipv4_subnet area area_id\ndefault network ipv4_subnet area area_id",
    "desc": "The network area command assigns the specified IPv4 subnet to an OSPFv2 area."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "no area (OSPFv2)",
    "cmd": "no area area_id [TYPE]\ndefault area area_id [TYPE]",
    "desc": "The no area command removes the corresponding area command from the running-config: • no/default area not-so-stubby lsa type-7 convert type-5 commands remove the translate type7 always parameter without changing the area type."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "packet",
    "cmd": "packet packet header tokens forwarding [bridged | routed | mpls][multicast][decap]",
    "desc": "This describes packet types that the feature is applied on."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "passive-interface default (OSPFv2)",
    "cmd": "passive-interface default\nno passive-interface default\ndefault passive-interface default",
    "desc": "The passive-interface default command configures all interfaces as OSPFv2 passive by default."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "passive-interface (OSPFv2)",
    "cmd": "passive-interface INTERFACE_NAME\nno passive-interface INTERFACE_NAME\ndefault passive-interface INTERFACE_NAME",
    "desc": "The passive-interface command disables OSPFv2 on an interface range."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "point-to-point routes (OSPFv2)",
    "cmd": "point-to-point routes\nno point-to-point routes\ndefault point-to-point routes",
    "desc": "The point-to-point routes command enables the switch to maintain a local Routing Information Base (RIB) to store information it learns from its neighbors."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "redistribute (OSPFv2)",
    "cmd": "redistribute ROUTE_TYPE [ROUTE_MAP]\nno redistribute ROUTE_TYPE [ROUTE_MAP]\ndefault redistribute ROUTE_TYPE [ROUTE_MAP]",
    "desc": "The redistribute command enables the advertising of all specified routes on the switch into the OSPFv2 domain as external routes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "redistribute ospf",
    "cmd": "redistribute ospf [include [leaked] | match [external | internal | nssa-external] | route-map word]\nno redistribute ospf [match [external | internal | nssa-external]\ndefault redistribute ospf [match [external | internal | nssa-external]",
    "desc": "Redistributing connected routes causes the OSPFv2 instance to advertise all connected routes on the switch as external OSPFv2 routes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "redistribute ospf instance",
    "cmd": "redistribute ospf instance [OPTIONS]",
    "desc": "The redistribute ospf instance command redistributes either the non-leaked routes, or both leaked and non-leaked routes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "router ospf",
    "cmd": "router ospf process_id [VRF_INSTANCE]\nno router ospf process_id [VRF_INSTANCE]\ndefault router ospf process_id [VRF_INSTANCE]",
    "desc": "The router ospf command places the switch in router-ospf configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "router-id (OSPFv2)",
    "cmd": "router-id [identifier]\nno router-id [identifier]\ndefault router-id [identifier]",
    "desc": "The router-id command assigns a router ID for an OSPFv2 instance."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show hardware tcam profile",
    "cmd": "show hardware tcam profile [profile] detail",
    "desc": "Use the show hardware tcam profile command to verify that the user-defined-tcam profile is applied correctly without errors on the DCS-7020, DCS-7280R/R2, or DCS-7500R/R2 platforms."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf border-routers",
    "cmd": "show ip ospf border-routers [VRF_INSTANCE]",
    "desc": "The show ip ospf border-routers command displays the internal OSPFv2 routing table entries to Area Border Routers (ABRs) and Autonomous System Boundary Routers (ASBRs) for each of the OSPFv2 areas."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "Area",
    "cmd": "Area",
    "desc": "OSPFv2 Commands"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf database database-summary",
    "cmd": "show ip ospf [AREA] database database-summary [VRF_INSTANCE]",
    "desc": "The show ip ospf database database-summary command displays the number of link state advertisements in the OSPFv2 database."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf database <link state list>",
    "cmd": "show ip ospf [AREA] database[ROUTER] [VRF_INSTANCE]",
    "desc": "The show ip ospf database <link state list> command displays the OSPFv2 link state advertisements that originate on a specified switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf database <link-state details>",
    "cmd": "show ip ospf [AREA] database LINKSTATE_TYPE linkstate_id [ROUTER] [VRF_INSTANCE]",
    "desc": "The show ip ospf database command displays details of the specified link state advertisements."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf interface brief",
    "cmd": "show ip ospf [PROCESS_ID] interface brief [VRF_INSTANCE]",
    "desc": "The show ip ospf interface brief command displays a summary of OSPFv2 information."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf interface",
    "cmd": "show ip ospf [PROCESS_ID] interface [INTERFACE_NAME][VRF_INSTANCE]",
    "desc": "The show ip ospf interface command displays interface information that is related to OSPFv2."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf lsa-log",
    "cmd": "show ip ospf [PROCESS_ID] ospf-log",
    "desc": "The show ip ospf lsa-log command displays log entries when LSA update messages are sent or received for OSPF."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf neighbor adjacency-changes",
    "cmd": "show ip ospf neighbor [INTERFACE_NAME][NEIGHBOR] adjacency-changes",
    "desc": "The show ip ospf neighbor adjacency-changes command displays the OSPFv2 neighbor adjacency change log for specified interfaces."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf neighbor state",
    "cmd": "show ip ospf neighbor state STATE_NAME [VRF_INSTANCE]",
    "desc": "The show ip ospf neighbor state command displays the state information on OSPF neighbors on a per-interface basis."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf neighbor summary",
    "cmd": "show ip ospf [PROCESS_ID] neighbor summary [VRF_INSTANCE]",
    "desc": "The show ip ospf neighbor summary command displays a single line of summary information for each OSPFv2 neighbor."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf neighbor",
    "cmd": "show ip ospf [PROCESS_ID] neighbor [INTERFACE_NAME] [NEIGHBOR] [DATA] [VRF_INSTANCE]",
    "desc": "The show ip ospf neighbor command displays OSPFv2 neighbor information for specified interfaces."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf request queue",
    "cmd": "show ip ospf request queue [VRF_INSTANCE]",
    "desc": "The show ip ospf request queue command displays a list of all OSPFv2 Link State Advertisements (LSAs) requested by a router."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf retransmission queue",
    "cmd": "show ip ospf retransmission queue [VRF_INSTANCE]",
    "desc": "The show ip ospf retransmission queue command displays a list of all OSPFv2 Link State Advertisements (LSAs) waiting to be re-sent."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ip ospf",
    "cmd": "show ip ospf [PROCESS_ID][VRF_INSTANCE]",
    "desc": "The show ip ospf command displays OSPFv2 routing information • PROCESS_ID OSPFv2 process ID."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show line system dom thresholds",
    "cmd": "show line system [[port RANGE] dom thresholds]",
    "desc": "The show line system dom thresholds command reports DOM information reported by the OSFPLS module."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show line system status",
    "cmd": "show line system [port RANGE] status",
    "desc": "The show line system status command displays module status."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "summary-address",
    "cmd": "summary-address {ip_address subnet_mask | ip_prefix} [attribute_map WORD | not_advertise | tag]\ndefault summary-address {ip_address summary_mask | ip_prefix}\nno summary-address {ip_address summary_mask | ip_prefix}",
    "desc": "The summary-address command allows aggregation of external routes advertised by an OSPF ASBR."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "system profile",
    "cmd": "system profile profilename",
    "desc": "Use the system profile command to apply the user defined TCAM profile to the system."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "timers lsa rx min interval (OSPFv2)",
    "cmd": "timers lsa rx min interval lsa_time\nno timers lsa rx min interval\ndefault timers lsa rx min interval",
    "desc": "The timers lsa rx min interval command sets the minimum interval for acceptance of identical Link State Advertisements (LSAs) from OSPFv2 neighbors."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "timers lsa tx delay initial (OSPFv2)",
    "cmd": "timers lsa tx delay initial [initial_delay | min_hold | max_wait]\nno timers lsa tx delay initial\ndefault timers lsa tx delay initial",
    "desc": "The timers lsa tx delay initial command sets the rate-limiting values for OSPF link-state advertisement generation."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "timers spf delay initial (OSPFv2)",
    "cmd": "timers spf delay initial [initial_delay | hold_interval | max_interval]\nno timers spf\ndefault timers spf",
    "desc": "The purpose of SPF throttling is to delay Shortest Path First (SPF) calculations when network topology is changing rapidly."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "tunnel routes",
    "cmd": "tunnel routes\nno tunnel routes\ndefault tunnel routes",
    "desc": "Use the tunnel routes command or the default form of the command to enable OSPFv2 routes over GRE tunnels."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "Flood Pacing",
    "cmd": "Flood Pacing",
    "desc": "OSPFv3 flood pacing allows configuring the minimum interval between the transmission of consecutive Link State (LS) update packets in a network."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "IP Routing",
    "cmd": "ipv6 router ospf 9",
    "desc": "OSPFv3 requires enabling IPv6 unicast routing on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "Interface vlan3911 LSDB",
    "cmd": "Interface vlan3911 LSDB",
    "desc": "Type LNK LNK Link ID"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "area authentication ipsec spi",
    "cmd": "area area_id authentication ipsec spi spi_value {md5|sha1} passphrase {0 unencrypted_key | 7\nhidden_key | LINE}\nno area area_id authentication ipsec spi spi_value {md5| sha1} passphrase {0 unencrypted_key |\ndefault area area_id authentication ipsec spi spi_value {md5| sha1} passphrase {0\nunencrypted_key | 7 hidden_key | LINE}",
    "desc": "The area authentication ipsec spi command configures OSPFv3 authentication on an area."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "area encryption ipsec spi",
    "cmd": "area area_id encryption ipsec spi spi_value esp null{md5 | sha1} { 0 unencrypted_key | 7\nencrypted_key | KEY}\nno area area_id encryption\ndefault area area_id encryption",
    "desc": "The area encryption ipsec spi command configures OSPFv3 security on an area."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "area stub (OSPFv3)",
    "cmd": "area area_id stub\nno area area_id stub\ndefault area area_id stub",
    "desc": "The area stub command configures the area type of an OSPFv3 area."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "clear ospfv3 ipv6 force-spf",
    "cmd": "clear ospfv3 ipv6 force-spf [VRF_INSTANCE]",
    "desc": "The clear ospfv3 ipv6 force-spf command starts the SPF algorithm without clearing the OSPF database."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "default-information originate (OSPFv3)",
    "cmd": "default-information originate [DURATION always][VALUE metric 1-65535][TYPE][metric-type\nno default-information originate\ndefault default-information originate",
    "desc": "The default-information originate command generates a default external route into an OSPF domain."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "default-metric (OSPFv3)",
    "cmd": "default-metric def_metric\nno default-metric\ndefault default-metric",
    "desc": "The default-metric command sets default metric value for routes redistributed into the OSPFv3 domain."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "distance ospf intra-area (OSPFv3)",
    "cmd": "distance ospf intra-area distance\nno distance ospf intra-area\ndefault distance ospf intra-area",
    "desc": "The distance ospf intra-area command sets the administrative distance for routes in a single OSPFv3 area."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ipv6 ospf area",
    "cmd": "ipv6 ospf process_id [area area_id]\nno ipv6 ospf process_id [area area_id]\ndefault ipv6 ospf process_id [area area_id]",
    "desc": "The ipv6 ospf area command enables OSPFv3 on the interface and associates the area to the interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ipv6 router ospf",
    "cmd": "ipv6 router ospf process_id [VRF_INSTANCE vrf vrf_name]\nno ipv6 router ospf process_id [ VRF_INSTANCE vrf vrf_name]\ndefault ipv6 router ospf process_id [ VRF_INSTANCE vrf vrf_name]",
    "desc": "The ipv6 router ospf command places the switch in router-OSPFv3 configuration mode and creates and OSPFv3 instance if one does not already exist."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "log-adjacency-changes (OSPFv3)",
    "cmd": "log-adjacency-changes [INFO_LEVEL detail]\nno log-adjacency-changes\ndefault log-adjacency-changes",
    "desc": "The log-adjacency-changes command enables syslog messages to be sent when it detects OSPFv3 link state changes or when it detects that a neighbor has gone up or down."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ospfv3 transmit-delay",
    "cmd": "ospfv3 transmit-delay trans\nno ospfv3 transmit-delay\ndefault ospfv3 transmit-delay",
    "desc": "Theospfv3 transmit-delay command configures the transmission delay for OSPFv3 packets."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ospfv3 authentication ipsec spi",
    "cmd": "ospfv3 authentication ipsec spi spi_value {md5 | sha1}{0 unencrypted_key | 7 hidden_key |\nospfv3 authentication ipsec spi spi_value {md5 | sha1} passphrase{0 unencrypted_passphrase |\nno ospfv3 authentication\ndefault ospfv3 authentication",
    "desc": "The ospfv3 authentication ipsec spi command configures OSPFv3 authentication on an interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ospfv3 cost",
    "cmd": "ospfv3 cost interface_cost\nno ospfv3 cost\ndefault ospfv3 cost",
    "desc": "The ospfv3 cost command sets the OSPFv3 cost for the interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ospfv3 dead-interval",
    "cmd": "ospfv3 dead-interval time\nno ospfv3 dead-interval\ndefault ospfv3 dead-interval",
    "desc": "The ospfv3 dead-interval command sets the OSPFv3 dead interval."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ospfv3 encryption ipsec spi",
    "cmd": "ospfv3 encryption ipsec spi spi_value esp {3des-cbc | aes-128-cbc | aes-128-cbc | aes-192-cbc}{0\nunencrypted_key | 7 encrypted_key} {md5 | sha1}{0 unencrypted_key | 7 encrypted_key | KEY}\nencrypted_passphrase | LINE}\nospfv3 encryption ipsec spi spi_value esp null {md5 | sha1}{0 unencrypted_key | 7 encrypted_key\nospfv3 encryption ipsec spi spi_value esp {md5 | sha1} passphrase {0 unencrypted_passphrase |\ndefault ospfv3 encryption\nno ospf3 encryption",
    "desc": "The ospfv3 encryption ipsec spi command configures OSPFv3 security on an interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ospfv3 hello-interval",
    "cmd": "ospfv3 hello-interval time\nno ospfv3 hello-interval\ndefault ospfv3 hello-interval",
    "desc": "The ospfv3 hello-interval command sets the OSPFv3 hello interval."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ospfv3 ipv6 retransmit-interval",
    "cmd": "ospfv3 ipv6 retransmit-interval period\nno ospfv3 ipv6 retransmit-interval\ndefault ospfv3 ipv6 retransmit-interval",
    "desc": "The ospfv3 ipv6 retransmit-interval command configures the link state advertisement retransmission interval."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ospfv3 network",
    "cmd": "ospfv3 network point-to-point\nno ospfv3 network\ndefault ospfv3 network",
    "desc": "The ospfv3 network command sets the configuration mode interface as a point-to-point link."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ospfv3 priority",
    "cmd": "ospfv3 priority priority_level\nno ospfv3 priority\ndefault ospfv3 priority",
    "desc": "The ospfv3 priority command configures the OSPFv3 router priority."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "redistribute (OSPFv3)",
    "cmd": "redistribute ROUTE_TYPE ROUTE_MAP\nno redistribute ROUTE_TYPE\ndefault redistribute ROUTE_TYPE",
    "desc": "The redistribute command enables the advertising of all specified routes into the OSPFv3 domain as external routes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "router-id (OSPFv3)",
    "cmd": "router-id identifier\nno router-id\ndefault router-id",
    "desc": "The router-id command assigns the router ID for an OSPFv3 instance."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf border-routers",
    "cmd": "show ipv6 ospf border-routers [VRF_INSTANCE vrf vrf_name]",
    "desc": "The show ipv6 ospf border-routers command displays the OSPF routing table entries."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf database link if-name",
    "cmd": "show ipv6 ospf database link if-name [INTF_ID][LS_ID][ROUTER][DATA_LEVEL]",
    "desc": "The show ipv6 ospf database link command displays link state advertisement details."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf database link if-type",
    "cmd": "show ipv6 ospf database link if-type [INTF_TYPE][LS_ID][ROUTER][DATA_LEVEL]",
    "desc": "The show ipv6 ospf database link command displays information of the link state advertisements."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf database <link state list>",
    "cmd": "show ipv6 ospf database [FILTER][LINKSTATE_ID][ROUTER][DATA_LEVEL]",
    "desc": "The show ipv6 ospf database command displays the OSPF link state advertisements that originate on a switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf database link",
    "cmd": "show ipv6 ospf database link [LINKSTATE_ID][ROUTER][DATA_LEVEL]",
    "desc": "The show ipv6 ospf database link command displays details of the specified link state advertisements."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf database",
    "cmd": "show ipv6 ospf database [VRF_INSTANCE vrf vrf_name]",
    "desc": "The show ipv6 ospf database command displays data from the OSPF database."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf database <link-state details>",
    "cmd": "show ipv6 ospf database [FILTER][LINK_TYPE][LINKSTATE_ID][ROUTER][DATA_LEVEL]",
    "desc": "The show ipv6 ospf database <link-state details> command displays detailed information about the specified link state advertisements."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf interface",
    "cmd": "show ipv6 ospf interface [VRF_INSTANCE]",
    "desc": "The show ipv6 ospf interface command displays OSPFv3 information on interfaces where OSPFv3 is enabled."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf lsa-log",
    "cmd": "show ipv6 ospf [PROCESS_ID] lsa-log [VRF_INSTANCE]",
    "desc": "The show ipv6 ospf lsa-log command displays log entries when LSA update messages are sent or received for OSPFv3."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf neighbor state",
    "cmd": "show ipv6 ospf neighbor state STATE_NAME [VRF_INSTANCE ]",
    "desc": "The show ipv6 ospf neighbor state command displays the state information on OSPF neighbors on a per-interface basis."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf neighbor summary",
    "cmd": "show ipv6 ospf neighbor summary [VRF_INSTANCE]",
    "desc": "The show ipv6 ospf neighbor summary command displays a single line of state information for each OSPFv3 neighbor."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf neighbor",
    "cmd": "show ipv6 ospf neighbor [VRF_INSTANCE]",
    "desc": "The show ipv6 ospf neighbor command displays OSPFv3 neighbor information."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf spf-log",
    "cmd": "show ipv6 ospf [PROCESS_ID] spf-log [VRF_INSTANCE]",
    "desc": "The show ipv6 ospf spf-log command displays when and how long the switch took to run a full SPF calculation for OSPFv3."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ipv6 ospf",
    "cmd": "retransmission-list | spf-log | vrf ] Process ID",
    "desc": "The show ipv6 ospf command displays information about OSPFv3 routing."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "show ospfv3",
    "cmd": "show ospfv3",
    "desc": "The show ospfv3 command displays the OSPFv3 configuration of OSPFv3 address family and routing process."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "timers lsa tx delay initial (OSPFv3)",
    "cmd": "timers lsa tx delay initial [initial_delay]|[min_hold]|[max_wait]\nno timers lsa tx delay initial\ndefault timers lsa tx delay initial",
    "desc": "The timers lsa tx delay initial command sets the rate-limiting values for OSPFv3 Link-State Advertisement (LSA) generation."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "timers spf delay initial (OSPFv3)",
    "cmd": "timers spf delay initial [initial_delay]|[hold_interval]|[max_interval]\nno timers spf\ndefault timers spf",
    "desc": "The purpose of SPF throttling is to delay Shortest Path First (SPF) calculations when network topology is changing rapidly."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "timers",
    "cmd": "timers {lsa | out-delay| pacing | throttle}\nno timers {lsa | out-delay| pacing | throttle}\ndeault timers {lsa | out-delay| pacing | throttle}",
    "desc": "The timers command configures the minimum interval between the transmission of consecutive LS update packets in a network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "of RFC8667.",
    "cmd": "of RFC8667.",
    "desc": "The following enhancements are available by release: • EOS Release 4."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Dynamic Link Delay using TWAMP Light",
    "cmd": "Dynamic Link Delay using TWAMP Light",
    "desc": "Overview of Link Delay using Two-Way Active Measurement Protocol (TWAMP) EOS provides TWAMP support as a protocol used for active network performance monitoring."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ip route",
    "cmd": "show ip route",
    "desc": "When services like LDP pseudowires, BGP LU, L2 EVPN, or L3 MPLS VPN use IS-IS SR tunnels as an underlay, these services are automatically protected by TI-LFA tunnels that protect the IS-IS SR tunnels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "level 2: number dis interfaces: 1, LSDB size: 1 switch>",
    "cmd": "level 2: number dis interfaces: 1, LSDB size: 1 switch>",
    "desc": "• This command displays the SPF interval information about IS-IS instances."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "level 1: number dis interfaces: 0, LSDB size: 1",
    "cmd": "level 1: number dis interfaces: 0, LSDB size: 1",
    "desc": "level 2: number dis interfaces: 0, LSDB size: 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "L1",
    "cmd": "L1",
    "desc": "* 1.0.8.1/32 Node R:0 N:1 P:0 E:0 V:0 L:0"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis segment-routing prefix-segments",
    "cmd": "show isis segment-routing prefix-segments",
    "desc": "The show isis segment-routing prefix-segments command provides the details of all prefix segments being originated as well the segments received from IS-IS SR speakers in the domain."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "address-family",
    "cmd": "address-family [ipv4 | ipv6][MODE]\nno address-family [ipv4 | ipv6][MODE]\ndefault address-family [ipv4 | ipv6][MODE]",
    "desc": "The address-family command places the switch in address-family configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "adjacency-segment",
    "cmd": "adjacency-segment [ipv4|ipv6] p2p [multiple][label label | indexindex] backup-eligible\nno adjacency-segment [ipv4 | ipv6]p2p [multiple][label label|index index] backup-eligible\ndefault adjacency-segment [ipv4 | ipv6]p2p multiple][label label|index index] backup-eligible",
    "desc": "Use the adjacency-segment command in the interface configuration mode to have the PLR computes backup paths for an adjacency segment only if the Adjacency SID sub-TLV has the B-flag (backup flag) set."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "adjacency-segment (allocation)",
    "cmd": "adjacency-segment allocation [all-interface |none | sr-peers]",
    "desc": "The adjacency-segment command allocates adjacency segments to all IS-IS adjacencies, or only those adjacencies which are to IS-IS routers that have advertised IS-IS SR capability, or to none of the adjacencies."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "adjacency-segment (static)",
    "cmd": "adjacency-segment ipv4 | ipv6 p2p [[label label-value]|[index index-value global]]",
    "desc": "The adjacency-segment command configures IS-IS adjacencies statically on the switch, so that these values are preserved even when the switch restarts."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "advertise interface-address passive-only",
    "cmd": "advertise interface-address passive-only",
    "desc": "The advertise interface-address passive-only command configures IS-IS to advertise interface addresses for passive interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "advertise ip-reachability passive-only",
    "cmd": "advertise ip-reachability passive-only",
    "desc": "The advertise ip-reachability passive-only allows the configuration of advertising IS-IS IP reachability TLVs for passive and nonpassive interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "area leader",
    "cmd": "area leader [disabled | level-1 [disabled] | level-2 [disabled] | priority [num [level-1 | level-2]]]\nno area leader\ndefault area leader",
    "desc": "Use the area leader command to tune or disable the area leader election process."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "authentication key",
    "cmd": "authentication key [0 | 7] [LAYER_VALUE]\nno authentication key [0 | 7] [LAYER_VALUE]\ndefault authentication key [0 | 7] [LAYER_VALUE]",
    "desc": "Theauthentication key command configures the authentication key for the IS-IS instance causing LSPs, CSNPs and PSNPs to be authenticated."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "authentication mode",
    "cmd": "authentication mode [md5 | text] [LAYER_VALUE]\nno authentication mode [md5 | text] [LAYER_VALUE]\ndefault authentication mode [md5 | text] [LAYER_VALUE]",
    "desc": "The authentication mode command configures authentication for the IS-IS instance causing LSPs, CSNPs, and PSNPs to be authenticated."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "bfd all-interfaces",
    "cmd": "bfd all-interfaces",
    "desc": "The bfd all-interfaces command enables Bidirectional Forwarding Detection (BFD) for all IS-ISenabled interfaces in the IPv4 or IPv6 address family."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "clear isis database",
    "cmd": "clear isis [INSTANCE] database {LSPID | all | level-1 | level-2}",
    "desc": "The clear isis database command clears a specific LSP with a predefined LSP ID, or LSPs at a given level, or all LSPs in the database."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "clear isis instance",
    "cmd": "clear isis instance vrf vrf_name",
    "desc": "the clear isis instance clears an IS-IS instance or all instances."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "clear isis neighbor",
    "cmd": "clear isis neighbor {Neighbor-ID | all | interface} [level-1 | level-2 | level-1-2]",
    "desc": "The clear isis neighbor command clears IS-IS adjacencies that exist on an interface, or at a specific level, or the adjacencies formed with a given neighbor (either with a system ID or a hostname)."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "event-monitor convergence",
    "cmd": "event-monitor convergence vrf default event route convergence protocol isis\nno event-monitor convergence\ndefault event-monitor convergence",
    "desc": "The event-monitor convergence command enters the Event Monitor Convergence Configuration Mode and allows sending IS-IS convergence events to a database."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "fast-flooding profile",
    "cmd": "fast-flooding all-interfaces profile profile_name [lsp [burst size size_value]\nno fast-flooding",
    "desc": "The fast-flooding profile command in the Router IS-IS Configuration Mode enables Fast Flooding on Point-2-Point (P2P) links and enables faster network convergence for a consistent Link State Database (LSDB) for Link State Interior Gateway Protocols (IGPs)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "fast-reroute ti-lfa mode",
    "cmd": "fast-reroute ti-lfa mode [[[ link-protection | node-protection][level-1 | level-2]] | disabled]",
    "desc": "Use the fast-reroute ti-lfa mode to enable link or node protection for node segments and adjacency segments of a specific address-family learned on all IS-IS interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "fast-reroute ti-lfa srlg",
    "cmd": "fast-reroute ti-lfa srlg [strict]",
    "desc": "Use the fast reroute ti-lfa srlg command to enable SRLG protection on all interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "graceful-restart (IS-IS)",
    "cmd": "graceful-restart t2 | restart-hold-time value\nno graceful-restart t2 | restart-hold-time value\ndefault graceful-restart t2 | restart-hold-time value",
    "desc": "The graceful-restart command configures IS-IS graceful-restart."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "is-hostname",
    "cmd": "is-hostname string\nno is-hostname",
    "desc": "The is-hostname command configures the use of a human-readable string to represent the symbolic name of an IS-IS router."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis authentication key",
    "cmd": "isis authentication key [0 | 7] [LAYER_VALUE]\nno isis authentication key [0 | 7] [LAYER_VALUE]\ndefault isis authentication key [0 | 7] [LAYER_VALUE]",
    "desc": "The isis authentication key command configures the authentication key on the interface causing ISIS Hellos to be authenticated."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis authentication mode",
    "cmd": "isis authentication mode [md5 | text][LAYER_VALUE]\nno isis authentication mode [md5 | text][LAYER_VALUE]\ndefault isis authentication mode [md5 | text][LAYER_VALUE]",
    "desc": "The isis authentication mode command configures authentication on the interface causing IS-IS Hellos to be authenticated."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis bfd",
    "cmd": "isis bfd\nno isis bfd\ndefault isis bfd",
    "desc": "The isis bfd command activates the corresponding IS-IS routing instance on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis enable",
    "cmd": "isis enable instance_id\nno isis enable\ndefault isis enable",
    "desc": "The isis enable command activates the corresponding IS-IS routing instance on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis fast-reroute ti-lfa mode",
    "cmd": "isis fast-reroute ti-lfa mode [link-protection | node-protection | disabled]\nno isis fast-reroute ti-lfa mode [link-protection | node-protection | level-1 |\ndefault isis fast-reroute ti-lfa mode [link-protection | node-protection |\ndisabled][level-1 | level-2]",
    "desc": "Use the isis fast-reroute ti-lfa mode command to enable link or node protection for node segments and adjacency segments learned on a specific IS-IS interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis hello-interval",
    "cmd": "isis hello-interval time\nno isis hello-interval\ndefault isis hello-interval",
    "desc": "The isis hello-interval command sends Hello packets from applicable interfaces to maintain the adjacency through the transmitting and receiving of Hello packets."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis hello-multiplier",
    "cmd": "isis hello-multiplier factor\nno isis hello-multiplier\ndefault isis hello-multiplier",
    "desc": "The isis hello-multiplier command specifies the number of IS-IS hello packets missed by a neighbor before the adjacency is considered down."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis address-family fast-reroute ti-lfa srlg",
    "cmd": "isis [ipv4 | ipv6] unicast fast-reroute ti-lfa [mode | srlg] [strict |\ndisabled]\nno isis [ipv4 | ipv6] unicast fast-reroute ti-lfa [mode | srlg] [strict |\ndisabled]\ndefault isis [ipv4 | ipv6] unicast fast-reroute ti-lfa [mode | srlg] [strict",
    "desc": "Use the isis address-family fast-reroute ti-lfa srlg command to enable protection selectively on a specific interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis ipv6 metric",
    "cmd": "isis ipv6 metric metric_value\nno isis ipv6 metric\ndefault isis ipv6 metric",
    "desc": "The isis ipv6 metric command configures the IPv6 metric."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis lsp tx interval",
    "cmd": "isis lsp tx interval period\nno isis lsp tx interval\ndefault isis lsp tx interval",
    "desc": "The isis lsp tx interval command sets the interval at which IS-IS sends link-state information on the interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis metric",
    "cmd": "isis metric metric_cost\nno isis metric\ndefault isis metric",
    "desc": "The isis metric command sets cost for sending information over an interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis multi-topology",
    "cmd": "isis multi-topology address-family ipv4 unicast\nno isis multi-topology address-family ipv4 unicast\ndefault isis multi-topology address-family ipv4 unicast",
    "desc": "The isis multi-topology command configures the IPv4 or IPv6 address family individually on an interface with both IPv4 and IPv6 addresses."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis network",
    "cmd": "isis network point-to-point\nno isis network\ndefault isis network",
    "desc": "The isis network command sets the configuration mode interface as a point-to-point link."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis passive",
    "cmd": "isis passive\nno isis passive\ndefault isis passive",
    "desc": "The isis passive command configures the configuration-mode interface as passive."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "isis priority",
    "cmd": "isis priority priority_level\nno isis priority\ndefault isis priority",
    "desc": "The isis priority command sets the IS-IS priority for the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "is-type",
    "cmd": "is-type LAYER_VALUE",
    "desc": "The is-type command configures the routing level for an IS-IS instance."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "log-adjacency-changes (IS-IS)",
    "cmd": "log-adjacency-changes\nno log-adjacency-changes\ndefault log-adjacency-changes",
    "desc": "The log-adjacency-changes command sets the switch to send Syslog messages when it detects link state changes or when it detects that a neighbor state has changed."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "lsp dynamic flooding",
    "cmd": "lsp flood dynamic [level-1 | level-2]\nno lsp flood dynamic [level-1 | level-2]\ndefault lsp flood dynamic [level-1 | level-2]",
    "desc": "Use the lsp flooding dynamic command to configure dynamic flooding."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "match isis level",
    "cmd": "match isis level [level-1 | level-2]\nno match isis level [level-1 | level-2]\ndefault match isis level [level-1 | level-2]",
    "desc": "The match isis level command configures a route map to match on ISIS level."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "monitor twamp",
    "cmd": "monitor twamp twamp-light",
    "desc": "The monitor twamp twamp-light command enters the TWAMP configuration mode and allows the configuration of TWAMP profiles to initiate TWAMP reflection on an IS-IS network."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "mpls label range",
    "cmd": "mpls label range value",
    "desc": "The mpls label range command derives the indices of the actual MPLS label on the SRGB advertised by the router."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "multi-topology",
    "cmd": "multi-topology\nno multi-topology\ndefault multi-topology",
    "desc": "The multi-topology command configures IS-IS Multi-Topology (MT) support (disabled by default), enabling an IS-IS router to compute a separate topology for IPv4 and IPv6 links in the network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "net",
    "cmd": "net mask_hex\nno net\ndefault net",
    "desc": "The net command configures the Network Entity Title of the IS-IS instance."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "node-segment",
    "cmd": "node-segment [ipv4 | ipv6] index value",
    "desc": "The node-segment command associates the node segments with prefix mask length /32 (IPV4) or /128 (IPV6) addresses."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "passive (IS-IS)",
    "cmd": "passive INTERFACE_NAME\nno passive INTERFACE_NAME\ndefault passive INTERFACE_NAME",
    "desc": "The passive command configures the specified IS-IS interface as passive."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "prefix-segment",
    "cmd": "prefix-segment ip-address index value",
    "desc": "The prefix-segment command associates prefix segments with any IS-IS prefix a router is originating an IP Reachability TLV for."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "proxy-node-segment",
    "cmd": "proxy-node-segment ip-address index index_value range value conflict ignore",
    "desc": "The proxy-node-segment command configures a proxy-node-SID for a IS-IS prefix originating from the router that does not support IS-IS SR."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "proxy-node-segment mpls",
    "cmd": "proxy-node-segment mpls [fallback | pop | forward]",
    "desc": "The proxy-node-segment mpls command allows the configuration of an MPLS route to forward traffic to the IGP next-hop for the loopback."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "redistribute (IS-IS)",
    "cmd": "redistribute ROUTE_TYPE\nno redistribute ROUTE_TYPE\ndefault redistribute ROUTE_TYPE",
    "desc": "The redistribute command redistributes the specified types of routes into IS-IS."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "redistribute bgp route-map",
    "cmd": "redistribute bgp route-map map_name\nno redistribute bgp\ndefault redistribute ROUTE_TYPE",
    "desc": "The redistribute bgp route-map command redistributes the BGP routes from the specified route map into IS-IS."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "router isis",
    "cmd": "router isis instance_name [VRF_INSTANCE]\nno router isis instance_name\ndefault router isis instance_name",
    "desc": "The router isis command places the switch in router ISIS configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "segment-routing mpls",
    "cmd": "segment-routing mpls\nno segment-routing mpls\ndefault segment-routing mpls",
    "desc": "The segment-routing mpls command places the switch in the segment-routing mpls configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "set isis level",
    "cmd": "set isis level [level-1 | level-2 | level-1-2]\nno set isis level [level-1 | level-2 | level-1-2]\ndefault set isis level [level-1 | level-2 | level-1-2]",
    "desc": "The set isis level command configures a route map to set ISIS level."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "set-overload-bit",
    "cmd": "set-overload-bit [on-startup interval]\nno set-overload-bit\ndefault set-overload-bit",
    "desc": "The set-overload-bit command sets the overload bit in link state packets (LSPs) to signal that the switch is not available for forwarding transit traffic (for instance, during startup or when the switch is being"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis database",
    "cmd": "show isis database [INSTANCES][INFO_LEVEL]\nshow isis database [INFO_LEVEL] [VRF_INSTANCE]",
    "desc": "The show isis database command displays the link state database of IS-IS."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis database detail",
    "cmd": "show isis database detail [tlv]",
    "desc": "The show isis database detail command displays a view of LSPDB of different devices in the ISIS domain."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis dynamic flooding",
    "cmd": "show isis dynamic flooding nodes",
    "desc": "Use the show isis dynamic flooding command to monitor Dynamic Flooding."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis graceful-restart vrf",
    "cmd": "show isis graceful-restart vrf vrf-name",
    "desc": "The show isis graceful-restart vrf command displays the GR configuration and graceful-restart related state of the IS-IS instance as well as its neighbors."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis hostname",
    "cmd": "show isis hostname",
    "desc": "The show isis hostname command displays mapping between the System ID and IS-IS hostname."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis interface",
    "cmd": "show isis interface [INSTANCES][INTERFACE_NAME][INFO_LEVEL]\nshow isis interface [INTERFACE_NAME] [INFO_LEVEL][VRF_INSTANCE]",
    "desc": "The show isis interface command displays interface information for the IS-IS instance."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "Interface Ethernet30:",
    "cmd": "Interface Ethernet30:",
    "desc": "Index: 36 SNPA: 0:1c:73:c:5:7f MTU: 1497 Type: broadcast Level 2: Metric: 10, Number of adjacencies: 1 LAN-ID: 3030."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis local-convergence-delay",
    "cmd": "show isis local-convergence-delay",
    "desc": "The show isis local-convergence-delay command shows the current or last attempt at delaying the convergence of protected routes on a link down/BFD neighbor down event."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis neighbors",
    "cmd": "show isis neighbors [INSTANCES] [INFO_LEVEL]\nshow isis neighbor [INFO_LEVEL] [VRF_INSTANCE]",
    "desc": "The show isis neighbors command displays IS-IS neighbor information."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis network topology",
    "cmd": "show isis network topology\nshow isis INSTANCES network topology\nshow isis network topology VRF_INSTANCE",
    "desc": "The show isis network topology command displays a list of all IS-IS devices that are reachable in the network."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis segment-routing adjacency-segments",
    "cmd": "show isis segment-routing adjacency-segments",
    "desc": "The show isis segment-routing adjacency-segments command displays the global adjacency SID value and other related information."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis segment-routing global-blocks",
    "cmd": "show isis segment-routing global-blocks",
    "desc": "The show isis segment-routing global-blocks command lists the SRGBs in use by all SR supporting devices in IS-IS domain including the SRGB in use by IS-IS SR on this device."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis segment-routing",
    "cmd": "show isis segment-routing",
    "desc": "The show isis segment-routing command displays the summary information on IS-IS SR status."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis segment-routing tunnel",
    "cmd": "show isis segment-routing tunnel 10.0.10.1/32",
    "desc": "The show isis segment-routing tunnel command displays all the IS-IS SR tunnels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis summary",
    "cmd": "show isis summary\nshow isis [INSTANCES] summary\nshow isis summary VRF_INSTANCE",
    "desc": "The show isis summary command displays information about the configured IS-IS instances."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis ti-lfa path",
    "cmd": "show isis ti-lfa path 1111.1111.1005",
    "desc": "The show isis ti-lfa path command displays the repair path with the list of all the system IDs from the P-node to the Q-node for every destination/constraint tuple."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "exclude node 1111.1111.1002",
    "cmd": "exclude node 1111.1111.1002",
    "desc": "exclude Vlan2387 SRLG strict Path"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "show isis ti-lfa tunnel",
    "cmd": "show isis ti-lfa tunnel",
    "desc": "The TI-LFA repair tunnels are just internal constructs that are shared by multiple LFIB routes that compute similar repair paths."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor twamp-light",
    "cmd": "show monitor twamp-light [ip ip_address] detail",
    "desc": "The show monitor twamp-light displays calculated one way and two way minimum delay."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor twamp-light counters",
    "cmd": "show monitor twamp-light counters [sender | reflector | drop] detail",
    "desc": "The show monitor twamp-light counters displays packet counters for TWAMP reflection on the IS-IS network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor twamp-light raw count",
    "cmd": "show monitor twamp-light [ip | interface] raw count number",
    "desc": "The show monitor twamp-light raw displays probe packet information for TWAMP reflection on the IS-IS network."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show mpls label ranges",
    "cmd": "show mpls label ranges",
    "desc": "The show mpls label ranges command displays the MPLS label range available on a router is categorized into different pools which cater to different applications running on the router."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show mpls lfib route",
