[ { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Switch>", "cmd": "Switch> # User EXEC mode\nSwitch> enable # Privileged EXEC mode\nSwitch# configure terminal # Global config mode\nSwitch(config)# interface fa0/1\nSwitch(config-if)# description Uplink-to-Router", "desc": "Configuration Modes" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show running-config", "cmd": "show running-config # Displays the active configuration in RAM\nshow startup-config # Displays the saved config in NVRAM (loaded on boot)\nshow vlan brief # Lists VLANs, names, status, and assigned ports\nshow interfaces status # Shows interface status (UP/DOWN, VLAN, speed, duplex)\nshow mac address-table # Displays learned MAC addresses and their ports\nshow spanning-tree # Shows STP information (root bridge, port roles/states)", "desc": "Important show Commands" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show running-config | include vlan", "cmd": "show running-config | include vlan # Show only lines containing \"vlan\"\nshow interfaces | begin GigabitEthernet0/1 # Display output starting from Gi0/1\nshow mac address-table | exclude dynamic # Hide all lines with the word \"dynamic\"", "desc": "Filtering Information from show Commands" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface range gi0/1 - 10", "cmd": "interface range gi0/1 - 10 # Select multiple interfaces at once (Gi0/1 to Gi0/10)\nswitchport mode access # Set all selected ports to access mode\nswitchport access vlan 20 # Assign VLAN 20 to all selected ports", "desc": "Managing Multiple Interfaces" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vlan 10", "cmd": "vlan 10 # Create VLAN 10\nname VLAN10 # Assign a name (\"VLAN10\") to the VLAN\nexit # Exit VLAN configuration mode", "desc": "VLANs > Creating VLANs" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "no vlan 10", "cmd": "no vlan 10 # Delete VLAN 10\ndelete flash:vlan.dat # Delete the entire VLAN database from flash", "desc": "VLANs > Deleting VLANs" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface gi0/1", "cmd": "interface gi0/1 # Enter interface Gi0/1\nswitchport mode access # Set port as access\nswitchport access vlan 10 # Assign VLAN 10 to the port", "desc": "VLANs > Assigning Interfaces to a VLAN (Access)" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface gi0/24", "cmd": "interface gi0/24 # Enter trunk interface (Gi0/24)\nswitchport mode trunk # Set port as trunk\nswitchport trunk allowed vlan 10,20,30 # Allow only VLANs 10, 20, and 30\nswitchport trunk native vlan 99 # Set VLAN 99 as the native VLAN", "desc": "Trunks > Configuring Trunks" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport mode dynamic desirable", "cmd": "switchport mode dynamic desirable # Actively try to form a trunk\nswitchport mode dynamic auto # Passively form a trunk if other side is trunk/desirable\nswitchport nonegotiate # Disable DTP negotiation", "desc": "Trunks > Dynamic Trunking Protocol (DTP)" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vlan brief", "cmd": "show vlan brief # Display all VLANs and their assigned ports\nshow interfaces trunk # Verify trunk ports and allowed VLANs\nshow mac address-table # View MAC addresses learned on the switch\nshow running-config # Check VLAN and interface configurations", "desc": "VLAN Troubleshooting" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface gi0/5", "cmd": "interface gi0/5 # Enter interface Gi0/5\nswitchport mode access # Set port as access\nswitchport access vlan 10 # Assign VLAN 10 for data\nswitchport voice vlan 20 # Assign VLAN 20 for voice traffic (IP phones)", "desc": "Voice VLANs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "hostname Switch1", "cmd": "hostname Switch1 # Set device hostname \nip domain-name example.com # Define domain name (needed for RSA key) \ncrypto key generate rsa # Generate RSA keys for SSH \nusername admin privilege 15 secret cisco123 # Create local admin user \nline vty 0 4 # Enter VTY line configuration (remote access) \n transport input ssh # Allow only SSH (disable Telnet) \n login local # Use local user database for login", "desc": "SSH > Initial SSH Setup" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "ip ssh version 2", "cmd": "ip ssh version 2 # Enable SSH version 2 (more secure) \nip ssh time-out 60 # Set SSH idle timeout to 60 seconds \nip ssh authentication-retries 3 # Allow max 3 login attempts", "desc": "SSH > Modifying SSH Config" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface gi0/2", "cmd": "interface gi0/2 # Enter interface \nswitchport mode access # Set interface to access mode \nswitchport port-security # Enable port security \nswitchport port-security maximum 2 # Allow max 2 MAC addresses \nswitchport port-security violation shutdown # Shutdown port if violation occurs", "desc": "Port Security > Dynamic Port Security" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface gi0/2", "cmd": "interface gi0/2 # Enter interface \nswitchport port-security mac-address sticky # Learn & save MAC addresses dynamically", "desc": "Port Security > Sticky Port Security" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "show port-security interface gi0/2", "cmd": "show port-security interface gi0/2 # Check security settings for interface \nshow port-security address # View secure MAC addresses learned", "desc": "Port Security > Verifying Port Security" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "show interface status err-disabled", "cmd": "show interface status err-disabled # Show interfaces in error-disabled state \nerrdisable recovery cause psecure-violation # Enable automatic recovery for port-security violations \nerrdisable recovery interval 300 # Set recovery interval (300 seconds)", "desc": "Port Security > Err-Disabled Interfaces" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vtp mode server", "cmd": "vtp mode server # Set switch as VTP server (can create/modify VLANs) \nvtp domain CCNA-Lab # Define VTP domain name (must match across switches) \nvtp password cisco123 # Set a password for VTP updates", "desc": "VLAN Trunking Protocol > Configuring VTP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vtp status", "cmd": "show vtp status # Display VTP mode, domain, and revision number", "desc": "VLAN Trunking Protocol > VTP Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "CDevice>enable", "cmd": "CDevice>enable", "desc": " | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "CDevice#configure terminal", "cmd": "CDevice#configure terminal", "desc": " | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "CDevice(config)#no ip domain-lookup", "cmd": "CDevice(config)#no ip domain-lookup", "desc": " | disable DNS lookup" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "CDevice(config)#line console 0", "cmd": "CDevice(config)#line console 0", "desc": " | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Logging", "title": "CDevice(config-line)#logging synchronous", "cmd": "CDevice(config-line)#logging synchronous", "desc": " | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "CDevice(config-line)#history size [lines]", "cmd": "CDevice(config-line)#history size [lines]", "desc": " | specify the size (number of lines) for the history of executed commands (you can view your history with `R1#show history`)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "CDevice(config-line)#exec-timeout [minutes] [seconds]", "cmd": "CDevice(config-line)#exec-timeout [minutes] [seconds]", "desc": " | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "CDevice(config-line)#end", "cmd": "CDevice(config-line)#end", "desc": " | exit to EXEC privileged mode, where the next command will be executed" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "CDevice#copy running-config startup-config", "cmd": "CDevice#copy running-config startup-config", "desc": " | Saves the running configuration to the NVRAM" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Logging", "title": "ena", "cmd": "ena\nconf t\nno ip domain-lookup\ncdp run\nline con 0\nlogging syn\nhis size 50\nexec-timeout 25 0\nend\ncopy run start", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "erase startup-config", "cmd": "erase startup-config\ndelete vlan.dat\nreload", "desc": "Basic Networking > Setup > Intialize" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Logging", "title": "configure terminal", "cmd": "configure terminal\nno ip domain-lookup\nhostname S1\nline console 0\nlogging synchronous\nexit\nbanner motd $ Authorized Access Only! And Godzilla will beat Kong any day $\nexit\ncopy running-config startup-config", "desc": "Basic Networking > Setup > Basic Switch Config" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Logging", "title": "configure terminal", "cmd": "configure terminal\nno ip domain-lookup\nhostname R1\nline console 0\nlogging synchronous\nexit\nbanner motd $ Authorized Access Only! And Godzilla will beat Kong any day $\nexit\ncopy running-config startup-config", "desc": "Basic Networking > Setup > Basic Router Config" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Logging", "title": "configure terminal", "cmd": "configure terminal\nno ip domain-lookup\nhostname R1\nline console 0\nlogging synchronous\nexit\nbanner motd $ Authorized Access Only! And Godzilla will beat Kong any day $\nexit\ncopy running-config startup-config\nconf t\nenable secret class\nline console 0\npassword cisco\nlogin\nexit\nline vty 0 4\npassword cisco\nlogin\nexit\nservice password-encryption\nend\ncopy running-config startup-config", "desc": "Basic Networking > Setup > Basic Config with Password Security" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "conf t", "cmd": "conf t\nenable secret class\nline console 0\npassword cisco\nlogin\nexit\nline vty 0 4\npassword cisco\nlogin\nexit\nservice password-encryption\nend", "desc": "Basic Networking > Setup > Basic Security" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "show ip ssh", "cmd": "show ip ssh\nconf t\nip domain-name cisco.com\ncrypto key generate rsa", "desc": "Basic Networking > Setup > Configure SSH" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "username admin secret ccna", "cmd": "username admin secret ccna\nline vty 0 15\ntransport input ssh\nlogin local\nexit\nip ssh version 2\nexit", "desc": "Basic Networking > Setup > Configure SSH" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NTP", "title": "show clock", "cmd": "show clock", "desc": "Basic Networking > Setup > Set Clock" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "ip ssh time-out 60", "cmd": "ip ssh time-out 60\nip ssh authentication-retries 3\nend", "desc": "Basic Networking > Setup > Basic Hardening (Work Needed)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "copy running-config startup-config", "cmd": "copy running-config startup-config\ncopy startup-config ftp://192.168.1.10/config.txt", "desc": "Basic Networking > Setup > Backup config over FTP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "copy ftp://192.168.1.10/config.txt running-config", "cmd": "copy ftp://192.168.1.10/config.txt running-config", "desc": "Basic Networking > Setup > Restore Config" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "conf t", "cmd": "conf t\nint f0/1\nip addr 192.168.10.11 255.255.255.0\nend", "desc": "Basic Networking > Interfaces > Interface Selection" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "cont t", "cmd": "cont t\nint g0/0\nip addr 10.0.0.10 255.255.255.0", "desc": "Basic Networking > Interfaces > Assign Static IP to Interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nint range f0/1-12\nswitchport mode access\nswitch access vlan 10\nend", "desc": "Basic Networking > Interfaces > Interface Ranges" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nint range f0/13-24\nswitchport mode access\nswitchport access vlan 20\nend", "desc": "Basic Networking > Interfaces > Interface Ranges" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nint range f0/1-4,g0/1,f0/16-20\nswitchport mode access\nswitchport access vlan 10\nend", "desc": "Basic Networking > Interfaces > Interface Ranges" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "show ip interface brief", "cmd": "show ip interface brief", "desc": "Basic Networking > Interface Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "show ip int br", "cmd": "show ip int br", "desc": "Basic Networking > Interface Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "conf t", "cmd": "conf t\nint f0/1\nno ip addr\nend", "desc": "Basic Networking > Interface Verification > Remove IP Addresses" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "conf t", "cmd": "conf t\nip domain name cisco.com\nip dhcp excluded-address 10.0.0.1\nip dhcp pool test\nnetwork 10.0.0.0 255.255.255.0\ndefault-router 10.0.0.1\nend", "desc": "Basic Networking > DHCP > Snippet Enable Router DHCP Server" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "ip dhcp pool test", "cmd": "ip dhcp pool test\nnetwork 10.0.0.0 255.255.255.0\ndomain-name cisco.com\ndefault-router 10.0.0.1\ndns-server 10.0.0.1\nlease 4\nip dhcp snooping\nip dhcp-server 10.0.0.3\ninterface vlan 1\nip address 10.0.0.3", "desc": "Basic Networking > DHCP > Snippet Enable Switch DHCP Server" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "conf t", "cmd": "conf t\nip domain name cisco.com\nip dhcp excluded-address 10.0.0.1\nip dhcp pool managementpool\nnetwork 10.0.0.1 255.255.255.0\ndefault-router 10.0.0.1\nend", "desc": "Basic Networking > DHCP > Create DHCP Pool" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "conf t", "cmd": "conf t\nip dhcp excluded-address 192.168.10.1\nip dhcp excluded-address 192.168.10.254\nip dhcp pool office-pool-1\nnetwork 192.168.10.0 255.255.255.0\ndefault-router 192.168.10.1\ndns-server 192.168.5.5\ndomain-name linux.org\nend", "desc": "Basic Networking > DHCP > Create DHCP Pool" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show running-config | section dhcp", "cmd": "show running-config | section dhcp\nshow ip dhcp binding\nshow ip dhcp server statistics", "desc": "Basic Networking > DHCP > DHCP Verification" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nvlan 10\nname Management\nvlan 20\nname Sales\nvlan 30\nname Operations\nend", "desc": "Basic Networking > DHCP > Create VLAN DHCP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nint vlan 10\nip address 192.168.10.254 255.255.255.0\nip default-gateway 192.168.10.1\nno shut", "desc": "Basic Networking > DHCP > Create VLAN DHCP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "int vlan 20", "cmd": "int vlan 20\nip address 192.168.20.254 255.255.255.0\nip default-gateway 192.168.20.1\nno shut", "desc": "Basic Networking > DHCP > Create VLAN DHCP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "int vlan 30", "cmd": "int vlan 30\nip address 192.168.30.254 255.255.255.0\nip default-gateway 192.168.30.1\nno shut\nend", "desc": "Basic Networking > DHCP > Create VLAN DHCP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nint range f0/1-7\nswitchport mode access\nswitchport access vlan 10", "desc": "Basic Networking > DHCP > Create VLAN DHCP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "int range f0/8-15", "cmd": "int range f0/8-15\nswitchport mode access\nswitchport access vlan 20", "desc": "Basic Networking > DHCP > Create VLAN DHCP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "int range f0/16-24", "cmd": "int range f0/16-24\nswitchport mode access\nswitchport access vlan 30\nend", "desc": "Basic Networking > DHCP > Create VLAN DHCP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nip domain name cisco.com\nip dhcp excluded-address 192.168.10.1\nip dhcp pool vlan10pool\nnetwork 192.168.10.0 255.255.255.0\ndefault-router 192.168.10.1\nimport all", "desc": "Basic Networking > DHCP > Create VLAN DHCP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "ip dhcp excluded-address 192.168.20.1", "cmd": "ip dhcp excluded-address 192.168.20.1\nip dhcp pool vlan20pool\nnetwork 192.168.20.0 255.255.255.0\ndefault-router 192.168.20.1\nimport all", "desc": "Basic Networking > DHCP > Create VLAN DHCP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "ip dhcp excluded-address 192.168.30.1", "cmd": "ip dhcp excluded-address 192.168.30.1\nip dhcp pool vlan30pool\nnetwork 192.168.30.0 255.255.255.0\ndefault-router 192.168.30.1\nimport all\nend", "desc": "Basic Networking > DHCP > Create VLAN DHCP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show ip dhcp pool", "cmd": "show ip dhcp pool", "desc": "Basic Networking > DHCP > Verify DHCP Pool" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "conf t", "cmd": "conf t\nno ip dhcp pool managementpool\nend", "desc": "Basic Networking > DHCP > Delete DHCP Pool" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nvlan 10\nname Faculty\nexit", "desc": "Intermediate Networking > VLANs > VLAN Creation" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nvlan 20\nname Students\nexit", "desc": "Intermediate Networking > VLANs > VLAN Creation" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\ninterface range Fa0/1-12\nswitchport mode access\nswitchport access vlan 10\nend", "desc": "Intermediate Networking > VLANs > Port Assignment" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t interface range Fa0/13-24", "cmd": "conf t interface range Fa0/13-24\nswitchport mode access\nswitchport access vlan 20\nend", "desc": "Intermediate Networking > VLANs > Port Assignment" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\ninterface Gi0/1\nswitchport mode access\nswitchport access vlan 99\nend", "desc": "Intermediate Networking > VLANs > Port Assignment" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "cont t", "cmd": "cont t\nint vlan 99\nip address 10.0.0.1 255.255.255.0\nend", "desc": "Intermediate Networking > VLANs > IP Assignemnt" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vlan brief", "cmd": "show vlan brief", "desc": "Intermediate Networking > VLANs > Verification" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nint Fa0/4\nswitchport mode access\nswitchport access vlan 10\nswitchport voice vlan 20\nend", "desc": "Intermediate Networking > VLANs > Voice and Data VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nvlan 99\nname Management\nexit\ninterface Fa0/24\nswitchport mode access\nswitchport access vlan 99\nexit\nint vlan 99\nip addr 10.0.0.1 255.255.255.0\nend", "desc": "Intermediate Networking > VLANs > Management VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "delete vlan.dat", "cmd": "delete vlan.dat", "desc": "Intermediate Networking > VLANs > Delete VLANS on file" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nno vlan 10\nno vlan 20\nend", "desc": "Intermediate Networking > VLANs > Delete VLANS in memory" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Static", "title": "conf t", "cmd": "conf t\ninterface G0/0/1.10\ndescription Default Gateway for VLAN 10\nencapsulation dot1Q 10\nip add 192.168.10.1 255.255.255.0\nexit", "desc": "Intermediate Networking > VLANs > Inter-VLAN Routing" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Static", "title": "interface G0/0/1.20", "cmd": "interface G0/0/1.20\ndescription Default Gateway for VLAN 20\nencapsulation dot1Q 20\nip addr 192.168.20.1 255.255.255.0\nexit", "desc": "Intermediate Networking > VLANs > Inter-VLAN Routing" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Static", "title": "interface G0/0/1.99", "cmd": "interface G0/0/1.99\ndescription Default Gateway for VLAN 99\nencapsulation dot1Q 99\nip addr 192.168.99.1 255.255.255.0\nexit", "desc": "Intermediate Networking > VLANs > Inter-VLAN Routing" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface G0/0/1", "cmd": "interface G0/0/1\ndescription Trunk link to S1\nno shut\nend", "desc": "Intermediate Networking > VLANs > Inter-VLAN Routing" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\ninterface Gi0/1\ndescription Trunk Line to S2 Gi0/1\nswitchport mode trunk\nswitchport trunk native vlan 99\nswitchport trunk allowed vlan 99\nend", "desc": "Intermediate Networking > Trunks > Create multi-switch vlan trunk" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show interface trunk", "cmd": "show interface trunk\nshow interface g0/1 switchport", "desc": "Intermediate Networking > Trunks > Trunk Verification" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nint range f0/1-2\nchannel-group 1 mode active\nexit\nint port-channel 1\nswitchport mode trunk\nswitchport trunk allowed vlan 1,2,20", "desc": "Intermediate Networking > EtherChannel > Configure EtherChannel" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show interfaces trunk", "cmd": "show interfaces trunk\nshow etherchannel summary", "desc": "Intermediate Networking > EtherChannel > Verify EtherChannel" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nint gi0/1\nswitchport mode dynamic auto\nend", "desc": "Intermediate Networking > DTP (Dynamic Trunking Protocol) > Configure DTP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nint gi0/1\nswitchport mode dynamic desirable\nend", "desc": "Intermediate Networking > DTP (Dynamic Trunking Protocol) > Configure DTP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "conf t", "cmd": "conf t\nint gi0/1\nswitchport mode trunk\nswitchport nonegotiate\nend", "desc": "Intermediate Networking > DTP (Dynamic Trunking Protocol) > Disable DTP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show dtp interface gi0/1", "cmd": "show dtp interface gi0/1", "desc": "Intermediate Networking > DTP (Dynamic Trunking Protocol) > Verify DTP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf neighbor", "cmd": "show ip ospf neighbor\nshow ip ospf database", "desc": "Advanced Networking > OSPFv2 > OSPF Router IDs > All Commands" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "enable", "cmd": "enable\nconf t\nrouter ospf 10", "desc": "Advanced Networking > OSPFv2 > OSPF Router IDs > Enable router OSPF process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "enable", "cmd": "enable\nconf t\ninterface Loopback 1\nip addr 1.1.1.1 255.255.255.255\nend", "desc": "Advanced Networking > OSPFv2 > OSPF Router IDs > Configure Loopback" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\nrouter ospf 10\nrouter-id 1.1.1.1\nend", "desc": "Advanced Networking > OSPFv2 > OSPF Router IDs > Configure OSPF Router ID" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\nrouter ospf 10\nrouter-id 1.1.1.2\nend\nclear ip ospf process", "desc": "Advanced Networking > OSPFv2 > OSPF Router IDs > Modify OSPF router ID" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip proto | include Router ID", "cmd": "show ip proto | include Router ID", "desc": "Advanced Networking > OSPFv2 > OSPF Router IDs > Modify OSPF router ID" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\nrouter ospf 10\nnetwork 10.10.1.0 0.0.0.255 area 0\nnetwork 10.10.1.4 0.0.0.3 area 0\nnetwork 10.10.1.12 0.0.0.3 area 0\nend", "desc": "Advanced Networking > OSPFv2 > OSPF - Point-to-Point Networks > Configure OSPF With Network Command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\nrouter ospf 10\nnetwork 10.10.1.1 0.0.0.0 area 0\nnetwork 10.10.1.5 0.0.0.0 area 0\nnetwork 10.10.1.14 0.0.0.0 area 0\nend", "desc": "Advanced Networking > OSPFv2 > OSPF - Point-to-Point Networks > Use Entire Gigabit Interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "R1(config)# router ospf 10", "cmd": "R1(config)# router ospf 10\nR1(config-router)# no network 10.10.1.1 0.0.0.0 area 0\nR1(config-router)# no network 10.1.1.5 0.0.0.0 area 0\nR1(config-router)# no network 10.1.1.14 0.0.0.0 area 0\nR1(config-router)# interface GigabitEthernet 0/0/0\nR1(config-if)# ip ospf 10 area 0\nR1(config-if)# interface GigabitEthernet 0/0/1 \nR1(config-if)# ip ospf 10 area 0\nR1(config-if)# interface Loopback 0\nR1(config-if)# ip ospf 10 area 0\nR1(config-if)#", "desc": "Advanced Networking > OSPFv2 > OSPF - Point-to-Point Networks > Configure OSPF with ip ospf" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\nrouter ospf 10\npassive-interface loopback 0\nend", "desc": "Advanced Networking > OSPFv2 > OSPF - Point-to-Point Networks > OSPF Passive Interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\nrouter ospf 10\npassive-interface Gi0/0/0\nend", "desc": "Advanced Networking > OSPFv2 > OSPF - Point-to-Point Networks > OSPF Passive Interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf interface GigabitEthernet 0/0/0", "cmd": "show ip ospf interface GigabitEthernet 0/0/0", "desc": "Advanced Networking > OSPFv2 > OSPF - Point-to-Point Networks > Find Designated Router and Backup" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\ninterface GigabitEthernet 0/0/0\nip ospf network point-to-point", "desc": "Advanced Networking > OSPFv2 > OSPF - Point-to-Point Networks > Change OSPF from Broadcast to Point-to-Point" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\ninterface Loopback 0\nip ospf network point-to-point", "desc": "Advanced Networking > OSPFv2 > OSPF - Point-to-Point Networks > Loopback and P2P Networks" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip route | include 10.10.1", "cmd": "show ip route | include 10.10.1", "desc": "Advanced Networking > OSPFv2 > OSPF - Point-to-Point Networks > Loopback and P2P Networks" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\nint g0/0/1\nip ospf priority 255\nend", "desc": "Advanced Networking > OSPFv2 > Multiaccess OSPF Networks > Configure OSPF Priority" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router# router ospf 10", "cmd": "Router# router ospf 10\nRouter(config-router) auto-cost reference bandwidth 1000", "desc": "Advanced Networking > OSPFv2 > Modifying Single Area OSPF > Adjusting Reference Bandwidth" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\nint g0/0/1\nip ospf cost 25\ninterface l0\nip ospf cost 15\nend", "desc": "Advanced Networking > OSPFv2 > Modifying Single Area OSPF > Manually Set OSPF Link Cost" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf int g0/0/1", "cmd": "show ip ospf int g0/0/1", "desc": "Advanced Networking > OSPFv2 > Modifying Single Area OSPF > Show OSPF Hello Packet Intervals" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config-if)# ip ospf hello-interval ", "cmd": "Router(config-if)# ip ospf hello-interval ", "desc": "Advanced Networking > OSPFv2 > Modifying Single Area OSPF > Set OSPF Hello Packet Intervals" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\nint g0/0/1\nip ospf hello-interval 30\nend", "desc": "Advanced Networking > OSPFv2 > Modifying Single Area OSPF > Set OSPF Hello Packet Intervals" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\nip route 0.0.0.0 0.0.0.0 loopback 1\nrouter ospf 10\ndefault-information originate", "desc": "Advanced Networking > OSPFv2 > OSPF Default Routes > Propogate Default Route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip route | begin Gateway", "cmd": "show ip route | begin Gateway", "desc": "Advanced Networking > OSPFv2 > OSPF Default Routes > Verify Propogated Default Route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf neighbor", "cmd": "show ip ospf neighbor", "desc": "Advanced Networking > OSPFv2 > Verify Single-Area OSPF > Verify OSPF Neighbors" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip protocols", "cmd": "show ip protocols", "desc": "Advanced Networking > OSPFv2 > Verify Single-Area OSPF > Verify OSPF Protocols" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf", "cmd": "show ip ospf", "desc": "Advanced Networking > OSPFv2 > Verify Single-Area OSPF > Verify OSPF Process Info" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf int g0/0/1", "cmd": "show ip ospf int g0/0/1\nshow ip ospf int brief", "desc": "Advanced Networking > OSPFv2 > Verify Single-Area OSPF > Verify OSPF Interface Setting" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "conf t", "cmd": "conf t\nint g0/0/1\nip ospf dead-interval 100\nend", "desc": "Advanced Networking > OSPFv2 > Verify Single-Area OSPF > Verify OSPF Interface Setting" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Interface configuration Switch(config-if)", "cmd": "Interface configuration Switch(config-if)", "desc": "" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "VLAN configuration Switch(config-vlan)", "cmd": "VLAN configuration Switch(config-vlan)", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "show run interface ...", "cmd": "show run interface ...", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show run | begin ", "cmd": "show run | begin ", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show run | include ", "cmd": "show run | include ", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show run | section ", "cmd": "show run | section ", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "sh version", "cmd": "sh version", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show version", "cmd": "show version", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "configure", "cmd": "configure", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "debug snmp packet", "cmd": "debug snmp packet", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "no debug snmp packet", "cmd": "no debug snmp packet #disable debugging output, use the no form of this command.", "desc": "" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show interfaces vlan 1", "cmd": "show interfaces vlan 1", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "show interfaces status", "cmd": "show interfaces status #Show interface line status", "desc": "" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show interfaces vlan VLANID", "cmd": "show interfaces vlan VLANID # CIDR, network mask,make sure switch virtual interface (SVI) configured for each VLAN and that the SVI is in an up/up state.", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show arp | include x.x.x.x", "cmd": "show arp | include x.x.x.x # give you a MAC address which can be used to track down the host via the MAC address table", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show mac address-table | include aa11.bb22.cc33", "cmd": "show mac address-table | include aa11.bb22.cc33", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "sh version/show version", "cmd": "sh version/show version #Cisco IOS version etc", "desc": "" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vlan", "cmd": "show vlan", "desc": "" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vlan brief | include Gi1/X/X", "cmd": "show vlan brief | include Gi1/X/X", "desc": "" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vlan id 1-4,3,7,5-20", "cmd": "show vlan id 1-4,3,7,5-20", "desc": "" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vlan id 10 ifindex", "cmd": "show vlan id 10 ifindex", "desc": "" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vlan free", "cmd": "show vlan free", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "sh interfaces summary", "cmd": "sh interfaces summary", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "sh interfaces description", "cmd": "sh interfaces description", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "show ip access-lists", "cmd": "show ip access-lists #Displays IP ACLs configured on the switch.", "desc": "" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "sh vlan summary", "cmd": "sh vlan summary", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show flash", "cmd": "show flash", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show cdp neighbors detail", "cmd": "show cdp neighbors detail", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show startup-config", "cmd": "show startup-config #the config that is saved to NVRAM", "desc": "" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show running-config", "cmd": "show running-config #displays the config that is in the router RAM and the IOS is currently running on", "desc": "" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "System", "title": "clear:both;", "cmd": "clear:both;", "desc": "cmdref.net - Cheat Sheet and Example > Site Tools" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "System", "title": "switch> enable", "cmd": "switch> enable\nswitch# configure\nswitch(config)#", "desc": "Commands" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "System", "title": "veos> enable", "cmd": "veos> enable\nveos# bash", "desc": "Commands" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "EtherChannel", "title": "switch(config)#interface ethernet 1-2", "cmd": "switch(config)#interface ethernet 1-2\nswitch(config-if-Et1-2)#channel-group 10 mode active\nswitch(config-if-Et1-2)#show active", "desc": "Commands > Port Channel" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switch(config)#vlan 45", "cmd": "switch(config)#vlan 45\nswitch(config-vlan-45)#", "desc": "Commands > VLAN" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switch(config)#interface ethernet 5", "cmd": "switch(config)#interface ethernet 5\nswitch(config-if-Et5)#switchport access vlan 15\nswitch(config-if-Et5)#", "desc": "Commands > VLAN > Access Ports" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switch(config)#interface ethernet 12-16", "cmd": "switch(config)#interface ethernet 12-16\nswitch(config-if-Et12-16)#switchport trunk allowed vlan 15,20-22,40,75\nswitch(config-if-Et12-16)#", "desc": "Commands > VLAN > Trunk Ports" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switch(config)#interface ethernet 14", "cmd": "switch(config)#interface ethernet 14\nswitch(config-if-Et14)#switchport trunk allowed vlan add 100-120\nswitch(config-if-Et14)#", "desc": "Commands > VLAN > Trunk Ports" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "NAT", "title": "7150S#show ip nat translation static", "cmd": "7150S#show ip nat translation static\nSource IP Destination IP Translated IP TGT Type Intf\n----------------------------------------------------------------------------\n10.0.0.15:0 - 20.0.0.15:0 SRC STAT Et6", "desc": "Commands > NAT" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switch(config)#interface vlan 201", "cmd": "switch(config)#interface vlan 201\nswitch(config-if-Vl201)#ip nat source static 10.24.1.10 168.32.14.15\nswitch(config-if-Vl201)#", "desc": "Commands > NAT > Source NAT" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "sh vrf", "cmd": "sh vrf\nsh ip route vrf vrf1\nping vrf vrf2 192.168.204.1", "desc": "Commands > VRF" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "VLAN", "title": "interface Vlan301", "cmd": "interface Vlan301\n vrf forwarding vrf1\n ip address 30.0.1.254/24", "desc": "Commands > VRF" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "VLAN", "title": "interface Vlan401", "cmd": "interface Vlan401\n vrf forwarding vrf2\n ip address 40.0.1.254/24", "desc": "Commands > VRF" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "ip route vrf vrf1 40.0.1.0/24 30.0.2.1", "cmd": "ip route vrf vrf1 40.0.1.0/24 30.0.2.1\nip route vrf vrf2 30.0.1.0/24 40.0.12.1", "desc": "Commands > VRF" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "ip routing", "cmd": "ip routing\nip routing vrf vrf1\nip routing vrf vrf2", "desc": "Commands > VRF" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show lldb", "cmd": "show lldb\nno lldp run <- Disable LLDP", "desc": "Commands > LLDP" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "no spanning-tree 1-4097", "cmd": "no spanning-tree 1-4097", "desc": "Commands > Spanning-tree" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "ip routing", "cmd": "ip routing\nip multicast-routing", "desc": "Commands > Multicast > Enabling IPv4 Multicast Routing" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Interfaces", "title": "interface Ethernet1", "cmd": "interface Ethernet1\n ip pim sparse-mode", "desc": "Commands > Multicast > Enabling IPv4 Multicast Routing" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "ip pim rp-address 172.16.1.254", "cmd": "ip pim rp-address 172.16.1.254", "desc": "Commands > Multicast > Enabling IPv4 Multicast Routing" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "ip route 172.16.2.0/24 172.16.1.254", "cmd": "ip route 172.16.2.0/24 172.16.1.254", "desc": "Commands > Multicast > Enabling IPv4 Multicast Routing" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "switch(config)#router multicast", "cmd": "switch(config)#router multicast\nswitch(config-router-multicast)#ipv4\nswitch(config-router-multicast-ipv4)#routing", "desc": "Commands > Multicast > Enabling IPv4 Multicast Routing" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Allie(config-if-vl20)#interface vlan 21", "cmd": "Allie(config-if-vl20)#interface vlan 21\nAllie(config-if-vl21)#pim ipv4 sparse-mode\nAllie(config-if-vl21)#interface vlan 24\nAllie(config-if-vl24)#pim ipv4 sparse-mode\nAllie(config-if-vl24)#interface vlan 10\nAllie(config-if-vl10)#pim ipv4 sparse-mode", "desc": "Commands > Multicast > Enabling IPv4 Multicast Routing" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "Allie(config)#router multicast", "cmd": "Allie(config)#router multicast\nAllie(config-router-multicast)#ipv4\nAllie(config-router-multicast-ipv4)#routing\nAllie(config-router-multicast-ipv4)#activity polling-interval 5\nAllie(config-router-multicast-ipv4)#router pim sparse-mode\nAllie(config-router-pim-sparse)#ipv4\nAllie(config-router-pim-sparse-ipv4)#rp address 10.25.10.15", "desc": "Commands > Multicast > Enabling IPv4 Multicast Routing" }, { "os": "eos", "role": "firewall", "vendor": "Arista", "cat": "NTP", "title": "switch(config)#clock timezone US/Central", "cmd": "switch(config)#clock timezone US/Central\nswitch(config)#show clock\nMon Jan 14 18:42:49 2013\ntimezone is US/Central", "desc": "Commands > Clock(PTP)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 10 permit 10.10.10.2 0.0.0.0 ! source ip is 10.10.10.2", "cmd": "access-list 10 permit 10.10.10.2 0.0.0.0 ! source ip is 10.10.10.2", "desc": "ACL Image" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "int fa0/0", "cmd": "int fa0/0\n ip access-group 10 in", "desc": "ACL Image" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ip access-list standard vlan20-list", "cmd": "ip access-list standard vlan20-list\n deny 10.10.10.0 0.0.0.255 ! source ip is 10.10.10.0/24\n permit any", "desc": "ACL Image" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "Interface Vlan10", "cmd": "Interface Vlan10\n ip address 10.10.10.1 255.255.255.0", "desc": "ACL Image" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "Interface Vlan20", "cmd": "Interface Vlan20\n ip address 10.20.20.1 255.255.255.0\n ip access-group vlan20-list out", "desc": "ACL Image" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router# conf t", "cmd": "Router# conf t\nRouter(config)# ip access-list standard acl-test\nRouter(config-std-nacl)# permit 172.16.1.2\nRouter(config-std-nacl)# permit 172.16.1.3\nRouter(config-std-nacl)# exit", "desc": "How to confgire ACL with new way, Sequence Numbering > Standard ACL (Name,1-99) > 1.Create Standard ACL (Name,1-99)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router(config)# int Gi0/1", "cmd": "Router(config)# int Gi0/1\nRouter(config-if)# ip access-group acl-test in", "desc": "How to confgire ACL with new way, Sequence Numbering > Standard ACL (Name,1-99) > 2.Apply to Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router(config)#show ip access-list", "cmd": "Router(config)#show ip access-list", "desc": "How to confgire ACL with new way, Sequence Numbering > Standard ACL (Name,1-99) > Add Standard ACL (Name,1-99)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router(config)#ip access-list standard acl-test", "cmd": "Router(config)#ip access-list standard acl-test\nRouter(config-std-nac)#31 permit 192.168.20.0 0.0.0.255", "desc": "How to confgire ACL with new way, Sequence Numbering > Standard ACL (Name,1-99) > Add Standard ACL (Name,1-99)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router(config)#ip access-list standard acl-test", "cmd": "Router(config)#ip access-list standard acl-test\nRouter(config-std-nac)#no 30", "desc": "How to confgire ACL with new way, Sequence Numbering > Standard ACL (Name,1-99) > Delete Standard ACL (Name,1-99)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router# conf t", "cmd": "Router# conf t\nRouter(config)# ip access-list extended acl-test\nRouter(config-ext-nacl)# deny tcp host 172.16.1.2 172.16.2.0 0.0.0.255 eq telnet\n <- Deny From 172.16.1.2 To 172.16.2.0/24\nRouter(config-ext-nacl)# permit ip any any\nRouter(config-ext-nacl)# exit", "desc": "How to confgire ACL with new way, Sequence Numbering > Extended ACL(Name,100-199) > 1. Create Extended ACL(Name,100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router(config)#int Gi0/1", "cmd": "Router(config)#int Gi0/1\nRouter(config-if)#ip access-group acl-test in", "desc": "How to confgire ACL with new way, Sequence Numbering > Extended ACL(Name,100-199) > 2.Apply ACL to Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router(config)#ip access-list extended acl-test", "cmd": "Router(config)#ip access-list extended acl-test\nRouter(config-ext-nacl)#101 permit ip 192.168.20.0 0.0.0.255 any", "desc": "How to confgire ACL with new way, Sequence Numbering > Extended ACL(Name,100-199) > Add Extended ACL(Name,100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router(config)#ip access-list extended acl-test", "cmd": "Router(config)#ip access-list extended acl-test\nRouter(config-ext-nacl)#no 101", "desc": "How to confgire ACL with new way, Sequence Numbering > Extended ACL(Name,100-199) > Delete Extended ACL(Name,100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "deny tcp any host 192.168.2.2 eq 23 <- Deny telnet to F0/0", "cmd": "deny tcp any host 192.168.2.2 eq 23 <- Deny telnet to F0/0\ndeny tcp any host 192.168.3.2 eq 23 <- Deny telnet to F0/1\npermit ip any any <- Permit from any to any", "desc": "How to confgire ACL with new way, Sequence Numbering > Extended ACL(Name,100-199) > Examples of Extended ACL(Name,100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "from any to 192.168.0.0/16", "cmd": "from any to 192.168.0.0/16\ndeny tcp any 192.168.0.0 0.0.255.255 eq 23\npermit ip any any <- Permit from any to any", "desc": "How to confgire ACL with new way, Sequence Numbering > Extended ACL(Name,100-199) > Examples of Extended ACL(Name,100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "permit tcp host 192.168.1.1 host 192.168.2.2 eq 23 <- Permit teln...", "cmd": "permit tcp host 192.168.1.1 host 192.168.2.2 eq 23 <- Permit telnet to F0/0\npermit tcp host 192.168.1.1 host 192.168.3.2 eq 23 <- Permit telnet to F0/1\ndeny tcp any 192.168.0.0 0.0.255.255 eq 23\npermit ip any any <- Permit from any to any", "desc": "How to confgire ACL with new way, Sequence Numbering > Extended ACL(Name,100-199) > Examples of Extended ACL(Name,100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "deny tcp any host 172.16.1.1 eq www <- Deny from any to 172.1...", "cmd": "deny tcp any host 172.16.1.1 eq www <- Deny from any to 172.16.1.1\npermit ip any any <- Permit from any to any", "desc": "How to confgire ACL with new way, Sequence Numbering > Extended ACL(Name,100-199) > Examples of Extended ACL(Name,100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "permit tcp host 192.168.1.1 host 10.50.1.1 eq www <- Permit Fro...", "cmd": "permit tcp host 192.168.1.1 host 10.50.1.1 eq www <- Permit From 192.168.1.1 To 10.50.1.1\npermit ip 192.168.10.0 0.0.0.255 any <- Permit from 192.168.10.0/24 to any", "desc": "How to confgire ACL with new way, Sequence Numbering > Extended ACL(Name,100-199) > Examples of Extended ACL(Name,100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router# conf t", "cmd": "Router# conf t\nRouter(config)# access-list 1 deny 192.168.1.0 0.0.0.255\nRouter(config)# access-list 1 permit any", "desc": "How to confgire ACL with legacy way > Standard Access List (1-99) > 1.Create ACL" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router(config)# int Gi0/1", "cmd": "Router(config)# int Gi0/1\nRouter(config-if)# ip access-group 1 in", "desc": "How to confgire ACL with legacy way > Standard Access List (1-99) > 2.Apply to Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router(config)#no access-list 10", "cmd": "Router(config)#no access-list 10", "desc": "How to confgire ACL with legacy way > Standard Access List (1-99) > Delete ACL" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 1 deny 192.168.1.0 0.0.0.255 <- deny from 192.168.1...", "cmd": "access-list 1 deny 192.168.1.0 0.0.0.255 <- deny from 192.168.1.0/24\naccess-list 1 deny 192.168.1.0 0.0.255.255 <- deny from 192.168.0.0/16\naccess-list 1 permit any <- permit from any", "desc": "How to confgire ACL with legacy way > Standard Access List (1-99) > Examples of Standard ACL (1-99)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router# conf t", "cmd": "Router# conf t\nRouter(config)#access-list 100 deny tcp 192.168.1.0 0.0.0.255 host 192.168.2.2 eq www <- from 192.168.1.0/24\nRouter(config)#access-list 100 permit ip any any", "desc": "How to confgire ACL with legacy way > Extended Access List (100-199) > 1.Create ACL" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Router(config)#int Gi0/1", "cmd": "Router(config)#int Gi0/1\nRouter(config-if)#ip access-group 100 in", "desc": "How to confgire ACL with legacy way > Extended Access List (100-199) > 2.Apply ACL to Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 100 deny tcp any host 192.168.2.2 eq 23 <- Deny telne...", "cmd": "access-list 100 deny tcp any host 192.168.2.2 eq 23 <- Deny telnet to F0/0\naccess-list 100 deny tcp any host 192.168.3.2 eq 23 <- Deny telnet to F0/1\naccess-list 100 permit ip any any <- Permit from any to any", "desc": "How to confgire ACL with legacy way > Extended Access List (100-199) > Examples of Extended ACL(100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 100 permit tcp host 192.168.1.1 host 192.168.2.2 eq 23 ...", "cmd": "access-list 100 permit tcp host 192.168.1.1 host 192.168.2.2 eq 23 <- Permit telnet to F0/0\naccess-list 100 permit tcp host 192.168.1.1 host 192.168.3.2 eq 23 <- Permit telnet to F0/1\naccess-list 100 deny tcp any host 192.168.2.2 eq 23 <- Deny telnet to F0/0\naccess-list 100 deny tcp any host 192.168.3.2 eq 23 <- Deny telnet to F0/1\naccess-list 100 permit ip any any", "desc": "How to confgire ACL with legacy way > Extended Access List (100-199) > Examples of Extended ACL(100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 100 permit ip any any <- Permit from any to any", "cmd": "access-list 100 permit ip any any <- Permit from any to any\naccess-list 100 permit ip 192.168.10.0 0.0.0.255 any <- Permit from 192.168.10.0/24 to any\naccess-list 100 permit tcp host 192.168.1.1 host 10.50.1.1 eq www <- Permit From 192.168.1.1 To 10.50.1.1", "desc": "How to confgire ACL with legacy way > Extended Access List (100-199) > Examples of Extended ACL(100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 100 deny tcp any host 172.16.1.1 eq www <- Deny f...", "cmd": "access-list 100 deny tcp any host 172.16.1.1 eq www <- Deny from any to 172.16.1.1", "desc": "How to confgire ACL with legacy way > Extended Access List (100-199) > Examples of Extended ACL(100-199)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host(config)#hostname RouterA", "cmd": "Host(config)#hostname RouterA", "desc": "Basic Settings > Hostname" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Logging", "title": "Host(config)#line console 0", "cmd": "Host(config)#line console 0\nHost(config-line)#logging synchronous", "desc": "Basic Settings > Synchronous Logging" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host(config)#no ip domain-lookup", "cmd": "Host(config)#no ip domain-lookup\nor\nHost(config)#no ip domain lookup", "desc": "Basic Settings > Disabling DNS Lookup" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host> en <- enable", "cmd": "Host> en <- enable", "desc": "Operation Order Example" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host#conf t <- configure terminal", "cmd": "Host#conf t <- configure terminal\nHost(config)# CONFIGURATION\nHost(config-if)# CONFIGURATION", "desc": "Operation Order Example" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "show ip route | i 192", "cmd": "show ip route | i 192", "desc": "TIPS > iinclude" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show run | b router bgp", "cmd": "show run | b router bgp", "desc": "TIPS > bbegin" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "R1(config)# router bgp 10", "cmd": "R1(config)# router bgp 10\nR1(config-router)# neighbor 192.168.1.2 remote-as 20\nR1(config-router)# network 192.168.0.0 0.0.0.255", "desc": "Cisco BGP Configuration Examples" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "R2(config)# router bgp 20", "cmd": "R2(config)# router bgp 20\nR1(config-router)# neighbor 192.168.1.1 remote-as 20\nR2(config-router)# network 192.168.2.0 0.0.0.255", "desc": "Cisco BGP Configuration Examples" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host# terminal length 0", "cmd": "Host# terminal length 0\nHost# show run", "desc": "Show running-config > without more" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host# terminal length 24", "cmd": "Host# terminal length 24\nHost# show run", "desc": "Show running-config > with more" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host# terminal length 30", "cmd": "Host# terminal length 30\nHost# show run", "desc": "Show running-config > with more" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Host# configure terminal", "cmd": "Host# configure terminal\nHost(config)# do sh int status\nHost(config)# do sh run int Gi1/0/8", "desc": "Show running-config > Check Interface Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host# copy running-config startup-config", "cmd": "Host# copy running-config startup-config", "desc": "Save Configration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host# wr", "cmd": "Host# wr\nor\nHost# write", "desc": "Save Configration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host#copy running-config tftp:", "cmd": "Host#copy running-config tftp:\nor\nHost#copy running-config tftp:conf/aaa01-rt/aaa01-rt_20131115.txt\nor\nHost#copy running-config tftp://192.168.0.10/conf/aaa01-rt/aaa01-rt_20131115.txt", "desc": "Configuration Backup to TFTP Server > Backup Runnning Configuration to TFTP Server" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host#copy startup-config tftp:", "cmd": "Host#copy startup-config tftp:", "desc": "Configuration Backup to TFTP Server > Backup Startup Configuration to TFTP Server" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "Host#copy startup-config tftp:conf/test-l2/test-l2_20151010.txt vr...", "cmd": "Host#copy startup-config tftp:conf/test-l2/test-l2_20151010.txt vrf ", "desc": "Configuration Backup to TFTP Server > Configuration Backup to TFTP Server With VRF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "Host#copy startup-config tftp://192.168.0.10/conf/test-l2/test-l2_2...", "cmd": "Host#copy startup-config tftp://192.168.0.10/conf/test-l2/test-l2_20151010.txt vrf ", "desc": "Configuration Backup to TFTP Server > Configuration Backup to TFTP Server With VRF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host#copy tftp running-config", "cmd": "Host#copy tftp running-config", "desc": "Configuration Restore From TFTP Server" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Host#copy tftp startup-config", "cmd": "Host#copy tftp startup-config", "desc": "Configuration Restore From TFTP Server" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show stacks", "cmd": "show stacks", "desc": "Crashinfo > How to get crashinfo > Is thre crashinfo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Router#dir bootflash:", "cmd": "Router#dir bootflash:\nDirectory of bootflash:/", "desc": "Crashinfo > How to get crashinfo > How to check crashinfo." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "copy bootflash:crashinfo_XXXXX tftp", "cmd": "copy bootflash:crashinfo_XXXXX tftp", "desc": "Crashinfo > How to get crashinfo > How to get crashinfo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Router#show context", "cmd": "Router#show context", "desc": "Command Example > show context" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "Router# show ip eigrp interfaces", "cmd": "Router# show ip eigrp interfaces", "desc": "Commands > Checking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Xmit Queue Mean Pacing Time Multicast Pending", "cmd": "Xmit Queue Mean Pacing Time Multicast Pending\nInterface Peers Un/Reliable SRTT Un/Reliable Flow Timer Routes\nDi0 0 0/0 0 11/434 0 0\nEt0 1 0/0 337 0/10 0 0\nSE0:1.16 1 0/0 10 1/63 103 0\nTu0 1 0/0 330 0/16 0 0", "desc": "Commands > Checking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "Router# show ip eigrp traffic", "cmd": "Router# show ip eigrp traffic", "desc": "Commands > Checking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "Router# show ip eigrp neighbors", "cmd": "Router# show ip eigrp neighbors", "desc": "Commands > Checking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "H Address Interface Hold Uptime SRTT RTO Q Seq", "cmd": "H Address Interface Hold Uptime SRTT RTO Q Seq\n(sec) (ms) Cnt Num\n0 10.1.1.2 Et0/0 13 00:00:03 1996 5000 0 5\n2 10.1.1.9 Et0/0 14 00:02:24 206 5000 0 5\n1 10.1.2.3 Et0/1 11 00:20:39 2202 5000 0 5", "desc": "Commands > Checking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "Router# show ip eigrp topology", "cmd": "Router# show ip eigrp topology", "desc": "Commands > Checking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "R1(config)# router eigrp 1", "cmd": "R1(config)# router eigrp 1\nR1(config-router)# network 192.168.0.1 0.0.0.255\nR1(config-router)# network 192.168.1.1 0.0.0.255", "desc": "Example > Example1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "R2(config)# router eigrp 1", "cmd": "R2(config)# router eigrp 1\nR2(config-router)# network 192.168.1.2 0.0.0.255\nR2(config-router)# network 192.168.2.2 0.0.0.255", "desc": "Example > Example1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "R3(config)# router eigrp 1", "cmd": "R3(config)# router eigrp 1\nR3(config-router)# network 192.168.2.3 0.0.0.255\nR3(config-router)# network 192.168.3.3 0.0.0.255", "desc": "Example > Example1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "(config)# router eigrp 1", "cmd": "(config)# router eigrp 1\n(config-router)# network 192.168.1.0 0.0.0.255\n(config-router)# network 192.168.2.0 0.0.0.255\n(config-router)# passive-interface GigabitEthernet0/0", "desc": "Example > Example2" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "EtherChannel", "title": "Switch#show etherchannel summary", "cmd": "Switch#show etherchannel summary\nFlags: D - down P - in port-channel\n I - stand-alone s - suspended\n H - Hot-standby (LACP only)\n R - Layer3 S - Layer2\n u - unsuitable for bundling\n U - in use f - failed to allocate aggregator\n d - default port\nNumber of channel-groups in use: 1\nNumber of aggregators: 1\nGroup Port-channel 　Protocol Ports\n------+-------------+-----------+--------------------------\n1 Po1(SU) LACP Fa0/1(P) Fa0/2(P)", "desc": "Check Commands" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "EtherChannel", "title": "(1)Physical Interface", "cmd": "(1)Physical Interface\nSwitch1# conf t\nSwitch1(config)# interface range FastEthernet 0/11\nSwitch1(config-if)# channel-group 1 mode on <- Create \"Port-channel1\" interface\nSwitch1(config-if)# description test02-l2_12", "desc": "Configuration > static mode on" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "EtherChannel", "title": "Switch1(config-if)# interface range FastEthernet 0/12", "cmd": "Switch1(config-if)# interface range FastEthernet 0/12\nSwitch1(config-if)# channel-group 1 mode on <- Create \"Port-channel1\" interface\nSwitch1(config-if)# description test02-l2_12", "desc": "Configuration > static mode on" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "(2)Logical Interface", "cmd": "(2)Logical Interface\nSwitch1(config)# interface port-channel 1\nSwitch1(config-if)# description test02-l2_11-12\nSwitch1(config-if)# switchport trunk encapsulation dot1q\nSwitch1(config-if)# switchport mode trunk\nSwitch1(config-if)# switchport trunk native vlan 555\nSwitch1(config-if)# switchport trunk allowed vlan 50,100,110,555", "desc": "Configuration > static mode on" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch# configure terminal", "cmd": "Switch# configure terminal\nSwitch(config) # interface range gigabitethernet 1/0/1 , gigabitethernet2/0/1\nSwitch(config-if-range) # switchport trunk encapsulation dot1q\nSwitch(config-if-range) # switchport mode trunk\nSwitch(config-if-range) # channel-group 1 mode active", "desc": "Configuration > LACP mode active" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch1(config)# interface port-channel 1", "cmd": "Switch1(config)# interface port-channel 1\nSwitch1(config-if)# switchport trunk allowed vlan add 93", "desc": "Adding VLAN Deleting VLAN > Add VLAN for the Port-channel" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch1(config)# interface port-channel 1", "cmd": "Switch1(config)# interface port-channel 1\nSwitch1(config-if)# switchport trunk allowed vlan remove 93", "desc": "Adding VLAN Deleting VLAN > Delete VLAN from Port-channel" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EtherChannel", "title": "Switch1(config)# interface gigabitethernet 1/1", "cmd": "Switch1(config)# interface gigabitethernet 1/1\nSwitch1(config-if)# shutdown\nSwitch1(config-if)# no channel-group", "desc": "Delete port from Channel Group" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "Router# show standby brief", "cmd": "Router# show standby brief", "desc": "Command Example" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Interface Grp Prio P State Active addr Standby addr Gro...", "cmd": "Interface Grp Prio P State Active addr Standby addr Group addr \n Et0 0 120 Init 10.0.0.1 unknown 10.0.0.12", "desc": "Command Example" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "Router# show standby", "cmd": "Router# show standby", "desc": "Command Example" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Ethernet0/1 - Group 1", "cmd": "Ethernet0/1 - Group 1\n State is Active\n 2 state changes, last state change 00:30:59\n Virtual IP address is 10.1.0.20\n Secondary virtual IP address 10.1.0.21\n Active virtual MAC address is 0004.4d82.7981\n Local virtual MAC address is 0004.4d82.7981 (bia)\n Hello time 4 sec, hold time 12 sec\n Next hello sent in 1.412 secs\n Gratuitous ARP 14 sent, next in 7.412 secs\n Preemption enabled, min delay 50 sec, sync delay 40 sec\n Active router is local\n Standby router is 10.1.0.6, priority 75 (expires in 9.184 sec)\n Priority 95 (configured 120)\n Tracking 2 objects, 0 up\n Down Interface Ethernet0/2, pri 15\n Down Interface Ethernet0/3\n Group name is \"HSRP1\" (cfgd)\n Follow by groups:\n Et1/0.3 Grp 2 Active 10.0.0.254 0000.0c07.ac02 refresh 30 secs (next 19.666)\n Et1/0.4 Grp 2 Active 10.0.0.254 0000.0c07.ac02 refresh 30 secs (next 19.491)\n Group name is \"HSRP1\", advertisement interval is 34 sec", "desc": "Command Example" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Host1 > enable", "cmd": "Host1 > enable\nHost1# configure terminal\nHost1(config)# interface vlan 1\nHost1(config-if)# ip address 192.168.1.2 255.255.255.0\nHost1(config-if)# standby 1 ip 192.168.1.1 <- VIP\nHost1(config-if)# standby 1 priority 105\nHost1(config-if)# standby 1 preempt delay minimum 10 <- When the active side is restored Automatic trimming back in ten seconds\nHost1(config-if)# no shutdown\nHost1(config-if)# exit\nHost1(config)# exit\nHost1# copy running-config startup-config", "desc": "Setting Example > HSRP > Router A" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Host2 > enable", "cmd": "Host2 > enable\nHost2# configure terminal\nHost2(config)# interface vlan 1\nHost2(config-if)# ip address 192.168.1.3 255.255.255.0\nHost2(config-if)# standby 1 ip 192.168.1.1\nHost2(config-if)# standby 1 priority 103\nHost2(config-if)# standby 1 preempt delay minimum 10\nHost2(config-if)# no shutdown\nHost2(config-if)# exit\nHost2(config)# exit\nHost2# copy running-config startup-config", "desc": "Setting Example > HSRP > Router B" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Host# conf t", "cmd": "Host# conf t\nHost(config)# default interface gi3/0/37\nHost(config)# interface gi3/0/37\nHost(config-if)#shutdown\nHost(config-if)#exit\nHost(config)#", "desc": "Setting Interface > How to configure an interface to default settings > Example1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Host# conf t", "cmd": "Host# conf t\nHost(config)# do sh int status | i 3/0/37\nHost(config)# do sh run interface gi3/0/37", "desc": "Setting Interface > How to configure an interface to default settings > Example2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Host(config)# default interface gi3/0/37", "cmd": "Host(config)# default interface gi3/0/37\nHost(config)# interface gi3/0/37\nHost(config-if)#shutdown\nHost(config-if)#exit", "desc": "Setting Interface > How to configure an interface to default settings > Example2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Host(config)# do sh int status | i 3/0/37", "cmd": "Host(config)# do sh int status | i 3/0/37\nHost(config)# do sh run interface gi3/0/37", "desc": "Setting Interface > How to configure an interface to default settings > Example2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Switch# configure terminal", "cmd": "Switch# configure terminal\nSwitch(config)# interface gigabitethernet1/0/1\nSwitch(config-if)# speed auto\nSwitch(config-if)# duplex auto\nSwitch(config-if)# mdix auto\nSwitch(config-if)# end", "desc": "Setting Interface > How to configure an interface to default settings > Example3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Host(config)#int fa 0/1", "cmd": "Host(config)#int fa 0/1\nHost(config)#interface FastEthernet 3/0/7\n#range\nint range fa0/1-8\nint range fa0/1, fa0/3, fa0/7\ninterface range gi 0/1 -2\ninterface range fastethernet 0/1 - 24\ninterface range gigabitEthernet 1/1 - 4\ninterface range fastEthernet 2 - 9\ninterface range GigabitEthernet 1/0/8 - 11", "desc": "How to specify interfaces by range" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range gigabitethernet 1/0/13-14 , gigabitethernet 2/0/13-14", "cmd": "interface range gigabitethernet 1/0/13-14 , gigabitethernet 2/0/13-14", "desc": "How to specify interfaces by range" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "R1(config)# crypto isakmp policy 1", "cmd": "R1(config)# crypto isakmp policy 1\nR1(config-isakmp)# encryption 3des\nR1(config-isakmp)# hash sha\nR1(config-isakmp)# authentication pre-share\nR1(config-isakmp)# group 2\nR1(config-isakmp)# lifetime 86400", "desc": "Setting > CONFIGURE ISAKMP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "R1(config)# crypto isakmp key cisco address 1.1.1.2", "cmd": "R1(config)# crypto isakmp key cisco address 1.1.1.2\nR1(config)# crypto isakmp keeepalive 30 periodic", "desc": "Setting > CONFIGURE ISAKMP" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "ACL", "title": "R1(config)# access-list 101", "cmd": "R1(config)# access-list 101\nR1(config-ext-nacl)# permit ip 10.10.10.0 0.0.0.255 20.20.20.0 0.0.0.255", "desc": "Setting > CONFIGURE IPSEC > CREATING EXTENDED ACL" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "R1(config)# crypto ipsec transform-set IPSEC esp-3des esp-md5-hmac", "cmd": "R1(config)# crypto ipsec transform-set IPSEC esp-3des esp-md5-hmac", "desc": "Setting > CONFIGURE IPSEC > CREATE IPSEC TRANSFORM (ISAKMP PHASE 2 POLICY)" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "R1(config)# crypto map CRYPTMAP 1 ipsec-isakmp", "cmd": "R1(config)# crypto map CRYPTMAP 1 ipsec-isakmp\nR1(config-crypto-map)# set peer 1.1.1.2\nR1(config-crypto-map)# set transform-set IPSEC\nR1(config-crypto-map)# match address 101", "desc": "Setting > CONFIGURE IPSEC > CREATE CRYPTO MAP" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "R1(config)# interface GigabitEthernet0/0", "cmd": "R1(config)# interface GigabitEthernet0/0\nR1(config-if)# crypto map CRYPTMAP", "desc": "Setting > CONFIGURE IPSEC > APPLY CRYPTO MAP TO THE PUBLIC INTERFACE" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Host(config)# interface FastEthernet4/0/18", "cmd": "Host(config)# interface FastEthernet4/0/18\nHost(config-if)# no logging event link-status\nHost(config-if)# no snmp trap link-status", "desc": "Syslog Server > Example > Stopping interface up/down log to syslog server" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Host(config)# interface FastEthernet4/0/18", "cmd": "Host(config)# interface FastEthernet4/0/18\nHost(config-if)# logging event link-status\nHost(config-if)# snmp trap link-status", "desc": "Syslog Server > Example > Restarting interface up/down log to syslog server" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "Host(config)#enable secret xxxxxxxxxx <- Enable Password", "cmd": "Host(config)#enable secret xxxxxxxxxx <- Enable Password", "desc": "How to set a password" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "Host# conf t", "cmd": "Host# conf t\nHost(config)# username password \nHost(config)# show user-account", "desc": "SSH - How to login with SSH" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "Host(config)# aaa new-model", "cmd": "Host(config)# aaa new-model", "desc": "SSH - How to login with SSH" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "Host(config)# ip domain-name example.com", "cmd": "Host(config)# ip domain-name example.com\nHost(config)# hostname test1\ntest1(config)# ip ssh version 2\ntest1(config)# crypto key generate rsa\nHow many bits in the modulus [512]:2048", "desc": "SSH - How to login with SSH" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa new-model", "cmd": "aaa new-model", "desc": "RADIUS - How to login with radius server authentication. > RADIUS - Local Auth > IOS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa authentication login AUTHENTICATION-LINE line", "cmd": "aaa authentication login AUTHENTICATION-LINE line\naaa authentication login AUTHENTICATION-RADIUS group radius local\naaa authentication exec AUTHENTICATION-RADIUS group radius local", "desc": "RADIUS - How to login with radius server authentication. > RADIUS - Local Auth > IOS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "!! L3", "cmd": "!! L3\nip radius source-interface VlanXXXX", "desc": "RADIUS - How to login with radius server authentication. > RADIUS - Local Auth > IOS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "aaa group server radius management", "cmd": "aaa group server radius management\n server-private 192.168.1.100 key XXXXX\n ip vrf forwarding XXXXXXX\n ip radius source-interface VlanXXX", "desc": "RADIUS - How to login with radius server authentication. > RADIUS - Local Auth > IOS with VRF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa authentication login AUTHENTICATION-LINE line", "cmd": "aaa authentication login AUTHENTICATION-LINE line\naaa authentication login AUTHENTICATION-RADIUS group management local\naaa authentication exec AUTHENTICATION-RADIUS group management local", "desc": "RADIUS - How to login with radius server authentication. > RADIUS - Local Auth > IOS with VRF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "switch# show ip arp", "cmd": "switch# show ip arp", "desc": "Arp Table > Show > Examples" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Flags: D - Static Adjacencies attached to down interface", "cmd": "Flags: D - Static Adjacencies attached to down interface", "desc": "Arp Table > Show > Examples" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "IP ARP Table for context default", "cmd": "IP ARP Table for context default\nTotal number of entries: 1\nAddress Age MAC Address Interface\n2.2.2.100 - 000a.000a.000a Ethernet1/2\nswitch#", "desc": "Arp Table > Show > Examples" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "switch# show ip arp detail", "cmd": "switch# show ip arp detail\nIP ARP Table for context default\nTotal number of entries: 1\nAddress Age MAC Address Interface Physical Interface\n90.10.10.2 00:02:55 000d.ece7.df7c Vlan900 Ethernet1/12\nswitch#", "desc": "Arp Table > Show > Examples" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switch# show mac address-table ", "cmd": "switch# show mac address-table \nLegend:\n- primary entry, G - Gateway MAC, (R) - Routed MAC, O - Overlay MAC\n age - seconds since last seen,+ - primary entry using vPC Peer-Link\n VLAN MAC Address Type age Secure NTFY Ports\n---------+-----------------+--------+---------+------+----+------------------\n100 0000.0001.0003 dynamic 0 F F Po1\n100 0000.0001.0004 dynamic 0 F F Po1\n100 0000.0001.0009 dynamic 0 F F Po1\n100 0000.0001.0010 dynamic 0 F F Po1\n1 001d.7172.6c40 dynamic 300 F F Eth100/1/20\nswitch#", "desc": "Mac Address Table > Show > Example" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch(config)#mac address-table static 0010.aaaa.aaaa vlan 1 inter...", "cmd": "Switch(config)#mac address-table static 0010.aaaa.aaaa vlan 1 interface fastethernet0/4", "desc": "Mac Address Table > Configuration > Setting Mac address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ping 192.168.254.10", "cmd": "ping 192.168.254.10", "desc": "Investigateion destination port from IP address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "(1) Check Arp Table(Mac address from IP Address)", "cmd": "(1) Check Arp Table(Mac address from IP Address)\nshow arp | include 192.168.254.10\nInternet 192.168.254.10 3 0000.1111.2222 ARPA Vlan100", "desc": "Investigateion destination port from IP address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "(2) Check Mac address table (destination port of mac address)", "cmd": "(2) Check Mac address table (destination port of mac address)\nshow mac-address-table | include 0000.1111.2222\n10 0000.1111.2222 DYNAMIC Fa0/3", "desc": "Investigateion destination port from IP address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Catalyst(config)# monitor session 1 source interface FastEthernet 0/10", "cmd": "Catalyst(config)# monitor session 1 source interface FastEthernet 0/10\nCatalyst(config)# monitor session 1 destination interface FastEthernet 0/24", "desc": "Example > Local Span > Source Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Catalyst(config)#monitor session 1 source interface f0/1 - 2", "cmd": "Catalyst(config)#monitor session 1 source interface f0/1 - 2\nCatalyst(config)#monitor session 1 destination interface f0/3", "desc": "Example > Local Span > Source Interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Catalyst(config)# monitor session 1 source vlan 10", "cmd": "Catalyst(config)# monitor session 1 source vlan 10\nCatalyst(config)# monitor session 1 destination interface FastEthernet 0/24", "desc": "Example > Local Span > Source VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Catalyst(config)#monitor session 1 source interface f0/1 rx", "cmd": "Catalyst(config)#monitor session 1 source interface f0/1 rx\nCatalyst(config)#monitor session 1 destination interface f0/2", "desc": "Example > Local Span > Source rx only" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "SW1(config)# vlan 999", "cmd": "SW1(config)# vlan 999\nSW1(config-vlan)# remote-span", "desc": "Example > Remote SPAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "SW1(config)# monitor session 1 source interface FastEthernet 0/10", "cmd": "SW1(config)# monitor session 1 source interface FastEthernet 0/10\nSW1(config)# monitor session 1 destination remote vlan 999", "desc": "Example > Remote SPAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "SW2(config)# vlan 999", "cmd": "SW2(config)# vlan 999\nSW2(config-vlan)# remote-span", "desc": "Example > Remote SPAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "SW2(config)# monitor session 1 source remote vlan 999", "cmd": "SW2(config)# monitor session 1 source remote vlan 999\nSW2(config)# monitor session 1 destination interface FastEthernet 0/24", "desc": "Example > Remote SPAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "3750-Stk>show switch", "cmd": "3750-Stk>show switch\n Current\nSwitch# Role Mac Address Priority State\n--------------------------------------------------------\n 1 Slave 0016.4748.dc80 5 Ready\n*2 Master 0016.9d59.db00 1 Ready", "desc": "Show > Example" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "3750-Stk#show switch stack-ports", "cmd": "3750-Stk#show switch stack-ports", "desc": "Show > Example" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "3750-Stk# show switch neighbors", "cmd": "3750-Stk# show switch neighbors", "desc": "Show > Example" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip route 192.168.1.0 255.255.255.192 192.168.0.1", "cmd": "ip route 192.168.1.0 255.255.255.192 192.168.0.1 # 192.168.1.0/26 = Host 192.168.1.0 - 192.168.1.63\nip route 192.168.1.64 255.255.255.192 192.168.0.1 # 192.168.1.64/26 = Host 192.168.1.64 - 192.168.1.127\nip route 192.168.1.128 255.255.255.192 192.168.0.1 # 192.168.1.128/26 = Host 192.168.1.128 - 192.168.1.192", "desc": "Commands > Configuration" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface Ethernet1/X", "cmd": "interface Ethernet1/X\n ptp\n ptp vlan 10\n switch port access vlan 10", "desc": "Cisco PTP > Cisco PTP Configuration" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch#conf t ← configure terminal", "cmd": "Switch#conf t ← configure terminal\nSwitch(conf)#vlan 10 ← make VLAN 10\nSwitch(config-vlan)#name VLAN10 ← \"vlan 10\"'s Name is VLAN10.\nSwitch(config-vlan)#end\nSwitch#\nSwitch#show vlan brief ← Check", "desc": "Createing VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch#conf t ← configure terminal", "cmd": "Switch#conf t ← configure terminal\nSwitch(conf)# no vlan 10\nSwitch(config-vlan)#end\nSwitch#\nSwitch#show vlan brief ← Check", "desc": "Deleteing VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch(conf)# no interface Vlan10", "cmd": "Switch(conf)# no interface Vlan10\nor\nSwitch(conf)# no interface vlan 10", "desc": "Deleteing VLAN > Deleteing VLAN Interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Swtich# show vlan", "cmd": "Swtich# show vlan", "desc": "Deleteing VLAN > Deleteing VLAN Interface > Check" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch#conf t", "cmd": "Switch#conf t\nSwitch(config)#interface fa0/1\nSwitch(config-if)#switchport mode access\nSwitch(config-if)#switchport access vlan 10\nSwitch(config-if)#end\nSwitch#\nSwitch#show vlan brief ← Check", "desc": "Access Port (1 VLAN)" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch# configure terminal", "cmd": "Switch# configure terminal\nSwitch(config)#\nSwitch(config)# interface fa0/8\nSwitch(config-if)# switchport trunk encapsulation dot1q\nSwitch(config-if)# switchport mode trunk\nSwitch(config-if)# switchport nonegotiate\nSwitch(config-if)# end\nSwitch#\nSwitch# show interfaces trunk", "desc": "Trunk Port (Multiple VLAN)" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch(config)# interface GigabitEthernet 0/1", "cmd": "Switch(config)# interface GigabitEthernet 0/1\nSwitch(config-if)# switchport trunk allowed vlan vlan 10,20,30\nExample VLAN_NO\nvlan 1-3\nvlan 10,20,30\nvlan 1-3,10", "desc": "Trunk Port (Multiple VLAN) > Permit VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch(config)# vlan VLAN_NO <- add vlan", "cmd": "Switch(config)# vlan VLAN_NO <- add vlan", "desc": "Trunk Port (Multiple VLAN) > Add VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch(config)# interface GigabitEthernet 0/1", "cmd": "Switch(config)# interface GigabitEthernet 0/1\nSwitch(config-if)# switchport trunk allowed vlan add 40,50", "desc": "Trunk Port (Multiple VLAN) > Add VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch(config)# interface GigabitEthernet 0/1", "cmd": "Switch(config)# interface GigabitEthernet 0/1\nSwitch(config-if)# switchport trunk allowed vlan remove VLAN_NO\nExample\nSwitch(config-if)# switchport trunk allowed vlan remove 15,16", "desc": "Trunk Port (Multiple VLAN) > Delete VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch#", "cmd": "Switch#\nSwitch#conf t\nSwitch(config)#interface vlan 1\nSwitch(config-if)#ip address 192.168.1.1 255.255.255.0\nSwitch(config-if)#no shutdown\nSwitch(config-if)#exit\nSwitch(config)#exit\nSwitch#", "desc": "Magagement IP adresss to VLAN interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Host(config)", "cmd": "Host(config) # vlan 10\nHost(config) # vlan 20", "desc": "SVISwitch Virtual Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "Host(config)", "cmd": "Host(config) # ip routing", "desc": "SVISwitch Virtual Interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Host(config)", "cmd": "Host(config) # interface vlan 10\nHost(config-if) # ip address 192.168.10.254 255.255.255.0\nHost(config-if) # no shutdown", "desc": "SVISwitch Virtual Interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Host(config)", "cmd": "Host(config) # interface vlan 20\nHost(config-if) # ip address 192.168.20.254 255.255.255.0\nHost(config-if) # no shutdown", "desc": "SVISwitch Virtual Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "Router(config)# ip vrf CustomerA", "cmd": "Router(config)# ip vrf CustomerA\nRouter(config-vrf)# rd 1:100", "desc": "Setting > Definition of VRF Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "Router(config-vrf)# exit", "cmd": "Router(config-vrf)# exit\nRouter#show ip vrf", "desc": "Setting > Definition of VRF Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Router(config)# interface GigabitEthernet 0/0", "cmd": "Router(config)# interface GigabitEthernet 0/0\nRouter(config-if)# ip vrf forwarding CustomerA\nRouter(config-if)# ip address 192.168.1.254", "desc": "Setting > Apply VRF to Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "Router(config)# interface Vlan100", "cmd": "Router(config)# interface Vlan100\nRouter(config-if)# ip vrf forwarding CustomerA\nRouter(config-if)# ip address 192.168.1.254", "desc": "Setting > Apply VRF to Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "Router(config)# ip route vrf CustomerA 10.1.1.0 255.255.255.0 192.1...", "cmd": "Router(config)# ip route vrf CustomerA 10.1.1.0 255.255.255.0 192.168.1.1", "desc": "Setting > Apply Routing to VRF > Static Route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "Router(config)#router bgp ", "cmd": "Router(config)#router bgp \nRouter(config-router)#address-family ipv4 vrf \nRouter(config-router-af)# neighbor remote ", "desc": "Setting > Apply Routing to VRF > BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 10000", "cmd": "router bgp 10000\n address-family ipv4 vrf VRF-1\n neighbor 10.10.0.2 remote-as 10002\n neighbor 10.10.0.2 activate\n no auto-summary\n no synchronization\n network 2.2.2.2 mask 255.255.255.255\n exit-address-family", "desc": "Setting > Apply Routing to VRF > Example" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "Router(config)# router eigrp ", "cmd": "Router(config)# router eigrp \nRouter(config)# address-family ipv4 vrf \nRouter(config)# network \nRouter(config)# autonomous-system ", "desc": "Setting > Apply Routing to VRF > EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config)# router ospf PID vrf VRFNAME", "cmd": "Router(config)# router ospf PID vrf VRFNAME\nRouter(config)# network x.x.x.x 0.0.0.255 area AREANUMBER", "desc": "Setting > Apply Routing to VRF > OSPF" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "{primary:node0}", "cmd": "{primary:node0}\nroot@test01-fw> configure\nwarning: Clustering enabled; using private edit\nwarning: uncommitted changes will be discarded on exit\nEntering configuration mode", "desc": "Login" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system host-name test-host1", "cmd": "set system host-name test-host1", "desc": "Hostname and domain" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system domain-name juniper.net", "cmd": "set system domain-name juniper.net", "desc": "Hostname and domain" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NTP", "title": "set system ntp server 10.10.10.100", "cmd": "set system ntp server 10.10.10.100\nset system time-zone Asia/Tokyo", "desc": "NTP Server" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set snmp community public authorization read-only", "cmd": "set snmp community public authorization read-only", "desc": "SNMP" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "set snmp trap-group trap targets 10.10.10.200", "cmd": "set snmp trap-group trap targets 10.10.10.200", "desc": "SNMP" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root> show chassis cluter status", "cmd": "root> show chassis cluter status\nroot> show chassis cluter interfaces\nroot> show chassis cluter statistics\nroot> show chassis cluter control-plane statistics\nroot> show chassis cluter data-plane statistics\nroot> show chassis cluter status redundancy-group 1", "desc": "Check Chassis Cluster" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root> show chassis hardware detail", "cmd": "root> show chassis hardware detail\nroot> show version\nroot> show system license", "desc": "How to Configure SRX Chassis Cluster(HA) > Check SRX" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "root# set system root-authentication plain-text-password", "cmd": "root# set system root-authentication plain-text-password\nroot# commit", "desc": "How to Configure SRX Chassis Cluster(HA) > Chassis Cluster > Device1/Device2" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root> set chassis cluster cluster-id 1 node 0 reboot", "cmd": "root> set chassis cluster cluster-id 1 node 0 reboot", "desc": "How to Configure SRX Chassis Cluster(HA) > Chassis Cluster > Device 1" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root> set chassis cluster cluster-id 1 node 1 reboot", "cmd": "root> set chassis cluster cluster-id 1 node 1 reboot", "desc": "How to Configure SRX Chassis Cluster(HA) > Chassis Cluster > Device 2" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "{primary:node0}", "cmd": "{primary:node0}\nroot> configure", "desc": "How to Configure SRX Chassis Cluster(HA) > each node configuration > Device1" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root# set groups node0 system host-name srx1", "cmd": "root# set groups node0 system host-name srx1\nroot# set groups node0 interfaces fxp0 unit 0 family inet address 172.20.1.1/24", "desc": "How to Configure SRX Chassis Cluster(HA) > each node configuration > Device1" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root# set groups node1 system host-name srx2", "cmd": "root# set groups node1 system host-name srx2\nroot# set groups node1 interfaces fxp0 unit 0 family inet address 172.20.1.2/24", "desc": "How to Configure SRX Chassis Cluster(HA) > each node configuration > Device1" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root# set apply groups \"${node}\"", "cmd": "root# set apply groups \"${node}\"", "desc": "How to Configure SRX Chassis Cluster(HA) > each node configuration > Device1" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root# set interfaces fab0 fabric-options member-interfaces ge-0/0/0", "cmd": "root# set interfaces fab0 fabric-options member-interfaces ge-0/0/0\nroot# set interfaces fab1 fabric-options member-interfaces ge-1/0/0", "desc": "How to Configure SRX Chassis Cluster(HA) > Configuration of SRX Chassis Cluster(HA) > Configuration of fabric link" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root# set chassis cluster redundancy-group 0 node 0 priority 100", "cmd": "root# set chassis cluster redundancy-group 0 node 0 priority 100\nroot# set chassis cluster redundancy-group 0 node 1 priority 1", "desc": "How to Configure SRX Chassis Cluster(HA) > Configuration of SRX Chassis Cluster(HA) > Configuration of redundancy group" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root# set chassis cluster redundancy-group 1 node 0 priority 100", "cmd": "root# set chassis cluster redundancy-group 1 node 0 priority 100\nroot# set chassis cluster redundancy-group 1 node 1 priority 1", "desc": "How to Configure SRX Chassis Cluster(HA) > Configuration of SRX Chassis Cluster(HA) > Configuration of redundancy group" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "root# set chassis cluster redundancy-group 1 interface-monitor ge-0...", "cmd": "root# set chassis cluster redundancy-group 1 interface-monitor ge-0/0/3 weight 255\nroot# set chassis cluster redundancy-group 1 interface-monitor ge-0/0/4 weight 255", "desc": "How to Configure SRX Chassis Cluster(HA) > Configuration of SRX Chassis Cluster(HA) > Configuration of interface monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "root# set chassis cluster redundancy-group 1 interface-monitor ge-1...", "cmd": "root# set chassis cluster redundancy-group 1 interface-monitor ge-1/0/3 weight 255\nroot# set chassis cluster redundancy-group 1 interface-monitor ge-1/0/4 weight 255", "desc": "How to Configure SRX Chassis Cluster(HA) > Configuration of SRX Chassis Cluster(HA) > Configuration of interface monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root# set chassis cluster reth-count 2", "cmd": "root# set chassis cluster reth-count 2", "desc": "How to Configure SRX Chassis Cluster(HA) > Configuration of SRX Chassis Cluster(HA) > Configuration of redundant interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root# set chassis reh0 redundant-ether-options redundancy-group 1", "cmd": "root# set chassis reh0 redundant-ether-options redundancy-group 1\nroot# set chassis reh0 unit 0 family inet address 10.10.10.200/24", "desc": "How to Configure SRX Chassis Cluster(HA) > Configuration of SRX Chassis Cluster(HA) > Configuration of redundant interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root# set chassis reh1 redundant-ether-options redundancy-group 1", "cmd": "root# set chassis reh1 redundant-ether-options redundancy-group 1\nroot# set chassis reh1 unit 0 family inet address 192.168.1.1/24", "desc": "How to Configure SRX Chassis Cluster(HA) > Configuration of SRX Chassis Cluster(HA) > Configuration of redundant interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "root# set interfaces ge-0/0/3 gigether-options redundant-parent reth0", "cmd": "root# set interfaces ge-0/0/3 gigether-options redundant-parent reth0\nroot# set interfaces ge-1/0/3 gigether-options redundant-parent reth0", "desc": "How to Configure SRX Chassis Cluster(HA) > Configuration of SRX Chassis Cluster(HA) > Interface assignment" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "root# set interfaces ge-0/0/4 gigether-options redundant-parent reth1", "cmd": "root# set interfaces ge-0/0/4 gigether-options redundant-parent reth1\nroot# set interfaces ge-1/0/4 gigether-options redundant-parent reth1", "desc": "How to Configure SRX Chassis Cluster(HA) > Configuration of SRX Chassis Cluster(HA) > Interface assignment" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "root# set security zones security-zone Untrust interfaces reth0.0", "cmd": "root# set security zones security-zone Untrust interfaces reth0.0\nroot# set security zones security-zone Trust interfaces reth1.0", "desc": "How to Configure SRX Chassis Cluster(HA) > Configuration of SRX Chassis Cluster(HA) > Setting Security Zone" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set chassis cluster disable reboot", "cmd": "set chassis cluster disable reboot", "desc": "How to delete cluster and factory configuration" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root@srx# show version", "cmd": "root@srx# show version", "desc": "Replacing a Unit in a Cluster mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "root@srx# delete", "cmd": "root@srx# delete ### Note: this command will delete the whole configuration and leave your device blank\nroot@srx# set system root-authentication plain-text-password\nroot@srx# commit", "desc": "Replacing a Unit in a Cluster mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root@srx> set chassis cluster cluster-id 1 node 0 reboot", "cmd": "root@srx> set chassis cluster cluster-id 1 node 0 reboot", "desc": "Replacing a Unit in a Cluster mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis cluster status", "cmd": "show chassis cluster status", "desc": "Replacing a Unit in a Cluster mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "ssh user01@192.168.0.5", "cmd": "ssh user01@192.168.0.5\nconfigure <- configuration mode", "desc": "Configuration Flow > Configuration with set commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "configuration", "cmd": "configuration\nshow | display set <- check configuration\nshow | compare <- diff configuration\ncommit check <- check configuration\ncommit <- commit configuration. If you want to cancel this configuration, You can use \"rollback 0\" command.\nexit\nexit", "desc": "Configuration Flow > Configuration with set commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "ssh user01@192.168.0.5", "cmd": "ssh user01@192.168.0.5\nconfigure <- configuration mode\nload set terminal\n(abbr)\nCtrl + D\nshow | compare <- diff configuration\ncommit check <- check configuration\ncommit <- commit configuration. If you want to cancel this configuration, You can use \"rollback 0\" command.\nexit\nexit", "desc": "Configuration Flow > Configuration with load set terminal" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "ssh user01@192.168.0.5", "cmd": "ssh user01@192.168.0.5\nconfigure \nedit XXXXXXX <- edit is like cd of linux.\nedit XXXXXXX\nup\ntop\nedit XXXXXX\nshow | display set\nset XXXX\ndelete XXXX\nshow | compare\ncommit check\ncommit\nexit <- you need 'exit' command.\nexit", "desc": "Configuration Flow > Step by Step Configuration with edit command" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit XXXXXXX", "cmd": "edit XXXXXXX\nup\ntop\nedit XXXXXX\nshow | display set\nset XXXX\ndelete XXXX\nshow | compare\ncommit check\ncommit\nexit <- you need 'exit' command.\nexit", "desc": "Configuration Flow > Step by Step Configuration with edit command" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration | display set | save ftp://USER@192.168.0.10/tes...", "cmd": "show configuration | display set | save ftp://USER@192.168.0.10/test-fw_30102013.txt\nshow configuration | display set | save USER@192.168.0.5:/home/config/test00-fw/tes00-fw_20120714.txt\nshow configuration | display set | save ftp://USER:PASSWORD@192.168.0.5/tes00-fw_20120714.txt", "desc": "Backup > Backup to Remote Host" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "HA", "title": "{primary:node0}", "cmd": "{primary:node0}\nroot@J-SRX> show chassis cluster status \nCluster ID: 1 \nNode Priority Status Preempt Manual failover", "desc": "Example" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "{primary:node0}", "cmd": "{primary:node0}\nroot@J-SRX> show interfaces terse | match fxp \nfxp0 up up \nfxp0.0 up up inet 10.2.2.1/24 \nfxp1 up up \nfxp1.0 up up inet 129.16.0.1/2 \nfxp2 up up \nfxp2.0 up up tnp 0x1100001", "desc": "Example" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "root@J-SRX> show interfaces terse | match fab ", "cmd": "root@J-SRX> show interfaces terse | match fab \nge-0/0/2.0 up up aenet --> fab0.0\nge-9/0/2.0 up up aenet --> fab1.0\nfab0 up up \nfab0.0 up up inet 30.17.0.200/24 \nfab1 up up \nfab1.0 up up inet 30.18.0.200/24", "desc": "Example" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "{primary:node0}", "cmd": "{primary:node0}\nroot@J-SRX> show chassis cluster interfaces\nControl link 0 name: fxp1\nControl link status: Up", "desc": "Example" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "Fabric interfaces:", "cmd": "Fabric interfaces:\nName Child-interface Status\nfab0 ge-0/0/2 up\nfab0\nfab1 ge-9/0/2 up\nfab1\nFabric link status: Up", "desc": "Example" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "Interface Monitoring:", "cmd": "Interface Monitoring:\n Interface Weight Status Redundancy-group\n ge-2/0/1 255 Down 1 \n ge-11/0/1 255 Up 1 \n ge-11/0/0 255 Down 1 \n ge-2/0/0 255 Down 1", "desc": "Example" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces terse", "cmd": "show interfaces terse\nInterface Admin Link Proto Local Remote\nt1-0/1/0:0 up up \nt1-0/1/0:0.0 up up inet 192.168.220.18/30\nt1-0/1/0:1 up up\nt1-0/1/0:2 up up\nt1-0/1/0:3 up up\nat-1/0/0 up up\nat-1/0/1 up up\ndsc up up\nfxp0 up up\nfxp0.0 up up inet 192.168.71.249/21\nfxp1 up up\n(abbr)", "desc": "Check Interfaces > Confirm whether the interface is Up or Down" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ge-3/0/2", "cmd": "show interfaces ge-3/0/2\nPhysical interface: ge-3/0/2, Enabled, Physical link is Up\n Interface index: 167, SNMP ifIndex: 35\n Link-level type: 52, MTU: 1522, Speed: 1000mbps, Loopback: Disabled,\n Source filtering: Disabled, Flow control: Enabled, Auto-negotiation: Enabled\n Remote fault: Online\n Device flags : Present Running\n Interface flags: SNMP-Traps Internal: 0x4000\n CoS queues : 4 supported, 4 maximum usable queues\n Current address: 00:00:5e:00:53:7c, Hardware address: 00:00:5e:00:53:7c\n Last flapped : 2006-08-10 17:25:10 PDT (00:01:08 ago)\n Input rate : 0 bps (0 pps)\n Output rate : 0 bps (0 pps)\n Ingress rate at Packet Forwarding Engine : 0 bps (0 pps)\n Ingress drop rate at Packet Forwarding Engine : 0 bps (0 pps)\n Active alarms : None\n Active defects : None", "desc": "Check Interfaces > Check Interface Configuration" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "Logical interface ge-3/0/2.0 (Index 72) (SNMP ifIndex 69) ", "cmd": "Logical interface ge-3/0/2.0 (Index 72) (SNMP ifIndex 69) \n Flags: SNMP-Traps 0x4000\n VLAN-Tag [ 0x8100.512 0x8100.513 ] In(pop-swap 0x8100.530) Out(swap-push 0x8100.512 0x8100.513)\n Encapsulation: VLAN-CCC\n Egress account overhead: 100\n Ingress account overhead: 90\n Input packets : 0 \n Output packets: 0\n Protocol ccc, MTU: 1522\n Flags: Is-Primary", "desc": "Check Interfaces > Check Interface Configuration" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ge-0/0/1 | display set", "cmd": "show interfaces ge-0/0/1 | display set", "desc": "Check Interfaces > Check Interface Configuration" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ge-0/0/1 media", "cmd": "show interfaces ge-0/0/1 media", "desc": "Check Interfaces > Configuration of Negotiation > Check Duplex and Speed" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces fe-0/0/1 unit 0 family inet address 192.168.1.1/24", "cmd": "set interfaces fe-0/0/1 unit 0 family inet address 192.168.1.1/24", "desc": "Configuration Interface > IP address configuration" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces fe-0/0/1 disable", "cmd": "set interfaces fe-0/0/1 disable", "desc": "Configuration Interface > Enable/Disable(like ciscos no shutdown/shutdown)" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces fe-0/0/1 unit 0 family inet", "cmd": "set interfaces fe-0/0/1 unit 0 family inet", "desc": "Configuration Interface > unnumberd interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/1 ether-options auto-negotiation", "cmd": "set interfaces ge-0/0/1 ether-options auto-negotiation", "desc": "Configuration Interface > negotiation configuration" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/2 ether-options no-auto-negotiation", "cmd": "set interfaces ge-0/0/2 ether-options no-auto-negotiation\nset interfaces ge-0/0/2 ether-options speed 100m\nset interfaces ge-0/0/2 ether-options link-mode full-duplex", "desc": "Configuration Interface > negotiation configuration" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Interfaces", "title": "set security zones security-zone untrust interfaces ge-0/0/1 host-i...", "cmd": "set security zones security-zone untrust interfaces ge-0/0/1 host-inbound-traffic system-services ping", "desc": "Configuration Interface > Permit ICMP ping with SRX" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear interfaces statistics", "cmd": "clear interfaces statistics", "desc": "Clear interfaces statistics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show interfaces terse | match ae", "cmd": "show interfaces terse | match ae\nrun show interfaces terse | match ae", "desc": "Check" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show interfaces ae0 | display set", "cmd": "show interfaces ae0 | display set\nrun show interfaces ae0 | display set", "desc": "Check" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "set chassis aggregated-devices ethernet device-count 1 <-- Set...", "cmd": "set chassis aggregated-devices ethernet device-count 1 <-- Set the maximum value of LAG number\nset interfaces ae0 unit 0 family ethernet-switching\ndelete interfaces ge-0/0/1 unit 0 <-- Initialize interface\ndelete interfaces ge-0/0/2 unit 0\nset interfaces ge-0/0/1 ether-options 802.3ad ae0\nset interfaces ge-0/0/2 ether-options 802.3ad ae0\nrun show interfaces terse | match ae\nset interfaces ae0 aggregated-ether-options lacp active\nset interfaces ae0 aggregated-ether-options lacp periodic fast\nset interfaces ae0 unit 0 family ethernet-switching port-mode trunk vlan members VLAN10\nrun show interfaces extensive ae0", "desc": "LACP" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "set chassis aggregated-devices ethernet device-count 1", "cmd": "set chassis aggregated-devices ethernet device-count 1\nset interfaces ae0 unit 0 family ethernet-switching\ndelete interfaces ge-0/0/1 unit 0\ndelete interfaces ge-0/0/2 unit 0\nset interfaces ge-0/0/1 ether-options 802.3ad ae0\nset interfaces ge-0/0/2 ether-options 802.3ad ae0\nrun show interfaces terse | match ae\nset interfaces ae0 unit 0 family ethernet-switching port-mode trunk vlan members VLAN10\nrun show interfaces extensive ae0", "desc": "Static Link Aggregation" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set security log event", "cmd": "set security log event\nset security log event-rate 100\nset security log format sd-syslog\n## (1)For Local Storage ###\nset system syslog file TRAFFIC-LOG any any\nset system syslog file TRAFFIC-LOG match RT_FLOW\n## or \n## (2)For Syslog Server ###\nset system syslog host 192.168.0.99 any any\nset system syslog host 192.168.0.99 match RT_FLOW", "desc": "Configuration > log mode (Event mode or Stream mode) > Event mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set security log stream", "cmd": "set security log stream", "desc": "Configuration > log mode (Event mode or Stream mode) > Stream mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set security log stream TRAFFIC-LOG format sd-syslog", "cmd": "set security log stream TRAFFIC-LOG format sd-syslog\nset security log stream TRAFFIC-LOG host 192.168.0.99", "desc": "Configuration > log mode (Event mode or Stream mode) > Stream mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog file policy_session archive size 1000k <- 1,000...", "cmd": "set system syslog file policy_session archive size 1000k <- 1,000k = 1M\nset system syslog file policy_session archive files 5\nset system syslog log-rotate-frequency 15 <- check every 15 minutes", "desc": "Configuration > log mode (Event mode or Stream mode) > Stream mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system syslog user * any emergency", "cmd": "set system syslog user * any emergency\nset system syslog host x.x.x.x any notice\nset system syslog host x.x.x.x authorization info\nset system syslog host x.x.x.x match \"!(failed to delete .perm file or directory|xntpdmoduli does not exist)\"\nset system syslog host x.x.x.x facility-override local0\nset system syslog file messages any notice\nset system syslog file messages authoization info\nset system syslog file messages match \"!(failed to delete .perm file or directory|xntpdmoduli does not exist)\"\nset system syslog file interactive-commands interactive-commands any\nset system syslog source-address x.x.x.x", "desc": "Configuration > log mode (Event mode or Stream mode) > Stream mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set security log mode stream", "cmd": "set security log mode stream\nset security log source-address xx.xx.xx.xx\nset security log stream trafficlog format syslog\nset security log stream trafficlog host xx.xx.xx.xx\nset security log stream xxxxxxx", "desc": "Security Log" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set security screen ids-option Untrust_screen icmp ip-sweep thresho...", "cmd": "set security screen ids-option Untrust_screen icmp ip-sweep threshold 5000\nset security screen ids-option Untrust_screen icmp flood threshold 1000\nset security screen ids-option Untrust_screen icmp ping-death\nset security screen ids-option Untrust_screen ip spoofing\nset security screen ids-option Untrust_screen ip source-route-option\nset security screen ids-option Untrust_screen ip tear-drop\nset security screen ids-option Untrust_screen tcp port-scan threshold 5000\nset security screen ids-option Untrust_screen tcp syn-flood alarm-threshold 1024\nset security screen ids-option Untrust_screen tcp syn-flood source-threshold 400\nset security screen ids-option Untrust_screen tcp syn-flood destiation-threshold 4000\nset security screen ids-option Untrust_screen tcp syn-flood timeout 20\nset security screen ids-option Untrust_screen tcp land\nset security screen ids-option Untrust_screen udp flood threshold 1000 \nset security screen ids-option Untrust_screen limit-session source-ip-based 512", "desc": "Security Log" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show arp", "cmd": "show arp\nshow arp no-resolve <- don't use dns", "desc": "ARP Table > Check ARP Table" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear arp <- clear all arp table", "cmd": "clear arp <- clear all arp table\nclear arp hostname xx.xx.xx.xx", "desc": "ARP Table > Clear ARP Table" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ethernet-switching table", "cmd": "show ethernet-switching table", "desc": "Mac Address Table > Check Mac Address Table" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "set security nat source rule-set 1 from zone trust", "cmd": "set security nat source rule-set 1 from zone trust\nset security nat source rule-set 1 to zone untrust", "desc": "Configuration > Source NAT(1N) > Interface-based source NAT" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set security nat source rule-set 1 rule 1A match source-address 0.0...", "cmd": "set security nat source rule-set 1 rule 1A match source-address 0.0.0.0/0\nset security nat source rule-set 1 rule 1A then source-nat interface", "desc": "Configuration > Source NAT(1N) > Interface-based source NAT" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "set security nat source pool src_nat_pool_napt address 100.100.110....", "cmd": "set security nat source pool src_nat_pool_napt address 100.100.110.20/32 to 100.100.100.29/32", "desc": "Configuration > Source NAT(1N) > Pool-based source NAT" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "set security nat source rule-set src_nat_napt from zone trust", "cmd": "set security nat source rule-set src_nat_napt from zone trust\nset security nat source rule-set src_nat_napt to zone untrust", "desc": "Configuration > Source NAT(1N) > Pool-based source NAT" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "set security nat source rule-set src_nat_napt rule napt_1 match sou...", "cmd": "set security nat source rule-set src_nat_napt rule napt_1 match source-address 192.168.1.0/24\nset security nat source rule-set src_nat_napt rule napt_1 then source-nat pool src_nat_pool_napt", "desc": "Configuration > Source NAT(1N) > Pool-based source NAT" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set security nat proxy-arp interface ge-0/0/0.0 address 100.100.100...", "cmd": "set security nat proxy-arp interface ge-0/0/0.0 address 100.100.100.20/32 to 100.100.100.29/32", "desc": "Configuration > Source NAT(1N) > Pool-based source NAT" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "set security nat source rule-set src_nat_napt rule snat_1 match sou...", "cmd": "set security nat source rule-set src_nat_napt rule snat_1 match source-address 192.168.10.5/32\nset security nat source rule-set src_nat_napt rule snat_1 match source-address 192.168.11.5/32\nset security nat source rule-set src_nat_napt rule snat_1 match destination-address 0.0.0.0/0\nset security nat source rule-set src_nat_napt rule snat_1 then source-nat pool snat_pool_1", "desc": "Configuration > Source NAT(1N) > Pool-based source NAT" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "set security nat static rule-set untrust_to_trust rule RULE-NAME1 m...", "cmd": "set security nat static rule-set untrust_to_trust rule RULE-NAME1 match destination-address 203.xx.xx.xx/32\nset security nat static rule-set untrust_to_trust rule RULE-NAME1 then static-nat prefix 192.168.0.10/32", "desc": "Configuration > Staic NAT(11)" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "set security nat proxy-arp interface vlan.XXX address 203.xx.xx.xx/32", "cmd": "set security nat proxy-arp interface vlan.XXX address 203.xx.xx.xx/32", "desc": "Configuration > Staic NAT(11)" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "set security nat destination pool SVR_A address 10.1.1.5/32", "cmd": "set security nat destination pool SVR_A address 10.1.1.5/32", "desc": "Configuration > Destination NAT > 11" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "set security nat destination rule-set 1 from zone untrust", "cmd": "set security nat destination rule-set 1 from zone untrust", "desc": "Configuration > Destination NAT > 11" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "set security nat destination rule-set 1 rule 1A match destination-a...", "cmd": "set security nat destination rule-set 1 rule 1A match destination-address 100.0.0.1/32\nset security nat destination rule-set 1 rule 1A then destination-nat pool SVR_A", "desc": "Configuration > Destination NAT > 11" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "set security nat destination pool SVR_A address 10.1.1.5/32 port 80", "cmd": "set security nat destination pool SVR_A address 10.1.1.5/32 port 80\nset security nat destination pool SVR_B address 10.1.1.6/32 port 80", "desc": "Configuration > Destination NAT > 1N" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "set security nat destination rule-set 1 rule 1A match destination-a...", "cmd": "set security nat destination rule-set 1 rule 1A match destination-address 1.1.0.1/32\nset security nat destination rule-set 1 rule 1A match destination-port 80\nset security nat destination rule-set 1 rule 1A then destination-nat pool SVR_A", "desc": "Configuration > Destination NAT > 1N" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "set security nat destination rule-set 1 rule 1B match destination-a...", "cmd": "set security nat destination rule-set 1 rule 1B match destination-address 1.1.0.1/32\nset security nat destination rule-set 1 rule 1B match destination-port 8080\nset security nat destination rule-set 1 rule 1B then destination-nat pool SVR_B", "desc": "Configuration > Destination NAT > 1N" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "root> configure", "cmd": "root> configure\nroot# set security zones security-zone Trust interfaces reth0.0\nroot# set security zones security-zone Unrust interfaces reth1.0\nroot# show | compare\nroot# commit check\nroot# commit", "desc": "Show Policy > Create Security Zone" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "set security zones security-zone TRUST address-book address NW1 192...", "cmd": "set security zones security-zone TRUST address-book address NW1 192.168.10.0/24\nor\nset security address-book TRUST-NW address NW1 192.168.10.0/24\nset security address-book TRUST-NW attach zone TRUST", "desc": "Add Policy > create address-book and attach address-book to zone" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "set security zones security-zone untrust address-book address test-...", "cmd": "set security zones security-zone untrust address-book address test-01 xx.xx.xx.xx/32\nset security zones security-zone untrust address-book address test-02 xx.xx.xx.xx/32\nset security zones security-zone untrust address-book address-set test address test-01\nset security zones security-zone untrust address-book address-set test address test-02", "desc": "Add Policy > create address-book and attach address-book to zone" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set applications application test9999 protocol tcp", "cmd": "set applications application test9999 protocol tcp\nset applications application test9999 source-port 0-65535\nset applications application test9999 destination-port 9999", "desc": "Add Policy > create appplication" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "set security zones security-zone DMZ address-book address test-serv...", "cmd": "set security zones security-zone DMZ address-book address test-server1 100.100.100.11/32\nset security policies from-zone untrust to-zone DMZ policy 030102013 match source-address any\nset security policies from-zone untrust to-zone DMZ policy 030102013 match destination-address test-server1\nset security policies from-zone untrust to-zone DMZ policy 030102013 match application junos-http junos-https\nset security policies from-zone untrust to-zone DMZ policy 030102013 then permit\nset security policies from-zone untrust to-zone DMZ policy 030102013 then log session-init", "desc": "Add Policy > create policy" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "edit security policies from-zone UNTRUST to-zone TRUST", "cmd": "edit security policies from-zone UNTRUST to-zone TRUST\nset policy UNTRUST2TRUST match source-address any\nset policy UNTRUST2TRUST match destination-address NW1\nset policy UNTRUST2TRUST match application junos-https junos-http\nset policy UNTRUST2TRUST then permit\nset policy UNTRUST2TRUST then count\nshow", "desc": "Add Policy > create policy" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "edit security policies from-zone UNTRUST to-zone TRUST policy UNTRU...", "cmd": "edit security policies from-zone UNTRUST to-zone TRUST policy UNTRUST2TRUST \nset match source-address any\nset match destination-address NW1\nset match application junos-https junos-http\nset then permit\nset then count\nshow", "desc": "Add Policy > create policy" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "add smtp", "cmd": "add smtp\nset security policies from-zone untrust to-zone DMZ policy 03102013 match application junos-smtp", "desc": "Edit Policy" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show security flow session summary", "cmd": "show security flow session summary\nshow security flow session\nshow security flow session source-prefix x.x.x.x", "desc": "Check Session Clear Session" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session all", "cmd": "clear security flow session all\nshow security flow session source-prefix x.x.x.x destination-prefix x.x.x.x\nclear security flow session source-prefix x.x.x.x", "desc": "Check Session Clear Session" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route", "cmd": "show route", "desc": "Check" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route terse", "cmd": "show route terse", "desc": "Check" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "set routing-options static route 10.0.0.0/24 next-hop 192.168.1.2", "cmd": "set routing-options static route 10.0.0.0/24 next-hop 192.168.1.2", "desc": "How to configure static routing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "set routing-options static route default next-hop 192.168.1.2", "cmd": "set routing-options static route default next-hop 192.168.1.2", "desc": "How to configure static routing > Defautlt Gateway" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "lab@srx1> show vlans", "cmd": "lab@srx1> show vlans\nName Tag Interfaces\nVLAN10 10 fe-0/0/2.0, fe-0/0/3.0\nblue 20 fe-0/0/4.0, fe-0/0/5.0*\ndefault 1 None\npurple 30 fe-0/0/6.0*", "desc": "Checking Junos VLAN Configuration" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "lab@srx1> show vlans brief", "cmd": "lab@srx1> show vlans brief\n Ports\nName Tag Primary Address Active/Total\nVLAN10 10 0/2\nblue 20 1/2\ndefault 1\npurple 30 1/1", "desc": "Checking Junos VLAN Configuration" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "set vlans VLAN-NAME vlan-id VLAN-ID", "cmd": "set vlans VLAN-NAME vlan-id VLAN-ID\nset interfaces INTERFACE unit 0 family ethernet-switching vlan members VLAN-NAME", "desc": "Access Port" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "set vlans vlan10 vlan-id 10", "cmd": "set vlans vlan10 vlan-id 10\nset interfaces ge-0/0/1 unit 0 family ethernet-switching\nset interfaces ge-0/0/1 unit 0 family ethernet-switching port-mode access\nset interfaces ge-0/0/1 unit 0 family ethernet-switching vlan members vlan10", "desc": "Access Port" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set interfaces irb unit 10 family inet address 192.168.10.1/24", "cmd": "set interfaces irb unit 10 family inet address 192.168.10.1/24", "desc": "Access Port" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "set vlans V10 vlan-id 10", "cmd": "set vlans V10 vlan-id 10\nset vlans V20 vlan-id 20\nset interfaces ge-0/0/1 unit 0 family ethernet-switching\nset interfaces ge-0/0/1 unit 0 family ethernet-switching port-mode trunk\nset interfaces ge-0/0/1 unit 0 family ethernet-switching vlan members V10\nset interfaces ge-0/0/1 unit 0 family ethernet-switching vlan members V20", "desc": "Tagging Port" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "set interfaces ge-0/0/1 unit 0 family ethernet-switching native-vla...", "cmd": "set interfaces ge-0/0/1 unit 0 family ethernet-switching native-vlan-id 1", "desc": "Tagging Port" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp ", "cmd": "router bgp \n neighbor remote-as ", "desc": "a namebgpipv4/a BGP IPv4" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp ", "cmd": "router bgp \n neighbor remote-as \n address-family ipv4\n no neighbor activate\n exit-address-family\n address-family ipv6\n neighbor activate\n exit-address-family", "desc": "a namebgpipv6/aBGP IPv6" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp ", "cmd": "router bgp \n no bgp default ipv4-unicast", "desc": "a namebgpdisable/aBGP Disable IPv4 Unicast Default" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "L3-Switch(config)# interface ", "cmd": "L3-Switch(config)# interface \nL3-Switch(config-if)# no shutdown\nL3-Switch(config-if)# description \nL3-Switch(config-if)# switchport mode access\nL3-Switch(config-if)# switchport access vlan ", "desc": "IPv4 > Switch Interfaces > Layer-3-Switch switchport access vlan" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "L3-Switch(config)# interface ", "cmd": "L3-Switch(config)# interface \nL3-Switch(config-if)# no switchport\nL3-Switch(config-if)# description \nL3-Switch(config-if)# ip address ", "desc": "IPv4 > Switch Interfaces > Layer-3-Switch routed port" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch(config)# interface vlan ", "cmd": "Switch(config)# interface vlan \nSwitch(config-if)# description \nSwitch(config-if)# ip address ", "desc": "IPv4 > Switch Interfaces > Switched Virtual Interface (SVI)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Router(config)# interface ", "cmd": "Router(config)# interface \nRouter(config-if)# description \nRouter(config-if)# ip address ", "desc": "IPv4 > Router Interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Switch-or-Router(config)#interface Loopback ", "cmd": "Switch-or-Router(config)#interface Loopback \nSwitch-or-Router(config-if)# ip address ", "desc": "IPv4 > Loopback Interfaces" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch(config)# interface ", "cmd": "Switch(config)# interface \nSwitch(config-if)# no switchport\nSwitch(config-if)# description \nSwitch(config-if)# ipv6 address /\nSwitch(config-if)# ipv6 address link-local", "desc": "IPv6 > Switch Interfaces > Layer-3-Switch routed port" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch(config)# interface vlan ", "cmd": "Switch(config)# interface vlan \nSwitch(config-if)# description \nSwitch(config-if)# ipv6 address /\nSwitch(config-if)# ipv6 address link-local", "desc": "IPv6 > Switch Interfaces > Switched Virtual Interface (SVI)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Router(config)# interface ", "cmd": "Router(config)# interface \nRouter(config-if)# description \nRouter(config-if)# ipv6 address /\nRouter(config-if)# ipv6 address link-local", "desc": "IPv6 > Router Interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Switch-or-Router(config)#interface Loopback ", "cmd": "Switch-or-Router(config)#interface Loopback \nSwitch-or-Router(config-if)# ipv6 address /\nSwitch-or-Router(config-if)# ipv6 address link-local", "desc": "IPv6 > Loopback Interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "L3-Switch-or-Router(config-if)# ipv6 nd router-pref high", "cmd": "L3-Switch-or-Router(config-if)# ipv6 nd router-pref high", "desc": "IPv6 > Security > IPv6 RA Attack" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "L3-Switch-or-Router(config)# ipv6 nd raguard policy HOST", "cmd": "L3-Switch-or-Router(config)# ipv6 nd raguard policy HOST\nL3-Switch-or-Router(config-nd-raguard)# device-role host\nL3-Switch-or-Router(config)# ipv6 nd raguard policy ROUTER\nL3-Switch-or-Router(config-nd-raguard)# device-role router", "desc": "IPv6 > IPv6 RA Guard" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "L3-Switch-or-Router(config-if)# ipv6 nd raguard attach-policy ", "desc": "IPv6 > IPv6 RA Guard" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "L3-Switch-or-Router# show ipv6 nd raguard policy", "cmd": "L3-Switch-or-Router# show ipv6 nd raguard policy", "desc": "IPv6 > IPv6 RA Guard" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "L3-Switch-or-Router(config)# ip routing", "cmd": "L3-Switch-or-Router(config)# ip routing", "desc": "IPv4 > Enable IPv4 Routing Functionality" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip route ", "cmd": "ip route ", "desc": "IPv4 > Create a IPv4 static route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "L3-Switch-or-Router(config)# ipv6 unicast-routing", "cmd": "L3-Switch-or-Router(config)# ipv6 unicast-routing", "desc": "IPv6 > Enable IPv6 Routing Functionality" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "L3-Switch-or-Router(config)# ipv6 route ::/0 ", "cmd": "L3-Switch-or-Router(config)# ipv6 route ::/0 ", "desc": "IPv6 > Default Route to its IPv6 Gateway" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "L3-Switch-or-Router(config-if)# ipv6 dhcp client pd ", "cmd": "L3-Switch-or-Router(config-if)# ipv6 dhcp client pd \nL3-Switch-or-Router(config-if)# ipv6 address autoconfig default", "desc": "IPv6 > IPv6 Prefix Delegation with DHCP client" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "L3-Switch-or-Router(config-if)# ipv6 address /", "desc": "IPv6 > IPv6 Prefix Delegation with DHCP client" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "L3-Switch-or-Router(config-if)# ipv6 nd managed-config-flag", "cmd": "L3-Switch-or-Router(config-if)# ipv6 nd managed-config-flag", "desc": "IPv6 > Host interface to use stateful DHCP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "L3-Switch-or-Router(config-if)# ipv6 nd other-config-flag", "cmd": "L3-Switch-or-Router(config-if)# ipv6 nd other-config-flag", "desc": "IPv6 > Host interface to use stateless DHCP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "L3-Switch-or-Router# show ip protocols", "cmd": "L3-Switch-or-Router# show ip protocols", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface ", "cmd": "interface \n vrf forwarding ", "desc": "Verification > Add Interface To VRF" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "vrf definition ", "cmd": "vrf definition \n rd :", "desc": "Verification > VPN Route Distinguisher" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "vrf definition ", "cmd": "vrf definition \n route-target export :\n route-target import :", "desc": "Verification > Route Target" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ping ", "cmd": "ping ", "desc": "Connectivity > Ping" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ping source ", "cmd": "ping source \nping source ", "desc": "Connectivity > Ping With Specific Source" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ping vrf ", "cmd": "ping vrf ", "desc": "Connectivity > Ping From Specific VRF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "traceroute ", "cmd": "traceroute ", "desc": "Connectivity > Traceroute" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "show ip interface brief | include up", "cmd": "show ip interface brief | include up", "desc": "Verification > Overview Interface IP Addresses" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "show ip route", "cmd": "show ip route", "desc": "Verification > Display Routing Table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "show ip route vrf ", "cmd": "show ip route vrf ", "desc": "Verification > Display Routing Table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Switch-or-Router# show isis database level-1 verbose", "cmd": "Switch-or-Router# show isis database level-1 verbose\nSwitch-or-Router# show isis database level-2 verbose", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Switch-or-Router# show isis neighbors", "cmd": "Switch-or-Router# show isis neighbors", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "System Id Type Interface IP Address State Holdtime Circ...", "cmd": "System Id Type Interface IP Address State Holdtime Circuit Id\nR1 L1 Fa0/0 10.0.13.1 UP 8 R1.02\nR2 L1L2 Se0/0/0 10.0.23.2 UP 21 00\nSW2 L2 Fa0/1 10.0.203.20 UP 8 SW2.01", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Router(config)# router isis", "cmd": "Router(config)# router isis\nRouter(config-router)# net \nRouter(config-router)# is-type level-1 <-! for a Level2-Router: level-1-2\nRouter(config-router)# log-adjacency-changes", "desc": "Configuration > Routers" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Router(config)# interface ", "cmd": "Router(config)# interface \nRouter(config-if)# ip address \nRouter(config-if)# ip router isis\nRouter(config-if)# no shutdown", "desc": "Configuration > Routers" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "Switch(config)# ip routing", "cmd": "Switch(config)# ip routing\nSwitch(config)# router isis\nSwitch(config-switch)# net \nSwitch(config-switch)# log-adjacency-changes", "desc": "Configuration > Layer 3 Switches" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch(config)# interface ", "cmd": "Switch(config)# interface \nSwitch(config-if)# no switchport\nSwitch(config-if)# ip address \nSwitch(config-if)# ip router isis\nSwitch(config-if)# no shutdown", "desc": "Configuration > Layer 3 Switches" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Switch-or-Router(config)# ip access-list standard ", "cmd": "Switch-or-Router(config)# ip access-list standard \nSwitch-or-Router(config-acl)# permit ", "desc": "Redistribution > Route-maps" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Switch-or-Router(config)# route-map permit permit \nSwitch-or-Router(config-route-map)# match ip address ", "desc": "Redistribution > Route-maps" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Switch-or-Router(config)# router isis", "cmd": "Switch-or-Router(config)# router isis\nSwitch-or-Router(config-router)# redistribute connected route-maped level-1", "desc": "Redistribution > Route-maps" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Switch-or-Router(config)# ip access-list standard ", "cmd": "Switch-or-Router(config)# ip access-list standard \nSwitch-or-Router(config-acl)# permit ", "desc": "Route Leaking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Switch-or-Router(config)# route-map permit permit \nSwitch-or-Router(config-route-map)# match ip address ", "desc": "Route Leaking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Switch-or-Router(config)# router isis", "cmd": "Switch-or-Router(config)# router isis\nSwitch-or-Router(config-router)# redistribute isis ip level-2 into level-1 route-map ", "desc": "Route Leaking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface ", "cmd": "interface \nmpls ip", "desc": "Configuration > Fundamental" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "vrf definition ", "cmd": "vrf definition \n rd :\n route-target export \n route-target import \n address-family \n exit-address-family", "desc": "Configuration > VRF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "!Data-plane FIB", "cmd": "!Data-plane FIB\nsw01-pod-1#show ip cef\nPrefix Next Hop Interface\n0.0.0.0/0 no route\n0.0.0.0/8 drop\n0.0.0.0/32 receive\n10.0.0.0/24 10.0.1.254 GigabitEthernet1/0/22\n10.0.1.0/24 attached GigabitEthernet1/0/22\n10.0.1.0/32 receive GigabitEthernet1/0/22\n10.0.1.1/32 receive GigabitEthernet1/0/22\n10.0.1.254/32 attached GigabitEthernet1/0/22\n10.0.1.255/32 receive GigabitEthernet1/0/22\n10.0.2.0/24 10.0.1.254 GigabitEthernet1/0/22\n10.0.3.0/24 10.0.1.254 GigabitEthernet1/0/22\n10.0.4.0/24 10.0.1.254 GigabitEthernet1/0/22\n10.0.5.0/24 10.0.1.254 GigabitEthernet1/0/22\n10.0.6.0/24 10.0.1.254 GigabitEthernet1/0/22", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "sw01-pod-1#show mpls ldp neighbor", "cmd": "sw01-pod-1#show mpls ldp neighbor\n Peer LDP Ident: 10.255.1.3:0; Local LDP Ident 10.255.1.1:0\n\tTCP connection: 10.255.1.3.54557 - 10.255.1.1.646\n\tState: Oper; Msgs sent/rcvd: 3058/3048; Downstream\n\tUp time: 1d20h\n\tLDP discovery sources:\n\t GigabitEthernet1/0/24, Src IP addr: 10.1.13.3\n Addresses bound to peer LDP Ident:\n 10.1.13.3 10.255.1.3\n Peer LDP Ident: 10.255.255.255:0; Local LDP Ident 10.255.1.1:0\n\tTCP connection: 10.255.255.255.44172 - 10.255.1.1.646\n\tState: Oper; Msgs sent/rcvd: 1628/1622; Downstream\n\tUp time: 23:26:02\n\tLDP discovery sources:\n\t GigabitEthernet1/0/22, Src IP addr: 10.0.1.254\n Addresses bound to peer LDP Ident:\n 10.255.255.255 10.10.10.10 10.0.0.254 10.0.1.254\n 10.0.2.254 10.0.3.254 10.0.4.254 10.0.5.254\n 10.0.6.254 10.0.7.254 10.0.8.254 10.0.9.254", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "! Control-plane LIB", "cmd": "! Control-plane LIB\nsw03-pod-1#show mpls ldp bindings\n lib entry: 10.0.0.0/24, rev 32\n\tlocal binding: label: 1318\n\tremote binding: lsr: 10.255.1.1:0, label: 1117\n lib entry: 10.0.1.0/24, rev 8\n\tlocal binding: label: 1306\n\tremote binding: lsr: 10.255.1.1:0, label: exp-null\n lib entry: 10.0.2.0/24, rev 30\n\tlocal binding: label: 1317\n\tremote binding: lsr: 10.255.1.1:0, label: 1116\n lib entry: 10.0.3.0/24, rev 28\n\tlocal binding: label: 1316\n\tremote binding: lsr: 10.255.1.1:0, label: 1115\n lib entry: 10.0.4.0/24, rev 26\n\tlocal binding: label: 1315\n\tremote binding: lsr: 10.255.1.1:0, label: 1114", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "!Data-plane LFIB", "cmd": "!Data-plane LFIB\nshow mpls forwarding-table\nLocal Outgoing Prefix Bytes Label Outgoing Next Hop\nLabel Label or Tunnel Id Switched interface\n1300 explicit-n 10.255.1.1/32 0 Gi1/0/24 10.1.13.1\n1301 No Label 2001:DB8:1A:1::/64[V] \\\n 2520 aggregate/Cust_A\n1302 No Label 2001:DB8:1B::/64[V] \\\n 2304 aggregate/Cust_B\n1303 No Label 2001:DB8:1B:ABBA::/64[V] \\\n 0 Gi1/0/1 FE80::CE98:91FF:FE1A:864\n1304 No Label 2001:DB8:1B:BEEF::/64[V] \\\n 0 Gi1/0/1 FE80::CE98:91FF:FE1A:864\n1305 No Label 2001:DB8:1B:CAFE::/64[V] \\\n 0 Gi1/0/1 FE80::CE98:91FF:FE1A:864\n1306 explicit-n 10.0.1.0/24 0 Gi1/0/24 10.1.13.1\n1307 1104 10.255.255.255/32 \\\n 0 Gi1/0/24 10.1.13.1\nLocal Outgoing Prefix Bytes Label Outgoing Next Hop\nLabel Label or Tunnel Id Switched interface\n1308 1107 10.255.255.0/32 3186 Gi1/0/24 10.1.13.1\n1309 1108 10.10.10.0/24 0 Gi1/0/24 10.1.13.1", "desc": "Verification" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "BGP", "title": "sw01-pod-1#show ip bgp vpnv6 unicast rd 10.255.255.0:0 detail", "cmd": "sw01-pod-1#show ip bgp vpnv6 unicast rd 10.255.255.0:0 detail\nRoute Distinguisher: 10.255.255.0:0\nBGP routing table entry for [10.255.255.0:0]2001:DB8::/64, version 12\n Paths: (1 available, best #1, no table)\n Not advertised to any peer\n Refresh Epoch 2\n Local\n ::FFFF:10.255.255.0 (metric 3) (via default) from 10.10.10.10 (10.255.255.255)\n Origin incomplete, metric 0, localpref 100, valid, internal, best\n Extended Community: RT:0:0\n Originator: 10.255.255.0, Cluster list: 10.255.255.255\n mpls labels in/out nolabel/127\n rx pathid: 0, tx pathid: 0x0\nBGP routing table entry for [10.255.255.0:0]2001:DB8:ABBA::/64, version 13\n Paths: (1 available, best #1, no table)\n Not advertised to any peer\n Refresh Epoch 2\n Local\n ::FFFF:10.255.255.0 (metric 3) (via default) from 10.10.10.10 (10.255.255.255)\n Origin incomplete, metric 0, localpref 100, valid, internal, best\n Extended Community: RT:0:0\n Originator: 10.255.255.0, Cluster list: 10.255.255.255\n mpls labels in/out nolabel/128\n rx pathid: 0, tx pathid: 0x0", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "Switch(config)# ip routing", "cmd": "Switch(config)# ip routing", "desc": "Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Multicast", "title": "Switch(config)# ip multicast-routing", "cmd": "Switch(config)# ip multicast-routing", "desc": "Configuration" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch(config)# interface vlan ", "cmd": "Switch(config)# interface vlan \nSwitch(config-if)# ip igmp join-group ", "desc": "IGMP > Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Multicast", "title": "Switch(config-if)# ip igmp version 3", "cmd": "Switch(config-if)# ip igmp version 3", "desc": "IGMP > Configuration" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch# ip igmp snooping", "cmd": "Switch# ip igmp snooping\nSwitch# ip igmp snooping vlan ", "desc": "IGMP > Snooping" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch# show ip igmp snooping groups", "cmd": "Switch# show ip igmp snooping groups\nSwitch# show ip igmp snooping groups vlan \nSwitch# show ip igmp snooping querier", "desc": "IGMP > Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Multicast", "title": "Switch# debug ip igmp ", "cmd": "Switch# debug ip igmp ", "desc": "IGMP > Degugging" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Switch(config)# interface ", "cmd": "Switch(config)# interface \nSwitch(config-if)# ip pim dense-mode", "desc": "PIM Dense Mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Switch# interface vlan ", "cmd": "Switch# interface vlan \nSwitch(config)# ip pim dense-mode", "desc": "PIM Dense Mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Multicast", "title": "Switch# show ip pim neighbor", "cmd": "Switch# show ip pim neighbor", "desc": "PIM Dense Mode > Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Switch(config)# interface ", "cmd": "Switch(config)# interface \nSwitch(config-if)# ip pim sparse-mode", "desc": "PIM Sparse Mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Multicast", "title": "Switch(config)# ip pim rp-address ", "cmd": "Switch(config)# ip pim rp-address ", "desc": "PIM Sparse Mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Multicast", "title": "Switch(config)# ip pim ssm default", "cmd": "Switch(config)# ip pim ssm default", "desc": "Source Specific Multicast SSM" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Multicast", "title": "Switch(config-if)# ip igmp join-group sou...", "cmd": "Switch(config-if)# ip igmp join-group source ", "desc": "Source Specific Multicast SSM" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Switch# show mac address-table", "cmd": "Switch# show mac address-table", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Switch# show ip mroute", "cmd": "Switch# show ip mroute", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Multicast", "title": "Switch# show ip mroute ", "cmd": "Switch# show ip mroute ", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config)# router-id ", "cmd": "Router(config)# router-id ", "desc": "OSPFv2 Configuration > Router ID" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config)# router ospf ", "cmd": "Router(config)# router ospf \nRouter(config-router)# auto-cost reference-bandwidth 1000\nRouter(config-router)# network area ", "desc": "OSPFv2 Configuration > Single Area" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "router ospf ", "cmd": "router ospf \n network area ", "desc": "OSPFv2 Configuration > Multi-Area" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config)# router ospf ", "cmd": "Router(config)# router ospf \nRouter(config-router)# area stub", "desc": "OSPFv2 Configuration > Change Area into Stub Area" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config)# router ospf ", "cmd": "Router(config)# router ospf \nRouter(config-router)# area stub no-summary", "desc": "OSPFv2 Configuration > Change Area into Totally Stub Area" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config-if)# ip ospf area ", "cmd": "Router(config-if)# ip ospf area ", "desc": "OSPFv2 Configuration > Add Interface to OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config)# router ospf ", "cmd": "Router(config)# router ospf \nRouter(config-router)# passive-interface ", "desc": "OSPFv2 Configuration > Configure a Passive Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config-if)# clock rate 32000", "cmd": "Router(config-if)# clock rate 32000\nRouter(config-if)# bandwidth 32", "desc": "OSPFv2 Configuration > Set Link Speed on Serial Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config-if)# speed auto", "cmd": "Router(config-if)# speed auto", "desc": "OSPFv2 Configuration > Set Link Speed on Serial Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config)# router ospf ", "cmd": "Router(config)# router ospf \nRouter(config-router)# redistribute connected subnets", "desc": "OSPFv2 Configuration > Redistribute connected Subnets" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config)# router ospf ", "cmd": "Router(config)# router ospf \nRouter(config-if)# area virtual-link ", "desc": "OSPFv2 Configuration > Virtual Link" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip [route | protocols]", "cmd": "show ip [route | protocols]\nshow ip ospf interface\nshow ip ospf interface brief\nshow ip ospf neighbor\nshow ip ospf border-routers\nshow ip ospf virtual-links", "desc": "Verification" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf network point-to-point", "cmd": "ip ospf network point-to-point", "desc": "Point to Point OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "debug ip ospf ?", "cmd": "debug ip ospf ?\ndebug ip ospf packet -> OSPF protocol changes\ndebug ip ospf adj -> neighbor adjacency changes", "desc": "OSPF Debugging" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router(config)# no router ospf ", "cmd": "Router(config)# no router ospf ", "desc": "Remove OSPF Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "! Enable RIPv2 IPv4 routing", "cmd": "! Enable RIPv2 IPv4 routing\nRouter(config)# router rip\nRouter(config-router)# version 2", "desc": "a nameripv2configuration/aRIPv2 Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "! Disable RIPv2 automatic summarization", "cmd": "! Disable RIPv2 automatic summarization\nRouter(config-router)# no auto-summary", "desc": "a nameripv2configuration/aRIPv2 Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "! Designate RIPv2 interfaces by network", "cmd": "! Designate RIPv2 interfaces by network\nRouter(config-router)# network ", "desc": "a nameripv2configuration/aRIPv2 Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "! Enable IPv6 routing", "cmd": "! Enable IPv6 routing\nRouter(config)# ipv6 unicast-routing", "desc": "a nameripngconfiguration/aRIPng Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "! Enable RIPng IPv6 routing", "cmd": "! Enable RIPng IPv6 routing\nRouter(config)# ipv6 router rip ", "desc": "a nameripngconfiguration/aRIPng Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "! Enable RIPng on the interface", "cmd": "! Enable RIPng on the interface\nRouter(config)# interface \nRouter(config-if)# ipv6 rip enable", "desc": "a nameripngconfiguration/aRIPng Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip[v6] protocols", "cmd": "show ip[v6] protocols\nshow ip[v6] rip database\nshow ip[v6] route rip\ndebug ip rip { database | events }\ndebug ipv6 rip [interface]", "desc": "a nameriptrouble/aRIP Troubleshooting" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface ", "cmd": "interface \n switchport mode access\n switchport access vlan ", "desc": "a nameports/aPorts > Access Port" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface ", "cmd": "interface \n switchport mode trunk", "desc": "a nameports/aPorts > Trunk Port" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "user@JunOS> show version brief ", "cmd": "user@JunOS> show version brief \n user@JunOS> show ospf neighbor\n user@JunOS> show route \n user@JunOS> show route forwarding-table \n user@JunOS> show system processes extensive \n user@JunOS> show interfaces ge-0/0/0 extensive", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "user@JunOS> show system commits", "cmd": "user@JunOS> show system commits\n user@JunOS> rollbacks ?\n [edit]\n user@JunOS# set system host-name \n user@JunOS# edit routing-options static\n user@JunOS> edit interface ge-0/0/0\n [edit interface ge-0/0/0]\n user@JunOS# set.....\n user@JunOS# del.....\n user@JunOS# top --------> similar to do command \n user@JunOS# rollback \n user@JunOS> help topic routing-options static \n user@JunOS> help reference routing-options static", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "user@JunOS# run file list ---> equivalent of UNIX ls -l command ", "cmd": "user@JunOS# run file list ---> equivalent of UNIX ls -l command \n user@JunOS# run file show --> cat equivalent of UNIX \n user@JunOS# load merge \n user@JunOS# show | display set \n user@JunOS# show | display set relative \n user@JunOS# load override reset", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "user@JunOS# run show route 100/24", "cmd": "user@JunOS# run show route 100/24\n user@JunOS# edit routing-options static \n user@JunOS# deactivate route ip/prefix\n user@JunOS# show \n user@JunOS# run show route protocol static \n *********Shutdown equivalent of Cisco******\n user@JunOS# edit int xe-0/0/0\n user@JunOS# set disable \n user@JunOS# run show interface terse ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "**Deactivating and disabling are totally different thing**", "cmd": "**Deactivating and disabling are totally different thing**\n user@JunOS# clear system commit ?", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "user@JunOS# set system radius-server secret ", "cmd": "user@JunOS# set system radius-server secret \n user@JunOS# set system authentication-order radius \n user@JunOS# \nif an authentication method is unavailable because of network or server outage,\n the software automatically consults the local password database", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "user@JunOS# edit system archival configuration ", "cmd": "user@JunOS# edit system archival configuration \n user@JunOS# set archieve-sites \"ftp://ftp@172.25.11.254/archive\" password ftp \n user@JunOS# set transfer-on-commit", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "user@JunOS# set system syslog file messages any any", "cmd": "user@JunOS# set system syslog file messages any any", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "user@JunOS> show log messages | match transfer ", "cmd": "user@JunOS> show log messages | match transfer \nthe transfer is logged in the /var/log/messages file", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "user@JunOS# run show system syslog", "cmd": "user@JunOS# run show system syslog\n user@JunOS# edit system syslog \n user@JunOS# set file change-log info \nchange-log = facility \ninfo = severity", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "user@JunOS# set file messages any any ", "cmd": "user@JunOS# set file messages any any \nseverity level for the default messages file to any", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "user@JunOS# run show log ", "cmd": "user@JunOS# run show log ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "user@JunOS> show log FILENAME | last NUM ", "cmd": "user@JunOS> show log FILENAME | last NUM \nshow the most recent entries", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "user@JunOS# set system ntp server ", "cmd": "user@JunOS# set system ntp server ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "configure NTP boot server ", "cmd": "configure NTP boot server \n user@JunOS# set system ntp boot-server \n user@JunOS# show system ntp", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "manually force synchronization with the NTP server ", "cmd": "manually force synchronization with the NTP server \n user@JunOS> set date ntp", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "verify sync ", "cmd": "verify sync \n user@JunOS> show ntp associations", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "user@JunOS# set snmp community clients ", "cmd": "user@JunOS# set snmp community clients ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "testing SNMP configuration", "cmd": "testing SNMP configuration\n user@JunOS# set interface disable \n user@JunOS# run show interface terse", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "no shutdown ", "cmd": "no shutdown \n user@JunOS# delete interface disable", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "checking the interface up down state change in snmp ", "cmd": "checking the interface up down state change in snmp \n user@JunOS> show log messages | match | match snmp \n user@JunOS> show snmp statistics", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "user@JunOS# show snmp mib walk jnxOperatingDescr", "cmd": "user@JunOS# show snmp mib walk jnxOperatingDescr", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "check the status of routing protocol process(rpd)", "cmd": "check the status of routing protocol process(rpd)\n user@JunOS> show system processes extensive \n user@JunOS> show system processes extensive | match \"pid | rpd\"", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "view the protocol statistics ", "cmd": "view the protocol statistics \n user@JunOS> show system statistics \n user@JunOS> show system uptime \n user@JunOS> show system users", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "user@JunOS> show chassis routing-engine ", "cmd": "user@JunOS> show chassis routing-engine \n user@JunOS> show chassis location", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set the system location ", "cmd": "set the system location \n user@JunOS# set system location bulding \"DC Pod 2\" floor \n user@JunOS> show chassis hardware \n user@JunOS> show interface terse \n user@JunOS> show interface extensive\n user@JunOS> clear interface statistics \n user@JunOS> show interface extensive | find \"traffic\"", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "check the version ", "cmd": "check the version \n user@JunOS> show version", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "user@JunOS> show route ip exact ", "cmd": "user@JunOS> show route ip exact \n user@JunOS> show route \n user@JunOS> show route protocol ospf \n user@JunOS> show route forwarding table \n user@JunOS> show route instance \n user@JunOS# set static route qualified-next-hop \n preference 6", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "user@JunOS# delete static route ", "cmd": "user@JunOS# delete static route ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "user@JunOS> show route table .inet0", "cmd": "user@JunOS> show route table .inet0", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "user@JunOS> show interface terse routing-instance ", "cmd": "user@JunOS> show interface terse routing-instance ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "user@JunOS> ping rapid count routing-instance...", "cmd": "user@JunOS> ping rapid count routing-instance ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "user@JunOS> traceroute routing-instance ", "cmd": "user@JunOS> traceroute routing-instance ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "user@JunOS# set protocols ospf area interface interface \n [edit protocols ospf]\n user@JunOS# set area 0 interface ge-0/0/3.0 passive \n [edit protocols ospf]\n user@JunOS# set area 0 interface lo0.0", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "user@JunOS# set family inet6 address ", "cmd": "user@JunOS# set family inet6 address ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "point-to-point: /127", "cmd": "point-to-point: /127\n loopback: /128\n user@JunOS# set family inet6 ----> enables the ipv6 and adds link-local address \n user@JunOS# set family inet6 address /64 eui-64", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "user@JunOS# set rib inet6.0 static route fda9::2 next-hop fda1::2", "cmd": "user@JunOS# set rib inet6.0 static route fda9::2 next-hop fda1::2", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "user@JunOS# edit policy-options ", "cmd": "user@JunOS# edit policy-options \n user@JunOS# edit policy-statement \n user@JunOS# set term from protocol static \n user@JunOS# set term from route-filter 0/0 exact \n user@JunOS# set term then accept", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "user@JunOS# top edit protocols ospf ", "cmd": "user@JunOS# top edit protocols ospf \n user@JunOS# set export ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "user@JunOS# commit confirmed ", "cmd": "user@JunOS# commit confirmed \n -----> when configuring the firewall filters best to use so that we don't get locked out \n of the mgmt interface", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "user@JunOS> show firewall counter filter outbound-...", "cmd": "user@JunOS> show firewall counter filter outbound-accept \n user@JunOS> show firewall log \n user@JunOS> clear firewall filter ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "user@JunOS> show class-of-service forwarding-class ", "cmd": "user@JunOS> show class-of-service forwarding-class \n user@JunOS# edit class-of-service \n user@JunOS# set forwarding-classes queue 0 general-traffic \n user@JunOS# set forwarding-classes queue 1 important-traffic \n user@JunOS# set forwardig-classes queue 2 critical-traffic", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "user@JunOS> show interfaces queue ge-0/0/3", "cmd": "user@JunOS> show interfaces queue ge-0/0/3\n user@JunOS> show class-of-service interface ge-0/0/3 --> displays queue stat for the specified interface", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "user@JunOS> ping source rapid count ", "cmd": "user@JunOS> ping source rapid count \n user@JunOS> show interfaces gr-0/0/0.0 detail | find \"traffic statistics\"", "desc": "JunOS commands" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "[edit interface xe-0/0/2]", "cmd": "[edit interface xe-0/0/2]\n user@JunOS# set unit 0 family ethernet-switching interface-mode {access | trunk } vlan members ", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "user@JunOS> show ospf neighbor ", "cmd": "user@JunOS> show ospf neighbor \n Address Interface State ID Pri Dead\n 172.25.1.9 ge-0/0/1.0 Full 192.168.100.3 128 38\n 172.25.1.2 ge-0/0/2.0 Full 192.168.100.2 128 35", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show configuration interface ge-0/0/1.0", "cmd": "show configuration interface ge-0/0/1.0", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration firewall filter input-ff", "cmd": "show configuration firewall filter input-ff", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show", "cmd": "show", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show system authentication-order", "cmd": "show system authentication-order", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "user@JunOS> traceroute 10.1.15.2", "cmd": "user@JunOS> traceroute 10.1.15.2\n traceroute to 10.1.15.2 (10.1.15.2), 30 hops max, 40 byte packets \n 1 10.1.36.1 (10.1.36.1) 0.651ms 7.882ms 0.568ms\n 2 10.1.23.1 (10.1.23.1) 0.6ms 0.8ms 0.6ms\n 3 * * *\n 4 * * *\n 5 * * *", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "user@JunOS# show policy-options ", "cmd": "user@JunOS# show policy-options \n policy-statement block-routes {\n term 1{\n from {\n route-filter 10.10.10.0/24 longer;\n }\n then reject;\n }\n }", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "user@JunOS# edit interfaces ", "cmd": "user@JunOS# edit interfaces \n [edit interfaces]\n user@JunOS# edit ge-0/0/0 unit 0 family inet \n [edit interface ge-0/0/0 unit 0 family inet]\n user@JunOS# exit", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set protocols ospf export static-into-ospf ", "cmd": "set protocols ospf export static-into-ospf \n set protocols ospf area 0.0.0.0 interface em1.0\n set policy-options policy-statement static-into-ospf term static from protocol static \n set policy-options policy-statement static-into-ospf term static then accept", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "[edit policy-options]", "cmd": "[edit policy-options]\njcluser@vMX1# show \npolicy-statement static-into-OSPF {\n term Redistribute-static {\n from {\n protocol static;\n route-filter 0.0.0.0/0 exact;\n }\n then accept;\n }\n}\n[edit protocols ospf]\njcluser@vMX1# set export static-into-OSPF", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "jcluser@vMX1> show ospf database external extensive", "cmd": "jcluser@vMX1> show ospf database external extensive", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "[edit policy-options]", "cmd": "[edit policy-options]\njcluser@vMX1# show \npolicy-statement static-into-OSPF {\n term Redistribute-static {\n from {\n protocol static;\n route-filter 0.0.0.0/0 exact;\n }\n then accept;\n }\n term Redistribute-static-E1 {\n from {\n protocol static;\n route-filter 0.0.0.0/0 exact;\n }\n then {\n external {\n type 1;\n }\n accept;\n }\n }\n}", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit services rpm]", "cmd": "[edit services rpm]\njcluser@vMX1# show \nprobe Ping-GW {\n test ICMP {\n probe-type icmp-ping;\n target address 100.123.0.1;\n probe-count 10;\n probe-interval 3;\n }\n}", "desc": "JunOS commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "junoser -d config.txt", "cmd": "junoser -d config.txt\nset protocols bgp group ebgp-peers neighbor 192.0.2.2\nor\ncat config.txt | junoser -d\nset protocols bgp group ebgp-peers neighbor 192.0.2.2", "desc": "Getting Started > Usage > Syntax translation > Structured form into display set" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show running-config", "cmd": "show running-config", "desc": "Important show commands | display config saved in RAM (and the currently running configuration in the device)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show startup-config", "cmd": "show startup-config", "desc": "Important show commands | display config saved in NVRAM" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show history", "cmd": "show history", "desc": "Important show commands | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip route [network-address] [subnet-mask] ....", "cmd": "ip route [network-address] [subnet-mask] ....", "desc": "Static routing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip route [network-address] [subnet-mask] ([next-hop-ip] [exit-int])", "cmd": "ip route [network-address] [subnet-mask] ([next-hop-ip] [exit-int])", "desc": "Static routing > Standard Static Route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip route 0.0.0.0 0.0.0.0 ([next-hop-ip] [exit-int])", "cmd": "ip route 0.0.0.0 0.0.0.0 ([next-hop-ip] [exit-int])", "desc": "Static routing > Default Static Route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip route [network-address] [subnet-mask] ([next-hop-ip] [exit-int])...", "cmd": "ip route [network-address] [subnet-mask] ([next-hop-ip] [exit-int]) [AD]", "desc": "Static routing > Floating Static Route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip route [network-address] [subnet-mask*] ([next-hop-ip] [exit-int])", "cmd": "ip route [network-address] [subnet-mask*] ([next-hop-ip] [exit-int])", "desc": "Static routing > Summary Static Route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "router ospf [PID]", "cmd": "router ospf [PID]", "desc": "Dynamic routing OSPF > OSPF configuration | create OSPF process with Process ID [PID] (1 - 65535)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "router-id [a.b.c.d]", "cmd": "router-id [a.b.c.d]", "desc": "Dynamic routing OSPF > OSPF configuration | manually assign the router an ID, in an IPv4 address format." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf interface brief", "cmd": "show ip ospf interface brief", "desc": "Dynamic routing OSPF > OSPF verification | summary of router's OSPF-enabled interfaces. :warning: This command does NOT seem to work on Packet Tracer 7.3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf interface", "cmd": "show ip ospf interface", "desc": "Dynamic routing OSPF > OSPF verification | in-detail list of every OSPF-enabled interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf interface [int-id]", "cmd": "show ip ospf interface [int-id]", "desc": "Dynamic routing OSPF > OSPF verification | in-detail information for a particular OSPF-enabled interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface g0/0.[vlan-id]", "cmd": "interface g0/0.[vlan-id]", "desc": "Configuring Router-on-a-stick inter-VLAN routing | create the `.[vlan-id]` **subinterface** on interface Gigabit Ethernet 0/0" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "encapsulation dot1q [vlan-id]", "cmd": "encapsulation dot1q [vlan-id]", "desc": "Configuring Router-on-a-stick inter-VLAN routing | configure subinterface to operate on a specified VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "encapsulation dot1q [vlan-id] native", "cmd": "encapsulation dot1q [vlan-id] native", "desc": "Configuring Router-on-a-stick inter-VLAN routing | must be configured on the subinterfaace belonging to the **native** VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "ip address [ip-address] [subnet-mask]", "cmd": "ip address [ip-address] [subnet-mask]", "desc": "Configuring Router-on-a-stick inter-VLAN routing | :exclamation: don't forget to assign the subinterface an IP address!" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface g0/0", "cmd": "interface g0/0", "desc": "Configuring Router-on-a-stick inter-VLAN routing | access the Gigabit0/0 interface (i.e., the actual physical interface) to enable it" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "no shutdown", "cmd": "no shutdown", "desc": "Configuring Router-on-a-stick inter-VLAN routing | enable the physical interface. This enables **all** configured subinterfaces **on that interface**" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list [number] [permit/deny] [address] [wildcard mask]", "cmd": "access-list [number] [permit/deny] [address] [wildcard mask]", "desc": "nopedestrians Access Control Lists (ACL) > Procedure for configuring Standard Numbered ACLs | create entry in standard IPv4 ACL with specified number" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface [int-id]", "cmd": "interface [int-id]", "desc": "nopedestrians Access Control Lists (ACL) > Procedure for configuring Standard Numbered ACLs | select the interface to which the ACL will be applied" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ip access-group [number] [in/out]", "cmd": "ip access-group [number] [in/out]", "desc": "nopedestrians Access Control Lists (ACL) > Procedure for configuring Standard Numbered ACLs | activate the ACL on the selected interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "no access-list [number]", "cmd": "no access-list [number]", "desc": "nopedestrians Access Control Lists (ACL) > Procedure for configuring Standard Numbered ACLs | :warning: This **ERASES** the ACL, i.e., **EVERY ACE** (Access Control entry) **that makes it up**" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ip access-list [standard] [name]", "cmd": "ip access-list [standard] [name]", "desc": "nopedestrians Access Control Lists (ACL) > Procedure for configuring Standard Named ACLs | creates a standard named ACL. Will take you to standard (`std) named ACL (nacl`) configuration mode after entering it" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ip dhcp excludded-address [start-address (end-address)]", "cmd": "ip dhcp excludded-address [start-address (end-address)]", "desc": "DHCPv4 > Configure a Cisco router as a DHCPv4 server | exclude a single or a range of IPv4 addresses, i.e., these addresses will not be available for DHCP assignment to hosts" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ip dhcp pool [pool name]", "cmd": "ip dhcp pool [pool name]", "desc": "DHCPv4 > Configure a Cisco router as a DHCPv4 server | create and name the pool of available addresses to assign. Takes you to **DHCP config mode**." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "R1(dhcp-config)#default-router [address]", "cmd": "R1(dhcp-config)#default-router [address]", "desc": "DHCPv4 > Configure a Cisco router as a DHCPv4 server | specify the IPv4 address of the default gateway (router) the hosts will use" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ip helper address [DHCP-server-address]", "cmd": "ip helper address [DHCP-server-address]", "desc": "DHCPv4 > The ip helper address | indicates the router to relay (instead of discarding) DHCP messages to the DHCP server's address." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat inside source static [local-add] [global-add]", "cmd": "ip nat inside source static [local-add] [global-add]", "desc": "NAT > Configuring Static NAT | configure static nat, specifying the local address that will be mapped to a global address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat inside", "cmd": "ip nat inside", "desc": "NAT > Inside and outside interfaces | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat outside", "cmd": "ip nat outside", "desc": "NAT > Inside and outside interfaces | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat pool [pool-name] [start-address] [end-address] {netmask [mas...", "cmd": "ip nat pool [pool-name] [start-address] [end-address] {netmask [mask] \\", "desc": "NAT > Configuring Dynamic NAT | prefix-length [prefix-length]}``" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "access-list [number] {permit \\", "cmd": "access-list [number] {permit \\", "desc": "NAT > Configuring Dynamic NAT | deny} [source] [wildcard mask]``" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat inside source list [acl-number] pool [pool name]", "cmd": "ip nat inside source list [acl-number] pool [pool name]", "desc": "NAT > Configuring Dynamic NAT | we now bind the pool to the ACL" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby version 2", "cmd": "standby version 2", "desc": "HSRP | (optional) specify HSRP version 2 will be used. Otherwise, your HSRP instance will be running in version 1 by default." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby [group] ip [virtual-ip]", "cmd": "standby [group] ip [virtual-ip]", "desc": "HSRP | specify the router group and the virtual gateway's IP address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby [group] priority [0-255]", "cmd": "standby [group] priority [0-255]", "desc": "HSRP | (optional) specify each router a priority for **active router** election" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby [group] preempt", "cmd": "standby [group] preempt", "desc": "HSRP | (optional) enables **preemption**, i.e., a router with higher priority will take the active role if current active router's priority is lower" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby [group] timers [hello-timer] [hold-timer]", "cmd": "standby [group] timers [hello-timer] [hold-timer]", "desc": "HSRP | specify hello and hold (dead) timers. HSRP automatically ensures that the hold timer value is greater than the hello timer value to avoid incorrect behavior." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "router rip", "cmd": "router rip", "desc": "Dynamic routing RIP > RIPv1 configuration | enter router configuration mode, with RIP as the routing protocol" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "passive-interface [int-id]", "cmd": "passive-interface [int-id]", "desc": "Dynamic routing RIP > RIPv1 configuration | (optional) - prevent an interface from sending RIP updates" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "no auto-summary", "cmd": "no auto-summary", "desc": "Dynamic routing RIP > RIPv2 configuration | disable network auto summarization" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp [AS-number]", "cmd": "router eigrp [AS-number]", "desc": "Dynamic routing EIGRP > EIGRP Configuration | [AS-number] value range: 1-65535." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "eigrp router-id [a.b.c.d]", "cmd": "eigrp router-id [a.b.c.d]", "desc": "Dynamic routing EIGRP > EIGRP Configuration | (optional) manually configure a **router ID**, in an IPv4 address format" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip eigrp neighbors", "cmd": "show ip eigrp neighbors", "desc": "Dynamic routing EIGRP > EIGRP Verification | displays the nighbor table. Use it to verify the router recognizes its neighbors." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip route eigrp", "cmd": "show ip route eigrp", "desc": "Dynamic routing EIGRP > EIGRP Verification | display **only EIGRP** entries in the routing table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip eigrp interface", "cmd": "show ip eigrp interface", "desc": "Dynamic routing EIGRP > EIGRP Verification | verifies which interface are enabled for EIGRP, number of peers, and transmit queues" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip hello-interval eigrp [AS-number] [time in seconds]", "cmd": "ip hello-interval eigrp [AS-number] [time in seconds]", "desc": "Dynamic routing EIGRP > EIGRP Fine tuning | modify hello interval on IPv4. :warning: this is done in **interface configuration mode**" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 hello-interval eigrp [AS-number] [time in seconds]", "cmd": "ipv6 hello-interval eigrp [AS-number] [time in seconds]", "desc": "Dynamic routing EIGRP > EIGRP Fine tuning | modify hello interval on IPv6. :warning: this is done in **interface configuration mode**" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip hold-time eigrp [AS-number] [time in seconds]", "cmd": "ip hold-time eigrp [AS-number] [time in seconds]", "desc": "Dynamic routing EIGRP > EIGRP Fine tuning | modify hold timer length on IPv4 :warning: this is done in **interface configuration mode**" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 hold-time eigrp [AS-number] [time in seconds]", "cmd": "ipv6 hold-time eigrp [AS-number] [time in seconds]", "desc": "Dynamic routing EIGRP > EIGRP Fine tuning | modify hold timer length on IPv6 :warning: this is done in **interface configuration mode**" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 unicast-routing", "cmd": "ipv6 unicast-routing", "desc": "Dynamic routing EIGRP for IPv6 > Configuration | this **global configuration command** enables the router to forward IPv6 packets" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 router eigrp [AS-number]", "cmd": "ipv6 router eigrp [AS-number]", "desc": "Dynamic routing EIGRP for IPv6 > Configuration | enter router configuration mode for EIGRP for IPv6, specifying the AS number" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 eigrp [AS-number]", "cmd": "ipv6 eigrp [AS-number]", "desc": "Dynamic routing EIGRP for IPv6 > Configuration | use this command with the AS-number you used when configuring EIGRP for IPv6 on **each desired interface**" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 protocols", "cmd": "show ipv6 protocols", "desc": "Dynamic routing EIGRP for IPv6 > Verification | verifies the current configured values for EIGRP (and any additional enabled routing protocol on the device)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 eigrp neighbors", "cmd": "show ipv6 eigrp neighbors", "desc": "Dynamic routing EIGRP for IPv6 > Verification | displays the nighbor table. Use it to verify the router recognizes its neighbors." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 route eigrp", "cmd": "show ipv6 route eigrp", "desc": "Dynamic routing EIGRP for IPv6 > Verification | display **only EIGRP** entries in the routing table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 eigrp interface", "cmd": "show ipv6 eigrp interface", "desc": "Dynamic routing EIGRP for IPv6 > Verification | verifies which interface are enabled for EIGRP, number of peers, and transmit queues" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "S1#show running-config", "cmd": "S1#show running-config", "desc": "Important show commands | N/A" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "S1#show history", "cmd": "S1#show history", "desc": "Important show commands | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "S1#show interface [int-id]", "cmd": "S1#show interface [int-id]", "desc": "Important show commands | useful to detect errors or verify packets are being sent and received" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "S1#show mac address-table", "cmd": "S1#show mac address-table", "desc": "Important show commands | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "S1#show port-security", "cmd": "S1#show port-security", "desc": "Important show commands | displays Port Security configuration for all interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "S1#show port-security interface [int-id]", "cmd": "S1#show port-security interface [int-id]", "desc": "Important show commands | display Port Security configuration of an interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1#show vlan", "cmd": "S1#show vlan", "desc": "Important show commands | " }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1#show vlan brief", "cmd": "S1#show vlan brief", "desc": "Important show commands | **only** displays VLANs, statuses, names, and assigned ports" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1#show interface vlan [id]", "cmd": "S1#show interface vlan [id]", "desc": "Important show commands | " }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1#show interfaces trunk", "cmd": "S1#show interfaces trunk", "desc": "Important show commands | " }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config)#vlan [vlan-ID]", "cmd": "S1(config)#vlan [vlan-ID]", "desc": "VLANs > Configuring VLANs | create VLAN and assign its VLAN number" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-vlan)#name [someName]", "cmd": "S1(config-vlan)#name [someName]", "desc": "VLANs > Configuring VLANs | assign a name to the VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config)#interface [int-id]", "cmd": "S1(config)#interface [int-id]", "desc": "VLANs > Configuring VLANs | remember, `interface range` might be useful" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport mode access", "cmd": "S1(config-if)#switchport mode access", "desc": "VLANs > Configuring VLANs | " }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport access vlan [vlan-id]", "cmd": "S1(config-if)#switchport access vlan [vlan-id]", "desc": "VLANs > Configuring VLANs | assign/change port VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config)#no vlan [vlan-id]", "cmd": "S1(config)#no vlan [vlan-id]", "desc": "VLANs > Deleting a VLAN | :warning: deletes specified VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config)#delete flash:vlan.dat", "cmd": "S1(config)#delete flash:vlan.dat", "desc": "VLANs > Deleting a VLAN | :warning: erases **the whole VLAN database**" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#no switchport access vlan [vlan-id]", "cmd": "S1(config-if)#no switchport access vlan [vlan-id]", "desc": "VLANs > Removing interface(s) from a VLAN | remove the VLAN from the port" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport mode trunk", "cmd": "S1(config-if)#switchport mode trunk", "desc": "VLANs > Configuring IEEE 802.1q trunk links | " }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport trunk native vlan [vlan-id]", "cmd": "S1(config-if)#switchport trunk native vlan [vlan-id]", "desc": "VLANs > Configuring IEEE 802.1q trunk links | " }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport trunk allowed vlan [vlan-list]", "cmd": "S1(config-if)#switchport trunk allowed vlan [vlan-list]", "desc": "VLANs > Configuring IEEE 802.1q trunk links | **All** allowed VLAN IDs." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport trunk allowed vlan remove [vlan-id]", "cmd": "S1(config-if)#switchport trunk allowed vlan remove [vlan-id]", "desc": "VLANs > Configuring IEEE 802.1q trunk links | :no_pedestrians: **PROHIBITS ONLY** the VLAN with the specified ID on the trunk interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport mode dynamic auto", "cmd": "S1(config-if)#switchport mode dynamic auto", "desc": "VLANs > Dynamic Trunking Protocol (DTP) | interface will convert into a **trunk interface** if its neighboring interface is in **mode `trunk or desirable` ONLY**" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport mode dynamic desirable", "cmd": "S1(config-if)#switchport mode dynamic desirable", "desc": "VLANs > Dynamic Trunking Protocol (DTP) | interface will convert into a **trunk interface** if its neighboring interface is in **mode `trunk, dynamic auto, or dynamic desirable` ONLY**" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport nonegotiate", "cmd": "S1(config-if)#switchport nonegotiate", "desc": "VLANs > Dynamic Trunking Protocol (DTP) | :no_entry: stops DTP negotiation, in which interfaces may engage, as you saw above, i.e., an interface will NOT change its mode even if the neighboring interface could change it through negotiation" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1#show interfaces [int-id] switchport", "cmd": "S1#show interfaces [int-id] switchport", "desc": "VLANs > Troubleshooting VLANs | helpful in verifying an inactive VLAN is assigned to a port" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport voice vlan [vlan-id]", "cmd": "S1(config-if)#switchport voice vlan [vlan-id]", "desc": "VLANs > Voice VLANs | assign a voice VLAN to that port" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "S1#show ip ssh", "cmd": "S1#show ip ssh", "desc": "Configuring SSH | Use it to verify that the switch supports SSH" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "S1(config)#ip domain-name [domain-name]", "cmd": "S1(config)#ip domain-name [domain-name]", "desc": "Configuring SSH | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "S1(config)#crypto key generate rsa", "cmd": "S1(config)#crypto key generate rsa", "desc": "Configuring SSH | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "S1(config)#line vty 0 15", "cmd": "S1(config)#line vty 0 15", "desc": "Configuring SSH | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "S1(config-line)#transport input ssh", "cmd": "S1(config-line)#transport input ssh", "desc": "Configuring SSH | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "S1(config-line)#login local", "cmd": "S1(config-line)#login local", "desc": "Configuring SSH | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "S1(config-line)#exit", "cmd": "S1(config-line)#exit", "desc": "Configuring SSH | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "S1(config)#ip ssh version 2", "cmd": "S1(config)#ip ssh version 2", "desc": "Configuring SSH | enable SSH version 2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "S1(config)#crypto key zeroise rsa", "cmd": "S1(config)#crypto key zeroise rsa", "desc": "Configuring SSH | :warning: use to **delete** RSA key pair" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "S1(config)#ip ssh time-out [time]", "cmd": "S1(config)#ip ssh time-out [time]", "desc": "Configuring SSH > Modifying SSH configuration | Change timeout setting (time in seconds)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "S1(config)#ip ssh authentication-retries [retries]", "cmd": "S1(config)#ip ssh authentication-retries [retries]", "desc": "Configuring SSH > Modifying SSH configuration | Change number of allowed authentication attempts" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport port-security", "cmd": "S1(config-if)#switchport port-security", "desc": "Port Security > closedlockwithkey Configuring Dynamic Port Security | Enable port security on the interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport port-security violation [violation-mode]", "cmd": "S1(config-if)#switchport port-security violation [violation-mode]", "desc": "Port Security > closedlockwithkey Configuring Dynamic Port Security | set violation mode (`protect, restrict, shutdown`)" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport port-security maximum [max-addresses]", "cmd": "S1(config-if)#switchport port-security maximum [max-addresses]", "desc": "Port Security > closedlockwithkey Configuring Sticky Port Security | Set maximum number of secure MAC addresses allowed on port" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport port-security mac-address sticky", "cmd": "S1(config-if)#switchport port-security mac-address sticky", "desc": "Port Security > closedlockwithkey Configuring Sticky Port Security | Enable sticky learning" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "S1#show port-security address", "cmd": "S1#show port-security address", "desc": "Port Security > closedlockwithkey whitecheckmark Verifying Port Security secure MAC addresses | displays secure MAC addresses configured on **all switch interfaces**" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "S1#show interface [int-id] status", "cmd": "S1#show interface [int-id] status", "desc": "Port Security > closedlockwithkey whitecheckmark Verifying Port Security secure MAC addresses | displays port status. Useful to verify if an interface is in `err-disabled` status." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1#show vtp status", "cmd": "S1#show vtp status", "desc": "VLAN trunking protocol (VTP) > VTP verification | verify your configuration and the status of VTP on the device" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1#show vtp password", "cmd": "S1#show vtp password", "desc": "VLAN trunking protocol (VTP) > VTP verification | verify the configured VTP password" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config)#spanning-tree vlan [vlan-id] root primary", "cmd": "S1(config)#spanning-tree vlan [vlan-id] root primary", "desc": "Spanning Tree Protocol > Bridge ID configuration | ensures this switch has the lowest priority value" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config)#spanning-tree vlan [vlan-id] root secondary", "cmd": "S1(config)#spanning-tree vlan [vlan-id] root secondary", "desc": "Spanning Tree Protocol > Bridge ID configuration | Use if the configuration of an alternative bridge is desired. Sets the switch priority value to ensure it becomes the root bridge if the primary root bridge fails." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config)#spanning-tree vlan [vlan-id] priority [priority]", "cmd": "S1(config)#spanning-tree vlan [vlan-id] priority [priority]", "desc": "Spanning Tree Protocol > Bridge ID configuration | manually configure the bridge's priority value" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1#show spanning-tree", "cmd": "S1#show spanning-tree", "desc": "Spanning Tree Protocol > Bridge ID Verification | verify current spanning-tree instances and root bridges" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1(config)#interface range [int-type][lowest-id]-[highest-id]", "cmd": "S1(config)#interface range [int-type][lowest-id]-[highest-id]", "desc": "Spanning Tree Protocol > PortFast and BPDU guard | access a range of contiguous interfaces if necessary" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1(config-if)#spanning-tree portfast", "cmd": "S1(config-if)#spanning-tree portfast", "desc": "Spanning Tree Protocol > PortFast and BPDU guard | enables PortFast on the access port(s)" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1(config-if)#spanning-tree bpduguard enable", "cmd": "S1(config-if)#spanning-tree bpduguard enable", "desc": "Spanning Tree Protocol > PortFast and BPDU guard | enables BPDU Guard on the access port(s)" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1(config)#spanning-tree portfast default", "cmd": "S1(config)#spanning-tree portfast default", "desc": "Spanning Tree Protocol > PortFast and BPDU guard | :warning: configures PortFast to be the default for all switch interfaces" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1(config)#spanning-tree bpduguard default", "cmd": "S1(config)#spanning-tree bpduguard default", "desc": "Spanning Tree Protocol > PortFast and BPDU guard | :warning: configures BPDU Guard to be the default for all switch interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1#show running-config interface [int-id]", "cmd": "S1#show running-config interface [int-id]", "desc": "Spanning Tree Protocol > PortFast and BPDU guard verification | display the current configuration portion corresponding to the interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1(config)#spanning-tree mode rapid-pvst", "cmd": "S1(config)#spanning-tree mode rapid-pvst", "desc": "Spanning Tree Protocol > Configuring Rapid PVST | configure Rapid PVST+ as the STP mode on the switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1(config-if)#spanning-tree link-type point-to-point", "cmd": "S1(config-if)#spanning-tree link-type point-to-point", "desc": "Spanning Tree Protocol > Configuring Rapid PVST | specify that a link is point-to-point" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1#clear spanning-tree detected-protocols (interface [int-id])", "cmd": "S1#clear spanning-tree detected-protocols (interface [int-id])", "desc": "Spanning Tree Protocol > Configuring Rapid PVST | forces renegotiation with neighboring switches on all interfaces or the specified interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1#show spanning-tree active", "cmd": "S1#show spanning-tree active", "desc": "Spanning Tree Protocol > General STP verification commands | display STP information for active interfaces only" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1#show spanning-tree brief", "cmd": "S1#show spanning-tree brief", "desc": "Spanning Tree Protocol > General STP verification commands | at-a-glance information for all STP instances running on the switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1#show spanning-tree detail", "cmd": "S1#show spanning-tree detail", "desc": "Spanning Tree Protocol > General STP verification commands | detailed information for all STP instances running on the switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1#show spanning-tree interface [int-id]", "cmd": "S1#show spanning-tree interface [int-id]", "desc": "Spanning Tree Protocol > General STP verification commands | STP information for the specified interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1#show spanning-tree vlan [vlan-id]", "cmd": "S1#show spanning-tree vlan [vlan-id]", "desc": "Spanning Tree Protocol > General STP verification commands | STP information for the specified VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "S1#show spanning-tree summary", "cmd": "S1#show spanning-tree summary", "desc": "Spanning Tree Protocol > General STP verification commands | summary of STP port states" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EtherChannel", "title": "S1(config)#interface range [start-int]-[end-int]", "cmd": "S1(config)#interface range [start-int]-[end-int]", "desc": "EtherChannel | start by selecting the interfaces to be bundled into a **single logical link**, i.e., the EtherChannel." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "EtherChannel", "title": "S1(config)#interface port-channel [number]", "cmd": "S1(config)#interface port-channel [number]", "desc": "EtherChannel | enter the **port channel interface configuration mode** to change settings" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport trunk native vlan [native-vlan-id]", "cmd": "S1(config-if)#switchport trunk native vlan [native-vlan-id]", "desc": "EtherChannel > PortChannel interface additional configuration | specify the link's native VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport trunk allowed vlan [vlan-id-1 (,vlan-id-2,...", "cmd": "S1(config-if)#switchport trunk allowed vlan [vlan-id-1 (,vlan-id-2,...)]", "desc": "EtherChannel > PortChannel interface additional configuration | specify allowed VLANs (VLAN IDs) on trunk link" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "S1(config-if)#switchport trunk allowed vlan add [vlan-id-1 (,vlan-i...", "cmd": "S1(config-if)#switchport trunk allowed vlan add [vlan-id-1 (,vlan-id-2,...)]", "desc": "EtherChannel > PortChannel interface additional configuration | **add** VLANs to the list of **already allowed** VLANs on the trunk link" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Save config", "cmd": "copy running-config startup-config\n! short form: write memory", "desc": "Persist running config to NVRAM." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Reload device", "cmd": "reload\n! schedule reload: reload in 30", "desc": "Reboot the device (with optional schedule)." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Show inventory", "cmd": "show inventory", "desc": "Chassis, line cards, SFP/transceiver inventory." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Show environment", "cmd": "show environment all", "desc": "PSU, fans, temperature sensors." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Show CPU", "cmd": "show processes cpu sorted | exclude 0.00", "desc": "Top processes by CPU usage." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Show memory", "cmd": "show memory statistics", "desc": "Memory pools and free/used." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Set hostname", "cmd": "configure terminal\nhostname R1", "desc": "Configure device hostname." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Set clock / timezone", "cmd": "clock timezone UTC 0\nclock set 12:00:00 1 Jan 2026", "desc": "Configure system time and timezone." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Show file system", "cmd": "show file systems\ndir flash:", "desc": "List storage devices and contents." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Copy file (TFTP/SCP)", "cmd": "copy tftp: flash:\ncopy scp: flash:", "desc": "Transfer files via TFTP/SCP." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Enable mode / privilege", "cmd": "enable\ndisable\nconfigure terminal", "desc": "Privilege escalation and config mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Show boot variable", "cmd": "show boot", "desc": "Configured boot image and config-register." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "Show license", "cmd": "show license\nshow license udi", "desc": "License status (Smart Licensing / classic)." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Show interfaces", "cmd": "show interfaces\nshow interfaces GigabitEthernet0/0", "desc": "Interface status, counters, errors." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Show interface description", "cmd": "show interfaces description", "desc": "Per-interface descriptions and status." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Configure IP address", "cmd": "interface GigabitEthernet0/0\n description WAN-uplink\n ip address 10.0.0.1 255.255.255.252\n no shutdown", "desc": "Assign IPv4 address and enable interface." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Configure IPv6 address", "cmd": "interface GigabitEthernet0/0\n ipv6 address 2001:db8::1/64\n ipv6 enable", "desc": "Assign IPv6 address." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Subinterface (802.1Q)", "cmd": "interface GigabitEthernet0/0.10\n encapsulation dot1Q 10\n ip address 192.168.10.1 255.255.255.0", "desc": "VLAN-tagged subinterface for router-on-a-stick." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Loopback", "cmd": "interface Loopback0\n ip address 1.1.1.1 255.255.255.255", "desc": "Logical loopback interface (router-id, BGP source)." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "MTU / IP MTU", "cmd": "interface Gi0/0\n mtu 9216\n ip mtu 9000\n ipv6 mtu 9000", "desc": "L2 MTU and L3 MTU." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Speed / duplex", "cmd": "interface Gi0/0\n speed 1000\n duplex full", "desc": "Force speed and duplex." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Clear counters", "cmd": "clear counters\nclear counters GigabitEthernet0/0", "desc": "Reset interface statistics." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Shutdown / no shutdown", "cmd": "interface Gi0/1\n shutdown\n no shutdown", "desc": "Administratively disable/enable interface." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Interfaces", "title": "Etherchannel / Port-channel", "cmd": "interface range Gi1/0/1-2\n channel-group 1 mode active\ninterface Port-channel1\n switchport mode trunk", "desc": "LACP bundle of two interfaces." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "Show optics / transceiver", "cmd": "show interfaces transceiver detail", "desc": "SFP/QSFP DDM (RX/TX power, temp)." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Create VLAN", "cmd": "vlan 100\n name USERS", "desc": "Create a VLAN with a name." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Access port", "cmd": "interface Gi1/0/1\n switchport mode access\n switchport access vlan 100", "desc": "Tag-untagged single-VLAN port." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Trunk port", "cmd": "interface Gi1/0/24\n switchport trunk encapsulation dot1q\n switchport mode trunk\n switchport trunk allowed vlan 100,200,300", "desc": "802.1Q trunk allowing specific VLANs." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Voice VLAN", "cmd": "interface Gi1/0/2\n switchport mode access\n switchport access vlan 10\n switchport voice vlan 20", "desc": "Data + voice VLAN on the same port." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Show MAC address-table", "cmd": "show mac address-table\nshow mac address-table dynamic vlan 100", "desc": "L2 forwarding table." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Spanning-tree show", "cmd": "show spanning-tree\nshow spanning-tree vlan 100", "desc": "STP roles, state, root info." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Rapid-PVST / MST", "cmd": "spanning-tree mode rapid-pvst\n! or:\nspanning-tree mode mst", "desc": "Select STP mode." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Portfast / BPDU guard", "cmd": "interface Gi1/0/5\n spanning-tree portfast\n spanning-tree bpduguard enable", "desc": "Edge-port hardening." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "Static route", "cmd": "ip route 10.10.10.0 255.255.255.0 10.0.0.2\nipv6 route 2001:db8:10::/64 2001:db8::2", "desc": "IPv4/IPv6 static routes." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "Default route", "cmd": "ip route 0.0.0.0 0.0.0.0 10.0.0.2", "desc": "Quad-zero default." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "Floating static", "cmd": "ip route 10.10.10.0 255.255.255.0 10.0.0.6 200", "desc": "Backup route with higher administrative distance." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "Show IP route", "cmd": "show ip route\nshow ip route bgp\nshow ip route 10.10.10.0", "desc": "Routing table by protocol or prefix." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "Show route summary", "cmd": "show ip route summary", "desc": "Counts of routes per protocol." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "OSPF basic config", "cmd": "router ospf 1\n router-id 1.1.1.1\n network 10.0.0.0 0.0.0.255 area 0\n passive-interface default\n no passive-interface Gi0/0", "desc": "Single-process OSPF v2." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "OSPF on interface (modern)", "cmd": "interface Gi0/0\n ip ospf 1 area 0\n ip ospf network point-to-point\n ip ospf hello-interval 5\n ip ospf dead-interval 20", "desc": "Per-interface OSPF (preferred for clarity)." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "OSPFv3 (IPv6)", "cmd": "ipv6 router ospf 1\n router-id 1.1.1.1\ninterface Gi0/0\n ipv6 ospf 1 area 0", "desc": "OSPFv3 for IPv6." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Show OSPF neighbors", "cmd": "show ip ospf neighbor\nshow ipv6 ospf neighbor", "desc": "OSPF adjacencies." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Show OSPF database", "cmd": "show ip ospf database", "desc": "LSDB summary." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "OSPF authentication", "cmd": "interface Gi0/0\n ip ospf authentication message-digest\n ip ospf message-digest-key 1 md5 SECRET", "desc": "MD5 authentication." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "EIGRP classic", "cmd": "router eigrp 100\n network 10.0.0.0 0.0.0.255\n no auto-summary", "desc": "Classic EIGRP autonomous system." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "EIGRP named", "cmd": "router eigrp CORP\n address-family ipv4 unicast autonomous-system 100\n network 10.0.0.0 0.0.0.255", "desc": "Named EIGRP (recommended modern form)." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "Show EIGRP neighbors", "cmd": "show ip eigrp neighbors\nshow ip eigrp topology", "desc": "Neighbors and topology table." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "BGP basic config", "cmd": "router bgp 65001\n bgp router-id 1.1.1.1\n neighbor 10.0.0.2 remote-as 65002\n address-family ipv4\n network 10.10.10.0 mask 255.255.255.0\n neighbor 10.0.0.2 activate", "desc": "Single eBGP peer." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "BGP iBGP + loopback", "cmd": "router bgp 65001\n neighbor 2.2.2.2 remote-as 65001\n neighbor 2.2.2.2 update-source Loopback0\n neighbor 2.2.2.2 next-hop-self", "desc": "iBGP peering sourced from loopback." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "Show BGP summary", "cmd": "show ip bgp summary\nshow bgp ipv4 unicast summary", "desc": "Neighbor uptime + prefix counts." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "Show BGP routes", "cmd": "show ip bgp\nshow ip bgp 10.10.10.0/24\nshow ip bgp neighbors 10.0.0.2 advertised-routes", "desc": "BGP table and advertised/received per neighbor." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "Clear BGP neighbor (soft)", "cmd": "clear ip bgp 10.0.0.2 soft\nclear ip bgp * soft in", "desc": "Soft-reset to re-apply policy without dropping session." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "BGP prefix-list filter", "cmd": "ip prefix-list ALLOW seq 5 permit 10.10.10.0/24\nrouter bgp 65001\n neighbor 10.0.0.2 prefix-list ALLOW out", "desc": "Outbound prefix filter." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "BGP route-map (set local-pref)", "cmd": "route-map PREF permit 10\n set local-preference 200\nrouter bgp 65001\n neighbor 10.0.0.2 route-map PREF in", "desc": "Influence inbound path selection." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "BGP MD5 auth", "cmd": "router bgp 65001\n neighbor 10.0.0.2 password 7 SECRET", "desc": "TCP MD5 authentication." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Standard ACL", "cmd": "access-list 10 permit 10.10.10.0 0.0.0.255\naccess-list 10 deny any log", "desc": "Numbered standard ACL." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Extended (named) ACL", "cmd": "ip access-list extended WEB\n permit tcp any host 10.10.10.10 eq 443\n deny ip any any log\ninterface Gi0/0\n ip access-group WEB in", "desc": "Named L3/L4 ACL applied to an interface." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "Show ACL hit counts", "cmd": "show access-lists\nshow ip access-lists WEB", "desc": "Per-line counters." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "VTY access control", "cmd": "line vty 0 4\n access-class MGMT in\n transport input ssh\n login local", "desc": "Restrict management plane access." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "Static NAT (1:1)", "cmd": "ip nat inside source static 10.10.10.10 198.51.100.10\ninterface Gi0/0\n ip nat outside\ninterface Gi0/1\n ip nat inside", "desc": "1-to-1 mapping inside↔outside." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "PAT (overload)", "cmd": "access-list 1 permit 10.10.10.0 0.0.0.255\nip nat inside source list 1 interface Gi0/0 overload", "desc": "Many-to-one with port reuse." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "Show NAT translations", "cmd": "show ip nat translations\nshow ip nat statistics", "desc": "Active translations and counters." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "QoS", "title": "Class-map / policy-map", "cmd": "class-map match-any VOICE\n match dscp ef\npolicy-map WAN-OUT\n class VOICE\n priority percent 30\ninterface Gi0/0\n service-policy output WAN-OUT", "desc": "MQC: classify, mark, queue." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "QoS", "title": "Show policy-map", "cmd": "show policy-map interface Gi0/0", "desc": "Per-class counters and drops." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "HSRP", "cmd": "interface Vlan10\n ip address 10.10.10.2 255.255.255.0\n standby 10 ip 10.10.10.1\n standby 10 priority 110\n standby 10 preempt", "desc": "Cisco-proprietary first-hop redundancy." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "VRRP", "cmd": "interface Vlan10\n vrrp 10 ip 10.10.10.1\n vrrp 10 priority 110\n vrrp 10 preempt", "desc": "Standards-based FHRP." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "Show HSRP / VRRP", "cmd": "show standby brief\nshow vrrp brief", "desc": "State and active/standby roles." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Logging", "title": "Logging to syslog", "cmd": "logging host 10.0.0.50\nlogging trap informational\nservice timestamps log datetime msec localtime", "desc": "Remote syslog." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "SNMPv3 user", "cmd": "snmp-server group OPS v3 priv\nsnmp-server user monitor OPS v3 auth sha AUTHPASS priv aes 128 PRIVPASS", "desc": "SNMPv3 user with auth+priv." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NTP", "title": "NTP client + auth", "cmd": "ntp server 10.0.0.5 prefer\nntp authenticate\nntp authentication-key 1 md5 NTPKEY\nntp trusted-key 1", "desc": "Authenticated NTP." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "AAA + TACACS+", "cmd": "aaa new-model\ntacacs server TAC1\n address ipv4 10.0.0.20\n key 0 SECRET\naaa authentication login default group tacacs+ local\naaa authorization exec default group tacacs+ local", "desc": "Centralized auth." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Ping / extended ping", "cmd": "ping 10.10.10.1\nping 10.10.10.1 source Loopback0 size 1500 df-bit repeat 100", "desc": "Reachability + MTU/PMTU test." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Traceroute", "cmd": "traceroute 10.10.10.1\ntraceroute 10.10.10.1 source Loopback0 numeric", "desc": "Hop-by-hop path." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Debug template", "cmd": "terminal monitor\ndebug ip ospf adj\nundebug all", "desc": "Console-level debugging — use with caution." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Show logging", "cmd": "show logging\nshow logging | include LINK", "desc": "In-memory log buffer." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Show tech-support", "cmd": "show tech-support", "desc": "Comprehensive diagnostic dump." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Embedded packet capture", "cmd": "monitor capture CAP interface Gi0/0 both match ipv4 any any\nmonitor capture CAP start\nshow monitor capture CAP buffer brief\nmonitor capture CAP stop", "desc": "On-device packet capture (IOS-XE)." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "System", "title": "Save config", "cmd": "copy running-config startup-config", "desc": "Persist config." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "System", "title": "Feature enable", "cmd": "feature ospf\nfeature bgp\nfeature interface-vlan\nfeature lacp\nfeature vpc", "desc": "Enable NX-OS features (must precede config)." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Interfaces", "title": "L3 interface", "cmd": "interface Ethernet1/1\n no switchport\n ip address 10.0.0.1/30\n no shutdown", "desc": "Routed port." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vPC peer-link", "cmd": "vpc domain 1\n peer-keepalive destination 10.0.0.2\ninterface port-channel1\n vpc peer-link", "desc": "Virtual port-channel between two N9K/N7K." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "BGP (NX-OS)", "cmd": "router bgp 65001\n router-id 1.1.1.1\n neighbor 10.0.0.2 remote-as 65002\n address-family ipv4 unicast", "desc": "NX-OS BGP with explicit AF nesting." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "OSPF", "title": "OSPF (NX-OS)", "cmd": "router ospf 1\n router-id 1.1.1.1\ninterface Ethernet1/1\n ip router ospf 1 area 0", "desc": "NX-OS OSPF requires `feature ospf`." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Ethanalyzer (NX-OS sniffer)", "cmd": "ethanalyzer local interface inband display-filter \"bgp\" limit-captured-frames 0", "desc": "Built-in tcpdump-like CPU capture." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Save config", "cmd": "write memory", "desc": "Persist ASA config." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "Interface + nameif + security-level", "cmd": "interface GigabitEthernet0/0\n nameif outside\n security-level 0\n ip address 198.51.100.1 255.255.255.0\n no shutdown", "desc": "ASA interface requires nameif & security-level." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Access-list + access-group", "cmd": "access-list OUT_IN extended permit tcp any host 10.10.10.10 eq 443\naccess-group OUT_IN in interface outside", "desc": "Stateless ACL applied to interface." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "Static NAT (object)", "cmd": "object network WEB\n host 10.10.10.10\n nat (inside,outside) static 198.51.100.10", "desc": "Auto NAT 1:1." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "Dynamic PAT", "cmd": "object network INSIDE_NET\n subnet 10.10.10.0 255.255.255.0\n nat (inside,outside) dynamic interface", "desc": "Many-to-one PAT to outside interface." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Show xlate / connections", "cmd": "show xlate\nshow conn\nshow conn long", "desc": "NAT translations and stateful connections." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "Failover (active/standby)", "cmd": "failover\nfailover lan unit primary\nfailover lan interface FAILOVER GigabitEthernet0/3\nfailover key SECRET", "desc": "Stateful HA pair." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Packet-tracer", "cmd": "packet-tracer input outside tcp 1.1.1.1 1024 10.10.10.10 443", "desc": "Simulate packet through policy." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Capture", "cmd": "capture CAP interface outside match ip any host 10.10.10.10\nshow capture CAP\nno capture CAP", "desc": "On-box capture per interface." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "VPN site-to-site (IKEv2)", "cmd": "crypto ikev2 policy 10\n encryption aes-256\n integrity sha256\n group 14\n prf sha256\ntunnel-group 198.51.100.2 type ipsec-l2l\ntunnel-group 198.51.100.2 ipsec-attributes\n ikev2 remote-authentication pre-shared-key SECRET\n ikev2 local-authentication pre-shared-key SECRET", "desc": "IKEv2 L2L tunnel setup." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Show version", "cmd": "show version\nshow version detail", "desc": "Junos version and component versions." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Show chassis hardware", "cmd": "show chassis hardware\nshow chassis routing-engine", "desc": "FRU inventory & RE status." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Show config", "cmd": "show configuration\nshow configuration | display set", "desc": "Display config (hierarchical or set form)." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Edit/commit workflow", "cmd": "configure\nedit interfaces ge-0/0/0\nset description WAN\nshow | compare\ncommit check\ncommit confirmed 5\ncommit and-quit", "desc": "Junos candidate-config + commit confirmed (auto-rollback)." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Rollback", "cmd": "configure\nrollback 1\ncommit", "desc": "Revert to a previous committed configuration." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Set hostname / system", "cmd": "set system host-name R1\nset system time-zone UTC\nset system root-authentication plain-text-password", "desc": "Basic system identity." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Show system uptime", "cmd": "show system uptime\nshow system processes extensive | match cpu", "desc": "Uptime and process load." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Show system storage", "cmd": "show system storage", "desc": "Filesystem usage." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Request reboot", "cmd": "request system reboot\nrequest system reboot at 22:00", "desc": "Reboot now or scheduled." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Software upgrade", "cmd": "request system software add /var/tmp/jinstall.tgz no-validate reboot", "desc": "Install Junos package and reboot." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "Show interfaces terse", "cmd": "show interfaces terse\nshow interfaces ge-0/0/0 extensive", "desc": "Status quick view and detailed counters." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "Configure interface IPv4/IPv6", "cmd": "set interfaces ge-0/0/0 description WAN\nset interfaces ge-0/0/0 unit 0 family inet address 10.0.0.1/30\nset interfaces ge-0/0/0 unit 0 family inet6 address 2001:db8::1/64", "desc": "Logical unit 0 with inet/inet6 families." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "VLAN tagging / subinterface", "cmd": "set interfaces ge-0/0/0 vlan-tagging\nset interfaces ge-0/0/0 unit 10 vlan-id 10 family inet address 192.168.10.1/24", "desc": "802.1Q on a Junos router subinterface." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "Aggregated Ethernet (LACP)", "cmd": "set chassis aggregated-devices ethernet device-count 4\nset interfaces ge-0/0/0 gigether-options 802.3ad ae0\nset interfaces ge-0/0/1 gigether-options 802.3ad ae0\nset interfaces ae0 aggregated-ether-options lacp active", "desc": "AE bundle with LACP active." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "Loopback (lo0)", "cmd": "set interfaces lo0 unit 0 family inet address 1.1.1.1/32", "desc": "Router-id and protocol source." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "MTU", "cmd": "set interfaces ge-0/0/0 mtu 9192\nset interfaces ge-0/0/0 unit 0 family inet mtu 9000", "desc": "Physical and family MTU." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "Optics / DDM", "cmd": "show interfaces diagnostics optics ge-0/0/0", "desc": "Transceiver readings." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "Clear interface stats", "cmd": "clear interfaces statistics all\nclear interfaces statistics ge-0/0/0", "desc": "Reset counters." }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "VLAN — ELS (EX/QFX)", "cmd": "set vlans USERS vlan-id 100\nset interfaces ge-0/0/1 unit 0 family ethernet-switching interface-mode access vlan members USERS\nset interfaces ge-0/0/24 unit 0 family ethernet-switching interface-mode trunk vlan members [ USERS GUEST ]", "desc": "ELS-style VLAN + access/trunk." }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "Show VLANs / MAC", "cmd": "show vlans\nshow ethernet-switching table", "desc": "VLAN database & MAC table." }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "Spanning-tree (RSTP)", "cmd": "set protocols rstp\nshow spanning-tree bridge\nshow spanning-tree interface", "desc": "RSTP global + status." }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "Virtual Chassis (EX)", "cmd": "show virtual-chassis\nshow virtual-chassis status", "desc": "VC member roles and state." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "Static route", "cmd": "set routing-options static route 10.10.10.0/24 next-hop 10.0.0.2", "desc": "IPv4 static." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "Default route", "cmd": "set routing-options static route 0.0.0.0/0 next-hop 10.0.0.2", "desc": "Default." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "Show route", "cmd": "show route\nshow route 10.10.10.0/24 exact\nshow route protocol bgp", "desc": "FIB/RIB queries." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "Show route summary", "cmd": "show route summary", "desc": "Per-protocol prefix counts." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "OSPF basic", "cmd": "set routing-options router-id 1.1.1.1\nset protocols ospf area 0.0.0.0 interface ge-0/0/0.0\nset protocols ospf area 0.0.0.0 interface lo0.0 passive", "desc": "Single-area OSPF." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "OSPF neighbor / database", "cmd": "show ospf neighbor\nshow ospf database\nshow ospf interface", "desc": "State, LSDB, intf table." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "OSPFv3 (IPv6)", "cmd": "set protocols ospf3 area 0.0.0.0 interface ge-0/0/0.0", "desc": "OSPFv3 for IPv6." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "BGP eBGP peer", "cmd": "set routing-options autonomous-system 65001\nset protocols bgp group EXT type external\nset protocols bgp group EXT neighbor 10.0.0.2 peer-as 65002", "desc": "External BGP neighbor." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "BGP iBGP + loopback", "cmd": "set protocols bgp group INT type internal\nset protocols bgp group INT local-address 1.1.1.1\nset protocols bgp group INT neighbor 2.2.2.2", "desc": "iBGP sourced from lo0." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "Show BGP summary", "cmd": "show bgp summary", "desc": "Neighbors, uptime, prefixes." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "Show BGP neighbor / route", "cmd": "show bgp neighbor 10.0.0.2\nshow route advertising-protocol bgp 10.0.0.2\nshow route receive-protocol bgp 10.0.0.2", "desc": "Detailed state and per-peer adverts/received." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "Clear BGP (soft)", "cmd": "clear bgp neighbor 10.0.0.2 soft\nclear bgp neighbor all soft", "desc": "Refresh policy without dropping session." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "Policy: prefix-list + policy-statement", "cmd": "set policy-options prefix-list ALLOW 10.10.10.0/24\nset policy-options policy-statement EXPORT term 1 from prefix-list ALLOW\nset policy-options policy-statement EXPORT term 1 then accept\nset policy-options policy-statement EXPORT term 99 then reject\nset protocols bgp group EXT neighbor 10.0.0.2 export EXPORT", "desc": "Policy chain for outbound filtering." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "MPLS + LDP", "cmd": "set protocols mpls interface ge-0/0/0.0\nset protocols ldp interface ge-0/0/0.0\nset protocols ldp interface lo0.0", "desc": "Enable MPLS + LDP." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "L3VPN VRF (routing-instance)", "cmd": "set routing-instances CUST-A instance-type vrf\nset routing-instances CUST-A interface ge-0/0/1.0\nset routing-instances CUST-A route-distinguisher 65001:1\nset routing-instances CUST-A vrf-target target:65001:1", "desc": "Per-customer VRF." }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "Security zones", "cmd": "set security zones security-zone trust interfaces ge-0/0/1.0\nset security zones security-zone untrust interfaces ge-0/0/0.0\nset security zones security-zone trust host-inbound-traffic system-services [ ssh ping ]", "desc": "Map interfaces to zones." }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "Address book + application", "cmd": "set security zones security-zone trust address-book address WEB 10.10.10.10/32\nset applications application HTTPS protocol tcp destination-port 443", "desc": "Reusable objects." }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "Security policy", "cmd": "set security policies from-zone untrust to-zone trust policy ALLOW-WEB match source-address any\nset security policies from-zone untrust to-zone trust policy ALLOW-WEB match destination-address WEB\nset security policies from-zone untrust to-zone trust policy ALLOW-WEB match application HTTPS\nset security policies from-zone untrust to-zone trust policy ALLOW-WEB then permit", "desc": "Inter-zone permit policy." }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "Show security policies / sessions", "cmd": "show security policies\nshow security flow session\nshow security flow session destination-prefix 10.10.10.10", "desc": "Active sessions & policy hits." }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "Source NAT (PAT)", "cmd": "set security nat source rule-set TRUST-OUT from zone trust\nset security nat source rule-set TRUST-OUT to zone untrust\nset security nat source rule-set TRUST-OUT rule R1 match source-address 10.10.10.0/24\nset security nat source rule-set TRUST-OUT rule R1 then source-nat interface", "desc": "PAT to egress interface." }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "Destination NAT (port-forward)", "cmd": "set security nat destination pool WEB address 10.10.10.10/32 port 443\nset security nat destination rule-set DNAT from zone untrust\nset security nat destination rule-set DNAT rule WEB match destination-address 198.51.100.10/32\nset security nat destination rule-set DNAT rule WEB match destination-port 443\nset security nat destination rule-set DNAT rule WEB then destination-nat pool WEB", "desc": "Inbound port-forward." }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "IPSec VPN (IKEv2)", "cmd": "set security ike proposal P1 authentication-method pre-shared-keys\nset security ike proposal P1 dh-group group14\nset security ike proposal P1 authentication-algorithm sha-256\nset security ike proposal P1 encryption-algorithm aes-256-cbc\nset security ike policy POL proposals P1\nset security ike gateway GW1 ike-policy POL address 198.51.100.2 external-interface ge-0/0/0.0\nset security ipsec vpn VPN1 ike gateway GW1", "desc": "Phase 1 / Phase 2 skeleton." }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "HA", "title": "SRX chassis cluster", "cmd": "set chassis cluster cluster-id 1 node 0 reboot\nshow chassis cluster status\nshow chassis cluster interfaces", "desc": "Active/passive HA pair." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "Syslog", "cmd": "set system syslog host 10.0.0.50 any info\nset system syslog file messages any notice", "desc": "Remote and local syslog." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "SNMPv3", "cmd": "set snmp v3 usm local-engine user monitor authentication-sha authentication-password AUTHPASS privacy-aes128 privacy-password PRIVPASS\nset snmp v3 vacm security-to-group security-model usm security-name monitor group OPS", "desc": "SNMPv3 user + VACM mapping." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "NTP", "cmd": "set system ntp server 10.0.0.5 prefer\nset system time-zone UTC", "desc": "NTP client." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "TACACS+ / RADIUS", "cmd": "set system tacplus-server 10.0.0.20 secret SECRET\nset system authentication-order [ tacplus password ]", "desc": "AAA with local fallback." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "Ping / traceroute", "cmd": "ping 10.10.10.1 source 1.1.1.1 count 5 size 1500 do-not-fragment\ntraceroute 10.10.10.1 source 1.1.1.1", "desc": "Reachability/MTU tests." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "Monitor traffic (tcpdump)", "cmd": "monitor traffic interface ge-0/0/0 matching \"port 179\" no-resolve extensive", "desc": "Inline tcpdump on PFE-CPU traffic." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "Request support information", "cmd": "request support information | save /var/tmp/rsi.txt", "desc": "Tech-support dump for TAC." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "Show log messages", "cmd": "show log messages | last 100\nshow log messages | match \"ospf|bgp\"", "desc": "Tail and grep logs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Save config", "cmd": "copy running-config startup-config\n! short: write", "desc": "Persist config." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Show inventory / environment", "cmd": "show inventory\nshow environment all", "desc": "FRUs, fans, PSU, temp." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Configure session (atomic commit)", "cmd": "configure session UPGRADE\n interface Ethernet1\n description NEW\ncommit\n! or: abort", "desc": "EOS atomic config sessions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Reload / config replace", "cmd": "reload\n! safe upgrade:\nconfig replace flash:backup.conf", "desc": "Reboot or atomic replace." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Show interfaces status", "cmd": "show interfaces status\nshow interfaces description\nshow interfaces counters errors", "desc": "Status + error counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "L3 interface", "cmd": "interface Ethernet1\n no switchport\n ip address 10.0.0.1/30\n no shutdown", "desc": "Routed port (EOS uses CIDR)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Port-Channel (LACP)", "cmd": "interface Ethernet1-2\n channel-group 1 mode active\ninterface Port-Channel1\n switchport mode trunk", "desc": "LACP bundle, trunk." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Show transceiver", "cmd": "show interfaces transceiver\nshow interfaces transceiver detail", "desc": "DDM optics readings." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "MTU", "cmd": "interface Ethernet1\n mtu 9214", "desc": "Set jumbo MTU." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN config", "cmd": "vlan 100\n name USERS\ninterface Ethernet5\n switchport mode access\n switchport access vlan 100\ninterface Ethernet24\n switchport mode trunk\n switchport trunk allowed vlan 100,200", "desc": "Create + access/trunk." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "MLAG (Arista MC-LAG)", "cmd": "mlag configuration\n domain-id MLAG1\n local-interface Vlan4094\n peer-address 10.255.255.2\n peer-link Port-Channel999", "desc": "Dual-active multi-chassis link aggregation." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Show MAC / Spanning-tree", "cmd": "show mac address-table\nshow spanning-tree\nshow spanning-tree blockedports", "desc": "L2 status." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Show ip route", "cmd": "show ip route\nshow ip route bgp\nshow ipv6 route", "desc": "FIB by protocol." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Static", "title": "Static route", "cmd": "ip route 10.10.10.0/24 10.0.0.2\nip route 0.0.0.0/0 10.0.0.2", "desc": "IPv4 static + default." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "OSPF", "title": "OSPF (EOS)", "cmd": "router ospf 1\n router-id 1.1.1.1\n network 10.0.0.0/30 area 0\n passive-interface default\n no passive-interface Ethernet1", "desc": "Single-area OSPF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "OSPF", "title": "OSPF status", "cmd": "show ip ospf neighbor\nshow ip ospf database\nshow ip ospf interface", "desc": "Adjacency, LSDB, intf table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "BGP (EOS)", "cmd": "router bgp 65001\n router-id 1.1.1.1\n neighbor 10.0.0.2 remote-as 65002\n neighbor 10.0.0.2 send-community\n address-family ipv4\n neighbor 10.0.0.2 activate\n network 10.10.10.0/24", "desc": "eBGP peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "BGP show / clear", "cmd": "show ip bgp summary\nshow ip bgp\nshow ip bgp neighbors 10.0.0.2 advertised-routes\nclear ip bgp 10.0.0.2 soft", "desc": "State, table, soft-reset." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN-VXLAN (Type-2/Type-5)", "cmd": "service routing protocols model multi-agent\nrouter bgp 65001\n neighbor EVPN peer group\n neighbor EVPN remote-as 65000\n neighbor EVPN update-source Loopback0\n address-family evpn\n neighbor EVPN activate", "desc": "Arista BGP-EVPN underlay/overlay base." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "IP ACL", "cmd": "ip access-list WEB\n 10 permit tcp any host 10.10.10.10 eq 443\n 20 deny ip any any log\ninterface Ethernet1\n ip access-group WEB in", "desc": "Named L3/L4 ACL." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "MAC ACL", "cmd": "mac access-list MAC1\n 10 permit any host 0050.5601.0001 0xffff\ninterface Ethernet1\n mac access-group MAC1 in", "desc": "Layer-2 filter." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "VRRP", "cmd": "interface Vlan10\n ip address 10.10.10.2/24\n vrrp 10 ip 10.10.10.1\n vrrp 10 priority 110\n vrrp 10 preempt", "desc": "Standards FHRP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "VARP (anycast gateway)", "cmd": "ip virtual-router mac-address 00:00:00:00:00:01\ninterface Vlan10\n ip address 10.10.10.2/24\n ip virtual-router address 10.10.10.1", "desc": "Arista anycast GW for MLAG/EVPN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "Syslog", "cmd": "logging host 10.0.0.50\nlogging level all informational", "desc": "Remote syslog." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "NTP", "cmd": "ntp server 10.0.0.5 prefer iburst", "desc": "Single NTP server with iburst." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "AAA + TACACS+", "cmd": "tacacs-server host 10.0.0.20 key SECRET\naaa authentication login default group tacacs+ local\naaa authorization commands all default group tacacs+ local", "desc": "Centralized auth + command authz." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "Ping / traceroute", "cmd": "ping 10.10.10.1 source 1.1.1.1 size 1500 df-bit repeat 100\ntraceroute 10.10.10.1 source 1.1.1.1", "desc": "With DF-bit for MTU verify." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "Capture (EOS tcpdump)", "cmd": "bash sudo tcpdump -i ma1 -nn host 10.10.10.10\n! or: bash sudo tcpdump -i et1", "desc": "Drops to bash to use Linux tcpdump." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "Show logging", "cmd": "show logging\nshow logging last 30 minutes", "desc": "Live + time-windowed." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "EOS eAPI (JSON-RPC)", "cmd": "management api http-commands\n no shutdown\n protocol https", "desc": "Enable JSON-RPC API for automation." }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vlan 3", "cmd": "vlan 3", "desc": "Creates VLAN 3 and enters VLAN configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "name Engineering", "cmd": "name Engineering", "desc": "Assigns a name to the VLAN. The length of the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "exit", "cmd": "exit", "desc": "Assigning Ports to Data and Voice VLANs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface fastethernet 0/1", "cmd": "interface fastethernet 0/1", "desc": "Moves to interface configuration" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport mode access", "cmd": "switchport mode access", "desc": "Sets the port to access mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport access vlan 10", "cmd": "switchport access vlan 10", "desc": "Assigns this port to data VLAN 10" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport voice vlan 11", "cmd": "switchport voice vlan 11", "desc": "Using the range Command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range fastethernet 0/1 – 9", "cmd": "interface range fastethernet 0/1 – 9", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport mode", "cmd": "switchport mode", "desc": "VIRTUAL LANS" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport nonegotiate", "cmd": "switchport nonegotiate", "desc": "Use the switchport mode nonegotiate command only when" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport trunk pruning vlan except 40-50", "cmd": "switchport trunk pruning vlan except 40-50", "desc": "Use the switchport mode nonegotiate command only when" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport mode trunk", "cmd": "switchport mode trunk", "desc": "Verifying VTP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vtp status", "cmd": "show vtp status", "desc": "Displays general information about VTP" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vtp counters", "cmd": "show vtp counters", "desc": "Displays the VTP counters for the switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vtp password", "cmd": "show vtp password", "desc": "Verifying VLAN Information" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vlan id 2", "cmd": "show vlan id 2", "desc": "Displays information of VLAN 2 only" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vlan name marketing", "cmd": "show vlan name marketing", "desc": "Displays information of VLAN named marketing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show interfaces trunk", "cmd": "show interfaces trunk", "desc": "Displays the administrative and operational" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Interfaces", "title": "show interfaces switchport", "cmd": "show interfaces switchport", "desc": "Displays the administrative and operational" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show interface fastethernet 0/1 trunk", "cmd": "show interface fastethernet 0/1 trunk", "desc": "The stored configurations of VLANs 1 through 1005 are always" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "delete flash:vlan.d at", "cmd": "delete flash:vlan.d at", "desc": "VIRTUAL LANS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "delete flash:vlan.dat Delete filename [vlan.dat]? Delete flash:vlan.da", "cmd": "delete flash:vlan.dat Delete filename [vlan.dat]? Delete flash:vlan.dat? [confirm]", "desc": "Configuration Example: VLANs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "enable", "cmd": "enable", "desc": "Moves to global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "hostname Switch3650", "cmd": "hostname Switch3650", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "hostname Switch2960", "cmd": "hostname Switch2960", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "hostname DLSwitch", "cmd": "hostname DLSwitch", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range gigabitethernet 1/0/3-4", "cmd": "interface range gigabitethernet 1/0/3-4", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "hostname ALSwitch1", "cmd": "hostname ALSwitch1", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range fastethernet 0/9 – 12", "cmd": "interface range fastethernet 0/9 – 12", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range gigabitethernet 0/1 – 2", "cmd": "interface range gigabitethernet 0/1 – 2", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "hostname ALSwitch2", "cmd": "hostname ALSwitch2", "desc": "Sets the host name" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vtp mode server", "cmd": "vtp mode server", "desc": "Changes the switch to VTP server mode. Note" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vtp mode client", "cmd": "vtp mode client", "desc": "Changes the switch to VTP server mode. Note" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "no ip domain-lookup", "cmd": "no ip domain-lookup", "desc": "Changes the switch to VTP server mode. Note" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vtp domain ENCOR", "cmd": "vtp domain ENCOR", "desc": "Configures the VTP domain name to ENCOR" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vtp password Order66", "cmd": "vtp password Order66", "desc": "Sets the VTP password to Order66" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vlan 10", "cmd": "vlan 10", "desc": "Creates VLAN 10 and enters VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range fastethernet 0/1 - 8", "cmd": "interface range fastethernet 0/1 - 8", "desc": "Creates VLAN 10 and enters VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "name Admin", "cmd": "name Admin", "desc": "Increases the revision number by 1 and" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vlan 20", "cmd": "vlan 20", "desc": "Creates VLAN 20 and enters VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "name Accounting", "cmd": "name Accounting", "desc": "Assigns a name to the VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "name Marketing", "cmd": "name Marketing", "desc": "Assigns a name to the VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vlan 30", "cmd": "vlan 30", "desc": "Exiting VLAN configuration mode adds" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range gigabitethernet 1/0/1-8", "cmd": "interface range gigabitethernet 1/0/1-8", "desc": "Enables you to set the same configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range gigabitethernet 1/0/9-15", "cmd": "interface range gigabitethernet 1/0/9-15", "desc": "Returns to global configuration mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport access vlan 20", "cmd": "switchport access vlan 20", "desc": "Returns to global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range gigabitethernet 1/0/16-24", "cmd": "interface range gigabitethernet 1/0/16-24", "desc": "Returns to global configuration mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport access vlan 30", "cmd": "switchport access vlan 30", "desc": "Returns to global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface", "cmd": "interface", "desc": "Using this interface will require the" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vtp version 3", "cmd": "vtp version 3", "desc": "Using this interface will require the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface gigabitethernet 0/1", "cmd": "interface gigabitethernet 0/1", "desc": "Using this interface will require the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range gigabitethernet 1/0/1-4", "cmd": "interface range gigabitethernet 1/0/1-4", "desc": "Using this interface will require the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range gigabitethernet 1/0/1-2", "cmd": "interface range gigabitethernet 1/0/1-2", "desc": "Using this interface will require the" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport", "cmd": "switchport", "desc": "Enables VTP Version 3" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vtp pruning", "cmd": "vtp pruning", "desc": "Enables VTP pruning on this switch" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "end", "cmd": "end", "desc": "Returns to privileged EXEC mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vtp primary vlan force", "cmd": "vtp primary vlan force", "desc": "Configures the 3650 to be the VTP primary" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "copy runningconfig startup-config", "cmd": "copy runningconfig startup-config", "desc": "Configures the 3650 to be the VTP primary" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range fastethernet 0/9 - 15", "cmd": "interface range fastethernet 0/9 - 15", "desc": "Monitoring and Verifying EtherChannel" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range fastethernet 0/16 - 24", "cmd": "interface range fastethernet 0/16 - 24", "desc": "Monitoring and Verifying EtherChannel" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "show running-config interface fastethernet 0/12", "cmd": "show running-config interface fastethernet 0/12", "desc": "Displays interface fastethernet" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "EtherChannel", "title": "show interfaces fastethernet 0/12 etherchannel", "cmd": "show interfaces fastethernet 0/12 etherchannel", "desc": "Displays EtherChannel" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "EtherChannel", "title": "show etherchannel", "cmd": "show etherchannel", "desc": "Displays all EtherChannel" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "EtherChannel", "title": "show etherchannel 1 port-channel", "cmd": "show etherchannel 1 port-channel", "desc": "Displays port channel" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "EtherChannel", "title": "show etherchannel summary", "cmd": "show etherchannel summary", "desc": "EtherChannel information" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "show interface portchannel 1", "cmd": "show interface portchannel 1", "desc": "EtherChannel 1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show lacp neighbor", "cmd": "show lacp neighbor", "desc": "Shows LACP neighbor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show pagp neighbor", "cmd": "show pagp neighbor", "desc": "Shows PAgP neighbor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "clear pagp 1 counters", "cmd": "clear pagp 1 counters", "desc": "Clears PAgP channel group 1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "clear lacp 1 counters", "cmd": "clear lacp 1 counters", "desc": "Changes the switch to VTP server mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "channel-group 1 mode desirable", "cmd": "channel-group 1 mode desirable", "desc": "Changes the switch to VTP client mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "channel-group 2 mode desirable", "cmd": "channel-group 2 mode desirable", "desc": "Changes the switch to VTP client mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vtp domain testdomain", "cmd": "vtp domain testdomain", "desc": "Configures the VTP domain name to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range fastethernet 0/5 – 8", "cmd": "interface range fastethernet 0/5 – 8", "desc": "Moves to privileged EXEC mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "copy running-config startupconfig", "cmd": "copy running-config startupconfig", "desc": "Sets host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "copy", "cmd": "copy", "desc": "Sets host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "no ip domainlookup", "cmd": "no ip domainlookup", "desc": "VIRTUAL LANS" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree vlan 5", "cmd": "spanning-tree vlan 5", "desc": "Enables STP on VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "no spanning-tree vlan 5", "cmd": "no spanning-tree vlan 5", "desc": "You can configure different types of spanning trees on a Cisco" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "spanning-tree mode pvst", "cmd": "spanning-tree mode pvst", "desc": "Enters MST mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "spanning-tree mode mst", "cmd": "spanning-tree mode mst", "desc": "Enters MST mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "spanning-tree mst configuration", "cmd": "spanning-tree mst configuration", "desc": "MST configuration" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "spanning-tree mode rapid-pvst", "cmd": "spanning-tree mode rapid-pvst", "desc": "ENABLING SPANNING TREE PROTOCOL" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "clear spanning-tree detectedprotocols", "cmd": "clear spanning-tree detectedprotocols", "desc": "ENABLING SPANNING TREE PROTOCOL" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree vlan 5 root primary", "cmd": "spanning-tree vlan 5 root primary", "desc": "The root switch should be a backbone or distribution switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "spanning-tree portfast default", "cmd": "spanning-tree portfast default", "desc": "The root switch should be a backbone or distribution switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "spanning-tree bpduguard disable", "cmd": "spanning-tree bpduguard disable", "desc": "The root switch should be a backbone or distribution switch" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "interface gigabitethernet 1/0/2", "cmd": "interface gigabitethernet 1/0/2", "desc": "The root switch should be a backbone or distribution switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanning-tree summary", "cmd": "show spanning-tree summary", "desc": "The root switch should be a backbone or distribution switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanning-tree active", "cmd": "show spanning-tree active", "desc": "The root switch should be a backbone or distribution switch" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "errdisable detect cause inline-power", "cmd": "errdisable detect cause inline-power", "desc": "The root switch should be a backbone or distribution switch" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show errdisable detect |", "cmd": "show errdisable detect |", "desc": "The root switch should be a backbone or distribution switch" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "name region12", "cmd": "name region12", "desc": "The root switch should be a backbone or distribution switch" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show current", "cmd": "show current", "desc": "The root switch should be a backbone or distribution switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "spanning-tree mst 2 cost 250", "cmd": "spanning-tree mst 2 cost 250", "desc": "The root switch should be a backbone or distribution switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree vlan 5 root primary diameter 6", "cmd": "spanning-tree vlan 5 root primary diameter 6", "desc": "ENABLING SPANNING TREE PROTOCOL" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree vlan 5 root secondary", "cmd": "spanning-tree vlan 5 root secondary", "desc": "This switch lowers its priority to 28672. If the root" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree vlan 5 root secondary diameter 7", "cmd": "spanning-tree vlan 5 root secondary diameter 7", "desc": "CONFIGURING A SECONDARY ROOT SWITCH" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree", "cmd": "spanning-tree", "desc": "Although the following commands are not mandatory for STP to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "interface gigabitethernet 1/0/10", "cmd": "interface gigabitethernet 1/0/10", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree portfast", "cmd": "spanning-tree portfast", "desc": "Enables PortFast if the port is already" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree guard loop", "cmd": "spanning-tree guard loop", "desc": "Enables PortFast if the port is already" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "udld port [aggressive]", "cmd": "udld port [aggressive]", "desc": "Enables PortFast if the port is already" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree portfast disable", "cmd": "spanning-tree portfast disable", "desc": "Disables PortFast for the interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree portfast edge", "cmd": "spanning-tree portfast edge", "desc": "Enables the PortFast edge feature for the" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree portfast network", "cmd": "spanning-tree portfast network", "desc": "Bridge Assurance is enabled globally by default" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree portfast trunk", "cmd": "spanning-tree portfast trunk", "desc": "You can override the spanning-tree portfast default" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show spanning-tree interface gigabitethernet 1/0/10 portfast", "cmd": "show spanning-tree interface gigabitethernet 1/0/10 portfast", "desc": "BPDU Guard (2xxx/older 3xxx Series)" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree portfast bpduguard default", "cmd": "spanning-tree portfast bpduguard default", "desc": "Globally enables BPDU Guard on ports" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "interface range fastethernet 0/1 - 5", "cmd": "interface range fastethernet 0/1 - 5", "desc": "BPDU Guard" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree bpduguard enable", "cmd": "spanning-tree bpduguard enable", "desc": "Disables BPDU Guard on the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause bpduguard", "cmd": "errdisable recovery cause bpduguard", "desc": "Allows port to reenable itself if the cause" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery interval 400", "cmd": "errdisable recovery interval 400", "desc": "Sets recovery timer to 400 seconds. The" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show spanningtree summary totals", "cmd": "show spanningtree summary totals", "desc": "Verifies whether BPDU Guard is enabled" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show errdisable recovery", "cmd": "show errdisable recovery", "desc": "EXEC mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree bpdufilter enable", "cmd": "spanning-tree bpdufilter enable", "desc": "Displays global BPDU filtering" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show spanning-", "cmd": "show spanning-", "desc": "CONFIGURING THE SWITCH PRIORITY OF A VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree uplinkfast", "cmd": "spanning-tree uplinkfast", "desc": "Enables UplinkFast. UplinkFast provides fast" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree uplinkfast max-", "cmd": "spanning-tree uplinkfast max-", "desc": "Verifies whether UplinkFast has been enabled" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show spanning-tree uplinkfast", "cmd": "show spanning-tree uplinkfast", "desc": "Enables BackboneFast. BackboneFast is initiated when" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show spanningtree summary", "cmd": "show spanningtree summary", "desc": "Verifies BackboneFast has been enabled" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show spanningtree backbonefast", "cmd": "show spanningtree backbonefast", "desc": "Root Guard" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show spanning-tree inconsistentpo rts", "cmd": "show spanning-tree inconsistentpo rts", "desc": "Indicates whether any ports are in a rootinconsistent state" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show spanning-tree root", "cmd": "show spanning-tree root", "desc": "The show spanning-tree root command output includes root ID for all" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show spanning-tree", "cmd": "show spanning-tree", "desc": "Shows which ports are alternate or root ports" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show spanning-tree mst", "cmd": "show spanning-tree mst", "desc": "Moves to global configuration mode" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree loopguard default", "cmd": "spanning-tree loopguard default", "desc": "Enables Loop Guard globally on the switch for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "hostname Core", "cmd": "hostname Core", "desc": "Enables Loop Guard globally on the switch for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "interface gigabitethernet 1/0/1", "cmd": "interface gigabitethernet 1/0/1", "desc": "Enables Loop Guard on all the VLANs" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show spanning-tree interface detail", "cmd": "show spanning-tree interface detail", "desc": "Displays UDLD information" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show udld interface", "cmd": "show udld interface", "desc": "Ethernet 1/0/1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "udld reset", "cmd": "udld reset", "desc": "The errdisable recovery command enables the network device" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable detect cause all", "cmd": "errdisable detect cause all", "desc": "Enables error detection for all errordisabled causes" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable detect cause bpduguard shutdown vlan", "cmd": "errdisable detect cause bpduguard shutdown vlan", "desc": "CONFIGURING THE SWITCH PRIORITY OF A VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable detect cause dhcp-ratelimit", "cmd": "errdisable detect cause dhcp-ratelimit", "desc": "Enables error detection for DHCP snooping" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable detect cause dtp-flap", "cmd": "errdisable detect cause dtp-flap", "desc": "Protocol (DTP) flapping" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable detect cause gbic-invalid", "cmd": "errdisable detect cause gbic-invalid", "desc": "Enables error detection for inline power" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable detect cause link-flap", "cmd": "errdisable detect cause link-flap", "desc": "Enables error detection for link-state" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable detect cause loopback", "cmd": "errdisable detect cause loopback", "desc": "Enables error detection for detected" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable detect cause pagp-flap", "cmd": "errdisable detect cause pagp-flap", "desc": "Aggregation Protocol (PAgP) flap errordisabled cause" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable detect cause securityviolation shutdown vlan", "cmd": "errdisable detect cause securityviolation shutdown vlan", "desc": "Enables voice-aware 802.1X security" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable detect cause sfp-configmismatch", "cmd": "errdisable detect cause sfp-configmismatch", "desc": "The same interval is applied to all causes. The range is 30" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause parameter", "cmd": "errdisable recovery cause parameter", "desc": "Enables the error-disabled mechanism to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause all", "cmd": "errdisable recovery cause all", "desc": "Guard error-disabled state" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause channelmisconfig", "cmd": "errdisable recovery cause channelmisconfig", "desc": "EtherChannel misconfiguration errordisabled state" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause dhcp-ratelimit", "cmd": "errdisable recovery cause dhcp-ratelimit", "desc": "Enables the timer to recover from the DTP-" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause gbic-invalid", "cmd": "errdisable recovery cause gbic-invalid", "desc": "This error refers to an invalid SFP error-disabled state" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause inline-power", "cmd": "errdisable recovery cause inline-power", "desc": "Enables the timer to recover for inline" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause link-flap", "cmd": "errdisable recovery cause link-flap", "desc": "Enables the timer to recover from the linkflap error-disabled state" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause loopback", "cmd": "errdisable recovery cause loopback", "desc": "Enables the timer to recover from a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause pagp-flap", "cmd": "errdisable recovery cause pagp-flap", "desc": "PAgP-flap error-disabled state" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause psecureviolation", "cmd": "errdisable recovery cause psecureviolation", "desc": "Enables the timer to recover from a port" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause securityviolation", "cmd": "errdisable recovery cause securityviolation", "desc": "Enables the timer to recover from an IEEE" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "errdisable recovery cause sfp-mismatch", "cmd": "errdisable recovery cause sfp-mismatch", "desc": "Enables the timer to recover from an SFP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show errdisable detect", "cmd": "show errdisable detect", "desc": "CONFIGURING THE SWITCH PRIORITY OF A VLAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "clear spanning-tree detected-protocols", "cmd": "clear spanning-tree detected-protocols", "desc": "Restarts the protocol migration process. With" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "clear spanning-tree detected-protocols interface gigabitethernet 1/0/1", "cmd": "clear spanning-tree detected-protocols interface gigabitethernet 1/0/1", "desc": "Restarts the protocol migration process on" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "EtherChannel", "title": "clear spanning-tree detected-protocols port-channel 1", "cmd": "clear spanning-tree detected-protocols port-channel 1", "desc": "Displays the summary of what is currently" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanning-tree detail", "cmd": "show spanning-tree detail", "desc": "Displays the summary of what is currently" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show pending", "cmd": "show pending", "desc": "Applies all changes and returns to global" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "spanning-tree mst 1 priority 4096", "cmd": "spanning-tree mst 1 priority 4096", "desc": "You cannot run both MSTP and PVST at the same time" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "spanning-tree mst 1", "cmd": "spanning-tree mst 1", "desc": "Configures a switch as a primary root switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "spanning-tree mst 1 root secondary", "cmd": "spanning-tree mst 1 root secondary", "desc": "Configures a switch as a secondary root" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "spanning-tree mst 20 port-priority 0", "cmd": "spanning-tree mst 20 port-priority 0", "desc": "ENABLING RAPID SPANNING TREE" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanningtree", "cmd": "show spanningtree", "desc": "Displays STP information" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanningtree active", "cmd": "show spanningtree active", "desc": "Displays STP information on active" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanningtree bridge", "cmd": "show spanningtree bridge", "desc": "Displays status and configuration of this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanningtree detail", "cmd": "show spanningtree detail", "desc": "Displays a detailed summary of interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanningtree interface gigabitethernet 1/0/1", "cmd": "show spanningtree interface gigabitethernet 1/0/1", "desc": "Displays the total lines of the STP section" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show spanningtree vlan 5", "cmd": "show spanningtree vlan 5", "desc": "Displays STP information for VLAN 5" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanningtree mst configuration", "cmd": "show spanningtree mst configuration", "desc": "Displays the MST region configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanningtree mst configuration digest", "cmd": "show spanningtree mst configuration digest", "desc": "Displays the message digest 5 (MD5)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanningtree mst 1", "cmd": "show spanningtree mst 1", "desc": "Displays the MST information for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanningtree mst interface gigabitethernet 1/0/1", "cmd": "show spanningtree mst interface gigabitethernet 1/0/1", "desc": "VERIFYING STP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanningtree mst 1 interface gigabitethernet 1/0/1", "cmd": "show spanningtree mst 1 interface gigabitethernet 1/0/1", "desc": "VERIFYING STP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "show spanningtree mst 1 detail", "cmd": "show spanningtree mst 1 detail", "desc": "VERIFYING STP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "debug spanningtree all", "cmd": "debug spanningtree all", "desc": "Displays all spanning-tree" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "debug spanningtree events", "cmd": "debug spanningtree events", "desc": "Displays spanning-tree debugging" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "debug spanningtree backbonefast", "cmd": "debug spanningtree backbonefast", "desc": "BackboneFast events" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "debug spanningtree uplinkfast", "cmd": "debug spanningtree uplinkfast", "desc": "UplinkFast events" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "debug spanningtree mstp all", "cmd": "debug spanningtree mstp all", "desc": "Displays all MST debugging events" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "debug spanningtree switch state", "cmd": "debug spanningtree switch state", "desc": "Displays spanning-tree port state" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "debug spanningtree pvst+", "cmd": "debug spanningtree pvst+", "desc": "Core Switch (3650)" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vtp domain STPDEMO", "cmd": "vtp domain STPDEMO", "desc": "TROUBLESHOOTING SPANNING TREE PROTOCOL" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree vlan 1 root primary", "cmd": "spanning-tree vlan 1 root primary", "desc": "Creates VLAN 20 and enters VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "hostname Distribution1", "cmd": "hostname Distribution1", "desc": "Configures the VTP domain name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "hostname Distribution2", "cmd": "hostname Distribution2", "desc": "Configures the VTP domain name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "hostname Access1", "cmd": "hostname Access1", "desc": "Configures the VTP domain name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "hostname", "cmd": "hostname", "desc": "Configures the VTP domain name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "no spanningtree uplinkfast", "cmd": "no spanningtree uplinkfast", "desc": "Configures the VTP domain name" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree vlan 10 root primary", "cmd": "spanning-tree vlan 10 root primary", "desc": "Configures the switch to become" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree vlan 20 root", "cmd": "spanning-tree vlan 20 root", "desc": "Configures the switch to become" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range fastethernet 0/6 - 12", "cmd": "interface range fastethernet 0/6 - 12", "desc": "Configures the switch to become" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "spanning-tree vlan 10 root secondary", "cmd": "spanning-tree vlan 10 root secondary", "desc": "Moves to interface range" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Spanning-Tree", "title": "no spanningtree backbonefast", "cmd": "no spanningtree backbonefast", "desc": "STPDEMO" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface fastethernet 0/0", "cmd": "interface fastethernet 0/0", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "description link to ISP", "cmd": "description link to ISP", "desc": "Enables the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "description link to L3Switch1", "cmd": "description link to L3Switch1", "desc": "Enables the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "description Trunk Link to CORP Router", "cmd": "description Trunk Link to CORP Router", "desc": "Enables the interface" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport trunk encapsulation dot1q", "cmd": "switchport trunk encapsulation dot1q", "desc": "Enables the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:0:0:4::2/64", "cmd": "ipv6 address 2001:0:0:4::2/64", "desc": "Enables the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface fastethernet 0/0.1", "cmd": "interface fastethernet 0/0.1", "desc": "Creates subinterface 0/0.1 and moves to" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface vlan 10", "cmd": "interface vlan 10", "desc": "Creates subinterface 0/0.1 and moves to" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface vlan 20", "cmd": "interface vlan 20", "desc": "Creates subinterface 0/0.1 and moves to" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "description Management VLAN 1", "cmd": "description Management VLAN 1", "desc": "Best practices dictate that VLAN 1 should not be used for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "encapsulation dot1q 1 native", "cmd": "encapsulation dot1q 1 native", "desc": "Assigns VLAN 1 to this subinterface. VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 192.168.1.1 255.255.255.0", "cmd": "ip address 192.168.1.1 255.255.255.0", "desc": "Assigns the IP address and netmask" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface fastethernet 0/0.10", "cmd": "interface fastethernet 0/0.10", "desc": "Creates subinterface 0/0.10 and moves to" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "description Accounting VLAN 10", "cmd": "description Accounting VLAN 10", "desc": "Assigns VLAN 10 to this subinterface. This" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "encapsulation dot1q 10", "cmd": "encapsulation dot1q 10", "desc": "Assigns VLAN 10 to this subinterface. This" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 192.168.10.1 255.255.255.0", "cmd": "ip address 192.168.10.1 255.255.255.0", "desc": "Configuring Inter-VLAN Communication on an L3 Switch" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface vlan 1", "cmd": "interface vlan 1", "desc": "Creates a virtual interface for VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 172.16.1.1 255.255.255.0", "cmd": "ip address 172.16.1.1 255.255.255.0", "desc": "Returns to global configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 172.16.10.1 255.255.255.0", "cmd": "ip address 172.16.10.1 255.255.255.0", "desc": "Returns to global configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 172.16.20.1 255.255.255.0", "cmd": "ip address 172.16.20.1 255.255.255.0", "desc": "Returns to global configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip routing", "cmd": "ip routing", "desc": "Removing L2 Switchport Capability of an Interface on an L3 Switch" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "router eigrp 10", "cmd": "router eigrp 10", "desc": "Removing L2 Switchport Capability of an Interface on an L3 Switch" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface gigabitethernet", "cmd": "interface gigabitethernet", "desc": "Moves to interface configuration" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "Routing", "title": "no switchport", "cmd": "no switchport", "desc": "ISP Router" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "hostname ISP", "cmd": "hostname ISP", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "description simulated address representing remote website", "cmd": "description simulated address representing remote website", "desc": "Sets the locally significant" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "description WAN link to the Corporate Router", "cmd": "description WAN link to the Corporate Router", "desc": "Sets the locally significant" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 198.133.219.1 255.255.255.0", "cmd": "ip address 198.133.219.1 255.255.255.0", "desc": "Assigns an IP address and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 192.31.7.5 255.255.255.252", "cmd": "ip address 192.31.7.5 255.255.255.252", "desc": "Assigns an IP address and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface serial 0/0/0", "cmd": "interface serial 0/0/0", "desc": "Gateway Routing Protocol" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "network 198.133.219.0 0.0.0.255", "cmd": "network 198.133.219.0 0.0.0.255", "desc": "Advertises directly connected" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "network 192.31.7.0 0.0.0.255", "cmd": "network 192.31.7.0 0.0.0.255", "desc": "Returns to privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "hostname CORP", "cmd": "hostname CORP", "desc": "Sets the locally significant interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "hostname L2Switch2", "cmd": "hostname L2Switch2", "desc": "Sets the locally significant interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "hostname L3Switch1", "cmd": "hostname L3Switch1", "desc": "Sets the locally significant interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "hostname L2Switch1", "cmd": "hostname L2Switch1", "desc": "Sets the locally significant interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 192.31.7.6 255.255.255.252", "cmd": "ip address 192.31.7.6 255.255.255.252", "desc": "Creates a virtual subinterface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 172.31.1.5 255.255.255.252", "cmd": "ip address 172.31.1.5 255.255.255.252", "desc": "Creates a virtual subinterface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "encapsulation dot1q 20", "cmd": "encapsulation dot1q 20", "desc": "Creates a virtual subinterface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "encapsulation dot1q 30", "cmd": "encapsulation dot1q 30", "desc": "Creates a virtual subinterface and" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "description Management VLAN 1 - Native VLAN", "cmd": "description Management VLAN 1 - Native VLAN", "desc": "This subinterface uses the 802.1q" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "description Sales VLAN 10", "cmd": "description Sales VLAN 10", "desc": "This subinterface uses the 802.1q" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "description Engineering VLAN 20", "cmd": "description Engineering VLAN 20", "desc": "This subinterface uses the 802.1q" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "description Marketing VLAN 30", "cmd": "description Marketing VLAN 30", "desc": "This subinterface uses the 802.1q" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 192.168.10.1", "cmd": "ip address 192.168.10.1", "desc": "Assigns an IP address and netmask" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 192.168.20.1 255.255.255.0", "cmd": "ip address 192.168.20.1 255.255.255.0", "desc": "Assigns an IP address and netmask" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface fastethernet 0/0.20", "cmd": "interface fastethernet 0/0.20", "desc": "Creates EIGRP routing process 10 and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface fastethernet 0/0.30", "cmd": "interface fastethernet 0/0.30", "desc": "Creates EIGRP routing process 10 and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "network 192.168.1.0 0.0.0.255", "cmd": "network 192.168.1.0 0.0.0.255", "desc": "Advertises the 192.168.1.0 network" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "network 172.16.0.0 0.0.255.255", "cmd": "network 172.16.0.0 0.0.255.255", "desc": "Advertises the 192.168.1.0 network" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "network 192.168.10.0 0.0.0.255", "cmd": "network 192.168.10.0 0.0.0.255", "desc": "Advertises the 192.168.10.0 network" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "network 192.168.20.0 0.0.0.255", "cmd": "network 192.168.20.0 0.0.0.255", "desc": "Advertises the 192.168.20.0 network" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "network 192.168.30.0 0.0.0.255", "cmd": "network 192.168.30.0 0.0.0.255", "desc": "Advertises the 192.168.30.0 network" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "network 172.31.0.0 0.0.255.255", "cmd": "network 172.31.0.0 0.0.255.255", "desc": "Advertises the 172.31.0.0 network" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "network 192.31.7.0", "cmd": "network 192.31.7.0", "desc": "Returns to privileged EXEC mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "name Sales", "cmd": "name Sales", "desc": "Returns to global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface range fastethernet 0/2 4", "cmd": "interface range fastethernet 0/2 4", "desc": "Creates VLAN 20 and enters VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip default-gateway 192.168.1.1", "cmd": "ip default-gateway 192.168.1.1", "desc": "Creates VLAN 20 and enters VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface gigabitethernet 1/0/24", "cmd": "interface gigabitethernet 1/0/24", "desc": "Creates VLAN 20 and enters VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip default-gateway 172.16.1.1", "cmd": "ip default-gateway 172.16.1.1", "desc": "Creates VLAN 20 and enters VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 route ::/0 2001:db8:0:1::1", "cmd": "ipv6 route ::/0 2001:db8:0:1::1", "desc": "Creates VLAN 20 and enters VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface range fastethernet 0/5 8", "cmd": "interface range fastethernet 0/5 8", "desc": "Creates a virtual interface for VLAN 1 and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface range fastethernet 0/9 12", "cmd": "interface range fastethernet 0/9 12", "desc": "Creates a virtual interface for VLAN 1 and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface range fastethernet 0/5 - 8", "cmd": "interface range fastethernet 0/5 - 8", "desc": "Creates a virtual interface for VLAN 1 and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 192.168.1.2 255.255.255.0", "cmd": "ip address 192.168.1.2 255.255.255.0", "desc": "Turns off DNS queries so that spelling" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 172.16.1.2 255.255.255.0", "cmd": "ip address 172.16.1.2 255.255.255.0", "desc": "Turns off DNS queries so that spelling" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip address 172.31.1.6 255.255.255.252", "cmd": "ip address 172.31.1.6 255.255.255.252", "desc": "Configures the VTP domain name to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface range fastethernet 0/1 - 4", "cmd": "interface range fastethernet 0/1 - 4", "desc": "Sets the hostname" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface loopback 0", "cmd": "interface loopback 0", "desc": "Enters interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:a::1/64", "cmd": "ipv6 address 2001:db8:0:a::1/64", "desc": "DCE cable is plugged into this interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:8::1/64", "cmd": "ipv6 address 2001:db8:0:8::1/64", "desc": "Exits into global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 route ::/0 serial 0/0/0", "cmd": "ipv6 route ::/0 serial 0/0/0", "desc": "Enables global IPv6 forwarding" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 router ospf 1", "cmd": "ipv6 router ospf 1", "desc": "Exits to global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface gigabitethernet 0/0.1", "cmd": "interface gigabitethernet 0/0.1", "desc": "Assigns 802.1Q as the trunking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 route ::/0 2001:db8:0:2::1", "cmd": "ipv6 route ::/0 2001:db8:0:2::1", "desc": "Assigns 802.1Q as the trunking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:2::1/64", "cmd": "ipv6 address 2001:db8:0:2::1/64", "desc": "Assigns an IPv6 address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:30::1/64", "cmd": "ipv6 address 2001:db8:0:30::1/64", "desc": "Assigns an IPv6 address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:40::1/64", "cmd": "ipv6 address 2001:db8:0:40::1/64", "desc": "Assigns an IPv6 address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:50::1/64", "cmd": "ipv6 address 2001:db8:0:50::1/64", "desc": "Assigns an IPv6 address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 ospf 1 area 0", "cmd": "ipv6 ospf 1 area 0", "desc": "Specifies this as an interface that will" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface gigabitethernet 0/0.30", "cmd": "interface gigabitethernet 0/0.30", "desc": "Enters subinterface programming" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface gigabitethernet 0/0.40", "cmd": "interface gigabitethernet 0/0.40", "desc": "Enters subinterface programming" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface gigabitethernet 0/0.50", "cmd": "interface gigabitethernet 0/0.50", "desc": "Enters subinterface programming" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface gigabitethernet 0/0", "cmd": "interface gigabitethernet 0/0", "desc": "Enters subinterface programming" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "encapsulation dot1q 40", "cmd": "encapsulation dot1q 40", "desc": "Enters interface programming mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "encapsulation dot1q 50", "cmd": "encapsulation dot1q 50", "desc": "Enters interface programming mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:7::2/64", "cmd": "ipv6 address 2001:db8:0:7::2/64", "desc": "Exits to global configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:8::2/64", "cmd": "ipv6 address 2001:db8:0:8::2/64", "desc": "Exits to global configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 route", "cmd": "ipv6 route", "desc": "ROUTER: ROUTER-ON-A-STICK" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vlan 30,40,50", "cmd": "vlan 30,40,50", "desc": "Exits VLAN configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface fastethernet 0/5", "cmd": "interface fastethernet 0/5", "desc": "Sets this port to trunk unconditionally" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface range fastethernet 0/12 14", "cmd": "interface range fastethernet 0/12 14", "desc": "Sets these ports to be access ports" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport access vlan 50", "cmd": "switchport access vlan 50", "desc": "Assigns these ports to VLAN 30" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface range fastethernet 0/15 18", "cmd": "interface range fastethernet 0/15 18", "desc": "Assigns these ports to VLAN 20" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface range fastethernet 0/19 22", "cmd": "interface range fastethernet 0/19 22", "desc": "Assigns these ports to VLAN 50" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "interface vlan1", "cmd": "interface vlan1", "desc": "Enters interface configuration mode for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:2::/64", "cmd": "ipv6 address 2001:db8:0:2::/64", "desc": "Enables IPv6 forwarding" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vlan 10,20", "cmd": "vlan 10,20", "desc": "Changes this Layer 2 switch" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:7::1/64", "cmd": "ipv6 address 2001:db8:0:7::1/64", "desc": "Enters interface configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:1::1/64", "cmd": "ipv6 address 2001:db8:0:1::1/64", "desc": "Specifies this as an interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:10::1/64", "cmd": "ipv6 address 2001:db8:0:10::1/64", "desc": "Specifies this as an interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ipv6 address 2001:db8:0:20::1/64", "cmd": "ipv6 address 2001:db8:0:20::1/64", "desc": "Specifies this as an interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "interface vlan10", "cmd": "interface vlan10", "desc": "Assigns these ports to VLAN 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "interface vlan20", "cmd": "interface vlan20", "desc": "Assigns these ports to VLAN 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "interface range fastethernet 0/15 - 18", "cmd": "interface range fastethernet 0/15 - 18", "desc": "Enters switchport configuration mode for a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp 100", "cmd": "router eigrp 100", "desc": "EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network 10.0.0. 0", "cmd": "network 10.0.0. 0", "desc": "EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network 10.0.0. 0 0.255.2 55.255", "cmd": "network 10.0.0. 0 0.255.2 55.255", "desc": "EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp log-", "cmd": "eigrp log-", "desc": "EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp logneighbo rwarning s 300", "cmd": "eigrp logneighbo rwarning s 300", "desc": "EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "no router eigrp 100", "cmd": "no router eigrp 100", "desc": "EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 unicastrouting", "cmd": "ipv6 unicastrouting", "desc": "Enables the forwarding of IPv6 unicast datagrams" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface gigabitethernet 0/0/0", "cmd": "interface gigabitethernet 0/0/0", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 eigrp 100", "cmd": "ipv6 eigrp 100", "desc": "Enables EIGRP for IPv6 on the interface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip hello-interval eigrp 100 10", "cmd": "ip hello-interval eigrp 100 10", "desc": "Enables EIGRP for IPv6 on the interface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 router eigrp 100", "cmd": "ipv6 router eigrp 100", "desc": "Creates the EIGRP IPv6 process and enters router" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp router-id 10.1.1.1", "cmd": "eigrp router-id 10.1.1.1", "desc": "Enables the use of a fixed router ID" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp TEST", "cmd": "router eigrp TEST", "desc": "This command defines a single EIGRP instance that" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "address-family ipv4 autonomous-system 1", "cmd": "address-family ipv4 autonomous-system 1", "desc": "Enables the IPv4 address family and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network 172.16.10.0 0.0.0.255", "cmd": "network 172.16.10.0 0.0.0.255", "desc": "Enables EIGRP for IPv4 on interfaces in" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network 0.0.0.0", "cmd": "network 0.0.0.0", "desc": "EIGRP USING NAMED MODE CONFIGURATION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "af-interface gigabitethernet 0/0/0", "cmd": "af-interface gigabitethernet 0/0/0", "desc": "Creates a named EIGRP virtual instance" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp stub summary", "cmd": "eigrp stub summary", "desc": "Creates a named EIGRP virtual instance" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp stub connected static summary redistributed", "cmd": "eigrp stub connected static summary redistributed", "desc": "Creates a named EIGRP virtual instance" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "address-family ipv6 autonomous-system 1", "cmd": "address-family ipv6 autonomous-system 1", "desc": "All IPv6 enabled interfaces are automatically included" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "address-family ipv4 autonomous- system 1", "cmd": "address-family ipv4 autonomous- system 1", "desc": "All IPv6 enabled interfaces are automatically included" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "af-interface default", "cmd": "af-interface default", "desc": "Configures all IPv6 interfaces as passive" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "no passive- interface", "cmd": "no passive- interface", "desc": "The eigrp upgrade-cli command allows you to upgrade from" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp upgrade-cli TEST", "cmd": "eigrp upgrade-cli TEST", "desc": "Configuring Authentication in Classic Mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "key chain romeo", "cmd": "key chain romeo", "desc": "Identifies a key chain. The" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "key 1", "cmd": "key 1", "desc": "The string can contain from 1 to 80" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip authentication mode eigrp 100 md5", "cmd": "ip authentication mode eigrp 100 md5", "desc": "EIGRP packets over the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip authentication key-chain eigrp", "cmd": "ip authentication key-chain eigrp", "desc": "Identifies a key chain" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "authentication mode md5", "cmd": "authentication mode md5", "desc": "Enables message digest 5 (MD5)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "authentication mode hmac-sha-256 0 password1", "cmd": "authentication mode hmac-sha-256 0 password1", "desc": "Enables message digest 5 (MD5)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "authentication mode hmac-sha-256", "cmd": "authentication mode hmac-sha-256", "desc": "Exits from address family interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "exit-address-family", "cmd": "exit-address-family", "desc": "Identifies the key string" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip eigrp neighbor", "cmd": "show ip eigrp neighbor", "desc": "Displays EIGRP neighbor table. Incorrect" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 eigrp neighbor", "cmd": "show ipv6 eigrp neighbor", "desc": "Displays EIGRP IPv6 neighbor table. Incorrect" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show key chain", "cmd": "show key chain", "desc": "Displays key chains created on the router" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug eigrp packet", "cmd": "debug eigrp packet", "desc": "Cisco IOS Software Release 15 and later. Earlier software generally" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip summary-address", "cmd": "ip summary-address", "desc": "The administrative-distance argument is optional in this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip address 192.168.100.1 255.255.255.0", "cmd": "ip address 192.168.100.1 255.255.255.0", "desc": "The administrative-distance argument is optional in this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "bandwidth 256", "cmd": "bandwidth 256", "desc": "The administrative-distance argument is optional in this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 summary-address eigrp 100 2001:db8:0:1::/64", "cmd": "ipv6 summary-address eigrp 100 2001:db8:0:1::/64", "desc": "This command behaves similarly" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "interface serial 0/1/0", "cmd": "interface serial 0/1/0", "desc": "Configures the EIGRP hello time" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip hold-time eigrp 100 30", "cmd": "ip hold-time eigrp 100 30", "desc": "Hold time should be set to three times the hello" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 hello-interval eigrp 100 10", "cmd": "ipv6 hello-interval eigrp 100 10", "desc": "EIGRP for IPv6 process 100 to be 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 hold-time eigrp 100 30", "cmd": "ipv6 hold-time eigrp 100 30", "desc": "TIMERS FOR EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp 110", "cmd": "router eigrp 110", "desc": "Starts the EIGRP routing process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network 10.0.0.0 0.0.0.255", "cmd": "network 10.0.0.0 0.0.0.255", "desc": "EIGRP routing process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network 10.0.0.0", "cmd": "network 10.0.0.0", "desc": "EIGRP routing process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "passive-interface gigabitethernet 0/0/0", "cmd": "passive-interface gigabitethernet 0/0/0", "desc": "Prevents the sending of hello packets out" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "passive-interface default", "cmd": "passive-interface default", "desc": "Enables hello packets to be sent out" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "no passive-interface serial 0/1/0", "cmd": "no passive-interface serial 0/1/0", "desc": "Enables hello packets to be sent out" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 router eigrp 110", "cmd": "ipv6 router eigrp 110", "desc": "Returns to global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "access-list 5 deny any", "cmd": "access-list 5 deny any", "desc": "Matches and drops packets from any source. This" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip route 0.0.0.0 0.0.0.0 192.168.100.5", "cmd": "ip route 0.0.0.0 0.0.0.0 192.168.100.5", "desc": "Matches and drops packets from any source. This" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip route 0.0.0.0 0.0.0.0 serial 0/1/0", "cmd": "ip route 0.0.0.0 0.0.0.0 serial 0/1/0", "desc": "Creates EIGRP routing process 100" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute static", "cmd": "redistribute static", "desc": "Enters the IPv4 address family for AS 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network 192.168.100.0 0.0.0.255", "cmd": "network 192.168.100.0 0.0.0.255", "desc": "Enters the IPv4 address family for AS 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network 192.168.100.0", "cmd": "network 192.168.100.0", "desc": "Enters the IPv4 address family for AS 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "topology base", "cmd": "topology base", "desc": "Creates a static default route to send all traffic" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip default-network 192.168.100.0", "cmd": "ip default-network 192.168.100.0", "desc": "Assigns the IP address and subnet mask to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip summaryaddress eigrp 100 0.0.0.0 0.0.0.0 75", "cmd": "ip summaryaddress eigrp 100 0.0.0.0 0.0.0.0 75", "desc": "PASSIVE INTERFACES FOR EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip bandwidthpercent eigrp 50", "cmd": "ip bandwidthpercent eigrp 50", "desc": "Configures the percentage of bandwidth that" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 bandwidthpercent eigrp 100 75", "cmd": "ipv6 bandwidthpercent eigrp 100 75", "desc": "IPv6" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp", "cmd": "router eigrp", "desc": "Creates routing process 100" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp stub", "cmd": "eigrp stub", "desc": "Only the stub router needs to have the eigrp stub command enabled" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp stub connected", "cmd": "eigrp stub connected", "desc": "The connected option is enabled by default" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp stub static", "cmd": "eigrp stub static", "desc": "The summary option is enabled by default" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp stub receiveonly", "cmd": "eigrp stub receiveonly", "desc": "Restricts the router from sharing any of its routes" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp stub redistributed", "cmd": "eigrp stub redistributed", "desc": "Changes the default K-values used" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp CISCO", "cmd": "router eigrp CISCO", "desc": "Enters router configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "address-family ipv4 unicast autonomous-system 100", "cmd": "address-family ipv4 unicast autonomous-system 100", "desc": "STUB ROUTING FOR EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "clear ip route *", "cmd": "clear ip route *", "desc": "Deletes all routes from the IPv4 routing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "clear ip route 172.16.10.0", "cmd": "clear ip route 172.16.10.0", "desc": "Clears this specific route from the IPv4" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "clear ipv6 route *", "cmd": "clear ipv6 route *", "desc": "CPU utilization rates as the routing table is rebuilt" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "clear ipv6 route 2001:db8:c18:3::/64", "cmd": "clear ipv6 route 2001:db8:c18:3::/64", "desc": "Clears this specific route from the IPv6" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "clear ipv6 traffic", "cmd": "clear ipv6 traffic", "desc": "Resets IPv6 traffic counters" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip eigrp neighbors detail", "cmd": "show ip eigrp neighbors detail", "desc": "The show ip eigrp neighbors detail command will verify" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip eigrp interfaces", "cmd": "show ip eigrp interfaces", "desc": "Shows info for each interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip eigrp interfaces detail", "cmd": "show ip eigrp interfaces detail", "desc": "Shows more detailed information for each" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip eigrp interface serial 0/0/0", "cmd": "show ip eigrp interface serial 0/0/0", "desc": "Shows info for a specific interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip eigrp interface 100", "cmd": "show ip eigrp interface 100", "desc": "Shows info for interfaces running process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip eigrp topology", "cmd": "show ip eigrp topology", "desc": "The show ip eigrp topology command shows where" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip eigrp topology all-links", "cmd": "show ip eigrp topology all-links", "desc": "Displays all entries in the EIGRP topology" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip eigrp traffic", "cmd": "show ip eigrp traffic", "desc": "Shows the number and type of packets" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ip", "cmd": "show ip", "desc": "Displays the status of interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 interface brief", "cmd": "show ipv6 interface brief", "desc": "Displays a summarized status of interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 neighbors", "cmd": "show ipv6 neighbors", "desc": "Shows the parameters and current state of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 eigrp interfaces", "cmd": "show ipv6 eigrp interfaces", "desc": "Displays IPv6 info for each interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 eigrp interface serial 0/0/0", "cmd": "show ipv6 eigrp interface serial 0/0/0", "desc": "Displays IPv6 info for specific interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 eigrp interface 100", "cmd": "show ipv6 eigrp interface 100", "desc": "Displays IPv6 info for interfaces running" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 eigrp neighbors detail", "cmd": "show ipv6 eigrp neighbors detail", "desc": "Displays a detailed EIGRP IPv6 neighbor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 eigrp topology", "cmd": "show ipv6 eigrp topology", "desc": "Displays the EIGRP IPv6 topology table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 interface", "cmd": "show ipv6 interface", "desc": "Displays IPv6 neighbor discovery cache" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 route", "cmd": "show ipv6 route", "desc": "Displays the current IPv6 routing table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 route summary", "cmd": "show ipv6 route summary", "desc": "IPv6 routing table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 routers", "cmd": "show ipv6 routers", "desc": "Displays IPv6 router advertisement" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "show ipv6 traffic", "cmd": "show ipv6 traffic", "desc": "VERIFYING EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug eigrp fsm", "cmd": "debug eigrp fsm", "desc": "TROUBLESHOOTING EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug eigrp packets", "cmd": "debug eigrp packets", "desc": "Displays events/actions related to EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug eigrp neighbors", "cmd": "debug eigrp neighbors", "desc": "EIGRP neighbors" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug ip eigrp notifications", "cmd": "debug ip eigrp notifications", "desc": "EIGRP neighbors" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug ip eigrp", "cmd": "debug ip eigrp", "desc": "Displays EIGRP event notifications" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug ipv6 eigrp", "cmd": "debug ipv6 eigrp", "desc": "IPv6 protocol" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug ipv6 neighbor 2001:db8:c18:3::1", "cmd": "debug ipv6 neighbor 2001:db8:c18:3::1", "desc": "EIGRP for IPv6 neighbor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug ipv6 neighbor notification", "cmd": "debug ipv6 neighbor notification", "desc": "Displays EIGRP for IPv6 events and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug ipv6 neighbor summary", "cmd": "debug ipv6 neighbor summary", "desc": "Displays a summary of EIGRP for IPv6" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug ipv6 packet", "cmd": "debug ipv6 packet", "desc": "Send your debug output to a syslog server to ensure that" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "debug ipv6 routing", "cmd": "debug ipv6 routing", "desc": "TROUBLESHOOTING EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp ConfigEG", "cmd": "router eigrp ConfigEG", "desc": "EIGRP autonomous system 1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network 192.168.0.0", "cmd": "network 192.168.0.0", "desc": "Enables EIGRP for IPv4 on interfaces in the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network 192.168.1.0", "cmd": "network 192.168.1.0", "desc": "Enables EIGRP for IPv4 on interfaces in the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network 192.168.0.0 0.0.0.255", "cmd": "network 192.168.0.0 0.0.0.255", "desc": "Moves the router into address-family" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "af-interface gigabitethernet 0/0", "cmd": "af-interface gigabitethernet 0/0", "desc": "Moves the router into address-family" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "address-family ipv6 autonomous- system 1", "cmd": "address-family ipv6 autonomous- system 1", "desc": "Returns to privileged EXEC mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "address-family ipv6", "cmd": "address-family ipv6", "desc": "Returns to privileged EXEC mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "copy runningconfig startupconfig", "cmd": "copy runningconfig startupconfig", "desc": "IPV6 USING NAMED MODE" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "copy running-", "cmd": "copy running-", "desc": "IPV6 USING NAMED MODE" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "router ospf 1", "cmd": "router ospf 1", "desc": "Starts OSPF process 1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network 172.16.10.0 0.0.0.255 area 0", "cmd": "network 172.16.10.0 0.0.0.255 area 0", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network 10.10.10.1 0.0.0.0 area 51", "cmd": "network 10.10.10.1 0.0.0.0 area 51", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 0 authentication", "cmd": "area 0 authentication", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 1 range 192.168.64.0", "cmd": "area 1 range 192.168.64.0", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network 172.16.20.0 0.0.0.255 area 51", "cmd": "network 172.16.20.0 0.0.0.255 area 51", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 51 stub", "cmd": "area 51 stub", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 51 stub no-summary", "cmd": "area 51 stub no-summary", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network 172.16.20.0 0.0.0.255 area 1", "cmd": "network 172.16.20.0 0.0.0.255 area 1", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network 172.16.20.0 0.0.0.255 area 11", "cmd": "network 172.16.20.0 0.0.0.255 area 11", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 11 nssa nosummary", "cmd": "area 11 nssa nosummary", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 11 nssa", "cmd": "area 11 nssa", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network 172.16.20.0 0.0.0.255 area 0", "cmd": "network 172.16.20.0 0.0.0.255 area 0", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network", "cmd": "network", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf 1 area 0", "cmd": "ip ospf 1 area 0", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf 1 area 51", "cmd": "ip ospf 1 area 51", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf authentication", "cmd": "ip ospf authentication", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf authentication message-digest", "cmd": "ip ospf authentication message-digest", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip mtu 1400", "cmd": "ip mtu 1400", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:0:1::3 /64", "cmd": "ipv6 address 2001:db8:0:1::3 /64", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:0:2::1 /64", "cmd": "ipv6 address 2001:db8:0:2::1 /64", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:0:1::2 /64", "cmd": "ipv6 address 2001:db8:0:1::2 /64", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:0:3::1 /64", "cmd": "ipv6 address 2001:db8:0:3::1 /64", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:0:1::1 /64", "cmd": "ipv6 address 2001:db8:0:1::1 /64", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:0:7::1", "cmd": "ipv6 address 2001:db8:0:7::1", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:0:7::2 /64", "cmd": "ipv6 address 2001:db8:0:7::2 /64", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip address 192.168.2.1 255.255.255.0", "cmd": "ip address 192.168.2.1 255.255.255.0", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip address 192.168.3.1 255.255.255.0", "cmd": "ip address 192.168.3.1 255.255.255.0", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip address 172.16.1.3 255.255.255.0", "cmd": "ip address 172.16.1.3 255.255.255.0", "desc": "Because this command is configured directly on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network 172.16.10.1 0.0.0.0 area 0", "cmd": "network 172.16.10.1 0.0.0.0 area 0", "desc": "CONFIGURING MULTIAREA OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network 172.16.0.0 0.0.255.255 area 0", "cmd": "network 172.16.0.0 0.0.255.255 area 0", "desc": "CONFIGURING MULTIAREA OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network 0.0.0.0 255.255.255.255 area 0", "cmd": "network 0.0.0.0 255.255.255.255 area 0", "desc": "CONFIGURING MULTIAREA OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 router ospf", "cmd": "ipv6 router ospf", "desc": "Creates the OSPFv3 process if it has not already" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 1 stub", "cmd": "area 1 stub", "desc": "The router is configured to be part of a stub area" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 1 range 2001:db8::/48", "cmd": "area 1 range 2001:db8::/48", "desc": "The router is configured to be part of a stub area" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 1 stub no-summary", "cmd": "area 1 stub no-summary", "desc": "The router is configured to be in a totally stubby" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 1 nssa", "cmd": "area 1 nssa", "desc": "The router is configured to be in an NSSA" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 1 nssa no summary", "cmd": "area 1 nssa no summary", "desc": "Interarea OSPFv3 Route Summarization" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear ipv6 ospf 1 process", "cmd": "clear ipv6 ospf 1 process", "desc": "Configuring the IPv6 Address Family in OSPFv3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear ipv6 ospf 1 force-spf", "cmd": "clear ipv6 ospf 1 force-spf", "desc": "Configuring the IPv6 Address Family in OSPFv3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "router ospfv3 1", "cmd": "router ospfv3 1", "desc": "Enables OSPFv3 router configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "address-family ipv6 unicast", "cmd": "address-family ipv6 unicast", "desc": "Applying Parameters in Address Family Configuration Mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "address-family ipv4 unicast", "cmd": "address-family ipv4 unicast", "desc": "Applying Parameters in Address Family Configuration Mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 1 range 2001:db8:0:0::0/56", "cmd": "area 1 range 2001:db8:0:0::0/56", "desc": "Resets OSPFv3 area 1 parameters to their" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 0 range 172.16.0.0 255.255.0.0", "cmd": "area 0 range 172.16.0.0 255.255.0.0", "desc": "Sets default metric values for IPv4 and IPv6" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf authentication-", "cmd": "ip ospf authentication-", "desc": "Starts OSPF process 13" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area 0 authentication message-digest", "cmd": "area 0 authentication message-digest", "desc": "Provides another way to enable" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf message-digestkey 1 md5 secret", "cmd": "ip ospf message-digestkey 1 md5 secret", "desc": "Configuring OSPFv2 Cryptographic Authentication: SHA-256" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "key chain samplechain", "cmd": "key chain samplechain", "desc": "Specifies the key chain name and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf authentication keychain samplechain", "cmd": "ip ospf authentication keychain samplechain", "desc": "Moves to interface configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf", "cmd": "ip ospf", "desc": "Moves to interface configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf 1 area 1", "cmd": "ip ospf 1 area 1", "desc": "Moves to interface configuration" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 ospf authentication ipsec spi 500 md5 1234567890abcdef1234567890a", "cmd": "ipv6 ospf authentication ipsec spi 500 md5 1234567890abcdef1234567890ab cdef", "desc": "Moves to routing protocol" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "OSPF", "title": "area 0 authentication ipsec spi sha1 1234567890123456789012345678 9012", "cmd": "area 0 authentication ipsec spi sha1 1234567890123456789012345678 901234567890", "desc": "Verifying OSPFv2 and OSPFv3 Authentication" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip route ospf", "cmd": "show ip route ospf", "desc": "Incorrect authentication configuration will" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ospfv3 neighbor", "cmd": "show ospfv3 neighbor", "desc": "Displays the OSPFv3 neighbor table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ipv6 route ospf", "cmd": "show ipv6 route ospf", "desc": "Displays the OSPFv3 routes in the routing table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf interface gigabitethernet 0/0", "cmd": "show ip ospf interface gigabitethernet 0/0", "desc": "Verifies authentication setup on a specific" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "OSPF", "title": "show crypto ipsec sa interface gigabitethernet 0/0", "cmd": "show crypto ipsec sa interface gigabitethernet 0/0", "desc": "Displays IPsec security associations on a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "debug ip ospf adj", "cmd": "debug ip ospf adj", "desc": "Displays information about OSPF adjacencies" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "debug ipv6 ospf adj", "cmd": "debug ipv6 ospf adj", "desc": "The following sections are optional but may be required in your" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "no passiveinterface serial 0/0/1", "cmd": "no passiveinterface serial 0/0/1", "desc": "CONFIGURING TRADITIONAL OSPFV3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip route 0.0.0.0 0.0.0.0 serial 0/0/0", "cmd": "ip route 0.0.0.0 0.0.0.0 serial 0/0/0", "desc": "Summarizes area 1 routes to the specified" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "area 1 range 192.168.64.0 255.255.224.0", "cmd": "area 1 range 192.168.64.0 255.255.224.0", "desc": "Using the filter-list Command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "area 1 range 2001:db8:0:10::/60", "cmd": "area 1 range 2001:db8:0:10::/60", "desc": "Using the filter-list Command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip prefixlist MyPFList permit 172.16.0.0/16 le 32", "cmd": "ip prefixlist MyPFList permit 172.16.0.0/16 le 32", "desc": "Defines a prefix list called MyPFList" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "router ospf 202", "cmd": "router ospf 202", "desc": "Uses a prefix list called MyPFList to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "area 1 filter-list prefix MyPFList in", "cmd": "area 1 filter-list prefix MyPFList in", "desc": "Enters OSPF process 202" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "area 1 range 10.1.1.0 255.255.255.0 not-advertise", "cmd": "area 1 range 10.1.1.0 255.255.255.0 not-advertise", "desc": "Using the distribute-list in Command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 1 permit 192.168.1.0 0.0.0.255", "cmd": "access-list 1 permit 192.168.1.0 0.0.0.255", "desc": "Defines area 51 as a stub area" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "area 51 default-cost 10", "cmd": "area 51 default-cost 10", "desc": "Sets the router ID to 10.0.0.2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "network 192.168.0.0 0.0.0.255 area 51", "cmd": "network 192.168.0.0 0.0.0.255 area 51", "desc": "Sets the router ID to 10.0.0.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "network 192.168.1.0 0.0.0.255 area 3", "cmd": "network 192.168.1.0 0.0.0.255 area 3", "desc": "Sets the router ID to 10.0.0.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "area 3 virtual-link 10.0.0.1", "cmd": "area 3 virtual-link 10.0.0.1", "desc": "Sets the router ID to 10.0.0.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "network 192.168.2.0 0.0.0.255 area 0", "cmd": "network 192.168.2.0 0.0.0.255 area 0", "desc": "PROPAGATING A DEFAULT ROUTE" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "area 3 virtual-link 10.0.0.2", "cmd": "area 3 virtual-link 10.0.0.2", "desc": "PROPAGATING A DEFAULT ROUTE" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip route ospfv3", "cmd": "show ip route ospfv3", "desc": "Displays the OSPFv3 routes in the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf border-routers", "cmd": "show ip ospf border-routers", "desc": "Displays border and boundary router" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf database asbr-summary", "cmd": "show ip ospf database asbr-summary", "desc": "Displays Type-4 LSAs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf database external", "cmd": "show ip ospf database external", "desc": "Displays Type-5 LSAs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf database nssa-external", "cmd": "show ip ospf database nssa-external", "desc": "Displays network LSAs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf database router selforiginate", "cmd": "show ip ospf database router selforiginate", "desc": "Displays locally generated LSAs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf database summary", "cmd": "show ip ospf database summary", "desc": "Lists all OSPF neighbors and their" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf neighbor detail", "cmd": "show ip ospf neighbor detail", "desc": "Displays a detailed list of neighbors" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ipv6 ospf", "cmd": "show ipv6 ospf", "desc": "OSPFv3 routing process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ipv6 ospf border-routers", "cmd": "show ipv6 ospf border-routers", "desc": "Displays the internal OSPF routing table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ipv6 ospf database", "cmd": "show ipv6 ospf database", "desc": "Displays OSPFv3-related database" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ipv6 ospf database databasesummary", "cmd": "show ipv6 ospf database databasesummary", "desc": "Displays how many of each type of LSA" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ipv6 ospf interface", "cmd": "show ipv6 ospf interface", "desc": "Displays OSPFv3-related interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ipv6 ospf neighbor", "cmd": "show ipv6 ospf neighbor", "desc": "Displays OSPFv3-related neighbor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ipv6 ospf virtual-links", "cmd": "show ipv6 ospf virtual-links", "desc": "Displays parameters and the current" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf virtual-links", "cmd": "show ip ospf virtual-links", "desc": "Displays information about virtual links" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ospfv3 database", "cmd": "show ospfv3 database", "desc": "VERIFYING OSPF CONFIGURATION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear ip route a.b.c.d", "cmd": "clear ip route a.b.c.d", "desc": "Clears a specific route to network a.b.c.d" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear ip ospf counters", "cmd": "clear ip ospf counters", "desc": "Resets OSPF counters" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear ip ospf process", "cmd": "clear ip ospf process", "desc": "Displays all OSPF events" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear ip ospf 13 process", "cmd": "clear ip ospf 13 process", "desc": "Displays all OSPF events" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear ipv6 ospf process", "cmd": "clear ipv6 ospf process", "desc": "Displays all OSPF events" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear ipv6 ospf 13 process", "cmd": "clear ipv6 ospf 13 process", "desc": "Displays all OSPF events" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "debug ip ospf events", "cmd": "debug ip ospf events", "desc": "Displays all OSPF events" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "debug ip ospf adjacency", "cmd": "debug ip ospf adjacency", "desc": "Displays various OSPF states and DR/BDR" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "debug ipv6 ospf adjacency", "cmd": "debug ipv6 ospf adjacency", "desc": "Displays debug messages about the OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "debug ip ospf packet", "cmd": "debug ip ospf packet", "desc": "Displays information about each OSPF packet" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "copy runningconfig startup-", "cmd": "copy runningconfig startup-", "desc": "Enables OSPF area 0 on this interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "interface serial 0/0/1", "cmd": "interface serial 0/0/1", "desc": "This is the most precise way to place an" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network 172.16.50.1 0.0.0.0 area 0", "cmd": "network 172.16.50.1 0.0.0.0 area 0", "desc": "ASBR Router" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip address 192.168.1.1 255.255.255.2 55", "cmd": "ip address 192.168.1.1 255.255.255.2 55", "desc": "Assigns an IP address and netmask" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip address 192.168.2.1 255.255.255.255", "cmd": "ip address 192.168.2.1 255.255.255.255", "desc": "Assigns an IP address and netmask" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip address 192.168.3.1 255.255.255.255", "cmd": "ip address 192.168.3.1 255.255.255.255", "desc": "Assigns an IP address and netmask" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip address 192.168.4.1 255.255.255.255", "cmd": "ip address 192.168.4.1 255.255.255.255", "desc": "Assigns an IP address and netmask" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "description Router ID", "cmd": "description Router ID", "desc": "Creates default route. Using both an exit interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:0:1::1/ 64", "cmd": "ipv6 address 2001:db8:0:1::1/ 64", "desc": "Creates default route. Using both an exit interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:1:1::1/ 64", "cmd": "ipv6 address 2001:db8:1:1::1/ 64", "desc": "Creates default route. Using both an exit interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:0:2::1/ 64", "cmd": "ipv6 address 2001:db8:0:2::1/ 64", "desc": "Creates default route. Using both an exit interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:1:1::2/ 64", "cmd": "ipv6 address 2001:db8:1:1::2/ 64", "desc": "Creates default route. Using both an exit interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:0:3::1/ 64", "cmd": "ipv6 address 2001:db8:0:3::1/ 64", "desc": "Creates default route. Using both an exit interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 address 2001:db8:1:1::3/ 64", "cmd": "ipv6 address 2001:db8:1:1::3/ 64", "desc": "Creates default route. Using both an exit interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip route 11.0.0.0 255.0.0.0 null0", "cmd": "ip route 11.0.0.0 255.0.0.0 null0", "desc": "Creates a static route to a null interface. In this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip route 12.0.0.0 255.0.0.0 null0", "cmd": "ip route 12.0.0.0 255.0.0.0 null0", "desc": "Sets the default route to be propagated to all OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip route 13.0.0.0 255.0.0.0 null0", "cmd": "ip route 13.0.0.0 255.0.0.0 null0", "desc": "Sets the default route to be propagated to all OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "interface gigabitethern et 1/0", "cmd": "interface gigabitethern et 1/0", "desc": "Sets the default route to be propagated to all OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "hostname ABR-1", "cmd": "hostname ABR-1", "desc": "Enables OSPF on this interface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "hostname ABR-2", "cmd": "hostname ABR-2", "desc": "Enables OSPF on this interface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf priority 200", "cmd": "ip ospf priority 200", "desc": "Places this interface into OSPF area 0 and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf priority 100", "cmd": "ip ospf priority 100", "desc": "Moves to global configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "hostname Internal", "cmd": "hostname Internal", "desc": "Configures a global IPv6 address on the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 ospf 1 area 1", "cmd": "ipv6 ospf 1 area 1", "desc": "Enables OSPFv3 on the interface and places this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ipv6 router", "cmd": "ipv6 router", "desc": "TROUBLESHOOTING OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "address-family", "cmd": "address-family", "desc": "TROUBLESHOOTING OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "network 172.16.0.0", "cmd": "network 172.16.0.0", "desc": "DEFINING SEED AND DEFAULT METRICS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "distance eigrp 80 105", "cmd": "distance eigrp 80 105", "desc": "DEFINING SEED AND DEFAULT METRICS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute ospf 1", "cmd": "redistribute ospf 1", "desc": "The metrics assigned to these learned routes" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute ospf 1 metric 1000 100 255 1 1500", "cmd": "redistribute ospf 1 metric 1000 100 255 1 1500", "desc": "Starts the OSPF routing process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute connected", "cmd": "redistribute connected", "desc": "The connected keyword refers to routes that are established" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute eigrp 10 metric 100 subnets", "cmd": "redistribute eigrp 10 metric 100 subnets", "desc": "The connected keyword refers to routes that are established" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "distance ospf intra-area 105 inter-area 105 external", "cmd": "distance ospf intra-area 105 inter-area 105 external", "desc": "The connected keyword refers to routes that are established" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute connected metric 50", "cmd": "redistribute connected metric 50", "desc": "EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip route 10.1.1.0 255.255.255.0 serial 0/0/0", "cmd": "ip route 10.1.1.0 255.255.255.0 serial 0/0/0", "desc": "Serial 0/0/0" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "redistribute ospf 1 match internal external 1", "cmd": "redistribute ospf 1 match internal external 1", "desc": "REDISTRIBUTING SUBNETS INTO OSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp DEMO", "cmd": "router eigrp DEMO", "desc": "REDISTRIBUTION FOR IPV6" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "redistribute ospf 1 metric 1500 10 255", "cmd": "redistribute ospf 1 metric 1500 10 255", "desc": "The include-connected keywords instruct the source routing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute eigrp 10 includeconnected", "cmd": "redistribute eigrp 10 includeconnected", "desc": "Redistributes IPv6 routes from EIGRP AS 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute eigrp 10 metric-type 1 include-connected", "cmd": "redistribute eigrp 10 metric-type 1 include-connected", "desc": "AS 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "show ip rip database", "cmd": "show ip rip database", "desc": "Displays summary address entries in the RIP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "show ipv6 rip database", "cmd": "show ipv6 rip database", "desc": "Displays the link-state advertisement (LSA)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "access-list 10 deny 10.0.0.0 0.255.255.255", "cmd": "access-list 10 deny 10.0.0.0 0.255.255.255", "desc": "Creates a standard ACL number 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "access-list 10 permit any", "cmd": "access-list 10 permit any", "desc": "Adds a second line to ACL 10 which" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp 1", "cmd": "router eigrp 1", "desc": "Adds a second line to ACL 20 which" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "router", "cmd": "router", "desc": "Distribute Lists" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "access-list 30 permit 172.16.1.0 0.0.0.255", "cmd": "access-list 30 permit 172.16.1.0 0.0.0.255", "desc": "Creates a standard ACL number 30 and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "access-list 30 permit 172.16.2.0 0.0.0.255", "cmd": "access-list 30 permit 172.16.2.0 0.0.0.255", "desc": "Enters the OSPFv3 IPv4 address family" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute eigrp 10", "cmd": "redistribute eigrp 10", "desc": "The following examples show how you can use the prefix-list" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip prefixlist ROSE permit 192.0.0.0/8 le 24", "cmd": "ip prefixlist ROSE permit 192.0.0.0/8 le 24", "desc": "Prefix List to Control Redistribution" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip prefix-list FILTER seq 5 permit 172.16.1.0/24", "cmd": "ip prefix-list FILTER seq 5 permit 172.16.1.0/24", "desc": "Creates a prefix list called FILTER with a first" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip prefix-list FILTER seq 10 permit 172.16.2.0/24", "cmd": "ip prefix-list FILTER seq 10 permit 172.16.2.0/24", "desc": "Enters OSPF process ID 1 routing process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute eigrp 10 subnets", "cmd": "redistribute eigrp 10 subnets", "desc": "VERIFYING ROUTE REDISTRIBUTION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute eigrp 10 subnets route-map FILTER", "cmd": "redistribute eigrp 10 subnets route-map FILTER", "desc": "VERIFYING ROUTE REDISTRIBUTION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "route-map MY_MAP permit 10", "cmd": "route-map MY_MAP permit 10", "desc": "Specifies the match criteria (the conditions that" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "match ip", "cmd": "match ip", "desc": "Specifies the match criteria (the conditions that" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set metric 500", "cmd": "set metric 500", "desc": "Specifies the set action (what action is to be" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "route-map MY_MAP permit 30", "cmd": "route-map MY_MAP permit 30", "desc": "Specifies the set action (what action is to be" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set ip next-hop 209.165.201.1", "cmd": "set ip next-hop 209.165.201.1", "desc": "Specifies the set action (what action is to be" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set metric-type type-1", "cmd": "set metric-type type-1", "desc": "Specifies a second set action for the same match" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set metric-type type-2", "cmd": "set metric-type type-2", "desc": "Specifies a second set action for the same match" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set interface serial 0/2/0", "cmd": "set interface serial 0/2/0", "desc": "Specifies a second set action for the same match" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "route-map PBR permit 20", "cmd": "route-map PBR permit 20", "desc": "Specifies a second set action for the same match" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "route-map MY_MAP deny 20", "cmd": "route-map MY_MAP deny 20", "desc": "USING ROUTE MAPS WITH ROUTE REDISTRIBUTION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "match ip address prefixlist MY_PFL", "cmd": "match ip address prefixlist MY_PFL", "desc": "USING ROUTE MAPS WITH ROUTE REDISTRIBUTION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "router ospf 10", "cmd": "router ospf 10", "desc": "USING ROUTE MAPS WITH ROUTE REDISTRIBUTION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set metric 5000", "cmd": "set metric 5000", "desc": "Enters OSPF process ID 10 routing process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set ip default nexthop 209.165.201.1", "cmd": "set ip default nexthop 209.165.201.1", "desc": "Enters OSPF process ID 10 routing process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute eigrp 1 routemap MY_MAP subnets", "cmd": "redistribute eigrp 1 routemap MY_MAP subnets", "desc": "The objective is to only redistribute networks 172.16.1.0/24 and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "access-list 5 permit 172.16.1.0 0.0.0.255", "cmd": "access-list 5 permit 172.16.1.0 0.0.0.255", "desc": "Creates a standard ACL number 5 and explicitly" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "access-list 5 permit 172.16.2.0 0.0.0.255", "cmd": "access-list 5 permit 172.16.2.0 0.0.0.255", "desc": "Adds a second line to ACL 5 that explicitly" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "route-map FILTER permit 10", "cmd": "route-map FILTER permit 10", "desc": "Creates a route map called FILTER. This route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "match ip address 5", "cmd": "match ip address 5", "desc": "Creates a route map named EIGRPtoOSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set metric 50", "cmd": "set metric 50", "desc": "Creates a route map named EIGRPtoOSPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "match tag 11", "cmd": "match tag 11", "desc": "EIGRPtoOSPF permitting all other routes to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "route-map EIGRPtoOSPF permit 20", "cmd": "route-map EIGRPtoOSPF permit 20", "desc": "EIGRPtoOSPF permitting all other routes to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set tag 22", "cmd": "set tag 22", "desc": "Creates a route map named OSPFtoEIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "route-map OSPFtoEIGRP deny 10", "cmd": "route-map OSPFtoEIGRP deny 10", "desc": "Creates a route map named OSPFtoEIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "match tag 22", "cmd": "match tag 22", "desc": "OSPFtoEIGRP permitting all other routes to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "route-map OSPFtoEIGRP permit 20", "cmd": "route-map OSPFtoEIGRP permit 20", "desc": "OSPFtoEIGRP permitting all other routes to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set tag 11", "cmd": "set tag 11", "desc": "Enters OSPF configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "router ospf 11", "cmd": "router ospf 11", "desc": "Enters OSPF configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "redistribute eigrp 22 subnets route-map EIGRPtoOSPF", "cmd": "redistribute eigrp 22 subnets route-map EIGRPtoOSPF", "desc": "Redistributes all EIGRP routes with a tag of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp 22", "cmd": "router eigrp 22", "desc": "USING ROUTE MAPS WITH ROUTE REDISTRIBUTION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router bgp 65001", "cmd": "router bgp 65001", "desc": "Starts the BGP routing process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "distance bgp 30 200 220", "cmd": "distance bgp 30 200 220", "desc": "Changes the AD to 30 for external" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "distance 50", "cmd": "distance 50", "desc": "Sets an AD of 50 for all routes learned through a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "distance 255", "cmd": "distance 255", "desc": "Sets the AD to 85 for all routes learned from" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "distance 125 172.16.200.5 0.0.0.0 10", "cmd": "distance 125 172.16.200.5 0.0.0.0 10", "desc": "Path control is the mechanism that changes default packet" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "route-map ISP1 permit 10", "cmd": "route-map ISP1 permit 10", "desc": "The sequence-numb er is used to indicate the position the route map" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "match ip address 1", "cmd": "match ip address 1", "desc": "Defines where to output packets that pass a match" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "set default interface serial 0/2/0", "cmd": "set default interface serial 0/2/0", "desc": "This is recommended for point-to-point links only" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip local policy route-map ISP1", "cmd": "ip local policy route-map ISP1", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip policy route-map ISP1", "cmd": "ip policy route-map ISP1", "desc": "EIGRP routes and to 105 for EIGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "show ip policy", "cmd": "show ip policy", "desc": "Displays route maps that are configured on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "debug ip policy", "cmd": "debug ip policy", "desc": "Enables the display of IP policy routing events" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "traceroute", "cmd": "traceroute", "desc": "The objective is to forward Internet traffic sourced from the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ping", "cmd": "ping", "desc": "The objective is to forward Internet traffic sourced from the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "access-list 11 permit 10.1.1.0 0.0.0.255", "cmd": "access-list 11 permit 10.1.1.0 0.0.0.255", "desc": "Creates a standard access list that matches traffic" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "route-map PBR permit 10", "cmd": "route-map PBR permit 10", "desc": "Creates a route map named PBR. This route map" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "match ip address 11", "cmd": "match ip address 11", "desc": "Adds a second statement to the PBR route map. A" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set ip next-hop 192.168.1.1", "cmd": "set ip next-hop 192.168.1.1", "desc": "Adds a second statement to the PBR route map. A" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "match ip address 12", "cmd": "match ip address 12", "desc": "Adds a third statement to the PBR route map. A" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set ip next-hop 192.168.2.1", "cmd": "set ip next-hop 192.168.2.1", "desc": "Adds a third statement to the PBR route map. A" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set default interface null0", "cmd": "set default interface null0", "desc": "Enters GigabitEthernet 0/0/0 interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip policy routemap PBR", "cmd": "ip policy routemap PBR", "desc": "Configuring Authentication for IP SLA" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "key chain Juliet", "cmd": "key chain Juliet", "desc": "Identifies a key chain" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip sla key-chain Juliet", "cmd": "ip sla key-chain Juliet", "desc": "Monitoring IP SLA Operations" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "show ip sla application", "cmd": "show ip sla application", "desc": "The show ip sla application command displays" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "show ip sla configuration 11", "cmd": "show ip sla configuration 11", "desc": "The use of a number in this command is optional" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "show ip sla statistics", "cmd": "show ip sla statistics", "desc": "Step 1: Define Probe(s)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip sla 1", "cmd": "ip sla 1", "desc": "Exits IP SLA ICMP echo configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip sla schedule 1 start-time now life forever", "cmd": "ip sla schedule 1 start-time now life forever", "desc": "Step 2: Define Tracking Object(s)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "track 11 ip sla 1 reachability", "cmd": "track 11 ip sla 1 reachability", "desc": "Step 3a: Define the Action on the Tracking Object(s)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip route 0.0.0.0 0.0.0.0", "cmd": "ip route 0.0.0.0 0.0.0.0", "desc": "Adds a default route with a next hop of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "route-map IPSLA permit 10", "cmd": "route-map IPSLA permit 10", "desc": "Creates a route map that will use the tracking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "set ip next-hop verifyavailability 192.168.1.1 10 track 11", "cmd": "set ip next-hop verifyavailability 192.168.1.1 10 track 11", "desc": "Enters interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "ip policy route-map IPSLA", "cmd": "ip policy route-map IPSLA", "desc": "Step 4: Verify IP SLA Operations" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "show ip sla configuration", "cmd": "show ip sla configuration", "desc": "Displays the current operational status and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Routing", "title": "show track", "cmd": "show track", "desc": "VERIFYING POLICY-BASED ROUTING" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 100", "cmd": "router bgp 100", "desc": "Cisco IOS Software permits only one Border Gateway Protocol (BGP)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.31.7.1 remote-as 200", "cmd": "neighbor 192.31.7.1 remote-as 200", "desc": "If the AS number configured in the router bgp command is identical" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "network 192.135.250.0", "cmd": "network 192.135.250.0", "desc": "CONFIGURING BGP: CLASSIC CONFIGURATION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "network 128.107.0.0 mask 255.255.255.0", "cmd": "network 128.107.0.0 mask 255.255.255.0", "desc": "CONFIGURING BGP: CLASSIC CONFIGURATION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.0.0.44 activate", "cmd": "neighbor 10.0.0.44 activate", "desc": "CONFIGURING BGP: CLASSIC CONFIGURATION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "clear ip bgp *", "cmd": "clear ip bgp *", "desc": "CONFIGURING BGP: CLASSIC CONFIGURATION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show ip bgp neighbor address advertised", "cmd": "show ip bgp neighbor address advertised", "desc": "CONFIGURING BGP: CLASSIC CONFIGURATION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show ip bgp neighbor address received", "cmd": "show ip bgp neighbor address received", "desc": "CONFIGURING BGP: CLASSIC CONFIGURATION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show ip bgp neighbor address routes", "cmd": "show ip bgp neighbor address routes", "desc": "CONFIGURING BGP: CLASSIC CONFIGURATION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 172.16.20.1 remote-as 150", "cmd": "neighbor 172.16.20.1 remote-as 150", "desc": "CONFIGURING BGP: CLASSIC CONFIGURATION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 172.17.1.1 remote-as 200", "cmd": "neighbor 172.17.1.1 remote-as 200", "desc": "CONFIGURING BGP: CLASSIC CONFIGURATION" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 65500", "cmd": "router bgp 65500", "desc": "Starts the BGP routing process" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 2001:db8:12::2 remote-as 65501", "cmd": "neighbor 2001:db8:12::2 remote-as 65501", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 2001:db8:12::1 remote-as 65500", "cmd": "neighbor 2001:db8:12::1 remote-as 65500", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor", "cmd": "neighbor", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.20.20.1 remote-as 64511", "cmd": "neighbor 10.20.20.1 remote-as 64511", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.10.10.1 remote-as 64496", "cmd": "neighbor 10.10.10.1 remote-as 64496", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.7.1 remoteas 100", "cmd": "neighbor 192.168.7.1 remoteas 100", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.7.1 routemap SETWEIGHT in", "cmd": "neighbor 192.168.7.1 routemap SETWEIGHT in", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 172.17.1.1 remote-as 300", "cmd": "neighbor 172.17.1.1 remote-as 300", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "network 192.168.219.0", "cmd": "network 192.168.219.0", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.2.0.1 remote-as 300", "cmd": "neighbor 10.2.0.1 remote-as 300", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.4.0.2 remote-as 100", "cmd": "neighbor 10.4.0.2 remote-as 100", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.2.0.2 remote-as 100", "cmd": "neighbor 10.2.0.2 remote-as 100", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.3.0.2 remote-as 100", "cmd": "neighbor 10.3.0.2 remote-as 100", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.100.1 remote-as 200", "cmd": "neighbor 192.168.100.1 remote-as 200", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 172.16.1.2 remote-as 3", "cmd": "neighbor 172.16.1.2 remote-as 3", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 209.165.202.129 prefix-list ISP1 in", "cmd": "neighbor 209.165.202.129 prefix-list ISP1 in", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 209.165.200.225 prefix-list ISP2 in", "cmd": "neighbor 209.165.200.225 prefix-list ISP2 in", "desc": "Disables the IPv4 unicast address family for the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 2001:0db8:12: :2 remote-as 65501", "cmd": "neighbor 2001:0db8:12: :2 remote-as 65501", "desc": "Starts BGP routing process 100" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.0.0.44 remote-as 200", "cmd": "neighbor 10.0.0.44 remote-as 200", "desc": "Adds the IPv4 address of the neighbor in the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 2001:db8:0:cc00: :1 remote-as 200", "cmd": "neighbor 2001:db8:0:cc00: :1 remote-as 200", "desc": "Adds the IPv6 address of the neighbor in the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "address-family ipv4", "cmd": "address-family ipv4", "desc": "Enters into address-family configuration mode for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "address-family ipv4 multicast", "cmd": "address-family ipv4 multicast", "desc": "Enters into address-family configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "address-family ipv4 vrf", "cmd": "address-family ipv4 vrf", "desc": "Enables the exchange of information with a BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "no neighbor 2001:db8:1:1::1 activate", "cmd": "no neighbor 2001:db8:1:1::1 activate", "desc": "Disables the exchange of information with the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "network 10.108.0.0 mask 255.255.0.0", "cmd": "network 10.108.0.0 mask 255.255.0.0", "desc": "Specifies the network to be advertised by the BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 2001:db8:0:cc00: :1 activate", "cmd": "neighbor 2001:db8:0:cc00: :1 activate", "desc": "IPv6 address family with the local device" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "network 2001:db8:1:1::/6 4", "cmd": "network 2001:db8:1:1::/6 4", "desc": "Exchange IPv4 and IPv6 Routes" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.1.2 remoteas 65501", "cmd": "neighbor 192.168.1.2 remoteas 65501", "desc": "Unicast address prefixes are the default when IPv4 address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.1.2 activate", "cmd": "neighbor 192.168.1.2 activate", "desc": "Enables the exchange of IPv4 BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "network 10.1.1.1 mask 255.255.255.255", "cmd": "network 10.1.1.1 mask 255.255.255.255", "desc": "Exits the IPv4 address-family configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "network 10.2.2.2 mask 255.255.255.255", "cmd": "network 10.2.2.2 mask 255.255.255.255", "desc": "Exits the IPv4 address-family configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 2001:db8:12::2 activate", "cmd": "neighbor 2001:db8:12::2 activate", "desc": "Enables the exchange of IPv6 BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "network 2001:db8:2::1/64", "cmd": "network 2001:db8:2::1/64", "desc": "Enables the forwarding of IPv6 unicast" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 65501", "cmd": "router bgp 65501", "desc": "Configures R1 as an IPv6 BGP neighbor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.1.1 remoteas 65500", "cmd": "neighbor 192.168.1.1 remoteas 65500", "desc": "Enters IPv4 address-family configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.1.1 activate", "cmd": "neighbor 192.168.1.1 activate", "desc": "Enters IPv6 address-family configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 2001:db8:12::1 activate", "cmd": "neighbor 2001:db8:12::1 activate", "desc": "Cisco implementation of 4-byte autonomous system (AS) numbers" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp asnotation dot", "cmd": "bgp asnotation dot", "desc": "IPv6" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 64511", "cmd": "router bgp 64511", "desc": "Identifies R1 as an EBGP neighbor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 172.16.1.2 remote-as 64511", "cmd": "neighbor 172.16.1.2 remote-as 64511", "desc": "Identifies R3 as an IBGP neighbor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 172.16.1.2 update-source loopback 0", "cmd": "neighbor 172.16.1.2 update-source loopback 0", "desc": "Informs R2 to use the Loopback 0 IP address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 172.16.1.2 next-hop-self", "cmd": "neighbor 172.16.1.2 next-hop-self", "desc": "IBGP NEXT-HOP BEHAVIOR" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip route 10.20.20.1 255.255.255.255 209.165.201.2", "cmd": "ip route 10.20.20.1 255.255.255.255 209.165.201.2", "desc": "Defines a static route to the Loopback 0" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 64496", "cmd": "router bgp 64496", "desc": "Identifies a peer router at 10.20.20.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.20.20.1 update-source loopback 0", "cmd": "neighbor 10.20.20.1 update-source loopback 0", "desc": "Informs R1 to use the Loopback 0 IP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.20.20.1 ebgp-multihop 2", "cmd": "neighbor 10.20.20.1 ebgp-multihop 2", "desc": "Allows for two routers that are not" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip route 10.10.10.1", "cmd": "ip route 10.10.10.1", "desc": "Identifies a peer router at 10.10.10.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.10.10.1 update-source loopback 0", "cmd": "neighbor 10.10.10.1 update-source loopback 0", "desc": "Informs R2 to use the Loopback 0 IP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.10.10.1 ebgp-multihop 2", "cmd": "neighbor 10.10.10.1 ebgp-multihop 2", "desc": "Weight is a Cisco-specific parameter. The weight is configured" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 300", "cmd": "router bgp 300", "desc": "Identifies a peer router at" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.7.1 weight 2000", "cmd": "neighbor 192.168.7.1 weight 2000", "desc": "Sets the weight of all route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.219.1 weight 1000", "cmd": "neighbor 192.168.219.1 weight 1000", "desc": "Sets the weight of all route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 198.133.219.1 remote-as 7", "cmd": "neighbor 198.133.219.1 remote-as 7", "desc": "Sets the weight of all route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 198.133.219.1 removeprivate-as", "cmd": "neighbor 198.133.219.1 removeprivate-as", "desc": "Sets the weight of all route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.100.1 default-originate", "cmd": "neighbor 192.168.100.1 default-originate", "desc": "Sets the weight of all route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.219.1 remote-as 200", "cmd": "neighbor 192.168.219.1 remote-as 200", "desc": "The result of this configuration will have Houston forward traffic" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip prefix-list AS400_ROUTES permit 172.16.10.0/24", "cmd": "ip prefix-list AS400_ROUTES permit 172.16.10.0/24", "desc": "Creates a prefix list that matches the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "route-map SETWEIGHT permit 10", "cmd": "route-map SETWEIGHT permit 10", "desc": "Creates a route map called SETWEIGHT. This" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "match ip address prefixlist AS400_ROUTES", "cmd": "match ip address prefixlist AS400_ROUTES", "desc": "Specifies the condition under which policy" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set weight 200", "cmd": "set weight 200", "desc": "Creates the second statement for the route map" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set local-preference 200", "cmd": "set local-preference 200", "desc": "Creates the second statement for the route map" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set weight 100", "cmd": "set weight 100", "desc": "A path with a higher local preference is preferred. The local" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp default local-preference 150", "cmd": "bgp default local-preference 150", "desc": "Manipulate the Local Preference Attribute" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 256", "cmd": "router bgp 256", "desc": "Identifies a peer router at 172.17.1.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 172.17.1.1 route-map SETLOCAL in", "cmd": "neighbor 172.17.1.1 route-map SETLOCAL in", "desc": "Refers to a route map called SETLOCAL. All" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.1.1.1 remote-as 256", "cmd": "neighbor 10.1.1.1 remote-as 256", "desc": "Returns to global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip as-path accesslist 7 permit ^300$", "cmd": "ip as-path accesslist 7 permit ^300$", "desc": "Permits updates whose AS path attribute" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "route-map SETPATH permit 10", "cmd": "route-map SETPATH permit 10", "desc": "Permits updates whose AS path attribute" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "route-map SETMEDOUT permit 10", "cmd": "route-map SETMEDOUT permit 10", "desc": "Permits updates whose AS path attribute" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "route-map SETLOCAL permit 10", "cmd": "route-map SETLOCAL permit 10", "desc": "Creates a route map called SETLOCAL. This" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "match as-path 7", "cmd": "match as-path 7", "desc": "Tells the BGP process what locally learned" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.220.2 remote-as 200", "cmd": "neighbor 192.168.220.2 remote-as 200", "desc": "Identifies a peer router at 192.168.220.2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.7.2 remote-as 100", "cmd": "neighbor 192.168.7.2 remote-as 100", "desc": "Identifies a peer router at 192.168.7.2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.7.2 route-map SETPATH out", "cmd": "neighbor 192.168.7.2 route-map SETPATH out", "desc": "Creates a route map named SETPATH. This" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set as-path prepend", "cmd": "set as-path prepend", "desc": "The result of this configuration is that the AS path attribute of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 1", "cmd": "router bgp 1", "desc": "Identifies a peer router at 10.2.0.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.3.0.1 remote-as 300", "cmd": "neighbor 10.3.0.1 remote-as 300", "desc": "Identifies a peer router at 10.4.0.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.2.0.2 route-map SETMEDOUT out", "cmd": "neighbor 10.2.0.2 route-map SETMEDOUT out", "desc": "Identifies a peer router at 10.4.0.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 400", "cmd": "router bgp 400", "desc": "Identifies a peer router at 10.4.0.2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.4.0.2 route-map SETMEDOUT out", "cmd": "neighbor 10.4.0.2 route-map SETMEDOUT out", "desc": "Refers to a route map named SETMEDOUT" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.5.0.2 remote-as 300", "cmd": "neighbor 10.5.0.2 remote-as 300", "desc": "This route map will permit traffic based on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.1.0.2 remote-as 300", "cmd": "neighbor 10.1.0.2 remote-as 300", "desc": "This route map will permit traffic based on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.1.0.1 remote-as 300", "cmd": "neighbor 10.1.0.1 remote-as 300", "desc": "This route map will permit traffic based on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set", "cmd": "set", "desc": "Identifies a peer router at 10.3.0.2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set metric 120", "cmd": "set metric 120", "desc": "Identifies a peer router at 10.3.0.2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set metric 200", "cmd": "set metric 200", "desc": "Identifies a peer router at 10.3.0.2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.3.0.2 route-map SETMEDOUT out", "cmd": "neighbor 10.3.0.2 route-map SETMEDOUT out", "desc": "Identifies a peer router at 10.1.0.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.5.0.1 remote-as 400", "cmd": "neighbor 10.5.0.1 remote-as 400", "desc": "To force Mazatlan to include updates for network 192.168.100.0" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.4.0.1 remote-as 400", "cmd": "neighbor 10.4.0.1 remote-as 400", "desc": "EBGP MULTIHOP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp always-compare-med", "cmd": "bgp always-compare-med", "desc": "EBGP MULTIHOP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show bgp all community", "cmd": "show bgp all community", "desc": "Displays routes for all address families" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show bgp all neighbors", "cmd": "show bgp all neighbors", "desc": "Displays information about BGP connections" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show bgp ipv6 unicast", "cmd": "show bgp ipv6 unicast", "desc": "Displays entries in the IPv6 BGP routing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show bgp ipv6 unicast ribfailure", "cmd": "show bgp ipv6 unicast ribfailure", "desc": "Displays the IPv6 BGP routes that fail to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show ip bgp", "cmd": "show ip bgp", "desc": "Displays entries in the BGP table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show ip bgp neighbors", "cmd": "show ip bgp neighbors", "desc": "Displays networks that are not installed in" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show ip bgp summary", "cmd": "show ip bgp summary", "desc": "Displays the status of all IPv4 BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show bgp ipv6 unicast summary", "cmd": "show bgp ipv6 unicast summary", "desc": "Displays the status of all IPv6 BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show ip route bgp", "cmd": "show ip route bgp", "desc": "Displays the IPv4 BGP entries from the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show bgp ipv6 unicast neighbors", "cmd": "show bgp ipv6 unicast neighbors", "desc": "Displays the IPv4 BGP entries from the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show ipv6 route bgp", "cmd": "show ipv6 route bgp", "desc": "Forces BGP to clear its table and resets all BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "clear ip bgp ipv4", "cmd": "clear ip bgp ipv4", "desc": "Resets BGP connections for the IPv4 unicast address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "clear ip bgp ipv6 unicast autonomoussystem-number", "cmd": "clear ip bgp ipv6 unicast autonomoussystem-number", "desc": "Resets BGP connections for the IPv6 unicast address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "clear ip bgp 10.1.1.1", "cmd": "clear ip bgp 10.1.1.1", "desc": "Resets the specific BGP session with the neighbor at" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "clear ip bgp 10.1.1.2 soft out", "cmd": "clear ip bgp 10.1.1.2 soft out", "desc": "The clear ip bgp w.x.y.z soft out command is highly recommended when" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.1.1.2 softreconfiguratio n inbound", "cmd": "neighbor 10.1.1.2 softreconfiguratio n inbound", "desc": "The soft-reconfiguration inbound command is memory intensive" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "clear ip bgp 10.1.1.2 soft in", "cmd": "clear ip bgp 10.1.1.2 soft in", "desc": "Uses the stored information to generate new" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "clear", "cmd": "clear", "desc": "Creates a dynamic soft reset of inbound BGP routing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "debug ip bgp", "cmd": "debug ip bgp", "desc": "Displays all information related to BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "debug ip bgp events", "cmd": "debug ip bgp events", "desc": "Displays all BGP event information" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "debug ip bgp updates", "cmd": "debug ip bgp updates", "desc": "Displays information about the processing of BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "debug ip bgp ipv4 unicast", "cmd": "debug ip bgp ipv4 unicast", "desc": "Displays all IPv4 unicast address family information" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "debug ip bgp ipv6 unicast", "cmd": "debug ip bgp ipv6 unicast", "desc": "VERIFYING BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 65010", "cmd": "router bgp 65010", "desc": "Enters BGP routing configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.1.1.1 routereflector-client", "cmd": "neighbor 10.1.1.1 routereflector-client", "desc": "Configures the local router as a BGP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 10.3.3.3 routereflector-client", "cmd": "neighbor 10.3.3.3 routereflector-client", "desc": "Matches 0 or more single- or multiple-character patterns" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip as-path access-list 1 permit 2150", "cmd": "ip as-path access-list 1 permit 2150", "desc": "Matches any AS path that includes the pattern of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show ip bgp regexp 2150", "cmd": "show ip bgp regexp 2150", "desc": "To find all subnets reachable via AS 65002 (AS path begins with" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "show ip bgp regexp ^$ Network Next Hop *>i192.168.3.3/32 0.0.0.0", "cmd": "show ip bgp regexp ^$ Network Next Hop *>i192.168.3.3/32 0.0.0.0", "desc": "Distribute Lists" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 3", "cmd": "router bgp 3", "desc": "Identifies a peer router at 172.16.1.2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 172.16.20.1 remote-as 1", "cmd": "neighbor 172.16.20.1 remote-as 1", "desc": "Identifies a peer router at 172.16.20.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 172.16.20.1", "cmd": "neighbor 172.16.20.1", "desc": "Creates the filter that allows all other" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "access-list 101 permit ip 172.16.0.0 0.0.255.255 255.255.0.0 0.0.0.0", "cmd": "access-list 101 permit ip 172.16.0.0 0.0.255.255 255.255.0.0 0.0.0.0", "desc": "Path Access Lists" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip prefixlist ISP1 permit 0.0.0.0 ge 16 le 24", "cmd": "ip prefixlist ISP1 permit 0.0.0.0 ge 16 le 24", "desc": "Creates a prefix list that only permits" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip as-path access-list 1 permit ^$", "cmd": "ip as-path access-list 1 permit ^$", "desc": "Creates an AS path access list matching" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 65000", "cmd": "router bgp 65000", "desc": "Assigns the ISP1 prefix list to neighbor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 209.165.202.129 filter-list 1 out", "cmd": "neighbor 209.165.202.129 filter-list 1 out", "desc": "Assigns the AS path access list to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip prefixlist ISP2 permit 0.0.0.0 ge 16 le 24", "cmd": "ip prefixlist ISP2 permit 0.0.0.0 ge 16 le 24", "desc": "Assigns the ISP2 prefix list to neighbor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 209.165.200.225 filter-list 1 out", "cmd": "neighbor 209.165.200.225 filter-list 1 out", "desc": "Starts the BGP routing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor INTERNAL peer-group", "cmd": "neighbor INTERNAL peer-group", "desc": "Creates a BGP peer" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor INTERNAL remote-as 65500", "cmd": "neighbor INTERNAL remote-as 65500", "desc": "Assigns a first parameter" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor INTERNAL next-hop-self", "cmd": "neighbor INTERNAL next-hop-self", "desc": "Assigns a second" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor INTERNAL update-source loopback 0", "cmd": "neighbor INTERNAL update-source loopback 0", "desc": "Assigns a third" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor INTERNAL route-reflector-client", "cmd": "neighbor INTERNAL route-reflector-client", "desc": "Assigns a fourth" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.1.2 peer-group INTERNAL", "cmd": "neighbor 192.168.1.2 peer-group INTERNAL", "desc": "Assigns the peer group to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.1.3 peer-group INTERNAL", "cmd": "neighbor 192.168.1.3 peer-group INTERNAL", "desc": "Authentication for routers using BGP relies on the use of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.1.4 peer-group INTERNAL", "cmd": "neighbor 192.168.1.4 peer-group INTERNAL", "desc": "Authentication for routers using BGP relies on the use of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 192.168.1.5 peer-group INTERNAL", "cmd": "neighbor 192.168.1.5 peer-group INTERNAL", "desc": "Authentication for routers using BGP relies on the use of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp 65100", "cmd": "router bgp 65100", "desc": "Defines a BGP peer at IP address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 209.165.202.130 password P@55word", "cmd": "neighbor 209.165.202.130 password P@55word", "desc": "Enables MD5 authentication on a TCP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor 2001:db8:0:10::1 password P@55word", "cmd": "neighbor 2001:db8:0:10::1 password P@55word", "desc": "ROUTE REFLECTORS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 209.165.201.2 255.255.255.248", "cmd": "ip address 209.165.201.2 255.255.255.248", "desc": "Assigns a public IP address to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface gigabitethernet 0/0/1", "cmd": "interface gigabitethernet 0/0/1", "desc": "Enters GigabitEthernet 0/0/1 interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat inside source static 192.168.1.10 209.165.201.5", "cmd": "ip nat inside source static 192.168.1.10 209.165.201.5", "desc": "Defines an access list that identifies the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat inside source list 1 pool R1_POOL", "cmd": "ip nat inside source list 1 pool R1_POOL", "desc": "Defines an access list that identifies the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat inside source list 1 interface gigabitethern et 0/0/0", "cmd": "ip nat inside source list 1 interface gigabitethern et 0/0/0", "desc": "Defines an access list that identifies the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip route 0.0.0.0 0.0.0.0 198.133.219.2", "cmd": "ip route 0.0.0.0 0.0.0.0 198.133.219.2", "desc": "Defines an access list that identifies the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ip dhcp excluded-address 172.16.10.1 172.16.10.10", "cmd": "ip dhcp excluded-address 172.16.10.1 172.16.10.10", "desc": "Defines an access list that identifies the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip route 192.168.3.0 255.255.255.0 serial 0/0/0", "cmd": "ip route 192.168.3.0 255.255.255.0 serial 0/0/0", "desc": "Defines an access list that identifies the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Static", "title": "ip route 0.0.0.0 0.0.0.0 serial 0/0/1", "cmd": "ip route 0.0.0.0 0.0.0.0 serial 0/0/1", "desc": "Defines an access list that identifies the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 route 2001: db8:192:3::/64 2001:db8:192:1::1", "cmd": "ipv6 route 2001: db8:192:3::/64 2001:db8:192:1::1", "desc": "Defines an access list that identifies the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 route ::/0 2001:db8:192:1::2", "cmd": "ipv6 route ::/0 2001:db8:192:1::2", "desc": "Defines an access list that identifies the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat pool R1_POOL 209.165.201.8 209.165.201.15 netmask 255.255.255.2", "cmd": "ip nat pool R1_POOL 209.165.201.8 209.165.201.15 netmask 255.255.255.248", "desc": "Creates a pool of eight public addresses" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface gigabitethern et 0/0/0", "cmd": "interface gigabitethern et 0/0/0", "desc": "Enters GigabitEthernet 0/0/0 interface configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 209.165.201.2", "cmd": "ip address 209.165.201.2", "desc": "Defines which interface is the outside interface for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface gigabitethern et 0/0/1", "cmd": "interface gigabitethern et 0/0/1", "desc": "Configuring a NAT Virtual Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat enable", "cmd": "ip nat enable", "desc": "Allows the interface to participate in NVI translation" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "show ip nat nvi translations", "cmd": "show ip nat nvi translations", "desc": "IP Services" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "show ip nat nvi statistics", "cmd": "show ip nat nvi statistics", "desc": "Verifying NAT and PAT Configurations" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 1 priority 120", "cmd": "standby 1 priority 120", "desc": "Verifying NAT and PAT Configurations" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "show vrrp", "cmd": "show vrrp", "desc": "Verifying NAT and PAT Configurations" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 11 track 1 decrement 12", "cmd": "standby 11 track 1 decrement 12", "desc": "Verifying NAT and PAT Configurations" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 dhcp server STATELESS", "cmd": "ipv6 dhcp server STATELESS", "desc": "Verifying NAT and PAT Configurations" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 nd prefix", "cmd": "ipv6 nd prefix", "desc": "Verifying NAT and PAT Configurations" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "show access-list", "cmd": "show access-list", "desc": "Displays access lists" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "show ip nat translations", "cmd": "show ip nat translations", "desc": "Displays the translation" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "show ip nat statistics", "cmd": "show ip nat statistics", "desc": "Displays NAT statistics" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "clear ip nat translation", "cmd": "clear ip nat translation", "desc": "Clears a specific" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "clear ip nat translation *", "cmd": "clear ip nat translation *", "desc": "Troubleshooting NAT and PAT Configurations" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "debug ip nat", "cmd": "debug ip nat", "desc": "CAUTION: Using this command can potentially" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "debug ip nat detailed", "cmd": "debug ip nat detailed", "desc": "ISP Router" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "hostname Company", "cmd": "hostname Company", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "interface vlan30", "cmd": "interface vlan30", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "hostname Edmonton", "cmd": "hostname Edmonton", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "hostname Gibbons", "cmd": "hostname Gibbons", "desc": "Sets the host name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "enable secret cisco", "cmd": "enable secret cisco", "desc": "Sets the encrypted password to cisco" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "line console 0", "cmd": "line console 0", "desc": "Moves to line console mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "password cisco", "cmd": "password cisco", "desc": "Sets the console line password to class" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "password class", "cmd": "password class", "desc": "Sets the console line password to class" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Logging", "title": "logging synchronous", "cmd": "logging synchronous", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 198.133.219.2 255.255.255.252", "cmd": "ip address 198.133.219.2 255.255.255.252", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 198.133.219.1 255.255.255.252", "cmd": "ip address 198.133.219.1 255.255.255.252", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "standby 1 preempt", "cmd": "standby 1 preempt", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "standby 1 preempt delay minimum 180 reload 140", "cmd": "standby 1 preempt delay minimum 180 reload 140", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 1 timers 5 15", "cmd": "standby 1 timers 5 15", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 1 authentication text canada", "cmd": "standby 1 authentication text canada", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 172.16.100.5 255.255.255.0", "cmd": "ip address 172.16.100.5 255.255.255.0", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 address-family ipv4", "cmd": "vrrp 10 address-family ipv4", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 1 track 10 decrement 30", "cmd": "vrrp 1 track 10 decrement 30", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 1 ip 192.168.1.254", "cmd": "standby 1 ip 192.168.1.254", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 20 ip 192.168.20.254", "cmd": "standby 20 ip 192.168.20.254", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 30 ip 192.168.30.254", "cmd": "standby 30 ip 192.168.30.254", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip helperaddress 172.16.20.2", "cmd": "ip helperaddress 172.16.20.2", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "description LAN Interface", "cmd": "description LAN Interface", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "description Link to Gibbons Router", "cmd": "description Link to Gibbons Router", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "description Link to Edmonton Router", "cmd": "description Link to Edmonton Router", "desc": "Assigns the clock rate to the DCE cable on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 192.31.7.1 255.255.255.255", "cmd": "ip address 192.31.7.1 255.255.255.255", "desc": "Returns to privileged EXEC mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat", "cmd": "ip nat", "desc": "Creates NAT by combining list 1 with" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat source list 1 pool R1_POOL", "cmd": "ip nat source list 1 pool R1_POOL", "desc": "Enables translation of addresses" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ip nat source static 172.16.1.100 209.165.201.5", "cmd": "ip nat source static 172.16.1.100 209.165.201.5", "desc": "Permanently translates the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface fastethernet 1/0", "cmd": "interface fastethernet 1/0", "desc": "Moves to interface configuration mode on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 172.16.0.10", "cmd": "ip address 172.16.0.10", "desc": "Assigns IP address and netmask" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 1 ip 172.16.0.1", "cmd": "standby 1 ip 172.16.0.1", "desc": "Verifying HSRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 10 ip 192.168.10.254", "cmd": "standby 10 ip 192.168.10.254", "desc": "Verifying HSRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 ip 172.16.100.1", "cmd": "vrrp 10 ip 172.16.100.1", "desc": "Verifying HSRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show standby", "cmd": "show standby", "desc": "Displays HSRP information" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show standby brief", "cmd": "show standby brief", "desc": "Displays a single-line output summary of" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show standby vlan 1", "cmd": "show standby vlan 1", "desc": "Options are available that make it possible to optimize HSRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "no standby 1 preempt delay", "cmd": "no standby 1 preempt delay", "desc": "The default unit of time is seconds" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 1 timers msec 200 msec 600", "cmd": "standby 1 timers msec 200 msec 600", "desc": "IP Services" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "key chain MyHSRPChain", "cmd": "key chain MyHSRPChain", "desc": "IP Services" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 2 authentication md5 key-string england", "cmd": "standby 2 authentication md5 key-string england", "desc": "Configures england as the MD5" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 3 authentication md5 key-chain MyHSRPChain", "cmd": "standby 3 authentication md5 key-chain MyHSRPChain", "desc": "HSRP IP SLA Tracking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ip sla 10", "cmd": "ip sla 10", "desc": "Exits SLA configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ip sla schedule 10 start-time now life forever", "cmd": "ip sla schedule 10 start-time now life forever", "desc": "Configures the scheduling for SLA 10 to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ip sla schedule 10 start-time", "cmd": "ip sla schedule 10 start-time", "desc": "Configures the scheduling for SLA 10 to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ip sla schedule 11 life forever starttime now", "cmd": "ip sla schedule 11 life forever starttime now", "desc": "Configures the scheduling for SLA 10 to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "track 90 ip sla 10 state", "cmd": "track 90 ip sla 10 state", "desc": "SLA process 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 10 priority 110", "cmd": "standby 10 priority 110", "desc": "Assigns a priority value of 110 to standby" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "standby 10 preempt", "cmd": "standby 10 preempt", "desc": "HSRP Version 2 must be enabled on an interface before HSRP for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 10 track 90 decrement 20", "cmd": "standby 10 track 90 decrement 20", "desc": "HSRP Version 2 must be enabled on an interface before HSRP for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug standby", "cmd": "debug standby", "desc": "Displays HSRP error messages" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug standby errors", "cmd": "debug standby errors", "desc": "Displays HSRP error messages" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug standby events", "cmd": "debug standby events", "desc": "Displays HSRP event messages" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug standby events terse", "cmd": "debug standby events terse", "desc": "Displays all HSRP events except for hellos and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug standby events track", "cmd": "debug standby events track", "desc": "Displays all HSRP tracking events" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug standby packets", "cmd": "debug standby packets", "desc": "Displays HSRP packet messages" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug standby terse", "cmd": "debug standby terse", "desc": "VRRP supports using the real interface IP address as the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 description Engineering Group", "cmd": "vrrp 10 description Engineering Group", "desc": "Assigns a text description to the group" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 priority 110", "cmd": "vrrp 10 priority 110", "desc": "Sets the priority level for this VLAN. The" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 preempt", "cmd": "vrrp 10 preempt", "desc": "The preempt VRRP option is enabled by default" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 preempt delay minimum 60", "cmd": "vrrp 10 preempt delay minimum 60", "desc": "The default delay period is 0 seconds" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 timers advertise 15", "cmd": "vrrp 10 timers advertise 15", "desc": "The range of the advertisement timer is 1 to 255 seconds. If" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 timers learn", "cmd": "vrrp 10 timers learn", "desc": "Configures plain-text authentication for group" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 shutdown", "cmd": "vrrp 10 shutdown", "desc": "Configures plain-text authentication for group" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "no vrrp 10 shutdown", "cmd": "no vrrp 10 shutdown", "desc": "Configures plain-text authentication for group" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 authentication md5 key-string winnipeg", "cmd": "vrrp 10 authentication md5 key-string winnipeg", "desc": "Specifies an IPv4 address for the VRRP group" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "priority 150", "cmd": "priority 150", "desc": "Enables preemption of lower priority master" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "timers advertise 5000", "cmd": "timers advertise 5000", "desc": "Interface Tracking" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "track 10 interface gigabitethernet 1/0/1 line-protocol", "cmd": "track 10 interface gigabitethernet 1/0/1 line-protocol", "desc": "Displays VRRP information" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "show vrrp brief", "cmd": "show vrrp brief", "desc": "Displays a brief status of all VRRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "show vrrp 10", "cmd": "show vrrp 10", "desc": "VRRP group 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show vrrp interface vlan10", "cmd": "show vrrp interface vlan10", "desc": "Displays information about VRRPv2 as" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show vrrp interface vlan10 brief", "cmd": "show vrrp interface vlan10 brief", "desc": "Displays a brief summary about VRRPv2" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vrrp ipv4 vlan 10", "cmd": "show vrrp ipv4 vlan 10", "desc": "Displays information about VRRPv3 as" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vrrp brief vlan 10", "cmd": "show vrrp brief vlan 10", "desc": "Debugging VRRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "debug vrrp all", "cmd": "debug vrrp all", "desc": "Displays all VRRP messages" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "debug vrrp error", "cmd": "debug vrrp error", "desc": "Displays all VRRP error messages" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "debug vrrp events", "cmd": "debug vrrp events", "desc": "Displays all VRRP event messages" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "debug vrrp packet", "cmd": "debug vrrp packet", "desc": "Displays messages about packets sent and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "debug vrrp state", "cmd": "debug vrrp state", "desc": "IP Services" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 1 priority 105", "cmd": "standby 1 priority 105", "desc": "Assigns a priority value of 105 to standby group 1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 1 priority 100", "cmd": "standby 1 priority 100", "desc": "Assigns a priority value of 105 to standby group 1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 1 track gigabitethernet 1/0/1 20", "cmd": "standby 1 track gigabitethernet 1/0/1 20", "desc": "GigabitEthernet 1/0/1. If GigabitEthernet 1/0/1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 1 track gigabitethernet 1/0/2", "cmd": "standby 1 track gigabitethernet 1/0/2", "desc": "Activates HSRP group 10 on the interface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 10 track gigabitethernet 1/0/2", "cmd": "standby 10 track gigabitethernet 1/0/2", "desc": "Activates HSRP group 10 on the interface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 20 track gigabitethernet 1/0/2", "cmd": "standby 20 track gigabitethernet 1/0/2", "desc": "Activates HSRP group 10 on the interface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 30 track gigabitethernet 1/0/2", "cmd": "standby 30 track gigabitethernet 1/0/2", "desc": "Activates HSRP group 10 on the interface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 10", "cmd": "standby 10", "desc": "Assigns a priority value of 105 to standby group 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 10 priority 100", "cmd": "standby 10 priority 100", "desc": "Assigns a priority value of 105 to standby group 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 10 track gigabitethernet 1/0/1 20", "cmd": "standby 10 track gigabitethernet 1/0/1 20", "desc": "Assigns a priority value of 100 to standby group 20" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 20 track gigabitethernet 1/0/1 20", "cmd": "standby 20 track gigabitethernet 1/0/1 20", "desc": "Activates HSRP group 30 on the interface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 30 priority 100", "cmd": "standby 30 priority 100", "desc": "Assigns a priority value of 100 to standby group 30" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 30 priority 105", "cmd": "standby 30 priority 105", "desc": "Assigns a priority value of 100 to standby group 30" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 30 track gigabitethernet 1/0/1 20", "cmd": "standby 30 track gigabitethernet 1/0/1 20", "desc": "Assigns a priority value of 100 to standby group 1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 1", "cmd": "standby 1", "desc": "Activates HSRP group 20 on the interface and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 20 priority 105", "cmd": "standby 20 priority 105", "desc": "Assigns a priority value of 105 to standby group 20" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 20 preempt", "cmd": "standby 20 preempt", "desc": "Assigns a priority value of 105 to standby group 30" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 30 preempt", "cmd": "standby 30 preempt", "desc": "Exits SLA programming mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "standby 30 track gigabitethernet", "cmd": "standby 30 track gigabitethernet", "desc": "Exits SLA programming mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ip sla schedule 10 life forever start-time now", "cmd": "ip sla schedule 10 life forever start-time now", "desc": "Specifies the SLA start time and duration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "track 100", "cmd": "track 100", "desc": "Creates tracking object 100 calling SLA 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "track 2 interface gigabitethernet 0/0/2 line-protocol", "cmd": "track 2 interface gigabitethernet 0/0/2 line-protocol", "desc": "GigabitEthernet 0/0/0" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "ip address 10.1.11.2 255.255.255.0", "cmd": "ip address 10.1.11.2 255.255.255.0", "desc": "Assigns the physical interface address of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 11 ip 10.1.11.1", "cmd": "vrrp 11 ip 10.1.11.1", "desc": "Assigns the VRRP virtual IP address of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 ip 10.1.10.1", "cmd": "vrrp 10 ip 10.1.10.1", "desc": "Assigns the VRRP virtual IP address of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 11 authentication text CISCO123", "cmd": "vrrp 11 authentication text CISCO123", "desc": "Authentication by key chain is not available on some L3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 priority 105", "cmd": "vrrp 10 priority 105", "desc": "Authentication by key chain is not available on some L3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 11 priority 105", "cmd": "vrrp 11 priority 105", "desc": "Authentication by key chain is not available on some L3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 11 track 2", "cmd": "vrrp 11 track 2", "desc": "Enters interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "ip address 10.1.10.2 255.255.255.0", "cmd": "ip address 10.1.10.2 255.255.255.0", "desc": "Assigns group 10 virtual forwarder priority" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "ipv6 address 2001:0:0:6::2/64", "cmd": "ipv6 address 2001:0:0:6::2/64", "desc": "Assigns group 10 virtual forwarder priority" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "ipv6 address 2001:0:0:5::2/64", "cmd": "ipv6 address 2001:0:0:5::2/64", "desc": "Assigns group 10 virtual forwarder priority" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "ipv6 address 2001:0:0:3::1/64", "cmd": "ipv6 address 2001:0:0:3::1/64", "desc": "Assigns group 10 virtual forwarder priority" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 track 2", "cmd": "vrrp 10 track 2", "desc": "GigabitEthernet 0/0/2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp 10 track 100 decrement 6", "cmd": "vrrp 10 track 100 decrement 6", "desc": "Specifies SLA 10 start time and duration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "track 100 ip sla 10", "cmd": "track 100 ip sla 10", "desc": "HSRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "track 2 interface gigabitethernet 1/0/5 line-protocol", "cmd": "track 2 interface gigabitethernet 1/0/5 line-protocol", "desc": "Creates tracking object 2 to monitor line" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface gigabitethernet 1/0/5", "cmd": "interface gigabitethernet 1/0/5", "desc": "Changes GigabitEthernet 1/0/5 to a Layer" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 10.3.1.1 255.255.255.252", "cmd": "ip address 10.3.1.1 255.255.255.252", "desc": "Assigns IPv4 address 10.3.1.1/30" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport trunk allowed vlan 1,10", "cmd": "switchport trunk allowed vlan 1,10", "desc": "VLANs 1 and 10" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "switchport trunk allowed vlan 1,11", "cmd": "switchport trunk allowed vlan 1,11", "desc": "VLANs 1 and 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface gigabitethernet 1/0/7", "cmd": "interface gigabitethernet 1/0/7", "desc": "Enters switched virtual interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 10.1.10.3", "cmd": "ip address 10.1.10.3", "desc": "GigabitEthernet 1/0/5" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 10.1.11.3 255.255.255.0", "cmd": "ip address 10.1.11.3 255.255.255.0", "desc": "GigabitEthernet 1/0/5" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "interface vlan 11", "cmd": "interface vlan 11", "desc": "IPv6 Configuration Example: HSRPv2 on Router and L3 Switch" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "HA", "title": "vrrp", "cmd": "vrrp", "desc": "IPv6 Configuration Example: HSRPv2 on Router and L3 Switch" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ip sla 11", "cmd": "ip sla 11", "desc": "Defines the start and duration for SLA 11" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "track 111 ip sla 11", "cmd": "track 111 ip sla 11", "desc": "HSRPv2 is required for IPv6 implementation" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 11 ipv6 autoconfig", "cmd": "standby 11 ipv6 autoconfig", "desc": "The standby group ipv6 interface command can offer" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "standby 11 preempt", "cmd": "standby 11 preempt", "desc": "The same preempt command arguments are available" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 11 track gigabitethernet 0/0/2 12", "cmd": "standby 11 track gigabitethernet 0/0/2 12", "desc": "Selects HSRPv2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 10 ipv6 autoconfig", "cmd": "standby 10 ipv6 autoconfig", "desc": "Creates IPv6 HSRP virtual address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 10 priority 105", "cmd": "standby 10 priority 105", "desc": "Sets a priority of 105 for standby group 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 10 track 111 decrement 10", "cmd": "standby 10 track 111 decrement 10", "desc": "Sets a priority of 105 for standby group 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 11 priority 105", "cmd": "standby 11 priority 105", "desc": "Sets a priority of 105 for standby group 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby", "cmd": "standby", "desc": "Links tracking object 1 to this HSRP group" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 10 track 111 decrement 7", "cmd": "standby 10 track 111 decrement 7", "desc": "SLA 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "track 101 ip sla 11", "cmd": "track 101 ip sla 11", "desc": "Changes Layer 2 switch port to a Layer 3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 address 2001:0:0:1::1/64", "cmd": "ipv6 address 2001:0:0:1::1/64", "desc": "Permits traffic from VLANs 1 and 10 on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface gigabitfastethernet 0/7", "cmd": "interface gigabitfastethernet 0/7", "desc": "Specifies HSRPv2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 address 2001:0:0:5::3/64", "cmd": "ipv6 address 2001:0:0:5::3/64", "desc": "Enters interface configuration mode for VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 address 2001:0:0:6::3/64", "cmd": "ipv6 address 2001:0:0:6::3/64", "desc": "Sets a priority of 105 for standby group 11 on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "standby 11 track 111 decrement 10", "cmd": "standby 11 track 111 decrement 10", "desc": "DHCP is a network management protocol used on UDP/IP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ip dhcp pool INTERNAL", "cmd": "ip dhcp pool INTERNAL", "desc": "Creates a DHCP pool named INTERNAL. The" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "network 172.16.10.0 255.255.255.0", "cmd": "network 172.16.10.0 255.255.255.0", "desc": "Defines the domain name for the client" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "lease 14 12 23", "cmd": "lease 14 12 23", "desc": "The DHCP pool programming must also include any other required" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "lease infinite", "cmd": "lease infinite", "desc": "The DHCP pool programming must also include any other required" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ip dhcp pool POOL1", "cmd": "ip dhcp pool POOL1", "desc": "Specifies the gateway router" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "dns-server 192.168.22.11", "cmd": "dns-server 192.168.22.11", "desc": "Specifies the IP address of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "lease 1 0 0", "cmd": "lease 1 0 0", "desc": "TACACS service (port 49)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip helper- address 10.1.1.1", "cmd": "ip helper- address 10.1.1.1", "desc": "DHCP server at 10.1.1.1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "no ip forward- protocol udp 37", "cmd": "no ip forward- protocol udp 37", "desc": "UDP time services using port 37" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip forward- protocol udp 5858", "cmd": "ip forward- protocol udp 5858", "desc": "Enters GigabitEthernet 0/0 interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ip address dhcp", "cmd": "ip address dhcp", "desc": "Verifying and Troubleshooting DHCP Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show ip dhcp binding", "cmd": "show ip dhcp binding", "desc": "Displays a list of all bindings" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show ip dhcp", "cmd": "show ip dhcp", "desc": "Clears an automatic address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "clear ip dhcp binding *", "cmd": "clear ip dhcp binding *", "desc": "Clears all automatic DHCP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show ip dhcp conflict", "cmd": "show ip dhcp conflict", "desc": "Displays a list of all address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "clear ip dhcp", "cmd": "clear ip dhcp", "desc": "Clears an address conflict from" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "clear ip dhcp conflict *", "cmd": "clear ip dhcp conflict *", "desc": "Clears conflicts for all addresses" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show ip dhcp database", "cmd": "show ip dhcp database", "desc": "Displays information about DHCP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show ip dhcp pool name", "cmd": "show ip dhcp pool name", "desc": "DHCP pool named name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show ip dhcp interface", "cmd": "show ip dhcp interface", "desc": "Displays interface on which DHCP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show ip dhcp server statistics", "cmd": "show ip dhcp server statistics", "desc": "Displays a list of the number of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "clear ip dhcp server statistics", "cmd": "clear ip dhcp server statistics", "desc": "Resets all DHCP server counters" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "debug ip dhcp linkage | class}", "cmd": "debug ip dhcp linkage | class}", "desc": "Displays the DHCP process of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "debug ip dhcp server events", "cmd": "debug ip dhcp server events", "desc": "Enters global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "debug ip dhcp server packets", "cmd": "debug ip dhcp server packets", "desc": "Enters global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 dhcp pool STATELESS", "cmd": "ipv6 dhcp pool STATELESS", "desc": "DHCPv6 client" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 dhcp pool STATEFULDHCPv6", "cmd": "ipv6 dhcp pool STATEFULDHCPv6", "desc": "DHCPv6 client" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface interfaceid", "cmd": "interface interfaceid", "desc": "DHCPv6 client" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 address dhcp", "cmd": "ipv6 address dhcp", "desc": "DHCPv6 client" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "dns-server 2001:db8:3000:3000::42", "cmd": "dns-server 2001:db8:3000:3000::42", "desc": "Specifies an interface type and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 nd other-config-flag", "cmd": "ipv6 nd other-config-flag", "desc": "Leaves DHCPv6 configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 nd managedconfig-flag", "cmd": "ipv6 nd managedconfig-flag", "desc": "The no-autoconfig keyword sets the A flag" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 dhcp server STATEFUL-DHCPv6", "cmd": "ipv6 dhcp server STATEFUL-DHCPv6", "desc": "Enables the interface to acquire an IPv6" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 address dhcp rapid-commit", "cmd": "ipv6 address dhcp rapid-commit", "desc": "Verifying and Troubleshooting DHCPv6" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show ipv6 dhcp binding", "cmd": "show ipv6 dhcp binding", "desc": "Displays the IPv6 to MAC address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show ipv6 dhcp pool", "cmd": "show ipv6 dhcp pool", "desc": "Displays DHCPv6 pool statistics" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "show ipv6 dhcp interface", "cmd": "show ipv6 dhcp interface", "desc": "Displays interface on which DHCPv6" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "debug ipv6 dhcp", "cmd": "debug ipv6 dhcp", "desc": "Enables DHCPv6 debugging" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "debug ipv6 dhcp relay", "cmd": "debug ipv6 dhcp relay", "desc": "Sets the local description of the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 10.0.0.1 255.0.0.0", "cmd": "ip address 10.0.0.1 255.0.0.0", "desc": "Creates a static route to the destination network" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 192.168.1.2 255.255.255.252", "cmd": "ip address 192.168.1.2 255.255.255.252", "desc": "Creates a static route to the destination network" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip address 192.168.1.1 255.255.255.252", "cmd": "ip address 192.168.1.1 255.255.255.252", "desc": "Creates a static route to the destination network" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 enable", "cmd": "ipv6 enable", "desc": "Creates a static route to the destination network" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "service dhcp", "cmd": "service dhcp", "desc": "Verifies that the router can use DHCP services" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ip dhcp pool 10NETWORK", "cmd": "ip dhcp pool 10NETWORK", "desc": "Defines the domain name for clients" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "lease 12 14 30", "cmd": "lease 12 14 30", "desc": "Specifies the range of addresses not to be leased" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ip dhcp pool 192.168.3NETWORK", "cmd": "ip dhcp pool 192.168.3NETWORK", "desc": "Creates a DHCP pool called" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "network 192.168.3.0 255.255.255.0", "cmd": "network 192.168.3.0 255.255.255.0", "desc": "Assigns an IP address and netmask" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip helper-address 192.168.1.2", "cmd": "ip helper-address 192.168.1.2", "desc": "Enables IPv6 routing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 dhcp pool EDMONTONLAN", "cmd": "ipv6 dhcp pool EDMONTONLAN", "desc": "Edmonton LAN. Since this pool is used" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "dns-server 2001:db8:10:1::3", "cmd": "dns-server 2001:db8:10:1::3", "desc": "Exits the EDMONTONLAN pool" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 dhcp pool GIBBONSLAN", "cmd": "ipv6 dhcp pool GIBBONSLAN", "desc": "Enables IPv6 functions" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 address", "cmd": "ipv6 address", "desc": "Assigns an IPv6 address and prefix" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 address 2001:db8:192:1::2/64", "cmd": "ipv6 address 2001:db8:192:1::2/64", "desc": "Assigns an IPv6 address and prefix" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 address 2001:db8:192:3::1/64", "cmd": "ipv6 address 2001:db8:192:3::1/64", "desc": "Assigns an IPv6 address and prefix" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 address 2001:db8:192:1::1/64", "cmd": "ipv6 address 2001:db8:192:1::1/64", "desc": "Assigns an IPv6 address and prefix" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 address autoconfig default", "cmd": "ipv6 address autoconfig default", "desc": "Assigns an IPv6 address and prefix" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ipv6 nd other-configflag", "cmd": "ipv6 nd other-configflag", "desc": "Sets the Other Configuration flag to 1 for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 dhcp server EDMONTONLAN", "cmd": "ipv6 dhcp server EDMONTONLAN", "desc": "Assigns an IP address and prefix length" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 dhcp server GIBBONSLAN", "cmd": "ipv6 dhcp server GIBBONSLAN", "desc": "DLS-2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "ipv6 dhcp relay destination 2001:db8:192:1::2", "cmd": "ipv6 dhcp relay destination 2001:db8:192:1::2", "desc": "DLS-2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "enable password cisco", "cmd": "enable password cisco", "desc": "Sets the enable password. This password" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "enable secret class", "cmd": "enable secret class", "desc": "Sets the enable secret password. This" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "enable algorithm-type sha256 secret class", "cmd": "enable algorithm-type sha256 secret class", "desc": "Sets the enable secret password using the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "enable algorithm-type scrypt secret class", "cmd": "enable algorithm-type scrypt secret class", "desc": "Enters console line configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "password cisco12345", "cmd": "password cisco12345", "desc": "Sets the console line mode password to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "line vty 0 4", "cmd": "line vty 0 4", "desc": "Enters auxiliary line configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "line aux 0", "cmd": "line aux 0", "desc": "Enters auxiliary line configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "no exec", "cmd": "no exec", "desc": "Enters auxiliary line configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "password backdoor", "cmd": "password backdoor", "desc": "Cleartext Password Encryption" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "service password-encryption", "cmd": "service password-encryption", "desc": "Type 9: Specifies a scrypt hashed secret (SCRYPT)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "no service passwordencryption", "cmd": "no service passwordencryption", "desc": "Type 9: Specifies a scrypt hashed secret (SCRYPT)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "username demo5 secret cisco", "cmd": "username demo5 secret cisco", "desc": "Either option generates" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "username demo5 algorithm-type md5 secret cisco", "cmd": "username demo5 algorithm-type md5 secret cisco", "desc": "Generates password encrypted" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "username demo8 algorithm-type sha256 secret cisco", "cmd": "username demo8 algorithm-type sha256 secret cisco", "desc": "Generates password encrypted" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "username demo9 algorithm-type scrypt secret cisco", "cmd": "username demo9 algorithm-type scrypt secret cisco", "desc": "Verifying SSH" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "show ip ssh", "cmd": "show ip ssh", "desc": "Verifies that SSH is enabled" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "show ssh", "cmd": "show ssh", "desc": "CONFIGURING PASSWORDS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "boot system flash imagename", "cmd": "boot system flash imagename", "desc": "Loads the Cisco IOS Software with imagename" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "boot system rom", "cmd": "boot system rom", "desc": "Loads the Cisco IOS Software from ROM" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show file systems", "cmd": "show file systems", "desc": "Saves the running configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "copy runningconfig tftp", "cmd": "copy runningconfig tftp", "desc": "VIEWING THE CISCO IOS FILE SYSTEM" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "copy tftp runningconfig", "cmd": "copy tftp runningconfig", "desc": "SERVER" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "copy flash: tftp:", "cmd": "copy flash: tftp:", "desc": "SERVER" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "copy tftp: flash:", "cmd": "copy tftp: flash:", "desc": "Moves to global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa authentication login default local", "cmd": "aaa authentication login default local", "desc": "Enables the AAA access control system. In" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa authorization exec default local", "cmd": "aaa authorization exec default local", "desc": "Sets parameters that restrict user access to a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "username superuser privilege 15 secret superpassword", "cmd": "username superuser privilege 15 secret superpassword", "desc": "Creates a local username/password" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "ip scp server enable", "cmd": "ip scp server enable", "desc": "Verifying and Troubleshooting SCP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "show runningconfig", "cmd": "show runningconfig", "desc": "SCP server is enabled and visible in the running" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug ip scp", "cmd": "debug ip scp", "desc": "The following example shows the commands for using SCP to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "copy flash: scp:", "cmd": "copy flash: scp:", "desc": "FROM A TFTP SERVER" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "copy flash:isr4300-universalk9.16.09.04.SPA.bin scp://superuser@192.16", "cmd": "copy flash:isr4300-universalk9.16.09.04.SPA.bin scp://superuser@192.168.119.20/", "desc": "DNS name resolution" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "no ip domain lookup", "cmd": "no ip domain lookup", "desc": "Cisco Discovery Protocol" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "no cdp run", "cmd": "no cdp run", "desc": "CDP (on a specific interface)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "no cdp enable", "cmd": "no cdp enable", "desc": "Network Time Protocol (NTP)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NTP", "title": "ntp", "cmd": "ntp", "desc": "BOOTP server" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "System", "title": "no ip bootp server", "cmd": "no ip bootp server", "desc": "FROM A TFTP SERVER" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "no service dhcp", "cmd": "no service dhcp", "desc": "Protocol (ARP)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "no ip proxy-arp", "cmd": "no ip proxy-arp", "desc": "IP source routing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "no ip source-route", "cmd": "no ip source-route", "desc": "IP redirects" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "no ip redirects", "cmd": "no ip redirects", "desc": "HTTP service" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "no ip http server", "cmd": "no ip http server", "desc": "HTTPS service" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "no ip http secure-server", "cmd": "no ip http secure-server", "desc": "The following commands are useful options available when using" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ip ftp sourceinterface", "cmd": "ip ftp sourceinterface", "desc": "Sets the base HTTP path for HTML files" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "DHCP", "title": "ip http maxconnections 10", "cmd": "ip http maxconnections 10", "desc": "DHCP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "ip access-group 1 in", "cmd": "ip access-group 1 in", "desc": "Applies ACL 1 on the interface as an" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "ip access-group MyFilter in", "cmd": "ip access-group MyFilter in", "desc": "Applies ACL 1 on the interface as an" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "ip access-group 120 in", "cmd": "ip access-group 120 in", "desc": "Applies ACL 1 on the interface as an" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "ip access-group MyExtFilter in", "cmd": "ip access-group MyExtFilter in", "desc": "Applies ACL 1 on the interface as an" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "ip access-group 1 out", "cmd": "ip access-group 1 out", "desc": "Named Standard IPv4 ACL" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ip access-list standard MyFilter", "cmd": "ip access-list standard MyFilter", "desc": "Applies ACL MyFilter on the interface as" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "ip access-group MyFilter out", "cmd": "ip access-group MyFilter out", "desc": "Infrastructure Security" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "no ip access-list standard MyFilter", "cmd": "no ip access-list standard MyFilter", "desc": "Infrastructure Security" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 120 permit tcp 192.168.1.0 0.0.0.255 any eq www", "cmd": "access-list 120 permit tcp 192.168.1.0 0.0.0.255 any eq www", "desc": "Permits HTTP traffic that matches any source" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 120 permit udp 192.168.1.0 0.0.0.255 any eq domain", "cmd": "access-list 120 permit udp 192.168.1.0 0.0.0.255 any eq domain", "desc": "Permits DNS traffic that matches any source" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 120", "cmd": "access-list 120", "desc": "Permits all IPv4 traffic that matches any" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 120 deny tcp any host 209.165.201.1 eq ftp", "cmd": "access-list 120 deny tcp any host 209.165.201.1 eq ftp", "desc": "Denies FTP traffic that matches any source" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 120 permit tcp any eq 443 10.0.0.0 0.0.0.255 established", "cmd": "access-list 120 permit tcp any eq 443 10.0.0.0 0.0.0.255 established", "desc": "Permits HTTPS replies from any source to any" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "no access-list 120", "cmd": "no access-list 120", "desc": "Applies ACL 120 on the interface as an" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ip access-group 120 out", "cmd": "ip access-group 120 out", "desc": "Named Extended IPv4 ACL" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ip access-list extended MyExtFilter", "cmd": "ip access-list extended MyExtFilter", "desc": "Applies ACL MyExtFilter on the interface as" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "no ip access-list extended MyExtFilter", "cmd": "no ip access-list extended MyExtFilter", "desc": "It is also possible to use the following with" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ip accesslist extended MyTimeACL", "cmd": "ip accesslist extended MyTimeACL", "desc": "Enters interface configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ip access-group MyTimedACL out", "cmd": "ip access-group MyTimedACL out", "desc": "Permits any traffic with a source" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ipv6 access-list v6Filter", "cmd": "ipv6 access-list v6Filter", "desc": "Enters GigabitEthernet 0/0/0 interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ipv6 traffic-filter v6Filter in", "cmd": "ipv6 traffic-filter v6Filter in", "desc": "Applies the IPv6 access list named v6Filter" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "no ipv6 access-list v6Filter", "cmd": "no ipv6 access-list v6Filter", "desc": "It is important to understand that any explicit deny ipv6 any any" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "show ip interface interfacetype interface-number", "cmd": "show ip interface interfacetype interface-number", "desc": "Displays the contents of all ACLs on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "show ipv6 interface interfacetype interface-number", "cmd": "show ipv6 interface interfacetype interface-number", "desc": "Displays the contents of all ACLs on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "show accesslists", "cmd": "show accesslists", "desc": "Displays the contents of all ACLs on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "show ip accesslists", "cmd": "show ip accesslists", "desc": "Displays the contents of all IPv4 ACLs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "show ipv6 access-lists", "cmd": "show ipv6 access-lists", "desc": "Displays the contents of all IPv6 ACLs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "show accesslists 1", "cmd": "show accesslists 1", "desc": "Creates an entry in the local database with a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "login local", "cmd": "login local", "desc": "AAA-based Local Database Authentication" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "username ADMIN privilege 15 secret cisco123", "cmd": "username ADMIN privilege 15 secret cisco123", "desc": "Enables AAA access control mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa authentication login default localcase enable", "cmd": "aaa authentication login default localcase enable", "desc": "Enters the vty line configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "radius-server host 192.168.55.12 auth-port 1812 acct-port 1813 key S3C", "cmd": "radius-server host 192.168.55.12 auth-port 1812 acct-port 1813 key S3CR3TKEY", "desc": "Enters the vty line configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "radius server RADSRV", "cmd": "radius server RADSRV", "desc": "Enters the vty line configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa authentication login TACSRV group tacacs+ local", "cmd": "aaa authentication login TACSRV group tacacs+ local", "desc": "Enters the vty line configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "tacacs server TACSRV", "cmd": "tacacs server TACSRV", "desc": "Enters the vty line configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "login authentication VTY-Lines", "cmd": "login authentication VTY-Lines", "desc": "Enters Console 0 configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "login authentication default", "cmd": "login authentication default", "desc": "RADIUS Authentication" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "username admin secret cisco", "cmd": "username admin secret cisco", "desc": "Specifies a RADIUS server at 192.168.55.12" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa authentication login default group radius local line", "cmd": "aaa authentication login default group radius local line", "desc": "Specifies the AAA service to use the default" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "password S3cr3Tw0Rd", "cmd": "password S3cr3Tw0Rd", "desc": "Moves to console 0 configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "login authentication NO_AUTH", "cmd": "login authentication NO_AUTH", "desc": "Configures the IPv4 address for the RADIUS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "login authentication", "cmd": "login authentication", "desc": "Configures the IPv4 address for the RADIUS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "key C1sc0", "cmd": "key C1sc0", "desc": "Returns to global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "ip radius sourceinterface gigabitethernet 0/0/0", "cmd": "ip radius sourceinterface gigabitethernet 0/0/0", "desc": "Forces RADIUS to use the IP address of a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa authentication login RAD_LIST group RADSRVGRP local", "cmd": "aaa authentication login RAD_LIST group RADSRVGRP local", "desc": "Forces RADIUS to use the IP address of a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa group server tacacs+ TACSRVGRP", "cmd": "aaa group server tacacs+ TACSRVGRP", "desc": "Forces RADIUS to use the IP address of a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "server name TACSRV", "cmd": "server name TACSRV", "desc": "Forces RADIUS to use the IP address of a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa authentication login TAC_LIST group TACSRVGRP local", "cmd": "aaa authentication login TAC_LIST group TACSRVGRP local", "desc": "Forces RADIUS to use the IP address of a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa group server radius RADSRVGRP", "cmd": "aaa group server radius RADSRVGRP", "desc": "IPV6 ACLS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "server name RADSRV", "cmd": "server name RADSRV", "desc": "Moves to vty line configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "authentication RAD_LIST", "cmd": "authentication RAD_LIST", "desc": "After AAA has been enabled on a Cisco IOS device and AAA" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "login authentication TAC_LIST", "cmd": "login authentication TAC_LIST", "desc": "After AAA has been enabled on a Cisco IOS device and AAA" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa authorization exec default group radius group tacacs+ local", "cmd": "aaa authorization exec default group radius group tacacs+ local", "desc": "Configuring accounting is also a two-step process. First define a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "aaa accounting exec default start-stop group radius", "cmd": "aaa accounting exec default start-stop group radius", "desc": "Troubleshooting AAA" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "debug aaa authentication", "cmd": "debug aaa authentication", "desc": "Enables debugging of the AAA" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "debug aaa authorization", "cmd": "debug aaa authorization", "desc": "RADSRVGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "debug aaa accounting", "cmd": "debug aaa accounting", "desc": "RADSRVGRP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ip access-list extended copp-routing-acl", "cmd": "ip access-list extended copp-routing-acl", "desc": "Exits named ACL" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ip access-list extended copp-management-acl", "cmd": "ip access-list extended copp-management-acl", "desc": "Step 2: Define Class Maps for Matched Traffic" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "ip access-list extended copp-icmp-acl", "cmd": "ip access-list extended copp-icmp-acl", "desc": "Step 2: Define Class Maps for Matched Traffic" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "class-map match-all copp-routing-map", "cmd": "class-map match-all copp-routing-map", "desc": "Creates a class map called copprouting-map" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "match access-group name copprouting-acl", "cmd": "match access-group name copprouting-acl", "desc": "Creates a class map called coppmanagement-map" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "match access-group name coppmanagement-acl", "cmd": "match access-group name coppmanagement-acl", "desc": "Creates a class map called coppicmp-map" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "match access-group name copp-icmpacl", "cmd": "match access-group name copp-icmpacl", "desc": "Step 3: Define a Policy Map to Police Matched Traffic" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "policy-map copp-policy", "cmd": "policy-map copp-policy", "desc": "Creates a CoPP policy called copppolicy" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "class copp-routing-map", "cmd": "class copp-routing-map", "desc": "Assigns the CoPP routing class map" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "police 1000000 conformaction transmit exceedaction drop", "cmd": "police 1000000 conformaction transmit exceedaction drop", "desc": "Polices up to 1 Mbps any routing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "class coppmanagement-map", "cmd": "class coppmanagement-map", "desc": "Assigns the CoPP management class" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "police 100000 conformaction transmit exceedaction drop", "cmd": "police 100000 conformaction transmit exceedaction drop", "desc": "Polices up to 100 Kbps any" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "class copp-icmpmap", "cmd": "class copp-icmpmap", "desc": "Assigns the CoPP ICMP class map to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "police 50000 conformaction transmit exceedaction drop", "cmd": "police 50000 conformaction transmit exceedaction drop", "desc": "Polices up to 50 Kbps any ICMP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "class classdefault", "cmd": "class classdefault", "desc": "Assigns the CoPP default class map" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "police 8000 conform-action transmit exceed-action drop", "cmd": "police 8000 conform-action transmit exceed-action drop", "desc": "Step 4: Assign a Policy Map to the Control Plane" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "control-plane", "cmd": "control-plane", "desc": "Displays all configured ACLs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "show class-map", "cmd": "show class-map", "desc": "Displays all configured class maps" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "show policy-map", "cmd": "show policy-map", "desc": "Displays all configured policy maps" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "show policy-map controlplane", "cmd": "show policy-map controlplane", "desc": "Moves to interface configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "ip verify unicast source reachable-via rx", "cmd": "ip verify unicast source reachable-via rx", "desc": "Enables uRPF strict mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "ip verify unicast source reachable-via any", "cmd": "ip verify unicast source reachable-via any", "desc": "Enables uRPF loose mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "ip verify unicast source reachable-via rx 120", "cmd": "ip verify unicast source reachable-via rx 120", "desc": "ACL applied to bypass the drop" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "ip verify unicast source reachable-via", "cmd": "ip verify unicast source reachable-via", "desc": "Verifying and Troubleshooting uRPF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "debug ip cef drops rpf", "cmd": "debug ip cef drops rpf", "desc": "Displays information about dropped" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "show ip traffic", "cmd": "show ip traffic", "desc": "Displays information about uRPF drops" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Security", "title": "show cef interface", "cmd": "show cef interface", "desc": "CONTROL PLANE POLICING (COPP)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ip redirects", "cmd": "ip redirects", "desc": "Network Assurance" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ping w.x.y.z", "cmd": "ping w.x.y.z", "desc": "Checks for Layer 3 connectivity with the device" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "ping aaaa:aaaa: aaaa:aaaa:aaaa:aaa a: aaaa:aaaa", "cmd": "ping aaaa:aaaa: aaaa:aaaa:aaaa:aaa a: aaaa:aaaa", "desc": "THE PING COMMAND" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ping 172.16.20.1 source loopback 1", "cmd": "ping 172.16.20.1 source loopback 1", "desc": "THE PING COMMAND" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ping 2001::1 source loopback 1", "cmd": "ping 2001::1 source loopback 1", "desc": "THE PING COMMAND" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ping 172.16.20.1", "cmd": "ping 172.16.20.1", "desc": "Performs a basic Layer 3 test to IPv4" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ping paris", "cmd": "ping paris", "desc": "Same as above but through the IP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ping 2001:db8:d1a5:c900::2", "cmd": "ping 2001:db8:d1a5:c900::2", "desc": "The traceroute command (or tracert in Microsoft Windows) is a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "traceroute paris", "cmd": "traceroute paris", "desc": "Shows command with IP host name rather" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "traceroute 2001:db8:d1a5:c900:: 2", "cmd": "traceroute 2001:db8:d1a5:c900:: 2", "desc": "PING COMMANDS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug condition interface interface-type interface number", "cmd": "debug condition interface interface-type interface number", "desc": "Filters output on the basis" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug condition ip", "cmd": "debug condition ip", "desc": "Filters messages on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug condition macaddress", "cmd": "debug condition macaddress", "desc": "Filters messages on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug condition vlan", "cmd": "debug condition vlan", "desc": "Filters messages on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show debug condition", "cmd": "show debug condition", "desc": "Filters messages on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug condition username", "cmd": "debug condition username", "desc": "Simple Network Management Protocol (SNMP) is the most" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "no snmp-server", "cmd": "no snmp-server", "desc": "Securing SNMPv3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 99 permit 10.1.1.0 0.0.0.255", "cmd": "access-list 99 permit 10.1.1.0 0.0.0.255", "desc": "SNMP access to the local device from SNMP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server view MGMT sysUpTime included", "cmd": "snmp-server view MGMT sysUpTime included", "desc": "Defines an SNMP view named MGMT to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server view MGMT ifDescr included", "cmd": "snmp-server view MGMT ifDescr included", "desc": "OID name of ifAdminStatus. This OID is" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server view MGMT ifAdminStatus included", "cmd": "snmp-server view MGMT ifAdminStatus included", "desc": "OID name of ifAdminStatus. This OID is" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server view MGMT ifOperStatus included", "cmd": "snmp-server view MGMT ifOperStatus included", "desc": "SNMPv3 group groupAAA with" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server enable traps", "cmd": "snmp-server enable traps", "desc": "Enables SNMP traps" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server host 10.1.1.50 traps version 3 priv userAAA cpu portsecuri", "cmd": "snmp-server host 10.1.1.50 traps version 3 priv userAAA cpu portsecurity", "desc": "Defines a receiving manager for traps at IP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server ifindex persist", "cmd": "snmp-server ifindex persist", "desc": "Verifying SNMP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "show snmp", "cmd": "show snmp", "desc": "Provides basic information about SNMP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "show snmp view", "cmd": "show snmp view", "desc": "Provides information about SNMP views" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "show snmp group", "cmd": "show snmp group", "desc": "SNMP groups" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "SNMP", "title": "show snmp user", "cmd": "show snmp user", "desc": "It is important for network administrators to implement logging to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Logging", "title": "logging on", "cmd": "logging on", "desc": "Syslog Message Example" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ip flow ingress", "cmd": "ip flow ingress", "desc": "Enables NetFlow on the interface. Captures" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ip flow egress", "cmd": "ip flow egress", "desc": "Returns to global configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ip flow-export", "cmd": "ip flow-export", "desc": "Flexible NetFlow improves on original NetFlow by adding the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "flow record R1FLOW-RECORD", "cmd": "flow record R1FLOW-RECORD", "desc": "CONDITIONALLY TRIGGERED DEBUGS" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "match ipv4 source address", "cmd": "match ipv4 source address", "desc": "Includes the source IPv4" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "match ipv4 destination address", "cmd": "match ipv4 destination address", "desc": "Step 2: Configure a Flow Exporter" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "flow exporter R1FLOW-EXPORTER", "cmd": "flow exporter R1FLOW-EXPORTER", "desc": "Step 3: Configure a Flow Monitor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "flow monitor R1FLOW-MONITOR", "cmd": "flow monitor R1FLOW-MONITOR", "desc": "Step 4: Apply the Flow Monitor to an Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ip flow monitor R1-FLOW-MONITOR input", "cmd": "ip flow monitor R1-FLOW-MONITOR input", "desc": "R1-FLOW-RECORD" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip interface gigabitethernet 0/0/0", "cmd": "show ip interface gigabitethernet 0/0/0", "desc": "Verifies status and statistics for NetFlow" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip flow export", "cmd": "show ip flow export", "desc": "Verifies status and statistics for NetFlow" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip cache flow", "cmd": "show ip cache flow", "desc": "Displays a summary of NetFlow statistics" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show flow monitor", "cmd": "show flow monitor", "desc": "NetFlow configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show flow exporter", "cmd": "show flow exporter", "desc": "NetFlow exporter configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show flow record", "cmd": "show flow record", "desc": "Configuration Example: Local SPAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "no monitor session 1", "cmd": "no monitor session 1", "desc": "Removes any existing SPAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "no monitor session all", "cmd": "no monitor session all", "desc": "Removes all SPAN sessions" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "no monitor session local", "cmd": "no monitor session local", "desc": "Removes all local SPAN sessions" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "no monitor session remote", "cmd": "no monitor session remote", "desc": "Removes all remote SPAN sessions" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "monitor session 1 source interface gigabitethernet 0/1", "cmd": "monitor session 1 source interface gigabitethernet 0/1", "desc": "Sets a new SPAN session where the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "monitor session 2 source gigabitethernet 0/2 rx", "cmd": "monitor session 2 source gigabitethernet 0/2 rx", "desc": "Configures session 2 to monitor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "monitor session 2 destination interface gigabitethernet 0/24 encapsula", "cmd": "monitor session 2 destination interface gigabitethernet 0/24 encapsulation", "desc": "Configures session 2 to monitor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "monitor", "cmd": "monitor", "desc": "You can use the monitor session" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "monitor session 1 filter vlan 6 10", "cmd": "monitor session 1 filter vlan 6 10", "desc": "VLANs 6 to 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "monitor session session_number", "cmd": "monitor session session_number", "desc": "Options for this command include" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "monitor session 1 destination interface gigabitethernet 0/24 encapsula", "cmd": "monitor session 1 destination interface gigabitethernet 0/24 encapsulation replicate", "desc": "Configuration Example: Remote SPAN" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "vlan 901", "cmd": "vlan 901", "desc": "VERIFYING NETFLOW" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "monitor session 1 source interface gigabitethernet 0/1 tx", "cmd": "monitor session 1 source interface gigabitethernet 0/1 tx", "desc": "Configures session 1 to monitor" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "monitor session 1 source remote vlan 901", "cmd": "monitor session 1 source remote vlan 901", "desc": "Configures session 1 to monitor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "monitor session 1 source interface gigabitethernet 0/2 rx", "cmd": "monitor session 1 source interface gigabitethernet 0/2 rx", "desc": "Configures session 1 to have a" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "monitor session 1 destination remote vlan 901", "cmd": "monitor session 1 destination remote vlan 901", "desc": "Configures session 1 to have a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "monitor session 1 destination interface gigabitethernet 0/24", "cmd": "monitor session 1 destination interface gigabitethernet 0/24", "desc": "ERSPAN Source Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "monitor session 1 type erspansource", "cmd": "monitor session 1 type erspansource", "desc": "Assigns an ERSPAN ID of 1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ip address 2.2.2.2", "cmd": "ip address 2.2.2.2", "desc": "ERSPAN Destination Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "monitor session 1 type erspandestination", "cmd": "monitor session 1 type erspandestination", "desc": "Verifying and Troubleshooting Local and Remote SPAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show monitor session 1", "cmd": "show monitor session 1", "desc": "On some platforms the command is show monitor" }, { "os": "ios", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "show vlan remote-span", "cmd": "show vlan remote-span", "desc": "Displays information about VLANs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug", "cmd": "debug", "desc": "Displays all SPAN debugging messages" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug monitor list", "cmd": "debug monitor list", "desc": "Displays SPAN port and VLAN list tracing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug monitor requests", "cmd": "debug monitor requests", "desc": "Most networks today are being designed with high performance" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp server 209.165.200.254", "cmd": "ntp server 209.165.200.254", "desc": "Configures an IOS device to synchronize its" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp peer 172.16.21.1 source loopback 0", "cmd": "ntp peer 172.16.21.1 source loopback 0", "desc": "Makes this peer the preferred peer that" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp peer 172.16.21.1 source loopback 0 prefer", "cmd": "ntp peer 172.16.21.1 source loopback 0 prefer", "desc": "You can secure NTP operation using authentication and access" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp authenticationkey 1 md5 NTPpa55word", "cmd": "ntp authenticationkey 1 md5 NTPpa55word", "desc": "Verifying and Troubleshooting NTP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show ntp associations", "cmd": "show ntp associations", "desc": "Displays the status of NTP associations" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show ntp status", "cmd": "show ntp status", "desc": "Displays the status of the NTP configuration. This" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug ip packets", "cmd": "debug ip packets", "desc": "Checks to see whether NTP packets are received and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug ip packet 1", "cmd": "debug ip packet 1", "desc": "Limits debug output to ACL 1" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug ntp adjust", "cmd": "debug ntp adjust", "desc": "Displays debug output for NTP clock adjustments" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug ntp all", "cmd": "debug ntp all", "desc": "Displays all NTP debugging output" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug ntp events", "cmd": "debug ntp events", "desc": "Displays all NTP debugging events" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug ntp packet", "cmd": "debug ntp packet", "desc": "Displays detailed NTP packet dump" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug ntp packet detail", "cmd": "debug ntp packet detail", "desc": "Displays detailed NTP packet dump" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug ntp", "cmd": "debug ntp", "desc": "Manually sets the system hardware" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show calendar", "cmd": "show calendar", "desc": "Updates the hardware clock from the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show clock detail", "cmd": "show clock detail", "desc": "Using Time Stamps" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "service timestamps", "cmd": "service timestamps", "desc": "Adds a time stamp to all system" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "service timestamps debug", "cmd": "service timestamps debug", "desc": "Adds a time stamp to all debugging" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "service timestamps debug uptime", "cmd": "service timestamps debug uptime", "desc": "Adds a time stamp along with the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "service timestamps debug datetime localtime", "cmd": "service timestamps debug datetime localtime", "desc": "Adds a time stamp displaying the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "no service timestamps", "cmd": "no service timestamps", "desc": "Core1 Router" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp server 209.165.201.44", "cmd": "ntp server 209.165.201.44", "desc": "Configures router to synchronize its" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp server 209.165.201.111", "cmd": "ntp server 209.165.201.111", "desc": "Configures the system to automatically" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp server 209.165.201.222", "cmd": "ntp server 209.165.201.222", "desc": "Configures the system to automatically" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp server 209.165.201.233 prefer", "cmd": "ntp server 209.165.201.233 prefer", "desc": "Configures the system to automatically" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp maxassociations 200", "cmd": "ntp maxassociations 200", "desc": "Configures the system to automatically" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp server 209.165.201.133", "cmd": "ntp server 209.165.201.133", "desc": "Configures the system to automatically" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp master 10", "cmd": "ntp master 10", "desc": "Configures the router to serve as a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp source Loopback 0", "cmd": "ntp source Loopback 0", "desc": "Sets access list 2 to permit packets" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp access-group peer 1", "cmd": "ntp access-group peer 1", "desc": "Configures Core1 to peer with any" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp access-group serve-only 2", "cmd": "ntp access-group serve-only 2", "desc": "Sets the source of all NTP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp server 192.168.223.1", "cmd": "ntp server 192.168.223.1", "desc": "Configures DLSwitch1 to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "ntp server 192.168.224.1", "cmd": "ntp server 192.168.224.1", "desc": "Using an EEM applet to call Tcl scripts is another very powerful" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "event manager run myping", "cmd": "event manager run myping", "desc": "Verifying EEM" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "debug event manager action cli", "cmd": "debug event manager action cli", "desc": "Displays actual actions taking place" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show event manager policy registered", "cmd": "show event manager policy registered", "desc": "VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VLAN", "title": "show event manager version", "cmd": "show event manager version", "desc": "VLAN" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "AAA > RADIUS > Authentication and enter the", "cmd": "AAA > RADIUS > Authentication and enter the", "desc": "Wireless Security and Troubleshooting" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "AAA", "title": "AAA > RADIUS >", "cmd": "AAA > RADIUS >", "desc": "Displays a summary of clients associated with" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Wireless", "title": "show wireless client summary", "cmd": "show wireless client summary", "desc": "Displays client information learned through" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Wireless", "title": "show wireless client mac-address macaddress detail", "cmd": "show wireless client mac-address macaddress detail", "desc": "Wireless Security and Troubleshooting" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Wireless", "title": "show wireless client ap name ap-name dot11 {24ghz | 5ghz}", "cmd": "show wireless client ap name ap-name dot11 {24ghz | 5ghz}", "desc": "Wireless Security and Troubleshooting" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Wireless", "title": "show ap dot11 {24ghz | 5ghz} network", "cmd": "show ap dot11 {24ghz | 5ghz} network", "desc": "Displays AP detailed configuration settings by" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Wireless", "title": "show ap dot11 {24ghz | 5ghz} summary", "cmd": "show ap dot11 {24ghz | 5ghz} summary", "desc": "Displays general AP configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Wireless", "title": "show ap name ap-name config general", "cmd": "show ap name ap-name config general", "desc": "Wireless Security and Troubleshooting" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Wireless", "title": "show ap macaddress mac-", "cmd": "show ap macaddress mac-", "desc": "Wireless Security and Troubleshooting" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Wireless", "title": "show ap join stats summary", "cmd": "show ap join stats summary", "desc": "Wireless Security and Troubleshooting" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Wireless", "title": "show ap name ap-name wlan dot11 {24ghz | 5ghz }", "cmd": "show ap name ap-name wlan dot11 {24ghz | 5ghz }", "desc": "Wireless Security and Troubleshooting" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "interface tunnel 0", "cmd": "interface tunnel 0", "desc": "Configuring an IPv6 GRE Tunnel" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "interface tunnel 1", "cmd": "interface tunnel 1", "desc": "Moves to interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "tunnel mode gre ipv6", "cmd": "tunnel mode gre ipv6", "desc": "Specifies the encapsulation protocol to be used in the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip address 2001:db8:192:1 00::1/64", "cmd": "ip address 2001:db8:192:1 00::1/64", "desc": "Assigns an IPv6 address and subnet mask to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "tunnel source 2001:db8:209:2 01::1", "cmd": "tunnel source 2001:db8:209:2 01::1", "desc": "Overlay Tunnels and VRF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "tunnel source gigabitetherne t 0/0/0", "cmd": "tunnel source gigabitetherne t 0/0/0", "desc": "The tunnel source can be a physical interface or a loopback interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "tunnel destination 2001:db8:198:5 1::1", "cmd": "tunnel destination 2001:db8:198:5 1::1", "desc": "Identifies the remote destination IPv6 address" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "bandwidth 4096", "cmd": "bandwidth 4096", "desc": "Sets the tunnel keepalives to 3 seconds and the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ipv6 mtu 1400", "cmd": "ipv6 mtu 1400", "desc": "Verifying IPv4 and IPv6 GRE Tunnels" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "show interfaces tunnel number", "cmd": "show interfaces tunnel number", "desc": "Displays IPv4 information about" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "show ip interface tunnel number", "cmd": "show ip interface tunnel number", "desc": "Displays IPv4 information about" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "show ipv6 interface tunnel number", "cmd": "show ipv6 interface tunnel number", "desc": "Configuration Example: IPv4 and IPv6 GRE Tunnels with OSPFv3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip address 209.165.201.1 255.255.255.252", "cmd": "ip address 209.165.201.1 255.255.255.252", "desc": "Applies an IPv4 address to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip address 10.1.1.1 255.255.255.0", "cmd": "ip address 10.1.1.1 255.255.255.0", "desc": "Applies an IPv4 address to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip address 198.51.100.1 255.255.255.252", "cmd": "ip address 198.51.100.1 255.255.255.252", "desc": "Applies an IPv4 address to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip address", "cmd": "ip address", "desc": "Applies an IPv4 address to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ipv6 address 2001:db8:209:201::1/64", "cmd": "ipv6 address 2001:db8:209:201::1/64", "desc": "Applies an IPv6 address to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ipv6 address 2001:db8:10:1::1/64", "cmd": "ipv6 address 2001:db8:10:1::1/64", "desc": "Applies an IPv6 address to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ipv6 address 2001:db8:198:51::1/64", "cmd": "ipv6 address 2001:db8:198:51::1/64", "desc": "Applies an IPv6 address to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ipv6 address 2001:db8:10:2::1/64", "cmd": "ipv6 address 2001:db8:10:2::1/64", "desc": "Applies an IPv6 address to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip route 0.0.0.0 0.0.0.0 209.165.201.2", "cmd": "ip route 0.0.0.0 0.0.0.0 209.165.201.2", "desc": "Defines an IPv4 default route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip route 0.0.0.0 0.0.0.0 198.51.100.2", "cmd": "ip route 0.0.0.0 0.0.0.0 198.51.100.2", "desc": "Defines an IPv4 default route" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ipv6 route ::/0 2001:db8:209:201::2", "cmd": "ipv6 route ::/0 2001:db8:209:201::2", "desc": "Enters interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ipv6 route ::/0 2001:db8:198:51::2", "cmd": "ipv6 route ::/0 2001:db8:198:51::2", "desc": "Enters interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ipv6 address 2001:db8:192:100::1 /64", "cmd": "ipv6 address 2001:db8:192:100::1 /64", "desc": "Applies an IPv4 address to the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ipv6 address 2001:db8:192:100::2 /64", "cmd": "ipv6 address 2001:db8:192:100::2 /64", "desc": "Applies an IPv4 address to the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "crypto map GREMAP", "cmd": "crypto map GREMAP", "desc": "Applies an IPv4 address to the interface" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "tunnel protection ipsec profile GRE-PROFILE", "cmd": "tunnel protection ipsec profile GRE-PROFILE", "desc": "Applies an IPv4 address to the interface" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "tunnel mode ipsec ipv4", "cmd": "tunnel mode ipsec ipv4", "desc": "Applies an IPv4 address to the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip address 10.99.1.1 255.255.255.0", "cmd": "ip address 10.99.1.1 255.255.255.0", "desc": "Applies an IPv4 address to the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip address 10.99.1.101", "cmd": "ip address 10.99.1.101", "desc": "Applies an IPv4 address to the interface" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "MPLS", "title": "ip nhrp redirect", "cmd": "ip nhrp redirect", "desc": "Applies an IPv4 address to the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip vrf forwarding GUEST", "cmd": "ip vrf forwarding GUEST", "desc": "Applies an IPv4 address to the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "vrf forwarding STAFF", "cmd": "vrf forwarding STAFF", "desc": "Applies an IPv4 address to the interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "tunnel source gigabitethernet 0/0/0", "cmd": "tunnel source gigabitethernet 0/0/0", "desc": "Defines the physical source of the tunnel" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "tunnel destination 198.51.100.1", "cmd": "tunnel destination 198.51.100.1", "desc": "Defines the tunnel destination across the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "tunnel destination 2001:db8:198:51::1", "cmd": "tunnel destination 2001:db8:198:51::1", "desc": "Defines the tunnel destination across the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "tunnel destination 209.165.201.1", "cmd": "tunnel destination 209.165.201.1", "desc": "Defines the tunnel destination across the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "tunnel destination 2001:db8:209:201::1", "cmd": "tunnel destination 2001:db8:209:201::1", "desc": "Defines the tunnel destination across the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "tunnel mode gre ip", "cmd": "tunnel mode gre ip", "desc": "Enables GRE tunnel mode for IPv4. This is" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 101 permit gre host 192.168.1.1 host 192.168.1.2", "cmd": "access-list 101 permit gre host 192.168.1.1 host 192.168.1.2", "desc": "Defines the crypto ACL that" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "ACL", "title": "access-list 101 permit gre host 192.168.1.2 host 192.168.1.1", "cmd": "access-list 101 permit gre host 192.168.1.2 host 192.168.1.1", "desc": "Step 2: Configure an ISAKMP Policy for IKE SA (repeat on CE2)" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto isakmp policy 1", "cmd": "crypto isakmp policy 1", "desc": "Numbers range from 1 to 1000" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "authentication preshare", "cmd": "authentication preshare", "desc": "Step 3: Configure PSKs" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto isakmp key secretkey address 198.51.100.1", "cmd": "crypto isakmp key secretkey address 198.51.100.1", "desc": "Defines a PSK for" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto isakmp key secretkey address 209.165.201.1", "cmd": "crypto isakmp key secretkey address 209.165.201.1", "desc": "Step 4: Create a Transform Set (repeat on CE2)" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto ipsec transform-set GRE-SEC esp-aes 256 esp-sha256-hmac", "cmd": "crypto ipsec transform-set GRE-SEC esp-aes 256 esp-sha256-hmac", "desc": "Enables transport mode to avoid double" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto map GREMAP 1 ipsecisakmp", "cmd": "crypto map GREMAP 1 ipsecisakmp", "desc": "A message will appear at the console indicating that the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "match address 101", "cmd": "match address 101", "desc": "ACL to the crypto map" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "set transformset GRE-SEC", "cmd": "set transformset GRE-SEC", "desc": "Applies the previously configured" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "set peer 198.51.100.1", "cmd": "set peer 198.51.100.1", "desc": "Step 4: Create an IPsec Profile (repeat on CE2)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "set peer 209.165.201.1", "cmd": "set peer 209.165.201.1", "desc": "Step 4: Create an IPsec Profile (repeat on CE2)" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto ipsec profile GRE-PROFILE", "cmd": "crypto ipsec profile GRE-PROFILE", "desc": "Creates an IPsec profile named GREPROFILE" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "set transform-set GRE-SEC", "cmd": "set transform-set GRE-SEC", "desc": "Verifying GRE/IPsec" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "show crypto isakmp sa", "cmd": "show crypto isakmp sa", "desc": "Displays current Internet Key Exchange (IKE)" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "show crypto ipsec sa", "cmd": "show crypto ipsec sa", "desc": "DMVPN Phase 1: Hub Router" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto isakmp policy 10", "cmd": "crypto isakmp policy 10", "desc": "Enables SHA-256 hashing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "authentication pre-share", "cmd": "authentication pre-share", "desc": "Exits the ISAKMP policy" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto isakmp", "cmd": "crypto isakmp", "desc": "Defines a PSK to be used for any ISAKMP neighbor" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto isakmp key CiscoDMVPNKey address 0.0.0.0", "cmd": "crypto isakmp key CiscoDMVPNKey address 0.0.0.0", "desc": "Defines a PSK to be used for any ISAKMP neighbor" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto ipsec transform-set DMVPNset espaes 256 espsha256-hmac", "cmd": "crypto ipsec transform-set DMVPNset espaes 256 espsha256-hmac", "desc": "Exits the transform set" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto ipsec profile DMVPNprofile", "cmd": "crypto ipsec profile DMVPNprofile", "desc": "Creates an IPsec profile called DMVPNprofile" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "set transform-set DMVPNset", "cmd": "set transform-set DMVPNset", "desc": "Applies an IP address to the tunnel interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip tcp adjust-mss 1360", "cmd": "ip tcp adjust-mss 1360", "desc": "Reduces the TCP maximum segment size to 1360" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "MPLS", "title": "ip nhrp authentication cisco", "cmd": "ip nhrp authentication cisco", "desc": "Configures a password of cisco for NHRP" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "MPLS", "title": "ip nhrp map multicast", "cmd": "ip nhrp map multicast", "desc": "Allows NHRP to automatically add spoke routers to" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "MPLS", "title": "ip nhrp map 10.99.1.1 10.99.0.1", "cmd": "ip nhrp map 10.99.1.1 10.99.0.1", "desc": "Allows NHRP to automatically add spoke routers to" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "MPLS", "title": "ip nhrp network-id 123", "cmd": "ip nhrp network-id 123", "desc": "Specifies a tunnel source" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "VPN", "title": "tunnel mode gre multipoint", "cmd": "tunnel mode gre multipoint", "desc": "Enables mGRE on the Hub router0" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "tunnel destination 10.99.0.1", "cmd": "tunnel destination 10.99.0.1", "desc": "Enables mGRE on the Hub router0" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "tunnel key 12345", "cmd": "tunnel key 12345", "desc": "Uniquely identifies the tunnel within the router" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "tunnel protection ipsec profile DMVPNprofile", "cmd": "tunnel protection ipsec profile DMVPNprofile", "desc": "Enables EIGRP using named mode configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "address-family ipv4 unicast autonomoussystem 10", "cmd": "address-family ipv4 unicast autonomoussystem 10", "desc": "Creates an IPv4 address family for AS 10" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "network 172.16.1.1 0.0.0.0", "cmd": "network 172.16.1.1 0.0.0.0", "desc": "Advertises network 172.16.1.1/32" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "network 172.16.101.1 0.0.0.0", "cmd": "network 172.16.101.1 0.0.0.0", "desc": "Advertises network 172.16.1.1/32" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "network 10.99.1.0 0.0.0.255", "cmd": "network 10.99.1.0 0.0.0.255", "desc": "Advertises network 10.99.1.0/24 (the tunnel" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "af-interface tunnel 0", "cmd": "af-interface tunnel 0", "desc": "Enters address-family interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "no split-horizon", "cmd": "no split-horizon", "desc": "Defines a PSK to be used for any ISAKMP" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto ipsec transform-set DMVPNset esp-aes 256 esp-sha256-hmac", "cmd": "crypto ipsec transform-set DMVPNset esp-aes 256 esp-sha256-hmac", "desc": "Maps the hub tunnel interface and physical" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "MPLS", "title": "ip nhrp map multicast 10.99.0.1", "cmd": "ip nhrp map multicast 10.99.0.1", "desc": "Defines an NHRP network ID" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "MPLS", "title": "ip nhrp nhs", "cmd": "ip nhrp nhs", "desc": "Exits interface configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "no next-hopself", "cmd": "no next-hopself", "desc": "Enters interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "NAT", "title": "no tunnel destination 10.99.0.1", "cmd": "no tunnel destination 10.99.0.1", "desc": "Phase 3 DMVPN is designed for the hub to only advertise a" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "show dmvpn", "cmd": "show dmvpn", "desc": "Displays DMVPN-specific session" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "MPLS", "title": "show ip nhrp", "cmd": "show ip nhrp", "desc": "Displays NHRP mapping information" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "MPLS", "title": "show ip nhrp nhs detail", "cmd": "show ip nhrp nhs detail", "desc": "Displays NHRP NHS information" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug dmvpn", "cmd": "debug dmvpn", "desc": "DMVPN sessions" }, { "os": "ios", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug nhrp", "cmd": "debug nhrp", "desc": "Follow these steps when configuring a Cisco router for VRF-Lite" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip vrf GUEST", "cmd": "ip vrf GUEST", "desc": "Exits VRF configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "vrf definition STAFF", "cmd": "vrf definition STAFF", "desc": "Overlay Tunnels and VRF" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "ip route vrf GUEST 0.0.0.0 0.0.0.0 172.16.16.2", "cmd": "ip route vrf GUEST 0.0.0.0 0.0.0.0 172.16.16.2", "desc": "Defines a default route for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "router ospf 1 vrf STAFF", "cmd": "router ospf 1 vrf STAFF", "desc": "Assigns the GUEST VRF to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "MPLS", "title": "show vrf", "cmd": "show vrf", "desc": "VRF CLI format" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system processes", "cmd": "show system processes", "desc": "some of these daemons are associated with the underlying OS." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "restart routing ?", "cmd": "restart routing ?", "desc": "ing the software processes." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system processes | match 2823", "cmd": "show system processes | match 2823", "desc": "Junos Fundamentals" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system processes summary", "cmd": "show system processes summary", "desc": "and the output that is generated:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "restart ?", "cmd": "restart ?", "desc": "The name in this case, however, is the full name of the daemon, so instead of entering chassisd, the option chassis-cont…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "save Save information to file", "cmd": "save Save information to file", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set Set CLI properties, date/time, craft interface message", "cmd": "set Set CLI properties, date/time, craft interface message", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ge-0/0/0", "cmd": "show interfaces ge-0/0/0", "desc": "into configuration mode and put an IP address on this interface, as well as naming" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ge-0/0/0 terse", "cmd": "show interfaces ge-0/0/0 terse", "desc": "Let’s see what effect adding terse has on our output:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces terse | ?", "cmd": "show interfaces terse | ?", "desc": "you to focus in on just the stuff you want to see." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces terse | match ge", "cmd": "show interfaces terse | match ge", "desc": "Let’s play with a few of these, starting with match." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ge-0/0/0 extensive | match error|flap", "cmd": "show interfaces ge-0/0/0 extensive | match error|flap", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "help apropos optics", "cmd": "help apropos optics", "desc": "tongue, but you can’t quite remember it." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show version and haiku", "cmd": "show version and haiku", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration interfaces | display set", "cmd": "show configuration interfaces | display set", "desc": "you’re interested in viewing:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "configure exclusive", "cmd": "configure exclusive", "desc": "But what if that’s not enough?" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load Load information from file", "cmd": "load Load information from file", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "save Save output text to file", "cmd": "save Save output text to file", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/1 unit 0 family inet address 10.10.13.1/24", "cmd": "set interfaces ge-0/0/1 unit 0 family inet address 10.10.13.1/24", "desc": "you’re interested in viewing:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system host-name Router_Chris", "cmd": "set system host-name Router_Chris", "desc": "For now, let’s correct the host-name:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rollback", "cmd": "rollback", "desc": "and see what happens:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load complete", "cmd": "load complete", "desc": "and see what happens:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit interfaces ge-0/0/2 unit 0", "cmd": "edit interfaces ge-0/0/2 unit 0", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set family inet address 10.10.14.1/24", "cmd": "set family inet address 10.10.14.1/24", "desc": "Let’s see what this looks like in full:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set family inet6 address 2001:db8:0:14::1/64", "cmd": "set family inet6 address 2001:db8:0:14::1/64", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit interfaces ge-0/0/1 unit 0", "cmd": "edit interfaces ge-0/0/1 unit 0", "desc": "In fact, pretty much every command you’ve learned so far is hierarchy-aware." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | display set", "cmd": "show | display set", "desc": "that you want to see in that moment." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | display set relative", "cmd": "show | display set relative", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set family inet address 10.10.13.1/24", "cmd": "set family inet address 10.10.13.1/24", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set family inet6 address 2001:db8:0:13::1/64", "cmd": "set family inet6 address 2001:db8:0:13::1/64", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/2 unit 0 family inet address 10.10.41.1/24", "cmd": "set interfaces ge-0/0/2 unit 0 family inet address 10.10.41.1/24", "desc": "Imagine that you made a typing mistake." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete interfaces ge-0/0/2 unit 0 family inet address 10.10.14.1/24", "cmd": "delete interfaces ge-0/0/2 unit 0 family inet address 10.10.14.1/24", "desc": "Look at that. Our second command didn’t over-write the first command at all. Instead, it’s added both IPs to the interface!" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "wildcard delete interfaces ge-0/0/*", "cmd": "wildcard delete interfaces ge-0/0/*", "desc": "The (no) in brackets indicates that if you were to just hit return, no would be the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Delete 3 objects? [yes,no] (no) no", "cmd": "Delete 3 objects? [yes,no] (no) no", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "replace pattern ge-0/0/2 with ge-0/0/3", "cmd": "replace pattern ge-0/0/2 with ge-0/0/3", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "ACL", "title": "edit firewall family inet filter EXAMPLE_FIREWALL_FILTER", "cmd": "edit firewall family inet filter EXAMPLE_FIREWALL_FILTER", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "insert term DENY_TELNET before term ACCEPT_ALL_ELSE", "cmd": "insert term DENY_TELNET before term ACCEPT_ALL_ELSE", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "deactivate makes it look like there was never any configuration there in the fir", "cmd": "deactivate makes it look like there was never any configuration there in the first", "desc": "The disable command kept it there and just showed it as admin-down." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit once again.", "cmd": "commit once again.", "desc": "for their changes to roll back." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "commit comment Chris Parker, adding BGP to the box", "cmd": "commit comment Chris Parker, adding BGP to the box", "desc": "were made when my colleagues were looking at this list of configurations." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ge-0/0/0 | display set", "cmd": "show interfaces ge-0/0/0 | display set", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load override DELETED_GE0.txt", "cmd": "load override DELETED_GE0.txt", "desc": "override command. I’m going to ask Junos to completely scrap the current candidate config, and replace it with my new fi…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/4 unit 0 family inet address 192.168.10.1/24", "cmd": "set interfaces ge-0/0/4 unit 0 family inet address 192.168.10.1/24", "desc": "The configuration has been changed but not committed" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit Show pending commit requests (if any) and commit history", "cmd": "commit Show pending commit requests (if any) and commit history", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rollback Show rolled back configuration", "cmd": "rollback Show rolled back configuration", "desc": "CLI Keyboard Shortcuts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "top of FreeBSD, after all!", "cmd": "top of FreeBSD, after all!", "desc": "If you’re a Mac or Linux user, try these commands out on your computer’s command line even when you’re not on your Junos box." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Delete the character before the cursor.", "cmd": "Delete the character before the cursor.", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Delete the character at the cursor.", "cmd": "Delete the character at the cursor.", "desc": "User Interface" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Delete the all characters from the command line.", "cmd": "Delete the all characters from the command line.", "desc": "Ctrl+w, Esc+Backspace, or" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Delete the word before the cursor.", "cmd": "Delete the word before the cursor.", "desc": "Esc+d or Alt+d" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Delete the word after the cursor.", "cmd": "Delete the word after the cursor.", "desc": "Filtering Output" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces terse", "cmd": "show interfaces terse", "desc": "vMX, and bearing in mind that so far I’ve only configured the ge-0/0/0 and ge0/0/1 interfaces, this is the entire output…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces terse | match ge | match inet", "cmd": "show interfaces terse | match ge | match inet", "desc": "Indeed it does! And it doesn’t end there – you can even do more pipes after that to" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces terse | match ge|inet", "cmd": "show interfaces terse | match ge|inet", "desc": "that we wanted to view any lines that contain either the text ge, or the text inet." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ge-0/0/0 extensive | match bytes", "cmd": "show interfaces ge-0/0/0 extensive | match bytes", "desc": "The first is command is clear: it’s clear! Ha ha, great stuff." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear interfaces statistics ge-0/0/0", "cmd": "clear interfaces statistics ge-0/0/0", "desc": "Some Additional Filtering Commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces extensive | match ge-0|error|flap | refresh 2", "cmd": "show interfaces extensive | match ge-0|error|flap | refresh 2", "desc": "Some Additional Filtering Commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces terse | match ge | except inet", "cmd": "show interfaces terse | match ge | except inet", "desc": "inet. Remember, the protocol is configured on the logical interface, not the physical interface:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces terse | match ge | except inet | count", "cmd": "show interfaces terse | match ge | except inet | count", "desc": "large Juniper MX router, with dozens of gig-ethernet interfaces, you might be interested to know precisely how many of these interfaces your box currently hosts." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "up", "cmd": "up", "desc": "inet. Remember, the protocol is configured on the logical interface, not the physical interface:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "up and read it all at your leisure.", "cmd": "up and read it all at your leisure.", "desc": "the entire result of your command to the screen in one hit, so you can scroll back" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "help topic ospf export", "cmd": "help topic ospf export", "desc": "There’s about 50 top-level topics, including interfaces, routing-options, OSPF, firewall, BGP, and plenty more." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "help tip cli", "cmd": "help tip cli", "desc": "Before we leave the online help files, there are two extras I want to show you." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration", "cmd": "show configuration", "desc": "You’ll immediately notice that the configuration looks almost like a programming" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration interfaces ge-0/0/0", "cmd": "show configuration interfaces ge-0/0/0", "desc": "look at a section of the configuration as an example." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/0 unit 0 family inet address 10.10.12.1/24", "cmd": "set interfaces ge-0/0/0 unit 0 family inet address 10.10.12.1/24", "desc": "the command below, line up precisely:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration | display set | match ge-0/0/0", "cmd": "show configuration | display set | match ge-0/0/0", "desc": "format. Now, add this to the end of the command:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set protocols ospf area 0.0.0.0 interface ge-0/0/0.0", "cmd": "set protocols ospf area 0.0.0.0 interface ge-0/0/0.0", "desc": "format. Now, add this to the end of the command:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "ACL", "title": "set firewall apply-flags omit", "cmd": "set firewall apply-flags omit", "desc": "we’re very close to learning how to get into it!" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system host-name Router_1", "cmd": "set system host-name Router_1", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system name-server 8.8.8.8", "cmd": "set system name-server 8.8.8.8", "desc": "Now that we’ve added the configuration to change our hostname, let’s make an" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | compare", "cmd": "show | compare", "desc": "Now that we’ve added the configuration to change our hostname, let’s make an" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "run ping 10.10.13.3", "cmd": "run ping 10.10.13.3", "desc": "Modifying Configurations: An Introduction to the Set Command" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration interfaces ge-0/0/1", "cmd": "show configuration interfaces ge-0/0/1", "desc": "Once saved, the interface configuration now looks like this:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration interfaces ge-0/0/1 | display set", "cmd": "show configuration interfaces ge-0/0/1 | display set", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/1 unit 0 family inet6 address 2001:db8:0:13::1/64", "cmd": "set interfaces ge-0/0/1 unit 0 family inet6 address 2001:db8:0:13::1/64", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/2 unit 0 family inet address 10.10.14.1/24", "cmd": "set interfaces ge-0/0/2 unit 0 family inet address 10.10.14.1/24", "desc": "Let’s imagine that I wanted to configure a brand new interface, ge-0/0/2, and give" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/2 unit 0 family inet6 address 2001:db8:0:14::1/64", "cmd": "set interfaces ge-0/0/2 unit 0 family inet6 address 2001:db8:0:14::1/64", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "top show protocols ospf", "cmd": "top show protocols ospf", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "help apropos neighbor", "cmd": "help apropos neighbor", "desc": "you were about to configure some BGP, but you couldn’t remember how to set a" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set path-selection always-compare-med", "cmd": "set path-selection always-compare-med", "desc": "you were about to configure some BGP, but you couldn’t remember how to set a" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set group as-override", "cmd": "set group as-override", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Replace neighbor AS number with our AS number", "cmd": "Replace neighbor AS number with our AS number", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set group neighbor", "cmd": "set group neighbor", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set group neighbor
as-override", "cmd": "set group neighbor