    "cmd": "show mpls lfib route [label_num]",
    "desc": "The show mpls lfib route command displays the LFIB information for a specified route or for all routes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show mpls segment-routing bindings",
    "cmd": "show mpls segment-routing bindings",
    "desc": "The show mpls segment-routing bindings command displays the local label bindings and label bindings on the peer routers for each prefix that has a segment advertised."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show tunnel fib",
    "cmd": "show tunnel fib ti-lfa 1",
    "desc": "The show tunnel fib command that displays tunnels programmed in the tunnel FIB also includes the TILFA tunnels along with protected IS-IS SR tunnels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "spf-interval",
    "cmd": "spf-interval { max-wait seconds | max-wait milliseconds} [initial-wait milliseconds |\nhold-time milliseconds]\nno spf-interval\ndefault spf-interval",
    "desc": "The spf-interval command sets the Shortest Path First (SPF) timer that defines the interval between ISIS path calculations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "timers local-convergence-delay",
    "cmd": "timers local-convergence-delay [delay_in_seconds] protected-prefixes",
    "desc": "The Point of Local Repair (PLR) switches to the TI-LFA backup path on link failure or BFD neighbor failure but switches back to the post-convergence path once the PLR computes SPF and updates its LFIB."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "timers lsp out-delay",
    "cmd": "timers lsp out-delay transmit_delay\nno timers lsp out-delay\ndefault timers lsp out-delay",
    "desc": "The timers lsp out-delay command in the IS-IS Router Configuration Mode forces a router to pause before flooding self-originated LSPs after a link or metric decrease event and prevents micro-loops from"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Conceptual Overview",
    "cmd": "BGP Conceptual Overview",
    "desc": "Using TCP sessions, the BGP protocol exchanges routing information among neighboring routers in different autonomous systems."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Confederations",
    "cmd": "BGP Confederations",
    "desc": "BGP confederations divide an Autonomous System (AS) into subsystems (sub-ASs), each identified by a unique sub-AS number while appearing externally as a single AS."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Convergence",
    "cmd": "BGP Convergence",
    "desc": "BGP supports convergence, which waits for all peers to join and receive all the routes from other peers."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Communities",
    "cmd": "BGP Communities",
    "desc": "A BGP community is a group of subnet address prefixes that share a common identifying attribute."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Graceful Shutdown Community",
    "cmd": "BGP Graceful Shutdown Community",
    "desc": "Autonomous System Boundary Routers (ASBRs) do not update all paths received from external BGP sessions and routers."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Labeled-Unicast (LU) Path Nexthop Resolution over Tunnel RIB Entries",
    "cmd": "BGP Labeled-Unicast (LU) Path Nexthop Resolution over Tunnel RIB Entries",
    "desc": "BGP Labeled-Unicast Protocol (BGP LU) path next-hop is enhanced to allow BGP in ribd mode to support resolution of BGP LU path next-hop over entries in the Tunnel RIB and fall-back to resolving over connected"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "labels [111] from 100.100.100.1 (100.100.100.1)",
    "cmd": "labels [111] from 100.100.100.1 (100.100.100.1)",
    "desc": "Origin IGP, metric 0, localpref 100, IGP metric 40, weight 0, received 21:07:07 ago, valid, external, not installed Rx SAFI: Labels Tunnel RIB eligible BGP LU path next-hop will get resolved over an ISIS SR tunnel present on R1 and R2 to reach 1."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 100.100.100.1 (100.100.100.1)",
    "cmd": "from 100.100.100.1 (100.100.100.1)",
    "desc": "Origin IGP, metric 0, localpref 200, IGP metric 0, weight 0, received 00:00:15 ago, valid, internal, best Rx SAFI: Unicast 2 100"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 1.1.1.1 (1.1.1.1)",
    "cmd": "from 1.1.1.1 (1.1.1.1)",
    "desc": "Origin IGP, metric 0, localpref 100, IGP metric 0, weight 0, received 00:04:49 ago, valid, internal Rx SAFI: Unicast 2 200 300"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 2.2.2.2 (2.2.2.2)",
    "cmd": "from 2.2.2.2 (2.2.2.2)",
    "desc": "Origin IGP, metric 0, localpref 100, IGP metric 0, weight 0, received 00:30:38 ago, valid, internal Rx SAFI: Unicast This results in pushing two labels on R1, top label is the label corresponding to ISIS SR tunnel to reach"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Selective Route Download",
    "cmd": "BGP Selective Route Download",
    "desc": "BGP Selective Route Download allows the learning and advertising of BGP routes without installing them in hardware."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Route Reflector",
    "cmd": "BGP Route Reflector",
    "desc": "A BGP route reflector is a switch within an autonomous system that forwards route information learned from iBGP peers to other iBGP peers as an alternative to a full-mesh topology."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Nexthop Resolution RIBs: EVPN and IPV4/6 Labeled-Unicast Support",
    "cmd": "BGP Nexthop Resolution RIBs: EVPN and IPV4/6 Labeled-Unicast Support",
    "desc": "Adds the BGP Nexthop Resolution RIBs feature for EVPN and labeled-unicast address families."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Additional Paths Send Optimization",
    "cmd": "BGP Additional Paths Send Optimization",
    "desc": "BGP Add-Path TX, or send, allows for a BGP speaker to advertise multiple paths (instead of a single bestpath) for a prefix towards a peering BGP speaker."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Flowspec",
    "cmd": "BGP Flowspec",
    "desc": "The EOS Release 4."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP IPv4-mapped IPv6 Address Next Hops for IPv6 Labeled-Unicast Routes",
    "cmd": "BGP IPv4-mapped IPv6 Address Next Hops for IPv6 Labeled-Unicast Routes",
    "desc": "A BGP router in an IPv4 network may need to receive or send labeled-unicast routes to and from IPv6 networks."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Monitoring Protocol for a Multi-agent Model",
    "cmd": "BGP Monitoring Protocol for a Multi-agent Model",
    "desc": "BGP Monitoring Protocol (BMP) allows a monitoring station to connect to a router and collect all BGP announcements received from the BGP peers of the router."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "BFD Commands",
    "cmd": "BFD Commands",
    "desc": "BFD Configuration Command • bfd echo • bfd interval • bfd local-address • bfd neighbor • bfd per-link • bfd slow-timer • hardware acceleration disabled • session stats snapshot interval (BFD) BFD Display Commands"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "bfd (Router-PIM Sparse-mode)",
    "cmd": "bfd\nno bfd\ndefault bfd",
    "desc": "The bfd (Router-PIM Sparse-mode) command enables Bidirectional Forwarding Detection (BFD) globally for use as a failure-detection mechanism for Protocol-Independent Multicast Sparse-Mode (PIM-SM) on the switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "bfd default (ISIS)",
    "cmd": "bfd default",
    "desc": "The bfd default command places the switch in address-family configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "bfd echo",
    "cmd": "bfd echo\nno bfd echo\ndefault bfd echo",
    "desc": "The bfd echo command enables the BFD echo function on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "bfd interval",
    "cmd": "bfd interval transmit_rate min-rx receive_minimum multiplier factor\nno bfd interval\ndefault bfd interval",
    "desc": "The bfd interval command configures the BFD control packet transmission rate, minimum control packet receive rate, and the number of missed packets that will signal that the session is down."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "bfd local-address",
    "cmd": "bfd local-address [address]\nno bfd local-address [address]\ndefault bfd local-address [address]",
    "desc": "The bfd local-address command specifies the local L3 address for use in Bidirectional Forwarding Detection (BFD)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "bfd neighbor",
    "cmd": "bfd neighbor [address ]\nno bfd neighbor [address]\ndefault bfd neighbor [address]",
    "desc": "The bfd neighbor command specifies the L3 address of the BFD neighbor of the port channel being configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "bfd per-link",
    "cmd": "bfd per-link [rfc-7130]\nno bfd per-link [rfc-7130]\ndefault bfd per-link [rfc-7130]",
    "desc": "The bfd per-link command enables the BFD per-link function on the port channel being configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "bfd slow-timer",
    "cmd": "bfd slow-timer receive_minimum\nno bfd slow-timer\ndefault bfd slow-timer",
    "desc": "The bfd slow-timer command configures the minimum reception rate for BFD control packets which will be used if the BFD echo function is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "bfd qos dscp",
    "cmd": "qos dscp DSCP_value",
    "desc": "The bfd qos dscp allows the configuration of the Differentiated Services Code Point (DSCP) for BFD traffic originating from the local switch to take advantage of Quality of Service (QoS) on the network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "hardware acceleration disabled",
    "cmd": "hardware acceleration disabled",
    "desc": "Hardware acceleration is enabled by default on supported platforms and no explicit configuration is needed."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "ip ospf neighbor bfd",
    "cmd": "ip ospf neighbor bfd\nno ip ospf neighbor bfd\ndefault ip ospf neighbor bfd",
    "desc": "The ip ospf neighbor bfd command enables Bidirectional Forwarding Detection (BFD) for the Open Shortest Path First protocol (OSPF) on the configuration mode interface regardless of the global settings for"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "neighbor bfd",
    "cmd": "neighbor NEIGHBOR_ID bfd\nno neighbor NEIGHBOR_ID bfd\ndefault neighbor NEIGHBOR_ID bfd",
    "desc": "The neighbor bfd command enables Bidirectional Forwarding Detection (BFD) for use as a failure detection mechanism for Border Gateway Protocol (BGP) connections to the specified BGP neighbor or peer group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim ipv4 bfd",
    "cmd": "pim ipv4 bfd\nno pim ipv4 bfd\ndefault pim ipv4 bfd",
    "desc": "The pim ipv4 bfd command enables Bidirectional Forwarding Detection (BFD) on the configuration mode interface as a failure detection mechanism for Protocol-Independent Multicast Sparse-Mode (PIM-SM)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show bfd hardware utilization",
    "cmd": "show bfd hardware utlization [INFO_LEVEL]",
    "desc": "The show bfd hardware utilization command displays the status of hardware acceleration on the switch for Bidirectional Forwarding Detection (BFD) session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "from 1.0.10.2 (10.0.1.1)",
    "cmd": "from 1.0.10.2 (10.0.1.1)",
    "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:53 ago, valid, external, ECMP head, ECMP, best, ECMP contributor Rx SAFI: Unicast"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "from 1.0.8.2 (10.0.4.1)",
    "cmd": "from 1.0.8.2 (10.0.4.1)",
    "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:55 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "from 1.0.9.2 (10.0.3.1)",
    "cmd": "from 1.0.9.2 (10.0.3.1)",
    "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:54 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "from 1.0.11.2 (10.0.8.1)",
    "cmd": "from 1.0.11.2 (10.0.8.1)",
    "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:52 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "from 1.0.12.2 (10.0.2.1)",
    "cmd": "from 1.0.12.2 (10.0.2.1)",
    "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:52 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "from 1.0.13.2 (10.0.5.1)",
    "cmd": "from 1.0.13.2 (10.0.5.1)",
    "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:51 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "from 1.0.14.2 (10.0.6.1)",
    "cmd": "from 1.0.14.2 (10.0.6.1)",
    "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:50 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "from 1.0.15.2 (10.0.7.1)",
    "cmd": "from 1.0.15.2 (10.0.7.1)",
    "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:49 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast switch# switch# show ip ro 1."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Peer Filter",
    "cmd": "peer-filter group1",
    "desc": "A peer filter defines a set of rules to decide whether to accept or reject the incoming peer request based on the peer’s attributes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Neighbor Route Configuration",
    "cmd": "neighbor 192.168.18.24 maximum-routes 15000",
    "desc": "Maximum Routes The neighbor maximum-routes command determines the number of BGP routes the switch accepts from a specified neighbor."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Metric",
    "cmd": "no graceful-restart-helper",
    "desc": "LocPref Weight Path 64521 i switch# Graceful Restart Graceful BGP restart allows a BGP speaker with separate control plane and data plane processing to continue forwarding traffic during a BGP restart."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Metric",
    "cmd": "ip prefix-list PL_1 permit 10.1.2.5/24",
    "desc": "- AIGP - LocPref Weight Path ? Filtering with BGP Communities Community values are assigned to a set of subnet prefixes through route map set commands."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Route Aggregation",
    "cmd": "router bgp 1",
    "desc": "Aggregation combines the characteristics of multiple routes into a single route for advertisement by the BGP speaker."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "s200 i",
    "cmd": "s200 i",
    "desc": "switch# configuration terminal switch(config)# route-map foo permit 10 switch(config-route-map-foo)# set as-path match all replacement none switch(config-route-map-foo)# exit switch(config)# router bgp 200"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "AS-path Modifications for Split ASes",
    "cmd": "AS-path Modifications for Split ASes",
    "desc": "By default, BGP rejects routes that contain the local Autonomous System Number (ASN)."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "Neighbor Address Family Configuration",
    "cmd": "router bgp 9",
    "desc": "Address family activity levels for neighbor addresses are configured through bgp default and neighbor activate commands."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 192.168.14.2 (192.168.100.21)",
    "cmd": "from 192.168.14.2 (192.168.100.21)",
    "desc": "Origin IGP, metric 0, localpref 100, weight 0, received 19:15:29 ago, valid, external, ECMP head, ECMP, best, ECMP contributor Rx SAFI: Unicast 64512 64550 65100"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 192.168.24.2 (192.168.100.22)",
    "cmd": "from 192.168.24.2 (192.168.100.22)",
    "desc": "Origin IGP, metric 0, localpref 100, weight 0, received 19:15:29 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast Not best: ECMP-Fast configured 64512 64550 65100"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 192.168.34.2 (192.168.100.23)",
    "cmd": "from 192.168.34.2 (192.168.100.23)",
    "desc": "Origin IGP, metric 0, localpref 100, weight 0, received 19:15:29 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast Not best: Redistributed route exists 64512 64550 65100"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 192.168.44.2 (192.168.100.24)",
    "cmd": "from 192.168.44.2 (192.168.100.24)",
    "desc": "Origin IGP, metric 0, localpref 100, weight 0, received 19:15:29 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast Not best: eBGP path preferred Not advertised to any peer switch#"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "from 1.0.0.1 (1.0.0.1)",
    "cmd": "show ip bgp installed",
    "desc": "Origin INCOMPLETE, metric 0, localpref 100, weight 0, valid, internal, not installed (denied by install-map) switch# The show ip bgp installed command displays the list of installed routes in the BGP RIB."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "Metric",
    "cmd": "show ip bgp not-installed",
    "desc": "LocPref Weight Path ? The show ip bgp not-installed displays the list of non-installed routes in the RIB."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "Metric",
    "cmd": "router bgp num",
    "desc": "LocPref Weight Path ? Configuring Nexthop Resolution The configuration model for this feature involves configuring and applying Nexthop Resolution RIB Profiles on a per-address family basis."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Default Resolution Profiles",
    "cmd": "Default Resolution Profiles",
    "desc": "Given the aforementioned configuration model, the default resolution profiles in EOS for each address-family can be expressed by the following: Address-family Default profile IPv4/IPv6 unicast (non 6PE)"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP L3VPNs: Next-hop Resolution ribs vrf-unicast-rib",
    "cmd": "BGP L3VPNs: Next-hop Resolution ribs vrf-unicast-rib",
    "desc": "This subfeature affects both the profile used to resolve BGP VPN routes as well as the VRF in which the route resolution takes place."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Next Hop Resolution with IGP Distance",
    "cmd": "BGP Next Hop Resolution with IGP Distance",
    "desc": "A core router with competing advertisements for the same prefixes from different Perimeter Edge (PE) routers should select the local Edge Router (ER) as the best path based on the IGP metric of resolving routes with"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 3.3.3.3 (3.3.3.3)",
    "cmd": "from 3.3.3.3 (3.3.3.3)",
    "desc": "Origin IGP, metric 0, localpref 100, IGP metric 20, weight 0, tag 0 Received 00:02:02 ago, valid, internal, best Rx SAFI: Unicast BGP routing table entry for 2."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 4.4.4.4 (4.4.4.4)",
    "cmd": "from 4.4.4.4 (4.4.4.4)",
    "desc": "Origin IGP, metric 0, localpref 100, IGP metric 30, weight 0, tag 0 Received 00:02:02 ago, valid, internal, best Rx SAFI: Unicast BGP routing table entry for 10."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Flowspec Interface-Set Extended Community",
    "cmd": "BGP Flowspec Interface-Set Extended Community",
    "desc": "BGP Flowspec leverages BGP extended communities to disseminate and apply traffic filtering rules across a network."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show bgp instance",
    "cmd": "show bgp instance [VRF_INSTANCE]",
    "desc": "The show bgp instance command displays summary Border Gateway Protocol (BGP) information about the BGP instance in the specified VRF or in all VRFs."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show bgp monitoring",
    "cmd": "show bgp monitoring summary",
    "desc": "The show bgp monitoring command displays information about the BGP Monitoring Protocol configuration on a switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show bgp monitoring active",
    "cmd": "show bgp monitoring active [summary | [station station_name]]",
    "desc": "The show bgp monitoring active command displays information about stations in Active Mode and receiving TCP connection requests from a BGP router."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show bgp neighbors history",
    "cmd": "show bgp neighbors [PEER | PREFIX | peer-group PEER_GROUP] history [connect-failures | socket",
    "desc": "The show bgp neighbors history command stores and displays a list of failed BGP connection attempts for each peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "VRF default",
    "cmd": "VRF default",
    "desc": "Type AS Time Static 65538 Mon 2019-05-13 04:16:24 Static 65538 Mon 2019-05-13 04:16:31 Static 65538 Mon 2019-05-13 04:16:39 Static 65538 Mon 2019-05-13 04:16:47 Static 65538 Mon 2019-05-13 04:16:55 Static"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show bgp monitoring station",
    "cmd": "show bgp monitoring station station_name detail",
    "desc": "The show bgp monitoring station command displays details about a specific BMP monitoring station."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show bgp summary passive",
    "cmd": "show bgp monitoring active [summary | vrf vrf_name]",
    "desc": "The show bgp monitoring passive command displays information about BMP monitoring stations with Passive mode connections."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show bgp update-group",
    "cmd": "show bgp update-group",
    "desc": "The show bgp update-group command displays how peers are grouped into update groups and can be used to verify that peers with different RCF functions with identical contents are grouped together."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show flow-spec",
    "cmd": "show flow-spec (ipv4 | ipv6) [summary][vrf VRFNAME]",
    "desc": "The show flow-spec command displays an overall status of how many flowspec rules were received and how many were installed."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "show ip as-path access-list",
    "cmd": "show ip as-path access-list [list_name]",
    "desc": "The show ip as-path access-list command displays BGP filters on the switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip bgp",
    "cmd": "show ip bgp [FILTER][VRF_INSTANCE]",
    "desc": "The show ip bgp command displays Border Gateway Protocol (BGP) IPv4 routing table entries."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Metric",
    "cmd": "Metric",
    "desc": "LocPref Weight Path 300 ? 300 ? 300 ? switch# show ip bgp community 2:2 BGP routing table information for VRF default Router identifier 220."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Network",
    "cmd": "Network",
    "desc": "192.12.24.0/24 192.47.242.0/24 Next Hop"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Automatic Route Distinguisher",
    "cmd": "BGP Automatic Route Distinguisher",
    "desc": "For BGP EVPN VXLAN fabrics, automatic route distinguisher (RD) generation simplifies the network configuration by automatically generating unique RD values based on the BGP Router ID and the VRF ID, eliminating manual RD configuration."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Peer Tagging and Route Filtering",
    "cmd": "BGP Peer Tagging and Route Filtering",
    "desc": "Peer Tagging and Route Filtering allows or discards BGP route advertisements from peers with received routes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Operational Commands",
    "cmd": "BGP Operational Commands",
    "desc": "Displaying BGP Monitoring Protocol Status"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP IPv6 Link Local Peers Discovery",
    "cmd": "BGP IPv6 Link Local Peers Discovery",
    "desc": "BGP IPv6 Link Local Peers Discovery supports a dynamic configuration model to eliminate the need for the network administrator to assign and configure IPv6 addresses for BGP peering."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Examples",
    "cmd": "BGP Examples",
    "desc": "This section shows example configurations and topologies for iBGP (BGP Example 1) and eBGP (BGP Example 2)."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Example 1",
    "cmd": "BGP Example 1",
    "desc": "Example 1 features an internal BGP (iBGP) link that connects peers in AS 100."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Example 1 Diagram",
    "cmd": "BGP Example 1 Diagram",
    "desc": "Figure 16-18: BGP Example 1 displays an iBGP connection, linking neighbors within AS 100."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Example 1 Code",
    "cmd": "BGP Example 1 Code",
    "desc": "This code configures the Example 1 BGP instance on both switches."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Example 2",
    "cmd": "BGP Example 2",
    "desc": "Example 2 creates an external BGP (eBGP) link that connects routers in AS 100 and AS 200."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Example 2 Diagram",
    "cmd": "BGP Example 2 Diagram",
    "desc": "Figure 16-19: BGP Example 2 displays an eBGP connection, linking Switch A in AS 100 to Switch B in AS 200."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Example 2 Code",
    "cmd": "BGP Example 2 Code",
    "desc": "This code configures the Example 2 BGP instance on both switches."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Commands",
    "cmd": "BGP Commands",
    "desc": "Global Configuration Commands • ip as-path access-list • ip as-path regex-mode • ip community-list • ip community-list regexp • ip extcommunity-list • ip extcommunity-list regexp • ip large-community-list regexp"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "address-family",
    "cmd": "bgp [ipv4 | ipv6]\nno bgp [ipv4 | ipv6]\ndefault bgp [ipv4 | ipv6]",
    "desc": "The address-family command places the switch in address-family configuration mode to configure the address family setting of addresses configured as BGP neighbors."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "address-family flow-spec",
    "cmd": "address-family flow-spec [ipv4 | ipv6] route-target redirect vrf lpm\naddress-family flow-spec [ipv4 | ipv6] route-target redirect vrf lpm\naddress-family flow-spec [ipv4 | ipv6] route-target redirect vrf lpm",
    "desc": "Use the address-family flow-spec command to filter or redirect DDoS traffic on edge routers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "address-family flow-spec neighbor",
    "cmd": "address-family flow-spec [ipv4 | ipv6] neighbor ip_address [activate | sendcommunity extended]\nno address-family flow-spec [ipv4 | ipv6] neighbor ip_address [activate | sendcommunity extended]\ndefault address-family flow-spec [ipv4 | ipv6] neighbor ip_address [activate |\nsend-community extended]",
    "desc": "The address-family flow-spec neighbor command in the BGP Router Configuration Mode enables Flowspec on a BGP configuration to filter or redirect DDoS traffic on edge routers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "aggregate-address",
    "cmd": "aggregate-address AGGREGATE_NET [AS_SET][SUMMARY][ATTRIBUTE_MAP][MATCH_MAP]\nno aggregate-address AGGREGATE_NET\ndefault aggregate-address AGGREGATE_NET",
    "desc": "The aggregate-address command creates an aggregate route in the Border Gateway Protocol (BGP) database."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "authentication-key",
    "cmd": "authentication-key key",
    "desc": "The authentication-key command adds security to the TCP session to the BMP monitoring station."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp advertise-inactive",
    "cmd": "bgp advertise-inactive\nno bgp advertise-inactive\ndefault bgp advertise-inactive",
    "desc": "By default, BGP will advertise only those routes that are active in the switch’s RIB."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp always-compare-med",
    "cmd": "bgp always-compare-med\nno bgp always-compare-med\ndefault bgp always-compare-med",
    "desc": "The bgp always-compare-med command configures the switch to always consider Multi-Exit Discriminator (MED) values (also known as “metric”) in best-path selection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp bestpath as-path ignore",
    "cmd": "bgp bestpath as-path ignore\nno bgp bestpath as-path ignore\ndefault bgp bestpath as-path ignore",
    "desc": "The bgp bestpath as-path ignore command configures BGP to ignore the length of the Autonomous System (AS) path when comparing routes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp bestpath as-path multipath-relax",
    "cmd": "bgp bestpath as-path multipath-relax\nno bgp bestpath as-path multipath-relax\ndefault bgp bestpath as-path multipath-relax",
    "desc": "The bgp bestpath as-path multipath-relax command allows multiple eBGP routes to a destination to be considered equal in ECMP if their AS paths are the same length despite having different autonomous systems in those paths."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp bestpath d-path",
    "cmd": "bgp bestpath d-path\nno bgp bestpath d-path\ndefault bgp bestpath d-path",
    "desc": "The bgp bestpath d-path command configures BGP to use the domain path length in bestpath route selection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp bestpath ecmp-fast",
    "cmd": "bgp bestpath ecmp-fast\nno bgp bestpath ecmp-fast\ndefault bgp bestpath ecmp-fast",
    "desc": "By default, within an ECMP group the BGP best-path selection process prefers the active path (the first path received by the switch) unless a relevant tie-breaker is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp bestpath med confed",
    "cmd": "bgp bestpath med confed [missing-as-worst]\nno bgp bestpath med confed [missing-as-worst]\ndefault bgp bestpath med confed [missing-as-worst]",
    "desc": "By default, paths originating within the same confederation as the switch and received from confederation peers do not have their Multi-Exit Discriminator (MED) values compared as part of the best-path selection"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp bestpath med missing-as-worst",
    "cmd": "bgp bestpath med missing-as-worst\nno bgp bestpath med missing-as-worst\ndefault bgp bestpath med missing-as-worst",
    "desc": "By default, BGP best-path selection considers a missing MED value to be 0, so paths with missing MED values will be preferred."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp bestpath tie-break cluster-list-length",
    "cmd": "bgp bestpath tie-break cluster-list-length\nno bgp bestpath tie-break cluster-list-length\ndefault bgp bestpath tie-break cluster-list-length",
    "desc": "The bgp bestpath tie-break cluster-list-length command causes the best-path selection process to prefer the multipath route with the shortest CLUSTER_LIST length in case of a tie in step 10."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp bestpath tie-break router-id",
    "cmd": "bgp bestpath tie-break router-id\nno bgp bestpath tie-break router-id\ndefault bgp bestpath tie-break router-id",
    "desc": "The bgp bestpath tie-break router-id command causes the best-path selection process to prefer the multipath route with the lowest ROUTER_ID in case of a tie in step 10."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp client-to-client reflection",
    "cmd": "bgp client-to-client reflection\nno bgp client-to-client reflection\ndefault bgp client-to-client reflection",
    "desc": "By default, routes received from a route reflector client and selected as best routes are propagated to all BGP peers, including other route reflector clients."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp cluster-id",
    "cmd": "bgp cluster-id ID_NUM\nno bgp cluster-id\ndefault bgp cluster-id",
    "desc": "When using route reflectors, an AS is divided into clusters."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp confederation identifier",
    "cmd": "bgp confederation identifier as_number\nno bgp confederation identifier\ndefault bgp confederation identifier",
    "desc": "The bgp confederation identifier command configures the confederation identifier."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp confederation peers",
    "cmd": "bgp confederation peers as_range\nno bgp confederation peers as_range\ndefault bgp confederation peers as_range",
    "desc": "The bgp confederation peers command configures a confederation consisting of sub-ASs."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp convergence time",
    "cmd": "bgp convergence time timeout_range\nno bgp convergence time\ndefault bgp convergence time",
    "desc": "The bgp convergence time command configures the time BGP waits before declaring all BGP sessions as converged, whether or not a EOR message has been received."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp convergence slow-peer time",
    "cmd": "bgp convergence slow-peer time timeout\nno bgp convergence slow-peer time\ndefault bgp convergence slow-peer time",
    "desc": "The bgp convergence slow-peer time command configures the idle peer time to wait for the slow peers to establish a session in a BGP convergence state."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp default",
    "cmd": "bgp default ADDRESS_FAMILY\nno bgp default ADDRESS_FAMILY\ndefault bgp default ADDRESS_FAMILY",
    "desc": "The bgp default command configures the default address family activation level of all addresses configured as BGP neighbors."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp enforce-first-as",
    "cmd": "bgp enforce-first-as\ndefault bgp enforce-first-as\nno bgp enforce-first-as",
    "desc": "The bgp enforce-first-as command causes a forced comparison of the first Autonomous System (AS) in the AS path of eBGP routes received from BGP neighbors to the configured remote external peer Autonomous System Number (ASN)."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp listen range",
    "cmd": "bgp listen range NET_ADDRESS [PEER-ID include router-id ] peer-group group_name [remote-as\nas_number | peer-filter filter_name]\nno bgp listen range NET_ADDRESS peer-group group_name\ndefault bgp listen range NET_ADDRESS peer-group group_name",
    "desc": "The bgp listen range command identifies the BGP peering request from a range of IPv4 or IPv6 address, and names the dynamic peer group to which those peers belong to."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp log-neighbor-changes",
    "cmd": "bgp log-neighbor-changes\nno bgp log-neighbor-changes\ndefault bgp log-neighbor-changes",
    "desc": "The bgp log-neighbor-changes command configures the switch to generate a log message when a BGP peer enters or exits the established state."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp monitoring",
    "cmd": "bgp monitoring",
    "desc": "The bgp monitoring command enters the Router BGP Monitoring Configuration Mode on the switch, and configures BGP Monitoring Protocol on the switch"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp redistribute-internal (BGP)",
    "cmd": "bgp redistribute internal\nno bgp redistribute internal\ndefault bgp redistribute internal",
    "desc": "The bgp redistribute-internal command enables the redistribution of iBGP routes into an Interior Gateway Protocol (IGP)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp rib bestpaths monitoring",
    "cmd": "bgp rib bestpaths monitoring [disabled]",
    "desc": "The bgp rib bestpaths monitoring globally enables or disables exporting all Local Routing Information Bases (Loc_RIB) for all BGP VRFs in a BGP VRF configuration."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp rib received routes monitoring disabled",
    "cmd": "bgp rib received routes monitoring disabled\nno bgp rib received routes monitoring disabled\ndefault bgp rib received routes monitoring disabled",
    "desc": "The bgp rib received routes monitoring disabled allows filtering of Adjacency-RIB-In (AdjRIB-In) exports for BGP Monitoring Protocol and prevents a VRF from exporting the Adj-RIB-In."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp route install-map",
    "cmd": "bgp route install-map map_name",
    "desc": "The bgp route install-map command enables BGP Selective Route Download on the switch and allows the learning and advertising of the BGP routes without installing them in hardware."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp route-reflector preserve-attributes",
    "cmd": "bgp route-reflector preserve-attributes [always]\nno bgp route-reflector preserve-attributes\ndefault bgp route-reflector preserve-attributes",
    "desc": "The bgp route-reflector preserve-attributes command configures the switch, when operating as a BGP route reflector, to preserve the BGP attributes of re-advertised routes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "clear bgp history",
    "cmd": "clear bgp [PEER | PREFIX | peer-group PEER_GROUP] history [connect-failures] [vrf VRF]",
    "desc": "To clear all messages for a peer or group of peers, use the clear bgp history command ."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "clear ip bgp",
    "cmd": "clear ip bgp [PEERS] [RESET_TYPE] [DATA_FLOW] [VRF_INSTANCE]",
    "desc": "The clear ip bgp command removes learned BGP routes from the routing table, reads all routes from designated peers, and sends routes to those peers as required."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "clear ip bgp counters",
    "cmd": "clear ip bgp [PEERS] counters [VRF_INSTANCES]",
    "desc": "The clear ip bgp counters command resets general statistics of peers."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "clear ip bgp errors",
    "cmd": "clear ip bgp [PEERS] errors [VRF_INSTANCES]",
    "desc": "The clear ip bgp errors command resets the error statistics and history of peers."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "clear ip bgp neighbor",
    "cmd": "clear ip bgp neighbor [*] [vrf vrf_name] [reason",
    "desc": "The clear ip bgp neighbor command clears BGP neighbors belonging to the IPv4 transport address family."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "clear ipv6 bgp",
    "cmd": "clear ipv6 bgp [PEERS] [RESET_TYPE] [DATA_FLOW] [VRF_INSTANCE]",
    "desc": "The clear ipv6 bgp command removes learned BGP routes from the routing table, reads all routes from designated peers, and sends routes to those peers as required."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "clear ipv6 bgp counters",
    "cmd": "clear ipv6 bgp [PEERS] counters [VRF_INSTANCES]",
    "desc": "The clear ipv6 bgp counters command resets general statistics of peers."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "clear ipv6 bgp errors",
    "cmd": "clear ipv6s bgp [PEERS] errors [VRF_INSTANCES]",
    "desc": "The clear ipv6 bgp errors command resets the error statistics and history of peers."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "clear ipv6 bgp neighbor",
    "cmd": "clear ipv6 bgp neighbor [*] [vrf vrf_name] [reason message]",
    "desc": "The clear ipv6 bgp neighbor command clears BGP neighbors belonging to the IPv6 transport address family."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "connection address",
    "cmd": "connection address ip_address vrf vrf_name",
    "desc": "The connection address command configures an IP address on a BMP monitoring station."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "connection keepalive",
    "cmd": "connection keepalive [idletime seconds | probe-interval seconds | probe-count num]",
    "desc": "The connection keepalive command checks on the health of the TCP connection with the BMP monitoring station."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "connection mode",
    "cmd": "connection mode [[active port port_number] | [reconnect-timer timer_value] | [connection mode passive]]",
    "desc": "The connection mode command configures TCP connection parameters for a BMP monitoring station."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "description",
    "cmd": "description text",
    "desc": "The description command adds a description of the BMP monitoring station to display in the show bgp station output."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "distance bgp",
    "cmd": "distance bgp external_dist [INTERNAL_LOCAL]\nno distance bgp\ndefault distance bgp",
    "desc": "The distance bgp command assigns an administrative distance to routes that the switch learns through BGP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "dynamic peer max",
    "cmd": "dynamic peer max maximum\nno dynamic peer max\ndefault dynamic peer max",
    "desc": "The dynamic peer max command limits the number of dynamic BGP peers allowed on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "export-policy received routes",
    "cmd": "export-policy received routes additional-paths [post-policy | pre-policy]",
    "desc": "The export-policy command configures the BMP monitoring station to receive additional paths advertisements from BGP peers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "graceful-restart stalepath-time",
    "cmd": "graceful-restart stalepath-time interval\nno graceful-restart stalepath-time\ndefault graceful-restart stalepath-time",
    "desc": "The graceful-restart stalepath-time command specifies the maximum time that stale routes from a restarting BGP neighbor will be retained after a BGP session is re-established with that peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "graceful-restart-helper",
    "cmd": "graceful-restart helper long-lived\nno graceful-restart helper long-lived\ndefault graceful-restart helper long-lived",
    "desc": "The graceful-restart helper command enables BGP graceful restart helper mode on the switch for all BGP neighbors."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "interface-set count",
    "cmd": "interface-set count",
    "desc": "The interface-set count command supports BGP Flowspec Interface-set Extended Community and allows BGP Flowspec rules to be selectively applied to sets of forwarding interfaces sharing a common group identifier."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "ip as-path access-list",
    "cmd": "ip as-path access-list list_name FILTER_TYPE regex ORIGIN\nno ip as-path access-list list_name\ndefault ip as-path access-list list_name",
    "desc": "The ip as-path access-list command creates an access list to filter BGP route updates."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip as-path regex-mode",
    "cmd": "ip as-path regex-mode MODE_SETTING\nno ip as-path regex-mode\ndefault ip as-path regex-mode",
    "desc": "The ip as-path regex-mode command specifies how the switch will evaluate regular expressions describing AS paths in ACLs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip community-list",
    "cmd": "no ip community-list list_name\ndefault ip community-list list_name",
    "desc": "The ip community-list command creates and configures a BGP access list based on BGP communities."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip community-list regexp",
    "cmd": "ip community-list regexp list_name {deny | permit} reg_exp\nno ip community-list regexp list_name {deny | permit} reg_exp\ndefault ip community-list regexp list_name",
    "desc": "The ip community-list regexp command creates and configures a BGP access list based on BGP communities."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip extcommunity-list",
    "cmd": "ip extcommunity-list list_name {deny | permit} COMM_1 [COMM_2...COMM_n]\nno ip extcommunity-list list_name\ndefault ip extcommunity-list list_name",
    "desc": "The ip extcommunity-list command creates an extended community list to filter VRF routes or for Link BandWidth (LBW) advertisement."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip extcommunity-list regexp",
    "cmd": "ip extcommunity-list regexp list_name {deny | permit} reg_exp\nno ip extcommunity-list regexp list_name {deny | permit} reg_exp\ndefault ip extcommunity-list regexp list_name",
    "desc": "The ip extcommunity-list regexp command creates an extended community list to filter VRF routes or for link bandwidth (LBW) advertisement."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "ip large-community-list regexp",
    "cmd": "ip large-community-list regexp list_name {deny | permit} reg_exp\nno ip large-community-list regexp list_name {deny | permit} reg_exp\ndefault ip large-community-list regexp list_name",
    "desc": "The ip large-community-list regexp command creates and configures a BGP access list based on BGP large communities."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "match as-range",
    "cmd": "no match as-range [as_number1] [as_number2] result {accept | reject} group_name\ndefault match as-range [as_number1] [as_number2] result {accept | reject} group_name",
    "desc": "The match as-range command defines the match statement for the peer-filter, based on the match statement the peer-filter accept or reject the incoming peer request."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "maximum-paths (BGP)",
    "cmd": "maximum-paths paths [ecmp ecmp_paths]\nno maximum-paths\ndefault maximum-paths",
    "desc": "The maximum-paths command controls the maximum number of parallel BGP routes that the switch supports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "monitoring bgp rib bestpaths",
    "cmd": "monitoring bgp rib bestpaths\nmonitoring bgp rib bestpaths disable",
    "desc": "The monitoring bgp rib bestpaths command configures exporting the BGP Local RIB to all monitoring stations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitoring port",
    "cmd": "monitoring port port_number",
    "desc": "The monitoring port command configures a port number for stations in passive mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitoring qos",
    "cmd": "monitoring qos dscp dscp_value",
    "desc": "The monitoring qos command configures the DSCP value for BMP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitoring received",
    "cmd": "monitoring received routes [pre-policy | post-policy]\nno monitoring received routes [pre-policy | post-policy]",
    "desc": "The monitoring received command configures the BGP router to advertise pre-policy and post-policy routes to a BMP monitoring station."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitoring station",
    "cmd": "monitoring station station_name",
    "desc": "The monitoring station command configures a name for the BMP monitoring station and places the switch in Monitoring Switch Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitoring statistics",
    "cmd": "monitoring statistics [interval interval_seconds]",
    "desc": "The monitoring statistics command generates statistics counters for BMP and disabled by default for all monitoring stations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitoring timestamp",
    "cmd": "monitoring timestamp [send-time | none]",
    "desc": "The monitoring timestamp command sets the timestamp in BMP Route Monitoring messages to zero or the time of message construction."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor",
    "cmd": "neighbor [ipv4 [send-community [large]]| ipv6 | NAME | default | fe80::A:B:C:D% interface | interface]",
    "desc": "Use the neighbor command to enable large communities on a ‘per-neighbor’ or ‘per-peer group’ basis."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor activate",
    "cmd": "neighbor neighbor_ID activate\nno neighbor neighbor_ID activate\ndefault neighbor neighbor_ID activate",
    "desc": "The neighbor activate command defines the configuration mode address family activation state of a specified address that is configured as a BGP neighbor."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor allowas-in",
    "cmd": "neighbor neighbor_ID allowas-in [asn_quantity]\nno neighbor neighbor_ID allowas-in\ndefault neighbor neighbor_ID allowas-in",
    "desc": "By default, BGP drops received routes if their Autonomous System (AS) paths contain the AS Number (ASN) of the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor as-path remote-as replace out",
    "cmd": "neighbor neighbor_ID as-path remote-as replace out\nno neighbor neighbor_ID as-path remote-as replace out\ndefault neighbor neighbor_ID as-path remote-as replace out",
    "desc": "By default, BGP drops received routes if their Autonomous System (AS) paths contain the AS Number (ASN) of the switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "in BGP routes advertised to that neighbor.",
    "cmd": "in BGP routes advertised to that neighbor.",
    "desc": "switch(config)# router bgp 1 switch(config-router-bgp)# neighbor 192."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor auto-local-addr",
    "cmd": "neighbor neighbor_ID auto-local-addr\nno neighbor neighbor_ID auto-local-addr\ndefault neighbor neighbor_ID auto-local-addr",
    "desc": "The neighbor auto-local-addr command configures the switch to automatically determine the local address to be used for the non-transport address family in NLRIs sent to the specified neighbor or peer group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "neighbor default-originate",
    "cmd": "neighbor neighbor_ID default-originate [MAP]\nno neighbor neighbor_ID default-originate\ndefault neighbor neighbor_ID default-originate",
    "desc": "The neighbor default-originate command advertises a default route to a BGP neighbor or peer group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor description",
    "cmd": "neighbor neighbor_ID description description_string\nno neighbor neighbor_ID description\ndefault neighbor neighbor_ID description",
    "desc": "The neighbor description command associates descriptive text with the specified peer or peer group."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "neighbor ebgp-multihop",
    "cmd": "neighbor neighbor_ID ebgp-multihop [hop_number]\nno neighbor neighbor_ID ebgp-multihop\ndefault neighbor neighbor_ID ebgp-multihop",
    "desc": "The neighbor ebgp-multihop command programs the switch to accept and attempt BGP connections to the external peers residing on networks not directly connected to the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor enforce-first-as",
    "cmd": "neighbor neighbor_ID enforce-first-as\nno neighbor neighbor_ID enforce-first-as\ndefault neighbor neighbor_ID enforce-first-as",
    "desc": "The neighbor enforce-first-as command causes a forced comparison of the first Autonomous System (AS) in the AS path of eBGP routes received from a specified BGP peer or peer group to the configured remote external peer Autonomous System Number (ASN)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor export-localpref",
    "cmd": "neighbor neighbor_ID export-localpref preference\nno neighbor neighbor_ID export-localpref\ndefault neighbor neighbor_ID export-localpref",
    "desc": "The neighbor export-localpref command determines the LOCAL_PREF value that is sent in BGP UPDATE packets to the specified peer or peer group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor graceful-restart",
    "cmd": "neighbor neighbor_ID graceful-restart\nno neighbor neighbor_ID graceful-restart\ndefault neighbor neighbor_ID graceful-restart",
    "desc": "The neighbor graceful-restart command enables the BGP graceful restart mode for a specified BGP neighbor or peer group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor graceful-restart-helper",
    "cmd": "neighbor neighbor_ID graceful-restart helper long-lived\nno neighbor neighbor_ID graceful-restart helper long-lived\ndefault neighbor neighbor_ID graceful-restart helper long-lived",
    "desc": "The neighbor graceful-restart helper command enables BGP graceful restart helper mode for the specified BGP neighbor or peer group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor import-localpref",
    "cmd": "neighbor neighbor_ID import-localpref preference\nno neighbor neighbor_ID import-localpref\ndefault neighbor neighbor_ID import-localpref",
    "desc": "The neighbor import-localpref command determines the local preference assigned to routes received from the specified external peer or peer group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor local-as",
    "cmd": "neighbor neighbor_ID [local-as as_id] ]no-prepend | replace-as]\nno neighbor neighbor_ID local-as\ndefault neighbor neighbor_ID local-as",
    "desc": "The neighbor local-as command changes the local AS value sent to the specified peer in OPEN messages, allowing the switch to appear as a member of a different AS to the selected peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor local-v4-addr",
    "cmd": "neighbor neighbor_ID local-v4-addr ipv4_local\nno neighbor neighbor_ID local-v4-addr\ndefault neighbor neighbor_ID local-v4-addr",
    "desc": "The neighbor local-v4-addr command specifies the next-hop value that the switch sends as the IPv4 NLRI value to neighbors with whom IPv6 transport peering is established."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor local-v6-addr",
    "cmd": "neighbor neighbor_ID local-v6-addr ipv6_local\nno neighbor neighbor_ID local-v6-addr\ndefault neighbor neighbor_ID local-v6-addr",
    "desc": "The neighbor local-v6-addr command specifies the next-hop value that the switch sends as the IPv6 NLRI value to neighbors with which IPv4 transport peering is established."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor maximum-routes",
    "cmd": "neighbor neighbor_ID maximum-routes quantity [action]\nno neighbor neighbor_ID maximum-routes\ndefault neighbor neighbor_ID maximum-routes",
    "desc": "The neighbor maximum-routes command determines the number of BGP routes the switch accepts from a specified neighbor and defines an action after exceeding the limit."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor next-hop-peer",
    "cmd": "neighbor neighbor_ID next-hop-peer\nno neighbor neighbor_ID next-hop-peer\ndefault neighbor neighbor_ID next-hop-peer",
    "desc": "The neighbor next-hop-peer command configures the switch to list the peer address as the next hop in routes that it receives from the specified peer BGP-speaking neighbor or members of the specified peer"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor next-hop-self",
    "cmd": "neighbor neighbor_ID next-hop-self\nno neighbor neighbor_ID next-hop-self\ndefault neighbor neighbor_ID next-hop-self",
    "desc": "The neighbor next-hop-self command configures the switch to list its address as the next hop in routes that it advertises to the specified BGP-speaking neighbor or neighbors in the specified peer group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor next-hop resolution v4-mapped-v6 translation",
    "cmd": "neighbor {neighbor_ID} next-hop resolution v4-mapped-v6 translation\nno neighbor {neighbor_ID} next-hop resolution v4-mapped-v6 translation\ndefault neighbor {neighbor_ID} next-hop resolution v4-mapped-v6 translation",
    "desc": "The neighbor next-hop resolution v4-mapped-v6 translation command configures the switch to enable translation of IPv4-mapped IPv6 addresses to IPv4 addresses."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor out-delay",
    "cmd": "neighbor neighbor_ID out-delay delay_time\nno neighbor neighbor_ID out-delay delay_time\ndefault neighbor neighbor_ID out-delay delay_time",
    "desc": "The neighbor out-delay command sets the period of time that a route update for the specified neighbor must be in the routing table before the switch exports it to BGP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor passive",
    "cmd": "neighbor neighbor_ID passive\nno neighbor neighbor_ID passive\ndefault neighbor neighbor_ID passive",
    "desc": "The neighbor passive command sets the TCP connection for the specified BGP neighbor or peer group to passive mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor password",
    "cmd": "neighbor neighbor_ID password [ENCRYPT_LEVEL] key_text\nno neighbor neighbor_ID password\ndefault neighbor neighbor_ID password",
    "desc": "The neighbor password command enables authentication on a TCP connection with a BGP peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor peer group (create)",
    "cmd": "neighbor group_name peer group\nno neighbor group_name peer group\ndefault neighbor group_name peer group",
    "desc": "Peer groups allow the user to apply settings to a group of BGP neighbors simultaneously."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor peer group (neighbor assignment)",
    "cmd": "neighbor NEIGHBOR_ADDR peer group group_name\nno neighbor NEIGHBOR_ADDR peer group\ndefault neighbor NEIGHBOR_ADDR peer group",
    "desc": "Peer groups allow the user to apply settings to a group of BGP neighbors simultaneously."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor peer-tag",
    "cmd": "neighbor peer_group_name peer-tag [in tag_name] [out [discard | allow] tag_name]\naddress-family [ipv4 | ipv6] neighbor peer_group_name peer-tag [in tag_name]\nno neighbor peer_group_name peer-tag\ndefault no neighbor peer_group_name peer-tag>",
    "desc": "The neighbor peer-tag command in the BGP Configuration or BGP Address-Family Configuration Mode configures peer tagging and route filtering for BGP route advertisements by received routes from peers."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "neighbor received attribute discard",
    "cmd": "neighbor [default | ipv4 | ipv6] received attribute discard bgp_attribute_type\nIPv6 address to apply the configuration to a specific BGP neighbor.",
    "desc": "The neighbor received attribute discard command allows the configuration of BGP Attribute Ignore Received Lists to discard update messages with a BGP attribute."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor remote-as",
    "cmd": "neighbor neighbor_ID remote-as as_id\nno neighbor neighbor_ID remote-as\ndefault neighbor neighbor_ID remote-as",
    "desc": "The neighbor remote-as command configures the expected AS Number for a neighbor (peer)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor remove-private-as",
    "cmd": "neighbor neighbor_ID remove-private-as [REMOVAL]\nno neighbor neighbor_ID remove-private-as\ndefault neighbor neighbor_ID remove-private-as",
    "desc": "The neighbor remove-private-as command removes private autonomous system numbers from outbound routing updates for external BGP (eBGP) neighbors."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor rib-in delay",
    "cmd": "neighbor peer rib-in delay seconds event peer-init",
    "desc": "The neighbor rib-in delay command configures an inbound delay for installing routes from a peer on a BGP network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor rib-in pre-policy retain",
    "cmd": "neighbor neighbor_ID rib-in pre-policy retain [all]\nno neighbor neighbor_ID rib-in pre-policy retain\ndefault neighbor neighbor_ID rib-in pre-policy retain",
    "desc": "By default, inbound BGP routes that are filtered out by the inbound policy are still stored on the switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "neighbor route-map (BGP)",
    "cmd": "neighbor neighbor_ID route-map map_name [in | out]",
    "desc": "The neighbor route-map command applies a route map to inbound or outbound BGP routes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor route-reflector-client",
    "cmd": "neighbor neighbor_ID route-reflector-client\nno neighbor neighbor_ID route-reflector-client\ndefault neighbor neighbor_ID route-reflector-client",
    "desc": "Participating BGP routers within an AS communicate eBGP-learned routes to all of their peers, but to prevent routing loops they must not re-advertise iBGP-learned routes within the AS."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor route-to-peer",
    "cmd": "neighbor neighbor_ID route-to-peer\nno neighbor neighbor_ID route-to-peer\ndefault neighbor neighbor_ID route-to-peer",
    "desc": "The neighbor route-to-peer command allows BGP to establish a connection to reach the specified peer using kernel routing table information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor send-community",
    "cmd": "neighbor neighbor_ID send-community [extended] [large][standard]",
    "desc": "The neighbor send-community command configures the switch to include community path attributes for routes in the UPDATE messages advertised to the specified BGP neighbor."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor send-community add / remove",
    "cmd": "neighbor neighbor_ID send-community {add | remove}{extended | large | standard}",
    "desc": "The neighbor send-community add / remove command modifies the types of community path attributes included for routes in the UPDATE messages advertised to the specified BGP neighbor without having to issue the neighbor send-community command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor send-community link-bandwidth",
    "cmd": "neighbor neighbor_ID send-community link-bandwidth {aggregate [reference_speed] | divide\nno neighbor neighbor_ID send-community\ndefault neighbor neighbor_ID send-community",
    "desc": "The neighbor send-community link-bandwidth command is used to locally regenerate the link-bandwidth value to be advertised to a specific BGP neighbor or peer group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor shutdown",
    "cmd": "neighbor neighbor_ID shutdown reason REASON",
    "desc": "The neighbor shutdown command disables the specified neighbor."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor timers",
    "cmd": "neighbor neighbor_ID timers keep_alive hold_time\nno neighbor neighbor_ID timers\ndefault neighbor neighbor_ID timers",
    "desc": "The neighbor timers command configures the BGP keepalive and hold times for a specified peer connection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor ttl maximum-hops",
    "cmd": "neighbor neighbor_ID ttl maximum-hops hop_number\nno sneighbor neighbor_ID ttl maximum-hops\ndefault neighbor neighbor_ID ttl maximum-hops",
    "desc": "The neighbor ttl maximum-hops command configures the Generalized TTL Security Mechanism (GTSM) for the specified neighbor(s)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor update-source",
    "cmd": "neighbor neighbor_ID update-source INTERFACE\nno neighbor neighbor_ID update-source\ndefault neighbor neighbor_ID update-source",
    "desc": "The neighbor update-source command specifies the interface that BGP sessions use for TCP connections."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "neighbor weight",
    "cmd": "neighbor neighbor_ID weight weight_value\nno neighbor neighbor_ID weight\ndefault neighbor neighbor_ID weight",
    "desc": "The neighbor weight command assigns a weight attribute value to paths from the specified neighbor."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "next-hop resolution route",
    "cmd": "next-hop resolution rout igp-nexthop-cost protocol bgp",
    "desc": "The next-hop resolution route command configures BGP with next hop resolution with IGP distance on the switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "network (BGP)",
    "cmd": "network NET_ADDRESS [ROUTE_MAP]\nno network NET_ADDRESS\ndefault network NET_ADDRESS",
    "desc": "The network command specifies a network for advertisement through UPDATE packets to BGP peers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "no neighbor",
    "cmd": "no neighbor neighbor_ID\ndefault neighbor neighbor_ID",
    "desc": "The no neighbor command removes all neighbor configuration commands for the specified neighbor."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "peer-filter",
    "cmd": "peer-filter filter_name\nno peer-filter filter_name\ndefault peer-filter filter_name",
    "desc": "The peer-filter command creates a peer filter group and places the switch in peer-filter configuration mode for that group."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "rd (Router-BGP VRF and VNI Configuration Modes)",
    "cmd": "rd admin_ID:local_assignment\nno rd\ndefault rd",
    "desc": "The rd command adds a Route Distinguisher (RD) to VRF and VNI configuration modes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "rib fib fec ecmp ordered",
    "cmd": "rib fib fec ecmp ordered\nno rib fib fec ecmp ordered",
    "desc": "The rib fib fec ecmp ordered command is configured to enforce ordering of next hops as determined by the protocol agents in the FEC programmed for the route."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "route-target auto l3-vrf",
    "cmd": "route-target [import | export] auto l3-vrf 2b_ASN disabled",
    "desc": "The route-target auto l3-vrf command in Router BGP Address Family Configuration Mode autogenerates import and export route targets for Layer 3 Virtual Routing and Forwarding (VRF) instances."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "router bgp",
    "cmd": "router bgp as_id\nno router bgp\ndefault router bgp",
    "desc": "The router bgp command places the switch in router-BGP configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "router-id (BGP)",
    "cmd": "router-id id_num\nno router-id [id_num]\ndefault router-id [id_num]",
    "desc": "The router-id command sets the local router BGP router ID."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "set large-community",
    "cmd": "set large-community [large-community-list LIST1 [[LIST2] [additive | delete]]]\nno set large-community [large-community-list LIST1 [[LIST2] [additive | delete]]]\ndefault set large-community [large-community-list LIST1 [[LIST2] [additive | delete]]]",
    "desc": "Large communities are an optional transitive attribute of variable length."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show bgp labeled-unicast tunnel",
    "cmd": "show bgp labeled-unicast tunnel tunnel_index",
    "desc": "The show bgp labeled-unicast tunnel command displays the contents of the BGP LabeledUnicast (LU) tunnel table."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show bgp convergence",
    "cmd": "show bgp convergence [VRF_INSTANCE]",
    "desc": "The show bgp convergence command displays information about the Border Gateway Protocol (BGP) convergence state and other statistics about the BGP instance in the specified VRF or in all VRFs."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show bgp flow-spec",
    "cmd": "show bgp flow-spec [ipv4 | ipv6] [summary | detail] [vrf VRFNAME]",
    "desc": "The show bgp flow-spec ipv4 displays a brief description of each flowspec rule, including the matching rule and actions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "labels [ 101 102 103 104 ] from 1.1.1.2 (1.1.1.2)",
    "cmd": "labels [ 101 102 103 104 ] from 1.1.1.2 (1.1.1.2)",
    "desc": "Origin IGP, metric 0, localpref 100, weight 0, valid, external, best Rx path id: 0x0"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 1.0.0.2 (0.0.1.1)",
    "cmd": "from 1.0.0.2 (0.0.1.1)",
    "desc": "Origin INCOMPLETE, metric 0, localpref 100, weight 0, valid, external, not installed (labeled-route present) • This command displays the BGP routing-table entry for the 10."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 10.1.0.100 (10.0.0.100)",
    "cmd": "from 10.1.0.100 (10.0.0.100)",
    "desc": "Origin IGP, metric 0, localpref 100, IGP metric 1, weight 0, received 01:57:33 ago, valid, external, best Community: 655:23590 64496:1000 Rx SAFI: Unicast • This command displays the label stack associated with the route for a default VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "from 10.2.0.101 (12.0.0.101)",
    "cmd": "from 10.2.0.101 (12.0.0.101)",
    "desc": "Origin IGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:00:58 ago, valid, external, best Rx SAFI: Unicast 64496"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "peer-group INTERNAL:",
    "cmd": "peer-group INTERNAL:",
    "desc": "1.0.0.2"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip bgp community",
    "cmd": "show ip bgp community COMM_1 [COMM_2... COMM_n][MATCH_TYPE][DATA_OPTION]",
    "desc": "The show ip bgp community command displays Border Gateway Protocol (BGP) routing table entries, filtered by community."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip bgp neighbors (route type)",
    "cmd": "show ip bgp neighbors neighbor_addr HOPDIRECT [FILTER] [VRF_INSTANCE]\nshow ip bgp neighbors neighbor_addr [ROUTE_TYPE] HOPDIRECT [detail]",
    "desc": "The show ip bgp neighbors (route type) command displays information for next-hop routes to a specified IPv4 neighbor."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip bgp neighbors (route-type) community",
    "cmd": "show ip bgp neighbors addr RTE community CM_1 [CM_2...CM_n][MATCH][INFO][VRF_INST]",
    "desc": "The show ip bgp neighbors (route type) community command displays information for nexthop routes to a specified neighbor."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip bgp neighbors regexp",
    "cmd": "show ip bgp neighbors addr RTE regexp as_paths [VRF_INST]",
    "desc": "The show ip bgp neighbors regexp command displays information for next-hop routes to a specified IPv4 neighbor that match the AS path attributes specified in the given regular expression."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip bgp summary",
    "cmd": "show ip bgp summary [VRF_INSTANCE]",
    "desc": "The show ip bgp summary command displays the summary of all IPv4 and IPv6 BGP neighbors based on exchanged Address Family Identifiers (AFI) and Subsequent Address Family Identifiers (SAFI) negotiations where AFI is “IP” and SAFI is “unicast” information."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip bgp neighbors",
    "cmd": "show ip bgp neighbors [NEIGHBOR_ADDR] [VRF_INSTANCE]",
    "desc": "The show ip bgp neighbors command displays Border Gateway Protocol (BGP) and TCP-session data for a specified IPv4 BGP neighbor, or for all IPv4 BGP neighbors if an address is not specified."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip bgp paths",
    "cmd": "show ip bgp paths [VRF_INSTANCE]",
    "desc": "The show ip bgp paths command displays all BGP AS paths in the database."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip bgp peer-group",
    "cmd": "show ip bgp peer-group [GROUP][VRF_INSTANCE]",
    "desc": "The show ip bgp peer-group command displays the BGP version, address family, and group members for all BGP peer groups defined on the switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip bgp regexp",
    "cmd": "show ip bgp regexp as_paths [VRF_INSTANCE]",
    "desc": "The show ip bgp regexp command displays Border Gateway Protocol (BGP) IPv4 routing-table entries that match the AS path attributes specified in the given regular expression."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip community-list",
    "cmd": "show ip community-list [COMMUNITY_LIST]",
    "desc": "The show ip community-list command displays the BGP community lists configured on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip extcommunity-list",
    "cmd": "show ip extcommunity-list [COMMUNITY_LIST]",
    "desc": "The show ip extcommunity-list command displays the BGP extended community lists configured on the switch."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ipv6 bgp",
    "cmd": "show ipv6 bgp [FILTER][VRF_INSTANCE]",
    "desc": "The show ipv6 bgp command displays IPv6 Border Gateway Protocol (BGP) routing-table entries."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ipv6 bgp match community",
    "cmd": "show ipv6 bgp match community [COMM_1 ... COMM_n][MATCH_TYPE][INFO][VRF_INSTANCE]",
    "desc": "The show ipv6 bgp match community command displays IPv6 Border Gateway Protocol (BGP) routing-table entries, filtered by community."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ipv6 bgp peers",
    "cmd": "show ipv6 bgp peers [NEIGHBOR_ADDR] [VRF_INSTANCE]",
    "desc": "The show ipv6 bgp peers command displays IPv6 Border Gateway Protocol (BGP) and TCP session data for a specified neighbor."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ipv6 bgp peers (route type)",
    "cmd": "show ipv6 bgp peers neighbor_addr HOPDIRECT [FILTER] [VRF_INSTANCE]\nshow ipv6 bgp peers neighbor_addr [ROUTE_TYPE] HOPDIRECT [detail]",
    "desc": "The show ipv6 bgp peers (route type) command displays information about the routes either advertised to or received from a specified IPv6 BGP neighbor."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ipv6 bgp peers (route type) community",
    "cmd": "show ipv6 bgp peers addr RTE community CM_1 [CM_2...CM_n] [MATCH] [INFO] [VRF_INST]",
    "desc": "The show ipv6 bgp peers (route type) community command displays information about the routes either advertised to or received from a specified IPv6 BGP neighbor."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ipv6 bgp peers regexp",
    "cmd": "show ipv6 bgp peers addr ROUTE regexp as_paths [VRF_INST]",
    "desc": "The show ipv6 bgp peers regexp command displays information about routes (advertised or received) from a specified IPv6 neighbor that match the AS-path attributes specified in the given regular expression."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ipv6 bgp regexp",
    "cmd": "show ipv6 bgp regexp as_paths [VRF_INSTANCE]",
    "desc": "The show ipv6 bgp regexp command displays Border Gateway Protocol (BGP) IPv6 routing-table entries that match the AS-path attributes specified in the given regular expression."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ipv6 bgp summary",
    "cmd": "show ipv6 bgp summary [VRF_INSTANCE]",
    "desc": "The show ipv6 bgp summary command displays the summary of all IPv4 and IPv6 BGP neighbors based on Address Family Identifier (AFI) and Subsequent Address Family Identifier (SAFI) negotiations where AFI is “IPv6” and SAFI is “Unicast” information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show peer-filter",
    "cmd": "show peer-filter filter_name",
    "desc": "The show peer-filter command displays the definition of a peer filter."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show run|section bgp",
    "cmd": "show run | section bgp [name]",
    "desc": "When using the show run command, it displays the entire running configuration."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show tunnel rib brief",
    "cmd": "show bgp tunnel rib brief",
    "desc": "The show tunnel rib brief command displays the preferred tunnels for various IP endpoints, optionally filtered by endpoint."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "timers bgp",
    "cmd": "timers bgp keep_alive hold_time\nno timers bgp\ndefault timers bgp",
    "desc": "The timers bgp command configures the BGP keepalive and hold times."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "update-source",
    "cmd": "update-source interface",
    "desc": "The update-source command specifies a local source interface for the BGP monitoring session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "update wait-for-convergence",
    "cmd": "update wait-for-convergence\nno update wait-for-convergence\ndefault update wait-for-convergence",
    "desc": "The update wait-for-convergence command disables FIB updates and route advertisement when the BGP instance is initiated until the BGP convergence state is reached."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "update wait-install",
    "cmd": "update wait-install",
    "desc": "The update wait-install command causes BGP to defer the advertisement of routes until the routes have been programmed in hardware."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Default Profiles",
    "cmd": "Default Profiles",
    "desc": "Default profiles are the built-in policies that are applied to groups interface/BGP and unit."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP Maintenance Route Map",
    "cmd": "BGP Maintenance Route Map",
    "desc": "Route-maps are used within a BGP maintenance profile to tag the inbound and outbound routes to direct traffic away from the unit."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bgp",
    "cmd": "bgp [[ipv4 | ipv6] ip_addr] [vrf vrf_name] quiesce\nbgp ipv4_addr [vrf vrf_name]\nbgp ipv4_addr [vrf vrf_name]\nno bgp [ipv4_addr | ipv6_addr | peer_group_name][vrf vrf_name]\ndefault bgp [ipv4_addr | ipv6_addr | peer_group_name][vrf vrf_name]",
    "desc": "The bgp command places the switch in Maintenance Dynamic BGP Configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "group bgp",
    "cmd": "group bgp group_name\nno group bgp group_name\ndefault group bgp group_name",
    "desc": "The group bgp command places the switch in group-BGP configuration mode for configuring the members of a BGP group in a particular VRF and associating a BGP maintenance profile for these members."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "group interface",
    "cmd": "group interface group_name\nno group interface group_name\ndefault group interface group_name",
    "desc": "The group interface command places the switch in group-intf configuration mode for configuring the members of interface group and associating a BGP/interface maintenance profile for these members."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "initiator route-map <route-map-name> inout",
    "cmd": "initiator route-map route-map-name inout\nno initiator route-map\ndefault initiator route-map",
    "desc": "The initiator route-map <route-map-name> inout command is a maintenance BGP profile configuration option for assigning the initiator route-map, which will be applied to inout (inbound and outbound)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "interface",
    "cmd": "interface interface-name\nno interface interface-name\ndefault interface interface-name",
    "desc": "The interface command adds interfaces to interface group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "maintenance",
    "cmd": "maintenance\nno maintenance\ndefault maintenance",
    "desc": "The maintenance command allows you to enter maintenance configuration mode and specify maintenance configuration options."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "maintenance profile bgp",
    "cmd": "maintenance profile bgp profile-name\nno maintenance profile bgp profile-name\ndefault maintenance profile bgp profile-name",
    "desc": "The maintenance profile bgp <profile-name> command associates a BGP maintenance profile to an interface/BGP group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "maintenance profile interface",
    "cmd": "maintenance profile interface profile-name\nno maintenance profile interface profile-name\ndefault maintenance profile interface profile-name",
    "desc": "The maintenance profile interface <profile-name> command associates interface profile to interface group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "neighbor",
    "cmd": "neighbor [ipv4_addr | ipv6_addr | peer group name]\nno neighbor [ipv4_addr | ipv6_addr | peer group name]\ndefault neighbor [ipv4_addr | ipv6_addr | peer group name]",
    "desc": "The neighbor command adds BGP peer(s) to a BGP group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "on-boot duration",
    "cmd": "on-boot duration duration\nno on-boot\ndefault on-boot",
    "desc": "The on-boot duration command is a maintenance unit profile configuration option for specifying the duration after which the associated unit will be brought out of maintenance after reboot."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "profile bgp",
    "cmd": "profile bgp profile-name\nno profile bgp profile-name\ndefault profile bgp profile-name",
    "desc": "The profile bgp command places the switch in maintenance profile BGP configuration mode for configuring initiator route-map."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "profile bgp <profile_name> default",
    "cmd": "profile bgp profile_name default\nno profile bgp profile_name default\ndefault profile bgp profile_name default",
    "desc": "The profile bgp <profile_name> default command configures a user-configured BGP profile as default BGP profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "profile interface",
    "cmd": "profile interface profile-name\nno profile interface profile-name\ndefault profile interface profile-name",
    "desc": "The profile interface command places the switch in maintenance profile interface configuration mode for configuring rate-monitoring threshold, load-interval, and shutdown max-delay."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "profile interface <profile_name> default",
    "cmd": "profile interface profile_name default\nno profile interface profile_name default\ndefault profile interface profile_name default",
    "desc": "The profile interface <profile_name> default command configures a user-configured interface profile as default interface profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "profile unit",
    "cmd": "profile unit profile-name\nno profile unit profile-name\ndefault profile unit profile-name",
    "desc": "The profile unit command places the switch in maintenance profile unit configuration mode for configuring on-boot duration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "profile unit <profile_name> default",
    "cmd": "profile unit profile_name default\nno profile unit profile_name default\ndefault profile unit profile_name default",
    "desc": "The profile unit <profile_name> default command configures a user-configured unit profile as default unit profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "quiesce",
    "cmd": "quiesce\nno quiesce\ndefault quiesce",
    "desc": "The quiesce command places a unit or dynamic interface/BGP unit into maintenance mode, gracefully transitioning traffic away from it."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "rate-monitoring load-interval",
    "cmd": "rate-monitoring load-interval load_interval\nno rate-monitoring load-interval load_interval\ndefault rate-monitoring load-interval load_interval",
    "desc": "The rate-monitoring load-interval command is a maintenance interface profile configuration option for configuring the interfaces rate monitoring load interval with a load interval value between 5 and 600"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "rate-monitoring threshold",
    "cmd": "rate-monitoring threshold threshold_in_kbps\nno rate-monitoring threshold threshold_in_kbps\ndefault rate-monitoring threshold threshold_in_kbps",
    "desc": "The rate-monitoring threshold command is a maintenance interface profile configuration option for configuring the interfaces rate monitoring threshold with a threshold value between 1 and 4294967295 kilobytes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interface",
    "cmd": "show interface intf_name",
    "desc": "The show interface command displays detailed information about the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interface <intf_name> status",
    "cmd": "show interface [intf_name] status",
    "desc": "The show interface <intf_name> status command displays an m flag if the interface is undergoing maintenance operation."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip | ipv6 bgp",
    "cmd": "show ip bgp neighbors peer_addr [vrf vrf_name]\nshow ipv6 bgp peers peer_addr [vrf vrf_name]",
    "desc": "The show ip | ipv6 bgp command displays maintenance related information when relevant."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip | ipv6 bgp summary [ vrf <vrf_name>]",
    "cmd": "show ip bgp summary [vrf vrf_name]\nshow ipv6 bgp summary [vrf vrf_name]",
    "desc": "The show ip | ipv6 bgp summary [ vrf <vrf_name>] command displays the m flag if the BGP IPv4 or IPv6 peer is undergoing maintenance operation."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show maintenance",
    "cmd": "show maintenance",
    "desc": "The show maintenance command provides brief information about all units/dynamic interface unit/ dynamic bgp unit and status."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show maintenance bgp",
    "cmd": "show maintenance bgp ipv4_addr [vrf vrf_name] | ipv6_addr [vrf vrf_name] | peer_group [vrf vrf_name] |\nip all [vrf vrf_name | vrf all] | ipv6 all [vrf vrf_name | vrf all]",
    "desc": "The show maintenance bgp command displays detailed maintenance information about BGP peers."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show maintenance bgp receiver route-map",
    "cmd": "show maintenance bgp receiver route-map",
    "desc": "The show maintenance bgp receiver route-map command displays receiver route-map which is applied during maintenance operation."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show maintenance interface status quiesced",
    "cmd": "show maintenance interface status quiesced",
    "desc": "This example of the show maintenance interface status quisced command displays maintenance mode interface status details for quiesced interfaces."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show maintenance debug",
    "cmd": "show maintenance debug bgp [peer_name] | interface [intf_name] | units [unit_name]",
    "desc": "The show maintenance debug command displays the history of various maintenance operations on a unit/interface/BGP peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "maintEnter stages started",
    "cmd": "maintEnter stages started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "stage begin started",
    "cmd": "stage begin started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "event begin:EventMgr started",
    "cmd": "event begin:EventMgr started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "event begin:EventMgr completed",
    "cmd": "event begin:EventMgr completed",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "stage begin is complete",
    "cmd": "stage begin is complete",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "stage before_bgp started",
    "cmd": "stage before_bgp started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "event before_bgp:EventMgr started",
    "cmd": "event before_bgp:EventMgr started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "event before_bgp:EventMgr completed",
    "cmd": "event before_bgp:EventMgr completed",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "stage before_bgp is complete",
    "cmd": "stage before_bgp is complete",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "stage bgp started",
    "cmd": "stage bgp started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "event bgp:Rib started",
    "cmd": "event bgp:Rib started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "event bgp:Rib completed",
    "cmd": "event bgp:Rib completed",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "stage bgp is complete",
    "cmd": "stage bgp is complete",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "stage after_bgp started",
    "cmd": "stage after_bgp started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "event after_bgp:EventMgr started",
    "cmd": "event after_bgp:EventMgr started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "event after_bgp:EventMgr completed",
    "cmd": "event after_bgp:EventMgr completed",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "stage after_bgp is complete",
    "cmd": "stage after_bgp is complete",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "stage before_ratemon started",
    "cmd": "stage before_ratemon started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "event before_ratemon:EventMgr started",
    "cmd": "event before_ratemon:EventMgr started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "event before_ratemon:EventMgr completed",
    "cmd": "event before_ratemon:EventMgr completed",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "stage before_ratemon is complete",
    "cmd": "stage before_ratemon is complete",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "stage ratemon started",
    "cmd": "stage ratemon started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "event ratemon:MaintenanceMode started",
    "cmd": "event ratemon:MaintenanceMode started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "event ratemon:MaintenanceMode completed",
    "cmd": "event ratemon:MaintenanceMode completed",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "stage ratemon is complete",
    "cmd": "stage ratemon is complete",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "stage after_ratemon started",
    "cmd": "stage after_ratemon started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "event after_ratemon:EventMgr started",
    "cmd": "event after_ratemon:EventMgr started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "event after_ratemon:EventMgr completed",
    "cmd": "event after_ratemon:EventMgr completed",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "stage after_ratemon is complete",
    "cmd": "stage after_ratemon is complete",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "stage end started",
    "cmd": "stage end started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "event end:EventMgr started",
    "cmd": "event end:EventMgr started",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "event end:EventMgr completed",
    "cmd": "event end:EventMgr completed",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "stage end is complete",
    "cmd": "stage end is complete",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "maintEnter stages complete",
    "cmd": "maintEnter stages complete",
    "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show maintenance groups",
    "cmd": "show maintenance groups interface | bgp group_name",
    "desc": "The show maintenance groups command displays all the interface/BGP groups along with their members and associated profiles."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show maintenance interface",
    "cmd": "show maintenance interface [intf_name [detail] | detail]",
    "desc": "The show maintenance interface command displays detailed information about interfaces and their maintenance status with traffic rates."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show maintenance interface status",
    "cmd": "show maintenance interface status [active | entering | exiting | quiesced]",
    "desc": "The show maintenance interface status command displays maintenance status and rates for interfaces."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show maintenance profiles",
    "cmd": "show maintenance profiles interface | bgp | unit profile_name",
    "desc": "The show maintenance profiles command displays all the interface/BGP/unit profiles configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show maintenance stages",
    "cmd": "show maintenance stages [enter | exit]",
    "desc": "The show maintenance stages command displays stages of maintenance operation while entering/ exiting maintenance."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show maintenance summary",
    "cmd": "show maintenance summary",
    "desc": "The show maintenance summary command displays summarized information about the maintenance mode operations such as number of units configured, number of units Entering/Exiting maintenance etc."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show maintenance units",
    "cmd": "show maintenance units [unit_name]",
    "desc": "The show maintenance units command displays detailed information about the particular unit."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "shutdown max-delay",
    "cmd": "shutdown max-delay delay\nno shutdown max-delay delay\ndefault shutdown max-delay delay",
    "desc": "The shutdown max-delay command is a maintenance interface profile configuration option for configuring the maximum duration after which the interface is shutdown with a value between 1 and 4294967295 seconds."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "trigger on-maintenance",
    "cmd": "trigger on-maintenance [enter | exit][unit unit_name | bgp [ipv4_addr | ipv6_addr | peer_group][vrf\nvrf_name] | [interface intf_name] [begin | end | all] |[before | after][stage stage_name]",
    "desc": "The trigger on-maintenance command is an event handler configuration for triggering actions during the maintenance operation of a unit, interface and BGP peer at specified stages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "unit",
    "cmd": "unit linecard [l_range | 0 l_range | unit_name]\nno unit linecard [l_range | 0 l_range | unit_name]\ndefault unit linecard [l_range | 0 l_range | unit_name]",
    "desc": "The unit <unit_name> command places the switch in maintenance unit configuration mode for configuring BGP/interface groups in the unit."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "vrf",
    "cmd": "vrf vrf_name\nno vrf vrf_name\ndefault vrf vrf_name",
    "desc": "The vrf command specifies the VRF for BGP group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "BFD Modes",
    "cmd": "BFD Modes",
    "desc": "BFD functions in asynchronous or demand mode, and also offers an echo function."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "BFD on Port Channels",