as-override", "desc": "Modifying Configurations: Delete" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/3 unit 0 description Interface reserved for great justice", "cmd": "set interfaces ge-0/0/3 unit 0 description Interface reserved for great justice", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit system", "cmd": "edit system", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set host-name NewRouter", "cmd": "set host-name NewRouter", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit", "cmd": "commit", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit complete", "cmd": "commit complete", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "run show configuration interfaces ge-0/0/3 | display set", "cmd": "run show configuration interfaces ge-0/0/3 | display set", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete interfaces ge-0/0/2 unit 0 family inet address 10.10.41.1/24", "cmd": "delete interfaces ge-0/0/2 unit 0 family inet address 10.10.41.1/24", "desc": "Be careful though. You might think the delete command is simple and self-explanatory but there’s a bit more to this comm…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete interfaces ge-0/0/2 unit 0 family inet6 address 2001:db8:0:14::1/64", "cmd": "delete interfaces ge-0/0/2 unit 0 family inet6 address 2001:db8:0:14::1/64", "desc": "Modifying Configurations: Rename, Replace Pattern, and Copy" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rename family inet address 10.10.41.1/24 to address 10.10.14.1/24", "cmd": "rename family inet address 10.10.41.1/24 to address 10.10.14.1/24", "desc": "can use rename to quickly change it back:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "top show | compare", "cmd": "top show | compare", "desc": "can use rename to quickly change it back:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "copy interfaces ge-0/0/2 to ge-0/0/3", "cmd": "copy interfaces ge-0/0/2 to ge-0/0/3", "desc": "as necessary, for example disabling one interface while the other remains live to get" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration | find firewall", "cmd": "show configuration | find firewall", "desc": "can see, they’re slightly longer in Junos – but they’re also written in plain English," }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete firewall apply-flags omit", "cmd": "delete firewall apply-flags omit", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "ACL", "title": "set firewall family inet filter EXAMPLE_FIREWALL_FILTER term DENY_", "cmd": "set firewall family inet filter EXAMPLE_FIREWALL_FILTER term DENY_", "desc": "For now, let’s imagine we add an extra term to this filter, denying Telnet traffic:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "ACL", "title": "set firewall family inet filter EXAMPLE_FIREWALL_FILTER term DENY_TELNET then di", "cmd": "set firewall family inet filter EXAMPLE_FIREWALL_FILTER term DENY_TELNET then discard", "desc": "Modifying Configurations: Disable and Deactivate" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "activate Remove the inactive tag from a statement", "cmd": "activate Remove the inactive tag from a statement", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "annotate Annotate the statement with a comment", "cmd": "annotate Annotate the statement with a comment", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit Commit current set of changes", "cmd": "commit Commit current set of changes", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "copy Copy a statement", "cmd": "copy Copy a statement", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "deactivate Add the inactive tag to a statement", "cmd": "deactivate Add the inactive tag to a statement", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete Delete a data element", "cmd": "delete Delete a data element", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit Edit a sub-element", "cmd": "edit Edit a sub-element", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "exit Exit from this level", "cmd": "exit Exit from this level", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load Load configuration from ASCII file", "cmd": "load Load configuration from ASCII file", "desc": "insert               Insert a new ordered data element" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "protect Protect the statement", "cmd": "protect Protect the statement", "desc": "insert               Insert a new ordered data element" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rename Rename a statement", "cmd": "rename Rename a statement", "desc": "insert               Insert a new ordered data element" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "replace Replace character string in configuration", "cmd": "replace Replace character string in configuration", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rollback Roll back to previous committed configuration", "cmd": "rollback Roll back to previous committed configuration", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "save Save configuration to ASCII file", "cmd": "save Save configuration to ASCII file", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set Set a parameter", "cmd": "set Set a parameter", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "top Exit to top level of configuration", "cmd": "top Exit to top level of configuration", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "up Exit one level of configuration", "cmd": "up Exit one level of configuration", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "deactivate interfaces ge-0/0/1", "cmd": "deactivate interfaces ge-0/0/1", "desc": "Notice that ge-0/0/1 has both a physical and a logical entry." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/1 description Connection to ISP via Evil Internet Inc", "cmd": "set interfaces ge-0/0/1 description Connection to ISP via Evil Internet Inc", "desc": "The best you can hope for is that someone has left a description on an interface to" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "annotate protocols Only Chris Parker can configure this section!", "cmd": "annotate protocols Only Chris Parker can configure this section!", "desc": "that only I was allowed to make protocol changes on this box." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "protect protocols", "cmd": "protect protocols", "desc": "And that’s why the wizards behind Junos did exactly that, and added this" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete protocols", "cmd": "delete protocols", "desc": "Once that’s saved, if someone tries to delete this interface, their commit will fail:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit and-quit", "cmd": "commit and-quit", "desc": "Managing and Saving Configuration Files: Commit, Commit and Quit, Commit Confirmed" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit confirmed 3", "cmd": "commit confirmed 3", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Commit was not confirmed; automatic rollback complete.", "cmd": "Commit was not confirmed; automatic rollback complete.", "desc": "Managing and Saving Configuration Files: Commit Check, and Commit" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/1 unit 0 family inet filter input FAKE_FIREWALL_FILTER", "cmd": "set interfaces ge-0/0/1 unit 0 family inet filter input FAKE_FIREWALL_FILTER", "desc": "Let’s see how we might add a firewall filter to an interface when we haven’t configured the rule itself:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system commit", "cmd": "show system commit", "desc": "Let’s look at our commit history again and see the results of this comment." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rollback 5", "cmd": "rollback 5", "desc": "Let’s imagine that I wanted to roll back to configuration number 5 on my lab router." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | compare rollback 6", "cmd": "show | compare rollback 6", "desc": "your current active configuration to an older configuration, without first importing it into the candidate configuration? Again, this is easy." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration | save SAVED_CONFIG.txt", "cmd": "show configuration | save SAVED_CONFIG.txt", "desc": "of any command to a text file." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file list", "cmd": "file list", "desc": "of any command to a text file." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "save BACKUP_CONFIG_FILE.txt", "cmd": "save BACKUP_CONFIG_FILE.txt", "desc": "But as always, Junos doesn’t stop there: you can also save a backup of your candidate configuration – that’s the candida…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete interfaces ge-0/0/0", "cmd": "delete interfaces ge-0/0/0", "desc": "candidate configuration to a file:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/8 unit 0 description FAKE INTERFACE", "cmd": "set interfaces ge-0/0/8 unit 0 description FAKE INTERFACE", "desc": "candidate configuration to a file:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "save DELETED_GE0.txt", "cmd": "save DELETED_GE0.txt", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load override terminal", "cmd": "load override terminal", "desc": "CLI Help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system services web-management https interface ge-/0/0/0", "cmd": "set system services web-management https interface ge-/0/0/0", "desc": "an IP to log onto, and so on." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load factory default", "cmd": "load factory default", "desc": "This configuration overrides existing configuration with factory default configuration and replaces the current active configuration." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit check", "cmd": "commit check", "desc": "Because the load factory default command requires a commit you will need to" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login user noc-user class operator authentication plain-text-password", "cmd": "set system login user noc-user class operator authentication plain-text-password", "desc": "the plain-text-password option, you are prompted to enter and confirm the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login class noc-user-class permissions ?", "cmd": "set system login class noc-user-class permissions ?", "desc": "Let’s create a custom built login class to give you some idea of how this works." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rollback Can rollback to previous configurations", "cmd": "rollback Can rollback to previous configurations", "desc": "Login Classes" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login class noc-user-class permissions [ clear network trace view vie", "cmd": "set system login class noc-user-class permissions [ clear network trace view viewconfiguration ]", "desc": "So, how does this look in the CLI?" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login class noc-user-class login-alarms", "cmd": "set system login class noc-user-class login-alarms", "desc": "So, how does this look in the CLI?" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login class noc-user-class login-tip", "cmd": "set system login class noc-user-class login-tip", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login class noc-user-class idle-timeout idle-imeout", "cmd": "set system login class noc-user-class idle-timeout idle-imeout", "desc": "will time out after remaining at the CLI operational mode prompt for the specified" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login user noc-user class noc-user authentication plain-text-password", "cmd": "set system login user noc-user class noc-user authentication plain-text-password", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set protocols ospf traceoptions file ospf-log", "cmd": "set protocols ospf traceoptions file ospf-log", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set protocols ospf traceoptions file files 5 size 10k", "cmd": "set protocols ospf traceoptions file files 5 size 10k", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set protocols ospf traceoptions flag lsa-ack", "cmd": "set protocols ospf traceoptions flag lsa-ack", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set protocols ospf traceoptions flag database-description", "cmd": "set protocols ospf traceoptions flag database-description", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set protocols ospf traceoptions flag hello", "cmd": "set protocols ospf traceoptions flag hello", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces xe-0/0/12 unit 0 family inet address 10.10.10.10/24", "cmd": "set interfaces xe-0/0/12 unit 0 family inet address 10.10.10.10/24", "desc": "also an interface. In our case, we assume he knows Junos and really means interface 12. 10Gigabit interfaces are xe-Inte…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set login user remote full-name RADIUS Template User uid 1337 class read-only", "cmd": "set login user remote full-name RADIUS Template User uid 1337 class read-only", "desc": "the default remote user, use:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login user Callagents class read-only", "cmd": "set system login user Callagents class read-only", "desc": "and assign them the correct corresponding permissions:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login user Noc-operators class operator", "cmd": "set system login user Noc-operators class operator", "desc": "and assign them the correct corresponding permissions:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login user Administrator class super-user", "cmd": "set system login user Administrator class super-user", "desc": "and assign them the correct corresponding permissions:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "set ntp boot-server 10.1.4.1", "cmd": "set ntp boot-server 10.1.4.1", "desc": "wrong time but all of them use the exact same wrong time, you can still troubleshoot the issue very precisely because they all agreed at the same time." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "set ntp server 10.1.4.2", "cmd": "set ntp server 10.1.4.2", "desc": "wrong time but all of them use the exact same wrong time, you can still troubleshoot the issue very precisely because they all agreed at the same time." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "set ntp authentication-key 2 type md5 value $ABC123", "cmd": "set ntp authentication-key 2 type md5 value $ABC123", "desc": "wrong time but all of them use the exact same wrong time, you can still troubleshoot the issue very precisely because they all agreed at the same time." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "set snmp location Lab 4 Row 11 contact contact@mail.tld", "cmd": "set snmp location Lab 4 Row 11 contact contact@mail.tld", "desc": "Let’s have a look at how to configure it:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "set snmp community public client-list-name list0", "cmd": "set snmp community public client-list-name list0", "desc": "Let’s have a look at how to configure it:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "set snmp client-list list0 192.168.0.0/24", "cmd": "set snmp client-list list0 192.168.0.0/24", "desc": "Let’s have a look at how to configure it:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "set snmp trap-group qf-traps destination-port 155 targets 192.168.0.100", "cmd": "set snmp trap-group qf-traps destination-port 155 targets 192.168.0.100", "desc": "Configuration Archival" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration | display set", "cmd": "show configuration | display set", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set version 20191212.201431_builder.r1074901", "cmd": "set version 20191212.201431_builder.r1074901", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system host-name vqfx-re", "cmd": "set system host-name vqfx-re", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system root-authentication encrypted-password", "cmd": "set system root-authentication encrypted-password", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system root-authentication ssh-rsa \"ssh-rsa", "cmd": "set system root-authentication ssh-rsa \"ssh-rsa", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login user vagrant uid 2000", "cmd": "set system login user vagrant uid 2000", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login user vagrant class super-user", "cmd": "set system login user vagrant class super-user", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login user vagrant authentication ssh-rsa \"ssh-rsa", "cmd": "set system login user vagrant authentication ssh-rsa \"ssh-rsa", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system services ssh root-login allow", "cmd": "set system services ssh root-login allow", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system services netconf ssh", "cmd": "set system services netconf ssh", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system services rest http port 8080", "cmd": "set system services rest http port 8080", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system services rest enable-explorer", "cmd": "set system services rest enable-explorer", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog user * any emergency", "cmd": "set system syslog user * any emergency", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog file messages any notice", "cmd": "set system syslog file messages any notice", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog file messages authorization info", "cmd": "set system syslog file messages authorization info", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog file interactive-commands interactive-commands any", "cmd": "set system syslog file interactive-commands interactive-commands any", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system extensions providers juniper license-type juniper deployment-scope co", "cmd": "set system extensions providers juniper license-type juniper deployment-scope commercial", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system extensions providers chef license-type juniper deployment-scope comme", "cmd": "set system extensions providers chef license-type juniper deployment-scope commercial", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "set interfaces em0 unit 0 family inet dhcp", "cmd": "set interfaces em0 unit 0 family inet dhcp", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces em1 unit 0 family inet address 169.254.0.2/24", "cmd": "set interfaces em1 unit 0 family inet address 169.254.0.2/24", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set forwarding-options storm-control-profiles default all", "cmd": "set forwarding-options storm-control-profiles default all", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "set protocols igmp-snooping vlan default", "cmd": "set protocols igmp-snooping vlan default", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "set vlans default vlan-id 1", "cmd": "set vlans default vlan-id 1", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system radius-server address 172.16.2.200", "cmd": "set system radius-server address 172.16.2.200", "desc": "The RADIUS configuration on Juniper is actually quite simple; however, to get Junos to authenticate a user and provide t…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system radius-server 172.16.2.200 secret mysupersecretradiussecret", "cmd": "set system radius-server 172.16.2.200 secret mysupersecretradiussecret", "desc": "the RADIUS server. This is done via:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system radius-server 172.16.2.200 source-address 192.168.0.254", "cmd": "set system radius-server 172.16.2.200 source-address 192.168.0.254", "desc": "interface is used so that RADIUS will still work if a particular interface goes down." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/0.0 family inet address 172.16.2.1/24", "cmd": "set interfaces ge-0/0/0.0 family inet address 172.16.2.1/24", "desc": "to be configured on a single physical interface." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/0 unit 1 family inet address 172.16.2.1/24", "cmd": "set interfaces ge-0/0/0 unit 1 family inet address 172.16.2.1/24", "desc": "to be configured on a single physical interface." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show groups mygroup", "cmd": "show groups mygroup", "desc": "can be inherited in different places in the configuration." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ge-0/0/3 | display inheritance", "cmd": "show interfaces ge-0/0/3 | display inheritance", "desc": "to give us the configuration including all the hierarchy, you can see that your interface, ge-0/0/3, got some info from …" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces apply-groups mygroup", "cmd": "set interfaces apply-groups mygroup", "desc": "After creating this group, you need to activate it:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog host 172.16.2.200 any any", "cmd": "set system syslog host 172.16.2.200 any any", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog host 172.16.2.200 ?", "cmd": "set system syslog host 172.16.2.200 ?", "desc": "Instead of inserting any, you can choose whatever you think is interesting:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog file messages authorization notice", "cmd": "set system syslog file messages authorization notice", "desc": "Junos Configuration Basics" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog archive size 5m", "cmd": "set system syslog archive size 5m", "desc": "will write messages to a file until it reaches 1MB." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog archive files 5", "cmd": "set system syslog archive files 5", "desc": "will write messages to a file until it reaches 1MB." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "monitor traffic matching src||dst 192.168.1.1", "cmd": "monitor traffic matching src||dst 192.168.1.1", "desc": "with either the source address OR the destination equal 192." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "monitor traffic interface ge-0/0/2 matching proto ospf extensive", "cmd": "monitor traffic interface ge-0/0/2 matching proto ospf extensive", "desc": "Let’s go back in time." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "monitor traffic matching udp&&port ntp no-resolve layer2-headers write-file dns.", "cmd": "monitor traffic matching udp&&port ntp no-resolve layer2-headers write-file dns.pcap", "desc": "Operational Monitoring and Maintenance" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "monitor traffic matching udp&&port ntp no-resolve layer2-headers write-file dns.", "cmd": "monitor traffic matching udp&&port ntp no-resolve layer2-headers write-file dns.", "desc": "the count option to specify the number of packets to capture:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "telnet 192.168.254.1 port 80", "cmd": "telnet 192.168.254.1 port 80", "desc": "to the remote server. In the next example, we are attempting to establish a connection using port 80. As you can see in …" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "telnet 192.168.254.1 port 81", "cmd": "telnet 192.168.254.1 port 81", "desc": "the connection was refused:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "request system storage cleanup dry-run", "cmd": "request system storage cleanup dry-run", "desc": "Operational Monitoring and Maintenance" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "edit -- Can edit full files", "cmd": "edit -- Can edit full files", "desc": "Operational Monitoring and Maintenance" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "rollback -- Can rollback to previous configurations", "cmd": "rollback -- Can rollback to previous configurations", "desc": "interface-control-- Can modify interface configuration" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "run monitor traffic interface ge-0/0/2 matching proto 89", "cmd": "run monitor traffic interface ge-0/0/2 matching proto 89", "desc": "Now what if we want to monitor an interface other than the management interface (e." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis hardware", "cmd": "show chassis hardware", "desc": "This first example shows the output on an SRX4200, which is a medium side, fixedconfiguration next generation firewall:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Load averages: 1 minute 5 minute 15 minute", "cmd": "Load averages: 1 minute 5 minute 15 minute", "desc": "System Hardware Environment and Status Verification" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis hardware | match SCB", "cmd": "show chassis hardware | match SCB", "desc": "You can check the presence of the SCBs with show chassis hardware | match SCB," }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis hardware models | match SCBE", "cmd": "show chassis hardware models | match SCBE", "desc": "REV 07 710-021523 ABBD1410\t\t MX SCB" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment", "cmd": "show chassis environment", "desc": "use show chassis environment." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system core-dumps", "cmd": "show system core-dumps", "desc": "observed at the time of the crash, as well as which action was taken (like configuration changes, software upgrade, addi…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system uptime", "cmd": "show system uptime", "desc": "can help detect any hardware failure that might have caused, for example, a RE" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "set interfaces ge-0/0/0 vlan-tagging", "cmd": "set interfaces ge-0/0/0 vlan-tagging", "desc": "and in that case, the interface can only have more than one unit." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "set interfaces ge-0/0/0 unit 100 vlan-id 100", "cmd": "set interfaces ge-0/0/0 unit 100 vlan-id 100", "desc": "and in that case, the interface can only have more than one unit." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/0 unit 100 family inet address 192.168.1.1/24", "cmd": "set interfaces ge-0/0/0 unit 100 family inet address 192.168.1.1/24", "desc": "and in that case, the interface can only have more than one unit." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/0 unit 100 family iso", "cmd": "set interfaces ge-0/0/0 unit 100 family iso", "desc": "REV 07 710-021523 ABBD1410\t\t MX SCB" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/0 unit 100 family inet6 address 2001:db8:192:168:1::1/64", "cmd": "set interfaces ge-0/0/0 unit 100 family inet6 address 2001:db8:192:168:1::1/64", "desc": "REV 07 710-021523 ABBD1410\t\t MX SCB" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "set interfaces ge-0/0/0 unit 100 family mpls", "cmd": "set interfaces ge-0/0/0 unit 100 family mpls", "desc": "REV 07 710-021523 ABBD1410\t\t MX SCB" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "set interfaces ge-0/0/0 unit 200 vlan-id 200", "cmd": "set interfaces ge-0/0/0 unit 200 vlan-id 200", "desc": "REV 07 710-021523 ABBD1410\t\t MX SCB" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/0 unit 200 family inet address 192.168.10.1/24", "cmd": "set interfaces ge-0/0/0 unit 200 family inet address 192.168.10.1/24", "desc": "Flags: Is-Primary" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "monitor traffic ?", "cmd": "monitor traffic ?", "desc": "the level of detail that you need:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "monitor traffic matching udp", "cmd": "monitor traffic matching udp", "desc": "In this particular case, you can simply use monitor traffic matching udp, since there" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "monitor traffic matching udp&&port ntp", "cmd": "monitor traffic matching udp&&port ntp", "desc": "The filter helped, but if we had other UDP traffic, we would not have had the full" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "monitor traffic matching udp&&port ntp no-resolve", "cmd": "monitor traffic matching udp&&port ntp no-resolve", "desc": "of displaying the port number it shows ." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "monitor traffic matching udp&&port ntp no-resolve layer2-headers", "cmd": "monitor traffic matching udp&&port ntp no-resolve layer2-headers", "desc": "The next option looks at layer2-headers, which will help you when you need to" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/0 unit 200 family inet address 192.168.10.10/24", "cmd": "set interfaces ge-0/0/0 unit 200 family inet address 192.168.10.10/24", "desc": "REV 07 710-021523 ABBD1410\t\t MX SCB" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "run monitor traffic interface ge-0/0/2 matching proto ospf", "cmd": "run monitor traffic interface ge-0/0/2 matching proto ospf", "desc": "You can enter the name of the protocol instead of the number for many standard" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "run monitor traffic interface ge-0/0/3 matching proto ospf", "cmd": "run monitor traffic interface ge-0/0/3 matching proto ospf", "desc": "Well, you now know how to capture OSPF packets, but what if you see this:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "monitor traffic", "cmd": "monitor traffic", "desc": "the management interface of your device (therefore: fxp0, me0, em0, etc." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "run monitor traffic", "cmd": "run monitor traffic", "desc": "the management interface of your device (therefore: fxp0, me0, em0, etc." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "ping 192.168.255.2", "cmd": "ping 192.168.255.2", "desc": "In Junos there are a few knobs and attributes that you can use to customize your" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "ping 192.168.255.2 rapid", "cmd": "ping 192.168.255.2 rapid", "desc": "If you append rapid to the end of the ping command, the device will send five packets and then stop." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "traceroute 192.168.254.1", "cmd": "traceroute 192.168.254.1", "desc": "and the second hop was 192." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "traceroute monitor 192.168.254.1", "cmd": "traceroute monitor 192.168.254.1", "desc": "traceroute monitor command." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration services rpm", "cmd": "show configuration services rpm", "desc": "REV 07 710-021523 ABBD1410\t\t MX SCB" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services rpm probe-results", "cmd": "show services rpm probe-results", "desc": "In the output from that command you can see that the owner is JNCIA, the test is" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services rpm history-results brief owner JNCIA", "cmd": "show services rpm history-results brief owner JNCIA", "desc": "the test that were caused by us shutting down the interface so that we would see" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software add /var/tmp/jinstall-ex-2200-12.3R12.4-domestic-signed.", "cmd": "request system software add /var/tmp/jinstall-ex-2200-12.3R12.4-domestic-signed.", "desc": "Powering On, Shutting Down, and Rebooting Junos Devices" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system halt", "cmd": "request system halt", "desc": "for a keypress to reboot:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system power-off", "cmd": "request system power-off", "desc": "Root Password Reset" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system root-authentication plain-text-password", "cmd": "set system root-authentication plain-text-password", "desc": "Now you can enter configure mode and change the root password with the set" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "load balancing policy for the forwarding table:", "cmd": "load balancing policy for the forwarding table:", "desc": "only one of them will become the active route and will be installed in the forwarding table." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "Load balancing", "cmd": "Load balancing", "desc": "This chapter focuses on routing policies to control routing information, but Table" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set policy-options policy-statement load-balance term 1 then load-balance per-pa", "cmd": "set policy-options policy-statement load-balance term 1 then load-balance per-packet", "desc": "This policy could be as simple as:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set routing-options forwarding-table export load-balance", "cmd": "set routing-options forwarding-table export load-balance", "desc": "This policy could be as simple as:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "set policy-statement bgp-to-ospf ….", "cmd": "set policy-statement bgp-to-ospf ….", "desc": "For example, you can create a policy named bgp-to-ospf and then apply it to ospf:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "set export bgp-to-ospf", "cmd": "set export bgp-to-ospf", "desc": "For example, you can create a policy named bgp-to-ospf and then apply it to ospf:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show route protocol bgp hidden", "cmd": "show route protocol bgp hidden", "desc": "The only difference is that the 10." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show route protocol bgp terse 10.1.1/24 exact hidden", "cmd": "show route protocol bgp terse 10.1.1/24 exact hidden", "desc": "Let’s try deactivate the action within term 2:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route protocol static", "cmd": "show route protocol static", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show ospf neighbor", "cmd": "show ospf neighbor", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 123 then accept", "cmd": "set term 123 then accept", "desc": "and special characters:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term FIRST then reject", "cmd": "set term FIRST then reject", "desc": "and special characters:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term LAB123 then accept", "cmd": "set term LAB123 then accept", "desc": "and special characters:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term term_#2 then reject", "cmd": "set term term_#2 then reject", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 5 then accept", "cmd": "set term 5 then accept", "desc": "If, for example, we create the following policy and add terms 5, 2, and 6, in that" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 2 then accept", "cmd": "set term 2 then accept", "desc": "If, for example, we create the following policy and add terms 5, 2, and 6, in that" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 6 then accept", "cmd": "set term 6 then accept", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 then accept", "cmd": "set term 1 then accept", "desc": "If we configure term 1 now:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "insert term 1 before term 2", "cmd": "insert term 1 before term 2", "desc": "You can reorder terms with one of the CLI tricks learned in Chapter 2:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term AGGREGATE from route-filter 172.16.0.0/16 exact", "cmd": "set term AGGREGATE from route-filter 172.16.0.0/16 exact", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term AGGREGATE then reject", "cmd": "set term AGGREGATE then reject", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term SUBNET from route-filter 172.16.1.0/24 exact", "cmd": "set term SUBNET from route-filter 172.16.1.0/24 exact", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term SUBNET then accept", "cmd": "set term SUBNET then accept", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "insert term SUBNET before term AGGREGATE", "cmd": "insert term SUBNET before term AGGREGATE", "desc": "will be rejected, and that would be it for this route." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 2 from protocol direct", "cmd": "set term 2 from protocol direct", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 2 from interface ge-0/0/0.0", "cmd": "set term 2 from interface ge-0/0/0.0", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set from prefix-list-filter ?", "cmd": "set from prefix-list-filter ?", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show| display set relative", "cmd": "show| display set relative", "desc": "You can use the same prefix list created in the previous example." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "delete prefix-list REJECT-RFC1918", "cmd": "delete prefix-list REJECT-RFC1918", "desc": "Let’s modify the policy the following way:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set prefix-list-filter REJECT-RFC1918 orlonger", "cmd": "set prefix-list-filter REJECT-RFC1918 orlonger", "desc": "Let’s modify the policy the following way:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set from route-filter 10.0.0.0/8 orlonger", "cmd": "set from route-filter 10.0.0.0/8 orlonger", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set from route-filter 172.16.0.0/12 orlonger", "cmd": "set from route-filter 172.16.0.0/12 orlonger", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set from route-filter 192.168.0.0/16 orlonger", "cmd": "set from route-filter 192.168.0.0/16 orlonger", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term REJECT-RFC1918 then reject", "cmd": "set term REJECT-RFC1918 then reject", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import ROUTE-FILTER-POLICY", "cmd": "set import ROUTE-FILTER-POLICY", "desc": "Notice the use of orlonger because we want it to match the prefix, and any subnet" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "deactivate accept", "cmd": "deactivate accept", "desc": "Let’s try deactivate the action within term 2:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import POLICY_2", "cmd": "set import POLICY_2", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show | display set relative | match import", "cmd": "show | display set relative | match import", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import POLICY_NEW", "cmd": "set import POLICY_NEW", "desc": "Sometimes you need to add an additional policy later on, and like terms, any new" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set type external", "cmd": "set type external", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "insert import POLICY_3 after POLICY_2", "cmd": "insert import POLICY_3 after POLICY_2", "desc": "We can use the same trick we used before to reorder terms, to reorder policies:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "insert import POLICY_NEW before POLICY_1", "cmd": "insert import POLICY_NEW before POLICY_1", "desc": "We can use the same trick we used before to reorder terms, to reorder policies:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import [ POLICY_NEW POLICY_1 POLICY_2 POLICY_3 ]", "cmd": "set import [ POLICY_NEW POLICY_1 POLICY_2 POLICY_3 ]", "desc": "You can also enter the multiple policies using square brackets, like this:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 10.0.0.0/8 exact", "cmd": "set term 1 from route-filter 10.0.0.0/8 exact", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 192.168.3.3/32 exact", "cmd": "set term 1 from route-filter 192.168.3.3/32 exact", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export ", "cmd": "set export ", "desc": "A route needs to math protocol static AND one of the two route-filters to match" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import ", "cmd": "set import ", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export redistribute-static", "cmd": "set export redistribute-static", "desc": "static routes already in the routing table, which means EXPORT, and we are sending them to our OSPF neighbor, that means…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "delete term 1 from route-filter 10.0.0.0/8 exact", "cmd": "delete term 1 from route-filter 10.0.0.0/8 exact", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "delete term 1 from route-filter 192.168.3.3/32 exact", "cmd": "delete term 1 from route-filter 192.168.3.3/32 exact", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from prefix-list STATICS", "cmd": "set term 1 from prefix-list STATICS", "desc": "Policy Components" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "insert term 5 after term 2", "cmd": "insert term 5 after term 2", "desc": "Matching Criteria – The From Statement" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "set term 1 from protocol bgp", "cmd": "set term 1 from protocol bgp", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from protocol static", "cmd": "set term 1 from protocol static", "desc": "Prefix List Example" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show route protocol bgp terse", "cmd": "show route protocol bgp terse", "desc": "that rejects all the prefixes from the private address ranges (10/8, 172." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show route protocol bgp terse | match 10\\.| 192.168| 172.16.*.*/*", "cmd": "show route protocol bgp terse | match 10\\.| 192.168| 172.16.*.*/*", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set 10.0.0.0/8", "cmd": "set 10.0.0.0/8", "desc": "To simplify your configuration you decide to use prefix-lists, so you create a prefixlist named REJECT-RFC1918, that mat…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set 172.16.0.0/12", "cmd": "set 172.16.0.0/12", "desc": "To simplify your configuration you decide to use prefix-lists, so you create a prefixlist named REJECT-RFC1918, that mat…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set 192.168.0.0/16", "cmd": "set 192.168.0.0/16", "desc": "To simplify your configuration you decide to use prefix-lists, so you create a prefixlist named REJECT-RFC1918, that mat…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from p?", "cmd": "set term 1 from p?", "desc": "You first check how to apply the prefix list that you created:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from prefix-list REJECT-RFC1918", "cmd": "set term 1 from prefix-list REJECT-RFC1918", "desc": "And configure the policy as:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 then reject", "cmd": "set term 1 then reject", "desc": "And configure the policy as:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "set term 2 from protocol bgp", "cmd": "set term 2 from protocol bgp", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "set import REJECT-BGP-RFC1918", "cmd": "set import REJECT-BGP-RFC1918", "desc": "You remember to apply the policy as an IMPORT policy as you want to filter" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "ping 192.168.3.3 rapid", "cmd": "ping 192.168.3.3 rapid", "desc": "As this point we should be able to ping from R2 to the addresses behind R3:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "ping 10.1.1.1 rapid", "cmd": "ping 10.1.1.1 rapid", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route forwarding-table destination 192.168.2.2/32", "cmd": "show route forwarding-table destination 192.168.2.2/32", "desc": "and 172.16.2.2. However, when you look at the forwarding table:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "set from protocol bgp", "cmd": "set from protocol bgp", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set from prefix-list REJECT-RFC1918", "cmd": "set from prefix-list REJECT-RFC1918", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set then reject", "cmd": "set then reject", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set from pr?", "cmd": "set from pr?", "desc": "The difference here is the way you reference or call the prefix-list from the routing-policy." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set ospf area interface ", "cmd": "set ospf area interface ", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set prefix-list ", "cmd": "set prefix-list ", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set from prefix-list ", "cmd": "set from prefix-list ", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set 192.168.3.3/32", "cmd": "set 192.168.3.3/32", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "set static route 10.1.1.0/24 next-hop 172.16.2.2", "cmd": "set static route 10.1.1.0/24 next-hop 172.16.2.2", "desc": "What if a new static route was added to R2 for 10." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show route protocol bgp terse hidden | match 10\\.| 192.168| 172.16.*.*/*", "cmd": "show route protocol bgp terse hidden | match 10\\.| 192.168| 172.16.*.*/*", "desc": "Notice that we now have a more hidden route:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter ?", "cmd": "set term 1 from route-filter ?", "desc": "you go straight to the policy:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term REJECT-10.1.1.128 from route-filter 10.1.1.128/25 exact", "cmd": "set term REJECT-10.1.1.128 from route-filter 10.1.1.128/25 exact", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term REJECT-10.1.1.128 then reject", "cmd": "set term REJECT-10.1.1.128 then reject", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term ROUTE-FILTER-LIST from route-filter-list ROUTE-FILTER-LIST", "cmd": "set term ROUTE-FILTER-LIST from route-filter-list ROUTE-FILTER-LIST", "desc": "NOTE The output looks slightly different because the router is running a different Junos version." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term ROUTE-FILTER-LIST then accept", "cmd": "set term ROUTE-FILTER-LIST then accept", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set 10.0.0.0/8 orlonger reject", "cmd": "set 10.0.0.0/8 orlonger reject", "desc": "And create the route-filter-list where the magic is going to happen:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set 10.1.1.0/24 exact", "cmd": "set 10.1.1.0/24 exact", "desc": "And create the route-filter-list where the magic is going to happen:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show route 10/8 protocol bgp terse hidden", "cmd": "show route 10/8 protocol bgp terse hidden", "desc": "A Destination        P Prf   Metric 1   Metric 2  Next hop         AS path" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term ACCEPT_SOME-SUBNETS from route-filter 10.0.0.0/8 orlonger", "cmd": "set term ACCEPT_SOME-SUBNETS from route-filter 10.0.0.0/8 orlonger", "desc": "as an import policy to BGP:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term ACCEPT_SOME-SUBNETS from route-filter 10.1.1.0/24 exact accept", "cmd": "set term ACCEPT_SOME-SUBNETS from route-filter 10.1.1.0/24 exact accept", "desc": "as an import policy to BGP:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term ACCEPT_SOME-SUBNETS then reject", "cmd": "set term ACCEPT_SOME-SUBNETS then reject", "desc": "as an import policy to BGP:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import ROUTE-FILTER-SOME-SUBNETS", "cmd": "set import ROUTE-FILTER-SOME-SUBNETS", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 10.1.1.0/24 exact", "cmd": "set term 1 from route-filter 10.1.1.0/24 exact", "desc": "We create a new policy that looks like this:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 then local-preference 200", "cmd": "set term 1 then local-preference 200", "desc": "We create a new policy that looks like this:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 2 then metric 300", "cmd": "set term 2 then metric 300", "desc": "We create a new policy that looks like this:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 3 then reject", "cmd": "set term 3 then reject", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import NOT-TERMINATING", "cmd": "set import NOT-TERMINATING", "desc": "We apply the policy and after committing check the routing table again:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term ROUTE-FILTER from route-filter 10.1.1.0/24 orlonger accept", "cmd": "set term ROUTE-FILTER from route-filter 10.1.1.0/24 orlonger accept", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term PREFIX-LIST from prefix-list EXAMPLE-PREFIX-LIST", "cmd": "set term PREFIX-LIST from prefix-list EXAMPLE-PREFIX-LIST", "desc": "Prefix Matching Options Summary" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term PREFIX-LIST from prefix-list-filter EXAMPLE-PREFIXLIST orlonger accept", "cmd": "set term PREFIX-LIST from prefix-list-filter EXAMPLE-PREFIXLIST orlonger accept", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term ROUTE-FILTER-LIST from route-filter-list ROUTE-FILTER-LISTEXAMPLE", "cmd": "set term ROUTE-FILTER-LIST from route-filter-list ROUTE-FILTER-LISTEXAMPLE", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set 10.1.0.0/16 exact accept", "cmd": "set 10.1.0.0/16 exact accept", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set 10.1.0.0/16 longer reject", "cmd": "set 10.1.0.0/16 longer reject", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set 172.16.0.0/12 orlonger", "cmd": "set 172.16.0.0/12 orlonger", "desc": "R1 Receiving Routes" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show route protocol bgp terse 10.1.1/24 exact", "cmd": "show route protocol bgp terse 10.1.1/24 exact", "desc": "in a minute. Pay attention to the values of Metric 1 (100), and Metric 2 (none):" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 10.0.0.0/8 orlonger next term", "cmd": "set term 1 from route-filter 10.0.0.0/8 orlonger next term", "desc": "This time we are going to use the next-term action to achieve the result." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 then local-preference 500", "cmd": "set term 1 then local-preference 500", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 2 then reject", "cmd": "set term 2 then reject", "desc": "Actions – The Then Statement" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show route 10/8 protocol bgp terse", "cmd": "show route 10/8 protocol bgp terse", "desc": "After applying the policy here is what the routing table looks like:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 then metric 20", "cmd": "set term 1 then metric 20", "desc": "We configured the following policy on R2:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export STATIC", "cmd": "set export STATIC", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set area 0.0.0.0 interface fe-0/0/1.0", "cmd": "set area 0.0.0.0 interface fe-0/0/1.0", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set term 1 from protocol ospf", "cmd": "set term 1 from protocol ospf", "desc": "And this policy on R1:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 then metric 25", "cmd": "set term 1 then metric 25", "desc": "And this policy on R1:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import MODIFYING-ACTIONS", "cmd": "set import MODIFYING-ACTIONS", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set area 0.0.0.0 interface fe-0/0/0.0", "cmd": "set area 0.0.0.0 interface fe-0/0/0.0", "desc": "Modifying Actions Example 2" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 10.1.2.0/24 exact", "cmd": "set term 1 from route-filter 10.1.2.0/24 exact", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import ONLY/24", "cmd": "set import ONLY/24", "desc": "Policy Chains" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term last then reject", "cmd": "set term last then reject", "desc": "when a match is not found, unless the last policy applied to the protocol has a term" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import POLICY_3", "cmd": "set import POLICY_3", "desc": "You can apply more than one policy by simply entering the import or export command more than once as shown in this examp…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import POLICY_1", "cmd": "set import POLICY_1", "desc": "You can apply more than one policy by simply entering the import or export command more than once as shown in this examp…" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "delete import", "cmd": "delete import", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import [ POLICY_NEW POLICY_0 POLICY_1 POLICY_2 POLICY_3 ]", "cmd": "set import [ POLICY_NEW POLICY_0 POLICY_1 POLICY_2 POLICY_3 ]", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show | match import", "cmd": "show | match import", "desc": "NOTE This option looks more like what you see when you check the configuration using the curly bracket format:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import FLOW-CONTROL", "cmd": "set import FLOW-CONTROL", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 10.0.0.0/8 orlonger next policy", "cmd": "set term 1 from route-filter 10.0.0.0/8 orlonger next policy", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "set protocols bgp group EBGP import FLOW_CONTROL_1", "cmd": "set protocols bgp group EBGP import FLOW_CONTROL_1", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "set protocols bgp group EBGP import FLOW_CONTROL_2", "cmd": "set protocols bgp group EBGP import FLOW_CONTROL_2", "desc": "Test Scenario for Route Redistribution" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "set static route next-hop ", "cmd": "set static route next-hop ", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "set static route 10/8 next-hop 172.16.2.2", "cmd": "set static route 10/8 next-hop 172.16.2.2", "desc": "the address of the physical interface of a directly connected neighbor." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "set static route 192.168.3.3/32 next-hop 172.16.2.2", "cmd": "set static route 192.168.3.3/32 next-hop 172.16.2.2", "desc": "the address of the physical interface of a directly connected neighbor." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "set static route 0/0 next-hop 172.16.2.1", "cmd": "set static route 0/0 next-hop 172.16.2.1", "desc": "Routing Policies Configuration and Monitoring Examples" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show ospf interface", "cmd": "show ospf interface", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show ospf database | match Extern", "cmd": "show ospf database | match Extern", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show ospf database extensive external", "cmd": "show ospf database extensive external", "desc": "Notice that subnet mask is not displayed." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set ospf area 0.0.0.0 interface fe-0/0/0.0", "cmd": "set ospf area 0.0.0.0 interface fe-0/0/0.0", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set ospf area 0.0.0.0 interface lo0.0 passive", "cmd": "set ospf area 0.0.0.0 interface lo0.0 passive", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set ospf area 0.0.0.0 interface fe-0/0/1.0", "cmd": "set ospf area 0.0.0.0 interface fe-0/0/1.0", "desc": "the loopback interface to demonstrate:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set policy-statement term from ", "cmd": "set policy-statement term from ", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set policy-statement term then ", "cmd": "set policy-statement term then ", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 2 from route-filter 192.168.3.3/32 exact", "cmd": "set term 2 from route-filter 192.168.3.3/32 exact", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set route 10.0.0.0/8 metric 100", "cmd": "set route 10.0.0.0/8 metric 100", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "delete term 1 from prefix-list STATICS", "cmd": "delete term 1 from prefix-list STATICS", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from prefix-list-filter STATICS orlonger", "cmd": "set term 1 from prefix-list-filter STATICS orlonger", "desc": "Interface State     ID               Pri  Dead" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show ospf database", "cmd": "show ospf database", "desc": "The election in this case was based on ID, as if the PRI were the same." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show route protocol ospf", "cmd": "show route protocol ospf", "desc": "The * marks the LSAs generated by the router where you are entering the com-" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 then metric 100", "cmd": "set term 1 then metric 100", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set protocols ospf area 0.0.0.0 interface lo0.0", "cmd": "set protocols ospf area 0.0.0.0 interface lo0.0", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set protocols ospf area 0.0.0.0 interface ge-0/0/1.0", "cmd": "set protocols ospf area 0.0.0.0 interface ge-0/0/1.0", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "set protocols ospf area 0.0.0.0 interface ge-0/0/2.0", "cmd": "set protocols ospf area 0.0.0.0 interface ge-0/0/2.0", "desc": "Load Balancing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set forwarding-table export ", "cmd": "set forwarding-table export ", "desc": "and then we apply the policy under routing-options with:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 then load-balance per-packet", "cmd": "set term 1 then load-balance per-packet", "desc": "and placing them into the forwarding table." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set forwarding-table export load-balance", "cmd": "set forwarding-table export load-balance", "desc": "By Yasmin Lara" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 then tag add 100", "cmd": "set term 1 then tag add 100", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export POLICY-1", "cmd": "set export POLICY-1", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 10.0.0.0/8 orlonger", "cmd": "set term 1 from route-filter 10.0.0.0/8 orlonger", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export POLICY-2", "cmd": "set export POLICY-2", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 10.1.1.0/24 orlonger", "cmd": "set term 1 from route-filter 10.1.1.0/24 orlonger", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 2 from route-filter 10.1.1.128/26 exact", "cmd": "set term 2 from route-filter 10.1.1.128/26 exact", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export POLICY-3", "cmd": "set export POLICY-3", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set from protocol static", "cmd": "set from protocol static", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set from route-filter 10.1.1.128/26 exact", "cmd": "set from route-filter 10.1.1.128/26 exact", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set then metric 100", "cmd": "set then metric 100", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set then accept", "cmd": "set then accept", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export METRIC-DEFAULT", "cmd": "set export METRIC-DEFAULT", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export METRIC-100", "cmd": "set export METRIC-100", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 10.1.1.0/24 longer", "cmd": "set term 1 from route-filter 10.1.1.0/24 longer", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export POLICY-4", "cmd": "set export POLICY-4", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set import POLICY-4", "cmd": "set import POLICY-4", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 15.0.0.0/8 orlonger", "cmd": "set term 1 from route-filter 15.0.0.0/8 orlonger", "desc": "Routing Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show route protocol ospf 10/8 terse | match 10\\.", "cmd": "show route protocol ospf 10/8 terse | match 10\\.", "desc": "Some unexpected routes are present on the receiving side (R1):" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route 10/8 terse | match 10\\.", "cmd": "show route 10/8 terse | match 10\\.", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show route terse protocol bgp | match 15\\.", "cmd": "show route terse protocol bgp | match 15\\.", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show ospf database | match Extern | match 15\\.", "cmd": "show ospf database | match Extern | match 15\\.", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show route protocol ospf terse", "cmd": "show route protocol ospf terse", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export POLICY-5", "cmd": "set export POLICY-5", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export POLICY-6", "cmd": "set export POLICY-6", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "insert term 2 before term 1", "cmd": "insert term 2 before term 1", "desc": "The terms need to be swapped." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "insert export METRIC-100 before METRIC-DEFAULT", "cmd": "insert export METRIC-100 before METRIC-DEFAULT", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "edit protocols ospf]", "cmd": "edit protocols ospf]", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "delete export POLICY-5", "cmd": "delete export POLICY-5", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "delete term 1", "cmd": "delete term 1", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 0 from protocol static", "cmd": "set term 0 from protocol static", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 0 from route-filter 10.1.1.128/26 exact", "cmd": "set term 0 from route-filter 10.1.1.128/26 exact", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 0 then accept", "cmd": "set term 0 then accept", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 10.1.1/24 orlonger", "cmd": "set term 1 from route-filter 10.1.1/24 orlonger", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "insert term 2 after term 1", "cmd": "insert term 2 after term 1", "desc": "Missing Terminating Action" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show ospf database | match extern | match 10\\.", "cmd": "show ospf database | match extern | match 10\\.", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show route protocol ospf terse | match 10\\.", "cmd": "show route protocol ospf terse | match 10\\.", "desc": "The route is now present in the routing table on receiving side (R1):" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 protocol static", "cmd": "set term 1 protocol static", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route 10.1.1.128/26", "cmd": "show route 10.1.1.128/26", "desc": "The route for 10.1.1.128/26 is present on R1 but has the default metric. It should" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show | display set relative | match METRIC", "cmd": "show | display set relative | match METRIC", "desc": "You want to redistribute all subnets of 10." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set policy-statement METRIC-100 from protocol static", "cmd": "set policy-statement METRIC-100 from protocol static", "desc": "You want to redistribute all subnets of 10." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set policy-statement METRIC-100 from route-filter 10.1.1.128/26 exact", "cmd": "set policy-statement METRIC-100 from route-filter 10.1.1.128/26 exact", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set policy-statement METRIC-100 then metric 100", "cmd": "set policy-statement METRIC-100 then metric 100", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set policy-statement METRIC-100 then accept", "cmd": "set policy-statement METRIC-100 then accept", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set policy-statement METRIC-DEFAULT from protocol static", "cmd": "set policy-statement METRIC-DEFAULT from protocol static", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set policy-statement METRIC-DEFAULT from route-filter 10.0.0.0/8 orlonger", "cmd": "set policy-statement METRIC-DEFAULT from route-filter 10.0.0.0/8 orlonger", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set policy-statement METRIC-DEFAULT then accept", "cmd": "set policy-statement METRIC-DEFAULT then accept", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "delete term 1 from route-filter 10.1.1.0/24 longer", "cmd": "delete term 1 from route-filter 10.1.1.0/24 longer", "desc": "with the match type longer first:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "rename route-filter 10.1.1.0/24 longer to route-filter 10.1.1.0/24 orlonger", "cmd": "rename route-filter 10.1.1.0/24 longer to route-filter 10.1.1.0/24 orlonger", "desc": "You can also do this:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show route protocol ospf terse | match 15\\.", "cmd": "show route protocol ospf terse | match 15\\.", "desc": "The 15/8 subnet routes are now present in the routing table on R1:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show route protocol ospf terse | match 150", "cmd": "show route protocol ospf terse | match 150", "desc": "The only OSPF external route present in the routing table on R1 is 10." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set then accept (omitting the term):", "cmd": "set then accept (omitting the term):", "desc": "When you created your policy, instead of typing set term 1 then accept, you typed" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "delete then accept", "cmd": "delete then accept", "desc": "by the accept action outside the term." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term example-1 then accept", "cmd": "set term example-1 then accept", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term example-3 then accept", "cmd": "set term example-3 then accept", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term example-then reject", "cmd": "set term example-then reject", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term example-4 then reject", "cmd": "set term example-4 then reject", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show ospf database | match Extern | match 10.1.1", "cmd": "show ospf database | match Extern | match 10.1.1", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show route protocol ospf terse 10.1.1/24", "cmd": "show route protocol ospf terse 10.1.1/24", "desc": "The route for this additional subnet is present in the routing table on R1:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 1 from route-filter 10.1.1.128/26 exact accept", "cmd": "set term 1 from route-filter 10.1.1.128/26 exact accept", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set term 2 from protocol static", "cmd": "set term 2 from protocol static", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set export POLICY-7", "cmd": "set export POLICY-7", "desc": "Troubleshooting Policies" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "up of cascading branches of related functions commonly used together.", "cmd": "up of cascading branches of related functions commonly used together.", "desc": "chies, as illustrated in Figure 1." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "telnet gatewayserver", "cmd": "telnet gatewayserver", "desc": "2. If necessary, log in to the gateway server with direct access to the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "telnet routername", "cmd": "telnet routername", "desc": "3. Log in to the device:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "configure command:", "cmd": "configure command:", "desc": "To switch from operational mode to configuration mode, issue the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit", "cmd": "edit", "desc": "You can also issue the edit command to enter configuration mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show i", "cmd": "show i", "desc": "pressing the spacebar or tab key lists the possible completions:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "help tip to get tips.", "cmd": "help tip to get tips.", "desc": "For example, you can type help syslog to get help on system logs or" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ?", "cmd": "show ?", "desc": "Display possible completions for the following commands in operational mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis ?", "cmd": "show chassis ?", "desc": "Display possible completions for the following commands in operational mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ?", "cmd": "show interfaces ?", "desc": "Display possible completions for the following commands in operational mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system ?", "cmd": "show system ?", "desc": "Display possible completions for the following commands in operational mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request ?", "cmd": "request ?", "desc": "Display possible completions for the following commands in operational mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request support ?", "cmd": "request support ?", "desc": "Display possible completions for the following commands in operational mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "ping ?", "cmd": "ping ?", "desc": "Display possible completions for the following partially entered commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "traceroute ?", "cmd": "traceroute ?", "desc": "Display possible completions for the following partially entered commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show i ?", "cmd": "show i ?", "desc": "Display possible completions for the following partially entered commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system s ?", "cmd": "request system s ?", "desc": "Display possible completions for the following partially entered commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "restart s ?", "cmd": "restart s ?", "desc": "Display possible completions for the following partially entered commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system license add ?", "cmd": "request system license add ?", "desc": "mark lists the files in the working directory:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system license add /cf/ ?", "cmd": "request system license add /cf/ ?", "desc": "Specifying a path lists the files in that directory:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "help topic interfaces address ?", "cmd": "help topic interfaces address ?", "desc": "Use the help topic command to learn about the usage guidelines for a" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "help reference interfaces address", "cmd": "help reference interfaces address", "desc": "reference command." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Configure the interface address.", "cmd": "Configure the interface address.", "desc": "NOTE The help reference command is similar to UNIX manpages as well as" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route | ?", "cmd": "show route | ?", "desc": "You can query the CLI to find valid ways to pipe a command, as in this" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request Make system-level requests", "cmd": "request Make system-level requests", "desc": "no-more    Don’t paginate output" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request support information | save ", "cmd": "request support information | save ", "desc": "by piping its output to a :" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces terse | count", "cmd": "show interfaces terse | count", "desc": "„„ | count: gives the number of lines in the output:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show cli directory | display xml", "cmd": "show cli directory | display xml", "desc": "„„ | display xml:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration | match at•", "cmd": "show configuration | match at•", "desc": "„„ | match: specify exactly what information you want to display" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system users | except root", "cmd": "show system users | except root", "desc": "„„ | except: displays output that ignores a specific string:" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching interfaces detail", "cmd": "show ethernet-switching interfaces detail", "desc": "display options, such as moving forward and backward in the output," }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Clear all match and except strings: c or C", "cmd": "Clear all match and except strings: c or C", "desc": "---(Help for CLI automore)---" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Delete character over cursor Ctrl+d", "cmd": "Delete character over cursor Ctrl+d", "desc": "Go backward one word Esc+b" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Delete word after cursor Esc+d", "cmd": "Delete word after cursor Esc+d", "desc": "Delete character over cursor Ctrl+d" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Delete word before cursor Esc+backspace", "cmd": "Delete word before cursor Esc+backspace", "desc": "Delete word after cursor Esc+d" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Delete text from the cursor to end of the line Ctrl+k", "cmd": "Delete text from the cursor to end of the line Ctrl+k", "desc": "Delete word before cursor Esc+backspace" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set s?", "cmd": "set s?", "desc": "known as context-sensitive help in Junos OS lingo:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "help apropos host-name", "cmd": "help apropos host-name", "desc": "strings that are displayed for these:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system host-name ", "cmd": "set system host-name ", "desc": "strings that are displayed for these:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "set system static-host-mapping ", "cmd": "set system static-host-mapping ", "desc": "Hostname for this router" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "set system services dhcp static-binding host-name ", "cmd": "set system services dhcp static-binding host-name ", "desc": "Fully qualified name of system" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog host", "cmd": "set system syslog host", "desc": "Hostname for this client" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set interfaces services-options syslog host ", "cmd": "set interfaces services-options syslog host ", "desc": "set system syslog host" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set accounting-options routing-engine-profile fields host-name", "cmd": "set accounting-options routing-engine-profile fields host-name", "desc": "Name of host to notify" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set services l2tp tunnel-group syslog host ", "cmd": "set services l2tp tunnel-group syslog host ", "desc": "Hostname for this router" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set services service-set syslog host ", "cmd": "set services service-set syslog host ", "desc": "Name of host to notify" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Save output to a file: s or S ", "cmd": "Save output to a file: s or S ", "desc": "Repeat last search:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "exit configuration-mode", "cmd": "exit configuration-mode", "desc": "ration session to enter operational mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Exit with uncommitted changes? [yes,no]", "cmd": "Exit with uncommitted changes? [yes,no]", "desc": "The configuration has been changed but not committed" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear Clear information in the system", "cmd": "clear Clear information in the system", "desc": "truncated listing of its most commonly used commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "configure Manipulate software configuration information", "cmd": "configure Manipulate software configuration information", "desc": "clear\t\t Clear information in the system" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor Show real-time debugging information", "cmd": "monitor Show real-time debugging information", "desc": "help\t\t Provide help information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "ping Ping remote target", "cmd": "ping Ping remote target", "desc": "monitor\t\t Show real-time debugging information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "restart Restart software process", "cmd": "restart Restart software process", "desc": "request\t\t Make system-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show Show system information", "cmd": "show Show system information", "desc": "set\t\t Set CLI properties, date/time, craft interface message" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "ssh Start secure shell on another host", "cmd": "ssh Start secure shell on another host", "desc": "show\t\t Show system information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "telnet Telnet to another host", "cmd": "telnet Telnet to another host", "desc": "ssh\t\t Start secure shell on another host" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "test Perform diagnostic debugging", "cmd": "test Perform diagnostic debugging", "desc": "telnet\t\t Telnet to another host" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "traceroute Trace route to remote host", "cmd": "traceroute Trace route to remote host", "desc": "test\t\t Perform diagnostic debugging" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces fe-1/1/1 ?", "cmd": "show interfaces fe-1/1/1 ?", "desc": "faces command for the fe-1/1/1 Fast Ethernet interface:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces fe-1/1/1 brief", "cmd": "show interfaces fe-1/1/1 brief", "desc": "terse to the command:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces fe-1/1/1 terse", "cmd": "show interfaces fe-1/1/1 terse", "desc": "Link flags    : None" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file show ", "cmd": "file show ", "desc": "instance). To view a file use the file show command:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file copy /target-directory/target-filename /destination-directory/destination-", "cmd": "file copy /target-directory/target-filename /destination-directory/destination-", "desc": "uses the same syntax as the standard UNIX cp command:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file copy /config/juniper.conf.gz /var/home/user/backup.gz", "cmd": "file copy /config/juniper.conf.gz /var/home/user/backup.gz", "desc": "juniper.conf.gz) as backup.gz to the device’s /var/home/user directory:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file copy username@server-host-name:/config/juniper.config.gz /", "cmd": "file copy username@server-host-name:/config/juniper.config.gz /", "desc": "you would move the configuration file from the server back to the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file list /var/tmp", "cmd": "file list /var/tmp", "desc": "not in your home directory (and you have access to the folder):" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis fpc slot 0 restart", "cmd": "request chassis fpc slot 0 restart", "desc": "components without having to reboot the entire device:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc", "cmd": "show chassis fpc", "desc": "Restart initiated, use “show chassis fpc” to verify" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "deactivate protocols ospf", "cmd": "deactivate protocols ospf", "desc": "entire routing daemon of Junos, which would affect all the routing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "configure private", "cmd": "configure private", "desc": "private switch to the configure command:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | compare command.", "cmd": "show | compare command.", "desc": "configured differences between two configurations with the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Telnet access and removing SSH and J-Web access:", "cmd": "Telnet access and removing SSH and J-Web access:", "desc": "The following example modifies a candidate configuration by enabling" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear system commit", "cmd": "clear system commit", "desc": "the clear system commit command:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system services finger", "cmd": "set system services finger", "desc": "issue the following series of set commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system services ftp", "cmd": "set system services ftp", "desc": "issue the following series of set commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system services ssh", "cmd": "set system services ssh", "desc": "issue the following series of set commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system services telnet", "cmd": "set system services telnet", "desc": "issue the following series of set commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set finger", "cmd": "set finger", "desc": "then issue the following commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set ftp", "cmd": "set ftp", "desc": "then issue the following commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set ssh", "cmd": "set ssh", "desc": "then issue the following commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set telnet", "cmd": "set telnet", "desc": "then issue the following commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "edit system syslog host log", "cmd": "edit system syslog host log", "desc": "chy, you could issue the following command from the top level of the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "run show configuration", "cmd": "run show configuration", "desc": "in configuration mode by adding the keyword run:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit system services", "cmd": "edit system services", "desc": "indicate your new location in the hierarchy:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "edit syslog", "cmd": "edit syslog", "desc": "succession of edit commands:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set services telnet", "cmd": "set services telnet", "desc": "Telnet access and removing SSH and J-Web access:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete services web-management", "cmd": "delete services web-management", "desc": "Telnet access and removing SSH and J-Web access:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete services ssh", "cmd": "delete services ssh", "desc": "Now, display the resulting changes in the candidate compared to the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit host log", "cmd": "edit host log", "desc": "Discovering Configuration Mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "top edit system login", "cmd": "top edit system login", "desc": "quickly to a different part of the configuration hierarchy:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "top show system services", "cmd": "top show system services", "desc": "another section of the hierarchy:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system host-name juniper1", "cmd": "set system host-name juniper1", "desc": "required. For example, to set the device name to juniper1, enter the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-1/0/0 unit 0 family inet address 10.210.1.0/24", "cmd": "set interfaces ge-1/0/0 unit 0 family inet address 10.210.1.0/24", "desc": "1. Enter the following set command at the top level of the configuration hierarchy:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete interfaces ge-1/0/0", "cmd": "delete interfaces ge-1/0/0", "desc": "3. Delete the interface using the following delete command:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "annotate command with an empty string:", "cmd": "annotate command with an empty string:", "desc": "single-line, comment associated with it." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "annotate system “ ”", "cmd": "annotate system “ ”", "desc": "annotate command with an empty string:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "up and running on the device:", "cmd": "up and running on the device:", "desc": "The commit complete message tells you that the new configuration is" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit confirmed", "cmd": "commit confirmed", "desc": "want a safety net against potential configuration problems:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit confirmed 2", "cmd": "commit confirmed 2", "desc": "adding a wait time (a number, in minutes) to the command:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rollback 1", "cmd": "rollback 1", "desc": "to the most recent previous configuration file using the rollback 1" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | compare rollback 2", "cmd": "show | compare rollback 2", "desc": "configuration and a rollback file, investigate it with the show | compare" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rollback ?", "cmd": "rollback ?", "desc": "<[Enter]>              Execute this command" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "copy xe-0/0/2 to xe-0/0/1", "cmd": "copy xe-0/0/2 to xe-0/0/1", "desc": "newly created interface xe-0/0/1, for example, you might change its" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete xe-0/0/1 unit 0 family inet address 10.0.24.13/30", "cmd": "delete xe-0/0/1 unit 0 family inet address 10.0.24.13/30", "desc": "newly created interface xe-0/0/1, for example, you might change its" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set xe-0/0/1 unit 0 family inet address 10.0.36.2/30", "cmd": "set xe-0/0/1 unit 0 family inet address 10.0.36.2/30", "desc": "address for the new interface:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rename fe-4/0/2 unit 0 family inet address", "cmd": "rename fe-4/0/2 unit 0 family inet address", "desc": "Use the rename command to change the value to 10." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit interfaces fe-3/0/0 unit 0", "cmd": "edit interfaces fe-3/0/0 unit 0", "desc": "example, which could be installed tomorrow:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set family inet address 192.168.1.254/24", "cmd": "set family inet address 192.168.1.254/24", "desc": "example, which could be installed tomorrow:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit at 02:00:00", "cmd": "commit at 02:00:00", "desc": "command provides this option:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit check succeeds", "cmd": "commit check succeeds", "desc": "command provides this option:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "edit protocols bgp group internal", "cmd": "edit protocols bgp group internal", "desc": "until the session is ready to be introduced:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set neighbor 192.168.1.1", "cmd": "set neighbor 192.168.1.1", "desc": "until the session is ready to be introduced:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "deactivate neighbor 192.168.1.1", "cmd": "deactivate neighbor 192.168.1.1", "desc": "Discovering Configuration Mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "activate neighbor 192.168.1.1", "cmd": "activate neighbor 192.168.1.1", "desc": "that portion of the configuration, and the device will begin using it:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "deactivate group internal", "cmd": "deactivate group internal", "desc": "vate the entire group of BGP neighbors called internal:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces", "cmd": "show interfaces", "desc": "58 Day One: Exploring the Junos OS CLI, Second Edition" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rename interfaces fe-2/0/1 to fe-2/0/0", "cmd": "rename interfaces fe-2/0/1 to fe-2/0/0", "desc": "The following moves the port in the candidate file:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "exit the session:", "cmd": "exit the session:", "desc": "device discards all non-committed changes to the configuration once you" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "SSH and Telnet (See Chapter 7).", "cmd": "SSH and Telnet (See Chapter 7).", "desc": "management interface over the network using standard utilities such as" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Configure the Junos OS to use one or more DNS servers.", "cmd": "Configure the Junos OS to use one or more DNS servers.", "desc": "How to configure the DNS server:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show host 172.26.27.44", "cmd": "show host 172.26.27.44", "desc": "resolution to the configured hostname:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show host juniper1", "cmd": "show host juniper1", "desc": "resolution to the IP address:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system ?", "cmd": "set system ?", "desc": "reminder of the basic settings that you can configure:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system services ssh root-login deny", "cmd": "set system services ssh root-login deny", "desc": "BEST PRACTICE Strengthen security by only allowing root access from the console port:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces lo0 unit 0 family inet address 192.26.0.110/32", "cmd": "set interfaces lo0 unit 0 family inet address 192.26.0.110/32", "desc": "reminder of what you have chosen as the IP address of your loopback" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces lo0 unit 0 family inet address 192.26.0.110/32 preferred", "cmd": "set interfaces lo0 unit 0 family inet address 192.26.0.110/32 preferred", "desc": "it’s good practice to make one address preferred:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces lo0 unit 0 family inet address 192.168.1.1/32", "cmd": "set interfaces lo0 unit 0 family inet address 192.168.1.1/32", "desc": "unit 0, without the preferred option:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces lo0 unit 0 family inet address 192.168.2.1/32", "cmd": "set interfaces lo0 unit 0 family inet address 192.168.2.1/32", "desc": "unit 0, without the preferred option:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces lo0 unit 0 family inet address 127.0.0.1/32", "cmd": "set interfaces lo0 unit 0 family inet address 127.0.0.1/32", "desc": "configured, as certain processes such as NTP and MPLS ping use this" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces lo0 unit 0 family iso address 49.0026.0000.0000.0110.00", "cmd": "set interfaces lo0 unit 0 family iso address 49.0026.0000.0000.0110.00", "desc": "address for the IS-IS routing protocol:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces me0 unit 0 family inet address 172.26.27.44/24", "cmd": "set interfaces me0 unit 0 family inet address 172.26.27.44/24", "desc": "Switches use the interface name me0 as the name of the management" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/0 unit 0 family inet address 172.26.27.44/24", "cmd": "set interfaces ge-0/0/0 unit 0 family inet address 172.26.27.44/24", "desc": "1. Configure the interface with the IP address that you are using for" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "set security zone functional-zone management interfaces ge-0/0/0.0", "cmd": "set security zone functional-zone management interfaces ge-0/0/0.0", "desc": "to this zone with the following command:" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "set security zone functional-zone management host-inbound-", "cmd": "set security zone functional-zone management host-inbound-", "desc": "which protocols the interface responds to, for example:" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "set security zone security-zone trust interfaces ge-0/0/0.0", "cmd": "set security zone security-zone trust interfaces ge-0/0/0.0", "desc": "logical interface to this zone with the following command:" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "set security zone security-zone trust host-inbound-traffic system-", "cmd": "set security zone security-zone trust host-inbound-traffic system-", "desc": "3. Specify which protocols the interface in the trust zone responds to," }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system backup-router 172.26.31.1 destination 172.16.0.0/12", "cmd": "set system backup-router 172.26.31.1 destination 172.16.0.0/12", "desc": "during boot time, thereby minimizing the amount of time the device is" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system name-server 172.26.27.2", "cmd": "set system name-server 172.26.27.2", "desc": "1. Begin by including the IP address(es) of your DNS server(s)within a" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system name-server 172.26.27.3", "cmd": "set system name-server 172.26.27.3", "desc": "1. Begin by including the IP address(es) of your DNS server(s)within a" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system domain-name enterprise.com", "cmd": "set system domain-name enterprise.com", "desc": "as the default domain name to append to hostnames that are not fully" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system domain-search [enterprise.com department.enterprise.com]", "cmd": "set system domain-search [enterprise.com department.enterprise.com]", "desc": "searching for the IP address of a host:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set date 200901011200.00", "cmd": "set date 200901011200.00", "desc": "ally configure the date and time from operational mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "set system ntp boot-server 172.26.27.4", "cmd": "set system ntp boot-server 172.26.27.4", "desc": "with the IP address of your NTP server:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "set system ntp server 172.26.27.4", "cmd": "set system ntp server 172.26.27.4", "desc": "long time, and therefore the clock can drift:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system time-zone Europe/Amsterdam", "cmd": "set system time-zone Europe/Amsterdam", "desc": "change several times throughout the year:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "set date ntp 172.26.27.4", "cmd": "set date ntp 172.26.27.4", "desc": "with a remote time source, here’s how to do so in operational mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "set interfaces ge-0/0/1 unit 0 family inet address 192.168.100.1/30", "cmd": "set interfaces ge-0/0/1 unit 0 family inet address 192.168.100.1/30", "desc": "the IPv4 address 192." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show log messages", "cmd": "show log messages", "desc": "need to first configure system logging, as described in Chapter 8:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system connections", "cmd": "show system connections", "desc": "VERIFY Show the SSH session connections:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file show /var/log/messages", "cmd": "file show /var/log/messages", "desc": "ticates locally (passing the login criteria):" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system login message “ Welcome \\n to the\\n Junos OS Training\\n “’", "cmd": "set system login message “ Welcome \\n to the\\n Junos OS Training\\n “’", "desc": "by using \\n, or newline (equivalent to a carriage return and line feed) as" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system login announcement “Maintenance scheduled 11PM to 2AM", "cmd": "set system login announcement “Maintenance scheduled 11PM to 2AM", "desc": "window to authorized users:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit system login", "cmd": "edit system login", "desc": "1. To begin setup, navigate to the [edit system login] section of the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit user jadmin", "cmd": "edit user jadmin", "desc": "creates a new user with username jadmin:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set full-name “Juniper Network Administrator”", "cmd": "set full-name “Juniper Network Administrator”", "desc": "full name includes spaces, enclose the entire name in quotes:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set uid 1250", "cmd": "set uid 1250", "desc": "number in the range of 100 to 64000." }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set authentication plain-text-password", "cmd": "set authentication plain-text-password", "desc": "set command to create a password as plain text, and the Junos OS" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set class super-user", "cmd": "set class super-user", "desc": "super-user. You should always have at least one super-user set up locally" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login class netops", "cmd": "set system login class netops", "desc": "1. Create a custom login class just for network operations staff that you" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login class netops permissions all", "cmd": "set system login class netops permissions all", "desc": "allow or deny, but here let’s keep things simple by giving the netops class" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system radius-server 172.26.27.5", "cmd": "set system radius-server 172.26.27.5", "desc": "1. Enter the RADIUS configuration statement:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system radius-server 172.26.27.5 port 1845", "cmd": "set system radius-server 172.26.27.5 port 1845", "desc": "if necessary, the port number:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system radius-server 172.26.27.5 secret Jun1p3r", "cmd": "set system radius-server 172.26.27.5 secret Jun1p3r", "desc": "if necessary, the port number:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system authentication-order radius", "cmd": "set system authentication-order radius", "desc": "3. Set the authentication order to include RADIUS:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login user adminjlk class super-user", "cmd": "set system login user adminjlk class super-user", "desc": "defaults to the settings of the remote template:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system login user remote class super-user", "cmd": "set system login user remote class super-user", "desc": "defaults to the settings of the remote template:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system tacplus-server 172.26.27.6", "cmd": "set system tacplus-server 172.26.27.6", "desc": "1. Enter the TACACS+ configuration statement:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system tacplus-server 172.26.27.6 port 49", "cmd": "set system tacplus-server 172.26.27.6 port 49", "desc": "number, in the command statement:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system tacplus-server 172.26.27.6 secret Jun1p3r", "cmd": "set system tacplus-server 172.26.27.6 secret Jun1p3r", "desc": "number, in the command statement:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system authentication-order tacplus", "cmd": "set system authentication-order tacplus", "desc": "3. Set the authentication-order to include TACACS+:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "set system authentication-order [ radius tacplus password ]", "cmd": "set system authentication-order [ radius tacplus password ]", "desc": "establish a sequential authentication order:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "ssh juniper1", "cmd": "ssh juniper1", "desc": "if the remote client is using SSH:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "help reference system syslog", "cmd": "help reference system syslog", "desc": "the following operational command:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show log all-messages | last 10", "cmd": "show log all-messages | last 10", "desc": "messages that are stored in a local file in operational mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "edit system syslog file all-messages", "cmd": "edit system syslog file all-messages", "desc": "1. Enter the file statement in the [edit system syslog] hierarchy of the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set any warning", "cmd": "set any warning", "desc": "1. Enter the file statement in the [edit system syslog] hierarchy of the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set authorization notice", "cmd": "set authorization notice", "desc": "1. Enter the file statement in the [edit system syslog] hierarchy of the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog user jadmin any critical", "cmd": "set system syslog user jadmin any critical", "desc": "1. Enter the user name in the [system syslog user] hierarchy:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog console any error", "cmd": "set system syslog console any error", "desc": "any facility at the level of error and above to the device’s console:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog host loghost any notice", "cmd": "set system syslog host loghost any notice", "desc": "log host] hierarchy of the configuration:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "set system syslog host loghost log-prefix JUNOS", "cmd": "set system syslog host loghost log-prefix JUNOS", "desc": "before it is forwarded to the remote device loghost:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set explicit-priority", "cmd": "set explicit-priority", "desc": "explicit-priority statement in the [system syslog host] or [system" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set facility-override local7", "cmd": "set facility-override local7", "desc": "statement when configuring the syslog host:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces so-0/0/0", "cmd": "show interfaces so-0/0/0", "desc": "have a SONET/SDH interface configured like this:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set groups SDH interfaces framing sdh", "cmd": "set groups SDH interfaces framing sdh", "desc": "1. Configure the group and set the required parameters:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set groups SDH interfaces sonet-options rfc-2615", "cmd": "set groups SDH interfaces sonet-options rfc-2615", "desc": "set groups SDH interfaces framing sdh" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set apply-groups SDH", "cmd": "set apply-groups SDH", "desc": "could also apply the group at the interface level:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces so-0/0/0 | display inheritance", "cmd": "show interfaces so-0/0/0 | display inheritance", "desc": "show the full configuration with the applied SDH group:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "set interfaces ge-0/0/1 apply-groups-except ISIS-MPLS", "cmd": "set interfaces ge-0/0/1 apply-groups-except ISIS-MPLS", "desc": "group within a specific part of the configuration:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "edit groups common", "cmd": "edit groups common", "desc": "it into a file, and provide a file name as an argument:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "save common-template", "cmd": "save common-template", "desc": "it into a file, and provide a file name as an argument:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load merge common-template", "cmd": "load merge common-template", "desc": "into the device’s configuration:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load merge ftp://user:password@server/junos/templates/common-template", "cmd": "load merge ftp://user:password@server/junos/templates/common-template", "desc": "FTP server, you would enter its location as a URL:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "save the active configuration file at specific intervals, or upon every", "cmd": "save the active configuration file at specific intervals, or upon every", "desc": "devices. Additionally, you can configure the Junos OS to automatically" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "save router-config", "cmd": "save router-config", "desc": "simply save to a filename in configuration mode:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "run file show router-config", "cmd": "run file show router-config", "desc": "Use the file show command to view the actual contents of your saved" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "save system-login", "cmd": "save system-login", "desc": "could use the same system login information for all the switches in your" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "save scp://jadmin@remot", "cmd": "save scp://jadmin@remot", "desc": "remot, using SCP (secure copy) to transport it:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "run show configuration | save Tuesday-archive", "cmd": "run show configuration | save Tuesday-archive", "desc": "locally-stored file called Tuesday-archive:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system archival configuration archive-sites ftp://", "cmd": "set system archival configuration archive-sites ftp://", "desc": "where to send the configuration:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system archival configuration transfer interval 1440", "cmd": "set system archival configuration transfer interval 1440", "desc": "from 15 minutes (900 seconds) up to 48 hours (2880 seconds):" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set system archival configuration transfer-on-commit", "cmd": "set system archival configuration transfer-on-commit", "desc": "2. Configure it to transfer the active configuration after every commit:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load override", "cmd": "load override", "desc": "how the Junos OS integrates the loaded file into your candidate" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load override /var/tmp/router-config", "cmd": "load override /var/tmp/router-config", "desc": "to the /var/tmp directory on the device, completely overwriting the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load merge", "cmd": "load merge", "desc": "configuration. You must enter a commit command for it to become the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load merge system-login", "cmd": "load merge system-login", "desc": "saved previously in the local directory of the device:" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load merge terminal", "cmd": "load merge terminal", "desc": "104 Day One: Exploring the Junos OS CLI, Second Edition" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "load merge terminal relative", "cmd": "load merge terminal relative", "desc": "The new syslog statements are now ready to be applied to your" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "edit system syslog", "cmd": "edit system syslog", "desc": "On the destination device, navigate to the desired section of the" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "commit.", "cmd": "commit.", "desc": "save the active configuration file at specific intervals, or upon every" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show (ospf | ospf3) backup coverage", "cmd": "show (ospf | ospf3) backup coverage", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show (ospf | ospf3) backup lsp", "cmd": "show (ospf | ospf3) backup lsp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show (ospf | ospf3) backup neighbor", "cmd": "show (ospf | ospf3) backup neighbor", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show (ospf | ospf3) backup spf", "cmd": "show (ospf | ospf3) backup spf", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show (ospf | ospf3) bgp-orr", "cmd": "show (ospf | ospf3) bgp-orr", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show (ospf | ospf3) interface", "cmd": "show (ospf | ospf3) interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show (ospf | ospf3) io-statistics", "cmd": "show (ospf | ospf3) io-statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show (ospf | ospf3) log", "cmd": "show (ospf | ospf3) log", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show (ospf | ospf3) overview", "cmd": "show (ospf | ospf3) overview", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show (ospf | ospf3) route", "cmd": "show (ospf | ospf3) route", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show access-cac interface-set", "cmd": "show access-cac interface-set", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show access-security router", "cmd": "show access-security router", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show access-security routeradvertisement state", "cmd": "show access-security routeradvertisement state", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show access-security slaacsnooping binding", "cmd": "show access-security slaacsnooping binding", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show access-security slaacsnooping state", "cmd": "show access-security slaacsnooping state", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show access-security slaacsnooping statistics", "cmd": "show access-security slaacsnooping statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show accounting pendingaccounting-stops", "cmd": "show accounting pendingaccounting-stops", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show accounting profile", "cmd": "show accounting profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show agent sensors", "cmd": "show agent sensors", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show amt tunnel", "cmd": "show amt tunnel", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show analyzer", "cmd": "show analyzer", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ancp cos", "cmd": "show ancp cos", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ancp neighbor", "cmd": "show ancp neighbor", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ancp summary", "cmd": "show ancp summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show arp", "cmd": "show arp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show as-path domain", "cmd": "show as-path domain", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show auto-bandwidth", "cmd": "show auto-bandwidth", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show backup-selection", "cmd": "show backup-selection", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show bfd session", "cmd": "show bfd session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show bfd subscriber session", "cmd": "show bfd subscriber session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show bgp bmp", "cmd": "show bgp bmp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show bgp group", "cmd": "show bgp group", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show bgp neighbor", "cmd": "show bgp neighbor", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show bgp replication", "cmd": "show bgp replication", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show bgp replication logicalsystem", "cmd": "show bgp replication logicalsystem", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show bridge domain", "cmd": "show bridge domain", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show bridge flood", "cmd": "show bridge flood", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show bridge flood satellite", "cmd": "show bridge flood satellite", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show bridge mac-ip-table", "cmd": "show bridge mac-ip-table", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show bridge statistics", "cmd": "show bridge statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show captive-portal firewall", "cmd": "show captive-portal firewall", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show captive-portal interface", "cmd": "show captive-portal interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis adc (GNF)", "cmd": "show chassis adc (GNF)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis afeb", "cmd": "show chassis afeb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis alarms", "cmd": "show chassis alarms", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis alarms (Security)", "cmd": "show chassis alarms (Security)", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "show chassis cluster control-plane statistics", "cmd": "show chassis cluster control-plane statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "show chassis cluster controlinterface status", "cmd": "show chassis cluster controlinterface status", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "show chassis cluster data-plane interfaces", "cmd": "show chassis cluster data-plane interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "show chassis cluster data-plane statistics", "cmd": "show chassis cluster data-plane statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "show chassis cluster ethernetswitching interfaces", "cmd": "show chassis cluster ethernetswitching interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "show chassis cluster ethernetswitching status", "cmd": "show chassis cluster ethernetswitching status", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "show chassis cluster information configuration-synchronization", "cmd": "show chassis cluster information configuration-synchronization", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "show chassis cluster information issu", "cmd": "show chassis cluster information issu", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "show chassis cluster interfaces", "cmd": "show chassis cluster interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "show chassis cluster ip-monitoring status redundancy-group", "cmd": "show chassis cluster ip-monitoring status redundancy-group", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis craft-interface", "cmd": "show chassis craft-interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis dedicated-ukerncpu", "cmd": "show chassis dedicated-ukerncpu", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis device-mode", "cmd": "show chassis device-mode", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis enhancedtemperature-thresholds", "cmd": "show chassis enhancedtemperature-thresholds", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment adc", "cmd": "show chassis environment adc", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment cb", "cmd": "show chassis environment cb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment cb (Security)", "cmd": "show chassis environment cb (Security)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment ccg", "cmd": "show chassis environment ccg", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment fan", "cmd": "show chassis environment fan", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment fpc", "cmd": "show chassis environment fpc", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment fpm", "cmd": "show chassis environment fpm", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment mcs", "cmd": "show chassis environment mcs", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment monitored", "cmd": "show chassis environment monitored", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment pcg", "cmd": "show chassis environment pcg", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment pdu", "cmd": "show chassis environment pdu", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment pem", "cmd": "show chassis environment pem", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment powersupply-unit", "cmd": "show chassis environment powersupply-unit", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment psm", "cmd": "show chassis environment psm", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment psu", "cmd": "show chassis environment psu", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment routingengine", "cmd": "show chassis environment routingengine", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment scg", "cmd": "show chassis environment scg", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment sfb", "cmd": "show chassis environment sfb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment sfm", "cmd": "show chassis environment sfm", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis environment sib", "cmd": "show chassis environment sib", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis errors active", "cmd": "show chassis errors active", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis ethernet-switch (Security)", "cmd": "show chassis ethernet-switch (Security)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis ethernet-switch interconnect-device cb", "cmd": "show chassis ethernet-switch interconnect-device cb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fabric degradation actions", "cmd": "show chassis fabric degradation actions", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fabric degradedfabric-reachability", "cmd": "show chassis fabric degradedfabric-reachability", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fabric device", "cmd": "show chassis fabric device", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fabric errors", "cmd": "show chassis fabric errors", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fabric feb", "cmd": "show chassis fabric feb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fabric plane", "cmd": "show chassis fabric plane", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fabric redundancymode", "cmd": "show chassis fabric redundancymode", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fabric sibs", "cmd": "show chassis fabric sibs", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fabric summary", "cmd": "show chassis fabric summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fabric topology", "cmd": "show chassis fabric topology", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fabric unreachabledestinations", "cmd": "show chassis fabric unreachabledestinations", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fan", "cmd": "show chassis fan", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis feb", "cmd": "show chassis feb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis firmware", "cmd": "show chassis firmware", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc (View)", "cmd": "show chassis fpc (View)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc global pfe-id", "cmd": "show chassis fpc global pfe-id", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc optical-properties alarms", "cmd": "show chassis fpc optical-properties alarms", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc optical-properties amplifier-chain ila alarms", "cmd": "show chassis fpc optical-properties amplifier-chain ila alarms", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc optical-properties amplifier-chain ila pm-interval", "cmd": "show chassis fpc optical-properties amplifier-chain ila pm-interval", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc optical-properties amplifier-chain ila pm-previousday", "cmd": "show chassis fpc optical-properties amplifier-chain ila pm-previousday", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc optical-properties amplifier-chain ila voa", "cmd": "show chassis fpc optical-properties amplifier-chain ila voa", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc optical-properties mfg-info", "cmd": "show chassis fpc optical-properties mfg-info", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc optical-properties ocm", "cmd": "show chassis fpc optical-properties ocm", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc optical-properties pm-interval", "cmd": "show chassis fpc optical-properties pm-interval", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc optical-properties status", "cmd": "show chassis fpc optical-properties status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc optical-properties topology", "cmd": "show chassis fpc optical-properties topology", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc opticalproperties amplifier-chain ila pmcurrentday", "cmd": "show chassis fpc opticalproperties amplifier-chain ila pmcurrentday", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc opticalproperties edfa", "cmd": "show chassis fpc opticalproperties edfa", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc opticalproperties pm-current", "cmd": "show chassis fpc opticalproperties pm-current", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc opticalproperties pm-previousday", "cmd": "show chassis fpc opticalproperties pm-previousday", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis fpc pic-status (Node Slicing)", "cmd": "show chassis fpc pic-status (Node Slicing)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis gnf", "cmd": "show chassis gnf", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis hardware (GNF)", "cmd": "show chassis hardware (GNF)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis hardware (View)", "cmd": "show chassis hardware (View)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis high-availability information", "cmd": "show chassis high-availability information", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis high-availability peerinfo", "cmd": "show chassis high-availability peerinfo", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis high-availability prefix-srgid-table", "cmd": "show chassis high-availability prefix-srgid-table", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis high-availability services-redundancy-group", "cmd": "show chassis high-availability services-redundancy-group", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis interoperability", "cmd": "show chassis interoperability", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis jnu satellite", "cmd": "show chassis jnu satellite", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis led satellite", "cmd": "show chassis led satellite", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis location", "cmd": "show chassis location", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis network-services", "cmd": "show chassis network-services", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis network-slices", "cmd": "show chassis network-slices", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis nonstop-upgrade", "cmd": "show chassis nonstop-upgrade", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis nonstop-upgrade node-group", "cmd": "show chassis nonstop-upgrade node-group", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis oss-map", "cmd": "show chassis oss-map", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis pic", "cmd": "show chassis pic", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis pic-mode", "cmd": "show chassis pic-mode", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis power", "cmd": "show chassis power", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis power sequence", "cmd": "show chassis power sequence", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis psd", "cmd": "show chassis psd", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis realtime-ukernthread", "cmd": "show chassis realtime-ukernthread", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis redundancy feb", "cmd": "show chassis redundancy feb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis redundant-powersystem", "cmd": "show chassis redundant-powersystem", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis reswatch", "cmd": "show chassis reswatch", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis routing-engine", "cmd": "show chassis routing-engine", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite", "cmd": "show chassis satellite", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite extendedport", "cmd": "show chassis satellite extendedport", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite interface", "cmd": "show chassis satellite interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite neighbor", "cmd": "show chassis satellite neighbor", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite powerbudget-statistics", "cmd": "show chassis satellite powerbudget-statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite redundancygroup", "cmd": "show chassis satellite redundancygroup", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite redundancygroup devices", "cmd": "show chassis satellite redundancygroup devices", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite software", "cmd": "show chassis satellite software", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite statistics", "cmd": "show chassis satellite statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite upgradegroup", "cmd": "show chassis satellite upgradegroup", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite-cluster", "cmd": "show chassis satellite-cluster", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis satellite-cluster statistics", "cmd": "show chassis satellite-cluster statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis scb", "cmd": "show chassis scb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis scb-ha-port", "cmd": "show chassis scb-ha-port", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis sfb errors", "cmd": "show chassis sfb errors", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis sfm", "cmd": "show chassis sfm", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis sibs", "cmd": "show chassis sibs", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis spmb sibs", "cmd": "show chassis spmb sibs", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis ssb", "cmd": "show chassis ssb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis synchronization", "cmd": "show chassis synchronization", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis synchronization (MX Series Routers)", "cmd": "show chassis synchronization (MX Series Routers)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Logging", "title": "show chassis synchronization memory-logging", "cmd": "show chassis synchronization memory-logging", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis temperaturethresholds", "cmd": "show chassis temperaturethresholds", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis temperaturethresholds (Security)", "cmd": "show chassis temperaturethresholds (Security)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show chassis usb storage", "cmd": "show chassis usb storage", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service", "cmd": "show class-of-service", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service adjustmentcontrol-profile", "cmd": "show class-of-service adjustmentcontrol-profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service applicationtraffic-control counter", "cmd": "show class-of-service applicationtraffic-control counter", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service classifier", "cmd": "show class-of-service classifier", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service code-pointaliases", "cmd": "show class-of-service code-pointaliases", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service congestionnotification", "cmd": "show class-of-service congestionnotification", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service dedicatedbuffer-profile", "cmd": "show class-of-service dedicatedbuffer-profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service fabric scheduler-map", "cmd": "show class-of-service fabric scheduler-map", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service fabric statistics", "cmd": "show class-of-service fabric statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service forwardingclass", "cmd": "show class-of-service forwardingclass", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service forwardingclass-set", "cmd": "show class-of-service forwardingclass-set", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service forwardingtable classifier mapping", "cmd": "show class-of-service forwardingtable classifier mapping", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service forwardingtable drop-profile", "cmd": "show class-of-service forwardingtable drop-profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service forwardingtable fabric scheduler-map", "cmd": "show class-of-service forwardingtable fabric scheduler-map", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service forwardingtable scheduler-map", "cmd": "show class-of-service forwardingtable scheduler-map", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service forwardingtable slice", "cmd": "show class-of-service forwardingtable slice", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service forwardingtable slice mapping", "cmd": "show class-of-service forwardingtable slice mapping", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service forwardingtable traffic-class-map", "cmd": "show class-of-service forwardingtable traffic-class-map", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service fragmentation-map", "cmd": "show class-of-service fragmentation-map", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service interface", "cmd": "show class-of-service interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service interfaceset", "cmd": "show class-of-service interfaceset", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service loss-priorityrewrite", "cmd": "show class-of-service loss-priorityrewrite", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service monitoringprofile", "cmd": "show class-of-service monitoringprofile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service multidestination", "cmd": "show class-of-service multidestination", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service routinginstance", "cmd": "show class-of-service routinginstance", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service schedulerhierarchy interface", "cmd": "show class-of-service schedulerhierarchy interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service schedulerhierarchy interface-set", "cmd": "show class-of-service schedulerhierarchy interface-set", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service schedulermap-forwarding-class-sets", "cmd": "show class-of-service schedulermap-forwarding-class-sets", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service sharedbuffer", "cmd": "show class-of-service sharedbuffer", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service slice interface ", "cmd": "show class-of-service slice interface ", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service traffic-classmap", "cmd": "show class-of-service traffic-classmap", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service trafficcontrol-profile", "cmd": "show class-of-service trafficcontrol-profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show class-of-service translationtable", "cmd": "show class-of-service translationtable", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show cli", "cmd": "show cli", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show cli history", "cmd": "show cli history", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show configuration chassis cluster traceoptions", "cmd": "show configuration chassis cluster traceoptions", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show configuration services analytics sensor ddos", "cmd": "show configuration services analytics sensor ddos", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show connections", "cmd": "show connections", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show database-replication statistics", "cmd": "show database-replication statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show database-replication summary", "cmd": "show database-replication summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show dcbx neighbors", "cmd": "show dcbx neighbors", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ddos-protection protocols culprit-flows", "cmd": "show ddos-protection protocols culprit-flows", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ddos-protection protocols flow-detection", "cmd": "show ddos-protection protocols flow-detection", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show ddos-protection protocols isis", "cmd": "show ddos-protection protocols isis", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ddos-protection protocols parameters", "cmd": "show ddos-protection protocols parameters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ddos-protection protocols statistics", "cmd": "show ddos-protection protocols statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ddos-protection protocols violations", "cmd": "show ddos-protection protocols violations", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ddos-protection version", "cmd": "show ddos-protection version", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp client binding", "cmd": "show dhcp client binding", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp relay activeleasequery", "cmd": "show dhcp relay activeleasequery", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp relay binding", "cmd": "show dhcp relay binding", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp relay statistics", "cmd": "show dhcp relay statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp server activeleasequery", "cmd": "show dhcp server activeleasequery", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp server activeleasequery statistics", "cmd": "show dhcp server activeleasequery statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp server binding", "cmd": "show dhcp server binding", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp snooping binding", "cmd": "show dhcp snooping binding", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp snooping statistics", "cmd": "show dhcp snooping statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp-security arp inspection statistics", "cmd": "show dhcp-security arp inspection statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp-security binding", "cmd": "show dhcp-security binding", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp-security binding ipsource-guard", "cmd": "show dhcp-security binding ipsource-guard", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcp-security neighbordiscovery-inspection statistics", "cmd": "show dhcp-security neighbordiscovery-inspection statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 client binding", "cmd": "show dhcpv6 client binding", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 client statistics", "cmd": "show dhcpv6 client statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 relay activeleasequery", "cmd": "show dhcpv6 relay activeleasequery", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 relay binding", "cmd": "show dhcpv6 relay binding", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 relay lockoutentries", "cmd": "show dhcpv6 relay lockoutentries", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 relay statistics", "cmd": "show dhcpv6 relay statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 server active", "cmd": "show dhcpv6 server active", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 server activeleasequery statistics", "cmd": "show dhcpv6 server activeleasequery statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 server binding", "cmd": "show dhcpv6 server binding", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 server binding (View)", "cmd": "show dhcpv6 server binding (View)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 server lockoutentries", "cmd": "show dhcpv6 server lockoutentries", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 server statistics", "cmd": "show dhcpv6 server statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 server statistics (View)", "cmd": "show dhcpv6 server statistics (View)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show dhcpv6 snooping binding", "cmd": "show dhcpv6 snooping binding", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show diagnostics tdr", "cmd": "show diagnostics tdr", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show diameter peer", "cmd": "show diameter peer", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show diameter peer map", "cmd": "show diameter peer map", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show dot1x authentication-failedusers", "cmd": "show dot1x authentication-failedusers", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show dot1x authenticationbypassed-users", "cmd": "show dot1x authenticationbypassed-users", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show dot1x firewall", "cmd": "show dot1x firewall", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show dot1x interface", "cmd": "show dot1x interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show dvmrp interfaces", "cmd": "show dvmrp interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show dvmrp prunes", "cmd": "show dvmrp prunes", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show dynamic-profile session", "cmd": "show dynamic-profile session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show dynamic-tunnels pfe-tunnellocalization", "cmd": "show dynamic-tunnels pfe-tunnellocalization", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show edge-virtual-bridging", "cmd": "show edge-virtual-bridging", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ephemeral-configuration", "cmd": "show ephemeral-configuration", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching contexthistory", "cmd": "show ethernet-switching contexthistory", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "BGP", "title": "show ethernet-switching evpn ndstatistics", "cmd": "show ethernet-switching evpn ndstatistics", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "BGP", "title": "show ethernet-switching evpn ndtable", "cmd": "show ethernet-switching evpn ndtable", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching flood", "cmd": "show ethernet-switching flood", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching globalinformation", "cmd": "show ethernet-switching globalinformation", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching interface", "cmd": "show ethernet-switching interface", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching interfaces", "cmd": "show ethernet-switching interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching layer2protocol-tunneling interface", "cmd": "show ethernet-switching layer2protocol-tunneling interface", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching layer2protocol-tunneling statistics", "cmd": "show ethernet-switching layer2protocol-tunneling statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching layer2protocol-tunneling vlan", "cmd": "show ethernet-switching layer2protocol-tunneling vlan", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching maclearning-log", "cmd": "show ethernet-switching maclearning-log", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching mgrppolicy", "cmd": "show ethernet-switching mgrppolicy", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching redundancy-groups", "cmd": "show ethernet-switching redundancy-groups", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching statistics aging", "cmd": "show ethernet-switching statistics aging", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching statistics mac-learning", "cmd": "show ethernet-switching statistics mac-learning", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching vxlantunnel-end-point esi", "cmd": "show ethernet-switching vxlantunnel-end-point esi", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show ethernet-switching vxlantunnel-end-point remote", "cmd": "show ethernet-switching vxlantunnel-end-point remote", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn gbp-src-tag", "cmd": "show evpn gbp-src-tag", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn instance", "cmd": "show evpn instance", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn l3-context", "cmd": "show evpn l3-context", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn multicast-snooping assisted-replication multihomedpeers", "cmd": "show evpn multicast-snooping assisted-replication multihomedpeers", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn multicast-snooping assisted-replication next-hops", "cmd": "show evpn multicast-snooping assisted-replication next-hops", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn multicast-snooping assisted-replication replicators", "cmd": "show evpn multicast-snooping assisted-replication replicators", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn multicast-snooping status", "cmd": "show evpn multicast-snooping status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn nd-table", "cmd": "show evpn nd-table", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn oism dci", "cmd": "show evpn oism dci", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn oism spmsi-ad", "cmd": "show evpn oism spmsi-ad", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn p2mp", "cmd": "show evpn p2mp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn peer-gateway-macs", "cmd": "show evpn peer-gateway-macs", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn prefix", "cmd": "show evpn prefix", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show evpn vpws-instance", "cmd": "show evpn vpws-instance", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show extensible-subscriberservices counters", "cmd": "show extensible-subscriberservices counters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show extensible-subscriberservices debug-information", "cmd": "show extensible-subscriberservices debug-information", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show extensible-subscriberservices dictionary", "cmd": "show extensible-subscriberservices dictionary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show extensible-subscriberservices dictionary attributes", "cmd": "show extensible-subscriberservices dictionary attributes", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show extensible-subscriberservices dictionary services", "cmd": "show extensible-subscriberservices dictionary services", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show extensible-subscriberservices service", "cmd": "show extensible-subscriberservices service", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show extensible-subscriberservices sessions", "cmd": "show extensible-subscriberservices sessions", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show extension-service requestresponse clients", "cmd": "show extension-service requestresponse clients", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show extension-service requestresponse servers", "cmd": "show extension-service requestresponse servers", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show extension-service status", "cmd": "show extension-service status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fabric administration inventory director-group status", "cmd": "show fabric administration inventory director-group status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fabric administration inventory infrastructure", "cmd": "show fabric administration inventory infrastructure", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fabric administration inventory node-devices", "cmd": "show fabric administration inventory node-devices", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fabric administration system mac-pool", "cmd": "show fabric administration system mac-pool", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fabric inventory", "cmd": "show fabric inventory", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fib-streaming routes", "cmd": "show fib-streaming routes", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fib-streaming state", "cmd": "show fib-streaming state", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fibre-channel fip enode", "cmd": "show fibre-channel fip enode", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fibre-channel fip fabric", "cmd": "show fibre-channel fip fabric", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fibre-channel fip fcf", "cmd": "show fibre-channel fip fcf", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fibre-channel flogi nport", "cmd": "show fibre-channel flogi nport", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fibre-channel interfaces", "cmd": "show fibre-channel interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fibre-channel next-hops", "cmd": "show fibre-channel next-hops", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fibre-channel proxy fabricstate", "cmd": "show fibre-channel proxy fabricstate", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fibre-channel proxy logintable", "cmd": "show fibre-channel proxy logintable", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fibre-channel proxy statistics", "cmd": "show fibre-channel proxy statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show fibre-channel routes", "cmd": "show fibre-channel routes", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show fip snooping enode", "cmd": "show fip snooping enode", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show fip snooping statistics", "cmd": "show fip snooping statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "show fip snooping vlan", "cmd": "show fip snooping vlan", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "show fip vlan-discovery", "cmd": "show fip vlan-discovery", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show firewall", "cmd": "show firewall", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "ACL", "title": "show firewall filter version", "cmd": "show firewall filter version", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show firewall log", "cmd": "show firewall log", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show firewall policer", "cmd": "show firewall policer", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show flexible-tunnels profiles", "cmd": "show flexible-tunnels profiles", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show flight-recorder status", "cmd": "show flight-recorder status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show forwarding-options enhanced-hash-key", "cmd": "show forwarding-options enhanced-hash-key", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show forwarding-options hashkey", "cmd": "show forwarding-options hashkey", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show forwarding-options hypermode", "cmd": "show forwarding-options hypermode", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show forwarding-options loadbalance", "cmd": "show forwarding-options loadbalance", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show forwarding-options loadbalance ecmp|trunk", "cmd": "show forwarding-options loadbalance ecmp|trunk", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show forwarding-options nexthop-group", "cmd": "show forwarding-options nexthop-group", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show forwarding-options portmirroring", "cmd": "show forwarding-options portmirroring", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show groups junos-defaults", "cmd": "show groups junos-defaults", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show gtp tunnels", "cmd": "show gtp tunnels", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show hfrr profiles", "cmd": "show hfrr profiles", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show host", "cmd": "show host", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show iccp", "cmd": "show iccp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show igmp group", "cmd": "show igmp group", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show igmp interface", "cmd": "show igmp interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show igmp snooping interface", "cmd": "show igmp snooping interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show igmp snooping options", "cmd": "show igmp snooping options", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show igmp snooping statistics", "cmd": "show igmp snooping statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show igmp statistics", "cmd": "show igmp statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show igmp-snooping statistics", "cmd": "show igmp-snooping statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "show igmp-snooping vlans", "cmd": "show igmp-snooping vlans", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "show ike security-associations", "cmd": "show ike security-associations", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ilmi statistics", "cmd": "show ilmi statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ingress-replication mvpn", "cmd": "show ingress-replication mvpn", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (ATM)", "cmd": "show interfaces (ATM)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (Abstracted Fabric)", "cmd": "show interfaces (Abstracted Fabric)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (Adaptive Services)", "cmd": "show interfaces (Adaptive Services)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "show interfaces (Aggregated Ethernet)", "cmd": "show interfaces (Aggregated Ethernet)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (Encryption)", "cmd": "show interfaces (Encryption)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (Fast Ethernet)", "cmd": "show interfaces (Fast Ethernet)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (GRE)", "cmd": "show interfaces (GRE)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (Link Services)", "cmd": "show interfaces (Link Services)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (Loopback)", "cmd": "show interfaces (Loopback)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (M Series, MX Series, T Series Routers, and PTX Series Managemen", "cmd": "show interfaces (M Series, MX Series, T Series Routers, and PTX Series Management and Internal Ethernet)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (Multilink Services)", "cmd": "show interfaces (Multilink Services)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (NFX150)", "cmd": "show interfaces (NFX150)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show interfaces (PIM)", "cmd": "show interfaces (PIM)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (Redundant Adaptive Services)", "cmd": "show interfaces (Redundant Adaptive Services)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (Redundant Link Services IQ)", "cmd": "show interfaces (Redundant Link Services IQ)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (Serial)", "cmd": "show interfaces (Serial)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "show interfaces (View Aggregated Ethernet)", "cmd": "show interfaces (View Aggregated Ethernet)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces (Virtual Loopback Tunnel)", "cmd": "show interfaces (Virtual Loopback Tunnel)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "show interfaces anchor-group (Aggregated Packet Forwarding Engine)", "cmd": "show interfaces anchor-group (Aggregated Packet Forwarding Engine)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces demux0 (Demux Interfaces)", "cmd": "show interfaces demux0 (Demux Interfaces)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces detail", "cmd": "show interfaces detail", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces diagnostics optics (Security)", "cmd": "show interfaces diagnostics optics (Security)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces diagnostics opticsapplications", "cmd": "show interfaces diagnostics opticsapplications", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces diagnostics opticsprofile", "cmd": "show interfaces diagnostics opticsprofile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces extensive", "cmd": "show interfaces extensive", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces extensive satellitedevice", "cmd": "show interfaces extensive satellitedevice", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces fabric", "cmd": "show interfaces fabric", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show interfaces forwarding-classcounters", "cmd": "show interfaces forwarding-classcounters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces fti", "cmd": "show interfaces fti", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ge", "cmd": "show interfaces ge", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces interface-set (Ethernet, ACI, ALI Interface Set)", "cmd": "show interfaces interface-set (Ethernet, ACI, ALI Interface Set)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces interface-set queue", "cmd": "show interfaces interface-set queue", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces interval", "cmd": "show interfaces interval", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces lb-stats af", "cmd": "show interfaces lb-stats af", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show interfaces lbi (Looping-back Interface)", "cmd": "show interfaces lbi (Looping-back Interface)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "show interfaces load-balancing (Aggregated Multiservices)", "cmd": "show interfaces load-balancing (Aggregated Multiservices)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces lsi (Label-Switched Interface)", "cmd": "show interfaces lsi (Label-Switched Interface)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces mac-database", "cmd": "show interfaces mac-database", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces mc-ae", "cmd": "show interfaces mc-ae", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces mc-ae (MX Series)", "cmd": "show interfaces mc-ae (MX Series)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces prbs-stats", "cmd": "show interfaces prbs-stats", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces priority-group", "cmd": "show interfaces priority-group", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces ps0 (Pseudowire Subscriber Interfaces)", "cmd": "show interfaces ps0 (Pseudowire Subscriber Interfaces)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces queue", "cmd": "show interfaces queue", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces routing", "cmd": "show interfaces routing", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "show interfaces snmp-index", "cmd": "show interfaces snmp-index", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show interfaces snooping", "cmd": "show interfaces snooping", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces statistics", "cmd": "show interfaces statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces statistics st0", "cmd": "show interfaces statistics st0", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces terse zone", "cmd": "show interfaces terse zone", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces vcp", "cmd": "show interfaces vcp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "show interfaces vlan", "cmd": "show interfaces vlan", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "show interfaces xle", "cmd": "show interfaces xle", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ip-source-guard", "cmd": "show ip-source-guard", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis adjacency", "cmd": "show isis adjacency", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis authentication", "cmd": "show isis authentication", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis backup label-switchedpath", "cmd": "show isis backup label-switchedpath", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis backup spf results", "cmd": "show isis backup spf results", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis context-identifier", "cmd": "show isis context-identifier", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis database", "cmd": "show isis database", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis flex-algorithm", "cmd": "show isis flex-algorithm", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis interface-group", "cmd": "show isis interface-group", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis purge log", "cmd": "show isis purge log", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis route", "cmd": "show isis route", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis spf", "cmd": "show isis spf", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis spring interface trafficstatistics", "cmd": "show isis spring interface trafficstatistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis spring sensor info", "cmd": "show isis spring sensor info", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show isis statistics", "cmd": "show isis statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show l2-learning global-maccount", "cmd": "show l2-learning global-maccount", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show l2-learning globalinformation", "cmd": "show l2-learning globalinformation", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show l2-learning instance", "cmd": "show l2-learning instance", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show l2-learning mac-movebuffer", "cmd": "show l2-learning mac-movebuffer", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show l2-learning redundancygroups", "cmd": "show l2-learning redundancygroups", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show l2circuit connections", "cmd": "show l2circuit connections", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show l2pt interface", "cmd": "show l2pt interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "show lacp interfaces", "cmd": "show lacp interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "show lacp interfaces (View)", "cmd": "show lacp interfaces (View)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "show lacp timeouts", "cmd": "show lacp timeouts", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show ldp database", "cmd": "show ldp database", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show ldp fec-filters", "cmd": "show ldp fec-filters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show ldp interface", "cmd": "show ldp interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show ldp neighbor", "cmd": "show ldp neighbor", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show ldp overview", "cmd": "show ldp overview", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show ldp p2mp fec", "cmd": "show ldp p2mp fec", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show ldp p2mp path", "cmd": "show ldp p2mp path", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show ldp rib-groups", "cmd": "show ldp rib-groups", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show ldp session", "cmd": "show ldp session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show ldp statistics", "cmd": "show ldp statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show ldp traffic-statistics", "cmd": "show ldp traffic-statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show link-management", "cmd": "show link-management", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show link-management routing", "cmd": "show link-management routing", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show link-management te-link", "cmd": "show link-management te-link", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show lldp", "cmd": "show lldp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show lldp neighbors", "cmd": "show lldp neighbors", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show lldp statistics", "cmd": "show lldp statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show log", "cmd": "show log", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show loop-detect enhanced interface", "cmd": "show loop-detect enhanced interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show mac-rewrite interface", "cmd": "show mac-rewrite interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding flood", "cmd": "show mac-vrf forwarding flood", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding floodgroup", "cmd": "show mac-vrf forwarding floodgroup", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding globalinformation", "cmd": "show mac-vrf forwarding globalinformation", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding globalmac-count", "cmd": "show mac-vrf forwarding globalmac-count", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding globalmac-ip-count", "cmd": "show mac-vrf forwarding globalmac-ip-count", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding instancemapping", "cmd": "show mac-vrf forwarding instancemapping", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding interface", "cmd": "show mac-vrf forwarding interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding mac-iptable", "cmd": "show mac-vrf forwarding mac-iptable", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding mactable", "cmd": "show mac-vrf forwarding mactable", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding mgrppolicy", "cmd": "show mac-vrf forwarding mgrppolicy", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding statistics", "cmd": "show mac-vrf forwarding statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding vlans", "cmd": "show mac-vrf forwarding vlans", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding vxlan", "cmd": "show mac-vrf forwarding vxlan", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding vxlantunnel-end-point esi", "cmd": "show mac-vrf forwarding vxlantunnel-end-point esi", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mac-vrf forwarding vxlantunnel-end-point svlbnh", "cmd": "show mac-vrf forwarding vxlantunnel-end-point svlbnh", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show mld interface", "cmd": "show mld interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show mld snooping interface", "cmd": "show mld snooping interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show mld snooping statistics", "cmd": "show mld snooping statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show mld statistics", "cmd": "show mld statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "show mld-snooping vlans", "cmd": "show mld-snooping vlans", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show modem wireless profiles", "cmd": "show modem wireless profiles", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show monitor security flow", "cmd": "show monitor security flow", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mpls abstract-hopmembership", "cmd": "show mpls abstract-hopmembership", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mpls admin-groups", "cmd": "show mpls admin-groups", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mpls correlation label", "cmd": "show mpls correlation label", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mpls cspf", "cmd": "show mpls cspf", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mpls diffserv-te", "cmd": "show mpls diffserv-te", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mpls interface", "cmd": "show mpls interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mpls lsp", "cmd": "show mpls lsp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mpls lsp autobandwidth", "cmd": "show mpls lsp autobandwidth", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mpls path", "cmd": "show mpls path", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mpls srlg", "cmd": "show mpls srlg", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show mpls static-lsp", "cmd": "show mpls static-lsp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show msdp source", "cmd": "show msdp source", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show msdp source-active", "cmd": "show msdp source-active", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show multi-chassis mc-lag configuration-consistency", "cmd": "show multi-chassis mc-lag configuration-consistency", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show multi-chassis mc-lag configuration-consistency globalconfig", "cmd": "show multi-chassis mc-lag configuration-consistency globalconfig", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show multi-chassis mc-lag configuration-consistency iclconfig", "cmd": "show multi-chassis mc-lag configuration-consistency iclconfig", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show multi-chassis mc-lag configuration-consistency list-ofparameters", "cmd": "show multi-chassis mc-lag configuration-consistency list-ofparameters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show multi-chassis mc-lag configuration-consistency mcaeconfig", "cmd": "show multi-chassis mc-lag configuration-consistency mcaeconfig", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "show multi-chassis mc-lag configuration-consistency vlanconfig", "cmd": "show multi-chassis mc-lag configuration-consistency vlanconfig", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show multi-chassis mc-lag configuration-consistency vrrpconfig", "cmd": "show multi-chassis mc-lag configuration-consistency vrrpconfig", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show multicast flow-map", "cmd": "show multicast flow-map", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show multicast interface", "cmd": "show multicast interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show multicast next-hops", "cmd": "show multicast next-hops", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show multicast pim-to-igmpproxy", "cmd": "show multicast pim-to-igmpproxy", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show multicast route", "cmd": "show multicast route", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show multicast scope", "cmd": "show multicast scope", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show multicast snooping nexthops", "cmd": "show multicast snooping nexthops", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show multicast snooping nexthops satellite", "cmd": "show multicast snooping nexthops satellite", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show multicast snooping route", "cmd": "show multicast snooping route", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show multicast snooping route satellite", "cmd": "show multicast snooping route satellite", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show multicast statistics", "cmd": "show multicast statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "show mvrp dynamic-vlanmemberships", "cmd": "show mvrp dynamic-vlanmemberships", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show mvrp interface", "cmd": "show mvrp interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show mvrp statistics", "cmd": "show mvrp statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show neighbor-discoveryinspection statistics", "cmd": "show neighbor-discoveryinspection statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network access nas-5g", "cmd": "show network access nas-5g", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access aaa accounting", "cmd": "show network-access aaa accounting", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show network-access aaa radiusservers", "cmd": "show network-access aaa radiusservers", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access aaa saml assertion-cache", "cmd": "show network-access aaa saml assertion-cache", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access aaa statistics", "cmd": "show network-access aaa statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access aaa statistics accounting", "cmd": "show network-access aaa statistics accounting", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show network-access aaa statistics authentication", "cmd": "show network-access aaa statistics authentication", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access aaa statistics dynamic-requests", "cmd": "show network-access aaa statistics dynamic-requests", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access aaa statistics pending-accounting-stops", "cmd": "show network-access aaa statistics pending-accounting-stops", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show network-access aaa statistics re-authentication", "cmd": "show network-access aaa statistics re-authentication", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access aaa subscribers session-id", "cmd": "show network-access aaa subscribers session-id", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access aaa terminate-code", "cmd": "show network-access aaa terminate-code", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access addressassignment pool (View)", "cmd": "show network-access addressassignment pool (View)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access domainmap", "cmd": "show network-access domainmap", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access gx-plus", "cmd": "show network-access gx-plus", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access nasreq statistics", "cmd": "show network-access nasreq statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access ocs", "cmd": "show network-access ocs", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access radsec localcertificate", "cmd": "show network-access radsec localcertificate", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access radsec statistics", "cmd": "show network-access radsec statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access requests pending", "cmd": "show network-access requests pending", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access requests statistics", "cmd": "show network-access requests statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-access s6a", "cmd": "show network-access s6a", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show network-agent statistics", "cmd": "show network-agent statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show nlsd mode", "cmd": "show nlsd mode", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show node reboot", "cmd": "show node reboot", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show node statistics", "cmd": "show node statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show oam ethernet connectivityfault-management forwardingstate", "cmd": "show oam ethernet connectivityfault-management forwardingstate", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show oam ethernet connectivityfault-management interfaces", "cmd": "show oam ethernet connectivityfault-management interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show oam ethernet connectivityfault-management linktrace pathdatabase", "cmd": "show oam ethernet connectivityfault-management linktrace pathdatabase", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show oam ethernet connectivityfault-management mip", "cmd": "show oam ethernet connectivityfault-management mip", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show oam ethernet connectivityfault-management sla-iteratorstatistics", "cmd": "show oam ethernet connectivityfault-management sla-iteratorstatistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show oam ethernet connectivityfault-management synthetic-lossstatistics", "cmd": "show oam ethernet connectivityfault-management synthetic-lossstatistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show oam ethernet evc", "cmd": "show oam ethernet evc", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show oam ethernet link-faultmanagement", "cmd": "show oam ethernet link-faultmanagement", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show oam ethernet lmi", "cmd": "show oam ethernet lmi", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show oam fabric interfaces", "cmd": "show oam fabric interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show openflow capability", "cmd": "show openflow capability", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show openflow statistics flows", "cmd": "show openflow statistics flows", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show openflow statistics interfaces", "cmd": "show openflow statistics interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show openflow statistics summary", "cmd": "show openflow statistics summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show openflow summary", "cmd": "show openflow summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show ospf spring sid database", "cmd": "show ospf spring sid database", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "show ospf3 database", "cmd": "show ospf3 database", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ovsdb controller", "cmd": "show ovsdb controller", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ovsdb mac", "cmd": "show ovsdb mac", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ovsdb statistics interface", "cmd": "show ovsdb statistics interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ovsdb tunnels", "cmd": "show ovsdb tunnels", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show passive-monitoring error", "cmd": "show passive-monitoring error", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show passive-monitoring flow", "cmd": "show passive-monitoring flow", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show path-computation-client active-pce", "cmd": "show path-computation-client active-pce", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show path-computation-client statistics", "cmd": "show path-computation-client statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show path-computation-client status", "cmd": "show path-computation-client status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show performance-monitoring mpls lsp", "cmd": "show performance-monitoring mpls lsp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show pfe cfeb", "cmd": "show pfe cfeb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show pfe data", "cmd": "show pfe data", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show pfe feb", "cmd": "show pfe feb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show pfe filter hw summary", "cmd": "show pfe filter hw summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show pfe fpc", "cmd": "show pfe fpc", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show pfe next-hop", "cmd": "show pfe next-hop", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show pfe route", "cmd": "show pfe route", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show pfe sFlow egress-mcaststats", "cmd": "show pfe sFlow egress-mcaststats", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show pfe ssb", "cmd": "show pfe ssb", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show pfe statistics bridge", "cmd": "show pfe statistics bridge", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show pfe version", "cmd": "show pfe version", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "show pfe vxlan", "cmd": "show pfe vxlan", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim bidirectional df-election interface", "cmd": "show pim bidirectional df-election interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim bootstrap", "cmd": "show pim bootstrap", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim mdt", "cmd": "show pim mdt", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim mdt data-mdt-joins", "cmd": "show pim mdt data-mdt-joins", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim mdt data-mdt-limit", "cmd": "show pim mdt data-mdt-limit", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim mvpn", "cmd": "show pim mvpn", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim neighbors", "cmd": "show pim neighbors", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim snooping interfaces", "cmd": "show pim snooping interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim snooping join", "cmd": "show pim snooping join", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim snooping statistics", "cmd": "show pim snooping statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim source", "cmd": "show pim source", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show pim statistics", "cmd": "show pim statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show poe controller", "cmd": "show poe controller", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show poe controller (View)", "cmd": "show poe controller (View)", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show poe telemetries", "cmd": "show poe telemetries", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show policy conditions", "cmd": "show policy conditions", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show policy damping", "cmd": "show policy damping", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ppp address-pool", "cmd": "show ppp address-pool", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show pppoe interface-sets", "cmd": "show pppoe interface-sets", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show pppoe interfaces", "cmd": "show pppoe interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show pppoe lockout", "cmd": "show pppoe lockout", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "show pppoe lockout vlanidentifier", "cmd": "show pppoe lockout vlanidentifier", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show protection-group ethernetring aps", "cmd": "show protection-group ethernetring aps", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show protection-group ethernetring configuration", "cmd": "show protection-group ethernetring configuration", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show protection-group ethernetring data-channel", "cmd": "show protection-group ethernetring data-channel", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show protection-group ethernetring flush-info", "cmd": "show protection-group ethernetring flush-info", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show protection-group ethernetring interface", "cmd": "show protection-group ethernetring interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show protection-group ethernetring node-state", "cmd": "show protection-group ethernetring node-state", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show protection-group ethernetring statistics", "cmd": "show protection-group ethernetring statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "show protection-group ethernetring vlan", "cmd": "show protection-group ethernetring vlan", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "show ptp aggregated-ethernet interfaces", "cmd": "show ptp aggregated-ethernet interfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp all master clock", "cmd": "show ptp all master clock", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp global-information", "cmd": "show ptp global-information", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp hybrid", "cmd": "show ptp hybrid", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp lock-status", "cmd": "show ptp lock-status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp passive-port-monitorstatus", "cmd": "show ptp passive-port-monitorstatus", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp path-trace detail", "cmd": "show ptp path-trace detail", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp performance-monitor measurement 15min", "cmd": "show ptp performance-monitor measurement 15min", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp performance-monitor measurement 24h", "cmd": "show ptp performance-monitor measurement 24h", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp performance-monitor statistics 15min", "cmd": "show ptp performance-monitor statistics 15min", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp performance-monitor statistics 24h", "cmd": "show ptp performance-monitor statistics 24h", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp performance-monitor status", "cmd": "show ptp performance-monitor status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show ptp phy-timestampinginterfaces", "cmd": "show ptp phy-timestampinginterfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp port", "cmd": "show ptp port", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp slave", "cmd": "show ptp slave", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ptp stateful detail", "cmd": "show ptp stateful detail", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show redundant-power-system led", "cmd": "show redundant-power-system led", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show redundant-power-system multi-backup", "cmd": "show redundant-power-system multi-backup", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show redundant-power-system network", "cmd": "show redundant-power-system network", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show redundant-power-system power-supply", "cmd": "show redundant-power-system power-supply", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show redundant-power-system status", "cmd": "show redundant-power-system status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show redundant-power-system upgrade", "cmd": "show redundant-power-system upgrade", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show redundant-power-system version", "cmd": "show redundant-power-system version", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show redundant-trunk-group", "cmd": "show redundant-trunk-group", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show remote-device-management service-devices", "cmd": "show remote-device-management service-devices", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show remote-device-management services", "cmd": "show remote-device-management services", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show remote-device-management statistics", "cmd": "show remote-device-management statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show remote-device-management subscribers", "cmd": "show remote-device-management subscribers", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show remote-device-management summary", "cmd": "show remote-device-management summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show resource-manager", "cmd": "show resource-manager", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show resource-manager cpu", "cmd": "show resource-manager cpu", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show rift flood-reduction", "cmd": "show rift flood-reduction", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show rift node", "cmd": "show rift node", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show rift path-computation", "cmd": "show rift path-computation", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show rift routes", "cmd": "show rift routes", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show rift tie", "cmd": "show rift tie", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show rift topology", "cmd": "show rift topology", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show rift versions", "cmd": "show rift versions", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show rip general-statistics", "cmd": "show rip general-statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show rip neighbor", "cmd": "show rip neighbor", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show rip statistics", "cmd": "show rip statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ripng general-statistics", "cmd": "show ripng general-statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ripng neighbor", "cmd": "show ripng neighbor", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route aspath-regex", "cmd": "show route aspath-regex", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route brief", "cmd": "show route brief", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route ccc", "cmd": "show route ccc", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route community", "cmd": "show route community", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route cumulative", "cmd": "show route cumulative", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route exact", "cmd": "show route exact", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route export", "cmd": "show route export", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show route export vrf-target", "cmd": "show route export vrf-target", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route extensive", "cmd": "show route extensive", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route extensive expanded-nh", "cmd": "show route extensive expanded-nh", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route forwarding-table", "cmd": "show route forwarding-table", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route forwarding-table family fibre-channel", "cmd": "show route forwarding-table family fibre-channel", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route forwarding-table interface-name", "cmd": "show route forwarding-table interface-name", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route hidden", "cmd": "show route hidden", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route inactive-path", "cmd": "show route inactive-path", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route instance", "cmd": "show route instance", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route localization", "cmd": "show route localization", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route output", "cmd": "show route output", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route pfe-install-error", "cmd": "show route pfe-install-error", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route protocol", "cmd": "show route protocol", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route receive-protocol", "cmd": "show route receive-protocol", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route resolution", "cmd": "show route resolution", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route tenant", "cmd": "show route tenant", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "show route vpn-localization", "cmd": "show route vpn-localization", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show routing nhdb pfe-installerror", "cmd": "show routing nhdb pfe-installerror", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show rsvp interface", "cmd": "show rsvp interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show rsvp pop-and-forward", "cmd": "show rsvp pop-and-forward", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show rsvp route-session-id", "cmd": "show rsvp route-session-id", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show rsvp session", "cmd": "show rsvp session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show rsvp statistics", "cmd": "show rsvp statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show sap listen", "cmd": "show sap listen", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security advance policy based routing multipath policy statistics", "cmd": "show security advance policy based routing multipath policy statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security advance-policy", "cmd": "show security advance-policy", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security advance-policybased-routing detail", "cmd": "show security advance-policybased-routing detail", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security advance-policybased-routing profile", "cmd": "show security advance-policybased-routing profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security advance-policybased-routing sla profile (Application Name)", "cmd": "show security advance-policybased-routing sla profile (Application Name)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security advance-policybased-routing sla profile (NextHop)", "cmd": "show security advance-policybased-routing sla profile (NextHop)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security advance-policybased-routing sla statistics", "cmd": "show security advance-policybased-routing sla statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security alarms", "cmd": "show security alarms", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security alg msrpc", "cmd": "show security alg msrpc", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security alg sip calls", "cmd": "show security alg sip calls", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security alg sip rate", "cmd": "show security alg sip rate", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security alg status", "cmd": "show security alg status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security application-tracking counters", "cmd": "show security application-tracking counters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security casb policies", "cmd": "show security casb policies", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security datapath-debug capture", "cmd": "show security datapath-debug capture", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security datapath-debug counter", "cmd": "show security datapath-debug counter", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security dns-cache", "cmd": "show security dns-cache", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security firewallauthentication history", "cmd": "show security firewallauthentication history", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security firewallauthentication history address", "cmd": "show security firewallauthentication history address", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security firewallauthentication history identifier", "cmd": "show security firewallauthentication history identifier", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security firewallauthentication users", "cmd": "show security firewallauthentication users", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security firewallauthentication users address", "cmd": "show security firewallauthentication users address", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security firewallauthentication users auth-type", "cmd": "show security firewallauthentication users auth-type", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security firewallauthentication users identifier", "cmd": "show security firewallauthentication users identifier", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow cp-session", "cmd": "show security flow cp-session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow cp-session destination-port", "cmd": "show security flow cp-session destination-port", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow cp-session destination-prefix", "cmd": "show security flow cp-session destination-prefix", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow cp-session family", "cmd": "show security flow cp-session family", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow cp-session protocol", "cmd": "show security flow cp-session protocol", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow cp-session source-port", "cmd": "show security flow cp-session source-port", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow cp-session source-prefix", "cmd": "show security flow cp-session source-prefix", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow gate", "cmd": "show security flow gate", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow gate brief node", "cmd": "show security flow gate brief node", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow gate destination-prefix", "cmd": "show security flow gate destination-prefix", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow gate summary node", "cmd": "show security flow gate summary node", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow service-offload virtual-offload statistics (CSDS)", "cmd": "show security flow service-offload virtual-offload statistics (CSDS)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session advanced-anti-malware", "cmd": "show security flow session advanced-anti-malware", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session application-firewall", "cmd": "show security flow session application-firewall", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session brief node", "cmd": "show security flow session brief node", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session destination-port", "cmd": "show security flow session destination-port", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session destination-prefix", "cmd": "show security flow session destination-prefix", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session extensive node", "cmd": "show security flow session extensive node", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session idp family", "cmd": "show security flow session idp family", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session idp summary", "cmd": "show security flow session idp summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session interface", "cmd": "show security flow session interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session nat", "cmd": "show security flow session nat", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session plugins", "cmd": "show security flow session plugins", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session policyid", "cmd": "show security flow session policyid", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session protocol", "cmd": "show security flow session protocol", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session resource-manager", "cmd": "show security flow session resource-manager", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session services-offload", "cmd": "show security flow session services-offload", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session session-identifier", "cmd": "show security flow session session-identifier", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session session-state", "cmd": "show security flow session session-state", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session sourceport", "cmd": "show security flow session sourceport", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session sourceprefix", "cmd": "show security flow session sourceprefix", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session ssl", "cmd": "show security flow session ssl", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session summary family", "cmd": "show security flow session summary family", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session summary node", "cmd": "show security flow session summary node", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow session summary services-offload", "cmd": "show security flow session summary services-offload", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow statistics", "cmd": "show security flow statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security flow status", "cmd": "show security flow status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security forward-options resource-manager", "cmd": "show security forward-options resource-manager", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security forwarding-options mirror-filter", "cmd": "show security forwarding-options mirror-filter", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "show security group-vpn member ike security-associations", "cmd": "show security group-vpn member ike security-associations", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "show security group-vpn member ipsec statistics", "cmd": "show security group-vpn member ipsec statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security group-vpn member kek security-associations", "cmd": "show security group-vpn member kek security-associations", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "show security group-vpn server ike security-associations", "cmd": "show security group-vpn server ike security-associations", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security group-vpn server kek security-associations", "cmd": "show security group-vpn server kek security-associations", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security group-vpn server statistics", "cmd": "show security group-vpn server statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security gtp", "cmd": "show security gtp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security gtp counters", "cmd": "show security gtp counters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security gtp counters pathrate-limit", "cmd": "show security gtp counters pathrate-limit", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security gtp grouped-ieprofile", "cmd": "show security gtp grouped-ieprofile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security gtp handovergroup", "cmd": "show security gtp handovergroup", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security gtp ie-set", "cmd": "show security gtp ie-set", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security gtp message-ieprofile-v1", "cmd": "show security gtp message-ieprofile-v1", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security gtp message-ieprofile-v2", "cmd": "show security gtp message-ieprofile-v2", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security gtp message-list", "cmd": "show security gtp message-list", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security gtp profile", "cmd": "show security gtp profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security host-vpn securityassociations", "cmd": "show security host-vpn securityassociations", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp active-policy", "cmd": "show security idp active-policy", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp attack attack-list policy", "cmd": "show security idp attack attack-list policy", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp attack attacklist", "cmd": "show security idp attack attacklist", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp attack deprecated-list", "cmd": "show security idp attack deprecated-list", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp attack description", "cmd": "show security idp attack description", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp attack detail", "cmd": "show security idp attack detail", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp attack grouplist", "cmd": "show security idp attack grouplist", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp attack table", "cmd": "show security idp attack table", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp attacks deprecated-attacks policy policy_name", "cmd": "show security idp attacks deprecated-attacks policy policy_name", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp counters application-identification", "cmd": "show security idp counters application-identification", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp counters httpdecoder", "cmd": "show security idp counters httpdecoder", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp counters ips", "cmd": "show security idp counters ips", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp counters log", "cmd": "show security idp counters log", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp counters memory", "cmd": "show security idp counters memory", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp counters packetlog", "cmd": "show security idp counters packetlog", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp counters pdfdecoder", "cmd": "show security idp counters pdfdecoder", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp counters policymanager", "cmd": "show security idp counters policymanager", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp counters sslinspection", "cmd": "show security idp counters sslinspection", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp counters tcpreassembler", "cmd": "show security idp counters tcpreassembler", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp jist-packageversion", "cmd": "show security idp jist-packageversion", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp logical-system policy-association", "cmd": "show security idp logical-system policy-association", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp memory", "cmd": "show security idp memory", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp policies", "cmd": "show security idp policies", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp policy-commitstatus", "cmd": "show security idp policy-commitstatus", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp policytemplates-list", "cmd": "show security idp policytemplates-list", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp predefinedattacks", "cmd": "show security idp predefinedattacks", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp securitypackage-version", "cmd": "show security idp securitypackage-version", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp ssl-inspection key", "cmd": "show security idp ssl-inspection key", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp ssl-inspection session-id-cache", "cmd": "show security idp ssl-inspection session-id-cache", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp status", "cmd": "show security idp status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security idp status detail", "cmd": "show security idp status detail", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "show security ike debug-status", "cmd": "show security ike debug-status", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "show security ike peers", "cmd": "show security ike peers", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "show security ike stats", "cmd": "show security ike stats", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security integrity", "cmd": "show security integrity", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "show security ipsec control-planesecurity-associations", "cmd": "show security ipsec control-planesecurity-associations", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "show security ipsec next-hoptunnels", "cmd": "show security ipsec next-hoptunnels", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "show security ipsec securityassociations", "cmd": "show security ipsec securityassociations", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "show security ipsec statistics", "cmd": "show security ipsec statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "show security ipsec trafficselector", "cmd": "show security ipsec trafficselector", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "show security ipsec tunnel-eventsstatistics", "cmd": "show security ipsec tunnel-eventsstatistics", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "show security ipsec tunneldistribution", "cmd": "show security ipsec tunneldistribution", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "show security ipsec vpn vpnname ike idle time", "cmd": "show security ipsec vpn vpnname ike idle time", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security keychain", "cmd": "show security keychain", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security log", "cmd": "show security log", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security log report", "cmd": "show security log report", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security macsec connections", "cmd": "show security macsec connections", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security macsec connections (MX Series)", "cmd": "show security macsec connections (MX Series)", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "show security macsec connections (SRX)", "cmd": "show security macsec connections (SRX)", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "show security macsec statistics (SRX Series Firewalls)", "cmd": "show security macsec statistics (SRX Series Firewalls)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security mka sessions", "cmd": "show security mka sessions", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security mka sessions (MX Series)", "cmd": "show security mka sessions (MX Series)", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "show security mka sessions (SRX Series Device", "cmd": "show security mka sessions (SRX Series Device", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security mka sessions summary", "cmd": "show security mka sessions summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security mka statistics", "cmd": "show security mka statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security mka statistics (MX Series)", "cmd": "show security mka statistics (MX Series)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security monitoring", "cmd": "show security monitoring", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security monitoring performance session", "cmd": "show security monitoring performance session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security monitoring fpc fpcnumber", "cmd": "show security monitoring fpc fpcnumber", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat destination ruleapplication", "cmd": "show security nat destination ruleapplication", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat destination summary", "cmd": "show security nat destination summary", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat interface-natports", "cmd": "show security nat interface-natports", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat resource-usage source-pool", "cmd": "show security nat resource-usage source-pool", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat source deterministic", "cmd": "show security nat source deterministic", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat source pairedaddress", "cmd": "show security nat source pairedaddress", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat source persistent-nat-table", "cmd": "show security nat source persistent-nat-table", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat source pool", "cmd": "show security nat source pool", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat source portblock", "cmd": "show security nat source portblock", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat source rule", "cmd": "show security nat source rule", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat source ruleapplication", "cmd": "show security nat source ruleapplication", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat source summary", "cmd": "show security nat source summary", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "show security nat static rule", "cmd": "show security nat static rule", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security pki ca-certificate", "cmd": "show security pki ca-certificate", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security pki ca-certificate (View)", "cmd": "show security pki ca-certificate (View)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security pki certificaterequest", "cmd": "show security pki certificaterequest", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security pki certificaterequest (View)", "cmd": "show security pki certificaterequest (View)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security pki crl", "cmd": "show security pki crl", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security pki crl (View)", "cmd": "show security pki crl (View)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security pki node-local certificate-request", "cmd": "show security pki node-local certificate-request", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security pki node-local localcertificate", "cmd": "show security pki node-local localcertificate", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security pki statistics", "cmd": "show security pki statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "show security policies", "cmd": "show security policies", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "show security policies fileserialization counters", "cmd": "show security policies fileserialization counters", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "show security policies unknownsource-identity", "cmd": "show security policies unknownsource-identity", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "show security policies zonecontext", "cmd": "show security policies zonecontext", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "show security re-distribution ipsec-vpn", "cmd": "show security re-distribution ipsec-vpn", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security resource-manager group active", "cmd": "show security resource-manager group active", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security resource-manager resource active", "cmd": "show security resource-manager resource active", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security resource-manager settings", "cmd": "show security resource-manager settings", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security resource-manager summary", "cmd": "show security resource-manager summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security screen statistics", "cmd": "show security screen statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security screen status", "cmd": "show security screen status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security screen white-list", "cmd": "show security screen white-list", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security shadow-policies", "cmd": "show security shadow-policies", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security softwires", "cmd": "show security softwires", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security softwires map-e confidentiality status", "cmd": "show security softwires map-e confidentiality status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security tcp-encap connection", "cmd": "show security tcp-encap connection", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security tpm status", "cmd": "show security tpm status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security user-identification device-provision authenticationsource jims sta", "cmd": "show security user-identification device-provision authenticationsource jims start 1 count 9 (matchstring|prefix)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security user-identification local-authentication-table", "cmd": "show security user-identification local-authentication-table", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security user-identification role-provision authenticationsource active-dir", "cmd": "show security user-identification role-provision authenticationsource active-directory start 1 count 9 (match-string|prefix)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security user-identification role-provision authenticationsource jims start", "cmd": "show security user-identification role-provision authenticationsource jims start 1 count 9 (matchstring|prefix)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security user-identification source-identity-provision all", "cmd": "show security user-identification source-identity-provision all", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security user-identification user-provision all", "cmd": "show security user-identification user-provision all", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security user-identification user-provision authenticationsource active-dir", "cmd": "show security user-identification user-provision authenticationsource active-directory start 1 count 9 (match-string|prefix)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show security user-identification user-provision authenticationsource jims start", "cmd": "show security user-identification user-provision authenticationsource jims start 1 count 9 (matchstring|prefix)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm anti-spam statistics", "cmd": "show security utm anti-spam statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm anti-spam status", "cmd": "show security utm anti-spam status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm anti-virus statistics", "cmd": "show security utm anti-virus statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm anti-virus status", "cmd": "show security utm anti-virus status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm contentfiltering statistics", "cmd": "show security utm contentfiltering statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm custom-objects url-feed status", "cmd": "show security utm custom-objects url-feed status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm session", "cmd": "show security utm session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm status", "cmd": "show security utm status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm web-filtering category category", "cmd": "show security utm web-filtering category category", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm web-filtering category status", "cmd": "show security utm web-filtering category status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm web-filtering statistics", "cmd": "show security utm web-filtering statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Firewall", "title": "show security utm web-filtering status", "cmd": "show security utm web-filtering status", "desc": "show - Display device information" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "show security zones type", "cmd": "show security zones type", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show service user-identification authentication-source arubaclearpass user-query", "cmd": "show service user-identification authentication-source arubaclearpass user-query counters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show service user-identification authentication-source arubaclearpass user-query", "cmd": "show service user-identification authentication-source arubaclearpass user-query status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show service user-identification identity-management", "cmd": "show service user-identification identity-management", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services accounting", "cmd": "show services accounting", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services accounting aggregation template", "cmd": "show services accounting aggregation template", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services accounting flow", "cmd": "show services accounting flow", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services accounting flowdetail", "cmd": "show services accounting flowdetail", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services accounting memory", "cmd": "show services accounting memory", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services accounting packetsize-distribution", "cmd": "show services accounting packetsize-distribution", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services advanced-antimalware machine-learning-scan", "cmd": "show services advanced-antimalware machine-learning-scan", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services advanced-antimalware policy", "cmd": "show services advanced-antimalware policy", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services advanced-antimalware profile", "cmd": "show services advanced-antimalware profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services advanced-antimalware statistics", "cmd": "show services advanced-antimalware statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services advanced-antimalware status", "cmd": "show services advanced-antimalware status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services agf nas", "cmd": "show services agf nas", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services analytics agent", "cmd": "show services analytics agent", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services application identification application obsolete applications", "cmd": "show services application identification application obsolete applications", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services application-awareaccess-list flows", "cmd": "show services application-awareaccess-list flows", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services application-awareaccess-list statistics", "cmd": "show services application-awareaccess-list statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification application", "cmd": "show services applicationidentification application", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification application microapplications", "cmd": "show services applicationidentification application microapplications", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification application nonconfigurable", "cmd": "show services applicationidentification application nonconfigurable", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification application-systemcache", "cmd": "show services applicationidentification application-systemcache", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification commit-status", "cmd": "show services applicationidentification commit-status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification commit-status (Next Gen Services)", "cmd": "show services applicationidentification commit-status (Next Gen Services)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification counter", "cmd": "show services applicationidentification counter", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification group", "cmd": "show services applicationidentification group", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification packet-capture counters", "cmd": "show services applicationidentification packet-capture counters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification recent-appid-sigpackversions", "cmd": "show services applicationidentification recent-appid-sigpackversions", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification statistics applicationgroups", "cmd": "show services applicationidentification statistics applicationgroups", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification statistics applications", "cmd": "show services applicationidentification statistics applications", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification status", "cmd": "show services applicationidentification status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services applicationidentification version", "cmd": "show services applicationidentification version", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services cos statistics", "cmd": "show services cos statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services cos statistics (Next Gen Services)", "cmd": "show services cos statistics (Next Gen Services)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services crtp flows", "cmd": "show services crtp flows", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services dns-snooping cache", "cmd": "show services dns-snooping cache", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services dynamic-flowcapture content-destination", "cmd": "show services dynamic-flowcapture content-destination", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services dynamic-flowcapture control-source", "cmd": "show services dynamic-flowcapture control-source", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services fixed-wirelessaccess statistics", "cmd": "show services fixed-wirelessaccess statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services flow-collector file interface", "cmd": "show services flow-collector file interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services flow-collector input interface", "cmd": "show services flow-collector input interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services flow-collector interface", "cmd": "show services flow-collector interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ha detail", "cmd": "show services ha detail", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services hcm statistics", "cmd": "show services hcm statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services icap-redirect server status", "cmd": "show services icap-redirect server status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services icap-redirect statistic", "cmd": "show services icap-redirect statistic", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ids", "cmd": "show services ids", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services inband-flowtelemetry", "cmd": "show services inband-flowtelemetry", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services inline ip-reassembly statistics", "cmd": "show services inline ip-reassembly statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services inline nat pool", "cmd": "show services inline nat pool", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services inline softwire statistics", "cmd": "show services inline softwire statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services inline-monitoring feature-profile-mapping fpc-slot", "cmd": "show services inline-monitoring feature-profile-mapping fpc-slot", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ip-monitoring status", "cmd": "show services ip-monitoring status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "show services ipsec-vpn certificates", "cmd": "show services ipsec-vpn certificates", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "show services ipsec-vpn ike security-associations", "cmd": "show services ipsec-vpn ike security-associations", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services l2tp client", "cmd": "show services l2tp client", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services l2tp destination", "cmd": "show services l2tp destination", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services l2tp multilink", "cmd": "show services l2tp multilink", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show services l2tp radius", "cmd": "show services l2tp radius", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services l2tp session-limitgroup", "cmd": "show services l2tp session-limitgroup", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services l2tp summary", "cmd": "show services l2tp summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services l2tp tunnel", "cmd": "show services l2tp tunnel", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services l2tp tunnel-switch session", "cmd": "show services l2tp tunnel-switch session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services l2tp tunnel-switch summary", "cmd": "show services l2tp tunnel-switch summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services l2tp tunnel-switch tunnel", "cmd": "show services l2tp tunnel-switch tunnel", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services l2tp user", "cmd": "show services l2tp user", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services lrf collector statistics", "cmd": "show services lrf collector statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services lrf rule statistics", "cmd": "show services lrf rule statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services lrf statistics", "cmd": "show services lrf statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services lrf template", "cmd": "show services lrf template", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "show services mobile-edge anchor class-of-service", "cmd": "show services mobile-edge anchor class-of-service", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services mobile-edge resources call-admission-control statistics", "cmd": "show services mobile-edge resources call-admission-control statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services mobile-edge sessions", "cmd": "show services mobile-edge sessions", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services mobile-edge summary", "cmd": "show services mobile-edge summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services monitoring rpm history-results", "cmd": "show services monitoring rpm history-results", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services monitoring rpm probe-results", "cmd": "show services monitoring rpm probe-results", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services monitoring twamp client control-info", "cmd": "show services monitoring twamp client control-info", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services monitoring twamp client history-results", "cmd": "show services monitoring twamp client history-results", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services monitoring twamp client probe-results", "cmd": "show services monitoring twamp client probe-results", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services monitoring twamp client test-info", "cmd": "show services monitoring twamp client test-info", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services monitoring twamp server control-info", "cmd": "show services monitoring twamp server control-info", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services monitoring twamp server test-info", "cmd": "show services monitoring twamp server test-info", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "show services nat destination pool", "cmd": "show services nat destination pool", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "show services nat destination summary", "cmd": "show services nat destination summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services nat deterministicnat internal-host", "cmd": "show services nat deterministicnat internal-host", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services nat deterministicnat nat-port-block", "cmd": "show services nat deterministicnat nat-port-block", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show services nat ipv6-multicastinterfaces", "cmd": "show services nat ipv6-multicastinterfaces", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services nat pool", "cmd": "show services nat pool", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "show services nat source deterministic", "cmd": "show services nat source deterministic", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "show services nat source mappings address-pooling-paired", "cmd": "show services nat source mappings address-pooling-paired", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "show services nat source mappings summary", "cmd": "show services nat source mappings summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "show services nat source pool", "cmd": "show services nat source pool", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "show services nat source portblock", "cmd": "show services nat source portblock", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "show services nat source rule", "cmd": "show services nat source rule", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "show services nat source ruleapplication", "cmd": "show services nat source ruleapplication", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "show services nat source summary", "cmd": "show services nat source summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services paa status", "cmd": "show services paa status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services pcp statistics", "cmd": "show services pcp statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services policies", "cmd": "show services policies", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services policies detail", "cmd": "show services policies detail", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services rpm twamp client connection", "cmd": "show services rpm twamp client connection", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services rpm twamp client history-results", "cmd": "show services rpm twamp client history-results", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services rpm twamp client probe-results", "cmd": "show services rpm twamp client probe-results", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services rpm twamp client session", "cmd": "show services rpm twamp client session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services rpm twamp server connection", "cmd": "show services rpm twamp server connection", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services rpm twamp server session", "cmd": "show services rpm twamp server session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services screen-statistics service-set", "cmd": "show services screen-statistics service-set", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services security-intelligence category summary", "cmd": "show services security-intelligence category summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services security-intelligence dns-statistics", "cmd": "show services security-intelligence dns-statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services security-intelligence update status", "cmd": "show services security-intelligence update status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services security-metadatastreaming", "cmd": "show services security-metadatastreaming", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services securityintelligence", "cmd": "show services securityintelligence", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-redirect statistic", "cmd": "show services service-redirect