    "cmd": "BFD on Port Channels",
    "desc": "On port channels, the BFD per-link feature can be used to add resiliency to the port channel's BFD sessions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "BFD Configuration",
    "cmd": "BFD Configuration",
    "desc": "To use BFD as the failure detection mechanism for a routing protocol, it must be enabled for each participating protocol."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "OSPF",
    "title": "Configure BFD for IS-IS",
    "cmd": "router isis 1",
    "desc": "The isis bfd and command configure Bidirectional Forwarding Detection (BFD), a low overhead protocol designed to provide rapid detection of failures at any protocol layer in the path between adjacent forwarding"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "Hardware Accelerated BFD Transmit",
    "cmd": "Hardware Accelerated BFD Transmit",
    "desc": "Hardware Accelerated BFD Transmit adds support for offloading BFD Transmit path to hardware (ASIC) for specific types of BFD sessions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show bfd peers",
    "cmd": "show bfd peers [INFO_LEVEL]",
    "desc": "The show bfd peers command displays information about the neighbors with which the switch currently has a Bidirectional Forwarding Detection (BFD) session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show bfd peers detail",
    "cmd": "show bfd peers detail",
    "desc": "Use the show bfd peers detail to display whether an individual session is hardware accelerated or not."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "session stats snapshot interval (BFD)",
    "cmd": "session stats snapshot interval timer_interval dangerous\nno session stats snapshot interval\ndefault session stats snapshot interval",
    "desc": "The session stats snapshot interval enables the BFD session telemetry on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "sbfd hold down",
    "cmd": "sbfd hold down seconds seconds",
    "desc": "The sbfd hold down command configures S-BFD Hold-down Timers on an SR-TE path."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "HA",
    "title": "vrrp bfd ip",
    "cmd": "vrrp group bfd ip ipv4_address\nno vrrp group bfd ip\ndefault vrrp group bfd ip",
    "desc": "The vrrp bfd ip command enables and configures Bidirectional Forwarding Detection (BFD) for Virtual Router Redundancy Protocol (VRRP) on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "System",
    "title": "Router Control Functions Commands",
    "cmd": "Router Control Functions Commands",
    "desc": "Router General Configuration Mode • control-functions Router Control Functions Commands • code • code unit • commit • compile • discard • edit • pull • push Show Commands • show active • show diff • show pending"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "code",
    "cmd": "code",
    "desc": "The code command allows you to add RCF code directly to the switch through the CLI."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "code unit",
    "cmd": "code unit unit_name",
    "desc": "The code unit command allows the organization of RCF code into named code units."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "commit",
    "cmd": "commit",
    "desc": "The commit command adds all modified code units from the pending buffer to the running-config."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "compile",
    "cmd": "compile",
    "desc": "The compile command compiles all modified code units from the pending buffer and unmodified code units from the running configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "control-functions",
    "cmd": "control-functions",
    "desc": "The control-functions command enters the Router Control Functions Configuration Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "discard",
    "cmd": "discard [unit unit_name | all",
    "desc": "The discard command discards the contents of the pending buffer for the specified code unit, or all code units if specified."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "edit",
    "cmd": "edit",
    "desc": "The edit command allows you to edit RCF code using a GNU nano text editor."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "help attribute",
    "cmd": "help attribute attribute_name",
    "desc": "The help attribute command in the Router General Control Functions Configuration Mode displays information about a specified attribute in an RCF function."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "help function",
    "cmd": "help function function_name",
    "desc": "The help function command in the Router General Control Functions Configuration Mode displays information about a specified built-in function."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "pull",
    "cmd": "pull arg",
    "desc": "The pull command allows the population of the pending buffer for the specified code unit with the contents of the file located at the specified URL."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "push",
    "cmd": "push arg",
    "desc": "The push command pushes the content of the specified code unit from the pending buffer to the location identified by the URL."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show active",
    "cmd": "show active [all]",
    "desc": "The show active command in the Router General Control Functions Configuration Mode displays the configured RCF Functions on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show diff",
    "cmd": "show diff",
    "desc": "The show diff command in the Router General Control Functions Configuration Mode displays the difference between the RCF code units in the pending buffer and the RCF code units in the running configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show pending",
    "cmd": "show pending",
    "desc": "The show pending command in the Router General Control Functions Configuration mode displays the contents of the CLI session pending buffer."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "System",
    "title": "show router rcf code unit",
    "cmd": "show router rcf code unit unit_name",
    "desc": "The show router rcf code unit unit_name command in the Router General Control Functions Configuration Mode displays the committed RCF code units in the running-config."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "System",
    "title": "show router rcf function location",
    "cmd": "show router rcf function location [function function_name][unitunit_name]",
    "desc": "The show router rcf function location function function_name unitunit_name command in the Router General Control Functions Configuration Mode displays the code unit name and starting line number within the code unit for committed RCF function definitions."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN Address Family",
    "cmd": "router bgp 64500",
    "desc": "Inbound BGP Neighbor Application Table 134: Inbound BGP Neighbor Application Syntax address-family evpn neighbor ( NEIGHBOR | PEER_GROUP ) rcf in FUNCTION_NAME()"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "router kernel vrf ABC",
    "cmd": "router kernel vrf ABC",
    "desc": "address-family ipv4 software forwarding hardware offload route rcf OFFLOAD_POLICY() Displaying VrfLeak Agent Status Use the show vrf leak rcf function_name to display the status of the RCF VrfLeak agent on"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "Hardware Dependent Forwarding and Fast Drop",
    "cmd": "Hardware Dependent Forwarding and Fast Drop",
    "desc": "In IP multicast protocols, each (S,G) and (*,G) route corresponds to an inbound Reverse Path Forwarding (RPF) interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "Static Groups and Multicast Router",
    "cmd": "mld snooping",
    "desc": "To configure static groups, refer to the following commands:"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "Static IP Mroute",
    "cmd": "ip mroute 1.1.1.1/32 ethernet 2/1 20",
    "desc": "The Static IP Multicast route (or Static Mroute) interface overrides the interface that is ordinarily selected from the matching route in the unicast routing table, providing a means for breaking dependency on the unicast"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "Static Multicast",
    "cmd": "Static Multicast",
    "desc": "Static Multicast configures multicast routes statically on Arista switches and per VRF granularity."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "switch>",
    "cmd": "show ip mroute 225.1.1.1",
    "desc": "The show ip mroute command displays information from the IP multicast routing table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "activity polling-interval",
    "cmd": "activity polling-interval period\nno activity polling-interval\ndefault activity polling-interval",
    "desc": "The switch records activity levels for multicast routes in the mfib after polling the corresponding hardware activity bits."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "clear ip mfib fastdrop",
    "cmd": "clear ip mfib fastdrop",
    "desc": "The clear ip mfib fastdrop command removes all fast-drop entries from the MFIB table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "clear ip mroute",
    "cmd": "clear ip mroute ENTRY_LIST",
    "desc": "The clear ip mroute command removes route entries from the mroute table, as follows: • clear ip mroute * removes all entries from the mroute table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "clear ip multicast counters",
    "cmd": "clear ip multicast [vrf [vrf-name]] counters group_addr source_addr",
    "desc": "To clear per multicast route ingress counters or clear counters for a particular multicast route, use the clear ip multicast counters command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "hardware counter feature multicast ipv4",
    "cmd": "hardware counter feature multicast ipv4\nno hardware counter feature multicast ipv4\ndefault hardware counter feature multicast ipv4",
    "desc": "Use the hardware counter feature multicast ipv4 command to enable per multicast router ingress packets and byte counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip mfib fastdrop",
    "cmd": "ip mfib fastdrop\nno ip mfib fastdrop\ndefault ip mfib fastdrop",
    "desc": "In IP multicast protocols, every (S,G) or (*,G) route is associated with an inbound Reverse Path Forwarding (RPF) interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip mfib max-fastdrops",
    "cmd": "ip mfib max-fastdrops quantity\nno ip mfib max-fastdrops\ndefault ip mfib max-fastdrops",
    "desc": "The ip mfib max-fastdrops command limits the number of fast-drop routes that the switchs MFIB table can contain."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip mroute",
    "cmd": "ip mroute [source-prefix | source-address mask] [rpf-interface | rpf-neighbor] [admin distance]",
    "desc": "The ip mroute command configures the Static Mroute on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip multicast boundary",
    "cmd": "ip multicast boundary SUBNET [TCAM]\nno ip multicast boundary [SUBNET]\ndefault ip multicast boundary [SUBNET]",
    "desc": "The ip multicast boundary command specifies subnets where source traffic entering the configuration mode interface is dropped, preventing the creation of mroute states on the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip multicast static",
    "cmd": "ip multicast static",
    "desc": "The ip multicast static command enables static multicast routing on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mld last-listener-query-count",
    "cmd": "mld last-listener-query-count number\nno mld last-listener-query-count\ndefault mld last-listener-query-count",
    "desc": "The mld last-listener-query-count command specifies the number of query messages the switch sends in response to a group-specific or group-source-specific leave message."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mld last-listener-query-interval",
    "cmd": "mld last-listener-query-interval period\nno mld last-listener-query-interval\ndefault mld last-listener-query-interval",
    "desc": "The mld last-listener-query-interval command configures the switchs transmission interval for sending group-specific or group-source-specific query messages from the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mld query-interval",
    "cmd": "mld query-interval period\nno mld query-interval\ndefault mld query-interval",
    "desc": "The mld query-interval command configures the frequency at which the configuration mode interface, as an MLD querier, sends host-query messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mld robustness",
    "cmd": "mld robustness robust_value\nno mld robustness\ndefault mld robustness",
    "desc": "The mld robustness command configures the number of general queries to be sent before the router assumes there are no more listeners."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mld startup-query-count",
    "cmd": "mld startup-query-count number\nno mld startup-query-count\ndefault mld startup-query-count",
    "desc": "The mld startup-query-count command specifies the number of query messages that an interface sends during the startup query interval."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mld startup-query-interval",
    "cmd": "mld startup-query-interval period\nno mld startup-query-interval\ndefault mld startup-query-interval",
    "desc": "The mld startup-query-interval command specifies the interval between the general queries sent by a querier on startup."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mld static-group",
    "cmd": "mld static-group source_address [group_address | access-list acl_name]\nno mld static-group source_address [group_address | access-list acl_name]\ndefault mld static-group source_address [group_address | access-list acl_name]",
    "desc": "The mld static-group command configures the configuration mode interface as a static member of a specified multicast group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mld",
    "cmd": "mld [last-listener-query-count | last-listener-query-interval | query-interval | query-response-interval |\nrobustness | startup-query-count | startup-query-interval | static-group]\nno mld\ndefault mld",
    "desc": "The mld command enables multicast listener discovery on an interface which controls the flow of layer 3 IPv6 multicast traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "multipath deterministic",
    "cmd": "multipath deterministic\nno multipath deterministic\ndefault multipath deterministic",
    "desc": "By default, EOS load balances multicast traffic by distributing packets over all ECMP links."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "multipath none",
    "cmd": "multipath none\nno multipath none\ndefault multipath none",
    "desc": "By default, multicast traffic is load balanced by distributing packets over all ECMP links."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "route",
    "cmd": "route group_address [source_address] iif interface [oif interface] [cpu] [iifFrr interface] [priority priority_num]\nno route group_address\ndefault route group_address",
    "desc": "The route command configures a static multicast route for the specified source, destination group, and incoming interface on the router."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "router multicast",
    "cmd": "router multicast",
    "desc": "The router multicast command places the switch in router-multicast configuration mode to configure IPv4 and IPv6 router multicast traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "routing",
    "cmd": "routing\nno routing\ndefault routing",
    "desc": "The routing command allows the switch to forward multicast packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "rpf route",
    "cmd": "rpf route {source_prefix | source_address | mask}{rpf_interface | rpf_neighbor>} [admin_distance]\nno rpf route {source_prefix | source_address | mask}{rpf_interface | rpf_neighbor}\ndefault rpf route {source_prefix | source_address mask}{rpf_interface | rpf_neighbor}",
    "desc": "The rpf route command specifies a candidate for the multicast Reverse Path Forwarding (RPF) interface of any (S,G) multicast route (mroute), where the source falls within the given network prefix."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip mfib counters",
    "cmd": "show ip mfib vrf [vrf-name] group_addr source_addr counters",
    "desc": "Use the show ip mfib counters command to display per multicast route ingress packet and byte counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip mroute",
    "cmd": "show ip mroute\nshow ip mroute gp_addr",
    "desc": "The show ip mroute command displays information from the IP multicast routing table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show ip mroute count",
    "cmd": "show ip mroute count",
    "desc": "The show ip mroute count command displays IP multicast routing table statistics."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip multicast boundary",
    "cmd": "show ip multicast boundary [group_prefix | group_prefix/length [out] | interface {ethernet e_num |\nloopback l_num | management m_num | port-channel p_num | vlan v_num} | out]",
    "desc": "The show ip multicast boundary command displays the summary of all IP multicast boundaries across all interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mld membership",
    "cmd": "show mld membership [dynamic | group | interface | static]",
    "desc": "The show mld membership command displays MLD group and source membership information on a specific interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mld querier",
    "cmd": "show mld querier [interface | parameters]",
    "desc": "The show mld querier command displays information about the MLD querier and querier parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show mld snooping",
    "cmd": "show mld snooping",
    "desc": "Use the show mld snooping command to display the snooping status of the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mld statistics",
    "cmd": "show mld statistics version value",
    "desc": "The show mld statistics command displays total statistics information of incoming and outgoing MLD messages on a specific interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mld summary",
    "cmd": "show mld summary",
    "desc": "The show mld summary command displays MLD summary information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show multicast fib ipv4 software",
    "cmd": "show multicast fib ipv4 software [INFO_LEVEL] [ROUTE]",
    "desc": "The show multicast fib ipv4 software command displays information about the interfaces and the software-forwarded routes included in the IPv4 multicast forwarding information base (MFIB)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show multicast fib ipv4",
    "cmd": "software | sparse-mode | static | summary | vrf]",
    "desc": "The show multicast fib ipv4 command displays information about interfaces and the hardwareforwarded routes included in the IPv4 Multicast Forwarding Information Base (MFIB)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show multicast fib ipv6",
    "cmd": "show multicast fib ipv6",
    "desc": "The show multicast fib ipv6 command displays the Multicast Forwarding Information Base (MFIB) table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show pim ipv6 sparse-mode route",
    "cmd": "show pim ipv6 sparse-mode route",
    "desc": "The show pim ipv6 sparse-mode route command displays the PIM Sparse Mode Multicast Routing table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "unresolved cache-entries max",
    "cmd": "unresolved cache-entries max quantity_entries\nno unresolved cache-entries max\ndefault unresolved cache-entries max",
    "desc": "The unresolved cache-entries max command configures the maximum number of unresolved (S,G) routes that the switch can cache packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "unresolved packet-buffers max",
    "cmd": "unresolved packet-buffers max quantity_packets\nno unresolved packet-buffers max\ndefault unresolved packet-buffers max",
    "desc": "The unresolved packet-buffers max command specifies the number of (S,G) multicast packets for an individual route that the switch can process before the (S,G) entry is entered into cache."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "IGMP and IGMP Snooping",
    "cmd": "IGMP and IGMP Snooping",
    "desc": "• IGMP Snooping • IGMP Host Proxy Description • Supported Features • IGMP Protocols • Configuring IGMP • Configuring IGMP Snooping • IGMP Host Proxy • IGMP and IGMP Snooping Commands"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "IGMP Snooping",
    "cmd": "IGMP Snooping",
    "desc": "Internet Group Management Protocol (IGMP) snooping is a Layer 2 switch process that extracts lists of hosts receiving multicast group traffic by monitoring IGMP network packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "IGMP Host Proxy Description",
    "cmd": "IGMP Host Proxy Description",
    "desc": "The figure displays a typical IGMP host-proxy implementation."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "IGMP Protocols",
    "cmd": "IGMP Protocols",
    "desc": "• IGMP • IGMP Snooping"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "IGMP Snooping L2 Report Flooding",
    "cmd": "ip igmp snooping report-flooding",
    "desc": "L2 report flooding is an IGMP snooping feature that forwards membership report messages to specified ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "IGMP Snooping Filters",
    "cmd": "ip igmp profile list_1",
    "desc": "IGMP snooping filters assign IGMP profiles only to Layer 2 interfaces, and for Layer 3 interfaces use multicast boundary filters to control the multicast groups that the interfaces can join."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "v2",
    "cmd": "v2",
    "desc": "Po1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "v2",
    "cmd": "show igmp snooping querier counters",
    "desc": "Cpu 2028 172."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "IGMP Host Proxy",
    "cmd": "IGMP Host Proxy",
    "desc": "Interfaces on the switch can be configured to serve as IGMP host proxies."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "IGMP Host Proxy Configuration",
    "cmd": "interface ethernet 17",
    "desc": "Enabling IGMP Host Proxy Enable PIM MBR on the interface using the pim ipv4 border-router command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "or Later",
    "cmd": "or Later",
    "desc": "ASU switch N/A Set the Interface Restart Query to 5000: switch(config)# ip igmp snooping interface-restartquery 5000 Action - Configure on ASU switch just prior to initiating ASU."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "and Later",
    "cmd": "and Later",
    "desc": "No losses within a one second window."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "IGMP and IGMP Snooping Commands",
    "cmd": "IGMP and IGMP Snooping Commands",
    "desc": "IGMP Configuration Commands (Interface Configuration Mode) • igmp query-max-response-time • ip igmp last-member-query-count • ip igmp last-member-query-interval • ip igmp query-interval • ip igmp router-alert"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "clear ip igmp group",
    "cmd": "clear ip igmp group [ gp_addr][ interface INT_ID]",
    "desc": "The clear ip igmp group command deletes IGMP cache entries as follows: • clear ip igmp group all entries from the IGMP cache."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "clear ip igmp snooping counters",
    "cmd": "clear ip igmp snooping counters [INT_NAME]",
    "desc": "The clear ip igmp snooping counters command resets the snooping message counters for the specified interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "clear ip igmp statistics",
    "cmd": "clear ip igmp statistics [INTF_ID]",
    "desc": "The clear ip igmp statistics command resets IGMP transmission statistic counters for the specified interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "igmp query-max-response-time",
    "cmd": "igmp query-max-response-time period\nno igmp query-max-response-time\ndefault igmp query-max-response-time",
    "desc": "The igmp query-max-response-time command configures the query-max-response-time variable for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp",
    "cmd": "ip igmp\nno ip igmp",
    "desc": "The ip igmp command enables IGMP on a routed interface or on SVI (VLAN interface) without enabling PIM."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp host-proxy",
    "cmd": "ip igmp host-proxy [GROUP_ADDRESS [SOURCE_ADDRESS]]|[access-list acl]\nno ip igmp host-proxy [GROUP_ADDRESS [SOURCE_ADDRESS]]\ndefault ip igmp host-proxy [GROUP_ADDRESS [SOURCE_ADDRESS]]",
    "desc": "The ip igmp host-proxy command enables the IGMP host proxy service on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp host-proxy report-interval",
    "cmd": "ip igmp host-proxy report-interval period\nno ip igmp host-proxy report-interval\ndefault ip igmp host-proxy report-interval",
    "desc": "The ip igmp host-proxy report-interval command configures the period between unsolicited join reports that the switch sends as an IGMP host proxy from the configuration mode interface to a sender network after a (S,G) or (*,G) entry arrives in the multicast route (mroute) table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp host-proxy version",
    "cmd": "ip igmp host-proxy version version_number\nno ip igmp host-proxy version\ndefault ip igmp host-proxy version",
    "desc": "The ip igmp host-proxy version command configures the version number to be used in unsolicited reports when the interface is serving as an IGMP host proxy."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp last-member-query-count",
    "cmd": "ip igmp last-member-query-count number\nno ip igmp last-member-query-count\ndefault ip igmp last-member-query-count",
    "desc": "The ip igmp last-member-query-count command specifies the number of query messages the switch sends in response to a group-specific or group-source-specific leave message."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp last-member-query-interval",
    "cmd": "ip igmp last-member-query-interval period\nno ip igmp last-member-query-interval\ndefault ip igmp last-member-query-interval",
    "desc": "The ip igmp last-member-query-interval command configures the switch's transmission interval for sending group-specific or group-source-specific query messages from the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp profile",
    "cmd": "ip igmp profile profile_name\nno ip igmp profile profile_name\ndefault igmp profile profile_name",
    "desc": "The ip igmp profile command places the switch in the IGMP-profile configuration mode to configure an IGMP profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp query-interval",
    "cmd": "ip igmp query-interval period\nno ip igmp query-interval\ndefault ip igmp query-interval",
    "desc": "The ip igmp query-interval command configures the frequency at which the configuration mode interface, as an IGMP querier, sends host-query messages."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp router-alert",
    "cmd": "ip igmp router-alert DISPOSITION\nno ip igmp router-alert\ndefault ip igmp router-alert",
    "desc": "The ip igmp router-alert command configures the switch disposition of inbound IGMP packets to the configuration mode interface based on the presence of the router-alert option in the IP header."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping",
    "cmd": "ip igmp snooping\nno ip igmp snooping\ndefault ip igmp snooping",
    "desc": "The ip igmp snooping command enables snooping globally."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping filter",
    "cmd": "ip igmp snooping filter profile_name\nno ip igmp snooping filter [profile_name]\ndefault ip igmp snooping filter [profile_name]",
    "desc": "The ip igmp snooping filter command applies the specified IGMP snooping profile to the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping interface-restart-query",
    "cmd": "ip igmp snooping interface-restart-query query_time\nno ip igmp snooping interface-restart-query\ndefault ip igmp snooping interface-restart-query",
    "desc": "The ip igmp snooping interface-restart-query command configures the interface startup initial query time used for IGMP query spoofing."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping proxy",
    "cmd": "ip igmp snooping proxy\nno ip igmp snooping proxy\ndefault ip igmp snooping proxy",
    "desc": "The ip igmp snooping proxy command enables snooping proxy globally."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping querier",
    "cmd": "ip igmp snooping querier\nno ip igmp snooping querier\ndefault ip igmp snooping querier",
    "desc": "The ip igmp snooping querier command enables the snooping querier globally, which controls the querier for VLANs that are not configured with a snooping querier command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping querier address",
    "cmd": "ip igmp snooping querier address ipv4_address\nno ip igmp snooping querier address\ndefault ip igmp snooping querier address",
    "desc": "The ip igmp snooping querier address command sets the global querier source IP address, which specifies the source address for packets transmitted from VLANs for which a querier address (ip igmp snooping vlan querier address) is not configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping querier last-member-query-count",
    "cmd": "ip igmp snooping querier last-member-query-count number\nno ip igmp snooping querier last-member-query-count\ndefault ip igmp snooping querier last-member-query-count",
    "desc": "The ip igmp snooping querier last-member-query-count command configures the global igmp snooping querier last member query count (LMQC) value."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping querier last-member-query-interval",
    "cmd": "ip igmp snooping querier last-member-query-interval period\nno ip igmp snooping querier last-member-query-interval\ndefault ip igmp snooping querier last-member-query-interval",
    "desc": "The ip igmp snooping querier last-member-query-interval command sets the global IGMP snooping last member query interval."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping querier max-response-time",
    "cmd": "ip igmp snooping querier max-response-time resp_sec\nno ip igmp snooping querier max-response-time\ndefault ip igmp snooping querier max-response-time",
    "desc": "The ip igmp snooping querier max-response-time command specifies the global maxresponse-time value."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping querier query-interval",
    "cmd": "ip igmp snooping querier query-interval query_sec\nno ip igmp snooping querier query-interval\ndefault ip igmp snooping querier query-interval",
    "desc": "The ip igmp snooping querier query-interval command sets the global query interval."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping querier startup-query-count",
    "cmd": "ip igmp snooping querier startup-query-count number\nno ip igmp snooping querier startup-query-count\ndefault ip igmp snooping querier startup-query-count",
    "desc": "The ip igmp snooping querier startup-query-count command configures the global startup query count value."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping querier startup-query-interval",
    "cmd": "ip igmp snooping querier startup-query-interval period\nno ip igmp snooping querier startup-query-count\ndefault ip igmp snooping querier startup-query-count",
    "desc": "The ip igmp snooping querier startup-query-interval command configures the global startup query interval value."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping querier version",
    "cmd": "ip igmp snooping querier version version_number\nno ip igmp snooping querier startup-query-count\ndefault ip igmp snooping querier startup-query-count",
    "desc": "The ip igmp snooping querier version command configures the Internet Group Management Protocol (IGMP) snooping querier version on the configuration mode interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping report-flooding switch-port",
    "cmd": "ip igmp snooping report-flooding switch-port INTERFACE\nno ip igmp snooping report-flooding switch-port INTERFACE\ndefault ip igmp snooping report-flooding switch-port INTERFACE",
    "desc": "The ip igmp snooping report-flooding switch-port command specifies Ethernet ports or port channels that can forward IGMP membership report messages for all VLANs where L2 report flooding is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping restart query-interval",
    "cmd": "ip igmp snooping restart query-interval query_sec\nno ip igmp snooping restart query-interval\ndefault ip igmp snooping restart query-interval",
    "desc": "The ip igmp snooping restart query-interval command sets the query interval for all VLANs during an IGMP snooping restart."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping robustness-variable",
    "cmd": "ip igmp snooping robustness-variable robust_value\nno ip igmp snooping robustness-variable\ndefault ip igmp snooping robustness-variable",
    "desc": "The ip igmp snooping robustness-variable command configures the robustness variable for snooping packets sent from any VLAN."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan",
    "cmd": "ip igmp snooping vlan v_range\nno ip igmp snooping vlan v_range\ndefault ip igmp snooping vlan v_range",
    "desc": "The ip igmp snooping vlan command enables snooping on the specified VLANs if snooping is globally enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan fast-leave",
    "cmd": "ip igmp snooping vlan v_range fast-leave\nno ip igmp snooping vlan v_range fast-leave\ndefault ip igmp snooping vlan v_range fast-leave",
    "desc": "The ip igmp snooping vlan fast-leave command enables fast-leave processing on specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan max-groups",
    "cmd": "ip igmp snooping vlan v_range max-groups quantity\nno ip igmp snooping vlan v_range max-groups\ndefault ip igmp snooping vlan v_rangemax-groups",
    "desc": "The ip igmp snooping vlan max-groups command configures the quantity of multicast groups that the specified VLAN forwarding table can contain."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan member",
    "cmd": "ip igmp snooping vlan v_num member ipv4_addr interface STATIC_INT\nno ip igmp snooping vlan v_num member ipv4_addr interface STATIC_INT\ndefault ip igmp snooping vlan v_num member ipv4_addr interface STATIC_INT",
    "desc": "The ip igmp snooping vlan member command adds ports as static members to a multicast group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan multicast-router",
    "cmd": "ip igmp snooping vlan v_range multicast-router interface STATIC_INT\nno ip igmp snooping vlan v_range multicast-router interface STATIC_INT\ndefault ip igmp snooping vlan v_range multicast-router interface STATIC_INT",
    "desc": "The ip igmp snooping vlan multicast-router command adds a multicast router as a static port to the specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan proxy",
    "cmd": "ip igmp snooping vlan [ID | range]proxy\nno ip igmp snooping vlan [ID | range] proxy\ndefault ip igmp snooping vlan [ID | range] proxy",
    "desc": "The ip igmp snooping vlan proxy command enables snooping proxy on individual VLAN."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan querier",
    "cmd": "ip igmp snooping vlan v_range querier\nno ip igmp snooping vlan v_range querier\ndefault ip igmp snooping vlan v_range querier",
    "desc": "The ip igmp snooping vlan querier command controls the querier for the specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan querier address",
    "cmd": "ip igmp snooping vlan v_range querier address ipv4_address\nno ip igmp snooping vlan v_range querier address\ndefault ip igmp snooping vlan v_range querier address",
    "desc": "The ip igmp snooping vlan querier address command sets the source address for query packets sent from specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan querier last-member-query-count",
    "cmd": "ip igmp snooping vlan v_range querier last-member-query-count number\nno ip igmp snooping vlan v_range querier address\ndefault ip igmp snooping vlan v_range querier address",
    "desc": "The ip igmp snooping vlan querier last-member-query-count command specifies an IGMP snooping querier last-member-query-count (LMQC) value for the specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan querier last-member-query-interval",
    "cmd": "ip igmp snooping vlan v_range querier last-member-query-interval period\nno ip igmp snooping vlan v_range querier last-member-query-interval\ndefault ip igmp snooping vlan v_range querier last-member-query-interval",
    "desc": "The ip igmp snooping vlan querier last-member-query-interval command configures last-member-query-interval for packets sent from the specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan querier max-response-time",
    "cmd": "ip igmp snooping vlan v_range querier max-response-time resp_sec\nno ip igmp snooping vlan v_range querier max-response-time\ndefault ip igmp snooping vlan v_range querier max-response-time",
    "desc": "The ip igmp snooping vlan querier max-response-time command configures max-responsetime for packets sent from the specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan querier query-interval",
    "cmd": "ip igmp snooping vlan v_range querier query-interval query_sec\nno ip igmp snooping vlan v_range querier query-interval\ndefault ip igmp snooping vlan v_range querier query-interval",
    "desc": "The ip igmp snooping vlan querier query-interval command sets the query interval for the specified VLAN."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan querier startup-query-count",
    "cmd": "ip igmp snooping vlan v_range querier startup-query-count number\nno ip igmp snooping vlan v_range querier startup-query-count\ndefault ip igmp snooping vlan v_range querier startup-query-count",
    "desc": "The ip igmp snooping vlan querier startup-query-count command specifies the startup query count value for the specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan querier startup-query-interval",
    "cmd": "ip igmp snooping vlan v_range querier startup-query-interval period\nno ip igmp snooping vlan v_range querier startup-query-interval\ndefault ip igmp snooping vlan v_range querier startup-query-interval",
    "desc": "The ip igmp snooping vlan querier startup-query-interval command specifies the startup query interval value for the specified VLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan querier version",
    "cmd": "ip igmp snooping vlan v_range querier version version_number\nno ip igmp snooping vlan v_range querier version\ndefault ip igmp snooping vlan v_range querier version",
    "desc": "The ip igmp snooping vlan querier version command configures the Internet Group Management Protocol (IGMP) snooping querier function on the VLAN."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan report-flooding",
    "cmd": "ip igmp snooping vlan v_range report-flooding\nno ip igmp snooping vlan v_range report-flooding\ndefault ip igmp snooping vlan v_range report-flooding",
    "desc": "The ip igmp snooping vlan report-flooding command enables L2 report flooding on the specified VLANs if report flooding is globally enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp snooping vlan report-flooding switch-port",
    "cmd": "ip igmp snooping vlan v_range report-flooding switch-port INTERFACE\nno ip igmp snooping vlan v_range report-flooding switch-port INTERFACE\ndefault ip igmp snooping vlan v_rangereport-flooding switch-port INTERFACE",
    "desc": "The ip igmp snooping vlan report-flooding switch-port command configures Ethernet ports or port channels to forward IGMP membership report messages for a specified VLAN range where L2 report flooding is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp startup-query-count",
    "cmd": "ip igmp startup-query-count number\nno ip igmp startup-query-count\ndefault ip igmp startup-query-count",
    "desc": "The ip igmp startup-query-count command specifies the number of query messages that an interface sends during the startup interval defined by ip igmp startup-query-interval."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp startup-query-interval",
    "cmd": "ip igmp startup-query-interval period\nno ip igmp startup-query-interval\ndefault ip igmp startup-query-interval",
    "desc": "The ip igmp startup-query-interval command specifies the configuration mode interface IGMP startup period, during which query messages are sent at an accelerated rate."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp static-group",
    "cmd": "ip igmp static-group group_address [SOURCE_ADDRESS]\nno ip igmp static-group group_address [SOURCE_ADDRESS]\ndefault ip igmp static-group group_address [SOURCE_ADDRESS]",
    "desc": "The ip igmp static-group command configures the configuration mode interface as a static member of a specified multicast group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp static-group acl",
    "cmd": "ip igmp static-group acl list_name\nno ip igmp static-group acl\ndefault ip igmp static-group acl",
    "desc": "The ip igmp static-group acl command configures the configuration mode interface as a static member of the multicast groups specified by an IP Access Control List (ACL)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp static-group range",
    "cmd": "ip igmp static-group range GROUP_ADDR[SOURCE_ADDR]\nno ip igmp static-group range GROUP_ADDR[SOURCE_ADDR]\ndefault ip igmp static-group range GROUP_ADDR[SOURCE_ADDR]",
    "desc": "The ip igmp static-group range command configures the configuration mode interface as a static member of multicast groups specified by an address range."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip igmp version",
    "cmd": "ip igmp version version_number\nno ip igmp version\ndefault ip igmp version",
    "desc": "The ip igmp version command configures the Internet Group Management Protocol (IGMP) version on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "permit / deny",
    "cmd": "permit\ndeny",
    "desc": "The permit command configures the configuration mode IGMP profile as a permit list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "range",
    "cmd": "range init_address [UPPER_RANGE]\nno range init_address [UPPER_RANGE]\ndefault range init_address [UPPER_RANGE]",
    "desc": "The range command specifies an address range for the configuration mode IGMP profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show igmp snooping querier",
    "cmd": "show igmp snooping querier [STATUS][VLAN_ID][DATA]",
    "desc": "The show igmp snooping querier command displays snooping querier configuration and status information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show igmp snooping querier counters",
    "cmd": "show igmp snooping querier counters [VLAN_ID]",
    "desc": "The show igmp snooping querier counters command displays the counters from the querier, as learned through Internet Group Management Protocol (IGMP)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show igmp snooping querier membership",
    "cmd": "show igmp snooping querier membership [VLAN_ID [GROUP_LIST]]",
    "desc": "The show igmp snooping querier membership command displays the membership from the querier, as learned through Internet Group Management Protocol (IGMP)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp groups",
    "cmd": "show ip igmp groups GROUP_LIST [DATA]",
    "desc": "The show ip igmp groups command displays multicast groups that have receivers directly connected to the switch, as learned through Internet Group Management Protocol (IGMP)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp groups count",
    "cmd": "show ip igmp groups [GROUP_LIST] count",
    "desc": "The show ip igmp groups count command displays the number of multicast groups that are joined across the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp host-proxy config-sanity",
    "cmd": "show ip igmp host-proxy config-sanity",
    "desc": "The show ip igmp host-proxy config-sanity command displays diagnostic information about an IGMP host proxy configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp host-proxy interface",
    "cmd": "show ip igmp host-proxy interface [interface] [detail]",
    "desc": "The show ip igmp host-proxy interface command displays per-interface IGMP host-proxy configuration information, including the IGMP groups joined on the interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp interface",
    "cmd": "show ip igmp interface [INT_NAME]",
    "desc": "The show ip igmp interface command displays multicast information about the specified interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp profile",
    "cmd": "show ip igmp profile [PROFILES]",
    "desc": "The show ip igmp profile command displays the contents of the specified IGMP profile."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp snooping",
    "cmd": "show ip igmp snooping [VLAN_ID]",
    "desc": "The show ip igmp snooping command displays the switch IGMP snooping configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp snooping counters",
    "cmd": "show ip igmp snooping counters [DATA_TYPE][DATA_LEVEL]",
    "desc": "The show ip igmp snooping counters command displays the number of IGMP messages sent and received through each switch port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp snooping counters ethdev-pams",
    "cmd": "show ip igmp snooping counters ethdev-pams",
    "desc": "The show ip igmp snooping counters command displays the number of dropped IGMP packets messages sent and received through each switch port at the kernel level."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp snooping groups",
    "cmd": "show ip igmp snooping groups proxy [VLAN_ID][PORT_INT][GROUPS][DATA local]",
    "desc": "The show ip igmp snooping groups command displays IGMP snooping statistics."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp snooping groups count",
    "cmd": "show ip igmp snooping groups [VLAN_ID][PORT_INT] count [DATA]",
    "desc": "The show ip igmp snooping groups count command displays the number of multicast groups on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp snooping mrouter",
    "cmd": "show ip igmp snooping mrouter [VLAN_ID][DATA]",
    "desc": "The show ip igmp snooping mrouter command displays the status of dynamic and static multicast router ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp snooping report-flooding",
    "cmd": "show ip igmp snooping report-flooding [VLAN_ID][DATA]",
    "desc": "The show ip igmp snooping report-flooding command displays IGMP snooping L2 report flooding configuration and status information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp static-groups",
    "cmd": "show ip igmp static-groups [INFO_LEVEL][interface INT_NAME]",
    "desc": "The show ip igmp static-groups command displays information about all configured IGMP multicast static groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp static-groups acl",
    "cmd": "show ip igmp static-groups acl",
    "desc": "The show ip igmp static-groups acl command displays information about the IGMP multicast static groups that are configured by the specified Access Control List (ACL)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp static-groups group",
    "cmd": "show ip igmp static-groups group [GROUP_LIST]",
    "desc": "The show ip igmp static-groups group command displays information about all specified IGMP multicast static groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip igmp statistics",
    "cmd": "show ip igmp statistics [INTERFACE_ID]",
    "desc": "The show ip igmp statistics command displays IGMP transmission statistics for the specified interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "Protocol Independent Multicast",
    "cmd": "Protocol Independent Multicast",
    "desc": "Protocol Independent Multicast (PIM) distributes multicast data using routes gathered by other protocols."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "PIM Sparse Mode",
    "cmd": "PIM Sparse Mode",
    "desc": "In PIM-SM, each host (sender or receiver) is associated with a Designated Router (DR) that acts for all directly connected hosts in PIM-SM transactions, and trees are unidirectional."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "PIM Commands",
    "cmd": "PIM Commands",
    "desc": "PIM Configuration Commands (Global) • anycast-rp • candidate • fast-reroute • group-expiry-timer • holdtime • ip pim dr-notify-delay • log neighbors • register local-interface • router pim bidirectional"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "anycast-rp",
    "cmd": "anycast-rp rp_addr peer_addr [REGISTER]\nno anycast-rp rp_addr [peer_addr]\ndefault anycast-rp rp_addr [peer_addr]",
    "desc": "The anycast-rp command configures the switch as a member of an anycast-RP set and establishes a communication link with another member of the set."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "candidate",
    "cmd": "candidate INTERFACE [HASHMASK_LENGTH][INTERVAL_PERIOD][PRIORITY_NUM]\nno candidate [priority][interval]\ndefault candidate[priority][interval]",
    "desc": "The candidate command configures the switch as a Candidate BSR router (C-BSR)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "fast-reroute",
    "cmd": "fast-reroute acl_name\nno fast-reroute acl_name\ndefault fast-reroute acl_name",
    "desc": "The fast-reroute command enables Multicast only Fast Re-Route (MoFRR) to minimize traffic loss in a network when a link or node failure occurs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "group-expiry-timer",
    "cmd": "group-expiry-timer value\nno group-expiry-timer value\ndefault group-expiry-timer value",
    "desc": "The group-expiry-timer command sets the group-expiry-timer in seconds after which a group with no activity gets deleted from the PIM Rendezvous Point (RP) tree."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "holdtime",
    "cmd": "holdtime period\nno holdtime\ndefault holdtime",
    "desc": "The holdtime command specifies the value the switch inserts in the holdtime parameter field in BootStrap Messages (BSM) that it sends."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip pim dr-notify-delay",
    "cmd": "ip pim dr-notify-delay notify_delay_time\nno ip pim dr-notify-delay\ndefault ip pim dr-notify-delay",
    "desc": "The ip pim dr-notify-delay command sets the designated router (DR) notification delay."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ipv4",
    "cmd": "ipv4",
    "desc": "The ipv4 command places the switch in the IPv4 submode for the PIM configuration mode in which it is entered."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "log neighbors",
    "cmd": "log neighbors\nno log neighbors\ndefault log neighbors",
    "desc": "The log neighbors command configures the switch to generate a log message when a neighbor entry is added or removed from the PIM Neighbor table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim bsr ipv4 border",
    "cmd": "pim bsr ipv4 border\nno pim bsr ipv4 border\ndefault pim bsr ipv4 border",
    "desc": "The pim bsr ipv4 border command prevents the switch from sending BootStrap router Messages (BSMs) over the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim ipv4 bidirectional",
    "cmd": "pim ipv4 bidirectional\nno pim ipv4\nno pim ipv4 bidirectional\ndefault pim ipv4\ndefault pim ipv4 bidirectional",
    "desc": "The pim ipv4 bidirectional command enables PIM bidirectional and IGMP (router mode) on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim ipv4 border-router",
    "cmd": "pim ipv4 border-router\nno pim ipv4 border-router\ndefault pim ipv4 border-router",
    "desc": "The pim ipv4 border-router command configures the configuration mode interface as a PIM Multicast Border Router (MBR)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim ipv4 dr-priority",
    "cmd": "pim ipv4 dr-priority level\nno pim ipv4 dr-priority [level]\ndefault pim ipv4 dr-priority [level]",
    "desc": "PIM-SM uses these criteria for electing a Designated Router (DR): • If at least one router does not advertise a DR priority value, then PIM-SM elects the router with the highest IP address as the DR."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim ipv4 hello count",
    "cmd": "pim ipv4 hello count [multiple]\nno pim ipv4 hello count [multiple]",
    "desc": "The pim ipv4 hello count command sets the PIM hello count for the interface being configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim ipv4 hello interval",
    "cmd": "pim ipv4 hello interval period\nno pim ipv4 hello interval [period]\ndefault pim ipv4 hello interval [period]",
    "desc": "The pim ipv4 hello interval command specifies the transmission interval between PIM hello messages originating from the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim ipv4 join-prune count",
    "cmd": "pim ipv4 join-prune count count_value\nno pim ipv4 join-prune count count_value\ndefault pim ipv4 join-prune count count_value",
    "desc": "The pim ipv4 join-prune count command configures the number of times a join or prune messages can be missed before the upstream neighbor time expires."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim ipv4 join-prune interval",
    "cmd": "pim ipv4 join-prune interval [period]\nno pim ipv4 join-prune interval [period]\ndefault pim ipv4 join-prune interval [period]",
    "desc": "The pim ipv4 join-prune interval command specifies the period between join or prune messages that the configuration mode interface originates and sends to the upstream RPF neighbor."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim ipv4 neighbor-filter",
    "cmd": "pim ipv4 neighbor-filter access_list\nno pim ipv4 neighbor-filter\ndefault pim ipv4 neighbor-filter",
    "desc": "The pim ipv4 neighbor-filter command configures the configuration mode interface to filter PIM control packets on the basis of neighbor addresses listed in a specified standard access list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "pim ipv4 sparse-mode",
    "cmd": "pim ipv4 sparse-mode\nno pim ipv4\nno pim ipv4 sparse-mode\ndefault pim ipv4\ndefault pim ipv4 sparse-mode",
    "desc": "The pim ipv4 sparse-mode command enables PIM IPv4 Sparse Mode (PIM-SM) and IGMP (router mode) on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "register checksum",
    "cmd": "register checksum [full | header]",
    "desc": "The register checksum command in the Router PIM Sparse-Mode IPv6 Configuration Mode configures a checksum to use for PIM IPv6 register messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "register local-interface",
    "cmd": "register local-interface INT_NAME\nno register local-interface\ndefault register local-interface",
    "desc": "The register local-interface command programs the switch to fill the source field in all outbound PIM SM register packets with the IP address of a specified interface or the incoming interface of the group specified by the message."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "router pim bidirectional",
    "cmd": "router pim bidirectional",
    "desc": "The router pim bidirectional command places the switch in the router-pimbidirectional configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "router pim bsr",
    "cmd": "router pim bsr",
    "desc": "The router pim bsr command places the switch in the router-pim bsr configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "router pim sparse-mode",
    "cmd": "router pim sparse-mode",
    "desc": "The router pim sparse-mode command places the switch in the router-pim sparse-mode configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "rp address",
    "cmd": "rp address rp_addr [MULTICAST_SUBNET][HASHMASK_LENGTH][BSR_OVERRIDE]\nno rp address rp_addr [MULTICAST_SUBNET]\ndefault rp address rp_addr [MULTICAST_SUBNET]",
    "desc": "The rp address command configures the address of a Protocol Independent Multicast (PIM) static Rendezvous Point (RP) for a specified multicast subnet."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "rp allow",
    "cmd": "rp allow\nno rp allow\ndefault rp allow",
    "desc": "The rp allow command accepts and allows PIM (*,G) join message with an RP address that is different from the configured RPs for that particular (*,G)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "rp candidate",
    "cmd": "any order.\nrp candidate INTERFACE [GROUP_ADDR][PRIORITY_NUM][INTERVAL_PERIOD]\nno rp candidate [INTERFACE][GROUP_ADDR]\nno rp candidate [INTERFACE] interval\nno rp candidate [INTERFACE] priority\ndefault rp candidate [INTERFACE][GROUP_ADDR]\ndefault rp candidate [INTERFACE] interval\ndefault rp candidate [INTERFACE] priority",
    "desc": "The rp candidate command configures the switch as a Candidate Rendezvous Point (C-RP)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "rp hash algorithm modulo",
    "cmd": "rp hash algorithm modulo\nno rp hash algorithm modulo\ndefault rp hash algorithm modulo",
    "desc": "The rp hash algorithm modulo command configures the load-balancing scheme across available Rendezvous Points (RP)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "rp-candidate advertisement-filter",
    "cmd": "rp-candidate advertisement-filter access-list access-list_name\nno rp-candidate advertisement-filter access-list access-list_name\ndefault rp-candidate advertisement-filter access-list access-list_name",
    "desc": "The rp-candidate advertisement-filter command filters the RP candidate advertisements from certain IP addresses."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "sg-expiry-timer",
    "cmd": "sg-expiry-timer period\nno sg-expiry-timer\ndefault sg-expiry-timer",
    "desc": "The sg-expiry-timer command configures the (S, G) expiry timer interval for PIM-SM (S, G) multicast routes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip pim bsr",
    "cmd": "show ip pim bsr [GROUP_FILTER]",
    "desc": "The show ip pim bsr command displays the switchs BootStrap Router (BSR) information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip pim config-sanity",
    "cmd": "show ip pim config-sanity",
    "desc": "The show ip pim config-sanity command displays diagnostic information about the switch's PIM configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip pim interface",
    "cmd": "show ip pim interface [INT_NAME][INFO_LEVEL]",
    "desc": "The show ip pim interface command displays information about interfaces configured for PIM."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip pim neighbor",
    "cmd": "show ip pim neighbor [INT_NAME][BFD_DATA]",
    "desc": "The show ip pim neighbor command displays information about Protocol Independent Multicast (PIM) neighbors discovered by hello messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip pim protocol counters",
    "cmd": "show ip pim protocol counters [INT_NAME]",
    "desc": "The show ip pim protocol command displays statistics about Protocol Independent Multicast (PIM) control messages sent and received by the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip pim register-source",
    "cmd": "show ip pim register-source",
    "desc": "The show ip pim register-source command displays the name of the interface from where the switch derives the IP address that it uses to fill the source field in all outbound PIM SM register packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip pim rp",
    "cmd": "show ip pim rp",
    "desc": "The show ip pim rp command displays the status and multicast group of each cached Rendezvous Point (RP)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip pim rp-candidate",
    "cmd": "show ip pim rp-candidate",
    "desc": "The show ip pim rp-candidate command displays the Rendezvous Point (RP) that is used for a specified multicast group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip pim rp-hash",
    "cmd": "show ip pim rp-hash ipv4_addr [INFO_LEVEL]",
    "desc": "The show ip pim rp-hash displays the group to RP-hash mapping for the specified group and the list of qualifying candidate RPs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip pim upstream joins",
    "cmd": "show ip pim upstream joins [JOIN_ADDRESSES] [NEIGHBOR_FILTER]",
    "desc": "The show ip pim upstream joins command displays the join messages that the switch is scheduled to send."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "spt threshold",
    "cmd": "spt threshold {0 | infinity}[match list acl_name]\nno spt threshold {0 | infinity}[match list acl_name]\ndefault spt threshold{0 | infinity} [match list acl_name]",
    "desc": "The spt threshold command configures Shortest Path Tree (SPT) threshold actions for IPv4 multicast groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "ssm range",
    "cmd": "ssm range {acl_name | standard}\nno ssm range\ndefault ssm range",
    "desc": "The ssm range command defines the Source Specific Multicast (SSM) range of IP multicast addresses."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "MSDP Introduction",
    "cmd": "MSDP Introduction",
    "desc": "Arista switches support the following MSDP features: • Basic MSDP speaker functions • MSDP peer configuration - description, connect-source interface, keepalive time, and hold time."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "MSDP Description",
    "cmd": "MSDP Description",
    "desc": "The Multicast Source Discovery Protocol (MSDP) defines a topology connecting Protocol Independent Multicast sparse mode (PIM-SM) domains."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "MSDP Speakers",
    "cmd": "MSDP Speakers",
    "desc": "An MSDP speaker is a router in a PIM-SM domain that has MSDP peering sessions with MSDP peers in other domains."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "Network Configuration",
    "cmd": "Network Configuration",
    "desc": "The TCP connections between RPs are defined either through an underlying unicast routing table or by configuring a default MSDP peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "Default MSDP Peers",
    "cmd": "Default MSDP Peers",
    "desc": "The default peer is the MSDP peer from which the MSDP speaker accepts SA messages."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "MSDP Exchange Processes",
    "cmd": "MSDP Exchange Processes",
    "desc": "• Control Information Exchange • MSDP Data Exchange"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "MSDP Data Exchange",
    "cmd": "MSDP Data Exchange",
    "desc": "This sequence describes the exchange of multicast data across PIM domains through MSDP: 1."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "MSDP Configuration",
    "cmd": "MSDP Configuration",
    "desc": "These sections describe the configuration of the switch as an MSDP speaker and the establishment of MSDP peering sessions."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "MSDP Speaker Configuration",
    "cmd": "router msdp",
    "desc": "The switch is configured as an MSDP speaker when MSDP is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "originator-id local-interface",
    "cmd": "originator-id local-interface INTERFACE\nno originator-id local-interface INTERFACE\ndefault originator-id local-interface INTERFACE",
    "desc": "The originator-id local-interface command configures an originator ID to replace the Rendezvous Point (RP) address in Source-Address (SA) messages that it originates as an MSDP speaker."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "peer",
    "cmd": "peer ip_address",
    "desc": "The peer command configures the specified address as an MSDP peer, enables MSDP on the switch if it was not previously enabled, and places the switch in Router MSDP Peer Configuration Mode for the specified peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "sa-filter in",
    "cmd": "sa-filter in list list_name\nno sa-filter in\ndefault sa-filter in",
    "desc": "The sa-filter in command assigns an IP Access Control List (ACL) as a filter for inbound Source-Active (SA) messages from the configuration-mode MSDP peer connection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "sa-filter out",
    "cmd": "sa-filter out list list_name\nno sa-filter out\ndefault sa-filter out",
    "desc": "The sa-filter out command assigns an IP Access Control List (ACL) as a filter for outbound SourceActive (SA) messages to the configuration-mode MSDP peer connection, after which the permit statement allows matching SAs to be advertised outbound to the peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "sa-limit",
    "cmd": "sa-limit quantity\nno sa-limit\ndefault sa-limit",
    "desc": "The sa-limit command specifies the maximum number of Source-Active messages from a specified MSDP peer that the switch allows in the SA cache."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip msdp peer",
    "cmd": "show ip msdp peer [PEER_ADDR][SA_ACCEPT]",
    "desc": "The show ip msdp peer command displays information about specified MSDP peers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip msdp pim sa-cache",
    "cmd": "show ip msdp pim sa-cache",
    "desc": "The show ip msdp pim sa-cache command displays the SA cache for the local PIM domain configured on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip msdp sa-cache",
    "cmd": "show ip msdp sa-cache [ADDRESS_FILTER][CONTENTS]",
    "desc": "The show ip msdp sa-cache command displays contents of the Source-Active (SA) message cache."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip msdp sanity",
    "cmd": "show ip msdp sanity",
    "desc": "The show ip msdp sanity command performs a consistency check between the multicast routing table and the MSDP Source-Address (SA) caches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show ip msdp summary",
    "cmd": "show ip msdp summary",
    "desc": "The show ip msdp summary command displays a list of peer addresses, the operational status of the peer, and the number of Source-Active messages in the SA cache from that peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "Listen 0",
    "cmd": "Listen 0",
    "desc": "Up"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show msdp mesh-group",
    "cmd": "show msdp mesh-group",
    "desc": "The show msdp mesh-group command displays the mesh group membership of MSDP peers that are configured on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "MSDP Commands",
    "cmd": "MSDP Commands",
    "desc": "MSDP Configuration Commands (Global) • connection retry interval • forward register-packets (MSDP) • group-limit • ip msdp rejected-limit • originator-id local-interface • peer • router msdp MSDP Peer Configuration Commands"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "clear ip msdp sa-cache",
    "cmd": "clear ip msdp sa-cache [ADDRESS_FILTER]",
    "desc": "The clear ip msdp sa-cache command removes contents of the Source-Active (SA) message cache."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "connection retry interval",
    "cmd": "connection retry interval connect_retry\nno connection retry interval connect_retry\ndefault connection retry interval connect_retry",
    "desc": "The connection retry interval command specifies the period that the switch waits after an MSDP peering session is reset before trying to reestablish the session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "default-peer",
    "cmd": "default-peer [PREFIX]\nno default-peer\ndefault default-peer",
    "desc": "The default-peer command configures the specified MSDP peer connection as a default peer on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "description (MSDP)",
    "cmd": "description description_string\nno description\ndefault description",
    "desc": "The description command associates descriptive text with the configuration-mode MSDP peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "disabled (MSDP)",
    "cmd": "disabled\nno disabled\ndefault disabled",
    "desc": "The disabled command closes the peering session with the specified MSDP peer by terminating the TCP connection between the switch and the peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "forward register-packets (MSDP)",
    "cmd": "forward register-packets\nno forward register-packets\ndefault forward register-packets",
    "desc": "The forward register-packets command enables the encapsulation of multicast data packets on the sending MSDP peer and the decapsulation and forwarding on a receiving MSDP peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "group-limit",
    "cmd": "group-limit quantity sourcesrc_subnet\nno group-limit quantity source src_subnet\ndefault group-limit quantity source src_subnet",
    "desc": "The group-limit command specifies the maximum number of Source-Active (SA) messages that the switch allows in the SA cache for a specified multicast group address."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "ip msdp rejected-limit",
    "cmd": "ip msdp rejected-limit quantity\nno ip msdp rejected-limit\ndefault ip msdp rejected-limit",
    "desc": "The ip msdp rejected-limit command specifies the maximum number of rejected Source-Active messages that the switch allows in the SA cache."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "keepalive (MSDP)",
    "cmd": "keepalive keep_alive hold_time\nno keepalive\ndefault keepalive",
    "desc": "The keepalive command configures the MSDP keep-alive and hold time intervals for a specified MSDP peer connection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "local-interface",
    "cmd": "local-interface interface\nno local-interface\ndefault local-interface",
    "desc": "MSDP peering sessions are established over a TCP connection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mesh-group",
    "cmd": "mesh-group group_name\nno mesh-group group_name\ndefault mesh-group group_name",
    "desc": "The mesh-groupcommand configures the configuration-mode MSDP peer connection as an MSDP mesh group member."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show msdp rpf-peer",
    "cmd": "show msdp rpf-peer rp_addr",
    "desc": "The show msdp rpf-peer command displays MSDP information for the peer from which the switch accepts SA messages for a specified Rendezvous Point (RP)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "AVB Overview",
    "cmd": "AVB Overview",
    "desc": "Audio Video Bridging (AVB) is a protocol set that provides precision time synchronization, admission control, queuing reservation, and guaranteed bandwidth of professional grade quality audio and video across an"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "AVB Protocols",
    "cmd": "AVB Protocols",
    "desc": "This section describes supported AVB protocols: • gPTP • MVRP • MSRP • MRP"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "gPTP",
    "cmd": "gPTP",
    "desc": "Generalized Precision Time Protocol (gPTP) is a network time synchronization standard for bridged Local Area Networks based on the IEEE 1588v2 Precision Time Protocol and supports the AVB protocol standards."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "AVB Configuration",
    "cmd": "AVB Configuration",
    "desc": "This section describes the AVB configuration: • Enabling gPTP • Enabling MSRP • Displaying MSRP Configuration and Status • Enabling MVRP • Displaying MVRP Configuration and Status"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "AVB Commands",
    "cmd": "AVB Commands",
    "desc": "MSRP Commands • msrp • msrp streams load-file • show msrp • show msrp interfaces • show msrp streams MRP Commands • mrp leave-all-timer • mrp leave-timer MVRP Commands • show mvrp"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mrp leave-all-timer",
    "cmd": "mrp leave-all-timer period\nmrp leave-all-timer\ndefault mrp leave-all-timer\nno mrp leave-all-timer",
    "desc": "The mrp leave-all-timer command specifies the mrp leave all timer interval for the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "mrp leave-timer",
    "cmd": "mrp leave-timer period\nno mrp leave-timer\ndefault mrp leave-timer",
    "desc": "The leave-timer controls the de-registration of attributes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "msrp",
    "cmd": "msrp\nno msrp\ndefault msrp",
    "desc": "MSRP enables Multiple Stream Registration Protocol (MSRP), which is a signaling protocol that provides nodes with the ability to reserve network resources to ensure Quality of Service (QoS) between talker and"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "msrp streams load-file",
    "cmd": "msrp streams load-file",
    "desc": "The load-file for MSRP streams provides a file that contains an alias that can be substituted in the name (stream-id) of a string."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show msrp",
    "cmd": "show msrp [ INTERFACE_NAME]",
    "desc": "The show msrp command displays MSRP operational information for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show msrp interfaces",
    "cmd": "show msrp interfaces [INTERFACE_NAME] STATION_TYPE_NAME [STREAMS]",
    "desc": "The show msrp interfaces command displays station stream information for the specified station type, interfaces and streams."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show msrp streams",
    "cmd": "show msrp streams [STREAM_NAME] [INFO_LEVEL]",
    "desc": "The show msrp streams command displays configuration and status information on the specified MSRP streams."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show mvrp",
    "cmd": "show mvrp [INTERFACE_NAME]",
    "desc": "The show mvrp command displays MVRP operational information for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VXLAN Introduction",
    "cmd": "VXLAN Introduction",
    "desc": "Virtual Extensible LAN (VXLAN) is a networking technology that encapsulates MAC-based Layer 2 Ethernet frames within Layer 3 UDP packets to aggregate and tunnel multiple Layer 2 networks across a Layer 3"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VXLAN Description",
    "cmd": "VXLAN Description",
    "desc": "These sections describe VXLAN architecture, the data objects that comprise a VXLAN network, and process of bridging packets through a VXLAN network."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VXLAN Architecture",
    "cmd": "VXLAN Architecture",
    "desc": "The VXLAN architecture extends a Layer 2 network by connecting VLANs from multiple hosts through UDP tunnels called VXLAN segments."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "to 255.255.255.",
    "cmd": "to 255.255.255.",
    "desc": "The network in the figure above has the following assignments: • VTEP IP address of 10."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VXLAN Gateway",
    "cmd": "VXLAN Gateway",
    "desc": "A VXLAN gateway is a service that exchanges VXLAN data and packets with devices connected to different network segments."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VXLAN Processes",
    "cmd": "VXLAN Processes",
    "desc": "When a packet enters a VLAN from a member (ingress) port, the VLAN learns the source address by adding an entry to the MAC address table that associates the source to the ingress-port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "show vxlan vtep",
    "cmd": "show vxlan vtep detail summary type [ecmp | flood | multicast | unicast]",
    "desc": "The show vxlan vtep command displays information about remote VTEPs discovered by the configured VTI and exchanged packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "flood",
    "cmd": "flood",
    "desc": "Virtual Extensible LANs (VXLANs)"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "flood, ECMP",
    "cmd": "flood, ECMP",
    "desc": "Virtual Extensible LANs (VXLANs)"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "multicast",
    "cmd": "multicast",
    "desc": "Total number of remote VTEPS: 4 • Use the following command to display detailed information about the VTEPs exchanging data with the configured VTI: switch# show vxlan vtep detail Remote VTEPs for Vxlan1:"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "control plane control plane",
    "cmd": "control plane control plane",
    "desc": "flood"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "data plane",
    "cmd": "data plane",
    "desc": "datapath flood, ECMP"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "control plane datapath",
    "cmd": "control plane datapath",
    "desc": "multicast Total number of remote VTEPS: 4"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "vxlan flood vtep",
    "cmd": "vxlan [ ACCESS_VNI] flood vtep] MODIFY] VTEP_1 [VTEP_2]...[VTEP_N]\nno vxlan [ACCESS_VNI] flood vtep\ndefault vxlan [ACCESS_VNI] flood vtep",
    "desc": "The vxlan flood vtep command supports VXLAN head-end replication by creating or modifying a list that specifies remote VTEPs to which the switch bridges replicated traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "vxlan multicast-group decap",
    "cmd": "vxlan multicast-group decap group_addr\nno vxlan multicast-group decap\ndefault vxlan multicast-group decap",
    "desc": "The vxlan multicast-group decap command enables VXLAN multicast decapsulation."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "vxlan source-interface",
    "cmd": "vxlan source-interface INT_NAME\nno vxlan source-interface\ndefault vxlan source-interface",
    "desc": "The vxlan source-interface command specifies the interface from which the configuration mode VXLAN Interface (VTI) derives the source address (IP) that it uses when exchanging VXLAN frames."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "vxlan udp-port",
    "cmd": "vxlan udp-port port_id\nno vxlan udp-port\ndefault vxlan udp-port",
    "desc": "The vxlan udp-port command associates a UDP port with the configuration mode VXLAN Interface (VTI)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "vxlan vlan vni",
    "cmd": "vxlan vlan vlan_id vni [vni_id ]\nno vxlan vlan vlan_id vni [vni_id]\ndefault vxlan vlan vlan_id vni [vni_id]",
    "desc": "The vxlan vlan vni command associates a VLAN ID with a virtual network identifier (VNI)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "vxlan vni notation dotted",
    "cmd": "vxlan vni notation dotted\nno vxlan vni notation dotted\ndefault vxlan vni notation dotted",
    "desc": "The vxlan vni notation dotted command configures the switch to display VNIs in dotted decimal notation."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "VXLAN and MLAG",
    "cmd": "interface VXLAN1",
    "desc": "VXLAN over MLAG provides redundancy in hardware VTEPs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VXLAN Configuration",
    "cmd": "VXLAN Configuration",
    "desc": "These sections describe VXLAN configuration tasks: • Configuring the VTI • Head End Replication Configuration • VXLAN Routing Configuration • Configuring VXLAN Routing with Overlay VRFs • Configuring VXLAN over MLAG"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VXLAN Routing Configuration",
    "cmd": "VXLAN Routing Configuration",
    "desc": "• Implementing VXLAN Routing • Configuring Direct VXLAN Routing • Configuring VXLAN VTEP counters • VXLAN Auto Flood-List Construction"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VXLAN Auto Flood-List Construction",
    "cmd": "VXLAN Auto Flood-List Construction",
    "desc": "With the introduction of wireless Access Points (APs), VXLAN flood-lists learned from the data-plane is added to or removed from the flood-lists created in the control-plane."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "VXLAN Decapsulation for interface with multiple VRFs",
    "cmd": "VXLAN Decapsulation for interface with multiple VRFs",
    "desc": "Please refer to the following security advisory after the EOS software upgrade for a network that leverages VXLAN decapsulation on an interface that carries traffic for multiple VRFs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "VXLAN Rules Support for Mirror ACLs Configuration",
    "cmd": "ip access-list miracl",
    "desc": "VXLAN rules support for mirror ACLs configuration permit VXLAN deep inspection rules to be specified in the mirroring ACLs when the switch is operating in normal mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "Static EVPN VXLAN Configuration",
    "cmd": "Static EVPN VXLAN Configuration",
    "desc": "switch(config)# service routing protocols model multi-agent switch(config)# interface Loopback0 switch(config-if-Lo0)# ip address 172."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "VXLAN Bridging and Routing Configuration",
    "cmd": "VXLAN Bridging and Routing Configuration",
    "desc": "switch(config)# interface Loopback0 switch(config-if-Lo0)# ip address 172."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN VXLAN All Active Multi-homing",
    "cmd": "EVPN VXLAN All Active Multi-homing",
    "desc": "Activate Multi-homing in an EVPN environment by assigning an Ethernet segment identifier to the participating Ethernet or Port Channel interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN VXLAN Single-Active Multihoming",
    "cmd": "EVPN VXLAN Single-Active Multihoming",
    "desc": "Multi-homing allows in an EVPN environment by assigning an Ethernet segment identifier or a single Customer Edge (CE) to the participating multiple Provider Edge (PE)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "from 10.0.0.2 (0.0.1.1)",
    "cmd": "from 10.0.0.2 (0.0.1.1)",
    "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, external, best Extended Community: TunnelEncap:tunnelTypeVXLAN EvpnEsImportRt:00:01:00:01:00:01 DF Election: Preference 100 Limitations • Single-active multihoming with MPLS is not supported."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "DYNAMIC",
    "cmd": "DYNAMIC",
    "desc": "Et16 0050.568e.58e9 DYNAMIC Et23 0050.56a0.474a DYNAMIC Et16"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "DYNAMIC",
    "cmd": "show vxlan address-table",
    "desc": "Et5 Total Mac Addresses for this criterion: 8 Moves ----1 Last Move --------0:02:01 ago 0:08:53 ago 0:18:04 ago 12 days, 1:02:44 ago 12 days, 1:02:44 ago 12 days, 0:17:30 ago 12 days, 0:17:30 ago 12 days, 1:02:44 ago"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VXLAN Commands",
    "cmd": "VXLAN Commands",
    "desc": "VXLAN Global Configuration Commands • interface vxlan • ip address virtual • vxlan vni notation dotted VXLAN Interface Configuration Commands • igmp snooping • vxlan flood vtep • vxlan multicast-group decap"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "clear vxlan counters",
    "cmd": "clear vxlan counters ROUTE_TYPE",
    "desc": "The clear vxlan counters command resets the VXLAN counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "designated-forwarder election hold-time",
    "cmd": "designated-forwarder election hold-time sec\nno designated-forwarder election hold-time sec\ndefault designated-forwarder election hold-time sec",
    "desc": "The optional designated-forwarder election hold-time command can configure a wait time before selecting the designated forwarder and allow potential forwarders a chance to advertise their EVPN Ethernet segment (type 4) routes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "igmp snooping",
    "cmd": "igmp snooping\nno igmp snooping",
    "desc": "The igmp snooping command in the VXLAN Configuration Mode configures IGMP Snooping to be aware of VXLAN endpoints."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "interface vxlan",
    "cmd": "interface vxlan vx_range\nno interface vxlan vx_range\ndefault interface vxlan vx_range",
    "desc": "The interface vxlan command places the switch in vxlan-interface configuration mode for modifying the specified VXLAN Tunnel Interface (VTI)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "ip address virtual",
    "cmd": "ip address virtual [ipv4_subnet | secondary]\nno ip address virtual\ndefault ip address virtual",
    "desc": "The ip address virtual command configures a specified address as the primary IPv4 address and as a virtual IP address for the configuration mode VLAN interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "redistribute attached-host",
    "cmd": "redistribute attached-host route-map name\nno redistribute attached-host route-map name\ndefault redistribute attached-host route-map name",
    "desc": "Use the redistribute attached-host to redistribute the source routes in the MRIB via BGP while running multi-agent protocol model for the IPv4 multicast address-family."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show arp",
    "cmd": "total | vrf [word | all]]",
    "desc": "Use the show arp command to display and modify entries in the Address Resolution Protocol (ARP) cache."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show interfaces VXLAN",
    "cmd": "show interfaces VXLAN num",
    "desc": "Use the show interfaces VXLAN command to display the operational status and configuration information of the specified VXLAN."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show service vxlan",
    "cmd": "show service vxlan [status | switch [SWITCH_TYPE] | vni [VNI_INFO]]",
    "desc": "The show service vxlan command displays the status of the VXLAN Control Service (VCS) and the received (from all connected VTEPs) and advertised (to all connected VTEPs) MAC address reachability information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vxlan address-table",
    "cmd": "show vxlan address-table [ENTRY_TYPE] [MAC_ADDR] [VLANS] [REMOTE_VTEP]",
    "desc": "The show vxlan address-table command displays the vxlan address table."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vxlan counters",
    "cmd": "show vxlan counters ROUTE_TYPE",
    "desc": "The show vxlan counters command displays the VXLAN counters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vxlan flood vtep",
    "cmd": "show vxlan flood vtep [VLANS]",
    "desc": "The show vxlan flood vtep command displays the flood list that the switch is using to perform headend replication."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN Overview",
    "cmd": "EVPN Overview",
    "desc": "Ethernet VPN (EVPN) is a standards-based BGP control plane to advertise MAC addresses, MAC and IP bindings and IP Prefixes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN Terminology",
    "cmd": "EVPN Terminology",
    "desc": "The EVPN standard, in the context of an NVO environment, defines the functionality for delivering multitenant Layer 2/3 VPN services using either VXLAN, NVGRE, or MPLS over GRE encapsulation across a common physical IP infrastructure."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN Service Models",
    "cmd": "EVPN Service Models",
    "desc": "An EVPN Instance (EVI), can contain, one or more Layer 2 broadcast domains (VLANs)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "VLAN Based Service Interface",
    "cmd": "VLAN Based Service Interface",
    "desc": "In the VLAN-based service there is a one-to-one mapping between the VLAN-ID and the MAC-VRF of the EVPN instance."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "VLAN Bundle Service Interface",
    "cmd": "VLAN Bundle Service Interface",
    "desc": "In the VLAN bundle service, there is a many-to-one mapping between the VLAN-IDs and the MAC-VRF of the EVPN instance."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "VLAN Aware Bundle Service Interface",
    "cmd": "VLAN Aware Bundle Service Interface",
    "desc": "In the VLAN aware bundle service, there is a many-to-one mapping between the VLAN-IDs and the MACVRF of the EVPN instance."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN MPLS LAYER 3 VPN (Type-5 Route)",
    "cmd": "EVPN MPLS LAYER 3 VPN (Type-5 Route)",
    "desc": "Ethernet VPN (EVPN) is an extension of the BGP protocol introducing a new address family: Layer 2 VPN (address family number 25) / EVPN (subsequent address family number 70)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN VXLAN IPv6 Overlay",
    "cmd": "EVPN VXLAN IPv6 Overlay",
    "desc": "Beginning with EOS Release 4."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "iBGP as PE-CE Protocol for BGP and EVPN L3 VPNs",
    "cmd": "iBGP as PE-CE Protocol for BGP and EVPN L3 VPNs",
    "desc": "EOS supports iBGP as the Provider Edge (PE) - Customer Edge (CE) as an extension to BGP EVPN Layer 3 (L3) VPNs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN Layer 3 Core Operations",
    "cmd": "EVPN Layer 3 Core Operations",
    "desc": "The EVPN standard defines a number of operations and functionality to allow the dynamic learning of MAC and IP bindings, management of MAC moves (VM/host mobility), ARP suppression, automated discovery of"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "ARP Suppression",
    "cmd": "ARP Suppression",
    "desc": "Address Resolution Protocol (ARP) suppression can be supported on the remote VTEPs, providing the option to advertise the MAC and IP binding in the type-2 route."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "IP VPN",
    "cmd": "IP VPN",
    "desc": "RFC 4364 allows Service Providers and Enterprises to use their backbone infrastructure to provide services to multiple customers, or internal departments, while performing the following functions: • Maintaining privacy."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "labels [ 200066 ] from 192.168.58.12 (2.2.2.222)",
    "cmd": "labels [ 200066 ] from 192.168.58.12 (2.2.2.222)",
    "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, external, ECMP head, best, ECMP contributor Local MPLS label: 200066, SR Label Index: 66 3 4 6"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "labels [ 200066 ] from 192.168.59.12 (3.3.3.200)",
    "cmd": "labels [ 200066 ] from 192.168.59.12 (3.3.3.200)",
    "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, external, ECMP, ECMP contributor Not best: ECMP-Fast configured Local MPLS label: 200066, SR Label Index: 66 Advertised to 2 peers:"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN Type-5 Routes: IP Prefix Advertisement",
    "cmd": "EVPN Type-5 Routes: IP Prefix Advertisement",
    "desc": "The EVPN type 2 routes can be used to advertise IP prefixes by making use of the optional IP address and IP address length fields in the route."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "BGP PIC Edge for EVPN VXLAN Routes for Remote VTEP Failures",
    "cmd": "BGP PIC Edge for EVPN VXLAN Routes for Remote VTEP Failures",
    "desc": "When a remote VTEP goes down, the IGP and BGP must recompute a new best path traffic destined to affected BGP prefixes originally reachable by the problematic VTEP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "VXLAN DSCP Mapping",
    "cmd": "VXLAN DSCP Mapping",
    "desc": "VXLAN DSCP Mapping allows the selection of Differentiated Services Code Point DSCP and Traffic Class TC values for packets at VTEPs ( VXLAN Tunnel Endpoint) along VXLAN encapsulation and decapsulation"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN E-Tree for MPLS and VXLAN",
    "cmd": "EVPN E-Tree for MPLS and VXLAN",
    "desc": "As part of an L2 EVPN service, E-Tree assigns the role of root or leaf to each attachment circuit (AC)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN IGP Cost for VTEP Reachability",
    "cmd": "EVPN IGP Cost for VTEP Reachability",
    "desc": "In EVPN deployment with VXLAN underlay when an EVPN type-5 prefix is imported into an IP VRF, the IGP cost of the underlay VTEP reachability is not considered as part of BGP best-path selection post import."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "from 10.0.1.1 (0.0.2.1)",
    "cmd": "from 10.0.1.1 (0.0.2.1)",
    "desc": "Origin INCOMPLETE, metric -, localpref 100, weight 0, valid, external, best Extended Community: Route-Target-AS:64500:20000 TunnelEncap:tunnelTypeVXLAN EvpnRouterMac:00:00:78:03:00:00 VNI: 20000 BGP routing table entry for ip-prefix 20."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "from 10.0.2.1 (0.0.3.1)",
    "cmd": "from 10.0.2.1 (0.0.3.1)",
    "desc": "Origin INCOMPLETE, metric -, localpref 100, weight 0, valid, external, best Extended Community: Route-Target-AS:64500:20000 TunnelEncap:tunnelTypeVXLAN EvpnRouterMac:00:00:78:04:00:00 VNI: 20000"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "from 10.0.2.1 (0.0.3.1), imported EVPN route, RD 11.0.2.1:0",
    "cmd": "from 10.0.2.1 (0.0.3.1), imported EVPN route, RD 11.0.2.1:0",
    "desc": "Origin INCOMPLETE, metric 0, localpref 100, IGP metric 350, weight 0, tag 0 Received 01:11:00 ago, valid, external, ECMP head, ECMP, best, ECMP contributor Extended Community: Route-Target-AS:64500:20000 TunnelEncap:tunnelTypeVXLAN"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "from 10.0.1.1 (0.0.2.1), imported EVPN route, RD 11.0.1.1:0",
    "cmd": "from 10.0.1.1 (0.0.2.1), imported EVPN route, RD 11.0.1.1:0",
    "desc": "Origin INCOMPLETE, metric 0, localpref 100, IGP metric 340, weight 0, tag 0 Received 01:11:00 ago, valid, external, ECMP, ECMP contributor Not best: ECMP-Fast configured Extended Community: Route-Target-AS:64500:20000 TunnelEncap:tunnelTypeVXLAN"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN VXLAN Single-Gateway Centralized Routing",
    "cmd": "EVPN VXLAN Single-Gateway Centralized Routing",
    "desc": "In a traditional EVPN VXLAN centralized anycast gateway deployment, multiple Layer 3 VXLAN Tunnel Endpoints (VTEPs) serve the role of the centralized anycast gateway."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN Multicast VRF Leaking",
    "cmd": "EVPN Multicast VRF Leaking",
    "desc": "Overview EVPN Multicast virtual routing and forwarding (VRF) Leaking forwards multicast traffic from a sender in a tenant or external domain (VRF) to a different domain (VRF) with connected receivers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "Static Inter-VRF Route",
    "cmd": "Static Inter-VRF Route",
    "desc": "The Static Inter-VRF Route feature adds support for static inter-VRF routes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "Show Commands",
    "cmd": "show ip route vrf vrf1",
    "desc": "Use the show ip route vrf to display the egress VRF name if it differs from the source VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "from 10.0.2.1 (0.0.1.1), imported EVPN route, RD 10.255.0.0:20",
    "cmd": "from 10.0.2.1 (0.0.1.1), imported EVPN route, RD 10.255.0.0:20",
    "desc": "Origin IGP, metric 0, localpref 100, IGP metric 0, weight 0, received 00:14:43 ago, valid, external, ECMP head, ECMP, best, ECMP contributor Extended Community: Route-Target-AS:64500:10020 Route-Target-AS:64500:20000"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "from 10.0.2.1 (0.0.1.1), imported EVPN route, RD 10.255.0.1:20",
    "cmd": "from 10.0.2.1 (0.0.1.1), imported EVPN route, RD 10.255.0.1:20",
    "desc": "Origin IGP, metric 0, localpref 100, IGP metric 0, weight 0, received 00:14:43 ago, valid, external, ECMP, ECMP contributor Extended Community: Route-Target-AS:64500:10020 Route-Target-AS:64500:20000 TunnelEncap:tunnelTypeVXLAN EvpnMacMobility:1 Evpn…"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "from 10.0.0.1 (0.0.1.1)",
    "cmd": "from 10.0.0.1 (0.0.1.1)",
    "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, internal, best Extended Community: Route-Target-AS:10:1 TunnelEncap:tunnelTypeVXLAN VNI: 10 PMSI Tunnel: PIM-SSM Tree, MPLS Label: 10, Leaf Information Required: false,"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "Flood Traffic Filtering with EVPN",
    "cmd": "Flood Traffic Filtering with EVPN",
    "desc": "The VXLAN fabric managed by EVPN does not always flood with broadcast, multicast, or unknown MAC traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "from 2.2.2.222 (2.2.2.222)",
    "cmd": "from 2.2.2.222 (2.2.2.222)",
    "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, internal, best Extended Community: Route-Target-AS:64512:11 TunnelEncap:tunnelTypeMpls MPLS label: 958810 BGP routing table entry for ip-prefix 100."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show e-tree vlan",
    "cmd": "show e-tree vlan",
    "desc": "The show e-tree vlan command displays configuration information about E-Tree on VLANs."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ip bgp vrf",
    "cmd": "show ip bgp vrf [vrf_name | all | default]",
    "desc": "The show ip bgp vrf command displays the type of VPN from the imported route."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "from 4.0.0.3 (52.0.0.1), imported EVPN route, RD 400:1",
    "cmd": "from 4.0.0.3 (52.0.0.1), imported EVPN route, RD 400:1",
    "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, external,best Extended Community: Route-Target-AS:4000:1 TunnelEncap:tunnelTypeVXLAN EvpnRouterMac:74:83:ef:0b:70:f3 Leaked from VRF vrf-red"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ip route vrf",
    "cmd": "show ip route vrf [vrf_name | all]",
    "desc": "The show ip route vrf command displays leaked prefixes with the label L in the output that indicates that the IPv4 route has been leaked."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show ipv6 bgp vrf",
    "cmd": "show ipv6 bgp vrf [vrf_name | all | default]",
    "desc": "The show ipv6 bgp vrf command displays the type of VPN from the imported route."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Static",
    "title": "show ipv6 route vrf",
    "cmd": "show ipv6 route vrf [vrf_name | all]",
    "desc": "The show ipv6 route vrf command displays leaked prefixes with the label L in the output that indicates that the IPv6 route has been leaked."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show l2rib input all",
    "cmd": "show l2rib input all",
    "desc": "Use the show l2rib input all command to display the Layer 2 RIB input tables migration process."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show l2Rib input VXLAN-control-service",
    "cmd": "show l2Rib input VXLAN-control-service",
    "desc": "Use the show l2Rib input VXLAN-control-service to display the migration processes for the VXLAN control service."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show l2rib output",
    "cmd": "show l2rib output",
    "desc": "Use the show l2rib output command to display the the Layer 2 RIB utput tables migration process."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show service VXLAN address-table",
    "cmd": "show service VXLAN address-table {advertised | received}[address H.H.H | evpn | hsc | mss |\nswitch [Word | all] | vni vnid | vtep A.B.C.D]",
    "desc": "The show service VXLAN address-table command displays route entries in the MAC forwarding table that are added through the CVX."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN MPLS Virtual Private Wire Service (VPWS)",
    "cmd": "interface ethernet 3/1",
    "desc": "Traffic to/from a given Attachment Circuit (AC) without any MAC lookup/learning can be forwarded using EVPN MPLS VPWS, which uses BGP for signalling."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN VXLAN IRB Sample Configuration",
    "cmd": "EVPN VXLAN IRB Sample Configuration",
    "desc": "In the following topology, we are connecting a Layer 2 site with a Layer 3 site using Layer 3 EVPN (type-5 route)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "MLAG Configuration: Leaf-11 and Leaf-12",
    "cmd": "MLAG Configuration: Leaf-11 and Leaf-12",
    "desc": "Leaf-11 MLAG Configuration switch(config)# spanning-tree mode mstp switch(config)# no spanning-tree vlan-id 4093-4094 !"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "MLAG Configuration: Leaf-21 and Leaf-22",
    "cmd": "MLAG Configuration: Leaf-21 and Leaf-22",
    "desc": "Leaf-21 MLAG Configuration switch(config)# spanning-tree mode mstp switch(config)# no spanning-tree vlan-id 4093-4094 !"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "VLAN and Distributed IP Address Configuration: Leaf-11 and Leaf-21",
    "cmd": "VLAN and Distributed IP Address Configuration: Leaf-11 and Leaf-21",
    "desc": "VLAN and interface configuration for VLAN 10 (virtual IP address 10."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "VXLAN Interface Configuration: Leaf-11 and Leaf-21",
    "cmd": "VXLAN Interface Configuration: Leaf-11 and Leaf-21",
    "desc": "The tenants’ VLANs are mapped to unique overlay VXLAN VNIs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "eBGP Underlay Configuration on the Leaf Switches",
    "cmd": "eBGP Underlay Configuration on the Leaf Switches",
    "desc": "The leaf switches for the underlay network peer with each spine on the physical interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN BGP Configuration on the Spine Switches",
    "cmd": "EVPN BGP Configuration on the Spine Switches",
    "desc": "The EVPN BGP configuration on two of the spine switches is summarized below."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "eBGP Overlay on Leaf Switches",
    "cmd": "eBGP Overlay on Leaf Switches",
    "desc": "The MAC VRFs and IP VRF for the tenants’ subnets are created in the BGP router context with unique RouteDistinguishers (RD) and Route-Targets (RT) attached to each MAC-VRF and IP-VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "eBGP Overlay on Spine Switches",
    "cmd": "eBGP Overlay on Spine Switches",
    "desc": "The EVPN BGP configuration on the spine switches is summarised in the following examples."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN MPLS Sample Configuration",
    "cmd": "EVPN MPLS Sample Configuration",
    "desc": "This section describes configuring and verifying BGP VPN, which has steps similar to the EVPN VXLAN demonstration."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "IP VPNs Sample Configuration",
    "cmd": "IP VPNs Sample Configuration",
    "desc": "Here, we examine BGP EVPN layer 3 VPN over an LDP, ISIS-SR, and BGP-SR transport LSPs."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "IP VPN over ISIS-SR",
    "cmd": "IP VPN over ISIS-SR",
    "desc": "The following figure illustrates an overview of the combined control and data planes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "IP VPNs Over LDP",
    "cmd": "IP VPNs Over LDP",
    "desc": "The following figures illustrate an overview of the combined control and data planes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "IP VPNs Over BGP-SR",
    "cmd": "IP VPNs Over BGP-SR",
    "desc": "The following figures illustrate an overview of the combined control and data planes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN and VCS Commands",
    "cmd": "EVPN and VCS Commands",
    "desc": "Global Configuration Mode • router general Router BGP Configuration Mode • next-hop resolution disabled • redistribute service vxlan • route-target • route-target export • route-target import • route-target route-map"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "bfd vtep evpn",
    "cmd": "bfd vtep evpn interval interval-milliseconds min-rx min-rx-milliseconds multiplier multiplier-range\nno bfd vtep evpn interval interval-milliseconds min-rx min-rx-milliseconds multiplier multiplier-range",
    "desc": "The bfd vtep evpn command to configure the BGP PIC Edge for EVPN VXLAN routes for remote VTEPs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "encapsulation VXLAN layer-3 set next-hop igp-cost",
    "cmd": "encapsulation VXLAN layer-3 set next-hop igp-cost\nno encapsulation VXLAN layer-3 set next-hop igp-cost\ndefault encapsulation VXLAN layer-3 set next-hop igp-cost",
    "desc": "The encapsulation VXLAN layer-3 set next-hop igp-cost command configures the underlay IGP metric for the VTEP reachability to be considered for BGP best path selection in the IP VRF that is importing the EVPN route."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "e-tree",
    "cmd": "vlan 100",
    "desc": "The vlan e-tree places the switch in VLAN configuration mode and allows configuration of E-Tree."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "ip hardware fib vxlan",
    "cmd": "ip hardware fib vxlan",
    "desc": "Ethernet23/1"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "leak routes",
    "cmd": "leak routes source-vrf source_name subscribe-policy route_map\nno leak routes source-vrf source_name\ndefault leak routes source-vrf source_name",
    "desc": "The leak routes command configures an inter-VRF route-leaking policy to allow routes to be leaked from one VRF to another using a route map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "next-hop resolution disabled",
    "cmd": "next-hop resolution disabled",
    "desc": "The next-hop resolution disabled command disables the next-hop resolution in routes received from BGP-EVPN peers."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "redistribute bgp evpn VXLAN",
    "cmd": "redistribute bgp evpn VXLAN",
    "desc": "The redistribute bgp evpn VXLAN command enables BGP-EVPN routes to be redistributed to VCS, which in turn advertises them to all VTEPs within the DC."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "redistribute router-mac next-hop vtep primary",
    "cmd": "redistribute router-mac next-hop vtep primary [router-mac | next-hop | vtep | primary]",
    "desc": "Use the redistribute router-mac next-hop vtep primary command in the MAC VRF configuration mode to advertise an EVPN type-2 route for the VARP MAC with a nexthop of the primary VTEP IP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "redistribute service VXLAN",
    "cmd": "redistribute service VXLAN",
    "desc": "The redistribute service VXLAN command enables BGP to redistribute the Layer 2 bridging information received from VCS."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "remote leaf host drop",
    "cmd": "remote leaf host drop",
    "desc": "The remote leaf host drop command allows the configuration of per-VLAN explicit drop routes for ETree."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "route-target",
    "cmd": "router bgp 100",
    "desc": "The route-target command configures a well-known extended community that is used by BGP-EVPN to export routes from or import routes into MAC-VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "route-target export",
    "cmd": "service routing protocols model multi-agent",
    "desc": "The route-target export command allows you to export routes from a VRF to the local VPN table using the route target extended community list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "route-target import",
    "cmd": "route-target import [evpn | vpn-ipv4 | vpn-ipv6] RT any-as:value\nno route-target import\ndefault route-target import",
    "desc": "The route-target import command allows you to import route-target extended community lists from the local VPN table to the target VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "route-target route-map",
    "cmd": "route-target [import | export][evpn | vpn-ipv4 | vpn-ipv6] route-map RM\nno route-target route-map\ndefault route-target route-map",
    "desc": "The route-target route-map command allows you to export and import route target extended community lists from one VRF to another using route maps."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "router general",
    "cmd": "router general\nno router general\ndefault router general",
    "desc": "The router general command places the switch in Router-General Configuration Mode for the configuration of protocol-independent routing."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "router multicast vrf leak",
    "cmd": "router multicast vrf vrf-receiver-epvn leak group [prefix-list prefix-list-name][vrf vrf-name]",
    "desc": "The router multicast command places the switch in router multicast configuration mode to configure virtual routing and forwarding multicast traffic."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "show bgp evpn",
    "cmd": "show bgp evpn vni 3011",
    "desc": "The show bgp evpn command displays information about the BGP-EVPN routes of the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show vrf leak flapping",
    "cmd": "show vrf leak flapping",
    "desc": "The show vrf leak flapping command displays the flapping prefixes of the routes leaked from one VRF to another VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show VXLAN control-plane",
    "cmd": "show VXLAN control-plane",
    "desc": "To enable the user to quickly view which control planes and sources are importing reachability information into which VLANs, use the following show command: • export Restricts output to VLANs exporting to a control plane."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "vlan (VLAN-AWARE-Bundle configuration mode)",
    "cmd": "vlan [add | remove] range",
    "desc": "The vlan add/ remove command configures the VLAN range string in a VLAN-AWARE-BUNDLE."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "vni-aware-bundle",
    "cmd": "vni-aware-bundle vni_bundle_name",
    "desc": "The vni-aware-bundle command configures a BGP MAC-VRF containing Layer 2 routes from a group of VXLAN Network Identifiers (VNI)."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "MPLS",
    "cmd": "MPLS",
    "desc": "These sections describe the Arista MPLS implementation: • Configuring MPLS"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "MPLS Overview",
    "cmd": "MPLS Overview",
    "desc": "Multiprotocol Label Switching (MPLS) provides a networking process that replaces complete network addresses with short path labels for directing data packets to network nodes."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "MPLS Implementation",
    "cmd": "MPLS Implementation",
    "desc": "MPLS static rule parameters contain the following information: • A 20-bit value compared to the top header label of each MPLS packet."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "LSP Ping/Traceroute for MPLS Nexthop Group Tunnels",
    "cmd": "LSP Ping/Traceroute for MPLS Nexthop Group Tunnels",
    "desc": "The ping/traceroute mpls tunnel nexthop-group command checks the liveness of Nexthop Group tunnel endpoint for an MPLS Nexthop Group."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "LDP Hello Redundancy",
    "cmd": "LDP Hello Redundancy",
    "desc": "LDP Hello Redundancy establishes a redundant target Hello adjacency for each neighbor discovered through the Basic Discovery Mechanism using the LDP Extended Discovery mechanism."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "LDP Pseudowire Show Commands",
    "cmd": "show patch panel",
    "desc": "Use the show patch panel command to display the overall status of the configured pseudowire patches."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN MPLS Shared ESI Label",
    "cmd": "EVPN MPLS Shared ESI Label",
    "desc": "In a multihomed EVPN MPLS configuration, broadcast, unknown-unicast, and multicast (BUM) packets sent from a Non-Designated Forwarder (Non-DF) PE to a Designated Forwarder (DF) PE must carry the ESI label"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "LDP Graceful Restart",
    "cmd": "LDP Graceful Restart",
    "desc": "Label Distribution Protocol (LDP) Graceful Restart allows devices to preserve MPLS LDP LFIB entries in the forwarding plane during the loss of a TCP connection or the LDP agent restarts."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "LDP Pseudowire",
    "cmd": "LDP Pseudowire",
    "desc": "LDP pseudowire provides support for emulating Ethernet connections over a Multiprotocol Label Switching (MPLS) network, and controlled using the extension of the MPLS Label Distribution Protocol (LDP)."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "MPLS Commands",
    "cmd": "MPLS Commands",
    "desc": "MPLS Commands • MPLS Commands • entropy-label • mpls icmp source-interface • mpls ip • mpls parsing speculative • mpls shared index • mpls static • mpls static vrf-label • mpls tunnel termination • mpls tunnel termination (vrf qos map)"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "authentication",
    "cmd": "authentication [index 1-4294967295 [active | password ]|[sequence-number window 1-255]|[type [md5 |\nno authentication [index 1-4294967295 [active | password ]|[sequence-number window 1-255]|[type\ndefault authentication [index 1-4294967295 [active | password ]|[sequence-number window 1-255]|",
    "desc": "Use the authentication command to enable cryptographic authentication."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "cspf delay",
    "cmd": "cspf delay [initial n back-off n] max n\nno cspf delay [initial n back-off n] max n\ndefault cspf delay [initial n back-off n] max n",
    "desc": "RSVP-TE uses CSPF to compute the FRR backup path."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "entropy-label",
    "cmd": "entropy-label\nno entropy-label",
    "desc": "The entropy-label command enables the MPLS LDP Entropy Label."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "fast-reroute",
    "cmd": "fast-reroute [mode [ link-protection | node-protection | none]|[reversion [global | local]]",
    "desc": "Use the fast-reroute command to support Fast Reroute (FRR) link protection/NHOP (RFC 4090)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "fast-reroute reversion",
    "cmd": "fast-reroute reversion [global | local]",
    "desc": "You can change the revertive behavior of the FRR from the global revertive mode to the local revertive mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "graceful-restart",
    "cmd": "graceful-restart [role [helper | speaker]] [timer [recovery | restart]] [maximum timer_value]",
    "desc": "The graceful-restart command configures Graceful Restart for RSVP which preserves data plane traffic when RSVP agents restart."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "hello interval",
    "cmd": "hello interval [interval [sec]] [multiplier [num]]\nno hello interval [interval [sec]][multiplier [num]]\ndefault hello interval [interval [sec]][multiplier [num]]",
    "desc": "The hello interval command sets the time between the hello packets."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "mpls ldp graceful-restart",
    "cmd": "graceful-restart role [[helper [ timer [ neighbor-liveness seconds] [ recovery",
    "desc": "The ldp graceful-restart command enables MPLS LDP (Label Distribution Protocol) Graceful Restart (GR) functionality."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "mpls icmp source-interface",
    "cmd": "mpls icmp [fragmentation-needed | ip | ipv6 ttl-exceeded]\nno mpls icmp [fragmentation-needed | ip | ipv6 ttl-exceeded]",
    "desc": "The mpls icmp source-interface command permits the designation of a source interface as an IPv4 address or IPv6 address."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "mpls ip",
    "cmd": "mpls ip\nno mpls ip\ndefault mpls ip",
    "desc": "The mpls ip command enables MPLS routing."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "mpls parsing speculative",
    "cmd": "mpls parsing speculative [control-word | ethernet | ipv4 | ipv6]",
    "desc": "Use the mpls parsing speculative command to configure parsing additional header types used by the load-balancing hash algorithm."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "mpls shared index",
    "cmd": "mpls shared index index-value\nno mpls shared index index-value",
    "desc": "The mpls shared index command configures an Ethernet-Segment (ES) shared-index to allocate an ESI label value based on the shared-index configuration."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "mpls static",
    "cmd": "mpls tunnel static top-label top_tag[ bgp peer [peer IP]] [DEST_INTF] NEXTHOP_ADDR ACTION\nno mpls tunnel static top-label top_tag\nno mpls tunnel static top-label top_tag [DEST_INTF] NEXTHOP_ADDR ACTION [PRIORITY]\ndefault mpls tunnel static top-label top_tag\ndefault mpls tunnel static top-label top_tag [DEST_INTF] NEXTHOP_ADDR ACTION",
    "desc": "The mpls static command creates an MPLS rule that specifies the method of handling of inbound MPLS traffic."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "mpls static vrf-label",
    "cmd": "mpls static vrf-label mpls-label [vrf vrf-name]\nno mpls static vrf-label mpls-label [vrf vrf-name]\ndefault mpls static vrf-label mpls-label [vrf vrf-name]",
    "desc": "Use the mpls static vrf-label command to configure a static VRF label route."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "mpls tunnel termination",
    "cmd": "mpls tunnel termination [ model [php model][ttl [[pipe | uniform] dscp]| pipe | uniform]\nno mpls tunnel termination [model [php model][ttl [[pipe | uniform] dscp]| pipe | uniform]\ndefault mpls tunnel termination [model [php model][ttl [[pipe | uniform] dscp]| pipe | uniform]",
    "desc": "• model Tunnel termination TTL and DSCP model."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "mpls tunnel termination (vrf qos map)",
    "cmd": "mpls tunnel termination\nvrf",
    "desc": "The mpls tunnel termination (vrf qos map) command changes configuration mode to allow the attachment of DSCP-to-traffic-class maps to specific VRFs."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "mpls tunnel static",
    "cmd": "mpls tunnel static tunnel-name tunnel-endpoint Null0",
    "desc": "The mpls tunnel static command in the Global Configuration Mode prevents installing a backup path for Destination-based Remote Triggered Black Hole used to prevent DoS attacks on a target network by dropping traffic destined for the target."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "neighbor",
    "cmd": "neighbor ip_address [authentication index password_index active] [targeted]\nno neighbor ip_address",
    "desc": "The neighbor ip_address command in the MPLS LDP Configuration Mode configures an IP address for an LDP neighbor for authentication or as a targeted peer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "neighbor end-of-lib",
    "cmd": "neighbor end-of-lib\nno neighbor end-of-lib\ndefault neighbor end-of-lib",
    "desc": "The neighbor end-of-lib command in the MPLS LDP Configuration Mode allows an LDP speaker to notify a neighbor after completion of advertising all labels from the Label Information Base (LIB)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "neighbor hello-redundancy",
    "cmd": "neighbor hello-redundancy [duration [infinite | seconds] none]\nno neighbor hello-redundancy\nneighbor hello-redundancy none",
    "desc": "The neighbor hello-redundancy command in the MPLS LDP Configuration Mode configures an LDP neighbor to send LDP Hellos on a primary interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "ping mpls rsvp session",
    "cmd": "ping mpls rsvp session id 1 lsp 1 repeat 3",
    "desc": "LSP Ping allows the user to check if the remote endpoint of an RSVP session is reachable through the LSP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "preemption method",
    "cmd": "preemption method [hard | soft ] timer t\nno preemption method [hard | soft ] timer t\ndefault preemption method [hard | soft ] timer t",
    "desc": "The preemption method command enables deferred failure of RSVP-TE LSPs on link oversubscription."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "refresh method",
    "cmd": "refresh method [bundled | explicit ]",
    "desc": "Using the refresh method command with the bundled keyword enables the Refresh Overhead Reduction that supports the sending of message IDs and refreshing state with refresh messages."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show mpls parsing speculative",
    "cmd": "show mpls parsing speculative",
    "desc": "The show mpls parsing speculative command displays information about the MPLS Speculative Parsing configuration."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show mpls route summary",
    "cmd": "show mpls route summary",
    "desc": "The show mpls route summary command displays statistics about the configuration and implementation of MPLS rules."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show mpls route",
    "cmd": "show mpls [INFO_LEVEL] route [header_label]",
    "desc": "The show mpls config route command displays the switch’s MPLS static rule configuration for the specified routes and rules."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "apply",
    "cmd": "apply",
    "desc": "up pop ipv4"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "EVPN MPLS Shared ESI Label Show Commands",
    "cmd": "show bgp evpn instance",
    "desc": "The following show command displays the operational state when EVPN MPLS shares the ESI label between all the PEs in that Ethernet-Segment:"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "LDP Entropy Label",
    "cmd": "LDP Entropy Label",
    "desc": "If a network device uses deep packet inspection for load balancing, Arista Networks recommends to use entropy label in LDP to improve load balancing in MPLS networks by providing sufficient entropy in the"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show mpls tunnel termination qos maps",
    "cmd": "show mpls tunnel termination qos maps [ vrf vrf_name ]",
    "desc": "The show mpls tunnel termination qos maps command shows the DSCP to TC map associated with each VRF, or with a specified VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show traffic-engineering cspf path",
    "cmd": "show traffic-engineering cspf path [destination-IP]detail]",
    "desc": "Use the show traffic-engineering cspf path command to display all the paths counted by CSPF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show traffic-engineering database",
    "cmd": "show traffic-engineering database",
    "desc": "Use the show traffic-engineering database to display the topology used for CSPF computations."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "srlg",
    "cmd": "srlg strict\nno srlg strict\ndefault srlg strict",
    "desc": "The srlg command specifies if link SRLGs of a primary LSP are to be considered as constraints while creating a fast-reroute bypass tunnel with either link or node protection."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "vrf (MPLS tunnel termination)",
    "cmd": "vrf vrf_name",
    "desc": "The vrf (MPLS tunnel termination) command places the switch in MPLS Tunnel Termination VRF Configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "LDP over RSVP",
    "cmd": "LDP over RSVP",
    "desc": "LSPs formed by LDP normally follow IGP routing."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "Class Based Forwarding for MPLS Labeled Packets",
    "cmd": "Class Based Forwarding for MPLS Labeled Packets",
    "desc": "Class Based Forwarding (CBF) provides a means for forwarding traffic through selected tunnels based on the traffic class of the incoming packet."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "administrative-group",
    "cmd": "administrative-group [ include any <RANGE>] | [include all <RANGE>] | [exclude\ndefault administrative-group\nno administrative-group",
    "desc": "The administrative-group command specifies the inclusion or exclusion of links that are part of an administrative group."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "alias endpoint",
    "cmd": "alias endpoint [ ipv4_address | ipv6_address]\nno alias endpoint\ndefault alias endpoint",
    "desc": "The alias endpoint command configures a tunnel endpoint alias for both IPv4 and IPv6 endpoints and allows the additional next-hops to resolve using the existing tunnel."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "authentication index",
    "cmd": "authentication index <num> password<WORD>",
    "desc": "The authentication index command configures the MPLS RSVP cryptographic authentication password globally for outgoing messages to the specified neighbor."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "authentication sequence-number window",
    "cmd": "authentication sequence-number window size_num\nno authentication sequence-number window\ndefault authentication sequence-number window",
    "desc": "The authentication sequence-number window command configures the size of the sequence number reorder window for incoming MPLS RSVP messages."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "authentication type",
    "cmd": "authentication type {md5 | none}\nno authentication type {md5 | none}\ndefault authentication type {md5 | none}",
    "desc": "The authentication type command configures the MPLS RSVP cryptographic authentication type globally."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "bandwidth",
    "cmd": "bandwidth 0-1000 (bps | kbps | mbps | gbps)\nadjustment-period seconds]\nbandwidth signaling [ disabled ]\nno bandwidth 0-1000 (bps | kbps | mbps | gbps)\ndefault bandwidth 0-1000 (bps | kbps | mbps | gbps)\nno bandwidth auto\ndefault bandwidth auto\nno bandwidth signaling\ndefault bandwidth signaling",
    "desc": "The bandwidth command configures the reserve bandwidth within the tunnel."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "clear mpls rsvp counters",
    "cmd": "clear mpls rsvp counters\nclear mpls rsvp counters ( ip | ipv6 ) access-list",
    "desc": "The clear mpls rsvp counters command clears RSVP message counters."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "clear mpls rsvp session",
    "cmd": "clear mpls rsvp session ( <filters> | all ) [ detail ]",
    "desc": "The clear mpls rsvp session command can be used to clear RSVP sessions."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "color",
    "cmd": "default color - would inherit the color from the profile if one is configured\nno color\ncolor disabled - explicitly disables the color configuration irrespective of a profile being configured",
    "desc": "The color command assigns a color to a tunnel to publish the tunnel to the system-colored-tunnelrib, to help steer traffic into the tunnel."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "cspf delay",
    "cmd": "cspf delay [initial n back-off n] max n\nno cspf delay\ndefault cspf delay",
    "desc": "RSVP-TE uses CSPF to compute the FRR backup path."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "cspf ecmp tie-break",
    "cmd": "cspf ecmp tie-break (least-fill|random)\nno cspf ecmp tie-break\ndefault cspf ecmp tie-break",
    "desc": "The cspf ecmp tie-break command disables bandwidth least-fill when the random option is selected, and enables bandwidth least-fill when least-fill is selected."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "destination ip",
    "cmd": "destination ip IP_address\nno destination ip\ndefault destination ip",
    "desc": "Each tunnel requires a destination IP to function."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "fast-reroute bypass tunnel optimization interval",
    "cmd": "fast-reroute bypass tunnel optimization interval < number of seconds > seconds\nno fast-reroute bypass tunnel optimization interval\ndefault fast-reroute bypass tunnel optimization interval",
    "desc": "The fast-reroute bypass tunnel optimization interval command configures the interval at which paths used for bypass tunnels are re-optimized."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "fast-reroute mode (RSVP tunnel)",
    "cmd": "fast-reroute mode ( link-protection | node-protection | none }\nno fast-reroute mode\ndefault fast-reroute mode",
    "desc": "The fast-reroute mode command by default, RSVP tunnels inherit fast-reroute settings from the global RSVP configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "fast-reroute mode",
    "cmd": "fast-reroute mode (link-protection | node-protection | none)\nno fast-reroute mode\ndefault fast-reroute mode",
    "desc": "The fast-reroute mode command configures fast-reroute (FRR) (RFC 4090)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "fast-reroute reversion",
    "cmd": "fast-reroute reversion (global | local)\ndefault fast-reroute reversion\nno fast-reroute reversion",
    "desc": "You can change the revertive behavior of the FRR from the global revertive mode to the local revertive mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "graceful-restart role",
    "cmd": "graceful-restart role (helper | speaker)\nno graceful-restart role (helper | speaker)\ndefault graceful-restart role (helper | speaker)\ntimer restart maximum <t> seconds - The maximum accepted restart time value is configurable\nunder helper configuration mode.\ndefault timer restart maximum\nno timer restart maximum\ntimer recovery maximum <t> seconds - The maximum accepted recovery time value, configured\nunder helper configuration mode.\ndefault timer recovery maximum\nno timer recovery maximum\ntimer restart <t> seconds - The restart time value is configurable under the speaker\nconfiguration mode.\ndefault timer restart\nno timer restart\ntimer recovery <t> seconds - The recovery time value is configurable under the speaker\nconfiguration mode.\ndefault timer recovery\nno timer recovery",
    "desc": "The graceful-restart role command enables a graceful-restart role for RSVP (helper or speaker) and enters the configuration mode for that role."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "hello interval",
    "cmd": "hello interval <sec> multiplier <num>\nno hello interval\ndefault hello interval",
    "desc": "The hello interval command sets the time between the hello packets."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "hardware next-hop fast-failover",
    "cmd": "hardware next-hop fast-failover\nno hardware next-hop fast-failover\ndefault hardware next-hop fast-failover",
    "desc": "The hardware next-hop fast-failover command enables hardware-accelerated next-hop failover on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "hello-redundancy",
    "cmd": "neighbor hello-redundancy [duration seconds]\ndefault neighbor hello-redundancy\nno neighbor hello-redundancy",
    "desc": "The hello-redundancy command is suggested for Hello Redundancy when used with LDP over RSVP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "hitless-restart",
    "cmd": "hitless-restart\nno hitless-restart\ndefault hitless-restart\ntimer recovery maximum <t> seconds - The maximum accepted recovery time value, configured\nunder hitless-restart configuration mode.\ndefault timer recovery maximum\nno timer recovery maximum\ndefault timer recovery\nno timer recovery",
    "desc": "The hitless-restart command enables RSVP hitless restart."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "hop (dynamic path)",
    "cmd": "hop <IPv4_address> [ [exclude] | [loose] [ [before <IPv4_address> | after <IPv4_address>] ] ]\ndefault hop <IPv4_address> - If no address is supplied then all hops are removed.\nno hop [<IPv4_address>] - If no address is supplied then all hops are removed.",
    "desc": "The hop command adds a hop to the configuration-mode dynamic path."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "hop (explicit path)",
    "cmd": "hop <IPv4_address> [before IPv4_address | after <IPv4_address>]\ndefault hop [ <IPv4_address>] - If no address is supplied then all hops are removed.\nno hop [<IPv4_address>] - If no address is supplied then all hops are removed.",
    "desc": "The hop command adds a hop to the configuration-mode explicit path."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "label local-termination",
    "cmd": "label local-termination (explicit-null | implicit-null)\nno label local-termination\ndefault label local-termination",
    "desc": "The label local-termination command enables an egress LSR to advertise an IPv4 explicit-null label (Label 0) to its upstream router by using the explicit-null option."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "igp shortcut",
    "cmd": "igp shortcut\ndefault igp shortcut\nno igp shortcut",
    "desc": "The igp shortcut command is used to specify whether a RSVP tunnel should participate in Interior Gateway Protocol (IGP) shortcuts."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "local-interface",
    "cmd": "local-interface int_type int_num\nno local-interface\ndefault local-interface",
    "desc": "The local-interface command specifies a local interface from which to derive the source IP address for RSVP-TE tunnels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "lsp no-path preservation timer",
    "cmd": "lsp no-path preservation timer seconds seconds\nno lsp no-path preservation timer\ndefault lsp no-path preservation timer",
    "desc": "The preservation timer command in the Traffic-Engineering RSVP Configuration Mode configures a timer to control how long the switch maintains an original Label Switched Path (LSP) if a Make-Before-Break"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "lsp self-ping",
    "cmd": "lsp self-ping\ndefault lsp self-ping\nno lsp self-ping",
    "desc": "The lsp self-ping command enables LSP self-ping (RFC 7746)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "metric",
    "cmd": "default metric\nno metric",
    "desc": "The metric command configures a per RSVP tunnel metric to allow specific tunnels to a tunnel endpoint take precedence over other tunnels to the same tunnel endpoint when forming ECMP."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "mpls rsvp",
    "cmd": "mpls rsvp\ndefault mpls rsvp - Will wipe the configuration in the mode and disable RSVP.\nno mpls rsvp - Will wipe the configuration in the mode and disable RSVP.",
    "desc": "The mpls rsvp command places the switch in MPLS RSVP configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "mtu signaling",
    "cmd": "mtu signaling\nno mtu signaling\ndefault mtu signaling",
    "desc": "The mtu signaling command configures RSVP to enable MTU discovery."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "neighbor authentication index",
    "cmd": "neighbor neighbor_address authentication index index_num active\nno neighbor neighbor_address authentication index index_num active\ndefault neighbor neighbor_address authentication index index_num active",
    "desc": "The neighbor authentication index command configures the MPLS RSVP cryptographic authentication password for outgoing messages to the specified neighbor."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "neighbor authentication type",
    "cmd": "neighbor neighbor_address authentication type (md5 | none)\nno neighbor neighbor_address authentication type\ndefault neighbor neighbor_address authentication type",
    "desc": "The neighbor authentication type command configures the MPLS RSVP cryptographic authentication type for the specified neighbor."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "optimization interval",
    "cmd": "optimization interval <numerical value> seconds\ndefault optimization\nno optimization",
    "desc": "Periodic tunnel optimization can be configured globally or individually for a specific tunnel using the optimization interval command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "p2mp",
    "cmd": "p2mp\ndefault p2mp\nno p2mp",
    "desc": "From the config-mpls-rsvp configuration mode, the p2mp command places the switch in mpls-rsvpp2mp configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "path (path specification)",
    "cmd": "path spec_name (dynamic | explicit)\nno path spec_name\ndefault path spec_name",
    "desc": "The path command in Traffic Engineering RSVP Tunnel P2P configuration mode specifies the configuration mode for the path."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "path (RSVP tunnel)",
    "cmd": "path spec_name (secondary pre-signaled)\nno path spec_name (secondary)\ndefault path spec_name(secondary)",
    "desc": "The path command in Traffic Engineering RSVP Tunnel configuration mode specifies a primary or secondary path along which the LSPs are established for the configuration-mode RSVP tunnel."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "ping mpls rsvp session",
    "cmd": "ping mpls rsvp session ([id num [lsp lspId ] | name word)] [pad-reply] [repeat <num_repeat>",
    "desc": "The ping mpls rsvp session command allows the user to check if the remote endpoint of an RSVP session is reachable through the LSP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "preemption method",
    "cmd": "preemption method (hard | soft ) [timer <seconds>]\nno preemption method\ndefault preemption method",
    "desc": "The preemption method command enables deferred failure of RSVP-TE LSPs on link oversubscription."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "priority",
    "cmd": "priority 0-7\nsetup 7 hold 0\ndefault priority",
    "desc": "The priority command configures the tunnel priority."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "refresh interval",
    "cmd": "refresh interval seconds\nno refresh interval\ndefault refresh interval",
    "desc": "The refresh interval command configures the interval at which MPLS RSVP Path and Resv messages are sent to refresh the state."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "refresh method",
    "cmd": "no Srefresh method - More tokens allowed but ignored.\ndefault Srefresh method - More tokens allowed but ignored.",
    "desc": "Using the Srefresh method command with the bundled keyword enables the Refresh Overhead Reduction that supports the sending of message IDs and refreshing state with refresh messages."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "refresh rsvp tunnel optimization",
    "cmd": "refresh rsvp tunnel optimization (all | name tunnel_name [avoid ecmp hop ecmp_hops] )",
    "desc": "When periodic tunnel optimization is not configured, tunnels will not re-optimize automatically, but they can be optimized on demand by using the refresh rsvp tunnel optimization command."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "router traffic-engineering – not an RSVP command",
    "cmd": "router traffic-engineering",
    "desc": "The router traffic-engineeing command places the switch in Traffic Engineering configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "rsvp",
    "cmd": "rsvp\ndefault rsvp\nno rsvp",
    "desc": "The rsvp command places the switch in Traffic Engineering RSVP configuration mode."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "rsvp bypass administrative-group",
    "cmd": "rsvp bypass administrative-group [ include any <RANGE>] | [include all <RANGE>] |\nno rsvp bypass administrative-group\ndefault rsvp bypass administrative-group",
    "desc": "The rsvp bypass administrative-group command specifies administrative groups that must be included in, or excluded from, the links used for CSPF path computation."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show mpls rsvp",
    "cmd": "show mpls rsvp",
    "desc": "Use the show mpls rsvp to display the overall state of the RSVP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show mpls rsvp counters",
    "cmd": "Port-Channel | Switch | Tunnel | Vlan | Vxlan]]",
    "desc": "Use the show mpls rsvp counters command to display RSVP message counters, per interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show mpls rsvp neighbor",
    "cmd": "show mpls rsvp neighbor [A.B.C.D | A:B:C:D:E:F:G:H | summary]",
    "desc": "Use the show mpls rsvp neighbor command to display information about all RSVP neighbors, or for a specific neighbor."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show mpls rsvp session",
    "cmd": "show mpls rsvp session ( <filters> | all ) [ detail ]",
    "desc": "The show mpls rsvp session command displays RSVP session information."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show rib system-tunneling-ldp-rib route ip",
    "cmd": "show rib system-tunneling-ldp-rib route ip",
    "desc": "The show rib system-tunneling-ldp-rib route ip command shows RSVP tunnel next hop resolutions for LDP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show traffic-engineering cspf path",
    "cmd": "show traffic-engineering cspf path [destination-IP <IP address>] [detail]\npath or tunnel name can be specified.\nthe CSPF paths with a given destination IP address.",
    "desc": "The show traffic-engineering cspf path command displays all the paths counted by CSPF."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show traffic-engineering rsvp tunnel detail",
    "cmd": "show traffic-engineering rsvp tunnel detail",
    "desc": "The show traffic-engineering rsvp tunnel detail command shows RSVP tunnel detail including LDP tunneling eligibility."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "Tunnel tunnel2to5via3",
    "cmd": "Tunnel tunnel2to5via3",
    "desc": "Source: 2.2.2.2 Destination: 5.5.5.5 State: up Bandwidth: 0.0 bps, mode explicit Setup priority: 7 Hold priority: 0 MTU signaling: disabled Periodic optimization: disabled Session #2 Tunnel index: 2 LSPs: 1"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show traffic-engineering rsvp tunnel history",
    "cmd": "show traffic-engineering rsvp tunnel history",
    "desc": "Display the history of a RSVP tunnel."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show traffic-engineering rsvp tunnel lsp",
    "cmd": "show traffic-engineering rsvp tunnel lsp",
    "desc": "Display RSVP tunnel LSPs using the show traffic-engineering rsvp tunnel lsp command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "LSP 2:",
    "cmd": "LSP 2:",
    "desc": "Path specification: Path2to4detour, secondary Bandwidth: 0."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show traffic-engineering rsvp tunnel name",
    "cmd": "show traffic-engineering rsvp tunnel name<name of tunnel>",
    "desc": "Display the status of a specific RSVP tunnel, using the name of the tunnel with the show trafficengineering rsvp tunnel name command."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show traffic-engineering rsvp tunnel sub-tunnel summary",
    "cmd": "show traffic-engineering rsvp tunnel sub-tunnel summary",
    "desc": "Display split tunnel information in a summarized fashion using the show traffic-engineering rsvp tunnel sub-tunnel summary command."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show traffic-engineering rsvp",
    "cmd": "show traffic-engineering rsvp",
    "desc": "The show traffic-engineering rsvp command displays the current status of traffic engineering RSVP."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "shutdown (tunnel)",
    "cmd": "no shutdown",
    "desc": "A tunnel is not enabled by default, it must be explicitly enabled using the no shutdown command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "split-tunnel",
    "cmd": "bandwidth_units [sub-tunnels limit max_tunnels] ))\nno split-tunnel\ndefault split-tunnel",
    "desc": "The split-tunnel command enables and configures RSVP sub-tunnels."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "to 1000.00 and the units may be bps, kbps, mbps, or gbps.",
    "cmd": "to 1000.00 and the units may be bps, kbps, mbps, or gbps.",
    "desc": "• max bandwidth_num units - Configures the maximum bandwidth for each sub-tunnel."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "srlg",
    "cmd": "srlg [strict]\nno srlg\ndefault srlg",
    "desc": "The srlg command specifies if link SRLGs of a primary LSP are to be considered as constraints while creating a fast-reroute bypass tunnel with either link or node protection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "neighbor <IP> targeted",
    "cmd": "neighbor ip_address targeted\nno neighbor ip_address targeted\ndefault neighbor targeted",
    "desc": "The neighbor <IP> targeted command is used to configure a targeted adjacency with a non-adjacent router from the LDP configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "timer recovery",
    "cmd": "timer recovery numseconds\nno timer recovery\ndefault timer recovery\ntimer recovery maximum <t> seconds - The maximum accepted recovery time value, configured\nunder helper configuration mode.\ndefault timer recovery maximum <t> seconds\nno timer recovery maximum <t> seconds\ntimer recovery <t> seconds - The requested recovery time value is configurable under the speaker\nconfiguration mode.",
    "desc": "This command will have a different behavior depending on the command mode (speaker or helper)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "timer restart",
    "cmd": "timer restart maximum <t> seconds - The maximum accepted restart time value is configurable\nunder helper configuration mode.\ndefault timer restart maximum <t> seconds\nno timer restart maximum <t> seconds\ntimer restart <t> seconds - The restart time value is configurable under the speaker\nconfiguration mode.\ndefault timer restart <t> seconds\nno timer restart <t> seconds\ntimer recovery <t> seconds - The recovery time value is configurable under the speaker\nconfiguration mode.",
    "desc": "The timer restart command configures a maximum acceptable value for RSVP graceful restart timers received from RSVP neighbors."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "traffic-engineering srlg",
    "cmd": "traffic-engineering srlg (srlg_name|srlg_group_ID)\nno traffic-engineering srlg (srlg_name|srlg_group_ID)\ndefault traffic-engineering srlg (srlg_name|srlg_group_ID)\nname",
    "desc": "The traffic-engineering srlg command configures a shared risk link group (SRLG) for the command-mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "tunnel",
    "cmd": "tunnel name [p2mp]\nno tunnel name [p2mp]\ndefault tunnel name [p2mp]",
    "desc": "The tunnel command enters Traffic Engineering RSVP Tunnel configuration mode for the named tunnel."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "tunneling ldp",
    "cmd": "tunneling ldp",
    "desc": "LDP over RSVP is configured by enabling the tunneling ldp command."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "tunneling ldp ucmp",
    "cmd": "tunneling ldp ucmp",
    "desc": "The tunneling ldp ucmp command configures UCMP with LDP over RSVP."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show traffic-engineering rsvp tunnel summary",
    "cmd": "show traffic-engineering rsvp tunnel summary",
    "desc": "Display a summary of the status of an RSVP tunnel using the show traffic-engineering rsvp tunnel summary command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "bps",
    "cmd": "bps",
    "desc": "up Resource Reservation Protocol for Traffic Engineering (RSVP-TE)"
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "show traffic-engineering rsvp tunnel",
    "cmd": "show traffic-engineering rsvp tunnel",
    "desc": "Display the traffic engineering RSVP tunnel status using the show traffic-engineering rsvp tunnel command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "TAP Aggregation Introduction",
    "cmd": "TAP Aggregation Introduction",
    "desc": "Ethernet-based switches are commonly deployed in dedicated networks to support Test Access Point (TAP) and mirror port traffic toward one or more analysis applications."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "TAP Aggregation Description",
    "cmd": "TAP Aggregation Description",
    "desc": "These sections describe TAP aggregation, timestamps, and keyframes: • TAP Aggregation • Timestamps and Keyframes"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "TAP Aggregation",
    "cmd": "TAP Aggregation",
    "desc": "Test Access Point (TAP) aggregation is the accumulation of data streams and the subsequent dispersal of these streams to devices and applications that analyze, test, verify, parse, detect, or store data."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "TAP Aggregation Extra MPLS Pop Configuration",
    "cmd": "TAP Aggregation Extra MPLS Pop Configuration",
    "desc": "MPLS pop is configurable per tap port as follows to pop one to three labels:"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "IP Steering",
    "cmd": "IP Steering",
    "desc": "IP steering does not work for MPLS packets with four or more labels."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "TAP Aggregation MPLS Pop",
    "cmd": "TAP Aggregation MPLS Pop",
    "desc": "The MPLS pop supports tools that do not parse MPLS labels and therefore need the switch to remove (pop) the MPLS header."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "TAP Aggregation 802.1br EVN Tag Stripping",
    "cmd": "TAP Aggregation 802.1br EVN Tag Stripping",
    "desc": "802.1br-E/VN Tag Stripping feature for Tap Aggregation mode strips IEEE 802.1BR E-Tag and Cisco VNTag headers from all tagged packets received on tap interface before delivering them out of tool interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "TAP Aggregation Commands",
    "cmd": "TAP Aggregation Commands",
    "desc": "Global Configuration Commands • hardware forwarding system-profile-tap-aggregation • platform fm6000 keyframe • platform fm6000 keyframe device • platform fm6000 keyframe fields skew • platform fm6000 keyframe rate"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "class (policy-map (tapagg))",
    "cmd": "default [SEQ_NUM] class class_name\nno [SEQ_NUM] class class_name",
    "desc": "The class (policy-map (tapagg)) command places the switch in the policy-map-class (TAPagg) configuration mode, which is a group-change mode that defines a TAP aggregation class by associating the class’s eponymous class-map to a set statement."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "class-map type tapagg",
    "cmd": "class-map type tapagg match-any class_name\nno class-map type tapagg match-any class_name\ndefault class-map type tapagg match-any class_name",
    "desc": "The class-map type tapagg command places the switch in class-map (tapagg) configuration mode, which is a group change mode that modifies a tapagg class map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "encapsulation",
    "cmd": "encapsulation {dot1br | vn-tag} strip\nno encapsulation {dot1br | vn-tag} strip\ndefault encapsulation {dot1br | vn-tag} strip",
    "desc": "The encapsulation command is configured under Tap Aggregation mode to enable the 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "hardware forwarding system-profile-tap-aggregation",
    "cmd": "hardware forwarding system profile [system-profile-default | system-profile-tap-aggregation |\ndefault hardware forwarding system profile [system-profile-default | system-profile-tapaggregation | module]",
    "desc": "The hardware forwarding system-profile-tap-aggregation command sets the global hardware forwarding system profile on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "mac runt",
    "cmd": "mac runt [drop | pad | pass-through]",
    "desc": "The mac runt command configures runt packet behavior for TAP aggregation on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "mac timestamp",
    "cmd": "mac timestamp TS_PROPERTY",
    "desc": "The mac timestamp command enables timestamping on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "ACL",
    "title": "match (class-map (tapagg))",
    "cmd": "no SEQ_NUM] match ip access-group list_name\ndefault SEQ_NUM] match ip access-group list_name",
    "desc": "The match command adds an ACL to the configuration-mode class map and associates a sequence number to the ACL."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "match (policy-map (tapagg))",
    "cmd": "SET_VALUE\nno match [VLAN_TAG] SOURCE_ADDR [SOURCE_PORT] DEST_ADDR [DEST_PORT] [PROTOCOL]\ndefault match [VLAN_TAG] SOURCE_ADDR [SOURCE_PORT] DEST_ADDR [DEST_PORT]\nprotocol. Use CLI syntax assistance to view options for specific protocols when creating a\npermit rule.",
    "desc": "The match command adds a rule to the configuration-mode TAP aggregation policy map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "mode (tap-agg configuration mode)",
    "cmd": "mode exclusive\nno mode exclusive\ndefault mode exclusive",
    "desc": "The mode command configures the switch’s TAP aggregation mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "mode exclusive no-errdisable (tap-agg configuration mode)",
    "cmd": "mode exclusive no-errdisable INT_NAME",
    "desc": "The mode exclusive no-errdisable command configures the specified interface to remain enabled, regardless of its switchport mode, when TAP aggregation is enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "platform fm6000 keyframe",
    "cmd": "platform fm6000 keyframe kf_name interface ethernet [e_range ipv4_addr mac_addr\nno platform fm6000 keyframe kf_name\ndefault platform fm6000 keyframe kf_name",
    "desc": "The platform fm6000 keyframe command enables keyframe generation for data streams transmitted from specified ethernet interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "platform fm6000 keyframe device",
    "cmd": "platform fm6000 keyframe kf_name device device_id\nno platform fm6000 keyframe kf_name device\ndefault platform fm6000 keyframe kf_name device",
    "desc": "The platform fm6000 keyframe device command configures the 16-bit number that the specified keyframe lists as the device ID in its payload."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "platform fm6000 keyframe fields skew",
    "cmd": "platform fm6000 keyframe kf_name fields skew",
    "desc": "Keyframes may optionally include skew numerator and skew denominator fields."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "platform fm6000 keyframe rate",
    "cmd": "platform fm6000 keyframe kf_name rate tx_rate",
    "desc": "The platform fm6000 keyframe rate command specifies the transmission rate for the specified keyframe from each interface from which it is configured to egress."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "platform fm6000 keyframe source",
    "cmd": "platform fm6000 keyframe kf_name source ip ipv4_addr\nno platform fm6000 keyframekf_name source ip\ndefault platform fm6000 keyframe kf_name source ip",
    "desc": "The platform fm6000 keyframe source command configures the source IP address that the specified keyframe lists in its IP header."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "platform sand multicast replication default",
    "cmd": "platform sand multicast replication default {fabric-egress | ingress}\nno platform sand multicast replication default\ndefault platform sand multicast replication default",
    "desc": "The platform sand multicast replication default command configures the default replication mode on Sand platform switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Multicast",
    "title": "platform sand multicast replication ingress maximum",
    "cmd": "platform sand multicast replication ingress maximum max_value\nno platform sand multicast replication ingress maximum\ndefault platform sand multicast replication ingress maximum",
    "desc": "The platform sand multicast replication ingress maximum command configures maximum members for ingress-only replication."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "policy-map type tapagg",
    "cmd": "policy-map type tapagg map_name\nno policy-map type tapagg map_name\ndefault policy-map type tapagg map_name",
    "desc": "The policy-map type tapagg command places the switch in policy-map (tapagg) configuration mode, which is a group-change mode that modifies a TAP-aggregation policy map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "service-policy type tapagg (Interface mode)",
    "cmd": "service-policy type tapagg input map_name",
    "desc": "The service-policy type tapagg command applies a specified TAP-aggregation policy map to the configuration-mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "set (policy-map-class (tapagg))",
    "cmd": "set SET_VALUE\nno set SET_VALUE\ndefault set SET_VALUE",
    "desc": "The set command specifies the data replication method for traffic filtered by the associated class map in the configuration-mode policy map."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show hardware tcam profile",
    "cmd": "show hardware tcam profile detail",
    "desc": "Use the show hardware tcam profile command to display The TCAM prifile by configuration and status."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces tap",
    "cmd": "show interfaces [INTERFACE] tap [INFO_LEVEL]",
    "desc": "The show interfaces tap command displays TAP-port configuration information for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces tool",
    "cmd": "show interfaces [INTERFACE] tool",
    "desc": "The show interfaces tool command displays tool port configuration information for the specified interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform fm6000 keyframe",
    "cmd": "show platform fm6000 keyframe [KEYFRAME_ID]",
    "desc": "The show platform fm6000 keyframe command displays configured information for the specified keyframes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show platform sand mcast capacity",
    "cmd": "show platform sand mcast capacity [threshold threshold_value]",
    "desc": "The show platform sand mcast capacity command displays the usage details of hardware resources on Sand platform switches."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "TAP Aggregation Extra MPLS POP (4 to 6 Labels) Commands",
    "cmd": "TAP Aggregation Extra MPLS POP (4 to 6 Labels) Commands",
    "desc": "show hardware tcam profile"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "TAP Aggregation Configuration",
    "cmd": "TAP Aggregation Configuration",
    "desc": "These sections describe TAP aggregation configuration tasks: • Enabling Tap Aggregation Mode • Tap Aggregation Mixed Mode • Tap Port Configuration • Tool Port Configuration • Per-linecard TCAM Profile Configuration"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "TAP Aggregation Mixed Mode",
    "cmd": "TAP Aggregation Mixed Mode",
    "desc": "On a modular switch, the user can configure TAP Aggregation on some linecards and leave other linecards to operate normally."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "TAP Port Configuration",
    "cmd": "interface ethernet 41-43",
    "desc": "TAP ports function when the switch is in TAP aggregation mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "TAP Aggregation QoS Handling on TAP Ports",
    "cmd": "TAP Aggregation QoS Handling on TAP Ports",
    "desc": "Before EOS 4."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "TAP Aggregation Group Configuration",
    "cmd": "interface port-channel 101",
    "desc": "TAP aggregation groups associate a set of TAP ports with a set of tool ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "TAP Aggregation Traffic Steering",
    "cmd": "TAP Aggregation Traffic Steering",
    "desc": "Traffic steering is a TAP aggregation process that uses class maps and policy maps to direct data streams at tool ports that are not otherwise associated to the ingress TAP port."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "TAP Aggregation Policies",
    "cmd": "TAP Aggregation Policies",
    "desc": "A policy map filters data packets by using classes and match rules."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "Traffic Steering to Match Inner Header Fields",
    "cmd": "Traffic Steering to Match Inner Header Fields",
    "desc": "This feature allows matching the inner header fields (either IPv4 or IPv6 inner fields) of encapsulated traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "eq 8888",
    "cmd": "eq 8888",
    "desc": "5. ACL rule for filtering an IPv6-over-GRE(IPv4) traffic based on the inner addresses, inner TCP/UDP protocol, and inner TCP/UDP ports. switch(config)# ip access-list acl4 switch(config-acl-acl4)# permit gre any any inner ipv6 udp host 2019::baba eq…"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "TAP Aggregation GUI",
    "cmd": "TAP Aggregation GUI",
    "desc": "The switch provides a Graphical User Interface (GUI) for creating and viewing a TAP aggregation configuration and displaying LANZ traffic statistics."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "TAP Aggregation Keyframe and Timestamp Configuration",
    "cmd": "TAP Aggregation Keyframe and Timestamp Configuration",
    "desc": "This section contains the following topics: • TAP Aggregation Keyframe Generation • Enabling Timestamp Insertion on an Interface"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "TAP Aggregation Keyframe Generation",
    "cmd": "platform fm6000 keyframe key-1 interface ethernet 11-15 10.21.1.4 10.4E21.9F11",
    "desc": "Keyframes contain routable IP packets that provide information to relate timestamps with the complete ASIC counter and absolute UTC time."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "Tap Aggregation Hardware Forwarding Profile",
    "cmd": "Tap Aggregation Hardware Forwarding Profile",
    "desc": "In order to enable the MPLS Pop and 802."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show tap aggregation groups",
    "cmd": "show tap aggregation groups [INFO_LEVEL] [GROUP_NAMES]",
    "desc": "The show tap aggregation groups command displays the TAP and tool port members of the specified TAP aggregation groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "MPLS",
    "title": "switchport mpls pop all",
    "cmd": "switchport [tool | tap] mpls pop all\nno switchport [tool | tap] mpls pop all",
    "desc": "The switchport mpls pop all command configures the MPLS Pop on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport tap allowed vlan",
    "cmd": "switchport tap allowed vlan EDIT_ACTION",
    "desc": "The switchport tap allowed vlan command creates or modifies the list of VLANs for which the configuration mode interface, in TAP mode, handles tagged traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "switchport tool encapsulation",
    "cmd": "switchport tool encapsulation {dot1br | vn-tag} strip\nno switchport tool encapsulation dot1br | vn-tag} strip\ndefualt switchport tool encapsulation dot1br | vn-tag} strip",
    "desc": "The switchport tool encapsulation command is configured under Ethernet Interface configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "switchport tap default group",
    "cmd": "switchport tap default group group_name\nno switchport tap default group\ndefault switchport tap default group",
    "desc": "The switchport tap default group command assigns the configuration-mode interface to the specified tool group as a TAP port member."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "switchport tap identity",
    "cmd": "switchport tap identity port_id\nno switchport tap identity\ndefault switchport tap identity",
    "desc": "The switchport tap identity command associates a VLAN number to the configuration mode TAP interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport tap native vlan",
    "cmd": "switchport tap native vlan v_num\nno switchport tap native vlan\ndefault switchport tap native vlan",
    "desc": "The switchport tap native vlan command specifies the TAP-mode native VLAN for the configuration-mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "switchport tap truncation",
    "cmd": "switchport tap truncation packet_size\nno switchport tap truncation\ndefault switchport tap truncation",
    "desc": "The switchport tap truncation command configures the configuration-mode interface, as a TAP port, to truncate inbound packets to the specified packet size."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport tool allowed vlan",
    "cmd": "switchport tool allowed vlan EDIT_ACTION",
    "desc": "The switchport tool allowed vlan command creates or modifies the list of VLANs for which the configuration-mode interface, in tool mode, handles tagged traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "switchport tool group",
    "cmd": "switchport tool group EDIT_ACTION",
    "desc": "The switchport tool group command modifies the configuration-mode interface’s tool port membership in the specified TAP aggregation groups."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "switchport tool identity",
    "cmd": "switchport tool identity dot1q\nno switchport tool identity dot1q\ndefault switchport tool identity dot1q",
    "desc": "The switchport tool identity command configures the configuration-mode interface to add a tier-1 VLAN tag (dot1q) to packets it receives from TAP ports."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "switchport tool truncation",
    "cmd": "switchport tool truncation packet_size\nno switchport tool truncation\ndefault switchport tool truncation",
    "desc": "The switchport tool truncation command configures the configuration-mode interface, as a tool port, to truncate outbound packets to 160 bytes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Logging",
    "title": "Logging LANZ Congestion Events",
    "cmd": "queue-monitor length log 10",
    "desc": "To generate syslog messages when queue lengths on an interface exceed its upper threshold, enable logging with the queue-monitor length log command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "clear queue-monitor length statistics",
    "cmd": "clear queue-monitor length statistics",
    "desc": "The clear queue-monitor length statistics command resets the occurrences of all overthreshold events on the switch, including global buffer information (if supported)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "max-connections",
    "cmd": "max-connections connections",
    "desc": "The max-connections command sets the maximum number of client connections the switch accepts for streaming LANZ data."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length (global configuration mode)",
    "cmd": "queue-monitor length\nno queue-monitor length\ndefault queue-monitor length",
    "desc": "The queue-monitor length (global configuration mode) command enables LANZ with the current settings, or with the default settings if LANZ has not yet been configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length cpu thresholds",
    "cmd": "queue-monitor length cpu thresholds [upper_limit | lower_limit]\nno queue-monitor length cpu thresholds\ndefault queue-monitor length cpu thresholds",
    "desc": "The queue-monitor length cpu thresholds command sets the queue length threshold to define “congested” on all CPU ports for purposes of LANZ reporting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length fabric thresholds",
    "cmd": "queue-monitor length fabric thresholds [upper_limit | lower_limit]\nno queue-monitor length fabric thresholds\ndefault queue-monitor length fabric thresholds",
    "desc": "The queue-monitor length fabric thresholds command sets the queue-monitor length thresholds to define “congested” on all fabric ports for purposes of LANZ reporting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length global-buffer log",
    "cmd": "queue-monitor length global-buffer log interval\nno queue-monitor length global-buffer log\ndefault queue-monitor length global-buffer log",
    "desc": "The queue-monitor length global-buffer log command enables logging of global buffer overthreshold events."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length global-buffer thresholds",
    "cmd": "queue-monitor length global-buffer thresholds max_segments min_segments\nno queue-monitor length global-buffer log\ndefault queue-monitor length global-buffer log",
    "desc": "The queue-monitor length global-buffer thresholds command sets global buffer thresholds for the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length global-buffer",
    "cmd": "queue-monitor length global-buffer\nno queue-monitor length global-buffer\ndefault queue-monitor length global-buffer",
    "desc": "The queue-monitor length global-buffer command includes global buffer usage in LANZ reporting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length log",
    "cmd": "queue-monitor length log interval",
    "desc": "The queue-monitor length log command enables logging of queue-length over-threshold events when LANZ is enabled on the switch (see queue-monitor length (global configuration mode))."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length mirror",
    "cmd": "queue-monitor length mirror",
    "desc": "The queue-monitor length mirror command enables LANZ mirroring."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "queue-monitor length mirror destination",
    "cmd": "queue-monitor length mirror destination cpu | ports",
    "desc": "The queue-monitor length mirror destination command results in automatically sending traffic experiencing congestion to either the CPU or an Ethernet egress interface destination, once a queue threshold is crossed."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length notifying",
    "cmd": "queue-monitor length notifying\nno queue-monitor length notifying\ndefault queue-monitor length notifying\noperate in Notifying Mode.\nenabled will cause LANZ to revert to Polling Mode.\ncongestion on CPU queues on Arad switches.",
    "desc": "The queue-monitor length notifying command enables Notifying Mode on Arad and Jericho switches."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length thresholds",
    "cmd": "queue-monitor length thresholds upper_limit lower_limit\nno queue-monitor length\ndefault queue-monitor length",
    "desc": "The queue-monitor length thresholds command sets both upper and lower queue length thresholds to define “congested” on the command-mode interface for purposes of LANZ reporting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length threshold (Arad/Jericho/Qumran)",
    "cmd": "queue-monitor length threshold upper_limit\nno queue-monitor length\ndefault queue-monitor length",
    "desc": "The queue-monitor length threshold command sets the upper queue-length threshold on Arad, Jericho, and Qumran platforms to define “congested” on the command-mode interface for purposes of LANZ reporting."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor length update-interval",
    "cmd": "queue-monitor length update-interval interval\nno queue-monitor length\ndefault queue-monitor length",
    "desc": "The queue-monitor length update-interval command sets the interval between congestion updates when LANZ is in Notifying Mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "queue-monitor streaming",
    "cmd": "queue-monitor streaming",
    "desc": "The queue-monitor streaming command places the switch in queue-monitor-streaming configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor length",
    "cmd": "show queue-monitor length",
    "desc": "The show queue-monitor length command displays a report of recent over-threshold events for all interfaces, limited to the last 1000 records, with the newest events listed first."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor length all",
    "cmd": "show queue-monitor length all",
    "desc": "The show queue-monitor length all command displays all available over-threshold event records on the switch including global buffer information, with the most recent events listed first."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor length cpu",
    "cmd": "show queue-monitor length cpu",
    "desc": "The show queue-monitor length cpu command displays LANZ data for CPU ports on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor length csv",
    "cmd": "show queue-monitor length csv",
    "desc": "The show queue-monitor length csv command displays LANZ records in Comma-Separated Value (CSV) format with the oldest samples displayed first."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor length drops",
    "cmd": "show queue-monitor length [INTERFACES][FACTOR] drops",
    "desc": "The show queue-monitor length drops command displays a report of cumulative transmission drop totals for a range of interfaces or for all interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor length ethernet",
    "cmd": "show queue-monitor length ethernet e-range",
    "desc": "The show queue-monitor length ethernet command displays a report of recent over-threshold events for a range of interfaces, with the newest events listed first."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor length global-buffer",
    "cmd": "show queue-monitor length global-buffer",
    "desc": "The show queue-monitor length global-buffer command displays a report of recent high usage, low usage and update events for the global buffer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor length limit",
    "cmd": "show queue-monitor length limit [INTERFACES] number",
    "desc": "The show queue-monitor length limit command displays a report of recent over-threshold events for a range of interfaces or for all interfaces, limited by a specified number of records."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor length statistics",
    "cmd": "show queue-monitor length statistics",
    "desc": "The show queue-monitor length statistics command displays LANZ statistics for all interfaces, showing the traffic class and number of recorded congestion events for each interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor length status",
    "cmd": "show queue-monitor length status\nconfiguration mode) command), the command displays the monitoring mode per-linecard.\nqueue-monitor length notifying command), some linecards may still run LANZ in Polling Mode under the\nfollowing circumstances:\nthe card (here, the mode is shown as “polling due to SSO configured”).\nstatistic capabilities have been configured (here, the mode is shown as “polling due to counters",
    "desc": "The show queue-monitor length status command displays the current LANZ configuration for the switch and for each interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor length tx-latency",
    "cmd": "show queue-monitor length [INTERFACES][FACTOR] tx-latency",
    "desc": "The show queue-monitor length tx-latency command displays the latency data of recent LANZ events for a range of interfaces or for all interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show queue-monitor streaming clients",
    "cmd": "show queue-monitor streaming clients",
    "desc": "The show queue-monitor streaming clients command displays the number of presently connected clients through LANZ streaming, and also displays their host-names."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "tcpdump queue-monitor",
    "cmd": "tcpdump queue-monitor",
    "desc": "The tcpdump queue-monitor command exports congested traffic to a packet capture device or another tool for analysis, or directly to the switch CPU for inspection."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "Hardware Flow Tracking with IPFIX Export",
    "cmd": "Hardware Flow Tracking with IPFIX Export",
    "desc": "Hardware Flow Tracking uses match criteria to collect data from packets based on defined flow profiles."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "port 4739",
    "cmd": "port 4739",
    "desc": "Active interfaces: Et48 This command displays the hardware flow tracking IPFIX template."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "clear flow tracking sampled counters",
    "cmd": "clear flow tracking sampled counters [tracker tracker_name [exporter exporter_name]]",
    "desc": "The clear flow tracking sampled counters command clears the flow tracking counters for all trackers, a specified tracker, or a specified tracker and exporter."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "collector",
    "cmd": "collector {ipv4_address | ipv6_address} [port port_number]\nno collector {ipv4_address | ipv6_address} [port port_number]\ndefault collector {ipv4_address | ipv6_address} [ port port_number ]",
    "desc": "The collector command configures a collector to receive flow records from a specified exporter."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "QoS",
    "title": "dscp",
    "cmd": "dscp dscp_value\nno dscp dscp_value\ndefault dscp dscp_value",
    "desc": "The dscp command configures the Differentiated Services Code Point (DSCP) value for a specific exporter."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "exporter",
    "cmd": "exporter exporter_name\nno exporter exporter_name\ndefault exporter exporter_name",
    "desc": "The exporter command places the switch in sampled flow tracking exporter configuration mode for the specified exporter and creates the exporter if it does not yet exist."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "flow tracker sampled",
    "cmd": "flow tracker sampled tracker_name\nno flow tracker sampled tracker_name\ndefault flow tracker sampled tracker_name",
    "desc": "The flow tracker sampled command configures an interface to be part of a flow tracker."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "flow tracking sampled",
    "cmd": "flow tracking sampled\nno flow tracking sampled\ndefault flow tracking sampled",
    "desc": "The flow tracking sampled command places the switch in sampled flow tracking configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "format ipfix version",
    "cmd": "format ipfix version ipfix_version [max-packet-size max-packet-size value]\nno format ipfix version ipfix_version [max-packet-size]\ndefault format ipfix version ipfix_version [max-packet-size]",
    "desc": "The format ipfix version command configures the IPFIX version and maximum packet size for a specific exporter."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "local interface",
    "cmd": "local interface interface\nno local interface\ndefault local interface",
    "desc": "The local interface command configures the local source interface for the specific exporter."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "record export on inactive timeout",
    "cmd": "record export on inactive timeout timeout_value\nno record export on inactive timeout\ndefault record export on inactive timeout",
    "desc": "The record export on inactive timeout command configures the interval at which inactive flow records time out and are exported for a flow tracker."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "record export on interval",
    "cmd": "record export on interval interval_value\nno record export on interval\ndefault record export on interval",
    "desc": "The record export on interval command configures the interval at which active flow records are exported for a flow tracker."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sample",
    "cmd": "sample sample_rate\nno sample\ndefault sample",
    "desc": "The sample command enables the sample rate for a specific sampled flow tracker."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show flow tracking sampled",
    "cmd": "show flow tracking sampled [tracker tracker_name [exporter exporter_name]]",
    "desc": "The show flow tracking sampled tracker command displays information about the status of a specific tracker and the status of a specified exporter within that tracker."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show flow tracking sampled counters",
    "cmd": "show flow tracking sampled counters [tracker tracker_name [exporter exporter_name]]",
    "desc": "The show flow tracking sampled counters command displays information about the flow tracking counters of a specific tracker and the counters of a specified exporter within that tracker."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show flow tracking sampled flow-table",
    "cmd": "src-ip | src-port | tracker | vlan | vrf ]",
    "desc": "The show flow tracking sampled flow-table command displays information about the active flows maintained in the EOS."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show flow tracking sampled ipfix options-table",
    "cmd": "show flow tracking sampled ipfix options-table tracker [flow-key | flow-tracker | interface |\nvrf]",
    "desc": "The show flow tracking sampled ipfix options-table command displays information about the sampled IPFIX options table available."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show flow tracking sampled ipfix template",
    "cmd": "show flow tracking sampled ipfix template [data | options | tracker]",
    "desc": "The show flow tracking sampled ipfix template command displays information about the exported IPFIX data templates and options templates."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "template interval",
    "cmd": "template interval interval\nno template interval\ndefault template interval",
    "desc": "The template interval command configures the interval at which templates are exported for a specific exporter."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "tracker",
    "cmd": "tracker tracker_name\nno tracker tracker_name\ndefault tracker tracker_name",
    "desc": "The tracker command configures a sampled flow tracker for a device."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sFlow",
    "cmd": "sFlow",
    "desc": "This chapter describes Arista's implementation of sFlow, including configuration instructions and command descriptions."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sFlow Conceptual Overview",
    "cmd": "sFlow Conceptual Overview",
    "desc": "Sampled Flow Tracking Commands"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sFlow Technology",
    "cmd": "sFlow Technology",
    "desc": "Sampled Flow (sFlow) provides a multi-vendor sampling technology that continuously monitors application level traffic flow at wire speed simultaneously on all interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sFlow Agents",
    "cmd": "sFlow Agents",
    "desc": "The sFlow agent runs a software process as part of the network management software within an Arista switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sFlow Collector",
    "cmd": "sFlow Collector",
    "desc": "An sFlow collector runs software that analyzes and reports network traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sFlow Data",
    "cmd": "sFlow Data",
    "desc": "The sFlow Agent uses two forms of sampling: statistical packet-based sampling of switched flows and timebased sampling of network interface statistics."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sFlow and Mirroring",
    "cmd": "sFlow and Mirroring",
    "desc": "sFlow and Mirroring supports using the same interface for a mirroring session and sFlow at the same time."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "Hardware Accelerated sFlow",
    "cmd": "ip routing",
    "desc": "Compatible platforms support hardware-accelerated sFlow."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sFlow Subinterfaces",
    "cmd": "sFlow Subinterfaces",
    "desc": "The sflow sample [input | output] subinterface command configures ifIndex values for subinterfaces on input and output ports to be included in the sFlow sample."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sFlow Commands",
    "cmd": "sFlow Commands",
    "desc": "Global Configuration Commands • sflow agent • sflow datagram • sflow destination • sflow extension bgp • sflow extension router • sflow extension switch • sflow extension vpls • sflow polling-interval"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "clear sflow counters",
    "cmd": "clear sflow counters",
    "desc": "The clear sflow counters command resets the global sFlow statistics, which includes the number of samples and sample pool."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow agent",
    "cmd": "sflow agent address [ipv4_address | ipv6_address]\nno sflow agent address\ndefault agent address",
    "desc": "The sflow agent command allows you to specify a specific type of address used by sFlow to identify the datagrams exported to the collector and uniquely identifies the origin of the datagrams."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow datagram",
    "cmd": "sflow datagram size maximum bytes",
    "desc": "The sflow datagram command configures the size of the sFlow datagram from 200 to 1500 bytes to help avoid fragmentation of the datagram."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "sflow destination",
    "cmd": "sflow destination dest_addr [UDP_PORT]\nno sflow destination dest_addr [UDP_PORT]\ndefault sflow destination dest_addr [UDP_PORT]",
    "desc": "The sflow destination command specifies an sFlow collector IPv4 or IPv6 address and, optionally, a UDP port (the default is 6343)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow enable",
    "cmd": "sflow enable\nno sflow enable\ndefault sflow enable",
    "desc": "The sflow enable command enables sFlow on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "sflow extension bgp",
    "cmd": "sflow extension bgp\nno sflow extension bgp\ndefault sflow extension bgp\nBGP sFlow export behaves differently on different switch platforms as follows:\nuse software simulation to determine the egress port.\nfrom the first path of the ECMP route and a BGP next hop of 0.\nbut identifies the BGP next hop as 0.\nuse software simulation to determine the egress port.",
    "desc": "The sflow extension bgp command enables BGP export to sFlow."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "BGP",
    "title": "sflow extension evpn mpls",
    "cmd": "sflow evpn mpls",
    "desc": "The sflow extension evpn mpls command adds support for providing information related to the bridging domain in sFlow packet samples for traffic forwarded through Layer 2 EVPN MPLS."
  },
  {
    "os": "eos",
    "role": "router",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow extension router",
    "cmd": "sflow extension router\nno sflow extension router\ndefault sflow extension router",
    "desc": "By default, the switch provides extended router information in sFlow packets, including the IP version and address of the next-hop router and source and destination mask lengths."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow extension switch",
    "cmd": "sflow extension switch\nno sflow extension switch\ndefault sflow extension switch",
    "desc": "By default, the switch provides extended switch information in sFlow packets, including source and destination VLANs and priorities."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "sflow extension switch vlan",
    "cmd": "sflow extension switch vlan forwarding\nno sflow extension switch vlan forwarding\ndefault sflow extension switch vlan forwarding",
    "desc": "The sflow extension switch vlan command in the Global Configuration Mode feature supports providing the VLAN from the bridged packet instead of decoding it from the Ethernet frame and reports the input and output VLAN fields."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow extension vpls",
    "cmd": "sflow extension vpls\nno sflow extension vpls\ndefault sflow extension vpls",
    "desc": "The sflow extension vpls command enables VPLS exporting to sFlow configuration."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow interface",
    "cmd": "sflow interface",
    "desc": "The sflow interface command enables the sampling of egress packets from an interface on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow polling-interval",
    "cmd": "sflow polling-interval interval_period\nno sflow polling-interval\ndefault sflow polling-interval",
    "desc": "The sflow polling-interval command specifies the counters polling interval."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow qos",
    "cmd": "sflow qos dscp dscp_value\nno sflow qos dscp\ndefault sflow qos dscp",
    "desc": "The sflow qos command configures Quality of Service (QoS) for sFlow datastreams by specifying the Differentiated Services Code Point (DSCP) value for sFlow export datagrams."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow run",
    "cmd": "sflow run\nno sflow run\ndefault sflow run",
    "desc": "The sflow run command globally enables sFlow on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow sample",
    "cmd": "sflow sample sample_rate\nno sflow sample\ndefault sflow sample",
    "desc": "The sflow sample command sets the packet sampling rate."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow sample input",
    "cmd": "sflow sample input [subinterface] [svi ifindex [member | svi]",
    "desc": "The sflow sample input command enables sFlow sampling on Switched Virtual Interfaces (SVIs) or subinterfaces, and explicitly targets the input direction."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow sample output interface",
    "cmd": "no sflow sample output interface",
    "desc": "By default, sFlow samples include information about the output interface of the sampled packet."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow sample rewrite",
    "cmd": "sflow sample rewrite dscp",
    "desc": "The sflow sample rewrite command configures sFlow to modify the Differentiated Services Code Point (DSCP) value of the sampled packet IP header as included in the sFlow datagram."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow sample truncate",
    "cmd": "sflow sample truncate size bytes",
    "desc": "The sflow sample truncate command configures the maximum length of the sampled packet header included in the sFlow datagram exported to a collector."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Routing",
    "title": "sflow sample vxlan",
    "cmd": "sflow sample vxlan header strip",
    "desc": "The sflow sample vxlan command explicitly configures sFlow to intelligently sample and parse VXLAN encapsulated traffic."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow source",
    "cmd": "sflow source source_addr\nno sflow source\ndefault sflow source",
    "desc": "The sflow source command specifies the IP address used in the Agent address filed of the IPv4 or IPv6 sFlow datagram that the switch sends to the collector."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "sflow source-interface",
    "cmd": "sflow source-interface INT_NAME\nno sflow source-interface\ndefault sflow source-interface",
    "desc": "The sflow source-interface command specifies the source IP address set to the IP address of the specified interfaces that the switch sends to the collector."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NAT",
    "title": "sflow vrf",
    "cmd": "sflow vrf [vrf_name | default] [agent address ip_address] [destination",
    "desc": "The sflow vrf command configures sFlow parameters on Virtual Routing Forwarding instances, and enables sFlow functionality to be established specific VRFs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show sflow",
    "cmd": "show sflow [detail]",
    "desc": "The show sflow command displays configured sFlow parameters, operational status, and statistics."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show sflow interfaces",
    "cmd": "show sflow interfaces",
    "desc": "The show sflow interfaces command displays the interfaces with sFlow enabled."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "SNMP",
    "cmd": "SNMP",
    "desc": "This chapter describes the Arista switch SNMP agent and contains these sections: • SNMP Introduction • SNMP Conceptual Overview • Configuring SNMP • SNMP Commands"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "SNMP Introduction",
    "cmd": "SNMP Introduction",
    "desc": "Arista Networks switches support many standard SNMP MIBs, making it easier to integrate these platforms into existing network management infrastructures."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "SNMP Conceptual Overview",
    "cmd": "SNMP Conceptual Overview",
    "desc": "Simple Network Management Protocol (SNMP) is a protocol that provides a standardized framework and a common language to monitor and manage network devices."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "SNMP Structure",
    "cmd": "SNMP Structure",
    "desc": "The SNMP framework has three parts: • SNMP manager: The SNMP manager controls and monitors network host activities and is typically part of a Network Management System (NMS)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "SNMP Notifications",
    "cmd": "SNMP Notifications",
    "desc": "SNMP notifications are messages, sent by the agent, informing of an event or a network condition."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "SNMP Versions",
    "cmd": "SNMP Versions",
    "desc": "Arista switches support the following SNMP versions: • SNMPv1: The Simple Network Management Protocol, defined in RFC 1157."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "SNMP Authentication and Encryption Methods",
    "cmd": "SNMP Authentication and Encryption Methods",
    "desc": "The following are the SNMP stronger Authentication and Encryption methods: • Authentication • MD5 • SHA-1 • SHA-224 • SHA-256 • SHA-384 • SHA-512 • Encryption • AES • DES • AES-192 • AES-256 Note: Use the following minimums when using the stronger SN…"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "octet",
    "cmd": "octet",
    "desc": "OctetString hexadecimal string opaque Opaque hexadecimal string string OctetString ascii string SET Requests For SET requests, script is passed three lines on stdin: the command (set), and the requested OID, and the"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Interfaces",
    "title": "SNMP IP Address ACL Support",
    "cmd": "SNMP IP Address ACL Support",
    "desc": "SNMP IP address ACL support provides the ability to add access-lists to limit the source addresses that can be used to query the SNMP server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "Show Commands",
    "cmd": "show snmp ipv4 access-list summary",
    "desc": "Use the show snmp ipv4 access-list summary command to display an abbreviated output of an IPv4 access-list."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "SNMP Commands",
    "cmd": "SNMP Commands",
    "desc": "Global Configuration Commands • no snmp-server • snmp-server chassis-id • snmp-server community • snmp-server contact • snmp-server enable traps • snmp-server engineID local • snmp-server engineID remote"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "no snmp-server",
    "cmd": "no snmp-server\ndefault snmp-server",
    "desc": "The no snmp-server and default snmp-server commands disable Simple Network Management Protocol (SNMP) agent operation by removing all snmp-server commands from running-config."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp",
    "cmd": "show snmp",
    "desc": "The show snmp command displays SNMP information including the SNMP counter status and the chassis ID string."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp community",
    "cmd": "show snmp community",
    "desc": "The show snmp community command displays the Simple Network Management Protocol (SNMP) community access strings configured by the snmp-server community command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp engineID",
    "cmd": "show snmp engineID",
    "desc": "The show snmp engineID command displays the local SNMP engine information configured on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp group",
    "cmd": "show snmp group [GROUP_LIST]",
    "desc": "The show snmp group command shows the names of configured SNMP groups along with the security model, and view status of each group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp local-interface",
    "cmd": "show snmp local-interface",
    "desc": "The show snmp local-interface command displays the interface whose IP address is the source address for SNMP traps."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp mib",
    "cmd": "show snmp mib OBJECTS",
    "desc": "The show snmp mib command displays values associated with specified MIB object identifiers (OIDs) that are registered on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp notification",
    "cmd": "show snmp notification",
    "desc": "The show snmp notification command displays the SNMP trap generation information."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp notification host",
    "cmd": "show snmp notification host",
    "desc": "The show snmp notification host command displays information for Simple Network Management Protocol notification."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp notification | grep bridge",
    "cmd": "show snmp notification | grep bridge",
    "desc": "Use the show snmp notification | grep bridge command to display the enabled or disabled status of each trap type."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp user",
    "cmd": "show snmp user [USER_LIST]",
    "desc": "The show snmp user command shows information about Simple Network Management Protocol (SNMP) users."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp v2-mib chassis",
    "cmd": "show snmp v2-mib chassis",
    "desc": "The show snmp v2-mib chassis command displays the Simple Network Management Protocol (SNMP) server serial number or the chassis ID string configured by the snmp-server chassis-id command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp v2-mib contact",
    "cmd": "show snmp v2-mib contact",
    "desc": "The show snmp v2-mib contact command displays the Simple Network Management Protocol (SNMP) system contact string configured by the snmp-server contact command."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp v2-mib location",
    "cmd": "show snmp v2-mib location",
    "desc": "The show snmp v2-mib location command displays the Simple Network Management Protocol (SNMP) system location string."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "show snmp view",
    "cmd": "show snmp view [VIEW_LIST]",
    "desc": "The show snmp view command displays the information of a Simple Network Management Protocol configuration and the associated MIB."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp trap link-change",
    "cmd": "snmp trap link-change\nno snmp trap link-change\ndefault snmp trap link-change",
    "desc": "The snmp trap link-change command enables Simple Network Management Protocol (SNMP) linkstatus trap generation on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server chassis-id",
    "cmd": "snmp-server chassis-id id_text\nno snmp-server chassis-id\ndefault snmp-server chassis-id",
    "desc": "The snmp-server chassis-id command configures the chassis ID string."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server community",
    "cmd": "snmp-server community string_text [MIB_VIEW][ACCESS][ACL_NAMES]\nno snmp-server community string_text\ndefault snmp-server community string_text",
    "desc": "The snmp-server community command configures the community string."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server contact",
    "cmd": "snmp-server contact contact_string\nno snmp-server contact\ndefault snmp-server contact",
    "desc": "The snmp-server contact command configures the system contact string."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server enable traps",
    "cmd": "snmp-server enable traps [trap_type]\nno snmp-server enable traps [trap_type]\ndefault snmp-server enable trap [trap_type]",
    "desc": "The snmp-server enable traps command enables Simple Network Management Protocol (SNMP) traps."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server engineID local",
    "cmd": "snmp-server engineID local engine_hex\nno snmp-server engineID local\ndefault snmp-server engineID",
    "desc": "The snmp-server engineID local command configures the name for the local Simple Network Management Protocol (SNMP) engine."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server engineID remote",
    "cmd": "snmp-server engineID remote engine_addr [PORT] engine_hex\nno snmp-server engineID remote engine_addr [PORT]\ndefault snmp-server engineID remote engine_addr [PORT]",
    "desc": "The snmp-server engineID remote command configures the name of a Simple Network Management Protocol (SNMP) engine located on a remote device."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server extension",
    "cmd": "snmp-server extension OID_space FILE_PATH [DURATION]",
    "desc": "The snmp-server extension command configures the execution of user supplied scripts to service portions of the OID space."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server group",
    "cmd": "snmp-server group group_name VERSION [CNTX][READ][WRITE][NOTIFY]\nno snmp-server group group_name VERSION\ndefault snmp-server group group_name VERSION",
    "desc": "The snmp-server group command configures a new Simple Network Management Protocol (SNMP) group or modifies an existing group."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server host",
    "cmd": "snmp-server host [ host_id | ip_address] informs [udp-port dest_port] refresh traps\nversion [ 1 | 2c | 3] vrf vrf_name\nno snmp-server host host_id ] informs [udp-port dest_port] refresh traps version\ndefault snmp-server host host_id",
    "desc": "The snmp-server host command configures an SNMP host to send SNMP traps and sets the community string if not previously configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server local-interface",
    "cmd": "snmp-server local-interface INTERFACE\nno snmp-server local-interface\ndefault snmp-server local-interface",
    "desc": "The snmp-server local-interface command specifies the interface where SNMP originates informs and traps."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server location",
    "cmd": "snmp-server location node_locate\nno snmp-server location\ndefault snmp-server location",
    "desc": "The snmp-server location command configures the system location string."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server qosmib counter-interval",
    "cmd": "snmp-server qosmib counter-interval timer_interval\nno snmp-server qosmib counter-interval\ndefault snmp-server qosmib counter-interval",
    "desc": "The snmp-server qosmib counter-interval command configures the interval (in seconds) after which the QoS counters are updated periodically."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server transport",
    "cmd": "snmp-server transport tcp\nno snmp-server transport tcp",
    "desc": "The snmp-server transport command in the Global Configuration Mode opens the TCP port for receiving SNMP requests."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server user",
    "cmd": "snmp-server user user_name group_name [AGENT] VERSION [ENGINE][SECURITY]\nno snmp-server user user_name group_name [AGENT] VERSION\ndefault snmp-server user user_name group_name [AGENT] VERSION",
    "desc": "The snmp-server user command adds a user to a Simple Network Management Protocol (SNMP) group or modifies an existing user's parameters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server view",
    "cmd": "snmp-server view view_name [family_name] INCLUSION\nno snmp-server view view_name [family_name]\ndefault snmp-server view view_name [family_name]",
    "desc": "The snmp-server view command defines a view."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "SNMP",
    "title": "snmp-server vrf",
    "cmd": "snmp-server vrf vrf_name\nno snmp-server vrf vrf_name\ndefault snmp-server vrf vrf_name",
    "desc": "The snmp-server vrf command enables SNMP in the specified VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "allowed-vlan",
    "cmd": "allowed-vlan [VLAN_LIST]\nno allowed-vlan\ndefault allowed-vlan vlan",
    "desc": "The allowed-vlan command specifies the VLANs that may be added when adding or moving a VM from the hypervisor connected to the session specified by the vmtracer mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "autovlan disable",
    "cmd": "autovlan disable\nno autovlan disable\ndefault autovlan disable",
    "desc": "Default VM Tracer session settings enable auto provisioning, which allows the dynamic assignment and pruning of VLANs when creating, deleting, or moving a VM attached to the ESX connected to the switch to a"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "password",
    "cmd": "password [ENCRYPTION] [password]",
    "desc": "The password command specifies the token that authorizes the username to the vCenter associated with the VM Tracer mode session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "password (vmtracer-VXLAN mode)",
    "cmd": "password [ENCRYPTION] password",
    "desc": "The password command specifies the token that authorizes the username on the NSX for vSphere® (NSXV) server located at the URL configured for the configuration mode VM Tracer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show vmtracer all",
    "cmd": "show vmtracer all",
    "desc": "The show vmtracer all command displays VM Tracer data for all switches with the vSphere scope."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show vmtracer session",
    "cmd": "show vmtracer session [SESSION_LIST]",
    "desc": "The show vmtracer session command displays vCenter and vShield connection information for a specified VM Tracer session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show vmtracer session vcenter",
    "cmd": "show vmtracer session session_name vcenter [INFO_LEVEL]",
    "desc": "The show vmtracer session vcenter command displays vCenter information for a specified VM Tracer session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "abcde",
    "cmd": "abcde",
    "desc": "https://vmware-vcenter5."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "sec",
    "cmd": "show vmtracer [INT_NAME] vm [VM_LIST]",
    "desc": "/api/2.0/vdn/scopes 0:00:00 ago /api/2.0/vdn/config/segments 10 days, 1:15:29 ago CURLE_COULDNT_RESOLVE_HOST - Couldn't resolve host The given remote host was not resolved. show vmtracer vm The show vmtracer vm command displays VMs interfaces (Vnics)…"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "vCenter2",
    "cmd": "vCenter2",
    "desc": "998"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "vCenter3",
    "cmd": "vCenter3",
    "desc": "998"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "vCenter4",
    "cmd": "vCenter4",
    "desc": "998"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show vmtracer vm detail",
    "cmd": "show vmtracer vm [VM_LIST] detail",
    "desc": "The show vmtracer vm detail command displays connection data for VMs interfaces (Vnics) accessible to VM Tracer enabled interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show vmtracer vnic counters",
    "cmd": "show vmtracer [ENTITY] vnic counters",
    "desc": "The show vmtracer interface vnic counters command displays input and output packet counts for VM interfaces (Vnics) active on the specified interface or VM."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vmtracer vxlan segment",
    "cmd": "show vmtracer segment ENTITY",
    "desc": "The show vmtracer vxlan segment command displays information about the VXLAN segments that are managed by the connected NSX for vSphere® (NSX-V)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "abcde switch>",
    "cmd": "abcde switch>",
    "desc": "• This command displays the resource pools available to the VXLANs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "show vmtracer vxlan vm",
    "cmd": "show vmtracer vxlan vm",
    "desc": "The show vmtracer vxlan vm command displays the VXLAN segments, their VTEP IP numbers, and their VM endpoints that are managed by the connected NSX for vSphere® (NSX-V)."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "source-interface",
    "cmd": "source-interface [INTERFACE_NAME]\nno source-interface\ndefault source-interface",
    "desc": "The source-interface command allows you to connect to a remote vCenter endpoint by using the primary address of the interface as the source IP address."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "url (vmtracer mode)",
    "cmd": "url url_name",
    "desc": "The url command specifies the vCenter server location that is monitored by the session being edited by the current vmtracer mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "AAA",
    "title": "username",
    "cmd": "username name_string",
    "desc": "The username command identifies the switch account name on the vCenter server."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "vmtracer",
    "cmd": "vmtracer HOST_TYPE\nno vmtracer HOST_TYPE\ndefault vmtracer HOST_TYPE",
    "desc": "The vmtracer command enables vmtracer mode on the configuration mode interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "vmtracer session",
    "cmd": "vmtracer session name\nno vmtracer session name\ndefault vmtracer session name",
    "desc": "The vmtracer session command places the switch in the vmtracer mode for the specified session."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "VLAN",
    "title": "vxlan",
    "cmd": "vxlan\nno vxlan\ndefault vxlan",
    "desc": "The vxlan command places the switch in the vmtracer-vxlan configuration mode."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "clear monitor hadoop burst-counters",
    "cmd": "clear monitor hadoop burst-counters [clusters]",
    "desc": "The clear monitor hadoop burst-counters command resets MapReduce Tracer burst counters for all jobs running on specified clusters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "clear monitor hadoop job-history",
    "cmd": "clear monitor hadoop job-history [clusters]",
    "desc": "The clear monitor hadoop job-history command resets the job history database for all specified clusters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "cluster (Monitor Hadoop)",
    "cmd": "cluster cluster_name\nno cluster cluster_name\ndefault cluster cluster_name",
    "desc": "The cluster command is a monitor-hadoop command that places the switch in the monitor-hadoopcluster mode for configuring and enabling a MapReduce Tracer monitor for a Hadoop cluster."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "interval (Monitor Hadoop Cluster)",
    "cmd": "interval period\nno interval\ndefault interval",
    "desc": "The interval command specifies the polling interval between queries to the Hadoop cluster JobTracker specifed by configuration mode statements."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "jobtracker (Monitor Hadoop Cluster)",
    "cmd": "jobtracker [location][port][user]\nno jobtracker[location][port][user]\ndefault jobtracker [location][port][user]",
    "desc": "The jobtracker command specifies JobTracker access parameters for the cluster monitored by configuration mode monitor statements."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor hadoop",
    "cmd": "monitor hadoop\nno monitor hadoop\ndefault monitor hadoop",
    "desc": "The monitor hadoop command places the switch in the Monitor-Hadoop Configuration Mode for configuring MapReduce Tracer monitors."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show agent oom scores",
    "cmd": "show agent [ agentName] oom scores",
    "desc": "The show agent oom scores command displays information for each agent if specified."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor hadoop",
    "cmd": "show monitor hadoop",
    "desc": "The show monitor hadoop command displays a list of jobs that are running on all monitored Hadoop clusters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor hadoop cluster all",
    "cmd": "show monitor hadoop cluster all",
    "desc": "The show monitor hadoop cluster all command displays configuration and connection information for all monitored Hadoop clusters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor hadoop cluster counters",
    "cmd": "show monitor hadoop cluster c_name counters",
    "desc": "The show monitor hadoop cluster counters command displays a list of jobs running on the specified Hadoop cluster and data consumption associated with these jobs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor hadoop cluster history",
    "cmd": "show monitor hadoop cluster c_name history",
    "desc": "The show monitor hadoop cluster history command displays all jobs that ran on the specified cluster."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor hadoop cluster history jobs",
    "cmd": "show monitor hadoop cluster c_name history jobs job_number",
    "desc": "The show monitor hadoop cluster history jobs command displays data about the specified job."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor hadoop cluster jobs",
    "cmd": "show monitor hadoop cluster c_name jobs",
    "desc": "The show monitor hadoop cluster jobs command displays a list of jobs that are running on the specified cluster."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor hadoop cluster jobs counter",
    "cmd": "show monitor hadoop cluster c_name [jobs job_number] counter",
    "desc": "The show monitor hadoop cluster jobs counter command displays data consumption and progress statistics for the specified job."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor hadoop cluster jobs <job number>",
    "cmd": "show monitor hadoop cluster c_name [jobs job_number]",
    "desc": "The show monitor hadoop cluster jobsjob number command displays information about the specified job."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor hadoop cluster status",
    "cmd": "show monitor hadoop cluster c_name status",
    "desc": "The show monitor hadoop cluster status command displays configuration and connection information for the specified cluster."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor hadoop cluster tasktracker",
    "cmd": "show monitor hadoop cluster c_name tasktracker",
    "desc": "The show monitor hadoop cluster tasktracker command displays a list of TaskTrackers in the specified cluster."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor hadoop counters",
    "cmd": "show monitor hadoop counters",
    "desc": "The show monitor hadoop counters command displays byte counter data for all jobs running on clusters for which MapReduce Tracer is configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor hadoop history",
    "cmd": "show monitor hadoop history",
    "desc": "The show monitor hadoop history command displays jobs that ran on clusters for which MapReduce Tracer is configured."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor hadoop status",
    "cmd": "show monitor hadoop status",
    "desc": "The show monitor hadoop status command displays system status for MapReduce Tracer."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor hadoop tasktracker all",
    "cmd": "show monitor hadoop tasktracker all",
    "desc": "The show monitor hadoop tasktracker all command displays a list of TaskTrackers that are on all monitored Hadoop clusters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor hadoop tasktracker all counters",
    "cmd": "show monitor hadoop tasktracker all counters",
    "desc": "The show monitor hadoop tasktracker all counters command displays byte counters for the TaskTrackers of all monitored Hadoop clusters."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor hadoop tasktracker counters",
    "cmd": "show monitor hadoop tasktracker NODES counters",
    "desc": "The show monitor hadoop tasktracker counters command displays a list of jobs running on the specified TaskTracker and output from byte counters associated with these jobs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor hadoop tasktracker jobs",
    "cmd": "show monitor hadoop tasktracker NODES jobs [CLUSTERS]",
    "desc": "The show monitor hadoop tasktracker jobs command displays data about the jobs that are running on TaskTrackers located on the specified node or accessed through the listed interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor hadoop tasktracker running-tasks",
    "cmd": "show monitor hadoop tasktracker NODES running-tasks [CLUSTERS][JOBS]",
    "desc": "The show monitor hadoop tasktracker running-tasks command displays progress and byte counts of tasks executed by TaskTrackers located on the specified node or accessed through the listed interfaces."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor hadoop tasktracker running-tasks cluster job task",
    "cmd": "show monitor hadoop tasktracker NODE [running-tasks cluster name][ job jnum ][task tnum]",
    "desc": "The show monitor hadoop tasktracker running-tasks cluster job task command displays detailed data for the specified task."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor hadoop tasktracker status",
    "cmd": "show monitor hadoop cluster c_name tasktracker status\nshow monitor hadoop tasktracker NODES status\nshow monitor hadoop tasktracker all status",
    "desc": "The show monitor hadoop tasktracker status command displays connection and activity information for the TaskTracker on the specified clusters or accessed through the specified interface."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor hadoop traffic burst",
    "cmd": "show monitor hadoop [CLUSTERS] traffic burst [NODE]",
    "desc": "The show monitor hadoop traffic burst command displays the largest data bursts for specified Hadoop cluster jobs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "show monitor system",
    "cmd": "show monitor system",
    "desc": "The show monitor system command displays information about the memory usage status of the system including when low-memory situations have led to Out-Of-Memory (OOM) events."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "tasktracker (Monitor Hadoop Cluster)",
    "cmd": "tasktracker http-port port_number\nno tasktracker http-port\ndefault tasktracker http-port",
    "desc": "The tasktracker command specifies the HTTP port for accessing TaskTrackers of the Hadoop cluster monitored through configuration mode statements."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "mA",
    "cmd": "mA",
    "desc": "35.00"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "performance-monitoring period",
    "cmd": "performance-monitoring period period\nno performance-monitoring period period",
    "desc": "The performance-monitoring period command configures Performance Monitoring Period across the system."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "performance-monitoring transceiver",
    "cmd": "performance-monitoring transceiver\nno performance-monitoring transceiver",
    "desc": "The performance-monitoring transceiver command enable Performance Monitoring on a per interface basis."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "performance-monitoring transceiver default",
    "cmd": "performance-monitoring transceiver default\nno performance-monitoring transceiver default",
    "desc": "The performance-monitoring transceiver default command enable Performance Monitoring on all interfaces across the system."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show interfaces transceiver dom",
    "cmd": "show interfaces interface transceiver dom",
    "desc": "The show interfaces transceiver dom command displays the Digital Optical Monitoring (DOM) parameters from the CLI."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces transceiver dom thresholds",
    "cmd": "show interfaces interface transceiver dom thresholds",
    "desc": "The show interfaces transceiver dom thresholds command displays the Digital Optical Monitoring (DOM) parameters and thresholds."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show interfaces transceiver performance-monitoring",
    "cmd": "show interfaces interface transceiver performance-monitoring",
    "desc": "The show interfaces transceiver performance-monitoring command displays the performance monitoring statistics from the CLI."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "System",
    "title": "show interfaces transceiver dom thresholds",
    "cmd": "show interfaces interface transceiver dom [thresholds] [unclipped]",
    "desc": "The show interfaces transceiver dom thresholds command displays the Digital Optical Monitoring (DOM) parameters and thresholds."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "Show Commands",
    "cmd": "show monitor security awake",
    "desc": "• The following CLI command display the status of the Monitor security Awake feature: switch# show monitor security awake [nucleus <nucleus>]"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor security awake",
    "cmd": "monitor security awake\nno monitor security awake\ndefault monitor security awake",
    "desc": "When the monitor security awake command is enabled the FlowWatcher agent enables Hardware flow tracking with filter-based packet sampling, IP/IPv6 access lists, and mirroring features to receive the first"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor security awake",
    "cmd": "show monitor security awake [nucleus nucleus]",
    "desc": "The show monitor security awake command displays the status of the Monitor Security Awake feature on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor security awake counters",
    "cmd": "show monitor security awake counters [flows | ipfix | nucleus nucleus]",
    "desc": "The show monitor security awake counters command displays the various counters of the Monitor Security Awake feature on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "client host",
    "cmd": "monitor connectivity [clientclient_name | vrf vrf_name] host host_name",
    "desc": "The monitor connectivity client host command configures clients to accept connectivity probes from a host."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "client interval",
    "cmd": "client interval interval",
    "desc": "The client interval command configures the interval between probes on a client."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "client loss-threshold",
    "cmd": "client loss-threshold count probes",
    "desc": "The client loss-threshold command configures the sequential lost probe count threshold on a client."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "host description",
    "cmd": "host description description\nvrf description description",
    "desc": "The host description command configures a brief description of the host."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "host ip",
    "cmd": "host ip [ipv4_address | ipv6_address] [ hostname host_name resolution [ipv4 | ipv6]]",
    "desc": "The host ip command configures the endpoint for ICMP probing on the host."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "host tcp",
    "cmd": "host ip [ipv4_address | ipv6_address] tcp port port_number resolution [ipv4 | ipv6]]",
    "desc": "The host tcp command configures a TCP probe for Connectivity Monitoring."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "host url",
    "cmd": "host url url",
    "desc": "The host url command configures a URL for the host."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor connectivity",
    "cmd": "monitor connectivity",
    "desc": "The monitor connectivity command enters the Connectivity Monitor Configuration Mode on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor connectivity client",
    "cmd": "monitor connectivity client client_name",
    "desc": "The monitor connectivity client command enters the Connectivity Monitor Client Configuration Mode on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor connectivity description",
    "cmd": "host host_name description description\nvrf vrf_name description description",
    "desc": "The monitor connectivity description command configures a brief description of the host or VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor connectivity icmp echo qos dscp",
    "cmd": "icmp echo qos dscp dscp_value\nclient client_name icmp echo qos dscp dscp_value",
    "desc": "The monitor connectivity icmp echo qos dscp command configures DSCP bit on a host or client to classify and manage network traffic such as prioritizing packets when network congestion occurs."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor connectivity host",
    "cmd": "monitor connectivity host host_name",
    "desc": "The monitor connectivity host command enters the Connectivity Monitor Host Configuration Mode on a switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor connectivity icmp",
    "cmd": "icmp count ping_count\nclient client_name ] icmp count ping_count\nhosthost_name icmp count ping_count",
    "desc": "The monitor connectivity icmp command configures ICMP ping parameters globally, on a host, or a client."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor connectivity icmp threshold",
    "cmd": "monitor connectivity [ icmp | http | tcp] threshold latency value [milliseconds\nno monitor connectivity [ icmp | http | tcp] threshold latency",
    "desc": "The monitor connectivity icmp threshold command in the Connectivity Monitor Configuration Mode enables latency thresholds for a host or client ICMP, HTTP, or TCP probes."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "EtherChannel",
    "title": "monitor connectivity interface",
    "cmd": "interface set set_name [Dps | Ethernet | Fabric | InternalRecirc | Loopback |\nManagement | Port-Channel | Recirc-Channel | Tunnel | Vlan | Vxlan] interface\nvrf vrf_nameinterface set set_name [Dps | Ethernet | Fabric | InternalRecirc\nVxlan] interface",
    "desc": "The monitor connectivity interface command configures a collection of interfaces used as a source interface for probing."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor connectivity interval",
    "cmd": "interval count\nclient client_name interval count",
    "desc": "The monitor connectivity interval command configures the interval between probes globally or on a client."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor connectivity local-interfaces",
    "cmd": "local-interfaces interface_sets address-only default\nvrf vrf_name local-interfaces interface_sets address-only default",
    "desc": "The monitor connectivity local-interfaces command configures the default interface set for ICMP probing globally, on the host, or on a VRF."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "NTP",
    "title": "monitor connectivity loss-threshold",
    "cmd": "loss-threshold countprobes\nclient client_name loss-threshold count probes",
    "desc": "The monitor connectivity loss-threshold command configures the sequential lost probe count threshold globally or on a client."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor connectivity name-server",
    "cmd": "name-server group group_name\nclientclient_name name-server group group_name",
    "desc": "The monitor connectivity name-server command configures the IP address of a DNS name server on a host or a client to resolve hostnames."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "monitor connectivity vrf",
    "cmd": "monitor connectivity vrf vrf_name",
    "desc": "The monitor connectivity vrf command to configure a specific VRF to use default probing for hosts."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "no icmp echo",
    "cmd": "no icmp echo disabled",
    "desc": "The no icmp echo command disables ICMP probes on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "show monitor connectivity",
    "cmd": "show monitor connectivity [host host_name]",
    "desc": "The show monitor connectivity command displays information about the Connectivity Monitor status and configuration on the switch."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "ms n/a",
    "cmd": "ms n/a",
    "desc": "Host: hostlocal Network Statistics: IP Address Local Interface Latency Jitter Packet Loss ---------------- --------------------- ------------- ------------- ----------127."
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "ms 0.001 ms",
    "cmd": "ms 0.001 ms",
    "desc": "0% n/a"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "none",
    "cmd": "none",
    "desc": "Ethernet60/2"
  },
  {
    "os": "eos",
    "role": "switch",
    "vendor": "Arista",
    "cat": "Troubleshooting",
    "title": "ms 0.002 ms",
    "cmd": "ms 0.002 ms",
    "desc": "0% n/a HTTP statistics: http://localhost Local Interface Response Time Probe Error --------------- ------------- ----------none"
  }
]