statistic", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-set statistics ids drops", "cmd": "show services service-set statistics ids drops", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-sets cpuusage", "cmd": "show services service-sets cpuusage", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-sets memory-usage", "cmd": "show services service-sets memory-usage", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-sets plugins", "cmd": "show services service-sets plugins", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-sets statistic screen-drops (Next Gen Services)", "cmd": "show services service-sets statistic screen-drops (Next Gen Services)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-sets statistics ids session-limits counters", "cmd": "show services service-sets statistics ids session-limits counters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-sets statistics integrity-drops", "cmd": "show services service-sets statistics integrity-drops", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-sets statistics packet-drops", "cmd": "show services service-sets statistics packet-drops", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-sets statistics tcp", "cmd": "show services service-sets statistics tcp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-sets statistics tcp-mss", "cmd": "show services service-sets statistics tcp-mss", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services service-sets summary", "cmd": "show services service-sets summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services sessions", "cmd": "show services sessions", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "show services sessions (Aggregated Multiservices)", "cmd": "show services sessions (Aggregated Multiservices)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services sessions (Next Gen Services)", "cmd": "show services sessions (Next Gen Services)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services sessions analysis", "cmd": "show services sessions analysis", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services sessions analysis (USF)", "cmd": "show services sessions analysis (USF)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services sessions count", "cmd": "show services sessions count", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services sessions serviceset", "cmd": "show services sessions serviceset", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services sessions tcp-log", "cmd": "show services sessions tcp-log", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services softwire", "cmd": "show services softwire", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services softwire flows", "cmd": "show services softwire flows", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ssl droplogs", "cmd": "show services ssl droplogs", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ssl initiation counters", "cmd": "show services ssl initiation counters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ssl proxy certificate–cache statistics", "cmd": "show services ssl proxy certificate–cache statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ssl proxy profile", "cmd": "show services ssl proxy profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ssl proxy sessioncache entries", "cmd": "show services ssl proxy sessioncache entries", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ssl proxy sessioncache statistics", "cmd": "show services ssl proxy sessioncache statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ssl proxy status", "cmd": "show services ssl proxy status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ssl session", "cmd": "show services ssl session", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services ssl termination profile", "cmd": "show services ssl termination profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services stateful-firewall conversations", "cmd": "show services stateful-firewall conversations", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services stateful-firewall flow-analysis", "cmd": "show services stateful-firewall flow-analysis", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services stateful-firewall flows", "cmd": "show services stateful-firewall flows", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services stateful-firewall sipcall", "cmd": "show services stateful-firewall sipcall", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services stateful-firewall sipregister", "cmd": "show services stateful-firewall sipregister", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services stateful-firewall statistics application-protocol sip", "cmd": "show services stateful-firewall statistics application-protocol sip", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services stateful-firewall subscriber-analysis", "cmd": "show services stateful-firewall subscriber-analysis", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services tcp-log", "cmd": "show services tcp-log", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services tcp-log connections", "cmd": "show services tcp-log connections", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services traffic-load-balance statistics", "cmd": "show services traffic-load-balance statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show services unified-accesscontrol authentication-table", "cmd": "show services unified-accesscontrol authentication-table", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services unified-accesscontrol counters", "cmd": "show services unified-accesscontrol counters", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services unified-accesscontrol policies", "cmd": "show services unified-accesscontrol policies", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services unified-accesscontrol roles", "cmd": "show services unified-accesscontrol roles", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services unified-accesscontrol status", "cmd": "show services unified-accesscontrol status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services url-filter dnsresolution profile", "cmd": "show services url-filter dnsresolution profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services url-filter dnsresolution-statistics profile template", "cmd": "show services url-filter dnsresolution-statistics profile template", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services url-filter statistics profile template", "cmd": "show services url-filter statistics profile template", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services user-identification active-directory-access domaincontroller statu", "cmd": "show services user-identification active-directory-access domaincontroller status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services user-identification active-directory-access statistics", "cmd": "show services user-identification active-directory-access statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show services user-identification authentication-table", "cmd": "show services user-identification authentication-table", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services user-identification device-information table", "cmd": "show services user-identification device-information table", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services user-identification validate-statistics", "cmd": "show services user-identification validate-statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services video-monitoring mdi errors fpc-slot", "cmd": "show services video-monitoring mdi errors fpc-slot", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services video-monitoring mdi flows fpc-slot", "cmd": "show services video-monitoring mdi flows fpc-slot", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services video-monitoring mdi stats fpc-slot", "cmd": "show services video-monitoring mdi stats fpc-slot", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services web-filter dnsresolution profile", "cmd": "show services web-filter dnsresolution profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services web-filter dnsresolution-statistics profile template", "cmd": "show services web-filter dnsresolution-statistics profile template", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services web-filter secintelpolicy status", "cmd": "show services web-filter secintelpolicy status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services web-filter statistics dns-filter-template", "cmd": "show services web-filter statistics dns-filter-template", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services web-filter statistics profile", "cmd": "show services web-filter statistics profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services web-proxy dns forwarding-cache", "cmd": "show services web-proxy dns forwarding-cache", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services web-proxy dns global-cache statistics", "cmd": "show services web-proxy dns global-cache statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services web-proxy transparent-proxy session detail", "cmd": "show services web-proxy transparent-proxy session detail", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services web-proxy transparent-proxy session summary", "cmd": "show services web-proxy transparent-proxy session summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "show services web-proxy transparent-proxy statistics", "cmd": "show services web-proxy transparent-proxy statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show sflow collector", "cmd": "show sflow collector", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "show snmp health-monitor", "cmd": "show snmp health-monitor", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "show snmp inform-statistics", "cmd": "show snmp inform-statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "show snmp mib", "cmd": "show snmp mib", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "show snmp rmon history", "cmd": "show snmp rmon history", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "show snmp statistics", "cmd": "show snmp statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "show snmp v3", "cmd": "show snmp v3", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "Spanning-Tree", "title": "show spanning-tree bridge", "cmd": "show spanning-tree bridge", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "Spanning-Tree", "title": "show spanning-tree interface", "cmd": "show spanning-tree interface", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "Spanning-Tree", "title": "show spanning-tree mstp configuration", "cmd": "show spanning-tree mstp configuration", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "Spanning-Tree", "title": "show spanning-tree statistics", "cmd": "show spanning-tree statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "Spanning-Tree", "title": "show spanning-tree statistics bridge", "cmd": "show spanning-tree statistics bridge", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "Spanning-Tree", "title": "show spanning-tree statistics interface", "cmd": "show spanning-tree statistics interface", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "Spanning-Tree", "title": "show spanning-tree statistics message-queues", "cmd": "show spanning-tree statistics message-queues", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "Spanning-Tree", "title": "show spanning-tree stp-buffer see-all", "cmd": "show spanning-tree stp-buffer see-all", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show spring-traffic-engineering performance-measurement", "cmd": "show spring-traffic-engineering performance-measurement", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show spring-traffic-engineering performance-measurementsession", "cmd": "show spring-traffic-engineering performance-measurementsession", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show srv6 local-sids", "cmd": "show srv6 local-sids", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show subscribers", "cmd": "show subscribers", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show subscribers summary", "cmd": "show subscribers summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show synchronous-ethernet esmc statistics", "cmd": "show synchronous-ethernet esmc statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show synchronous-ethernet esmc transmit", "cmd": "show synchronous-ethernet esmc transmit", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show synchronous-ethernet global-information", "cmd": "show synchronous-ethernet global-information", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system alarms", "cmd": "show system alarms", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system anomalies gnf-id", "cmd": "show system anomalies gnf-id", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system applications (Junos OS Evolved)", "cmd": "show system applications (Junos OS Evolved)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system audit", "cmd": "show system audit", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system auto-snapshot", "cmd": "show system auto-snapshot", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system autoinstallation status", "cmd": "show system autoinstallation status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system boot console", "cmd": "show system boot console", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system boot-messages", "cmd": "show system boot-messages", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system buffers", "cmd": "show system buffers", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system commit server status", "cmd": "show system commit server status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system configuration database status", "cmd": "show system configuration database status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system configuration database usage", "cmd": "show system configuration database usage", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system configuration revision", "cmd": "show system configuration revision", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system core dumps (Junos OS Evolved)", "cmd": "show system core dumps (Junos OS Evolved)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system directory-usage", "cmd": "show system directory-usage", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system download", "cmd": "show system download", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system errors", "cmd": "show system errors", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system errors count", "cmd": "show system errors count", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system errors fru", "cmd": "show system errors fru", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system errors inactive", "cmd": "show system errors inactive", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system filesystem encryption status", "cmd": "show system filesystem encryption status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system firmware", "cmd": "show system firmware", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system firmware (Junos OS Evolved)", "cmd": "show system firmware (Junos OS Evolved)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system information", "cmd": "show system information", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system khms-stats", "cmd": "show system khms-stats", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system login lockout", "cmd": "show system login lockout", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system mac-addresses (JDM)", "cmd": "show system mac-addresses (JDM)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system max-smbios-version (JDM)", "cmd": "show system max-smbios-version (JDM)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system memory", "cmd": "show system memory", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system memory (JDM)", "cmd": "show system memory (JDM)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system monitor memory events", "cmd": "show system monitor memory events", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system monitor memory status", "cmd": "show system monitor memory status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system name-resolution", "cmd": "show system name-resolution", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system network (JDM)", "cmd": "show system network (JDM)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system node-attributes", "cmd": "show system node-attributes", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system nodes", "cmd": "show system nodes", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system packet-forwardingoptions hw-resource-monitor monitor-profile", "cmd": "show system packet-forwardingoptions hw-resource-monitor monitor-profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system packet-forwardingoptions hw-resource-monitor resource-list", "cmd": "show system packet-forwardingoptions hw-resource-monitor resource-list", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system packet-forwardingoptions hw-resource-monitor utilization-info", "cmd": "show system packet-forwardingoptions hw-resource-monitor utilization-info", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system packet-forwardingoptions hw-resource-utilizationinfo", "cmd": "show system packet-forwardingoptions hw-resource-utilizationinfo", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system reboot", "cmd": "show system reboot", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system resource-monitor summary", "cmd": "show system resource-monitor summary", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system rollback", "cmd": "show system rollback", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system security-profile", "cmd": "show system security-profile", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system security-profile secure-wire", "cmd": "show system security-profile secure-wire", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system security-profile security-log-stream-number", "cmd": "show system security-profile security-log-stream-number", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system security-profile security-log-stream-number detail", "cmd": "show system security-profile security-log-stream-number detail", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show system services dhcp binding", "cmd": "show system services dhcp binding", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show system services dhcp conflict", "cmd": "show system services dhcp conflict", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show system services dhcp relaystatistics", "cmd": "show system services dhcp relaystatistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show system services dhcp statistics", "cmd": "show system services dhcp statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system services dns dnsproxy", "cmd": "show system services dns dnsproxy", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system services dynamicdns", "cmd": "show system services dynamicdns", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system services outboundssh jefflee", "cmd": "show system services outboundssh jefflee", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system services servicedeployment", "cmd": "show system services servicedeployment", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system snapshot (Junos OS Evolved)", "cmd": "show system snapshot (Junos OS Evolved)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system snapshot (Junos OS with Upgraded FreeBSD)", "cmd": "show system snapshot (Junos OS with Upgraded FreeBSD)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system software", "cmd": "show system software", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system software add-restart (Junos OS Evolved)", "cmd": "show system software add-restart (Junos OS Evolved)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system software list", "cmd": "show system software list", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system software restorepoint-status", "cmd": "show system software restorepoint-status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system software upgrade status", "cmd": "show system software upgrade status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system software usbsoftware-version", "cmd": "show system software usbsoftware-version", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system statistics", "cmd": "show system statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system statistics icmp", "cmd": "show system statistics icmp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system statistics icmp6", "cmd": "show system statistics icmp6", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "show system statistics igmp", "cmd": "show system statistics igmp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system statistics ip", "cmd": "show system statistics ip", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system statistics ip6", "cmd": "show system statistics ip6", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system statistics netisr qdrops", "cmd": "show system statistics netisr qdrops", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system statistics netisr socket-drops", "cmd": "show system statistics netisr socket-drops", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system statistics tcp", "cmd": "show system statistics tcp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system storage satellite", "cmd": "show system storage satellite", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system subscribermanagement health", "cmd": "show system subscribermanagement health", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system subscribermanagement health services", "cmd": "show system subscribermanagement health services", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system subscribermanagement health services service", "cmd": "show system subscribermanagement health services service", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "show system subscribermanagement redundancy-state dhcp active-leasequery interfa", "cmd": "show system subscribermanagement redundancy-state dhcp active-leasequery interface", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system subscribermanagement resiliency", "cmd": "show system subscribermanagement resiliency", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system subscribermanagement statistics", "cmd": "show system subscribermanagement statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system virtual-memory", "cmd": "show system virtual-memory", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system visibility cpu", "cmd": "show system visibility cpu", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system visibility host", "cmd": "show system visibility host", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system visibility jcp", "cmd": "show system visibility jcp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system visibility memory", "cmd": "show system visibility memory", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system visibility network", "cmd": "show system visibility network", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system visibility vnf", "cmd": "show system visibility vnf", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show system ztp", "cmd": "show system ztp", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show task io", "cmd": "show task io", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show task logical-system-mux", "cmd": "show task logical-system-mux", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show task memory", "cmd": "show task memory", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show task replication", "cmd": "show task replication", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show tcp-forwarding status", "cmd": "show tcp-forwarding status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ted database", "cmd": "show ted database", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ted link", "cmd": "show ted link", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ted protocol", "cmd": "show ted protocol", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show ted spring-te-policy", "cmd": "show ted spring-te-policy", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show unified-edge tdf aaa radius client statistics", "cmd": "show unified-edge tdf aaa radius client statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show unified-edge tdf aaa radius client status", "cmd": "show unified-edge tdf aaa radius client status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show unified-edge tdf aaa radius network-element statistics", "cmd": "show unified-edge tdf aaa radius network-element statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show unified-edge tdf aaa radius server statistics", "cmd": "show unified-edge tdf aaa radius server statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show unified-edge tdf aaa radius server status", "cmd": "show unified-edge tdf aaa radius server status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "show unified-edge tdf aaa radius snoop-segment statistics", "cmd": "show unified-edge tdf aaa radius snoop-segment statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf addressassignment pool", "cmd": "show unified-edge tdf addressassignment pool", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf addressassignment service-mode", "cmd": "show unified-edge tdf addressassignment service-mode", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf call-rate statistics", "cmd": "show unified-edge tdf call-rate statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf diameter network-element statistics", "cmd": "show unified-edge tdf diameter network-element statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf diameter network-element status", "cmd": "show unified-edge tdf diameter network-element status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf diameter peer statistics", "cmd": "show unified-edge tdf diameter peer statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf diameter peer status", "cmd": "show unified-edge tdf diameter peer status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf domain service-mode", "cmd": "show unified-edge tdf domain service-mode", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf domain statistics", "cmd": "show unified-edge tdf domain statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf resourcemanager clients", "cmd": "show unified-edge tdf resourcemanager clients", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf servicemode", "cmd": "show unified-edge tdf servicemode", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf status", "cmd": "show unified-edge tdf status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show unified-edge tdf system interfaces service-mode", "cmd": "show unified-edge tdf system interfaces service-mode", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show uplink-failure-detection", "cmd": "show uplink-failure-detection", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show v4ov6-tunnels", "cmd": "show v4ov6-tunnels", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show validation session", "cmd": "show validation session", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis", "cmd": "show virtual-chassis", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis activetopology", "cmd": "show virtual-chassis activetopology", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis activetopology (MX Series Virtual Chassis)", "cmd": "show virtual-chassis activetopology (MX Series Virtual Chassis)", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis devicetopology", "cmd": "show virtual-chassis devicetopology", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis devicetopology (MX Series Virtual Chassis)", "cmd": "show virtual-chassis devicetopology (MX Series Virtual Chassis)", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis heartbeat (MX Series Virtual Chassis)", "cmd": "show virtual-chassis heartbeat (MX Series Virtual Chassis)", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis login", "cmd": "show virtual-chassis login", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis protocol adjacency", "cmd": "show virtual-chassis protocol adjacency", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis protocol adjacency (MX Series Virtual Chassis)", "cmd": "show virtual-chassis protocol adjacency (MX Series Virtual Chassis)", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis protocol database", "cmd": "show virtual-chassis protocol database", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis protocol database (MX Series Virtual Chassis)", "cmd": "show virtual-chassis protocol database (MX Series Virtual Chassis)", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis protocol interface", "cmd": "show virtual-chassis protocol interface", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis protocol interface (MX Series Virtual Chassis)", "cmd": "show virtual-chassis protocol interface (MX Series Virtual Chassis)", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis protocol route", "cmd": "show virtual-chassis protocol route", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis protocol route (MX Series Virtual Chassis)", "cmd": "show virtual-chassis protocol route (MX Series Virtual Chassis)", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis protocol statistics", "cmd": "show virtual-chassis protocol statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis protocol statistics (MX Series Virtual Chassis)", "cmd": "show virtual-chassis protocol statistics (MX Series Virtual Chassis)", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis status (MX Series Virtual Chassis)", "cmd": "show virtual-chassis status (MX Series Virtual Chassis)", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis vc-port", "cmd": "show virtual-chassis vc-port", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis vc-port (MX Series Virtual Chassis)", "cmd": "show virtual-chassis vc-port (MX Series Virtual Chassis)", "desc": "show - Display device information" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "show virtual-chassis vc-port statistics", "cmd": "show virtual-chassis vc-port statistics", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "show vlans (JDM)", "cmd": "show vlans (JDM)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show vlans evpn nd-table", "cmd": "show vlans evpn nd-table", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost bridge", "cmd": "show vmhost bridge", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost control-plane", "cmd": "show vmhost control-plane", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost crash", "cmd": "show vmhost crash", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost hard-disk-test", "cmd": "show vmhost hard-disk-test", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost hardware", "cmd": "show vmhost hardware", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost logs", "cmd": "show vmhost logs", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost management-if", "cmd": "show vmhost management-if", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost memory", "cmd": "show vmhost memory", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost network externalnetwork", "cmd": "show vmhost network externalnetwork", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost processes", "cmd": "show vmhost processes", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost snapshot", "cmd": "show vmhost snapshot", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost status", "cmd": "show vmhost status", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vmhost status (In-Chassis Model)", "cmd": "show vmhost status (In-Chassis Model)", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show vpls flood event-queue", "cmd": "show vpls flood event-queue", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show vpls flood instance", "cmd": "show vpls flood instance", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "show vpls mac-table", "cmd": "show vpls mac-table", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show vrrp track", "cmd": "show vrrp track", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show wlan access-points", "cmd": "show wlan access-points", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | display", "cmd": "show | display", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | display commit-scripts", "cmd": "show | display commit-scripts", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | display inheritance", "cmd": "show | display inheritance", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | display json", "cmd": "show | display json", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | display omit", "cmd": "show | display omit", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | display rfc5952", "cmd": "show | display rfc5952", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show | display xml", "cmd": "show | display xml", "desc": "show - Display device information" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "clear (ospf | ospf3) database", "cmd": "clear (ospf | ospf3) database", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "clear (ospf | ospf3) databaseprotection", "cmd": "clear (ospf | ospf3) databaseprotection", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "clear (ospf | ospf3) io-statistics", "cmd": "clear (ospf | ospf3) io-statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "clear (ospf | ospf3) neighbor", "cmd": "clear (ospf | ospf3) neighbor", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "clear (ospf | ospf3) overload", "cmd": "clear (ospf | ospf3) overload", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "clear (ospf | ospf3) statistics", "cmd": "clear (ospf | ospf3) statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "clear access-security slaacsnooping statistics", "cmd": "clear access-security slaacsnooping statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear accounting server statistics archival-transfer", "cmd": "clear accounting server statistics archival-transfer", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear amt statistics", "cmd": "clear amt statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear amt tunnel", "cmd": "clear amt tunnel", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear ancp access-loop", "cmd": "clear ancp access-loop", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear ancp statistics", "cmd": "clear ancp statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear ancp subscriber", "cmd": "clear ancp subscriber", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear arp", "cmd": "clear arp", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear auto-configuration interfaces", "cmd": "clear auto-configuration interfaces", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear auto-configuration interfaces interface-set", "cmd": "clear auto-configuration interfaces interface-set", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear bfd adaptation", "cmd": "clear bfd adaptation", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "clear bgp damping", "cmd": "clear bgp damping", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "clear bgp neighbor", "cmd": "clear bgp neighbor", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "clear bgp table", "cmd": "clear bgp table", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear bridge mac-ip-table", "cmd": "clear bridge mac-ip-table", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear bridge statistics", "cmd": "clear bridge statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear chassis alarms fabric degraded", "cmd": "clear chassis alarms fabric degraded", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "clear chassis cluster control-plane statistics", "cmd": "clear chassis cluster control-plane statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "clear chassis cluster data-plane statistics", "cmd": "clear chassis cluster data-plane statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "clear chassis cluster ip monitoring failure count ip address", "cmd": "clear chassis cluster ip monitoring failure count ip address", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "clear chassis cluster statistics", "cmd": "clear chassis cluster statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear chassis display message", "cmd": "clear chassis display message", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear chassis fpc errors", "cmd": "clear chassis fpc errors", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear chassis hardware history", "cmd": "clear chassis hardware history", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear chassis high-availability dataplane statistics", "cmd": "clear chassis high-availability dataplane statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear chassis high-availability information", "cmd": "clear chassis high-availability information", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear chassis sib errors", "cmd": "clear chassis sib errors", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear cli logical-system", "cmd": "clear cli logical-system", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcp relay binding", "cmd": "clear dhcp relay binding", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcp relay statistics", "cmd": "clear dhcp relay statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcp server binding", "cmd": "clear dhcp server binding", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcp snooping binding", "cmd": "clear dhcp snooping binding", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcp snooping statistics", "cmd": "clear dhcp snooping statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcp-security binding", "cmd": "clear dhcp-security binding", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 client binding", "cmd": "clear dhcpv6 client binding", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 client statistics", "cmd": "clear dhcpv6 client statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 relay activeleasequery statistics", "cmd": "clear dhcpv6 relay activeleasequery statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 relay binding", "cmd": "clear dhcpv6 relay binding", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 relay statistics", "cmd": "clear dhcpv6 relay statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 server activeleasequery statistics", "cmd": "clear dhcpv6 server activeleasequery statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 server binding", "cmd": "clear dhcpv6 server binding", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 server binding (Local Server)", "cmd": "clear dhcpv6 server binding (Local Server)", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 server lockoutentries", "cmd": "clear dhcpv6 server lockoutentries", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 server statistics", "cmd": "clear dhcpv6 server statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 server statistics (Local Server)", "cmd": "clear dhcpv6 server statistics (Local Server)", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear dhcpv6 snooping binding", "cmd": "clear dhcpv6 snooping binding", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear diameter peer", "cmd": "clear diameter peer", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear dot1x", "cmd": "clear dot1x", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear edge-virtual-bridging", "cmd": "clear edge-virtual-bridging", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear error bpdu interface", "cmd": "clear error bpdu interface", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "BGP", "title": "clear ethernet-switching evpn arptable", "cmd": "clear ethernet-switching evpn arptable", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "BGP", "title": "clear ethernet-switching evpn ndstatistics", "cmd": "clear ethernet-switching evpn ndstatistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "BGP", "title": "clear ethernet-switching evpn ndtable", "cmd": "clear ethernet-switching evpn ndtable", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "clear ethernet-switching layer2protocol-tunneling error", "cmd": "clear ethernet-switching layer2protocol-tunneling error", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "clear ethernet-switching mac-iptable", "cmd": "clear ethernet-switching mac-iptable", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "clear ethernet-switching porterror", "cmd": "clear ethernet-switching porterror", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "clear ethernet-switching recoverytimeout", "cmd": "clear ethernet-switching recoverytimeout", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VLAN", "title": "clear ethernet-switching recoverytimeout (SRX)", "cmd": "clear ethernet-switching recoverytimeout (SRX)", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "clear ethernet-switching statistics mac-learning", "cmd": "clear ethernet-switching statistics mac-learning", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "clear ethernet-switching table persistent-learning", "cmd": "clear ethernet-switching table persistent-learning", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "clear evpn duplicate-macsuppression", "cmd": "clear evpn duplicate-macsuppression", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "clear evpn mac-ip-table", "cmd": "clear evpn mac-ip-table", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "clear evpn statistics", "cmd": "clear evpn statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear extensible-subscriberservices counters", "cmd": "clear extensible-subscriberservices counters", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear extensible-subscriberservices sessions", "cmd": "clear extensible-subscriberservices sessions", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear fibre-channel fip enode", "cmd": "clear fibre-channel fip enode", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear fibre-channel fip vn-port", "cmd": "clear fibre-channel fip vn-port", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear fibre-channel proxy statistics", "cmd": "clear fibre-channel proxy statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "clear fip snooping enode", "cmd": "clear fip snooping enode", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VLAN", "title": "clear fip snooping vlan", "cmd": "clear fip snooping vlan", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear firewall", "cmd": "clear firewall", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear forwarding-options portmirroring instance family", "cmd": "clear forwarding-options portmirroring instance family", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "clear igmp membership", "cmd": "clear igmp membership", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "clear igmp statistics", "cmd": "clear igmp statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "clear ike security-associations", "cmd": "clear ike security-associations", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear ilmi statistics", "cmd": "clear ilmi statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear interfaces aeX forwardingoptions load-balance state", "cmd": "clear interfaces aeX forwardingoptions load-balance state", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear interfaces interface-set statistics", "cmd": "clear interfaces interface-set statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear interfaces interval", "cmd": "clear interfaces interval", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear interfaces mac-database", "cmd": "clear interfaces mac-database", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear ipv6 neighbors", "cmd": "clear ipv6 neighbors", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "clear isis database", "cmd": "clear isis database", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "clear isis overload", "cmd": "clear isis overload", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "clear isis statistics", "cmd": "clear isis statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "clear lacp statistics interfaces", "cmd": "clear lacp statistics interfaces", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear ldp neighbor", "cmd": "clear ldp neighbor", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear ldp session", "cmd": "clear ldp session", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear ldp statistics", "cmd": "clear ldp statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear lldp neighbors", "cmd": "clear lldp neighbors", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear lldp statistics", "cmd": "clear lldp statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear log", "cmd": "clear log", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear log (JDM)", "cmd": "clear log (JDM)", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear log (Next Gen Services)", "cmd": "clear log (Next Gen Services)", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear loop-detect enhanced interface", "cmd": "clear loop-detect enhanced interface", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear mac-vrf forwarding mac-iptable", "cmd": "clear mac-vrf forwarding mac-iptable", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear mac-vrf forwarding maclearning-log", "cmd": "clear mac-vrf forwarding maclearning-log", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear mac-vrf forwarding mactable", "cmd": "clear mac-vrf forwarding mactable", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear mac-vrf forwarding recoverytimeout", "cmd": "clear mac-vrf forwarding recoverytimeout", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear mac-vrf forwarding redundancy-group", "cmd": "clear mac-vrf forwarding redundancy-group", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear mld membership", "cmd": "clear mld membership", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear mld statistics", "cmd": "clear mld statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear mpls container-lsp", "cmd": "clear mpls container-lsp", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear mpls tunnel manager statistics", "cmd": "clear mpls tunnel manager statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "clear msdp cache", "cmd": "clear msdp cache", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "clear msdp statistics", "cmd": "clear msdp statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "clear multicast scope", "cmd": "clear multicast scope", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network access nas-5g statistics", "cmd": "clear network access nas-5g statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network-access aaa saml assertion-cache", "cmd": "clear network-access aaa saml assertion-cache", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network-access aaa saml idpmetadata", "cmd": "clear network-access aaa saml idpmetadata", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network-access aaa statistics", "cmd": "clear network-access aaa statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network-access aaa subscriber", "cmd": "clear network-access aaa subscriber", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network-access gx-plus replay", "cmd": "clear network-access gx-plus replay", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network-access gx-plus statistics", "cmd": "clear network-access gx-plus statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network-access ocs statistics", "cmd": "clear network-access ocs statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network-access pcrf", "cmd": "clear network-access pcrf", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network-access requests pending", "cmd": "clear network-access requests pending", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network-access requests statistics", "cmd": "clear network-access requests statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear network-access securidnode-secret-file", "cmd": "clear network-access securidnode-secret-file", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear node reboot", "cmd": "clear node reboot", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear oam ethernet connectivityfault-management continuitymeasurement", "cmd": "clear oam ethernet connectivityfault-management continuitymeasurement", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear oam ethernet connectivityfault-management event", "cmd": "clear oam ethernet connectivityfault-management event", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "QoS", "title": "clear oam ethernet connectivityfault-management policer", "cmd": "clear oam ethernet connectivityfault-management policer", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear oam ethernet connectivityfault-management statistics", "cmd": "clear oam ethernet connectivityfault-management statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear oam ethernet connectivityfault-management synthetic-lossmeasurement", "cmd": "clear oam ethernet connectivityfault-management synthetic-lossmeasurement", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear oam ethernet link-faultmanagement state", "cmd": "clear oam ethernet link-faultmanagement state", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear oam ethernet link-faultmanagement statistics", "cmd": "clear oam ethernet link-faultmanagement statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear path-computation-client statistics", "cmd": "clear path-computation-client statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear performance-monitoring mpls lsp", "cmd": "clear performance-monitoring mpls lsp", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "clear pim join", "cmd": "clear pim join", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "clear pim join-distribution", "cmd": "clear pim join-distribution", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "clear pim register", "cmd": "clear pim register", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "clear pim snooping join", "cmd": "clear pim snooping join", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "clear pim statistics", "cmd": "clear pim statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear policy statistics", "cmd": "clear policy statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "clear pppoe statistics", "cmd": "clear pppoe statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear ptp performance-monitor measurement all-counters", "cmd": "clear ptp performance-monitor measurement all-counters", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear rip general-statistics", "cmd": "clear rip general-statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear ripng general-statistics", "cmd": "clear ripng general-statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear ripng statistics", "cmd": "clear ripng statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear rsvp statistics", "cmd": "clear rsvp statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security advance-policybased-routing sla statistics", "cmd": "clear security advance-policybased-routing sla statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security alarms", "cmd": "clear security alarms", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security alg sccp calls", "cmd": "clear security alg sccp calls", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security alg sccp counters", "cmd": "clear security alg sccp counters", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security alg sip calls", "cmd": "clear security alg sip calls", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security application-firewall rule-set statistics", "cmd": "clear security application-firewall rule-set statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security application-firewall rule-set statistics logical-system", "cmd": "clear security application-firewall rule-set statistics logical-system", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security datapath-debug counters", "cmd": "clear security datapath-debug counters", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security dns-cache", "cmd": "clear security dns-cache", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "clear security firewallauthentication history", "cmd": "clear security firewallauthentication history", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "clear security firewallauthentication history address", "cmd": "clear security firewallauthentication history address", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "clear security firewallauthentication history identifier", "cmd": "clear security firewallauthentication history identifier", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "clear security firewallauthentication users", "cmd": "clear security firewallauthentication users", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "clear security firewallauthentication users identifier", "cmd": "clear security firewallauthentication users identifier", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow ip-action", "cmd": "clear security flow ip-action", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow service-offload virtual-offload statistics (CSDS)", "cmd": "clear security flow service-offload virtual-offload statistics (CSDS)", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session", "cmd": "clear security flow session", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session IDP", "cmd": "clear security flow session IDP", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session application", "cmd": "clear security flow session application", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session application-traffic-control", "cmd": "clear security flow session application-traffic-control", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session destination-port", "cmd": "clear security flow session destination-port", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session destination-prefix", "cmd": "clear security flow session destination-prefix", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session gbp-srctag", "cmd": "clear security flow session gbp-srctag", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session gbpdst-tag", "cmd": "clear security flow session gbpdst-tag", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session interface", "cmd": "clear security flow session interface", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session nat", "cmd": "clear security flow session nat", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session protocol", "cmd": "clear security flow session protocol", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session resource-manager", "cmd": "clear security flow session resource-manager", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session services-offload", "cmd": "clear security flow session services-offload", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session sessionidentifier", "cmd": "clear security flow session sessionidentifier", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session sourceport", "cmd": "clear security flow session sourceport", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security flow session sourceprefix", "cmd": "clear security flow session sourceprefix", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security forward-options mirror filter", "cmd": "clear security forward-options mirror filter", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security group-vpn member group", "cmd": "clear security group-vpn member group", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "clear security group-vpn member ike security-associations", "cmd": "clear security group-vpn member ike security-associations", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "clear security group-vpn member ipsec security-associations", "cmd": "clear security group-vpn member ipsec security-associations", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "clear security group-vpn member ipsec statistics", "cmd": "clear security group-vpn member ipsec statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security group-vpn member kek security-associations", "cmd": "clear security group-vpn member kek security-associations", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security gtp counters", "cmd": "clear security gtp counters", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security host-vpn securityassociations", "cmd": "clear security host-vpn securityassociations", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp", "cmd": "clear security idp", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp attack table", "cmd": "clear security idp attack table", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp counters application-identification", "cmd": "clear security idp counters application-identification", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp counters httpdecoder", "cmd": "clear security idp counters httpdecoder", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp counters ips", "cmd": "clear security idp counters ips", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp counters log", "cmd": "clear security idp counters log", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp counters memory", "cmd": "clear security idp counters memory", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp counters packetlog", "cmd": "clear security idp counters packetlog", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp counters pdfdecoder", "cmd": "clear security idp counters pdfdecoder", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp counters policymanager", "cmd": "clear security idp counters policymanager", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp counters sslinspection", "cmd": "clear security idp counters sslinspection", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp counters tcpreassembler", "cmd": "clear security idp counters tcpreassembler", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security idp ssl-inspection session-id-cache", "cmd": "clear security idp ssl-inspection session-id-cache", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "clear security ike active-peer aaausername", "cmd": "clear security ike active-peer aaausername", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "clear security ike peers", "cmd": "clear security ike peers", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "clear security ike securityassociations", "cmd": "clear security ike securityassociations", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "clear security ike stats", "cmd": "clear security ike stats", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "clear security ipsec statistics", "cmd": "clear security ipsec statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "VPN", "title": "clear security ipsec tunnel-eventsstatistics", "cmd": "clear security ipsec tunnel-eventsstatistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security log", "cmd": "clear security log", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security log file", "cmd": "clear security log file", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "clear security nat source persistent-nat-table", "cmd": "clear security nat source persistent-nat-table", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "clear security nat statistics destination pool", "cmd": "clear security nat statistics destination pool", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "clear security nat statistics destination rule", "cmd": "clear security nat statistics destination rule", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "clear security nat statistics source pool", "cmd": "clear security nat statistics source pool", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "clear security nat statistics source rule", "cmd": "clear security nat statistics source rule", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "clear security nat statistics static rule", "cmd": "clear security nat statistics static rule", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security pki ca-certificate", "cmd": "clear security pki ca-certificate", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security pki certificaterequest", "cmd": "clear security pki certificaterequest", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security pki crl", "cmd": "clear security pki crl", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security pki key-pair", "cmd": "clear security pki key-pair", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security pki node-local keypair", "cmd": "clear security pki node-local keypair", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security pki node-local localcertificate", "cmd": "clear security pki node-local localcertificate", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security pki statistics", "cmd": "clear security pki statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "clear security policies fileserialization counters", "cmd": "clear security policies fileserialization counters", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security screen statistics", "cmd": "clear security screen statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security screen statistics interface", "cmd": "clear security screen statistics interface", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security screen statistics zone", "cmd": "clear security screen statistics zone", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "clear security user-identification local-authentication-table", "cmd": "clear security user-identification local-authentication-table", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security utm antivirus statistics", "cmd": "clear security utm antivirus statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security utm content-filtering statistics", "cmd": "clear security utm content-filtering statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear security utm session", "cmd": "clear security utm session", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear service l2tp session routinginstance", "cmd": "clear service l2tp session routinginstance", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear service user-identification identity-management counter", "cmd": "clear service user-identification identity-management counter", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services accounting statistics inline-jflow", "cmd": "clear services accounting statistics inline-jflow", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services advanced-antimalware statistics", "cmd": "clear services advanced-antimalware statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services agf nas statistics", "cmd": "clear services agf nas statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services agf ngap amf", "cmd": "clear services agf ngap amf", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services alg statistics", "cmd": "clear services alg statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services application-awareaccess-list statistics", "cmd": "clear services application-awareaccess-list statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services applicationidentification application-statistics cumulative", "cmd": "clear services applicationidentification application-statistics cumulative", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services applicationidentification application-statistics interval", "cmd": "clear services applicationidentification application-statistics interval", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services applicationidentification application-systemcache", "cmd": "clear services applicationidentification application-systemcache", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services applicationidentification application-systemcache (Junos OS)", "cmd": "clear services applicationidentification application-systemcache (Junos OS)", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services applicationidentification counter (Values)", "cmd": "clear services applicationidentification counter (Values)", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services applicationidentification packet-capture counters", "cmd": "clear services applicationidentification packet-capture counters", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services applicationidentification statistics", "cmd": "clear services applicationidentification statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services crtp statistics", "cmd": "clear services crtp statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services dynamic-flowcapture", "cmd": "clear services dynamic-flowcapture", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services flow-collector statistics", "cmd": "clear services flow-collector statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services icap-redirect statistic", "cmd": "clear services icap-redirect statistic", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services ids", "cmd": "clear services ids", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services ids destinationtable", "cmd": "clear services ids destinationtable", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services ids pair-table", "cmd": "clear services ids pair-table", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services ids source-table", "cmd": "clear services ids source-table", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services inline nat pool", "cmd": "clear services inline nat pool", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services inline softwire statistics", "cmd": "clear services inline softwire statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services inline-monitoring statistics", "cmd": "clear services inline-monitoring statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "clear services ipsec-vpn certificates", "cmd": "clear services ipsec-vpn certificates", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "clear services ipsec-vpn ike security-associations", "cmd": "clear services ipsec-vpn ike security-associations", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services l2tp destination", "cmd": "clear services l2tp destination", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services l2tp destination lockout", "cmd": "clear services l2tp destination lockout", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services l2tp destination statistics", "cmd": "clear services l2tp destination statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services l2tp multilink", "cmd": "clear services l2tp multilink", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services l2tp session", "cmd": "clear services l2tp session", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services l2tp session statistics", "cmd": "clear services l2tp session statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services l2tp tunnel", "cmd": "clear services l2tp tunnel", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services lrf statistics", "cmd": "clear services lrf statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services monitoring twamp server control-connection", "cmd": "clear services monitoring twamp server control-connection", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NAT", "title": "clear services nat source mappings", "cmd": "clear services nat source mappings", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services redundancy-set lastsaved-state id", "cmd": "clear services redundancy-set lastsaved-state id", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services rpm rfc2544benchmarking", "cmd": "clear services rpm rfc2544benchmarking", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services rpm twamp server connection", "cmd": "clear services rpm twamp server connection", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services security-intelligence dns-statistics", "cmd": "clear services security-intelligence dns-statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services security-metadatastreaming", "cmd": "clear services security-metadatastreaming", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services service-set statistics ids drops", "cmd": "clear services service-set statistics ids drops", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services service-sets statistics ids session-limits counters", "cmd": "clear services service-sets statistics ids session-limits counters", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services service-sets statistics integrity-drops", "cmd": "clear services service-sets statistics integrity-drops", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services service-sets statistics packet-drops", "cmd": "clear services service-sets statistics packet-drops", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services sessions", "cmd": "clear services sessions", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services sessions analysis", "cmd": "clear services sessions analysis", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services stateful-firewall flows", "cmd": "clear services stateful-firewall flows", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services stateful-firewall sipcall", "cmd": "clear services stateful-firewall sipcall", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services stateful-firewall sipregister", "cmd": "clear services stateful-firewall sipregister", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services stateful-firewall statistics", "cmd": "clear services stateful-firewall statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services user-identification active-directory-access", "cmd": "clear services user-identification active-directory-access", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services user-identification logical-domain-identitymanagement counters", "cmd": "clear services user-identification logical-domain-identitymanagement counters", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services video-monitoring mdi statistics fpc-slot", "cmd": "clear services video-monitoring mdi statistics fpc-slot", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear services web-proxy transparent-proxy statistics", "cmd": "clear services web-proxy transparent-proxy statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear sflow collector statistics (QFX Series)", "cmd": "clear sflow collector statistics (QFX Series)", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear sflow collectors statistics", "cmd": "clear sflow collectors statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "clear snmp history", "cmd": "clear snmp history", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "clear snmp statistics", "cmd": "clear snmp statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "Spanning-Tree", "title": "clear spanning-tree statistics", "cmd": "clear spanning-tree statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "Spanning-Tree", "title": "clear spanning-tree statistics bridge", "cmd": "clear spanning-tree statistics bridge", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "Spanning-Tree", "title": "clear spanning-tree stp-buffer", "cmd": "clear spanning-tree stp-buffer", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear subscribers", "cmd": "clear subscribers", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear subscribers interfaces", "cmd": "clear subscribers interfaces", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear synchronous-ethernet esmc statistics", "cmd": "clear synchronous-ethernet esmc statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear synchronous-ethernet waitto-restore", "cmd": "clear synchronous-ethernet waitto-restore", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear system commit prepared", "cmd": "clear system commit prepared", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear system login lockout", "cmd": "clear system login lockout", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear system reboot", "cmd": "clear system reboot", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear system services dhcp binding", "cmd": "clear system services dhcp binding", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear system services dhcp conflict", "cmd": "clear system services dhcp conflict", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "clear system services dhcp statistics", "cmd": "clear system services dhcp statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear system services dns dnsproxy", "cmd": "clear system services dns dnsproxy", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear system subscribermanagement statistics", "cmd": "clear system subscribermanagement statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear trace", "cmd": "clear trace", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "clear unified-edge tdf aaa radius client statistics", "cmd": "clear unified-edge tdf aaa radius client statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "clear unified-edge tdf aaa radius network-element statistics", "cmd": "clear unified-edge tdf aaa radius network-element statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "clear unified-edge tdf aaa radius server statistics", "cmd": "clear unified-edge tdf aaa radius server statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "clear unified-edge tdf aaa radius snoop-segment statistics", "cmd": "clear unified-edge tdf aaa radius snoop-segment statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear unified-edge tdf addressassignment pool", "cmd": "clear unified-edge tdf addressassignment pool", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear unified-edge tdf addressassignment statistics", "cmd": "clear unified-edge tdf addressassignment statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear unified-edge tdf calladmission-control statistics", "cmd": "clear unified-edge tdf calladmission-control statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear unified-edge tdf diameter network-element statistics", "cmd": "clear unified-edge tdf diameter network-element statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear unified-edge tdf diameter pcc-gx statistics", "cmd": "clear unified-edge tdf diameter pcc-gx statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear unified-edge tdf diameter peer statistics", "cmd": "clear unified-edge tdf diameter peer statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear unified-edge tdf statistics", "cmd": "clear unified-edge tdf statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear unified-edge tdf subscribers peer", "cmd": "clear unified-edge tdf subscribers peer", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear validation database", "cmd": "clear validation database", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "clear virtual-chassis vc-port statistics", "cmd": "clear virtual-chassis vc-port statistics", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear vpls mac-address", "cmd": "clear vpls mac-address", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "clear vpls mac-table", "cmd": "clear vpls mac-table", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear vrrp", "cmd": "clear vrrp", "desc": "clear - Reset statistics and tables" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request", "cmd": "request", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request access-security routeradvertisement-guard-block", "cmd": "request access-security routeradvertisement-guard-block", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request access-security routeradvertisement-guard-forward", "cmd": "request access-security routeradvertisement-guard-forward", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request access-security routeradvertisement-guard-learn interface", "cmd": "request access-security routeradvertisement-guard-learn interface", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "request access-security slaacsnooping unblock", "cmd": "request access-security slaacsnooping unblock", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request ancp oam interface", "cmd": "request ancp oam interface", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request ancp oam neighbor", "cmd": "request ancp oam neighbor", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request ancp oam port-down", "cmd": "request ancp oam port-down", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request ancp oam port-up", "cmd": "request ancp oam port-up", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request app-engine cleanup", "cmd": "request app-engine cleanup", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request app-engine file-copy (crash | log) from-jhost to-vjunos", "cmd": "request app-engine file-copy (crash | log) from-jhost to-vjunos", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis afeb", "cmd": "request chassis afeb", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis cb", "cmd": "request chassis cb", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis ccg", "cmd": "request chassis ccg", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis cfeb", "cmd": "request chassis cfeb", "desc": "request - System-level requests" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "request chassis cluster configuration-synchronize", "cmd": "request chassis cluster configuration-synchronize", "desc": "request - System-level requests" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "request chassis cluster failover redundancy-group", "cmd": "request chassis cluster failover redundancy-group", "desc": "request - System-level requests" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "request chassis cluster failover reset", "cmd": "request chassis cluster failover reset", "desc": "request - System-level requests" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "request chassis cluster in-service", "cmd": "request chassis cluster in-service", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis device-mode upgrade abort (ISSU)", "cmd": "request chassis device-mode upgrade abort (ISSU)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis device-mode", "cmd": "request chassis device-mode", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis fabric fpc", "cmd": "request chassis fabric fpc", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis feb", "cmd": "request chassis feb", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis fpc optical-module amplifier-chain ila firmwareupgrade", "cmd": "request chassis fpc optical-module amplifier-chain ila firmwareupgrade", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis fpc optical-module amplifier-chain ila hard-reset", "cmd": "request chassis fpc optical-module amplifier-chain ila hard-reset", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis fpc optical-module firmware-upgrade", "cmd": "request chassis fpc optical-module firmware-upgrade", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis fpc slc", "cmd": "request chassis fpc slc", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis fpm resync", "cmd": "request chassis fpm resync", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis high-availability failover services-redundancygroup", "cmd": "request chassis high-availability failover services-redundancygroup", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis internal-ssh", "cmd": "request chassis internal-ssh", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis mcs", "cmd": "request chassis mcs", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis optics", "cmd": "request chassis optics", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis pic-mode", "cmd": "request chassis pic-mode", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis routing-engine hard-disk-test", "cmd": "request chassis routing-engine hard-disk-test", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis routing-engine master", "cmd": "request chassis routing-engine master", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis satellite enable", "cmd": "request chassis satellite enable", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis satellite install", "cmd": "request chassis satellite install", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis satellite login", "cmd": "request chassis satellite login", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis satellite reboot", "cmd": "request chassis satellite reboot", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis satellite restart", "cmd": "request chassis satellite restart", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis satellite shellcommand", "cmd": "request chassis satellite shellcommand", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis scg", "cmd": "request chassis scg", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis sfm", "cmd": "request chassis sfm", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis spmb restart", "cmd": "request chassis spmb restart", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis synchronization mode", "cmd": "request chassis synchronization mode", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis synchronization switch", "cmd": "request chassis synchronization switch", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request chassis system-mode", "cmd": "request chassis system-mode", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request component login", "cmd": "request component login", "desc": "request - System-level requests" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "request csds delete-vsrx", "cmd": "request csds delete-vsrx", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request csds jdm", "cmd": "request csds jdm", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request csds sync-controller", "cmd": "request csds sync-controller", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request debug information", "cmd": "request debug information", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "request dhcp client renew", "cmd": "request dhcp client renew", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "request dhcp relay bulkleasequery", "cmd": "request dhcp relay bulkleasequery", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "request dhcp relay leasequery", "cmd": "request dhcp relay leasequery", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "request dhcpv6 client renew", "cmd": "request dhcpv6 client renew", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "request dhcpv6 relay bulkleasequery", "cmd": "request dhcpv6 relay bulkleasequery", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request diagnostics tdr", "cmd": "request diagnostics tdr", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request extension-service restartdaemonize-app", "cmd": "request extension-service restartdaemonize-app", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request fabric administration director-group change-master", "cmd": "request fabric administration director-group change-master", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request fabric administration power-off interconnect-device fpc", "cmd": "request fabric administration power-off interconnect-device fpc", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request fabric administration power-off node-device", "cmd": "request fabric administration power-off node-device", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request fabric administration system mac-pool add", "cmd": "request fabric administration system mac-pool add", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request flight-recorder set highcpu", "cmd": "request flight-recorder set highcpu", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request forwarding-options portmirroring instance family selfmirror-start", "cmd": "request forwarding-options portmirroring instance family selfmirror-start", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request forwarding-options portmirroring instance family selfmirror-stop", "cmd": "request forwarding-options portmirroring instance family selfmirror-stop", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request interface (revert | switchover) (Adaptive Services)", "cmd": "request interface (revert | switchover) (Adaptive Services)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "request interface (revert | switchover) (Aggregated Ethernet Link Protection)", "cmd": "request interface (revert | switchover) (Aggregated Ethernet Link Protection)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "request interface (revert | switchover) (Aggregated Inline Service Interfaces)", "cmd": "request interface (revert | switchover) (Aggregated Inline Service Interfaces)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request interface bounce", "cmd": "request interface bounce", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "request interface load-balancing revert (Aggregated Multiservices)", "cmd": "request interface load-balancing revert (Aggregated Multiservices)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request interface mc-ae switchover (Multichassis Link Aggregation)", "cmd": "request interface mc-ae switchover (Multichassis Link Aggregation)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request interface optics-reset", "cmd": "request interface optics-reset", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "request interface rebalance (Aggregated Ethernet for Subscriber Management)", "cmd": "request interface rebalance (Aggregated Ethernet for Subscriber Management)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "request ipsec switch", "cmd": "request ipsec switch", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request jnu role", "cmd": "request jnu role", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request jnu satellite sync", "cmd": "request jnu satellite sync", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request jnu schema merge", "cmd": "request jnu schema merge", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request l2circuit-switchover", "cmd": "request l2circuit-switchover", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "EtherChannel", "title": "request lacp link-switchover", "cmd": "request lacp link-switchover", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request message", "cmd": "request message", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request modem wireless createprofile", "cmd": "request modem wireless createprofile", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request modem wireless fota", "cmd": "request modem wireless fota", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request modem wireless simunlock", "cmd": "request modem wireless simunlock", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "request mpls container-lsp", "cmd": "request mpls container-lsp", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "request mpls lsp adjustautobandwidth", "cmd": "request mpls lsp adjustautobandwidth", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request network-access aaa accounting", "cmd": "request network-access aaa accounting", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request network-access aaa replay pending-accounting-stops", "cmd": "request network-access aaa replay pending-accounting-stops", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request network-access aaa subscriber add session-id", "cmd": "request network-access aaa subscriber add session-id", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request network-access aaa subscriber modify session-id", "cmd": "request network-access aaa subscriber modify session-id", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request network-access aaa subscriber set session-id", "cmd": "request network-access aaa subscriber set session-id", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request node halt (Junos OS Evolved)", "cmd": "request node halt (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request node power-off (Junos OS Evolved)", "cmd": "request node power-off (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request node power-on (Junos OS Evolved)", "cmd": "request node power-on (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request node reboot (re0 | re1) (Junos OS Evolved)", "cmd": "request node reboot (re0 | re1) (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request packet-capture start", "cmd": "request packet-capture start", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request packet-capture stop", "cmd": "request packet-capture stop", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request path-computation-client active-pce", "cmd": "request path-computation-client active-pce", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "request pim multicast-tunnel rebalance", "cmd": "request pim multicast-tunnel rebalance", "desc": "request - System-level requests" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "request pppoe connect", "cmd": "request pppoe connect", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request protection-group ethernet-aps", "cmd": "request protection-group ethernet-aps", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request protection-group ethernet-ring", "cmd": "request protection-group ethernet-ring", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request redundant-power-system multi-backup", "cmd": "request redundant-power-system multi-backup", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request restart packet-forwardingengine", "cmd": "request restart packet-forwardingengine", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request routing-engine", "cmd": "request routing-engine", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security certificate enroll (Unsigned)", "cmd": "request security certificate enroll (Unsigned)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security datapath-debug capture start", "cmd": "request security datapath-debug capture start", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security datapath-debug capture stop", "cmd": "request security datapath-debug capture stop", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security idp jistconversion", "cmd": "request security idp jistconversion", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security idp security package rollback", "cmd": "request security idp security package rollback", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security idp securitypackage download", "cmd": "request security idp securitypackage download", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security idp securitypackage install", "cmd": "request security idp securitypackage install", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security idp securitypackage offline-download", "cmd": "request security idp securitypackage offline-download", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security idp ssl-inspection key delete", "cmd": "request security idp ssl-inspection key delete", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security idp storagecleanup", "cmd": "request security idp storagecleanup", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security integrity", "cmd": "request security integrity", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security key-pair", "cmd": "request security key-pair", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki ca-certificate ca-profile-group load", "cmd": "request security pki ca-certificate ca-profile-group load", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki ca-certificate enroll", "cmd": "request security pki ca-certificate enroll", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki ca-certificate load", "cmd": "request security pki ca-certificate load", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki ca-certificate load (Security)", "cmd": "request security pki ca-certificate load (Security)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki ca-certificate verify", "cmd": "request security pki ca-certificate verify", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki ca-certificate verify (Security)", "cmd": "request security pki ca-certificate verify (Security)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki ca-profilegroup-status", "cmd": "request security pki ca-profilegroup-status", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki crl load", "cmd": "request security pki crl load", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki crl load (Security)", "cmd": "request security pki crl load (Security)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki generate-keypair", "cmd": "request security pki generate-keypair", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki generate-keypair (Security)", "cmd": "request security pki generate-keypair (Security)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki generatecertificate-request", "cmd": "request security pki generatecertificate-request", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki generatecertificate-request (Security)", "cmd": "request security pki generatecertificate-request (Security)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki key-pair export", "cmd": "request security pki key-pair export", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki localcertificate enroll cmpv2", "cmd": "request security pki localcertificate enroll cmpv2", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki localcertificate export", "cmd": "request security pki localcertificate export", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki localcertificate generate-self-signed", "cmd": "request security pki localcertificate generate-self-signed", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki localcertificate generate-self-signed (Security)", "cmd": "request security pki localcertificate generate-self-signed (Security)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki localcertificate load", "cmd": "request security pki localcertificate load", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki localcertificate re-enroll cmpv2", "cmd": "request security pki localcertificate re-enroll cmpv2", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki node-local generate-certificate-request", "cmd": "request security pki node-local generate-certificate-request", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki node-local generate-key-pair", "cmd": "request security pki node-local generate-key-pair", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki node-local key-pair export", "cmd": "request security pki node-local key-pair export", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki node-local local-certificate enroll", "cmd": "request security pki node-local local-certificate enroll", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki node-local local-certificate verify", "cmd": "request security pki node-local local-certificate verify", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security pki verifyintegrity-status", "cmd": "request security pki verifyintegrity-status", "desc": "request - System-level requests" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "Firewall", "title": "request security policies check", "cmd": "request security policies check", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "request security re-distribution ipsec-vpn", "cmd": "request security re-distribution ipsec-vpn", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security ssh key-pairidentity generate", "cmd": "request security ssh key-pairidentity generate", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "request security ssh passwordless-authentication (Junos OS Evolved)", "cmd": "request security ssh passwordless-authentication (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security system-keystore unlink", "cmd": "request security system-keystore unlink", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security tpm masterencryption-password set", "cmd": "request security tpm masterencryption-password set", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "request security user-identification local-authentication-table delete", "cmd": "request security user-identification local-authentication-table delete", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security utm anti-virus avira-engine", "cmd": "request security utm anti-virus avira-engine", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security utm anti-virus juniper-express-engine", "cmd": "request security utm anti-virus juniper-express-engine", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security utm customobjects url-feed update", "cmd": "request security utm customobjects url-feed update", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security utm customobjects url-feed update feed-name force", "cmd": "request security utm customobjects url-feed update feed-name force", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security utm web-filtering category download [version]", "cmd": "request security utm web-filtering category download [version]", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security utm web-filtering category download-install [version]", "cmd": "request security utm web-filtering category download-install [version]", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security utm web-filtering category migrate-to-ng-juniper", "cmd": "request security utm web-filtering category migrate-to-ng-juniper", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security utm web-filtering category uninstall", "cmd": "request security utm web-filtering category uninstall", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security utm web-filtering custom-page reload", "cmd": "request security utm web-filtering custom-page reload", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request security utm web-filtering recategorize", "cmd": "request security utm web-filtering recategorize", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request server authenticate-peerserver", "cmd": "request server authenticate-peerserver", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services advanced-antimalware data-connection", "cmd": "request services advanced-antimalware data-connection", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services advanced-antimalware redirect-file", "cmd": "request services advanced-antimalware redirect-file", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services applicationidentification download", "cmd": "request services applicationidentification download", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services applicationidentification download status", "cmd": "request services applicationidentification download status", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services applicationidentification install status", "cmd": "request services applicationidentification install status", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services applicationidentification offline-download package-path", "cmd": "request services applicationidentification offline-download package-path", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services applicationidentification rollback status", "cmd": "request services applicationidentification rollback status", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services applicationidentification uninstall", "cmd": "request services applicationidentification uninstall", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services applicationidentification uninstall status", "cmd": "request services applicationidentification uninstall status", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services flow-collector change-destination primary interface", "cmd": "request services flow-collector change-destination primary interface", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services flow-collector change-destination secondary interface", "cmd": "request services flow-collector change-destination secondary interface", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services flow-collector test-file-transfer", "cmd": "request services flow-collector test-file-transfer", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services ip-monitoring preempt-restore policy", "cmd": "request services ip-monitoring preempt-restore policy", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services l2tp destination unlock", "cmd": "request services l2tp destination unlock", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services monitoring twamp client", "cmd": "request services monitoring twamp client", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services paa install", "cmd": "request services paa install", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services paa uninstall", "cmd": "request services paa uninstall", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services redundancy-set trigger", "cmd": "request services redundancy-set trigger", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services remote-devicemanagement reconfigure servicedevice", "cmd": "request services remote-devicemanagement reconfigure servicedevice", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services remote-devicemanagement reload-dictionary", "cmd": "request services remote-devicemanagement reload-dictionary", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services rpm twamp", "cmd": "request services rpm twamp", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services static-subscribers login group", "cmd": "request services static-subscribers login group", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services static-subscribers login interface", "cmd": "request services static-subscribers login interface", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services static-subscribers logout group", "cmd": "request services static-subscribers logout group", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services static-subscribers logout interface", "cmd": "request services static-subscribers logout interface", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services subscribers", "cmd": "request services subscribers", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services url-filter delete gencfg-data", "cmd": "request services url-filter delete gencfg-data", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services url-filter force dns-resolution", "cmd": "request services url-filter force dns-resolution", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services url-filter update url-filter-database file", "cmd": "request services url-filter update url-filter-database file", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services user-identification", "cmd": "request services user-identification", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "request services userauthentication-source arubaidentification authentication-so", "cmd": "request services userauthentication-source arubaidentification authentication-source clearpass user-query", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "request services user-identification authentication-source jims validate", "cmd": "request services user-identification authentication-source jims validate", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services useridentification active-directoryaccess domain-controller", "cmd": "request services useridentification active-directoryaccess domain-controller", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services web-filter delete gencfg-data", "cmd": "request services web-filter delete gencfg-data", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services web-filter force dns-resolution", "cmd": "request services web-filter force dns-resolution", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services web-filter update dns-filter-database", "cmd": "request services web-filter update dns-filter-database", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services web-filter update url-filter-database file", "cmd": "request services web-filter update url-filter-database file", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request services web-filter validate url-filter-file-name", "cmd": "request services web-filter validate url-filter-file-name", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request session member", "cmd": "request session member", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "SNMP", "title": "request snmp utility-mib set instance", "cmd": "request snmp utility-mib set instance", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request support information", "cmd": "request support information", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system application (Junos OS Evolved)", "cmd": "request system application (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system autorecovery state", "cmd": "request system autorecovery state", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system boot console", "cmd": "request system boot console", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system certificate add", "cmd": "request system certificate add", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system commit server pause", "cmd": "request system commit server pause", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system commit server queue cleanup", "cmd": "request system commit server queue cleanup", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system commit server start", "cmd": "request system commit server start", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system configuration database resize", "cmd": "request system configuration database resize", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system configuration rescue delete", "cmd": "request system configuration rescue delete", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system configuration rescue save", "cmd": "request system configuration rescue save", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system convert-jsonconfiguration", "cmd": "request system convert-jsonconfiguration", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system debug-info", "cmd": "request system debug-info", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system disable unifiedservices", "cmd": "request system disable unifiedservices", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system download clear", "cmd": "request system download clear", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system download start", "cmd": "request system download start", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system enable unifiedservices", "cmd": "request system enable unifiedservices", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system filesystem encryption enable", "cmd": "request system filesystem encryption enable", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system filesystem encryption keys delete", "cmd": "request system filesystem encryption keys delete", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system firmware upgrade (Junos OS Evolved)", "cmd": "request system firmware upgrade (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system firmware upgrade optics (Junos OS Evolved)", "cmd": "request system firmware upgrade optics (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system license update", "cmd": "request system license update", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system logout", "cmd": "request system logout", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system partition abort", "cmd": "request system partition abort", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system partition compactflash", "cmd": "request system partition compactflash", "desc": "request - System-level requests" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "request system power-off (SRX Series)", "cmd": "request system power-off (SRX Series)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system reboot (Junos OS Evolved)", "cmd": "request system reboot (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system reboot (Junos OS with Upgraded FreeBSD)", "cmd": "request system reboot (Junos OS with Upgraded FreeBSD)", "desc": "request - System-level requests" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "request system reboot usb (SRX Series)", "cmd": "request system reboot usb (SRX Series)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system recover", "cmd": "request system recover", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system scripts add", "cmd": "request system scripts add", "desc": "request - System-level requests" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "request system scripts add (Chassis Cluster)", "cmd": "request system scripts add (Chassis Cluster)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system scripts convert", "cmd": "request system scripts convert", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system scripts delete", "cmd": "request system scripts delete", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system scripts eventscripts reload", "cmd": "request system scripts eventscripts reload", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system scripts refreshfrom", "cmd": "request system scripts refreshfrom", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system scripts rollback", "cmd": "request system scripts rollback", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system scripts synchronize", "cmd": "request system scripts synchronize", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "DHCP", "title": "request system services dhcp", "cmd": "request system services dhcp", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system snapshot (Junos OS Evolved)", "cmd": "request system snapshot (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system snapshot (Junos OS with FreeBSD Prior to Release 10)", "cmd": "request system snapshot (Junos OS with FreeBSD Prior to Release 10)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system snapshot (Junos OS with Upgraded FreeBSD)", "cmd": "request system snapshot (Junos OS with Upgraded FreeBSD)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system snapshot (Maintenance)", "cmd": "request system snapshot (Maintenance)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software abort inservice-upgrade (ICU)", "cmd": "request system software abort inservice-upgrade (ICU)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software activate (Junos OS Evolved)", "cmd": "request system software activate (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software add (Junos OS Evolved)", "cmd": "request system software add (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software add (Junos OS)", "cmd": "request system software add (Junos OS)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software add (Maintenance)", "cmd": "request system software add (Maintenance)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software add optional://auto-snapshot", "cmd": "request system software add optional://auto-snapshot", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software configuration-backup", "cmd": "request system software configuration-backup", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software delete (Junos OS)", "cmd": "request system software delete (Junos OS)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software deletebackup", "cmd": "request system software deletebackup", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software download", "cmd": "request system software download", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software formatqfabric-backup", "cmd": "request system software formatqfabric-backup", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software inservice-upgrade", "cmd": "request system software inservice-upgrade", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software inservice-upgrade (MX Series 5G Universal Routing Platfo", "cmd": "request system software inservice-upgrade (MX Series 5G Universal Routing Platforms and EX9200 Switches)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software inservice-upgrade (Maintenance)", "cmd": "request system software inservice-upgrade (Maintenance)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software nonstopupgrade (QFabric Systems)", "cmd": "request system software nonstopupgrade (QFabric Systems)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software recoverfrom-restore-point", "cmd": "request system software recoverfrom-restore-point", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software recoverypackage", "cmd": "request system software recoverypackage", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software restorepoint", "cmd": "request system software restorepoint", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software rollback (Junos OS Evolved)", "cmd": "request system software rollback (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software rollback (Junos OS)", "cmd": "request system software rollback (Junos OS)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software stage (Junos OS Evolved)", "cmd": "request system software stage (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software sync", "cmd": "request system software sync", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software systembackup", "cmd": "request system software systembackup", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software validate (Junos OS Evolved)", "cmd": "request system software validate (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software validate (Junos OS)", "cmd": "request system software validate (Junos OS)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software validate in-service-upgrade", "cmd": "request system software validate in-service-upgrade", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software validate on (Junos OS with Upgraded FreeBSD)", "cmd": "request system software validate on (Junos OS with Upgraded FreeBSD)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system software validaterestart (Junos OS Evolved)", "cmd": "request system software validaterestart (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system storage cleanup (Junos OS)", "cmd": "request system storage cleanup (Junos OS)", "desc": "request - System-level requests" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "System", "title": "request system storage cleanup (SRX Series)", "cmd": "request system storage cleanup (SRX Series)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system yang add", "cmd": "request system yang add", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system yang disable", "cmd": "request system yang disable", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system yang enable", "cmd": "request system yang enable", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system yang update", "cmd": "request system yang update", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system yang validate", "cmd": "request system yang validate", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system zeroize", "cmd": "request system zeroize", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system zeroize (Junos OS Evolved)", "cmd": "request system zeroize (Junos OS Evolved)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request system zeroize ztp-option secure", "cmd": "request system zeroize ztp-option secure", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request unified-edge tdf call-trace show", "cmd": "request unified-edge tdf call-trace show", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request unified-edge tdf call-trace start", "cmd": "request unified-edge tdf call-trace start", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request unified-edge tdf call-trace stop", "cmd": "request unified-edge tdf call-trace stop", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request validation policy", "cmd": "request validation policy", "desc": "request - System-level requests" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "request virtual-chassis member-id delete (MX Series Virtual Chassis)", "cmd": "request virtual-chassis member-id delete (MX Series Virtual Chassis)", "desc": "request - System-level requests" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "request virtual-chassis mode", "cmd": "request virtual-chassis mode", "desc": "request - System-level requests" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "request virtual-chassis recycle", "cmd": "request virtual-chassis recycle", "desc": "request - System-level requests" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "request virtual-chassis routingengine master switch", "cmd": "request virtual-chassis routingengine master switch", "desc": "request - System-level requests" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "request virtual-chassis vc-port", "cmd": "request virtual-chassis vc-port", "desc": "request - System-level requests" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "request virtual-chassis vc-port delete (MX Series Virtual Chassis)", "cmd": "request virtual-chassis vc-port delete (MX Series Virtual Chassis)", "desc": "request - System-level requests" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "request virtual-chassis vc-port set (MX Series Virtual Chassis)", "cmd": "request virtual-chassis vc-port set (MX Series Virtual Chassis)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost cleanup", "cmd": "request vmhost cleanup", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost cleanup (NFX Series)", "cmd": "request vmhost cleanup (NFX Series)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost copy vjunos-tojnode", "cmd": "request vmhost copy vjunos-tojnode", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost file-copy", "cmd": "request vmhost file-copy", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost file-copy (NFX Series)", "cmd": "request vmhost file-copy (NFX Series)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost jdm add (InChassis Model)", "cmd": "request vmhost jdm add (InChassis Model)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost jdm delete (InChassis Model)", "cmd": "request vmhost jdm delete (InChassis Model)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost jdm login (InChassis Model)", "cmd": "request vmhost jdm login (InChassis Model)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost jdm start (InChassis Model)", "cmd": "request vmhost jdm start (InChassis Model)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost jdm stop (InChassis Model)", "cmd": "request vmhost jdm stop (InChassis Model)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost local-file-copy", "cmd": "request vmhost local-file-copy", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost mode", "cmd": "request vmhost mode", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost power-off", "cmd": "request vmhost power-off", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost power-on", "cmd": "request vmhost power-on", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost reboot", "cmd": "request vmhost reboot", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost reboot (NFX Series)", "cmd": "request vmhost reboot (NFX Series)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost software add", "cmd": "request vmhost software add", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost software add (NFX Series)", "cmd": "request vmhost software add (NFX Series)", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost software inservice-upgrade", "cmd": "request vmhost software inservice-upgrade", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost storage", "cmd": "request vmhost storage", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request vmhost zeroize", "cmd": "request vmhost zeroize", "desc": "request - System-level requests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "restart", "cmd": "restart", "desc": "restart - Process/daemon management" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "restart (JDM)", "cmd": "restart (JDM)", "desc": "restart - Process/daemon management" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "restart (Junos OS Evolved)", "cmd": "restart (Junos OS Evolved)", "desc": "restart - Process/daemon management" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "restart chassis-control", "cmd": "restart chassis-control", "desc": "restart - Process/daemon management" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor ethernet delaymeasurement", "cmd": "monitor ethernet delaymeasurement", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor ethernet lossmeasurement", "cmd": "monitor ethernet lossmeasurement", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor ethernet synthetic-lossmeasurement", "cmd": "monitor ethernet synthetic-lossmeasurement", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor interface error", "cmd": "monitor interface error", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor label-switched-path", "cmd": "monitor label-switched-path", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor list", "cmd": "monitor list", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor list (JDM)", "cmd": "monitor list (JDM)", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "monitor mpls delay rsvp", "cmd": "monitor mpls delay rsvp", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor pfe traffic interface", "cmd": "monitor pfe traffic interface", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor security flow file", "cmd": "monitor security flow file", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor security flow start", "cmd": "monitor security flow start", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor security flow stop", "cmd": "monitor security flow stop", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor security packet-drop", "cmd": "monitor security packet-drop", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor start", "cmd": "monitor start", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor start (JDM)", "cmd": "monitor start (JDM)", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "monitor stop (JDM)", "cmd": "monitor stop (JDM)", "desc": "monitor - Real-time monitoring" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "test aaa authd-lite user", "cmd": "test aaa authd-lite user", "desc": "test - Diagnostic tests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "test aaa ppp user", "cmd": "test aaa ppp user", "desc": "test - Diagnostic tests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "test access profile", "cmd": "test access profile", "desc": "test - Diagnostic tests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "test access radius-server", "cmd": "test access radius-server", "desc": "test - Diagnostic tests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "test interface restart-autonegotiation", "cmd": "test interface restart-autonegotiation", "desc": "test - Diagnostic tests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "test msdp", "cmd": "test msdp", "desc": "test - Diagnostic tests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "test policy", "cmd": "test policy", "desc": "test - Diagnostic tests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "test security utm anti-spam", "cmd": "test security utm anti-spam", "desc": "test - Diagnostic tests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "test security utm enhanced-webfiltering url-check", "cmd": "test security utm enhanced-webfiltering url-check", "desc": "test - Diagnostic tests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "test security utm web-filtering profile", "cmd": "test security utm web-filtering profile", "desc": "test - Diagnostic tests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "test services l2tp tunnel", "cmd": "test services l2tp tunnel", "desc": "test - Diagnostic tests" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "ping fabric multicast-flow", "cmd": "ping fabric multicast-flow", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "ping mpls l2circuit", "cmd": "ping mpls l2circuit", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "ping mpls l2vpn", "cmd": "ping mpls l2vpn", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "ping mpls l3vpn", "cmd": "ping mpls l3vpn", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "ping mpls ldp", "cmd": "ping mpls ldp", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "ping mpls lsp-end-point", "cmd": "ping mpls lsp-end-point", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "ping mpls segment routing isis", "cmd": "ping mpls segment routing isis", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "ping mpls segment routing static egress-ip", "cmd": "ping mpls segment routing static egress-ip", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "ping mpls segment-routing springte", "cmd": "ping mpls segment-routing springte", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "ping overlay", "cmd": "ping overlay", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "ping srv6", "cmd": "ping srv6", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "ping vpls instance", "cmd": "ping vpls instance", "desc": "ping - Connectivity testing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "traceroute clns", "cmd": "traceroute clns", "desc": "traceroute - Route tracing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "traceroute ethernet", "cmd": "traceroute ethernet", "desc": "traceroute - Route tracing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "traceroute monitor", "cmd": "traceroute monitor", "desc": "traceroute - Route tracing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "traceroute mpls bgp", "cmd": "traceroute mpls bgp", "desc": "traceroute - Route tracing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Routing", "title": "traceroute mpls segment-routing isis", "cmd": "traceroute mpls segment-routing isis", "desc": "traceroute - Route tracing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "OSPF", "title": "traceroute mpls segment-routing ospf", "cmd": "traceroute mpls segment-routing ospf", "desc": "traceroute - Route tracing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "traceroute mpls segment-routing spring-te", "cmd": "traceroute mpls segment-routing spring-te", "desc": "traceroute - Route tracing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "traceroute mpls segment-routing static egress-ip", "cmd": "traceroute mpls segment-routing static egress-ip", "desc": "traceroute - Route tracing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "traceroute overlay", "cmd": "traceroute overlay", "desc": "traceroute - Route tracing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "traceroute srv6", "cmd": "traceroute srv6", "desc": "traceroute - Route tracing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file", "cmd": "file", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file archive", "cmd": "file archive", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file change-owner", "cmd": "file change-owner", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file change-permission", "cmd": "file change-permission", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file checksum sha-256", "cmd": "file checksum sha-256", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file checksum sha1", "cmd": "file checksum sha1", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file compress", "cmd": "file compress", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file copy", "cmd": "file copy", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file delete", "cmd": "file delete", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file link", "cmd": "file link", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file rename", "cmd": "file rename", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file show", "cmd": "file show", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set chassis display message", "cmd": "set chassis display message", "desc": "file - File operations" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "System", "title": "set chassis virtual-chassis", "cmd": "set chassis virtual-chassis", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set cli idle-timeout", "cmd": "set cli idle-timeout", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set cli logical-system", "cmd": "set cli logical-system", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set cli restart-on-upgrade", "cmd": "set cli restart-on-upgrade", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set cli timestamp", "cmd": "set cli timestamp", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set date", "cmd": "set date", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "NTP", "title": "set date ntp", "cmd": "set date ntp", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set services jinsightd subscribe health-monitor", "cmd": "set services jinsightd subscribe health-monitor", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "DELETE (DTCP)", "cmd": "DELETE (DTCP)", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete", "cmd": "delete", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete chassis fpc", "cmd": "delete chassis fpc", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "delete services jinsightd subscribe health-monitor", "cmd": "delete services jinsightd subscribe health-monitor", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "deactivate", "cmd": "deactivate", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "activate", "cmd": "activate", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "load access-security slaacsnooping persistent-file", "cmd": "load access-security slaacsnooping persistent-file", "desc": "file - File operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "annotate", "cmd": "annotate", "desc": "configure - Enter configuration mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "rename", "cmd": "rename", "desc": "configure - Enter configuration mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "insert", "cmd": "insert", "desc": "configure - Enter configuration mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "protect", "cmd": "protect", "desc": "configure - Enter configuration mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "top", "cmd": "top", "desc": "configure - Enter configuration mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "run", "cmd": "run", "desc": "run - Execute op command in config mode" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "wildcard delete", "cmd": "wildcard delete", "desc": "wildcard - Wildcard operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "telnet", "cmd": "telnet", "desc": "wildcard - Wildcard operations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "start shell", "cmd": "start shell", "desc": "start - Start processes" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "help", "cmd": "help", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "DISABLE (DTCP)", "cmd": "DISABLE (DTCP)", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "clear-services-web-filter-dns-feedstatistics-feed-name", "cmd": "clear-services-web-filter-dns-feedstatistics-feed-name", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "replace", "cmd": "replace", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request-chassis-fpc-opticalmodule-amplifier-chain-ila-softreset", "cmd": "request-chassis-fpc-opticalmodule-amplifier-chain-ila-softreset", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request-system-integrity-logretrieval", "cmd": "request-system-integrity-logretrieval", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "request-system-integrityattestation", "cmd": "request-system-integrityattestation", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "show-bgp-diagnostics", "cmd": "show-bgp-diagnostics", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show-system-inventory-hardwarememory", "cmd": "show-system-inventory-hardwarememory", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show-system-inventory-hardwareoptics", "cmd": "show-system-inventory-hardwareoptics", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show-system-inventory-hardwarestorage", "cmd": "show-system-inventory-hardwarestorage", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show-ted-ipv4-prefix", "cmd": "show-ted-ipv4-prefix", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "update", "cmd": "update", "desc": "help - Online help" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "VLAN", "title": "[edit forwarding-options port-mirroring [instance name] family ethernet-switchin", "cmd": "[edit forwarding-options port-mirroring [instance name] family ethernet-switching output]", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit forwarding-options port-mirroring [instance name] family inet output inter", "cmd": "[edit forwarding-options port-mirroring [instance name] family inet output interface name]", "desc": "help - Online help" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit forwarding-options port-mirroring [instance name] family]", "cmd": "[edit forwarding-options port-mirroring [instance name] family]", "desc": "help - Online help" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "action bash", "cmd": "action bash command", "desc": "The action bash command specifies a Bash shell command to be run when an event handler is triggered." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "alias", "cmd": "alias alias_name command_name\nno alias alias_name\ndefault alias alias_name", "desc": "The alias command creates an alias for a CLI command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "bash", "cmd": "bash", "desc": "The bash command starts the Linux Bash shell." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "comment (various configuration modes)", "cmd": "comment comment_text EOF\nno comment\ndefault comment !! comment_text", "desc": "The comment command adds a comment for the active configuration mode to running-config." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "configure (configure terminal)", "cmd": "configure [terminal]", "desc": "The configure command places the switch in the Global Configuration mode to configure features at the system level." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "configure checkpoint", "cmd": "configure checkpoint {restore checkpoint_name | save [checkpoint_name]}", "desc": "The configure checkpoint command saves the running configuration to a checkpoint file." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "configure convert", "cmd": "configure convert new-syntax", "desc": "The configure convert command converts the current configuration syntax to the specified syntax." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "configure network", "cmd": "configure network", "desc": "The configure network command is deprecated." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "copy running-config", "cmd": "copy running-config DESTINATION", "desc": "The current operating configuration of the switch is stored in a virtual file called running-config." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "daemon", "cmd": "daemon daemon_name\nno daemon daemon_name\ndefault daemon daemon_name", "desc": "The daemon command accesses daemon configuration mode for adding or removing external daemons and scripts, which are then managed by ProcMgr." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "delay", "cmd": "delay seconds", "desc": "The delay command specifies the time in seconds the system will delay between a triggering event and the execution of an event handler action." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "dir", "cmd": "dir [SCOPE][FILE TYPE]", "desc": "The dir command displays a list of files on a file system." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "disable", "cmd": "disable [PRIVILEGE_LEVEL]", "desc": "The disable command exchanges the session’s current command mode with the specified privilege level." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "enable", "cmd": "enable [PRIVILEGE_LEVEL]", "desc": "The enable command places the switch in Privileged EXEC mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "event-handler DropCountersHandler", "cmd": "event-handler DropCountersHandler\nno event-handler DropCountersHandler\ndefault event-handler DropCountersHandler", "desc": "The event-handler DropCountersHandler command enables the adverse drop counters monitor with event handlers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "event-handler", "cmd": "event-handler name\nno event-handler name\ndefault event-handler name", "desc": "An event handler executes a Linux Bash shell command in response to a specific system event." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip ftp client source-interface", "cmd": "ip ftp [client] source-interface INTERFACE [vrf vrf_name]\nno ip ftp [client] source-interface\ndefault ip ftp [client] source-interface", "desc": "By default, the FTP (File Transfer Protocol) source IP address is selected by the switch (the IP address of the source interface if one is assigned)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip http client local-interface", "cmd": "ip http client local-interface INTERFACE [vrf vrf_name]\nno ip http client local-interface\ndefault ip http client local-interface", "desc": "The ip http client local-interface command specifies the source IP address for hypertext transfer protocol (HTTP) connections." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip ssh client source-interface", "cmd": "ip ssh [client] source-interface INTERFACE [vrf vrf_name]\nno ip ssh [client] source-interface\ndefault ip ssh [client] source-interface", "desc": "The ip ssh client source-interface command specifies the source IP address for secure shell (SSH) connections." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip tftp client source-interface", "cmd": "ip tftp [client] source-interface INTERFACE [vrf vrf_name]\nno ip tftp [client] source-interface\ndefault ip tftp [client] source-interface", "desc": "The ip tftp client source-interface command specifies the source IP address for Trivial File Transfer Protocol (TFTP) connections." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "platform arad lag mode", "cmd": "platform arad lag mode [1024x16 | 256x64 | 512x32]", "desc": "The platform arad lag mode command allows configuration of LAGs with more than 16 members." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "platform sand fabric mode (7500 and 7500E Series)", "cmd": "platform sand fabric mode [MODE_SETTING]\nno platform sand fabric mode\ndefault platform sand fabric mode", "desc": "The platform sand fabric mode command specifies the fabric mode under which the switch operates after the next system reload." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "platform sand forwarding mode (7500 and 7500E Series)", "cmd": "platform sand forwarding mode [MODE_SETTING]\nno platform sand forwarding mode\ndefault platform sand forwarding mode", "desc": "The platform sand forwarding mode command specifies the forwarding compatibility mode under which the switch operates after the next system reload." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "platform sand lag hardware-only", "cmd": "platform sand lag hardware-only\nno platform sand lag hardware-only\ndefault platform sand lag hardware-only", "desc": "The platform sand lag hardware-only command specifies that all LAGs will use hardware resources including single member LAGs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "platform sand lag mode", "cmd": "platform sand lag mode [2048x8 | 1024x16 | 512x32 | 256x64 | 128x128 |", "desc": "The platform sand lag mode configures two Link Aggregation Groups (LAG) partitions, Partition A and Partition B, to support twice as many available Port Channels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "pwd", "cmd": "pwd", "desc": "The pwd command displays the working directory." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "schedule config", "cmd": "schedule config{max-concurrent-jobs limit | prepend-hostname-logfile}\nno schedule config {max-concurrent-jobs limit | prepend-hostname-logfile}\ndefault schedule config {max-concurrent-jobs limit | prepend-hostname-logfile}", "desc": "The schedule config command sets configuration parameters to the CLI scheduler." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "schedule", "cmd": "schedule schedule_name PERIOD {max-log-files count | timeout timeout_interval}{command cmd | logging\nverbose | loglocation flash:}\nno schedule schedule_name\ndefault schedule schedule_name", "desc": "The schedule command facilitates the periodic execution of a specified CLI command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show (various configuration modes)", "cmd": "show [DATA_TYPE]", "desc": "The show command, when executed within a configuration mode, can display data in running-config for the active configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show event-handler DropCountersHandler", "cmd": "show event-handler DropCountersHandler", "desc": "The show event-handler command displays details of the DropCountersHandler event handler." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show event-handler", "cmd": "show event-handler [handler_name]", "desc": "The show event-handler command displays the contents and activation history of a specified event handler or all event handlers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show module", "cmd": "show module [MODULE_NAME]", "desc": "The show module command displays information that identifies the supervisor, fabric, and linecard modules in a modular switch, including model number, serial number, hardware version number, software version" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform sand compatibility", "cmd": "show platform sand compatibility", "desc": "The show sand platform compatibility command displays the fabric and forwarding modes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show platform sand lag hardware-only", "cmd": "show platform sand lag hardware-only", "desc": "The show platform sand lag hardware-only command displays whether or not LAGs are hardware-only." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show schedule", "cmd": "show schedule {schedule_name | summary}", "desc": "The show schedule command displays logging output on the terminal during the current terminal session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "bytes", "cmd": "bytes", "desc": "ro301_thelp_2018-06-19." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show version", "cmd": "show version [INFO_LEVEL]", "desc": "The show version command displays information that identifies the switch, including its model number, serial number, and system MAC address." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "terminal length", "cmd": "terminal length lines\nno terminal length\ndefault terminal length", "desc": "The terminal length command overrides automatic pagination and sets pagination length for all show commands on a terminal." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "terminal monitor", "cmd": "terminal monitor\nno terminal monitor\ndefault terminal monitor", "desc": "The terminal monitor command enables the display of logging output on the terminal during the current terminal session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "trigger", "cmd": "trigger EVENT", "desc": "The trigger command specifies what event will trigger the event handler." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Boot Loader Aboot", "cmd": "Boot Loader Aboot", "desc": "Aboot is the boot loader for Arista switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "boot-config", "cmd": "boot-config", "desc": "The boot-config file is an ASCII file that Aboot uses to configure console communication settings, locate the EOS flash image, and specify initial network configuration settings." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "boot-config File Structure", "cmd": "boot-config File Structure", "desc": "Each line in the boot-config file specifies a configuration setting and has this format: NAME=VALUE • NAME is the parameter label." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "boot-config Command Line Content", "cmd": "boot-config Command Line Content", "desc": "Aboot configuration commands that boot-config files can contain include: • SWI specifies the location and file name of the EOS image file that Aboot loads when booting, using the same format as the boot command to designate a local or network path." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "running-config", "cmd": "running-config", "desc": "The running-config is a virtual file that contains the system’s operating configuration, formatted as a command sequence." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "startup-config", "cmd": "startup-config", "desc": "The startup-config file is stored in flash memory and contains the configuration the switch loads when booting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Redundancy Supervisor Protocols", "cmd": "Redundancy Supervisor Protocols", "desc": "There are three available supervisor redundancy protocols." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "System Reset", "cmd": "System Reset", "desc": "When a reset condition exists, Aboot can either reset the switch without user intervention or facilitate a manual reset through the Aboot shell." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "CONSOLESPEED", "cmd": "CONSOLESPEED", "desc": "The CONSOLESPEED command in the boot-config file specifies the console baud rate when the switch is booted." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "NET Commands", "cmd": "NET Commands", "desc": "Aboot uses NET commands in the boot-config file during switch booting to configure the network interface used for switch configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "install bios source", "cmd": "install bios source SOURCE [active | standby] [reload | now]", "desc": "install bios source command is used to install an Aboot Update File (AUF) to upgrade Aboot firmware." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "PASSWORD (ABOOT)", "cmd": "PASSWORD = encrypted_string", "desc": "PASSWORD specifies the Aboot password, as described in Accessing the Aboot Shell." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "SWI", "cmd": "SWI", "desc": "SWI specifies the location and file name of the EOS image file that Aboot loads when booting, using the same format as boot-config to designate a local or network path." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "boot console", "cmd": "boot console speed baud_rate", "desc": "The boot console command configures terminal settings for serial devices connecting to the console port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "boot secret", "cmd": "boot secret [ENCRYPT_TYPE] password\nno boot secret\ndefault boot secret", "desc": "The boot secret command creates or edits the Aboot shell password and stores the encrypted string in the PASSWORD command line of the boot-config file." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "boot system", "cmd": "boot system device file_path", "desc": "The boot system command specifies the location of the EOS software image that Aboot loads when the switch boots." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "delete startup-config", "cmd": "delete startup-config [CONFIRMATION]", "desc": "The delete startup-config command erases or deletes the startup-config file." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "protocol", "cmd": "protocol {rpr | simplex | sso}\nno protocol\ndefault protocol", "desc": "The protocol command configures how the supervisors on a modular switch will handle switchover events." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "redundancy", "cmd": "redundancy\nprotocol", "desc": "The redundancy command places the switch in redundancy configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "redundancy manual switchover", "cmd": "redundancy manual switchover", "desc": "The redundancy manual switchover command immediately switches control of the switch to the standby supervisor." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "reload", "cmd": "reload [TARGET] [CONFIRMATION]", "desc": "The reload command power cycles the switch and resets it under Aboot control." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "reload (scheduled)", "cmd": "reload cancel\nno reload\ndefault reload", "desc": "The reload (scheduled) command configures the switch to reset at a specified time or after a specified interval." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "securebootctl", "cmd": "securebootctl secureboot [-enable | -disable | -display]\nsecurebootctl cert [[-add path] -delete | -display]\nsecurebootctl aristacert [-disable | -enable | -display]\nsecurebootctl abootpassword [-disable | -enable | -display]", "desc": "The securebootctl command in the Privileged EXEC Mode manages and displays the status of Secure Boot on Arista switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform bios", "cmd": "show platform bios", "desc": "The show platform bios [history | detail] command displays the BIOS versions on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show redundancy file-replication", "cmd": "show redundancy file-replication", "desc": "The show redundancy file-replication command displays the status and last synchronization date of file replication between the supervisors on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show redundancy status", "cmd": "show redundancy status", "desc": "The show redundancy status command displays the current status (active or standby) and the configured redundancy protocol of both supervisors, and summary information about the latest switchover event." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show redundancy switchover sso", "cmd": "show redundancy switchover sso", "desc": "The show redundancy switchover sso command displays the number of stateful switchovers since the last reload and a log of the events in the latest stateful switchover." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show reload", "cmd": "show reload", "desc": "The show reload command displays the time and reason for any pending reload operation." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show reload cause", "cmd": "show reload cause", "desc": "The show reload cause command displays the reason for the most recent reload operation." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show reload fast-boot", "cmd": "show reload fast-boot", "desc": "The show reload fast-boot command verifies that the switch configuration is valid for Smart System Upgrade (SSU)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "commit timer", "cmd": "commit timer hh:mm:ss", "desc": "The commit timer command can automatically roll back changes performed during a configuration session if you haven't confirmed them within a preset time interval." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "configure replace", "cmd": "configure replace source_file_path:source_file_name [ignore-errors] [md5 md5sum] [skip-checkpoint]", "desc": "The configure replace command replaces the current configuration with a new configuration from the specified source." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "configure session", "cmd": "configure session [session_name] [abort | commit | [description description]]\nno configure session session_name\ndefault configure session", "desc": "The configure session command allows a series of temporary configuration changes and commits to running-config later by issuing the commit command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "idle-timeout (Console Management)", "cmd": "idle-timeout idle_period\nno idle-timeout\ndefault idle-timeout", "desc": "The idle-timeout (Console Management) command configures the idle-timeout period for console connection sessions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management accounts", "cmd": "management accounts", "desc": "The management accounts command enters the Accounts Management Configuration Mode and allows the creation of user accounts on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management api eos-sdk-rpc", "cmd": "management api eos-sdk-rpc\nno management api eos-sdk-rpc\ndefault management api eos-sdk-rpc", "desc": "The management api eos-sdk-rpc command places the switch in EOS SDK RPC API management configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management api external-services", "cmd": "management api external-services\nno management api external-services\ndefault management api external-services", "desc": "The management api external-services command places the switch in External Services API configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management api gnmi", "cmd": "management api gnmi\nno management api gnmi\ndefault management api gnmi", "desc": "The management api gnmi command places the switch in GNMI API Management configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management api gnsi", "cmd": "management api gnsi\nno management api gnsi\ndefault management api gnsi", "desc": "The management api gnsi command places the switch in GNSI API management configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management api gribi", "cmd": "management api gribi\nno management api gribi\ndefault management api gribi", "desc": "The management api gribi command places the switch in gRIBI API Management configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management api http-commands", "cmd": "management api http-commands\nno management api http-commands\ndefault management api http-commands", "desc": "The management api http-commands command places the switch in HTTP Commands API Management Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management api models", "cmd": "management api models\nno management api models\ndefault management api models", "desc": "The management api models command places the switch in Models API Management configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management api netconf", "cmd": "management api netconf\nno management api netconf\ndefault management api netconf", "desc": "The management api netconf command places the switch in Netconf API Management configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management api restconf", "cmd": "management api restconf\nno management api restconf\ndefault management api restconf", "desc": "The management api restconf command places the switch in Restconf API Management configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "management archive", "cmd": "management archive [destination flash:] [quotapct percentage] shutdown", "desc": "The management archive command enters the Archive Management Configuration Mode and allows you to manage log archives and archive space." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management cli", "cmd": "management cli command deprecated log", "desc": "The management cli command places the switch in CLI Management Configuration Mode and allows you to configure command line options." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management client", "cmd": "management client api gnmi [group group_name member server_name] [server", "desc": "The management client command enters the Client Management Configuration Mode and configures remote applications or scripts that utilize the switch powerful eAPI (EOS API) to programmatically send configuration and show commands." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management console", "cmd": "management console\nno management console\ndefault management console", "desc": "The management console command places the switch in Console Management Configuration Mode to adjust the idle-timeout period for console connection sessions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "management data source", "cmd": "management data source [disable] [sensor sensor_name [disabled | ip address\nip_address port port] [traffic-policies [disabled] [field-set [ipv4 prefix", "desc": "The management data source command enters the Data Source Management Configuration Mode and allows defining the rules and actions taken on specific data streams." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management defaults", "cmd": "management defaults secret hash [md5 | scrypt | sha-512 | yescrypt]", "desc": "The management defaults command enters the Defaults Management Configuration Mode and configures storing secrets on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management dmf", "cmd": "managment dmf [disabled] [controller address ip_address1 controller address\nip_address2", "desc": "The management dmf command in the DANZ Monitoring Fabric (DMF) Configuration Mode allows the configuration of up to two DMF controllers on the network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management file-systems", "cmd": "management file-systems nfs [crash: directory_name] [file: directory_name] [flash:", "desc": "The management file-systems command in the File Systems Management Configuration Mode allows the configuration and management of the file system on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "management http-server", "cmd": "management http-server [cors allowed-origin origin server_address | all | *]\nmanagement http-server default-services\nmanagement http-server header csp frame-ancestors uri\nmanagement http-server log-level [alert | crit | debug | emerg | error | info\nmanagement http-server protocol [http [localhost | port port_number]] [https\nmanagement http-server qos dscp dscp_value\nmanagement http-server vrf [default | vrf_name", "desc": "The management http-server command enters the HTTP Management Configuration Mode of the switch to allow Application Programming Interface (API) access to the switch for programmatic commands." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "management ldap group", "cmd": "management ldap [group policy policy_name group group_name role role_name [after |", "desc": "The management ldap command in the Global Configuration mode enters the switch into LDAP Management Configuration Mode and allows the configuration of an LDAP group and server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management ldap server", "cmd": "management ldap server [defaults [authorization group policy policy_name]\npassword password] [ssl-profile profile_name] [timeout seconds]] [host host_name\nport port_number vrf vrf_name]", "desc": "The management ldap server command enters the LDAP Management Configuration Mode and allows the configuration of an LDAP server for authentication on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management nic profiles", "cmd": "management nic profiles profile profile_name [connection [ssl profile", "desc": "The management nic profiles command enters the Network Interface Card (NIC) Profile Configuration Mode and allow configuration of an interface for an internal service client such as ZTP or an internal" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management package", "cmd": "management package repository repo_name [description description] [type description]", "desc": "The management package command in the Package Management Configuration Mode configures a remote source for downloading optional software extension packages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management security auto-certificate", "cmd": "management security auto-certificate [profile profile_name [digest [sha256 |\ninstance instance_name] [renewal seconds seconds]]\nmanagement security auto-certificate [protocol est profile_name [connection\nretry [count num_retries] [interval seconds seconds]] [credentials enroll [secret", "desc": "The management security auto-certificate command enters the Auto-Certificate Security Management Configuration Mode and automates the management and renewal of the digital certificates used by the switch for various secure management services such HTTPS for APIs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management security entropy", "cmd": "management security entropy source [cpu jitter] [hardware exclusive]", "desc": "The management security entropy command manages the source of cryptographic entropy (randomness) and provides high quality randomness for SSH keys, SSL/TLS certificates, and random session identifiers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management security network", "cmd": "management security network client protocol [ftp | http | tftp] disabled", "desc": "The management security network command enters the Security Management Configuration mode and then configures security policies that govern the access and behavior of various management applications on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management security ocsp", "cmd": "management security ocsp profile profile_name [chain certificate requirement\nresponder [all | leaf | none]] [extension nonce request [disabled |", "desc": "The management security ocsp command enters the Security Online Certificate Status Protocol (OCSP) Configuration Mode and quickly checks the revocations status of digital certificates used by management services such as HTTP or LDAP over TLS." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management security password", "cmd": "management security", "desc": "The management security password command enters the Security Management Configuration Mode and configures robust password policies for all local user accounts." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management security session", "cmd": "management security session shared-secret profile profile_name secret secret_name", "desc": "The management security session command enters the Security Management Configuration Mode and configures the session parameters that govern the behavior, timeouts, and security of interactive management sessions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "management security signature-verification", "cmd": "management security signature-verification extension ssl profile profile_name", "desc": "The management security signature-verification command enters the Security Management Configuration Mode and apply a named SSL profile that dictates the policies for verifying the integrity of the system files related to secure TLS/SSL communications." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "management security ssl", "cmd": "management security ssl [monitor expiry time [days | hours] [log interval time\nmanagement security ssl [profile profile_name [certificate cert_name [autocertificate cert_name] [common-name [key key_name] [username regexp regex]]\nip-address exact] [requirement [hostname match subject-alternative-name\nexpiry-date ignore]] [requirement [basic-constraint ca true] [hostname fqdn]]", "desc": "The management security ssl command enters the SSL Security Management Configuration mode to configure and manage the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) parameters for all secure management services on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management ssh", "cmd": "management ssh\nno management ssh\ndefault management ssh", "desc": "The management ssh command places the switch in SSH Management Configuration Mode to adjust SSH session connection parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "management telnet", "cmd": "management telnet\nno management telnet\ndefault management telnet", "desc": "The management telnet command places the switch in Telnet Management Configuration Mode to adjust Telnet session connection parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "protocol http (API Management)", "cmd": "protocol http [TCP_PORT]\nno protocol http\ndefault protocol http", "desc": "The protocol http command enables the hypertext transfer protocol (HTTP) server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "protocol https (API Management)", "cmd": "protocol https [TCP_PORT]\nno protocol https\ndefault protocol https", "desc": "The protocol https command enables the HTTP secure server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "protocol https certificate (API Management)", "cmd": "protocol https certificate\nno protocol https certificate\ndefault protocol https certificate", "desc": "The protocol https certificate command configures the HTTP secure server to request an X." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "reset system storage secure", "cmd": "reset system storage secure", "desc": "Use the reset system storage secure command to trigger the secure erase mechanism." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "shutdown (API Management)", "cmd": "shutdown\nno shutdown\ndefault shutdown", "desc": "The shutdown command disables management over API on the switch in API Management Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "timeout", "cmd": "management [console | ssh | telnet] timeout timeout_period", "desc": "The timeout command in the SSH, Telnet, or Console Management Configuration Mode specifies the maximum length of a management session regardless of activity during the session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "vrf (API Management)", "cmd": "vrf VRF_INSTANCE", "desc": "The vrf command places the switch in the server's VRF configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "default", "cmd": "default", "desc": "Specifying DNS Addresses" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "vrf1", "cmd": "vrf1", "desc": "Specifying DNS Addresses" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "vrf1", "cmd": "ip domain lookup source-interface Vlan5", "desc": "fc00::1 default The switch assigns source IP addresses to outgoing DNS requests." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "System Clock and Time Protocols", "cmd": "System Clock and Time Protocols", "desc": "The switch uses the system clock to time-stamp all events, logs, and system messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "Network Time Protocol (NTP) Overview", "cmd": "Network Time Protocol (NTP) Overview", "desc": "EOS enables Network Time Protocol (NTP) on the switch by default, and time settings from any properly configured NTP server override the manual setting of the system clock." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "System Event Logging", "cmd": "System Event Logging", "desc": "Arista switches log Event Notifications using the Syslog protocol." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "Event Monitor", "cmd": "Event Monitor", "desc": "The Event Monitor writes system event records to local files for access by SQLite database commands." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Description", "cmd": "Description", "desc": "The event monitor receives notifications for important events or changes to the enabled event monitor tables." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "banner login", "cmd": "banner login\nno banner login\ndefault banner login", "desc": "The banner login command configures a message that the switch displays before login and password prompts." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "banner motd", "cmd": "banner motd\nno banner motd\ndefault banner motd", "desc": "The banner motd command configures a message of the day (motd) that the switch displays after a user logs in." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "clear ptp interface counters", "cmd": "clear ptp interface [INTERFACE_NAME] counters", "desc": "The clear ptp interface counters command resets the Precision Time Protocol (PTP) packet counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "clock set", "cmd": "clock set hh:mm:ss date", "desc": "The clock set command sets the system clock time and date." }, { "os": "eos", "role": "firewall", "vendor": "Arista", "cat": "NTP", "title": "clock timezone", "cmd": "clock timezone zone_name\nno clock timezone\ndefault clock timezone", "desc": "The clock timezone command specifies the UTC offset that converts system time to local time." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "dns domain", "cmd": "dns domain string\nno dns domain\ndefault dns domain", "desc": "The dns domain command configures the switchs domain name." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "email", "cmd": "email", "desc": "The email command places the switch in email client configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "event-monitor backup max-size", "cmd": "event-monitor backup max-size file_quantity\nno event-monitor backup max-size\ndefault event-monitor backup max-size", "desc": "The event-monitor backup max-size command specifies the quantity of event monitor backup files the switch maintains." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "event-monitor backup path", "cmd": "event-monitor backup path URL_FILE\nno event-monitor backup path\ndefault event-monitor backup path", "desc": "The event-monitor backup path command enables the storage of the event monitor buffer to switch files and specifies the path/name of these files." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "event-monitor buffer max-size", "cmd": "event-monitor buffer max-size buffer_size\nno event-monitor buffer max-size\ndefault event-monitor buffer max-size", "desc": "The event-monitor buffer max-size command specifies the size of the event monitor buffer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "event-monitor clear", "cmd": "event-monitor clear", "desc": "The event-monitor clear command removes the contents of the event monitor buffer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "event-monitor sync", "cmd": "event-monitor sync", "desc": "The event-monitor buffer sync command combines the event monitor buffer and all backup logs and synchronizes them into a single SQLite file, which is stored at /var/log/eventMon." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "event-monitor", "cmd": "event-monitor LOG_TYPE\nno event-monitor LOG_TYPE\ndefault event-monitor LOG_TYPE", "desc": "The event-monitor command enables the event monitor and specifies the types of events that are logged." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "hostname", "cmd": "hostname string\nno hostname\ndefault hostname", "desc": "The hostname command assigns a text string as the switch's host name." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip domain lookup", "cmd": "ip domain lookup [VRF_INSTANCE] source-interface INTF_NAME\nno ip domain lookup [VRF_INSTANCE] source-interface\ndefault ip domain lookup [VRF_INSTANCE] source-interface", "desc": "The ip domain lookup command specifies the source interface for all DNS requests sent from the specified VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip domain-list", "cmd": "ip domain-list [IP_DOMAIN_NAME]\nno ip domain-list [IP_DOMAIN_NAME]\ndefault ip domain-list [IP_DOMAIN_NAME]", "desc": "The ip domain-list command specifies a domain name to add to the IP domain list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip host", "cmd": "ip host hostname hostadd_1 [hostadd_2] ...[hostadd_X]\nno ip host [hostname] [hostadd_1 [hostadd_2] [hostadd_X]\ndefault ip host [hostname] [hostadd_1 [hostadd_2] [hostadd_X]", "desc": "The ip host command associates a hostname to an IPv4 address." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip name-server", "cmd": "ip name-server vrf [vrf_instance] [server_ip_address] [priority priority\nno ip name-server vrf [vrf_instance] [server_ip_address] [priority priority\ndefault ip name-server vrf [vrf_instance] [server_ip_address] [priority priority", "desc": "The ip name-server command adds name server addresses to running_config." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ipv6 host", "cmd": "ipv6 host hostname hostadd1 [hostadd2] ...[hostaddX]\nno ipv6 host [hostname] [hostadd1 [hostadd2] [hostaddX]\ndefault ipv6 host [hostname] [hostadd1 [hostadd2] [hostaddX]", "desc": "The ipv6 host command associates a hostname to an IPv6 address." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging buffered", "cmd": "logging buffered [alerts | critical | debugging | emergencies | informational\nno ->\nlogging buffered [alerts | critical | debugging | emergencies | informational", "desc": "The logging buffered command in the Global Configuration Mode configures the system logging buffer on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging console", "cmd": "logging console [alerts | critical | debugging | emergencies | informational\nno | default logging console [alerts | critical | debugging | emergencies |\ninformational | notifications | warnings]", "desc": "The logging console command in Global Configuration Mode controls which system log events display directly on the switch physical console port or on an administrator's remote terminal session such as SSH or" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging event", "cmd": "logging event [congestion-drops interval seconds] [link-status global] [login\ndiscards [global | interval seconds]>", "desc": "The logging event command in the Global Configuration Mode configures specify logging events not included in system logging on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging facility", "cmd": "logging facility source_name facility_code", "desc": "The logging facility command in the Global Configuration Mode categorizes the source of a system log event using a facility code from 0 to 23." }, { "os": "eos", "role": "firewall", "vendor": "Arista", "cat": "Logging", "title": "logging format", "cmd": "logging format [hostname [fqdn |ipv4]] [prefix prefix [rfc5424] [sequencenumbers] [timestamp high-resolution [traditional timezone| year] ]", "desc": "The logging format command in the Global Configuration Mode to format log messages on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging group", "cmd": "logging group server group_name\nno logging group server\ndefault logging group server", "desc": "The logging group command creates a Logging Group name and enters the Logging Group Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging group host", "cmd": "logging [vrf vrf_name] [host host_name] port port\nno logging [vrf | host]\ndefault logging [vrf | host]", "desc": "The logging group host command configures a Logging Group host and enters the Logging Group Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging group probe", "cmd": "probe [interval seconds [threshold success count]\nno probe\ndefault probe", "desc": "The logging group probe command in the Logging Group Configuration Mode configures the number of ICMP probes sent to the syslog server to determine the server status." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging host", "cmd": "logging host syslog_name [add port_number protocol [tcp | tls | udp]] [protocol", "desc": "The logging host command in Global Configuration Mode configures remote syslog server IP addresses and parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging level", "cmd": "logging level facility [all | default] [alerts | critical | debugging |\nemergencies | informational | notifications | warnings | 0_7]", "desc": "The logging level command in the Global Configuration Mode configures the level of logging severity at the feature level to add to the syslog." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "logging local-interface", "cmd": "logging local-interface [Ethernet port_number | Loopback inf_number | Management\nport_number | Port Channel lag sub_inf | Tunnel inf_number | VLAN inf_number]", "desc": "The logging local-interface command in the Global Configuration Mode configures an IP address of an interface as a source IP of log messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging message", "cmd": "logging message facility_mnenonic severity [alerts | critical | debugging |\nemergencies | informational | notifications | warnings] 0_7", "desc": "The logging message command in the Global Configuration Mode configures the second half of the crucial identifier used within a system log message to categorize the source and event type." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging monitor", "cmd": "logging monitor [alerts | critical | debugging | emergencies | informational\ninformational | notifications | warnings] 0_7", "desc": "The logging monitor command in Global Configuration Mode controls the display of system log events on a switch, specifically for remote terminal sessions such as SSH or Telnet." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging persistent", "cmd": "logging persistent logging file size\nno logging persistent logging file size", "desc": "The logging persistent command logs the files stored on the flash disk." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging policy", "cmd": "logging policy match [invert-result] match-list list_name discard", "desc": "The logging policy command in the Global Configuration Mode creates a set of rules and guidelines that dictate what, when, where, and how the system log handles events." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging qos", "cmd": "logging qos dscp dscp_value", "desc": "The logging qos command in Global Configuration Mode describes how the Quality of Service (QoS) log events apply to the system log and manage the traffic policy and internal buffers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging relogging-interval", "cmd": "logging relogging-interval minutes", "desc": "The logging relogging-interval command in the Global Configuration Mode configures the interval between relogging critical log messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging repeat-messages", "cmd": "logging repeat-messages\nno logging repeat-messages\ndefault logging repeat-messages", "desc": "The logging repeat-messages command configures repetition of syslog messages instead of summarizing the count of repeats." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "logging source-interface", "cmd": "logging source-interface [Ethernet port_number | Loopback inf_number | Management\nport_number | Port Channel lag sub_inf | Tunnel inf_number | VLAN inf_number]", "desc": "The logging source-interface command in Global Configuration Mode configures an interface as the source IP of log messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging synchronous", "cmd": "logging synchronous level [alerts | critical | debugging | emergencies |\ninformational | notifications | warnings] 0_7", "desc": "The logging synchronous command in Global Configuration Mode ensures that system log messages do not disrupt or interfere with command line input." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging trap", "cmd": "logging trap\ninformational | notifications | warnings] 0_7", "desc": "The logging trap command in Global Configuration Mode controls the minimum severity level of system log events eligible to forward to a remote syslog server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging vrf host", "cmd": "logging vrf vrf_name host ip_address [add port_number protocol [tcp | tls | udp]]\nno logging vrf vrf_name\ndefault logging vrf vrf_name", "desc": "The logging vrf command in the Global Configuration Mode ensures that syslog messages use a specific, non-default Virtual Routing and Forwarding (VRF) instance when sent to a remote syslog servers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging vrf local-interface", "cmd": "logging vrf vrf_name local-interface [Ethernet port_number | Loopback inf_number", "desc": "The logging vrf local-interface command in the Global Configuration Mode associates a local interface with a VRF where the event originated." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "logging vrf source-interface", "cmd": "logging vrf vrf_name source-interface [Ethernet port_number | Loopback inf_number", "desc": "The logging vrf local-interface command in the Global Configuration Mode associates a source interface, usually a Loopback interface, with a VRF to provide a consistent and correctly isolated source IP" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "no event-monitor", "cmd": "no event-monitor [PARAMETER]\ndefault event-monitor [PARAMETER]", "desc": "The no event-monitor and default event-monitor commands remove the specified eventmonitor configuration statements from running-config, returning the switch to the specified default state." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ntp authenticate", "cmd": "ntp authenticate\nno ntp authenticate\ndefault ntp authenticate", "desc": "The ntp authenticate command enables the authentication of incoming NTP packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ntp authentication-key", "cmd": "ntp authentication-keykey_id ENCRYPT_TYPE password_text\nno ntp authentication-key key_id\ndefault ntp authentication-key key_id", "desc": "The ntp authentication-key command creates an authentication key for use in authenticating incoming NTP packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ntp local-interface", "cmd": "ntp local-interface [VRF_INSTANCE] INT_PORT\nno ntp local-interface\ndefault ntp local-interface", "desc": "The ntp local-interface command configures an interface as the local NTP source." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ntp serve all", "cmd": "ntp serve all\nno ntp serve all\ndefault ntp serve all", "desc": "The ntp serve all command configures the switch to act as an NTP server by accepting incoming NTP requests." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ntp serve", "cmd": "ntp serve\nno ntp serve\ndefault ntp serve", "desc": "The ntp serve command configures the command mode interface to accept incoming NTP requests regardless of the global setting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ntp server", "cmd": "ntp server [ vrfvrf_instance | host_name] refresh [version ntp_version] [source-address\nno ntp server [vrf_instance] host_name\ndefault ntp server [vrf_instance] host_name", "desc": "The ntp server command adds a Network Time Protocol (NTP) server to the running-config." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ntp trusted-key", "cmd": "ntp trusted-key key_list\nno ntp trusted-key\ndefault ntp trusted-key", "desc": "The ntp trusted-key command specifies which authentication keys will be trusted for authentication of NTP packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "power enable module", "cmd": "power enable module {fabric|linecard|supervisor|switchcard} module_number\nno power enable module {fabric|linecard|supervisor|switchcard} module_number\ndefault power enable module {fabric|linecard|supervisor|switchcard} module_number", "desc": "The power enable module command powers up the specified module." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "prompt", "cmd": "prompt p_string\nno prompt\ndefault prompt", "desc": "The prompt command specifies the contents of the CLI prompt." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show banner", "cmd": "show banner BANNER_TYPE [login | motd]", "desc": "The show banner command displays the specified banner." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show event-monitor arp", "cmd": "show event-monitor arp [GROUP] [MESSAGES] [INTERFACE] [IP] [MAC] [TIME] [VRF]", "desc": "The show event-monitor arp command performs an SQL-style query on the event monitor database and displays ARP table events as specified by command parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show event-monitor igmpsnooping", "cmd": "show event-monitor igmpsnooping [GROUP] [MESSAGES] [MAC] [INTERFACE] [VLAN] [TIME]", "desc": "The show event-monitor igmpsnooping command performs an SQL-style query on the eventmonitor database, using the statement specified in the command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show event-monitor mac", "cmd": "show event-monitor mac [GROUP] [MESSAGES] [INTERFACE] [MAC] [TIME]", "desc": "The show event-monitor mac command performs an SQL-style query on the event monitor database and displays MAC address table events as specified by command parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show event-monitor mroute", "cmd": "show event-monitor mroute [GROUP] [MESSAGES] [IP] [INTERFACE] [SRC_IP] [TIME]", "desc": "The show event-monitor mroute command performs an SQL-style query on the event-monitor database, using the statement specified in the command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show event-monitor neighbor", "cmd": "show event-monitor neighbor [GROUP][MESSAGES][INTERFACE][IP6][MAC][TIME][VRF]", "desc": "The show event-monitor neighbor command performs an SQL-style query on the event monitor database and displays neighbor table events as specified by command parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show event-monitor nexthop-group backup-activation", "cmd": "show event-monitor nexthop-group backup-activation", "desc": "The show event-monitor nexthop-group backup-activation command displays Nexthop Group backup activation events produced by forwarding agents." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show event-monitor route6", "cmd": "show event-monitor route6 [GROUP][MESSAGES][IP6][TIME]", "desc": "The show event-monitor route6 command performs an SQL-style query on the event monitor database and displays routing6 table events as specified by command parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show event-monitor route", "cmd": "show event-monitor route [GROUP][MESSAGES][IP][TIME]", "desc": "The show event-monitor route command performs an SQL-style query on the event monitor database and displays routing table events as specified by command parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show event-monitor sqlite", "cmd": "show event-monitor sqlite statement", "desc": "The show event-monitor sqlite command performs an SQL-style query on the event monitor database, using the statement specified in the command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show event-monitor stpunstable", "cmd": "show event-monitor stpunstable [MESSAGES][TIME]", "desc": "The show event-monitor stpunstable command performs an SQL-style query on the event-monitor database, using the statement specified in the command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show hostname", "cmd": "show hostname", "desc": "The show hostname command displays the hostname and the Fully Qualified Domain Name (FQDN) of the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show hosts", "cmd": "show hosts", "desc": "The show hosts command displays the default domain name, name lookup service style, a list of name server hosts, and the static hostname-IP address maps." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip domain-name", "cmd": "show ip domain-name", "desc": "The show ip domain-name command displays the switchs IP domain name that is configured with the ip domain name command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip name-server", "cmd": "show ip name-server", "desc": "The show ip name-server command displays the ip addresses of name-servers in running-config." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "kindablue", "cmd": "kindablue", "desc": "1 switch>" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "show local-clock time-properties", "cmd": "show local-clock time-properties", "desc": "The show local-clock time-properties command displays the Precision Time Protocol (PTP) clock properties." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "show logging", "cmd": "show logging", "desc": "The show logging command displays information about the current system logging configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "show logging group", "cmd": "show logging group server group_name", "desc": "The show logging group command displays the status of the syslog servers, and indicates if the server acts as the primary or the standby server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "show ntp associations", "cmd": "show ntp associations\nhash of the IPv6 address.", "desc": "The show ntp associations command displays the status of connections to NTP servers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "l1 source", "cmd": "l1 source [interface | mac | none]", "desc": "The l1 source command configures the source for patching Layer 1 traffic between various front panel interfaces and Switch Application (SwitchApp) ports in the Ethernet Interface configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "show l1 destination", "cmd": "show l1 destination [interface]", "desc": "The show l1 destination command displays the list of all destinations for all interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show l1 matrix", "cmd": "show l1 matrix [all | interface | detail | physical]", "desc": "The show l1 matrix command displays the matrix representation of Layer 1 paths for available interfaces in the privileged EXEC mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show l1 path", "cmd": "show l1 path [interface]", "desc": "The show l1 path command displays the source and destination paths for all interfaces in the system." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show l1 source", "cmd": "show l1 source [interface | capabilities]", "desc": "The show l1 source command displays the list of all source interfaces to connect for specific interfaces such as Ethernet ports, switch, FPGA ports, or CPU ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show l1 source capabilities", "cmd": "show l1 source capabilities", "desc": "The show l1 source capabilities command displays the list of all interfaces available to connect in the crosspoint and the possible source ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "seconds", "cmd": "seconds", "desc": "300 seconds 30 seconds Ethernet2 4::1 Sync" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp announce interval", "cmd": "ptp announce interval log_interval\nno ptp announce interval\ndefault ptp announce interval", "desc": "The ptp announce interval command configures the interval at which the configuration mode interface sends PTP announce messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp announce timeout", "cmd": "ptp announce timeout multiplier\nno ptp announce timeout\ndefault ptp announce timeout", "desc": "The ptp announce timeout sets the timeout multiplier for the configuration-mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp delay-mechanism", "cmd": "ptp delay-mechanism mech_type\nno ptp delay-mechanism\ndefault ptp delay-mechanism", "desc": "The ptp delay-mechanism command configures the delay mechanism in boundary clock mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp delay-req interval", "cmd": "ptp delay-req interval log_interval\nno ptp delay-req interval\ndefault ptp delay-req interval", "desc": "The ptp delay-req interval command specifies the time in log seconds recommended to the slave devices to send delay request messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp domain", "cmd": "ptp domain domain_number\nno ptp domain\ndefault ptp domain", "desc": "The ptp domain command sets the domain number to use for the clock." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp enable", "cmd": "ptp enable\nno ptp enable\ndefault ptp enable", "desc": "The ptp enable command enables PTP on the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp forward-v1", "cmd": "ptp forward-v1\nno ptp forward-v1\ndefault ptp forward-v1", "desc": "The ptp forward-v1 command configures the switch to forward Precision Time Protocol version 1 packets as regular multicast traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp grandmasters", "cmd": "ptp grandmasters clock-identity accepted address_format\nno ptp grandmasters", "desc": "The ptp grandmasters command in the PTP Configuration Mode allows the configuration of a list of grandmaster clocks for PTP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp hold-ptp-time", "cmd": "ptp hold-ptp-time offset\nno ptp hold-ptp-time\ndefault ptp hold-ptp-time", "desc": "The ptp hold-ptp-time command configures the PTP offset hold time in seconds." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp local-priority", "cmd": "ptp local-priority PRIORITY_NUM", "desc": "The ptp local-priority command configures the local priority of the clock and interfaces to control the topology." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp mode", "cmd": "ptp mode mode_name\nno ptp mode\ndefault ptp mode", "desc": "The ptp mode command configures the Precision Time Protocol (PTP) packet forwarding mode for the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "ptp monitor threshold mean-path-delay", "cmd": "ptp monitor threshold mean-path-delay threshold\nno ptp monitor threshold mean-path-delay\ndefault ptp monitor threshold mean-path-delay", "desc": "Mean path delay is the mean time in nanoseconds that PTP packets take to travel between PTP master and slave." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "ptp monitor threshold offset-from-master", "cmd": "ptp monitor threshold offset-from-master threshold\nno ptp monitor threshold offset-from-master\ndefault ptp monitor threshold offset-from-master", "desc": "PTP offset is the difference in nanoseconds between master and slave time." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "ptp monitor threshold skew", "cmd": "ptp monitor threshold skew threshold\nno ptp monitor threshold skew\ndefault ptp monitor threshold skew", "desc": "PTP skew is the clock frequency difference between master and slave." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "ptp monitor", "cmd": "ptp monitor\nno ptp monitor", "desc": "The ptp monitor command enables and disables PTP monitoring on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp pdelay-neighbor-threshold", "cmd": "ptp pdelay-neighbor-threshold link_prop\nno ptp pdelay-neighbor-threshold\ndefault ptp pdelay-neighbor-threshold", "desc": "The ptp pdelay-neighbor-threshold command configures the propagation delay threshold above which the switch will consider the neighbor connected to this port to be incapable of participating in generalized Precision Time Protocol (gPTP)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp pdelay-req interval", "cmd": "ptp pdelay-req interval log_interval\nno ptp pdelay-req interval\ndefault ptp pdelay-req interval", "desc": "The ptp pdelay-req interval command configures the interval between Precision Time Protocol peer delay-request messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp priority1", "cmd": "ptp priority1 priority_rate\nno ptp priority1\ndefault ptp priority1", "desc": "The ptp priority1 command configures the priority 1 value for advertising the switchs PTP clock." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp priority2", "cmd": "ptp priority2 priority_rate\nno ptp priority2\ndefault ptp priority2", "desc": "The ptp priority2 command sets the priority 2 value for the clock." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "ptp role", "cmd": "ptp role [dynamic | master]\nno ptp role\ndefault ptp role", "desc": "The ptp role command configures a port to operate either in the master mode or the dynamic mode when it is executed in the interface configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp source", "cmd": "ptp source ip {ip|ipv6} ip_addr\nno ptp source ip\ndefault ptp source ip", "desc": "The ptp source command configures the source IP address for all PTP packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp sync timeout", "cmd": "ptp sync timeout interval_multiplier\nno ptp sync timeout\ndefault ptp sync timeout", "desc": "A PTP synchronization timeout occurs if a sync message is not received for a specified period of time, calculated as a multiple of the PTP sync-message interval." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp sync-message interval", "cmd": "ptp sync-message interval log_interval\nno ptp sync-message interval\ndefault ptp sync-message interval", "desc": "The ptp sync-message interval command configures the time for sending synchronization messages by specifying its log2 value." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp transport", "cmd": "ptp transport transport_type\nno ptp transport\ndefault ptp transport", "desc": "The ptp transport command configures the PTP transport type for a specific interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp ttl", "cmd": "ptp ttl hop_count\nno ptp ttl\ndefault ptp ttl", "desc": "The ptp ttl command configures the Time To Live (TTL) value of the PTP packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "ptp unicast-negotiation", "cmd": "ptp unicast-negotiation\nptp unicast-negotiation remote-grantee", "desc": "The ptp unicast-negotiation command configures the master slave profiles for PTP devices." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "show ptp", "cmd": "show ptp", "desc": "The show ptp command displays summary Precision Time Protocol (PTP) information and PTP status of switch ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "show ptp foreign-master-record", "cmd": "show ptp foreign-master-record", "desc": "The show ptp foreign-master-record command displays information about foreign masters (PTP sources not designated as the switch's master from which the switch has received sync packets)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "show ptp interface counters", "cmd": "show ptp [interface_name] counters", "desc": "The show ptp interface counters command displays PTP interface counters for all interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "show ptp interface", "cmd": "show ptp [interface_name][status_filter]", "desc": "The show ptp interface command displays PTP information for all the interfaces on the device." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "show ptp local-clock", "cmd": "show ptp local-clock", "desc": "The show ptp local-clock command displays the Precision Time Protocol (PTP) clock information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "show ptp masters", "cmd": "show ptp masters", "desc": "The show ptp masters command displays information about the switch's PTP master and grand master clocks." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show ptp monitor", "cmd": "show ptp monitor", "desc": "The show ptp monitor command to displays the list of up to 100 recorded entries of offset from master, mean path delay and skew values, along with current PTP mode, whether or not the feature is enabled," }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "show ptp source ip", "cmd": "show ptp source ip", "desc": "The show ptp source ip command displays the PTP source IP for the device." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "show ptp unicast-negotiation", "cmd": "show ptp unicast-negotiation profile\nshow ptp unicast-negotiation [DETAILS]", "desc": "The show ptp unicast-negotiation command displays PTP unicast negotiation information for the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Environment Control Introduction", "cmd": "Environment Control Introduction", "desc": "Arista switching platforms are designed to work reliably in common data center environments." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Environment Control Overview", "cmd": "Environment Control Overview", "desc": "This section contains the following topics: • Temperature • Fans • Power" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Power", "cmd": "Power", "desc": "Arista switches contain power supplies that provide power to internal components." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Power Status", "cmd": "show environment power", "desc": "The show environment power command displays the status of the power supplies." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "System Status", "cmd": "show system environment all", "desc": "The show system environment all command lists the temperature, cooling, fan, and power supply information the individual show environment commands display, as described in Temperature Status, Fans, and Power." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Environment Commands", "cmd": "Environment Commands", "desc": "Environment Control Configuration Commands • environment fan-speed • environment insufficient-fans action • environment overheat action • locator-led Environment Display Commands • show environment power" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "environment fan-speed", "cmd": "environment fan-speed ACTION\nno environment fan-speed\ndefault environment fan-speed", "desc": "The environment fan-speed command determines how to control the speed of the switch fans." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "environment insufficient-fans action", "cmd": "environment insufficient-fans action REMEDY\nno environment insufficient-fans action\ndefault environment insufficient-fans action", "desc": "The environment insufficient-fans command controls the switch response to the insufficient fan condition." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "environment overheat action", "cmd": "environment overheat action REMEDY\nno environment overheat action\ndefault environment overheat action", "desc": "The environment overheat command controls the switch's response to an overheat condition." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "locator-led", "cmd": "locator-led {fantray tray_num | interface interface | module module_num | powersupply supply_num}\nno locator-led {fantray tray_num | interface interface | module module_num | powersupply supply_num}", "desc": "When a component requires service, the locator-led command activates a locator to assist a technician in finding the component." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show environment power", "cmd": "show environment power [INFO_LEVEL]", "desc": "The show environment power command displays the status of all power supplies in the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show environment temperature", "cmd": "show environment temperature [MODULE_NAME] [INFO_LEVEL]", "desc": "The show environment temperature command displays the operating temperature of all sensors on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show locator-led", "cmd": "show locator-led", "desc": "The show locator-led command displays the status of locator LEDs enabled on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show system environment cooling", "cmd": "show system environment cooling [INFO_LEVEL]", "desc": "The show system environment cooling command displays fan status, air flow direction, and ambient temperature on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show system environment power budget", "cmd": "show system environment power budget", "desc": "The show system environment power budget command displays the configured power budget for PoE switches and a table to show the current consumption." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Reload", "cmd": "Reload", "desc": "After updating the boot-config file, reset the switch to activate the new image." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Install the New EOS Image", "cmd": "Install the New EOS Image", "desc": "After the EOS image has been copied to the primary supervisor's flash drive, use the install command to update the boot-config, copy the new image to the secondary supervisor, and reload both supervisors." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "install", "cmd": "install source source_path [destination destination_path][now][reload]", "desc": "The install command copies the specified EOS image onto the switch if the source is external, configures the boot-config file to point to the specified EOS image, copies the image to the standby supervisor on dualsupervisor switches, and optionally reloads the switch to run the n" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "reload fast-boot", "cmd": "reload fast-boot\nalso recommends that an additional 240MB be available to store diagnostic information.", "desc": "Smart System Upgrade (SSU) allows critical switches to be upgraded with minimal downtime and packet loss by optimizing the reload procedure and leveraging protocols capable of graceful restart." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "reload hitless", "cmd": "reload hitless", "desc": "The reload hitless command is a legacy command now identical to the reload fast-boot command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "AAA Configuration", "cmd": "AAA Configuration", "desc": "This section describes Authentication, Authorization, and Accounting (AAA), and contains these topics: • Authentication, Authorization, and Accounting Overview • Configuring the Security Services • Server Groups" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "RADIUS", "cmd": "radius-server host RAD-1 key rp31E2v", "desc": "Remote Authentication Dial-In User Service (RADIUS) consists of a networking protocol that provides centralized AAA services for computers connecting to a network and then using network resources." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "AAA with LDAP", "cmd": "AAA with LDAP", "desc": "The switches support AAA with the LDAP protocol for authentication and authorization." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "Default Roles", "cmd": "aaa authorization policy local default-role sysuser", "desc": "Users that are not explicitly assigned a role are assigned the default role." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "Radius Servers", "cmd": "aaa authentication login default group radius", "desc": "A role can be assigned to a remote user authenticated through a RADIUS server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "AAA and X.509 Authentication", "cmd": "AAA and X.509 Authentication", "desc": "Configure AAA to support X." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "AAA Time-based Lockout", "cmd": "AAA Time-based Lockout", "desc": "AAA time-based lockout enables managing remote user unsuccessful login attempts for a specified period." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "AAA Accounting for OpenConfig Remote Procedure Call (RPC) Messages Overview", "cmd": "AAA Accounting for OpenConfig Remote Procedure Call (RPC) Messages Overview", "desc": "OpenConfig allows network engineers to collaboratively develop programming interfaces and tools to manage networks dynamically and in a vendor-neutral manner." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "AAA Commands", "cmd": "AAA Commands", "desc": "Local Security File Commands • aaa root • enable password • show privilege • show users • show users accounts • username • username ssh-key Accounting, Authentication, and Authorization Commands • aaa accounting" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa accounting dot1x", "cmd": "aaa accounting dot1x default [METHOD_1][METHOD_2][METHOD_N]\nno aaa accounting dot1x default\ndefault aaa accounting dot1x default", "desc": "The aaa accounting dot1x command enables the accounting of requested 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa accounting system", "cmd": "aaa accounting system default [METHOD_1][METHOD_2] ... [METHOD_N]\nno aaa accounting system default\ndefault aaa accounting system default", "desc": "The aaa accounting system command performs accounting for all system-level events." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa accounting", "cmd": "aaa accounting TYPE CONNECTION MODE [METHOD_1][METHOD_2] ... [METHOD_N]\nno aaa accounting TYPE CONNECTION\ndefault aaa accounting TYPE CONNECTION", "desc": "The aaa accounting command configures accounting method lists for a specified authorization type." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa authentication dot1x", "cmd": "aaa authentication dot1x default group {group_name | radius}\nno aaa authentication dot1x default\ndefault aaa authentication dot1x", "desc": "The aaa authentication dot1x command configures the default authentication list of requested 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa authentication enable", "cmd": "aaa authentication enable [console | default] METHOD_1 [METHOD_2] ... [METHOD_N]\nno aaa authentication enable [console | default]\ndefault aaa authentication enable [console | default]", "desc": "The aaa authentication enable command configures the service list that the switch references to authorize access to Privileged EXEC command mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa authentication login", "cmd": "aaa authentication login CONNECTION SERVICE_1 [SERVICE_2] ... [SERVICE_N]\nno aaa authentication login CONNECTION\ndefault aaa authentication login CONNECTION", "desc": "The aaa authentication login command configures service lists the switch references to authenticate usernames." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa authentication policy local allow-nopassword-remote-login", "cmd": "aaa authentication policy local allow-nopassword-remote-login\nno aaa authentication policy local allow-nopassword-remote-login\ndefault aaa authentication policy local allow-nopassword-remote-login", "desc": "The aaa authentication policy local allow-nopassword-remote-login command permits usernames without passwords to log in from any port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa authentication policy lockout failure", "cmd": "aaa authentication policy lockout failure failure_count duration duration_time {window\nno aaa authentication policy lockout failure\ndefault aaa authentication policy lockout failure", "desc": "The aaa authentication policy lockout failure command configures the switch to block the remote user from access after a specified number of unsuccessful login attempts within a lockout period." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa authentication policy log", "cmd": "aaa authentication policy {on-failure | on-success} log\nno aaa authentication policy {on-failure | on-success} log\ndefault aaa authentication policy {on-failure | on-success} log", "desc": "The aaa authentication policy log command configures the switch to generate syslog messages for login authentication success or failure events." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa authorization commands", "cmd": "aaa authorization commands PRIV default SERVICE_1[SERVICE_2] ... [SERVICE_N]\nno aaa authorization commands PRIV default\ndefault aaa authorization commands PRIV default", "desc": "The aaa authorization commands command configures the service list that authorizes CLI command access." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa authorization config-commands", "cmd": "aaa authorization config-commands\nno aaa authorization config-commands\ndefault aaa authorization config-commands", "desc": "The aaa authorization config-commands command enables authorization of commands in any configuration mode, such as Global Configuration and all interface configuration modes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa authorization exec", "cmd": "aaa authorization exec default METHOD_1 [METHOD_2] ... [METHOD_N]\nno aaa authorization exec default\ndefault aaa authorization exec default", "desc": "The aaa authorization exec command configures the service list that the switch references to authorize access to open an EOS CLI shell." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa authorization policy local default-role", "cmd": "aaa authorization policy local default-role role_name\nno aaa authorization policy local default-role\ndefault aaa authorization policy local default-role", "desc": "The aaa authorization policy local command specifies the name of the default role." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa authorization serial-console", "cmd": "aaa authorization serial-console\nno aaa authorization serial-console\ndefault aaa authorization serial-console", "desc": "The aaa authorization serial-console command configures the switch to authorize commands entered through the console." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa group server radius", "cmd": "aaa group server radius group_name\nno aaa group server radius group_name\ndefault aaa group server radius group_name", "desc": "The aaa group server radius command enters the Server-group-RADIUS Configuration Mode for the specified group name." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa group server tacacs+", "cmd": "aaa group server tacacs+ group_name\nno aaa group server tacacs+ group_name\ndefault aaa group server tacacs+ group_name", "desc": "The aaa group server tacacs+ command enters Server-group-TACACS+ Configuration Mode for the specified group name." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "aaa root", "cmd": "aaa root SECURITY_LEVEL [ENCRYPT_TYPE] [password]\nno aaa root\ndefault aaa root", "desc": "The aaa root command specifies the password security level for the root account and can assign a password to the account." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "auto-certificate protocol connection", "cmd": "auto-certificate protocol est profile_name connection retry [count retries |\ninterval seconds", "desc": "The auto-certificate protocol connection command configures parameters for Enrollment over Secure Transport (EST) profiles used for Automatic Certificate Management." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "auto-certificate protocol credentials", "cmd": "auto-certificate protocol est profile_name credentials [enroll | re-enroll]", "desc": "The auto-certificate protocol credentials command configures the enrollment and reenrollment usernames and pairs or JSON Web Tokens (JWTs)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "auto-certificate protocol disabled", "cmd": "auto-certificate protocol est profile_name disabled", "desc": "The auto-certificate protocol disabled command temporarily pauses retrieving certificates from the server by disabling the profile and prevents sending unnecessary requests to the server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "auto-certificate protocol server", "cmd": "auto-certificate protocol est profile_name server [ssl ssl_profile] [url server_url]", "desc": "The auto-certificate protocol server command configures EST server behavior and options such as SSL profiles, server URLs, and VRFs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "auto-certificate profile", "cmd": "auto-certificate profile profile_name [digest [sha256 | sha384 | sha512]]", "desc": "The auto-certificate profile command allows configuration of Automatic Certificate Management and profiles for X." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "auto-certificate profile parameters", "cmd": "auto-certificate profile profile_name parameters [distinguished-name [commonname common_name] [country country_code] [email email_address ] [locality\nauto-certificate profile profile_name parameters [subject-alternative-name [dns", "desc": "The auto-certificate profile parameters command configures the certificate attributes including distinguished name and subject alternative name." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "clear aaa authentication lockout", "cmd": "clear aaa authentication lockout [user user_name]", "desc": "The clear aaa authentication lockout command clears the locked status of a user and allows access within a lockout period." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "clear aaa counters radius", "cmd": "clear aaa counters radius", "desc": "The clear aaa counters radius command resets the counters tracking the statistics for the RADIUS servers that the switch accesses." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "clear aaa counters tacacs+", "cmd": "clear aaa counters tacacs+", "desc": "The clear aaa counters tacacs+ command resets the counters tracking the statistics for the TACACS+ servers that the switch accesses." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "clear aaa counters", "cmd": "clear aaa counters [SERVICE_TYPE]", "desc": "The clear aaa counters command resets the counters tracking the number of service transactions performed by the switch since the last reset of the counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "clear radius proxy counters client group", "cmd": "clear radius proxy client group group_name", "desc": "The clear radius proxy client group command clears RADIUS proxy client packet counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "deny (Role)", "cmd": "no deny [MODE_NAME] command command_name\ndefault deny [MODE_NAME] command command_name", "desc": "The deny command adds a deny rule to the configuration mode role." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "enable password", "cmd": "enable password [ENCRYPT_TYPE] password\nno enable password\ndefault enable password", "desc": "The enable password command creates a new enable password or changes an existing password." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "ip radius source-interface", "cmd": "ip radius [vrf_inst] source-interface slot_number\nno ip radius [vrf_inst] source-interface\ndefault ip radius [vrf_inst] source-interface", "desc": "The ip radius source-interface command specifies the interface from which the IPv4 or IPv6 address is derived for use as the source for outbound RADIUS packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "ip tacacs source-interface", "cmd": "ip tacacs [VRF_INST] source-interface INT_NAME\nno ip tacacs [VRF_INST] source-interface\ndefault ip tacacs [VRF_INST] source-interface", "desc": "The ip tacacs source-interface command specifies the interface from which the IPv4 or IPv6 address is derived for use as the source for outbound TACACS+ packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "no (Role)", "cmd": "no sequence_num\ndefault sequence_num", "desc": "The no command removes the rule with the specified sequence number from the configuration-mode role." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "monitor server radius", "cmd": "monitor server radius\nno monitor server radius", "desc": "The monitor server radius command enters the Monitor Server RADIUS Configuration Mode and allows the configuration of RADIUS server monitoring on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "probe interval", "cmd": "probe interval period seconds\nno probe interval", "desc": "The probe interval command in the Monitor Server RADIUS Configuration Mode configures EOS to send probes to the RADIUS server at specific time intervals to ensure the availability of the server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "probe method", "cmd": "probe method [[access-request username username password password ] | [statusserver]]\nno probe method", "desc": "The probe method command in the Monitor Server RADIUS Configuration Mode determines the type of probe sent to the RADIUS server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "probe threshold", "cmd": "probe threshold failure number\nno probe threshold failure", "desc": "The probe threshold command in the Monitor Server RADIUS Configuration Mode configures sets the number of consecutive failed probes before determining a RADIUS server has become nonresponsive." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "radius proxy", "cmd": "radius proxy", "desc": "The radius proxy command enters the RADIUS Proxy Configuration Mode on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "radius proxy client group client", "cmd": "radius proxy client group group_name client [host host_name] | [ipv4 ipv4_addr] | [ipv6\nipv6_addr]", "desc": "The radius proxy client group client command configures RADIUS Proxy client groups on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "radius proxy client group server", "cmd": "radius proxy client group group_name server group_name", "desc": "The radius proxy client group server command configures RADIUS Proxy server groups on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "radius proxy client key", "cmd": "radius proxy client key [0 | 7 | 8a] line", "desc": "The radius proxy client key command enters the RADIUS Proxy Configuration Mode on a switch and allows the configuration of a global client key." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "radius proxy client session", "cmd": "radius proxy client session idle-timeout seconds", "desc": "The radius proxy client session command enters the RADIUS proxy configuration mode on a switch and allows the configuration of a client session idle-timeout parameter." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "radius proxy dynamic-authorization", "cmd": "radius proxy dynamic-authorization", "desc": "The radius proxy client key command enters the RADIUS proxy configuration mode on a switch and enables dynamic authorization for RADIUS proxy server groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "radius-server deadtime", "cmd": "radius-server deadtime dead_interval\nno radius-server deadtime\ndefault radius-server deadtime", "desc": "The radius-server deadtime command defines global deadtime period, when the switch ignores a non-responsive RADIUS server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "radius-server host", "cmd": "radius-server host ADDR [VRF_INST][AUTH][ACCT][TIMEOUT][DEAD][RETRAN][ENCRYPT]\nno radius-server host [ADDR][VRF_INST][AUTH][ACCT]\ndefault radius-server host [ADDR][VRF_INST][AUTH][ACCT]", "desc": "The radius-server host command sets parameters for communicating with a specific RADIUS server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "radius-server key", "cmd": "radius-server key [ENCRYPT_TYPE] encrypt_key\nno radius-server key\ndefault radius-server key", "desc": "The radius-server key command defines the global encryption key the switch uses when communicating with any RADIUS server for which a key is not defined." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "radius-server retransmit", "cmd": "radius-server retransmit count\nno radius-server retransmit\ndefault radius-server retransmit", "desc": "The radius-server retransmit command defines the global retransmit count, which specifies the number of times the switch attempts to access the RADIUS server after the first timeout expiry." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "radius-server timeout", "cmd": "radius-server timeout time_period\nno radius-server timeout\ndefault radius-server timeout", "desc": "The radius-server timeout command defines the global timeout the switch uses when communicating with any RADIUS server for which a timeout is not defined." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "resequence (Role)", "cmd": "resequence start_num inc_num", "desc": "The resequence command assigns sequence numbers to rules in the configuration mode role." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "permit (Role)", "cmd": "no permit [MODE_NAME] command ] command_name\ndefault permit [MODE_NAME] command command_name", "desc": "The permit command adds a permit rule to the configuration mode role." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "role", "cmd": "role role_name\nno role role_name\ndefault role role_name", "desc": "The role command places the switch in Role Configuration Mode, which is a group-change mode that modifies a role." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "server (server-group-RADIUS configuration mode)", "cmd": "server LOCATION [VRF_INST][AUTH][ACCT]\nno server LOCATION [VRF_INST][AUTH][ACCT]\ndefault server LOCATION [VRF_INST][AUTH][ACCT]", "desc": "The server (server-group-RADIUS configuration mode) command adds the specified RADIUS server to the configuration-mode group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "server (server-group-TACACS+ configuration mode)", "cmd": "server LOCATION [VRF_INST][PORT]\nno server LOCATION [VRF_INST][PORT]\ndefault server LOCATION [VRF_INST][PORT]", "desc": "The server (server-group-TACACS+ configuration mode) command adds the specified TACACS+ server to the configuration-mode group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "service dot1x", "cmd": "service dot1x\nno service dot1x", "desc": "The service dot1x command in the Monitor Server RADIUS Configuration Mode applies monitoring globally to the RADIUS servers used for 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show aaa", "cmd": "show aaa", "desc": "The show aaa command displays the user database." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show aaa authentication lockout", "cmd": "show aaa authentication lockout", "desc": "The show aaa authentication lockout command displays the status of locked-out users who could not log within the specified time and number of login attempts." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show aaa counters", "cmd": "show aaa counters", "desc": "The show aaa counters command displays the number of service transactions performed by the switch since the last time the counters were reset." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show aaa methods", "cmd": "show aaa methods [SERVICE_TYPE [accounting | authentication | authorization | all]]", "desc": "The show aaa methods command displays all the named method lists defined in the specified Authentication, Authorization, and Accounting (AAA) service." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show management ldap", "cmd": "show management ldap", "desc": "The show management ldap command displays information about the LDAP configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "fd7a:629f:52a4:dc25:b08d:feff:feed:2ce7", "cmd": "fd7a:629f:52a4:dc25:b08d:feff:feed:2ce7", "desc": "3FFF:FFFF::1\"" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show management security auto-certificate profile", "cmd": "show management security auto-certificate profile profile_name detail", "desc": "The show management security auto-certificate profile displays information about autocertificate profiles configured on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show management security auto-certificate protocol est", "cmd": "show management security auto-certificate protocol est [profile_name] [detail]", "desc": "The show management security auto-certificate protocol est command displays information about all Enrollment over Secure Transport (EST) protocol profiles configured on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show monitor server radius", "cmd": "show monitor server radius [detail]", "desc": "The show monitor server radius command in EXEC mode displays information about RADIUS server monitoring on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show privilege", "cmd": "show privilege", "desc": "The show privilege command displays the current privilege level for the CLI session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show radius", "cmd": "show radius", "desc": "The show radius command displays statistics for the RADIUS servers that the switch accesses." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show radius proxy client group", "cmd": "show radius proxy client group group_name", "desc": "The show radius proxy client group command displays information about RADIUS proxy configurations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show radius proxy server group", "cmd": "show radius proxy server group group_name", "desc": "The show radius proxy server group command displays information about RADIUS proxy server group configurations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show tacacs", "cmd": "show tacacs", "desc": "The show tacacs command displays statistics for the TACACS+ servers that the switch accesses." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show users accounts", "cmd": "show users accounts", "desc": "The show users accounts command displays the names, roles, and privilege levels of users that are listed in running-config." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show users detail", "cmd": "show users detail", "desc": "The show users detail command displays information about active AAA login sessions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show users roles", "cmd": "show users roles [ROLE_LIST]", "desc": "The show users roles command displays the name of the default role and the contents of the specified roles." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show users", "cmd": "show users", "desc": "The show users command displays the usernames that are currently logged into the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "tacacs-server host", "cmd": "tacacs-server host SERVER_ADDR [MULTIPLEX][VRF_INST][PORT][TIMEOUT][ENCRYPT]\nno tacacs-server host [SERVER_ADDR][MULTIPLEX][VRF_INST][PORT]\ndefault tacacs-server host [SERVER_ADDR][MULTIPLEX][VRF_INST][PORT]", "desc": "The tacacs-server host command sets communication parameters for communicating with a specific TACACS+ server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "tacacs-server key", "cmd": "tacacs-server key [ENCRYPT_TYPE] encrypt_key\nno tacacs-server key\ndefault tacacs-server key", "desc": "The tacacs-server key command defines the global encryption key the switch uses when communicating with any TACACS+ server for which a key is not defined." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "tacacs-server policy", "cmd": "tacacs-server policy unknown-mandatory-attribute ignore\nno tacacs-server policy unknown-mandatory-attribute ignore\ndefault tacacs-server policy unknown-mandatory-attribute ignore", "desc": "The tacacs-server policy command programs the switch to permit access to TACACS+ servers that send mandatory attribute-value (AV) pairs that the switch does not recognize." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "tacacs-server timeout", "cmd": "tacacs-server timeout time_period\nno tacacs-server timeout\ndefault tacacs-server timeout", "desc": "The tacacs-server timeout command defines the global timeout the switch uses when communicating with any TACACS+ server for which a timeout is not defined." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "username ssh-key", "cmd": "username name sshkey KEY\nno username name sshkey [role]\ndefault username name sshkey [role]", "desc": "The username ssh-key command configures an SSH key for the specified username." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "username", "cmd": "username name [PRIVILEGE_LEVEL] SECURITY [ROLE_USER]\nno username name [role]\ndefault username name [role]", "desc": "The username command adds a username to the local file and optionally assigns a password to the username." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "Transport Layer Security", "cmd": "Transport Layer Security", "desc": "Transport Layer Security (TLS), the successor to Secure Sockets Layer (SSL), is a security protocol used to communicate between client and server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "copy file: certificate:", "cmd": "copy file: file_name certificate:", "desc": "The copy file: certificate: command copies the certificate to the certificate: file system." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "copy file: sslkey:", "cmd": "copy file: file_name sslkey:", "desc": "The copy file: sslkey: command copies the SSL key to the sslkey: file system." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "delete certificate:", "cmd": "delete certificate: certificate_name", "desc": "The delete certificate: command deletes a specified certificate from the certificate: file system on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "delete sslkey:", "cmd": "delete sslkey: key_name", "desc": "The delete sslkey: command deletes a SSL key from the sslkey: file system on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dir certificate:", "cmd": "dir certificate:", "desc": "The dir certificate: command displays the directory output of the certificate: file system on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dir sslkey:", "cmd": "dir sslkey:", "desc": "The dir sslkey: command displays the directory output of sslkey: file system on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "reset ssl diffie-hellman parameters", "cmd": "reset ssl diffie-hellman parameters", "desc": "The reset ssl diffie-hellman parameters command resets the Diffie-Hellman parameters file after a system reboot." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "security pki certificate generate", "cmd": "security pki certificate generate {self-signed |signing-request} certificate_name Key key_name", "desc": "The security pki certificate generate command generates a self-signed certificate or a Certificate Signing Request (CSR) certificate." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "security pki key generate", "cmd": "security pki key generate [rsa [2048 | 3072 | 4096] key_name", "desc": "The security pki key generate command generates a RSA key used to validate a specific certificate." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show management security ssl certificate", "cmd": "show management security ssl certificate [certificate_name]", "desc": "The show management security ssl certificate command displays information about the certificate." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show management security ssl crl", "cmd": "show management security ssl crl", "desc": "The show management security ssl crl command displays the basic information about the installed Certificate Revocation List (CRLs)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show management security ssl diffie-hellman", "cmd": "show management security ssl diffie-hellman", "desc": "The show management security ssl diffie-hellman command displays the Diffie-Hellman parameter information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show management security ssl key", "cmd": "show management security ssl key [key_name]", "desc": "The show management security ssl key command displays the RSA key information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show management security ssl profile", "cmd": "show management security ssl profile [profile_name]", "desc": "The show management security ssl profile command displays the SSL profile status information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "ssl profile", "cmd": "ssl profile profile_name", "desc": "The ssl profile command places the switch in the SSL profile configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "Authentication Process", "cmd": "Authentication Process", "desc": "The authentication that occurs between a supplicant, authenticator, and authentication server include the following processes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "Dot1x Dropped Counters", "cmd": "Dot1x Dropped Counters", "desc": "The Dot1x Dropped Counters count the packets dropped by dot1x interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "Dot1x Web Authentication FQDN Allowlist", "cmd": "Dot1x Web Authentication FQDN Allowlist", "desc": "When using dot1x captive portal authentication, supplicants receive the WEB-AUTH-START page to begin redirecting the HTTPS requests to a captive portal as a second step in the authentication process." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "web4.it.mycompany.com", "cmd": "web4.it.mycompany.com", "desc": "2033-05-17 20:33:23 web5." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "www1.eng.mycompany.com", "cmd": "www1.eng.mycompany.com", "desc": "2033-05-17 20:33:21" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "www1.eng.mycompany.com 2033-05-17 20:33:21", "cmd": "www1.eng.mycompany.com 2033-05-17 20:33:21", "desc": "(pending)" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "statistics packets dropped", "cmd": "statistics packets dropped\nno statistics packets dropped", "desc": "The statistics packets droppedcommand to configure the dot1x dropped counters on the switch in the dot1x configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "aaa unresponsive action traffic allow vlan", "cmd": "aaa unresponsive action traffic allow vlan VLAN-ID\nno unresponsive action traffic allow vlan", "desc": "The aaa unresponsive action traffic allow vlan enables the the dot1x AAA unresponsive VLAN feature on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "captive portal", "cmd": "captive portal url URL ssl profile profile access-list ipv4 ACL name bypass\nfqdn_wildcard request timeout seconds\nno captive portal url URL ssl profile profile access-list ipv4 ACL name bypass\nfqdn_wildcardrequest timeout seconds", "desc": "The captive portal command enables the 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "clear dot1x statistics", "cmd": "clear dot1x statistics INTERFACE_NAME", "desc": "The clear dot1x statistics command resets the 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "dot1x eapol", "cmd": "dot1x eapol unresponsive action traffic allow [vlan vlan_id]", "desc": "The dot1x eapol command places the switch into 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "dot1x mac based authentication", "cmd": "dot1x mac based authentication\nno dot1x mac based authentication\ndefault dot1x mac based authentication", "desc": "The dot1x mac based authentication command enables MAC-based authentication on the existing 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "dot1x mac based authentication delay", "cmd": "dot1x mac based authentication delay delay-time seconds\nno dot1x mac based authentication delay\ndefault dot1x mac based authentication delay", "desc": "The dot1x mac based authentication delay command enables MAC-based authentication delay." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "dot1x mac based authentication hold period", "cmd": "dot1x mac based authentication hold period hold period-time seconds\nno dot1x mac based authentication hold period\ndefault dot1x mac based authentication hold period", "desc": "The dot1x mac based authentication hold period command enables MAC-based authentication hold period." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "dot1x mac based authentication request-identity", "cmd": "dot1x mac based authentication request-identity common\nno dot1x mac based authentication request-identity common\ndefault dot1x mac based authentication request-identity common", "desc": "The dot1x mac based authentication request-identity command in the Global Configuration Mode sends identity requests at 60 second intervals until successfully authenticating the EAPOL supplicant." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dot1x pae authenticator", "cmd": "dot1x pae authenticator\nno dot1x pae authenticator\ndefault dot1x pae authenticator", "desc": "The dot1x pae authenticator command sets the port access entity (PAE) type of the configuration mode interface to authenticator, which enables IEEE 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "dot1x reauthentication", "cmd": "dot1x reauthentication\nno dot1x reauthentication\ndefault dot1x reauthentication", "desc": "The dot1x reauthentication command configures the configuration mode interface to require reauthentication from clients at regular intervals." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dot1x reauthorization request limit", "cmd": "dot1x reauthorization request limit attempts\nno dot1x reauthorization request limit\ndefault dot1x reauthorization request limit", "desc": "The dot1x reauthorization request limit command configures how often the switch retransmits an 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dot1x system-auth-control", "cmd": "dot1x system-auth-control\nno dot1x system-auth-control\ndefault dot1x system-auth-control", "desc": "The dot1x system-auth-control command enables 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dot1x timeout quiet-period", "cmd": "dot1x timeout quiet-period quiet_time\nno dot1x timeout quiet-period\ndefault dot1x timeout quiet-period", "desc": "If the switch fails to immediately authenticate the client, the switch waits a specified time configured with the dot1x timeout quiet-period command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dot1x timeout reauth-period", "cmd": "dot1x timeout reauth-period reauth_time\nno dot1x timeout reauth-period\ndefault dot1x timeout reauth-period", "desc": "The dot1x timeout reauth-period command specifies the time period that the configuration mode interface waits before requiring re-authentication from clients." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dot1x timeout tx-period", "cmd": "dot1x timeout tx-period tx_time\nno dot1x timeout tx-period\ndefault dot1x timeout tx-period", "desc": "The authenticator establishes authentication and re-authentication by sending Extensible Authentication Protocol (EAP) requests to the supplicant, and the supplicant sends a reply which the authenticator forwards" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dot1x host-mode", "cmd": "dot1x host-mode [multi-host | single-host | multi-host authenticated]\nno dot1x host-mode\ndefault dot1x host-mode", "desc": "When multiple clients are connected to an Ethernet interface providing 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dot1x port-control", "cmd": "dot1x port-control STATE\nno dot1x port-control\ndefault dot1x port-control", "desc": "The dot1x port-control command configures the configuration mode interface as an authenticator port and specifies whether it will authenticate traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "neighbor classification", "cmd": "neighbor classification post-auth action port-flap\nno neighbor classification post-auth action port-flap\ndefault neighbor classification post-auth action port-flap", "desc": "The neighbor classification command in the Global Configuration Mode centralizes how the switch responds when it identifies a device, such as a VoIP phone, and moves between different classes such as moving from a generic host to a phone." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "neighbor resolution", "cmd": "neighbor resolution interface interface [ neighbor ipv4 | ipv6] ] [mac-address\nmac_address]\nno neighbor resolution", "desc": "The neighbor resolution command in the Global Configuration Mode enters the Neighbor Resolution Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "radius mtu", "cmd": "radius mtu bytes\nno radius mtu", "desc": "The radius mtu command in the Dot1X Configuration Mode configures the size of the RADIUS AccessRequest Maximum Transmission Unit (MTU) for an 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show dot1x all brief", "cmd": "show dot1x all brief", "desc": "The show dot1x all brief command displays the IEEE 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show dot1x hosts", "cmd": "show dot1x hosts [ethernet]", "desc": "The show dot1x hosts command displays 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show dot1x statistics", "cmd": "show dot1x INTERFACE_NAME statistics", "desc": "The show dot1x statistics command displays 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show dot1x", "cmd": "show dot1x INTERFACE_NAME INFO", "desc": "The show dot1x command displays 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show dot1x captive-portal bypass", "cmd": "show dot1x captive-portal bypass address [ipv4 | ipv6]", "desc": "The show dot1x captive-portal bypass command displays information about dot1x captive portal bypass configurations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show dot1x captive-portal resolutions", "cmd": "show dot1x captive-portal resolutions address [ipv4 | ipv6]", "desc": "The show dot1x captive-portal resolutions command displays information for all reverse DNS resolution entries in use by the captive portal." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "web4.it.arista.com", "cmd": "web4.it.arista.com", "desc": "2033-05-17 20:33:23 web5." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "Static IP NAT", "cmd": "Static IP NAT", "desc": "Static NAT configurations create a one-to-one mapping and translate a particular address to another address." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Static NAT Configuration Considerations", "cmd": "interface ethernet 1", "desc": "Egress VLAN Filter for Static NAT When a static source NAT is configured on an interface, the source IP translation happens only for those packets going 'out' of this interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "Dynamic NAT", "cmd": "Dynamic NAT", "desc": "Dynamic NAT offers a solution when fewer outside addresses are available than the number of internal hosts requiring external access." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "Prefix", "cmd": "clear ip nat flow translation", "desc": "12 switch# Clearing IP NAT Table Entries Use the clear ip nat flow translation command to remove all or the specified NAT table entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Dynamic NAT Configuration Considerations", "cmd": "interface port-channel 319", "desc": "Configuring Dynamic NAT Using Pools in a L2 Adjacent Network When configuring many-to-one dynamic NAT using a NAT pool, and the next hop router for the NAT device is on the same network (L2 adjacent), you must configure the IP addresses in the NAT po…" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "Dynamic NAT Peer State Synchronization", "cmd": "Dynamic NAT Peer State Synchronization", "desc": "The NAT peer state synchronization provides redundancy and resiliency for dynamic NAT across a pair of devices to avoid a single NAT device failure." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "Prefix", "cmd": "Prefix", "desc": "12 switch# • These commands display specific information for the address pools configured on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "IP NAT Commands", "cmd": "IP NAT Commands", "desc": "IP NAT Commands • clear ip nat flow translation • ip address • ip nat destination static • ip nat pool • ip nat source dynamic • ip nat source static • ip nat translation counters • ip nat translation low-mark" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "clear ip nat flow translation", "cmd": "clear ip nat flow translation [HOST_ADDR [DEST_ADDR]][INTF][PROT_TYPE]", "desc": "The clear ip nat flow translation command clears all or the specified NAT table entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "ip address", "cmd": "ip address [ipv4_subnet][PRIORITY]\nno ip address [ipv4_subnet][PRIORITY]\ndefault ip address [ipv4_subnet][PRIORITY]", "desc": "The ip address command configures the IPv4 address and connected subnet on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "ip nat destination static", "cmd": "ip nat destination static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE][group\nno ip nat destination static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE] [group\ndefault ip nat destination static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE][group", "desc": "The ip nat destination static command enables NAT of a specified destination address for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "ip nat pool", "cmd": "ip nat pool pool_name [ADDRESS_SPAN] SUBNET_SIZE\nno ip nat pool pool_name\ndefault ip nat pool pool_name", "desc": "The ip nat pool command identifies a pool of addresses using start address, end address, and either netmask or prefix length." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "ip nat source dynamic", "cmd": "ip nat source dynamic access-list acl_name POOL_TYPE\nno ip nat source dynamic access-list acl_name\ndefault ip nat source dynamic access-list acl_name", "desc": "The ip nat source dynamic command enables NAT of a specified source address for packets sent and received on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "ip nat source static", "cmd": "ip nat source static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE] [group group_number]\nno ip nat source static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE] [group group_number]\ndefault ip nat source static ORIGINAL [FILTER] TRANSLATED [PROT_TYPE] [group", "desc": "The ip nat source static command enables NAT of a specified source address for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "ip nat synchronization", "cmd": "ip nat synchronization [description description] [expiry-interval seconds]", "desc": "The ip nat synchronization command places the switch into the NAT Synchronization Configuration Mode and configures NAT Synchronization to provide redundancy and resiliency for dynamic NAT across a pair of switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "ip nat translation counters", "cmd": "ip nat translation counters\nno ip nat translation counters\ndefault ip nat translation counters\nconnections exceed 275, it can cause unpredictable behavior including restart of FocalPointV2 agent. The\nrestart of FocalPointV2 agent results in traffic disruption.", "desc": "The ip nat translation counters command enables the feature to count packets that are translated by static and twice NAT rules in hardware." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "ip nat translation low-mark", "cmd": "ip nat translation low-mark threshold\nno ip nat translation low-mark\ndefault ip nat translation low-mark", "desc": "The ip nat translation low-mark command configures the minimum threshold that triggers the resumption of programming new NAT translation connections." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "ip nat translation max-entries", "cmd": "ip nat translation max-entries connections\nno ip nat translation max-entries\ndefault ip nat translation max-entries", "desc": "The ip nat translation max-entries command specifies maximum number of NAT translation connections." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "ip nat translation tcp-timeout", "cmd": "ip nat translation tcp-timeout period\nno ip nat translation tcp-timeout\ndefault ip nat translation tcp-timeout", "desc": "The ip nat translation tcp-timeout command specifies the translation timeout period for translation table entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "ip nat translation udp-timeout", "cmd": "ip nat translation udp-timeout period\nno ip nat translation udp-timeout\ndefault ip nat translation udp-timeout", "desc": "The ip nat translation udp-timeout command specifies the translation timeout period for translation table entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "show ip nat access-list interface", "cmd": "show ip nat access-list interface [INTF][LISTS]", "desc": "The show ip nat acl interface command displays the access control lists (ACLs) that are configured as source NAT or destination NAT filters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "show ip nat pool", "cmd": "show ip nat pool POOL_SET", "desc": "The show ip nat pool command displays the configuration of the address pool." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "p2", "cmd": "p2", "desc": "Applying NAT profile on a Tunnel Interface" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "p3", "cmd": "p3", "desc": "Applying NAT profile on a Tunnel Interface" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "show ip nat synchronization advertised-translations", "cmd": "show ip nat synchronization advertised-translations", "desc": "The show ip nat synchronization advertised-translations command displays the detailed status of devices that are advertised to a peer device." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "show ip nat synchronization discovered-translations", "cmd": "show ip nat synchronization discovered-translations", "desc": "The show ip nat synchronization discovered-translations command displays details of what has been advertised from a peer device." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "show ip nat synchronization peer", "cmd": "show ip nat synchronization peer", "desc": "The show ip nat synchronization peer command displays the detailed status of a peer device." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "show ip nat translation", "cmd": "show ip nat translation", "desc": "The show ip nat translation command displays configured NAT statements in the switch hardware." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN Tagged MACsec", "cmd": "VLAN Tagged MACsec", "desc": "Media Access Control Security (MACsec) is configured on subinterfaces using the mac security profile command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "an (MACsec)", "cmd": "an an_number key key_type key_string\nno an an_number\ndefault an an_number", "desc": "The an command defines an Association Number (AN) and a Secure Association Key (SAK) for use in the selected channel in MACsec." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "cipher", "cmd": "cipher encryption_standard", "desc": "The cipher command configures the cipher authentication for MAC security on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dot1x pae supplicant", "cmd": "dot1x pae supplicant", "desc": "The dot1x pae supplicant command applies the supplicant profile by enabling it on the Mac Security interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dot1x timeout reauth-timeout-ignore always", "cmd": "dot1x timeout reauth-timeout-ignore always", "desc": "The dot1x timeout reauth-timeout-ignore always command retains the current port state without blocking it, irrespective of when the authentication server is unreachable or in case of supplicant timeouts." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dot1x", "cmd": "dot1x", "desc": "The dot1x command places the switch in the dot1x mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "entropy source hardware", "cmd": "entropy source hardware", "desc": "The entropy source hardware command generates the cryptographic keys to strengthen the random number generator used by MACsec." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "identifier (MACsec)", "cmd": "identifier MAC_address\nno identifier\ndefault identifier", "desc": "The identifier command defines a Secure Channel Identifier (SCI) for the Rx or Tx secure channel for use with MACsec static Secure Association Keys (SAKs)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "key (MACsec)", "cmd": "key ", "desc": "The key command configures the primary key to activate the MACsec profile Note: Optionally a fallback CAK can also be configured on a profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "key retirement immediate", "cmd": "key retirement immediate", "desc": "The key retirement immediate command configures the key retirement feature on the key server and assists the key server to decide the principal actor for SAK distribution by triggering the re-election of principal" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "license (Global Mode)", "cmd": "license [[import URL] | update]", "desc": "The license command configures EOS licenses on the switch under the global configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "license (MACsec)", "cmd": "license licensee_name license_value", "desc": "The license command configures the MACsec license on the switch under the MAC Security configuration mode using a hex key." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "l2-protocol", "cmd": "l2-protocol ethernet-flow-control [bypass | encrypt]\nno l2-protocol ethernet-flow-control [bypass | encrypt]\ndefault l2-protocol ethernet-flow-control [bypass | encrypt]", "desc": "The command l2-protocol configures the Layer 2 protocol processing for MACsec." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "mac security", "cmd": "mac security\nno mac security\ndefault mac security", "desc": "The mac security command enables MAC security provision on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "mac security profile", "cmd": "mac security profile profile-name\nno mac security profile profile-name\ndefault mac security profile profile-name", "desc": "The mac security profile command applies a MACsec profile to an interface or subinterface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "mka key-server", "cmd": "mka key-server [priority value]", "desc": "The mka key-server command configures key server among the MACsec peers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "mka session", "cmd": "mka session [rekey-period value]", "desc": "The mka session command configures period at which the SAK is refreshed ." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "profile (MACsec)", "cmd": "profile profile-name", "desc": "The profile command places the switch in MAC Security Profile configuration mode and creates a MACsec profile if a profile of the specified name does not already exist." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "replay", "cmd": "replay protection {disabled | window window_size}\nno replay protection {disabled | window window_size}\ndefault replay protection {disabled | window window_size}", "desc": "The replay command configures the action to be taken when packets received are not in order, based on their packet numbers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "sci", "cmd": "sci", "desc": "The sci command add a Secure Channel Identifier (SCI) in data packets for MACsec on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "secure channel (MACsec)", "cmd": "secure channel {Rx|Tx}", "desc": "The secure channel command enters MAC Security Profile Static SAK Secure Channel configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show dot1x supplicant", "cmd": "show dot1x supplicant", "desc": "The show dot1x supplicant command displays the 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mac security counters detail", "cmd": "show mac security counters detail", "desc": "The show mac security counters detail command to displays the detail information about the MACsec security counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mac security counters", "cmd": "show mac security counters", "desc": "The show mac security counters command to displays information about the MACsec security counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mac security interface detail", "cmd": "show mac security interface detail", "desc": "The show mac security interface detail command displays the detail information about the MACsec on the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mac security interface", "cmd": "show mac security interface", "desc": "The show mac security interface command shows information about MACsec on the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mac security mka counters", "cmd": "show mac security mka counters", "desc": "The show mac security mka counters command to display information about the MACsec MKA counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mac security participants detail", "cmd": "show mac security participants detail", "desc": "The show mac security participants detail command displays detail information about the MACsec participants." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mac security profile", "cmd": "show mac security profile [profile_name]", "desc": "The show mac security profile command displays information about the specified MACsec profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "show mac security sak", "cmd": "show mac security sak [interface ethernet Ethernet_interface]", "desc": "The show mac security sak command displays information about MACsec static secure association key (SAK) status for the specified Ethernet interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mac security status", "cmd": "show mac security status", "desc": "The show mac security status command displays the MACsec status information on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "supplicant profile", "cmd": "supplicant profile profile_name options", "desc": "The supplicant profile command configures the supplicant profile containing all the credentials necessary for 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "traffic unprotected allow", "cmd": "traffic unprotected allow\nno traffic unprotected allow", "desc": "The traffic unprotected allow command configures the switch to allow the unprotected traffic whenever there is no successful MKA session established with the peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "IPsec Introduction", "cmd": "IPsec Introduction", "desc": "Internet Protocol Security (IPsec) is a protocol suite for securing Internet Protocol (IP) communications by authenticating and encrypting each IP packet of a communication session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "IPsec Overview", "cmd": "IPsec Overview", "desc": "Internet Protocol Security (IPsec)" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "IPSec Key Length Support", "cmd": "IPSec Key Length Support", "desc": "EOS provides a restriction on the combinations of IKE and IPSec algorithms used for a security combination." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "ike policy", "cmd": "ike policy policy-name\nno ike policy policy-name", "desc": "The ike policy command configures the Internet Security Association and Key Management Protocol on the switch and related policies." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "interface tunnel (IPsec)", "cmd": "interface tunnel value\nno interface tunnel value", "desc": "The interface tunnel command places the switch in the Interface Tunnel Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "ip security", "cmd": "ip security\nno ip security", "desc": "The ip security command places the switch in the IP Security Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "ip security encryption key-length", "cmd": "ip security encryption key-length aligned\nno ip security encryption key-length\ndefault ip security encryption key-length", "desc": "The ip security encryption key-length command in the IP Security Configuration Mode enables key-length checking for IKE and IPSec algorithms." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "sa policy", "cmd": "sa policy policy_name\nno sa policy policy_name", "desc": "The sa policy command specifies a Security Association (SA) policy used for IPsec configuration, and enters IP security SA policy configuration mode to configure the named policy." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip security applied-profile", "cmd": "show ip security applied-profile", "desc": "The show ip security applied-profile command displays the IP security profile names and the corresponding interfaces with the profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip security connection", "cmd": "show ip security connection", "desc": "The show ip security connection command displays the IP security connection status information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip security encryption", "cmd": "show ip security encryption key-length status", "desc": "The show ip security encryption command displays the IP security encryption status information." }, { "os": "eos", "role": "firewall", "vendor": "Arista", "cat": "System", "title": "show ip security policy", "cmd": "show ip security policy", "desc": "The show ip security policy command displays the IP security policy information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip security profile", "cmd": "show ip security profile", "desc": "The show ip security profile command displays the IP security profile information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip security security-association", "cmd": "show ip security security-association", "desc": "The show ip security security-association command displays the IP security SA information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "System Requirements", "cmd": "System Requirements", "desc": "The system requirements to effectively run MSS are listed below." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "dynamic device-set", "cmd": "dynamic device-set device-set_name\nno dynamic device-set device-set_name", "desc": "The dynamic device-set command configures a device such as a firewall to communicate with the MSS in the MSS configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "exception device", "cmd": "exception device unreachable [bypass | redirect]\nno exception device unreachable [bypass | redirect]\ndefault exception device unreachable bypass", "desc": "The exception device command bypasses or continues redirecting traffic to service device such as a firewall if the service device control-plane API is unreachable after initial policies have been processed." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "group", "cmd": "group group_name\nno group group_name", "desc": "The group command configures the Panorama device group name to be used with MSS." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "name-resolution interval (CVX-OpenStack)", "cmd": "name-resolution interval period", "desc": "The name-resolution interval command specifies the period between consecutive requests that the OpenStack controller sends to the Keystone service for VM and tenant name updates." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "service mss", "cmd": "service mss\nno service mss\ndefault service mss", "desc": "The service mss command enters the MSS configuration sub-mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show service mss dynamic device-set", "cmd": "show service mss dynamic device-set device_set_name [device device_name [group-members |\nhigh-availability | neighbors | network | policies | resources]]", "desc": "The show service mss dynamic device-set command displays detailed information about a specific service device set." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show service mss policy", "cmd": "show service mss policy [[device device_name][name policy-name][source (static | plugin_name)]]", "desc": "The show service mss policy command displays generic information about the configuration and operational state of the macro-segmentation service (MSS) policies on a device." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show service mss status", "cmd": "show service mss status", "desc": "The show service mss status command displays the status of a macro-segmentation service (MSS) on the device." }, { "os": "eos", "role": "firewall", "vendor": "Arista", "cat": "System", "title": "show service mss zone", "cmd": "show service mss zone [[device device_name]|[name zone_name]|[source (static | dynamic_source)]]", "desc": "The show service mss zone command displays information about the interfaces that are placed in a single zone by the service device." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "state", "cmd": "state [active | shutdown | suspend]\nno state", "desc": "The state command configures device set as active or disabled or suspended state." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "tag", "cmd": "tag tag_name\nno tag\ndefault tag", "desc": "The tag command specifies the tag or tags that MSS searches when it is reading the security policy from the firewall or firewall manager in the dynamic device-set configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "type palo-alto", "cmd": "type palo-alto [firewall | panorama]\nno type palo-alto", "desc": "The type palo-alto command configures the firewall type to be used in the MSS configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Port Settings – Trust Mode and Traffic Class", "cmd": "Port Settings – Trust Mode and Traffic Class", "desc": "Ethernet and port channel interfaces support three QoS trust modes: • CoS Trust: Ports use inbound packet CoS field contents to derive the traffic class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Traffic Classes", "cmd": "Traffic Classes", "desc": "Data stream distribution is based on their traffic classes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "ACL Policing", "cmd": "ACL Policing", "desc": "ACL policing monitors the ingress data rates for a particular class of traffic and performs the action configured when the traffic exceeds the user configured value." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "IPv6 Flow Label Matches for QoS", "cmd": "IPv6 Flow Label Matches for QoS", "desc": "Certain packets may include a flow label in their IPv6 headers when the source requests special handling by routers, such as for a media stream or other “real-time” service, among others." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Traffic Class Derivations – Arad Platform Switches", "cmd": "qos map cos 1 3 5 7 to traffic-class 5", "desc": "Traffic Classes describes traffic classes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "ACL Policing – Arad Platform Switches", "cmd": "class-map type qos match-any class1", "desc": "ACL Policing describes ACL policing." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Traffic Class", "cmd": "qos map traffic-class 1 3 5 to tx-queue 1", "desc": "DSCP Rewrite Value Transmit Queues and Port Shaping – FM6000 Platform Switches Transmit Queues and Port Shaping describes transmit queues and port shaping." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Traffic Class", "cmd": "default interface ethernet 7", "desc": "DSCP Transmit Queues and Port Shaping – Trident and Tomahawk Platform Switches Transmit Queues and Port Shaping describes transmit queues and port shaping." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Traffic Class Derivations – Petra Platform Switches", "cmd": "platform petraA petra3/4 traffic-class 5", "desc": "Traffic Classes describes traffic classes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "ACL Based QoS (DCS-7160)", "cmd": "ACL Based QoS (DCS-7160)", "desc": "The IPv4 ACL based QoS is enabled on switches through policy-map configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "ACL based QoS on SVIs", "cmd": "ACL based QoS on SVIs", "desc": "The ACL based QoS policy applied on SVIs modify the QoS parameters for SVI traffic (L3 VLAN) based on ACL classification." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "ACL Sharing on QoS", "cmd": "ip access-list acl1", "desc": "The ACLs applied on QoS shares the hardware resources (TCAM) when potentially large QoS policy-maps are applied to multiple SVIs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "txQueue Percentage-based Shaping", "cmd": "txQueue Percentage-based Shaping", "desc": "When you enable this feature using the qos tx-queue shape rate percent percentage adaptive command, QoS calculates the txQueue shape rate based the available bandwidth and not the link speed." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "bandwidth guaranteed (Helix)", "cmd": "bandwidth guaranteed DATA_MIN\nno bandwidth guaranteed\ndefault bandwidth guaranteed", "desc": "The bandwidth guaranteed command specifies the minimum bandwidth for outbound traffic on the transmit queue." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "bandwidth guaranteed (Trident II)", "cmd": "bandwidth guaranteed rate DATA_MIN\nno bandwidth guaranteed\ndefault bandwidth guaranteed", "desc": "The bandwidth guaranteed command specifies the minimum bandwidth for outbound traffic on the transmit queue." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "bandwidth percent (Arad/Jericho)", "cmd": "bandwidth percent proportion\nno bandwidth percent\ndefault bandwidth percent", "desc": "The bandwidth percent command configures the bandwidth share of the transmit queue when configured for round robin priority." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "color", "cmd": "color COLOR-VALUE [color-only [exact-match | [endpoint-match [any | null]]]]", "desc": "Use the color command for the ability to configure the color extended community in route-map set clauses and in an extcommunity-list for inbound and outbound policy application." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "dscp to traffic-class (DSCP map)", "cmd": "dscp dscp_classes to traffic-class traffic_class\ndefault dscp dscp_classes to traffic-class\nno dscp dscp_classes to traffic-class", "desc": "The dscp to traffic-class command configures the specified QoS map to map one or more DSCP classes to a traffic class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "hardware access-list qos resource sharing vlan in", "cmd": "hardware access-list qos resource sharing vlan in\nno hardware access-list qos resource sharing vlan in", "desc": "The hardware access-list qos resource sharing vlan in command enables the ACL based QoS resources sharing on a VLAN interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "interface fabric (Trident II)", "cmd": "interface fabric", "desc": "The interface fabric command places the switch in Fabric-interface configuration mode and allows the user to attach the QoS profile to the fabric interface of the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "ip extcommunity-list", "cmd": "ip extcommunity-list WORD [permit | deny][COLOR-EXPRESSION]\nno ip extcommunity-list WORD [permit | deny] COLOR-EXPRESSION]\ndefault ip extcommunity-list WORD [permit | deny][COLOR-EXPRESSION]", "desc": "The ip extcommunity-list command adds a color extended community to an extcommunitylist." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "mc-tx-queue", "cmd": "mc-tx-queue queue_level", "desc": "The mc-tx-queue command places the switch in mc-tx-queue configuration mode to configure a multicast transmit queue on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "platform petraA traffic-class", "cmd": "platform petraA [CHIP_NAME] traffic-class tc_value\nno platform petraA [CHIP_NAME] traffic-class\ndefault platform petraA [CHIP_NAME] traffic-class", "desc": "The platform petraA traffic-class command configures the default traffic class used by all ports on a specified chip." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "priority (Arad/Jericho)", "cmd": "priority strict\nno priority\ndefault priority", "desc": "The priority command specifies the priority of the transmit queue." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos cos", "cmd": "qos cos cos_value\nno qos cos\ndefault qos cos", "desc": "The qos cos command specifies the default class of service (CoS) value of the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos dscp", "cmd": "qos dscp dscp_value\nno qos dscp\ndefault qos dscp", "desc": "The qos dscp command specifies the default Differentiated Services Code Point (DSCP) value of the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos map cos", "cmd": "qos map cos cos_value_1 [cos_value_2 ... cos_value_n] to traffic-class tc_value [dropprecedence dp_value]\nno qos map cos cos_value_1 [cos_value_2 ... cos_value_n ]\ndefault qos map cos cos_value_1 [cos_value_2 ... cos_value_n]", "desc": "The qos map cos command associates a traffic class to a list of class of service (CoS) settings." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos map dscp", "cmd": "qos map dscp dscpv_1 [dscpv_2...dscpv_n] to traffic-class tc_value\nno qos map dscp dscpv_1 [dscpv_2...dscpv_n]\ndefault qos map dscp dscpv_1 [dscpv_2...dscpv_n]", "desc": "The qos map dscp command associates a traffic class to a set of Differentiated Services Code Point (DSCP) values." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos map dscp to traffic-class", "cmd": "qos map dscp to traffic-class name map_name\nno qos map dscp to traffic-class name map_name\ndefault qos map dscp to traffic-class name map_name", "desc": "The qos map dscp to traffic-class command puts the switch in DSCP Map Configuration mode for the specified QoS map." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "qos map dscp to traffic-class (MPLS tunnel termination VRF)", "cmd": "qos map dscp to traffic-class map_name\nno qos map dscp to traffic-class map_name\ndefault qos map dscp to traffic-class map_name", "desc": "The qos map dscp to traffic-class command assigns a DSCP-to-traffic-class map to a VRF, replacing the global map or previous custom map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos map traffic-class to cos", "cmd": "qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to cos cos_value\nno qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to cos\ndefault qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to cos", "desc": "The qos map traffic-class to cos command associates a class of service (CoS) to a list of traffic classes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos map traffic-class to dscp", "cmd": "qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to dscp dscp_value\nno qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to dscp\ndefault qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to dscp", "desc": "The qos map traffic-class to dscp command associates a Differentiated Services Code Point (DSCP) value to a list of traffic classes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos map traffic-class to mc-tx-queue", "cmd": "qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to mc-tx-queue mtq_value\nno qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to mc-tx-queue\ndefault qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to mc-tx-queue", "desc": "The qos map traffic-class to mc-tx-queue command associates a multicast transmit queue to a list of traffic classes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos map traffic-class to tx-queue", "cmd": "qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to tx-queue txq_value\nno qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to tx-queue\ndefault qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to tx-queue", "desc": "The qos map traffic-class to tx-queue command associates a transmit queue (tx-queue) to a list of traffic classes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos map traffic-class to uc-tx-queue", "cmd": "qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to uc-tx-queue utq_value\nno qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to uc-tx-queue\ndefault qos map traffic-class tc_num_1 [tc_num_2 ... tc_num_n] to uc-tx-queue", "desc": "The qos map traffic-class to uc-tx-queue command associates a unicast transmit queue to a list of traffic classes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos profile", "cmd": "qos profile profile_name\nno qos profile profile_name\ndefault qos profile profile_name", "desc": "The qos profile command places the switch in QoS profile configuration mode and for the specified profile and creates the profile if it does not already exist." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos random-detect ecn allow non-ect chip-based (Tomahawk and Trident)", "cmd": "qos random-detect ecn allow non-ect chip-based\nno qos random-detect ecn allow non-ect chip-based\ndefault qos random-detect ecn allow non-ect chip-based", "desc": "The qos random-detect ecn allow non-ect chip-based enables per color queue thresholds using color based queue thresholds and drop-precedence values along with drop of non-ect traffic by allowing non-ect and set drop-precedence 1 in a policy map simultaneously." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos random-detect ecn global-buffer (Helix)", "cmd": "qos random-detect ecn global-buffer minimum-threshold MIN maximum-threshold MAX\nno qos random-detect ecn global-buffer\ndefault qos random-detect ecn global-buffer", "desc": "The qos random-detect ecn global-buffer command enables ECN marking for globally shared packet memory and specifies minimum and maximum queue threshold sizes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos rewrite cos", "cmd": "qos rewrite cos\nno qos rewrite cos\ndefault qos rewrite cos", "desc": "The qos rewrite cos command enables the rewriting of the CoS field for outbound tagged packets that were received on DSCP trusted ports and untrusted ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos rewrite dscp", "cmd": "qos rewrite dscp\nno qos rewrite dscp\ndefault qos rewrite dscp", "desc": "The qos rewrite dscp command enables the rewriting of the DSCP field for outbound tagged packets that were received on CoS trusted ports and untrusted ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos tx-queue shape rate precision", "cmd": "qos tx-queue shape rate precision 50Mbps\nno qos tx-queue shape rate precision\ndefault qos tx-queue shape rate precision", "desc": "The qos tx-queue shape rate precision command in the Global Configuration Mode configures Tx Queue Precision Shaping on switches with a low configured rate." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos trust", "cmd": "qos trust [MODE]\nno qos trust [MODE]\ndefault qos trust", "desc": "The qos trust command configures the quality of service port trust mode for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "random-detect ecn (Arad/Jericho)", "cmd": "random-detect ecn minimum-threshold [MIN | MAX]| maximum-threshold [MIN | MAX]\nno random-detect ecn\ndefault random-detect ecn", "desc": "The random-detect ecn command enables ECN marking for the configuration mode unicast transmit queue and specifies threshold queue sizes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "random-detect ecn (Helix)", "cmd": "random-detect ecn minimum-threshold [MIN | MAX] maximum-threshold [MIN | MAX]\nno random-detect ecn\ndefault random-detect ecn", "desc": "The random-detect ecn command enables ECN marking for the configuration mode unicast transmit queue and specifies threshold queue sizes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "random-detect ecn delay threshold", "cmd": "random-detect ecn delay threshold [microseconds | milliseconds ]", "desc": "The random-detect ecn delay threshold command configures latency-based ECN on a per transmit queue basis." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "service-policy type qos input", "cmd": "service-policy type qos input policy_map_name\nno service-policy type qos input policy_map_name\ndefault service-policy type qos input policy_map_name", "desc": "The service-policy type qos input command applies the specified policy map to a QoS profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "service-profile", "cmd": "service-profile profile_name\nno service-profile profile_name\ndefault service-profile profile_name", "desc": "The command applies the QoS profile to the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "set extcommunity", "cmd": "set extcommunity COLOR-EXPRESSION [additive | delete]\nno set extcommunity COLOR-EXPRESSION [additive | delete]\ndefault set extcommunity COLOR-EXPRESSION [additive | delete]", "desc": "The set extcommunity command adds a color extended community to be applied to routes affected by the route-map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "shape rate (Interface – Arad/Jericho)", "cmd": "shape rate byte_limit [kbps]\nno shape rate\ndefault shape rate", "desc": "The shape rate command specifies the maximum bandwidth for outbound traffic on the configuration mode interface, also known as queue shaping." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "shape rate (Interface – Helix)", "cmd": "shape rate DATA_LIMIT\nno shape rate\ndefault shape rate", "desc": "The shape rate command specifies the maximum bandwidth for outbound traffic on the configuration mode interface, also known as queue shaping." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "shape rate (Interface – Petra)", "cmd": "shape rate data_limit [kbps]\nno shape rate\ndefault shape rate", "desc": "The shape rate command specifies the maximum bandwidth for outbound traffic on the configuration mode interface, also known as queue shaping." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show interface counters queue drop-precedence", "cmd": "show interface counters queue drop-precedence", "desc": "The show interface counters queue drop-precedence command displays the dropprecedence counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform petraA traffic-class", "cmd": "show platform petraA traffic-class\nshow platform petraA CHIP_NAME traffic-class\nshow platform petraA MODULE_NAME traffic-class", "desc": "The show platform petraA traffic-class command displays the traffic class assignment on all specified Petra chips." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show platform trident tcam qos detail", "cmd": "show platform trident tcam qos detail", "desc": "The show platform trident tcam qos detail command displays the list of all the SVIs that are sharing the TCAM entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show platform trident tcam shared vlan interface-class-id", "cmd": "show platform trident tcam shared vlan interface-class-id", "desc": "The show platform trident tcam shared vlan interface-class-id command displays what SVIs are currently sharing the QoS policy-map in the below output under QoS PMAP Data." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show platform xp qos tcam hit", "cmd": "show platform xp qos tcam hit", "desc": "The show platform xp qos tcam hit command displays the TCAM entries programmed for each policy-map as well as the traffic hits." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show policy-map interface", "cmd": "show policy-map interface interface_name", "desc": "The show policy-map interface command displays contents of the policy map applied to specified the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show policy-map", "cmd": "show policy-map policy_map_name [counters][interface | summary]", "desc": "The show policy-map command displays the policy map information for the configured policy map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show qos interfaces random-detect ecn", "cmd": "show qos interfaces [INTERFACE_NAME] random-detect ecn", "desc": "The show qos interfaces random-detect ecn command displays the Explicit Congestion Notification (ECN) configuration for each transmit queue on the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show qos interfaces trust", "cmd": "show qos interfaces [INTERFACE_NAME] trust", "desc": "The show qos interfaces trust command displays the configured and operational QoS trust mode of all specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show qos interfaces", "cmd": "show qos interfaces INTERFACE_NAME", "desc": "The show qos interfaces command displays the QoS, DSCP, and transmit queue configuration on a specified interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show qos interfaces latency maximum", "cmd": "show qos interfaces INTERFACE_NAME latency maximum", "desc": "The show qos interfaces latency maximum command displays the maximum latency tail-drop threshold active on each Tx queue for a specified interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show qos maps", "cmd": "show qos maps", "desc": "The show qos maps command lists the number of traffic classes that the switch supports and displays the CoS-Traffic Class, DSCP-Traffic Class, Traffic Class-CoS, and Traffic Class-Transmit Queue maps." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show qos map dscp to traffic-class", "cmd": "show qos map dscp to traffic-class [ map_name ]", "desc": "The show qos map dscp to traffic-class command shows all DSCP to traffic-class maps, or one specified DSCP to TC map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show qos profile summary", "cmd": "show qos profile summary", "desc": "The show qos profile summary command displays the QoS profile summary of those which are part of the running configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show qos profile", "cmd": "show qos profile profile_name", "desc": "The show qos profile command displays the contents of the specified QoS profile or of all QoS profiles in the running configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show qos random-detect ecn", "cmd": "show qos random-detect ecn", "desc": "The command displays the global Explicit Congestion Notification (ECN) configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show qos tx-queue shape rate precision", "cmd": "show qos tx-queue shape rate precision", "desc": "The show qos tx-queue shape rate precision command displays information about Tx Queue Precision Shaping on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show run|grep sharing", "cmd": "show run|grep sharing", "desc": "The show run|grep sharing command displays whether the QoS policy-map sharing on SVIs is enabled or disabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "tx-queue (Arad/Jericho)", "cmd": "tx-queue queue_level", "desc": "The tx-queue command places the switch in Tx-queue configuration mode to configure a transmit queue on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "uc-tx-queue", "cmd": "uc-tx-queue queue_level", "desc": "The uc-tx-queue command places the switch in the uc-tx-queue configuration mode to configure a unicast transmit queue on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "Traffic Management", "cmd": "Traffic Management", "desc": "This chapter describes Traffic Management on Arista switches, including configuration instructions and command descriptions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "Traffic Management Conceptual Overview", "cmd": "Traffic Management Conceptual Overview", "desc": "Traffic is managed through policy maps that apply data shaping methods to specific data streams." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Segment Routing Traffic Engineering Policy (SR-TE)", "cmd": "Segment Routing Traffic Engineering Policy (SR-TE)", "desc": "Segment Routing Traffic Engineering Policy (SR-TE) policy uses Segment Routing (SR) to enable a headend to steer traffic along any path without maintaining per flow state in every node based on the policy." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "from 100.1.1.2 (100.1.1.2)", "cmd": "from 100.1.1.2 (100.1.1.2)", "desc": "Origin INCOMPLETE, metric 0, localpref 100, IGP metric 0, weight 0, received 00:01:29 ago, valid, internal, best Community: no-advertise Rx SAFI: SR TE Policy The following command displays information about a specific candidate path including the co…" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Traffic Management Configuration Arad Platform Switches", "cmd": "Traffic Management Configuration Arad Platform Switches", "desc": "Traffic policies are implemented by policy maps, which are applied to the control plane, or to L3 interfaces for Policy-Based Routing (PBR)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Traffic Management Configuration FM6000 Platform Switches", "cmd": "Traffic Management Configuration FM6000 Platform Switches", "desc": "Traffic policies are implemented by policy maps, which are applied to the control plane or an interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Traffic Management Configuration Petra Platform Switches", "cmd": "Traffic Management Configuration Petra Platform Switches", "desc": "Traffic policies are implemented by policy maps, which are applied to the control plane." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Traffic Management Configuration Trident Platform Switches", "cmd": "Traffic Management Configuration Trident Platform Switches", "desc": "Traffic policies are implemented by policy maps, which are applied to the control plane or an interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Traffic Management Configuration Trident II Platform Switches", "cmd": "Traffic Management Configuration Trident II Platform Switches", "desc": "Traffic policies are implemented by policy maps, which are applied to the control plane or an interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Traffic Management Configuration Commands", "cmd": "Traffic Management Configuration Commands", "desc": "Traffic Policy (Control Plane) Configuration Commands • bandwidth (policy-map-class (control-plane) Arad) • bandwidth (policy-map-class (control-plane) FM6000) • bandwidth (policy-map-class (control-plane) Helix)" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "action set-ttl", "cmd": "action set-time [set-ttl | set-ttl-3b]\nno action set-time [set-ttl | set-ttl-3b]\ndefault action set-time [set-ttl | set-ttl-3b]", "desc": "The TTL action is effective only when it is configured along with a set nexthop or nexthop-group action." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "bandwidth (policy-map-class (control-plane) Arad)", "cmd": "bandwidth kbps kilobits\nno bandwidth\ndefault bandwidth", "desc": "The bandwidth command specifies the minimum bandwidth for traffic filtered by the configuration mode policy map class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "bandwidth (policy-map-class (control-plane) FM6000)", "cmd": "bandwidth pps packets\nno bandwidth\ndefault bandwidth", "desc": "The bandwidth command specifies the minimum bandwidth for traffic filtered by the configuration mode policy map class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "class (policy-map (control-plane) Arad)", "cmd": "class class_name\nno class class_name\ndefault class class_name", "desc": "The class command places the switch in policy-map-class (control plane) configuration mode, which is a group change mode for changing bandwidth and shape parameters associated with a specified class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "class (policy-map (control-plane) Trident)", "cmd": "class class_name [PLACEMENT]\nno class class_name [PLACEMENT]\ndefault class class_name [PLACEMENT]", "desc": "The class command places the switch in policy-map-class (control plane) configuration mode, which is a group change mode for changing bandwidth and shape parameters associated with a specified class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "class (policy-map (pbr)", "cmd": "no [sequence_number] class class_name\ndefault [sequence_number] class class_name\nno [sequence_number]\ndefault [sequence_number]", "desc": "The class (policy-map (pbr) command places the switch in policy-map-class (pbr) configuration mode, which is a group change mode that modifies the specified class of the configuration mode PolicyBased Routing (PBR) policy map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "class-map type copp", "cmd": "class-map type copp match-any class_name\nno class-map type copp [match-any] class_name\ndefault class-map type copp [match-any] class_name", "desc": "The class-map type copp command places the switch in Class-Map (control plane) configuration mode, which is a group change mode that modifies a control-plane dynamic class map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "class-map type pbr", "cmd": "class-map type pbr match-any map_name\nno class-map type pbr match-any map_name\ndefault class-map type pbr match-any map_name", "desc": "The class-map type pbr command places the switch in the class-map (pbr) configuration mode for the specified class map, and creates the class map if one does not already exist." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "class-map type qos", "cmd": "class-map type qos match-any class_name\nno class-map type qos match-any class_name\ndefault class-map type qos match-any class_name", "desc": "The class-map type qos command places the switch in the class-map (QoS) configuration mode, which is a group change mode that modifies a QoS dynamic class map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "clear policy-map counters", "cmd": "clear policy-map INTERFACE_NAME counters MAP_NAME", "desc": "The clear policy-map command resets the specified policy map counters to zero." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "feature pbr", "cmd": "feature pbr ip [copy]\nno feature pbr ip [copy]\ndefault feature pbr ip [copy]\nfeature pbr ipv6 [copy | bank]\nno feature pbr ipv6 [copy | bank]\ndefault featue pbr ipv6 [copy | bank]", "desc": "Policy-Based Routing (PBR) is a feature that is applied on IPv4 or IPv6 routable ports, to preferentially route packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "feature traffic-policy cpu", "cmd": "feature traffic-policy cpu [ipv4 | ipv6]\nno feature traffic-policy cpu [ipv4 | ipv6]\ndefault feature traffic-policy cpu [ipv4 | ipv6]", "desc": "The feature traffic-policy cpu command configures the CPU traffic policy features for the IPv4 and IPv6 traffic in user-defined TCAM profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "feature traffic-policy port", "cmd": "feature traffic-policy port [ipv4 | ipv6]\nno feature traffic-policy port [ipv4 | ipv6]\ndefault feature traffic-policy port [ipv4 | ipv6]", "desc": "The feature traffic-policy port command configures the port-related traffic policy features for the IPv4 and IPv6 traffic in user-defined TCAM profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "match (class-map (control-plane) Helix)", "cmd": "match ip access-group list_name\nno match ip access-group list_name\ndefault match ip access-group list_name", "desc": "The match command assigns an ACL to the configuration mode class map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "match (class-map (control-plane) Trident II)", "cmd": "list_name\nlist_name\nlist_name", "desc": "The match command assigns an ACL to the configuration mode class map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "match (class-map (control-plane) Trident)", "cmd": "match IP_VERSION access-group list_name\nno match IP_VERSION access-group list_name\ndefault match IP_VERSION access-group list_name", "desc": "The match command assigns an ACL to the configuration mode class map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "match (class-map (pbr))", "cmd": "no [sequence_number] match [ip | ipv6] access-group list_name\ndefault [sequence_number] [ip | ipv6] access-group list_name\nno [sequence_number]\ndefault [sequence_number]", "desc": "The match command assigns ACLs to the configuration mode Policy-Based Routing (PBR) class map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "match (class-map (qos) Trident II)", "cmd": "IP_VERSION list_name\nIP_VERSION list_name\nIP_VERSION list_name", "desc": "The match command assigns an ACL to the configuration mode class map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "match (policy-map (pbr))", "cmd": "no match ip SOURCE_ADDR DEST_ADDR [set nexthop [recursive] NH-addr_1 [NH-addr_2] ...\ndefault match match ip SOURCE_ADDR DEST_ADDR [set nexthop [recursive] NH-addr_1\nno SEQ_NUM\ndefault SEQ_NUM", "desc": "The match command creates a policy map clause entry that specifies one filtering condition." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "platform arad tcam counters feature", "cmd": "platform arad tcam counters feature [OPTIONS]\nno platform arad tcam counters feature [OPTIONS]\ndefault platform arad tcam counters feature [OPTIONS]", "desc": "The platform arad tcam counters feature command enables incrementing PBR hardware counters corresponding to ACL." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "policy-map type copp", "cmd": "policy-map type copp copp-system-policy\nno policy-map type copp copp-system-policy\ndefault policy-map type copp copp-system-policy", "desc": "The policy-map type copp command places the switch in the policy-map (control plane) configuration mode, which is a group change mode that modifies a control-plane policy map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "policy-map type pbr", "cmd": "policy-map type pbr map_name\nno policy-map type pbr map_name\ndefault policy-map type pbr map_name", "desc": "The policy-map type pbr command places the switch in policy-map (pbr) configuration mode, which is a group change mode that modifies a Policy-Based Routing (PBR) policy map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "policy-map type quality-of-service", "cmd": "policy-map type quality-of-service map_name\nno policy-map type quality-of-service map_name\ndefault policy-map type quality-of-service map_name", "desc": "The policy-map type quality-of-service command places the switch in the policy-map (QoS) configuration mode, which is a group change mode that modifies a QoS policy map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "policy-map type quality-of-service counter", "cmd": "policy-map type quality-of-service counter per-interface\nno policy-map type quality-of-service counter per-interface\ndefault policy-map type quality-of-service counter per-interface", "desc": "The policy-map type quality-of-service counter command in the Global Configuration Mode configures per interface counters for policy map and class map matches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "policy-map type quality-of-service policer", "cmd": "policy-map type quality-of-service policer copy map_name\npolicy-map type quality-of-service policer drop counter\nno policy-map type quality-of-service policer\ndefault policy-map type quality-of-service policer", "desc": "The policy-map type quality-of-service policer copy command is used to copy an existing QoS policy map to the policy map policer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "resequence (class-map (pbr))", "cmd": "resequence [start_num [inc_num]]", "desc": "The resequence command assigns sequence numbers to rules in the configuration mode class map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "service-policy type pbr (Interface mode)", "cmd": "service-policy type pbr TRAFFIC_DIRECTION map_name\nno service-policy type pbr TRAFFIC_DIRECTION map_name\ndefault service-policy type pbr TRAFFIC_DIRECTION map_name", "desc": "The service-policy pbr command applies the specified Policy-Based Routing (PBR) policy map to the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "service-policy type qos (Interface mode)", "cmd": "service-policy [type qos] TRAFFIC_DIRECTION map_name\nno service-policy [type qos] TRAFFIC_DIRECTION map_name\ndefault service-policy [type qos] TRAFFIC_DIRECTION map_name", "desc": "The service-policy command applies a specified policy map to the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "set (policy-map-class (qos) FM6000)", "cmd": "set QOS_TYPE value\nno set QOS_TYPE\ndefault set QOS_TYPE", "desc": "The set command specifies traffic resolution methods for traffic defined by its associated class map in its configuration mode policy map class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "set nexthop (policy-map-class pbr)", "cmd": "set nexthop [recursive] NH-addr_1 [NH-addr_2] ... [NH-addr_n]\nno set nexthop [recursive]\ndefault set nexthop [recursive]", "desc": "The set nexthop command specifies the next hop for traffic defined by its associated class map in its configuration mode policy map class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "set nexthop-group (policy-map-class(pbr) Arad)", "cmd": "set nexthop-group group_name\nno set nexthop-group group_name\ndefault set nexthop-group group_name", "desc": "The set nexthop-group command specifies a nexthop group as the next hop for traffic defined by its associated class map in its configuration mode policy map class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "shape (policy-map-class (control-plane) FM6000)", "cmd": "shape pps packets\nno shape\ndefault shape", "desc": "The shape command specifies the maximum bandwidth for traffic filtered by the configuration mode policy map class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "shape (policy-map-class (control-plane) Petra)", "cmd": "shape kbps kilobits\nno shape\ndefault shape", "desc": "The shape command specifies the maximum bandwidth for traffic filtered by the configuration mode policy map class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "show class-map type control-plane", "cmd": "show class-map type control-plane [MAP_NAME]", "desc": "The show class-map command displays contents of available control-plane class maps." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show class-map type pbr", "cmd": "show class-map type pbr [map_name]", "desc": "The show class-map command displays contents of all available Policy-Based Routing (PBR) class maps, or of a specified PBR class map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show class-map type qos", "cmd": "show class-map type qos [MAP_NAME]", "desc": "The show class-mapcommand displays contents of all available QoS class maps." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show policy-map copp", "cmd": "show policy-map copp copp-system-policy", "desc": "The show policy-map copp command displays contents of the control-plane policy map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show policy-map interface type qos counters", "cmd": "show policy-map [INTERFACE_NAME][type qos][TRAFFIC] counters", "desc": "The show policy-map interface command displays the quantity of packets that are filtered by ACLs applied to a interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show policy-map interface type qos", "cmd": "show policy-map interface INTERFACE_NAME [type qos] [TRAFFIC]", "desc": "The show policy-map interface command displays contents of the policy maps applied to specified interfaces or to the control plane." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show policy-map type copp", "cmd": "show policy-map type copp copp-system-policy [CMAP_NAME]", "desc": "The show policy-map type copp command displays contents of control plane policy maps." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show policy-map type pbr", "cmd": "show policy-map type pbr [PMAP_NAME][DATA_LEVEL]", "desc": "The show policy-map pbr command displays contents of Policy-Based Routing (PBR) policy maps." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show policy-map type qos counters", "cmd": "show policy-map type qos pmap_name [TRAFFIC] counters [INFO_LEVEL]", "desc": "The show policy-map counters command displays the quantity of packets that are filtered by the ACLs that comprise a specified QoS policy map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show policy-map type qos", "cmd": "show policy-map [type qos][PMAP_NAME [CMAP_NAME]]", "desc": "The show policy-map qos command displays contents of QoS policy maps." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show traffic-policy", "cmd": "show traffic-policy NAME interface\nshow traffic-policy interface [DETAILS]", "desc": "The show traffic-policy command displays traffic policy information on the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "x", "cmd": "x", "desc": "y z Non-fiber media type, or fiber wavelength PHY encoding Number of WWDM wavelengths or XAUI Lanes C = Copper F = Serial SMF K = Backplane L = Long (1310 nm) S = Short (850 nm) R = LAN PHY (64B/66B) No value = 1 (serial) 4 = 4 WWDM" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Power over Ethernet (PoE)", "cmd": "Power over Ethernet (PoE)", "desc": "Selected Arista switches provide Power over Ethernet (PoE) to power connected devices." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Show Commands", "cmd": "show interface Ethernet15/1 transceiver eeprom", "desc": "• show interface transceiver eeprom The show interface transceiver eeprom command displays the parsed capabilities." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "ps/nm", "cmd": "ps/nm", "desc": "V" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "ps", "cmd": "ps", "desc": "V" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "ps^2", "cmd": "ps^2", "desc": "V" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "dB", "cmd": "dB", "desc": "V" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "krad/s", "cmd": "krad/s", "desc": "%" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "Show Commands", "cmd": "show qos scheduling group G1 Ethernet1", "desc": "• QoS configuration on one or more scheduling groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Management Interfaces", "cmd": "Management Interfaces", "desc": "A management interface is a Layer 3 host port that is typically connected to a management station for performing out-of-band switch management tasks." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "Dynamic Link Flap Damping", "cmd": "Dynamic Link Flap Damping", "desc": "Overview Dynamic Link Flap Damping detects interfaces with excessive numbers of update messages (flapping) on the network and triggers a damping mechanism temporarily holding the interface’s link in a down state." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Port Groups (QSFP+ and SFP+ Interface Selection)", "cmd": "hardware port-group 1 select Et17-20", "desc": "Several of Arista’s fixed switches limit the number of 10 Gb/s data lanes in operation through the use of port groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Duplex", "cmd": "Duplex", "desc": "full full full full full full full full full Speed Type 10G Not Present 10G Not Present 10G Not Present 10G Not Present 10G Not Present 10G Not Present 10G Not Present 10G Not Present 10G Not Present switch>" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Default QSFP Mode Support", "cmd": "Default QSFP Mode Support", "desc": "A QSFP+ transceiver supports 40GbE and 4x10GbE." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Show Commands", "cmd": "Show Commands", "desc": "There is no explicit show command to display the default QSFP mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Show Commands", "cmd": "show interfaces ethernet 26/1,31/1 phy diag test pattern", "desc": "To display the configured and operational test pattern, as well as the test patterns available for an interface, use the show interfaces command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Port Speed Capabilities", "cmd": "Port Speed Capabilities", "desc": "The Supported Speeds (Gb/s) table shows the various speeds supported on each Arista platform per interface type." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Speed", "cmd": "interface Ethernet1", "desc": "10G 10G 10G 10G Type Flags dot1q-encapsulation dot1q-encapsulation dot1q-encapsulation dot1q-encapsulation Maximum Latency Tail-drop Thresholds The maximum latency for tail-drop thresholds can be configured in interface configuration mode or in the Q…" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Speed and Duplex", "cmd": "Speed and Duplex", "desc": "In configuration mode the speed command affects the transmission speed and duplex setting of an interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Flow Control", "cmd": "interface ethernet 5", "desc": "Flow control is a data transmission option that temporarily stops a device from sending data because of a peer data overflow condition." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Hardware Counter Support", "cmd": "Hardware Counter Support", "desc": "Hardware counter support enables features requiring programmable hardware counter resources." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Hardware Counter Support Configuration", "cmd": "[no] hardware counter feature vlan-interface in", "desc": "You can enable hardware counter support on a per-feature basis using the hardware counter feature command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "action", "cmd": "no {fcs | symbol} action [linkfault | errdisable | log]\ndefault {fcs | symbol} action [linkfault | errdisable | log]", "desc": "The action command configures the link monitoring action that is specified for the link fault signaling event." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "clear counters", "cmd": "clear counters [vlan vlanId | tunnel tunnelID][[route][ipv4 | ipv6][vrf]]", "desc": "The clear counters command in privileged EXEC mode resets the counters to zero for the specified interfaces including VLAN interfaces, sub-Interfaces, and GRE tunnel interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "clear VXLAN counters", "cmd": "clear VXLAN counters [[vni | [vtep [vtep-ip-address | unlearnt]]]", "desc": "Use the clear VXLAN counters command to clear the VXLAN encapsulation and decapsulation counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "cfm", "cmd": "interface |routing}", "desc": "The cfm command places the switch in CFM configuration mode to configure connectivity fault management on a Layer 3 interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "cfm continuity-check", "cmd": "continuity-check loc-state action disable interface routing", "desc": "The cfm command places the switch in CFM configuration mode to configure connectivity fault management on a Layer 3 interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "cfm domain", "cmd": "domain main-domain level 5", "desc": "The cfm domain domain-name command places the switch in CFM configuration mode to configure a maintenance domain on a device." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "cfm measurement", "cmd": "measurement loss [inband | synthetic]", "desc": "The cfm measurement command places the switch in CFM configuration mode to configure Ethernet OAM loss on a device." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "cfm measurement delay", "cmd": "measurement delay single-ended tx-interval [10 | 100 | 1000 | 10000 | 60000 |", "desc": "The cfm measurement delay command configures Ethernet OAM Delay Measurement on a transmitter switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "cfm measurement loss", "cmd": "measurement loss [inband | synthetic] tx-interval [10 | 100 | 1000 | 10000 |", "desc": "The cfm measurement loss command configures a switch as an Initiator or Responder for Ethernet OAM Loss Measurement for frame loss on large networks." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "cfm profile", "cmd": "profile profile-name alarm indication client level 0-7 tx-interval 1-1 [minutes |seconds]", "desc": "The cfm profile command places the switch in CFM configuration mode to configure a CFM profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "extensions vrf", "cmd": "extensions vrf all [disable]\nno extensions vrf\ndefault extensions vrf", "desc": "The extensions vrf command in the ICMP Error Extensions Configuration Mode enables or disables ICMP error extensions on all VRFs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "feature", "cmd": "feature", "desc": "The feature command allows the user to reserve the number of TCAM banks for the following features: ACL, flow-spec, IPsec, l2-protocol, PBR, QoS, TCP-MSS-ceiling, and traffic-policy." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "flowcontrol receive", "cmd": "flowcontrol receive state\nno flowcontrol receive\ndefault flowcontrol receive", "desc": "The flowcontrol receive command configures administrative settings for inbound flow control packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "flowcontrol send", "cmd": "flowcontrol send state\nno flowcontrol send\ndefault flowcontrol send", "desc": "The flowcontrol send command configures administrative settings for outbound flow control packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "hardware counter feature", "cmd": "ipv6 ][ vrf name][ ip-address | ip-address-prefix]][[gre tunnel interface][ in | out]]\nno hardware counter feature [[vlan-interface | subinterface] [ in | out]][vni [encap | decap]][[route [\nipv4 | ipv6 ][ vrf name][ ip-address | ip-address-prefix]][[gre tunnel interface][ in | out]]", "desc": "You can enable the hardware counter feature functionality from global configuration mode on a per feature basis." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "hardware counter feature in (DCS-7050x, 7350x, 7300x)", "cmd": "hardware counter feature [interface] in\nno hardware counter feature [interface] in", "desc": "The hardware counter feature command enables the switch to count the ingress traffic on a Layer 3 port of the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "hardware port-group", "cmd": "hardware port-group port_group_id select port_group_mode\nno hardware port-group port_group_id [ select port_group_mode ]\ndefault hardware port-group port_group_id [ select port_group_mode ]", "desc": "The hardware port-group command configures a port group to activate either a single interface at a higher speed, such as a QSFP-DD at 400 Gb/s, or multiple interfaces at a lower speed, such as QSFP-56" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "hardware tcam", "cmd": "hardware tcam\nno hardware tcam\ndefault hardware tcam", "desc": "The hardware tcam command is the top-level global configuration command used to enter the TCAM configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "icmp error extensions", "cmd": "icmp error extensions\nno icmp error extensions\ndefault icmp error extensions", "desc": "The icmp error extensions command in the Router General Configuration Mode configures global ICMP Error Extensions and determines how VRFs manage ICMP Error Extensions as well as configure specific parameters related to ICMP error messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "icmp error extensions extensions", "cmd": "icmp error extensions extensions [disable]\nno icmp error extensions extensions\ndefault icmp error extensions extensions", "desc": "The icmp error extensions extensions command in the Router General VRF Configuration Mode enables or disables ICMP Error Extensions for a VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "icmp error extensions ip", "cmd": "icmp error extensions [ip | ip6] access-group acl_name\nno icmp error extensions [ip | ip6\ndefault icmp error extensions [ip | ip6]", "desc": "The icmp error extensions ip command in the Router General VRF Configuration Mode configures applies an ACL to ICMP error messages to control the generation of extended ICMP error responses on a specific VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "icmp error extensions nodeid", "cmd": "icmp error extensions nodeid [interface if_name] [ipv4 address ip_address ] [ipv6\naddress ipv6_address]\nno icmp error extensions nodeid\ndefault icmp error extensions nodeid", "desc": "The icmp error extensions nodeid command in the Router General VRF Configuration Mode configures the node identifier used in ICMP error messages to uniquely identify the source node." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "interface ethernet create", "cmd": "interface ethernet create sub_range", "desc": "The interface ethernet create command is used to configure a range of Ethernet subinterfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "interface ethernet", "cmd": "interface ethernet e_range", "desc": "The interface ethernet command places the switch in Ethernet-interface configuration mode for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "interface management", "cmd": "interface management m_range", "desc": "The interface management command places the switch in management-interface configuration mode for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "link-debounce", "cmd": "link-debounce time wait_time\nno link-debounce time wait_time\ndefault link-debounce time wait_time", "desc": "The link-debounce command configures the link debounce time for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "link-error", "cmd": "link-error\nno link-error\ndefault link-error", "desc": "The link-error command places the Ethernet Operations, Administration, and Management (EOAM) profile in the EOAM link-error sub-mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "mac-address", "cmd": "mac-address address\nno mac-address\ndefault mac-address", "desc": "The mac-address command assigns a MAC address to the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor ethernet oam profile", "cmd": "monitor ethernet oam profile name\nno monitor ethernet oam profile\ndefault monitor ethernet oam profile", "desc": "The monitor ethernet oam profile command applies the EOAM profile to the specific interface in interface configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor ethernet oam", "cmd": "monitor ethernet oam\nno monitor ethernet oam\ndefault monitor ethernet oam", "desc": "The monitor ethernet oam command places the switch in the Ethernet Operations, Administration, and Management (EOAM) configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "monitor link-flap policy default-profiles", "cmd": "monitor link-flap policy [default-profiles | profiles]", "desc": "The monitor link-flap policy default-profiles command permits you to enter the link-flap configuration mode and add a list of damping profiles as default profiles for the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "monitor link-flap policy profile damping", "cmd": "monitor link-flap profile profile_name damping", "desc": "The monitor link-flap policy profile command puts the switch in link-flap configuration mode and allows you to add damping profiles to the configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "nodeid", "cmd": "nodeid codepoint class_number\nno nodeid\ndefault nodeid>", "desc": "The nodeid command in the ICMP Error Extensions Configuration Mode configures the Class Number for the Node Identification Object." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "params", "cmd": "params include hostname\nno params\ndefault params", "desc": "The params command in the ICMP Error Extensions Configuration Mode configures ICMP error parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "penalty mac fault", "cmd": "penalty mac fault [local | remote] penalty_value", "desc": "The penalty mac fault parameter permits configuration of the Damping policy MAC fault changes after entering the Link-Flap Damping Profile Configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "penalty threshold", "cmd": "penalty threshold [maximum | reuse | suppression] penalty_value", "desc": "The penalty threshold parameter permits the configuration of the link-flap damping threshold for the penalty after entering the link-flap damping profile configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "period", "cmd": "no {fcs | symbol} period num {seconds | frames}\ndefault {fcs | symbol} period num {seconds | frames}", "desc": "The period command configures the link monitoring period for a link error in terms of number of frames or seconds." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "phy link detection aggressive", "cmd": "phy link detection aggressive\nno phy link detection aggressive\ndefault phy link detection aggressive", "desc": "The phy link detection aggressive command allows the configuration of interfaces for aggressive link-up declaration (~50 ms) on those interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "poe disabled", "cmd": "poe disabled\nno poe disabled\ndefault poe disabled", "desc": "Power over Ethernet (PoE) is enabled on all Ethernet ports by default on switches that support PoE." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "poe legacy detect", "cmd": "poe legacy detect\nno poe legacy detect\ndefault poe legacy detect", "desc": "IEEE-compliant Powered Devices (PDs) are recognized by a specific resistance signature to a test signal sent by the switch, but non-compliant (legacy or proprietary) PDs may use a capacitive signature instead." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "poe limit", "cmd": "poe limit {class class_num | watt_num watts}\nno poe limit\ndefault poe limit", "desc": "Power over Ethernet (PoE) power output is limited by the hardware-negotiated power level and by the total power capacity of the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "power budget", "cmd": "power budget [n] watts\nno power budget", "desc": "Power over Ethernet (PoE) budget is not set on all Ethernet ports by default on switches that support PoE." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "power budget exceed action (warning | hold-down)", "cmd": "power budget exceed action hold-down\nno power budget", "desc": "When the Power over Ethernet (PoE) ports exceeds the budgeted amount, the switch issues a warning and continues to provide additional power above the budgeted limit." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "profile", "cmd": "profile profileName copy [SOURCE_PROFILE_NAME]\nno profile PROFILE_NAME", "desc": "The profile command is used within the TCAM configuration mode to create a new, user-defined TCAM profile and enter its specific configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "qos scheduling", "cmd": "qos scheduling\nno qos scheduling", "desc": "The qos scheduling command places the switch in the QoS scheduling mode under which the scheduling groups and scheduling policies are configured for shared shaper across multiple subinterfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "recovery-time", "cmd": "recovery-time value\nno recovery-time value\ndefault recovery-time value", "desc": "The recovery-time command configures the recovery timeout value for link fault signaling." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "refresh traffic-policy field-set", "cmd": "refresh traffic-policy field-set [all | integer | ipv4 | ipv6 | l4-port | mac", "desc": "The refresh traffic-policy field-set provides the ability to refresh a field set for a traffic policy." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show cfm continuity-check end-point", "cmd": "show cfm continuity-check end-point [remote-defect | counters] [domain domain_name]", "desc": "The show cfm continuity-check command displays continuity and connectivity information for a CFM configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show cfm endpoint", "cmd": "show cfm end-point [domain domain_name][association association_ID][ end-point end_point_id]]]", "desc": "The show cfm command displays information about a CFM configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show cfm measurement delay proactive", "cmd": "show cfm measurement delay proactive [details]", "desc": "The show cfm measurement delay proactive command displays statistical information about the Ethernet OAM Delay Measurement configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show cfm measurement loss proactive", "cmd": "show cfm measurement loss [inband | synthetic] proactive [details]", "desc": "The show cfm measurement loss proactive command displays statistical information about the Ethernet OAM Loss Measurement configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show hardware counter", "cmd": "show hardware counter", "desc": "The show hardware counter command displays counter events across time intervals." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show hardware port-group", "cmd": "show hardware port-group", "desc": "The show hardware port-group command displays the status of DCS-7050Q-16 port-groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show hardware system forwarding-chips", "cmd": "show hardware system forwarding-chips", "desc": "The command show hardware system forwarding-chips displays information about the forwarding chips on your switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show icmp error extensions", "cmd": "show icmp error extensions [vrf vrf_name]", "desc": "The show icmp error extensions command displays information about the ICMP Error Extensions configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interface counters", "cmd": "show interface counters [ | MODIFIER ]", "desc": "The show interface counters command is a fundamental operational command that displays a tabular summary of the most important traffic statistics for all interfaces on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces counters ip", "cmd": "show interfaces counters ip", "desc": "Use the show interfaces counters ip command to display IPv4, IPv6 packets, and octets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces counters bins", "cmd": "show interfaces [interface] counters bins", "desc": "The show interfaces counters bins command displays packet counters, categorized by packet length, for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces counters errors", "cmd": "show interfaces [interface] counters errors", "desc": "The show interfaces counters errors command displays the error counters for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show interfaces counters queue", "cmd": "show interfaces [interface] counters queue", "desc": "The show interfaces counters queue command displays the queue drop counters for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces counters rates", "cmd": "show interfaces [interface] counters rates", "desc": "The show interfaces counters rates command displays the received and transmitted packet rate counters for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces counters", "cmd": "show interfaces [interface] counters [incoming]", "desc": "The show interface counters command displays the Layer 3 ingress traffic count information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces flow-control", "cmd": "show [interface] flow-control", "desc": "The show interfaces flow-control command displays administrative and operational flow-control data for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces hardware default", "cmd": "show interfaces [interface] hardware default", "desc": "The show interfaces hardware default command displays the static interface capability information of the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces hardware", "cmd": "show interfaces [interface] hardware", "desc": "The show interfaces hardware command displays the model number, interface type, duplex mode, and flow-control settings of the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces interactions", "cmd": "show interfaces [intf] interactions", "desc": "The show interfaces interactions command aims to provide users with a resource that explains various relationships between Ethernet interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "show interface link-flap damping", "cmd": "show interface link-flap damping", "desc": "The show interface link-flap damping command displays information about the configured dynamic link flap damping parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces negotiation", "cmd": "show interfaces [interface] negotiation [info_level]", "desc": "The show interfaces negotiation command displays the speed, duplex, and flow control autonegotiation status for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces phy", "cmd": "show interfaces [interface] phy [inf_level]", "desc": "The show interfaces phy command displays physical layer characteristics for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces status errdisabled", "cmd": "show interfaces [interface] status errdisabled", "desc": "The show interfaces status errdisabled command displays interfaces that are in errdisabled state, including their link status and errdisable cause." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces status", "cmd": "show interfaces [interface] status [status_type]", "desc": "The show interfaces status command displays the interface name, link status, vlan, duplex, speed, and type of the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "show interface transceiver dom", "cmd": "show interface Ethernet11/1 transceiver dom", "desc": "The show interface intf transceiver dom command displays the most important current performance data on the media (line) side." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces transceiver channels", "cmd": "show interfaces [interface e_range] transceiver channels", "desc": "The show interfaces transceiver channels command displays the current wavelength/frequency settings for the specified channels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces transceiver hardware", "cmd": "show interfaces [interface] ethernet e_range transceiver hardware", "desc": "The show interfaces transceiver hardware command displays the current wavelength/frequency settings for the specified transceiver interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces transceiver properties", "cmd": "show interfaces [interface] transceiver properties", "desc": "The show interfaces transceiver properties command displays configuration information for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces transceiver", "cmd": "show interfaces [interface] transceiver [data_format]", "desc": "The show interfaces transceiver command displays the operational transceiver data for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor ethernet oam profile", "cmd": "show monitor ethernet oam profile [name | summary]", "desc": "The show monitor ethernet oam profile command displays configuration information for the specified ethernet OAM profile name or the summary information of all configured profile names." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform fm6000 agileport map", "cmd": "show platform fm6000 agileport map", "desc": "The show platform fm6000 agileport map command displays the list of Ethernet interfaces that are combinable to form a higher-speed port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform trident flexcounters", "cmd": "show platform trident flexcounters [vni [egress summary | ingress summary]]|[[vtep [decap\nsummary | encap summary]]", "desc": "The show platform trident flexcounters command displays the L3 interfaces when the corresponding hardware counter feature is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform trident flexcounters l3intf", "cmd": "show platform trident flexcounters l3intf [[in | out] [summary | values]]", "desc": "Use the show platform trident flexcounters l3intf command to display the subinterface, SVI, and GRE tunnel interface features." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show poe", "cmd": "show poe [interface]", "desc": "The show poe command displays PoE information for a specified port range or for all ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show qos scheduling", "cmd": "show qos scheduling Options", "desc": "The show qos scheduling command displays the QoS configuration on one or more scheduling groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show route counters", "cmd": "show route [ipv4 | ipv6]", "desc": "Use the show route [ipv4 | ipv6] counters to display the IPv4 or IPv6 pack and byte counts." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "show transceiver status interface", "cmd": "show transceiver status interface Ethernet14/1", "desc": "The show transceiver status interface [interface_name] command displays the most important alarms, faults, and interface status." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show VXLAN counters vni", "cmd": "show VXLAN counters vni [encap | decap]", "desc": "Use the show VXLAN counters vni command to display the encapsulation and decapsulation counters at the VNI." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "speed", "cmd": "speed mode\nno speed\ndefault speed", "desc": "The speed command configures the transmission speed and duplex settings for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Vlan", "cmd": "switchport isolated\nno switchport isolated", "desc": "routed routed routed inactive Duplex full full full full Speed Type 10G 40GBASE-SR4 10G 40GBASE-SR4 10G 40GBASE-SR4 10G 40GBASE-SR4 switchport isolated The switchport isolated command in Interface Configuration Mode configures ports on interfaces as" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "system", "cmd": "system profile name", "desc": "The system command allows the user to configure the system-wide TCAM profiles: default, mirroring-acl, mpls-evpn, pbr-match-nexthop-group, qos, tap-aggregation-default, tap-aggregation-extended, tc-counters," }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "threshold", "cmd": "no [fcs | symbol] threshold threshold_value\ndefault [fcs | symbol] threshold threshold_value", "desc": "The threshold command configures the link monitoring threshold value that is specified for a link error." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "traffic-policies field-set", "cmd": "traffic-policies field-set [integer | ipv4 | ipv6 | l4-ports | mac | vlan][prefix field_set_name |", "desc": "The traffic-policies field-set creates field sets of prefixes, ports, or VLAN IDs to load from a location set by a URL." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "transceiver channel", "cmd": "transceiver channel channel_number grid-spacing spacing_grid\nno transceiver channel channel_number grid-spacing spacing_grid\ndefault transceiver channel channel_number grid-spacing spacing_grid", "desc": "The transceiver channel command sets the transceiver wavelength/frequency by channel number." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "transceiver qsfp default-mode", "cmd": "transceiver qsfp default-mode 4x10G\nno transceiver qsfp default-mode\ndefault transceiver qsfp default-mode\nbe modified or removed in the current release.", "desc": "The transceiver qsfp default-mode command specifies the transmission mode of all QSFP transceiver modules that are not explicitly configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Port Channels and LACP", "cmd": "Port Channels and LACP", "desc": "This chapter describes channel groups, port channels, port channel interfaces, and the Link Aggregation Control Protocol (LACP)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Port Channel Introduction", "cmd": "Port Channel Introduction", "desc": "Arista’s switching platforms support industry-standard link aggregation protocols." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Port Channel Conceptual Overview", "cmd": "Port Channel Conceptual Overview", "desc": "/ 30.0 (Gbps)" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Channel Groups and Port Channels", "cmd": "Channel Groups and Port Channels", "desc": "A port channel is a communication link between two switches supported by matching channel group interfaces on each switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Port Channel Subinterfaces", "cmd": "Port Channel Subinterfaces", "desc": "Port channel subinterfaces divide a single port channel interface into multiple logical L3 interfaces based on the 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Port Channel Mirroring", "cmd": "Port Channel Mirroring", "desc": "EOS supports Port Channels as mirroring destinations for both ingress and egress source directions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Port Channel Configuration Procedures", "cmd": "Port Channel Configuration Procedures", "desc": "These sections describe channel group and port channel configuration procedures: • Configuring a Channel Group • Configuring a Port Channel Interface • Configuring Port Channel Mirroring • Maximum Port Channel ID Increase" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Dynamic and Symmetric LAG Hashing", "cmd": "load-balance policies", "desc": "Dynamic LAG hashing enables high link utilization and highly even distribution among LAG members by employing a randomized hashing algorithm." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Default Load Balance Profile", "cmd": "port-channel load-balance fm6000 fields ip ip-tcp-udp-header", "desc": "Two commands configure the load balance default profile on 7150 Series switches: • port-channel load-balance fm6000 fields ip controls the hash algorithm for IP packets by specifying the algorithm’s use of IP and MAC header fields." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Port Channel and LACP Configuration Commands", "cmd": "Port Channel and LACP Configuration Commands", "desc": "Global Port Channel and LACP Configuration Commands • interface port-channel • lacp system-priority Interface Configuration Commands – Ethernet Interface • channel-group • lacp port-priority • lacp timer" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "channel-group", "cmd": "channel-group number mode group_mode\nno channel-group\ndefault channel-group", "desc": "The channel-group command assigns the configuration mode Ethernet interfaces to a channel group, creates the group if it does not already exist, and sets the port-channel mode for the group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "distribution random", "cmd": "distribution random BALANCE_TYPE\nno distribution random\ndefault distribution random", "desc": "The distribution random command specifies the random distribution of data packets handled by the hash algorithm defined by the configuration mode load balance profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "distribution symmetric-hash", "cmd": "distribution symmetric-hash FIELD_TYPE\nno distribution symmetric-hash\ndefault distribution symmetric-hash", "desc": "The distribution symmetric-hash command enforces traffic symmetry on data distributed by the hash algorithm defined by the configuration mode load balance profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "fields ip", "cmd": "fields ip IP_FIELD\nno fields ip\ndefault fields ip", "desc": "The fields ip command specifies the L3/L4 data fields used by the hash algorithm defined by the configuration mode load balance profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "fields mac", "cmd": "fields mac MAC_FIELD\nno fields mac\ndefault fields mac", "desc": "The fields mac command specifies the L2 data fields used by the hash algorithm defined by the configuration mode load balance profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "hash-seed", "cmd": "hash-seed number\nno hash-seed number\ndefault hash-seed number", "desc": "The hash-seed command specifies the seed used by the hash algorithm defined by the configuration mode load balance profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "ingress load-balance profile", "cmd": "ingress load-balance profile profile_name\nno ingress load-balance profile\ndefault ingress load-balance profile", "desc": "The ingress load-balance profile command applies the specified load-balance profile to the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "interface port-channel", "cmd": "interface port-channel p_range\nno interface port-channel p_range\ndefault interface port-channel p_range", "desc": "The interface port-channel command places the switch in port-channel interface configuration mode for modifying parameters of specified link aggregation (LAG) interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "lacp port-priority", "cmd": "lacp port-priority priority_value\nno lacp port-priority\ndefault lacp port-priority", "desc": "The lacp port-priority command sets the aggregating port priority for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "lacp system-priority", "cmd": "lacp system-priority priority_value\nno lacp system-priority\ndefault lacp system-priority", "desc": "The lacp system-priority command configures the switch’s LACP system priority." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "lacp timer", "cmd": "lacp timer RATE_LEVEL\nno lacp timer\ndefault lacp timer", "desc": "The lacp timer command configures the LACP reception interval on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "load-balance fm6000 profile", "cmd": "load-balance fm6000 profile profile_name\nno load-balance fm6000 profile profile_name\ndefault load-balance fm6000 profile profile_name", "desc": "The load-balance fm6000 profile command places the switch in load-balance-profile configuration mode to configure a specified load balance profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "load-balance sand profile (7500E/7500R)", "cmd": "load-balance sand profile profile_name\nno load-balance sand profile profile_name", "desc": "The load-balance sand profile command configures a load-balance profile on a sand module switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "monitor session destination", "cmd": "monitor session session_name destination Port-Channel interface_number", "desc": "The monitor session destination configures Port Channel interfaces as a mirroring destination for both ingress and egress traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor session source", "cmd": "monitor session session_name source interface_number", "desc": "The monitor session source configures Port Channel interfaces as a mirroring source for both ingress and egress traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel hash-seed", "cmd": "port-channel hash-seed number\nno port-channel hash-seed\ndefault port-channel hash-seed", "desc": "The port-channel hash-seed command specifies the seed used by the hash algorithm defined by the configuration mode load balance profile when distributing the load across ports comprising a port channel." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel lacp fallback", "cmd": "port-channel lacp fallback [MODE]\nno port-channel lacp fallback\ndefault port-channel lacp fallback", "desc": "The port-channel lacp fallback command enables the LACP fallback mode on the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel lacp fallback timeout", "cmd": "port-channel lacp fallback timeout period\nno port-channel lacp fallback timeout\ndefault port-channel lacp fallback timeout", "desc": "The port-channel lacp fallback timeout command specifies the fallback timeout period for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel load-balance", "cmd": "port-channel load-balance platform { hash_seed | fields ip fields | hash hash_function }\nno port-channel load-balance platform [ hash_seed ]\ndefault port-channel load-balance platform [ hash_seed ]", "desc": "The port-channel load-balance command specifies the seed in the hashing algorithm that balances the load across ports comprising a port channel." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel load-balance arad fields ip", "cmd": "port-channel load-balance arad fields ip IP_FIELD_NAME\nno port-channel load-balance arad fields ip\ndefault port-channel load-balance arad fields ip", "desc": "The port-channel load-balance arad fields ip command specifies the data fields that the port channel load balance hash algorithm uses for distributing IP packets on Arad platform switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel load-balance fm6000 fields ip", "cmd": "port-channel load-balance fm6000 fields ip IP_FIELD_NAME\nno port-channel load-balance fm6000 fields ip\ndefault port-channel load-balance fm6000 fields ip", "desc": "The port-channel load-balance fm6000 fields ip command specifies the data fields that the port channel load balance hash algorithm uses for distributing IP packets on FM6000 platform switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel load-balance fm6000 fields mac", "cmd": "port-channel load-balance fm6000 fields mac MAC_FIELD_NAME\nno port-channel load-balance fm6000 fields mac\ndefault port-channel load-balance fm6000 fields mac", "desc": "The port-channel load-balance fm6000 fields mac command specifies data fields that configure the port channel load balance hash algorithm for non-IP packets on FM6000 platform switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel load-balance module", "cmd": "port-channel load-balance module LINECARD_RANGE sand profile PROFILE_NAME\nno port-channel load-balance module LINECARD_RANGE sand profile PROFILE_NAME\ndefault port-channel load-balance module LINECARD_RANGE sand profile PROFILE_NAME", "desc": "The port-channel load-balance module command assigns a named load-balancing profile to a linecard." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel load-balance petraA fields ip", "cmd": "port-channel load-balance petraA fields ip IP_FIELD_NAME\nno port-channel load-balance petraA fields ip\ndefault port-channel load-balance petraA fields ip", "desc": "The port-channel load-balance petraA fields ip command specifies the data fields that the port channel load balance hash algorithm uses for distributing IP packets on Petra platform switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel load-balance sand profile (7500E/7500R)", "cmd": "port-channel load-balance sand profile profile_name\nno port-channel load-balance sand profile profile_name", "desc": "The port-channel load-balance sand profile command configures a global LAG hashing profile on the port channel interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel load-balance trident fields ip", "cmd": "port-channel load-balance trident fields ip IP_FIELD_NAME\nno port-channel load-balance trident fields ip\ndefault port-channel load-balance trident fields ip\ndefault port-channel load-balance trident fields ip ingress-interface disabled", "desc": "The port-channel load-balance trident fields ip command specifies the data fields that the port channel load balance hash algorithm uses for distributing IP packets on Trident platform switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel load-balance trident fields ipv6", "cmd": "port-channel load-balance trident fields ipv6 IP_FIELD_NAME\nno port-channel load-balance trident fields ipv6\ndefault port-channel load-balance trident fields ipv6", "desc": "The port-channel load-balance trident fields ipv6 command specifies the data fields that the port channel load balance hash algorithm uses for distributing IPv6 packets on Trident platform switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel load-balance trident fields mac", "cmd": "port-channel load-balance trident fields mac MAC_FIELD_NAME\nno port-channel load-balance trident fields mac\ndefault port-channel load-balance trident fields mac\ndefault port-channel load-balance trident fields mac ingress-interface disabled", "desc": "The port-channel load-balance trident fields mac command specifies data fields that the port channel load balance hash algorithm uses for distributing non-IP packets on Trident platform switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel min-links", "cmd": "port-channel min-links quantity\nno port-channel min-links\ndefault port-channel min-links", "desc": "The port-channel min-links command specifies the minimum number of interfaces that the configuration mode LAG requires to become active." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel min-links review interval", "cmd": "port-channel min-links review interval timeout (seconds)\nno port-channel min-links review interval\ndefault port-channel min-links review interval\nsetting the review interval to zero, the command has the following effect:\ninterfaces ready to join the port-channel. Meanwhile, the partner can enable the port-channel link with\nfewer than required member interfaces. This configuration does not impact port-channels without minlinks configuration.", "desc": "The port-channel min-links review interval command enables or disables timer based minlinks review feature for all port-channels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel speed mixed", "cmd": "port-channel speed mixed", "desc": "The port-channel speed mixed command configures a port channel with the ability to have active members of multiple speeds." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "port-channel speed minimum", "cmd": "port-channel speed minimum speed-value", "desc": "The port-channel speed minimum command specifies the cumulative minimum speed of all active members in order for a port channel to become active." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show lacp aggregates", "cmd": "show lacp [PORT_LIST] aggregates [PORT_LEVEL] [INFO_LEVEL]", "desc": "The show lacp aggregates command displays aggregate IDs and the list of bundled ports for all specified port channels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show lacp counters", "cmd": "show lacp [PORT_LIST] counters [PORT_LEVEL] [INFO_LEVEL]\nthe command.", "desc": "The show lacp counters command displays LACP traffic statistics." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show lacp interface", "cmd": "show lacp interface [INTERFACE_PORT] [PORT_LEVEL] [INFO_LEVEL]", "desc": "The show lacp interface command displays port status for all port channels that include the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show lacp internal", "cmd": "show lacp [PORT_LIST] internal [PORT_LEVEL] [INFO_LEVEL]", "desc": "The show lacp internal command displays the local LACP state for all specified channels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show lacp peer", "cmd": "show lacp [PORT_LIST] peer [PORT_LEVEL] [INFO_LEVEL]", "desc": "The show lacp peer command displays the LACP protocol state of the remote neighbor for all specified port channels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show lacp sys-id", "cmd": "show lacp sys-id [INFO_LEVEL]", "desc": "The show lacp sys-id command displays the System Identifier the switch uses when negotiating remote LACP implementations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "representation: 8000,00-1c-73-04-36-d7", "cmd": "representation: 8000,00-1c-73-04-36-d7", "desc": "Conditional UDP Payload Hashing" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show load-balance profile", "cmd": "show load-balance profile [PROFILES]", "desc": "The show load-balance profile command displays the contents of the specified load balance profiles." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show port-channel", "cmd": "show port-channel [MEMBERS] [PORT_LIST] [INFO_LEVEL]", "desc": "The show port-channel command displays information about members the specified port channels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show port-channel dense", "cmd": "show port-channel dense", "desc": "The show port-channel dense command displays the port-channels on the switch and lists their component interfaces, LACP status, and set flags." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show port-channel limits", "cmd": "show port-channel limits", "desc": "The show port-channel limits command displays groups of ports that are compatible and may be joined into port channels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show port-channel load-balance fields", "cmd": "show port-channel load-balance HARDWARE fields", "desc": "The show port-channel load-balance fields command displays the fields that the hashing algorithm uses to distribute traffic across the interfaces that comprise the port channels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show port-channel load-balance", "cmd": "show port-channel load-balance [MEMBERS]", "desc": "The show port-channel load-balance command displays the traffic distribution between the member ports of the specified port channels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "MLAG Introduction", "cmd": "MLAG Introduction", "desc": "High availability data center topologies typically provide redundancy protection at the expense of oversubscription by connecting Top-Of-Rack (TOR) switches and servers to dual aggregation switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "MLAG Conceptual Overview", "cmd": "MLAG Conceptual Overview", "desc": "Multi-Chassis Link Aggregation" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "MLAG Operation Process", "cmd": "MLAG Operation Process", "desc": "A Multi-chassis Link Aggregation Group (MLAG) is a pair of links that terminate on two cooperating switches and appear as an ordinary Link Aggregation Group (LAG)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "MLAG Interoperability with Other Features", "cmd": "MLAG Interoperability with Other Features", "desc": "The following sections describe MLAG interaction with other switch features." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "LACP", "cmd": "LACP", "desc": "Link Aggregation Control Protocol (LACP) should be used on all MLAG interfaces, including the peer-link." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Static MAC Addresses", "cmd": "Static MAC Addresses", "desc": "A static MAC address configured on an MLAG interface is automatically configured on the peer’s corresponding interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Spanning Tree Protocol (STP)", "cmd": "Spanning Tree Protocol (STP)", "desc": "When implementing MLAG in a spanning tree network, spanning tree must be configured globally and on port-channels configured with an MLAG ID." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Port Mirroring", "cmd": "Port Mirroring", "desc": "A port channel which is a member of an MLAG must not be used as the destination port for a port mirroring (port monitoring) session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "IPv6 Flow Label Hashing", "cmd": "IPv6 Flow Label Hashing", "desc": "Arista switches use the hashing algorithm to load-balance traffic among LAG members and Layer 3 ECMP (equal cost multipath) paths." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "MLAG Maintenance", "cmd": "MLAG Maintenance", "desc": "These sections describe tasks required for MLAG to operate on the switch: • Ensuring Control Plane ACL Compatibility • MLAG Availability through a Single Functional Peer • Upgrading MLAG Peers • Forced Periodic ARP and NDP Refresh on IPv4 and IPv6 Ne…" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "MLAG Availability through a Single Functional Peer", "cmd": "MLAG Availability through a Single Functional Peer", "desc": "MLAG high availability advantages are fully realized when all devices that connect to one MLAG switch also connect to the peer switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Reload Delay", "cmd": "Reload Delay", "desc": "If an MLAG peer reboots, all ports except those in the peer-link port-channel remain in errdisabled state for a specified time, called the reload-delay period." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "MLAG Configuration Mode", "cmd": "mlag configuration", "desc": "Peer connection parameters are configured in MLAG-configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Peer Address", "cmd": "peer-address 10.0.0.2", "desc": "The peer address is the destination address on the peer switch for MLAG control traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "Peer Link", "cmd": "peer-link port-channel 10", "desc": "An MLAG is formed by connecting two switches through an interface called a peer link." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Reload Delay Period", "cmd": "reload-delay 150", "desc": "The reload delay period specifies the interval that non-peer links are disabled after an MLAG peer reboots." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Shutdown", "cmd": "shutdown", "desc": "The shutdown (MLAG) command disables MLAG operations without disrupting the MLAG configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN - MLAG Single-homed Hosts", "cmd": "EVPN - MLAG Single-homed Hosts", "desc": "Add a local VTEP to each MLAG peer for the control plane to advertise singly connected hosts directly behind a specific local VTEP-MLAG peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "MLAG Implementation Example", "cmd": "MLAG Implementation Example", "desc": "This example creates an MLAG Domain, then configures MLAG connections between the peer switches and four Network Attached Devices (NADs)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show mlag interfaces states", "cmd": "show mlag interfaces [MLAGS] states [ STATE_NAMES][INFO_LEVEL]", "desc": "The show mlag interfaces states command displays information about the Multi-chassis Link AGgregation (MLAG) states on bridged Ethernet interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show mlag interfaces", "cmd": "show mlag interfaces [MLAGS][INFO_LEVEL]", "desc": "The show mlag interfaces command displays information about the Multi-chassis Link AGgregation (MLAG) configuration on bridged Ethernet interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show mlag issu warnings", "cmd": "show mlag issu warnings", "desc": "The show mlag issu warnings command displays a warning message regarding the backwardcompatibility of this feature before you upgrade." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show mlag subinterfaces", "cmd": "show mlag subinterfaces", "desc": "The show mlag subinterfaces command displays information about MLAG Layer 2 subinterfaces configured on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "sec Max Age 20 sec Forward Delay 15 sec", "cmd": "sec Max Age 20 sec Forward Delay 15 sec", "desc": "Interface Role State Cost Prio." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "po.ra.ar.mg.172.17.254.64/29", "cmd": "po.ra.ar.mg.172.17.254.64/29", "desc": "active MLAG Commands Global MLAG Commands • mlag configuration (global configuration) MLAG Interface Configuration Commands • mlag (port-channel interface configuration) MLAG Configuration Commands • arp aging refresh always" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "arp aging refresh always", "cmd": "arp aging refresh always\nno arp aging refresh always\ndefault arp aging refresh always", "desc": "The arp aging refresh always command enables the switch to send forced periodic ARP requests for an MLAG configuration in an IPv4 network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "domain-id", "cmd": "domain-id identifier\nno domain-id\ndefault domain-id", "desc": "The domain-id command specifies a name for the Multi-chassis Link AGgregation (MLAG) domain." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "dual-primary detection delay", "cmd": "dual-primary detection delay seconds [action erridisable all-interfaces]\nno dual-primary detection delay seconds [action erridisable all-interfaces]\ndefault dual-primary detection delay seconds [action erridisable all-interfaces]", "desc": "Use the dual-primary detection delay command to configure a dual primary detection delay with an optional action to errdisable all interfaces on secondary MLAG peer after a dual primary condition is detected." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "dual-primary recovery delay", "cmd": "dual-primary recovery delay mlag seconds non-mlag seconds\nno dual-primary recovery delay mlag seconds non-mlag seconds\ndefault dual-primary recovery delay mlag seconds non-mlag seconds", "desc": "Use the dual-primary recovery delay command to configure dual-primary detection recovery-delay for MLAG interfaces and non-MLAG interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "heartbeat-interval (MLAG)", "cmd": "heartbeat-interval period\nno heartbeat-interval\ndefault heartbeat-interval", "desc": "The heartbeat-interval command configures the interval at which heartbeat messages are issued in a Multi-chassis Link AGgregation (MLAG) configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "inactive forwarding peer-link restricted", "cmd": "inactive forwarding peer-link restricted [disabled]\nno inactive forwarding peer-link restricted [disabled]\ndefault inactive forwarding peer-link restricted [disabled]", "desc": "The inactive forwarding peer-link restricted command is used in MLAG configurations to limit traffic forwarding on the MLAG peer-link when the switch is not in a primary or secondary state." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "inactive mac-address destination peer-link", "cmd": "inactive mac-address destination peer-link [direct | indirect]", "desc": "The inactive mac-address destination peer-link remaps all MAC addresses and host routes to the other MLAG peer in the MLAG domain." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "ipv6 nd cache refresh always", "cmd": "ipv6 nd cache refresh always\nno ipv6 nd cache refresh always\ndefault ipv6 nd cache refresh always", "desc": "The ipv6 nd cache refresh always command enables the switch to send forced periodic ARP requests for an MLAG configuration in an IPv6 network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "local-interface", "cmd": "local-interface vlan vlan_number\nno local-interface\ndefault local-interface", "desc": "The local-interface command assigns a VLAN interface for use in Multi-chassis Link AGgregation (MLAG) configurations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "mlag (port-channel interface configuration)", "cmd": "mlag number\nno mlag\ndefault mlag", "desc": "The mlag command assigns an MLAG ID to a port-channel." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "peer-address", "cmd": "peer-address ipv4_addr\nno peer-address\ndefault peer-address", "desc": "The peer-address command specifies the peer IPv4 address for a Multi-chassis Link AGgregation (MLAG) domain." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "peer-address heartbeat", "cmd": "peer-address heartbeat [Peer-IPv4 | Peer-IPv6] [vrf vrf_name]\nno peer-address heartbeat [Peer-IPv4 | Peer-IPv6] [vrf vrf_name]\ndefault peer-address heartbeat [Peer-IPv4 | Peer-IPv6] [vrf vrf_name]", "desc": "The peer-address heartbeat command causes the MLAG agent to start using Peer-IP address in the given VRF for UDP-based heartbeat control messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "peer-link", "cmd": "peer-link INT_NAME\nno peer-link\ndefault peer-link", "desc": "The peer-link command specifies the interface that connects Multi-chassis Link AGgregation (MLAG) peers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "reload-delay mlag", "cmd": "reload-delay [mlag] PERIOD\nno reload-delay [mlag]\ndefault reload-delay [mlag]", "desc": "The reload-delay mlag command configures the reload delay period for MLAG links." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "reload-delay mode", "cmd": "reload-delay mode lacp standby\nno reload-delay mode\ndefault reload-delay mode", "desc": "The reload-delay mode command specifies the state of LACP LAG ports during the MLAG reload delay period." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "reload-delay non-mlag", "cmd": "reload-delay non-mlag PERIOD\nno reload-delay non-mlag\ndefault reload-delay non-mlag", "desc": "The reload-delay non-mlag command specifies the period that non-MLAG links are disabled after an MLAG peer reboots." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show mlag", "cmd": "show mlag [INFO_LEVEL]", "desc": "The show mlag command displays information about the Multi-chassis Link AGgregation (MLAG) configuration on bridged Ethernet interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "ar.mg.mlag", "cmd": "ar.mg.mlag", "desc": "Vlan3901" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Static Routing", "cmd": "Static Routing", "desc": "Static routes are entered through the CLI and are typically used when dynamic protocols are unable to establish routes to a specified destination prefix." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Dynamic Routing", "cmd": "Dynamic Routing", "desc": "Dynamic routes are established by dynamic routing protocols." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Static MAC Address Table Entries", "cmd": "mac address-table static 0012.3694.03ec vlan 3 interface Ethernet", "desc": "The MAC address table accepts static MAC addresses, including multicast entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "STATIC", "cmd": "STATIC", "desc": "Po10 Po12 Total Mac Addresses for this criterion: 1 switch(config)# Configuring a Delay for Flushing MAC Addresses Configure a delay for flushing MAC addresses when the network interface goes down and reduce" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Dynamic MAC Address Table Entries", "cmd": "interface ethernet 8", "desc": "Learning Mode The switch maintains a MAC address table for switching frames efficiently between VLAN ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Port Mirroring Capacity", "cmd": "Port Mirroring Capacity", "desc": "Port mirroring capacity varies by platform." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "MAC Security", "cmd": "interface ethernet 7", "desc": "MAC security restricts input to a switched port by limiting the number of MAC addresses that can access the port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Interface Link Flap Monitor", "cmd": "monitor link-flap policy", "desc": "An interface is monitored for link flap errors with link flap profiles." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "ad:3e:5f:dd:64:cf", "cmd": "ad:3e:5f:dd:64:cf", "desc": "Displaying RAIL Status" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor session", "cmd": "show monitor session SESSION_NAME", "desc": "The show monitor session command displays the configuration of the specified port mirroring session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform trident mirroring", "cmd": "show platform trident mirroring [detail | session]", "desc": "The show platform trident mirroring command displays current parameters of all configured mirroring sessions in Trident series platforms." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "show port-security", "cmd": "show port-security", "desc": "The show port-security command displays a summary of MAC address port security configuration and status on each interface where switchport port security is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "show port-security interface", "cmd": "show port-security interface [INT_NAME]", "desc": "The show port-security interface command displays the switchport port-security status of all specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "show port-security mac-address", "cmd": "show port-security mac-address", "desc": "The show port-security mac-address command display static unicast MAC addresses assigned to interfaces where switchport port security is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show storm-control", "cmd": "show storm-control [INT_NAME]", "desc": "The show storm-control command displays the storm-control level and interface inbound packet capacity for the specified interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show switch forwarding-mode", "cmd": "show switch forwarding-mode", "desc": "The show switch forwarding-mode command displays the switch’s current and available forwarding plane hardware modes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show track", "cmd": "show track [OBJECT][INFO_LEVEL]", "desc": "The show track command displays information about tracked objects configured on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "storm-control", "cmd": "storm-control MODE level { threshold_percent | pps threshold }\nno storm-control MODE\ndefault storm-control MODE", "desc": "The storm-control command configures and enables storm control on the configuration mode physical interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "switch forwarding-mode", "cmd": "switch forwarding-mode MODE_SETTING\nno switch forwarding-mode\ndefault switch forwarding-mode", "desc": "The switch forwarding-mode command specifies the mode of the switch's forwarding plane hardware." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "switchport", "cmd": "switchport\nno switchport\ndefault switchport\norder command specifies the method that VLANs are allocated.\nconfigure a routed interface. Any IP-level configuration changes made to a routed interface are maintained\nwhen the interface is toggled to switched port mode.\nthe LAG from its component members.", "desc": "The switchport command places the configuration mode interface in switched port (Layer 2) mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "switchport default mode access", "cmd": "switchport default mode access", "desc": "The switchport default mode access command places the configuration mode interface in switched port default access (Layer 3) mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "switchport default mode routed", "cmd": "switchport default mode routed", "desc": "The switchport default mode routed command places the configuration mode interface in switched port default routed (Layer 3) mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "switchport mac address learning", "cmd": "switchport mac address learning\nno switchport mac address learning\ndefault switchport mac address learning", "desc": "The switchport mac address learning command enables MAC address learning for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "switchport port-security", "cmd": "switchport port-security\nno switchport port-security\ndefault switchport port-security", "desc": "The switchport port-security command enables MAC address port security on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "switchport port-security mac-address maximum", "cmd": "switchport port-security mac-address maximum max_addr\nno switchport port-security mac-address maximum\ndefault switchport port-security mac-address maximum", "desc": "The switchport port-security mac-address maximum command specifies the maximum MAC address limit for the configuration mode interface when configured as a secure port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "switchport port-security violation", "cmd": "switchport port-security violation {protect [log]| shutdown}\nno switchport port-security violation protect log\ndefault switchport port-security violation protect log", "desc": "The switchport port-security violation command configures port security in protect mode (with the option of enabling logging) or the shutdown mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "system control-plane", "cmd": "system control-plane\nip access-group (Control Plane mode)", "desc": "The system control-plane command places the switch in control-plane configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "track", "cmd": "track object_name interface INTERFACE_NAME PROPERTY\nno track object_name\ndefault track object_name", "desc": "The track command creates an object whose state changes to provide information to a client process." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "traffic-loopback", "cmd": "traffic-loopback source [system|network] device [phy|mac]\nno traffic-loopback", "desc": "The traffic-loopback command is used to create loopbacks to verify the functionality of interfaces and partner links." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "clear counters", "cmd": "clear counters [INTERFACE][SCOPE]", "desc": "The clear counters command resets the counters to zero for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "clear mac address-table dynamic", "cmd": "clear mac address-table dynamic [VLANS][INTERFACE]", "desc": "The clear mac address-table dynamic command removes specified dynamic entries from the MAC address table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "clear server-failure servers inactive", "cmd": "clear server-failure servers inactive", "desc": "The clear server-failure servers inactive command removes all inactive server entries from the server failed history list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "default-profiles", "cmd": "default-profiles [LF_PROFILES]\nno default-profiles\ndefault default-profiles", "desc": "The default-profiles command specifies the set of link-flap profiles that define error-disable criteria for interfaces where link flap monitoring is enabled without a link flap profile assignment." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "description", "cmd": "description label_text\nno description\ndefault description", "desc": "The description command adds comment text for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "errdisable detect cause link-change", "cmd": "errdisable detect cause link-change\nno errdisable detect cause link-change\ndefault errdisable detect cause link-change", "desc": "The errdisable detect cause link-change command enables the error-disabling of Ethernet interfaces when the switch detects a link flap error on the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "errdisable flap-setting cause link-flap", "cmd": "errdisable flap-setting cause link-flap max-flaps quantity time period\nno errdisable flap-setting cause link-flap\ndefault errdisable flap-setting cause link-flap", "desc": "The errdisable flap-setting cause link-flap command configures the link-flap frequency that defines an link-flap error on an Ethernet interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "errdisable recovery cause", "cmd": "errdisable recovery cause CONDITION\nno errdisable recovery cause CONDITION\ndefault errdisable recovery cause CONDITION", "desc": "The errdisable recovery cause command enables the automated recovery of error-disabled Ethernet interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "errdisable recovery interval", "cmd": "errdisable recovery interval period\nno errdisable recovery interval\ndefault errdisable recovery interval", "desc": "The errdisable recovery interval command specifies the period that an error-disabled Ethernet interface remains disabled before automated errdisable recovery begins." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "interface loopback", "cmd": "interface loopback l_range\nno interface loopback l_range\ndefault interface loopback l_range", "desc": "The interface loopback command places the switch in loopback interface configuration mode for the specified interface and creates a loopback interface if one does not exist." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "ip access-group (Control Plane mode)", "cmd": "ip access-group list_name [VRF_INSTANCE] DIRECTION\nno ip access-group [list_name][VRF_INSTANCE] DIRECTION\ndefault ip access-group [list_name][VRF_INSTANCE] DIRECTION", "desc": "The ip access-group command applies an IPv4 or standard IPv4 Access Control List (ACL) to the control plane." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "link tracking group (interface)", "cmd": "link tracking group group_name DIRECTION\nno link tracking group [group_name]\ndefault link tracking group [group_name]", "desc": "The link tracking group command adds the configuration mode interface to a link-state group and specifies whether it is upstream or downstream." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "link tracking group", "cmd": "link tracking group group_name\nno link tracking group group_name\ndefault link tracking group group_name", "desc": "The link tracking group command creates and enables a link-state group and places the switch in link-state-group configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "links minimum", "cmd": "links minimum quantity\nno links minimum\ndefault links minimum", "desc": "The links minimum command specifies the minimum number of links the configuration mode link-state group requires." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "load-interval", "cmd": "load-interval delay\nno load-interval\ndefault load-interval", "desc": "The load-interval command changes the load interval for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "mac address learning", "cmd": "mac address learning local limit\nno mac address learning local limit\ndefault mac address learning local limit", "desc": "The mac address learning command enables MAC address learning on a VLAN configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "mac address-table aging-time", "cmd": "mac-address-table aging-time period\nno mac-address-table aging-time\ndefault mac-address-table aging-time", "desc": "The mac address-table aging-time command configures the aging time for MAC address table dynamic entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "mac address-table flushing", "cmd": "mac address-table flushing event link-down delay seconds", "desc": "The mac address-table flushing command configures a delay timer for flushing MAC addresses from the forwarding table when a link goes down." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "mac address-table static", "cmd": "mac address-table static mac_address vlan v_num [DESTINATION]\nno mac address-table static mac_address vlan v_num [DESTINATION]\ndefault mac address-table static mac_address vlan v_num [DESTINATION]", "desc": "The mac address-table static command adds a static entry to the MAC address table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "monitor link-flap profiles", "cmd": "monitor link-flap [LF_PROFILES]\nno monitor link-flap\ndefault monitor link-flap", "desc": "The monitor link-flap profiles command enables link-flap monitoring on the configuration mode interface and specifies the error-disable criteria for the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor server-failure link", "cmd": "monitor server-failure link\nno monitor server-failure link\ndefault monitor server-failure link", "desc": "The monitor server-failure link command enables Rapid Automated Indication of Link-loss (RAIL) on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor server-failure", "cmd": "monitor server-failure\nno monitor server-failure\ndefault monitor server-failure", "desc": "The monitor server-failure command places the switch in server-failure configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "monitor session destination cpu", "cmd": "monitor session session_name destination cpu\nno monitor session session_name destination cpu\ndefault monitor session session_name destination cpu", "desc": "The monitor session destination cpu command configures the CPU as the destination port of a specified port mirroring session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "monitor session destination", "cmd": "monitor session session_name destination{cpu | ethernet e_range | port-channel p_range | tunnel\nno monitor session session_name destination\ndefault monitor session session_name destination", "desc": "The monitor session destination command configures an interface as the destination port of a specified port mirroring session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "destination 2.2.2.2", "cmd": "destination 2.2.2.2", "desc": "switch(config)# show monitor session Session redirect_2 -----------------------Source Ports: Destination Ports: Gre1 : status active source" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "dest", "cmd": "dest", "desc": "TTL" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "monitor session forwarding-drop", "cmd": "monitor session session_name forwarding-drop destination tunnel mode\nno monitor session session_name forwarding-drop destination tunnel mode\ndefault monitor session session_name forwarding-drop destination tunnel mode", "desc": "The monitor session forwarding-drop command configures a forwarding-drop session for mirroring ingress packets that are dropped during ASIC forwarding." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "monitor session ip access-group", "cmd": "monitor session session_name ip access-group acl_name\nno monitor session session_name ip access-group\ndefault monitor session session_name ip access-group", "desc": "The monitor session ip access-group command configures an ACL to filter the traffic being mirrored to the destination port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor session source", "cmd": "monitor session session_name source INT_NAME DIRECTION\nno monitor session session_name source INT_NAME DIRECTION\ndefault monitor session session_name source INT_NAME DIRECTION", "desc": "The monitor session source command configures the source port of a specified port mirroring session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "monitor session source ip access-group", "cmd": "monitor session s_name source INT_NAME [DIRECT] ip access-group acl_name\nno monitor session s_name source INT_NAME [DIRECT] ip access-group acl_name\ndefault monitor session s_name source INT_NAME [DIRECT] ip access-group acl_name", "desc": "The monitor session source ip access-group command configures an ACL to filter the traffic being mirrored from a specific source port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor session truncate", "cmd": "monitor session session_name truncate\nno monitor session session_name truncate\ndefault monitor session session_name truncate", "desc": "The monitor session truncate command configures a port mirroring session to truncate mirrored packets, retaining only the first 160 bytes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "mtu", "cmd": "mtu bytes\nno mtu\ndefault mtu", "desc": "The mtu command configures the IPv4 and IPv6 Maximum Transmission Unit (MTU) size for the Interface Configuration Mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "network (server-failure configuration mode)", "cmd": "network netv4_address\nno network netv4_address\ndefault network netv4_address", "desc": "The network command specifies the IPv4 network space that Rapid Automated Indication of Link-loss (RAIL) monitors for failed links to connected servers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "no monitor session", "cmd": "no monitor session session_name\ndefault monitor session session_name", "desc": "The no monitor session and default monitor session commands remove the specified monitor session from the switch by deleting all corresponding monitor commands from running-config." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "phy diag", "cmd": "phy diag [transmitter | receiver] test pattern TestPattern\nno phy diag [transmitter | receiver] test pattern TestPattern\ndefault phy diag [transmitter | receiver] test pattern TestPattern", "desc": "Use the phy diag command to configure a test pattern in the interface configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "platform sand monitor serdes error log", "cmd": "platform sand monitor serdes error log", "desc": "The platform sand monitor serdes error log command is used for enabling the serdes error log for fabric link monitoring." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "platform sand monitor serdes error threshold", "cmd": "platform sand monitor serdes error threshold", "desc": "The platform sand monitor serdes error threshold command is used for generating a fabric link monitoring serdes error threshold." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "platform sand monitor serdes poll period", "cmd": "platform sand monitor serdes poll period", "desc": "The platform sand monitor serdes poll period command is used to enable the serdes poll period." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "platform sand monitor serdes poll threshold isolation", "cmd": "platform sand monitor serdes poll threshold isolation", "desc": "The platform sand monitor serdes poll threshold isolation command is used to set and enables fabric link monitoring for serdes poll threshold isolation." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "platform sand monitor serdes poll threshold recovery", "cmd": "platform sand monitor serdes poll threshold recovery", "desc": "The platform sand monitor serdes poll threshold recovery command is used to set and enable fabric link monitoring for serdes poll threshold recovery." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "profile max-flaps (Link Flap Configuration)", "cmd": "profile PROFILE_NAME max-flaps flap_max time period [EXTENSIONS]\nno profile LF_PROFILE", "desc": "The profile max-flaps command creates a link flap profile that, when assigned to an Ethernet interface, specifies the conditions that result in an error-disable action." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "proxy (server-failure configuration mode)", "cmd": "proxy [lifetime time_span]\nno proxy [lifetime]\ndefault proxy [lifetime]", "desc": "The proxy command enables the Rapid Automated Indication of Link-loss (RAIL) proxy setting and specifies the interval that RAIL responds to messages sent to servers on failed links, starting from when the switch" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show bridge mac-address-table aging timeout", "cmd": "show bridge mac-address-table aging timeout", "desc": "The show bridge mac-address-table aging timeout command displays the aging time for MAC address table dynamic entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show fabric monitoring health", "cmd": "platform sand monitor health", "desc": "The platform sand monitor health command is used to display the fabric monitoring connected state status with isolated links." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces", "cmd": "show interfaces [INT_NAME]", "desc": "The show interfaces command displays operational status and configuration information of specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces description", "cmd": "show interfaces [INT_NAME] description", "desc": "The show interfaces description command displays the status and description text of the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces phy diag", "cmd": "show interfaces [interface type interface range] phy diag [error-correction | test pattern]", "desc": "• interface type interface range Type of interface and range." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show link tracking group", "cmd": "show link tracking group [DATA_LEVEL][GROUPS]", "desc": "The show link tracking group command displays information about a specified link-state group or about all groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show mac address-table", "cmd": "show mac address-table [ENTRY_TYPE][MAC_ADDR][INTF_1 ... INTF_N][VLANS]", "desc": "The show mac-address-table command displays the specified MAC address table entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show mac address-table count", "cmd": "show mac address-table count [VLANS]", "desc": "The show mac-address-table count command displays the number of entries in the MAC address table for the specified VLAN or for all VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show mac address-table mlag-peer", "cmd": "show mac address-table mlag-peer [ENTRY_TYPE][MAC_ADDR][INTF_1 ... INTF_N][VLANS]", "desc": "The show mac-address-table mlag-peer command displays the specified MAC address table entries learned from the MLAG peer switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show mac address-table multicast", "cmd": "show mac address-table multicast [MAC_ADDR][INTF][VLANS]", "desc": "The show mac-address-table command displays the specified multicast MAC address table entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show mac address-table multicast brief", "cmd": "show mac address-table multicast [VLANS] brief", "desc": "The show mac-address-table command displays a summary of multicast MAC address table entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor server-failure", "cmd": "show monitor server-failure", "desc": "The show monitor server-failure command displays Rapid Automated Indication of Link-loss (RAIL) configuration settings and the number of servers on each monitored network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor server-failure history", "cmd": "show monitor server-failure history", "desc": "The show monitor server-failure history command displays the time of all link failures detected by Rapid Automated Indication of Link-loss (RAIL) and includes the interface name for each failure." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor server-failure servers", "cmd": "show monitor server-failure servers [SERVER_LIST]", "desc": "The show monitor server-failure servers command displays status and configuration information about each server that RAIL is monitoring." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Interface Name With Feature", "cmd": "Interface Name With Feature", "desc": "Interface Name Without Feature Supported Speeds with Feature Default Speed Ethernetx/1 Ethernetx/1 400G-8, 200G-4, 100G-2, 100G-4 400G-8 Nonexistent Ethernetx/2 N/A N/A Ethernetx/2 Ethernetx/3 100G-2 100G-2" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "boot port numbering octal interfaces 4", "cmd": "boot port numbering octal interfaces 4\nno boot port numbering octal interfaces 4", "desc": "The boot port numbering octal interfaces 4 command configures a chassis to octal port renumbering with four interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "system l1 module", "cmd": "system l1 module linecard linecard_name switch switch_name", "desc": "The system l1 module command enters the configuration mode for Layer 1 parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "system l1 module profile", "cmd": "system l1 module module_name profile profile_name", "desc": "The system l1 module profile command configures Layer 1 module profiles on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "system l1 unsupported", "cmd": "system l1 unsupported [error-correction | speed] action [error | warn]", "desc": "The system l1 unsupported command enters the configuration mode for Layer 1 parameters and configures the response to unsupported L1 configurations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show l1 modules profile status", "cmd": "show l1 modules profile status", "desc": "The show l1 modules profile status command displays the status of configured Layer 1 profiles on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Spanning Tree Protocol", "cmd": "Spanning Tree Protocol", "desc": "Spanning Tree Protocols prevent bridging loops in Layer 2 Ethernet networks." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Spanning Tree Overview", "cmd": "Spanning Tree Overview", "desc": "An Ethernet network functions properly when only one active path exists between any two stations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Spanning Tree Protocol Versions", "cmd": "Spanning Tree Protocol Versions", "desc": "STP versions supported by Arista switches address two limitations of the original Spanning Tree protocol that was standardized as IEEE 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Switchport Interface Pairs", "cmd": "Switchport Interface Pairs", "desc": "Switchport interface pairs associate two interfaces in a primary-backup configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "Port Roles", "cmd": "Port Roles", "desc": "Messages from connected devices to the root bridge traverse a least-cost path, which has the smallest cost among all possible paths to the root bridge." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "Port Activity States", "cmd": "Port Activity States", "desc": "A ports activity state defines its current STP activity level." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "Port Types", "cmd": "Port Types", "desc": "Port type is a configurable parameter that reflects the type of network segment that is connected to the port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "Switchport Backup Mode", "cmd": "spanning-tree mode backup", "desc": "Switchport backup interface pairs are enabled through the spanning-tree mode command with the backup option." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Spanning Tree Instance Configuration", "cmd": "Spanning Tree Instance Configuration", "desc": "A network performs these steps to set up an STP instance: 1." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Port Roles and Rapid Convergence", "cmd": "Port Roles and Rapid Convergence", "desc": "Spanning Tree provides the following options for controlling port configuration and operation: • portfast: Allows ports to skip learning state before entering the forwarding state." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "abort (mst-configuration mode)", "cmd": "abort", "desc": "The abort command, in MST-configuration mode, discards pending changes to the MST region configuration, then returns the switch to global configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "clear spanning-tree counters", "cmd": "clear spanning-tree counters [INT_NAME]", "desc": "The clear spanning-tree counters command resets the BPDU counters for the specified interfaces to zero in all CLI sessions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "clear spanning-tree counters session", "cmd": "clear spanning-tree counters session", "desc": "The clear spanning-tree counter session command resets the BPDU counters to zero on all interfaces in the current CLI session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "clear spanning-tree detected-protocols", "cmd": "clear spanning-tree detected-protocols [INT_NAME]", "desc": "The clear spanning-tree detected-protocols command restarts the Spanning Tree Protocol (STP) migration state machine on the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "disabled-time", "cmd": "disabled-time [period]\nno disabled-time [period]\ndefault disabled-time [period]", "desc": "The disabled-time command sets the time for which the port remains disabled after a loop is detected by loop protection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "instance", "cmd": "instance mst_inst vlans v_range\nno instance mst_inst [vlans v_range]\nno default instance mst_inst [vlans v_range]", "desc": "The instance command inserts an entry into the VLAN-to-instance map that associates a set of VLANs to an MST instance." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "loop-protection", "cmd": "loop-protection\nno loop-protection\ndefault loop-protection", "desc": "The loop-protection command enables loop protection on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor loop-protection", "cmd": "monitor loop-protection", "desc": "The monitor loop-protection command places the switch in loop-protection configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "name (mst-configuration mode)", "cmd": "name label_text\nno name\ndefault name", "desc": "The name command configures the MST region name." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "protect vlan", "cmd": "protect vlan vlan-range", "desc": "The protect vlan command specifies which VLANs participate in loop protection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "rate-limit", "cmd": "rate-limit [frames]\nno rate-limit [frames]\ndefault rate-limit [frames]", "desc": "The rate-limit command sets the maximum number of loop detection frames which can be sent by the switch per second." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "revision (mst-configuration mode)", "cmd": "revision rev_number\nno revision\ndefault revision", "desc": "The revision command configures the MST revision number." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show (mst-configuration mode)", "cmd": "show [EDIT_VERSION]", "desc": "The show command displays the current and pending MST configuration: Exiting MST configuration mode stores all pending configuration changes to running-config." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show loop-protection", "cmd": "show loop-protection [detail]", "desc": "The show loop-protection command displays loop protection status." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree", "cmd": "show spanning-tree [VLAN_ID][INFO_LEVEL]", "desc": "The show spanning-tree command displays Spanning Tree Protocol (STP) data, organized by instance." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree blockedports", "cmd": "show spanning-tree blockedports", "desc": "The show spanning-tree blockedports command displays the list of blocked (discarding) ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree counters", "cmd": "show spanning-tree counters", "desc": "The show spanning-tree counters command displays the number of BPDU transactions on each interface running spanning tree." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree instance", "cmd": "show spanning-tree instance [INFO_LEVEL]", "desc": "The show spanning-tree instance command displays spanning tree protocol bridge configuration settings for each instance on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree mst configuration", "cmd": "show spanning-tree mst configuration [INFO_LEVEL]", "desc": "The show spanning-tree mst configuration command displays information about the MST regions VLAN-to-instance mapping." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree mst interface", "cmd": "show spanning-tree mst [INSTANCE] interface INT_NAME [INFO_LEVEL]", "desc": "The show spanning-tree mst interface command displays Multiple Spanning Tree Protocol (MSTP) information for a specified interface on the specified MST instances." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree mst test information", "cmd": "show spanning-tree mst test information", "desc": "The show spanning-tree mst test information displays diagnostic spanning tree protocol information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree root", "cmd": "show spanning-tree root [INFO_LEVEL]", "desc": "The show spanning-tree root command displays the Bridge-ID, cost to the root bridge, root port, and the root bridge timer settings for all instances." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree topology status", "cmd": "show spanning-tree topology [VLAN_NAME] status [INFO_LEVEL]", "desc": "The show spanning-tree topology status command displays the forwarding state of ports on the specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree transmit active", "cmd": "show spanning-tree transmit active INFO_LEVEL", "desc": "The show spanning-tree transmit active command displays spanning tree protocol bridge assurance information for network ports or for all ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "shutdown (Loop-protection)", "cmd": "shutdown\nno shutdown", "desc": "The shutdown command disables loop protection globally." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree bpdu tx hold-count", "cmd": "spanning-tree bpdu tx hold-count max_bpdu\nno spanning-tree bpdu tx hold-count\ndefault spanning-tree bpdu tx hold-count", "desc": "The spanning-tree bpdu tx hold-count command specifies the maximum number of BPDUs per second that the switch can send from an interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree bpdufilter", "cmd": "spanning-tree bpdufilter FILTER_STATUS\nno spanning-tree bpdufilter\ndefault spanning-tree bpdufilter", "desc": "The spanning-tree bpdufilter command controls bridge protocol data unit (BPDU) filtering on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree bpduguard", "cmd": "spanning-tree bpduguard GUARD_ACTION\nno spanning-tree bpduguard\ndefault spanning-tree bpduguard", "desc": "The spanning-tree bpduguard command controls BPDU Guard on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree bpduguard rate-limit count (global)", "cmd": "spanning-tree bpduguard rate-limit count max_bpdu [interval period]\nno spanning-tree bpduguard rate-limit count\ndefault spanning-tree bpduguard rate-limit count", "desc": "The spanning-tree bpduguard rate-limit count command sets the maximum BPDU reception rate (quantity per interval) for ports that are not covered by a spanning-tree bpduguard rate-limit count (interface) command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree bpduguard rate-limit count (interface)", "cmd": "spanning-tree bpduguard rate-limit count max_bpdu [TIMER]\nno spanning-tree bpduguard rate-limit count\ndefault spanning-tree bpduguard rate-limit count", "desc": "The spanning-tree bpduguard rate-limit count command configures the maximum BPDU reception rate for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree bpduguard rate-limit default", "cmd": "spanning-tree bpduguard rate-limit default\nno spanning-tree bpduguard rate-limit default\ndefault spanning-tree bpduguard rate-limit default", "desc": "The spanning-tree bpduguard rate-limit default command configures the global default BPDU rate limit setting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree bpduguard rate-limit enable / disable", "cmd": "spanning-tree bpduguard rate-limit enable\nspanning-tree bpduguard rate-limit disable\nno spanning-tree bpduguard rate-limit\ndefault spanning-tree bpduguard rate-limit", "desc": "These commands enable and disable BPDU rate limiting on the configuration mode interface: • spanning-tree bpduguard rate-limit enable enables BPDU rate limiting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree cost", "cmd": "spanning-tree MODE cost value\nno spanning-tree MODE cost\ndefault spanning-tree MODE cost", "desc": "The spanning-tree cost command configures the path cost of the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree edge-port bpdufilter default", "cmd": "spanning-tree edge-port bpdufilter default\nno spanning-tree edge-port bpdufilter default\ndefault spanning-tree edge-port bpdufilter default", "desc": "The spanning-tree edge-port bpdufilter default command configures the global BPDU filter setting as enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree edge-port bpduguard default", "cmd": "spanning-tree edge-port bpduguard default\nno spanning-tree edge-port bpduguard default\ndefault spanning-tree edge-port bpduguard default", "desc": "The spanning-tree edge-port bpduguard default command sets the global BPDU guard setting as enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree forward-time", "cmd": "spanning-tree forward-time period\nno spanning-tree forward-time\ndefault spanning-tree forward-time", "desc": "The spanning-tree forward-time command configures the forward delay timer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree guard", "cmd": "spanning-tree guard PORT_MODE\nno spanning-tree guard\ndefault spanning-tree guard", "desc": "The spanning-tree guard command enables root guard or loop guard on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree guard loop default", "cmd": "spanning-tree guard loop default\nno spanning-tree guard loop default\ndefault spanning-tree guard loop default", "desc": "The spanning-tree guard loop default command configures the global loop guard setting as enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree hello-time", "cmd": "spanning-tree hello-time period\nno spanning-tree hello-time\ndefault spanning-tree hello-time", "desc": "The spanning-tree hello-time command configures the hello time, which specifies the transmission interval between consecutive bridge protocol data units (BPDU) that the switch sends as a root bridge." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree link-type", "cmd": "spanning-tree link-type TYPE\nno spanning-tree link-type\ndefault spanning-tree link-type", "desc": "The spanning-tree link-type command specifies the configuration mode interfaces link type, which is normally derived from the ports duplex setting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree max-age", "cmd": "spanning-tree max-age period\nno spanning-tree max-age\ndefault spanning-tree max-age", "desc": "The spanning-tree max-age command configures the switchs max age timer, which specifies the max age value that the switch inserts in outbound BPDU packets it sends as a root bridge." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree max-hops", "cmd": "spanning-tree max-hops ports\nno spanning-tree max-hops\ndefault spanning-tree max-hops", "desc": "The spanning-tree max-hops command specifies the max hop setting that the switch inserts into BPDUs that it sends out as the root bridge." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree mode", "cmd": "spanning-tree mode VERSION\nno spanning-tree mode\ndefault spanning-tree mode", "desc": "The spanning-tree mode command specifies the spanning tree protocol version that the switch runs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree mst configuration", "cmd": "spanning-tree mst configuration\nno spanning-tree mst configuration\ndefault spanning-tree mst configuration", "desc": "The spanning-tree mst configuration command places the switch in MST-configuration mode, which is the group change mode where MST region parameters are configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree mst pvst border", "cmd": "spanning-tree mst pvst border\nno spanning-tree mst pvst border\ndefault spanning-tree mst pvst border", "desc": "The spanning-tree mst pvst border command configures MSTP PVST border feature to automatically detect border ports facing PVST+ regions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree portchannel guard misconfig", "cmd": "spanning-tree portchannel guard misconfig\nno spanning-tree portchannel guard misconfig\ndefault spanning-tree portchannel guard misconfig\nspanning-tree etherchannel guard misconfig\nno spanning-tree etherchannel guard misconfig\ndefault spanning-tree etherchannel guard misconfig\nguard misconfig commands are equivalent.", "desc": "The spanning-tree portchannel guard misconfig command enables the switch to detect misconfigured port channels that may cause network loops by monitoring inbound BPDUs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree portfast ", "cmd": "spanning-tree portfast PORT_MODE\nno spanning-tree portfast PORT_MODE\ndefault spanning-tree portfast PORT_MODE", "desc": "The spanning-tree portfast command specifies the STP port mode for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree portfast auto", "cmd": "spanning-tree portfast auto\nno spanning-tree portfast auto\ndefault spanning-tree portfast auto", "desc": "The spanning-tree portfast auto command enables auto-edge detection on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree portfast", "cmd": "spanning-tree portfast [auto | edge | network | normal]\nno spanning-tree portfast\ndefault spanning-tree portfast", "desc": "The spanning-tree portfast command configures an STP port to immediately enter forwarding state after establishing a link." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree port-priority", "cmd": "spanning-tree [MODE] port-priority value\nno spanning-tree [MODE] port-priority\ndefault spanning-tree [MODE] port-priority", "desc": "The spanning-tree port-priority command specifies the configuration mode interfaces port-priority number." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree priority", "cmd": "spanning-tree [MODE] priority level\nno spanning-tree [MODE] priority\ndefault spanning-tree [MODE] priority", "desc": "The spanning-tree priority command configures the bridge priority number." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree root", "cmd": "spanning-tree [MODE] root TYPE\nno spanning-tree [MODE] root\ndefault spanning-tree [MODE] root", "desc": "The spanning-tree root command configures the bridge priority number by adding a spanning-tree priority command to the configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree transmit active", "cmd": "spanning-tree transmit active\nno spanning-tree transmit active\ndefault spanning-tree transmit active", "desc": "The spanning-tree transmit active command enables bridge assurance globally, which enables bridge assurance on all ports with a port type of network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "spanning-tree vlan-id", "cmd": "spanning-tree vlan-id v_range\nno spanning-tree vlan-id v_range\ndefault spanning-tree vlan-id v_range", "desc": "The spanning-tree vlan-id command enables Spanning Tree Protocol (STP) on specified VLANs by removing any corresponding no spanning-tree vlan-id statements from running-config." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport backup-link", "cmd": "switchport backup-link INT_NAME [BALANCE]\nno switchport backup-link\ndefault switchport backup-link", "desc": "The switchport backup-link command establishes a primary-backup configuration for forwarding VLAN traffic between the command mode interface and a specified interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "transmit-interval", "cmd": "transmit-interval interval", "desc": "The transmit-interval command sets the interval at which loop detection packets are transmitted." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "sec", "cmd": "sec", "desc": "Max Age 20 sec Forward Delay 15 sec Priority Address Hello Time 32870 (priority 32768 sys-id-ext 102) 001c." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "sec Max Age 20 sec Forward Delay 15 sec switch#", "cmd": "sec Max Age 20 sec Forward Delay 15 sec switch#", "desc": "0:04:07 ago" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree instance detail", "cmd": "show spanning-tree instance detail", "desc": "The show spanning-tree instance detail command displays detailed MST information including MSTP-Rapid PVST+ interoperation status and Port channel port ID allocation range." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree interface", "cmd": "show spanning-tree interface INT_NAME [INFO_LEVEL]", "desc": "The show spanning-tree interface command displays spanning tree protocol information for the specified interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Spanning-Tree", "title": "show spanning-tree mst", "cmd": "show spanning-tree mst [INSTANCE] [INFO_LEVEL]", "desc": "The show spanning-tree mst command displays configuration and state information for Multiple Spanning Tree protocol (MST) instances." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "clear lldp counters", "cmd": "clear lldp counters [SCOPE]", "desc": "The clear lldp counters command resets the LLDP counters to zero." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "clear lldp table", "cmd": "clear lldp table", "desc": "The clear lldp table command clears neighbor information from the LLDP table." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "lldp hold-time", "cmd": "lldp hold-time period\nno lldp hold-time\ndefault lldp hold-time", "desc": "The lldp hold-time command specifies the amount of time a receiving device should maintain the information sent by the device before discarding it." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "lldp management-address", "cmd": "lldp management-address [INTERFACE]\nno lldp management-address [INTERFACE]\ndefault lldp management-address [INTERFACE]", "desc": "The lldp management-address command enables the user to add the IP management address used for LLDP Type-Length-Value (TLV)." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "lldp management-address vrf", "cmd": "lldp management-address vrf VRF_INSTANCE\nno lldp management-address vrf VRF_INSTANCE\ndefault lldp management-address vrf VRF_INSTANCE", "desc": "The lldp management-address vrf command enables the user to add the IP address of the VRF interface used in LLDP Type-Length-Value (TLV)." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "lldp receive", "cmd": "lldp receive\nno lldp receive\ndefault lldp receive", "desc": "The lldp receive command enables LLDP packets on an interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "lldp receive packet tagged drop", "cmd": "lldp receive packet tagged drop", "desc": "The lldp receive packet tagged drop command is a global configuration command and when configured, the LLDP ignores all the packets with VLAN-tag." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "lldp run", "cmd": "lldp run\nno lldp run\ndefault lldp run", "desc": "The lldp run command enables LLDP on the switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "lldp timer reinitialization", "cmd": "lldp timer reinitialization delay\nno lldp timer reinitialization\ndefault lldp timer reinitialization", "desc": "The lldp timer reinitialization command sets the time delay in seconds for LLDP to initialize." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "lldp timer", "cmd": "lldp timer transmission_time\nno lldp timer\ndefault lldp timer", "desc": "The lldp timer command specifies the amount of time a receiving device should maintain the information sent by the device before discarding it." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "lldp tlv transmit", "cmd": "lldp tlv transmit TLV_NAME\nno lldp tlv transmit TLV_NAM\ndefault lldp tlv transmit TLV_NAME", "desc": "The lldp tlv transmit command allows the user to specify the Type-Length-Values (TLVs) to include in LLDP packets." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "lldp transmit", "cmd": "lldp transmit\nno lldp transmit\ndefault lldp transmit", "desc": "The lldp transmit command enables the transit of LLDP packets on an interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "poe negotiation lldp disabled", "cmd": "poe negotiation lldp disabled\nno poe negotiation lldp disabled\ndefault poe negotiation lldp disabled", "desc": "Power Via MDI TLVs are included by default in LLDP packets sent to Power over Ethernet (PoE) Powered Devices (PDs) to allow dynamic negotiation of power levels." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show lldp counters", "cmd": "show lldp counters [INTERFACE]", "desc": "The show lldp counters command displays LLDP traffic information for the switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show lldp local-info", "cmd": "show lldp local-info [INTERFACE]", "desc": "The show lldp local-info command displays LLDP errors and overflows." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show lldp neighbors", "cmd": "show lldp neighbors [INTERFACE][INFO_LEVEL]", "desc": "The show lldp neighbors command displays information about the switch’s LLDP neighbors." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show lldp", "cmd": "show lldp [INTERFACE]", "desc": "The show lldp command displays LLDP information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN Introduction", "cmd": "VLAN Introduction", "desc": "Arista switches support industry standard 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN Conceptual Overview", "cmd": "VLAN Conceptual Overview", "desc": "Virtual LANs (VLANs)" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN Definition", "cmd": "VLAN Definition", "desc": "A Virtual Local Area Network (VLAN) allows a group of devices to communicate as if they were in the same network regardless of their physical location." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN Switching", "cmd": "VLAN Switching", "desc": "Ethernet and port channel interfaces are configured as switched ports by default." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN Trunking and Trunk Groups", "cmd": "VLAN Trunking and Trunk Groups", "desc": "Trunking extends multiple VLANs beyond the switch through a common interface or port channel." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN Routing", "cmd": "VLAN Routing", "desc": "Each VLAN can be associated with a Switch Virtual Interface (SVI), also called a VLAN interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN Interfaces", "cmd": "VLAN Interfaces", "desc": "A Switched Virtual Interface (SVI) connects to the VLAN segment on the switch to provide Layer 3 processing for packets from the VLAN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN Translation", "cmd": "VLAN Translation", "desc": "VLAN translation allows you to map packets from one VLAN to another." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN Configuration Procedures", "cmd": "VLAN Configuration Procedures", "desc": "These sections describe basic VLAN configuration tasks." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VLAN Policy", "cmd": "vlan 333", "desc": "The VLAN policy configuration command enables a switch to configure a VLAN policy when it receives a packet with unknown destination MAC address on a VLAN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Port VLAN Scaling on DCS-7160", "cmd": "config terminal", "desc": "Port VLAN scaling allows the user to configure a subset of ports in the scale mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "autostate", "cmd": "autostate\nno autostate\ndefault autostate", "desc": "When autostate is enabled, the VLAN interface will be up when: • the corresponding VLAN exists and is in the active state." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "encapsulation dot1q vlan", "cmd": "encapsulation dot1q vlan vlan_id\nno encapsulation dot1q vlan\ndefault encapsulation dot1q vlan", "desc": "Routed Port VLAN Translation In the configuration mode for an Ethernet or port channel interface, the encapsulation dot1q vlan translates packets with a dot1q header to the internal VLAN for a routed port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "interface vlan", "cmd": "interface vlan v_range\nno interface vlan v_range\ndefault interface vlan v_range", "desc": "The interface vlan command places the switch in VLAN-interface configuration mode for modifying parameters of the Switch Virtual Interface (SVI)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "l2-protocol encapsulation dot1q vlan", "cmd": "l2-protocol encapsulation dot1q vlan vlan_id\nno l2-protocol encapsulation dot1q vlan\ndefault l2-protocol encapsulation dot1q vlan", "desc": "The l2-protocol encapsulation dot1q vlan command enables Layer 2 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mac address forwarding", "cmd": "mac address forwarding [unicast | multicast] miss action [drop | flood | log]\nno mac address forwarding [unicast | multicast] miss action [drop | flood | log]\ndefault mac address forwarding [unicast | multicast] miss action [drop | flood | log]", "desc": "The mac address forwarding command enables a switch to configure a VLAN policy when it receives a packet with an unknown destination MAC address on a VLAN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "pvlan mapping", "cmd": "pvlan mapping {add | remove | vlan ID}\nno pvlan mapping {add | remove | vlan ID}\ndefault pvlan mapping {add | remove | vlan ID}", "desc": "The pvlan mapping command maps a Switch Virtual Interface (SVI) available in the primary VLAN to the secondary VLAN or VLANs in the VLAN configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show dot1q-tunnel", "cmd": "show dot1q-tunnel [INTERFACE]", "desc": "The show dot1q-tunnel command displays the ports that are configured in dot1q-tunnel switching mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces switchport backup-link", "cmd": "show interfaces [INTERFACE] switchport backup-link\nshow interfaces switchport backup-link [module {Fabric f_num | Linecard lc_num | Supervisor\nsvr_num | Switchcard | 1-2 | 3-6 }]", "desc": "The show interfaces switchport backup-link command displays interfaces that are configured as switchport backup pairs and the operational status of each interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show interfaces switchport vlan mapping", "cmd": "show interfaces switchport vlan mapping", "desc": "The show interfaces switchport vlan mapping command displays mapping information of the configured VLANs in an interface mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces switchport", "cmd": "show interfaces [INTERFACE] switchport", "desc": "The show interfaces switchport command displays the switching configuration and operational status of the specified ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show interfaces trunk", "cmd": "show interfaces [INTERFACE] trunk", "desc": "The show interfaces trunk command displays configuration and status information for interfaces configured in switchport trunk mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show interfaces vlans", "cmd": "show interfaces [INT_NAME] vlans", "desc": "The show interfaces vlans command displays a table that lists the VLANs that are carried by the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show pvlan mapping interfaces", "cmd": "show pvlan mapping interfaces", "desc": "The show pvlan mapping interfaces command displays information about the private VLAN mapping interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vlan", "cmd": "show vlan [VLAN_LIST] [PORT_ACTIVITY]", "desc": "The show vlan command displays the VLAN ID, name, status, and member ports of all configured VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vlan brief count", "cmd": "show vlan brief count", "desc": "The show vlan brief count command displays the number of VLANs that are configured on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vlan counters", "cmd": "show vlan counters", "desc": "Displays information about configured ingress and egress VLAN counters on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vlan dynamic", "cmd": "show vlan dynamic", "desc": "The show vlan dynamic command displays the source and quantity of dynamic VLANs on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vlan internal allocation policy", "cmd": "show vlan internal allocation policy", "desc": "The show vlan internal allocation policy command displays the method the switch uses to allocate VLANs to routed ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vlan internal usage", "cmd": "show vlan internal usage", "desc": "The show vlan internal usage command shows the VLANs that are allocated as internal VLANs for routed ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vlan trunk group", "cmd": "show vlan [ VLAN_LIST ] trunk group", "desc": "The show vlan trunk group command displays the trunk group membership of the specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "state", "cmd": "state OPERATION_STATE\nno state\ndefault state", "desc": "The state command configures the VLAN transmission state of the configuration mode VLAN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport access vlan", "cmd": "switchport access vlan v_num\nno switchport access vlan\ndefault switchport access vlan", "desc": "The switchport access vlan command specifies the access VLAN of the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport dot1q ethertype", "cmd": "switchport dot1q ethertype ethertype\nno switchport dot1q ethertype\ndefault switchport dot1q ethertype", "desc": "The switchport dot1q ethertype command configures the tag protocol identifier (TPID, also known as a dot1q ethertype), of the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport mode", "cmd": "switchport mode MODE_TYPE priority tag transmit\nno switchport mode\ndefault switchport mode", "desc": "The switchport mode command specifies the switching mode of the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport trunk allowed vlan", "cmd": "switchport trunk allowed vlan EDIT_ACTION\nno switchport trunk allowed vlan\ndefault switchport trunk allowed vlan", "desc": "The switchport trunk allowed vlan command creates or modifies the list of VLANs for which the configuration mode interface, in trunk mode, handles tagged traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport trunk group", "cmd": "switchport trunk group [ group_name ]\nno switchport trunk group [ group_name ]\ndefault switchport trunk group [ group_name ]", "desc": "The switchport trunk group command assigns the configuration mode interface to the specified trunk group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport trunk native vlan", "cmd": "switchport trunk native vlan VLAN_ID\nno switchport trunk native vlan\ndefault switchport trunk native vlan", "desc": "The switchport trunk native vlan command specifies the trunk mode native VLAN for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport vlan forwarding", "cmd": "switchport vlan forwarding [ accept | all ]", "desc": "The switchport vlan forwarding command forwards packets between the ports belonging to VLAN in the interface configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport vlan translation", "cmd": "switchport vlan translation [DIRECTION] incoming_vlanid new_vlanid\nno switchport vlan translation incoming_vlanid new_vlanid\nno switchport vlan translation DIRECTION incoming_vlanid\ndefault switchport vlan translation incoming_vlanid new_vlanid\ndefault switchport vlan translation DIRECTION incoming_vlanid", "desc": "The switchport vlan translation command allows you to map packets from one VLAN to another using VLAN translation." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport vlan translation required", "cmd": "switchport vlan translation [in | out] required", "desc": "On routed ports, the switchport vlan translation required command (permitted only on routed ports) configures the VLAN on the interface to act as the native VLAN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "trunk group", "cmd": "trunk group [name]\nno trunk group [name]\ndefault trunk group [name]", "desc": "The trunk group command assigns the configuration mode VLAN to a specified trunk group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "vlan", "cmd": "vlan vlan_range\nno vlan vlan_range\ndefault vlan vlan_range", "desc": "The vlan command places the switch in VLAN configuration mode to configure a set of virtual LANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "vlan internal order", "cmd": "vlan internal order DIRECTION [RANGE_VLAN]\nno vlan internal order\ndefault vlan internal order", "desc": "The vlan internal order command specifies the range that the switch can allocate as internal VLANs when configuring routed ports and the order of their allocation." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Set the Priority Rank to the Traffic Class", "cmd": "dcbx application tcp-sctp 860 priority 5", "desc": "The dcbx application priority command assigns a priority rank to the specified traffic class in the application priority table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Set the Priority Flow Control Priority", "cmd": "interface ethernet 2", "desc": "The priority-flow-control priority command in DCBX mode creates a priority group that pauses priority." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "which means the PFC watchdog is active.", "cmd": "show interface Eth1/1 status errdisabled", "desc": "switch# show priority-flow-control The hardware supports PFC on priorities 0 1 2 3 4 5 6 7 The PFC watchdog default timeout is 3." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "dcbx application priority", "cmd": "dcbx application [ APPLICATION_TYPE priority ] rank\nno dcbx application [ APPLICATION_TYPE priority ]\ndefault dcbx application [ APPLICATION_TYPE priority ]", "desc": "The dcbx application priority command assigns a priority rank to the specified traffic class in the application priority table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "dcbx ets", "cmd": "dcbx ets [ qos map cos value traffic-class value | traffic-class value bandwidth value ]", "desc": "The dcbx ets command configures the enhanced transmission selection (ETS) to the specified QoS group, and sets the traffic class priority and the bandwidth percentage for the packets in the traffic class." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "dcbx mode", "cmd": "dcbx mode MODE_NAME\nno dcbx mode\ndefault dcbx mode", "desc": "The dcbx mode command enables DCBX mode on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "no priority-flow-control", "cmd": "no priority-flow-control\ndefault priority-flow-control", "desc": "The no priority-flow-control and default priority-flow-control commands disable the priority flow control (PFC) on the configuration mode interface and restore the default packet drop setting on the interface, which takes effect when PFC is re-enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "priority-flow-control", "cmd": "priority-flow-control on\nno priority-flow-control on\ndefault priority-flow-control on", "desc": "The priority-flow-control command enables Priority Flow Control (PFC) on the configuration mode interface to pause selected traffic classes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "platform fm6000 pfc-wm", "cmd": "platform fm6000 pfc-wm [ RX-PRIVATE_SIZE ][ PFC-ON_WM ][ PFC-OFF_WM ]\nno platform fm6000 pfc-wm\ndefault platform fm6000 pfc-wm", "desc": "The platform fm6000 pfc-wm command configures the hardware buffer space allocated to the Priority Flow Control (PFC) RX-Private buffer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "priority-flow-control pause watchdog action", "cmd": "priority-flow-control pause watchdog action\nno priority-flow-control pause watchdog action", "desc": "The priority-flow-control pause watchdog action command either drops the traffic on a stuck queue, or error disables the port which has a stuck queue, or notifies if there is no action on the stuck queue." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "priority-flow-control pause watchdog default", "cmd": "priority-flow-control pause watchdog default\nno priority-flow-control pause watchdog default", "desc": "The priority-flow-control pause watchdog default command monitors all the egress queues which have guaranteed bandwidth enabled and for the priorities on which PFC is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "priority-flow-control pause watchdog hardware", "cmd": "priority-flow-control pause watchdog hardware\nno priority-flow-control pause watchdog hardware", "desc": "The priority-flow-control pause watchdog hardware command configures specific PFC priorities as non-disruptive." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "priority-flow-control priority", "cmd": "priority-flow-control priority pack-drop\nno priority-flow-control priority\ndefault priority-flow-control priority", "desc": "The priority-flow-control priority command configures the packet resolution setting on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show dcbx", "cmd": "show dcbx [INTERFACE]", "desc": "The show dcbx command list DCBX status and the interfaces on which DCBX is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show dcbx application-priority-configuration", "cmd": "show dcbx [INTERFACE] application-priority-configuration", "desc": "The show dcbx application-priority-configuration command displays the DCBX peer application priority configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show dcbx priority-flow-control-configuration", "cmd": "show dcbx [ INTERFACE ] priority-flow-control-configuration", "desc": "The show dcbx priority-flow-control-configuration command displays the IEEE DCBX peer priority flow control configurations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show dcbx status", "cmd": "show dcbx [INTERFACE] status", "desc": "The show dcbx status command displays the DCBX status on the interfaces on which DCBX is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces priority-flow-control", "cmd": "show interfaces [ INTERFACE ] priority-flow-control [ INFO_LEVEL ]", "desc": "The show interfaces priority-flow-control command displays the status of PFC on all interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform fm6000 pfc-wm", "cmd": "show platform fm6000 pfc-wm", "desc": "The show platform fm6000 pfc-wm command displays the buffer space allocated to the RX-Private buffer and buffer levels that trigger PFC frame transmission activities." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show priority-flow-control", "cmd": "show priority-flow-control [ status | counters | interfaces ]", "desc": "The show priority-flow-control command displays the status and other PFC and PFC watchdog information on all interfaces if no specific interface is specified." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "IP Address Locking", "cmd": "IP Address Locking", "desc": "EOS provides IP Address Locking capabilities when configured on an Ethernet Layer 2 port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "IP Address Locking Configuration", "cmd": "IP Address Locking Configuration", "desc": "This section describes IP Locking configuration tasks." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "IP Address Locking Commands", "cmd": "IP Address Locking Commands", "desc": "IP Address Locking Configuration Commands • address locking deny • address locking dhcp • address-locking disable • address locking lease query • address locking local-interface IP Address Locking Clear Commands" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "address locking deny", "cmd": "address locking deny ip_address", "desc": "Use the address locking command to block IPv4 and ARP packets with specific IPv4 addresses on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "address locking dhcp", "cmd": "address locking dhcp server ipv4 ip_address", "desc": "Use the address locking command to enter address locking mode and then dhcp to configure the DHCP server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "address-locking disable", "cmd": "address-locking disable", "desc": "The address-locking disable command disables IP Address Locking on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "address locking lease", "cmd": "lease ip_address mac ip_address", "desc": "Use the address locking command to enter the IPv4 and IPv6 locking mode and then on the switch, use the lease to configure DHCP leases." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "address locking lease query", "cmd": "lease query retry interval interval-time", "desc": "Use the address locking command to enter the IPv4 and IPv6 locking mode and then use the lease query retry interval to configure DHCP leases." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "address locking local-interface", "cmd": "address locking local-interface [Ethernet | Loopback | Management | Port Channel | Tunnel | Vlan]", "desc": "Use the address locking local-interface command to configure a local interface for IPv4 and IPv6 locking IP addresses on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "clear address locking lease", "cmd": "clear address locking lease all", "desc": "Use the clear address locking lease command to remove lease bindings at different granularities." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "locked-address expiration mac disabled", "cmd": "locked-address expiration mac disabled\nno locked-address expiration mac disabled\ndefault locked-address expiration mac disabled", "desc": "IP Address Locking, by default, removes authorization from leases after the corresponding MAC addresses age out." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "locked-address ipv4 enforcement disabled", "cmd": "locked-address ipv4 enforcement disabled\nno locked-address ipv4 enforcement disabled\ndefault locked-address ipv4 enforcement disabled", "desc": "The locked-address ipv4 enforcement disabled command disables address filtering for all ports with IPv4 Locking enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "locked-address ipv6 enforcement disabled", "cmd": "locked-address IPv6 enforcement disabled\nno locked-address IPv6 enforcement disabled\ndefault locked-address IPv6 enforcement disabled", "desc": "The locked-address ipv6 enforcement disabled command disables address filtering for all ports with IPv6 Locking enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "show address locking", "cmd": "show address locking", "desc": "Use the show address locking command to display the status of IP and IPv6 locking." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "show address locking counters", "cmd": "show address locking counters", "desc": "The show address locking counters command displays DHCP lease query messages sent, received, and dropped." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "any", "cmd": "any", "desc": "Ethernet49/1 IP DROP" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "c4:01:32:58:00:00", "cmd": "c4:01:32:58:00:00", "desc": "Ethernet49/1 IP PERMIT" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "show address locking table ipv4", "cmd": "show address locking table ipv4", "desc": "Use the show address locking table ipv4 command to display all DHCP leases with IP Locking, and the interfaces with authorized the IP addresses." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switch# show interface et1.1-2 status", "cmd": "mac address-table static 0000.000a.000a vlan 200 interface et1.1", "desc": "Port Name Status Vlan Duplex Speed Et1." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "ARP Inspection", "cmd": "ip arp inspection vlan 1 - 150", "desc": "The Address Resolution Protocol (ARP) inspection command ip arp inspection vlan activates a security feature that protects the network from ARP spoofing." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show arp agent", "cmd": "show arp agent [ipv4 | ipv6] [cache | dynamic | capacity | [interface interface]", "desc": "The show arp agent command displays the aggregate of all ARP entries that the CLI and other switch agents requested the ARP agent to install in EOS." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show ip arp inspection statistics", "cmd": "show ip arp inspection statistics [vlan [vid]|[interface] interface intf_slot | intf_port]", "desc": "The show ip arp inspection statistics command displays the statistics of inspected ARP packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show ip arp inspection vlan", "cmd": "show ip arp inspection vlan [list]", "desc": "The show ip arp inspection vlan command displays the configuration and operation state of ARP inspection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "show ip dhcp relay counters", "cmd": "show ip dhcp relay counters", "desc": "The show ip dhcp relay counters command displays the number of DHCP packets received, forwarded, or dropped on the switch and on all interfaces enabled as DHCP relay agents." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "show ip dhcp relay", "cmd": "show ip dhcp relay", "desc": "The show ip dhcp relay command displays the DHCP relay agent configuration status on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "show ip dhcp snooping counters", "cmd": "show ip dhcp snooping counters [counter_typedebug]", "desc": "The show ip dhcp snooping counters command displays counters that track the quantity of DHCP request and reply packets received by the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "show ip dhcp snooping hardware", "cmd": "show ip dhcp snooping hardware", "desc": "The show ip dhcp snooping hardware command displays internal hardware DHCP snooping status on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "show ip dhcp snooping", "cmd": "show ip dhcp snooping", "desc": "The show ip dhcp snooping command displays the DHCP snooping configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip interface", "cmd": "show ip interface [interface_name] [vrf_inst]", "desc": "The show ip interface command displays the status of specified interfaces that are configured as routed ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip interface brief", "cmd": "show ip interface [interface_name] [vrf_inst] brief", "desc": "Use the show ip interface brief command output to display the status summary of the specified interfaces that are configured as routed ports." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "show ip route", "cmd": "show ip route [vrf_instance][address][route_type][info_level][prefix]", "desc": "The show ip route command displays routing table entries that are in the Forwarding Information Base (FIB), including static routes, routes to directly connected networks, and dynamically learned routes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "show ip route age", "cmd": "show ip route address age", "desc": "The show ip route age command displays the time when the route for the specified network was present in the routing table." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "show ip route gateway", "cmd": "show ip route [vrf_instance] gateway", "desc": "The show ip route gateway command displays IP addresses of all gateways (next hops) used by active routes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Static and Default IPv4 Routes", "cmd": "Static and Default IPv4 Routes", "desc": "Static routes are entered through the CLI and are typically used when dynamic protocols cannot establish routes to a specified destination prefix." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Dynamic IPv4 Routes", "cmd": "Dynamic IPv4 Routes", "desc": "Dynamic routing protocols establish dynamic routes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "to cpu", "cmd": "to cpu", "desc": "B A R A R A B B A R" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "on Vlan2000", "cmd": "on Vlan2000", "desc": "Vlan3020 switch>" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "on Vlan2901", "cmd": "on Vlan2901", "desc": "Vlan3020 switch>" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "on Vlan2902", "cmd": "on Vlan2902", "desc": "Vlan3020 switch>" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "via 172.17.254.20 on Vlan3003", "cmd": "via 172.17.254.20 on Vlan3003", "desc": "via 172.17.254.67 on Vlan3008 via 172.17.254.98 on Vlan3492 via 172.17.254.86 on Vlan3884 via 172.17.253.2 on Vlan3000 F" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "via 172.25.0.1 on Vlan101", "cmd": "via 172.25.0.1 on Vlan101", "desc": "F" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "via 172.17.254.29 on Vlan3910", "cmd": "via 172.17.254.29 on Vlan3910", "desc": "F" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "via 172.17.254.33 on Vlan3911", "cmd": "via 172.17.254.33 on Vlan3911", "desc": "F" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "via 172.17.254.105 on Vlan3912 switch#", "cmd": "via 172.17.254.105 on Vlan3912 switch#", "desc": "Vlan3020 switch>" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Functions Supported for Arista Switches", "cmd": "BGP Functions Supported for Arista Switches", "desc": "Arista switches support these BGP functions: • A single BGP instance • Simultaneous internal (IBGP) and external (EBGP) peering • Multiprotocol BGP • BGP Confederations" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Route Management", "cmd": "Route Management", "desc": "When enabling routing, the switch discovers the best route to a packet destination address by exchanging routing information with other devices." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Route Redistribution", "cmd": "Route Redistribution", "desc": "Route redistribution advertises connected (static) routes or routes established by other routing protocols into a dynamic routing protocol routing domain." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Show Commands", "cmd": "show ip hardware fib summary", "desc": "• The show ip hardware fib summary command displays the statistics of this RECMP deduping:" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "uRPF Operation", "cmd": "uRPF Operation", "desc": "Configure uRPF on interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "uRPF Configuration", "cmd": "interface vlan 17", "desc": "Enable Unicast Reverse Path Forwarding (uRPF) for IPv4 packets ingressing the configuration mode interface using the ip verify command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Default VRF", "cmd": "Default VRF", "desc": "EOS creates the default VRF automatically and you cannot renamed or configure it." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "rd (VRF configuration mode)", "cmd": "rd (VRF configuration mode)", "desc": "The rd command issued in VRF Configuration Mode is a legacy command supported for backward compatibility." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "Show Commands", "cmd": "show platform arad ip route summary", "desc": "Display the IPv4 route scale summary using the show platform arad ip route summary command in the Global Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "IP Source Guard", "cmd": "IP Source Guard", "desc": "IP Source Guard (IPSG) prevents IP spoofing attacks." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Nexthop Group Commands", "cmd": "Nexthop Group Commands", "desc": "Nexthop Commands • entry (Next-hop Group) • ip route nexthop-group • nexthop-group • size (Nexthop Group) • ttl (Next-hop Group) • tunnel-source (Next-hop Group) Nexthop Show Command • show nexthop-group" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "entry (Next-hop Group)", "cmd": "entry index tunnel-destination ipv4_address\nno entry index\ndefault entry index", "desc": "The entry command defines a next-hop entry in the nexthop group configuration mode ." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "ip route nexthop-group", "cmd": "ip route [VRF_INST dest_net nexthop-group nhgp_name [dist][TAG_OPTION][RT_NAME]\nno ip route [VRF_INST] dest_net [nexthop-group nhgroup_name][distance]\ndefault ip route [VRF_INST] dest_net [nexthop-group nhgroup_name][distance]", "desc": "The ip route nexthop-group command creates a static route." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "nexthop-group", "cmd": "nexthop-group group_name type TUNNEL_TYPE\nno nexthop-group [group_name][type TUNNEL_TYPE]\ndefault nexthop-group [group_name][typeTUNNEL_TYPE]", "desc": "The nexthop-group command places the switch in nexthop-group configuration mode, through which next-hop groups are created or modified." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show nexthop-group", "cmd": "show nexthop-group nhgroup_name [VRF_INST]", "desc": "The show nexthop-group command displays properties of the specified nexthop group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "size (Nexthop Group)", "cmd": "size entry_size\nno size entry_size\ndefault size entry_size", "desc": "The size command configures the quantity of next-hop entries in the Nexthop-Group Configuration Mode ." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ttl (Next-hop Group)", "cmd": "ttl hop_expiry\nno ttl hop_expiry\ndefault ttl hop_expiry", "desc": "The ttl command specifies the number entered into the TTL (time to live) encapsulation field of packets transmitted to the address designated by the configuration mode next-hop group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "tunnel-source (Next-hop Group)", "cmd": "tunnel-source SOURCE\nno tunnel-source SOURCE\ndefault tunnel-source SOURCE", "desc": "The tunnel-source command specifies the address that is entered into the source IP address encapsulation field of packets that are transmitted as designated by the nexthop group configuration mode ." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "tunnel nexthop-group unresolved", "cmd": "tunnel nexthop-group unresolved invalid\nno tunnel nexthop-group unresolved invalid\ndefault tunnel nexthop-group unresolved invalid", "desc": "The tunnel nexthop-group unresolved command in the Router General Configuration Mode installs a nexthop-group tunnel only if a viable nexthop group exists." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "sub-option 2 type string data “vendor\"", "cmd": "sub-option 2 type string data “vendor\"", "desc": "Configuring DHCP Server Subnets DHCP Server settings can also be configured per subnet and overrides the DHCP Server global mode configurations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "agent SandL3Unicast terminate", "cmd": "agent SandL3Unicast terminate", "desc": "The agent SandL3Unicast terminate command restarts the platform Layer 3 agent to ensure optimized IPv4 routes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "arp", "cmd": "arp [vrf_instance] ipv4_addr mac_addr arpa\nno arp [vrf_instance] ipv4_addr\ndefault arp [vrf_instance] ipv4_addr", "desc": "The arp command adds a static entry to an Address Resolution Protocol (ARP) cache." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "arp aging timeout", "cmd": "arp aging timeout arp_time\nno arp aging timeout\ndefault arp aging timeout", "desc": "The arp aging timeout command specifies the duration of dynamic address entries in the Address Resolution Protocol (ARP) cache for addresses learned through the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "arp cache dynamic capacity", "cmd": "ipv6 nd cache dynamic capacity capacity\nno arp cache dynamic capacity\ndefault arp cache dynamic capacity", "desc": "AARP and IPv6 Neighbor Discovery store neighbor address resolutions in a neighbor cache." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "arp cache persistent", "cmd": "arp cache persistent\nno arp cache persistent\ndefault arp cache persistent", "desc": "The arp cache persistent command restores the dynamic entries in the Address Resolution Protocol (ARP) cache after reboot." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "arp gratuitous accept", "cmd": "arp gratuitous accept\nno arp gratuitous accept\ndefault arp gratuitous accept", "desc": "The arp gratuitous accept command configures the configuration mode interface to accept gratuitous ARP request packets received on that interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "arp proxy max-delay", "cmd": "arp proxy max-delay milliseconds", "desc": "The arp proxy max-delay command enables delaying proxy ARP requests on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "balance factor", "cmd": "balance factor factor_value\nno balance factor factor_value", "desc": "The balance factor command in the Port Group Host Configuration Mode configures port balancing for Cluster Load Balancing on the network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "clear arp inspection statistics", "cmd": "clear arp inspection statistics", "desc": "The clear arp inspection statistics command clears ARP inspection statistics." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "clear arp", "cmd": "clear arp [vrf_instance] ipv4_addr", "desc": "The clear arp command removes the specified dynamic ARP entry for the specified IP address from the Address Resolution Protocol (ARP) table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "clear arp-cache", "cmd": "clear arp-cache [vrf_instance][interface_name]", "desc": "The clear arp-cache command refreshes dynamic entries in the Address Resolution Protocol (ARP) cache." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "clear ip dhcp relay counters", "cmd": "clear ip dhcp relay counters [interface_name]", "desc": "The clear ip dhcp relay counters command resets the DHCP relay counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "clear ip dhcp snooping counters", "cmd": "clear ip dhcp snooping counters [counter_type]", "desc": "The clear ip dhcp snooping counters command resets the DHCP snooping packet counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "clear ip multicast count", "cmd": "clear ip multicast count [group_address [source_address]]", "desc": "The clear ip multicast count command clears all counters associated with the multicast traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "clear snapshot counters ecmp", "cmd": "clear snapshot counters ecmp req_id_range", "desc": "The clear shapshot counters ecmp deletes previous snapshots." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "cli vrf", "cmd": "cli vrf [vrf_id]", "desc": "The cli vrf command specifies the context-active VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "compress", "cmd": "ip hardware fib optimize prefix-length prefix-length expand prefix-length compress\nno ip hardware fib optimize prefix-length prefix-length expand prefix-length compress", "desc": "The compress command increases the hardware resources available for the specified prefix lengths." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "destination grouping", "cmd": "destination groupings [bgp field-set] [prefix length length] [vtep]\nno destination groupings [bgp field-set] [prefix length length] [vtep]", "desc": "The destination grouping command in the Cluster Load Balancing Configuration mode allows the configuration of destination grouping settings with BGP, prefix, or VTEP groupings for cluster load balancing." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp relay", "cmd": "dhcp relay\nno dhcp relay", "desc": "The dhcp relay command places the switch in the DHCP relay mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server", "cmd": "dhcp server\nno dhcp server", "desc": "The dhcp server command places the switch in the DHCP relay mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server client", "cmd": "dhcp server client class [ipv4|ipv6] definition client_class assignments [defaultgateway|dns|lease|option|private-option|tftp]", "desc": "The dhcp server client command configures client options for the DHCP server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server debug", "cmd": "dhcp server debug log file", "desc": "The dhcp server debug log command configures DHCP server debugging configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server dns", "cmd": "dhcp server dns [domain name domain_name ] [server [ipv4|ipv6] ip_address", "desc": "The dhcp server dns command configures DHCP server DNS options." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server lease", "cmd": "dhcp server lease time [ipv4|ipv6] days days hourshours minutesminutes", "desc": "The dhcp server lease command configures DHCP server lease options." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server option", "cmd": "dhcp server option [ipv4|ipv6] code [always-send data type [hex |string]", "desc": "The dhcp server option command configures DHCP server options." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server private-option", "cmd": "dhcp server private-option [ipv4|ipv6] code [always-send data type [hex |", "desc": "The dhcp server private-option command configures DHCP server private options." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server subnet", "cmd": "dhcp server subnet ipv4_address ipv6_address", "desc": "The dhcp server subnet command configures DHCP server subnet options." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server subnet client", "cmd": "dhcp server subnet [ipv4|ipv6] client class definition client_class [defaultgateway|dns|lease|name|range|reservations|tftp]", "desc": "The dhcp server subnet [ipv4 | ipv6] client command configures client options for the DHCP server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server tftp", "cmd": "dhcp server tftp server [file [ipv4|ipv6] file_name] [option [150|66]] ipv4", "desc": "The dhcp server tftp command configures DHCP server TFTP options." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server vendor-option", "cmd": "dhcp server vendor-option ipv4 vendor_id default vendor_id sub-option suboption_code", "desc": "The dhcp server vendor-option command configures the DHCP server vendor identifier options." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "dhcp server vendor-option ipv4 sub-option", "cmd": "ip_address [string data quoted_string", "desc": "The dhcp server vendor-option command configures the DHCP server vendor identifier options." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "fib route limit", "cmd": "router general", "desc": "The fib route limit command in the Router General Configuration Mode limits the number of routes added to the Forwarding Information Database (FIB) and also suppresses BGP routes when exceeding the table limit." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "flow", "cmd": "flow [counters] [match encapsulation [none | vxlan] ipv4] [monitor]\nno flow [counters] [match encapsulation [none | vxlan] ipv4] [monitor]", "desc": "The flow command in the Cluster Load Balancing Configuration Mode allows the configuration of flow settings for Cluster Load Balancing including counters, matching, monitoring, sources, and warnings." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "flow exhaustion", "cmd": "flow exhaustion action [dscp dscp_value] [traffic-class class_value\nno flow exhaustion action [dscp dscp_value] [traffic-class class_value", "desc": "The flow exhaustion command in the Port Group Host Configuration Mode configures flow-related settings for cluster load balancing on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "flow source learning", "cmd": "flow source learning\nno flow source learning", "desc": "The flow source learning command enters the Flow Source Learning Configuration Mode and configures cluster load balancing to learn flow sources." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "flow limit", "cmd": "flow limit max_flows learning max_flows\nno flow limit max_flows learning max_flows", "desc": "The flow limit command in the Port Group Host Configuration Mode configures flow-related settings for cluster load balancing on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "flow warning", "cmd": "flow warning threshold_flows\nno flow warning threshold_flows", "desc": "The flow warning command in the Port Group Host Configuration Mode configures flow warning thresholds for cluster load balancing on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "forwarding type", "cmd": "forwarding type routed\nno forwarding type routed", "desc": "The forwarding type command configures the encapsulation and mode used to deliver packets between TORs over the uplinks." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "interface tunnel", "cmd": "interface tunnel number\nno interface tunnel number", "desc": "The interface tunnel command places the switch in Interface-Tunnel Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "ip arp inspection limit", "cmd": "ip arp inspection limit [ rate pps] [burst_interval sec | none]\nno ip arp inspection limit [ rate pps] [burst_interval sec | none]\ndefault ip arp inspection limit [ rate pps] [burst_interval sec | none]", "desc": "The ip arp inspection limit command disables the interface if the incoming ARP rate exceeds the configured value rate limit of the incoming ARP packets on an interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "ip arp inspection logging", "cmd": "ip arp inspection logging [rate pps ][burst_interval sec | none]\nno ip arp inspection logging [RATE pps ][burst_interval sec | none]\ndefault ip arp inspection logging [RATE pps ][burst_interval sec | none]", "desc": "The ip arp inspection logging command enables logging of incoming ARP packets on the interface if the rate exceeds the configured value." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "ip arp inspection trust", "cmd": "ip arp inspection trust\nno ip arp inspection trust\ndefault ip arp inspection trust", "desc": "The ip arp inspection trust command configures the trust state of an interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "ip arp inspection vlan", "cmd": "ip arp inspection vlan [list]", "desc": "The ip arp inspection vlan command enables ARP inspection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ip dhcp relay all-subnets", "cmd": "ip dhcp relay all-subnets\nno ip dhcp relay all-subnets\ndefault ip dhcp relay all-subnets", "desc": "The ip dhcp relay all-subnets command configures the DHCP smart relay status in the Interface Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ip dhcp relay all-subnets default", "cmd": "ip dhcp relay all-subnets default\nno ip dhcp relay all-subnets default\ndefault ip dhcp relay all-subnets default", "desc": "The ip dhcp relay all-subnets default command configures the global DHCP smart relay setting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ip dhcp relay always-on", "cmd": "ip dhcp relay always-on\nno ip dhcp relay always-on\ndefault ip dhcp relay always-on", "desc": "The ip dhcp relay always-on command enables the DHCP relay agent on the switch regardless of the DHCP relay agent status on any interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ip dhcp relay information option (Global)", "cmd": "ip dhcp relay information option\nno ip dhcp relay information option\ndefault ip dhcp relay information option", "desc": "The ip dhcp relay information option command configures the switch to attach tags to DHCP requests before forwarding them to the DHCP servers designated by the ip helper-address commands." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ip dhcp relay information option circuit-id", "cmd": "ip dhcp relay information option circuit-id id_label\nno ip dhcp relay information option circuit-id\ndefault ip dhcp relay information option circuit-id", "desc": "The ip dhcp relay information option circuit-id command specifies the content of tags that the switch attaches to DHCP requests before forwarding them from the configuration mode interface to DHCP server addresses specified by ip helper-address commands." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ip dhcp snooping", "cmd": "ip dhcp snooping\nno ip dhcp snooping\ndefault ip dhcp snooping", "desc": "The ip dhcp snooping command enables DHCP snooping globally on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ip dhcp snooping bridging", "cmd": "ip dhcp snooping bridging\nno ip dhcp snooping bridging", "desc": "The ip dhcp snooping bridging command enables the DHCP snooping bridging configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ip dhcp snooping information option", "cmd": "ip dhcp snooping information option\nno ip dhcp snooping information option\ndefault ip dhcp snooping information option", "desc": "The ip dhcp snooping information option command enables the insertion of option-82 DHCP snooping information in DHCP packets on VLANs where you have DHCP snooping enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "ip dhcp snooping vlan", "cmd": "ip dhcp snooping vlan v_range\nno ip dhcp snooping vlan v_range\ndefault ip dhcp snooping vlan v_range", "desc": "The ip dhcp snooping vlan command enables DHCP snooping on specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip hardware fib ecmp resilience", "cmd": "ip hardware fib ecmp resilience net_addr capacity nhop_max redundancy duplicates\nno ip hardware fib ecmp resilience net_addr\ndefault ip hardware fib ecmp resilience net_addr", "desc": "The ip hardware fib ecmp resilience command enables resilient ECMP for the specified IP address prefix and configures a fixed number of next hop entries in the hardware ECMP table for that prefix." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip hardware fib load-balance distribution", "cmd": "ip hardware fib load-balance distribution [dynamic | hash] average-trafficweight average_traffic_weight_value flow-set-size flow_set_size_value inactivity\ninactivity_value sampling-period sampling_period seed hash_seed member-selection", "desc": "The ip hardware fib load-balance distribution command allows the configuration of dynamic load balancing (DLB) on ECMP Groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip hardware fib next-hop resource optimization", "cmd": "ip hardware fib next-hop resource optimization options\nno ip hardware fib next-hop resource optimization options", "desc": "The ip hardware fib next-hop resource optimization command enables or disables the resource optimization features on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip hardware fib optimize", "cmd": "ip hardware fib optimize exact-match prefix-length prefix-length prefix-length", "desc": "The ip hardware fib optimize command enables IPv4 route scale." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip hardware fib optimize prefixes", "cmd": "ip hardware fib optimize vrf vrf_name prefixes minimum count num_prefixes\nno ip hardware fib optimize vrf vrf_name prefixes minimum count num_prefixes", "desc": "The ip hardware fib optimize prefixes command in the Global Configuration Mode reserves IPv4 optimized prefixes on the default and non-default VRFs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip helper-address", "cmd": "ip helper-address ipv4_addr [vrf vrf_name][source-address ipv4_addr | source-interface interfaces]\nno ip helper-address [ipv4_addr]\ndefault ip helper-address [ipv4_addr]", "desc": "The ip helper-address command enables the DHCP relay agent on the Interface Configuration Mode and specifies a forwarding address for DHCP requests." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip icmp redirect", "cmd": "ip icmp redirect\nno ip icmp redirect\ndefault ip icmp redirect", "desc": "The ip icmp redirect command enables the transmission of ICMP redirect messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip load-sharing", "cmd": "ip load-sharing hardware seed\nno ip load-sharing hardware\ndefault ip load-sharing hardware", "desc": "The ip load-sharing command provides the hash seed to an algorithm the switch uses to distribute data streams among multiple equal-cost routes to an individual IPv4 subnet." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip local-proxy-arp", "cmd": "ip local-proxy-arp\nno ip local-proxy-arp\ndefault ip local-proxy-arp", "desc": "The ip local-proxy-arp command enables local proxy ARP (Address Resolution Protocol) in the Interface Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip multicast count", "cmd": "ip multicast count [group_address [source_address] | bytes | packets]\nno ip multicast count [group_address [source_address] | bytes | packets]\ndefault ip multicast count [group_address [source_address] | bytes | packets]", "desc": "The ip multicast count command enables the IPv4 multicast route traffic counter of group and source addresses in either bytes or packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip proxy-arp", "cmd": "ip proxy-arp\nno ip proxy-arp\ndefault ip proxy-arp", "desc": "The ip proxy-arp command enables proxy ARP in the Interface Configuration Mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "ip route", "cmd": "ip route [vrf_instance] dest_net next-hop [distance][tag_varname][rt_name]\nno ip route [vrf_instance] dest_net [next-hop][distance]\ndefault ip route [vrf_instance] dest_net [next-hop][distance]", "desc": "The ip route command creates a static route." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip routing", "cmd": "ip routing [vrf_instance]\nno ip routing [delete_routes][vrf_instance\ndefault ip routing [delete_routes][vrf_instance]", "desc": "The ip routing command enables IPv4 routing." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "ip source binding", "cmd": "ip source binding [ip_address][mac_address] vlan [vlan_range] interface [interface]\nno ip source binding [ip_address][mac_address] vlan [vlan_range] interface [interface]\ndefault ip source binding [ip_address][mac_address] vlan [vlan_range] interface [interface]", "desc": "Layer 2 Port-Channels support IP source guard (IPSG), not member ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "ip verify source", "cmd": "ip verify source vlan [vlan_range]\nno ip verify source [vlan_range]\ndefault ip verify source", "desc": "The ip verify source command configures IP source guard (IPSG) applicable only to Layer 2 ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip verify", "cmd": "ip verify unicast source reachable-via rpf_mode\nno ip verify unicast\ndefault ip verify unicast", "desc": "The ip verify command configures Unicast Reverse Path Forwarding (uRPF) for inbound IPv4 packets on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv4 routable 240.0.0.0/4", "cmd": "ipv4 routable 240.0.0.0/4\nno ipv4 routable 240.0.0.0/4\ndefault ipv4 routable 240.0.0.0/4", "desc": "The ipv4 routable 240." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "load-balance cluster", "cmd": "load-balance cluster\nno load-balance cluster", "desc": "The load-balance cluster command enters the Cluster Load Balancing (CLB) Configuration Mode and configure parameters for cluster load-balancing on a network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "load-balance method", "cmd": "load-balance method [flow round-robin] [spine port-index]\nno load-balance method [flow round-robin] [spine port-index]", "desc": "The load-balance command in the Cluster Load Balancing Configuration Mode configures the method of load-balancing traffic on the cluster." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "member Ethernet", "cmd": "member Ethernet interface_number\nno member Ethernet interface_number", "desc": "The member Ethernet command in the Port Group Host Configuration Mode configures per port hardware interfaces for cluster load balancing on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "platform barefoot bfrt vrf", "cmd": "platform barefoot bfrt vrf vrf_name", "desc": "The platform barefoot bfrt vrf command configures the forwarding plane agent on supported platforms to restart and listen on the configured VRF for connections." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "platform trident forwarding-table partition", "cmd": "platform trident forwarding-table partition size\nno platform trident forwarding-table partition\ndefault platform trident forwarding-table partition", "desc": "The platform trident forwarding-table partition command provides a shared table memory for L2, L3 and algorithmic LPM entries that can be partitioned in different ways." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "platform trident routing-table partition", "cmd": "platform trident routing-table partition size\nno platform trident routing-table partition\ndefault platform trident routing-table partition", "desc": "The platform trident routing-table partition command manages the partition sizes for the hardware LPM table that stores IPv6 routes of varying sizes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "port group host", "cmd": "port group host word\nno port group host word", "desc": "The port group host command enters the Port Group Host Configuration mode and configures additional port parameters for Cluster Load Balancing by identifying the ports connected to the GPU server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "rib fib policy", "cmd": "rib [ipv4 | ipv6] fib policy name\nno rib [ipv4 | ipv6] fib policy name\ndefault rib [ipv4 | ipv6] fib policy name", "desc": "The rib fib policy command enables FIB policy for a particular VRF under router general configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show arp", "cmd": "show arp [vrf_inst][format][host_addr][host_name][intf][mac_addr][data]", "desc": "The show arp command displays all ARP tables." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "show dhcp server", "cmd": "show dhcp server [ipv4 | ipv6 | leases | vrf]", "desc": "Use the show dhcp server command to display DHCP server information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "show dhcp server leases", "cmd": "show dhcp server leases [ipv4 | ipv6]", "desc": "Use the show dhcp server leases command to display DHCP server lease information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show hardware capacity", "cmd": "show hardware capacity", "desc": "The show hardware capacity command displays the utilization of the hardware resources:" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show hardware resource DlbEcmpGroupTable agent *", "cmd": "show hardware resource DlbEcmpGroupTable agent *", "desc": "The following platforms use the show hardware resource DlbEcmpGroupTable agent * command: • DCS-7050CX4 • DCS-7050DX4-32S-F • DCS-7050PX4-32S-F • DCS-7050SDX4 • DCS-7050SPX4 • 7358X4-SC" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show hardware resource l3 summary", "cmd": "show hardware resource l3 summary", "desc": "The show hardware resource l3 summary command displays a summary of used hardware entries and the total available capacity for Layer 3 features such as next-hops and ECMP groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interface tunnel", "cmd": "show interface tunnel number", "desc": "The show interface tunnel command displays the interface tunnel information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip arp", "cmd": "show ip arp [vrf_inst][format][host_addr][host_name][intf][mac_addr][data]", "desc": "The show ip arp command displays ARP cache entries that map an IPv4 address to a corresponding MAC address." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show ip route host", "cmd": "show ip route [vrf_instance] host", "desc": "The show ip route host command displays all host routes in the host forwarding table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "via 172.17.254.105 on Vlan3912 switch>", "cmd": "via 172.17.254.105 on Vlan3912 switch>", "desc": "Vlan3992 switch>" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show ip route match tag", "cmd": "show ip route [vrf_instance] address match tag", "desc": "The show ip route match tag command displays the route tag assigned to the specified IPv4 address or subnet." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show ip route summary", "cmd": "show ip route [vrf_instance] summary", "desc": "The show ip route summary command displays the number of routes, categorized by destination prefix, in the routing table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show ip verify source", "cmd": "show ip verify source [vlan | detail]", "desc": "The show ip verify source command displays the IP source guard (IPSG) configuration, operational states, and IP-MAC binding entries for the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "AAA", "title": "show platform arad ip route", "cmd": "show platform arad ip route", "desc": "The show platform arad ip route command shows resources for all IPv4 routes in hardware." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show platform barefoot bfrt", "cmd": "show platform barefoot bfrt", "desc": "The show platform barefoot bfrt command displays information about the current BfRuntime server configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show platform fap eedb ip-tunnel gre interface tunnel", "cmd": "show platform fap eedb ip-tunnel gre interface tunnel number", "desc": "The show platform fap eedb ip-tunnel gre interface tunnel command verifies the tunnel encapsulation programming for the tunnel interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show platform fap tcam summary", "cmd": "show platform fap tcam summary", "desc": "The show platform fap tcam summary command displays information about the TCAM bank that is allocated for GRE packet termination lookup." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show platform trident forwarding-table partition", "cmd": "show platform trident forwarding-table partition\nshow platform trident forwarding-table partition flexible", "desc": "The show platform trident forwarding-table partition command displays the size of the L2 MAC entry tables, L3 IP forwarding tables, and Longest Prefix Match (LPM) routes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show platform trident l3 shadow dlb-ecmp-group-control", "cmd": "show platform trident l3 shadow dlb-ecmp-group-control", "desc": "The show platform trident l3 shadow dlb-ecmp-group-control displays information about Dynamic Load Balancing with ECMP groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show rib route ip", "cmd": "show rib route ip [vrf vrf_name][prefix][route_type]", "desc": "The show rib route ip command displays a list of IPv4 Routing Information Base (RIB) routes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show rib route fib policy excluded", "cmd": "show rib route [ipv4 | ipv6] fib policy excluded", "desc": "The show rib route fib policy excluded command displays the RIB routes filtered by FIB policy." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show rib route summary", "cmd": "show rib route summary [info_level]", "desc": "The show rib route summary command displays information about the routes present in the Routing Information Base." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show routing-context vrf", "cmd": "show routing-context vrf", "desc": "The show routing-context vrf command displays the context-active VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show snapshot counters ecmp history", "cmd": "show snapshot counters ecmp history", "desc": "The show snapshot counters ecmp history displays information about the AGM configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show tunnel fib static interface gre", "cmd": "show tunnel fib static interface gre number", "desc": "The show tunnel fib static interface gre command displays the Forwarding Information Base (FIB) information for a static interface GRE tunnel." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "show vrf", "cmd": "show vrf [vrf_instance]", "desc": "The show vrf command displays the VRF name, RD, supported protocols, state and included interfaces for the specified VRF or for all VRFs on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "start snapshot counters", "cmd": "start snapshot counters ecmp poll interval interval [milliseconds | microseconds] duration duration\nseconds destination_url", "desc": "The start snapshot counters ecmp allows the monitoring of packets and bytes traversing the members of the configured ECMP groups on the switch with a high time resolution." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "tcp mss ceiling", "cmd": "tcp mss ceiling {ipv4 segment size | ipv6 segment size}{egress | ingress}\nno tcp mss ceiling\ndefault tcp mss ceiling", "desc": "The tcp mss ceiling command configures the Maximum Segment Size (MSS) limit in the TCP header on the configuration mode interface and enables TCP MSS clamping." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "tunnel", "cmd": "tunnel options\nno tunnel options", "desc": "The tunnel command configures options for protocol-over-protocol tunneling." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "vrf (Interface mode)", "cmd": "vrf [vrf_name]\nno vrf [vrf_name]\ndefault vrf [vrf_name]", "desc": "The vrf command adds the configuration mode interface to the specified VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "vrf instance", "cmd": "vrf instance [vrf_name]\nno vrf instance [vrf_name]\ndefault vrf instance [vrf_name]", "desc": "The vrf instance command places the switch in VRF configuration mode for the specified VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "IPv6", "cmd": "IPv6", "desc": "EOS supports Internet Protocol version 4 (IPv4) and Internet Protocol version 6 (IPv6) for routing packets across network boundaries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "IPv6 Description", "cmd": "IPv6 Description", "desc": "Internet Protocol version 6 (IPv6) consists of a communications protocol used for relaying network packets across a set of connected networks using the Internet Protocol suite." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "IPv6 Address Format", "cmd": "IPv6 Address Format", "desc": "IPv6 addresses have 128 bits, represented by eight 16-bit hexadecimal numbers separated by colons." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "IPv6 DHCP Snooping", "cmd": "IPv6 DHCP Snooping", "desc": "Dynamic Host Configuration Protocol (DHCP) snooping is a Layer 2 feature that is configured on LAN switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Neighbor Discovery Protocol", "cmd": "Neighbor Discovery Protocol", "desc": "The Neighbor Discovery Protocol (RFC 4861) operates with IPv6 to facilitate the following tasks for nodes within a specified prefix space: • Auto-configuring a node IPv6 address." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "IPv6 Duplicate Address Detection Proxy", "cmd": "IPv6 Duplicate Address Detection Proxy", "desc": "Overview IPv6 Duplicate Address Detection Proxy ensures that all IPv6 addresses assigned on a network segment are unique." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "IPv6 ECMP", "cmd": "ipv6 hardware fib ecmp resilience 2001:db8:0::/64 capacity 5 redundancy 3", "desc": "Multiple routes configured to the same destination with the same administrative distance comprise an Equal Cost Multi-Path (ECMP) route." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "IPv6 Neighbor Discovery", "cmd": "IPv6 Neighbor Discovery", "desc": "The IPv6 Neighbor Discovery protocol defines a method for nodes to perform the following network maintenance tasks: • Determine Layer 2 addresses for neighbors known to reside on attached links." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Router Advertisement Interval", "cmd": "interface vlan 200", "desc": "The ipv6 nd ra interval command configures the interval between IPv6 RA transmissions from the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "EtherChannel", "title": "Router Advertisement Flag Configuration", "cmd": "Router Advertisement Flag Configuration", "desc": "The following commands set the specified configuration flag in IPv6 RAs transmitted from the configuration mode interface: • The ipv6 nd managed-config-flag command sets the managed address configuration flag." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "IPv6 DHCP Relay Status", "cmd": "interface ethernet 1/2", "desc": "The show ip dhcp relay command displays the status of DHCP relay agent parameters on the switch and each interface where at least one feature parameter is listed." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "IPv6 DHCP Relay Counters", "cmd": "show ipv6 dhcp relay counters", "desc": "The show ipv6 dhcp relay counters command displays the number of DHCP packets received, forwarded, or dropped on the switch and on all interfaces enabled as DHCP relay agents." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "IPv6 Commands", "cmd": "IPv6 Commands", "desc": "Global Configuration Commands • ipv6 dhcp relay always-on • ipv6 dhcp relay option link-layer address • ipv6 hardware fib aggregate-address • ipv6 hardware fib ecmp resilience • ipv6 hardware fib nexthop-index" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "clear ipv6 dhcp relay counters", "cmd": "clear ipv6 dhcp relay counters [port]", "desc": "The clear ipv6 dhcp relay counters command resets the DHCP relay counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "clear ipv6 dhcp snooping counters", "cmd": "clear ipv6 dhcp snooping counters [counter_type]", "desc": "The clear ipv6 dhcp snooping counters command resets the DHCP snooping packet counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "clear ipv6 neighbors", "cmd": "clear ipv6 neighbors [port][dynamic_ipv6]", "desc": "The clear ipv6 neighbors command removes the specified dynamic IPv6 neighbor discovery cache entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "ipv6 address", "cmd": "ipv6 address [ ipv6_address | ipv6_prefix | auto-config ]\nno ipv6 address { ipv6_address | ipv6_prefix | auto-config }\ndefault ipv6 address { ipv6_address | ipv6_prefix | auto-config }", "desc": "The ipv6 address command assigns a global IPv6 address to the IPv6 interface, and defines the prefix length." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ipv6 dhcp relay always-on", "cmd": "ipv6 dhcp relay always-on\nno ipv6 dhcp relay always-on\ndefault ipv6 dhcp relay always-on", "desc": "The iv6p dhcp relay always-on command enables the switch DHCP relay agent on the switch regardless of the DHCP relay agent status on any interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ipv6 dhcp relay destination", "cmd": "ipv6 dhcp relay destination [ipv6_addr][source-address ipv6_addr]\nno ipv6 dhcp relay destination [ipv6_addr]\ndefault ipv6 dhcp relay destination [ipv6_addr]", "desc": "The ipv6 dhcp relay destination command enables the DHCPv6 relay agent and sets the destination address on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ipv6 dhcp relay option link-layer address", "cmd": "ipv6 dhcp relay option link-layer address\nno ipv6 dhcp relay option link-layer address\ndefault ipv6 dhcp relay option link-layer address", "desc": "The ipv6 dhcp relay option link-layer address command enables the DHCPv6 relay agent to configure the client link layer address option to solicit and request messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ipv6 dhcp relay option remote-id", "cmd": "ipv6 dhcp relay option remote-id format {%m:%h:%p | %m:%i | %m:%p}\nno ipv6 dhcp relay option remote-id format {%m:%h:%p | %m:%i | %m:%p}", "desc": "The ipv6 dhcp relay option command configures DHCPv6 Relay Option 37, Remote-ID, to add the MAC address, interface ID or name, and hostname as the remote-id format." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 enable", "cmd": "ipv6 enable\nno ipv6 enable\ndefault ipv6 enable", "desc": "The ipv6 enable command enables IPv6 on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 hardware fib aggregate-address", "cmd": "ipv6 hardware fib aggregate-address ipv6_prefix summary-only software-forward\nno ipv6 hardware fib aggregate-address ipv6_prefix\ndefault ipv6 hardware fib aggregate-address ipv6_prefix", "desc": "The ipv6 hardware fib aggregate-address command specifies the routing table repository of specified IPv6 route." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 hardware fib ecmp resilience", "cmd": "ipv6 hardware fib ecmp resilience net_prfx capacity nhop_max redundancy duplicates\nno ipv6 hardware fib ecmp resilience net_addr\ndefault ipv6 hardware fib ecmp resilience net_addr", "desc": "The ip hardware fib ecmp resilience command configures a fixed number of next hop entries in the hardware ECMP table for the specified IPv6 address prefix." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 hardware fib nexthop-index", "cmd": "ipv6 hardware fib nexthop nxthop_index [PREFIX]\nno ipv6 hardware fib nexthop\ndefault ipv6 hardware fib nexthop", "desc": "The ipv6 hardware fib nexthop-index command deterministically selects the next hop used for ECMP routes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 nd dad proxy", "cmd": "ipv6 nd dad proxy", "desc": "IPv6 DAD Proxy can be configured on an interface, and you must configure an IPv6 address on the interface and then enable IPv6 on the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "ipv6 nd managed-config-flag", "cmd": "ipv6 nd managed-config-flag\nno ipv6 nd managed-config-flag\ndefault ipv6 nd managed-config-flag", "desc": "The ipv6 nd managed-config-flag command causes the managed address configuration flag to be set in IPv6 RA packets transmitted from the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 nd ns-interval", "cmd": "ipv6 nd ns-interval period\nno ipv6 nd ns-interval\ndefault ipv6 nd ns-interval", "desc": "The ipv6 nd ns-interval command configures the interval between IPv6 Neighbor Solicitation (NS) transmissions from the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "ipv6 nd other-config-flag", "cmd": "ipv6 nd other-config-flag\nno ipv6 nd other-config-flag\ndefault ipv6 nd other-config-flag", "desc": "The ipv6 nd other-config-flag command configures the configuration mode interface to send IPv6 RAs with the other stateful configuration flag set." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 nd prefix", "cmd": "ipv6 nd prefix ipv6_prefix LIFETIME [FLAGS]\nipv6 nd prefix ipv6_prefix no-advertise\nno ipv6 nd prefix ipv6_prefix\ndefault ipv6 nd prefix ipv6_prefix", "desc": "The ipv6 nd prefix command configures neighbor discovery Router Advertisements (RAs) prefix inclusion for RAs sent from the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 nd ra disabled", "cmd": "ipv6 nd ra disabled [SCOPE]\nno ipv6 nd ra disabled\ndefault ipv6 nd ra disabled", "desc": "The ipv6 nd ra disabled command suppress IPv6 Router Advertisement (RA) transmissions on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ipv6 nd ra dns-server", "cmd": "ipv6 nd ra dns-server ipv6_addr SERVER_LIFE\nno ipv6 nd ra dns-server ipv6_addr\ndefault ipv6 nd ra dns-server ipv6_addr", "desc": "The ipv6 nd ra dns-server command configures the IPv6 address of a preferred Recursive DNS Server (RDNSS) for the command mode interface to include in its neighbor-discovery Router Advertisements (RAs)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ipv6 nd ra dns-servers lifetime", "cmd": "ipv6 nd ra dns-servers lifetime", "desc": "The ipv6 nd ra dns-servers lifetime command sets the default value that the configuration mode interface uses for the lifetime of any Recursive DNS Server (RDNSS) configured on the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ipv6 nd ra dns-servers lifetime period", "cmd": "ipv6 nd ra dns-servers lifetime period\nno ipv6 nd ra dns-servers lifetime\ndefault ipv6 nd ra dns-servers lifetime", "desc": "not be used for name resolution." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ipv6 nd ra dns-suffix", "cmd": "ipv6 nd ra dns-suffix domain SUFFIX_LIFE\nno ipv6 nd ra dns-suffix ipv6_addr\ndefault ipv6 nd ra dns-suffix ipv6_addr", "desc": "The ipv6 nd ra dns-suffix command creates a DNS Search List (DNSSL) for the command mode interface to include in its neighbor-discovery Router Advertisements as defined in RFC 6106 ." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ipv6 nd ra dns-suffixes lifetime", "cmd": "ipv6 nd ra dns-suffixes lifetime period\nno ipv6 nd ra dns-suffixes lifetime\ndefault ipv6 nd ra dns-suffixes lifetime", "desc": "The ipv6 nd ra dns-suffixes lifetime command sets the default value that the configuration mode interface uses for the lifetime of any DNS Search List (DNSSL) configured on the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 nd ra hop-limit", "cmd": "ipv6 nd ra hop-limit quantity\nno ipv6 nd ra hop-limit lifetime\ndefault ipv6 nd ra hop-limit lifetime", "desc": "The ipv6 nd ra hop-limit command sets a suggested hop-limit value to be included in Router Advertisement (RA) packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 nd ra interval", "cmd": "ipv6 nd ra interval [SCALE] ra_period [minimum_period]\nno ipv6 nd ra interval\ndefault ipv6 nd ra interval", "desc": "The ipv6 nd ra interval command configures the interval between IPv6 Router Advertisement transmissions from the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 nd ra lifetime", "cmd": "ipv6 nd ra lifetime ra_lifetime\nno ipv6 nd ra lifetime\ndefault ipv6 nd ra lifetime", "desc": "The ipv6 nd ra lifetime command specifies the value that the switch places in the router lifetime field of IPv6 Router Advertisements sent from the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "ipv6 nd ra mtu suppress", "cmd": "ipv6 nd ra mtu suppress\nno ipv6 nd ra mtu suppress\ndefault ipv6 nd ra mtu suppress", "desc": "The ipv6 nd ra mtu suppress command suppresses the Router Advertisement (RA) MTU option on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 nd ra rx accept default-route", "cmd": "ipv6 nd ra rx accept default", "desc": "The ipv6 nd ra rx accept default-route command configures the interface to accept the default gateway information from the Router Advertisement (RA) in the interface configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 nd reachable-time", "cmd": "ipv6 nd reachable-time period\nno ipv6 nd reachable-time\ndefault ipv6 nd reachable-time", "desc": "The ipv6 nd reachable-time command specifies the time period that the switch includes in the reachable time field of RAs sent from the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "ipv6 nd router-preference", "cmd": "ipv6 nd router-preference [RANK [high | low | medium]]\nno ipv6 nd router-preference\ndefault ipv6 nd router-preference", "desc": "The ipv6 nd router-preference command specifies the value that the switch enters in the Default Router Preference (DRP) field of Router Advertisements (RAs) that it sends from the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 neighbor cache persistent", "cmd": "ipv6 neighbor cache persistent\nno ipv6 neighbor cache persistent\ndefault ipv6 neighbor cache persistent", "desc": "The ipv6 neighbor cache persistent command restores the IPv6 neighbor cache after reboot." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 neighbor", "cmd": "ipv6 neighbor ipv6_addr PORT mac_addr\nno ipv6 neighbor ipv6_address PORT\ndefault ipv6 neighbor ipv6_addr PORT", "desc": "The ipv6 neighbor command creates an IPv6 neighbor discovery cache static entry." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "ipv6 route", "cmd": "ipv6 route dest_prefix NEXTHOP [DISTANCE][TAG_OPT][RT_NAME]\nno ipv6 route dest_prefix [nexthop_addr][DISTANCE]\ndefault ipv6 route dest_prefix [nexthop_addr][DISTANCE]", "desc": "The ipv6 route command creates an IPv6 static route." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 unicast-routing", "cmd": "ipv6 unicast-routing\nno ipv6 unicast-routing [DELETE_ROUTES]\ndefault ipv6 unicast-routing [DELETE_ROUTES]", "desc": "The ipv6 unicast-routing command enables the forwarding of IPv6 unicast packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 verify", "cmd": "ipv6 verify unicast source reachable-via RPF_MODE\nno ipv6 verify unicast\ndefault ipv6 verify unicast", "desc": "The ipv6 verify command configures Unicast Reverse Path Forwarding (uRPF) for inbound IPv6 packets on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "ipv6 dhcp snooping", "cmd": "ipv6 dhcp snooping [remote-id option | vlan [$ | vlan-range]]\nno ipv6 dhcp snooping [remote-id option | vlan [$ | vlan-range]]\ndefault ipv6 dhcp snooping [remote-id option | vlan [$ | vlan-range]]", "desc": "The ipv6 dhcp snooping command enables DHCP snooping globally on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "pim ipv6 sparse-mode", "cmd": "pim ipv6 sparse-mode\nno pim ipv6\nno pim ipv6 sparse-mode\ndefault pim ipv6\ndefault pim ipv6 sparse-mode", "desc": "The pim ipv6 sparse-mode command enables PIM Sparse Mode (PIM-SM) and IGMP (router mode) on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "show ipv6 dhcp snooping", "cmd": "show ipv6 dhcp snooping", "desc": "The show ipv6 dhcp snooping command displays information about the DHCP snooping configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "show ipv6 dhcp snooping counters", "cmd": "show ipv6 dhcp snooping counters [COUNTER_TYPE]", "desc": "The show ipv6 dhcp snooping counters command displays counters that track the quantity of DHCP request and reply packets that the switch receives." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "show ipv6 dhcp snooping hardware", "cmd": "show ipv6 dhcp snooping hardware", "desc": "The show ipv6 dhcp snooping hardware command displays internal hardware DHCP snooping status on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "show ipv6 hardware fib aggregate-address", "cmd": "show ipv6 address fib aggregate-address [ADDRESS][RESTRICTION]", "desc": "The show ipv6 hardware fib aggregate-address command displays the IPv6 prefixes that are restricted from entry into the hardware routing table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ipv6 interface", "cmd": "show ipv6 interface [INTERFACE_NAME][INFO_LEVEL]", "desc": "The ipv6 interface command displays the status of specified routed interfaces that are configured for IPv6." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ipv6 nd dad proxy", "cmd": "show ipv6 nd dad proxy", "desc": "Display information about the IPv6 Duplicate Address Detection (DAD) feature configured on an interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ipv6 nd ra internal state", "cmd": "show ipv6 nd ra internal state [INTERFACE_NAME]", "desc": "The ipv6 nd ra internal state command displays the state of the IPv6 Router Advertisement (RA) daemon for the specified routable interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ipv6 neighbors", "cmd": "show ipv6 neighbors [PORT][SOURCE][INFO_LEVEL]", "desc": "The show ipv6 neighbors command displays the IPv6 neighbor discovery cache." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "show ipv6 route", "cmd": "show ipv6 route [ADDRESS][ROUTE_TYPE][INFO_LEVEL]", "desc": "The show ipv6 route command displays IPv6 routing table entries that are in the Forwarding Information Base (FIB), including static routes, routes to directly connected networks, and dynamically learned routes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "show ipv6 route age", "cmd": "show ipv6 route ADDRESS age", "desc": "The show ipv6 route age command displays the IPv6 route age to the specified IPv6 address or prefix." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "show ipv6 route host", "cmd": "show ipv6 route host", "desc": "The show ipv6 route host command displays all host routes in the IPv6 host forwarding table." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "show ipv6 route interface", "cmd": "show ipv6 route [ADDRESS] interface PORT_NAME [INFO_LEVEL]", "desc": "The show ipv6 route interface command displays routing table entries on a specified routed port." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "show ipv6 route match tag", "cmd": "show ipv6 route ADDRESS match tag", "desc": "The show ipv6 route match tag command displays the route tag assigned to the specified IPv6 address or prefix." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform fap mroute ipv6", "cmd": "show platform fap mroute ipv6", "desc": "The show platform fap mroute ipv6 command enables PIM Sparse Mode (PIM-SM) and IGMP (router mode) on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show rib route ipv6", "cmd": "show rib route ipv6 [vrf vrf_name] [PREFIX][ROUTE TYPE]", "desc": "The show rib route ipv6 command displays a list of IPv6 Routing Information Base (RIB) routes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "hardware counter feature ip", "cmd": "hardware counter feature ip in|out layer3\nno hardware counter feature ip in|out layer3\ndefault hardware counter feature in|out layer3", "desc": "Use the hardware counter feature ip command to enable ingress and egress counters at Layer 3." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ACL Types", "cmd": "ACL Types", "desc": "The switch supports the following ACL types: • IPv4 matches on IPv4 source or destination addresses, with L4 modifiers including protocol, port number, IPsec tunnel interfaces, and DSCP value." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ACL Structure", "cmd": "ACL Structure", "desc": "An ACL is an ordered list of rules that defines access restrictions for the entities (the control plane or an interface) to which it is applied." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ACL Rules", "cmd": "ACL Rules", "desc": "The switch compares an ACL rule's command list to inbound and outbound packet fields." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ACL Rule Tracking", "cmd": "ACL Rule Tracking", "desc": "ACL rule tracking determines how ACL rules impact traffic on the interfaces where those rules are applied." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ACL Configuration", "cmd": "ACL Configuration", "desc": "You create and modify Access Control Lists (ACLs) in an ACL-configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ACL Rule Tracking Configuration", "cmd": "15 permit ip 10.30.10.0/24 host 10.20.10.1 log", "desc": "ACL Rules provide a log option that produces a syslog message about the packets matching a desired packet." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "SNMP Server", "cmd": "snmp-server community community-name [view viewname] [ro | rw] acl_name", "desc": "Use the snmp-server community command to apply the SNMP Server Service ACLs to restrict which hosts can access SNMP services on the switch:" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP", "cmd": "BGP", "desc": "Use the ip access-group (Service ACLs) and ipv6 access-group (Service ACLs) commands to apply Service ACLs for controlling connections to the BGP routing protocol agent: switch(config)# router bgp " }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "OSPF", "cmd": "router ospf ", "desc": "Use the ip access-group (Service ACLs) and ipv6 access-group (Service ACLs) commands to apply Service ACLs to control packets processed by the OSPF routing protocol agent:" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "PIM", "cmd": "PIM", "desc": "Use the access-group command to apply Service ACLs for controlling packets processed by the PIM routing protocol agent: switch(config)# router pim switch(config-router-pim)# ipv4 switch(config-router-pim-ipv4)# access-group " }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "IGMP", "cmd": "IGMP", "desc": "Use the ip igmp access-group command to apply Service ACLs for controlling packets processed by the IGMP management protocol agent: switch(config)# router igmp switch(config-router-igmp)# ip igmp access-group " }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "LDP", "cmd": "LDP", "desc": "Use the ip access-group (Service ACLs) to apply Service ACLs for controlling packets and connections processed by the LDP MPLS label distribution protocol: switch(config)# mpls ldp switch(config-mpls-ldp)# ip access-group " }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "MPLS Ping and Traceroute", "cmd": "MPLS Ping and Traceroute", "desc": "Use the ip access-group (Service ACLs) and ipv6 access-group (Service ACLs) commands to apply Service ACLs for controlling connections accepted by the MPLS Ping agent: switch(config)# mpls ping switch(config-mpls-ping)# ip access-group [vr…" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "active", "cmd": "active", "desc": "Sub-interface ACLs Limitations The sub-interface ACLs feature contains the following limitations: • Egress IPv4 ACLs on subinterfaces are not supported when sharing mode is disabled for Egress IPv4 RACLs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Route Maps", "cmd": "Route Maps", "desc": "A route map is an ordered set of rules that controls the redistribution of IP routes into a protocol domain based on criteria such as route metrics, access control lists, next-hop addresses, and route tags." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Route Map Description", "cmd": "route-map MAP_1 permit 10", "desc": "Route maps are composed of route map statements, each consisting of a list of match and set commands." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Route Map Configuration", "cmd": "Route Map Configuration", "desc": "Route maps are created and modified in route-map configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Route Map Creation and Editing", "cmd": "route-map map1 permit 50", "desc": "Creating a Route Map Statement To create a route map, use the route-map command, including the map name and filter type (deny or permit)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Prefix Lists", "cmd": "Prefix Lists", "desc": "A prefix list is an ordered set of rules that defines route redistribution access for a specified IP address space." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Prefix List Configuration", "cmd": "Prefix List Configuration", "desc": "A prefix list is an ordered set of rules that defines route redistribution access for a specified IP address space." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "IPv6 Prefix Lists", "cmd": "ipv6 prefix-list map1", "desc": "Creating an IPv6 Prefix List The switch provides an IPv6 prefix-list configuration mode for creating and modifying IPv6 prefix lists." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Static", "title": "Static Routes Redistribution into IGPs", "cmd": "Static Routes Redistribution into IGPs", "desc": "Use match ip next-hop to match against next-hops in a route-map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Static", "title": "is a configured next-hop for static route 10.20.30.0/24.", "cmd": "is a configured next-hop for static route 10.20.30.0/24.", "desc": "The following commands configure a route map: switch(config)# route-map routeMapName switch(config-route-map-routeMapName)# match ip next-hop prefix-list prefixListName For example, based on the route-map mentioned in the preceding command, to redist…" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Port ACLs with User-Defined Fields", "cmd": "Port ACLs with User-Defined Fields", "desc": "Describes the support for specifying User-Defined Fields (UDF) in Port ACLs, including IPv4, IPv6, and MAC ACLs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "IPv6 Port ACL", "cmd": "IPv6 Port ACL", "desc": "The following configurations create a new profile based on the default profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Port ACLs with User-Defined Fields Limitations", "cmd": "Port ACLs with User-Defined Fields Limitations", "desc": "User-defined fields consume a limited set of copy resources." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "clear ip access-lists counters", "cmd": "clear ip access-lists counters acl_name scope", "desc": "The clear ip access-lists counters command sets ACL counters to zero for the specified IPv4 Access Control List (ACL)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "clear ipv6 access-lists counters", "cmd": "clear ipv6 access-lists counters [acl_name][scope]", "desc": "The clear ipv6 access-lists counters command sets ACL counters to zero for the specified IPv6 Access Control List (ACL)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "continue (route map)", "cmd": "continue next_seq\nno continue next_seq\ndefault continue next_seq", "desc": "The continue command creates a route map statement entry that enables additional route map evaluation of routes with parameters meeting the statement matching criteria." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "counters per-entry", "cmd": "counters per-entry\nno counters per-entry\ndefault counters per-entry", "desc": "The counters per-entry command places the ACL in counting mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "deny (IPv4 ACL)", "cmd": "dscp_filter ttl_filter log\nno deny protocol source_addr source_port dest_addrR dest_port flags message fragments tracked\ndscp_filter ttl_filter log]\ndefault deny protocol source_addr source_port dest_addrR dest_port flags message fragments tracked\ndscp_filter ttl_filter log]\nprotocol.", "desc": "The deny command adds a deny rule to the configuration mode IPv4 Access Control List (ACL)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "deny (IPv6 ACL)", "cmd": "seq_num deny protocol src_addr source_pt dest_addr dest_pt flag msg hop tracked dscp_filter log\nno deny protocol src_addr source_pt dest_addr dest_pt flag msg hop tracked dscp_filter log\ndefault deny protocol src_addr source_pt dest_addr dest_pt flag msg hop tracked dscp_filter log\nprotocol. Use CLI syntax assistance to view parameters for specific protocols when creating a\ndeny rule.", "desc": "The deny command adds a deny rule to the an IPv6 Access Control List (ACL)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "deny (IPv6 Prefix List)", "cmd": "sequence deny ipv6_prefix mask", "desc": "The deny command adds a deny rule in the IPv6 Prefix List Configuration Mode ." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "deny (MAC ACL)", "cmd": "seq_num deny source_addr dest_addr [protocol][log]\nno deny source_addr dest_addr [protocol][log]\ndefault deny source_addr dest_addr [protocol][log]", "desc": "The deny command adds a deny rule to the MAC Access Control List (ACL) Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "deny (Standard IPv4 ACL)", "cmd": "no deny source_addr log\ndefault deny source_addr log", "desc": "The deny command adds a deny rule to the Standard IPv4 Access Control List (ACL) Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "deny (Standard IPv6 ACL)", "cmd": "seq_num deny source_addr\nno deny source_addr\ndefault deny source_addr", "desc": "The deny command adds a deny rule to the Standard IPv6 Access Control List (ACL) Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "hardware access-list resource sharing vlan in", "cmd": "hardware access-list resource sharing vlan [ipv4 | ipv6] in\nno hardware access-list resource sharing vlan in\nprocess and impacts traffic forwarding.", "desc": "The hardware access-list resource sharing vlan in command enables the IPv4 Ingress Sharing of hardware resources on the switch when the same ACL applies to different VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "hardware access-list resource sharing vlan ipv4 out", "cmd": "hardware access-list resource sharing vlan ipv4 out\nno hardware access-list resource sharing vlan ipv4 out\nprocess and impacts traffic forwarding.\nsharing for egress IPv4 RACLs is enabled.", "desc": "The hardware access-list resource sharing vlan ipv4 out command enables IPv4 Egress RACL TCAM sharing on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "hardware access-list update default-result permit", "cmd": "hardware access-list update default-result permit\nno hardware access-list update default-result permit\ndefault hardware access-list update default-result permit\nseries switches.", "desc": "The hardware access-list update default-result permit command configures the switch to permit all traffic on Ethernet and VLAN interfaces with ACLs applied to them while modifying the ACLs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "hardware counter feature acl out", "cmd": "hardware counter feature acl out [options [ipv4 | ipv6]\nno hardware counter feature acl out [options [ipv4 | ipv6]\ndefault hardware counter feature acl out [options [ipv4 | ipv6]", "desc": "The hardware counter feature acl out command enables egress ACL hardware counters for IPv4 or IPv6 and count the number of packets matching rules associated with egress ACLs applied to various interfaces on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "ip access-group (Service ACLs)", "cmd": "ip access-group acl_name [vrfvrf_name][in]\nno ip access-group acl_name [vrfvrf_name][in]\ndefault ip access-group acl_name [vrfvrf_name][in]", "desc": "The ip access-group (Service ACLs) command configures a Service ACL to apply to a control-plane service." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "ip access-group", "cmd": "ip access-group list_name [direction [in | out]]\nno ip access-group list_name [direction [in | out]]\ndefault ip access-group list_name [direction [in | out]]", "desc": "The ip access-group command applies an IPv4 or standard IPv4 Access Control List (ACL) to an interface or subinterface in the Interface Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "ip access-list", "cmd": "ip access-list list_name\nno ip access-list list_name\ndefault ip access-list list_name", "desc": "The ip access-list command places the switch in ACL Configuration Mode, a group change mode that modifies an IPv4 access control list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "ip access-list standard", "cmd": "ip access-list standard list_name\nno ip access-list standard list_name\ndefault ip access-list standard list_name", "desc": "The ip access-list standard command places the switch in STD-ACL Configuration Mode, a group change mode that modifies a standard IPv4 access control list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip prefix-list", "cmd": "ip prefix-list list_name [deny | permit] [seq index] network_addr [mask] resequence\nseq_number remark comment\nno ip prefix-list list_name seq [index]\ndefault ip prefix-list list_name seq [index]", "desc": "The ip prefix-list command creates a prefix list or adds an entry to an existing list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "ipv6 access-group", "cmd": "ipv6 access-group list_name [in | out]\nno ipv6 access-group list_name [in | out]\ndefault ipv6 access-group list_name [in | out]", "desc": "The ipv6 access-group command applies an IPv6 or standard IPv6 Access Control List (ACL) to the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "ipv6 access-group (Service ACLs)", "cmd": "ipv6 access-group ipv6_acl_name [vrf vrf_name][in]\nno ipv6 access-group [ipv6_acl_name][vrfvrf_name][in]\ndefault ipv6 access-group ipv6_acl_name [vrf vrf_name][in]", "desc": "The ipv6 access-group (Service ACLs) command configures an IPv6 or standard IPv6 Service ACL to be applied by a control-plane service." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "ipv6 access-list", "cmd": "ipv6 access-list list_name\nno ipv6 access-list list_name\ndefault ipv6 access-list list_name", "desc": "The ipv6 access-list command places the switch in IPv6-ACL Configuration Mode, a group change mode that modifies an IPv6 access control list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "ipv6 access-list standard", "cmd": "ipv6 access-list standard list_name\nno ipv6 access-list standard list_name\ndefault ipv6 access-list standard list_name", "desc": "The ipv6 access-list standard command places the switch in std-IPv6-ACL-configuration mode, a group change mode that modifies a standard IPv6 access control list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ipv6 prefix-list", "cmd": "ipv6 prefix-list list_name\nno ipv6 prefix-list list_name\ndefault ipv6 prefix-list list_name", "desc": "The ip prefix-list command places the switch in IPv6 prefix-list configuration mode, which is a group change mode that modifies an IPv6 prefix list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "mac access-group", "cmd": "mac access-group list_name [direction [in | out]]\nno mac access-group list_name[direction [in | out]]\ndefault mac access-group list_name [direction [in | out]]", "desc": "The mac access-group command applies a MAC Access Control List (MAC ACL) when in the Interface Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "mac access-list", "cmd": "mac access-list list_name\nno mac access-list list_name\ndefault mac access-list list_name", "desc": "The mac access-list command places the switch in MAC-ACL Configuration Mode, a group change mode that modifies a MAC access control list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "match (route-map)", "cmd": "match condition\nno match condition\ndefault match condition", "desc": "The match command creates a route map statement entry that specifies one route filtering command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "no sequence number", "cmd": "no line_num\ndefault line_num", "desc": "The no sequence number command removes the rule with the specified sequence number from the ACL." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "permit (IPv4 ACL)", "cmd": "seq_num permit protocol src_addr source_pt dest_addr dest_pt flags msg fragments tracked\ndscp_filter ttl_filter log\nno permit protocol src_addr source_pt dest_addr dest_pt flags msg fragments tracked dscp_filter\nttl_filter log\ndefault permit protocol src_addr source_pt dest_addr dest_pt flags msg fragments tracked\ndscp_filter ttl_filter log", "desc": "The permit command adds a permit rule to the configuration mode IPv4 Access Control List (ACL)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "permit (IPv6 Prefix List)", "cmd": "seq_num permit ipv6_prefix mask", "desc": "The permit command adds a rule to the configuration mode IPv6 prefix list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "permit (MAC ACL)", "cmd": "seq_num permit source_addr dest_addr protocol log\nno permit source_addr dest_addr protocol log\ndefault permit source_addr dest_addr protocol log", "desc": "The permit command adds a permit rule to the configuration mode MAC access control list packets through the interface to which the list is applied." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "permit (Standard IPv4 ACL)", "cmd": "no permit [ source_addr network_addr [any | host] [log]\ndefault permit [ source_addr network_addr [any | host][log]", "desc": "The permit command adds a permit rule to a standard IPv4 Access Control List (ACL)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "permit (Standard IPv6 ACL)", "cmd": "no permit source_addr\ndefault permit source_addr", "desc": "The permit command adds a permit rule to the standard IPv6 access control list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "remark", "cmd": "remark text\nline_num remark [text]\nno remark text\ndefault remark text", "desc": "The remark command adds a non-executable comment statement into the pending ACL." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "route-map", "cmd": "route-map map_name [filter_type] [sequence_number]\nno route-map map_name [filter_type] [sequence_number]\ndefault route-map map_name [filter_type][sequence_number]", "desc": "The route-map command places the switch in Route-Map Configuration Mode, a group change mode that modifies a route map statement." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "no seq (IPv6 Prefix Lists)", "cmd": "no seq line_num\ndefault seq line_num", "desc": "The no seq command removes the rule with the specified sequence number from the ACL." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "set (route-map)", "cmd": "set condition [as-path prepend [num | auto]]\nno set condition [as-path prepend [num | auto]]\ndefault set condition [as-path prepend [num | auto]]", "desc": "The set command specifies modifications to routes selected for redistribution by the Route-Map Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "set as-path match", "cmd": "set as-path match [all replacement [none| auto]] as_path\nset as-path match[all replacement [none| auto]] as_path", "desc": "The set as-path match command configures the as_path attribute for prefixes either received from a BGP neighbor or advertised to a BGP neighbor in the Route-Map Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "set as-path prepend", "cmd": "set as-path prepend auto | as_number [auto | as_number | last-as count]\nno set as-path prepend auto | as_number [auto | as_number | last-as count]\ndefault set as-path prepend auto | as_number [auto | as_number | last-as count]", "desc": "The set as-path prepend command adds a set statement to a route map to prepend one or more Autonomous System (AS) numbers to the as_path attribute of a BGP route." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "set community (route-map)", "cmd": "show active", "desc": "The set community command specifies community attribute modifications to routes selected for redistribution." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "set extcommunity (route-map)", "cmd": "set extcommunity cond_x [cond_2][cond_n][mod_type]\nset extcommunity none\nno set extcommunitycond_x [cond_2][cond_n][mod_type]\ndefault set extcommunity cond_x [cond_2][cond_n][mod_type]\ndefault set extcommunity none", "desc": "The set extcommunity command specifies extended community attribute modifications to routes selected for redistribution." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show (ACL configuration modes)", "cmd": "show\nshow active\nshow comment\nshow diff\nshow pending", "desc": "The show command displays the contents of an Access Control List (ACL)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show hardware tcam profile", "cmd": "show hardware tcam profile [[profileName [[feature featureName] detail]]|[detail]", "desc": "The show hardware tcam profile command displays the hardware specific information for the current operational TCAM profile in the running configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "show access-lists", "cmd": "show access-lists [interface interface_acl] | [acl_name acl_name] acl_name | [scope summary]", "desc": "The show access-lists command displays the contents of all IPv4, IPv6, and MAC Access Control Lists (ACLs) on the switch in addition to the configuration and status." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "show ip access-lists", "cmd": "show ip access-lists [interface interface_ipv4]|[acl_name acl_name] | [scope summary]", "desc": "The show ip access-lists command displays the contents of IPv4 and standard IPv4 Access Control List (ACLs) on the switch with the configuration and status." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "show ip prefix-list", "cmd": "show ip prefix-list [display_items list_name]", "desc": "The show ip prefix-list command displays all rules for the specified IPv4 prefix list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "show ipv6 access-lists", "cmd": "show ipv6 access-lists [ interface interface_ipv6] [supplicant supplicant][acl_name acl_name][scope", "desc": "The show ipv6 access-lists command displays the contents of all IPv6 Access Control Lists (ACLs) on the switch with the configuration and status." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "show ipv6 prefix-list", "cmd": "show ipv6 prefix-list [display_items list_name]", "desc": "The show ipv6 prefix-list command displays all rules for the specified IPv6 prefix list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "show mac access-lists", "cmd": "show mac access-lists [interface interface_acl] [acl_name acl_name] [scope summary]", "desc": "The show mac access-lists command displays the contents of all MAC Access Control Lists (ACLs) on the switch, along with their configuration and status." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform arad acl tcam summary", "cmd": "show platform arad acl tcam summary", "desc": "The show platform arad tcam summary command displays the percentage of TCAM utilization per forwarding ASIC." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform arad acl tcam", "cmd": "show platform arad acl tcam [scope [detail | diff | hw | shadow | summary]", "desc": "The show platform arad acl tcam command displays the number of TCAM entries (hardware resources) occupied by the ACL on each forwarding ASIC." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show platform arad mapping", "cmd": "show platform arad chip_name mapping", "desc": "The show platform arad mapping command displays the mapping between the interfaces and the forwarding ASICs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform fap acl", "cmd": "show platform fap acl mirroring", "desc": "The show platform fap acl command displays the ACL information of Sand platform devices." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform fap acl tcam", "cmd": "show platform fap acl tcam [detail | diff | hw | shadow | summary]", "desc": "The show platform fap tcam command displays the number of TCAM entries (hardware resources) occupied by the ACL on each forwarding ASIC of Sand platform devices." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform fap acl tcam hw", "cmd": "show platform fap fap_name acl tcam hw", "desc": "The show platform fap acl tcam hw command displays the TCAM entries configured for each TCAM bank including policy-maps and corresponding traffic match." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform fap acl tcam summary", "cmd": "show platform fap acl tcam summary", "desc": "The show platform fap acl tcam summary command displays for each forwarding ASIC, the number of TCAM entries consumed per ACL type, and in which TCAM bank the entries are installed." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "show platform trident tcam", "cmd": "qos | shared | summary]", "desc": "The show platform trident tcam command displays the TCAM entries configured for each TCAM group including policy maps and corresponding hits." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Permit", "cmd": "Permit", "desc": "ACL, Route Map, and Prefix List Commands" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Deny", "cmd": "Deny", "desc": "*" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "show route-map", "cmd": "show route-map [map_name]", "desc": "The show route-map command displays the contents of configured route maps." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "system profile", "cmd": "default system profile\nno system profile", "desc": "The system profile command creates a new Ternary Content-Addressable Memory (TCAM) profile in the running configuration." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "System", "title": "up", "cmd": "show ipv6 virtual-router", "desc": "up up up up up switch# Show IPv6 Virtual-Router The show ipv6 virtual-router command displays the virtual MAC address assigned to the switch and all virtual IPv6 addresses assigned to each VLAN interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "ip fhrp accept-mode", "cmd": "ip fhrp accept-mode\nno ip fhrp accept-mode\ndefault ip fhrp accept-mode", "desc": "The ip fhrp accept-mode command configures the switch to permit SSH access to the VRRP Master and VARP Master router." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "HA", "title": "ip virtual-router address", "cmd": "ip virtual-router address ipv4_addr\nno ip virtual-router address [ipv4_addr]\ndefault ip virtual-router address [ipv4_addr]", "desc": "The ip virtual-router address command assigns a virtual IPv4 address to the VLAN interface being configured." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "HA", "title": "ip virtual-router mac-address", "cmd": "ip virtual-router mac-address [mac_addr]\nno ip virtual-router mac address [mac_addr]", "desc": "The ip virtual-router mac-address command assigns a virtual MAC address to the switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "HA", "title": "ip virtual-router mac-address advertisement-interval", "cmd": "ip virtual-router mac-address advertisement-interval period\nno ip virtual-router mac-address advertisement-interval\ndefault ip virtual-router mac-address advertisement-interval", "desc": "The ip virtual-router mac-address advertisement interval command specifies the period between the transmission of consecutive gratuitous ARP requests that contain the virtual router mac address for each virtual-router IP address configured on the switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "HA", "title": "ipv6 virtual-router address", "cmd": "ipv6 virtual-router address net_addr\nno ipv6 virtual-router address [net_addr]\ndefault ipv6 virtual-router address [net_addr]", "desc": "The ipv6 virtual-router address command assigns a virtual IPv6 address to the VLAN interface being configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "no vrrp", "cmd": "no vrrp group\ndefault vrrp group", "desc": "The no vrrp command removes all VRRP configuration commands for the specified virtual router on the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "HA", "title": "show ip virtual-router", "cmd": "show ip virtual-router", "desc": "The show ip virtual-router command displays the virtual MAC address assigned to the switch and all virtual IP addresses assigned to each VLAN interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "show vrrp", "cmd": "show vrrp [INFO_LEVEL] [STATES]\nshow vrrp INTF GROUP_NUM [INFO_LEVEL] [STATES]\nshow vrrp GROUP_NUM INTF_GROUP [INFO_LEVEL] [STATES]", "desc": "The show vrrp command displays information about the Virtual Router Redundancy Protocol (VRRP) groups configured on a specified interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp advertisement interval", "cmd": "vrrp group advertisement interval adv_time\nno vrrp group advertisement interval\ndefault vrrp group advertisement interval", "desc": "The vrrp advertisement interval command configures the interval between successive advertisement messages that the switch sends to VRRP routers in the specified virtual router group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp disabled", "cmd": "vrrp group disabled\nno vrrp group disabled\ndefault vrrp group disabled", "desc": "The vrrp disabled command places the switch in stopped state for the specified virtual router." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp ipv4", "cmd": "vrrp group ipv4 ipv4_address\nno vrrp group ipv4 ipv4_address\ndefault vrrp group ipv4 ipv4_address", "desc": "The vrrp ipv4 command configures the primary IP address for the specified VRRP virtual router." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp ipv4 checksum pseudo-header exclude", "cmd": "vrrp group ipv4 checksum pseudo-header exclude\nno vrrp group ipv4 checksum pseudo-header exclude", "desc": "This command excludes the pseudo-header in IPv4 VRRPv3 checksum calculation on the VRRP group on the configuration mode interface of the switch and supports IPv4 VRRPv3 interoperability." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp ipv4 secondary", "cmd": "vrrp group ipv4 ipv4_addr secondary\nno vrrp group ipv4 ipv4_addr secondary\ndefault vrrp group ipv4 ipv4_addr secondary", "desc": "The vrrp ipv4 secondary command assigns a secondary IP address to the specified virtual router." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp ipv4 version", "cmd": "vrrp group ipv4 version VERSION_NUMBER\nno vrrp group ipv4 version\ndefault vrrp group ipv4 version", "desc": "The vrrp ipv4 version command enables VRRP on the configuration mode interface and configures the VRRP version for the specified VRRP virtual router." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp ipv6", "cmd": "vrrp group ip ipv6_address\nno vrrp group ip ipv6_address\ndefault vrrp group ip ipv6_address", "desc": "The vrrp ipv6 command configures the IPv6 address for the specified VRRP virtual router." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp mac-address advertisement-interval", "cmd": "vrrp group mac-address advertisement-interval period\nno vrrp group mac-address\ndefault vrrp group mac-address", "desc": "The vrrp mac-address advertisement-interval command specifies the interval between advertisement packets sent by the master router to the VRRP group members." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "vrrp peer authentication", "cmd": "vrrp group peer authentication AUTH_PARAMETER\nno vrrp group peer authentication\ndefault vrrp group peer authentication", "desc": "The vrrp peer authentication command configures parameters the switch uses to authenticate virtual router packets it receives from other VRRP routers in the group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp preempt", "cmd": "vrrp group preempt\nno vrrp group preempt\ndefault vrrp group preempt", "desc": "The vrrp preempt command controls a virtual routers preempt mode setting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp preempt delay", "cmd": "vrrp group preempt delay [MINIMUM_INTERVAL] [RELOAD_INTERVAL]\nno vrrp group preempt delay [DELAY_TYPE]\ndefault vrrp group preempt delay [DELAY_TYPE]", "desc": "The vrrp preempt delay command specifies the interval between a VRRP preemption event and the point when the switch becomes the master VRRP router." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp priority-level", "cmd": "vrrp group priority-level level\nno vrrp group priority-level level\ndefault vrrp group priority-level level", "desc": "The vrrp priority-level command configures the switchs priority setting for a VRRP virtual router." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp session description", "cmd": "vrrp group session description label_text\nno vrrp group session description\ndefault vrrp group session description", "desc": "The vrrp session description command associates a text string to a VRRP virtual router on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp timers delay reload", "cmd": "vrrp group timers delay reload [INTERVAL]\nno vrrp group timers delay reload\ndefault vrrp group timers delay reload", "desc": "The vrrp timers delay reload command delays the time for VRRP initialization after a system reboot." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp tracked-object", "cmd": "vrrp group tracked-object object_name ACTION amount\nno vrrp group tracked-object object_name ACTION\ndefault vrrp group tracked-object object_name ACTION", "desc": "The vrrp tracked-object command configures the VRRP client process on the configuration mode interface to track the specified tracked object and react when its status changes to down." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "action drop (DirectFlow-flow mode)", "cmd": "action drop\nno action drop\ndefault action drop", "desc": "The action drop command configures packets that match an entry to be dropped." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "action mirror (DirectFlow-flow mode)", "cmd": "action DIRECTION mirror INT_NAME\nno action DIRECTION mirrorINT_NAME\ndefault action DIRECTION mirror INT_NAME", "desc": "The action mirror command can be used to ingress or egress mirror traffic to a mirror destination." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "action output (DirectFlow-flow mode)", "cmd": "action output DESTINATION\nno action output DESTINATION\ndefault action output DESTINATION", "desc": "The action output command configures an Ethernet or port channel interface as the output of a specified port mirroring session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "action set (DirectFlow-flow mode)", "cmd": "action set CONDITION\nno action set CONDITION\ndefault action set CONDITION", "desc": "The action set command allows you to configure a packet to be routed out a layer three interface using a DirectFlow entry." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "directflow", "cmd": "directflow\nno directflow\ndefault directflow", "desc": "The directflow command places the switch in DirectFlow configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "flow (DirectFlow)", "cmd": "flow flow_name\nno flow flow_name\ndefault flow flow_name", "desc": "The flow command places the switch in flow configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "persistent", "cmd": "persistent\nno persistent", "desc": "DirectFlow flows are persistent by default." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "priority (DirectFlow-flow mode)", "cmd": "priority priority_value\nno priority\ndefault priority", "desc": "The priority command sets the priority for the flow match rules." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show directflow", "cmd": "show directflow [counters | details]", "desc": "The show directflow command displays summary information for DirectFlow." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show directflow flows", "cmd": "show directflow flows [flow_name [counters | detail]]", "desc": "The show directflow flows command displays the contents of the flow table, showing each entry with its match rules, actions, and packet counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "timeout (DirectFlow-flow mode)", "cmd": "timeout [hard | idle]\nno timeout", "desc": "The timeout command, in DirectFlow mode, command configures the connection timeout period for connection sessions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Decap Groups", "cmd": "Decap Groups", "desc": "These sections describe the Decap Groups features: • Decap Groups Overview • Configuring Decap Groups • Configuring Generic UDP Encapsulation (GUE) Decap Groups • Decap Groups Commands" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Decap Groups Overview", "cmd": "Decap Groups Overview", "desc": "The Decap Group feature provides a data structure that receives encapsulated packets and extracts the payload." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Decap Groups Commands", "cmd": "Decap Groups Commands", "desc": "Decap Groups Configuration Commands • ip decap-group • tunnel decap-interface • tunnel decap-ip • tunnel type Decap Groups Show Command • show ip decap-group" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "ip decap-group", "cmd": "ip decap-group group_name\nno ip decap-group group_name\ndefault ip decap-group group_name", "desc": "The ip decap-group command places the switch in decap-group configuration mode which permits the creation or modification of Decap Groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip decap-group", "cmd": "show ip decap-group [decap-group name | dynamic]", "desc": "The show ip decap-group command displays the IP decap groups available on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "tunnel decap-interface", "cmd": "no tunnel decap-interface {Ethernet | Loopback | Management | Port-Channel | Tunnel | Vlan |\nVXLAN | all}\ndefault tunnel decap-interface{Ethernet | Loopback | Management | Port-Channel | Tunnel | Vlan", "desc": "The tunnel decap-interface command adds all locally configured IP addresses to the specific Layer 3 interface per Decap Group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "tunnel decap-ip", "cmd": "tunnel decap-ip [ipv4_address | ipv6_address]", "desc": "The tunnel decap-ip command specifies the IP address of packets handled by the Decap-Group Configuration Mode for the Decap Group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "tunnel type", "cmd": "tunnel type gre", "desc": "The tunnel type command specifies the tunnel protocol for extracting payload from encapsulated packets that arrive on the IP address specified for the configuration mode decap group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Nexthop Groups", "cmd": "Nexthop Groups", "desc": "These sections describe the Nexthop groups: • Next-hop Group Description • Next-hop Group Configuration • Nexthop Group Commands" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Next-hop Group Description", "cmd": "Next-hop Group Description", "desc": "Each routing table entry provides the next hop address to a specified destination." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Next-hop Group Configuration", "cmd": "Next-hop Group Configuration", "desc": "Next-hop groups are configured and modified in next-hop-group configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Segment Security", "cmd": "Segment Security", "desc": "• Overview of MSS-Group • Configuring MSS-Group • Segment Security Considerations • Show Commands • Segment Security Commands" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Segment Security Considerations", "cmd": "Segment Security Considerations", "desc": "• Multicast and Link-Local prefixes are not supported." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Segment Security Commands", "cmd": "Segment Security Commands", "desc": "Global Configuration Commands • match-list input • router segment-security Match-List Input Configuration Commands • match (match-list input) Router Segment-Security Configuration Commands • segment policy policy-drop-all default" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "clear segment-security hardware counters", "cmd": "clear segment-security hardware counters", "desc": "The clear segment-security hardware command clears the MSS-Group (segment security) Hit and Drop counters for all hits, and the hits and drops for each separate segment's policy." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "definition (segment)", "cmd": "definition\nno definition\ndefault definition\nmatch (segment definition)", "desc": "The definition command enters Router Segment-Security VRF Segment Definition Configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from (segment policies)", "cmd": "from segment_name policy [ policy-drop-all | policy-forward-all]\nno from segment_name [policy [ policy-drop-all | policy-forward-all]\ndefault from segment_name [policy [ policy-drop-all | policy-forward-all]", "desc": "The from command adds a policy to a segment in order to filter traffic from a specified segment, either the same segment or a different segment." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "match-list input", "cmd": "match-list input [prefix-ipv4 | prefix-ipv6] match_list_name\nno match-list input [prefix-ipv4 | prefix-ipv6] match_list_name\nno match-list input [prefix-ipv4 | prefix-ipv6] match_list_name", "desc": "The match-list input command enters Match List Configuration mode for the specified match list, creating one if it does not exist." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "match (match-list input)", "cmd": "match [prefix-ipv4 | prefix-ipv6]ip_address_prefix\nno match [prefix-ipv4 | prefix-ipv6] ip_address_prefix\ndefault match [prefix-ipv4 | prefix-ipv6] ip_address_prefix", "desc": "The match command adds an entry to a match list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "match (segment definition)", "cmd": "match [prefix-ipv4 | prefix-ipv6] match_list_name\nno match [prefix-ipv4 | prefix-ipv6] match_list_name\ndefault match [prefix-ipv4 | prefix-ipv6] match_list_name", "desc": "The match command adds a match list to a segment definition." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "policies (segment)", "cmd": "policies\nno policies\ndefault policies", "desc": "The policies command places the switch in Router Segment Security VRF Segment Policies Configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "router segment-security", "cmd": "router segment-security\nno router segment-security\ndefault router segment-security\nsegment\nshutdown\nvrf", "desc": "The router segment-security command enters Router Segment-Security Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "segment", "cmd": "segment segment_name\nno segment segment_name\ndefault segment segment_name", "desc": "The segment command enters Router Segment-Security VRF Segment Configuration mode, creating a segment if one does not exist." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "segment policy policy-drop-all default", "cmd": "segment policy policy-drop-all default\nno segment policy policy-drop-all default\ndefault segment policy policy-drop-all default", "desc": "The segment policy policy-drop-all default command configures the switch to drop all traffic to all segments." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show match-list", "cmd": "show match-list [prefix-ipv4 | prefix-ipv6] [list-name]", "desc": "The show match-list command displays match lists of type IPv4 or IPv6." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show segment-security", "cmd": "show segment-security [[[vrf vrf_name]|[segment seg_name]|[application [application_name]|", "desc": "The show segment-security command shows the status and configuration of MSS-Group (segment security)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show segment-security hardware", "cmd": "show segment-security hardware [summary | detail | routes | counters][vrf vrf-name][segment segname]", "desc": "The show segment-security hardware command displays detailed information about the hardware resources used by the MSS-Group feature." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show segment-security hardware counters", "cmd": "show segment-security hardware counters [vrf vrf_name]", "desc": "The show segment-security hardware counters command displays the counters for policies in each segment, including the default policies." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show segment-security hardware detail", "cmd": "show segment-security hardware detail [vrf vrf_name][segment seg_name]", "desc": "The show segment-security hardware detail command displays the hardware ID allocated to each segment, the prefixes programmed in hardware for each segment, and the adjacency index used by each prefix as determined from L3 hardware tables." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show segment-security hardware routes", "cmd": "show segment-security hardware routes [vrf vrf-name][segment seg-name]", "desc": "The show segment-security hardware routes command displays the route and type for each programmed prefix in hardware." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show segment-security hardware summary", "cmd": "show segment-security hardware summary [vrf vrf-name][segment seg-name]", "desc": "The show segment-security hardware summary command displays the hardware ID, number of prefixes, and number of successfully programmed prefixes for each VRF and segment specified." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VXLAN Control Service", "cmd": "VXLAN Control Service", "desc": "The VXLAN control service allows hardware VXLAN Tunnel End Points (VTEPs) to share state with each other in order to establish VXLAN tunnels without the need for a multicast control plane." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "Hardware Switch Controller (HSC) Service", "cmd": "Hardware Switch Controller (HSC) Service", "desc": "Traffic between virtual machines which share a physical host (or between virtual machines and the rest of the network) is forwarded by virtual switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "Network Topology Service", "cmd": "Network Topology Service", "desc": "The network topology service gathers information from CVX clients to provide a view of the physical topology of the network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "Static Topology Service", "cmd": "Static Topology Service", "desc": "Static Topology addresses cases where the deployment infrastructure in an OpenStack setup that manages Virtual Machines and Bare Metal servers does not enable LLDP on interfaces connecting hosts to switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "cvc1", "cmd": "cvc1", "desc": "Configuring Network Topology Service" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "cvc2", "cmd": "cvc2", "desc": "Configuring Network Topology Service" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "cvc3", "cmd": "cvc3", "desc": "Configuring Network Topology Service" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "cvc4", "cmd": "cvc4", "desc": "bcf6.85bd.8050 dsj14-rack14-tor1 • This command displays all connections in the topology. switch# show network physical-topology neighbors cvx287.sjc.aristanetworks.com Interface Neighbor Intf Neighbor Host" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "cvx", "cmd": "cvx\nno cvx\ndefault cvx", "desc": "CVX (CloudVision eXtension) aggregates and shares status across a network of physical switches running EOS." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "heartbeat-timeout (CVX)", "cmd": "heartbeat-timeout period\nno heartbeat-timeout\ndefault heartbeat-timeout", "desc": "The heartbeat-timeout command specifies the CVX timeout period." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "management cvx", "cmd": "management cvx\nno management cvx\ndefault management cvx", "desc": "The management cvx command places the switch in mgmt-CVX configuration mode to configure CVX client parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "manager", "cmd": "manager ip_address [port]", "desc": "The manager command configures the IP address of the OVSDB controller for the HSC service, allowing CVX to connect to the controller." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "name-resolution force (CVX-OpenStack)", "cmd": "name-resolution force", "desc": "The name-resolution force command initiates an OpenStack controller function that communicates with the OpenStack Keystone and Nova services to update names of VMs and tenants mapped by the local OpenStack instance." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "ovsdb-shutdown", "cmd": "ovsdb-shutdown\nno ovsdb-shutdown\ndefault ovsdb-shutdown", "desc": "The ovsdb-shutdown command shuts down the OVSDB server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "port (CVX)", "cmd": "port port_number\nno port\ndefault port", "desc": "The port command specifies the TCP port number the CVX server listens on." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "resync-period", "cmd": "resync-period seconds\nno resync-period\ndefault resync-period", "desc": "The resync-period command configures the grace period for completion of synchronization between the VXLAN control service and clients after a CVX restart." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "server host (Management-CVX)", "cmd": "server host host\nno server host\ndefault server host", "desc": "The server host command configures the IP address or host name of the CVX server to which the CVX client device connects." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "service hsc", "cmd": "service hsc", "desc": "The service hsc command enters the CVX-HSC configuration mode where the HSC service is enabled and configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "service openstack", "cmd": "service openstack", "desc": "The service openstack command places the switch in CVX-OpenStack configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "service topology", "cmd": "service topology\nno service topology", "desc": "The service topology command configures the topology statically on CVX without running LLDP on the servers connected to switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "service VXLAN", "cmd": "service VXLAN", "desc": "The service VXLAN command enters the CVX-VXLAN configuration mode where the VXLAN control service is enabled and configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show cvx", "cmd": "show cvx", "desc": "The show cvx command displays the enable status and current configuration of CVX." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show network physical-topology", "cmd": "show network physical-topology [hosts|neighbors]", "desc": "The show network physical-topology command displays the network topology discovered through CVX." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "source-interface (Management-CVX)", "cmd": "source-interface INT_NAME\nno source-interface\ndefault source-interface", "desc": "The source-interface command specifies the interface from where the IPv4 address is derived for use as the source for outbound CVX packets that the switch sends as a CVX client." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "DHCP", "title": "vtep (CVX-HSC)", "cmd": "vtep flood list type all | any\nno vtep flood list type\ndefault vtep flood list type", "desc": "The HSC service sends flood lists to each VTEP through CVX." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "vtep (CVX-VXLAN)", "cmd": "vtep mac-learning [control-plane|data-plane ]", "desc": "The OVSDB management protocol includes provisions for control-plane MAC learning, which allows MAC addresses to be distributed among VTEPs without using the data plane." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "RIP Conceptual Overview", "cmd": "RIP Conceptual Overview", "desc": "Routing Information Protocol (RIP) is a routing protocol typically used as an Interior Gateway Protocol (IGP)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "RIP Commands", "cmd": "RIP Commands", "desc": "Global Configuration Commands • router rip • router rip vrf Interface Configuration Commands • rip v2 multicast disable Router-RIP Configuration Mode • distance (RIP) • distribute-list (RIP) • metric default" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "distance (RIP)", "cmd": "distance distance_value\nno distance\ndefault distance", "desc": "The distance command assigns an administrative distance to routes that the switch learns through RIP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "distribute-list (RIP)", "cmd": "distribute-list [DIRECTION [in | out] [MAP [route-mapmap_name] [INTF [ethernet e_num]|[loopback\nno distribute-list [DIRECTION [in | out] [MAP [route-mapmap_name] [INTF [ethernet e_num]|\ndefault distribute-list [DIRECTION [in | out] [MAP [route-mapmap_name] [INTF [ethernet e_num]|", "desc": "The distribute-list command allows users to filter out routes that are received or sent out." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "metric default", "cmd": "metric default metric_value\nno metric default\ndefault metric default", "desc": "The metric default command specifies the metric value assigned to RIP routes learned from other protocols." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "network (RIP)", "cmd": "network NETWORK_ADDRESS\nno network NETWORK_ADDRESS\ndefault network NETWORK_ADDRESS", "desc": "The network command specifies which network the switch runs Routing Information Protocol (RIP), and also specifies which routes will be accepted into the RIP routing table." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "redistribute (RIP)", "cmd": "redistribute connected ROUTE_MAP\nredistribute ROUTE_TYPE [ROUTE_MAP]\nno redistribute connected ROUTE_MAP\nno redistribute ROUTE_TYPE\ndefault redistribute connected ROUTE_MAP\ndefault redistribute ROUTE_TYPE", "desc": "The redistribute command enables the importing of routes from a specified routing domain to RIP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "rip v2 multicast disable", "cmd": "rip v2 multicast disable\nno rip v2 multicast disable\ndefault rip v2 multicast disable", "desc": "The rip v2 multicast disable command specifies the transmission of Routing Information Protocol (RIP) Version 2 update packets from the configuration mode interface as broadcast to 255." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "router rip vrf", "cmd": "router rip vrf [RIP_INSTANCE]\nno router rip vrf [RIP_INSTANCE]\ndefault router rip vrf [RIP_INSTANCE]", "desc": "The router rip command places the switch in router-RIP configuration mode to configure an RIP routing instance in the non-default VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "show ip rip database", "cmd": "show ip rip database [FILTER]", "desc": "The show ip rip database command displays information about routes in the Routing Information Base." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "show ip rip neighbors", "cmd": "show ip rip neighbors", "desc": "The show ip rip neighbors command displays information about all RIP route gateways." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "timers (RIP)", "cmd": "timers [update_time | expire_time | deletion_time]\nno timers\ndefault timers", "desc": "The timers command configures the update interval, the expiration time, and the deletion time for routes received and sent through RIP." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "OSPF Routes over GRE Tunnels", "cmd": "OSPF Routes over GRE Tunnels", "desc": "This feature introduces support for OSPF routes over GRE tunnels under default and non-default VRFs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "Show Commands", "cmd": "show bfd hardware acceleration", "desc": "Hardware Acceleration Information To view whether hardware acceleration is running use the show bfd hardware acceleration command." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "Redistribute Configuration", "cmd": "Redistribute Configuration", "desc": "Configuring the redistribute ospf command under the config-router-bgp mode with multiple OSPFv2 instances configured redistributes routes from all OSPFv2 instances into BGP." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "OSPF Routes over GRE Tunnels Configuration", "cmd": "OSPF Routes over GRE Tunnels Configuration", "desc": "You may employ the following commands in the router OSPF mode: • tunnel routes • no tunnel routes • default tunnel routes To enable OSPFv2 over GRE tunnels, use the following commands: switch(config)# router ospf 6" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "auto-cost reference-bandwidth (OSPFv2)", "cmd": "auto-cost reference-bandwidth rate\nno auto-cost reference-bandwidth rate\ndefault auto-cost reference-bandwidth rate", "desc": "The auto-cost reference-bandwidth command is a factor in the formula that calculates the default OSPFv2 cost for Ethernet interfaces." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "adjacency exchange-start threshold (OSPFv2)", "cmd": "adjacency exchange-start threshold peers\nno adjacency exchange-start threshold\ndefault adjacency exchange-start threshold", "desc": "The adjacency exchange-start threshold command sets the exchange-start options for an OSPF instance." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "area default-cost (OSPFv2)", "cmd": "area area_id default-cost def_cost\nno area area_id default-cost def_cost\ndefault area area_id default-cost def_cost", "desc": "The area default-cost command specifies the cost for the default summary routes sent into a specified area." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "area filter (OSPFv2)", "cmd": "area area_id filter net_addr\nno area area_id filter net_addr\ndefault area area_id filter net_addr", "desc": "The area filter command prevents an area from receiving Type 3 Summary LSAs and Type 4 APSR Summary LSAs from a specified subnet." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "area not-so-stubby lsa type-7 convert type-5 (OSPFv2)", "cmd": "area area_id not-so-stubby lsa type-7 convert type-5\nno area area_id not-so-stubby lsa type-7 convert type-5\ndefault area area_id not-so-stubby lsa type-7 convert type-5", "desc": "The area not-so-stubby lsa type-7 convert type-5 command configures the switch to always translate Type-7 Link-State Advertisement (LSAs) to Type-5 LSAs." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "area nssa (OSPFv2)", "cmd": "area area_id nssa [TYPE]\nno area area_id nssa [TYPE]\ndefault area area_id nssa [TYPE]", "desc": "The area nssa command configures an OSPFv2 area as a Not-So-Stubby Area (NSSA)." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "area nssa default-information-originate (OSPFv2)", "cmd": "area area_id nssa default-information-originate [VALUE][TYPE][EXCL]\nno area area_id nssa default-information-originate\ndefault area area_id nssa default-information-originate", "desc": "The default area nssa default-information-originate command sets default route origination for the Not-So-Stubby Area (NSSA), allowing the redistribute policy to advertise a default route if one is present." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "area nssa no-summary (OSPFv2)", "cmd": "area area_id nssa no-summary\nno area area_id nssa no-summary\ndefault area area_id nssa no-summary", "desc": "The area nssa no-summary command configures the switch stop importing type-3 summary LSAs into the not-so-stubby area and sets the default summary route into the Not-So-Stubby Area (NSSA) in order to reach the inter-area prefixes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "area range (OSPFv2)", "cmd": "area area_id range net_addr [ADVERTISE_SETTING][COST_SETTING]\nno area area_id range net_addr [ADVERTISE_SETTING][COST_SETTING]\ndefault area area_id range net_addr [ADVERTISE_SETTING][COST_SETTING]", "desc": "The area range command configures OSPF Area Border Routers (ABRs) to consolidate or summarize routes, to set the cost setting routes, and to suppress summary route advertisements." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "area stub (OSPFv2)", "cmd": "area area_id stub [summarize]\nno area area_id stub [summarize]\ndefault area area_id stub [summarize]", "desc": "The area stub command sets the area type of an OSPF area to stub." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "clear ip ospf neighbor", "cmd": "clear ip ospf [PROCESS_ID] neighbor [LOCATION][VRF_INSTANCE]", "desc": "The clear ip ospf command clears the neighbors statistics per interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "compatible (OSPFv2)", "cmd": "compatible rfc1583\nno compatible rfc1583\ndefault compatible rfc1583", "desc": "The compatible command allows the selective disabling of compatibility with RFC 2328." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "default-information originate (OSPFv2)", "cmd": "default-information originate [FORCE][VALUE][TYPE][MAP]\nno default-information originate\ndefault default-information originate", "desc": "The default-information originate command enables default route origination for normal areas." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "distance ospf (OSPFv2)", "cmd": "distance ospf [external | inter-area | intra-area]\nno distance ospf [external | inter-area | intra-area]\ndefault distance ospf [external | inter-area | intra-area]", "desc": "The distance ospf command specifies the administrative distance for intra-area, inter-area, or external OSPF routes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "distribute-list in", "cmd": "distribute-list {prefix-list | route-map} list_name in\nno distribute-list {prefix-list | route-map}\ndefault distribute-list {prefix-list | route-map}", "desc": "A distribute list uses a route map or prefix list to filter specific routes from incoming OSPF LSAs." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "dn-bit-ignore (OSPFv2)", "cmd": "dn-bit-ignore\nno dn-bit-ignore\ndefault dn-bit-ignore", "desc": "The dn-bit-ignore command results in the DN bit in Type 3 Summary LSAs to be ignored during the Shortest Path First (SPF) calculations." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "interface Tunnel", "cmd": "interface Tunnel Tunnel No", "desc": "OSPF packets by default are sent with Time to Live (TTL) value 1." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf area", "cmd": "ip ospf area area_id\nno ip ospf area area_id\ndefault ip ospf area area_id", "desc": "The ip ospf area command enables OSPFv2 on an interface and associates the area to the interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf authentication", "cmd": "ip ospf authentication [METHOD]\nno ip ospf authentication\ndefault ip ospf authentication", "desc": "The ip ospf authentication command enables OSPFv2 authentication for the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf authentication-key", "cmd": "ip ospf authentication-key [ENCRYPT_TYPE] key_text\nno ip ospf authentication-key\ndefault ip ospf authentication-key", "desc": "The ip ospf authentication-key command configures the OSPFv2 authentication password for the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf cost", "cmd": "ip ospf cost interface_cost\nno ip ospf cost\ndefault ip ospf cost", "desc": "The ip ospf cost command configures the OSPFv2 cost for the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf dead-interval", "cmd": "ip ospf dead-interval time\nno ip ospf dead-interval\ndefault ip ospf dead-interval", "desc": "The ip ospf dead-interval command configures the dead interval for the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf disabled", "cmd": "ip ospf disabled\nno ip ospf disabled\ndefault ip ospf disabled", "desc": "The ip ospf disabled command disables OSPFv2 on the configuration mode interface without disrupting the OSPFv2 configuration." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf hello-interval", "cmd": "ip ospf hello-interval time\nno ip ospf hello-interval\ndefault ip ospf hello-interval", "desc": "The ip ospf hello-interval command configures the OSPFv2 hello interval for the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf message-digest-key", "cmd": "ip ospf message-digest-key key_id md5 ENCRYPT_TYPE key_text\nno ip ospf message-digest-key key_id\ndefault ip ospf message-digest-key key_id", "desc": "The ip ospf message-digest-key command configures a message digest authentication key for the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf network point-to-point", "cmd": "ip ospf network point-to-point\nno ip ospf network\ndefault ip ospf network", "desc": "The ip ospf network point-to-point command sets the configuration mode interface as a point-topoint link." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf retransmit-interval", "cmd": "ip ospf retransmit-interval period\nno ip ospf retransmit-interval\ndefault ip ospf retransmit-interval", "desc": "The ip ospf retransmit-interval command configures the link state advertisement retransmission interval for the interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf router-id output-format hostnames", "cmd": "ip ospf router-id output-format hostnames\nno ip ospf router-id output-format hostnames\ndefault ip ospf router-id output-format hostnames", "desc": "The ip ospf router-id output-format hostnames command causes the switch to display DNS names in place of numeric OSPFv2 router IDs in all OSPFv2 show commands, including: • show ip ospf • show ip ospf border-routers" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf transmit-delay", "cmd": "ip ospf transmit-delay trans\nno ip ospf transmit-delay\ndefault ip ospf transmit-delay", "desc": "The ip ospf transmit-delay command configures the transmission delay for OSPFv2 packets over the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf priority", "cmd": "ip ospf priority priority_level\nno ip ospf priority\ndefault ip ospf priority", "desc": "The ip ospf priority command configures OSPFv2 router priority for the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "line system", "cmd": "line system\nno line system", "desc": "The line system command places the switch in the OSPF - Line System configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "log-adjacency-changes (OSPFv2)", "cmd": "log-adjacency-changes detail\nno log-adjacency-changes\ndefault log-adjacency-changes", "desc": "The log-adjacency-changes command enables syslog messages to be sent when it detects OSPFv2 link state changes or when it detects that a neighbor has gone up or down." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "maximum-paths (OSPFv2)", "cmd": "maximum-paths paths\nno maximum-paths\ndefault maximum-paths", "desc": "The maximum-paths command controls the number of parallel routes that OSPFv2 supports." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "max-lsa (OSPFv2)", "cmd": "max-lsa lsa_num [WARNING] [IGNORE_TIME][IGNORE_COUNT][RESET]\nno max-lsa\ndefault max-lsa", "desc": "The max-lsa command specifies the maximum number of LSAs allowed in the LSDB." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "max-metric router-lsa (OSPFv2)", "cmd": "max-metric router-lsa [EXTERNAL][STUB][STARTUP][SUMMARY]\nno max-metric router-lsa [EXTERNAL][STUB][STARTUP][SUMMARY]\ndefault max-metric router-lsa [EXTERNAL][STUB][STARTUP][SUMMARY]", "desc": "The max-metric router-lsa command configures OSPF to include the maximum value in LSA metric fields to keep other network devices from using the switch as a preferred intermediate SPF hop." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "network area (OSPFv2)", "cmd": "network ipv4_subnet area area_id\nno network ipv4_subnet area area_id\ndefault network ipv4_subnet area area_id", "desc": "The network area command assigns the specified IPv4 subnet to an OSPFv2 area." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "no area (OSPFv2)", "cmd": "no area area_id [TYPE]\ndefault area area_id [TYPE]", "desc": "The no area command removes the corresponding area command from the running-config: • no/default area not-so-stubby lsa type-7 convert type-5 commands remove the translate type7 always parameter without changing the area type." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "packet", "cmd": "packet packet header tokens forwarding [bridged | routed | mpls][multicast][decap]", "desc": "This describes packet types that the feature is applied on." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "passive-interface default (OSPFv2)", "cmd": "passive-interface default\nno passive-interface default\ndefault passive-interface default", "desc": "The passive-interface default command configures all interfaces as OSPFv2 passive by default." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "passive-interface (OSPFv2)", "cmd": "passive-interface INTERFACE_NAME\nno passive-interface INTERFACE_NAME\ndefault passive-interface INTERFACE_NAME", "desc": "The passive-interface command disables OSPFv2 on an interface range." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "point-to-point routes (OSPFv2)", "cmd": "point-to-point routes\nno point-to-point routes\ndefault point-to-point routes", "desc": "The point-to-point routes command enables the switch to maintain a local Routing Information Base (RIB) to store information it learns from its neighbors." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "redistribute (OSPFv2)", "cmd": "redistribute ROUTE_TYPE [ROUTE_MAP]\nno redistribute ROUTE_TYPE [ROUTE_MAP]\ndefault redistribute ROUTE_TYPE [ROUTE_MAP]", "desc": "The redistribute command enables the advertising of all specified routes on the switch into the OSPFv2 domain as external routes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "redistribute ospf", "cmd": "redistribute ospf [include [leaked] | match [external | internal | nssa-external] | route-map word]\nno redistribute ospf [match [external | internal | nssa-external]\ndefault redistribute ospf [match [external | internal | nssa-external]", "desc": "Redistributing connected routes causes the OSPFv2 instance to advertise all connected routes on the switch as external OSPFv2 routes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "redistribute ospf instance", "cmd": "redistribute ospf instance [OPTIONS]", "desc": "The redistribute ospf instance command redistributes either the non-leaked routes, or both leaked and non-leaked routes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "router ospf", "cmd": "router ospf process_id [VRF_INSTANCE]\nno router ospf process_id [VRF_INSTANCE]\ndefault router ospf process_id [VRF_INSTANCE]", "desc": "The router ospf command places the switch in router-ospf configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "router-id (OSPFv2)", "cmd": "router-id [identifier]\nno router-id [identifier]\ndefault router-id [identifier]", "desc": "The router-id command assigns a router ID for an OSPFv2 instance." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show hardware tcam profile", "cmd": "show hardware tcam profile [profile] detail", "desc": "Use the show hardware tcam profile command to verify that the user-defined-tcam profile is applied correctly without errors on the DCS-7020, DCS-7280R/R2, or DCS-7500R/R2 platforms." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf border-routers", "cmd": "show ip ospf border-routers [VRF_INSTANCE]", "desc": "The show ip ospf border-routers command displays the internal OSPFv2 routing table entries to Area Border Routers (ABRs) and Autonomous System Boundary Routers (ASBRs) for each of the OSPFv2 areas." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "Area", "cmd": "Area", "desc": "OSPFv2 Commands" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf database database-summary", "cmd": "show ip ospf [AREA] database database-summary [VRF_INSTANCE]", "desc": "The show ip ospf database database-summary command displays the number of link state advertisements in the OSPFv2 database." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf database ", "cmd": "show ip ospf [AREA] database[ROUTER] [VRF_INSTANCE]", "desc": "The show ip ospf database command displays the OSPFv2 link state advertisements that originate on a specified switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf database ", "cmd": "show ip ospf [AREA] database LINKSTATE_TYPE linkstate_id [ROUTER] [VRF_INSTANCE]", "desc": "The show ip ospf database command displays details of the specified link state advertisements." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf interface brief", "cmd": "show ip ospf [PROCESS_ID] interface brief [VRF_INSTANCE]", "desc": "The show ip ospf interface brief command displays a summary of OSPFv2 information." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf interface", "cmd": "show ip ospf [PROCESS_ID] interface [INTERFACE_NAME][VRF_INSTANCE]", "desc": "The show ip ospf interface command displays interface information that is related to OSPFv2." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf lsa-log", "cmd": "show ip ospf [PROCESS_ID] ospf-log", "desc": "The show ip ospf lsa-log command displays log entries when LSA update messages are sent or received for OSPF." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf neighbor adjacency-changes", "cmd": "show ip ospf neighbor [INTERFACE_NAME][NEIGHBOR] adjacency-changes", "desc": "The show ip ospf neighbor adjacency-changes command displays the OSPFv2 neighbor adjacency change log for specified interfaces." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf neighbor state", "cmd": "show ip ospf neighbor state STATE_NAME [VRF_INSTANCE]", "desc": "The show ip ospf neighbor state command displays the state information on OSPF neighbors on a per-interface basis." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf neighbor summary", "cmd": "show ip ospf [PROCESS_ID] neighbor summary [VRF_INSTANCE]", "desc": "The show ip ospf neighbor summary command displays a single line of summary information for each OSPFv2 neighbor." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf neighbor", "cmd": "show ip ospf [PROCESS_ID] neighbor [INTERFACE_NAME] [NEIGHBOR] [DATA] [VRF_INSTANCE]", "desc": "The show ip ospf neighbor command displays OSPFv2 neighbor information for specified interfaces." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf request queue", "cmd": "show ip ospf request queue [VRF_INSTANCE]", "desc": "The show ip ospf request queue command displays a list of all OSPFv2 Link State Advertisements (LSAs) requested by a router." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf retransmission queue", "cmd": "show ip ospf retransmission queue [VRF_INSTANCE]", "desc": "The show ip ospf retransmission queue command displays a list of all OSPFv2 Link State Advertisements (LSAs) waiting to be re-sent." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ip ospf", "cmd": "show ip ospf [PROCESS_ID][VRF_INSTANCE]", "desc": "The show ip ospf command displays OSPFv2 routing information • PROCESS_ID OSPFv2 process ID." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show line system dom thresholds", "cmd": "show line system [[port RANGE] dom thresholds]", "desc": "The show line system dom thresholds command reports DOM information reported by the OSFPLS module." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show line system status", "cmd": "show line system [port RANGE] status", "desc": "The show line system status command displays module status." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "summary-address", "cmd": "summary-address {ip_address subnet_mask | ip_prefix} [attribute_map WORD | not_advertise | tag]\ndefault summary-address {ip_address summary_mask | ip_prefix}\nno summary-address {ip_address summary_mask | ip_prefix}", "desc": "The summary-address command allows aggregation of external routes advertised by an OSPF ASBR." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "system profile", "cmd": "system profile profilename", "desc": "Use the system profile command to apply the user defined TCAM profile to the system." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "timers lsa rx min interval (OSPFv2)", "cmd": "timers lsa rx min interval lsa_time\nno timers lsa rx min interval\ndefault timers lsa rx min interval", "desc": "The timers lsa rx min interval command sets the minimum interval for acceptance of identical Link State Advertisements (LSAs) from OSPFv2 neighbors." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "timers lsa tx delay initial (OSPFv2)", "cmd": "timers lsa tx delay initial [initial_delay | min_hold | max_wait]\nno timers lsa tx delay initial\ndefault timers lsa tx delay initial", "desc": "The timers lsa tx delay initial command sets the rate-limiting values for OSPF link-state advertisement generation." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "timers spf delay initial (OSPFv2)", "cmd": "timers spf delay initial [initial_delay | hold_interval | max_interval]\nno timers spf\ndefault timers spf", "desc": "The purpose of SPF throttling is to delay Shortest Path First (SPF) calculations when network topology is changing rapidly." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "tunnel routes", "cmd": "tunnel routes\nno tunnel routes\ndefault tunnel routes", "desc": "Use the tunnel routes command or the default form of the command to enable OSPFv2 routes over GRE tunnels." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "Flood Pacing", "cmd": "Flood Pacing", "desc": "OSPFv3 flood pacing allows configuring the minimum interval between the transmission of consecutive Link State (LS) update packets in a network." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "IP Routing", "cmd": "ipv6 router ospf 9", "desc": "OSPFv3 requires enabling IPv6 unicast routing on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "Interface vlan3911 LSDB", "cmd": "Interface vlan3911 LSDB", "desc": "Type LNK LNK Link ID" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "area authentication ipsec spi", "cmd": "area area_id authentication ipsec spi spi_value {md5|sha1} passphrase {0 unencrypted_key | 7\nhidden_key | LINE}\nno area area_id authentication ipsec spi spi_value {md5| sha1} passphrase {0 unencrypted_key |\ndefault area area_id authentication ipsec spi spi_value {md5| sha1} passphrase {0\nunencrypted_key | 7 hidden_key | LINE}", "desc": "The area authentication ipsec spi command configures OSPFv3 authentication on an area." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "area encryption ipsec spi", "cmd": "area area_id encryption ipsec spi spi_value esp null{md5 | sha1} { 0 unencrypted_key | 7\nencrypted_key | KEY}\nno area area_id encryption\ndefault area area_id encryption", "desc": "The area encryption ipsec spi command configures OSPFv3 security on an area." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "area stub (OSPFv3)", "cmd": "area area_id stub\nno area area_id stub\ndefault area area_id stub", "desc": "The area stub command configures the area type of an OSPFv3 area." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "clear ospfv3 ipv6 force-spf", "cmd": "clear ospfv3 ipv6 force-spf [VRF_INSTANCE]", "desc": "The clear ospfv3 ipv6 force-spf command starts the SPF algorithm without clearing the OSPF database." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "default-information originate (OSPFv3)", "cmd": "default-information originate [DURATION always][VALUE metric 1-65535][TYPE][metric-type\nno default-information originate\ndefault default-information originate", "desc": "The default-information originate command generates a default external route into an OSPF domain." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "default-metric (OSPFv3)", "cmd": "default-metric def_metric\nno default-metric\ndefault default-metric", "desc": "The default-metric command sets default metric value for routes redistributed into the OSPFv3 domain." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "distance ospf intra-area (OSPFv3)", "cmd": "distance ospf intra-area distance\nno distance ospf intra-area\ndefault distance ospf intra-area", "desc": "The distance ospf intra-area command sets the administrative distance for routes in a single OSPFv3 area." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ipv6 ospf area", "cmd": "ipv6 ospf process_id [area area_id]\nno ipv6 ospf process_id [area area_id]\ndefault ipv6 ospf process_id [area area_id]", "desc": "The ipv6 ospf area command enables OSPFv3 on the interface and associates the area to the interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ipv6 router ospf", "cmd": "ipv6 router ospf process_id [VRF_INSTANCE vrf vrf_name]\nno ipv6 router ospf process_id [ VRF_INSTANCE vrf vrf_name]\ndefault ipv6 router ospf process_id [ VRF_INSTANCE vrf vrf_name]", "desc": "The ipv6 router ospf command places the switch in router-OSPFv3 configuration mode and creates and OSPFv3 instance if one does not already exist." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "log-adjacency-changes (OSPFv3)", "cmd": "log-adjacency-changes [INFO_LEVEL detail]\nno log-adjacency-changes\ndefault log-adjacency-changes", "desc": "The log-adjacency-changes command enables syslog messages to be sent when it detects OSPFv3 link state changes or when it detects that a neighbor has gone up or down." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ospfv3 transmit-delay", "cmd": "ospfv3 transmit-delay trans\nno ospfv3 transmit-delay\ndefault ospfv3 transmit-delay", "desc": "Theospfv3 transmit-delay command configures the transmission delay for OSPFv3 packets." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ospfv3 authentication ipsec spi", "cmd": "ospfv3 authentication ipsec spi spi_value {md5 | sha1}{0 unencrypted_key | 7 hidden_key |\nospfv3 authentication ipsec spi spi_value {md5 | sha1} passphrase{0 unencrypted_passphrase |\nno ospfv3 authentication\ndefault ospfv3 authentication", "desc": "The ospfv3 authentication ipsec spi command configures OSPFv3 authentication on an interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ospfv3 cost", "cmd": "ospfv3 cost interface_cost\nno ospfv3 cost\ndefault ospfv3 cost", "desc": "The ospfv3 cost command sets the OSPFv3 cost for the interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ospfv3 dead-interval", "cmd": "ospfv3 dead-interval time\nno ospfv3 dead-interval\ndefault ospfv3 dead-interval", "desc": "The ospfv3 dead-interval command sets the OSPFv3 dead interval." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ospfv3 encryption ipsec spi", "cmd": "ospfv3 encryption ipsec spi spi_value esp {3des-cbc | aes-128-cbc | aes-128-cbc | aes-192-cbc}{0\nunencrypted_key | 7 encrypted_key} {md5 | sha1}{0 unencrypted_key | 7 encrypted_key | KEY}\nencrypted_passphrase | LINE}\nospfv3 encryption ipsec spi spi_value esp null {md5 | sha1}{0 unencrypted_key | 7 encrypted_key\nospfv3 encryption ipsec spi spi_value esp {md5 | sha1} passphrase {0 unencrypted_passphrase |\ndefault ospfv3 encryption\nno ospf3 encryption", "desc": "The ospfv3 encryption ipsec spi command configures OSPFv3 security on an interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ospfv3 hello-interval", "cmd": "ospfv3 hello-interval time\nno ospfv3 hello-interval\ndefault ospfv3 hello-interval", "desc": "The ospfv3 hello-interval command sets the OSPFv3 hello interval." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ospfv3 ipv6 retransmit-interval", "cmd": "ospfv3 ipv6 retransmit-interval period\nno ospfv3 ipv6 retransmit-interval\ndefault ospfv3 ipv6 retransmit-interval", "desc": "The ospfv3 ipv6 retransmit-interval command configures the link state advertisement retransmission interval." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ospfv3 network", "cmd": "ospfv3 network point-to-point\nno ospfv3 network\ndefault ospfv3 network", "desc": "The ospfv3 network command sets the configuration mode interface as a point-to-point link." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ospfv3 priority", "cmd": "ospfv3 priority priority_level\nno ospfv3 priority\ndefault ospfv3 priority", "desc": "The ospfv3 priority command configures the OSPFv3 router priority." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "redistribute (OSPFv3)", "cmd": "redistribute ROUTE_TYPE ROUTE_MAP\nno redistribute ROUTE_TYPE\ndefault redistribute ROUTE_TYPE", "desc": "The redistribute command enables the advertising of all specified routes into the OSPFv3 domain as external routes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "router-id (OSPFv3)", "cmd": "router-id identifier\nno router-id\ndefault router-id", "desc": "The router-id command assigns the router ID for an OSPFv3 instance." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf border-routers", "cmd": "show ipv6 ospf border-routers [VRF_INSTANCE vrf vrf_name]", "desc": "The show ipv6 ospf border-routers command displays the OSPF routing table entries." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf database link if-name", "cmd": "show ipv6 ospf database link if-name [INTF_ID][LS_ID][ROUTER][DATA_LEVEL]", "desc": "The show ipv6 ospf database link command displays link state advertisement details." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf database link if-type", "cmd": "show ipv6 ospf database link if-type [INTF_TYPE][LS_ID][ROUTER][DATA_LEVEL]", "desc": "The show ipv6 ospf database link command displays information of the link state advertisements." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf database ", "cmd": "show ipv6 ospf database [FILTER][LINKSTATE_ID][ROUTER][DATA_LEVEL]", "desc": "The show ipv6 ospf database command displays the OSPF link state advertisements that originate on a switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf database link", "cmd": "show ipv6 ospf database link [LINKSTATE_ID][ROUTER][DATA_LEVEL]", "desc": "The show ipv6 ospf database link command displays details of the specified link state advertisements." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf database", "cmd": "show ipv6 ospf database [VRF_INSTANCE vrf vrf_name]", "desc": "The show ipv6 ospf database command displays data from the OSPF database." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf database ", "cmd": "show ipv6 ospf database [FILTER][LINK_TYPE][LINKSTATE_ID][ROUTER][DATA_LEVEL]", "desc": "The show ipv6 ospf database command displays detailed information about the specified link state advertisements." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf interface", "cmd": "show ipv6 ospf interface [VRF_INSTANCE]", "desc": "The show ipv6 ospf interface command displays OSPFv3 information on interfaces where OSPFv3 is enabled." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf lsa-log", "cmd": "show ipv6 ospf [PROCESS_ID] lsa-log [VRF_INSTANCE]", "desc": "The show ipv6 ospf lsa-log command displays log entries when LSA update messages are sent or received for OSPFv3." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf neighbor state", "cmd": "show ipv6 ospf neighbor state STATE_NAME [VRF_INSTANCE ]", "desc": "The show ipv6 ospf neighbor state command displays the state information on OSPF neighbors on a per-interface basis." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf neighbor summary", "cmd": "show ipv6 ospf neighbor summary [VRF_INSTANCE]", "desc": "The show ipv6 ospf neighbor summary command displays a single line of state information for each OSPFv3 neighbor." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf neighbor", "cmd": "show ipv6 ospf neighbor [VRF_INSTANCE]", "desc": "The show ipv6 ospf neighbor command displays OSPFv3 neighbor information." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf spf-log", "cmd": "show ipv6 ospf [PROCESS_ID] spf-log [VRF_INSTANCE]", "desc": "The show ipv6 ospf spf-log command displays when and how long the switch took to run a full SPF calculation for OSPFv3." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ipv6 ospf", "cmd": "retransmission-list | spf-log | vrf ] Process ID", "desc": "The show ipv6 ospf command displays information about OSPFv3 routing." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "show ospfv3", "cmd": "show ospfv3", "desc": "The show ospfv3 command displays the OSPFv3 configuration of OSPFv3 address family and routing process." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "timers lsa tx delay initial (OSPFv3)", "cmd": "timers lsa tx delay initial [initial_delay]|[min_hold]|[max_wait]\nno timers lsa tx delay initial\ndefault timers lsa tx delay initial", "desc": "The timers lsa tx delay initial command sets the rate-limiting values for OSPFv3 Link-State Advertisement (LSA) generation." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "timers spf delay initial (OSPFv3)", "cmd": "timers spf delay initial [initial_delay]|[hold_interval]|[max_interval]\nno timers spf\ndefault timers spf", "desc": "The purpose of SPF throttling is to delay Shortest Path First (SPF) calculations when network topology is changing rapidly." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "timers", "cmd": "timers {lsa | out-delay| pacing | throttle}\nno timers {lsa | out-delay| pacing | throttle}\ndeault timers {lsa | out-delay| pacing | throttle}", "desc": "The timers command configures the minimum interval between the transmission of consecutive LS update packets in a network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "of RFC8667.", "cmd": "of RFC8667.", "desc": "The following enhancements are available by release: • EOS Release 4." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Dynamic Link Delay using TWAMP Light", "cmd": "Dynamic Link Delay using TWAMP Light", "desc": "Overview of Link Delay using Two-Way Active Measurement Protocol (TWAMP) EOS provides TWAMP support as a protocol used for active network performance monitoring." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "level 2: number dis interfaces: 1, LSDB size: 1 switch>", "cmd": "level 2: number dis interfaces: 1, LSDB size: 1 switch>", "desc": "• This command displays the SPF interval information about IS-IS instances." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "level 1: number dis interfaces: 0, LSDB size: 1", "cmd": "level 1: number dis interfaces: 0, LSDB size: 1", "desc": "level 2: number dis interfaces: 0, LSDB size: 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "L1", "cmd": "L1", "desc": "* 1.0.8.1/32 Node R:0 N:1 P:0 E:0 V:0 L:0" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis segment-routing prefix-segments", "cmd": "show isis segment-routing prefix-segments", "desc": "The show isis segment-routing prefix-segments command provides the details of all prefix segments being originated as well the segments received from IS-IS SR speakers in the domain." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "address-family", "cmd": "address-family [ipv4 | ipv6][MODE]\nno address-family [ipv4 | ipv6][MODE]\ndefault address-family [ipv4 | ipv6][MODE]", "desc": "The address-family command places the switch in address-family configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "adjacency-segment", "cmd": "adjacency-segment [ipv4|ipv6] p2p [multiple][label label | indexindex] backup-eligible\nno adjacency-segment [ipv4 | ipv6]p2p [multiple][label label|index index] backup-eligible\ndefault adjacency-segment [ipv4 | ipv6]p2p multiple][label label|index index] backup-eligible", "desc": "Use the adjacency-segment command in the interface configuration mode to have the PLR computes backup paths for an adjacency segment only if the Adjacency SID sub-TLV has the B-flag (backup flag) set." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "adjacency-segment (allocation)", "cmd": "adjacency-segment allocation [all-interface |none | sr-peers]", "desc": "The adjacency-segment command allocates adjacency segments to all IS-IS adjacencies, or only those adjacencies which are to IS-IS routers that have advertised IS-IS SR capability, or to none of the adjacencies." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "adjacency-segment (static)", "cmd": "adjacency-segment ipv4 | ipv6 p2p [[label label-value]|[index index-value global]]", "desc": "The adjacency-segment command configures IS-IS adjacencies statically on the switch, so that these values are preserved even when the switch restarts." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "advertise interface-address passive-only", "cmd": "advertise interface-address passive-only", "desc": "The advertise interface-address passive-only command configures IS-IS to advertise interface addresses for passive interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "advertise ip-reachability passive-only", "cmd": "advertise ip-reachability passive-only", "desc": "The advertise ip-reachability passive-only allows the configuration of advertising IS-IS IP reachability TLVs for passive and nonpassive interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "area leader", "cmd": "area leader [disabled | level-1 [disabled] | level-2 [disabled] | priority [num [level-1 | level-2]]]\nno area leader\ndefault area leader", "desc": "Use the area leader command to tune or disable the area leader election process." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "authentication key", "cmd": "authentication key [0 | 7] [LAYER_VALUE]\nno authentication key [0 | 7] [LAYER_VALUE]\ndefault authentication key [0 | 7] [LAYER_VALUE]", "desc": "Theauthentication key command configures the authentication key for the IS-IS instance causing LSPs, CSNPs and PSNPs to be authenticated." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "authentication mode", "cmd": "authentication mode [md5 | text] [LAYER_VALUE]\nno authentication mode [md5 | text] [LAYER_VALUE]\ndefault authentication mode [md5 | text] [LAYER_VALUE]", "desc": "The authentication mode command configures authentication for the IS-IS instance causing LSPs, CSNPs, and PSNPs to be authenticated." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "bfd all-interfaces", "cmd": "bfd all-interfaces", "desc": "The bfd all-interfaces command enables Bidirectional Forwarding Detection (BFD) for all IS-ISenabled interfaces in the IPv4 or IPv6 address family." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "clear isis database", "cmd": "clear isis [INSTANCE] database {LSPID | all | level-1 | level-2}", "desc": "The clear isis database command clears a specific LSP with a predefined LSP ID, or LSPs at a given level, or all LSPs in the database." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "clear isis instance", "cmd": "clear isis instance vrf vrf_name", "desc": "the clear isis instance clears an IS-IS instance or all instances." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "clear isis neighbor", "cmd": "clear isis neighbor {Neighbor-ID | all | interface} [level-1 | level-2 | level-1-2]", "desc": "The clear isis neighbor command clears IS-IS adjacencies that exist on an interface, or at a specific level, or the adjacencies formed with a given neighbor (either with a system ID or a hostname)." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "event-monitor convergence", "cmd": "event-monitor convergence vrf default event route convergence protocol isis\nno event-monitor convergence\ndefault event-monitor convergence", "desc": "The event-monitor convergence command enters the Event Monitor Convergence Configuration Mode and allows sending IS-IS convergence events to a database." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "fast-flooding profile", "cmd": "fast-flooding all-interfaces profile profile_name [lsp [burst size size_value]\nno fast-flooding", "desc": "The fast-flooding profile command in the Router IS-IS Configuration Mode enables Fast Flooding on Point-2-Point (P2P) links and enables faster network convergence for a consistent Link State Database (LSDB) for Link State Interior Gateway Protocols (IGPs)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "fast-reroute ti-lfa mode", "cmd": "fast-reroute ti-lfa mode [[[ link-protection | node-protection][level-1 | level-2]] | disabled]", "desc": "Use the fast-reroute ti-lfa mode to enable link or node protection for node segments and adjacency segments of a specific address-family learned on all IS-IS interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "fast-reroute ti-lfa srlg", "cmd": "fast-reroute ti-lfa srlg [strict]", "desc": "Use the fast reroute ti-lfa srlg command to enable SRLG protection on all interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "graceful-restart (IS-IS)", "cmd": "graceful-restart t2 | restart-hold-time value\nno graceful-restart t2 | restart-hold-time value\ndefault graceful-restart t2 | restart-hold-time value", "desc": "The graceful-restart command configures IS-IS graceful-restart." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "is-hostname", "cmd": "is-hostname string\nno is-hostname", "desc": "The is-hostname command configures the use of a human-readable string to represent the symbolic name of an IS-IS router." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis authentication key", "cmd": "isis authentication key [0 | 7] [LAYER_VALUE]\nno isis authentication key [0 | 7] [LAYER_VALUE]\ndefault isis authentication key [0 | 7] [LAYER_VALUE]", "desc": "The isis authentication key command configures the authentication key on the interface causing ISIS Hellos to be authenticated." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis authentication mode", "cmd": "isis authentication mode [md5 | text][LAYER_VALUE]\nno isis authentication mode [md5 | text][LAYER_VALUE]\ndefault isis authentication mode [md5 | text][LAYER_VALUE]", "desc": "The isis authentication mode command configures authentication on the interface causing IS-IS Hellos to be authenticated." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis bfd", "cmd": "isis bfd\nno isis bfd\ndefault isis bfd", "desc": "The isis bfd command activates the corresponding IS-IS routing instance on the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis enable", "cmd": "isis enable instance_id\nno isis enable\ndefault isis enable", "desc": "The isis enable command activates the corresponding IS-IS routing instance on the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis fast-reroute ti-lfa mode", "cmd": "isis fast-reroute ti-lfa mode [link-protection | node-protection | disabled]\nno isis fast-reroute ti-lfa mode [link-protection | node-protection | level-1 |\ndefault isis fast-reroute ti-lfa mode [link-protection | node-protection |\ndisabled][level-1 | level-2]", "desc": "Use the isis fast-reroute ti-lfa mode command to enable link or node protection for node segments and adjacency segments learned on a specific IS-IS interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis hello-interval", "cmd": "isis hello-interval time\nno isis hello-interval\ndefault isis hello-interval", "desc": "The isis hello-interval command sends Hello packets from applicable interfaces to maintain the adjacency through the transmitting and receiving of Hello packets." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis hello-multiplier", "cmd": "isis hello-multiplier factor\nno isis hello-multiplier\ndefault isis hello-multiplier", "desc": "The isis hello-multiplier command specifies the number of IS-IS hello packets missed by a neighbor before the adjacency is considered down." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis address-family fast-reroute ti-lfa srlg", "cmd": "isis [ipv4 | ipv6] unicast fast-reroute ti-lfa [mode | srlg] [strict |\ndisabled]\nno isis [ipv4 | ipv6] unicast fast-reroute ti-lfa [mode | srlg] [strict |\ndisabled]\ndefault isis [ipv4 | ipv6] unicast fast-reroute ti-lfa [mode | srlg] [strict", "desc": "Use the isis address-family fast-reroute ti-lfa srlg command to enable protection selectively on a specific interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis ipv6 metric", "cmd": "isis ipv6 metric metric_value\nno isis ipv6 metric\ndefault isis ipv6 metric", "desc": "The isis ipv6 metric command configures the IPv6 metric." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis lsp tx interval", "cmd": "isis lsp tx interval period\nno isis lsp tx interval\ndefault isis lsp tx interval", "desc": "The isis lsp tx interval command sets the interval at which IS-IS sends link-state information on the interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis metric", "cmd": "isis metric metric_cost\nno isis metric\ndefault isis metric", "desc": "The isis metric command sets cost for sending information over an interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis multi-topology", "cmd": "isis multi-topology address-family ipv4 unicast\nno isis multi-topology address-family ipv4 unicast\ndefault isis multi-topology address-family ipv4 unicast", "desc": "The isis multi-topology command configures the IPv4 or IPv6 address family individually on an interface with both IPv4 and IPv6 addresses." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis network", "cmd": "isis network point-to-point\nno isis network\ndefault isis network", "desc": "The isis network command sets the configuration mode interface as a point-to-point link." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis passive", "cmd": "isis passive\nno isis passive\ndefault isis passive", "desc": "The isis passive command configures the configuration-mode interface as passive." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "isis priority", "cmd": "isis priority priority_level\nno isis priority\ndefault isis priority", "desc": "The isis priority command sets the IS-IS priority for the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "is-type", "cmd": "is-type LAYER_VALUE", "desc": "The is-type command configures the routing level for an IS-IS instance." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "log-adjacency-changes (IS-IS)", "cmd": "log-adjacency-changes\nno log-adjacency-changes\ndefault log-adjacency-changes", "desc": "The log-adjacency-changes command sets the switch to send Syslog messages when it detects link state changes or when it detects that a neighbor state has changed." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "lsp dynamic flooding", "cmd": "lsp flood dynamic [level-1 | level-2]\nno lsp flood dynamic [level-1 | level-2]\ndefault lsp flood dynamic [level-1 | level-2]", "desc": "Use the lsp flooding dynamic command to configure dynamic flooding." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "match isis level", "cmd": "match isis level [level-1 | level-2]\nno match isis level [level-1 | level-2]\ndefault match isis level [level-1 | level-2]", "desc": "The match isis level command configures a route map to match on ISIS level." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "monitor twamp", "cmd": "monitor twamp twamp-light", "desc": "The monitor twamp twamp-light command enters the TWAMP configuration mode and allows the configuration of TWAMP profiles to initiate TWAMP reflection on an IS-IS network." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "mpls label range", "cmd": "mpls label range value", "desc": "The mpls label range command derives the indices of the actual MPLS label on the SRGB advertised by the router." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "multi-topology", "cmd": "multi-topology\nno multi-topology\ndefault multi-topology", "desc": "The multi-topology command configures IS-IS Multi-Topology (MT) support (disabled by default), enabling an IS-IS router to compute a separate topology for IPv4 and IPv6 links in the network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "net", "cmd": "net mask_hex\nno net\ndefault net", "desc": "The net command configures the Network Entity Title of the IS-IS instance." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "node-segment", "cmd": "node-segment [ipv4 | ipv6] index value", "desc": "The node-segment command associates the node segments with prefix mask length /32 (IPV4) or /128 (IPV6) addresses." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "passive (IS-IS)", "cmd": "passive INTERFACE_NAME\nno passive INTERFACE_NAME\ndefault passive INTERFACE_NAME", "desc": "The passive command configures the specified IS-IS interface as passive." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "prefix-segment", "cmd": "prefix-segment ip-address index value", "desc": "The prefix-segment command associates prefix segments with any IS-IS prefix a router is originating an IP Reachability TLV for." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "proxy-node-segment", "cmd": "proxy-node-segment ip-address index index_value range value conflict ignore", "desc": "The proxy-node-segment command configures a proxy-node-SID for a IS-IS prefix originating from the router that does not support IS-IS SR." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "proxy-node-segment mpls", "cmd": "proxy-node-segment mpls [fallback | pop | forward]", "desc": "The proxy-node-segment mpls command allows the configuration of an MPLS route to forward traffic to the IGP next-hop for the loopback." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "redistribute (IS-IS)", "cmd": "redistribute ROUTE_TYPE\nno redistribute ROUTE_TYPE\ndefault redistribute ROUTE_TYPE", "desc": "The redistribute command redistributes the specified types of routes into IS-IS." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "redistribute bgp route-map", "cmd": "redistribute bgp route-map map_name\nno redistribute bgp\ndefault redistribute ROUTE_TYPE", "desc": "The redistribute bgp route-map command redistributes the BGP routes from the specified route map into IS-IS." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "router isis", "cmd": "router isis instance_name [VRF_INSTANCE]\nno router isis instance_name\ndefault router isis instance_name", "desc": "The router isis command places the switch in router ISIS configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "segment-routing mpls", "cmd": "segment-routing mpls\nno segment-routing mpls\ndefault segment-routing mpls", "desc": "The segment-routing mpls command places the switch in the segment-routing mpls configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "set isis level", "cmd": "set isis level [level-1 | level-2 | level-1-2]\nno set isis level [level-1 | level-2 | level-1-2]\ndefault set isis level [level-1 | level-2 | level-1-2]", "desc": "The set isis level command configures a route map to set ISIS level." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "set-overload-bit", "cmd": "set-overload-bit [on-startup interval]\nno set-overload-bit\ndefault set-overload-bit", "desc": "The set-overload-bit command sets the overload bit in link state packets (LSPs) to signal that the switch is not available for forwarding transit traffic (for instance, during startup or when the switch is being" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis database", "cmd": "show isis database [INSTANCES][INFO_LEVEL]\nshow isis database [INFO_LEVEL] [VRF_INSTANCE]", "desc": "The show isis database command displays the link state database of IS-IS." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis database detail", "cmd": "show isis database detail [tlv]", "desc": "The show isis database detail command displays a view of LSPDB of different devices in the ISIS domain." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis dynamic flooding", "cmd": "show isis dynamic flooding nodes", "desc": "Use the show isis dynamic flooding command to monitor Dynamic Flooding." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis graceful-restart vrf", "cmd": "show isis graceful-restart vrf vrf-name", "desc": "The show isis graceful-restart vrf command displays the GR configuration and graceful-restart related state of the IS-IS instance as well as its neighbors." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis hostname", "cmd": "show isis hostname", "desc": "The show isis hostname command displays mapping between the System ID and IS-IS hostname." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis interface", "cmd": "show isis interface [INSTANCES][INTERFACE_NAME][INFO_LEVEL]\nshow isis interface [INTERFACE_NAME] [INFO_LEVEL][VRF_INSTANCE]", "desc": "The show isis interface command displays interface information for the IS-IS instance." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "Interface Ethernet30:", "cmd": "Interface Ethernet30:", "desc": "Index: 36 SNPA: 0:1c:73:c:5:7f MTU: 1497 Type: broadcast Level 2: Metric: 10, Number of adjacencies: 1 LAN-ID: 3030." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis local-convergence-delay", "cmd": "show isis local-convergence-delay", "desc": "The show isis local-convergence-delay command shows the current or last attempt at delaying the convergence of protected routes on a link down/BFD neighbor down event." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis neighbors", "cmd": "show isis neighbors [INSTANCES] [INFO_LEVEL]\nshow isis neighbor [INFO_LEVEL] [VRF_INSTANCE]", "desc": "The show isis neighbors command displays IS-IS neighbor information." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis network topology", "cmd": "show isis network topology\nshow isis INSTANCES network topology\nshow isis network topology VRF_INSTANCE", "desc": "The show isis network topology command displays a list of all IS-IS devices that are reachable in the network." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis segment-routing adjacency-segments", "cmd": "show isis segment-routing adjacency-segments", "desc": "The show isis segment-routing adjacency-segments command displays the global adjacency SID value and other related information." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis segment-routing global-blocks", "cmd": "show isis segment-routing global-blocks", "desc": "The show isis segment-routing global-blocks command lists the SRGBs in use by all SR supporting devices in IS-IS domain including the SRGB in use by IS-IS SR on this device." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis segment-routing", "cmd": "show isis segment-routing", "desc": "The show isis segment-routing command displays the summary information on IS-IS SR status." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis segment-routing tunnel", "cmd": "show isis segment-routing tunnel 10.0.10.1/32", "desc": "The show isis segment-routing tunnel command displays all the IS-IS SR tunnels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "show isis summary", "cmd": "show isis summary\nshow isis [INSTANCES] summary\nshow isis summary VRF_INSTANCE", "desc": "The show isis summary command displays information about the configured IS-IS instances." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "show isis ti-lfa path", "cmd": "show isis ti-lfa path 1111.1111.1005", "desc": "The show isis ti-lfa path command displays the repair path with the list of all the system IDs from the P-node to the Q-node for every destination/constraint tuple." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "exclude node 1111.1111.1002", "cmd": "exclude node 1111.1111.1002", "desc": "exclude Vlan2387 SRLG strict Path" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "show isis ti-lfa tunnel", "cmd": "show isis ti-lfa tunnel", "desc": "The TI-LFA repair tunnels are just internal constructs that are shared by multiple LFIB routes that compute similar repair paths." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor twamp-light", "cmd": "show monitor twamp-light [ip ip_address] detail", "desc": "The show monitor twamp-light displays calculated one way and two way minimum delay." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor twamp-light counters", "cmd": "show monitor twamp-light counters [sender | reflector | drop] detail", "desc": "The show monitor twamp-light counters displays packet counters for TWAMP reflection on the IS-IS network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor twamp-light raw count", "cmd": "show monitor twamp-light [ip | interface] raw count number", "desc": "The show monitor twamp-light raw displays probe packet information for TWAMP reflection on the IS-IS network." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show mpls label ranges", "cmd": "show mpls label ranges", "desc": "The show mpls label ranges command displays the MPLS label range available on a router is categorized into different pools which cater to different applications running on the router." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show mpls lfib route", "cmd": "show mpls lfib route [label_num]", "desc": "The show mpls lfib route command displays the LFIB information for a specified route or for all routes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show mpls segment-routing bindings", "cmd": "show mpls segment-routing bindings", "desc": "The show mpls segment-routing bindings command displays the local label bindings and label bindings on the peer routers for each prefix that has a segment advertised." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show tunnel fib", "cmd": "show tunnel fib ti-lfa 1", "desc": "The show tunnel fib command that displays tunnels programmed in the tunnel FIB also includes the TILFA tunnels along with protected IS-IS SR tunnels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "spf-interval", "cmd": "spf-interval { max-wait seconds | max-wait milliseconds} [initial-wait milliseconds |\nhold-time milliseconds]\nno spf-interval\ndefault spf-interval", "desc": "The spf-interval command sets the Shortest Path First (SPF) timer that defines the interval between ISIS path calculations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "timers local-convergence-delay", "cmd": "timers local-convergence-delay [delay_in_seconds] protected-prefixes", "desc": "The Point of Local Repair (PLR) switches to the TI-LFA backup path on link failure or BFD neighbor failure but switches back to the post-convergence path once the PLR computes SPF and updates its LFIB." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "timers lsp out-delay", "cmd": "timers lsp out-delay transmit_delay\nno timers lsp out-delay\ndefault timers lsp out-delay", "desc": "The timers lsp out-delay command in the IS-IS Router Configuration Mode forces a router to pause before flooding self-originated LSPs after a link or metric decrease event and prevents micro-loops from" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Conceptual Overview", "cmd": "BGP Conceptual Overview", "desc": "Using TCP sessions, the BGP protocol exchanges routing information among neighboring routers in different autonomous systems." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Confederations", "cmd": "BGP Confederations", "desc": "BGP confederations divide an Autonomous System (AS) into subsystems (sub-ASs), each identified by a unique sub-AS number while appearing externally as a single AS." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Convergence", "cmd": "BGP Convergence", "desc": "BGP supports convergence, which waits for all peers to join and receive all the routes from other peers." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Communities", "cmd": "BGP Communities", "desc": "A BGP community is a group of subnet address prefixes that share a common identifying attribute." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Graceful Shutdown Community", "cmd": "BGP Graceful Shutdown Community", "desc": "Autonomous System Boundary Routers (ASBRs) do not update all paths received from external BGP sessions and routers." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Labeled-Unicast (LU) Path Nexthop Resolution over Tunnel RIB Entries", "cmd": "BGP Labeled-Unicast (LU) Path Nexthop Resolution over Tunnel RIB Entries", "desc": "BGP Labeled-Unicast Protocol (BGP LU) path next-hop is enhanced to allow BGP in ribd mode to support resolution of BGP LU path next-hop over entries in the Tunnel RIB and fall-back to resolving over connected" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "labels [111] from 100.100.100.1 (100.100.100.1)", "cmd": "labels [111] from 100.100.100.1 (100.100.100.1)", "desc": "Origin IGP, metric 0, localpref 100, IGP metric 40, weight 0, received 21:07:07 ago, valid, external, not installed Rx SAFI: Labels Tunnel RIB eligible BGP LU path next-hop will get resolved over an ISIS SR tunnel present on R1 and R2 to reach 1." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 100.100.100.1 (100.100.100.1)", "cmd": "from 100.100.100.1 (100.100.100.1)", "desc": "Origin IGP, metric 0, localpref 200, IGP metric 0, weight 0, received 00:00:15 ago, valid, internal, best Rx SAFI: Unicast 2 100" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 1.1.1.1 (1.1.1.1)", "cmd": "from 1.1.1.1 (1.1.1.1)", "desc": "Origin IGP, metric 0, localpref 100, IGP metric 0, weight 0, received 00:04:49 ago, valid, internal Rx SAFI: Unicast 2 200 300" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 2.2.2.2 (2.2.2.2)", "cmd": "from 2.2.2.2 (2.2.2.2)", "desc": "Origin IGP, metric 0, localpref 100, IGP metric 0, weight 0, received 00:30:38 ago, valid, internal Rx SAFI: Unicast This results in pushing two labels on R1, top label is the label corresponding to ISIS SR tunnel to reach" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Selective Route Download", "cmd": "BGP Selective Route Download", "desc": "BGP Selective Route Download allows the learning and advertising of BGP routes without installing them in hardware." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Route Reflector", "cmd": "BGP Route Reflector", "desc": "A BGP route reflector is a switch within an autonomous system that forwards route information learned from iBGP peers to other iBGP peers as an alternative to a full-mesh topology." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Nexthop Resolution RIBs: EVPN and IPV4/6 Labeled-Unicast Support", "cmd": "BGP Nexthop Resolution RIBs: EVPN and IPV4/6 Labeled-Unicast Support", "desc": "Adds the BGP Nexthop Resolution RIBs feature for EVPN and labeled-unicast address families." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Additional Paths Send Optimization", "cmd": "BGP Additional Paths Send Optimization", "desc": "BGP Add-Path TX, or send, allows for a BGP speaker to advertise multiple paths (instead of a single bestpath) for a prefix towards a peering BGP speaker." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Flowspec", "cmd": "BGP Flowspec", "desc": "The EOS Release 4." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP IPv4-mapped IPv6 Address Next Hops for IPv6 Labeled-Unicast Routes", "cmd": "BGP IPv4-mapped IPv6 Address Next Hops for IPv6 Labeled-Unicast Routes", "desc": "A BGP router in an IPv4 network may need to receive or send labeled-unicast routes to and from IPv6 networks." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Monitoring Protocol for a Multi-agent Model", "cmd": "BGP Monitoring Protocol for a Multi-agent Model", "desc": "BGP Monitoring Protocol (BMP) allows a monitoring station to connect to a router and collect all BGP announcements received from the BGP peers of the router." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "BFD Commands", "cmd": "BFD Commands", "desc": "BFD Configuration Command • bfd echo • bfd interval • bfd local-address • bfd neighbor • bfd per-link • bfd slow-timer • hardware acceleration disabled • session stats snapshot interval (BFD) BFD Display Commands" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "bfd (Router-PIM Sparse-mode)", "cmd": "bfd\nno bfd\ndefault bfd", "desc": "The bfd (Router-PIM Sparse-mode) command enables Bidirectional Forwarding Detection (BFD) globally for use as a failure-detection mechanism for Protocol-Independent Multicast Sparse-Mode (PIM-SM) on the switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "bfd default (ISIS)", "cmd": "bfd default", "desc": "The bfd default command places the switch in address-family configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "bfd echo", "cmd": "bfd echo\nno bfd echo\ndefault bfd echo", "desc": "The bfd echo command enables the BFD echo function on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "bfd interval", "cmd": "bfd interval transmit_rate min-rx receive_minimum multiplier factor\nno bfd interval\ndefault bfd interval", "desc": "The bfd interval command configures the BFD control packet transmission rate, minimum control packet receive rate, and the number of missed packets that will signal that the session is down." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "bfd local-address", "cmd": "bfd local-address [address]\nno bfd local-address [address]\ndefault bfd local-address [address]", "desc": "The bfd local-address command specifies the local L3 address for use in Bidirectional Forwarding Detection (BFD)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "bfd neighbor", "cmd": "bfd neighbor [address ]\nno bfd neighbor [address]\ndefault bfd neighbor [address]", "desc": "The bfd neighbor command specifies the L3 address of the BFD neighbor of the port channel being configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "bfd per-link", "cmd": "bfd per-link [rfc-7130]\nno bfd per-link [rfc-7130]\ndefault bfd per-link [rfc-7130]", "desc": "The bfd per-link command enables the BFD per-link function on the port channel being configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "bfd slow-timer", "cmd": "bfd slow-timer receive_minimum\nno bfd slow-timer\ndefault bfd slow-timer", "desc": "The bfd slow-timer command configures the minimum reception rate for BFD control packets which will be used if the BFD echo function is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "bfd qos dscp", "cmd": "qos dscp DSCP_value", "desc": "The bfd qos dscp allows the configuration of the Differentiated Services Code Point (DSCP) for BFD traffic originating from the local switch to take advantage of Quality of Service (QoS) on the network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "hardware acceleration disabled", "cmd": "hardware acceleration disabled", "desc": "Hardware acceleration is enabled by default on supported platforms and no explicit configuration is needed." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "ip ospf neighbor bfd", "cmd": "ip ospf neighbor bfd\nno ip ospf neighbor bfd\ndefault ip ospf neighbor bfd", "desc": "The ip ospf neighbor bfd command enables Bidirectional Forwarding Detection (BFD) for the Open Shortest Path First protocol (OSPF) on the configuration mode interface regardless of the global settings for" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "neighbor bfd", "cmd": "neighbor NEIGHBOR_ID bfd\nno neighbor NEIGHBOR_ID bfd\ndefault neighbor NEIGHBOR_ID bfd", "desc": "The neighbor bfd command enables Bidirectional Forwarding Detection (BFD) for use as a failure detection mechanism for Border Gateway Protocol (BGP) connections to the specified BGP neighbor or peer group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "pim ipv4 bfd", "cmd": "pim ipv4 bfd\nno pim ipv4 bfd\ndefault pim ipv4 bfd", "desc": "The pim ipv4 bfd command enables Bidirectional Forwarding Detection (BFD) on the configuration mode interface as a failure detection mechanism for Protocol-Independent Multicast Sparse-Mode (PIM-SM)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show bfd hardware utilization", "cmd": "show bfd hardware utlization [INFO_LEVEL]", "desc": "The show bfd hardware utilization command displays the status of hardware acceleration on the switch for Bidirectional Forwarding Detection (BFD) session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "from 1.0.10.2 (10.0.1.1)", "cmd": "from 1.0.10.2 (10.0.1.1)", "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:53 ago, valid, external, ECMP head, ECMP, best, ECMP contributor Rx SAFI: Unicast" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "from 1.0.8.2 (10.0.4.1)", "cmd": "from 1.0.8.2 (10.0.4.1)", "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:55 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "from 1.0.9.2 (10.0.3.1)", "cmd": "from 1.0.9.2 (10.0.3.1)", "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:54 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "from 1.0.11.2 (10.0.8.1)", "cmd": "from 1.0.11.2 (10.0.8.1)", "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:52 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "from 1.0.12.2 (10.0.2.1)", "cmd": "from 1.0.12.2 (10.0.2.1)", "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:52 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "from 1.0.13.2 (10.0.5.1)", "cmd": "from 1.0.13.2 (10.0.5.1)", "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:51 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "from 1.0.14.2 (10.0.6.1)", "cmd": "from 1.0.14.2 (10.0.6.1)", "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:50 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "from 1.0.15.2 (10.0.7.1)", "cmd": "from 1.0.15.2 (10.0.7.1)", "desc": "Origin EGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:01:49 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast switch# switch# show ip ro 1." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Peer Filter", "cmd": "peer-filter group1", "desc": "A peer filter defines a set of rules to decide whether to accept or reject the incoming peer request based on the peer’s attributes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Neighbor Route Configuration", "cmd": "neighbor 192.168.18.24 maximum-routes 15000", "desc": "Maximum Routes The neighbor maximum-routes command determines the number of BGP routes the switch accepts from a specified neighbor." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Metric", "cmd": "no graceful-restart-helper", "desc": "LocPref Weight Path 64521 i switch# Graceful Restart Graceful BGP restart allows a BGP speaker with separate control plane and data plane processing to continue forwarding traffic during a BGP restart." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Metric", "cmd": "ip prefix-list PL_1 permit 10.1.2.5/24", "desc": "- AIGP - LocPref Weight Path ? Filtering with BGP Communities Community values are assigned to a set of subnet prefixes through route map set commands." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "s200 i", "cmd": "s200 i", "desc": "switch# configuration terminal switch(config)# route-map foo permit 10 switch(config-route-map-foo)# set as-path match all replacement none switch(config-route-map-foo)# exit switch(config)# router bgp 200" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "AS-path Modifications for Split ASes", "cmd": "AS-path Modifications for Split ASes", "desc": "By default, BGP rejects routes that contain the local Autonomous System Number (ASN)." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "Neighbor Address Family Configuration", "cmd": "router bgp 9", "desc": "Address family activity levels for neighbor addresses are configured through bgp default and neighbor activate commands." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 192.168.14.2 (192.168.100.21)", "cmd": "from 192.168.14.2 (192.168.100.21)", "desc": "Origin IGP, metric 0, localpref 100, weight 0, received 19:15:29 ago, valid, external, ECMP head, ECMP, best, ECMP contributor Rx SAFI: Unicast 64512 64550 65100" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 192.168.24.2 (192.168.100.22)", "cmd": "from 192.168.24.2 (192.168.100.22)", "desc": "Origin IGP, metric 0, localpref 100, weight 0, received 19:15:29 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast Not best: ECMP-Fast configured 64512 64550 65100" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 192.168.34.2 (192.168.100.23)", "cmd": "from 192.168.34.2 (192.168.100.23)", "desc": "Origin IGP, metric 0, localpref 100, weight 0, received 19:15:29 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast Not best: Redistributed route exists 64512 64550 65100" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 192.168.44.2 (192.168.100.24)", "cmd": "from 192.168.44.2 (192.168.100.24)", "desc": "Origin IGP, metric 0, localpref 100, weight 0, received 19:15:29 ago, valid, external, ECMP, ECMP contributor Rx SAFI: Unicast Not best: eBGP path preferred Not advertised to any peer switch#" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "from 1.0.0.1 (1.0.0.1)", "cmd": "show ip bgp installed", "desc": "Origin INCOMPLETE, metric 0, localpref 100, weight 0, valid, internal, not installed (denied by install-map) switch# The show ip bgp installed command displays the list of installed routes in the BGP RIB." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "Metric", "cmd": "show ip bgp not-installed", "desc": "LocPref Weight Path ? The show ip bgp not-installed displays the list of non-installed routes in the RIB." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "Metric", "cmd": "router bgp num", "desc": "LocPref Weight Path ? Configuring Nexthop Resolution The configuration model for this feature involves configuring and applying Nexthop Resolution RIB Profiles on a per-address family basis." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Default Resolution Profiles", "cmd": "Default Resolution Profiles", "desc": "Given the aforementioned configuration model, the default resolution profiles in EOS for each address-family can be expressed by the following: Address-family Default profile IPv4/IPv6 unicast (non 6PE)" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP L3VPNs: Next-hop Resolution ribs vrf-unicast-rib", "cmd": "BGP L3VPNs: Next-hop Resolution ribs vrf-unicast-rib", "desc": "This subfeature affects both the profile used to resolve BGP VPN routes as well as the VRF in which the route resolution takes place." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Next Hop Resolution with IGP Distance", "cmd": "BGP Next Hop Resolution with IGP Distance", "desc": "A core router with competing advertisements for the same prefixes from different Perimeter Edge (PE) routers should select the local Edge Router (ER) as the best path based on the IGP metric of resolving routes with" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 3.3.3.3 (3.3.3.3)", "cmd": "from 3.3.3.3 (3.3.3.3)", "desc": "Origin IGP, metric 0, localpref 100, IGP metric 20, weight 0, tag 0 Received 00:02:02 ago, valid, internal, best Rx SAFI: Unicast BGP routing table entry for 2." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 4.4.4.4 (4.4.4.4)", "cmd": "from 4.4.4.4 (4.4.4.4)", "desc": "Origin IGP, metric 0, localpref 100, IGP metric 30, weight 0, tag 0 Received 00:02:02 ago, valid, internal, best Rx SAFI: Unicast BGP routing table entry for 10." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Flowspec Interface-Set Extended Community", "cmd": "BGP Flowspec Interface-Set Extended Community", "desc": "BGP Flowspec leverages BGP extended communities to disseminate and apply traffic filtering rules across a network." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show bgp instance", "cmd": "show bgp instance [VRF_INSTANCE]", "desc": "The show bgp instance command displays summary Border Gateway Protocol (BGP) information about the BGP instance in the specified VRF or in all VRFs." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show bgp monitoring", "cmd": "show bgp monitoring summary", "desc": "The show bgp monitoring command displays information about the BGP Monitoring Protocol configuration on a switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show bgp monitoring active", "cmd": "show bgp monitoring active [summary | [station station_name]]", "desc": "The show bgp monitoring active command displays information about stations in Active Mode and receiving TCP connection requests from a BGP router." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show bgp neighbors history", "cmd": "show bgp neighbors [PEER | PREFIX | peer-group PEER_GROUP] history [connect-failures | socket", "desc": "The show bgp neighbors history command stores and displays a list of failed BGP connection attempts for each peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "VRF default", "cmd": "VRF default", "desc": "Type AS Time Static 65538 Mon 2019-05-13 04:16:24 Static 65538 Mon 2019-05-13 04:16:31 Static 65538 Mon 2019-05-13 04:16:39 Static 65538 Mon 2019-05-13 04:16:47 Static 65538 Mon 2019-05-13 04:16:55 Static" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show bgp monitoring station", "cmd": "show bgp monitoring station station_name detail", "desc": "The show bgp monitoring station command displays details about a specific BMP monitoring station." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show bgp summary passive", "cmd": "show bgp monitoring active [summary | vrf vrf_name]", "desc": "The show bgp monitoring passive command displays information about BMP monitoring stations with Passive mode connections." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show bgp update-group", "cmd": "show bgp update-group", "desc": "The show bgp update-group command displays how peers are grouped into update groups and can be used to verify that peers with different RCF functions with identical contents are grouped together." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show flow-spec", "cmd": "show flow-spec (ipv4 | ipv6) [summary][vrf VRFNAME]", "desc": "The show flow-spec command displays an overall status of how many flowspec rules were received and how many were installed." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "show ip as-path access-list", "cmd": "show ip as-path access-list [list_name]", "desc": "The show ip as-path access-list command displays BGP filters on the switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip bgp", "cmd": "show ip bgp [FILTER][VRF_INSTANCE]", "desc": "The show ip bgp command displays Border Gateway Protocol (BGP) IPv4 routing table entries." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Metric", "cmd": "Metric", "desc": "LocPref Weight Path 300 ? 300 ? 300 ? switch# show ip bgp community 2:2 BGP routing table information for VRF default Router identifier 220." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Automatic Route Distinguisher", "cmd": "BGP Automatic Route Distinguisher", "desc": "For BGP EVPN VXLAN fabrics, automatic route distinguisher (RD) generation simplifies the network configuration by automatically generating unique RD values based on the BGP Router ID and the VRF ID, eliminating manual RD configuration." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Peer Tagging and Route Filtering", "cmd": "BGP Peer Tagging and Route Filtering", "desc": "Peer Tagging and Route Filtering allows or discards BGP route advertisements from peers with received routes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Operational Commands", "cmd": "BGP Operational Commands", "desc": "Displaying BGP Monitoring Protocol Status" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP IPv6 Link Local Peers Discovery", "cmd": "BGP IPv6 Link Local Peers Discovery", "desc": "BGP IPv6 Link Local Peers Discovery supports a dynamic configuration model to eliminate the need for the network administrator to assign and configure IPv6 addresses for BGP peering." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Examples", "cmd": "BGP Examples", "desc": "This section shows example configurations and topologies for iBGP (BGP Example 1) and eBGP (BGP Example 2)." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Example 1", "cmd": "BGP Example 1", "desc": "Example 1 features an internal BGP (iBGP) link that connects peers in AS 100." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Example 1 Diagram", "cmd": "BGP Example 1 Diagram", "desc": "Figure 16-18: BGP Example 1 displays an iBGP connection, linking neighbors within AS 100." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Example 1 Code", "cmd": "BGP Example 1 Code", "desc": "This code configures the Example 1 BGP instance on both switches." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Example 2", "cmd": "BGP Example 2", "desc": "Example 2 creates an external BGP (eBGP) link that connects routers in AS 100 and AS 200." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Example 2 Diagram", "cmd": "BGP Example 2 Diagram", "desc": "Figure 16-19: BGP Example 2 displays an eBGP connection, linking Switch A in AS 100 to Switch B in AS 200." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Example 2 Code", "cmd": "BGP Example 2 Code", "desc": "This code configures the Example 2 BGP instance on both switches." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Commands", "cmd": "BGP Commands", "desc": "Global Configuration Commands • ip as-path access-list • ip as-path regex-mode • ip community-list • ip community-list regexp • ip extcommunity-list • ip extcommunity-list regexp • ip large-community-list regexp" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "address-family", "cmd": "bgp [ipv4 | ipv6]\nno bgp [ipv4 | ipv6]\ndefault bgp [ipv4 | ipv6]", "desc": "The address-family command places the switch in address-family configuration mode to configure the address family setting of addresses configured as BGP neighbors." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "address-family flow-spec", "cmd": "address-family flow-spec [ipv4 | ipv6] route-target redirect vrf lpm\naddress-family flow-spec [ipv4 | ipv6] route-target redirect vrf lpm\naddress-family flow-spec [ipv4 | ipv6] route-target redirect vrf lpm", "desc": "Use the address-family flow-spec command to filter or redirect DDoS traffic on edge routers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "address-family flow-spec neighbor", "cmd": "address-family flow-spec [ipv4 | ipv6] neighbor ip_address [activate | sendcommunity extended]\nno address-family flow-spec [ipv4 | ipv6] neighbor ip_address [activate | sendcommunity extended]\ndefault address-family flow-spec [ipv4 | ipv6] neighbor ip_address [activate |\nsend-community extended]", "desc": "The address-family flow-spec neighbor command in the BGP Router Configuration Mode enables Flowspec on a BGP configuration to filter or redirect DDoS traffic on edge routers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "aggregate-address", "cmd": "aggregate-address AGGREGATE_NET [AS_SET][SUMMARY][ATTRIBUTE_MAP][MATCH_MAP]\nno aggregate-address AGGREGATE_NET\ndefault aggregate-address AGGREGATE_NET", "desc": "The aggregate-address command creates an aggregate route in the Border Gateway Protocol (BGP) database." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "authentication-key", "cmd": "authentication-key key", "desc": "The authentication-key command adds security to the TCP session to the BMP monitoring station." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp advertise-inactive", "cmd": "bgp advertise-inactive\nno bgp advertise-inactive\ndefault bgp advertise-inactive", "desc": "By default, BGP will advertise only those routes that are active in the switch’s RIB." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp always-compare-med", "cmd": "bgp always-compare-med\nno bgp always-compare-med\ndefault bgp always-compare-med", "desc": "The bgp always-compare-med command configures the switch to always consider Multi-Exit Discriminator (MED) values (also known as “metric”) in best-path selection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "bgp bestpath as-path ignore", "cmd": "bgp bestpath as-path ignore\nno bgp bestpath as-path ignore\ndefault bgp bestpath as-path ignore", "desc": "The bgp bestpath as-path ignore command configures BGP to ignore the length of the Autonomous System (AS) path when comparing routes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "bgp bestpath as-path multipath-relax", "cmd": "bgp bestpath as-path multipath-relax\nno bgp bestpath as-path multipath-relax\ndefault bgp bestpath as-path multipath-relax", "desc": "The bgp bestpath as-path multipath-relax command allows multiple eBGP routes to a destination to be considered equal in ECMP if their AS paths are the same length despite having different autonomous systems in those paths." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "bgp bestpath d-path", "cmd": "bgp bestpath d-path\nno bgp bestpath d-path\ndefault bgp bestpath d-path", "desc": "The bgp bestpath d-path command configures BGP to use the domain path length in bestpath route selection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "bgp bestpath ecmp-fast", "cmd": "bgp bestpath ecmp-fast\nno bgp bestpath ecmp-fast\ndefault bgp bestpath ecmp-fast", "desc": "By default, within an ECMP group the BGP best-path selection process prefers the active path (the first path received by the switch) unless a relevant tie-breaker is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "bgp bestpath med confed", "cmd": "bgp bestpath med confed [missing-as-worst]\nno bgp bestpath med confed [missing-as-worst]\ndefault bgp bestpath med confed [missing-as-worst]", "desc": "By default, paths originating within the same confederation as the switch and received from confederation peers do not have their Multi-Exit Discriminator (MED) values compared as part of the best-path selection" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "bgp bestpath med missing-as-worst", "cmd": "bgp bestpath med missing-as-worst\nno bgp bestpath med missing-as-worst\ndefault bgp bestpath med missing-as-worst", "desc": "By default, BGP best-path selection considers a missing MED value to be 0, so paths with missing MED values will be preferred." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "bgp bestpath tie-break cluster-list-length", "cmd": "bgp bestpath tie-break cluster-list-length\nno bgp bestpath tie-break cluster-list-length\ndefault bgp bestpath tie-break cluster-list-length", "desc": "The bgp bestpath tie-break cluster-list-length command causes the best-path selection process to prefer the multipath route with the shortest CLUSTER_LIST length in case of a tie in step 10." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "bgp bestpath tie-break router-id", "cmd": "bgp bestpath tie-break router-id\nno bgp bestpath tie-break router-id\ndefault bgp bestpath tie-break router-id", "desc": "The bgp bestpath tie-break router-id command causes the best-path selection process to prefer the multipath route with the lowest ROUTER_ID in case of a tie in step 10." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp client-to-client reflection", "cmd": "bgp client-to-client reflection\nno bgp client-to-client reflection\ndefault bgp client-to-client reflection", "desc": "By default, routes received from a route reflector client and selected as best routes are propagated to all BGP peers, including other route reflector clients." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp cluster-id", "cmd": "bgp cluster-id ID_NUM\nno bgp cluster-id\ndefault bgp cluster-id", "desc": "When using route reflectors, an AS is divided into clusters." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp confederation identifier", "cmd": "bgp confederation identifier as_number\nno bgp confederation identifier\ndefault bgp confederation identifier", "desc": "The bgp confederation identifier command configures the confederation identifier." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp confederation peers", "cmd": "bgp confederation peers as_range\nno bgp confederation peers as_range\ndefault bgp confederation peers as_range", "desc": "The bgp confederation peers command configures a confederation consisting of sub-ASs." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp convergence time", "cmd": "bgp convergence time timeout_range\nno bgp convergence time\ndefault bgp convergence time", "desc": "The bgp convergence time command configures the time BGP waits before declaring all BGP sessions as converged, whether or not a EOR message has been received." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp convergence slow-peer time", "cmd": "bgp convergence slow-peer time timeout\nno bgp convergence slow-peer time\ndefault bgp convergence slow-peer time", "desc": "The bgp convergence slow-peer time command configures the idle peer time to wait for the slow peers to establish a session in a BGP convergence state." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp default", "cmd": "bgp default ADDRESS_FAMILY\nno bgp default ADDRESS_FAMILY\ndefault bgp default ADDRESS_FAMILY", "desc": "The bgp default command configures the default address family activation level of all addresses configured as BGP neighbors." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp enforce-first-as", "cmd": "bgp enforce-first-as\ndefault bgp enforce-first-as\nno bgp enforce-first-as", "desc": "The bgp enforce-first-as command causes a forced comparison of the first Autonomous System (AS) in the AS path of eBGP routes received from BGP neighbors to the configured remote external peer Autonomous System Number (ASN)." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp listen range", "cmd": "bgp listen range NET_ADDRESS [PEER-ID include router-id ] peer-group group_name [remote-as\nas_number | peer-filter filter_name]\nno bgp listen range NET_ADDRESS peer-group group_name\ndefault bgp listen range NET_ADDRESS peer-group group_name", "desc": "The bgp listen range command identifies the BGP peering request from a range of IPv4 or IPv6 address, and names the dynamic peer group to which those peers belong to." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp log-neighbor-changes", "cmd": "bgp log-neighbor-changes\nno bgp log-neighbor-changes\ndefault bgp log-neighbor-changes", "desc": "The bgp log-neighbor-changes command configures the switch to generate a log message when a BGP peer enters or exits the established state." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp monitoring", "cmd": "bgp monitoring", "desc": "The bgp monitoring command enters the Router BGP Monitoring Configuration Mode on the switch, and configures BGP Monitoring Protocol on the switch" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp redistribute-internal (BGP)", "cmd": "bgp redistribute internal\nno bgp redistribute internal\ndefault bgp redistribute internal", "desc": "The bgp redistribute-internal command enables the redistribution of iBGP routes into an Interior Gateway Protocol (IGP)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "bgp rib bestpaths monitoring", "cmd": "bgp rib bestpaths monitoring [disabled]", "desc": "The bgp rib bestpaths monitoring globally enables or disables exporting all Local Routing Information Bases (Loc_RIB) for all BGP VRFs in a BGP VRF configuration." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp rib received routes monitoring disabled", "cmd": "bgp rib received routes monitoring disabled\nno bgp rib received routes monitoring disabled\ndefault bgp rib received routes monitoring disabled", "desc": "The bgp rib received routes monitoring disabled allows filtering of Adjacency-RIB-In (AdjRIB-In) exports for BGP Monitoring Protocol and prevents a VRF from exporting the Adj-RIB-In." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp route install-map", "cmd": "bgp route install-map map_name", "desc": "The bgp route install-map command enables BGP Selective Route Download on the switch and allows the learning and advertising of the BGP routes without installing them in hardware." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp route-reflector preserve-attributes", "cmd": "bgp route-reflector preserve-attributes [always]\nno bgp route-reflector preserve-attributes\ndefault bgp route-reflector preserve-attributes", "desc": "The bgp route-reflector preserve-attributes command configures the switch, when operating as a BGP route reflector, to preserve the BGP attributes of re-advertised routes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "clear bgp history", "cmd": "clear bgp [PEER | PREFIX | peer-group PEER_GROUP] history [connect-failures] [vrf VRF]", "desc": "To clear all messages for a peer or group of peers, use the clear bgp history command ." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "clear ip bgp", "cmd": "clear ip bgp [PEERS] [RESET_TYPE] [DATA_FLOW] [VRF_INSTANCE]", "desc": "The clear ip bgp command removes learned BGP routes from the routing table, reads all routes from designated peers, and sends routes to those peers as required." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "clear ip bgp counters", "cmd": "clear ip bgp [PEERS] counters [VRF_INSTANCES]", "desc": "The clear ip bgp counters command resets general statistics of peers." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "clear ip bgp errors", "cmd": "clear ip bgp [PEERS] errors [VRF_INSTANCES]", "desc": "The clear ip bgp errors command resets the error statistics and history of peers." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "clear ip bgp neighbor", "cmd": "clear ip bgp neighbor [*] [vrf vrf_name] [reason", "desc": "The clear ip bgp neighbor command clears BGP neighbors belonging to the IPv4 transport address family." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "clear ipv6 bgp", "cmd": "clear ipv6 bgp [PEERS] [RESET_TYPE] [DATA_FLOW] [VRF_INSTANCE]", "desc": "The clear ipv6 bgp command removes learned BGP routes from the routing table, reads all routes from designated peers, and sends routes to those peers as required." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "clear ipv6 bgp counters", "cmd": "clear ipv6 bgp [PEERS] counters [VRF_INSTANCES]", "desc": "The clear ipv6 bgp counters command resets general statistics of peers." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "clear ipv6 bgp errors", "cmd": "clear ipv6s bgp [PEERS] errors [VRF_INSTANCES]", "desc": "The clear ipv6 bgp errors command resets the error statistics and history of peers." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "clear ipv6 bgp neighbor", "cmd": "clear ipv6 bgp neighbor [*] [vrf vrf_name] [reason message]", "desc": "The clear ipv6 bgp neighbor command clears BGP neighbors belonging to the IPv6 transport address family." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "connection address", "cmd": "connection address ip_address vrf vrf_name", "desc": "The connection address command configures an IP address on a BMP monitoring station." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "connection keepalive", "cmd": "connection keepalive [idletime seconds | probe-interval seconds | probe-count num]", "desc": "The connection keepalive command checks on the health of the TCP connection with the BMP monitoring station." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "connection mode", "cmd": "connection mode [[active port port_number] | [reconnect-timer timer_value] | [connection mode passive]]", "desc": "The connection mode command configures TCP connection parameters for a BMP monitoring station." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "description", "cmd": "description text", "desc": "The description command adds a description of the BMP monitoring station to display in the show bgp station output." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "distance bgp", "cmd": "distance bgp external_dist [INTERNAL_LOCAL]\nno distance bgp\ndefault distance bgp", "desc": "The distance bgp command assigns an administrative distance to routes that the switch learns through BGP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "dynamic peer max", "cmd": "dynamic peer max maximum\nno dynamic peer max\ndefault dynamic peer max", "desc": "The dynamic peer max command limits the number of dynamic BGP peers allowed on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "export-policy received routes", "cmd": "export-policy received routes additional-paths [post-policy | pre-policy]", "desc": "The export-policy command configures the BMP monitoring station to receive additional paths advertisements from BGP peers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "graceful-restart stalepath-time", "cmd": "graceful-restart stalepath-time interval\nno graceful-restart stalepath-time\ndefault graceful-restart stalepath-time", "desc": "The graceful-restart stalepath-time command specifies the maximum time that stale routes from a restarting BGP neighbor will be retained after a BGP session is re-established with that peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "graceful-restart-helper", "cmd": "graceful-restart helper long-lived\nno graceful-restart helper long-lived\ndefault graceful-restart helper long-lived", "desc": "The graceful-restart helper command enables BGP graceful restart helper mode on the switch for all BGP neighbors." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "interface-set count", "cmd": "interface-set count", "desc": "The interface-set count command supports BGP Flowspec Interface-set Extended Community and allows BGP Flowspec rules to be selectively applied to sets of forwarding interfaces sharing a common group identifier." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "ip as-path access-list", "cmd": "ip as-path access-list list_name FILTER_TYPE regex ORIGIN\nno ip as-path access-list list_name\ndefault ip as-path access-list list_name", "desc": "The ip as-path access-list command creates an access list to filter BGP route updates." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip as-path regex-mode", "cmd": "ip as-path regex-mode MODE_SETTING\nno ip as-path regex-mode\ndefault ip as-path regex-mode", "desc": "The ip as-path regex-mode command specifies how the switch will evaluate regular expressions describing AS paths in ACLs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip community-list", "cmd": "no ip community-list list_name\ndefault ip community-list list_name", "desc": "The ip community-list command creates and configures a BGP access list based on BGP communities." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip community-list regexp", "cmd": "ip community-list regexp list_name {deny | permit} reg_exp\nno ip community-list regexp list_name {deny | permit} reg_exp\ndefault ip community-list regexp list_name", "desc": "The ip community-list regexp command creates and configures a BGP access list based on BGP communities." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip extcommunity-list", "cmd": "ip extcommunity-list list_name {deny | permit} COMM_1 [COMM_2...COMM_n]\nno ip extcommunity-list list_name\ndefault ip extcommunity-list list_name", "desc": "The ip extcommunity-list command creates an extended community list to filter VRF routes or for Link BandWidth (LBW) advertisement." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip extcommunity-list regexp", "cmd": "ip extcommunity-list regexp list_name {deny | permit} reg_exp\nno ip extcommunity-list regexp list_name {deny | permit} reg_exp\ndefault ip extcommunity-list regexp list_name", "desc": "The ip extcommunity-list regexp command creates an extended community list to filter VRF routes or for link bandwidth (LBW) advertisement." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "ip large-community-list regexp", "cmd": "ip large-community-list regexp list_name {deny | permit} reg_exp\nno ip large-community-list regexp list_name {deny | permit} reg_exp\ndefault ip large-community-list regexp list_name", "desc": "The ip large-community-list regexp command creates and configures a BGP access list based on BGP large communities." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "match as-range", "cmd": "no match as-range [as_number1] [as_number2] result {accept | reject} group_name\ndefault match as-range [as_number1] [as_number2] result {accept | reject} group_name", "desc": "The match as-range command defines the match statement for the peer-filter, based on the match statement the peer-filter accept or reject the incoming peer request." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "maximum-paths (BGP)", "cmd": "maximum-paths paths [ecmp ecmp_paths]\nno maximum-paths\ndefault maximum-paths", "desc": "The maximum-paths command controls the maximum number of parallel BGP routes that the switch supports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "monitoring bgp rib bestpaths", "cmd": "monitoring bgp rib bestpaths\nmonitoring bgp rib bestpaths disable", "desc": "The monitoring bgp rib bestpaths command configures exporting the BGP Local RIB to all monitoring stations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitoring port", "cmd": "monitoring port port_number", "desc": "The monitoring port command configures a port number for stations in passive mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitoring qos", "cmd": "monitoring qos dscp dscp_value", "desc": "The monitoring qos command configures the DSCP value for BMP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitoring received", "cmd": "monitoring received routes [pre-policy | post-policy]\nno monitoring received routes [pre-policy | post-policy]", "desc": "The monitoring received command configures the BGP router to advertise pre-policy and post-policy routes to a BMP monitoring station." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitoring station", "cmd": "monitoring station station_name", "desc": "The monitoring station command configures a name for the BMP monitoring station and places the switch in Monitoring Switch Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitoring statistics", "cmd": "monitoring statistics [interval interval_seconds]", "desc": "The monitoring statistics command generates statistics counters for BMP and disabled by default for all monitoring stations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitoring timestamp", "cmd": "monitoring timestamp [send-time | none]", "desc": "The monitoring timestamp command sets the timestamp in BMP Route Monitoring messages to zero or the time of message construction." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor", "cmd": "neighbor [ipv4 [send-community [large]]| ipv6 | NAME | default | fe80::A:B:C:D% interface | interface]", "desc": "Use the neighbor command to enable large communities on a ‘per-neighbor’ or ‘per-peer group’ basis." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor activate", "cmd": "neighbor neighbor_ID activate\nno neighbor neighbor_ID activate\ndefault neighbor neighbor_ID activate", "desc": "The neighbor activate command defines the configuration mode address family activation state of a specified address that is configured as a BGP neighbor." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor allowas-in", "cmd": "neighbor neighbor_ID allowas-in [asn_quantity]\nno neighbor neighbor_ID allowas-in\ndefault neighbor neighbor_ID allowas-in", "desc": "By default, BGP drops received routes if their Autonomous System (AS) paths contain the AS Number (ASN) of the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor as-path remote-as replace out", "cmd": "neighbor neighbor_ID as-path remote-as replace out\nno neighbor neighbor_ID as-path remote-as replace out\ndefault neighbor neighbor_ID as-path remote-as replace out", "desc": "By default, BGP drops received routes if their Autonomous System (AS) paths contain the AS Number (ASN) of the switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "in BGP routes advertised to that neighbor.", "cmd": "in BGP routes advertised to that neighbor.", "desc": "switch(config)# router bgp 1 switch(config-router-bgp)# neighbor 192." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor auto-local-addr", "cmd": "neighbor neighbor_ID auto-local-addr\nno neighbor neighbor_ID auto-local-addr\ndefault neighbor neighbor_ID auto-local-addr", "desc": "The neighbor auto-local-addr command configures the switch to automatically determine the local address to be used for the non-transport address family in NLRIs sent to the specified neighbor or peer group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "neighbor default-originate", "cmd": "neighbor neighbor_ID default-originate [MAP]\nno neighbor neighbor_ID default-originate\ndefault neighbor neighbor_ID default-originate", "desc": "The neighbor default-originate command advertises a default route to a BGP neighbor or peer group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor description", "cmd": "neighbor neighbor_ID description description_string\nno neighbor neighbor_ID description\ndefault neighbor neighbor_ID description", "desc": "The neighbor description command associates descriptive text with the specified peer or peer group." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "neighbor ebgp-multihop", "cmd": "neighbor neighbor_ID ebgp-multihop [hop_number]\nno neighbor neighbor_ID ebgp-multihop\ndefault neighbor neighbor_ID ebgp-multihop", "desc": "The neighbor ebgp-multihop command programs the switch to accept and attempt BGP connections to the external peers residing on networks not directly connected to the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor enforce-first-as", "cmd": "neighbor neighbor_ID enforce-first-as\nno neighbor neighbor_ID enforce-first-as\ndefault neighbor neighbor_ID enforce-first-as", "desc": "The neighbor enforce-first-as command causes a forced comparison of the first Autonomous System (AS) in the AS path of eBGP routes received from a specified BGP peer or peer group to the configured remote external peer Autonomous System Number (ASN)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor export-localpref", "cmd": "neighbor neighbor_ID export-localpref preference\nno neighbor neighbor_ID export-localpref\ndefault neighbor neighbor_ID export-localpref", "desc": "The neighbor export-localpref command determines the LOCAL_PREF value that is sent in BGP UPDATE packets to the specified peer or peer group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor graceful-restart", "cmd": "neighbor neighbor_ID graceful-restart\nno neighbor neighbor_ID graceful-restart\ndefault neighbor neighbor_ID graceful-restart", "desc": "The neighbor graceful-restart command enables the BGP graceful restart mode for a specified BGP neighbor or peer group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor graceful-restart-helper", "cmd": "neighbor neighbor_ID graceful-restart helper long-lived\nno neighbor neighbor_ID graceful-restart helper long-lived\ndefault neighbor neighbor_ID graceful-restart helper long-lived", "desc": "The neighbor graceful-restart helper command enables BGP graceful restart helper mode for the specified BGP neighbor or peer group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor import-localpref", "cmd": "neighbor neighbor_ID import-localpref preference\nno neighbor neighbor_ID import-localpref\ndefault neighbor neighbor_ID import-localpref", "desc": "The neighbor import-localpref command determines the local preference assigned to routes received from the specified external peer or peer group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor local-as", "cmd": "neighbor neighbor_ID [local-as as_id] ]no-prepend | replace-as]\nno neighbor neighbor_ID local-as\ndefault neighbor neighbor_ID local-as", "desc": "The neighbor local-as command changes the local AS value sent to the specified peer in OPEN messages, allowing the switch to appear as a member of a different AS to the selected peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor local-v4-addr", "cmd": "neighbor neighbor_ID local-v4-addr ipv4_local\nno neighbor neighbor_ID local-v4-addr\ndefault neighbor neighbor_ID local-v4-addr", "desc": "The neighbor local-v4-addr command specifies the next-hop value that the switch sends as the IPv4 NLRI value to neighbors with whom IPv6 transport peering is established." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor local-v6-addr", "cmd": "neighbor neighbor_ID local-v6-addr ipv6_local\nno neighbor neighbor_ID local-v6-addr\ndefault neighbor neighbor_ID local-v6-addr", "desc": "The neighbor local-v6-addr command specifies the next-hop value that the switch sends as the IPv6 NLRI value to neighbors with which IPv4 transport peering is established." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor maximum-routes", "cmd": "neighbor neighbor_ID maximum-routes quantity [action]\nno neighbor neighbor_ID maximum-routes\ndefault neighbor neighbor_ID maximum-routes", "desc": "The neighbor maximum-routes command determines the number of BGP routes the switch accepts from a specified neighbor and defines an action after exceeding the limit." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor next-hop-peer", "cmd": "neighbor neighbor_ID next-hop-peer\nno neighbor neighbor_ID next-hop-peer\ndefault neighbor neighbor_ID next-hop-peer", "desc": "The neighbor next-hop-peer command configures the switch to list the peer address as the next hop in routes that it receives from the specified peer BGP-speaking neighbor or members of the specified peer" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor next-hop-self", "cmd": "neighbor neighbor_ID next-hop-self\nno neighbor neighbor_ID next-hop-self\ndefault neighbor neighbor_ID next-hop-self", "desc": "The neighbor next-hop-self command configures the switch to list its address as the next hop in routes that it advertises to the specified BGP-speaking neighbor or neighbors in the specified peer group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor next-hop resolution v4-mapped-v6 translation", "cmd": "neighbor {neighbor_ID} next-hop resolution v4-mapped-v6 translation\nno neighbor {neighbor_ID} next-hop resolution v4-mapped-v6 translation\ndefault neighbor {neighbor_ID} next-hop resolution v4-mapped-v6 translation", "desc": "The neighbor next-hop resolution v4-mapped-v6 translation command configures the switch to enable translation of IPv4-mapped IPv6 addresses to IPv4 addresses." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor out-delay", "cmd": "neighbor neighbor_ID out-delay delay_time\nno neighbor neighbor_ID out-delay delay_time\ndefault neighbor neighbor_ID out-delay delay_time", "desc": "The neighbor out-delay command sets the period of time that a route update for the specified neighbor must be in the routing table before the switch exports it to BGP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor passive", "cmd": "neighbor neighbor_ID passive\nno neighbor neighbor_ID passive\ndefault neighbor neighbor_ID passive", "desc": "The neighbor passive command sets the TCP connection for the specified BGP neighbor or peer group to passive mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor password", "cmd": "neighbor neighbor_ID password [ENCRYPT_LEVEL] key_text\nno neighbor neighbor_ID password\ndefault neighbor neighbor_ID password", "desc": "The neighbor password command enables authentication on a TCP connection with a BGP peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor peer group (create)", "cmd": "neighbor group_name peer group\nno neighbor group_name peer group\ndefault neighbor group_name peer group", "desc": "Peer groups allow the user to apply settings to a group of BGP neighbors simultaneously." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor peer group (neighbor assignment)", "cmd": "neighbor NEIGHBOR_ADDR peer group group_name\nno neighbor NEIGHBOR_ADDR peer group\ndefault neighbor NEIGHBOR_ADDR peer group", "desc": "Peer groups allow the user to apply settings to a group of BGP neighbors simultaneously." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor peer-tag", "cmd": "neighbor peer_group_name peer-tag [in tag_name] [out [discard | allow] tag_name]\naddress-family [ipv4 | ipv6] neighbor peer_group_name peer-tag [in tag_name]\nno neighbor peer_group_name peer-tag\ndefault no neighbor peer_group_name peer-tag>", "desc": "The neighbor peer-tag command in the BGP Configuration or BGP Address-Family Configuration Mode configures peer tagging and route filtering for BGP route advertisements by received routes from peers." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "neighbor received attribute discard", "cmd": "neighbor [default | ipv4 | ipv6] received attribute discard bgp_attribute_type\nIPv6 address to apply the configuration to a specific BGP neighbor.", "desc": "The neighbor received attribute discard command allows the configuration of BGP Attribute Ignore Received Lists to discard update messages with a BGP attribute." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor remote-as", "cmd": "neighbor neighbor_ID remote-as as_id\nno neighbor neighbor_ID remote-as\ndefault neighbor neighbor_ID remote-as", "desc": "The neighbor remote-as command configures the expected AS Number for a neighbor (peer)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor remove-private-as", "cmd": "neighbor neighbor_ID remove-private-as [REMOVAL]\nno neighbor neighbor_ID remove-private-as\ndefault neighbor neighbor_ID remove-private-as", "desc": "The neighbor remove-private-as command removes private autonomous system numbers from outbound routing updates for external BGP (eBGP) neighbors." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor rib-in delay", "cmd": "neighbor peer rib-in delay seconds event peer-init", "desc": "The neighbor rib-in delay command configures an inbound delay for installing routes from a peer on a BGP network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor rib-in pre-policy retain", "cmd": "neighbor neighbor_ID rib-in pre-policy retain [all]\nno neighbor neighbor_ID rib-in pre-policy retain\ndefault neighbor neighbor_ID rib-in pre-policy retain", "desc": "By default, inbound BGP routes that are filtered out by the inbound policy are still stored on the switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "neighbor route-map (BGP)", "cmd": "neighbor neighbor_ID route-map map_name [in | out]", "desc": "The neighbor route-map command applies a route map to inbound or outbound BGP routes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor route-reflector-client", "cmd": "neighbor neighbor_ID route-reflector-client\nno neighbor neighbor_ID route-reflector-client\ndefault neighbor neighbor_ID route-reflector-client", "desc": "Participating BGP routers within an AS communicate eBGP-learned routes to all of their peers, but to prevent routing loops they must not re-advertise iBGP-learned routes within the AS." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor route-to-peer", "cmd": "neighbor neighbor_ID route-to-peer\nno neighbor neighbor_ID route-to-peer\ndefault neighbor neighbor_ID route-to-peer", "desc": "The neighbor route-to-peer command allows BGP to establish a connection to reach the specified peer using kernel routing table information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor send-community", "cmd": "neighbor neighbor_ID send-community [extended] [large][standard]", "desc": "The neighbor send-community command configures the switch to include community path attributes for routes in the UPDATE messages advertised to the specified BGP neighbor." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor send-community add / remove", "cmd": "neighbor neighbor_ID send-community {add | remove}{extended | large | standard}", "desc": "The neighbor send-community add / remove command modifies the types of community path attributes included for routes in the UPDATE messages advertised to the specified BGP neighbor without having to issue the neighbor send-community command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor send-community link-bandwidth", "cmd": "neighbor neighbor_ID send-community link-bandwidth {aggregate [reference_speed] | divide\nno neighbor neighbor_ID send-community\ndefault neighbor neighbor_ID send-community", "desc": "The neighbor send-community link-bandwidth command is used to locally regenerate the link-bandwidth value to be advertised to a specific BGP neighbor or peer group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor shutdown", "cmd": "neighbor neighbor_ID shutdown reason REASON", "desc": "The neighbor shutdown command disables the specified neighbor." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor timers", "cmd": "neighbor neighbor_ID timers keep_alive hold_time\nno neighbor neighbor_ID timers\ndefault neighbor neighbor_ID timers", "desc": "The neighbor timers command configures the BGP keepalive and hold times for a specified peer connection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor ttl maximum-hops", "cmd": "neighbor neighbor_ID ttl maximum-hops hop_number\nno sneighbor neighbor_ID ttl maximum-hops\ndefault neighbor neighbor_ID ttl maximum-hops", "desc": "The neighbor ttl maximum-hops command configures the Generalized TTL Security Mechanism (GTSM) for the specified neighbor(s)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor update-source", "cmd": "neighbor neighbor_ID update-source INTERFACE\nno neighbor neighbor_ID update-source\ndefault neighbor neighbor_ID update-source", "desc": "The neighbor update-source command specifies the interface that BGP sessions use for TCP connections." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "neighbor weight", "cmd": "neighbor neighbor_ID weight weight_value\nno neighbor neighbor_ID weight\ndefault neighbor neighbor_ID weight", "desc": "The neighbor weight command assigns a weight attribute value to paths from the specified neighbor." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "next-hop resolution route", "cmd": "next-hop resolution rout igp-nexthop-cost protocol bgp", "desc": "The next-hop resolution route command configures BGP with next hop resolution with IGP distance on the switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "network (BGP)", "cmd": "network NET_ADDRESS [ROUTE_MAP]\nno network NET_ADDRESS\ndefault network NET_ADDRESS", "desc": "The network command specifies a network for advertisement through UPDATE packets to BGP peers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "no neighbor", "cmd": "no neighbor neighbor_ID\ndefault neighbor neighbor_ID", "desc": "The no neighbor command removes all neighbor configuration commands for the specified neighbor." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "peer-filter", "cmd": "peer-filter filter_name\nno peer-filter filter_name\ndefault peer-filter filter_name", "desc": "The peer-filter command creates a peer filter group and places the switch in peer-filter configuration mode for that group." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "rd (Router-BGP VRF and VNI Configuration Modes)", "cmd": "rd admin_ID:local_assignment\nno rd\ndefault rd", "desc": "The rd command adds a Route Distinguisher (RD) to VRF and VNI configuration modes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "rib fib fec ecmp ordered", "cmd": "rib fib fec ecmp ordered\nno rib fib fec ecmp ordered", "desc": "The rib fib fec ecmp ordered command is configured to enforce ordering of next hops as determined by the protocol agents in the FEC programmed for the route." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "route-target auto l3-vrf", "cmd": "route-target [import | export] auto l3-vrf 2b_ASN disabled", "desc": "The route-target auto l3-vrf command in Router BGP Address Family Configuration Mode autogenerates import and export route targets for Layer 3 Virtual Routing and Forwarding (VRF) instances." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "router bgp", "cmd": "router bgp as_id\nno router bgp\ndefault router bgp", "desc": "The router bgp command places the switch in router-BGP configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "router-id (BGP)", "cmd": "router-id id_num\nno router-id [id_num]\ndefault router-id [id_num]", "desc": "The router-id command sets the local router BGP router ID." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "set large-community", "cmd": "set large-community [large-community-list LIST1 [[LIST2] [additive | delete]]]\nno set large-community [large-community-list LIST1 [[LIST2] [additive | delete]]]\ndefault set large-community [large-community-list LIST1 [[LIST2] [additive | delete]]]", "desc": "Large communities are an optional transitive attribute of variable length." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show bgp labeled-unicast tunnel", "cmd": "show bgp labeled-unicast tunnel tunnel_index", "desc": "The show bgp labeled-unicast tunnel command displays the contents of the BGP LabeledUnicast (LU) tunnel table." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show bgp convergence", "cmd": "show bgp convergence [VRF_INSTANCE]", "desc": "The show bgp convergence command displays information about the Border Gateway Protocol (BGP) convergence state and other statistics about the BGP instance in the specified VRF or in all VRFs." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show bgp flow-spec", "cmd": "show bgp flow-spec [ipv4 | ipv6] [summary | detail] [vrf VRFNAME]", "desc": "The show bgp flow-spec ipv4 displays a brief description of each flowspec rule, including the matching rule and actions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "labels [ 101 102 103 104 ] from 1.1.1.2 (1.1.1.2)", "cmd": "labels [ 101 102 103 104 ] from 1.1.1.2 (1.1.1.2)", "desc": "Origin IGP, metric 0, localpref 100, weight 0, valid, external, best Rx path id: 0x0" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 1.0.0.2 (0.0.1.1)", "cmd": "from 1.0.0.2 (0.0.1.1)", "desc": "Origin INCOMPLETE, metric 0, localpref 100, weight 0, valid, external, not installed (labeled-route present) • This command displays the BGP routing-table entry for the 10." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 10.1.0.100 (10.0.0.100)", "cmd": "from 10.1.0.100 (10.0.0.100)", "desc": "Origin IGP, metric 0, localpref 100, IGP metric 1, weight 0, received 01:57:33 ago, valid, external, best Community: 655:23590 64496:1000 Rx SAFI: Unicast • This command displays the label stack associated with the route for a default VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "from 10.2.0.101 (12.0.0.101)", "cmd": "from 10.2.0.101 (12.0.0.101)", "desc": "Origin IGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:00:58 ago, valid, external, best Rx SAFI: Unicast 64496" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "peer-group INTERNAL:", "cmd": "peer-group INTERNAL:", "desc": "1.0.0.2" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip bgp community", "cmd": "show ip bgp community COMM_1 [COMM_2... COMM_n][MATCH_TYPE][DATA_OPTION]", "desc": "The show ip bgp community command displays Border Gateway Protocol (BGP) routing table entries, filtered by community." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip bgp neighbors (route type)", "cmd": "show ip bgp neighbors neighbor_addr HOPDIRECT [FILTER] [VRF_INSTANCE]\nshow ip bgp neighbors neighbor_addr [ROUTE_TYPE] HOPDIRECT [detail]", "desc": "The show ip bgp neighbors (route type) command displays information for next-hop routes to a specified IPv4 neighbor." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip bgp neighbors (route-type) community", "cmd": "show ip bgp neighbors addr RTE community CM_1 [CM_2...CM_n][MATCH][INFO][VRF_INST]", "desc": "The show ip bgp neighbors (route type) community command displays information for nexthop routes to a specified neighbor." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip bgp neighbors regexp", "cmd": "show ip bgp neighbors addr RTE regexp as_paths [VRF_INST]", "desc": "The show ip bgp neighbors regexp command displays information for next-hop routes to a specified IPv4 neighbor that match the AS path attributes specified in the given regular expression." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip bgp summary", "cmd": "show ip bgp summary [VRF_INSTANCE]", "desc": "The show ip bgp summary command displays the summary of all IPv4 and IPv6 BGP neighbors based on exchanged Address Family Identifiers (AFI) and Subsequent Address Family Identifiers (SAFI) negotiations where AFI is “IP” and SAFI is “unicast” information." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip bgp neighbors", "cmd": "show ip bgp neighbors [NEIGHBOR_ADDR] [VRF_INSTANCE]", "desc": "The show ip bgp neighbors command displays Border Gateway Protocol (BGP) and TCP-session data for a specified IPv4 BGP neighbor, or for all IPv4 BGP neighbors if an address is not specified." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip bgp paths", "cmd": "show ip bgp paths [VRF_INSTANCE]", "desc": "The show ip bgp paths command displays all BGP AS paths in the database." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip bgp peer-group", "cmd": "show ip bgp peer-group [GROUP][VRF_INSTANCE]", "desc": "The show ip bgp peer-group command displays the BGP version, address family, and group members for all BGP peer groups defined on the switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip bgp regexp", "cmd": "show ip bgp regexp as_paths [VRF_INSTANCE]", "desc": "The show ip bgp regexp command displays Border Gateway Protocol (BGP) IPv4 routing-table entries that match the AS path attributes specified in the given regular expression." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip community-list", "cmd": "show ip community-list [COMMUNITY_LIST]", "desc": "The show ip community-list command displays the BGP community lists configured on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip extcommunity-list", "cmd": "show ip extcommunity-list [COMMUNITY_LIST]", "desc": "The show ip extcommunity-list command displays the BGP extended community lists configured on the switch." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ipv6 bgp", "cmd": "show ipv6 bgp [FILTER][VRF_INSTANCE]", "desc": "The show ipv6 bgp command displays IPv6 Border Gateway Protocol (BGP) routing-table entries." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ipv6 bgp match community", "cmd": "show ipv6 bgp match community [COMM_1 ... COMM_n][MATCH_TYPE][INFO][VRF_INSTANCE]", "desc": "The show ipv6 bgp match community command displays IPv6 Border Gateway Protocol (BGP) routing-table entries, filtered by community." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ipv6 bgp peers", "cmd": "show ipv6 bgp peers [NEIGHBOR_ADDR] [VRF_INSTANCE]", "desc": "The show ipv6 bgp peers command displays IPv6 Border Gateway Protocol (BGP) and TCP session data for a specified neighbor." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ipv6 bgp peers (route type)", "cmd": "show ipv6 bgp peers neighbor_addr HOPDIRECT [FILTER] [VRF_INSTANCE]\nshow ipv6 bgp peers neighbor_addr [ROUTE_TYPE] HOPDIRECT [detail]", "desc": "The show ipv6 bgp peers (route type) command displays information about the routes either advertised to or received from a specified IPv6 BGP neighbor." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ipv6 bgp peers (route type) community", "cmd": "show ipv6 bgp peers addr RTE community CM_1 [CM_2...CM_n] [MATCH] [INFO] [VRF_INST]", "desc": "The show ipv6 bgp peers (route type) community command displays information about the routes either advertised to or received from a specified IPv6 BGP neighbor." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ipv6 bgp peers regexp", "cmd": "show ipv6 bgp peers addr ROUTE regexp as_paths [VRF_INST]", "desc": "The show ipv6 bgp peers regexp command displays information about routes (advertised or received) from a specified IPv6 neighbor that match the AS-path attributes specified in the given regular expression." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ipv6 bgp regexp", "cmd": "show ipv6 bgp regexp as_paths [VRF_INSTANCE]", "desc": "The show ipv6 bgp regexp command displays Border Gateway Protocol (BGP) IPv6 routing-table entries that match the AS-path attributes specified in the given regular expression." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ipv6 bgp summary", "cmd": "show ipv6 bgp summary [VRF_INSTANCE]", "desc": "The show ipv6 bgp summary command displays the summary of all IPv4 and IPv6 BGP neighbors based on Address Family Identifier (AFI) and Subsequent Address Family Identifier (SAFI) negotiations where AFI is “IPv6” and SAFI is “Unicast” information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show peer-filter", "cmd": "show peer-filter filter_name", "desc": "The show peer-filter command displays the definition of a peer filter." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show run|section bgp", "cmd": "show run | section bgp [name]", "desc": "When using the show run command, it displays the entire running configuration." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show tunnel rib brief", "cmd": "show bgp tunnel rib brief", "desc": "The show tunnel rib brief command displays the preferred tunnels for various IP endpoints, optionally filtered by endpoint." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "timers bgp", "cmd": "timers bgp keep_alive hold_time\nno timers bgp\ndefault timers bgp", "desc": "The timers bgp command configures the BGP keepalive and hold times." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "update-source", "cmd": "update-source interface", "desc": "The update-source command specifies a local source interface for the BGP monitoring session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "update wait-for-convergence", "cmd": "update wait-for-convergence\nno update wait-for-convergence\ndefault update wait-for-convergence", "desc": "The update wait-for-convergence command disables FIB updates and route advertisement when the BGP instance is initiated until the BGP convergence state is reached." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "update wait-install", "cmd": "update wait-install", "desc": "The update wait-install command causes BGP to defer the advertisement of routes until the routes have been programmed in hardware." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Default Profiles", "cmd": "Default Profiles", "desc": "Default profiles are the built-in policies that are applied to groups interface/BGP and unit." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "BGP Maintenance Route Map", "cmd": "BGP Maintenance Route Map", "desc": "Route-maps are used within a BGP maintenance profile to tag the inbound and outbound routes to direct traffic away from the unit." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "bgp", "cmd": "bgp [[ipv4 | ipv6] ip_addr] [vrf vrf_name] quiesce\nbgp ipv4_addr [vrf vrf_name]\nbgp ipv4_addr [vrf vrf_name]\nno bgp [ipv4_addr | ipv6_addr | peer_group_name][vrf vrf_name]\ndefault bgp [ipv4_addr | ipv6_addr | peer_group_name][vrf vrf_name]", "desc": "The bgp command places the switch in Maintenance Dynamic BGP Configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "group bgp", "cmd": "group bgp group_name\nno group bgp group_name\ndefault group bgp group_name", "desc": "The group bgp command places the switch in group-BGP configuration mode for configuring the members of a BGP group in a particular VRF and associating a BGP maintenance profile for these members." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "group interface", "cmd": "group interface group_name\nno group interface group_name\ndefault group interface group_name", "desc": "The group interface command places the switch in group-intf configuration mode for configuring the members of interface group and associating a BGP/interface maintenance profile for these members." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "initiator route-map inout", "cmd": "initiator route-map route-map-name inout\nno initiator route-map\ndefault initiator route-map", "desc": "The initiator route-map inout command is a maintenance BGP profile configuration option for assigning the initiator route-map, which will be applied to inout (inbound and outbound)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "interface", "cmd": "interface interface-name\nno interface interface-name\ndefault interface interface-name", "desc": "The interface command adds interfaces to interface group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "maintenance", "cmd": "maintenance\nno maintenance\ndefault maintenance", "desc": "The maintenance command allows you to enter maintenance configuration mode and specify maintenance configuration options." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "maintenance profile bgp", "cmd": "maintenance profile bgp profile-name\nno maintenance profile bgp profile-name\ndefault maintenance profile bgp profile-name", "desc": "The maintenance profile bgp command associates a BGP maintenance profile to an interface/BGP group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "maintenance profile interface", "cmd": "maintenance profile interface profile-name\nno maintenance profile interface profile-name\ndefault maintenance profile interface profile-name", "desc": "The maintenance profile interface command associates interface profile to interface group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "neighbor", "cmd": "neighbor [ipv4_addr | ipv6_addr | peer group name]\nno neighbor [ipv4_addr | ipv6_addr | peer group name]\ndefault neighbor [ipv4_addr | ipv6_addr | peer group name]", "desc": "The neighbor command adds BGP peer(s) to a BGP group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "on-boot duration", "cmd": "on-boot duration duration\nno on-boot\ndefault on-boot", "desc": "The on-boot duration command is a maintenance unit profile configuration option for specifying the duration after which the associated unit will be brought out of maintenance after reboot." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "profile bgp", "cmd": "profile bgp profile-name\nno profile bgp profile-name\ndefault profile bgp profile-name", "desc": "The profile bgp command places the switch in maintenance profile BGP configuration mode for configuring initiator route-map." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "profile bgp default", "cmd": "profile bgp profile_name default\nno profile bgp profile_name default\ndefault profile bgp profile_name default", "desc": "The profile bgp default command configures a user-configured BGP profile as default BGP profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "profile interface", "cmd": "profile interface profile-name\nno profile interface profile-name\ndefault profile interface profile-name", "desc": "The profile interface command places the switch in maintenance profile interface configuration mode for configuring rate-monitoring threshold, load-interval, and shutdown max-delay." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "profile interface default", "cmd": "profile interface profile_name default\nno profile interface profile_name default\ndefault profile interface profile_name default", "desc": "The profile interface default command configures a user-configured interface profile as default interface profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "profile unit", "cmd": "profile unit profile-name\nno profile unit profile-name\ndefault profile unit profile-name", "desc": "The profile unit command places the switch in maintenance profile unit configuration mode for configuring on-boot duration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "profile unit default", "cmd": "profile unit profile_name default\nno profile unit profile_name default\ndefault profile unit profile_name default", "desc": "The profile unit default command configures a user-configured unit profile as default unit profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "quiesce", "cmd": "quiesce\nno quiesce\ndefault quiesce", "desc": "The quiesce command places a unit or dynamic interface/BGP unit into maintenance mode, gracefully transitioning traffic away from it." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "rate-monitoring load-interval", "cmd": "rate-monitoring load-interval load_interval\nno rate-monitoring load-interval load_interval\ndefault rate-monitoring load-interval load_interval", "desc": "The rate-monitoring load-interval command is a maintenance interface profile configuration option for configuring the interfaces rate monitoring load interval with a load interval value between 5 and 600" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "rate-monitoring threshold", "cmd": "rate-monitoring threshold threshold_in_kbps\nno rate-monitoring threshold threshold_in_kbps\ndefault rate-monitoring threshold threshold_in_kbps", "desc": "The rate-monitoring threshold command is a maintenance interface profile configuration option for configuring the interfaces rate monitoring threshold with a threshold value between 1 and 4294967295 kilobytes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interface", "cmd": "show interface intf_name", "desc": "The show interface command displays detailed information about the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interface status", "cmd": "show interface [intf_name] status", "desc": "The show interface status command displays an m flag if the interface is undergoing maintenance operation." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip | ipv6 bgp", "cmd": "show ip bgp neighbors peer_addr [vrf vrf_name]\nshow ipv6 bgp peers peer_addr [vrf vrf_name]", "desc": "The show ip | ipv6 bgp command displays maintenance related information when relevant." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip | ipv6 bgp summary [ vrf ]", "cmd": "show ip bgp summary [vrf vrf_name]\nshow ipv6 bgp summary [vrf vrf_name]", "desc": "The show ip | ipv6 bgp summary [ vrf ] command displays the m flag if the BGP IPv4 or IPv6 peer is undergoing maintenance operation." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show maintenance", "cmd": "show maintenance", "desc": "The show maintenance command provides brief information about all units/dynamic interface unit/ dynamic bgp unit and status." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show maintenance bgp", "cmd": "show maintenance bgp ipv4_addr [vrf vrf_name] | ipv6_addr [vrf vrf_name] | peer_group [vrf vrf_name] |\nip all [vrf vrf_name | vrf all] | ipv6 all [vrf vrf_name | vrf all]", "desc": "The show maintenance bgp command displays detailed maintenance information about BGP peers." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show maintenance bgp receiver route-map", "cmd": "show maintenance bgp receiver route-map", "desc": "The show maintenance bgp receiver route-map command displays receiver route-map which is applied during maintenance operation." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show maintenance interface status quiesced", "cmd": "show maintenance interface status quiesced", "desc": "This example of the show maintenance interface status quisced command displays maintenance mode interface status details for quiesced interfaces." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show maintenance debug", "cmd": "show maintenance debug bgp [peer_name] | interface [intf_name] | units [unit_name]", "desc": "The show maintenance debug command displays the history of various maintenance operations on a unit/interface/BGP peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "maintEnter stages started", "cmd": "maintEnter stages started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "stage begin started", "cmd": "stage begin started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "event begin:EventMgr started", "cmd": "event begin:EventMgr started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "event begin:EventMgr completed", "cmd": "event begin:EventMgr completed", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "stage begin is complete", "cmd": "stage begin is complete", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "stage before_bgp started", "cmd": "stage before_bgp started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "event before_bgp:EventMgr started", "cmd": "event before_bgp:EventMgr started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "event before_bgp:EventMgr completed", "cmd": "event before_bgp:EventMgr completed", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "stage before_bgp is complete", "cmd": "stage before_bgp is complete", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "stage bgp started", "cmd": "stage bgp started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "event bgp:Rib started", "cmd": "event bgp:Rib started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "event bgp:Rib completed", "cmd": "event bgp:Rib completed", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "stage bgp is complete", "cmd": "stage bgp is complete", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "stage after_bgp started", "cmd": "stage after_bgp started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "event after_bgp:EventMgr started", "cmd": "event after_bgp:EventMgr started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "event after_bgp:EventMgr completed", "cmd": "event after_bgp:EventMgr completed", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "stage after_bgp is complete", "cmd": "stage after_bgp is complete", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "stage before_ratemon started", "cmd": "stage before_ratemon started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "event before_ratemon:EventMgr started", "cmd": "event before_ratemon:EventMgr started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "event before_ratemon:EventMgr completed", "cmd": "event before_ratemon:EventMgr completed", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "stage before_ratemon is complete", "cmd": "stage before_ratemon is complete", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "stage ratemon started", "cmd": "stage ratemon started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "event ratemon:MaintenanceMode started", "cmd": "event ratemon:MaintenanceMode started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "event ratemon:MaintenanceMode completed", "cmd": "event ratemon:MaintenanceMode completed", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "stage ratemon is complete", "cmd": "stage ratemon is complete", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "stage after_ratemon started", "cmd": "stage after_ratemon started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "event after_ratemon:EventMgr started", "cmd": "event after_ratemon:EventMgr started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "event after_ratemon:EventMgr completed", "cmd": "event after_ratemon:EventMgr completed", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "stage after_ratemon is complete", "cmd": "stage after_ratemon is complete", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "stage end started", "cmd": "stage end started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "event end:EventMgr started", "cmd": "event end:EventMgr started", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "event end:EventMgr completed", "cmd": "event end:EventMgr completed", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "stage end is complete", "cmd": "stage end is complete", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "maintEnter stages complete", "cmd": "maintEnter stages complete", "desc": "4 100 292 296 0 0 04:47:44 Estab 1 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show maintenance groups", "cmd": "show maintenance groups interface | bgp group_name", "desc": "The show maintenance groups command displays all the interface/BGP groups along with their members and associated profiles." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show maintenance interface", "cmd": "show maintenance interface [intf_name [detail] | detail]", "desc": "The show maintenance interface command displays detailed information about interfaces and their maintenance status with traffic rates." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show maintenance interface status", "cmd": "show maintenance interface status [active | entering | exiting | quiesced]", "desc": "The show maintenance interface status command displays maintenance status and rates for interfaces." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show maintenance profiles", "cmd": "show maintenance profiles interface | bgp | unit profile_name", "desc": "The show maintenance profiles command displays all the interface/BGP/unit profiles configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show maintenance stages", "cmd": "show maintenance stages [enter | exit]", "desc": "The show maintenance stages command displays stages of maintenance operation while entering/ exiting maintenance." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show maintenance summary", "cmd": "show maintenance summary", "desc": "The show maintenance summary command displays summarized information about the maintenance mode operations such as number of units configured, number of units Entering/Exiting maintenance etc." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show maintenance units", "cmd": "show maintenance units [unit_name]", "desc": "The show maintenance units command displays detailed information about the particular unit." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "shutdown max-delay", "cmd": "shutdown max-delay delay\nno shutdown max-delay delay\ndefault shutdown max-delay delay", "desc": "The shutdown max-delay command is a maintenance interface profile configuration option for configuring the maximum duration after which the interface is shutdown with a value between 1 and 4294967295 seconds." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "trigger on-maintenance", "cmd": "trigger on-maintenance [enter | exit][unit unit_name | bgp [ipv4_addr | ipv6_addr | peer_group][vrf\nvrf_name] | [interface intf_name] [begin | end | all] |[before | after][stage stage_name]", "desc": "The trigger on-maintenance command is an event handler configuration for triggering actions during the maintenance operation of a unit, interface and BGP peer at specified stages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "unit", "cmd": "unit linecard [l_range | 0 l_range | unit_name]\nno unit linecard [l_range | 0 l_range | unit_name]\ndefault unit linecard [l_range | 0 l_range | unit_name]", "desc": "The unit command places the switch in maintenance unit configuration mode for configuring BGP/interface groups in the unit." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "vrf", "cmd": "vrf vrf_name\nno vrf vrf_name\ndefault vrf vrf_name", "desc": "The vrf command specifies the VRF for BGP group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "BFD Modes", "cmd": "BFD Modes", "desc": "BFD functions in asynchronous or demand mode, and also offers an echo function." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "BFD on Port Channels", "cmd": "BFD on Port Channels", "desc": "On port channels, the BFD per-link feature can be used to add resiliency to the port channel's BFD sessions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "BFD Configuration", "cmd": "BFD Configuration", "desc": "To use BFD as the failure detection mechanism for a routing protocol, it must be enabled for each participating protocol." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "OSPF", "title": "Configure BFD for IS-IS", "cmd": "router isis 1", "desc": "The isis bfd and command configure Bidirectional Forwarding Detection (BFD), a low overhead protocol designed to provide rapid detection of failures at any protocol layer in the path between adjacent forwarding" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "Hardware Accelerated BFD Transmit", "cmd": "Hardware Accelerated BFD Transmit", "desc": "Hardware Accelerated BFD Transmit adds support for offloading BFD Transmit path to hardware (ASIC) for specific types of BFD sessions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show bfd peers", "cmd": "show bfd peers [INFO_LEVEL]", "desc": "The show bfd peers command displays information about the neighbors with which the switch currently has a Bidirectional Forwarding Detection (BFD) session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show bfd peers detail", "cmd": "show bfd peers detail", "desc": "Use the show bfd peers detail to display whether an individual session is hardware accelerated or not." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "session stats snapshot interval (BFD)", "cmd": "session stats snapshot interval timer_interval dangerous\nno session stats snapshot interval\ndefault session stats snapshot interval", "desc": "The session stats snapshot interval enables the BFD session telemetry on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "sbfd hold down", "cmd": "sbfd hold down seconds seconds", "desc": "The sbfd hold down command configures S-BFD Hold-down Timers on an SR-TE path." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "HA", "title": "vrrp bfd ip", "cmd": "vrrp group bfd ip ipv4_address\nno vrrp group bfd ip\ndefault vrrp group bfd ip", "desc": "The vrrp bfd ip command enables and configures Bidirectional Forwarding Detection (BFD) for Virtual Router Redundancy Protocol (VRRP) on the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "System", "title": "Router Control Functions Commands", "cmd": "Router Control Functions Commands", "desc": "Router General Configuration Mode • control-functions Router Control Functions Commands • code • code unit • commit • compile • discard • edit • pull • push Show Commands • show active • show diff • show pending" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "code", "cmd": "code", "desc": "The code command allows you to add RCF code directly to the switch through the CLI." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "code unit", "cmd": "code unit unit_name", "desc": "The code unit command allows the organization of RCF code into named code units." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "compile", "cmd": "compile", "desc": "The compile command compiles all modified code units from the pending buffer and unmodified code units from the running configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "control-functions", "cmd": "control-functions", "desc": "The control-functions command enters the Router Control Functions Configuration Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "discard", "cmd": "discard [unit unit_name | all", "desc": "The discard command discards the contents of the pending buffer for the specified code unit, or all code units if specified." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "help attribute", "cmd": "help attribute attribute_name", "desc": "The help attribute command in the Router General Control Functions Configuration Mode displays information about a specified attribute in an RCF function." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "help function", "cmd": "help function function_name", "desc": "The help function command in the Router General Control Functions Configuration Mode displays information about a specified built-in function." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "pull", "cmd": "pull arg", "desc": "The pull command allows the population of the pending buffer for the specified code unit with the contents of the file located at the specified URL." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "push", "cmd": "push arg", "desc": "The push command pushes the content of the specified code unit from the pending buffer to the location identified by the URL." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show active", "cmd": "show active [all]", "desc": "The show active command in the Router General Control Functions Configuration Mode displays the configured RCF Functions on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show diff", "cmd": "show diff", "desc": "The show diff command in the Router General Control Functions Configuration Mode displays the difference between the RCF code units in the pending buffer and the RCF code units in the running configuration." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "System", "title": "show router rcf code unit", "cmd": "show router rcf code unit unit_name", "desc": "The show router rcf code unit unit_name command in the Router General Control Functions Configuration Mode displays the committed RCF code units in the running-config." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "System", "title": "show router rcf function location", "cmd": "show router rcf function location [function function_name][unitunit_name]", "desc": "The show router rcf function location function function_name unitunit_name command in the Router General Control Functions Configuration Mode displays the code unit name and starting line number within the code unit for committed RCF function definitions." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "EVPN Address Family", "cmd": "router bgp 64500", "desc": "Inbound BGP Neighbor Application Table 134: Inbound BGP Neighbor Application Syntax address-family evpn neighbor ( NEIGHBOR | PEER_GROUP ) rcf in FUNCTION_NAME()" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "router kernel vrf ABC", "cmd": "router kernel vrf ABC", "desc": "address-family ipv4 software forwarding hardware offload route rcf OFFLOAD_POLICY() Displaying VrfLeak Agent Status Use the show vrf leak rcf function_name to display the status of the RCF VrfLeak agent on" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "Hardware Dependent Forwarding and Fast Drop", "cmd": "Hardware Dependent Forwarding and Fast Drop", "desc": "In IP multicast protocols, each (S,G) and (*,G) route corresponds to an inbound Reverse Path Forwarding (RPF) interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "Static Groups and Multicast Router", "cmd": "mld snooping", "desc": "To configure static groups, refer to the following commands:" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "Static IP Mroute", "cmd": "ip mroute 1.1.1.1/32 ethernet 2/1 20", "desc": "The Static IP Multicast route (or Static Mroute) interface overrides the interface that is ordinarily selected from the matching route in the unicast routing table, providing a means for breaking dependency on the unicast" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "Static Multicast", "cmd": "Static Multicast", "desc": "Static Multicast configures multicast routes statically on Arista switches and per VRF granularity." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "switch>", "cmd": "show ip mroute 225.1.1.1", "desc": "The show ip mroute command displays information from the IP multicast routing table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "activity polling-interval", "cmd": "activity polling-interval period\nno activity polling-interval\ndefault activity polling-interval", "desc": "The switch records activity levels for multicast routes in the mfib after polling the corresponding hardware activity bits." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "clear ip mfib fastdrop", "cmd": "clear ip mfib fastdrop", "desc": "The clear ip mfib fastdrop command removes all fast-drop entries from the MFIB table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "clear ip mroute", "cmd": "clear ip mroute ENTRY_LIST", "desc": "The clear ip mroute command removes route entries from the mroute table, as follows: • clear ip mroute * removes all entries from the mroute table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "clear ip multicast counters", "cmd": "clear ip multicast [vrf [vrf-name]] counters group_addr source_addr", "desc": "To clear per multicast route ingress counters or clear counters for a particular multicast route, use the clear ip multicast counters command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "hardware counter feature multicast ipv4", "cmd": "hardware counter feature multicast ipv4\nno hardware counter feature multicast ipv4\ndefault hardware counter feature multicast ipv4", "desc": "Use the hardware counter feature multicast ipv4 command to enable per multicast router ingress packets and byte counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip mfib fastdrop", "cmd": "ip mfib fastdrop\nno ip mfib fastdrop\ndefault ip mfib fastdrop", "desc": "In IP multicast protocols, every (S,G) or (*,G) route is associated with an inbound Reverse Path Forwarding (RPF) interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip mfib max-fastdrops", "cmd": "ip mfib max-fastdrops quantity\nno ip mfib max-fastdrops\ndefault ip mfib max-fastdrops", "desc": "The ip mfib max-fastdrops command limits the number of fast-drop routes that the switchs MFIB table can contain." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip mroute", "cmd": "ip mroute [source-prefix | source-address mask] [rpf-interface | rpf-neighbor] [admin distance]", "desc": "The ip mroute command configures the Static Mroute on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip multicast boundary", "cmd": "ip multicast boundary SUBNET [TCAM]\nno ip multicast boundary [SUBNET]\ndefault ip multicast boundary [SUBNET]", "desc": "The ip multicast boundary command specifies subnets where source traffic entering the configuration mode interface is dropped, preventing the creation of mroute states on the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip multicast static", "cmd": "ip multicast static", "desc": "The ip multicast static command enables static multicast routing on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mld last-listener-query-count", "cmd": "mld last-listener-query-count number\nno mld last-listener-query-count\ndefault mld last-listener-query-count", "desc": "The mld last-listener-query-count command specifies the number of query messages the switch sends in response to a group-specific or group-source-specific leave message." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mld last-listener-query-interval", "cmd": "mld last-listener-query-interval period\nno mld last-listener-query-interval\ndefault mld last-listener-query-interval", "desc": "The mld last-listener-query-interval command configures the switchs transmission interval for sending group-specific or group-source-specific query messages from the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mld query-interval", "cmd": "mld query-interval period\nno mld query-interval\ndefault mld query-interval", "desc": "The mld query-interval command configures the frequency at which the configuration mode interface, as an MLD querier, sends host-query messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mld robustness", "cmd": "mld robustness robust_value\nno mld robustness\ndefault mld robustness", "desc": "The mld robustness command configures the number of general queries to be sent before the router assumes there are no more listeners." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mld startup-query-count", "cmd": "mld startup-query-count number\nno mld startup-query-count\ndefault mld startup-query-count", "desc": "The mld startup-query-count command specifies the number of query messages that an interface sends during the startup query interval." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mld startup-query-interval", "cmd": "mld startup-query-interval period\nno mld startup-query-interval\ndefault mld startup-query-interval", "desc": "The mld startup-query-interval command specifies the interval between the general queries sent by a querier on startup." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mld static-group", "cmd": "mld static-group source_address [group_address | access-list acl_name]\nno mld static-group source_address [group_address | access-list acl_name]\ndefault mld static-group source_address [group_address | access-list acl_name]", "desc": "The mld static-group command configures the configuration mode interface as a static member of a specified multicast group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mld", "cmd": "mld [last-listener-query-count | last-listener-query-interval | query-interval | query-response-interval |\nrobustness | startup-query-count | startup-query-interval | static-group]\nno mld\ndefault mld", "desc": "The mld command enables multicast listener discovery on an interface which controls the flow of layer 3 IPv6 multicast traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "multipath deterministic", "cmd": "multipath deterministic\nno multipath deterministic\ndefault multipath deterministic", "desc": "By default, EOS load balances multicast traffic by distributing packets over all ECMP links." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "multipath none", "cmd": "multipath none\nno multipath none\ndefault multipath none", "desc": "By default, multicast traffic is load balanced by distributing packets over all ECMP links." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "route", "cmd": "route group_address [source_address] iif interface [oif interface] [cpu] [iifFrr interface] [priority priority_num]\nno route group_address\ndefault route group_address", "desc": "The route command configures a static multicast route for the specified source, destination group, and incoming interface on the router." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "router multicast", "cmd": "router multicast", "desc": "The router multicast command places the switch in router-multicast configuration mode to configure IPv4 and IPv6 router multicast traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "routing", "cmd": "routing\nno routing\ndefault routing", "desc": "The routing command allows the switch to forward multicast packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "rpf route", "cmd": "rpf route {source_prefix | source_address | mask}{rpf_interface | rpf_neighbor>} [admin_distance]\nno rpf route {source_prefix | source_address | mask}{rpf_interface | rpf_neighbor}\ndefault rpf route {source_prefix | source_address mask}{rpf_interface | rpf_neighbor}", "desc": "The rpf route command specifies a candidate for the multicast Reverse Path Forwarding (RPF) interface of any (S,G) multicast route (mroute), where the source falls within the given network prefix." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip mfib counters", "cmd": "show ip mfib vrf [vrf-name] group_addr source_addr counters", "desc": "Use the show ip mfib counters command to display per multicast route ingress packet and byte counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip mroute", "cmd": "show ip mroute\nshow ip mroute gp_addr", "desc": "The show ip mroute command displays information from the IP multicast routing table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show ip mroute count", "cmd": "show ip mroute count", "desc": "The show ip mroute count command displays IP multicast routing table statistics." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip multicast boundary", "cmd": "show ip multicast boundary [group_prefix | group_prefix/length [out] | interface {ethernet e_num |\nloopback l_num | management m_num | port-channel p_num | vlan v_num} | out]", "desc": "The show ip multicast boundary command displays the summary of all IP multicast boundaries across all interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mld membership", "cmd": "show mld membership [dynamic | group | interface | static]", "desc": "The show mld membership command displays MLD group and source membership information on a specific interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mld querier", "cmd": "show mld querier [interface | parameters]", "desc": "The show mld querier command displays information about the MLD querier and querier parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show mld snooping", "cmd": "show mld snooping", "desc": "Use the show mld snooping command to display the snooping status of the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mld statistics", "cmd": "show mld statistics version value", "desc": "The show mld statistics command displays total statistics information of incoming and outgoing MLD messages on a specific interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mld summary", "cmd": "show mld summary", "desc": "The show mld summary command displays MLD summary information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show multicast fib ipv4 software", "cmd": "show multicast fib ipv4 software [INFO_LEVEL] [ROUTE]", "desc": "The show multicast fib ipv4 software command displays information about the interfaces and the software-forwarded routes included in the IPv4 multicast forwarding information base (MFIB)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show multicast fib ipv4", "cmd": "software | sparse-mode | static | summary | vrf]", "desc": "The show multicast fib ipv4 command displays information about interfaces and the hardwareforwarded routes included in the IPv4 Multicast Forwarding Information Base (MFIB)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show multicast fib ipv6", "cmd": "show multicast fib ipv6", "desc": "The show multicast fib ipv6 command displays the Multicast Forwarding Information Base (MFIB) table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show pim ipv6 sparse-mode route", "cmd": "show pim ipv6 sparse-mode route", "desc": "The show pim ipv6 sparse-mode route command displays the PIM Sparse Mode Multicast Routing table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "unresolved cache-entries max", "cmd": "unresolved cache-entries max quantity_entries\nno unresolved cache-entries max\ndefault unresolved cache-entries max", "desc": "The unresolved cache-entries max command configures the maximum number of unresolved (S,G) routes that the switch can cache packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "unresolved packet-buffers max", "cmd": "unresolved packet-buffers max quantity_packets\nno unresolved packet-buffers max\ndefault unresolved packet-buffers max", "desc": "The unresolved packet-buffers max command specifies the number of (S,G) multicast packets for an individual route that the switch can process before the (S,G) entry is entered into cache." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "IGMP and IGMP Snooping", "cmd": "IGMP and IGMP Snooping", "desc": "• IGMP Snooping • IGMP Host Proxy Description • Supported Features • IGMP Protocols • Configuring IGMP • Configuring IGMP Snooping • IGMP Host Proxy • IGMP and IGMP Snooping Commands" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "IGMP Snooping", "cmd": "IGMP Snooping", "desc": "Internet Group Management Protocol (IGMP) snooping is a Layer 2 switch process that extracts lists of hosts receiving multicast group traffic by monitoring IGMP network packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "IGMP Host Proxy Description", "cmd": "IGMP Host Proxy Description", "desc": "The figure displays a typical IGMP host-proxy implementation." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "IGMP Protocols", "cmd": "IGMP Protocols", "desc": "• IGMP • IGMP Snooping" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "IGMP Snooping L2 Report Flooding", "cmd": "ip igmp snooping report-flooding", "desc": "L2 report flooding is an IGMP snooping feature that forwards membership report messages to specified ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "IGMP Snooping Filters", "cmd": "ip igmp profile list_1", "desc": "IGMP snooping filters assign IGMP profiles only to Layer 2 interfaces, and for Layer 3 interfaces use multicast boundary filters to control the multicast groups that the interfaces can join." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "v2", "cmd": "v2", "desc": "Po1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "v2", "cmd": "show igmp snooping querier counters", "desc": "Cpu 2028 172." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "IGMP Host Proxy", "cmd": "IGMP Host Proxy", "desc": "Interfaces on the switch can be configured to serve as IGMP host proxies." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "IGMP Host Proxy Configuration", "cmd": "interface ethernet 17", "desc": "Enabling IGMP Host Proxy Enable PIM MBR on the interface using the pim ipv4 border-router command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "or Later", "cmd": "or Later", "desc": "ASU switch N/A Set the Interface Restart Query to 5000: switch(config)# ip igmp snooping interface-restartquery 5000 Action - Configure on ASU switch just prior to initiating ASU." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "and Later", "cmd": "and Later", "desc": "No losses within a one second window." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "IGMP and IGMP Snooping Commands", "cmd": "IGMP and IGMP Snooping Commands", "desc": "IGMP Configuration Commands (Interface Configuration Mode) • igmp query-max-response-time • ip igmp last-member-query-count • ip igmp last-member-query-interval • ip igmp query-interval • ip igmp router-alert" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "clear ip igmp group", "cmd": "clear ip igmp group [ gp_addr][ interface INT_ID]", "desc": "The clear ip igmp group command deletes IGMP cache entries as follows: • clear ip igmp group all entries from the IGMP cache." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "clear ip igmp snooping counters", "cmd": "clear ip igmp snooping counters [INT_NAME]", "desc": "The clear ip igmp snooping counters command resets the snooping message counters for the specified interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "clear ip igmp statistics", "cmd": "clear ip igmp statistics [INTF_ID]", "desc": "The clear ip igmp statistics command resets IGMP transmission statistic counters for the specified interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "igmp query-max-response-time", "cmd": "igmp query-max-response-time period\nno igmp query-max-response-time\ndefault igmp query-max-response-time", "desc": "The igmp query-max-response-time command configures the query-max-response-time variable for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp", "cmd": "ip igmp\nno ip igmp", "desc": "The ip igmp command enables IGMP on a routed interface or on SVI (VLAN interface) without enabling PIM." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp host-proxy", "cmd": "ip igmp host-proxy [GROUP_ADDRESS [SOURCE_ADDRESS]]|[access-list acl]\nno ip igmp host-proxy [GROUP_ADDRESS [SOURCE_ADDRESS]]\ndefault ip igmp host-proxy [GROUP_ADDRESS [SOURCE_ADDRESS]]", "desc": "The ip igmp host-proxy command enables the IGMP host proxy service on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp host-proxy report-interval", "cmd": "ip igmp host-proxy report-interval period\nno ip igmp host-proxy report-interval\ndefault ip igmp host-proxy report-interval", "desc": "The ip igmp host-proxy report-interval command configures the period between unsolicited join reports that the switch sends as an IGMP host proxy from the configuration mode interface to a sender network after a (S,G) or (*,G) entry arrives in the multicast route (mroute) table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp host-proxy version", "cmd": "ip igmp host-proxy version version_number\nno ip igmp host-proxy version\ndefault ip igmp host-proxy version", "desc": "The ip igmp host-proxy version command configures the version number to be used in unsolicited reports when the interface is serving as an IGMP host proxy." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp last-member-query-count", "cmd": "ip igmp last-member-query-count number\nno ip igmp last-member-query-count\ndefault ip igmp last-member-query-count", "desc": "The ip igmp last-member-query-count command specifies the number of query messages the switch sends in response to a group-specific or group-source-specific leave message." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp last-member-query-interval", "cmd": "ip igmp last-member-query-interval period\nno ip igmp last-member-query-interval\ndefault ip igmp last-member-query-interval", "desc": "The ip igmp last-member-query-interval command configures the switch's transmission interval for sending group-specific or group-source-specific query messages from the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp profile", "cmd": "ip igmp profile profile_name\nno ip igmp profile profile_name\ndefault igmp profile profile_name", "desc": "The ip igmp profile command places the switch in the IGMP-profile configuration mode to configure an IGMP profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp query-interval", "cmd": "ip igmp query-interval period\nno ip igmp query-interval\ndefault ip igmp query-interval", "desc": "The ip igmp query-interval command configures the frequency at which the configuration mode interface, as an IGMP querier, sends host-query messages." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp router-alert", "cmd": "ip igmp router-alert DISPOSITION\nno ip igmp router-alert\ndefault ip igmp router-alert", "desc": "The ip igmp router-alert command configures the switch disposition of inbound IGMP packets to the configuration mode interface based on the presence of the router-alert option in the IP header." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping", "cmd": "ip igmp snooping\nno ip igmp snooping\ndefault ip igmp snooping", "desc": "The ip igmp snooping command enables snooping globally." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping filter", "cmd": "ip igmp snooping filter profile_name\nno ip igmp snooping filter [profile_name]\ndefault ip igmp snooping filter [profile_name]", "desc": "The ip igmp snooping filter command applies the specified IGMP snooping profile to the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping interface-restart-query", "cmd": "ip igmp snooping interface-restart-query query_time\nno ip igmp snooping interface-restart-query\ndefault ip igmp snooping interface-restart-query", "desc": "The ip igmp snooping interface-restart-query command configures the interface startup initial query time used for IGMP query spoofing." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping proxy", "cmd": "ip igmp snooping proxy\nno ip igmp snooping proxy\ndefault ip igmp snooping proxy", "desc": "The ip igmp snooping proxy command enables snooping proxy globally." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping querier", "cmd": "ip igmp snooping querier\nno ip igmp snooping querier\ndefault ip igmp snooping querier", "desc": "The ip igmp snooping querier command enables the snooping querier globally, which controls the querier for VLANs that are not configured with a snooping querier command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping querier address", "cmd": "ip igmp snooping querier address ipv4_address\nno ip igmp snooping querier address\ndefault ip igmp snooping querier address", "desc": "The ip igmp snooping querier address command sets the global querier source IP address, which specifies the source address for packets transmitted from VLANs for which a querier address (ip igmp snooping vlan querier address) is not configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping querier last-member-query-count", "cmd": "ip igmp snooping querier last-member-query-count number\nno ip igmp snooping querier last-member-query-count\ndefault ip igmp snooping querier last-member-query-count", "desc": "The ip igmp snooping querier last-member-query-count command configures the global igmp snooping querier last member query count (LMQC) value." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping querier last-member-query-interval", "cmd": "ip igmp snooping querier last-member-query-interval period\nno ip igmp snooping querier last-member-query-interval\ndefault ip igmp snooping querier last-member-query-interval", "desc": "The ip igmp snooping querier last-member-query-interval command sets the global IGMP snooping last member query interval." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping querier max-response-time", "cmd": "ip igmp snooping querier max-response-time resp_sec\nno ip igmp snooping querier max-response-time\ndefault ip igmp snooping querier max-response-time", "desc": "The ip igmp snooping querier max-response-time command specifies the global maxresponse-time value." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping querier query-interval", "cmd": "ip igmp snooping querier query-interval query_sec\nno ip igmp snooping querier query-interval\ndefault ip igmp snooping querier query-interval", "desc": "The ip igmp snooping querier query-interval command sets the global query interval." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping querier startup-query-count", "cmd": "ip igmp snooping querier startup-query-count number\nno ip igmp snooping querier startup-query-count\ndefault ip igmp snooping querier startup-query-count", "desc": "The ip igmp snooping querier startup-query-count command configures the global startup query count value." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping querier startup-query-interval", "cmd": "ip igmp snooping querier startup-query-interval period\nno ip igmp snooping querier startup-query-count\ndefault ip igmp snooping querier startup-query-count", "desc": "The ip igmp snooping querier startup-query-interval command configures the global startup query interval value." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping querier version", "cmd": "ip igmp snooping querier version version_number\nno ip igmp snooping querier startup-query-count\ndefault ip igmp snooping querier startup-query-count", "desc": "The ip igmp snooping querier version command configures the Internet Group Management Protocol (IGMP) snooping querier version on the configuration mode interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping report-flooding switch-port", "cmd": "ip igmp snooping report-flooding switch-port INTERFACE\nno ip igmp snooping report-flooding switch-port INTERFACE\ndefault ip igmp snooping report-flooding switch-port INTERFACE", "desc": "The ip igmp snooping report-flooding switch-port command specifies Ethernet ports or port channels that can forward IGMP membership report messages for all VLANs where L2 report flooding is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping restart query-interval", "cmd": "ip igmp snooping restart query-interval query_sec\nno ip igmp snooping restart query-interval\ndefault ip igmp snooping restart query-interval", "desc": "The ip igmp snooping restart query-interval command sets the query interval for all VLANs during an IGMP snooping restart." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping robustness-variable", "cmd": "ip igmp snooping robustness-variable robust_value\nno ip igmp snooping robustness-variable\ndefault ip igmp snooping robustness-variable", "desc": "The ip igmp snooping robustness-variable command configures the robustness variable for snooping packets sent from any VLAN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan", "cmd": "ip igmp snooping vlan v_range\nno ip igmp snooping vlan v_range\ndefault ip igmp snooping vlan v_range", "desc": "The ip igmp snooping vlan command enables snooping on the specified VLANs if snooping is globally enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan fast-leave", "cmd": "ip igmp snooping vlan v_range fast-leave\nno ip igmp snooping vlan v_range fast-leave\ndefault ip igmp snooping vlan v_range fast-leave", "desc": "The ip igmp snooping vlan fast-leave command enables fast-leave processing on specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan max-groups", "cmd": "ip igmp snooping vlan v_range max-groups quantity\nno ip igmp snooping vlan v_range max-groups\ndefault ip igmp snooping vlan v_rangemax-groups", "desc": "The ip igmp snooping vlan max-groups command configures the quantity of multicast groups that the specified VLAN forwarding table can contain." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan member", "cmd": "ip igmp snooping vlan v_num member ipv4_addr interface STATIC_INT\nno ip igmp snooping vlan v_num member ipv4_addr interface STATIC_INT\ndefault ip igmp snooping vlan v_num member ipv4_addr interface STATIC_INT", "desc": "The ip igmp snooping vlan member command adds ports as static members to a multicast group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan multicast-router", "cmd": "ip igmp snooping vlan v_range multicast-router interface STATIC_INT\nno ip igmp snooping vlan v_range multicast-router interface STATIC_INT\ndefault ip igmp snooping vlan v_range multicast-router interface STATIC_INT", "desc": "The ip igmp snooping vlan multicast-router command adds a multicast router as a static port to the specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan proxy", "cmd": "ip igmp snooping vlan [ID | range]proxy\nno ip igmp snooping vlan [ID | range] proxy\ndefault ip igmp snooping vlan [ID | range] proxy", "desc": "The ip igmp snooping vlan proxy command enables snooping proxy on individual VLAN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan querier", "cmd": "ip igmp snooping vlan v_range querier\nno ip igmp snooping vlan v_range querier\ndefault ip igmp snooping vlan v_range querier", "desc": "The ip igmp snooping vlan querier command controls the querier for the specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan querier address", "cmd": "ip igmp snooping vlan v_range querier address ipv4_address\nno ip igmp snooping vlan v_range querier address\ndefault ip igmp snooping vlan v_range querier address", "desc": "The ip igmp snooping vlan querier address command sets the source address for query packets sent from specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan querier last-member-query-count", "cmd": "ip igmp snooping vlan v_range querier last-member-query-count number\nno ip igmp snooping vlan v_range querier address\ndefault ip igmp snooping vlan v_range querier address", "desc": "The ip igmp snooping vlan querier last-member-query-count command specifies an IGMP snooping querier last-member-query-count (LMQC) value for the specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan querier last-member-query-interval", "cmd": "ip igmp snooping vlan v_range querier last-member-query-interval period\nno ip igmp snooping vlan v_range querier last-member-query-interval\ndefault ip igmp snooping vlan v_range querier last-member-query-interval", "desc": "The ip igmp snooping vlan querier last-member-query-interval command configures last-member-query-interval for packets sent from the specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan querier max-response-time", "cmd": "ip igmp snooping vlan v_range querier max-response-time resp_sec\nno ip igmp snooping vlan v_range querier max-response-time\ndefault ip igmp snooping vlan v_range querier max-response-time", "desc": "The ip igmp snooping vlan querier max-response-time command configures max-responsetime for packets sent from the specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan querier query-interval", "cmd": "ip igmp snooping vlan v_range querier query-interval query_sec\nno ip igmp snooping vlan v_range querier query-interval\ndefault ip igmp snooping vlan v_range querier query-interval", "desc": "The ip igmp snooping vlan querier query-interval command sets the query interval for the specified VLAN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan querier startup-query-count", "cmd": "ip igmp snooping vlan v_range querier startup-query-count number\nno ip igmp snooping vlan v_range querier startup-query-count\ndefault ip igmp snooping vlan v_range querier startup-query-count", "desc": "The ip igmp snooping vlan querier startup-query-count command specifies the startup query count value for the specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan querier startup-query-interval", "cmd": "ip igmp snooping vlan v_range querier startup-query-interval period\nno ip igmp snooping vlan v_range querier startup-query-interval\ndefault ip igmp snooping vlan v_range querier startup-query-interval", "desc": "The ip igmp snooping vlan querier startup-query-interval command specifies the startup query interval value for the specified VLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan querier version", "cmd": "ip igmp snooping vlan v_range querier version version_number\nno ip igmp snooping vlan v_range querier version\ndefault ip igmp snooping vlan v_range querier version", "desc": "The ip igmp snooping vlan querier version command configures the Internet Group Management Protocol (IGMP) snooping querier function on the VLAN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan report-flooding", "cmd": "ip igmp snooping vlan v_range report-flooding\nno ip igmp snooping vlan v_range report-flooding\ndefault ip igmp snooping vlan v_range report-flooding", "desc": "The ip igmp snooping vlan report-flooding command enables L2 report flooding on the specified VLANs if report flooding is globally enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp snooping vlan report-flooding switch-port", "cmd": "ip igmp snooping vlan v_range report-flooding switch-port INTERFACE\nno ip igmp snooping vlan v_range report-flooding switch-port INTERFACE\ndefault ip igmp snooping vlan v_rangereport-flooding switch-port INTERFACE", "desc": "The ip igmp snooping vlan report-flooding switch-port command configures Ethernet ports or port channels to forward IGMP membership report messages for a specified VLAN range where L2 report flooding is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp startup-query-count", "cmd": "ip igmp startup-query-count number\nno ip igmp startup-query-count\ndefault ip igmp startup-query-count", "desc": "The ip igmp startup-query-count command specifies the number of query messages that an interface sends during the startup interval defined by ip igmp startup-query-interval." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp startup-query-interval", "cmd": "ip igmp startup-query-interval period\nno ip igmp startup-query-interval\ndefault ip igmp startup-query-interval", "desc": "The ip igmp startup-query-interval command specifies the configuration mode interface IGMP startup period, during which query messages are sent at an accelerated rate." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp static-group", "cmd": "ip igmp static-group group_address [SOURCE_ADDRESS]\nno ip igmp static-group group_address [SOURCE_ADDRESS]\ndefault ip igmp static-group group_address [SOURCE_ADDRESS]", "desc": "The ip igmp static-group command configures the configuration mode interface as a static member of a specified multicast group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp static-group acl", "cmd": "ip igmp static-group acl list_name\nno ip igmp static-group acl\ndefault ip igmp static-group acl", "desc": "The ip igmp static-group acl command configures the configuration mode interface as a static member of the multicast groups specified by an IP Access Control List (ACL)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp static-group range", "cmd": "ip igmp static-group range GROUP_ADDR[SOURCE_ADDR]\nno ip igmp static-group range GROUP_ADDR[SOURCE_ADDR]\ndefault ip igmp static-group range GROUP_ADDR[SOURCE_ADDR]", "desc": "The ip igmp static-group range command configures the configuration mode interface as a static member of multicast groups specified by an address range." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip igmp version", "cmd": "ip igmp version version_number\nno ip igmp version\ndefault ip igmp version", "desc": "The ip igmp version command configures the Internet Group Management Protocol (IGMP) version on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "permit / deny", "cmd": "permit\ndeny", "desc": "The permit command configures the configuration mode IGMP profile as a permit list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "range", "cmd": "range init_address [UPPER_RANGE]\nno range init_address [UPPER_RANGE]\ndefault range init_address [UPPER_RANGE]", "desc": "The range command specifies an address range for the configuration mode IGMP profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show igmp snooping querier", "cmd": "show igmp snooping querier [STATUS][VLAN_ID][DATA]", "desc": "The show igmp snooping querier command displays snooping querier configuration and status information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show igmp snooping querier counters", "cmd": "show igmp snooping querier counters [VLAN_ID]", "desc": "The show igmp snooping querier counters command displays the counters from the querier, as learned through Internet Group Management Protocol (IGMP)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show igmp snooping querier membership", "cmd": "show igmp snooping querier membership [VLAN_ID [GROUP_LIST]]", "desc": "The show igmp snooping querier membership command displays the membership from the querier, as learned through Internet Group Management Protocol (IGMP)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp groups", "cmd": "show ip igmp groups GROUP_LIST [DATA]", "desc": "The show ip igmp groups command displays multicast groups that have receivers directly connected to the switch, as learned through Internet Group Management Protocol (IGMP)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp groups count", "cmd": "show ip igmp groups [GROUP_LIST] count", "desc": "The show ip igmp groups count command displays the number of multicast groups that are joined across the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp host-proxy config-sanity", "cmd": "show ip igmp host-proxy config-sanity", "desc": "The show ip igmp host-proxy config-sanity command displays diagnostic information about an IGMP host proxy configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp host-proxy interface", "cmd": "show ip igmp host-proxy interface [interface] [detail]", "desc": "The show ip igmp host-proxy interface command displays per-interface IGMP host-proxy configuration information, including the IGMP groups joined on the interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp interface", "cmd": "show ip igmp interface [INT_NAME]", "desc": "The show ip igmp interface command displays multicast information about the specified interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp profile", "cmd": "show ip igmp profile [PROFILES]", "desc": "The show ip igmp profile command displays the contents of the specified IGMP profile." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp snooping", "cmd": "show ip igmp snooping [VLAN_ID]", "desc": "The show ip igmp snooping command displays the switch IGMP snooping configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp snooping counters", "cmd": "show ip igmp snooping counters [DATA_TYPE][DATA_LEVEL]", "desc": "The show ip igmp snooping counters command displays the number of IGMP messages sent and received through each switch port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp snooping counters ethdev-pams", "cmd": "show ip igmp snooping counters ethdev-pams", "desc": "The show ip igmp snooping counters command displays the number of dropped IGMP packets messages sent and received through each switch port at the kernel level." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp snooping groups", "cmd": "show ip igmp snooping groups proxy [VLAN_ID][PORT_INT][GROUPS][DATA local]", "desc": "The show ip igmp snooping groups command displays IGMP snooping statistics." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp snooping groups count", "cmd": "show ip igmp snooping groups [VLAN_ID][PORT_INT] count [DATA]", "desc": "The show ip igmp snooping groups count command displays the number of multicast groups on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp snooping mrouter", "cmd": "show ip igmp snooping mrouter [VLAN_ID][DATA]", "desc": "The show ip igmp snooping mrouter command displays the status of dynamic and static multicast router ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp snooping report-flooding", "cmd": "show ip igmp snooping report-flooding [VLAN_ID][DATA]", "desc": "The show ip igmp snooping report-flooding command displays IGMP snooping L2 report flooding configuration and status information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp static-groups", "cmd": "show ip igmp static-groups [INFO_LEVEL][interface INT_NAME]", "desc": "The show ip igmp static-groups command displays information about all configured IGMP multicast static groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp static-groups acl", "cmd": "show ip igmp static-groups acl", "desc": "The show ip igmp static-groups acl command displays information about the IGMP multicast static groups that are configured by the specified Access Control List (ACL)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp static-groups group", "cmd": "show ip igmp static-groups group [GROUP_LIST]", "desc": "The show ip igmp static-groups group command displays information about all specified IGMP multicast static groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip igmp statistics", "cmd": "show ip igmp statistics [INTERFACE_ID]", "desc": "The show ip igmp statistics command displays IGMP transmission statistics for the specified interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "Protocol Independent Multicast", "cmd": "Protocol Independent Multicast", "desc": "Protocol Independent Multicast (PIM) distributes multicast data using routes gathered by other protocols." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "PIM Sparse Mode", "cmd": "PIM Sparse Mode", "desc": "In PIM-SM, each host (sender or receiver) is associated with a Designated Router (DR) that acts for all directly connected hosts in PIM-SM transactions, and trees are unidirectional." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "PIM Commands", "cmd": "PIM Commands", "desc": "PIM Configuration Commands (Global) • anycast-rp • candidate • fast-reroute • group-expiry-timer • holdtime • ip pim dr-notify-delay • log neighbors • register local-interface • router pim bidirectional" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "anycast-rp", "cmd": "anycast-rp rp_addr peer_addr [REGISTER]\nno anycast-rp rp_addr [peer_addr]\ndefault anycast-rp rp_addr [peer_addr]", "desc": "The anycast-rp command configures the switch as a member of an anycast-RP set and establishes a communication link with another member of the set." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "candidate", "cmd": "candidate INTERFACE [HASHMASK_LENGTH][INTERVAL_PERIOD][PRIORITY_NUM]\nno candidate [priority][interval]\ndefault candidate[priority][interval]", "desc": "The candidate command configures the switch as a Candidate BSR router (C-BSR)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "fast-reroute", "cmd": "fast-reroute acl_name\nno fast-reroute acl_name\ndefault fast-reroute acl_name", "desc": "The fast-reroute command enables Multicast only Fast Re-Route (MoFRR) to minimize traffic loss in a network when a link or node failure occurs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "group-expiry-timer", "cmd": "group-expiry-timer value\nno group-expiry-timer value\ndefault group-expiry-timer value", "desc": "The group-expiry-timer command sets the group-expiry-timer in seconds after which a group with no activity gets deleted from the PIM Rendezvous Point (RP) tree." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "holdtime", "cmd": "holdtime period\nno holdtime\ndefault holdtime", "desc": "The holdtime command specifies the value the switch inserts in the holdtime parameter field in BootStrap Messages (BSM) that it sends." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip pim dr-notify-delay", "cmd": "ip pim dr-notify-delay notify_delay_time\nno ip pim dr-notify-delay\ndefault ip pim dr-notify-delay", "desc": "The ip pim dr-notify-delay command sets the designated router (DR) notification delay." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ipv4", "cmd": "ipv4", "desc": "The ipv4 command places the switch in the IPv4 submode for the PIM configuration mode in which it is entered." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "log neighbors", "cmd": "log neighbors\nno log neighbors\ndefault log neighbors", "desc": "The log neighbors command configures the switch to generate a log message when a neighbor entry is added or removed from the PIM Neighbor table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "pim bsr ipv4 border", "cmd": "pim bsr ipv4 border\nno pim bsr ipv4 border\ndefault pim bsr ipv4 border", "desc": "The pim bsr ipv4 border command prevents the switch from sending BootStrap router Messages (BSMs) over the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "pim ipv4 bidirectional", "cmd": "pim ipv4 bidirectional\nno pim ipv4\nno pim ipv4 bidirectional\ndefault pim ipv4\ndefault pim ipv4 bidirectional", "desc": "The pim ipv4 bidirectional command enables PIM bidirectional and IGMP (router mode) on the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "pim ipv4 border-router", "cmd": "pim ipv4 border-router\nno pim ipv4 border-router\ndefault pim ipv4 border-router", "desc": "The pim ipv4 border-router command configures the configuration mode interface as a PIM Multicast Border Router (MBR)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "pim ipv4 dr-priority", "cmd": "pim ipv4 dr-priority level\nno pim ipv4 dr-priority [level]\ndefault pim ipv4 dr-priority [level]", "desc": "PIM-SM uses these criteria for electing a Designated Router (DR): • If at least one router does not advertise a DR priority value, then PIM-SM elects the router with the highest IP address as the DR." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "pim ipv4 hello count", "cmd": "pim ipv4 hello count [multiple]\nno pim ipv4 hello count [multiple]", "desc": "The pim ipv4 hello count command sets the PIM hello count for the interface being configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "pim ipv4 hello interval", "cmd": "pim ipv4 hello interval period\nno pim ipv4 hello interval [period]\ndefault pim ipv4 hello interval [period]", "desc": "The pim ipv4 hello interval command specifies the transmission interval between PIM hello messages originating from the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "pim ipv4 join-prune count", "cmd": "pim ipv4 join-prune count count_value\nno pim ipv4 join-prune count count_value\ndefault pim ipv4 join-prune count count_value", "desc": "The pim ipv4 join-prune count command configures the number of times a join or prune messages can be missed before the upstream neighbor time expires." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "pim ipv4 join-prune interval", "cmd": "pim ipv4 join-prune interval [period]\nno pim ipv4 join-prune interval [period]\ndefault pim ipv4 join-prune interval [period]", "desc": "The pim ipv4 join-prune interval command specifies the period between join or prune messages that the configuration mode interface originates and sends to the upstream RPF neighbor." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "pim ipv4 neighbor-filter", "cmd": "pim ipv4 neighbor-filter access_list\nno pim ipv4 neighbor-filter\ndefault pim ipv4 neighbor-filter", "desc": "The pim ipv4 neighbor-filter command configures the configuration mode interface to filter PIM control packets on the basis of neighbor addresses listed in a specified standard access list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "pim ipv4 sparse-mode", "cmd": "pim ipv4 sparse-mode\nno pim ipv4\nno pim ipv4 sparse-mode\ndefault pim ipv4\ndefault pim ipv4 sparse-mode", "desc": "The pim ipv4 sparse-mode command enables PIM IPv4 Sparse Mode (PIM-SM) and IGMP (router mode) on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "register checksum", "cmd": "register checksum [full | header]", "desc": "The register checksum command in the Router PIM Sparse-Mode IPv6 Configuration Mode configures a checksum to use for PIM IPv6 register messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "register local-interface", "cmd": "register local-interface INT_NAME\nno register local-interface\ndefault register local-interface", "desc": "The register local-interface command programs the switch to fill the source field in all outbound PIM SM register packets with the IP address of a specified interface or the incoming interface of the group specified by the message." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "router pim bidirectional", "cmd": "router pim bidirectional", "desc": "The router pim bidirectional command places the switch in the router-pimbidirectional configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "router pim bsr", "cmd": "router pim bsr", "desc": "The router pim bsr command places the switch in the router-pim bsr configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "router pim sparse-mode", "cmd": "router pim sparse-mode", "desc": "The router pim sparse-mode command places the switch in the router-pim sparse-mode configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "rp address", "cmd": "rp address rp_addr [MULTICAST_SUBNET][HASHMASK_LENGTH][BSR_OVERRIDE]\nno rp address rp_addr [MULTICAST_SUBNET]\ndefault rp address rp_addr [MULTICAST_SUBNET]", "desc": "The rp address command configures the address of a Protocol Independent Multicast (PIM) static Rendezvous Point (RP) for a specified multicast subnet." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "rp allow", "cmd": "rp allow\nno rp allow\ndefault rp allow", "desc": "The rp allow command accepts and allows PIM (*,G) join message with an RP address that is different from the configured RPs for that particular (*,G)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "rp candidate", "cmd": "any order.\nrp candidate INTERFACE [GROUP_ADDR][PRIORITY_NUM][INTERVAL_PERIOD]\nno rp candidate [INTERFACE][GROUP_ADDR]\nno rp candidate [INTERFACE] interval\nno rp candidate [INTERFACE] priority\ndefault rp candidate [INTERFACE][GROUP_ADDR]\ndefault rp candidate [INTERFACE] interval\ndefault rp candidate [INTERFACE] priority", "desc": "The rp candidate command configures the switch as a Candidate Rendezvous Point (C-RP)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "rp hash algorithm modulo", "cmd": "rp hash algorithm modulo\nno rp hash algorithm modulo\ndefault rp hash algorithm modulo", "desc": "The rp hash algorithm modulo command configures the load-balancing scheme across available Rendezvous Points (RP)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "rp-candidate advertisement-filter", "cmd": "rp-candidate advertisement-filter access-list access-list_name\nno rp-candidate advertisement-filter access-list access-list_name\ndefault rp-candidate advertisement-filter access-list access-list_name", "desc": "The rp-candidate advertisement-filter command filters the RP candidate advertisements from certain IP addresses." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "sg-expiry-timer", "cmd": "sg-expiry-timer period\nno sg-expiry-timer\ndefault sg-expiry-timer", "desc": "The sg-expiry-timer command configures the (S, G) expiry timer interval for PIM-SM (S, G) multicast routes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip pim bsr", "cmd": "show ip pim bsr [GROUP_FILTER]", "desc": "The show ip pim bsr command displays the switchs BootStrap Router (BSR) information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip pim config-sanity", "cmd": "show ip pim config-sanity", "desc": "The show ip pim config-sanity command displays diagnostic information about the switch's PIM configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip pim interface", "cmd": "show ip pim interface [INT_NAME][INFO_LEVEL]", "desc": "The show ip pim interface command displays information about interfaces configured for PIM." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip pim neighbor", "cmd": "show ip pim neighbor [INT_NAME][BFD_DATA]", "desc": "The show ip pim neighbor command displays information about Protocol Independent Multicast (PIM) neighbors discovered by hello messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip pim protocol counters", "cmd": "show ip pim protocol counters [INT_NAME]", "desc": "The show ip pim protocol command displays statistics about Protocol Independent Multicast (PIM) control messages sent and received by the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip pim register-source", "cmd": "show ip pim register-source", "desc": "The show ip pim register-source command displays the name of the interface from where the switch derives the IP address that it uses to fill the source field in all outbound PIM SM register packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip pim rp", "cmd": "show ip pim rp", "desc": "The show ip pim rp command displays the status and multicast group of each cached Rendezvous Point (RP)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip pim rp-candidate", "cmd": "show ip pim rp-candidate", "desc": "The show ip pim rp-candidate command displays the Rendezvous Point (RP) that is used for a specified multicast group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip pim rp-hash", "cmd": "show ip pim rp-hash ipv4_addr [INFO_LEVEL]", "desc": "The show ip pim rp-hash displays the group to RP-hash mapping for the specified group and the list of qualifying candidate RPs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip pim upstream joins", "cmd": "show ip pim upstream joins [JOIN_ADDRESSES] [NEIGHBOR_FILTER]", "desc": "The show ip pim upstream joins command displays the join messages that the switch is scheduled to send." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "spt threshold", "cmd": "spt threshold {0 | infinity}[match list acl_name]\nno spt threshold {0 | infinity}[match list acl_name]\ndefault spt threshold{0 | infinity} [match list acl_name]", "desc": "The spt threshold command configures Shortest Path Tree (SPT) threshold actions for IPv4 multicast groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "ssm range", "cmd": "ssm range {acl_name | standard}\nno ssm range\ndefault ssm range", "desc": "The ssm range command defines the Source Specific Multicast (SSM) range of IP multicast addresses." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "MSDP Introduction", "cmd": "MSDP Introduction", "desc": "Arista switches support the following MSDP features: • Basic MSDP speaker functions • MSDP peer configuration - description, connect-source interface, keepalive time, and hold time." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "MSDP Description", "cmd": "MSDP Description", "desc": "The Multicast Source Discovery Protocol (MSDP) defines a topology connecting Protocol Independent Multicast sparse mode (PIM-SM) domains." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "MSDP Speakers", "cmd": "MSDP Speakers", "desc": "An MSDP speaker is a router in a PIM-SM domain that has MSDP peering sessions with MSDP peers in other domains." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "Network Configuration", "cmd": "Network Configuration", "desc": "The TCP connections between RPs are defined either through an underlying unicast routing table or by configuring a default MSDP peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "Default MSDP Peers", "cmd": "Default MSDP Peers", "desc": "The default peer is the MSDP peer from which the MSDP speaker accepts SA messages." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "MSDP Exchange Processes", "cmd": "MSDP Exchange Processes", "desc": "• Control Information Exchange • MSDP Data Exchange" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "MSDP Data Exchange", "cmd": "MSDP Data Exchange", "desc": "This sequence describes the exchange of multicast data across PIM domains through MSDP: 1." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "MSDP Configuration", "cmd": "MSDP Configuration", "desc": "These sections describe the configuration of the switch as an MSDP speaker and the establishment of MSDP peering sessions." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "MSDP Speaker Configuration", "cmd": "router msdp", "desc": "The switch is configured as an MSDP speaker when MSDP is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "originator-id local-interface", "cmd": "originator-id local-interface INTERFACE\nno originator-id local-interface INTERFACE\ndefault originator-id local-interface INTERFACE", "desc": "The originator-id local-interface command configures an originator ID to replace the Rendezvous Point (RP) address in Source-Address (SA) messages that it originates as an MSDP speaker." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "peer", "cmd": "peer ip_address", "desc": "The peer command configures the specified address as an MSDP peer, enables MSDP on the switch if it was not previously enabled, and places the switch in Router MSDP Peer Configuration Mode for the specified peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "sa-filter in", "cmd": "sa-filter in list list_name\nno sa-filter in\ndefault sa-filter in", "desc": "The sa-filter in command assigns an IP Access Control List (ACL) as a filter for inbound Source-Active (SA) messages from the configuration-mode MSDP peer connection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "sa-filter out", "cmd": "sa-filter out list list_name\nno sa-filter out\ndefault sa-filter out", "desc": "The sa-filter out command assigns an IP Access Control List (ACL) as a filter for outbound SourceActive (SA) messages to the configuration-mode MSDP peer connection, after which the permit statement allows matching SAs to be advertised outbound to the peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "sa-limit", "cmd": "sa-limit quantity\nno sa-limit\ndefault sa-limit", "desc": "The sa-limit command specifies the maximum number of Source-Active messages from a specified MSDP peer that the switch allows in the SA cache." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip msdp peer", "cmd": "show ip msdp peer [PEER_ADDR][SA_ACCEPT]", "desc": "The show ip msdp peer command displays information about specified MSDP peers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip msdp pim sa-cache", "cmd": "show ip msdp pim sa-cache", "desc": "The show ip msdp pim sa-cache command displays the SA cache for the local PIM domain configured on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip msdp sa-cache", "cmd": "show ip msdp sa-cache [ADDRESS_FILTER][CONTENTS]", "desc": "The show ip msdp sa-cache command displays contents of the Source-Active (SA) message cache." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip msdp sanity", "cmd": "show ip msdp sanity", "desc": "The show ip msdp sanity command performs a consistency check between the multicast routing table and the MSDP Source-Address (SA) caches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show ip msdp summary", "cmd": "show ip msdp summary", "desc": "The show ip msdp summary command displays a list of peer addresses, the operational status of the peer, and the number of Source-Active messages in the SA cache from that peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "Listen 0", "cmd": "Listen 0", "desc": "Up" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show msdp mesh-group", "cmd": "show msdp mesh-group", "desc": "The show msdp mesh-group command displays the mesh group membership of MSDP peers that are configured on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "MSDP Commands", "cmd": "MSDP Commands", "desc": "MSDP Configuration Commands (Global) • connection retry interval • forward register-packets (MSDP) • group-limit • ip msdp rejected-limit • originator-id local-interface • peer • router msdp MSDP Peer Configuration Commands" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "clear ip msdp sa-cache", "cmd": "clear ip msdp sa-cache [ADDRESS_FILTER]", "desc": "The clear ip msdp sa-cache command removes contents of the Source-Active (SA) message cache." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "connection retry interval", "cmd": "connection retry interval connect_retry\nno connection retry interval connect_retry\ndefault connection retry interval connect_retry", "desc": "The connection retry interval command specifies the period that the switch waits after an MSDP peering session is reset before trying to reestablish the session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "default-peer", "cmd": "default-peer [PREFIX]\nno default-peer\ndefault default-peer", "desc": "The default-peer command configures the specified MSDP peer connection as a default peer on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "description (MSDP)", "cmd": "description description_string\nno description\ndefault description", "desc": "The description command associates descriptive text with the configuration-mode MSDP peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "disabled (MSDP)", "cmd": "disabled\nno disabled\ndefault disabled", "desc": "The disabled command closes the peering session with the specified MSDP peer by terminating the TCP connection between the switch and the peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "forward register-packets (MSDP)", "cmd": "forward register-packets\nno forward register-packets\ndefault forward register-packets", "desc": "The forward register-packets command enables the encapsulation of multicast data packets on the sending MSDP peer and the decapsulation and forwarding on a receiving MSDP peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "group-limit", "cmd": "group-limit quantity sourcesrc_subnet\nno group-limit quantity source src_subnet\ndefault group-limit quantity source src_subnet", "desc": "The group-limit command specifies the maximum number of Source-Active (SA) messages that the switch allows in the SA cache for a specified multicast group address." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "ip msdp rejected-limit", "cmd": "ip msdp rejected-limit quantity\nno ip msdp rejected-limit\ndefault ip msdp rejected-limit", "desc": "The ip msdp rejected-limit command specifies the maximum number of rejected Source-Active messages that the switch allows in the SA cache." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "keepalive (MSDP)", "cmd": "keepalive keep_alive hold_time\nno keepalive\ndefault keepalive", "desc": "The keepalive command configures the MSDP keep-alive and hold time intervals for a specified MSDP peer connection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "local-interface", "cmd": "local-interface interface\nno local-interface\ndefault local-interface", "desc": "MSDP peering sessions are established over a TCP connection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mesh-group", "cmd": "mesh-group group_name\nno mesh-group group_name\ndefault mesh-group group_name", "desc": "The mesh-groupcommand configures the configuration-mode MSDP peer connection as an MSDP mesh group member." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show msdp rpf-peer", "cmd": "show msdp rpf-peer rp_addr", "desc": "The show msdp rpf-peer command displays MSDP information for the peer from which the switch accepts SA messages for a specified Rendezvous Point (RP)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "AVB Overview", "cmd": "AVB Overview", "desc": "Audio Video Bridging (AVB) is a protocol set that provides precision time synchronization, admission control, queuing reservation, and guaranteed bandwidth of professional grade quality audio and video across an" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "AVB Protocols", "cmd": "AVB Protocols", "desc": "This section describes supported AVB protocols: • gPTP • MVRP • MSRP • MRP" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "gPTP", "cmd": "gPTP", "desc": "Generalized Precision Time Protocol (gPTP) is a network time synchronization standard for bridged Local Area Networks based on the IEEE 1588v2 Precision Time Protocol and supports the AVB protocol standards." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "AVB Configuration", "cmd": "AVB Configuration", "desc": "This section describes the AVB configuration: • Enabling gPTP • Enabling MSRP • Displaying MSRP Configuration and Status • Enabling MVRP • Displaying MVRP Configuration and Status" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "AVB Commands", "cmd": "AVB Commands", "desc": "MSRP Commands • msrp • msrp streams load-file • show msrp • show msrp interfaces • show msrp streams MRP Commands • mrp leave-all-timer • mrp leave-timer MVRP Commands • show mvrp" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mrp leave-all-timer", "cmd": "mrp leave-all-timer period\nmrp leave-all-timer\ndefault mrp leave-all-timer\nno mrp leave-all-timer", "desc": "The mrp leave-all-timer command specifies the mrp leave all timer interval for the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "mrp leave-timer", "cmd": "mrp leave-timer period\nno mrp leave-timer\ndefault mrp leave-timer", "desc": "The leave-timer controls the de-registration of attributes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "msrp", "cmd": "msrp\nno msrp\ndefault msrp", "desc": "MSRP enables Multiple Stream Registration Protocol (MSRP), which is a signaling protocol that provides nodes with the ability to reserve network resources to ensure Quality of Service (QoS) between talker and" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "msrp streams load-file", "cmd": "msrp streams load-file", "desc": "The load-file for MSRP streams provides a file that contains an alias that can be substituted in the name (stream-id) of a string." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show msrp", "cmd": "show msrp [ INTERFACE_NAME]", "desc": "The show msrp command displays MSRP operational information for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show msrp interfaces", "cmd": "show msrp interfaces [INTERFACE_NAME] STATION_TYPE_NAME [STREAMS]", "desc": "The show msrp interfaces command displays station stream information for the specified station type, interfaces and streams." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show msrp streams", "cmd": "show msrp streams [STREAM_NAME] [INFO_LEVEL]", "desc": "The show msrp streams command displays configuration and status information on the specified MSRP streams." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show mvrp", "cmd": "show mvrp [INTERFACE_NAME]", "desc": "The show mvrp command displays MVRP operational information for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VXLAN Introduction", "cmd": "VXLAN Introduction", "desc": "Virtual Extensible LAN (VXLAN) is a networking technology that encapsulates MAC-based Layer 2 Ethernet frames within Layer 3 UDP packets to aggregate and tunnel multiple Layer 2 networks across a Layer 3" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VXLAN Description", "cmd": "VXLAN Description", "desc": "These sections describe VXLAN architecture, the data objects that comprise a VXLAN network, and process of bridging packets through a VXLAN network." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VXLAN Architecture", "cmd": "VXLAN Architecture", "desc": "The VXLAN architecture extends a Layer 2 network by connecting VLANs from multiple hosts through UDP tunnels called VXLAN segments." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "to 255.255.255.", "cmd": "to 255.255.255.", "desc": "The network in the figure above has the following assignments: • VTEP IP address of 10." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VXLAN Gateway", "cmd": "VXLAN Gateway", "desc": "A VXLAN gateway is a service that exchanges VXLAN data and packets with devices connected to different network segments." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VXLAN Processes", "cmd": "VXLAN Processes", "desc": "When a packet enters a VLAN from a member (ingress) port, the VLAN learns the source address by adding an entry to the MAC address table that associates the source to the ingress-port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "show vxlan vtep", "cmd": "show vxlan vtep detail summary type [ecmp | flood | multicast | unicast]", "desc": "The show vxlan vtep command displays information about remote VTEPs discovered by the configured VTI and exchanged packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "flood", "cmd": "flood", "desc": "Virtual Extensible LANs (VXLANs)" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "flood, ECMP", "cmd": "flood, ECMP", "desc": "Virtual Extensible LANs (VXLANs)" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "multicast", "cmd": "multicast", "desc": "Total number of remote VTEPS: 4 • Use the following command to display detailed information about the VTEPs exchanging data with the configured VTI: switch# show vxlan vtep detail Remote VTEPs for Vxlan1:" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "control plane control plane", "cmd": "control plane control plane", "desc": "flood" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "data plane", "cmd": "data plane", "desc": "datapath flood, ECMP" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "control plane datapath", "cmd": "control plane datapath", "desc": "multicast Total number of remote VTEPS: 4" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "vxlan flood vtep", "cmd": "vxlan [ ACCESS_VNI] flood vtep] MODIFY] VTEP_1 [VTEP_2]...[VTEP_N]\nno vxlan [ACCESS_VNI] flood vtep\ndefault vxlan [ACCESS_VNI] flood vtep", "desc": "The vxlan flood vtep command supports VXLAN head-end replication by creating or modifying a list that specifies remote VTEPs to which the switch bridges replicated traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "vxlan multicast-group decap", "cmd": "vxlan multicast-group decap group_addr\nno vxlan multicast-group decap\ndefault vxlan multicast-group decap", "desc": "The vxlan multicast-group decap command enables VXLAN multicast decapsulation." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "vxlan source-interface", "cmd": "vxlan source-interface INT_NAME\nno vxlan source-interface\ndefault vxlan source-interface", "desc": "The vxlan source-interface command specifies the interface from which the configuration mode VXLAN Interface (VTI) derives the source address (IP) that it uses when exchanging VXLAN frames." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "vxlan udp-port", "cmd": "vxlan udp-port port_id\nno vxlan udp-port\ndefault vxlan udp-port", "desc": "The vxlan udp-port command associates a UDP port with the configuration mode VXLAN Interface (VTI)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "vxlan vlan vni", "cmd": "vxlan vlan vlan_id vni [vni_id ]\nno vxlan vlan vlan_id vni [vni_id]\ndefault vxlan vlan vlan_id vni [vni_id]", "desc": "The vxlan vlan vni command associates a VLAN ID with a virtual network identifier (VNI)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "vxlan vni notation dotted", "cmd": "vxlan vni notation dotted\nno vxlan vni notation dotted\ndefault vxlan vni notation dotted", "desc": "The vxlan vni notation dotted command configures the switch to display VNIs in dotted decimal notation." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "VXLAN and MLAG", "cmd": "interface VXLAN1", "desc": "VXLAN over MLAG provides redundancy in hardware VTEPs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VXLAN Configuration", "cmd": "VXLAN Configuration", "desc": "These sections describe VXLAN configuration tasks: • Configuring the VTI • Head End Replication Configuration • VXLAN Routing Configuration • Configuring VXLAN Routing with Overlay VRFs • Configuring VXLAN over MLAG" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VXLAN Routing Configuration", "cmd": "VXLAN Routing Configuration", "desc": "• Implementing VXLAN Routing • Configuring Direct VXLAN Routing • Configuring VXLAN VTEP counters • VXLAN Auto Flood-List Construction" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VXLAN Auto Flood-List Construction", "cmd": "VXLAN Auto Flood-List Construction", "desc": "With the introduction of wireless Access Points (APs), VXLAN flood-lists learned from the data-plane is added to or removed from the flood-lists created in the control-plane." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "VXLAN Decapsulation for interface with multiple VRFs", "cmd": "VXLAN Decapsulation for interface with multiple VRFs", "desc": "Please refer to the following security advisory after the EOS software upgrade for a network that leverages VXLAN decapsulation on an interface that carries traffic for multiple VRFs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "VXLAN Rules Support for Mirror ACLs Configuration", "cmd": "ip access-list miracl", "desc": "VXLAN rules support for mirror ACLs configuration permit VXLAN deep inspection rules to be specified in the mirroring ACLs when the switch is operating in normal mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "Static EVPN VXLAN Configuration", "cmd": "Static EVPN VXLAN Configuration", "desc": "switch(config)# service routing protocols model multi-agent switch(config)# interface Loopback0 switch(config-if-Lo0)# ip address 172." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "VXLAN Bridging and Routing Configuration", "cmd": "VXLAN Bridging and Routing Configuration", "desc": "switch(config)# interface Loopback0 switch(config-if-Lo0)# ip address 172." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN VXLAN All Active Multi-homing", "cmd": "EVPN VXLAN All Active Multi-homing", "desc": "Activate Multi-homing in an EVPN environment by assigning an Ethernet segment identifier to the participating Ethernet or Port Channel interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN VXLAN Single-Active Multihoming", "cmd": "EVPN VXLAN Single-Active Multihoming", "desc": "Multi-homing allows in an EVPN environment by assigning an Ethernet segment identifier or a single Customer Edge (CE) to the participating multiple Provider Edge (PE)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "from 10.0.0.2 (0.0.1.1)", "cmd": "from 10.0.0.2 (0.0.1.1)", "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, external, best Extended Community: TunnelEncap:tunnelTypeVXLAN EvpnEsImportRt:00:01:00:01:00:01 DF Election: Preference 100 Limitations • Single-active multihoming with MPLS is not supported." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "DYNAMIC", "cmd": "DYNAMIC", "desc": "Et16 0050.568e.58e9 DYNAMIC Et23 0050.56a0.474a DYNAMIC Et16" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "DYNAMIC", "cmd": "show vxlan address-table", "desc": "Et5 Total Mac Addresses for this criterion: 8 Moves ----1 Last Move --------0:02:01 ago 0:08:53 ago 0:18:04 ago 12 days, 1:02:44 ago 12 days, 1:02:44 ago 12 days, 0:17:30 ago 12 days, 0:17:30 ago 12 days, 1:02:44 ago" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VXLAN Commands", "cmd": "VXLAN Commands", "desc": "VXLAN Global Configuration Commands • interface vxlan • ip address virtual • vxlan vni notation dotted VXLAN Interface Configuration Commands • igmp snooping • vxlan flood vtep • vxlan multicast-group decap" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "clear vxlan counters", "cmd": "clear vxlan counters ROUTE_TYPE", "desc": "The clear vxlan counters command resets the VXLAN counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "designated-forwarder election hold-time", "cmd": "designated-forwarder election hold-time sec\nno designated-forwarder election hold-time sec\ndefault designated-forwarder election hold-time sec", "desc": "The optional designated-forwarder election hold-time command can configure a wait time before selecting the designated forwarder and allow potential forwarders a chance to advertise their EVPN Ethernet segment (type 4) routes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "igmp snooping", "cmd": "igmp snooping\nno igmp snooping", "desc": "The igmp snooping command in the VXLAN Configuration Mode configures IGMP Snooping to be aware of VXLAN endpoints." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "interface vxlan", "cmd": "interface vxlan vx_range\nno interface vxlan vx_range\ndefault interface vxlan vx_range", "desc": "The interface vxlan command places the switch in vxlan-interface configuration mode for modifying the specified VXLAN Tunnel Interface (VTI)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "ip address virtual", "cmd": "ip address virtual [ipv4_subnet | secondary]\nno ip address virtual\ndefault ip address virtual", "desc": "The ip address virtual command configures a specified address as the primary IPv4 address and as a virtual IP address for the configuration mode VLAN interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "redistribute attached-host", "cmd": "redistribute attached-host route-map name\nno redistribute attached-host route-map name\ndefault redistribute attached-host route-map name", "desc": "Use the redistribute attached-host to redistribute the source routes in the MRIB via BGP while running multi-agent protocol model for the IPv4 multicast address-family." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show arp", "cmd": "total | vrf [word | all]]", "desc": "Use the show arp command to display and modify entries in the Address Resolution Protocol (ARP) cache." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show interfaces VXLAN", "cmd": "show interfaces VXLAN num", "desc": "Use the show interfaces VXLAN command to display the operational status and configuration information of the specified VXLAN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show service vxlan", "cmd": "show service vxlan [status | switch [SWITCH_TYPE] | vni [VNI_INFO]]", "desc": "The show service vxlan command displays the status of the VXLAN Control Service (VCS) and the received (from all connected VTEPs) and advertised (to all connected VTEPs) MAC address reachability information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vxlan address-table", "cmd": "show vxlan address-table [ENTRY_TYPE] [MAC_ADDR] [VLANS] [REMOTE_VTEP]", "desc": "The show vxlan address-table command displays the vxlan address table." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vxlan counters", "cmd": "show vxlan counters ROUTE_TYPE", "desc": "The show vxlan counters command displays the VXLAN counters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vxlan flood vtep", "cmd": "show vxlan flood vtep [VLANS]", "desc": "The show vxlan flood vtep command displays the flood list that the switch is using to perform headend replication." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN Overview", "cmd": "EVPN Overview", "desc": "Ethernet VPN (EVPN) is a standards-based BGP control plane to advertise MAC addresses, MAC and IP bindings and IP Prefixes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN Terminology", "cmd": "EVPN Terminology", "desc": "The EVPN standard, in the context of an NVO environment, defines the functionality for delivering multitenant Layer 2/3 VPN services using either VXLAN, NVGRE, or MPLS over GRE encapsulation across a common physical IP infrastructure." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN Service Models", "cmd": "EVPN Service Models", "desc": "An EVPN Instance (EVI), can contain, one or more Layer 2 broadcast domains (VLANs)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "VLAN Based Service Interface", "cmd": "VLAN Based Service Interface", "desc": "In the VLAN-based service there is a one-to-one mapping between the VLAN-ID and the MAC-VRF of the EVPN instance." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "VLAN Bundle Service Interface", "cmd": "VLAN Bundle Service Interface", "desc": "In the VLAN bundle service, there is a many-to-one mapping between the VLAN-IDs and the MAC-VRF of the EVPN instance." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "VLAN Aware Bundle Service Interface", "cmd": "VLAN Aware Bundle Service Interface", "desc": "In the VLAN aware bundle service, there is a many-to-one mapping between the VLAN-IDs and the MACVRF of the EVPN instance." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "EVPN MPLS LAYER 3 VPN (Type-5 Route)", "cmd": "EVPN MPLS LAYER 3 VPN (Type-5 Route)", "desc": "Ethernet VPN (EVPN) is an extension of the BGP protocol introducing a new address family: Layer 2 VPN (address family number 25) / EVPN (subsequent address family number 70)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN VXLAN IPv6 Overlay", "cmd": "EVPN VXLAN IPv6 Overlay", "desc": "Beginning with EOS Release 4." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "iBGP as PE-CE Protocol for BGP and EVPN L3 VPNs", "cmd": "iBGP as PE-CE Protocol for BGP and EVPN L3 VPNs", "desc": "EOS supports iBGP as the Provider Edge (PE) - Customer Edge (CE) as an extension to BGP EVPN Layer 3 (L3) VPNs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN Layer 3 Core Operations", "cmd": "EVPN Layer 3 Core Operations", "desc": "The EVPN standard defines a number of operations and functionality to allow the dynamic learning of MAC and IP bindings, management of MAC moves (VM/host mobility), ARP suppression, automated discovery of" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "ARP Suppression", "cmd": "ARP Suppression", "desc": "Address Resolution Protocol (ARP) suppression can be supported on the remote VTEPs, providing the option to advertise the MAC and IP binding in the type-2 route." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "IP VPN", "cmd": "IP VPN", "desc": "RFC 4364 allows Service Providers and Enterprises to use their backbone infrastructure to provide services to multiple customers, or internal departments, while performing the following functions: • Maintaining privacy." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "labels [ 200066 ] from 192.168.58.12 (2.2.2.222)", "cmd": "labels [ 200066 ] from 192.168.58.12 (2.2.2.222)", "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, external, ECMP head, best, ECMP contributor Local MPLS label: 200066, SR Label Index: 66 3 4 6" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "labels [ 200066 ] from 192.168.59.12 (3.3.3.200)", "cmd": "labels [ 200066 ] from 192.168.59.12 (3.3.3.200)", "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, external, ECMP, ECMP contributor Not best: ECMP-Fast configured Local MPLS label: 200066, SR Label Index: 66 Advertised to 2 peers:" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN Type-5 Routes: IP Prefix Advertisement", "cmd": "EVPN Type-5 Routes: IP Prefix Advertisement", "desc": "The EVPN type 2 routes can be used to advertise IP prefixes by making use of the optional IP address and IP address length fields in the route." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "BGP PIC Edge for EVPN VXLAN Routes for Remote VTEP Failures", "cmd": "BGP PIC Edge for EVPN VXLAN Routes for Remote VTEP Failures", "desc": "When a remote VTEP goes down, the IGP and BGP must recompute a new best path traffic destined to affected BGP prefixes originally reachable by the problematic VTEP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "VXLAN DSCP Mapping", "cmd": "VXLAN DSCP Mapping", "desc": "VXLAN DSCP Mapping allows the selection of Differentiated Services Code Point DSCP and Traffic Class TC values for packets at VTEPs ( VXLAN Tunnel Endpoint) along VXLAN encapsulation and decapsulation" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN E-Tree for MPLS and VXLAN", "cmd": "EVPN E-Tree for MPLS and VXLAN", "desc": "As part of an L2 EVPN service, E-Tree assigns the role of root or leaf to each attachment circuit (AC)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN IGP Cost for VTEP Reachability", "cmd": "EVPN IGP Cost for VTEP Reachability", "desc": "In EVPN deployment with VXLAN underlay when an EVPN type-5 prefix is imported into an IP VRF, the IGP cost of the underlay VTEP reachability is not considered as part of BGP best-path selection post import." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "from 10.0.1.1 (0.0.2.1)", "cmd": "from 10.0.1.1 (0.0.2.1)", "desc": "Origin INCOMPLETE, metric -, localpref 100, weight 0, valid, external, best Extended Community: Route-Target-AS:64500:20000 TunnelEncap:tunnelTypeVXLAN EvpnRouterMac:00:00:78:03:00:00 VNI: 20000 BGP routing table entry for ip-prefix 20." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "from 10.0.2.1 (0.0.3.1)", "cmd": "from 10.0.2.1 (0.0.3.1)", "desc": "Origin INCOMPLETE, metric -, localpref 100, weight 0, valid, external, best Extended Community: Route-Target-AS:64500:20000 TunnelEncap:tunnelTypeVXLAN EvpnRouterMac:00:00:78:04:00:00 VNI: 20000" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "from 10.0.2.1 (0.0.3.1), imported EVPN route, RD 11.0.2.1:0", "cmd": "from 10.0.2.1 (0.0.3.1), imported EVPN route, RD 11.0.2.1:0", "desc": "Origin INCOMPLETE, metric 0, localpref 100, IGP metric 350, weight 0, tag 0 Received 01:11:00 ago, valid, external, ECMP head, ECMP, best, ECMP contributor Extended Community: Route-Target-AS:64500:20000 TunnelEncap:tunnelTypeVXLAN" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "from 10.0.1.1 (0.0.2.1), imported EVPN route, RD 11.0.1.1:0", "cmd": "from 10.0.1.1 (0.0.2.1), imported EVPN route, RD 11.0.1.1:0", "desc": "Origin INCOMPLETE, metric 0, localpref 100, IGP metric 340, weight 0, tag 0 Received 01:11:00 ago, valid, external, ECMP, ECMP contributor Not best: ECMP-Fast configured Extended Community: Route-Target-AS:64500:20000 TunnelEncap:tunnelTypeVXLAN" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN VXLAN Single-Gateway Centralized Routing", "cmd": "EVPN VXLAN Single-Gateway Centralized Routing", "desc": "In a traditional EVPN VXLAN centralized anycast gateway deployment, multiple Layer 3 VXLAN Tunnel Endpoints (VTEPs) serve the role of the centralized anycast gateway." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN Multicast VRF Leaking", "cmd": "EVPN Multicast VRF Leaking", "desc": "Overview EVPN Multicast virtual routing and forwarding (VRF) Leaking forwards multicast traffic from a sender in a tenant or external domain (VRF) to a different domain (VRF) with connected receivers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "Static Inter-VRF Route", "cmd": "Static Inter-VRF Route", "desc": "The Static Inter-VRF Route feature adds support for static inter-VRF routes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "Show Commands", "cmd": "show ip route vrf vrf1", "desc": "Use the show ip route vrf to display the egress VRF name if it differs from the source VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "from 10.0.2.1 (0.0.1.1), imported EVPN route, RD 10.255.0.0:20", "cmd": "from 10.0.2.1 (0.0.1.1), imported EVPN route, RD 10.255.0.0:20", "desc": "Origin IGP, metric 0, localpref 100, IGP metric 0, weight 0, received 00:14:43 ago, valid, external, ECMP head, ECMP, best, ECMP contributor Extended Community: Route-Target-AS:64500:10020 Route-Target-AS:64500:20000" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "from 10.0.2.1 (0.0.1.1), imported EVPN route, RD 10.255.0.1:20", "cmd": "from 10.0.2.1 (0.0.1.1), imported EVPN route, RD 10.255.0.1:20", "desc": "Origin IGP, metric 0, localpref 100, IGP metric 0, weight 0, received 00:14:43 ago, valid, external, ECMP, ECMP contributor Extended Community: Route-Target-AS:64500:10020 Route-Target-AS:64500:20000 TunnelEncap:tunnelTypeVXLAN EvpnMacMobility:1 Evpn…" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "from 10.0.0.1 (0.0.1.1)", "cmd": "from 10.0.0.1 (0.0.1.1)", "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, internal, best Extended Community: Route-Target-AS:10:1 TunnelEncap:tunnelTypeVXLAN VNI: 10 PMSI Tunnel: PIM-SSM Tree, MPLS Label: 10, Leaf Information Required: false," }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "Flood Traffic Filtering with EVPN", "cmd": "Flood Traffic Filtering with EVPN", "desc": "The VXLAN fabric managed by EVPN does not always flood with broadcast, multicast, or unknown MAC traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "from 2.2.2.222 (2.2.2.222)", "cmd": "from 2.2.2.222 (2.2.2.222)", "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, internal, best Extended Community: Route-Target-AS:64512:11 TunnelEncap:tunnelTypeMpls MPLS label: 958810 BGP routing table entry for ip-prefix 100." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show e-tree vlan", "cmd": "show e-tree vlan", "desc": "The show e-tree vlan command displays configuration information about E-Tree on VLANs." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ip bgp vrf", "cmd": "show ip bgp vrf [vrf_name | all | default]", "desc": "The show ip bgp vrf command displays the type of VPN from the imported route." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "from 4.0.0.3 (52.0.0.1), imported EVPN route, RD 400:1", "cmd": "from 4.0.0.3 (52.0.0.1), imported EVPN route, RD 400:1", "desc": "Origin IGP, metric -, localpref 100, weight 0, valid, external,best Extended Community: Route-Target-AS:4000:1 TunnelEncap:tunnelTypeVXLAN EvpnRouterMac:74:83:ef:0b:70:f3 Leaked from VRF vrf-red" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "show ip route vrf", "cmd": "show ip route vrf [vrf_name | all]", "desc": "The show ip route vrf command displays leaked prefixes with the label L in the output that indicates that the IPv4 route has been leaked." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show ipv6 bgp vrf", "cmd": "show ipv6 bgp vrf [vrf_name | all | default]", "desc": "The show ipv6 bgp vrf command displays the type of VPN from the imported route." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Static", "title": "show ipv6 route vrf", "cmd": "show ipv6 route vrf [vrf_name | all]", "desc": "The show ipv6 route vrf command displays leaked prefixes with the label L in the output that indicates that the IPv6 route has been leaked." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show l2rib input all", "cmd": "show l2rib input all", "desc": "Use the show l2rib input all command to display the Layer 2 RIB input tables migration process." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show l2Rib input VXLAN-control-service", "cmd": "show l2Rib input VXLAN-control-service", "desc": "Use the show l2Rib input VXLAN-control-service to display the migration processes for the VXLAN control service." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show l2rib output", "cmd": "show l2rib output", "desc": "Use the show l2rib output command to display the the Layer 2 RIB utput tables migration process." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "show service VXLAN address-table", "cmd": "show service VXLAN address-table {advertised | received}[address H.H.H | evpn | hsc | mss |\nswitch [Word | all] | vni vnid | vtep A.B.C.D]", "desc": "The show service VXLAN address-table command displays route entries in the MAC forwarding table that are added through the CVX." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "EVPN MPLS Virtual Private Wire Service (VPWS)", "cmd": "interface ethernet 3/1", "desc": "Traffic to/from a given Attachment Circuit (AC) without any MAC lookup/learning can be forwarded using EVPN MPLS VPWS, which uses BGP for signalling." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN VXLAN IRB Sample Configuration", "cmd": "EVPN VXLAN IRB Sample Configuration", "desc": "In the following topology, we are connecting a Layer 2 site with a Layer 3 site using Layer 3 EVPN (type-5 route)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "MLAG Configuration: Leaf-11 and Leaf-12", "cmd": "MLAG Configuration: Leaf-11 and Leaf-12", "desc": "Leaf-11 MLAG Configuration switch(config)# spanning-tree mode mstp switch(config)# no spanning-tree vlan-id 4093-4094 !" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "MLAG Configuration: Leaf-21 and Leaf-22", "cmd": "MLAG Configuration: Leaf-21 and Leaf-22", "desc": "Leaf-21 MLAG Configuration switch(config)# spanning-tree mode mstp switch(config)# no spanning-tree vlan-id 4093-4094 !" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "VLAN and Distributed IP Address Configuration: Leaf-11 and Leaf-21", "cmd": "VLAN and Distributed IP Address Configuration: Leaf-11 and Leaf-21", "desc": "VLAN and interface configuration for VLAN 10 (virtual IP address 10." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "VXLAN Interface Configuration: Leaf-11 and Leaf-21", "cmd": "VXLAN Interface Configuration: Leaf-11 and Leaf-21", "desc": "The tenants’ VLANs are mapped to unique overlay VXLAN VNIs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "eBGP Underlay Configuration on the Leaf Switches", "cmd": "eBGP Underlay Configuration on the Leaf Switches", "desc": "The leaf switches for the underlay network peer with each spine on the physical interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN BGP Configuration on the Spine Switches", "cmd": "EVPN BGP Configuration on the Spine Switches", "desc": "The EVPN BGP configuration on two of the spine switches is summarized below." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "eBGP Overlay on Leaf Switches", "cmd": "eBGP Overlay on Leaf Switches", "desc": "The MAC VRFs and IP VRF for the tenants’ subnets are created in the BGP router context with unique RouteDistinguishers (RD) and Route-Targets (RT) attached to each MAC-VRF and IP-VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "eBGP Overlay on Spine Switches", "cmd": "eBGP Overlay on Spine Switches", "desc": "The EVPN BGP configuration on the spine switches is summarised in the following examples." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "EVPN MPLS Sample Configuration", "cmd": "EVPN MPLS Sample Configuration", "desc": "This section describes configuring and verifying BGP VPN, which has steps similar to the EVPN VXLAN demonstration." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "IP VPNs Sample Configuration", "cmd": "IP VPNs Sample Configuration", "desc": "Here, we examine BGP EVPN layer 3 VPN over an LDP, ISIS-SR, and BGP-SR transport LSPs." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "IP VPN over ISIS-SR", "cmd": "IP VPN over ISIS-SR", "desc": "The following figure illustrates an overview of the combined control and data planes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "IP VPNs Over LDP", "cmd": "IP VPNs Over LDP", "desc": "The following figures illustrate an overview of the combined control and data planes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "IP VPNs Over BGP-SR", "cmd": "IP VPNs Over BGP-SR", "desc": "The following figures illustrate an overview of the combined control and data planes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "EVPN and VCS Commands", "cmd": "EVPN and VCS Commands", "desc": "Global Configuration Mode • router general Router BGP Configuration Mode • next-hop resolution disabled • redistribute service vxlan • route-target • route-target export • route-target import • route-target route-map" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "bfd vtep evpn", "cmd": "bfd vtep evpn interval interval-milliseconds min-rx min-rx-milliseconds multiplier multiplier-range\nno bfd vtep evpn interval interval-milliseconds min-rx min-rx-milliseconds multiplier multiplier-range", "desc": "The bfd vtep evpn command to configure the BGP PIC Edge for EVPN VXLAN routes for remote VTEPs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "encapsulation VXLAN layer-3 set next-hop igp-cost", "cmd": "encapsulation VXLAN layer-3 set next-hop igp-cost\nno encapsulation VXLAN layer-3 set next-hop igp-cost\ndefault encapsulation VXLAN layer-3 set next-hop igp-cost", "desc": "The encapsulation VXLAN layer-3 set next-hop igp-cost command configures the underlay IGP metric for the VTEP reachability to be considered for BGP best path selection in the IP VRF that is importing the EVPN route." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "e-tree", "cmd": "vlan 100", "desc": "The vlan e-tree places the switch in VLAN configuration mode and allows configuration of E-Tree." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "ip hardware fib vxlan", "cmd": "ip hardware fib vxlan", "desc": "Ethernet23/1" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "leak routes", "cmd": "leak routes source-vrf source_name subscribe-policy route_map\nno leak routes source-vrf source_name\ndefault leak routes source-vrf source_name", "desc": "The leak routes command configures an inter-VRF route-leaking policy to allow routes to be leaked from one VRF to another using a route map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "next-hop resolution disabled", "cmd": "next-hop resolution disabled", "desc": "The next-hop resolution disabled command disables the next-hop resolution in routes received from BGP-EVPN peers." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "redistribute bgp evpn VXLAN", "cmd": "redistribute bgp evpn VXLAN", "desc": "The redistribute bgp evpn VXLAN command enables BGP-EVPN routes to be redistributed to VCS, which in turn advertises them to all VTEPs within the DC." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "redistribute router-mac next-hop vtep primary", "cmd": "redistribute router-mac next-hop vtep primary [router-mac | next-hop | vtep | primary]", "desc": "Use the redistribute router-mac next-hop vtep primary command in the MAC VRF configuration mode to advertise an EVPN type-2 route for the VARP MAC with a nexthop of the primary VTEP IP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "redistribute service VXLAN", "cmd": "redistribute service VXLAN", "desc": "The redistribute service VXLAN command enables BGP to redistribute the Layer 2 bridging information received from VCS." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "remote leaf host drop", "cmd": "remote leaf host drop", "desc": "The remote leaf host drop command allows the configuration of per-VLAN explicit drop routes for ETree." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "route-target export", "cmd": "service routing protocols model multi-agent", "desc": "The route-target export command allows you to export routes from a VRF to the local VPN table using the route target extended community list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "route-target import", "cmd": "route-target import [evpn | vpn-ipv4 | vpn-ipv6] RT any-as:value\nno route-target import\ndefault route-target import", "desc": "The route-target import command allows you to import route-target extended community lists from the local VPN table to the target VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "route-target route-map", "cmd": "route-target [import | export][evpn | vpn-ipv4 | vpn-ipv6] route-map RM\nno route-target route-map\ndefault route-target route-map", "desc": "The route-target route-map command allows you to export and import route target extended community lists from one VRF to another using route maps." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "router general", "cmd": "router general\nno router general\ndefault router general", "desc": "The router general command places the switch in Router-General Configuration Mode for the configuration of protocol-independent routing." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Multicast", "title": "router multicast vrf leak", "cmd": "router multicast vrf vrf-receiver-epvn leak group [prefix-list prefix-list-name][vrf vrf-name]", "desc": "The router multicast command places the switch in router multicast configuration mode to configure virtual routing and forwarding multicast traffic." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "show bgp evpn", "cmd": "show bgp evpn vni 3011", "desc": "The show bgp evpn command displays information about the BGP-EVPN routes of the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show vrf leak flapping", "cmd": "show vrf leak flapping", "desc": "The show vrf leak flapping command displays the flapping prefixes of the routes leaked from one VRF to another VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show VXLAN control-plane", "cmd": "show VXLAN control-plane", "desc": "To enable the user to quickly view which control planes and sources are importing reachability information into which VLANs, use the following show command: • export Restricts output to VLANs exporting to a control plane." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "vlan (VLAN-AWARE-Bundle configuration mode)", "cmd": "vlan [add | remove] range", "desc": "The vlan add/ remove command configures the VLAN range string in a VLAN-AWARE-BUNDLE." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "BGP", "title": "vni-aware-bundle", "cmd": "vni-aware-bundle vni_bundle_name", "desc": "The vni-aware-bundle command configures a BGP MAC-VRF containing Layer 2 routes from a group of VXLAN Network Identifiers (VNI)." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "MPLS", "cmd": "MPLS", "desc": "These sections describe the Arista MPLS implementation: • Configuring MPLS" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "MPLS Overview", "cmd": "MPLS Overview", "desc": "Multiprotocol Label Switching (MPLS) provides a networking process that replaces complete network addresses with short path labels for directing data packets to network nodes." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "MPLS Implementation", "cmd": "MPLS Implementation", "desc": "MPLS static rule parameters contain the following information: • A 20-bit value compared to the top header label of each MPLS packet." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "LSP Ping/Traceroute for MPLS Nexthop Group Tunnels", "cmd": "LSP Ping/Traceroute for MPLS Nexthop Group Tunnels", "desc": "The ping/traceroute mpls tunnel nexthop-group command checks the liveness of Nexthop Group tunnel endpoint for an MPLS Nexthop Group." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "LDP Hello Redundancy", "cmd": "LDP Hello Redundancy", "desc": "LDP Hello Redundancy establishes a redundant target Hello adjacency for each neighbor discovered through the Basic Discovery Mechanism using the LDP Extended Discovery mechanism." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "LDP Pseudowire Show Commands", "cmd": "show patch panel", "desc": "Use the show patch panel command to display the overall status of the configured pseudowire patches." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "EVPN MPLS Shared ESI Label", "cmd": "EVPN MPLS Shared ESI Label", "desc": "In a multihomed EVPN MPLS configuration, broadcast, unknown-unicast, and multicast (BUM) packets sent from a Non-Designated Forwarder (Non-DF) PE to a Designated Forwarder (DF) PE must carry the ESI label" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "LDP Graceful Restart", "cmd": "LDP Graceful Restart", "desc": "Label Distribution Protocol (LDP) Graceful Restart allows devices to preserve MPLS LDP LFIB entries in the forwarding plane during the loss of a TCP connection or the LDP agent restarts." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "LDP Pseudowire", "cmd": "LDP Pseudowire", "desc": "LDP pseudowire provides support for emulating Ethernet connections over a Multiprotocol Label Switching (MPLS) network, and controlled using the extension of the MPLS Label Distribution Protocol (LDP)." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "MPLS Commands", "cmd": "MPLS Commands", "desc": "MPLS Commands • MPLS Commands • entropy-label • mpls icmp source-interface • mpls ip • mpls parsing speculative • mpls shared index • mpls static • mpls static vrf-label • mpls tunnel termination • mpls tunnel termination (vrf qos map)" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "authentication", "cmd": "authentication [index 1-4294967295 [active | password ]|[sequence-number window 1-255]|[type [md5 |\nno authentication [index 1-4294967295 [active | password ]|[sequence-number window 1-255]|[type\ndefault authentication [index 1-4294967295 [active | password ]|[sequence-number window 1-255]|", "desc": "Use the authentication command to enable cryptographic authentication." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "cspf delay", "cmd": "cspf delay [initial n back-off n] max n\nno cspf delay [initial n back-off n] max n\ndefault cspf delay [initial n back-off n] max n", "desc": "RSVP-TE uses CSPF to compute the FRR backup path." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "entropy-label", "cmd": "entropy-label\nno entropy-label", "desc": "The entropy-label command enables the MPLS LDP Entropy Label." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "fast-reroute", "cmd": "fast-reroute [mode [ link-protection | node-protection | none]|[reversion [global | local]]", "desc": "Use the fast-reroute command to support Fast Reroute (FRR) link protection/NHOP (RFC 4090)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "fast-reroute reversion", "cmd": "fast-reroute reversion [global | local]", "desc": "You can change the revertive behavior of the FRR from the global revertive mode to the local revertive mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "graceful-restart", "cmd": "graceful-restart [role [helper | speaker]] [timer [recovery | restart]] [maximum timer_value]", "desc": "The graceful-restart command configures Graceful Restart for RSVP which preserves data plane traffic when RSVP agents restart." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "hello interval", "cmd": "hello interval [interval [sec]] [multiplier [num]]\nno hello interval [interval [sec]][multiplier [num]]\ndefault hello interval [interval [sec]][multiplier [num]]", "desc": "The hello interval command sets the time between the hello packets." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "mpls ldp graceful-restart", "cmd": "graceful-restart role [[helper [ timer [ neighbor-liveness seconds] [ recovery", "desc": "The ldp graceful-restart command enables MPLS LDP (Label Distribution Protocol) Graceful Restart (GR) functionality." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "mpls icmp source-interface", "cmd": "mpls icmp [fragmentation-needed | ip | ipv6 ttl-exceeded]\nno mpls icmp [fragmentation-needed | ip | ipv6 ttl-exceeded]", "desc": "The mpls icmp source-interface command permits the designation of a source interface as an IPv4 address or IPv6 address." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "mpls ip", "cmd": "mpls ip\nno mpls ip\ndefault mpls ip", "desc": "The mpls ip command enables MPLS routing." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "mpls parsing speculative", "cmd": "mpls parsing speculative [control-word | ethernet | ipv4 | ipv6]", "desc": "Use the mpls parsing speculative command to configure parsing additional header types used by the load-balancing hash algorithm." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "mpls shared index", "cmd": "mpls shared index index-value\nno mpls shared index index-value", "desc": "The mpls shared index command configures an Ethernet-Segment (ES) shared-index to allocate an ESI label value based on the shared-index configuration." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "mpls static", "cmd": "mpls tunnel static top-label top_tag[ bgp peer [peer IP]] [DEST_INTF] NEXTHOP_ADDR ACTION\nno mpls tunnel static top-label top_tag\nno mpls tunnel static top-label top_tag [DEST_INTF] NEXTHOP_ADDR ACTION [PRIORITY]\ndefault mpls tunnel static top-label top_tag\ndefault mpls tunnel static top-label top_tag [DEST_INTF] NEXTHOP_ADDR ACTION", "desc": "The mpls static command creates an MPLS rule that specifies the method of handling of inbound MPLS traffic." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "mpls static vrf-label", "cmd": "mpls static vrf-label mpls-label [vrf vrf-name]\nno mpls static vrf-label mpls-label [vrf vrf-name]\ndefault mpls static vrf-label mpls-label [vrf vrf-name]", "desc": "Use the mpls static vrf-label command to configure a static VRF label route." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "mpls tunnel termination", "cmd": "mpls tunnel termination [ model [php model][ttl [[pipe | uniform] dscp]| pipe | uniform]\nno mpls tunnel termination [model [php model][ttl [[pipe | uniform] dscp]| pipe | uniform]\ndefault mpls tunnel termination [model [php model][ttl [[pipe | uniform] dscp]| pipe | uniform]", "desc": "• model Tunnel termination TTL and DSCP model." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "mpls tunnel termination (vrf qos map)", "cmd": "mpls tunnel termination\nvrf", "desc": "The mpls tunnel termination (vrf qos map) command changes configuration mode to allow the attachment of DSCP-to-traffic-class maps to specific VRFs." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "mpls tunnel static", "cmd": "mpls tunnel static tunnel-name tunnel-endpoint Null0", "desc": "The mpls tunnel static command in the Global Configuration Mode prevents installing a backup path for Destination-based Remote Triggered Black Hole used to prevent DoS attacks on a target network by dropping traffic destined for the target." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "neighbor", "cmd": "neighbor ip_address [authentication index password_index active] [targeted]\nno neighbor ip_address", "desc": "The neighbor ip_address command in the MPLS LDP Configuration Mode configures an IP address for an LDP neighbor for authentication or as a targeted peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "neighbor end-of-lib", "cmd": "neighbor end-of-lib\nno neighbor end-of-lib\ndefault neighbor end-of-lib", "desc": "The neighbor end-of-lib command in the MPLS LDP Configuration Mode allows an LDP speaker to notify a neighbor after completion of advertising all labels from the Label Information Base (LIB)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "neighbor hello-redundancy", "cmd": "neighbor hello-redundancy [duration [infinite | seconds] none]\nno neighbor hello-redundancy\nneighbor hello-redundancy none", "desc": "The neighbor hello-redundancy command in the MPLS LDP Configuration Mode configures an LDP neighbor to send LDP Hellos on a primary interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "ping mpls rsvp session", "cmd": "ping mpls rsvp session id 1 lsp 1 repeat 3", "desc": "LSP Ping allows the user to check if the remote endpoint of an RSVP session is reachable through the LSP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "preemption method", "cmd": "preemption method [hard | soft ] timer t\nno preemption method [hard | soft ] timer t\ndefault preemption method [hard | soft ] timer t", "desc": "The preemption method command enables deferred failure of RSVP-TE LSPs on link oversubscription." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "refresh method", "cmd": "refresh method [bundled | explicit ]", "desc": "Using the refresh method command with the bundled keyword enables the Refresh Overhead Reduction that supports the sending of message IDs and refreshing state with refresh messages." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show mpls parsing speculative", "cmd": "show mpls parsing speculative", "desc": "The show mpls parsing speculative command displays information about the MPLS Speculative Parsing configuration." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show mpls route summary", "cmd": "show mpls route summary", "desc": "The show mpls route summary command displays statistics about the configuration and implementation of MPLS rules." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show mpls route", "cmd": "show mpls [INFO_LEVEL] route [header_label]", "desc": "The show mpls config route command displays the switch’s MPLS static rule configuration for the specified routes and rules." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "apply", "cmd": "apply", "desc": "up pop ipv4" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "EVPN MPLS Shared ESI Label Show Commands", "cmd": "show bgp evpn instance", "desc": "The following show command displays the operational state when EVPN MPLS shares the ESI label between all the PEs in that Ethernet-Segment:" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "LDP Entropy Label", "cmd": "LDP Entropy Label", "desc": "If a network device uses deep packet inspection for load balancing, Arista Networks recommends to use entropy label in LDP to improve load balancing in MPLS networks by providing sufficient entropy in the" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show mpls tunnel termination qos maps", "cmd": "show mpls tunnel termination qos maps [ vrf vrf_name ]", "desc": "The show mpls tunnel termination qos maps command shows the DSCP to TC map associated with each VRF, or with a specified VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "show traffic-engineering cspf path", "cmd": "show traffic-engineering cspf path [destination-IP]detail]", "desc": "Use the show traffic-engineering cspf path command to display all the paths counted by CSPF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "show traffic-engineering database", "cmd": "show traffic-engineering database", "desc": "Use the show traffic-engineering database to display the topology used for CSPF computations." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "srlg", "cmd": "srlg strict\nno srlg strict\ndefault srlg strict", "desc": "The srlg command specifies if link SRLGs of a primary LSP are to be considered as constraints while creating a fast-reroute bypass tunnel with either link or node protection." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "vrf (MPLS tunnel termination)", "cmd": "vrf vrf_name", "desc": "The vrf (MPLS tunnel termination) command places the switch in MPLS Tunnel Termination VRF Configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "LDP over RSVP", "cmd": "LDP over RSVP", "desc": "LSPs formed by LDP normally follow IGP routing." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "Class Based Forwarding for MPLS Labeled Packets", "cmd": "Class Based Forwarding for MPLS Labeled Packets", "desc": "Class Based Forwarding (CBF) provides a means for forwarding traffic through selected tunnels based on the traffic class of the incoming packet." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "administrative-group", "cmd": "administrative-group [ include any ] | [include all ] | [exclude\ndefault administrative-group\nno administrative-group", "desc": "The administrative-group command specifies the inclusion or exclusion of links that are part of an administrative group." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "alias endpoint", "cmd": "alias endpoint [ ipv4_address | ipv6_address]\nno alias endpoint\ndefault alias endpoint", "desc": "The alias endpoint command configures a tunnel endpoint alias for both IPv4 and IPv6 endpoints and allows the additional next-hops to resolve using the existing tunnel." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "authentication index", "cmd": "authentication index password", "desc": "The authentication index command configures the MPLS RSVP cryptographic authentication password globally for outgoing messages to the specified neighbor." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "authentication sequence-number window", "cmd": "authentication sequence-number window size_num\nno authentication sequence-number window\ndefault authentication sequence-number window", "desc": "The authentication sequence-number window command configures the size of the sequence number reorder window for incoming MPLS RSVP messages." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "authentication type", "cmd": "authentication type {md5 | none}\nno authentication type {md5 | none}\ndefault authentication type {md5 | none}", "desc": "The authentication type command configures the MPLS RSVP cryptographic authentication type globally." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "bandwidth", "cmd": "bandwidth 0-1000 (bps | kbps | mbps | gbps)\nadjustment-period seconds]\nbandwidth signaling [ disabled ]\nno bandwidth 0-1000 (bps | kbps | mbps | gbps)\ndefault bandwidth 0-1000 (bps | kbps | mbps | gbps)\nno bandwidth auto\ndefault bandwidth auto\nno bandwidth signaling\ndefault bandwidth signaling", "desc": "The bandwidth command configures the reserve bandwidth within the tunnel." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "clear mpls rsvp counters", "cmd": "clear mpls rsvp counters\nclear mpls rsvp counters ( ip | ipv6 ) access-list", "desc": "The clear mpls rsvp counters command clears RSVP message counters." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "clear mpls rsvp session", "cmd": "clear mpls rsvp session ( | all ) [ detail ]", "desc": "The clear mpls rsvp session command can be used to clear RSVP sessions." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "color", "cmd": "default color - would inherit the color from the profile if one is configured\nno color\ncolor disabled - explicitly disables the color configuration irrespective of a profile being configured", "desc": "The color command assigns a color to a tunnel to publish the tunnel to the system-colored-tunnelrib, to help steer traffic into the tunnel." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "cspf delay", "cmd": "cspf delay [initial n back-off n] max n\nno cspf delay\ndefault cspf delay", "desc": "RSVP-TE uses CSPF to compute the FRR backup path." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "cspf ecmp tie-break", "cmd": "cspf ecmp tie-break (least-fill|random)\nno cspf ecmp tie-break\ndefault cspf ecmp tie-break", "desc": "The cspf ecmp tie-break command disables bandwidth least-fill when the random option is selected, and enables bandwidth least-fill when least-fill is selected." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "destination ip", "cmd": "destination ip IP_address\nno destination ip\ndefault destination ip", "desc": "Each tunnel requires a destination IP to function." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "fast-reroute bypass tunnel optimization interval", "cmd": "fast-reroute bypass tunnel optimization interval < number of seconds > seconds\nno fast-reroute bypass tunnel optimization interval\ndefault fast-reroute bypass tunnel optimization interval", "desc": "The fast-reroute bypass tunnel optimization interval command configures the interval at which paths used for bypass tunnels are re-optimized." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "fast-reroute mode (RSVP tunnel)", "cmd": "fast-reroute mode ( link-protection | node-protection | none }\nno fast-reroute mode\ndefault fast-reroute mode", "desc": "The fast-reroute mode command by default, RSVP tunnels inherit fast-reroute settings from the global RSVP configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "fast-reroute mode", "cmd": "fast-reroute mode (link-protection | node-protection | none)\nno fast-reroute mode\ndefault fast-reroute mode", "desc": "The fast-reroute mode command configures fast-reroute (FRR) (RFC 4090)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "fast-reroute reversion", "cmd": "fast-reroute reversion (global | local)\ndefault fast-reroute reversion\nno fast-reroute reversion", "desc": "You can change the revertive behavior of the FRR from the global revertive mode to the local revertive mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "graceful-restart role", "cmd": "graceful-restart role (helper | speaker)\nno graceful-restart role (helper | speaker)\ndefault graceful-restart role (helper | speaker)\ntimer restart maximum seconds - The maximum accepted restart time value is configurable\nunder helper configuration mode.\ndefault timer restart maximum\nno timer restart maximum\ntimer recovery maximum seconds - The maximum accepted recovery time value, configured\nunder helper configuration mode.\ndefault timer recovery maximum\nno timer recovery maximum\ntimer restart seconds - The restart time value is configurable under the speaker\nconfiguration mode.\ndefault timer restart\nno timer restart\ntimer recovery seconds - The recovery time value is configurable under the speaker\nconfiguration mode.\ndefault timer recovery\nno timer recovery", "desc": "The graceful-restart role command enables a graceful-restart role for RSVP (helper or speaker) and enters the configuration mode for that role." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "hello interval", "cmd": "hello interval multiplier \nno hello interval\ndefault hello interval", "desc": "The hello interval command sets the time between the hello packets." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "hardware next-hop fast-failover", "cmd": "hardware next-hop fast-failover\nno hardware next-hop fast-failover\ndefault hardware next-hop fast-failover", "desc": "The hardware next-hop fast-failover command enables hardware-accelerated next-hop failover on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "hello-redundancy", "cmd": "neighbor hello-redundancy [duration seconds]\ndefault neighbor hello-redundancy\nno neighbor hello-redundancy", "desc": "The hello-redundancy command is suggested for Hello Redundancy when used with LDP over RSVP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "hitless-restart", "cmd": "hitless-restart\nno hitless-restart\ndefault hitless-restart\ntimer recovery maximum seconds - The maximum accepted recovery time value, configured\nunder hitless-restart configuration mode.\ndefault timer recovery maximum\nno timer recovery maximum\ndefault timer recovery\nno timer recovery", "desc": "The hitless-restart command enables RSVP hitless restart." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "hop (dynamic path)", "cmd": "hop [ [exclude] | [loose] [ [before | after ] ] ]\ndefault hop - If no address is supplied then all hops are removed.\nno hop [] - If no address is supplied then all hops are removed.", "desc": "The hop command adds a hop to the configuration-mode dynamic path." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "hop (explicit path)", "cmd": "hop [before IPv4_address | after ]\ndefault hop [ ] - If no address is supplied then all hops are removed.\nno hop [] - If no address is supplied then all hops are removed.", "desc": "The hop command adds a hop to the configuration-mode explicit path." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "label local-termination", "cmd": "label local-termination (explicit-null | implicit-null)\nno label local-termination\ndefault label local-termination", "desc": "The label local-termination command enables an egress LSR to advertise an IPv4 explicit-null label (Label 0) to its upstream router by using the explicit-null option." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "igp shortcut", "cmd": "igp shortcut\ndefault igp shortcut\nno igp shortcut", "desc": "The igp shortcut command is used to specify whether a RSVP tunnel should participate in Interior Gateway Protocol (IGP) shortcuts." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "local-interface", "cmd": "local-interface int_type int_num\nno local-interface\ndefault local-interface", "desc": "The local-interface command specifies a local interface from which to derive the source IP address for RSVP-TE tunnels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "lsp no-path preservation timer", "cmd": "lsp no-path preservation timer seconds seconds\nno lsp no-path preservation timer\ndefault lsp no-path preservation timer", "desc": "The preservation timer command in the Traffic-Engineering RSVP Configuration Mode configures a timer to control how long the switch maintains an original Label Switched Path (LSP) if a Make-Before-Break" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "lsp self-ping", "cmd": "lsp self-ping\ndefault lsp self-ping\nno lsp self-ping", "desc": "The lsp self-ping command enables LSP self-ping (RFC 7746)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "metric", "cmd": "default metric\nno metric", "desc": "The metric command configures a per RSVP tunnel metric to allow specific tunnels to a tunnel endpoint take precedence over other tunnels to the same tunnel endpoint when forming ECMP." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "mpls rsvp", "cmd": "mpls rsvp\ndefault mpls rsvp - Will wipe the configuration in the mode and disable RSVP.\nno mpls rsvp - Will wipe the configuration in the mode and disable RSVP.", "desc": "The mpls rsvp command places the switch in MPLS RSVP configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "mtu signaling", "cmd": "mtu signaling\nno mtu signaling\ndefault mtu signaling", "desc": "The mtu signaling command configures RSVP to enable MTU discovery." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "neighbor authentication index", "cmd": "neighbor neighbor_address authentication index index_num active\nno neighbor neighbor_address authentication index index_num active\ndefault neighbor neighbor_address authentication index index_num active", "desc": "The neighbor authentication index command configures the MPLS RSVP cryptographic authentication password for outgoing messages to the specified neighbor." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "neighbor authentication type", "cmd": "neighbor neighbor_address authentication type (md5 | none)\nno neighbor neighbor_address authentication type\ndefault neighbor neighbor_address authentication type", "desc": "The neighbor authentication type command configures the MPLS RSVP cryptographic authentication type for the specified neighbor." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "optimization interval", "cmd": "optimization interval seconds\ndefault optimization\nno optimization", "desc": "Periodic tunnel optimization can be configured globally or individually for a specific tunnel using the optimization interval command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "p2mp", "cmd": "p2mp\ndefault p2mp\nno p2mp", "desc": "From the config-mpls-rsvp configuration mode, the p2mp command places the switch in mpls-rsvpp2mp configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "path (path specification)", "cmd": "path spec_name (dynamic | explicit)\nno path spec_name\ndefault path spec_name", "desc": "The path command in Traffic Engineering RSVP Tunnel P2P configuration mode specifies the configuration mode for the path." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "path (RSVP tunnel)", "cmd": "path spec_name (secondary pre-signaled)\nno path spec_name (secondary)\ndefault path spec_name(secondary)", "desc": "The path command in Traffic Engineering RSVP Tunnel configuration mode specifies a primary or secondary path along which the LSPs are established for the configuration-mode RSVP tunnel." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "ping mpls rsvp session", "cmd": "ping mpls rsvp session ([id num [lsp lspId ] | name word)] [pad-reply] [repeat ", "desc": "The ping mpls rsvp session command allows the user to check if the remote endpoint of an RSVP session is reachable through the LSP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "preemption method", "cmd": "preemption method (hard | soft ) [timer ]\nno preemption method\ndefault preemption method", "desc": "The preemption method command enables deferred failure of RSVP-TE LSPs on link oversubscription." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "priority", "cmd": "priority 0-7\nsetup 7 hold 0\ndefault priority", "desc": "The priority command configures the tunnel priority." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "refresh interval", "cmd": "refresh interval seconds\nno refresh interval\ndefault refresh interval", "desc": "The refresh interval command configures the interval at which MPLS RSVP Path and Resv messages are sent to refresh the state." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "refresh method", "cmd": "no Srefresh method - More tokens allowed but ignored.\ndefault Srefresh method - More tokens allowed but ignored.", "desc": "Using the Srefresh method command with the bundled keyword enables the Refresh Overhead Reduction that supports the sending of message IDs and refreshing state with refresh messages." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "refresh rsvp tunnel optimization", "cmd": "refresh rsvp tunnel optimization (all | name tunnel_name [avoid ecmp hop ecmp_hops] )", "desc": "When periodic tunnel optimization is not configured, tunnels will not re-optimize automatically, but they can be optimized on demand by using the refresh rsvp tunnel optimization command." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "router traffic-engineering – not an RSVP command", "cmd": "router traffic-engineering", "desc": "The router traffic-engineeing command places the switch in Traffic Engineering configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "rsvp", "cmd": "rsvp\ndefault rsvp\nno rsvp", "desc": "The rsvp command places the switch in Traffic Engineering RSVP configuration mode." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "rsvp bypass administrative-group", "cmd": "rsvp bypass administrative-group [ include any ] | [include all ] |\nno rsvp bypass administrative-group\ndefault rsvp bypass administrative-group", "desc": "The rsvp bypass administrative-group command specifies administrative groups that must be included in, or excluded from, the links used for CSPF path computation." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show mpls rsvp", "cmd": "show mpls rsvp", "desc": "Use the show mpls rsvp to display the overall state of the RSVP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "show mpls rsvp counters", "cmd": "Port-Channel | Switch | Tunnel | Vlan | Vxlan]]", "desc": "Use the show mpls rsvp counters command to display RSVP message counters, per interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show mpls rsvp neighbor", "cmd": "show mpls rsvp neighbor [A.B.C.D | A:B:C:D:E:F:G:H | summary]", "desc": "Use the show mpls rsvp neighbor command to display information about all RSVP neighbors, or for a specific neighbor." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show mpls rsvp session", "cmd": "show mpls rsvp session ( | all ) [ detail ]", "desc": "The show mpls rsvp session command displays RSVP session information." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show rib system-tunneling-ldp-rib route ip", "cmd": "show rib system-tunneling-ldp-rib route ip", "desc": "The show rib system-tunneling-ldp-rib route ip command shows RSVP tunnel next hop resolutions for LDP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "show traffic-engineering cspf path", "cmd": "show traffic-engineering cspf path [destination-IP ] [detail]\npath or tunnel name can be specified.\nthe CSPF paths with a given destination IP address.", "desc": "The show traffic-engineering cspf path command displays all the paths counted by CSPF." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show traffic-engineering rsvp tunnel detail", "cmd": "show traffic-engineering rsvp tunnel detail", "desc": "The show traffic-engineering rsvp tunnel detail command shows RSVP tunnel detail including LDP tunneling eligibility." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "Tunnel tunnel2to5via3", "cmd": "Tunnel tunnel2to5via3", "desc": "Source: 2.2.2.2 Destination: 5.5.5.5 State: up Bandwidth: 0.0 bps, mode explicit Setup priority: 7 Hold priority: 0 MTU signaling: disabled Periodic optimization: disabled Session #2 Tunnel index: 2 LSPs: 1" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show traffic-engineering rsvp tunnel history", "cmd": "show traffic-engineering rsvp tunnel history", "desc": "Display the history of a RSVP tunnel." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show traffic-engineering rsvp tunnel lsp", "cmd": "show traffic-engineering rsvp tunnel lsp", "desc": "Display RSVP tunnel LSPs using the show traffic-engineering rsvp tunnel lsp command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "LSP 2:", "cmd": "LSP 2:", "desc": "Path specification: Path2to4detour, secondary Bandwidth: 0." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show traffic-engineering rsvp tunnel name", "cmd": "show traffic-engineering rsvp tunnel name", "desc": "Display the status of a specific RSVP tunnel, using the name of the tunnel with the show trafficengineering rsvp tunnel name command." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show traffic-engineering rsvp tunnel sub-tunnel summary", "cmd": "show traffic-engineering rsvp tunnel sub-tunnel summary", "desc": "Display split tunnel information in a summarized fashion using the show traffic-engineering rsvp tunnel sub-tunnel summary command." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show traffic-engineering rsvp", "cmd": "show traffic-engineering rsvp", "desc": "The show traffic-engineering rsvp command displays the current status of traffic engineering RSVP." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "split-tunnel", "cmd": "bandwidth_units [sub-tunnels limit max_tunnels] ))\nno split-tunnel\ndefault split-tunnel", "desc": "The split-tunnel command enables and configures RSVP sub-tunnels." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "to 1000.00 and the units may be bps, kbps, mbps, or gbps.", "cmd": "to 1000.00 and the units may be bps, kbps, mbps, or gbps.", "desc": "• max bandwidth_num units - Configures the maximum bandwidth for each sub-tunnel." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "srlg", "cmd": "srlg [strict]\nno srlg\ndefault srlg", "desc": "The srlg command specifies if link SRLGs of a primary LSP are to be considered as constraints while creating a fast-reroute bypass tunnel with either link or node protection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "neighbor targeted", "cmd": "neighbor ip_address targeted\nno neighbor ip_address targeted\ndefault neighbor targeted", "desc": "The neighbor targeted command is used to configure a targeted adjacency with a non-adjacent router from the LDP configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "timer recovery", "cmd": "timer recovery numseconds\nno timer recovery\ndefault timer recovery\ntimer recovery maximum seconds - The maximum accepted recovery time value, configured\nunder helper configuration mode.\ndefault timer recovery maximum seconds\nno timer recovery maximum seconds\ntimer recovery seconds - The requested recovery time value is configurable under the speaker\nconfiguration mode.", "desc": "This command will have a different behavior depending on the command mode (speaker or helper)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "timer restart", "cmd": "timer restart maximum seconds - The maximum accepted restart time value is configurable\nunder helper configuration mode.\ndefault timer restart maximum seconds\nno timer restart maximum seconds\ntimer restart seconds - The restart time value is configurable under the speaker\nconfiguration mode.\ndefault timer restart seconds\nno timer restart seconds\ntimer recovery seconds - The recovery time value is configurable under the speaker\nconfiguration mode.", "desc": "The timer restart command configures a maximum acceptable value for RSVP graceful restart timers received from RSVP neighbors." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "traffic-engineering srlg", "cmd": "traffic-engineering srlg (srlg_name|srlg_group_ID)\nno traffic-engineering srlg (srlg_name|srlg_group_ID)\ndefault traffic-engineering srlg (srlg_name|srlg_group_ID)\nname", "desc": "The traffic-engineering srlg command configures a shared risk link group (SRLG) for the command-mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "tunnel", "cmd": "tunnel name [p2mp]\nno tunnel name [p2mp]\ndefault tunnel name [p2mp]", "desc": "The tunnel command enters Traffic Engineering RSVP Tunnel configuration mode for the named tunnel." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "tunneling ldp", "cmd": "tunneling ldp", "desc": "LDP over RSVP is configured by enabling the tunneling ldp command." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "tunneling ldp ucmp", "cmd": "tunneling ldp ucmp", "desc": "The tunneling ldp ucmp command configures UCMP with LDP over RSVP." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show traffic-engineering rsvp tunnel summary", "cmd": "show traffic-engineering rsvp tunnel summary", "desc": "Display a summary of the status of an RSVP tunnel using the show traffic-engineering rsvp tunnel summary command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "bps", "cmd": "bps", "desc": "up Resource Reservation Protocol for Traffic Engineering (RSVP-TE)" }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "show traffic-engineering rsvp tunnel", "cmd": "show traffic-engineering rsvp tunnel", "desc": "Display the traffic engineering RSVP tunnel status using the show traffic-engineering rsvp tunnel command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "TAP Aggregation Introduction", "cmd": "TAP Aggregation Introduction", "desc": "Ethernet-based switches are commonly deployed in dedicated networks to support Test Access Point (TAP) and mirror port traffic toward one or more analysis applications." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "TAP Aggregation Description", "cmd": "TAP Aggregation Description", "desc": "These sections describe TAP aggregation, timestamps, and keyframes: • TAP Aggregation • Timestamps and Keyframes" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "TAP Aggregation", "cmd": "TAP Aggregation", "desc": "Test Access Point (TAP) aggregation is the accumulation of data streams and the subsequent dispersal of these streams to devices and applications that analyze, test, verify, parse, detect, or store data." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "TAP Aggregation Extra MPLS Pop Configuration", "cmd": "TAP Aggregation Extra MPLS Pop Configuration", "desc": "MPLS pop is configurable per tap port as follows to pop one to three labels:" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "IP Steering", "cmd": "IP Steering", "desc": "IP steering does not work for MPLS packets with four or more labels." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "TAP Aggregation MPLS Pop", "cmd": "TAP Aggregation MPLS Pop", "desc": "The MPLS pop supports tools that do not parse MPLS labels and therefore need the switch to remove (pop) the MPLS header." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "TAP Aggregation 802.1br EVN Tag Stripping", "cmd": "TAP Aggregation 802.1br EVN Tag Stripping", "desc": "802.1br-E/VN Tag Stripping feature for Tap Aggregation mode strips IEEE 802.1BR E-Tag and Cisco VNTag headers from all tagged packets received on tap interface before delivering them out of tool interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "TAP Aggregation Commands", "cmd": "TAP Aggregation Commands", "desc": "Global Configuration Commands • hardware forwarding system-profile-tap-aggregation • platform fm6000 keyframe • platform fm6000 keyframe device • platform fm6000 keyframe fields skew • platform fm6000 keyframe rate" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "class (policy-map (tapagg))", "cmd": "default [SEQ_NUM] class class_name\nno [SEQ_NUM] class class_name", "desc": "The class (policy-map (tapagg)) command places the switch in the policy-map-class (TAPagg) configuration mode, which is a group-change mode that defines a TAP aggregation class by associating the class’s eponymous class-map to a set statement." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "class-map type tapagg", "cmd": "class-map type tapagg match-any class_name\nno class-map type tapagg match-any class_name\ndefault class-map type tapagg match-any class_name", "desc": "The class-map type tapagg command places the switch in class-map (tapagg) configuration mode, which is a group change mode that modifies a tapagg class map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "encapsulation", "cmd": "encapsulation {dot1br | vn-tag} strip\nno encapsulation {dot1br | vn-tag} strip\ndefault encapsulation {dot1br | vn-tag} strip", "desc": "The encapsulation command is configured under Tap Aggregation mode to enable the 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "hardware forwarding system-profile-tap-aggregation", "cmd": "hardware forwarding system profile [system-profile-default | system-profile-tap-aggregation |\ndefault hardware forwarding system profile [system-profile-default | system-profile-tapaggregation | module]", "desc": "The hardware forwarding system-profile-tap-aggregation command sets the global hardware forwarding system profile on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "mac runt", "cmd": "mac runt [drop | pad | pass-through]", "desc": "The mac runt command configures runt packet behavior for TAP aggregation on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "mac timestamp", "cmd": "mac timestamp TS_PROPERTY", "desc": "The mac timestamp command enables timestamping on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "ACL", "title": "match (class-map (tapagg))", "cmd": "no SEQ_NUM] match ip access-group list_name\ndefault SEQ_NUM] match ip access-group list_name", "desc": "The match command adds an ACL to the configuration-mode class map and associates a sequence number to the ACL." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "match (policy-map (tapagg))", "cmd": "SET_VALUE\nno match [VLAN_TAG] SOURCE_ADDR [SOURCE_PORT] DEST_ADDR [DEST_PORT] [PROTOCOL]\ndefault match [VLAN_TAG] SOURCE_ADDR [SOURCE_PORT] DEST_ADDR [DEST_PORT]\nprotocol. Use CLI syntax assistance to view options for specific protocols when creating a\npermit rule.", "desc": "The match command adds a rule to the configuration-mode TAP aggregation policy map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "mode (tap-agg configuration mode)", "cmd": "mode exclusive\nno mode exclusive\ndefault mode exclusive", "desc": "The mode command configures the switch’s TAP aggregation mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "mode exclusive no-errdisable (tap-agg configuration mode)", "cmd": "mode exclusive no-errdisable INT_NAME", "desc": "The mode exclusive no-errdisable command configures the specified interface to remain enabled, regardless of its switchport mode, when TAP aggregation is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "platform fm6000 keyframe", "cmd": "platform fm6000 keyframe kf_name interface ethernet [e_range ipv4_addr mac_addr\nno platform fm6000 keyframe kf_name\ndefault platform fm6000 keyframe kf_name", "desc": "The platform fm6000 keyframe command enables keyframe generation for data streams transmitted from specified ethernet interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "platform fm6000 keyframe device", "cmd": "platform fm6000 keyframe kf_name device device_id\nno platform fm6000 keyframe kf_name device\ndefault platform fm6000 keyframe kf_name device", "desc": "The platform fm6000 keyframe device command configures the 16-bit number that the specified keyframe lists as the device ID in its payload." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "platform fm6000 keyframe fields skew", "cmd": "platform fm6000 keyframe kf_name fields skew", "desc": "Keyframes may optionally include skew numerator and skew denominator fields." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "platform fm6000 keyframe rate", "cmd": "platform fm6000 keyframe kf_name rate tx_rate", "desc": "The platform fm6000 keyframe rate command specifies the transmission rate for the specified keyframe from each interface from which it is configured to egress." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "platform fm6000 keyframe source", "cmd": "platform fm6000 keyframe kf_name source ip ipv4_addr\nno platform fm6000 keyframekf_name source ip\ndefault platform fm6000 keyframe kf_name source ip", "desc": "The platform fm6000 keyframe source command configures the source IP address that the specified keyframe lists in its IP header." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "platform sand multicast replication default", "cmd": "platform sand multicast replication default {fabric-egress | ingress}\nno platform sand multicast replication default\ndefault platform sand multicast replication default", "desc": "The platform sand multicast replication default command configures the default replication mode on Sand platform switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Multicast", "title": "platform sand multicast replication ingress maximum", "cmd": "platform sand multicast replication ingress maximum max_value\nno platform sand multicast replication ingress maximum\ndefault platform sand multicast replication ingress maximum", "desc": "The platform sand multicast replication ingress maximum command configures maximum members for ingress-only replication." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "policy-map type tapagg", "cmd": "policy-map type tapagg map_name\nno policy-map type tapagg map_name\ndefault policy-map type tapagg map_name", "desc": "The policy-map type tapagg command places the switch in policy-map (tapagg) configuration mode, which is a group-change mode that modifies a TAP-aggregation policy map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "service-policy type tapagg (Interface mode)", "cmd": "service-policy type tapagg input map_name", "desc": "The service-policy type tapagg command applies a specified TAP-aggregation policy map to the configuration-mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "set (policy-map-class (tapagg))", "cmd": "set SET_VALUE\nno set SET_VALUE\ndefault set SET_VALUE", "desc": "The set command specifies the data replication method for traffic filtered by the associated class map in the configuration-mode policy map." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show hardware tcam profile", "cmd": "show hardware tcam profile detail", "desc": "Use the show hardware tcam profile command to display The TCAM prifile by configuration and status." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces tap", "cmd": "show interfaces [INTERFACE] tap [INFO_LEVEL]", "desc": "The show interfaces tap command displays TAP-port configuration information for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces tool", "cmd": "show interfaces [INTERFACE] tool", "desc": "The show interfaces tool command displays tool port configuration information for the specified interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform fm6000 keyframe", "cmd": "show platform fm6000 keyframe [KEYFRAME_ID]", "desc": "The show platform fm6000 keyframe command displays configured information for the specified keyframes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show platform sand mcast capacity", "cmd": "show platform sand mcast capacity [threshold threshold_value]", "desc": "The show platform sand mcast capacity command displays the usage details of hardware resources on Sand platform switches." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "MPLS", "title": "TAP Aggregation Extra MPLS POP (4 to 6 Labels) Commands", "cmd": "TAP Aggregation Extra MPLS POP (4 to 6 Labels) Commands", "desc": "show hardware tcam profile" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "TAP Aggregation Configuration", "cmd": "TAP Aggregation Configuration", "desc": "These sections describe TAP aggregation configuration tasks: • Enabling Tap Aggregation Mode • Tap Aggregation Mixed Mode • Tap Port Configuration • Tool Port Configuration • Per-linecard TCAM Profile Configuration" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "TAP Aggregation Mixed Mode", "cmd": "TAP Aggregation Mixed Mode", "desc": "On a modular switch, the user can configure TAP Aggregation on some linecards and leave other linecards to operate normally." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "TAP Port Configuration", "cmd": "interface ethernet 41-43", "desc": "TAP ports function when the switch is in TAP aggregation mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "TAP Aggregation QoS Handling on TAP Ports", "cmd": "TAP Aggregation QoS Handling on TAP Ports", "desc": "Before EOS 4." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "TAP Aggregation Group Configuration", "cmd": "interface port-channel 101", "desc": "TAP aggregation groups associate a set of TAP ports with a set of tool ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "TAP Aggregation Traffic Steering", "cmd": "TAP Aggregation Traffic Steering", "desc": "Traffic steering is a TAP aggregation process that uses class maps and policy maps to direct data streams at tool ports that are not otherwise associated to the ingress TAP port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "TAP Aggregation Policies", "cmd": "TAP Aggregation Policies", "desc": "A policy map filters data packets by using classes and match rules." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "Traffic Steering to Match Inner Header Fields", "cmd": "Traffic Steering to Match Inner Header Fields", "desc": "This feature allows matching the inner header fields (either IPv4 or IPv6 inner fields) of encapsulated traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "eq 8888", "cmd": "eq 8888", "desc": "5. ACL rule for filtering an IPv6-over-GRE(IPv4) traffic based on the inner addresses, inner TCP/UDP protocol, and inner TCP/UDP ports. switch(config)# ip access-list acl4 switch(config-acl-acl4)# permit gre any any inner ipv6 udp host 2019::baba eq…" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "TAP Aggregation GUI", "cmd": "TAP Aggregation GUI", "desc": "The switch provides a Graphical User Interface (GUI) for creating and viewing a TAP aggregation configuration and displaying LANZ traffic statistics." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "TAP Aggregation Keyframe and Timestamp Configuration", "cmd": "TAP Aggregation Keyframe and Timestamp Configuration", "desc": "This section contains the following topics: • TAP Aggregation Keyframe Generation • Enabling Timestamp Insertion on an Interface" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "TAP Aggregation Keyframe Generation", "cmd": "platform fm6000 keyframe key-1 interface ethernet 11-15 10.21.1.4 10.4E21.9F11", "desc": "Keyframes contain routable IP packets that provide information to relate timestamps with the complete ASIC counter and absolute UTC time." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "Tap Aggregation Hardware Forwarding Profile", "cmd": "Tap Aggregation Hardware Forwarding Profile", "desc": "In order to enable the MPLS Pop and 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show tap aggregation groups", "cmd": "show tap aggregation groups [INFO_LEVEL] [GROUP_NAMES]", "desc": "The show tap aggregation groups command displays the TAP and tool port members of the specified TAP aggregation groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "MPLS", "title": "switchport mpls pop all", "cmd": "switchport [tool | tap] mpls pop all\nno switchport [tool | tap] mpls pop all", "desc": "The switchport mpls pop all command configures the MPLS Pop on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport tap allowed vlan", "cmd": "switchport tap allowed vlan EDIT_ACTION", "desc": "The switchport tap allowed vlan command creates or modifies the list of VLANs for which the configuration mode interface, in TAP mode, handles tagged traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "switchport tool encapsulation", "cmd": "switchport tool encapsulation {dot1br | vn-tag} strip\nno switchport tool encapsulation dot1br | vn-tag} strip\ndefualt switchport tool encapsulation dot1br | vn-tag} strip", "desc": "The switchport tool encapsulation command is configured under Ethernet Interface configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "switchport tap default group", "cmd": "switchport tap default group group_name\nno switchport tap default group\ndefault switchport tap default group", "desc": "The switchport tap default group command assigns the configuration-mode interface to the specified tool group as a TAP port member." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "switchport tap identity", "cmd": "switchport tap identity port_id\nno switchport tap identity\ndefault switchport tap identity", "desc": "The switchport tap identity command associates a VLAN number to the configuration mode TAP interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport tap native vlan", "cmd": "switchport tap native vlan v_num\nno switchport tap native vlan\ndefault switchport tap native vlan", "desc": "The switchport tap native vlan command specifies the TAP-mode native VLAN for the configuration-mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "switchport tap truncation", "cmd": "switchport tap truncation packet_size\nno switchport tap truncation\ndefault switchport tap truncation", "desc": "The switchport tap truncation command configures the configuration-mode interface, as a TAP port, to truncate inbound packets to the specified packet size." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport tool allowed vlan", "cmd": "switchport tool allowed vlan EDIT_ACTION", "desc": "The switchport tool allowed vlan command creates or modifies the list of VLANs for which the configuration-mode interface, in tool mode, handles tagged traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "switchport tool group", "cmd": "switchport tool group EDIT_ACTION", "desc": "The switchport tool group command modifies the configuration-mode interface’s tool port membership in the specified TAP aggregation groups." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "switchport tool identity", "cmd": "switchport tool identity dot1q\nno switchport tool identity dot1q\ndefault switchport tool identity dot1q", "desc": "The switchport tool identity command configures the configuration-mode interface to add a tier-1 VLAN tag (dot1q) to packets it receives from TAP ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "switchport tool truncation", "cmd": "switchport tool truncation packet_size\nno switchport tool truncation\ndefault switchport tool truncation", "desc": "The switchport tool truncation command configures the configuration-mode interface, as a tool port, to truncate outbound packets to 160 bytes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Logging", "title": "Logging LANZ Congestion Events", "cmd": "queue-monitor length log 10", "desc": "To generate syslog messages when queue lengths on an interface exceed its upper threshold, enable logging with the queue-monitor length log command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "clear queue-monitor length statistics", "cmd": "clear queue-monitor length statistics", "desc": "The clear queue-monitor length statistics command resets the occurrences of all overthreshold events on the switch, including global buffer information (if supported)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "max-connections", "cmd": "max-connections connections", "desc": "The max-connections command sets the maximum number of client connections the switch accepts for streaming LANZ data." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length (global configuration mode)", "cmd": "queue-monitor length\nno queue-monitor length\ndefault queue-monitor length", "desc": "The queue-monitor length (global configuration mode) command enables LANZ with the current settings, or with the default settings if LANZ has not yet been configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length cpu thresholds", "cmd": "queue-monitor length cpu thresholds [upper_limit | lower_limit]\nno queue-monitor length cpu thresholds\ndefault queue-monitor length cpu thresholds", "desc": "The queue-monitor length cpu thresholds command sets the queue length threshold to define “congested” on all CPU ports for purposes of LANZ reporting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length fabric thresholds", "cmd": "queue-monitor length fabric thresholds [upper_limit | lower_limit]\nno queue-monitor length fabric thresholds\ndefault queue-monitor length fabric thresholds", "desc": "The queue-monitor length fabric thresholds command sets the queue-monitor length thresholds to define “congested” on all fabric ports for purposes of LANZ reporting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length global-buffer log", "cmd": "queue-monitor length global-buffer log interval\nno queue-monitor length global-buffer log\ndefault queue-monitor length global-buffer log", "desc": "The queue-monitor length global-buffer log command enables logging of global buffer overthreshold events." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length global-buffer thresholds", "cmd": "queue-monitor length global-buffer thresholds max_segments min_segments\nno queue-monitor length global-buffer log\ndefault queue-monitor length global-buffer log", "desc": "The queue-monitor length global-buffer thresholds command sets global buffer thresholds for the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length global-buffer", "cmd": "queue-monitor length global-buffer\nno queue-monitor length global-buffer\ndefault queue-monitor length global-buffer", "desc": "The queue-monitor length global-buffer command includes global buffer usage in LANZ reporting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length log", "cmd": "queue-monitor length log interval", "desc": "The queue-monitor length log command enables logging of queue-length over-threshold events when LANZ is enabled on the switch (see queue-monitor length (global configuration mode))." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length mirror", "cmd": "queue-monitor length mirror", "desc": "The queue-monitor length mirror command enables LANZ mirroring." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "queue-monitor length mirror destination", "cmd": "queue-monitor length mirror destination cpu | ports", "desc": "The queue-monitor length mirror destination command results in automatically sending traffic experiencing congestion to either the CPU or an Ethernet egress interface destination, once a queue threshold is crossed." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length notifying", "cmd": "queue-monitor length notifying\nno queue-monitor length notifying\ndefault queue-monitor length notifying\noperate in Notifying Mode.\nenabled will cause LANZ to revert to Polling Mode.\ncongestion on CPU queues on Arad switches.", "desc": "The queue-monitor length notifying command enables Notifying Mode on Arad and Jericho switches." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length thresholds", "cmd": "queue-monitor length thresholds upper_limit lower_limit\nno queue-monitor length\ndefault queue-monitor length", "desc": "The queue-monitor length thresholds command sets both upper and lower queue length thresholds to define “congested” on the command-mode interface for purposes of LANZ reporting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length threshold (Arad/Jericho/Qumran)", "cmd": "queue-monitor length threshold upper_limit\nno queue-monitor length\ndefault queue-monitor length", "desc": "The queue-monitor length threshold command sets the upper queue-length threshold on Arad, Jericho, and Qumran platforms to define “congested” on the command-mode interface for purposes of LANZ reporting." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor length update-interval", "cmd": "queue-monitor length update-interval interval\nno queue-monitor length\ndefault queue-monitor length", "desc": "The queue-monitor length update-interval command sets the interval between congestion updates when LANZ is in Notifying Mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "queue-monitor streaming", "cmd": "queue-monitor streaming", "desc": "The queue-monitor streaming command places the switch in queue-monitor-streaming configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor length", "cmd": "show queue-monitor length", "desc": "The show queue-monitor length command displays a report of recent over-threshold events for all interfaces, limited to the last 1000 records, with the newest events listed first." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor length all", "cmd": "show queue-monitor length all", "desc": "The show queue-monitor length all command displays all available over-threshold event records on the switch including global buffer information, with the most recent events listed first." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor length cpu", "cmd": "show queue-monitor length cpu", "desc": "The show queue-monitor length cpu command displays LANZ data for CPU ports on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor length csv", "cmd": "show queue-monitor length csv", "desc": "The show queue-monitor length csv command displays LANZ records in Comma-Separated Value (CSV) format with the oldest samples displayed first." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor length drops", "cmd": "show queue-monitor length [INTERFACES][FACTOR] drops", "desc": "The show queue-monitor length drops command displays a report of cumulative transmission drop totals for a range of interfaces or for all interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor length ethernet", "cmd": "show queue-monitor length ethernet e-range", "desc": "The show queue-monitor length ethernet command displays a report of recent over-threshold events for a range of interfaces, with the newest events listed first." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor length global-buffer", "cmd": "show queue-monitor length global-buffer", "desc": "The show queue-monitor length global-buffer command displays a report of recent high usage, low usage and update events for the global buffer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor length limit", "cmd": "show queue-monitor length limit [INTERFACES] number", "desc": "The show queue-monitor length limit command displays a report of recent over-threshold events for a range of interfaces or for all interfaces, limited by a specified number of records." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor length statistics", "cmd": "show queue-monitor length statistics", "desc": "The show queue-monitor length statistics command displays LANZ statistics for all interfaces, showing the traffic class and number of recorded congestion events for each interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor length status", "cmd": "show queue-monitor length status\nconfiguration mode) command), the command displays the monitoring mode per-linecard.\nqueue-monitor length notifying command), some linecards may still run LANZ in Polling Mode under the\nfollowing circumstances:\nthe card (here, the mode is shown as “polling due to SSO configured”).\nstatistic capabilities have been configured (here, the mode is shown as “polling due to counters", "desc": "The show queue-monitor length status command displays the current LANZ configuration for the switch and for each interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor length tx-latency", "cmd": "show queue-monitor length [INTERFACES][FACTOR] tx-latency", "desc": "The show queue-monitor length tx-latency command displays the latency data of recent LANZ events for a range of interfaces or for all interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show queue-monitor streaming clients", "cmd": "show queue-monitor streaming clients", "desc": "The show queue-monitor streaming clients command displays the number of presently connected clients through LANZ streaming, and also displays their host-names." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "tcpdump queue-monitor", "cmd": "tcpdump queue-monitor", "desc": "The tcpdump queue-monitor command exports congested traffic to a packet capture device or another tool for analysis, or directly to the switch CPU for inspection." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "Hardware Flow Tracking with IPFIX Export", "cmd": "Hardware Flow Tracking with IPFIX Export", "desc": "Hardware Flow Tracking uses match criteria to collect data from packets based on defined flow profiles." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "port 4739", "cmd": "port 4739", "desc": "Active interfaces: Et48 This command displays the hardware flow tracking IPFIX template." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "clear flow tracking sampled counters", "cmd": "clear flow tracking sampled counters [tracker tracker_name [exporter exporter_name]]", "desc": "The clear flow tracking sampled counters command clears the flow tracking counters for all trackers, a specified tracker, or a specified tracker and exporter." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "collector", "cmd": "collector {ipv4_address | ipv6_address} [port port_number]\nno collector {ipv4_address | ipv6_address} [port port_number]\ndefault collector {ipv4_address | ipv6_address} [ port port_number ]", "desc": "The collector command configures a collector to receive flow records from a specified exporter." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "QoS", "title": "dscp", "cmd": "dscp dscp_value\nno dscp dscp_value\ndefault dscp dscp_value", "desc": "The dscp command configures the Differentiated Services Code Point (DSCP) value for a specific exporter." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "exporter", "cmd": "exporter exporter_name\nno exporter exporter_name\ndefault exporter exporter_name", "desc": "The exporter command places the switch in sampled flow tracking exporter configuration mode for the specified exporter and creates the exporter if it does not yet exist." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "flow tracker sampled", "cmd": "flow tracker sampled tracker_name\nno flow tracker sampled tracker_name\ndefault flow tracker sampled tracker_name", "desc": "The flow tracker sampled command configures an interface to be part of a flow tracker." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "flow tracking sampled", "cmd": "flow tracking sampled\nno flow tracking sampled\ndefault flow tracking sampled", "desc": "The flow tracking sampled command places the switch in sampled flow tracking configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "format ipfix version", "cmd": "format ipfix version ipfix_version [max-packet-size max-packet-size value]\nno format ipfix version ipfix_version [max-packet-size]\ndefault format ipfix version ipfix_version [max-packet-size]", "desc": "The format ipfix version command configures the IPFIX version and maximum packet size for a specific exporter." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "local interface", "cmd": "local interface interface\nno local interface\ndefault local interface", "desc": "The local interface command configures the local source interface for the specific exporter." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "record export on inactive timeout", "cmd": "record export on inactive timeout timeout_value\nno record export on inactive timeout\ndefault record export on inactive timeout", "desc": "The record export on inactive timeout command configures the interval at which inactive flow records time out and are exported for a flow tracker." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "record export on interval", "cmd": "record export on interval interval_value\nno record export on interval\ndefault record export on interval", "desc": "The record export on interval command configures the interval at which active flow records are exported for a flow tracker." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sample", "cmd": "sample sample_rate\nno sample\ndefault sample", "desc": "The sample command enables the sample rate for a specific sampled flow tracker." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show flow tracking sampled", "cmd": "show flow tracking sampled [tracker tracker_name [exporter exporter_name]]", "desc": "The show flow tracking sampled tracker command displays information about the status of a specific tracker and the status of a specified exporter within that tracker." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show flow tracking sampled counters", "cmd": "show flow tracking sampled counters [tracker tracker_name [exporter exporter_name]]", "desc": "The show flow tracking sampled counters command displays information about the flow tracking counters of a specific tracker and the counters of a specified exporter within that tracker." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show flow tracking sampled flow-table", "cmd": "src-ip | src-port | tracker | vlan | vrf ]", "desc": "The show flow tracking sampled flow-table command displays information about the active flows maintained in the EOS." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show flow tracking sampled ipfix options-table", "cmd": "show flow tracking sampled ipfix options-table tracker [flow-key | flow-tracker | interface |\nvrf]", "desc": "The show flow tracking sampled ipfix options-table command displays information about the sampled IPFIX options table available." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show flow tracking sampled ipfix template", "cmd": "show flow tracking sampled ipfix template [data | options | tracker]", "desc": "The show flow tracking sampled ipfix template command displays information about the exported IPFIX data templates and options templates." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "template interval", "cmd": "template interval interval\nno template interval\ndefault template interval", "desc": "The template interval command configures the interval at which templates are exported for a specific exporter." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "tracker", "cmd": "tracker tracker_name\nno tracker tracker_name\ndefault tracker tracker_name", "desc": "The tracker command configures a sampled flow tracker for a device." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sFlow", "cmd": "sFlow", "desc": "This chapter describes Arista's implementation of sFlow, including configuration instructions and command descriptions." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sFlow Conceptual Overview", "cmd": "sFlow Conceptual Overview", "desc": "Sampled Flow Tracking Commands" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sFlow Technology", "cmd": "sFlow Technology", "desc": "Sampled Flow (sFlow) provides a multi-vendor sampling technology that continuously monitors application level traffic flow at wire speed simultaneously on all interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sFlow Agents", "cmd": "sFlow Agents", "desc": "The sFlow agent runs a software process as part of the network management software within an Arista switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sFlow Collector", "cmd": "sFlow Collector", "desc": "An sFlow collector runs software that analyzes and reports network traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sFlow Data", "cmd": "sFlow Data", "desc": "The sFlow Agent uses two forms of sampling: statistical packet-based sampling of switched flows and timebased sampling of network interface statistics." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sFlow and Mirroring", "cmd": "sFlow and Mirroring", "desc": "sFlow and Mirroring supports using the same interface for a mirroring session and sFlow at the same time." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sFlow Subinterfaces", "cmd": "sFlow Subinterfaces", "desc": "The sflow sample [input | output] subinterface command configures ifIndex values for subinterfaces on input and output ports to be included in the sFlow sample." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sFlow Commands", "cmd": "sFlow Commands", "desc": "Global Configuration Commands • sflow agent • sflow datagram • sflow destination • sflow extension bgp • sflow extension router • sflow extension switch • sflow extension vpls • sflow polling-interval" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "clear sflow counters", "cmd": "clear sflow counters", "desc": "The clear sflow counters command resets the global sFlow statistics, which includes the number of samples and sample pool." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow agent", "cmd": "sflow agent address [ipv4_address | ipv6_address]\nno sflow agent address\ndefault agent address", "desc": "The sflow agent command allows you to specify a specific type of address used by sFlow to identify the datagrams exported to the collector and uniquely identifies the origin of the datagrams." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow datagram", "cmd": "sflow datagram size maximum bytes", "desc": "The sflow datagram command configures the size of the sFlow datagram from 200 to 1500 bytes to help avoid fragmentation of the datagram." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "sflow destination", "cmd": "sflow destination dest_addr [UDP_PORT]\nno sflow destination dest_addr [UDP_PORT]\ndefault sflow destination dest_addr [UDP_PORT]", "desc": "The sflow destination command specifies an sFlow collector IPv4 or IPv6 address and, optionally, a UDP port (the default is 6343)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow enable", "cmd": "sflow enable\nno sflow enable\ndefault sflow enable", "desc": "The sflow enable command enables sFlow on the configuration mode interface." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "sflow extension bgp", "cmd": "sflow extension bgp\nno sflow extension bgp\ndefault sflow extension bgp\nBGP sFlow export behaves differently on different switch platforms as follows:\nuse software simulation to determine the egress port.\nfrom the first path of the ECMP route and a BGP next hop of 0.\nbut identifies the BGP next hop as 0.\nuse software simulation to determine the egress port.", "desc": "The sflow extension bgp command enables BGP export to sFlow." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "BGP", "title": "sflow extension evpn mpls", "cmd": "sflow evpn mpls", "desc": "The sflow extension evpn mpls command adds support for providing information related to the bridging domain in sFlow packet samples for traffic forwarded through Layer 2 EVPN MPLS." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow extension router", "cmd": "sflow extension router\nno sflow extension router\ndefault sflow extension router", "desc": "By default, the switch provides extended router information in sFlow packets, including the IP version and address of the next-hop router and source and destination mask lengths." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow extension switch", "cmd": "sflow extension switch\nno sflow extension switch\ndefault sflow extension switch", "desc": "By default, the switch provides extended switch information in sFlow packets, including source and destination VLANs and priorities." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "sflow extension switch vlan", "cmd": "sflow extension switch vlan forwarding\nno sflow extension switch vlan forwarding\ndefault sflow extension switch vlan forwarding", "desc": "The sflow extension switch vlan command in the Global Configuration Mode feature supports providing the VLAN from the bridged packet instead of decoding it from the Ethernet frame and reports the input and output VLAN fields." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow extension vpls", "cmd": "sflow extension vpls\nno sflow extension vpls\ndefault sflow extension vpls", "desc": "The sflow extension vpls command enables VPLS exporting to sFlow configuration." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow interface", "cmd": "sflow interface", "desc": "The sflow interface command enables the sampling of egress packets from an interface on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow polling-interval", "cmd": "sflow polling-interval interval_period\nno sflow polling-interval\ndefault sflow polling-interval", "desc": "The sflow polling-interval command specifies the counters polling interval." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow qos", "cmd": "sflow qos dscp dscp_value\nno sflow qos dscp\ndefault sflow qos dscp", "desc": "The sflow qos command configures Quality of Service (QoS) for sFlow datastreams by specifying the Differentiated Services Code Point (DSCP) value for sFlow export datagrams." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow run", "cmd": "sflow run\nno sflow run\ndefault sflow run", "desc": "The sflow run command globally enables sFlow on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow sample", "cmd": "sflow sample sample_rate\nno sflow sample\ndefault sflow sample", "desc": "The sflow sample command sets the packet sampling rate." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow sample input", "cmd": "sflow sample input [subinterface] [svi ifindex [member | svi]", "desc": "The sflow sample input command enables sFlow sampling on Switched Virtual Interfaces (SVIs) or subinterfaces, and explicitly targets the input direction." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow sample output interface", "cmd": "no sflow sample output interface", "desc": "By default, sFlow samples include information about the output interface of the sampled packet." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow sample rewrite", "cmd": "sflow sample rewrite dscp", "desc": "The sflow sample rewrite command configures sFlow to modify the Differentiated Services Code Point (DSCP) value of the sampled packet IP header as included in the sFlow datagram." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow sample truncate", "cmd": "sflow sample truncate size bytes", "desc": "The sflow sample truncate command configures the maximum length of the sampled packet header included in the sFlow datagram exported to a collector." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Routing", "title": "sflow sample vxlan", "cmd": "sflow sample vxlan header strip", "desc": "The sflow sample vxlan command explicitly configures sFlow to intelligently sample and parse VXLAN encapsulated traffic." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow source", "cmd": "sflow source source_addr\nno sflow source\ndefault sflow source", "desc": "The sflow source command specifies the IP address used in the Agent address filed of the IPv4 or IPv6 sFlow datagram that the switch sends to the collector." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "sflow source-interface", "cmd": "sflow source-interface INT_NAME\nno sflow source-interface\ndefault sflow source-interface", "desc": "The sflow source-interface command specifies the source IP address set to the IP address of the specified interfaces that the switch sends to the collector." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "sflow vrf", "cmd": "sflow vrf [vrf_name | default] [agent address ip_address] [destination", "desc": "The sflow vrf command configures sFlow parameters on Virtual Routing Forwarding instances, and enables sFlow functionality to be established specific VRFs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show sflow", "cmd": "show sflow [detail]", "desc": "The show sflow command displays configured sFlow parameters, operational status, and statistics." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show sflow interfaces", "cmd": "show sflow interfaces", "desc": "The show sflow interfaces command displays the interfaces with sFlow enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "SNMP", "cmd": "SNMP", "desc": "This chapter describes the Arista switch SNMP agent and contains these sections: • SNMP Introduction • SNMP Conceptual Overview • Configuring SNMP • SNMP Commands" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "SNMP Introduction", "cmd": "SNMP Introduction", "desc": "Arista Networks switches support many standard SNMP MIBs, making it easier to integrate these platforms into existing network management infrastructures." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "SNMP Conceptual Overview", "cmd": "SNMP Conceptual Overview", "desc": "Simple Network Management Protocol (SNMP) is a protocol that provides a standardized framework and a common language to monitor and manage network devices." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "SNMP Structure", "cmd": "SNMP Structure", "desc": "The SNMP framework has three parts: • SNMP manager: The SNMP manager controls and monitors network host activities and is typically part of a Network Management System (NMS)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "SNMP Notifications", "cmd": "SNMP Notifications", "desc": "SNMP notifications are messages, sent by the agent, informing of an event or a network condition." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "SNMP Versions", "cmd": "SNMP Versions", "desc": "Arista switches support the following SNMP versions: • SNMPv1: The Simple Network Management Protocol, defined in RFC 1157." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "SNMP Authentication and Encryption Methods", "cmd": "SNMP Authentication and Encryption Methods", "desc": "The following are the SNMP stronger Authentication and Encryption methods: • Authentication • MD5 • SHA-1 • SHA-224 • SHA-256 • SHA-384 • SHA-512 • Encryption • AES • DES • AES-192 • AES-256 Note: Use the following minimums when using the stronger SN…" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "octet", "cmd": "octet", "desc": "OctetString hexadecimal string opaque Opaque hexadecimal string string OctetString ascii string SET Requests For SET requests, script is passed three lines on stdin: the command (set), and the requested OID, and the" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "SNMP IP Address ACL Support", "cmd": "SNMP IP Address ACL Support", "desc": "SNMP IP address ACL support provides the ability to add access-lists to limit the source addresses that can be used to query the SNMP server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "Show Commands", "cmd": "show snmp ipv4 access-list summary", "desc": "Use the show snmp ipv4 access-list summary command to display an abbreviated output of an IPv4 access-list." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "SNMP Commands", "cmd": "SNMP Commands", "desc": "Global Configuration Commands • no snmp-server • snmp-server chassis-id • snmp-server community • snmp-server contact • snmp-server enable traps • snmp-server engineID local • snmp-server engineID remote" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "no snmp-server", "cmd": "no snmp-server\ndefault snmp-server", "desc": "The no snmp-server and default snmp-server commands disable Simple Network Management Protocol (SNMP) agent operation by removing all snmp-server commands from running-config." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp community", "cmd": "show snmp community", "desc": "The show snmp community command displays the Simple Network Management Protocol (SNMP) community access strings configured by the snmp-server community command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp engineID", "cmd": "show snmp engineID", "desc": "The show snmp engineID command displays the local SNMP engine information configured on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp group", "cmd": "show snmp group [GROUP_LIST]", "desc": "The show snmp group command shows the names of configured SNMP groups along with the security model, and view status of each group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp local-interface", "cmd": "show snmp local-interface", "desc": "The show snmp local-interface command displays the interface whose IP address is the source address for SNMP traps." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp mib", "cmd": "show snmp mib OBJECTS", "desc": "The show snmp mib command displays values associated with specified MIB object identifiers (OIDs) that are registered on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp notification", "cmd": "show snmp notification", "desc": "The show snmp notification command displays the SNMP trap generation information." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp notification host", "cmd": "show snmp notification host", "desc": "The show snmp notification host command displays information for Simple Network Management Protocol notification." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp notification | grep bridge", "cmd": "show snmp notification | grep bridge", "desc": "Use the show snmp notification | grep bridge command to display the enabled or disabled status of each trap type." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp user", "cmd": "show snmp user [USER_LIST]", "desc": "The show snmp user command shows information about Simple Network Management Protocol (SNMP) users." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp v2-mib chassis", "cmd": "show snmp v2-mib chassis", "desc": "The show snmp v2-mib chassis command displays the Simple Network Management Protocol (SNMP) server serial number or the chassis ID string configured by the snmp-server chassis-id command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp v2-mib contact", "cmd": "show snmp v2-mib contact", "desc": "The show snmp v2-mib contact command displays the Simple Network Management Protocol (SNMP) system contact string configured by the snmp-server contact command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp v2-mib location", "cmd": "show snmp v2-mib location", "desc": "The show snmp v2-mib location command displays the Simple Network Management Protocol (SNMP) system location string." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "show snmp view", "cmd": "show snmp view [VIEW_LIST]", "desc": "The show snmp view command displays the information of a Simple Network Management Protocol configuration and the associated MIB." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp trap link-change", "cmd": "snmp trap link-change\nno snmp trap link-change\ndefault snmp trap link-change", "desc": "The snmp trap link-change command enables Simple Network Management Protocol (SNMP) linkstatus trap generation on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server chassis-id", "cmd": "snmp-server chassis-id id_text\nno snmp-server chassis-id\ndefault snmp-server chassis-id", "desc": "The snmp-server chassis-id command configures the chassis ID string." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server community", "cmd": "snmp-server community string_text [MIB_VIEW][ACCESS][ACL_NAMES]\nno snmp-server community string_text\ndefault snmp-server community string_text", "desc": "The snmp-server community command configures the community string." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server contact", "cmd": "snmp-server contact contact_string\nno snmp-server contact\ndefault snmp-server contact", "desc": "The snmp-server contact command configures the system contact string." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server enable traps", "cmd": "snmp-server enable traps [trap_type]\nno snmp-server enable traps [trap_type]\ndefault snmp-server enable trap [trap_type]", "desc": "The snmp-server enable traps command enables Simple Network Management Protocol (SNMP) traps." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server engineID local", "cmd": "snmp-server engineID local engine_hex\nno snmp-server engineID local\ndefault snmp-server engineID", "desc": "The snmp-server engineID local command configures the name for the local Simple Network Management Protocol (SNMP) engine." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server engineID remote", "cmd": "snmp-server engineID remote engine_addr [PORT] engine_hex\nno snmp-server engineID remote engine_addr [PORT]\ndefault snmp-server engineID remote engine_addr [PORT]", "desc": "The snmp-server engineID remote command configures the name of a Simple Network Management Protocol (SNMP) engine located on a remote device." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server extension", "cmd": "snmp-server extension OID_space FILE_PATH [DURATION]", "desc": "The snmp-server extension command configures the execution of user supplied scripts to service portions of the OID space." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server group", "cmd": "snmp-server group group_name VERSION [CNTX][READ][WRITE][NOTIFY]\nno snmp-server group group_name VERSION\ndefault snmp-server group group_name VERSION", "desc": "The snmp-server group command configures a new Simple Network Management Protocol (SNMP) group or modifies an existing group." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server host", "cmd": "snmp-server host [ host_id | ip_address] informs [udp-port dest_port] refresh traps\nversion [ 1 | 2c | 3] vrf vrf_name\nno snmp-server host host_id ] informs [udp-port dest_port] refresh traps version\ndefault snmp-server host host_id", "desc": "The snmp-server host command configures an SNMP host to send SNMP traps and sets the community string if not previously configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server local-interface", "cmd": "snmp-server local-interface INTERFACE\nno snmp-server local-interface\ndefault snmp-server local-interface", "desc": "The snmp-server local-interface command specifies the interface where SNMP originates informs and traps." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server location", "cmd": "snmp-server location node_locate\nno snmp-server location\ndefault snmp-server location", "desc": "The snmp-server location command configures the system location string." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server qosmib counter-interval", "cmd": "snmp-server qosmib counter-interval timer_interval\nno snmp-server qosmib counter-interval\ndefault snmp-server qosmib counter-interval", "desc": "The snmp-server qosmib counter-interval command configures the interval (in seconds) after which the QoS counters are updated periodically." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server transport", "cmd": "snmp-server transport tcp\nno snmp-server transport tcp", "desc": "The snmp-server transport command in the Global Configuration Mode opens the TCP port for receiving SNMP requests." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server user", "cmd": "snmp-server user user_name group_name [AGENT] VERSION [ENGINE][SECURITY]\nno snmp-server user user_name group_name [AGENT] VERSION\ndefault snmp-server user user_name group_name [AGENT] VERSION", "desc": "The snmp-server user command adds a user to a Simple Network Management Protocol (SNMP) group or modifies an existing user's parameters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server view", "cmd": "snmp-server view view_name [family_name] INCLUSION\nno snmp-server view view_name [family_name]\ndefault snmp-server view view_name [family_name]", "desc": "The snmp-server view command defines a view." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "SNMP", "title": "snmp-server vrf", "cmd": "snmp-server vrf vrf_name\nno snmp-server vrf vrf_name\ndefault snmp-server vrf vrf_name", "desc": "The snmp-server vrf command enables SNMP in the specified VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "allowed-vlan", "cmd": "allowed-vlan [VLAN_LIST]\nno allowed-vlan\ndefault allowed-vlan vlan", "desc": "The allowed-vlan command specifies the VLANs that may be added when adding or moving a VM from the hypervisor connected to the session specified by the vmtracer mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "autovlan disable", "cmd": "autovlan disable\nno autovlan disable\ndefault autovlan disable", "desc": "Default VM Tracer session settings enable auto provisioning, which allows the dynamic assignment and pruning of VLANs when creating, deleting, or moving a VM attached to the ESX connected to the switch to a" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "password", "cmd": "password [ENCRYPTION] [password]", "desc": "The password command specifies the token that authorizes the username to the vCenter associated with the VM Tracer mode session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "password (vmtracer-VXLAN mode)", "cmd": "password [ENCRYPTION] password", "desc": "The password command specifies the token that authorizes the username on the NSX for vSphere® (NSXV) server located at the URL configured for the configuration mode VM Tracer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show vmtracer all", "cmd": "show vmtracer all", "desc": "The show vmtracer all command displays VM Tracer data for all switches with the vSphere scope." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show vmtracer session", "cmd": "show vmtracer session [SESSION_LIST]", "desc": "The show vmtracer session command displays vCenter and vShield connection information for a specified VM Tracer session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show vmtracer session vcenter", "cmd": "show vmtracer session session_name vcenter [INFO_LEVEL]", "desc": "The show vmtracer session vcenter command displays vCenter information for a specified VM Tracer session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "abcde", "cmd": "abcde", "desc": "https://vmware-vcenter5." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "sec", "cmd": "show vmtracer [INT_NAME] vm [VM_LIST]", "desc": "/api/2.0/vdn/scopes 0:00:00 ago /api/2.0/vdn/config/segments 10 days, 1:15:29 ago CURLE_COULDNT_RESOLVE_HOST - Couldn't resolve host The given remote host was not resolved. show vmtracer vm The show vmtracer vm command displays VMs interfaces (Vnics)…" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "vCenter2", "cmd": "vCenter2", "desc": "998" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "vCenter3", "cmd": "vCenter3", "desc": "998" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "vCenter4", "cmd": "vCenter4", "desc": "998" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show vmtracer vm detail", "cmd": "show vmtracer vm [VM_LIST] detail", "desc": "The show vmtracer vm detail command displays connection data for VMs interfaces (Vnics) accessible to VM Tracer enabled interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show vmtracer vnic counters", "cmd": "show vmtracer [ENTITY] vnic counters", "desc": "The show vmtracer interface vnic counters command displays input and output packet counts for VM interfaces (Vnics) active on the specified interface or VM." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vmtracer vxlan segment", "cmd": "show vmtracer segment ENTITY", "desc": "The show vmtracer vxlan segment command displays information about the VXLAN segments that are managed by the connected NSX for vSphere® (NSX-V)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "abcde switch>", "cmd": "abcde switch>", "desc": "• This command displays the resource pools available to the VXLANs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "show vmtracer vxlan vm", "cmd": "show vmtracer vxlan vm", "desc": "The show vmtracer vxlan vm command displays the VXLAN segments, their VTEP IP numbers, and their VM endpoints that are managed by the connected NSX for vSphere® (NSX-V)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "source-interface", "cmd": "source-interface [INTERFACE_NAME]\nno source-interface\ndefault source-interface", "desc": "The source-interface command allows you to connect to a remote vCenter endpoint by using the primary address of the interface as the source IP address." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "url (vmtracer mode)", "cmd": "url url_name", "desc": "The url command specifies the vCenter server location that is monitored by the session being edited by the current vmtracer mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "AAA", "title": "username", "cmd": "username name_string", "desc": "The username command identifies the switch account name on the vCenter server." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "vmtracer", "cmd": "vmtracer HOST_TYPE\nno vmtracer HOST_TYPE\ndefault vmtracer HOST_TYPE", "desc": "The vmtracer command enables vmtracer mode on the configuration mode interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "vmtracer session", "cmd": "vmtracer session name\nno vmtracer session name\ndefault vmtracer session name", "desc": "The vmtracer session command places the switch in the vmtracer mode for the specified session." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "vxlan", "cmd": "vxlan\nno vxlan\ndefault vxlan", "desc": "The vxlan command places the switch in the vmtracer-vxlan configuration mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "clear monitor hadoop burst-counters", "cmd": "clear monitor hadoop burst-counters [clusters]", "desc": "The clear monitor hadoop burst-counters command resets MapReduce Tracer burst counters for all jobs running on specified clusters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "clear monitor hadoop job-history", "cmd": "clear monitor hadoop job-history [clusters]", "desc": "The clear monitor hadoop job-history command resets the job history database for all specified clusters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "cluster (Monitor Hadoop)", "cmd": "cluster cluster_name\nno cluster cluster_name\ndefault cluster cluster_name", "desc": "The cluster command is a monitor-hadoop command that places the switch in the monitor-hadoopcluster mode for configuring and enabling a MapReduce Tracer monitor for a Hadoop cluster." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "interval (Monitor Hadoop Cluster)", "cmd": "interval period\nno interval\ndefault interval", "desc": "The interval command specifies the polling interval between queries to the Hadoop cluster JobTracker specifed by configuration mode statements." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "jobtracker (Monitor Hadoop Cluster)", "cmd": "jobtracker [location][port][user]\nno jobtracker[location][port][user]\ndefault jobtracker [location][port][user]", "desc": "The jobtracker command specifies JobTracker access parameters for the cluster monitored by configuration mode monitor statements." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor hadoop", "cmd": "monitor hadoop\nno monitor hadoop\ndefault monitor hadoop", "desc": "The monitor hadoop command places the switch in the Monitor-Hadoop Configuration Mode for configuring MapReduce Tracer monitors." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show agent oom scores", "cmd": "show agent [ agentName] oom scores", "desc": "The show agent oom scores command displays information for each agent if specified." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor hadoop", "cmd": "show monitor hadoop", "desc": "The show monitor hadoop command displays a list of jobs that are running on all monitored Hadoop clusters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor hadoop cluster all", "cmd": "show monitor hadoop cluster all", "desc": "The show monitor hadoop cluster all command displays configuration and connection information for all monitored Hadoop clusters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor hadoop cluster counters", "cmd": "show monitor hadoop cluster c_name counters", "desc": "The show monitor hadoop cluster counters command displays a list of jobs running on the specified Hadoop cluster and data consumption associated with these jobs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor hadoop cluster history", "cmd": "show monitor hadoop cluster c_name history", "desc": "The show monitor hadoop cluster history command displays all jobs that ran on the specified cluster." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor hadoop cluster history jobs", "cmd": "show monitor hadoop cluster c_name history jobs job_number", "desc": "The show monitor hadoop cluster history jobs command displays data about the specified job." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor hadoop cluster jobs", "cmd": "show monitor hadoop cluster c_name jobs", "desc": "The show monitor hadoop cluster jobs command displays a list of jobs that are running on the specified cluster." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor hadoop cluster jobs counter", "cmd": "show monitor hadoop cluster c_name [jobs job_number] counter", "desc": "The show monitor hadoop cluster jobs counter command displays data consumption and progress statistics for the specified job." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor hadoop cluster jobs ", "cmd": "show monitor hadoop cluster c_name [jobs job_number]", "desc": "The show monitor hadoop cluster jobsjob number command displays information about the specified job." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor hadoop cluster status", "cmd": "show monitor hadoop cluster c_name status", "desc": "The show monitor hadoop cluster status command displays configuration and connection information for the specified cluster." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor hadoop cluster tasktracker", "cmd": "show monitor hadoop cluster c_name tasktracker", "desc": "The show monitor hadoop cluster tasktracker command displays a list of TaskTrackers in the specified cluster." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor hadoop counters", "cmd": "show monitor hadoop counters", "desc": "The show monitor hadoop counters command displays byte counter data for all jobs running on clusters for which MapReduce Tracer is configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor hadoop history", "cmd": "show monitor hadoop history", "desc": "The show monitor hadoop history command displays jobs that ran on clusters for which MapReduce Tracer is configured." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor hadoop status", "cmd": "show monitor hadoop status", "desc": "The show monitor hadoop status command displays system status for MapReduce Tracer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor hadoop tasktracker all", "cmd": "show monitor hadoop tasktracker all", "desc": "The show monitor hadoop tasktracker all command displays a list of TaskTrackers that are on all monitored Hadoop clusters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor hadoop tasktracker all counters", "cmd": "show monitor hadoop tasktracker all counters", "desc": "The show monitor hadoop tasktracker all counters command displays byte counters for the TaskTrackers of all monitored Hadoop clusters." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor hadoop tasktracker counters", "cmd": "show monitor hadoop tasktracker NODES counters", "desc": "The show monitor hadoop tasktracker counters command displays a list of jobs running on the specified TaskTracker and output from byte counters associated with these jobs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor hadoop tasktracker jobs", "cmd": "show monitor hadoop tasktracker NODES jobs [CLUSTERS]", "desc": "The show monitor hadoop tasktracker jobs command displays data about the jobs that are running on TaskTrackers located on the specified node or accessed through the listed interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor hadoop tasktracker running-tasks", "cmd": "show monitor hadoop tasktracker NODES running-tasks [CLUSTERS][JOBS]", "desc": "The show monitor hadoop tasktracker running-tasks command displays progress and byte counts of tasks executed by TaskTrackers located on the specified node or accessed through the listed interfaces." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor hadoop tasktracker running-tasks cluster job task", "cmd": "show monitor hadoop tasktracker NODE [running-tasks cluster name][ job jnum ][task tnum]", "desc": "The show monitor hadoop tasktracker running-tasks cluster job task command displays detailed data for the specified task." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor hadoop tasktracker status", "cmd": "show monitor hadoop cluster c_name tasktracker status\nshow monitor hadoop tasktracker NODES status\nshow monitor hadoop tasktracker all status", "desc": "The show monitor hadoop tasktracker status command displays connection and activity information for the TaskTracker on the specified clusters or accessed through the specified interface." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor hadoop traffic burst", "cmd": "show monitor hadoop [CLUSTERS] traffic burst [NODE]", "desc": "The show monitor hadoop traffic burst command displays the largest data bursts for specified Hadoop cluster jobs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "show monitor system", "cmd": "show monitor system", "desc": "The show monitor system command displays information about the memory usage status of the system including when low-memory situations have led to Out-Of-Memory (OOM) events." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "tasktracker (Monitor Hadoop Cluster)", "cmd": "tasktracker http-port port_number\nno tasktracker http-port\ndefault tasktracker http-port", "desc": "The tasktracker command specifies the HTTP port for accessing TaskTrackers of the Hadoop cluster monitored through configuration mode statements." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "mA", "cmd": "mA", "desc": "35.00" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "performance-monitoring period", "cmd": "performance-monitoring period period\nno performance-monitoring period period", "desc": "The performance-monitoring period command configures Performance Monitoring Period across the system." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "performance-monitoring transceiver", "cmd": "performance-monitoring transceiver\nno performance-monitoring transceiver", "desc": "The performance-monitoring transceiver command enable Performance Monitoring on a per interface basis." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "performance-monitoring transceiver default", "cmd": "performance-monitoring transceiver default\nno performance-monitoring transceiver default", "desc": "The performance-monitoring transceiver default command enable Performance Monitoring on all interfaces across the system." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show interfaces transceiver dom", "cmd": "show interfaces interface transceiver dom", "desc": "The show interfaces transceiver dom command displays the Digital Optical Monitoring (DOM) parameters from the CLI." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces transceiver dom thresholds", "cmd": "show interfaces interface transceiver dom thresholds", "desc": "The show interfaces transceiver dom thresholds command displays the Digital Optical Monitoring (DOM) parameters and thresholds." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show interfaces transceiver performance-monitoring", "cmd": "show interfaces interface transceiver performance-monitoring", "desc": "The show interfaces transceiver performance-monitoring command displays the performance monitoring statistics from the CLI." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "show interfaces transceiver dom thresholds", "cmd": "show interfaces interface transceiver dom [thresholds] [unclipped]", "desc": "The show interfaces transceiver dom thresholds command displays the Digital Optical Monitoring (DOM) parameters and thresholds." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "Show Commands", "cmd": "show monitor security awake", "desc": "• The following CLI command display the status of the Monitor security Awake feature: switch# show monitor security awake [nucleus ]" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor security awake", "cmd": "monitor security awake\nno monitor security awake\ndefault monitor security awake", "desc": "When the monitor security awake command is enabled the FlowWatcher agent enables Hardware flow tracking with filter-based packet sampling, IP/IPv6 access lists, and mirroring features to receive the first" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor security awake", "cmd": "show monitor security awake [nucleus nucleus]", "desc": "The show monitor security awake command displays the status of the Monitor Security Awake feature on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor security awake counters", "cmd": "show monitor security awake counters [flows | ipfix | nucleus nucleus]", "desc": "The show monitor security awake counters command displays the various counters of the Monitor Security Awake feature on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "client host", "cmd": "monitor connectivity [clientclient_name | vrf vrf_name] host host_name", "desc": "The monitor connectivity client host command configures clients to accept connectivity probes from a host." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "client interval", "cmd": "client interval interval", "desc": "The client interval command configures the interval between probes on a client." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "client loss-threshold", "cmd": "client loss-threshold count probes", "desc": "The client loss-threshold command configures the sequential lost probe count threshold on a client." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "host description", "cmd": "host description description\nvrf description description", "desc": "The host description command configures a brief description of the host." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "host ip", "cmd": "host ip [ipv4_address | ipv6_address] [ hostname host_name resolution [ipv4 | ipv6]]", "desc": "The host ip command configures the endpoint for ICMP probing on the host." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "host tcp", "cmd": "host ip [ipv4_address | ipv6_address] tcp port port_number resolution [ipv4 | ipv6]]", "desc": "The host tcp command configures a TCP probe for Connectivity Monitoring." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "host url", "cmd": "host url url", "desc": "The host url command configures a URL for the host." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor connectivity", "cmd": "monitor connectivity", "desc": "The monitor connectivity command enters the Connectivity Monitor Configuration Mode on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor connectivity client", "cmd": "monitor connectivity client client_name", "desc": "The monitor connectivity client command enters the Connectivity Monitor Client Configuration Mode on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor connectivity description", "cmd": "host host_name description description\nvrf vrf_name description description", "desc": "The monitor connectivity description command configures a brief description of the host or VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor connectivity icmp echo qos dscp", "cmd": "icmp echo qos dscp dscp_value\nclient client_name icmp echo qos dscp dscp_value", "desc": "The monitor connectivity icmp echo qos dscp command configures DSCP bit on a host or client to classify and manage network traffic such as prioritizing packets when network congestion occurs." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor connectivity host", "cmd": "monitor connectivity host host_name", "desc": "The monitor connectivity host command enters the Connectivity Monitor Host Configuration Mode on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor connectivity icmp", "cmd": "icmp count ping_count\nclient client_name ] icmp count ping_count\nhosthost_name icmp count ping_count", "desc": "The monitor connectivity icmp command configures ICMP ping parameters globally, on a host, or a client." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor connectivity icmp threshold", "cmd": "monitor connectivity [ icmp | http | tcp] threshold latency value [milliseconds\nno monitor connectivity [ icmp | http | tcp] threshold latency", "desc": "The monitor connectivity icmp threshold command in the Connectivity Monitor Configuration Mode enables latency thresholds for a host or client ICMP, HTTP, or TCP probes." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "EtherChannel", "title": "monitor connectivity interface", "cmd": "interface set set_name [Dps | Ethernet | Fabric | InternalRecirc | Loopback |\nManagement | Port-Channel | Recirc-Channel | Tunnel | Vlan | Vxlan] interface\nvrf vrf_nameinterface set set_name [Dps | Ethernet | Fabric | InternalRecirc\nVxlan] interface", "desc": "The monitor connectivity interface command configures a collection of interfaces used as a source interface for probing." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor connectivity interval", "cmd": "interval count\nclient client_name interval count", "desc": "The monitor connectivity interval command configures the interval between probes globally or on a client." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor connectivity local-interfaces", "cmd": "local-interfaces interface_sets address-only default\nvrf vrf_name local-interfaces interface_sets address-only default", "desc": "The monitor connectivity local-interfaces command configures the default interface set for ICMP probing globally, on the host, or on a VRF." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NTP", "title": "monitor connectivity loss-threshold", "cmd": "loss-threshold countprobes\nclient client_name loss-threshold count probes", "desc": "The monitor connectivity loss-threshold command configures the sequential lost probe count threshold globally or on a client." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor connectivity name-server", "cmd": "name-server group group_name\nclientclient_name name-server group group_name", "desc": "The monitor connectivity name-server command configures the IP address of a DNS name server on a host or a client to resolve hostnames." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "monitor connectivity vrf", "cmd": "monitor connectivity vrf vrf_name", "desc": "The monitor connectivity vrf command to configure a specific VRF to use default probing for hosts." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "no icmp echo", "cmd": "no icmp echo disabled", "desc": "The no icmp echo command disables ICMP probes on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "show monitor connectivity", "cmd": "show monitor connectivity [host host_name]", "desc": "The show monitor connectivity command displays information about the Connectivity Monitor status and configuration on the switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "ms n/a", "cmd": "ms n/a", "desc": "Host: hostlocal Network Statistics: IP Address Local Interface Latency Jitter Packet Loss ---------------- --------------------- ------------- ------------- ----------127." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "ms 0.001 ms", "cmd": "ms 0.001 ms", "desc": "0% n/a" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "none", "cmd": "none", "desc": "Ethernet60/2" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "ms 0.002 ms", "cmd": "ms 0.002 ms", "desc": "0% n/a HTTP statistics: http://localhost Local Interface Response Time Probe Error --------------- ------------- ----------none" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area authentication", "cmd": "area authentication area area-id authentication [message-digest]\nno area area-id authentication [message-digest]\narea area-id authentication {key-chain chain-name | null}\nno area area-id authentication {key-chain | null}", "desc": "To enable authentication trailer for an Open Shortest Path First version 3 (OSPFv3) area, use the area the authentication trailer, use theno form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area default-cost", "cmd": "area area-id filter-list prefix prefix-list-name {in | out}\nno area area-id filter-list prefix prefix-list-name {in | out}", "desc": "To filter prefixes advertised in type 3 link-state advertisements (LSAs) between Open Shortest Path First (OSPF) areas of an Area Border Router (ABR), use the area filter-list command in router address family topology or router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area nssa", "cmd": "area nssa area area-id nssa [no-redistribution] [default-information-originate [metric]\nno area area-id nssa [no-redistribution] [default-information-originate [metric] [metric-type]]\narea nssa translate area area-id nssa translate type7 [always] [suppress-fa]\narea area-id range ipv6-prefix /prefix-length [{advertise | not-advertise}] [cost cost]\nno area area-id range ipv6-prefix /prefix-length [{advertise | not-advertise}] [cost cost]\narea area-id sham-link source-address destination-address [cost number] [ttl-security hops hop-count]\narea stub area area-id stub [no-summary]\nno area area-id stub [no-summary]", "desc": "To remove the transit, use the area no-transit form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "area virtual-link", "cmd": "area area-id virtual-link router-id authentication key-chain chain-name [hello-interval seconds]\nauthentication mode {deployment | normal}\nno authentication mode {deployment | normal}", "desc": "To specify authentication mode used in Open Shortest Path First version 3 (OSPFv3) , use the authentication defaultnormal authentication mode, use theno form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "auto-cost", "cmd": "auto-costcommand in router configuration mode. To assign cost based only on the interface type, use the no\nauto-cost auto-cost reference-bandwidth mbps\nno auto-cost reference-bandwidth", "desc": "To control how Open Shortest Path First (OSPF) calculates default metrics for the interface, use the form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "BFD Deterministic Offload", "cmd": "platform bfd offload-timer command in the global configuration mode. Set the Tx timer lower than, or equal\nplatform bfd offload-timer offload timer", "desc": "to the offload-timer limit, to host the BFD session in hardware, if resources are available." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "capability lls", "cmd": "packets and reenable OSPF nonstop forwarding (NSF) awareness, use the capability llscommand in router\ncapability lls\nno capability lls", "desc": "To enable the use of the Link-Local Signalling (LLS) data block in originated Open Shortest Path First (OSPF) configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "capability transit", "cmd": "transit command in router configuration mode. To disable OSPF area capability transit on all areas for a\ncapability transit\nno capability transit", "desc": "To reenable Open Shortest Path First (OSPF) area capability transit after it has been disabled, use the capability router process, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "capability vrf-lite", "cmd": "process is associated with the VPN routing and forwarding instance (VRF), use the capabilityvrf-lite command\ncapability vrf-lite\nno capability vrf-lite", "desc": "To suppress the provider edge (PE) specific checks on a router when the Open Shortest Path First (OSPF) in router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "capability vrf-lite (OSPFv3)", "cmd": "vrf-lite command in address family configuration mode. To restore the checks, use the no form of this\ncapability vrf-lite\nno capability vrf-lite", "desc": "To suppress the provider edge (PE)-specific checks on a router when the Open Shortest Path First version 3 (OSPFv3) process is associated with the VPN routing and forwarding (VRF) instance, use the capability command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear proximity ip ospf", "cmd": "clear proximity ip ospf [pid] {process | redistribution | counters [neighbor", "desc": "To clear redistribution based on the Open Shortest Path First (OSPF) routing process ID, use the clear proximity ip ospf command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear ip ospf force-spf", "cmd": "clear ip ospf [process-id] force-spf", "desc": "To start the shortest path first (SPF) algorithm without clearing the Open Shortest Path First (OSPF) database, use the clear ip ospf force-spf command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear ip ospf traffic", "cmd": "clear ip ospf [process-id] traffic [interface-type interface-number]", "desc": "To clear Open Shortest Path First (OSPF) traffic statistics, use the clear ip ospf traffic command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "clear ipv6 ospf traffic", "cmd": "clear ipv6 ospf traffic", "desc": "To reset counters and clear IPv6 OSPFv3 traffic statistics, use the clear ipv6 ospf traffic command privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "compatible rfc1583", "cmd": "rfc1583command in router configuration mode. To disable RFC 1583 compatibility, use the no form of this\ncompatible rfc1583\nno compatible rfc1583\ncompatible rfc1587\nno compatible rfc1587", "desc": "To replace RFC 3101 compatibility with RFC 1587 compatibility for route selection in not-so-stubby area (NSSA) Area Border Routers (ABRs), use the compatible rfc1587command in router configuration mode or address family configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "compatible rfc5243", "cmd": "compatible rfc5243\nno compatible rfc5243", "desc": "To optimize the database description (DBD) packet exchange between two OSPF neighbors, use the compatible rfc5243 in router configuration mode or address family configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "default-information originate (OSPF)", "cmd": "default-information originate [always] [metric metric-value] [metric-type type-value] [route-map\nno default-information originate [always] [metric metric-value] [metric-type type-value] [route-map", "desc": "To generate a default external route into an Open Shortest Path First (OSPF) routing domain, use the mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "default-metric (OSPF)", "cmd": "command in router address family topology or router configuration mode. To r eturn to the default state, use\ndefault-metric metric-value\nno default-metric metric-value", "desc": "to cause the current routing protocol to use the same metric value for all redistributed routes." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "discard-route", "cmd": "discard-route [external [distance]] [internal [distance]]\nno discard-route [external [distance]] [internal [distance]]", "desc": "To reinstall an external or internal discard route that was previously removed, use the discard-route command in router address family topology configuration or router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "distance ospf", "cmd": "distance ospf distance ospf {external dist1 | inter-area dist2 | intra-area dist3}\ndistance ospf distance ospf {external dist1 | inter-area dist2 | intra-area dist3}", "desc": "To define Open Shortest Path First (OSPF) route administrative distances based on route type, use the distance ospf command in router address family topology or router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "domain-id (OSPF)", "cmd": "domain-id {ip-address [secondary] | null | type type-value value hex-value [secondary]}\nno domain-id [{ip-address [secondary] | null | type type-value value hex-value", "desc": "To change the OSPF domain ID that is used during the redistribution of BGP VPNv4 routes to OSPF, use the command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "domain-id (OSPFv3)", "cmd": "domain-id type type-value value hex-value\nno domain-id type type-value value hex-value", "desc": "To configure the BGP/MPLS VPN domain ID, use the domain-id command in address-family configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "domain-tag", "cmd": "use the domain-tag command in router configuration mode. To reinstate the default tag value, use the no\ndomain-tag tag-value\nno domain-tag tag-value\ndomain-tag\nfast-reroute keep-all-paths\nno fast-reroute keep-all-paths", "desc": "To create a list of all the candidate repair paths considered when a per-prefix loop-free alternate (LFA) Fast Reroute (FRR) route is computed, use the fast-reroute keep-all-paths command in router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "fast-reroute per-prefix enable (OSPF)", "cmd": "fast-reroute per-prefix enable [area area-id] prefix-priority {high | low}\nno fast-reroute per-prefix enable [area area-id] prefix-priority {high | low}", "desc": "To configure a per-prefix loop-free alternate (LFA) Fast Reroute (FRR) path that redirects traffic to an router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "fast-reroute per-prefix remote-lfa maximum-cost", "cmd": "fast-reroute per-prefix remote-lfa [{area area-id}] maximum-cost distance\nno fast-reroute per-prefix remote-lfa [{area area-id}] maximum-cost distance", "desc": "To configure the maximum distance to the tunnel endpoint in a per-prefix loop-free alternate (LFA) fast reroute (FRR) path that redirects traffic to a remote LFA, use the fast-reroute per-prefix remote-lfa maximum-cost command in router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "fast-reroute per-prefix remote-lfa tunnel", "cmd": "fast-reroute per-prefix remote-lfa [{area area-id}] tunnel mpls-ldp\nno fast-reroute per-prefix remote-lfa [{area area-id}] tunnel mpls-ldp\nfast-reroute tie-break {broadcast-interface-disjoint | downstream | interface-disjoint | linecard-disjoint\nno fast-reroute tie-break {broadcast-interface-disjoint | downstream | interface-disjoint |\nlinecard-disjoint | node-protecting | primary-path | secondary-path | srlg} [required] {index\nattribute-priority | lowest-metric index attribute-priority}", "desc": "To configure the tiebreaking policy in selecting in a loop-free alternate (LFA) Fast Reroute (FRR) repair path, no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ignore lsa mospf", "cmd": "ignore lsa mospf ignore lsa mospf\nno ignore lsa mospf", "desc": "To suppress the sending of syslog messages when the router receives link-state advertisement (LSA) Type 6 Multicast OSPF ( MOSPF) packets, which are unsupported, use the ignore lsa mospfcommand in router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "interface-id snmp-if-index", "cmd": "interface-id snmp-if-index\nno interface-id snmp-if-index", "desc": "To configure Open Shortest Path First (OSPF) interfaces with Simple Network Management Protocol (SNMP) MIB-II interface Index (ifIndex) identification numbers, use the interface-id snmp-if-indexcommand in router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf area", "cmd": "ip ospf process-id area area-id [secondaries none]\nno ip ospf process-id area [secondaries none]", "desc": "To enable Open Shortest Path First version 2 (OSPFv2) on an interface, use the ip ospf area command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf authentication", "cmd": "ip ospf authentication [{key-chain name | message-digest | null}]", "desc": "To specify the authentication type for an interface, use the ip ospf authentication command in interface or of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf authentication-key", "cmd": "ip ospf authentication-key [{ 0 | 7 }] password", "desc": "to be able to exchange OSPF information." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf bfd", "cmd": "ip ospf bfd [disable]", "desc": "To enable Bidirectional Forwarding Detection (BFD) on a specific interface configured for Open Shortest Path First (OSPF), use the ip ospf bfdcommand in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf cost", "cmd": "ip ospf costinterface-cost\nno ip ospf cost interface-cost", "desc": "To explicitly specify the cost of sending a packet on an interface, use the ip ospf cost command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf database-filter all out", "cmd": "ip ospf database-filter all out [disable]", "desc": "To filter outgoing link-state advertisements (LSAs) to an Open Shortest Path First (OSPF) interface, use the restore the forwarding of LSAs to the interface, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf dead-interval", "cmd": "ip ospf dead-interval {seconds | minimal hello-multiplier multiplier}\nip ospf demand-circuit[disable] [ignore]", "desc": "to be closed when the topology is stable." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf fast-reroute per-prefix", "cmd": "ip ospf fast-reroute per-prefix {candidate | protection} [disable]", "desc": "To configure an interface as a protecting or a protected interface in a per-prefix loop-free alternative (LFA) repair path, use the ip ospf fast-reroute per-prefix command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf flood-reduction", "cmd": "ip ospf flood-reductionflood-reduction [disable]", "desc": "To suppress the unnecessary flooding of link-state advertisements (LSAs) in stable topologies, use the ip ospf command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf hello-interval", "cmd": "ospf hello-interval command in interface configuration mode. To return to the default time, use the no form\nip ospf hello-intervalseconds\nno ip ospf hello-interval", "desc": "To specify the interval between hello packets that the Cisco IOS software sends on the interface, use the ip of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf lls", "cmd": "ip ospf lls [disable]", "desc": "to interoperate on network segments where there are routers that do not properly handle LLS." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf message-digest-key md5", "cmd": "message-digest-key md5command in interface configuration mode. To remove an old MD5 key, use the no\nip ospf message-digest-keykey-idencryption-typemd5key\nno ipospfmessage-digest-keykey-id", "desc": "To enable Open Shortest Path First (OSPF) Message Digest 5 (MD5) authentication, use the ip ospf form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf mtu-ignore", "cmd": "ip ospf mtu-ignore[disable]", "desc": "To disable Open Shortest Path First (OSPF) maximum transmission unit (MTU) mismatch detection on mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf multi-area", "cmd": "the ip ospf multi-area command in interface configuration mode. To disable multiarea adjacency, use the\nip ospf multi-area multi-area-id\nno ip ospf multi-area multi-area-id", "desc": "To configure multiarea adjacency on a interface that is configured with Open Shortest Path First (OSPF), use no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf multi-area cost", "cmd": "ospf multi-area cost command in interface configuration mode. To reset the multiarea path cost to the default\nip ospf multi-area multi-area-id cost interface-cost\nno ip ospf multi-area multi-area-id cost interface-cost", "desc": "To specify the cost of sending a packet on an Open Shortest Path First (OSPF) multiarea interface, use the ip value, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf name-lookup", "cmd": "ip ospf name-lookup\nnoipospfname-lookup", "desc": "To disable this function, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf network", "cmd": "ip ospf network{broadcast | non-broadcast | {point-to-multipoint [non-broadcast] | point-to-point}}\nip ospf prefix-suppression [disable]", "desc": "To prevent Open Shortest Path First (OSPF) from advertising all IP prefixes that belong to a specific interface, allow the interface to inherit the IP prefix suppression setting from the router configuration, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf priority", "cmd": "ip ospf prioritynumber-value\nnoip ospf priority", "desc": "To set the router priority, which helps determine the designated router for this network, use the ip ospf priority command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf resync-timeout", "cmd": "resynchronization (oob-resync) has not taken place since the time a restart signal (Open Shortest Path First\nip ospf resync-timeout seconds\nno ip ospf resync-timeout\nip ospf resync-timeout\ninterface GigabitEthernet 6/0/0\nip ospf resync-timeout 50\nip ospf dead-interval\nip ospf hello-interval\ninterface, use the ip ospf retransmit-interval command in interface configuration mode. To return to the\nip ospf retransmit-intervalseconds\nno ip ospf retransmit-interval", "desc": "To specify the time between link-state advertisement (LSA) retransmissions for adjacencies belonging to the default value, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf shutdown", "cmd": "ip ospf shutdown [disable]", "desc": "To initiate an graceful shutdown of Open Shortest Path First (OSPF) protocol at the interface level, use the ip ospf shutdown command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf transmit-delay", "cmd": "transmit-delay command in interface configuration mode. To return to the default value, use the no form of\nip ospf transmit-delayseconds\nno ip ospf transmit-delay", "desc": "To set the estimated time required to send a link-state update packet on the interface, use the ip ospf this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ip ospf ttl-security", "cmd": "ip ospf ttl-security [{hops hop-count | disable}]", "desc": "To configure the Time-to-Live (TTL) security check feature on a specific interface, use the ip ospf of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "limit retransmissions", "cmd": "limit retransmission {dc | {max-retransmissions | disable} | [non-dc] | non-dc | {max-retransmissions\nno limit transmissions [{dc | non-dc}]\nlocal-rib-criteria [forwarding-address] [inter-area-summary] [nssa-translation]\nno local-rib-criteria [forwarding-address] [inter-area-summary] [nssa-translation]\nlog-adjacency-changes [detail]\nno log-adjacency-changes [detail]", "desc": "To configure the router to send a syslog message when an Open Shortest Path First (OSPF) neighbor goes up or down, use the log-adjacency-changes command in router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "max-lsa", "cmd": "max-lsa maximum-number [threshold-percentage] [warning-only] [ignore-time minutes] [ignore-count\ncount-number] [reset-time minutes]\nno max-lsa maximum-number [threshold-percentage] [warning-only] [ignore-time minutes]\nmax-metric router-lsa [external-lsa [max-metric-value]] [include-stub] [on-startup {seconds |\nwait-for-bgp}] [summary-lsa [max-metric-value]]\nno max-metric router-lsa [external-lsa [max-metric-value]] [include-stub] [on-startup {seconds |\nwait-for-bgp}] [summary-lsa [max-metric-value]]", "desc": "to an OSPF network but not want real traffic flowing through the router if there are better alternate paths." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "max-metric router-lsa", "cmd": "max-metric router-lsa", "desc": "Commands Starting with 'M'" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "neighbor (OSPF)", "cmd": "neighbor ip-address [priority number] [poll-interval seconds] [cost number] [database-filter all]\nno neighbor ip-address [priority number] [poll-interval seconds] [cost number] [database-filter\nneighbor ip-address database-filter allout [cost metric]", "desc": "to the neighbor, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "network area", "cmd": "interfaces, use the network area command in router configuration mode. To disable OSPF routing for interfaces\nnetwork ip-address wildcard-mask area area-id\nno network ip-address wildcard-mask area area-id\nyou intend to associate areas with IP subnets, you can specify a subnet address as the value of the\nareacommand. If the network areacommand covers only the secondary address, it will not enable OSPF", "desc": "to define one or multiple interfaces to be associated with a specific OSPF area using a single command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "nsf (OSPF)", "cmd": "nsf [enforce global]\nno nsf [enforce global]", "desc": "To configure Cisco nonstop forwarding (NSF) operations for Open Shortest Path First (OSPF), use the nsf command in router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "nsf cisco", "cmd": "nsf cisco [{enforce global | helper [disable]}]\nno nsf cisco [{enforce global | helper disable}]", "desc": "To disable Cisco nonstop forwarding (NSF) helper mode on a Cisco router that is running Open Shortest Path First (OSPF), use the nsf cisco helper disablecommand in router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "nsf cisco helper disable", "cmd": "nsf cisco helper disable", "desc": "Commands Starting with 'N'" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "nsf ietf", "cmd": "nsf ietf [{restart-interval seconds | helper [{disable | strict-lsa-checking}]}]\nno nsf ietf [{restart-interval | helper [{disable | strict-lsa-checking}]}]", "desc": "to the default, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "nsf ietf helper disable", "cmd": "is running Open Shortest Path First (OSPF), use the nsf ietf helper disablecommand in router configuration\nnsf ietf helper disable\nno nsf ietf helper disable", "desc": "To disable Internet Engineering Task Force (IETF) nonstop forwarding (NSF) helper mode on a router that mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "nsf ietf helper strict-lsa-checking", "cmd": "process, use the nsf ietf helper strict-lsa-checkingcommand in router configuration mode. To disable strict\nnsf ietf helper strict-lsa-checking\nno nsf ietf helper strict-lsa-checking\nstrict-lsa-checking command. However, strict LSA checking will not become effective until the router\nbecomes a helper router during an IETF graceful restart process. With strict LSA checking enabled, the helper\nthat would be flooded to the restarting router or if there is a changed LSA on the retransmission list of the\nthe nsrcommand in router configuration mode. To disable NSR and return to the default, use the no form of\nnsr\nno nsr", "desc": "To enable nonstop routing (NSR) operations on a router that is running Open Shortest Path First (OSPF), use this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "Router configuration (config-router)", "cmd": "ospfv3 [pid] [ipv4|ipv6] authentication {key-chain chain-name | null}\nno ospfv3 [pid] [ipv4|ipv6] authentication {key-chain | null}", "desc": "To specify the cryptographic authentication keys for an Open Shortest Path First version 3 (OSPFv3) instance, chain, use theno form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "router ospf", "cmd": "router ospf process-id [vrf vrf-name]\nno router ospf process-id [vrf vrf-name]", "desc": "To configure an Open Shortest Path First (OSPF) routing process, use the router ospf command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "router-id", "cmd": "router-id ip-address\nno router-id ip-address", "desc": "To use a fixed router ID, use the router-id command in router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ospfv3 multi-area", "cmd": "ospfv3 multi-area multi-area-id\nno ospfv3 multi-area multi-area-id", "desc": "To configure multiarea adjacency on an interface that is configured with Open Shortest Path First version 3 (OSPFv3), use the ospfv3 multi-area command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ospfv3 multi-area cost", "cmd": "use the ospfv3 multi-area cost command in interface configuration mode. To reset the multiarea path cost\nospfv3 multi-area multi-area-id cost interface-cost\nno ospfv3 multi-area multi-area-id cost interface-cost", "desc": "to 65535." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "prefix-suppression", "cmd": "with loopbacks, secondary IP addresses, and passive interfaces for a specific OSPF process, use the\nprefix-suppression command in router configuration mode. To advertise all IP prefixes, use the no form of\nprefix-suppression\nno prefix-suppression", "desc": "To prevent Open Shortest Path First (OSPF) from advertising all IP prefixes except prefixes that are associated this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "process-min-time percent", "cmd": "redistribute maximum-prefix maximum [percentage] [{warning-only | withdraw}]", "desc": "To limit the number of prefixes redistributed into Open Shortest Path First (OSPF) or to generate a warning command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf", "cmd": "show ip ospf [process-id]", "desc": "To display general information about Open Shortest Path First (OSPF) routing processes, use the showipospf command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf border-routers", "cmd": "and Autonomous System Boundary Router (ASBR), use the showipospfborder-routers command in privileged\nshow ip ospf border-routers", "desc": "To display the internal Open Shortest Path First (OSPF) routing table entries to an Area Border Router (ABR) EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf database", "cmd": "show ip ospf [process-id area-id] database\nshow ip ospf [process-id area-id] database [adv-router [ip-address]]\nshow ip ospf [process-id area-id] database [asbr-summary] [link-state-id]\nshow ip ospf [process-id area-id] database [asbr-summary] [link-state-id] [adv-router [ip-address]]\nshow ip ospf [process-id area-id] database [asbr-summary] [link-state-id] [self-originate]\nshow ip ospf [process-id area-id] database [database-summary]\nshow ip ospf [process-id] database [external] [link-state-id]\nshow ip ospf [process-id] database [external] [link-state-id] [adv-router [ip-address]]\nshow ip ospf [process-id area-id] database [external] [link-state-id] [self-originate] [link-state-id]\nshow ip ospf [process-id area-id] database [network] [link-state-id]\nshow ip ospf [process-id area-id] database [network] [link-state-id] [adv-router [ip-address]]\nshow ip ospf [process-id area-id] database [network] [link-state-id] [self-originate] [link-state-id]\nshow ip ospf [process-id area-id] database [nssa-external] [link-state-id]\nshow ip ospf [process-id area-id] database [nssa-external] [link-state-id] [adv-router [ip-address]]\nshow ip ospf [process-id area-id] database [nssa-external] [link-state-id] [self-originate] [link-state-id]\nshow ip ospf [process-id area-id] database [router] [link-state-id]\nshow ip ospf [process-id area-id] database [router] [adv-router [ip-address]]\nshow ip ospf [process-id area-id] database [router] [self-originate] [link-state-id]\nshow ip ospf [process-id area-id] database [self-originate] [link-state-id]\nshow ip ospf [process-id area-id] database [summary] [link-state-id]\nshow ip ospf [process-id area-id] database [summary] [link-state-id] [adv-router [ip-address]]\nshow ip ospf [process-id area-id] database [summary] [link-state-id] [self-originate] [link-state-id]", "desc": "To display lists of information related to the Open Shortest Path First (OSPF) database for a specific router, use the showipospfdatabase command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf events", "cmd": "show ip ospf events [generic] [interface] [lsa] [neighbor] [reverse] [rib] [spf]", "desc": "To display the IP Open Shortest Path First (OSPF) events information, use the show ip ospf events command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf fast-reroute", "cmd": "show ip ospf [{process-id}] fast-reroute [{prefix-summary | remote-lfa tunnels}]", "desc": "To display information for an Open Shortest Path First (OSPF) per-prefix loop-free alternate (LFA) fast reroute (FRR) configuration, use the show ip ospf fast-reroute command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf flood-list", "cmd": "show ip ospf flood-list show ip ospf flood-list interface-type interface-number", "desc": "To display a list of Open Shortest Path First (OSPF) link-state advertisements (LSAs) waiting to be flooded over an interface, use the showipospfflood-listcommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf interface", "cmd": "show ip [ospf] [process-id] interface [type number] [brief] [multicast] [topology {topology-name", "desc": "To display interface information related to Open Shortest Path First (OSPF), use the show ip ospf interface command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "no", "cmd": "no", "desc": "Commands Starting with 'S'" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf max-metric", "cmd": "show ip ospf max-metric [{multicast topology | topology}] [{topology-name | base}]", "desc": "To display IP Open Shortest Path First (OSPF) max-metric origination information, use the show ip ospf max-metric command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf multi–area", "cmd": "show ip ospf process-id multi-area", "desc": "To display interface information about Open Shortest Path First (OSPF) multiarea adjacency, use the show ip ospf multi-area command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf neighbor", "cmd": "show ip ospf neighbor [interface-type interface-number] [neighbor-id] [detail] [fast-reroute]", "desc": "To display Open Shortest Path First (OSPF) neighbor information on a per-interface basis, use the showipospfneighbor command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "maximum", "cmd": "maximum", "desc": "Commands Starting with 'S'" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf nsf", "cmd": "show ip ospf nsf", "desc": "To display IP Open Shortest Path First (OSPF) nonstop forwarding (NSF) state information, use the show ip ospf nsf command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf nsr", "cmd": "show ip ospf [process-id] nsr [{[objects] | [statistics]}]", "desc": "To display IP Open Shortest Path First (OSPF) nonstop routing (NSR) status information, use the show ip ospf nsr command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf request-list", "cmd": "show ip ospf request-list [neighbor] [interface] [interface-neighbor]", "desc": "To display a list of all link-state advertisements (LSAs) requested by a router, use the showipospfrequest-listcommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf retransmission-list", "cmd": "show ip ospf retransmission-list [neighbor] [interface] [interface-neighbor]", "desc": "To display a list of all link-state advertisements (LSAs) waiting to be re-sent, use the showipospfretransmission-listcommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf rib", "cmd": "show ip ospf process-id rib [redistribution] [network-prefix] [network-mask] [detail]", "desc": "To display information for the Open Shortest Path First (OSPF) local Routing Information Base (RIB) or locally redistributed routes, use the showipospfribcommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf sham-links", "cmd": "show ip ospf sham-links", "desc": "To display information about all sham-links configured for a provider edge (PE) router in the Virtual Private Network (VPN) backbone, use the show ip ospf sham-links command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf statistics", "cmd": "show ip ospf statistics [detail]", "desc": "To display Open Shortest Path First (OSPF) shortest path first (SPF) calculation statistics, use the showipospfstatisticscommand in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf summary-address", "cmd": "show ip ospf [process-id] summary-address", "desc": "To display a list of all summary address redistribution information configured under an Open Shortest Path First (OSPF) process, use the showipospfsummary-addresscommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf timers rate-limit", "cmd": "show ip ospf timers rate-limit", "desc": "To display all of the link-state advertisements (LSAs) in the rate limit queue, use the showipospftimersrate-limitcommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ip ospf traffic", "cmd": "show ip ospf [process-id] traffic [interface-type interface-number]", "desc": "To display parameters and the current state of Open Shortest Path First (OSPF) virtual links, use the showipospfvirtual-links command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ipv6 ospf", "cmd": "show ipv6 ospf [process-id] [area-id] [rate-limit]", "desc": "To display general information about Open Shortest Path First ( OSPF) routing processes, use the show ipv6 ospf command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ipv6 ospf traffic", "cmd": "show ipv6 ospf [process-id] traffic [interface-type interface-number]", "desc": "To ensure compatibility with the showiptraffic command, only checksum errors are displayed." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ospfv3 multi-area", "cmd": "show ospfv3 multi-area", "desc": "To display information about the Open Shortest Path First version 3 (OSPFv3) multiarea interfaces, use the show ospfv3 multi-area command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show ospfv3 sham-links", "cmd": "show ospfv3 [process-id] [address-family] [vrf {vrf-name | *}] sham-links", "desc": "To display parameters and the current state of Open Shortest Path First version 3 (OSPFv3) sham links, use the show ospfv3 sham-links command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "show tech-support ospf", "cmd": "show tech-support ospf [vrf vrf-instance-name][process-id][detail]", "desc": "To run show s that display OSPF information that is useful to Cisco Technical Support personnel in resolving issues, use the show tech-support ospf command in the privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "shutdown (router OSPF)", "cmd": "use the shutdown command in router configuration mode. To restart the OSPF protocol, use the noform of\nshutdown\nno shutdown", "desc": "To initiate a graceful shutdown of the Open Shortest Path First (OSPF) protocol under the current instance, this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "snmp-server enable traps ospf", "cmd": "s of the following s:", "desc": "Commands Starting with 'S'" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "snmp-server enable traps ospf cisco-specific errors", "cmd": "config-error\nenter the snmp-server enable traps ospf cisco-specific errorscommand in global configuration mode without\nnonvirtual interfaces:\nsnmp-server enable traps ospf\nnonvirtual interface mismatch errors, use the snmp-server enable traps ospf cisco-specific errors\nconfig-errorcommand in global configuration mode. To disable OSPF nonvirtual interface mismatch error\nsnmp-server enable traps ospf cisco-specific errors config-error\nno snmp-server enable traps ospf cisco-specific errors config-error\ncisco-specific errors config-error command in global configuration mode. The snmp-server enable traps\nospf cisco-specific errors config-error command enables the cospfConfigError trap, so that both traps can\nbe generated at the same place and maintain consistency with a similar case for configuration errors across\nsnmp-server enable traps ospf cisco-specific errors config-error\nsnmp-server enable traps ospf cisco-specific errors Enables SNMP notifications for OSPF sham-link\nshamlink\nsnmp-server enable traps ospf cisco-specific\nretransmit\ncisco-specific errors config-error command in global configuration mode. The snmp-server enable traps\nospf cisco-specific errors config-error command enables the cospfConfigError trap, so that both traps can\nbe generated at the same place and maintain consistency with a similar case for configuration errors across", "desc": "To enable the cospfShamLinkConfigError trap, you must first enter the snmp-server enable traps ospf virtual links." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "snmp-server enable traps ospf cisco-specific retransmit", "cmd": "packets", "desc": "Commands Starting with 'S'" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "snmp-server enable traps ospf cisco-specific state-change", "cmd": "nssa-trans-change\nsnmp-server enable traps ospf cisco-specific errors Enables SNMP notifications for OSPF nonvirtual\nconfig-error\nsnmp-server enable traps ospf cisco-specific errors Enables SNMP notifications for OSPF sham-link\nshamlink\nsnmp-server enable traps ospf cisco-specific\nretransmit\nconfig-error\nwhen a packet has been received in a nonvirtual interface from a neighbor router\nwhose configuration parameters conflict with the configuration parameters of\nvirt-authentication-failure (Optional) Enables only the ospfVirtIfFailure trap. Allows SNMP notifications\nrouter whose authentication key or authentication type conflicts with the\nvirt-bad-packet\nnotifications to be sent when an OSPF packet that has not been parsed has been\nvirt-config-error\nnotifications when a packet has been received in a virtual interface from a\nneighbor router whose configuration parameters conflict with the configuration", "desc": "to be sent when a packet has been received on a virtual interface from a neighbor authentication key or authentication type of this router." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "snmp-server enable traps ospf lsa", "cmd": "lsa-maxage\nby the router as a result of a topology change:\nsnmp-server enable traps ospf lsa", "desc": "To enable the traps that are defined by the CISCO-OSPF-TRAP-MIB for opaque LSAs, enter the snmp-server enable traps ospf cisco-specific lsacommand in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "snmp-server enable traps ospf retransmit", "cmd": "snmp-server enable traps ospfv3 errors [bad-packet] [config-error] [virt-bad-packet]\nno snmp-server enable traps ospfv3 errors [bad-packet] [config-error] [virt-bad-packet]", "desc": "To disable SNMP notifications for OSPFv3 errors, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "snmp-server snmp traps ospfv3 rate-limit", "cmd": "number of seconds, use the snmp-server enable traps ospfv3 rate-limit command in global configuration\nsnmp-server enable traps ospfv3 rate-limit seconds trap-number\nno snmp-server enable traps ospfv3 rate-limit", "desc": "To limit the number of Open Shortest Path First Version 3 (OSPFv3) traps that are sent during a specified mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "snmp-server snmp traps ospfv3 state-change", "cmd": "snmp-server enable traps ospfv3 state-change [if-state-change]\nsummary-address summary-address {ip-address mask | prefix mask} [not-advertise] [tag\ntag] [nssa-only]\nno summary-address {ip-address mask | prefix mask} [not-advertise] [tag tag] [nssa-only]", "desc": "to OSPF only." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "timers lsa arrival", "cmd": "timers lsa arrival milliseconds\nno timers lsa arrival", "desc": "To restore the default value, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "timers pacing flood", "cmd": "timers pacing flood milliseconds\nno timers pacing flood\nnot change the packet pacing timers unless all other options to meet OSPF packet flooding requirements have\ncollected into a group and refreshed, checksummed, or aged, use the timers pacing lsa-groupcommandin\ntimers pacing lsa-group seconds\nno timers pacing lsa-group", "desc": "To change th e interval at which Open Shortest Path First ( OSPF) link-state advertisements (LSAs) are router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "timers pacing retransmission", "cmd": "command in router configuration mode. To restore the default retransmission packet pacing value, use the no\ntimers pacing retransmission milliseconds\nno timers pacing retransmission", "desc": "To configure link-state adv ertisement (LSA) retransmission packet pacing, use the timers pacing retransmission form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "timers throttle lsa all", "cmd": "timers throttle lsa all start-interval hold-interval max-interval\nno timers throttle lsa all", "desc": "to 600,000 milliseconds." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "timers throttle spf", "cmd": "command in the appropriate configuration mode. To turn off OSPF SPF throttling, use the no form of this\ntimers throttle spf spf-start spf-hold spf-max-wait\nno timers throttle spf spf-start spf-hold spf-max-wait", "desc": "To turn on Open Shortest Path First ( OSPF) shortest path first (SPF) throttling, use the timers throttle spf command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "OSPF", "title": "ttl-security all-interfaces", "cmd": "ttl-security all-interfaces [hops hop-count]", "desc": "To enable Time-to-Live (TTL) security check on all OSPF interfaces, use the ttl-security this command." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "switch#", "cmd": "switch#", "desc": "Arista EOS — System" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "switch(config-if-Vl101)#", "cmd": "switch(config-if-Vl101)#", "desc": "• These commands configure Ethernet interface 2 to translate the local source address 10." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "NAT", "title": "switch# show ip nat pool p2", "cmd": "switch# show ip nat pool p2", "desc": "Pool StartIp p2" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MACsec Overview", "cmd": "MACsec Overview", "desc": "Media Access Control Security (MACsec) is an industry-standard encryption mechanism that protects all traffic flowing on Ethernet links." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MACsec Terminology", "cmd": "MACsec Terminology", "desc": "MACsec Key Agreement Protocol (MKA) - provides the key agreement protocol for discovering MACsec peers and negotiating keys between MACsec peers (IEEE 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MACsec Limitations", "cmd": "MACsec Limitations", "desc": "The following are the limitations of MACsec: • EOS supports MACsec only on point-to-point links unless static SAK is enabled." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MACsec Licensing", "cmd": "MACsec Licensing", "desc": "MACsec encryption is an EOS-licensed feature that requires a valid MACsec license on a switch." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MACsec in FIPS mode", "cmd": "MACsec in FIPS mode", "desc": "Federal Information Processing Standards (FIPS) are a set of standards defined by the United States federal government related to data processing in computer systems by non-military government agencies" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Static", "title": "MACsec Using Static Secure Association Key", "cmd": "MACsec Using Static Secure Association Key", "desc": "MAC security uses the MACsec Key Agreement (MKA) protocol to negotiate between peers using keys (CAKs and CKNs) which are either pre-shared or derived from an 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MACsec Key Retirement Immediate", "cmd": "MACsec Key Retirement Immediate", "desc": "The MACsec configures two keys for MKA negotiation: Primary and Fallback (as a backup)." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MACsec Key Retirement Immediate Configuration", "cmd": "MACsec Key Retirement Immediate Configuration", "desc": "The show dot1x supplicant command is configured in the mac security profile mode." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MACsec EAP-FAST Support", "cmd": "MACsec EAP-FAST Support", "desc": "The Media Access Control Security (MACsec) with static keys feature supports dynamic Mac Security keys." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "MACsec Proxy For VXLAN", "cmd": "MACsec Proxy For VXLAN", "desc": "The MACsec Proxy for VXLAN feature enables the MACsec service over VXLAN." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MACsec Fallback to Unprotected Traffic", "cmd": "MACsec Fallback to Unprotected Traffic", "desc": "When MACsec is enabled on an interface, it tries to establish MACsec Key Agreement ( MKA ) session(s) with its peer." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MACsec Fallback to Unprotected Traffic Feature Interaction", "cmd": "MACsec Fallback to Unprotected Traffic Feature Interaction", "desc": "This feature interacts with other related features in the following way: • MACsec EAP-FAST Support: The feature configuration has no effect if using dynamic MAC Security keys (derived from 802." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MACsec Commands", "cmd": "MACsec Commands", "desc": "MACsec Configuration Commands • an (MACsec) • cipher • entropy source hardware • identifier (MACsec) • key (MACsec) • key retirement immediate • l2-protocol • license (Global Mode) • license (MACsec) • mac security" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MAC Address Format", "cmd": "MAC Address Format", "desc": "Figure 11-4: MAC Address Format • Unicast address: the I/G bit is 0: 1234." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MAC Address Table", "cmd": "MAC Address Table", "desc": "The switch maintains a MAC address table for switching frames efficiently between ports." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MAC Address Table Configuration", "cmd": "MAC Address Table Configuration", "desc": "These sections describe MAC address table configuration tasks." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "VLAN", "title": "MAC Address Learning Per-VLAN", "cmd": "MAC Address Learning Per-VLAN", "desc": "MAC address learning per-VLAN enables or disables MAC address learning per-VLAN instead of per-port." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "switch(config)#", "cmd": "switch(config)#", "desc": "dest" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "switch(config-nexthop-group-NH-1)#", "cmd": "switch(config-nexthop-group-NH-1)#", "desc": "Arista EOS — System" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Interfaces", "title": "switch# show arp agent ipv6 cache dynamic capacity interface ethernet 1", "cmd": "switch# show arp agent ipv6 cache dynamic capacity interface ethernet 1", "desc": "Ethernet1 Link-local excluded Cache Entry Kind: dynamic Capacity: 250 Entries: 5 1::1 1::2 1::3 1::4 1::5" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "switch>", "cmd": "switch>", "desc": "Applying a Next-hop Group to a Static Route The ip route nexthop-group associates a next-hop group with a specified destination address and configures the encapsulation method for packets tunneled to that address." }, { "os": "eos", "role": "router", "vendor": "Arista", "cat": "Routing", "title": "switch# show isis ti-lfa path 10.10.10.1/32", "cmd": "switch# show isis ti-lfa path 10.10.10.1/32", "desc": "TI-LFA paths for IPv4 address family Topo-id: Level-1 Destination Constraint Path --------------- ---------------------------- -------------10." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "switch(config-router-msdp-peer-10.1.1.14)#", "cmd": "switch(config-router-msdp-peer-10.1.1.14)#", "desc": "Arista EOS — System" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Security", "title": "MAC Address Table VXLAN Support", "cmd": "MAC Address Table VXLAN Support", "desc": "MAC address table entries correlate MAC addresses with the port upon which packets arrive." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MAC Address Learning", "cmd": "MAC Address Learning", "desc": "MAC address learning on the local interface of a VTEP is flow-based learning." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "MAC Mobility", "cmd": "MAC Mobility", "desc": "A common scenario in a data center environment is Virtual Machines (VMs) moving between physical servers, for maintenance or performance reasons." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "MAC Address Damping", "cmd": "MAC Address Damping", "desc": "In addition to MAC mobility, EVPN defines a protection mechanism to detect and prevent MAC routes from flapping between VTEPs, which can occur during network instability or when hosts have been misconfigured" }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "System", "title": "switch(config)# monitor session sess2 source et2 rx ip access-group dIPv6", "cmd": "switch(config)# monitor session sess2 source et2 rx ip access-group dIPv6", "desc": "switch(config)# monitor session sess2 destination tunnel mode gre source 3." }, { "os": "eos", "role": "switch", "vendor": "Arista", "cat": "Troubleshooting", "title": "switch(config)# show monitor session", "cmd": "switch(config)# show monitor session", "desc": "Session sess1 -----------------------Source Ports: Rx Only: Et1(IP ACL: dIPv4) Destination Ports: Gre1 : status active source" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "restart", "cmd": "restart\nrestart (JDM)\nrestart (Junos OS Evolved)\nrestart chassis-control", "desc": "Juniper Junos — System" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "monitor ethernet delaymeasurement", "cmd": "monitor ethernet delaymeasurement\nmonitor ethernet lossmeasurement\nmonitor ethernet synthetic-lossmeasurement\nmonitor interface error\nmonitor label-switched-path\nmonitor list\nmonitor list (JDM)\nmonitor mpls delay rsvp\nmonitor pfe traffic interface\nmonitor security flow file\nmonitor security flow start\nmonitor security flow stop\nmonitor security packet-drop\nmonitor start\nmonitor start (JDM)\nmonitor stop (JDM)\nmonitor traffic", "desc": "Juniper Junos — System" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "AAA", "title": "test aaa authd-lite user", "cmd": "test aaa authd-lite user\ntest aaa ppp user\ntest access profile\ntest access radius-server\ntest interface restart-autonegotiation\ntest msdp\ntest policy\ntest security utm anti-spam\ntest security utm enhanced-webfiltering url-check\ntest security utm web-filtering profile\ntest services l2tp tunnel", "desc": "Juniper Junos — System" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "MPLS", "title": "ping", "cmd": "ping\nping fabric multicast-flow\nping mpls l2circuit\nping mpls l2vpn\nping mpls l3vpn\nping mpls ldp\nping mpls lsp-end-point\nping mpls segment routing isis\nping mpls segment routing static egress-ip\nping mpls segment-routing springte\nping overlay\nping srv6\nping vpls instance", "desc": "Juniper Junos — System" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "BGP", "title": "traceroute", "cmd": "traceroute\ntraceroute clns\ntraceroute ethernet\ntraceroute monitor\ntraceroute mpls bgp\ntraceroute mpls segment-routing isis\ntraceroute mpls segment-routing ospf\ntraceroute mpls segment-routing spring-te\ntraceroute mpls segment-routing static egress-ip\ntraceroute overlay\ntraceroute srv6", "desc": "Juniper Junos — System" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "file", "cmd": "file\nfile archive\nfile change-owner\nfile change-permission\nfile checksum sha-256\nfile checksum sha1\nfile compress\nfile copy\nfile delete\nfile link\nfile list\nfile rename\nfile show", "desc": "Juniper Junos — System" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "set", "cmd": "set\nset chassis display message\nset chassis virtual-chassis\nset cli idle-timeout\nset cli logical-system\nset cli restart-on-upgrade\nset cli timestamp\nset date\nset date ntp\nset services jinsightd subscribe health-monitor", "desc": "Juniper Junos — System" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "DELETE (DTCP)", "cmd": "DELETE (DTCP)\ndelete\ndelete chassis fpc\ndelete services jinsightd subscribe health-monitor", "desc": "Juniper Junos — System" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "top", "cmd": "top\nup", "desc": "Juniper Junos — System" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "ADD (DTCP)", "cmd": "ADD (DTCP)", "desc": "Juniper Junos — System" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit ]", "cmd": "[edit ]", "desc": "Juniper Junos — `[edit ]` — 1 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit No Link Title hierarchical-policer hierarchical-policer-name premium if-ex", "cmd": "[edit No Link Title hierarchical-policer hierarchical-policer-name premium if-exceeding-pps]\n[edit No Link Title hierarchical-policer hierarchical-policer-name premium if-exceeding]", "desc": "Juniper Junos — `[edit No]` — 2 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit accounting-options class-usage-profile profile-name]", "cmd": "[edit accounting-options class-usage-profile profile-name]\n[edit accounting-options file filename]\n[edit accounting-options filter-profile profile-name]\n[edit accounting-options flat-file-profile profile-name fields]\n[edit accounting-options flat-file-profile profile-name]\n[edit accounting-options interface-profile profile-name]\n[edit accounting-options mib-profile profile-name]\n[edit accounting-options routing-engine-profile profile-name]\n[edit accounting-options]", "desc": "Juniper Junos — `[edit accounting-options]` — 9 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit applications application application-name ]", "cmd": "[edit applications application application-name ]\n[edit applications application application-name term term-name]\n[edit applications application application-name]\n[edit applications application ike-esp-nat]\n[edit applications application-set application-set-name]\n[edit applications]", "desc": "Juniper Junos — `[edit applications]` — 6 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit bridge-options]", "cmd": "[edit bridge-options]", "desc": "Juniper Junos — `[edit bridge-options]` — 1 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "[edit diameter network-element element-name forwarding route dne-route-name]", "cmd": "[edit diameter network-element element-name forwarding route dne-route-name]\n[edit diameter network-element element-name forwarding]\n[edit diameter network-element element-name peer peer-name]\n[edit diameter network-element element-name]\n[edit diameter network-statement element-name forwarding route dne-route-name]\n[edit diameter peer peer-name No Link Title]\n[edit diameter peer peer-name connect-actively]\n[edit diameter peer peer-name]\n[edit diameter transport transport-name]\n[edit diameter]", "desc": "Juniper Junos — `[edit diameter]` — 10 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit dynamic policy-options condition]", "cmd": "[edit dynamic policy-options condition]\n[edit dynamic policy-options]\n[edit dynamic]", "desc": "Juniper Junos — `[edit dynamic]` — 3 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit family ethernet-switching filter filter name term term name from ip-versio", "cmd": "[edit family ethernet-switching filter filter name term term name from ip-version ipv4]\n[edit family ethernet-switching filter filter name term term name from ip-version ipv6]\n[edit family]", "desc": "Juniper Junos — `[edit family]` — 3 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit fc-fabrics fabric-name fc2]", "cmd": "[edit fc-fabrics fabric-name fc2]\n[edit fc-fabrics fabric-name protocols fip]\n[edit fc-fabrics fabric-name proxy]\n[edit fc-fabrics fabric-name]\n[edit fc-fabrics fc-fabric-name protocols fip interface interface-name]\n[edit fc-fabrics fc-fabric-name protocols fip]\n[edit fc-fabrics fc-fabric-name protocols]\n[edit fc-fabrics fc-fabric-name]\n[edit fc-fabrics]", "desc": "Juniper Junos — `[edit fc-fabrics]` — 9 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit fc-options]", "cmd": "[edit fc-options]", "desc": "Juniper Junos — `[edit fc-options]` — 1 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit hierarchical-policer]", "cmd": "[edit hierarchical-policer]", "desc": "Juniper Junos — `[edit hierarchical-policer]` — 1 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "[edit interface interface-name gigether-options]", "cmd": "[edit interface interface-name gigether-options]\n[edit interface interface-name]\n[edit interface ppp interface unit logical-unit-number ppp-max-payload ppp-max-payload]\n[edit interface]", "desc": "Juniper Junos — `[edit interface]` — 4 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit jsrc partition partition-name]", "cmd": "[edit jsrc partition partition-name]\n[edit jsrc]", "desc": "Juniper Junos — `[edit jsrc]` — 2 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit logical system logical system name security idp sensor-configuration packe", "cmd": "[edit logical system logical system name security idp sensor-configuration packet-log]", "desc": "Juniper Junos — `[edit logical]` — 1 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "[edit logical-routers]", "cmd": "[edit logical-routers]", "desc": "Juniper Junos — `[edit logical-routers]` — 1 contexts" }, { "os": "junos", "role": "switch", "vendor": "Juniper", "cat": "EtherChannel", "title": "[edit multi-chassis multi-chassis-protection IP address of MC-LAG peer]", "cmd": "[edit multi-chassis multi-chassis-protection IP address of MC-LAG peer]\n[edit multi-chassis multi-chassis-protection peer]\n[edit multi-chassis]", "desc": "Juniper Junos — `[edit multi-chassis]` — 3 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Multicast", "title": "[edit multicast-snooping-options graceful-restart]", "cmd": "[edit multicast-snooping-options graceful-restart]\n[edit multicast-snooping-options]", "desc": "Juniper Junos — `[edit multicast-snooping-options]` — 2 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit poe notification-control fpc slot-number]", "cmd": "[edit poe notification-control fpc slot-number]\n[edit poe notification-control]\n[edit poe]", "desc": "Juniper Junos — `[edit poe]` — 3 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit redundant-power-system member member-number]", "cmd": "[edit redundant-power-system member member-number]\n[edit redundant-power-system member vc-member-number]\n[edit redundant-power-system member]\n[edit redundant-power-system]", "desc": "Juniper Junos — `[edit redundant-power-system]` — 4 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit schedulers scheduler scheduler-name]", "cmd": "[edit schedulers scheduler scheduler-name]\n[edit schedulers]", "desc": "Juniper Junos — `[edit schedulers]` — 2 contexts" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "[edit set security idp custom-attack attack-name attack-type signature protocol", "cmd": "[edit set security idp custom-attack attack-name attack-type signature protocol ipv6 extensionheader destination-option]\n[edit set security idp custom-attack attack-name attack-type signature protocol ipv6 extensionheader routing-header]\n[edit set security idp custom-attack attack-name attack-type signature protocol ipv6 extensionheader]\n[edit set security idp custom-attack attack-name attack-type signature protocol ipv6]\n[edit set]", "desc": "Juniper Junos — `[edit set]` — 5 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit smtp traceoptions]", "cmd": "[edit smtp traceoptions]\n[edit smtp]", "desc": "Juniper Junos — `[edit smtp]` — 2 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "[edit switch-options interface interface-name interface-mac-limit limit]", "cmd": "[edit switch-options interface interface-name interface-mac-limit limit]\n[edit switch-options interface interface-name]\n[edit switch-options mac-notification]\n[edit switch-options redundant-trunk-group group name]\n[edit switch-options redundant-trunk-group]\n[edit switch-options unknown-unicast-forwarding vlan vlan-name]\n[edit switch-options voip]\n[edit switch-options]", "desc": "Juniper Junos — `[edit switch-options]` — 8 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit virtual-chassis aliases]", "cmd": "[edit virtual-chassis aliases]\n[edit virtual-chassis member member-id]\n[edit virtual-chassis]", "desc": "Juniper Junos — `[edit virtual-chassis]` — 3 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit virtual-network-functions]", "cmd": "[edit virtual-network-functions]", "desc": "Juniper Junos — `[edit virtual-network-functions]` — 1 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit vmhost]", "cmd": "[edit vmhost]", "desc": "Juniper Junos — `[edit vmhost]` — 1 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "[edit wlan access-point name]", "cmd": "[edit wlan access-point name]\n[edit wlan]", "desc": "Juniper Junos — `[edit wlan]` — 2 contexts" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> For now, let’s correct the host-name:", "cmd": "> For now, let’s correct the host-name:", "desc": "Juniper Junos — Navigating Around Operational Mode: Command Shortc" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> and see what happens:", "cmd": "> and see what happens:", "desc": "Juniper Junos — Navigating Around Operational Mode: Command Shortc" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> the word run to the command:", "cmd": "> the word run to the command:", "desc": "Juniper Junos — Navigating Around Operational Mode: Command Shortc" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "VPN", "title": "> Let’s see what this looks like in full:", "cmd": "> Let’s see what this looks like in full:", "desc": "Juniper Junos — Navigating Around Operational Mode: Command Shortc" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> In fact, pretty much every command you’ve learned so far is hierarchy-aware.", "cmd": "> In fact, pretty much every command you’ve learned so far is hierarchy-aware.", "desc": "Juniper Junos — Navigating Around Operational Mode: Command Shortc" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> that you want to see in that moment.", "cmd": "> that you want to see in that moment.", "desc": "Juniper Junos — Navigating Around Operational Mode: Command Shortc" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Troubleshooting", "title": "> The disable command kept it there and just showed it as admin-down.", "cmd": "> The disable command kept it there and just showed it as admin-down.", "desc": "Juniper Junos — Navigating Around Operational Mode: Command Shortc" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> for their changes to roll back.", "cmd": "> for their changes to roll back.", "desc": "Juniper Junos — Navigating Around Operational Mode: Command Shortc" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> can use rename to quickly change it back:", "cmd": "> can use rename to quickly change it back:", "desc": "Juniper Junos — Modifying Configurations: Rename, Replace Pattern," }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> form of the annotate command.", "cmd": "> form of the annotate command.", "desc": "Juniper Junos — Commenting and Protecting Your Configuration" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> candidate configuration to a file:", "cmd": "> candidate configuration to a file:", "desc": "Juniper Junos — Loading Configurations" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> the default remote user, use:", "cmd": "> the default remote user, use:", "desc": "Juniper Junos — Login Classes" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> and assign them the correct corresponding permissions:", "cmd": "> and assign them the correct corresponding permissions:", "desc": "Juniper Junos — Login Classes" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> Let’s have a look at how to configure it:", "cmd": "> Let’s have a look at how to configure it:", "desc": "Juniper Junos — Login Classes" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> The only difference is that the 10.", "cmd": "> The only difference is that the 10.", "desc": "Juniper Junos — Policy’s Building Blocks" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> Let’s try deactivate the action within term 2:", "cmd": "> Let’s try deactivate the action within term 2:", "desc": "Juniper Junos — Policy’s Building Blocks" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "**Configuration Mode (`#`)**", "cmd": "**Configuration Mode (`#`)**", "desc": "Juniper Junos — Policy’s Building Blocks" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> and special characters:", "cmd": "> and special characters:", "desc": "Juniper Junos — Policy’s Building Blocks" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> If we configure term 1 now:", "cmd": "> If we configure term 1 now:", "desc": "Juniper Junos — Policy’s Building Blocks" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "> will be rejected, and that would be it for this route.", "cmd": "> will be rejected, and that would be it for this route.", "desc": "Juniper Junos — Policy’s Building Blocks" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> Let’s modify the policy the following way:", "cmd": "> Let’s modify the policy the following way:", "desc": "Juniper Junos — Policy’s Building Blocks" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> And configure the policy as:", "cmd": "> And configure the policy as:", "desc": "Juniper Junos — Prefix List" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "> you go straight to the policy:", "cmd": "> you go straight to the policy:", "desc": "Juniper Junos — Route Filters" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "> We create a new policy that looks like this:", "cmd": "> We create a new policy that looks like this:", "desc": "Juniper Junos — A Destination        P Prf   Metric 1   Metric 2  " }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> and placing them into the forwarding table.", "cmd": "> and placing them into the forwarding table.", "desc": "Juniper Junos — Load Balancing" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "---", "cmd": "---\n\n\n## Chapter 7: Troubleshooting Policies\n\n*71 commands extracted*\n\n**Operational Mode (`>`)**", "desc": "Juniper Junos — By Yasmin Lara" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> The terms need to be swapped.", "cmd": "> The terms need to be swapped.", "desc": "Juniper Junos — By Yasmin Lara" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "> You want to redistribute a static route for 10.", "cmd": "> You want to redistribute a static route for 10.", "desc": "Juniper Junos — Missing Terminating Action" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> You want to redistribute all subnets of 10.", "cmd": "> You want to redistribute all subnets of 10.", "desc": "Juniper Junos — Terms Out of Order" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "> with the match type longer first:", "cmd": "> with the match type longer first:", "desc": "Juniper Junos — Wrong Match Type" }, { "os": "junos", "role": "firewall", "vendor": "Juniper", "cat": "NAT", "title": "> by the accept action outside the term.", "cmd": "> by the accept action outside the term.", "desc": "Juniper Junos — A Destination        P Prf   Metric 1   Metric 2  " }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "ACL", "title": "---", "cmd": "---\n\n\n## Chapter 8: Firewall Filter Concepts\n\n*2 commands extracted*\n\n**Configuration Mode (`#`)**", "desc": "Juniper Junos — (Longest Match Goes Wrong)" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "show int", "cmd": "show int", "desc": "Juniper Junos — ▶ Operational Mode Commands (`>`)" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "cli", "cmd": "cli", "desc": "Juniper Junos — 🔧 Other / Shell Commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "Quit automore: q, Q, ^K", "cmd": "Quit automore: q, Q, ^K", "desc": "Juniper Junos — 🔧 Other / Shell Commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "System", "title": "quit Exit the management session", "cmd": "quit Exit the management session", "desc": "Juniper Junos — 🔧 Other / Shell Commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Interfaces", "title": "cli Show command-line interface settings", "cmd": "cli Show command-line interface settings", "desc": "Juniper Junos — 🔧 Other / Shell Commands" }, { "os": "junos", "role": "router", "vendor": "Juniper", "cat": "Static", "title": "router-config", "cmd": "router-config", "desc": "Juniper Junos — ⚙ Configuration Mode Commands (`#`)" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "OSPF", "title": "Example 4-1: Output from OSPF Showing RID", "cmd": "Interfaces in this area: 4 Active interfaces: 3\nNo authentication available", "desc": "IP address allocation and assignment to the various network devices and/or related interfaces (both physical and logical) is important when building a routed network for the underlay." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "OSPF", "title": "Example 4-2: Example Configuration of a Loopback and OSPF", "cmd": "feature ospf\nrouter ospf UNDERLAY\nrouter-id 10.10.1 0.1\ninterface loopback0\nip address 10.20 0.200.1/32\nip router ospf UNDERLAY ar ea 0.0.0.0\ninterface loopback1\nip address 10.10.10.1/32\nip router ospf UNDERLAY area 0.0.0.0", "desc": "The RID is used in routing protocols to uniquely identify a given neighbor and/or an index to the information received or sent to/from this neighbor in its database." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "OSPF", "title": "Example 4-3: IP Unnumbered Configuration Example", "cmd": "interface loopback1\nip address 10.10 .10.1/32\nip router ospf UNDERLAY area 0.0.0.0\nip pim sparse-mode\ninterface Ethernet2/1\nno switchport\nmtu 9216\nip unnnu mbered loopback 1\nip ospf network point-to- point\nip router ospf UNDERLAY area 0 .0.0.0\nip pim sparse-mode\nno shutdown\nIP unnumbered for Ethernet interfaces (see Figure 4-7) using the OSPF or IS-IS routing", "desc": "In addition to the RID, IP addresses are also assigned to the physical interfaces in order to build routing adjacencies." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "OSPF", "title": "interface loopback0", "cmd": "interface loopback0\nip address 10.20 0.200.1/32\nip router ospf UNDERLAY ar ea 0.0.0.0\nip pim sparse-mode\ninterface loopback1\nip address 10.10 .10.1/32\nip router ospf UNDERLAY area 0.0.0.0\nip pim sparse-mode", "desc": "protocols is available on most of the Cisco Nexus data center switches." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "OSPF", "title": "Example 4-5: OSPF Interface Configuration and Status", "cmd": "interface Ethernet2/1\nno switchport\nmtu 9216\nip addre ss 10.1.1.0/31\nip ospf network point- to-point\nip router ospf UNDERLAY area 0 .0.0.0\nip pim sparse-mode\nno shutdown\nIP address 10.1.1.0/31, Process ID UNDERLAY VRF default, area 0.0.0.0\nNo authentication", "desc": "Open Shortest Path First (OSPF) is a widely adopted IGP that has been employed in many LAN, WAN, and data center core network environments." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Routing", "title": "Example 4-6: IS-IS Configuration on a Cisco Nexus Switch", "cmd": "feature isis\nrouter isis UNDERLAY\nnet 49.0001.0100. 1001.0001.00\ninterface Ethernet2/1\nno switchport\nmtu 9216\nip addre ss 10.1.1.0/31\nip router isis UNDERLA Y\nmedium p2p\nip pim spa rse-mode\nno shutdown", "desc": "Intermediate System to Intermediate System (IS-IS)14 is another link-state routing protocol that also uses the SPF algorithm to calculate the shortest and loop-free paths through a network." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 4-7: eBGP: next-hop unchanged", "cmd": "route-map NH-UNCHANGED permit 10\nset ip next-hop unchanged\nrouter bgp 65501\nneighbor 10.1.1.1 remote-as 65500\naddress-family l2vpn evpn\nsend-community both\nroute-map NH-UNCHAN GED out", "desc": "Border Gateway Protocol (BGP) is a path vector routing protocol that exchanges routing and reachability information among various autonomous systems (AS)." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 4-8: eBGP: retain Route-Target all", "cmd": "router bgp 65500\nretain route-target all", "desc": "As eBGP is used for the underlay as well as for the overlay, a separate BGP peering for the EVPN address family (that is, overlay) is recommended." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 4-9: Two-AS Only: disable-peer-as-check (Spine Only)", "cmd": "router bgp 65500\nrouter-id 10.10.10.201\nneighbor 10.1.1.0 remote-as 65501\naddress-family ipv4 u nicast\nsend-community both\ndisable-peer-as-check\naddress-family l2vpn evpn\nsend-community both\ndisable-peer-as-che ck", "desc": "one AS, and each leaf (or leaf pair in virtual PortChannel [vPC]) belongs to a unique AS." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 4-10: Two-AS Only: allowas-in (Leaf Only)", "cmd": "router bgp 65501\nrouter-id 10.10.10.1\nneighbor 10.1.1.1 remote-a s 65500\naddress-family ipv4 unicast\nallowas-in\naddress-family l 2vpn evpn\nsend-community both\nallowas-in", "desc": "NX-OS VXLAN BGP EVPN — BGP" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 4-11: Static Ingress Replication Configuration", "cmd": "interface NVE 1\nmember vni 30001\nBGP EVPN supports unicast mode. For example, in Example 4-12, the BGP EVPN control", "desc": "In unicast mode, the data packets are replicated by the ingress VTEP and sent to the respective neighboring VTEPs that are part of the same VNI (see Figure 4-12)." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 4-12: Ingress Replication Configuration with EVPN", "cmd": "interface NVE 1\nmember vni 30001", "desc": "supported by the forwarding functionality that is embedded at the VTEPs." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Multicast", "title": "Example 4-13: PIM Anycast RP Configuration", "cmd": "ip pim rp-address 10.254.254.254\nip pim anycast-rp 10.254.254.254 10.254.254.1 (Spine#1 IP)\nip pim anycast-rp 10.254.254.254 10.254.254.2 (Spine#2 IP)\nip pim anycast-rp 10.254.254.254 10.254.254.3 (Spine#3 IP)\nip pim anycast-rp 10.254.254.254 10.254.254.4 (Spine#4 IP)\ninterface loopback 200\nip address 10.254.25 4.1/32\nip pim sparse-mode\ninterface loopback 254\nip address 10.254.25 4.254/32\nip pim sparse-mode", "desc": "In PIM ASM, source trees (S,G) are created at the VTEP." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Multicast", "title": "Example 4-14: Using Anycast RP", "cmd": "ip pim rp-address 10.254.254.254\nPIM BiDir offers a different way of providing multidestination traffic replication in multicast", "desc": "NX-OS VXLAN BGP EVPN — Multicast" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Multicast", "title": "Example 4-15: Phantom RP Configuration Spine#1 (Primary)", "cmd": "ip pim rp address 10.254.254.254 bidir\ninterface loopback 254\nip address 10.254.25 4.253/30\nip pim sparse-mode", "desc": "NX-OS VXLAN BGP EVPN — Multicast" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Multicast", "title": "Example 4-17: Using Phantom RP", "cmd": "ip pim rp address 10.254.254.254 bidir", "desc": "NX-OS VXLAN BGP EVPN — Multicast" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Multicast", "title": "Example 4-18: Phantom RP Configuration with Load Balancing of Spine#1", "cmd": "ip pim rp address 10.254.254.254 bidir grou p 239.239.0.0/24\nip pim rp address 10.254.253.254 bidir group 239.239.1.0/24\ninterface loopback 254\nip address 10.254.25 4.253/30\nip pim sparse-mode\ninterface loopback 253\nip address 10.254.25 3.253/29\nip pim sparse-mode", "desc": "NX-OS VXLAN BGP EVPN — Multicast" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Multicast", "title": "Example 4-20: Using Phantom RP", "cmd": "ip pim rp address 10.254.254.254 bidir group 239.239.0.0/24\nip pim rp address 10.254.253.254 bidir group 239.239.1.0/24", "desc": "NX-OS VXLAN BGP EVPN — Multicast" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Example 5-1: Sample Layer 2 VNI Configuration on Different Edge Devices", "cmd": "vlan 10\nvlan 20\nvlan 100\nvlan 200\nvlan 1000\nvlan 2000", "desc": "Most servers or endpoints in a network are connected using classic Ethernet interfaces as described in IEEE 802." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Example 5-2: Sample Layer 2 VNI Configuration with per-Port VLAN Significance", "cmd": "vlan 3501\nvlan 3502\nswitchport mode trun k\nswitchport vlan mappi ng enable\nswitchport vlan mapping 10 350 1\ninterface Ethernet 1/9\nswitchport mode trun k\nswitchport vlan mappi ng enable\nswitchport vlan mapping 10 350 2\nVLAN mapping approach and the bridge domain mapping approach. By using the VXLAN\nVNI as the global identifier, the scaling of the VLAN namespace becomes possible and the", "desc": "The ability to have switch-local or switch-scoped VLANs permits the scaling of the VLAN namespace across the fabric with VXLAN." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 5-3: Sample Configuration to Advertise Layer 2 VNI Routes into BGP EVPN", "cmd": "route-target export auto\nvni 30002 l2\nroute-target export auto", "desc": "In order to advertise the L2VNI within the BGP-based EVPN address family, configuration of the MAC-based EVPN instance is required, as shown in Example 5-3." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 5-4: Sample Output for Route Distinguisher per Layer 2 VNI with Automated Derivation", "cmd": "LEAF1# show bgp l2vpn evpn vni-id 30001 | include \"Route Distinguisher\"\nRoute Distinguisher: 10.10.10.1:32777            (L2VNI 30001)", "desc": "With the Cisco implementation of BGP-EVPN, the Route Distinguisher (RD) and route target (RT) values are derived automatically." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Routing", "title": "Example 5-5: VRF Lite Configuration Example", "cmd": "Router #1\nvrf conte xt VRF-B\ninterface eth1/10.1002\nencapsulation dot1q 1002\nvrf member VRF-B\nip address 10.2. 2.1/24\nip router ospf 100 are a 0\nrouter ospf 100\nvrf VRF-B\nvrf conte xt VRF-B\ninterface eth1/10.1002\nencapsulation dot1q 1002\nvrf member VRF-B\nip address 10.2. 2.2/24\nip router ospf 100 are a 0\nvrf VRF-B", "desc": "NX-OS VXLAN BGP EVPN — Routing" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 5-6: Basic VRF Configuration in a VXLAN BGP EVPN Network", "cmd": "vrf context VRF-A\nvni 50001\nroute-target both auto\nroute-target both auto evpn\naddress-family ipv6 unicast\nroute-target both auto\nroute-target both auto evpn", "desc": "The previous section focused on comparing Layer 3 multitenancy in VXLAN with BGP EVPN and MPLS L3VPNs." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Example 5-7: Sample Output for Route Distinguisher per Layer 3 VNI with Automated Derivation", "cmd": "LEAF1# show vrf\nVRF-Name                 VRF-ID State    Reason\nVRF-A                                 3  Up         --\ndefault                                  1  Up         --\nmanagement                         2  Up        --\nLEAF11# show bgp l2vpn evpn vni-id 50001 | include \"Route Distinguisher\"\nRoute Distinguisher: 10.10.10.1:3     (L3VNI 50001)", "desc": "the RT value remains the same across all the edge devices in the same VRF." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 5-8: Sample BGP EVPN-Related VRF Configuration for Layer 3 Multitenancy", "cmd": "router bgp 65501\nvrf VRF-A\ninterface nve1\nmember vni 5 0001 associate-vrf", "desc": "NX-OS VXLAN BGP EVPN — BGP" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Routing", "title": "Example 5-9: VRF-Related VLAN and Bridge Domain Configuration for Layer 3 Multitenancy", "cmd": "VLAN Oriented Command Line Interface\nvlan 2501\ninterface Vlan2501\nno shutdown\nmtu 9216\nvrf memb er VRF-A\nip forward\nvni 50001\nmember vni 5000 1\ninterface bdi2501\nno shutdown\nmtu 9216\nvrf memb er VRF-A\nip forward", "desc": "NX-OS VXLAN BGP EVPN — Routing" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 6-1: show bgp l2vpn evpn vni-id 30001 Output (at VTEP V1)", "cmd": "BGP routing table information for VR F default, address family L2VPN EVPN\nBGP table version is 43, local router ID is 10.10.10.1\nNetwork                    Next Hop             Metric   LocPrf     Weight Path\nmatch the import statement, forwarding does not occur because the entry resides only in", "desc": "In overlays, a common requirement for the VXLAN data plane encapsulation is to provide a basic Layer 2 service (Layer 2 Gateway or L2GW service)." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 6-2: show l2route evpn mac all Output at VTEP V1", "cmd": "V1# show l2route evpn mac all\nTopology    Mac Address    Pr od   Next Hop (s)\n----------- -------------- ------ ------------ ---\n10           0000.3000.1102  BGP    10.200.200.2\n10           0000.3000.1101  Local   Eth1/5", "desc": "NX-OS VXLAN BGP EVPN — BGP" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Example 6-3: show mac address-table vlan 10 Output at VTEP V1", "cmd": "VLAN     MAC Address      Type      age     Secure NTFY Ports", "desc": "NX-OS VXLAN BGP EVPN — Troubleshooting" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Routing", "title": "Example 6-6: show ip route vrf VRF-A Output at VTEP V1", "cmd": "IP Route Table for VRF \"VR F-A\"\nARP tables for a given VRF is a good starting point. Example 6-7 shows the host entries in", "desc": "*>l                         10." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Routing", "title": "Example 6-7: show ip arp vrf VRF-A Output at VTEP V1", "cmd": "IP ARP Table for context VRF-A", "desc": "NX-OS VXLAN BGP EVPN — Routing" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Routing", "title": "Example 6-8: show run vrf VRF-A Output (at VTEP V1)", "cmd": "interface Vlan10\nvrf member VR F-A\nip address 192.1 68.1.1/24 tag 12345\nfabric forwarding mode anycast-gate way\nroute-map FABRIC-RMAP-REDIST-SUBNET permit 10\nmatch tag 12345\nrouter bgp 65501\nvrf X\nredistribute direct route-map FABRIC-RMAP-REDIST-SUBNET", "desc": "When the traffic reaches VTEP V2, it is decapsulated, and the subsequent destination IP lookup in vrf VRF-A, which is mapped from VNI 50001, results in the 192." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "OSPF", "title": "Example 8-1: Advertise iBGP Routes to OSPF", "cmd": "route-map RM_iBGP_ALLOW permit 10\nmatch route-type internal\nrouter ospf EXTERNAL\nvrf VRF-A", "desc": "Note that this only redistributes routes originated in BGP; routes redistributed into BGP from another routing protocol are not in turn redistributed." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "interface Ethernet1/10", "cmd": "interface Ethernet1/10\nno switchport\ninterface Ethern et1/10.1002\nmtu 9216\nvrf member VRF-B\nip address 10.2. 2.1/30\nno shutdown\nrouter bgp 65501\nvrf VRF-B\nneighbor 10.2.2.2 remote-as 65599\nupdate-source Ethernet1/10.100 2\naddress-family ipv4 unicast", "desc": "When iBGP IP prefixes are advertised into the external network via an appropriate routing protocol, additional considerations apply with regard to summarizing the entire internal IP prefix space." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 8-3: LISP Extension from VXLAN BGP EVPN", "cmd": "feature lisp\nip lisp itr-etr\nip lisp itr map -resolver\nip lisp etr map-server 1 0.8.12.9 key MY_MS_KEY\nvrf context VRF-A\nip lisp locator-vrf default\nrouter bgp 65501\nvrf VRF-A\nNetwork (MPLS L3VPN) provides external connectivity by keeping intact the Layer 3\nL2VPN EVPN address family, while MPLS L3VPN leverages the VPNv4 address family for IPv4", "desc": "For the routing protocol, eBGP between the border node and external router is the recommended option." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 8-4: MPLS Extension from VXLAN BGP EVPN", "cmd": "vrf context VRF-A\nvni 50001\nroute-target both 65599: 50001\nroute-target both auto\nroute-target both auto evpn\nrouter bgp 65501\nneighbor 10.2 .2.2 remote-as 65599\nupdate-source loopback254\naddress-family vpnv4 unic ast\nneighbor 10.10.10.201 remote-as 655 01\naddress-family l2vpn evpn\nvrf VRF-A\ninterface ethernet 1/10\nip address 10.2.2.1/ 30", "desc": "from a VXLAN BGP EVPN infrastructure to a MPLS L3VPN–based transport network." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 11-2: MAC Entries Advertised Over BGP-EVPN at Leaf", "cmd": "L11# show l2route evpn mac all\nTopology    Mac Address    Pro d  Next Hop (s)\n----------- -------------- ------ ------------ ---\n100       0011.0100.0001   Local   Eth2/1", "desc": "2/1 on VLAN 100." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Example 11-3: VLAN to Layer 2 VNI Mapping at Leaf", "cmd": "VLAN  Segment-id", "desc": "The output in Example 11-2 shows the presence of the locally learned MAC address in topology 100, where topology 100 maps to the VLAN ID." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 11-4: BGP EVPN Route type 2 Entries at Leaf", "cmd": "BGP routing table information for VRF default, address family L2VPN EVPN\nBGP table version is 1670, local router ID is 10.100.100.11\nnetwork            Next Hop            Metric       LocPrf                              Weight\nevpn command on a remote leaf.", "desc": "The MAC is verified in the local address table as well as in the L2RIB table." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 11-7: MAC Entries Received Over BGP EVPN at a Remote Leaf", "cmd": "L12# show l2route evpn mac all\nTopology      Mac Address   Pr od   Next Hop (s)\n-----------   -------------- ------ ------------ ---\n100       0011.0100.0001 BGP   10.200.200.11", "desc": "NX-OS VXLAN BGP EVPN — BGP" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Example 11-8: MAC Table Output at a Remote Leaf", "cmd": "VLAN    MAC Address      T ype      age    Secure NTFY Ports", "desc": "NX-OS VXLAN BGP EVPN — Troubleshooting" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Example 11-9: ARP Table Output at a Leaf", "cmd": "IP ARP Table for context Org1:Part1", "desc": "NX-OS VXLAN BGP EVPN — Troubleshooting" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Example 11-10: Adjacency Output for an ARP Entry", "cmd": "next-hop         rewrite info          interface", "desc": "The output derived from the ARP table shows that the MAC address previously tracked (0011." }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 11-12: IP/MAC Entries Advertised Over BGP EVPN at a Leaf", "cmd": "L11# show l2route evpn mac-ip all\nTopology ID Mac Address   Prod     Host IP                         Next Hop (s)\n100              0011.0100.0001 HMM 192.168.100.200                   N/A", "desc": "NX-OS VXLAN BGP EVPN — BGP" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "BGP", "title": "Example 11-15: IP/MAC Entries Received Over BGP EVPN at a Remote Leaf", "cmd": "L12# show l2route evpn mac-ip all", "desc": "NX-OS VXLAN BGP EVPN — BGP" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Example 11-18: Detailed VTEP Peer Information on a Remote Leaf", "cmd": "NVE Interface        : nve1", "desc": "NX-OS VXLAN BGP EVPN — VLAN" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Example 11-19: Sample Output from the ping nve Command", "cmd": "L37# ping nve ip unknown vrf Org1:Part1 payload ip 192.168.166.51 192.168.165.51 port 5644 25 proto\n6 payload-end vni 50000 verbose\nCodes: '!' - success, 'Q' - request not sent, '.' - timeout,\n'D' - Destination Unreachable, 'X' - unknown return code,\n'm' - malformed request(parameter problem),\n'c' - Corrupted Data/Test\nSender handle: 410\n! sport 52677 size 56,Reply from 192.168.166.51,time = 1 ms\n! sport 52677 size 56,Reply from 192.168.166.51,time = 1 ms\n! sport 52677 size 56,Reply from 192.168.166.51,time = 1 ms\n! sport 52677 size 56,Reply from 192.168.166.51,time = 1 ms\n! sport 52677 size 56,Reply from 192.168.166.51,time = 1 ms\nSuccess rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms\nTotal time elapsed 42 ms", "desc": "NX-OS VXLAN BGP EVPN — VLAN" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Example 11-20: Sample Output from the traceroute nve Command", "cmd": "Traceroute Request to peer ip 10.1.1.140 source ip 10.1.1.37", "desc": "NX-OS VXLAN BGP EVPN — VLAN" }, { "os": "nxos", "role": "switch", "vendor": "Cisco", "cat": "VLAN", "title": "Example 11-21: Sample Output from the pathtrace nve Command", "cmd": "bandwidth:171798691880 000000\nbandwidth:171798691880000 000", "desc": "NX-OS VXLAN BGP EVPN — VLAN" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "show version | grep Serial", "cmd": "show version | grep Serial", "desc": "Step 1 To purchase additional licenses, see http://www." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "ASA Virtual: Configure Regular Smart Software Licensing", "cmd": "ASA Virtual: Configure Regular Smart Software Licensing", "desc": "Step 1 (Cisco Smart Software Manager), request and copy a registration token for the virtual account to which you want to add this device." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "HTTP proxy with authentication is not supported.", "cmd": "HTTP proxy with authentication is not supported.", "desc": "Step 1 Request a registration token on the Smart Software Manager On-Prem." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "ASA Virtual: Configure Utility (MSLA) Smart Software Licensing", "cmd": "ASA Virtual: Configure Utility (MSLA) Smart Software Licensing", "desc": "Step 1 In the Smart Software Manager On-Prem, request and copy a registration token for the virtual account to which you want to add this device." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "show license features", "cmd": "show license features", "desc": "Step 1 From the ASA Virtual CLI, generate a return code: license smart reservation return Example: ciscoasa(config)# license smart reservation return WARNING: ASAv platform license state is Limited functionality." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "asa again.", "cmd": "asa again.", "desc": "Step 1 Connect to the Firepower 4100/9300 chassis CLI (console or SSH), and then session to the ASA: connect module slot console connect asa Example: Firepower> connect module 1 console Firepower-module1> connect asa asa> The next time you connect to the ASA console, you go direc…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "show app", "cmd": "show app", "desc": "Step 1 Enter security services mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Telnet escape character is '~'.", "cmd": "Telnet escape character is '~'.", "desc": "Step 1 Connect to the module CLI using a console connection or a Telnet connection." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "firewall transparent", "cmd": "firewall transparent", "desc": "Set the firewall mode to transparent:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "mode multiple", "cmd": "mode multiple", "desc": "Change to multiple context mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "copy disk0:old_running.cfg startup-config", "cmd": "copy disk0:old_running.cfg startup-config", "desc": "Step 1 Copy the backup version of your original running configuration to the current startup configuration:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure a Class for Resource Management", "cmd": "Configure a Class for Resource Management", "desc": "Step 1 Specify the class name and enter the class configuration mode: High Availability and Scalability" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "context name", "cmd": "context name", "desc": "Step 1 Add or modify a context:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "changeto context name", "cmd": "changeto context name", "desc": "Step 1 Change to a context:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "no context name", "cmd": "no context name", "desc": "Step 1 Remove a single context:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "failover lan unit primary", "cmd": "failover lan unit primary", "desc": "Step 1 Designate this unit as the primary unit:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "Configure Active/Active Failover", "cmd": "Configure Active/Active Failover", "desc": "Step 1 Re-enter the exact same commands as on the primary unit except for the failover lan unit primary command." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "failover cloud unit secondary", "cmd": "failover cloud unit secondary", "desc": "Step 1 Designate this unit as the backup unit:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "failover cloud port control port-number", "cmd": "failover cloud port control port-number", "desc": "Step 1 Specify the TCP port to be used for communication with the HA peer:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "failover cloud subscription-id subscription-id", "cmd": "failover cloud subscription-id subscription-id", "desc": "Step 1 Configure the Azure Subscription ID for the Azure Service Principal:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "failover cloud route-table table-name [subscription-id sub-id]", "cmd": "failover cloud route-table table-name [subscription-id sub-id]", "desc": "Step 1 Configure an Azure route table that requires updating during a failover:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "Enable the secondary unit.", "cmd": "Enable the secondary unit.\nEnable the Secondary Unit for Active/Backup Failover", "desc": "Step 1 Enable failover: ciscoasa(config)# failover Step 2 Save the system configuration to flash memory: ciscoasa(config)# write memory Example The following example shows a complete configuration for the primary unit: ciscoasa(config)# failover cloud unit primary ciscoasa(config…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "failover active", "cmd": "failover active", "desc": "Step 1 Force a failover when entered on the standby unit:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "failover cloud update routes", "cmd": "failover cloud update routes", "desc": "Update the routes on the active unit:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "Failover Status", "cmd": "Failover Status", "desc": "Test the Azure authentication elements in your ASA Virtual HA configuration: test failover cloud authentication Example: ciscoasa(config)# test failover cloud authentication Checking authentication to cloud provider Authentication Succeeded If authentication fails the command out…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "Configure the Cluster Interface Mode on Each Unit", "cmd": "Configure the Cluster Interface Mode on Each Unit", "desc": "Step 1 Cable the cluster control link network, management network, and data networks." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "cluster interface-mode {individual | spanned} check-details", "cmd": "cluster interface-mode {individual | spanned} check-details", "desc": "Step 1 Show any incompatible configuration so that you can force the interface mode and fix your configuration later; the mode is not changed with this command:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "ip local pool poolname first-address — last-address [mask mask]", "cmd": "ip local pool poolname first-address — last-address [mask mask]", "desc": "Step 1 Configure a pool of Local IP addresses (IPv4 and/or IPv6), one of which will be assigned to each cluster unit for the interface: (IPv4)" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "interface physical_interface", "cmd": "interface physical_interface", "desc": "Step 1 Specify the interface you want to add to the channel group:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "configure the cluster control link interfaces separately on each node.", "cmd": "configure the cluster control link interfaces separately on each node.", "desc": "Step 1 Enable the cluster control link interface before you join the cluster." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "IP address on the same network for each node:", "cmd": "IP address on the same network for each node:", "desc": "Step 1 Configure the same cluster control link interface as you configured for the control node." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "cluster group name", "cmd": "cluster group name", "desc": "Step 1 Enter cluster configuration mode:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "interface Port-channel48", "cmd": "interface Port-channel48\ndescription Clustering Interface\ncluster group ", "desc": "Step 1 FXOS: Add an ASA Cluster, on page 477 Step 2 ASA: Change the Firewall Mode and Context Mode, on page 487 Step 3 ASA: Configure Data Interfaces, on page 487 Step 4 ASA: Customize the Cluster Configuration, on page 490 Step 5 ASA: Manage Cluster Members, on page 512 High Ava…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "interface id", "cmd": "interface id", "desc": "Step 1 Specify the interface ID." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "show cluster info", "cmd": "show cluster info", "desc": "Step 1 Confirm that this unit is the control unit:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "cluster interface-mode individual check-details", "cmd": "cluster interface-mode individual check-details", "desc": "Step 1 Show any incompatible configuration so that you can force the interface mode and fix your configuration later; the mode is not changed with this command:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "Cluster Control Link (CCL).", "cmd": "Cluster Control Link (CCL).\nIP address is allocated to the CCL interfaces of ASA virtual", "desc": "Step 1 Prepare the template." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "Configure IMDSv2 Required Mode in ASA Virtual Clustering by Updating Stack", "cmd": "Configure IMDSv2 Required Mode in ASA Virtual Clustering by Updating Stack\nConfigure IMDSv2 Required Mode in ASA Virtual Clustering by Updating Stack", "desc": "Step 1 From the AWS console, choose Services > EC2 > Auto Scaling groups > Created ClusterAutoscale group." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "cluster interface-mode individual force", "cmd": "cluster interface-mode individual force\npolicy-map global_policy", "desc": "Step 1 From the AWS console, go to CloudFormation and click Stacks." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "Enable Target Failover for ASA virtual in AWS", "cmd": "Enable Target Failover for ASA virtual in AWS", "desc": "Step 1 Deploy the ASAVirtual instance by using the cluster day 0 configuration with the required number of interfaces - three interfaces if you are using Gateway Load Balancer (GWLB), or four interfaces if you are using non-native load balancer." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "HA", "title": "cluster info command.", "cmd": "cluster info command.", "desc": "Step 1 Prepare the template." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "Interfaces", "cmd": "Interfaces", "desc": "Enable jumbo frame support:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "interface ethernet1/port", "cmd": "interface ethernet1/port", "desc": "Step 1 Enter interface configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "interface vlan id", "cmd": "interface vlan id", "desc": "Step 1 Add a VLAN interface." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "interface port-channel channel_id", "cmd": "interface port-channel channel_id", "desc": "Step 1 Specify the port-channel interface:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "interface loopback number", "cmd": "interface loopback number", "desc": "Step 1 Create a loopback interface:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "access-list name extended permit ip any host loopback_ip", "cmd": "access-list name extended permit ip any host loopback_ip", "desc": "Step 1 Create an access list identifying traffic to the loopback interface IP address." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "interface {physical_interface | port-channel number}.subinterface", "cmd": "interface {physical_interface | port-channel number}.subinterface", "desc": "Step 1 Specify the new subinterface:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "Configure the VTEP Source Interface", "cmd": "Configure the VTEP Source Interface", "desc": "Step 1 Configure the VTEP Source Interface, on page 808." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "interface vni vni_num", "cmd": "interface vni vni_num", "desc": "Step 1 Create the VNI interface:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "vxlan port number", "cmd": "vxlan port number", "desc": "Set the VXLAN UDP port:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "Configure the VTEP Source Interface for Geneve", "cmd": "Configure the VTEP Source Interface for Geneve", "desc": "Step 1 Configure the VTEP Source Interface for Geneve, on page 814." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "Interfaces", "cmd": "Interfaces\nConfigure Bridge Group Interfaces", "desc": "Step 1 Define the Virtual Private Dialup Network (VPDN) group name of your choice to represent this connection: vpdn group group_name request dialout pppoe Example: ciscoasa(config)# vpdn group pppoe-sbc request dialout pppoe Step 2 If your ISP requires authentication, select an…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "interface bvi bridge_group_number", "cmd": "interface bvi bridge_group_number", "desc": "Step 1 Create a BVI:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "Configure the MTU and TCP MSS", "cmd": "Configure the MTU and TCP MSS", "desc": "Automatically assign private MAC addresses to each interface: mac-address auto [prefix prefix] If you do not enter a prefix, then the ASA autogenerates the prefix based on the last two bytes of the interface MAC address." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "mtu interface_name bytes", "cmd": "mtu interface_name bytes", "desc": "Step 1 Set the MTU." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "same-security-traffic permit inter-interface", "cmd": "same-security-traffic permit inter-interface", "desc": "Step 1 Enable interfaces on the same security level so that they can communicate with each other:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "interface id zone-member zone_name", "cmd": "interface id zone-member zone_name", "desc": "Step 1 Add the zone: zone name Example: zone outside The zone name can be up to 48 characters in length." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "hostname name", "cmd": "hostname name", "desc": "Step 1 Specify the hostname for the ASA or for a context." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "clock timezone zone", "cmd": "clock timezone zone", "desc": "Step 1 Set the time zone." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "ntp authenticate", "cmd": "ntp authenticate", "desc": "Step 1 (Optional) Enable authentication with an NTP server." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "clock set hh:mm:ss {month day | day month} year", "cmd": "clock set hh:mm:ss {month day | day month} year", "desc": "Set the date time manually." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure the Master Passphrase", "cmd": "Configure the Master Passphrase\nEnable PTP on each interface through which the system can contact a PTP clock in the configured domain.", "desc": "Step 1 Specify the domain number of all ports of the device: ptp domain domain_num Example: ciscoasa(config)# ptp domain 54 The domain_num argument is the domain number for all ports on the device." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "write erase", "cmd": "write erase", "desc": "Step 1 Remove the master key and the configuration that includes the encrypted passwords." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "dns domain-lookup interface_name", "cmd": "dns domain-lookup interface_name", "desc": "Step 1 Enable the ASA to send DNS requests to a DNS server to perform a name lookup for supported commands." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "policy-map global_policy", "cmd": "policy-map global_policy", "desc": "Step 1 Configure the hardware bypass to activate during a power failure: hardware-bypass GigabitEthernet {1/1-1/2 | 1/3-1/4} [sticky] Example: ciscoasa(config)# hardware-bypass GigabitEthernet 1/1-1/2 ciscoasa(config)# hardware-bypass GigabitEthernet 1/3-1/4 The sticky keyword ke…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Enable ASP Load Balancing", "cmd": "Enable ASP Load Balancing\nEnable ASP Load Balancing", "desc": "Enable the transactional commit model for the rule engine: asp rule-engine transactional-commit option Where the options are: • access-group—Access rules applied globally or to interfaces." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "DHCP", "title": "Enable the DHCPv4 Server", "cmd": "Enable the DHCPv4 Server", "desc": "Step 1 Enable the DHCPv4 Server, on page 921." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "DHCP", "title": "dhcpd address ip_address_start-ip_address_end if_name", "cmd": "dhcpd address ip_address_start-ip_address_end if_name", "desc": "Step 1 Create a DHCP address pool for an interface." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "DHCP", "title": "dhcpd option code ip addr_1 [addr_2]", "cmd": "dhcpd option code ip addr_1 [addr_2]", "desc": "Step 1 Configure a DHCP option that returns one or two IP addresses:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 dhcp pool pool_name", "cmd": "ipv6 dhcp pool pool_name", "desc": "Step 1 Configure the IPv6 DHCP pool that contains the information you want the DHCPv6 server to provide:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "DHCP", "title": "dhcprelay server ip_address if_name", "cmd": "dhcprelay server ip_address if_name", "desc": "Step 1 Do one or both of the following: • Specify a global DHCP server IP address and the interface through which it is reachable." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "DHCP", "title": "ipv6 dhcprelay server ipv6_address [interface]", "cmd": "ipv6 dhcprelay server ipv6_address [interface]", "desc": "Step 1 Specify the IPv6 DHCP server destination address to which client messages are forwarded." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "DHCP", "title": "Configure Dynamic DNS", "cmd": "Configure Dynamic DNS", "desc": "Step 1 Standard DDNS method: Configure a DDNS update method to enable DNS requests from the ASA." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Security", "title": "crypto key generate rsa modulus 2048", "cmd": "crypto key generate rsa modulus 2048", "desc": "Step 1 Generate one default, general-purpose RSA key pair." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Security", "title": "crypto ca trustpoint trustpoint-name", "cmd": "crypto ca trustpoint trustpoint-name", "desc": "Step 1 Create a trustpoint that corresponds to the CA from which the ASA needs to receive a certificate." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "arp interface_name ip_address mac_address [alias]", "cmd": "arp interface_name ip_address mac_address [alias]", "desc": "Step 1 Add a static ARP entry:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure MAC Address Learning", "cmd": "Configure MAC Address Learning", "desc": "Add a static MAC address entry: mac-address-table static interface_name mac_address Example: ciscoasa(config)# mac-address-table static inside 0009." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Routing", "title": "route management-only, show asp table route-management- only, clear route", "cmd": "route management-only, show asp table route-management- only, clear route", "desc": "Disable proxy ARP requests: sysopt noproxyarp interface Example: ciscoasa(config)# sysopt noproxyarp exampleinterface Display the Routing Table Use the show route command to view the entries in the routing table." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Static", "title": "route if_name 0.0.0.0 0.0.0.0 gateway_ip [distance] [tunneled]", "cmd": "route if_name 0.0.0.0 0.0.0.0 gateway_ip [distance] [tunneled]", "desc": "Add a default route: IPv4:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Static", "title": "route if_name dest_ip mask gateway_ip [distance]", "cmd": "route if_name dest_ip mask gateway_ip [distance]", "desc": "Add a static route: IPv4:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Static", "title": "sla monitor sla_id", "cmd": "sla monitor sla_id", "desc": "Step 1 Configure static route for the interface (outside 1) used to reach the network: ciscoasa(config)# route outside1 172." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Routing", "title": "Configure Policy Based Routing", "cmd": "Configure Policy Based Routing", "desc": "Step 1 In ASDM, choose Configuration > Device Setup > Interface Settings > Path Monitoring." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Routing", "title": "access-list name standard {permit | deny} {any4 | host ip_address | ip_address mask}", "cmd": "access-list name standard {permit | deny} {any4 | host ip_address | ip_address mask}\naccess-list name extended {permit | deny} protocol source_and_destination_arguments", "desc": "Step 1 Define a standard or extended access-list:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Routing", "title": "interface interface_id", "cmd": "interface interface_id", "desc": "Step 1 Enter interface configuration mode:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "BGP", "title": "Enable BGP", "cmd": "Enable BGP", "desc": "Step 1 Enable BGP, on page 1061." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "BGP", "title": "router bgp autonomous-num", "cmd": "router bgp autonomous-num", "desc": "Step 1 Enable a BGP routing process, which places the ASA in router configuration mode:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "OSPF", "title": "router ospf process_id", "cmd": "router ospf process_id\nIP Routing\nConfigure a Key Chain for Authentication", "desc": "Step 1 Create an OSPF routing process:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "OSPF", "title": "IP Routing", "cmd": "IP Routing\nConfigure a Key Chain for Authentication", "desc": "Step 1 Configure a key chain with a name: key chainkey-chain-name Example: ciscoasa(config)# key chain CHAIN1 ciscoasa(config-keychain)# You can now proceed to define the associated parameters for the key chain." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Enable IS-IS Routing Globally", "cmd": "Enable IS-IS Routing Globally", "desc": "Step 1 Enable IS-IS Routing Globally, on page 1168." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "router isis", "cmd": "router isis", "desc": "Step 1 Enable IS-IS as a routing protocol on the ASA:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "IP Routing", "cmd": "IP Routing\nEnable IS-IS Authentication", "desc": "Step 1 Enter IS-IS router configuration mode and configure an IS-IS area authentication password: area-password password [authenticate snp {validate | send-only} ] Example: ciscoasa(config)# router isis ciscoasa(config-router)# area-password track authenticate snp validate • pass…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp as-num", "cmd": "router eigrp as-num", "desc": "Step 1 Create an EIGRP routing process and enter router configuration mode for this EIGRP process:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Routing", "title": "Configure Stub Multicast Routing and Forward IGMP Messages", "cmd": "Configure Stub Multicast Routing and Forward IGMP Messages", "desc": "Enable multicast routing: multicast-routing Example: ciscoasa(config)# multicast-routing The number of entries in the multicast routing tables are limited by the amount of RAM on the ASA." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Routing", "title": "IP Routing", "cmd": "IP Routing\nConfigure a Static Multicast Route\nConfigure a Static Multicast Route", "desc": "Configure stub multicast routing and forward IGMP messages: igmp forward interface if_name Example: ciscoasa(config-if)# igmp forward interface interface1" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Routing", "title": "Configure IGMP Features", "cmd": "Configure IGMP Features\nIP hosts use IGMP to report their group memberships to directly-connected multicast routers. IGMP is used", "desc": "Step 1 Configure a static multicast route: mroute src_ip src_mask {input_if_name | rpf_neighbor} [distance] Example: ciscoasa(config)# mroute src_ip src_mask {input_if_name | rpf_neighbor} [distance] Step 2 Configure a static multicast route for a stub area: mroute src_ip src_mas…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Routing", "title": "Configure IGMP Group Membership", "cmd": "Configure IGMP Group Membership", "desc": "Disable IGMP on an interface: no igmp Example: ciscoasa(config-if)# no igmp To reenable IGMP on an interface, use the igmp command." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Routing", "title": "interface where the command is applied.", "cmd": "interface where the command is applied.\nIP Routing\nConfigure a Statically Joined IGMP Group\nConfigure a Statically Joined IGMP Group", "desc": "Configure the ASA to be a member of a multicast group: igmp join-group group-address Example: ciscoasa(config-if)# igmp join-group mcast-group The group-address argument is the IP address of the group." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "AAA", "title": "username username [password password] [privilege priv_level]", "cmd": "username username [password password] [privilege priv_level]", "desc": "Step 1 Create the user account." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "AAA", "title": "AAA Servers and the Local Database", "cmd": "AAA Servers and the Local Database\nConfigure RADIUS Server Groups", "desc": "Step 1 Load the ASA attributes into the RADIUS server." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "AAA", "title": "Configure TACACS+ Server Groups", "cmd": "Configure TACACS+ Server Groups", "desc": "Step 1 Configure TACACS+ Server Groups, on page 1297." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "AAA", "title": "AAA Servers and the Local Database", "cmd": "AAA Servers and the Local Database\nConfigure TACACS+ Server Groups", "desc": "Step 1 Identify the server group name and the protocol." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "AAA", "title": "Configure LDAP Attribute Maps", "cmd": "Configure LDAP Attribute Maps", "desc": "Step 1 Configure LDAP attribute maps." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "AAA", "title": "AAA Servers and the Local Database", "cmd": "AAA Servers and the Local Database\nConfigure LDAP Attribute Maps", "desc": "Step 1 Create an unpopulated LDAP attribute map table." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "AAA", "title": "AAA Servers and the Local Database", "cmd": "AAA Servers and the Local Database", "desc": "Step 1 Create the SDI AAA server group and enter aaa-server-group configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "ssh source_IP_address mask source_interface", "cmd": "ssh source_IP_address mask source_interface", "desc": "Step 1 Identify the IP addresses fromwhich the ASA accepts connections for each address or subnet, and the interface on which you can use SSH." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "crypto key generate {ecdsa elliptic-curve size |rsa modulus size}", "cmd": "crypto key generate {ecdsa elliptic-curve size |rsa modulus size}", "desc": "Step 1 Generate a key pair, which is required for SSH (for physical ASAs only)." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure SSH for Public Key Access", "cmd": "Configure SSH for Public Key Access", "desc": "Step 1 Generate a key pair, which is required for SSH (for physical ASAs only)." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "crypto ca trustpoint trustpoint_name", "cmd": "crypto ca trustpoint trustpoint_name", "desc": "Step 1 Configure the trustpoint." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "interface.", "cmd": "interface.\ntelnet source_IP_address mask source_interface", "desc": "Step 1 Identify the IP addresses from which the ASA accepts connections for each address or subnet on the specified" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "http source_IP_address mask source_interface", "cmd": "http source_IP_address mask source_interface", "desc": "Step 1 Identify the IP addresses from which the ASA accepts HTTPS connections for each address or subnet on the specified interface." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "http redirect interface_name [port]", "cmd": "http redirect interface_name [port]", "desc": "Enable HTTP redirect:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Upgrade the ROMMON Image: ISA 3000", "cmd": "Upgrade the ROMMON Image: ISA 3000", "desc": "Step 1 Connect to the ASA console port according to the instructions in Access the ISA 3000 Console, on page 13." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "copy ftp://[username:password@]server_ip/asa5500-firmware-xxxx.SPA disk0:asa5500-firmware-xxxx.SPA", "cmd": "copy ftp://[username:password@]server_ip/asa5500-firmware-xxxx.SPA disk0:asa5500-firmware-xxxx.SPA", "desc": "Step 1 Copy the ROMMON image to the ASA flash memory." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "copy old_config_url startup-config", "cmd": "copy old_config_url startup-config", "desc": "Step 1 Load the old ASA software version using the upgrade procedure in the ASA upgrade guide for standalone, failover, or clustering deployments." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Track Memory Allocation and Memory Usage", "cmd": "Track Memory Allocation and Memory Usage", "desc": "Run an event manager applet." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "memory logging [1024-4194304] [wrap] [size [1-2147483647]] [process process-name] [context", "cmd": "memory logging [1024-4194304] [wrap] [size [1-2147483647]] [process process-name] [context", "desc": "Step 1 Enable memory logging." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Boot configuration file contains 1 entry.", "cmd": "Boot configuration file contains 1 entry.", "desc": "Step 1 Connect to the ASA console port." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "copy running-config filename", "cmd": "copy running-config filename", "desc": "Step 1 Copy the running configuration to a backup file on the ASA Virtual:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "Context Mode", "cmd": "Context Mode", "desc": "Disable password recovery." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "capture capture_name [type {asp-drop [all | drop-code] | tls-proxy | raw-data | isakmp [ikev1 | ikev2] |", "cmd": "capture capture_name [type {asp-drop [all | drop-code] | tls-proxy | raw-data | isakmp [ikev1 | ikev2] |", "desc": "Step 1 Enable packet capture capabilities for packet sniffing and network fault isolation:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ASA Virtual and Amazon CloudWatch Graphs", "cmd": "ASA Virtual and Amazon CloudWatch Graphs", "desc": "Step 1 Open the CloudWatch console and choose Metrics in the navigation pane." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ASA Virtual and Azure Graphs", "cmd": "ASA Virtual and Azure Graphs", "desc": "Step 1 Go to the Azure portal and select Virtual Machines." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ASA Virtual and OCI Graphs", "cmd": "ASA Virtual and OCI Graphs", "desc": "Step 1 Open the navigation menu and click Instances under Compute." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "ASA can correctly route the packet back to the host.", "cmd": "ASA can correctly route the packet back to the host.", "desc": "Step 1 Draw a diagram of your single-mode ASA or security context that shows the interface names, security levels, and IP addresses." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "class-map name", "cmd": "class-map name", "desc": "Step 1 Create an L3/L4 class map to identify the traffic for which you want to customize connection settings." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "traceroute [destination_ip | hostname} [source {source_ip | source-interface}] [numeric] [timeout", "cmd": "traceroute [destination_ip | hostname} [source {source_ip | source-interface}] [numeric] [timeout", "desc": "Trace the route to a destination:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Troubleshooting", "title": "packet-tracer input ifc_name [vlan-idvlan_id ] {icmp | tcp | udp | rawip | sctp} [inline-tag tag] ...", "cmd": "packet-tracer input ifc_name [vlan-idvlan_id ] {icmp | tcp | udp | rawip | sctp} [inline-tag tag] ...", "desc": "Step 1 The command is complicated, so we divided it into parts." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging enable", "cmd": "logging enable", "desc": "Enable logging." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging host interface_name syslog_ip [tcp[/port] | udp [/port] [format emblem]]", "cmd": "logging host interface_name syslog_ip [tcp[/port] | udp [/port] [format emblem]]", "desc": "Step 1 Configure the ASA to send messages to syslog servers." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging host interface_name syslog_ip [tcp/port | udp/port] [format emblem] [secure[reference-identity", "cmd": "logging host interface_name syslog_ip [tcp/port | udp/port] [format emblem] [secure[reference-identity", "desc": "Enable secure logging by specifying the secure keyword in the logging host command." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging host interface_name ip_address{tcp [/port] | udp [/ port]] [format emblem]", "cmd": "logging host interface_name ip_address{tcp [/port] | udp [/ port]] [format emblem]", "desc": "Send syslog messages in EMBLEM format to a syslog server over UDP using port 514." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging emblem", "cmd": "logging emblem", "desc": "Send syslog messages in EMBLEM format to output destinations other than a syslog server, such as Telnet or SSH sessions." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging buffered {severity_level | message_list}", "cmd": "logging buffered {severity_level | message_list}", "desc": "Step 1 Specify which syslog messages should be sent to the internal log buffer, which serves as a temporary storage location." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging flash-maximum-allocation kbytes", "cmd": "logging flash-maximum-allocation kbytes", "desc": "Step 1 Specify the maximum amount of internal flash memory available for saving log files." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging mail {severity_level | message_list}", "cmd": "logging mail {severity_level | message_list}", "desc": "Step 1 Specify which syslog messages should be sent to an e-mail address." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging asdm {severity_level | message_list}", "cmd": "logging asdm {severity_level | message_list}", "desc": "Step 1 Specify which syslog messages should be sent to ASDM." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging queue message_count", "cmd": "logging queue message_count", "desc": "Specify the number of syslogmessages that the ASA can hold in its queue before sending them to the configured output destination." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging console { severity_level | message_list}", "cmd": "logging console { severity_level | message_list}", "desc": "Specify which syslog messages should be sent to the console port." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging history [ rate-limit number interval | level level | logging_list | level ]", "cmd": "logging history [ rate-limit number interval | level level | logging_list | level ]", "desc": "Enable SNMP logging, and specify which messages are to be sent to SNMP servers." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging monitor {severity_level | message_list}", "cmd": "logging monitor {severity_level | message_list}", "desc": "Step 1 Specify which syslog messages should be sent to a Telnet or SSH session." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "no logging hide username", "cmd": "no logging hide username", "desc": "Step 1 Show invalid usernames:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging timestamp", "cmd": "logging timestamp", "desc": "Specify that syslog messages should include the date and time that they were generated." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "no logging message syslog_id", "cmd": "no logging message syslog_id", "desc": "Prevent the ASA from generating a particular syslog message." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging message syslog_id level severity_level", "cmd": "logging message syslog_id level severity_level", "desc": "Specify the severity level of a syslog message." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "no logging message syslog-id standby", "cmd": "no logging message syslog-id standby", "desc": "Use the following command to block a specific syslog message from being generated on a standby unit." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging device-id {cluster-id | context-name | hostname | ipaddress interface_name [system] | string text}", "cmd": "logging device-id {cluster-id | context-name | hostname | ipaddress interface_name [system] | string text}", "desc": "Configure the ASA to include a device ID in non-EMBLEM-format syslog messages." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging list name {level level [class message_class] | message start_id[-end_id]}", "cmd": "logging list name {level level [class message_class] | message start_id[-end_id]}", "desc": "Step 1 Specify criteria for selecting messages to be saved in the internal log buffer." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging class message_class {buffered | console | history | mail | monitor | trap} [severity_level]", "cmd": "logging class message_class {buffered | console | history | mail | monitor | trap} [severity_level]", "desc": "Override the configuration in the specified output destination command." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Logging", "title": "logging rate-limit {unlimited | {num [interval]}} message syslog_id | level severity_level", "cmd": "logging rate-limit {unlimited | {num [interval]}} message syslog_id | level severity_level", "desc": "Apply a specified severity level (1 through 7) to a set of messages or to an individual message (not the destination) within a specified time period." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "SNMP", "title": "Enable the SNMP Agent and SNMP Server", "cmd": "Enable the SNMP Agent and SNMP Server", "desc": "Step 1 Enable the SNMP Agent and SNMP server." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server enable", "cmd": "snmp-server enable", "desc": "Enable the SNMP agent and SNMP server on the ASA." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server enable traps [all | syslog | snmp [authentication | linkup | linkdown | coldstart | warmstart]", "cmd": "snmp-server enable traps [all | syslog | snmp [authentication | linkup | linkdown | coldstart | warmstart]", "desc": "Send individual traps, sets of traps, or all traps to the NMS." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "SNMP", "title": "Configure a Physical Interface Threshold", "cmd": "Configure a Physical Interface Threshold\nConfigure a Physical Interface Threshold", "desc": "Configure the threshold value for a high CPU threshold and the threshold monitoring period." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "SNMP", "title": "Configure Parameters for SNMP Version 1 or 2c", "cmd": "Configure Parameters for SNMP Version 1 or 2c", "desc": "Configure the threshold value for an SNMP physical interface." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server host{interface hostname | ip_address} [trap| poll] [community community-string] [version", "cmd": "snmp-server host{interface hostname | ip_address} [trap| poll] [community community-string] [version", "desc": "Step 1 Specify the recipient of an SNMP notification, indicate the interface from which traps are sent, and identify the name and IP address of the NMS or SNMP manager that can connect to the ASA." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server group group-name v3 [auth | noauth | priv]", "cmd": "snmp-server group group-name v3 [auth | noauth | priv]", "desc": "Step 1 Specify a new SNMP group, which is for use only with SNMP Version 3." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server user-list list_name username user_name", "cmd": "snmp-server user-list list_name username user_name", "desc": "Configure an SNMP user list." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "SNMP", "title": "snmp-server host-group net_obj_name [trap| poll] [community community-string] [version {1 | 2c | 3", "cmd": "snmp-server host-group net_obj_name [trap| poll] [community community-string] [version {1 | 2c | 3", "desc": "Associate a single user or a group of users in a user list with a network object." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "EXEC mode:", "cmd": "EXEC mode:\nshow telemetry [history | last-report | sample]", "desc": "To view the telemetry data on ASA devices of your network, enter the following commnad in the privileged" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "debug telemetry<1-255>", "cmd": "debug telemetry<1-255>", "desc": "Step 1 To view the debug messages related to telemetry, enable the debug telemetry service using the following command in the privileged EXEC mode:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "call-home reporting anonymous", "cmd": "call-home reporting anonymous", "desc": "Step 1 Enable the Anonymous Reporting feature and create a new anonymous profile." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Enable Smart Call Home", "cmd": "Enable Smart Call Home", "desc": "Step 1 Enable the Smart Call Home service." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "changeto context admincontext", "cmd": "changeto context admincontext", "desc": "Step 1 (Multiple Context Mode only) Install the certificate in the admin context." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure Alert Group Subscription", "cmd": "Configure Alert Group Subscription", "desc": "Enter alert-group-configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure Customer Contact Information", "cmd": "Configure Customer Contact Information", "desc": "Step 1 Enter call-home configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure the Mail Server", "cmd": "Configure the Mail Server", "desc": "Step 1 Enter call-home configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure Traffic Rate Limiting", "cmd": "Configure Traffic Rate Limiting", "desc": "Step 1 Enter call-home configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "call-home test [test-message] profile profile-name", "cmd": "call-home test [test-message] profile profile-name", "desc": "Choose one of the following options: • Option 1—Send a test message manually using a profile configuration." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Copy a Destination Profile", "cmd": "Copy a Destination Profile\nCopy a Destination Profile", "desc": "Step 1 Enter call-home configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "copy profile src-profile-name dest-profile-name", "cmd": "copy profile src-profile-name dest-profile-name", "desc": "Step 1 Enter call-home configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "call-home test, contact-email-addr, customer-id (call home),", "cmd": "call-home test, contact-email-addr, customer-id (call home),", "desc": "Step 1 Enter call-home configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "ACL", "title": "Configure a Network Object Group", "cmd": "Configure a Network Object Group\nConfigure a Network Object Group", "desc": "Step 1 Create or edit a network object using the object name: object network object_name Example: hostname(config)# object network email-server Step 2 Add an address to the object using one of the following commands." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "ACL", "title": "hostname (config)# object-group network admins", "cmd": "hostname (config)# object-group network admins\nhostname (config-protocol)# description Administrator Addresses\nhostname (config-protocol)# network-object host 10.2.2.4\nhostname (config-protocol)# network-object host 10.2.2.78", "desc": "Step 1 Create or edit a network object group using the object name: object-group network group_name Example: hostname(config)# object-group network admin Step 2 Add objects and addresses to the network object group using one or more of the following commands." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "ACL", "title": "Configure a Service Group", "cmd": "Configure a Service Group", "desc": "Step 1 Create or edit a service object using the object name: object service object_name Example: hostname(config)# object service web Step 2 Add a service to the object using one of the following commands." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "ACL", "title": "clear session session_name access command to reset the flag.", "cmd": "clear session session_name access command to reset the flag.", "desc": "Step 1 Start the session." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "ACL", "title": "icmp {permit | deny} {host ip_address | ip_address mask | any} [icmp_type] interface_name", "cmd": "icmp {permit | deny} {host ip_address | ip_address mask | any} [icmp_type] interface_name", "desc": "Step 1 Create rules for ICMP traffic." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure the ASA to Integrate with Cisco Trustsec", "cmd": "Configure the ASA to Integrate with Cisco Trustsec", "desc": "Step 1 Log into the ISE." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure the AAA Server for Cisco TrustSec Integration", "cmd": "Configure the AAA Server for Cisco TrustSec Integration", "desc": "Step 1 Configure the AAA Server for Cisco TrustSec Integration, on page 78 Step 2 Import a PAC File, on page 80 Step 3 Configure the Security Exchange Protocol, on page 81 Access Control" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "crypto ca trustpoint name", "cmd": "crypto ca trustpoint name", "desc": "Step 1 Create a trustpoint for the Cisco Umbrella registration server." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure the Umbrella Connector Global Settings", "cmd": "Configure the Umbrella Connector Global Settings", "desc": "Step 1 Enter Umbrella configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Interface inside:", "cmd": "Interface inside:", "desc": "Step 1 Edit the preset_dns_map inspection policy map and enter parameter configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "DNS policy map.", "cmd": "DNS policy map.", "desc": "Step 1 Remove the global default DNS inspection." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure Application Visibility and Control", "cmd": "Configure Application Visibility and Control", "desc": "Step 1 Configure the Carrier license and ensure that your Smart License account is enabled for export-controlled features." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "show object-group network-service _avc_visibility_nsg_ detail | include hitcnt=[1-9]", "cmd": "show object-group network-service _avc_visibility_nsg_ detail | include hitcnt=[1-9]", "desc": "Step 1 Collect the list of network-service object names for the applications you want to treat in a like manner." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "access-list access_list_name [line line_number] extended {deny | permit} protocol_argument", "cmd": "access-list access_list_name [line line_number] extended {deny | permit} protocol_argument", "desc": "Add the AVC-based access control rule to the appropriate ACL." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "show avc status", "cmd": "show avc status", "desc": "Step 1 Start the VDB download." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Service-policy: global_policy", "cmd": "Service-policy: global_policy\nClass-map: inspection_default", "desc": "Step 1 Verify that DNS inspection is enabled and that it has a non-zero packet count." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "ACL", "title": "Objects, on page 143 .", "cmd": "Objects, on page 143 .\nConfigure Attributes for vCenter Virtual Machines", "desc": "Step 1 Assign custom attribute types and values to your managed virtual machines." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "ACL", "title": "Firewall Services for Virtual Environments", "cmd": "Firewall Services for Virtual Environments\nConfigure a VM Attribute Agent", "desc": "Step 1 Select the virtual machine from your vCenter inventory." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "Configure Dynamic Network Object NAT", "cmd": "Configure Dynamic Network Object NAT", "desc": "Step 1 Create a host or range network object (object network command), or a network object group (object-group network command), for the mapped addresses." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "Configure Dynamic Twice NAT", "cmd": "Configure Dynamic Twice NAT", "desc": "Step 1 Create host or range network objects (object network command), or network object groups (object-group network command), for the source real addresses, the source mapped addresses, the destination real addresses, and the destination mapped addresses." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "Configure Dynamic Network Object PAT", "cmd": "Configure Dynamic Network Object PAT", "desc": "Step 1 (Optional." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "nat [(real_ifc,mapped_ifc)] [line | after-auto [line]] source dynamic {real-obj | any} {mapped_obj [interface", "cmd": "nat [(real_ifc,mapped_ifc)] [line | after-auto [line]] source dynamic {real-obj | any} {mapped_obj [interface", "desc": "Step 1 Create host or range network objects (object network command), or network object groups (object-group network command), for the source real addresses, the source mapped addresses, the destination real addresses, and the destination mapped addresses." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "Configure PAT with Port Block Allocation", "cmd": "Configure PAT with Port Block Allocation", "desc": "Step 1 (Optional." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "NAT automatically translates the secondary ports.", "cmd": "NAT automatically translates the secondary ports.", "desc": "Create a permit or deny per-session PAT rule." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "Configure Static Network Object NAT or Static NAT-with-Port-Translation", "cmd": "Configure Static Network Object NAT or Static NAT-with-Port-Translation", "desc": "Step 1 (Optional." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "Configure Identity Network Object NAT", "cmd": "Configure Identity Network Object NAT", "desc": "Step 1 (Optional." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "Configure Identity Twice NAT", "cmd": "Configure Identity Twice NAT", "desc": "Step 1 Create host or range network objects (object network command), or network object groups (object-group network command), for the source real addresses (you will typically use the same object for the source mapped addresses), the destination real addresses, and the destinati…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "HTTP port to itself.", "cmd": "HTTP port to itself.", "desc": "Step 1 Create a network object for the FTP server and configure static NAT with port translation, mapping the FTP port to itself." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "NAT64/46 Example: Inside IPv6 Network with Outside IPv4 Internet and DNS Translation", "cmd": "NAT64/46 Example: Inside IPv6 Network with Outside IPv4 Internet and DNS Translation", "desc": "Step 1 Create a network object for the inside IPv6 network." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "NAT in Routed and Transparent Mode", "cmd": "NAT in Routed and Transparent Mode", "desc": "Step 1 Add a network object for the inside network: hostname(config)# object network myInsideNetwork hostname(config-network-object)# subnet 10." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "NAT66: Translating IPv6 Addresses to Different IPv6 Addresses", "cmd": "NAT66: Translating IPv6 Addresses to Different IPv6 Addresses", "desc": "Step 1 Create a network object for the inside IPv6 network and add the NAT64 rule." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "NAT66 Example, Simple IPv6 Interface PAT", "cmd": "NAT66 Example, Simple IPv6 Interface PAT", "desc": "Create the network object for the inside IPv6 network and add the static NAT rule." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "DNS Reply Modification, DNS Server, Host, and Server on Separate Networks", "cmd": "DNS Reply Modification, DNS Server, Host, and Server on Separate Networks", "desc": "Step 1 Create a network object for the FTP server." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "NAT", "title": "NAT46.", "cmd": "NAT46.", "desc": "Step 1 Create a network object for the FTP server and configure static NAT with DNS modification." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "Configure MAP-T Domains", "cmd": "Configure MAP-T Domains", "desc": "Step 1 Create (or edit) the MAP domain." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "QoS", "title": "Configure Service Policies", "cmd": "Configure Service Policies", "desc": "Step 1 Identify the traffic on which you want to act by creating Layer 3/4 class maps, as described in Identify Traffic (Layer 3/4 Class Maps), on page 254." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "QoS", "title": "description string", "cmd": "description string", "desc": "Step 1 Create a Layer 3/4 class map: class-map class_map_name Where class_map_name is a string up to 40 characters in length." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "object.", "cmd": "object.", "desc": "Step 1 Test a regular expression to make sure it matches what you think it will match: test regex input_text regular_expression Where the input_text argument is a string you want to match using the regular expression, up to 201 characters in length." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure a DCERPC Inspection Policy Map", "cmd": "Configure a DCERPC Inspection Policy Map", "desc": "Step 1 (Optional) Create a DCERPC inspection class map." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure DNS Inspection Policy Map", "cmd": "Configure DNS Inspection Policy Map", "desc": "Step 1 (Optional) Create a DNS inspection class map by performing the following steps." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure an FTP Inspection Policy Map", "cmd": "Configure an FTP Inspection Policy Map", "desc": "Step 1 (Optional) Create an FTP inspection class map by performing the following steps." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure an HTTP Inspection Policy Map", "cmd": "Configure an HTTP Inspection Policy Map", "desc": "Step 1 (Optional) Create an HTTP inspection class map by performing the following steps." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "IP Options Inspection", "cmd": "IP Options Inspection", "desc": "Step 1 (Optional) Create an IM inspection class map by performing the following steps." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "IPsec Pass Through Inspection", "cmd": "IPsec Pass Through Inspection", "desc": "Step 1 Create an IP options inspection policy map: policy-map type inspect ip-options policy_map_name Where the policy_map_name is the name of the policy map." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "IPv6 Inspection", "cmd": "IPv6 Inspection", "desc": "Step 1 Create an IPsec Pass Through inspection policy map: policy-map type inspect ipsec-pass-thru policy_map_name Where the policy_map_name is the name of the policy map." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure an IPv6 Inspection Policy Map", "cmd": "Configure an IPv6 Inspection Policy Map", "desc": "Step 1 Create an IPv6 inspection policy map: policy-map type inspect ipv6 policy_map_name Where the policy_map_name is the name of the policy map." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "policy-map type inspect esmtp _default_esmtp_map", "cmd": "policy-map type inspect esmtp _default_esmtp_map\ndescription Default ESMTP policy-map", "desc": "Step 1 Create a NetBIOS inspection policy map: policy-map type inspect netbios policy_map_name Where the policy_map_name is the name of the policy map." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure an ESMTP Inspection Policy Map", "cmd": "Configure an ESMTP Inspection Policy Map", "desc": "Step 1 Create an ESMTP inspection policy map: policy-map type inspect esmtp policy_map_name Where the policy_map_name is the name of the policy map." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "TCP and UDP connections on that port.", "cmd": "TCP and UDP connections on that port.\nNAT or PAT of Sun RPC payload information is not supported.", "desc": "Create an SNMP map." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "VXLAN Inspection", "cmd": "VXLAN Inspection", "desc": "Step 1 Configure the Sun RPC service properties." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure H.323 Inspection Policy Map", "cmd": "Configure H.323 Inspection Policy Map", "desc": "Step 1 (Optional) Create an H." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure an MGCP Inspection Policy Map", "cmd": "Configure an MGCP Inspection Policy Map", "desc": "Step 1 To create an MGCP inspection policy map: policy-map type inspect mgcp policy_map_name Where the policy_map_name is the name of the policy map." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure RTSP Inspection Policy Map", "cmd": "Configure RTSP Inspection Policy Map", "desc": "Step 1 (Optional) Create an RTSP inspection class map by performing the following steps." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure SIP Inspection Policy Map", "cmd": "Configure SIP Inspection Policy Map", "desc": "Step 1 (Optional) Create a SIP inspection class map by performing the following steps." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure a Skinny (SCCP) Inspection Policy Map", "cmd": "Configure a Skinny (SCCP) Inspection Policy Map", "desc": "Step 1 Create an SCCP inspection policy map: policy-map type inspect skinny policy_map_name Where the policy_map_name is the name of the policy map." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure a GTP Inspection Policy Map", "cmd": "Configure a GTP Inspection Policy Map", "desc": "Step 1 (Optional." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure Global Timeouts", "cmd": "Configure Global Timeouts", "desc": "Step 1 Configure Global Timeouts, on page 399." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "bandwidth", "cmd": "bandwidth", "desc": "Step 1 Determine the Queue and TX Ring Limits for a Priority Queue, on page 436." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "priority-queue interface_name", "cmd": "priority-queue interface_name", "desc": "Step 1 Create the priority queue for the interface." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Security", "title": "Configure Basic Threat Detection Statistics", "cmd": "Configure Basic Threat Detection Statistics", "desc": "Step 1 Configure Basic Threat Detection Statistics, on page 449." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Security", "title": "threat-detection basic-threat", "cmd": "threat-detection basic-threat", "desc": "Step 1 Enable basic threat detection statistics (if you previously disabled it)." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Security", "title": "threat-detection statistics", "cmd": "threat-detection statistics", "desc": "Step 1 (Optional) Enable all statistics." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Security", "title": "threat-detection scanning-threat [shun [except {ip-address ip_address mask | object-group", "cmd": "threat-detection scanning-threat [shun [except {ip-address ip_address mask | object-group", "desc": "Step 1 Enable scanning threat detection." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Security", "title": "threat-detection service remote-access-authentication hold-down minutes threshold count", "cmd": "threat-detection service remote-access-authentication hold-down minutes threshold count", "desc": "Step 1 Enable threat detection for remote access VPN authentication failures." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "IPsec and ISAKMP", "cmd": "IPsec and ISAKMP", "desc": "Step 1 To create an IKE policy, enter the crypto ikev1 | ikev2 policy command from global configuration mode in either single or multiple context mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto isakmp nat-traversal natkeepalive", "cmd": "crypto isakmp nat-traversal natkeepalive", "desc": "Step 1 Enter the following command to enable IPsec over NAT-T globally on the ASA:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "tunnel-group-map enable {rules | ou | ike-id | peer ip}", "cmd": "tunnel-group-map enable {rules | ou | ike-id | peer ip}\ntunnel-group-map [rule-index] enable policy", "desc": "Step 1 To configure the policy and rules by which certificate-based ISAKMP sessions map to tunnel groups, and to associate the certificate map entries with tunnel groups, enter the tunnel-group-map command in either single or multiple context mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto ipsec ike_version transform-set transform_name ESP_Encryption_Type ESP_Authentication_Type", "cmd": "crypto ipsec ike_version transform-set transform_name ESP_Encryption_Type ESP_Authentication_Type", "desc": "Step 1 Create a transform set with a specific ESP encryption type and authentication type." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto ikev1 policy number", "cmd": "crypto ikev1 policy number", "desc": "Step 1 Display the attributes and the number of any existing IKE policies." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "interface for VPN load balancing for this device:", "cmd": "interface for VPN load balancing for this device:", "desc": "Step 1 Configure the public interface on the ASA by entering the interface command with the lbpublic keyword in vpn-load-balancing configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "vpn load-balancing", "cmd": "vpn load-balancing", "desc": "Step 1 Set up VPN load balancing by entering the vpn load-balancing command in global configuration mode: Example: hostname(config)# vpn load-balancing hostname(config-load-balancing)# This enters vpn-load-balancing configuration mode, in which you can configure the remaining loa…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "DNS server).", "cmd": "DNS server).", "desc": "Step 1 Enable the use of FQDNs for VPN load balancing." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Configure VPN Session Limits", "cmd": "Configure VPN Session Limits", "desc": "Step 1 In global configuration mode, enter tunnel general." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto engine accelerator-bias", "cmd": "crypto engine accelerator-bias", "desc": "Specify how to allocate crypto accelerator processors:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Configure the Management VPN Tunnel", "cmd": "Configure the Management VPN Tunnel", "desc": "Step 1 Define the custom attribute type in theWebVPN context with the following command:anyconnect-custom-attr dynamic-split-exclude-domains description dynamic split exclude domains Step 2 Define the custom attribute names for each cloud/web service that needs access by the clie…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "group-policy MgmtTunGrpPolicy attributes", "cmd": "group-policy MgmtTunGrpPolicy attributes\nwebvpn", "desc": "Step 1 Add the uploaded profile (profileMgmt) to the group policy (MgmtTunGrpPolicy) mapped to the tunnel group used by the management tunnel connection: To indicate the profile is the AnyConnectManagement VPNProfile, include type vpn-mgmt on the anyconnect profiles command." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Configure RADIUS Server Groups for ISE Policy Enforcement", "cmd": "Configure RADIUS Server Groups for ISE Policy Enforcement", "desc": "Step 1 Create the RADIUS AAA server group." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Configure Advanced SSL Settings", "cmd": "Configure Advanced SSL Settings", "desc": "Step 1 Set the minimum protocol version for which the ASA will negotiate a connection." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "tunnel-group tunnel_group_name type remote-access", "cmd": "tunnel-group tunnel_group_name type remote-access", "desc": "Create the connection profile, specifying its name and type, by entering the tunnel-group command." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure Remote-Access Connection Profile IPsec IKEv1 Attributes", "cmd": "Configure Remote-Access Connection Profile IPsec IKEv1 Attributes", "desc": "Step 1 To specify the IPsec attributes of an remote-access tunnel-group, enter tunnel-group ipsec-attributes mode by entering the following command in either single or multiple context mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure IPsec Remote-Access Connection Profile PPP Attributes", "cmd": "Configure IPsec Remote-Access Connection Profile PPP Attributes", "desc": "Step 1 Enter tunnel-group ppp-attributes configuration mode, in which you configure the remote-access tunnel-group PPP attributes, by entering the following command." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "tunnel-group tunnel-group-name general-attributes", "cmd": "tunnel-group tunnel-group-name general-attributes", "desc": "Step 1 Enter tunnel-group general-attributes mode by specifying the general-attributes keyword in either single or multiple context mode:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure LAN-to-LAN IPsec IKEv1 Attributes", "cmd": "Configure LAN-to-LAN IPsec IKEv1 Attributes", "desc": "Step 1 To configure the tunnel-group IPsec IKEv1 attributes, enter tunnel-group ipsec-attributes configuration mode by entering the tunnel-group command with the IPsec-attributes keyword in either single or multiple context mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Password Policy. Select Minimum password length.", "cmd": "Password Policy. Select Minimum password length.", "desc": "Step 1 Choose Start > Programs > Administrative Tools > Active Directory Users and Computers." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "password must contain.", "cmd": "password must contain.", "desc": "Step 1 Chose Start > Programs > Administrative Tools > Domain Security Policy." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "group-policy DfltGrpPolicy {internal | external}, you cannot change its type to external.", "cmd": "group-policy DfltGrpPolicy {internal | external}, you cannot change its type to external.", "desc": "Step 1 Configure a connection profile (tunnel group) to forward RADIUS reply messages in a manner that simulates direct communication with an SDI server using the proxy-auth sdi command from tunnel-group webvpn configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "Configure General Internal Group Policy Attributes", "cmd": "Configure General Internal Group Policy Attributes", "desc": "To configure an external group policy, perform the following step and specify a name and type for the group policy, along with the server-group name and a password: hostname(config)# group-policy group_policy_name type server-group server_group_name password server_password hostn…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Firewall", "title": "group-policy value attributes", "cmd": "group-policy value attributes", "desc": "Step 1 Enter group policy configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Configure IPv6 Address Assignments", "cmd": "Configure IPv6 Address Assignments", "desc": "Enable an address assignment method for the ASA to use when assigning IPv4 address to VPN connections." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "IP Addresses for VPNs", "cmd": "IP Addresses for VPNs", "desc": "Enable an address assignment method for the ASA to use when assigning IPv6 address to VPN connections." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "ip local poolpoolname first_address-last_addressmaskmask", "cmd": "ip local poolpoolname first_address-last_addressmaskmask", "desc": "Step 1 Configure IP address pools as the address assignment method." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "ipv6 local pool pool_name starting_address prefix_length number_of_addresses", "cmd": "ipv6 local pool pool_name starting_address prefix_length number_of_addresses", "desc": "Step 1 Configures IP address pools as the address assignment method, enter the ipv6-vpn-addr-assign command with the local argument." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "tunnel-group firstgroup type remote-access", "cmd": "tunnel-group firstgroup type remote-access", "desc": "Step 1 Configure IP address pools as the address assignment method." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "interface {interface}", "cmd": "interface {interface}", "desc": "Step 1 Enter interface configuration mode from global configuration mode:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Configure an Address Pool", "cmd": "Configure an Address Pool", "desc": "Step 1 Specify the authentication method and the set of parameters to use during IKEv1 negotiation." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "ip local pool poolname first-address—last-address [mask mask]", "cmd": "ip local pool poolname first-address—last-address [mask mask]", "desc": "Create an address pool with a range of IP addresses, from which the ASA assigns addresses to the clients." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "username name {nopassword | password password [mschap | encrypted | nt-encrypted]} [privilege", "cmd": "username name {nopassword | password password [mschap | encrypted | nt-encrypted]} [privilege", "desc": "Create a user and password and privilege level for the user:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto ipsec ikev1 transform-set transform-set-name encryption-method [authentication]", "cmd": "crypto ipsec ikev1 transform-set transform-set-name encryption-method [authentication]", "desc": "Step 1 Configure an IKEv1 transform set that specifies the IPsec IKEv1 encryption and hash algorithms to be used to ensure data integrity." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "tunnel-group name type type", "cmd": "tunnel-group name type type", "desc": "Step 1 Create an IPsec remote access tunnel-group (also called connection profile):" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto dynamic-map dynamic-map-name seq-num set ikev1 transform-set transform-set-name", "cmd": "crypto dynamic-map dynamic-map-name seq-num set ikev1 transform-set transform-set-name", "desc": "Step 1 Create a dynamic crypto map and specifies an IKEv1 transform set or IKEv2 proposal for the map: • For IKEv1, use this command:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto map map-name seq-num ipsec-isakmp dynamic dynamic-map-name", "cmd": "crypto map map-name seq-num ipsec-isakmp dynamic dynamic-map-name", "desc": "Step 1 Create a crypto map entry that uses a dynamic crypto map:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "tunnel-group name ipsec-attributes", "cmd": "tunnel-group name ipsec-attributes", "desc": "Step 1 Configure the IPsec attributes of the tunnel group." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "webvpn", "cmd": "webvpn", "desc": "Step 1 Enter the clientless SSL VPN configuration mode using the following command:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "object-group geolocation {object-group-name}", "cmd": "object-group geolocation {object-group-name}", "desc": "Step 1 Create a geolocation object group to define locations in global configuration mode:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "context context1", "cmd": "context context1", "desc": "Step 1 To configure the VPN in multi-mode, configure a resource class and choose VPN licenses as part of the allowed resource." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Configure ISAKMP Policies for IKEv2 Connections", "cmd": "Configure ISAKMP Policies for IKEv2 Connections\nConfigure ISAKMP Policies for IKEv2 Connections", "desc": "Step 1 Enter IPsec IKEv1 policy configuration mode." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto ikev2 policy policy_index", "cmd": "crypto ikev2 policy policy_index", "desc": "Step 1 Create an IKEv2 policy." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "crypto ipsec ikev1 transform-set transform-set-nameencryption-method authentication-method", "cmd": "crypto ipsec ikev1 transform-set transform-set-nameencryption-method authentication-method", "desc": "Step 1 In global configuration mode enter the crypto ipsec ikev1 transform-set command." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Configure an ACL", "cmd": "Configure an ACL", "desc": "Step 1 In global configuration mode, use the crypto ipsec ikev2 ipsec-proposal command to enter ipsec proposal configuration mode where you can specify multiple encryption and integrity types for the proposal." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "access-list listname extended permit ip source-ipaddress source-netmask destination-ipaddress", "cmd": "access-list listname extended permit ip source-ipaddress source-netmask destination-ipaddress", "desc": "Step 1 Enter the access-list extended command." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Configure Dynamic Site-to-Site VPN Using a Loopback Interface", "cmd": "Configure Dynamic Site-to-Site VPN Using a Loopback Interface", "desc": "Step 1 Configure the outside interface using the interface command: a) Configure the name of the loopback interface using the nameif command." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Enable Secure Client Profile Downloads", "cmd": "Enable Secure Client Profile Downloads", "desc": "You can enable the ASA to prompt remote SSL VPN client users to download the client with the anyconnect ask command from group policy webvpn or username webvpn configuration modes: [no] anyconnect ask {none | enable [default {webvpn | } timeout value]} • anyconnect enable prompts…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Enable Secure Client Deferred Upgrade", "cmd": "Enable Secure Client Deferred Upgrade", "desc": "Step 1 Use the profile editor from ASDM/ISE or the standalone profile editor to create a profile." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Enable DSCP Preservation", "cmd": "Enable DSCP Preservation", "desc": "Step 1 Create the custom attribute types with the anyconnnect-custom-attr command in webvpn configuration mode: [no] anyconnect-custom-attr attr-type [description description ] Example: AnyConnect VPN Client Connections" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Enable Additional Secure Client Features", "cmd": "Enable Additional Secure Client Features", "desc": "Step 1 Create the custom attribute types with the anyconnect-custom-attrcommand in webvpn configuration mode: [no] anyconnect-custom-attr DSCPPreservationAllowed description Set to control Differentiated Services Code Point (DSCP) on Windows or OS X platforms for DTLS connections…" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "privileged EXEC mode.", "cmd": "privileged EXEC mode.", "desc": "Step 1 Export a translation table template to a computer with the export webvpn translation-table command from" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "hostname (config-username-webvpn #", "cmd": "hostname (config-username-webvpn #", "desc": "Step 1 Go to the desired group policy." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Enable IPv6 VPN Access", "cmd": "Enable IPv6 VPN Access", "desc": "Step 1 Copy the new client images to the ASA using the copy command from privileged EXEC mode, or using another method." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "interface GigabitEthernet0/0", "cmd": "interface GigabitEthernet0/0\nnameif outside\nsecurity-level 0\nip address 192.168.0.1 255.255.255.0\nipv6 enable ; Needed for IPv6.", "desc": "Step 1 Configure Interfaces:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Configure a SAML 2.0 Identity Provider (IdP)", "cmd": "Configure a SAML 2.0 Identity Provider (IdP)", "desc": "Step 1 Create a SAML identity provider in webvpn config mode and enter saml-idp sub-mode under webvpn." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Configure Certificate and SAML Authentication", "cmd": "Configure Certificate and SAML Authentication", "desc": "Step 1 In webvpn sub-mode, use the anyconnect external-browser-pkg command to enable AnyConnect SAML authentication through the operating system's default browser." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "VPN", "title": "Trustpoint CA certificate accepted.", "cmd": "Trustpoint CA certificate accepted.", "desc": "Step 1 To configure certificate and SAML authentication, enter tunnel-group webvpn-attributes mode by entering the following command." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "System", "title": "show webvpn hostscan", "cmd": "show webvpn hostscan", "desc": "Show the version of HostScan/Secure Firewall Posture enabled on the ASA." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "crypto ipsec ikev1 transform-set {transform-set-name | encryption | authentication}", "cmd": "crypto ipsec ikev1 transform-set {transform-set-name | encryption | authentication}", "desc": "Add an IKEv1 transform set, or an IKEv2 IPsec proposal to establish the security association." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "crypto ipsec profile name", "cmd": "crypto ipsec profile name", "desc": "Step 1 Set a name for the profile:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "interface tunnel tunnel_interface_number", "cmd": "interface tunnel tunnel_interface_number", "desc": "Step 1 Create a new tunnel interface:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "Interfaces", "title": "interface virtual-Template template_number type tunnel", "cmd": "interface virtual-Template template_number type tunnel", "desc": "Step 1 Create a new virtual template:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "AAA", "title": "username-from-certificate-choice {first-certificate | second-certificate}", "cmd": "username-from-certificate-choice {first-certificate | second-certificate}", "desc": "Step 1 Specify whether to use the primary username from the first or second certificate:" }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "AAA", "title": "tunnel-group groupname", "cmd": "tunnel-group groupname", "desc": "Step 1 Create a AAA server group." }, { "os": "asa", "role": "firewall", "vendor": "Cisco", "cat": "AAA", "title": "Configure an External AAA Server for VPN", "cmd": "Configure an External AAA Server for VPN", "desc": "Step 1 Right-click the username, open the Properties dialog box then the General tab and enter banner text in the Office field, which uses the AD/LDAP attribute physicalDeliveryOfficeName." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "activate (bmp)", "cmd": "Device> enable\nDevice# configure terminal\nDevice(config)# router bgp 65000\nDevice(config-router)# bmp server 1\nDevice(config-router-bmpsrvr)# activate\nDevice(config-router-bmpsrvr)# exit-bmp-server-mode\nDevice(config-router)# bmp server 2\nDevice(config-router-bmpsrvr)# activate\nDevice(config-router-bmpsrvr)# end\nDevice# show ip bgp bmp server 1\nDevice# show ip bgp bmp server 2\nshow ip bgp bmp Displays information about BMP servers and neighbors.", "desc": "To initiate a connection between BGPmonitoring protocol (BMP) server and BGP neighbors, use the activate command in BMP server configuration mode. To stop the connection, use the no form of the comman" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "add-paths", "cmd": "Device(config)# router eigrp name\nDevice(config-router)# address-family ipv4 autonomous-system 2\nDevice(config-router-af)# af-interface tunnel0\nDevice(config-router-af-interface)# no next-hop-self no-ecmp-mode\nDevice(config-router-af-interface)# add-paths 3\nDevice(config-router-af-interface)# end\nDevice# configure terminal\nDevice(config)# ipv6 unicast-routing\nDevice(config)# router eigrp name\nDevice(config-router)# address-family ipv6 autonomous-system 2\nDevice(config-router-af)# af-interface tunnel0\nDevice(config-router-af-interface)# no next-hop-self no-ecmp-mode", "desc": "To enable the Enhanced Interior Gateway Routing Protocol (EIGRP) to advertise multiple best paths to connected spokes in a Dynamic Multipoint VPN (DMVPN) domain, use the add-paths command in address f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ais-core-failure", "cmd": "Router> enable\nRouter(config)# alarm-interface 5\nRouter(config-aic)# ip address 10.2.130.105\nRouter(config-aic)# reset\nRouter(config-aic)# end\nRouter> enable\nRouter# configure terminal\nRouter(config)# interface tengigabitethernet 2/1\nRouter(config-if)# als\nRouter> enable\nRouter# configure terminal\nRouter(config)# interface tengigabitethernet 2/1", "desc": "To enable AIS alarms to detect core failure events on a 8/16 T1E1 IM, use the ais-core-failure command in controller configuration mode. To disable the AIS alarms, use the no form of this command.. Sy" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ais-core-failure", "cmd": "Router> enable\nRouter#configure terminal\nRouter(config)#controller t1 0/1/2\nRouter(config-controller)#ais-core-failure\nRouter(config)# alarm-interface 5\nRouter(config-aic)# ip address 10.2.130.105\nRouter(config-aic)# reset\nRouter(config-aic)# end\nrouter(config)#alarm profile CHASSIS chassis\nrouter(config-alarm-profile)#alarm sonet/sdh", "desc": "To enable AIS alarms to detect core failure events on a 8/16 T1E1 IM, use the ais-core-failure command in controller configuration mode. To disable the AIS alarms, use the no form of this command.. Sy" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "additional-paths", "cmd": "additional-paths\nno additional-paths", "desc": "To use a policy template to configure BGP to send or receive additional paths, use the additional-paths command in policy template configuration mode. To remove the policy from the current template, u" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "address-family ipv4 (BGP)", "cmd": "Device(config)# router bgp 50000\nDevice(config-router)# address-family ipv4\nDevice(config-router-af)#\nDevice(config)# router bgp 50000\nDevice(config-router)# address-family ipv4 multicast\nDevice(config-router-af)#\nDevice(config)# router bgp 50000\nDevice(config-router)# address-family ipv4 unicast\nDevice(config-router-af)#\nDevice(config)# router bgp 50000", "desc": "To enter address family or router scope address family configuration mode to configure a routing session using standard IP Version 4 (IPv4) address prefixes, use the address-family ipv4 command in rou" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "address-family l2vpn", "cmd": "address-family l2vpn", "desc": "To enter address family configuration mode to configure a routing session using Layer 2 Virtual Private" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "address-family mvpn", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# address-family ipv4 mvpn\nRouter(config-router-af)#", "desc": "To enter address family configuration mode to configure a routing session using multicast VPN (MVPN) address information, use the address-family mvpn command in router configuration mode. To exit addr" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "address-family nsap", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# address-family nsap\nRouter(config-router-af)#", "desc": "To enter address family configuration mode to configure Connectionless Network Service (CLNS)-specific parameters for Border Gateway Protocol (BGP) routing sessions, use the address-family nsap comman" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "address-family rtfilter unicast", "cmd": "address-family rtfilter unicast", "desc": "To enter address family configuration mode and to enable Route Target Constrain (RTC) with a Border" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "address-family vpnv4", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# address-family vpnv4\nRouter(config-router-af)#\nRouter(config)# router bgp 50000\nRouter(config-router)# address-family vpnv4 unicast\nRouter(config-router-af)#\nRouter(config)# router bgp 50000\nRouter(config-router)# address-family vpnv4 multicast\nRouter(config-router-af)#", "desc": "To enter address family configuration mode to configure a routing session using Virtual Private Network (VPN) Version 4 address prefixes, use the address-family vpnv4 command in router configuration m" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "advertise additional-paths", "cmd": "advertise additional-paths\nadvertise additional-paths [best number] [group-best] [all]\nno advertise additional-paths [best number] [group-best] [all]", "desc": "To advertise additional paths for a BGP peer policy template based on selection, use the advertise additional-paths command in peer policy template configuration mode. To prevent the advertisement of " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "aggregate-address", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# aggregate-address 10.0.0.0 255.0.0.0 as-set\nRouter(config)# router bgp 50000\nRouter(config-router)# address-family ipv4 multicast\nRouter(config-router-af)# aggregate-address 10.0.0.0 255.0.0.0 summary-only\nRouter(config)# ip as-path access-list 1 deny ^1234_\nRouter(config)# ip as-path access-list 1 permit .*\nRouter(config)# !\nRouter(config)# route-map MAP-ONE\nRouter(config-route-map)# match ip as-path 1", "desc": "To create an aggregate entry in a Border Gateway Protocol (BGP) database, use the aggregate-address command in address family or router configuration mode. To disable this function, use the no form of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "aigp", "cmd": "Device# configure terminal\nDevice(config)# router bgp 65000\nDevice(config-router)# address-family ipv4 unicast\nDevice(config-router-af)# neighbor 10.1.1.1 aigp\nDevice(config-router-af)# exit", "desc": "To enable sending and receiving of the accumulated interior gateway protocol (AIGP) attribute per external" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "autodiscovery (MPLS)", "cmd": "Device(config)# l2vpn vfi context vfi1\nDevice(config-vfi)# vpn id 100\nDevice(config-vfi)# autodiscovery bgp signaling ldp\nDevice(config-vfi-autodiscovery)#", "desc": "To designate a Layer 2 virtual forwarding interface (VFI) as having Border Gateway Protocol (BGP) or Label" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "auto-summary (BGP)", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# address-family ipv4 unicast\nRouter(config-router-af)# auto-summary\nRouter(config-router-af)# network 7.7.7.7 255.255.255.255\nRouter# show ip interface brief\nRouter# show ip bgp", "desc": "To configure automatic summarization of subnet routes into network-level routes, use the auto-summary command in address family or router configuration mode. To disable automatic summarization and sen" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp additional-paths", "cmd": "Device(config)# router bgp 65000\nDevice(config-router)# address-family ipv6 unicast\nDevice(config-router-af)# no bgp additional-paths send receive", "desc": "To configure BGP to send or receive additional paths (for all neighbors in the address family), use the bgp additional-paths command in address family configuration mode. To disable the sending or rec" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp additional-paths install", "cmd": "Router(config-router-af)# bgp additional-paths install", "desc": "To enable Border Gateway Protocol (BGP) to calculate a backup path for a given address family and to install it into the Routing Information Base (RIB) and Cisco Express Forwarding, use the bgp additi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp additional-paths select (additional paths)", "cmd": "bgp additional-paths select (additional paths)\nno bgp additional-paths select [best number] [group-best] [all]", "desc": "To have the system calculate BGP additional paths that can be candidates for advertisement in addition to a bestpath, use the bgp additional-paths select command in address family configuration mode. " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp additional-paths select (diverse path)", "cmd": "bgp additional-paths select (diverse path)\nno bgp additional-paths select", "desc": "To have the system calculate a second Border Gateway Protocol (BGP) best path, use the bgp additional-paths select command in address family configuration mode. To remove this mechanism for calculatin" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp advertise-best-external", "cmd": "Router(config-router-af)# bgp advertise-best-external", "desc": "To enable Border Gateway Protocol (BGP) to calculate an external route as the best backup path for a given address family and to install it into the Routing Information base (RIB) and Cisco Express Fo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp aggregate-timer", "cmd": "Router(config)# router bgp 50\nRouter(config-router)# bgp aggregate-timer 20\nRouter(config)# router bgp 50\nRouter(config-router)# aggregate-address 10.0.0.0 255.0.0.0 summary-only\nRouter(config-router)# bgp aggregate-timer 0", "desc": "To set the interval at which BGP routes will be aggregated or to disable timer-based route aggregation, use the bgp aggregate-timer command in address-family or router configuration mode. To restore t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp always-compare-med", "cmd": "Router(config)# router bgp 500000\nRouter(config-router)# bgp always-compare-med", "desc": "To enable the comparison of the Multi Exit Discriminator (MED) for paths from neighbors in different autonomous systems, use the bgp always-compare-med command in router configurationmode. To disallow" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp asnotation dot", "cmd": "Router# show ip bgp summary\nRouter# show ip bgp summary\nRouter# show ip bgp regexp ^65536$\nRouter# show ip bgp regexp ^1\\.0$", "desc": "To change the default display and regular expression match format of Border Gateway Protocol (BGP) 4-byte autonomous system numbers from asplain (decimal values) to dot notation, use the bgp asnotatio" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp bestpath aigp ignore", "cmd": "Device# configure terminal\nDevice(config)# router bgp 50000\nDevice(config-router)# bgp bestpath aigp ignore\nDevice(config-router)# exit", "desc": "To configure a device that is running the Border Gateway Protocol (BGP) to not evaluate the accumulated interior gateway protocol (AIGP) attribute during the best path selection process between two pa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp bestpath as-path ignore", "cmd": "Router(config)# router bgp 40000\nRouter(config-router)# bgp bestpath as-path ignore", "desc": "To configure Border Gateway Protocol (BGP) to not consider the autonomous system (AS) path during best path route selection, use the bgp bestpath as-path ignore command in router configuration mode. T" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp bestpath compare-routerid", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# bgp bestpath compare-routerid", "desc": "To configure a Border Gateway Protocol (BGP) routing process to compare identical routes received from different external peers during the best path selection process and to select the route with the " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp bestpath cost-community ignore", "cmd": "bgp bestpath cost-community ignore\nbgp bestpath cost-community ignore\nno bgp bestpath cost-community ignore", "desc": "To configure a router that is running the Border Gateway Protocol (BGP) to not evaluate the cost community attribute during the best path selection process, use the bgp bestpath cost-community ignore " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp bestpath igp-metric ignore", "cmd": "bgp bestpath igp-metric ignore\nbgp bestpath igp-metric ignore\nno bgp bestpath igp-metric ignore", "desc": "To specify that the system ignore the Interior Gateway Protocol (IGP) metric during Border Gateway Protocol (BGP) best path selection, use the bgp bestpath igp-metric ignore command in address family " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp bestpath med confed", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# bgp bestpath med confed", "desc": "To configure a Border Gateway Protocol (BGP) routing process to compare the Multi Exit Discriminator (MED) between paths learned from confederation peers, use the bgp bestpath med confed command in ro" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp bestpath med missing-as-worst", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# bgp bestpath med missing-as-worst", "desc": "To configure a Border Gateway Protocol (BGP) routing process to assign a value of infinity to routes that are missing theMulti Exit Discriminator (MED) attribute (making the path without aMED value th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp bestpath prefix-validate", "cmd": "bgp bestpath prefix-validate\nbgp bestpath prefix-validate {disable | allow-invalid}\nno bgp bestpath prefix-validate {disable | allow-invalid}", "desc": "To disable the validation of Border Gateway Protocol (BGP) prefixes based on the autonomous system from which the prefix originates, or to allow invalid prefixes to be used as the bestpath even if val" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp client-to-client reflection", "cmd": "Device(config)# router bgp 50000\nDevice(config-router)# neighbor 10.24.95.22 route-reflector-client\nDevice(config-router)# neighbor 10.24.95.23 route-reflector-client\nDevice(config-router)# neighbor 10.24.95.24 route-reflector-client\nDevice(config-router)# no bgp client-to-client reflection\nDevice(config-router)# end", "desc": "To enable route reflection from a BGP route reflector to clients, use the bgp client-to-client reflection command in router configuration mode. To disable client-to-client route reflection, use the no" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp client-to-client reflection intra-cluster", "cmd": "Device(config)# router bgp 50000\nDevice(config-router)# bgp client-to-client reflection intra-cluster cluster-id any\nDevice(config)# router bgp 50000\nDevice(config-router)# bgp client-to-client reflection intra-cluster cluster-id 10.1.4.5\nDevice(config)# router bgp 50000\nDevice(config-router)# no bgp client-to-client reflection intra-cluster cluster-id any\nDevice(config)# router bgp 50000\nDevice(config-router)# no bgp client-to-client reflection intra-cluster cluster-id 10.1.4.5", "desc": "To enable intracluster client-to-client route reflection to clients for the specified clusters, use the bgp client-to-client reflection intra-cluster command in router configuration mode. To disable i" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp cluster-id", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# neighbor 192.168.70.24 route-reflector-client\nRouter(config-router)# bgp cluster-id 10.0.1.2", "desc": "To set the cluster ID on a route reflector in a route reflector cluster, use the bgp cluster-id command in router configuration mode. To remove the cluster ID, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp confederation identifier", "cmd": "bgp confederation identifier\nbgp confederation identifier autonomous-system-number\nno bgp confederation identifier autonomous-system-number", "desc": "To specify a BGP confederation identifier, use the bgp confederation identifier command in router configuration mode. To remove the confederation identifier, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp confederation peers", "cmd": "bgp confederation peers\nno form of this command.\nno bgp confederation peers autonomous-system-number [... autonomous-system-number]", "desc": "To configure subautonomous systems to belong to a single confederation, use the bgp confederation peers command in router configuration mode. To remove an autonomous system from the confederation, use" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp consistency-checker", "cmd": "Router(config)# router bgp 65000\nRouter(config-router)# bgp consistency-checker auto-repair", "desc": "To enable the BGP Consistency Checker feature, use the bgp consistency-checker command in router configuration mode. To disable the BGP Consistency Checker feature, use the no form of this command. bg" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp dampening", "cmd": "Router(config)# router bgp 5\nRouter(config-router)# address-family ipv4 unicast\nRouter(config-router-af)# bgp dampening 30 1500 10000 120\nRouter(config-router-af)# end\nRouter(config)# ip prefix-list RED permit 10.0.0.0/8\nRouter(config)# !\nRouter(config)# route-map BLUE\nRouter(config-route-map)# match ip address ip prefix-list RED\nRouter(config-route-map)# exit\nRouter(config)# router bgp 50000", "desc": "To enable BGP route dampening or change BGP route dampening parameters, use the bgp dampening command in address family or router configuration mode. To disable BGP dampening, use the no form of this " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp default ipv4-unicast", "cmd": "Device(config)# router bgp 50000\nDevice(config-router)# no bgp default ipv4-unicast", "desc": "To set the IP version 4 (IPv4) unicast address family as default for BGP peering session establishment, use the bgp default ipv4-unicast command in router configuration mode. To disable default IPv4 u" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp default local-preference", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# bgp default local-preference 200", "desc": "To change the default local preference value, use the bgp default local-preference command in router configurationmode. To return the local preference value to the default setting, use the no form of " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp deterministic-med", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# bgp deterministic-med\nRouter# show ip bgp 10.100.0.0\nRouter# clear ip bgp *\nRouter# show ip bgp 10.100.0.0\nRouter# show ip bgp 10.100.0.0", "desc": "To enforce the deterministic comparison of the Multi Exit Discriminator (MED) value between all paths received from within the same autonomous system, use the bgp deterministic-med command in router c" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp dmzlink-bw", "cmd": "Router(config)# router bgp 45000\nRouter(config-router)# neighbor 10.10.10.1 remote-as 100\nRouter(config-router)# neighbor 10.10.10.1 update-source Loopback 0\nRouter(config-router)# neighbor 10.10.10.3 remote-as 100\nRouter(config-router)# neighbor 10.10.10.3 update-source Loopback 0\nRouter(config-router)# neighbor 172.16.1.1 remote-as 200\nRouter(config-router)# neighbor 172.16.1.1 ebgp-multihop 1\nRouter(config-router)# neighbor 172.16.2.2 remote-as 200\nRouter(config-router)# neighbor 172.16.2.2 ebgp-multihop 1\nRouter(config-router)# address-family ipv4", "desc": "To configure BGP to distribute traffic proportionally over external links with unequal bandwidth when multipath load balancing is enabled, use the bgp dmzlink-bw command in address family configuratio" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp enforce-first-as", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# bgp enforce-first-as\nRouter(config-router)# address-family ipv4\nRouter(config-router-af)# neighbor 10.100.0.1 remote-as 65001\nRouter(config-router-af)# end", "desc": "To configure a router to deny an update received from an external BGP (eBGP) peer that does not list its autonomous system number at the beginning of the AS_PATH in the incoming update, use the bgp en" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp enhanced-error", "cmd": "bgp enhanced-error\nbgp enhanced-error\nno bgp enhanced-error", "desc": "To restore the default behavior so that any malformed Update message is treat-as-withdraw, use the bgp enhanced-error command in router configuration mode. To disable the function, use the no form of " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp fast-external-fallover", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# no bgp fast-external-fallover", "desc": "To configure a Border Gateway Protocol (BGP) routing process to immediately reset external BGP peering sessions if the link used to reach these peers goes down, use the bgp fast-external-fallover comm" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp graceful-restart", "cmd": "Router# configure terminal\nRouter(config)# router bgp 65000\nRouter(config-router)# bgp graceful-restart\nRouter# configure terminal\nRouter(config)# router bgp 65000\nRouter(config-router)# bgp graceful-restart restart-time 130\nRouter# configure terminal\nRouter(config)# router bgp 65000\nRouter(config-router)# bgp graceful-restart stalepath-time 350\nRouter# configure terminal", "desc": "To enable the Border Gateway Protocol (BGP) graceful restart capability globally for all BGP neighbors, use the bgp graceful-restart command in address family or in router configuration mode. To disab" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp inject-map", "cmd": "Router(config)# ip prefix-list ROUTE permit 10.1.1.0/24\nRouter(config)# ip prefix-list ROUTE_SOURCE permit 10.2.1.1/32\nRouter(config)# ip prefix-list ORIGINATED_ROUTES permit 10.1.1.0/25\nRouter(config)# ip prefix-list ORIGINATED_ROUTES permit 10.1.1.128/25\nRouter(config)# route-map LEARNED_PATH permit 10\nRouter(config-route-map)# match ip address prefix-list ROUTE\nRouter(config-route-map)# match ip route-source prefix-list ROUTE_SOURCE\nRouter(config-route-map)# exit\nRouter(config)# route-map ORIGINATE permit 10\nRouter(config-route-map)# set ip address prefix-list ORIGINATED_ROUTES", "desc": "To configure conditional route injection to inject more specific routes into a Border Gateway Protocol (BGP) routing table, use the bgp inject-map command in address family or router configuration mod" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp listen", "cmd": "bgp listen\npeer-group-name persistent minutes / disable ]\nno bgp listen [ block ip-address limit max-number | range network / length peer-group\npeer-group-name persistent minutes / disable ]", "desc": "To associate a subnet range with a Border Gateway Protocol (BGP) peer group and activate the BGP dynamic neighbors feature, use the bgp listen command in router configuration mode. To disable the BGP " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp log-neighbor-changes", "cmd": "Device(config)# bgp router 40000\nDevice(config-router)# bgp log-neighbor-changes", "desc": "To enable logging of BGP neighbor resets, use the bgp log-neighbor-changes command in router configuration mode. To disable the logging of changes in BGP neighbor adjacencies, use the no form of this " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp maxas-limit", "cmd": "Router(config)# router bgp 40000\nRouter(config-router-af)# bgp maxas-limit 30", "desc": "To configure Border Gateway Protocol (BGP) to discard routes that have a number of autonomous system numbers in AS-path that exceed the specified value, use the bgp maxas-limit command in router confi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp maxcommunity-limit", "cmd": "Device(config)# router bgp 40000\nDevice(config-router)# bgp maxcommunity-limit 30", "desc": "To configure Border Gateway Protocol (BGP) to allow routes that have several community attributes from any neighbor that exceed the specified value in the number of communities, use the bgp maxcommuni" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp maxextcommunity-limit", "cmd": "Device(config)# router bgp 40000\nDevice(config-router)# bgp maxextcommunity-limit 30", "desc": "To configure Border Gateway Protocol (BGP) to allow routes that have several extended community attributes from any neighbor that exceed the specified value in the number of extended communities, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp mpls-local-label", "cmd": "Device(config)# router bgp 100\nDevice(config-router)# address-family ipv4\nDevice(config-router-af)# bgp mpls-local-label", "desc": "To enable Border Gateway Protocol (BGP) local label allocation for unadvertised /32 prefixes, use the bgp mpls-local-label command in address family configuration mode. To disable BGP local label allo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp nexthop", "cmd": "bgp nexthop\nno bgp nexthop {trigger {delay | enable} | route-map map-name}", "desc": "To configure Border Gateway Protocol (BGP) next-hop address tracking, use the bgp nexthop command in address family or router configuration mode. To disable BGP next-hop address tracking, use the no f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp nexthop trigger delay", "cmd": "bgp nexthop trigger delay\nbgp nexthop trigger enable", "desc": "BGP — bgp nexthop trigger delay" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp nexthop trigger enable", "cmd": "bgp nexthop trigger enable\nbgp nopeerup-delay", "desc": "BGP — bgp nexthop trigger enable" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp nopeerup-delay", "cmd": "Router(config)# router bgp 100\nRouter(config-router)# bgp nopeerup-delay nsf-switchover 234", "desc": "To configure the time duration that Border Gateway Protocol (BGP) waits for the first peer to come up before populating the routing information base (RIB), use the bgp nopeerup-delay command in router" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp recursion host", "cmd": "Router> enable\nRouter# configure terminal\nRouter(config)# router ospf 10\nRouter(config-router)# log-adjacency-changes\nRouter(config-router)# redistribute connected subnets\nRouter(config-router)# network 192.168.0.0 0.0.255.255 area 0\nRouter(config-router)# router bgp 64500\nRouter(config-router)# no synchronization\nRouter(config-router)# bgp log-neighbor-changes\nRouter(config-router)# neighbor 10.5.5.5 remote-as 64500", "desc": "To enable the recursive-via-host flag for IP Version 4 (IPv4), VPN Version 4 (VPNv4), virtual routing and forwarding (VRF) address families, and IPv6 address families, use the bgp recursion host comma" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp redistribute-internal", "cmd": "Router(config)# router ospf 300\nRouter(config-router)# redistribute bgp 200\nRouter(config-router)# exit\nRouter(config)# router bgp 200\nRouter(config-router)# address-family ipv4\nRouter(config-router-af)# bgp redistribute-internal\nRouter(config-router-af)# end\nRouter# clear ip bgp", "desc": "To configure iBGP redistribution into an interior gateway protocol (IGP), such as IS-IS or OSPF, use the bgp redistribute-internal command in address family or router configuration mode. To stop iBGP " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp refresh max-eor-time", "cmd": "bgp refresh max-eor-time\nbgp refresh max-eor-time seconds\nno bgp refresh max-eor-time", "desc": "To cause the router to generate a Route-Refresh End-of-RIB (EOR) message if it was not able to generate one due to route flapping, use the bgp refresh max-eor-time command in router configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp refresh stalepath-time", "cmd": "bgp refresh stalepath-time", "desc": "To cause the router to remove stale routes from the BGP table even if the router does not receive a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp regexp deterministic", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# bgp regexp deterministic\nRouter(config)# router bgp 50000\nRouter(config-router)# no bgp regexp deterministic", "desc": "To configure system to use the regular expression engine that internally uses the DFA-based algorithm, use the bgp regexp deterministic command in router configuration mode. To configure Cisco IOS sof" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp route-map priority", "cmd": "bgp route-map priority\nbgp route-map priority\nno bgp route-map priority", "desc": "To configure the route map priority for a local Border Gateway Protocol (BGP) routing process, use the bgp route-map priority command in address family configuration mode. To remove the route map prio" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp router-id", "cmd": "bgp router-id\nbgp router-id {ip-address | vrf auto-assign}\nno bgp router-id [vrf auto-assign]", "desc": "To configure a fixed router ID for the local Border Gateway Protocol (BGP) routing process, use the bgp router-id command in router or address family configuration mode. To remove the fixed router ID " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp rpki server", "cmd": "Router(config)# router bgp 65000\nRouter(config-router)# bgp rpki server tcp 192.168.1.1 port 1033 refresh 600", "desc": "To connect to a Resource Public Key Infrastructure (RPKI) server and enable the validation of Border Gateway" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp rr-group", "cmd": "Router(config)# ip vrf RED\nRouter(config-vrf)# rd 50000:10000\nRouter(config-vrf)# route-target both 50000:10000\nRouter(config-vrf)# route-target export 50000:1024\nRouter(config-vrf)# exit\nRouter(config)# ip extcommunity-list 1 permit rt 50000:1024\nRouter(config)# router bgp 50000\nRouter(config-router)# address family vpnv4\nRouter(config-router-af)# bgp rr-group 1\nRouter(config-router-af)# neighbor 192.168.0.1 activate", "desc": "To create a route-reflector group and enable automatic inbound filtering for VPN version 4 (VPNv4) updates based on the allowed route target (RT) extended communities, use the bgp rr-group command in " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp scan-time", "cmd": "bgp scan-time\nbgp scan-time [import] scanner-interval\nno bgp scan-time [import] scanner-interval", "desc": "To configure scanning intervals of Border Gateway Protocol (BGP) routers for next hop validation or to decrease import processing time of Virtual Private Network version 4 (VPNv4) routing information," }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp slow-peer detection", "cmd": "Router(config-router-af)# bgp slow-peer detection threshold 360", "desc": "To specify a threshold time that dynamically determines a slow peer, use the bgp slow-peer detection command in address-family configuration mode. To restore the default value, use the no form of this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp slow-peer split-update-group dynamic", "cmd": "Router(config-router-af)# bgp slow-peer detection threshold 360\nRouter(config-router-af)# bgp slow-peer split-update-group dynamic", "desc": "BGP — bgp slow-peer split-update-group dynamic" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp soft-reconfig-backup", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# bgp soft-reconfig-backup\nRouter(config-router)# neighbor 10.1.1.1 remote-as 40000\nRouter(config-router)# neighbor 192.168.1.1 remote-as 60000", "desc": "To configure a Border Gateway Protocol (BGP) speaker to perform inbound soft reconfiguration for peers that do not support the route refresh capability, use the bgp soft-reconfig-backup command in add" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp sso route-refresh-enable", "cmd": "Router(config-router)# bgp sso route-refresh-enable", "desc": "To enable BGP to send route-refresh requests to nonstop routing (NSR) peers in the event of an RP failover, use the bgp sso route-refresh-enable command in router configuration mode. To disable the se" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp suppress-inactive", "cmd": "Device(config)# router bgp 500000\nDevice(config-router)# address-family ipv4\nDevice(config-router)# bgp suppress-inactive\nDevice(config)# router bgp 500000\nDevice(config-router)# address-family ipv6\nDevice(config-router)# bgp suppress-inactive", "desc": "To suppress the advertisement of routes that are not installed in the routing information base (RIB), use the bgp suppress-inactive command in address family or router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp transport", "cmd": "bgp transport\nbgp transport path-mtu-discovery\nno bgp transport path-mtu-discovery", "desc": "To enable TCP transport session parameters globally for all Border Gateway Protocol (BGP) sessions, use the bgp transport command in router configuration mode. To disable TCP transport session paramet" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp update-delay", "cmd": "bgp update-delay\nno form of this command.\nbgp update-delay seconds\nno bgp update-delay", "desc": "To set the maximum initial delay period before a Border Gateway Protocol (BGP)-speaking networking device sends its first updates, use the bgp update-delay command in router configuration mode. To rem" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp update-group split as-override", "cmd": "bgp update-group split as-override\nbgp update-group split as-override\nno bgp update-group split as-override", "desc": "To keep peers that are configured with neighbor as-override in separate, single-member update groups, use the bgp update-group split as-override command in address-family configuration mode. To restor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp upgrade-cli", "cmd": "Router(config)#\nRouter(config-router)#", "desc": "To upgrade a Network Layer Reachability Information (NLRI) formatted router configuration file to the address-family identifier (AFI) format and set the router command-line interface (CLI) to use only" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "bgp-policy", "cmd": "Router(config)# interface ethernet 4/0/0\nRouter(config-if)# bgp-policy source ip-prec-map\nRouter(config-if)# end\nRouter(config)# router bgp 50000\nRouter(config-router)# no synchronization\nRouter(config-router)# table-map buckets\nRouter(config-router)# exit\nRouter(config)# ip as-path access-list 1 permit _10_\nRouter(config)# ip as-path access-list 2 permit _11_\nRouter(config)# route-map buckets permit 10", "desc": "To enable Border Gateway Protocol (BGP) policy accounting or policy propagation on an interface, use the bgp-policy command in interface configurationmode. To disable BGP policy accounting or policy p" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear bgp l2vpn evpn", "cmd": "Router# clear bgp l2vpn evpn 45000 soft in", "desc": "To reset Border Gateway Protocol (BGP) neighbor session information for Layer 2 Virtual Private Network (L2VPN) address family Ethernet VPN, use the clear bgp l2vpn evpn command in privileged EXEC mod" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear bgp nsap", "cmd": "Router# clear bgp nsap 172.20.16.6 in\nRouter# clear bgp nsap 65000 soft out", "desc": "To clear and then reset Connectionless Network Service (CLNS) network service access point (NSAP) Border" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear bgp nsap dampening", "cmd": "Router# clear bgp nsap dampening 49.6001", "desc": "To clear Border Gateway Protocol (BGP) route dampening information for the network service access point (NSAP) address family and unsuppress the suppressed routes, use the clear bgp nsap dampening com" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear bgp nsap external", "cmd": "Router# clear bgp nsap external soft in", "desc": "To clear all external BGP (eBGP) peers for the network service access point (NSAP) address family, use the clear bgp nsap external command in privileged EXEC mode. clear bgp nsap external [soft] [in |" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear bgp nsap flap-statistics", "cmd": "Router# clear bgp nsap flap-statistics filter-list 3", "desc": "To clear Border Gateway Protocol (BGP) flap statistics for the network service access point (NSAP) address family, use the clear bgp nsap flap-statistics command in privileged EXEC mode. clear bgp nsa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear bgp nsap peer-group", "cmd": "Router# clear bgp nsap peer-group internal", "desc": "To clear the Border Gateway Protocol (BGP) TCP connections to all members of a BGP peer group for the network service access point (NSAP) address family, use the clear bgp nsap peer-group command in p" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear proximity ip bgp", "cmd": "Device#\nDevice#\nDevice#\nDevice#\nDevice#", "desc": "To reset Border Gateway Protocol (BGP) connections using hard or soft reconfiguration, use the clear proximity ip bgp command in privileged EXEC mode. clear proximity ip bgp {* | allautonomous-system-" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip bgp dampening", "cmd": "Router#", "desc": "To clear BGP route dampening information and to unsuppress suppressed routes, use the clear ip bgp dampening command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip bgp external", "cmd": "Router# clear ip bgp external soft in\nRouter# clear ip bgp external ipv4 multicast out", "desc": "To reset external Border Gateway Protocol (eBGP) peering sessions using hard or soft reconfiguration, use the clear ip bgp external command inprivileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip bgp flap-statistics", "cmd": "Router#\nRouter#\nRouter#", "desc": "To clear BGP route dampening flap statistics, use the clear ip bgp flap-statistics command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip bgp in prefix-filter", "cmd": "clear ip bgp in prefix-filter\nclear ip bgp ipv4", "desc": "BGP — clear ip bgp in prefix-filter" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip bgp ipv4", "cmd": "Router#\nRouter#\nRouter#\nRouter#\nRouter#", "desc": "To reset Border Gateway Protocol (BGP) connections using hard or soft reconfiguration for IPv4 address family sessions, use the clear ip bgp ipv4 command in privileged EXEC mode. clear ip bgp [vrf vrf" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip bgp mvpn", "cmd": "Device# clear ip bgp ipv4 mvpn vrf blue dampening", "desc": "To clear Border Gateway Protocol (BGP) route dampening information with multicast VPN (MVPN) address family sessions and to unsuppress suppressed routes, use the clear ip bgp mvpn command in privilege" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip bgp rpki server", "cmd": "Router# clear ip bgp rpki server 192.168.14.2 port 1030", "desc": "To close the TCP connection to the specified Resource Public Key Infrastructure (RPKI) server, purge SOVC records downloaded from that server, renegotiate the TCP connection, and redownload SOVC recor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip bgp table-map", "cmd": "Router(config)# route-map SET_BUCKET permit 10\nRouter(config-route-map)# match community 1\nRouter(config-route-map)# set traffic-index 2\nRouter(config-route-map)# exit\nRouter(config)# router bgp 50000\nRouter(config-router)# address-family ipv4\nRouter(config-router-af)# table-map SET_BUCKET\nRouter(config-router-af)# end\nRouter# clear ip bgp table-map\nRouter# clear ip bgp ipv4 unicast table-map", "desc": "To reload information in the Border Gateway Protocol (BGP) routing table after a change in a table map or the route map referenced by a table map, use the clear ip bgp table-map command in privileged " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip bgp update-group", "cmd": "Router# clear ip bgp 10.0.0.1\nRouter# clear ip bgp update-group 10.0.0.1\nRouter# clear ip bgp update-group 1\nRouter# clear ip bgp ipv4 mdt update-group 6", "desc": "To reset Border Gateway Protocol (BGP) connections for all the members of a BGP update group, use the clear ip bgp update-group command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip bgp vpnv4 unicast dampening", "cmd": "Router# clear ip bgp vpnv4 unicast dampening rd 10:1 192.168.2.1 255.255.255.0", "desc": "To reset Border Gateway Protocol (BGP) route flap dampening for a particular IPv4 Virtual Private Network version 4 (VPNv4) address family prefix on a device that has no VRF concept, use the clear ip " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip bgp vpnv6 unicast dampening", "cmd": "Router# clear ip bgp vpnv6 unicast dampening rd 1:0 2001:1000::0/64", "desc": "To reset Border Gateway Protocol (BGP) route flap dampening for a particular IPv6 Virtual Private Network version 6 (VPNv6) address family prefix, use the clear ip bgp vpnv6 unicast dampening command " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip prefix-list", "cmd": "Router# clear ip prefix-list FIRST_LIST 10.0.0.0/8", "desc": "To reset IP prefix-list counters, use the clear ip prefix-list command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "continue", "cmd": "Router(config)# route-map ROUTE-MAP-NAME permit 10\nRouter(config-route-map)# match ip address 1\nRouter(config-route-map)# match metric 10\nRouter(config-route-map)# set as-path prepend 10\nRouter(config-route-map)# continue 30\nRouter(config-route-map)# exit\nRouter(config)# route-map ROUTE-MAP-NAME permit 20\nRouter(config-route-map)# match ip address 2\nRouter(config-route-map)# match metric 20\nRouter(config-route-map)# set as-path prepend 10 10", "desc": "To configure a route map to go to a route-map entry with a higher sequence number, use the continue command in route-map configuration mode. To remove a continue clause from a route map, use the no fo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug ip bgp event rpki", "cmd": "Router# debug ip bgp event rpki", "desc": "To display information related to the BGP—Origin AS Validation feature and the process of connecting to a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug ip bgp igp-metric ignore", "cmd": "Router# debug ip bgp igp-metric ignore", "desc": "To display information related to the system ignoring the Interior Gateway Protocol (IGP) metric during best path selection, use the debug ip bgp igp-metric ignore command in privileged EXECmode. To d" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug ip bgp import", "cmd": "Router# debug ip bgp import events\nRouter# debug ip bgp import updates\nDevice# debug ip bgp import events", "desc": "To display debugging information related to importing IPv4 prefixes from the BGP global routing table into a VRF table or exporting from a VRF table into the BGP global table, use the debug ip bgp imp" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug ip bgp route-server", "cmd": "Router# debug ip bgp route-server client", "desc": "To turn on debugging for a BGP route server, use the debug ip bgp route-server command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug ip bgp sso", "cmd": "debug ip bgp sso\nno debug ip bgp sso {events | transactions} [detail]", "desc": "To display Border Gateway Protocol (BGP)-related stateful switchover (SSO) events or debugging information for BGP-related interactions between the active Route Processor (RP) and the standby RP, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "description (route server context)", "cmd": "Router(config)# router bgp 65000\nRouter(config-router)# route-server-context only_AS27_context\nRouter(config-router-rsctx)# description Context references route map permitting only routes", "desc": "To specify a description for a BGP route server context, use the description command in route server context configuration mode. To remove the description, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "distance bgp", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# address family ipv4 multicast\nRouter(config-router-af)# network 10.108.0.0\nRouter(config-router-af)# neighbor 192.168.6.6 remote-as 123\nRouter(config-router-af)# neighbor 172.16.1.1 remote-as 47\nRouter(config-router-af)# distance bgp 10 50 100\nRouter(config-router-af)# end", "desc": "To configure the administrative distance for BGP routes, use the distance bgp command in address family or router configuration mode. To return to the administrative distance to the default value, use" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "distribute-list in (BGP)", "cmd": "Router(config)# ip prefix-list RED permit 10.1.1.0/24\nRouter(config)# ip prefix-1ist RED permit 10.108.0.0/16\nRouter(config)# ip prefix-list RED permit 192.168.1.0/24\nRouter(config)# router bgp 50000\nRouter(config-router)# network 10.108.0.0\nRouter(config-router)# distribute-list prefix RED in\nRouter(config-router)# end\nRouter# clear ip bgp in\nRouter(config)# access-list 1 permit 192.168.1.0\nRouter(config)# access-list 1 permit 10.108.0.0", "desc": "To filter routes or networks received in incoming Border Gateway Protocol (BGP) updates, use the distribute-list in command in router configuration mode. To delete the distribute list and remove it fr" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "distribute-list out (BGP)", "cmd": "Router(config)# ip prefix-list BLUE permit 192.168.0.0/16\nRouter(config)# router bgp 50000\nRouter(config-router)# distribute-list prefix BLUE out\nRouter(config-router)# end\nRouter# clear ip bgp out\nRouter(config)# access-list 1 permit 192.168.0.0 0.0.255.255\nRouter(config)# access-list 1 deny 0.0.0.0 255.255.255.255\nRouter(config)# router bgp 50000\nRouter(config-router)# distribute-list 1 out\nRouter(config-router)# end", "desc": "To suppress networks from being advertised in outbound Border Gateway Protocol (BGP) updates, use the distribute-list out command in router configuration mode. To delete the distribute list and remove" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "exit-peer-policy", "cmd": "Router(config-router-ptmp)# exit-peer-policy\nRouter(config-router)#", "desc": "To exit policy-template configuration mode and enter router configuration mode, use the exit-peer-policy command in policy-template configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "exit-peer-session", "cmd": "Router(config-router-stmp)# exit-peer-session\nRouter(config-router)#", "desc": "To exit session-template configuration mode and enter router configuration mode, use the exit-peer-session command in session-template configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "exit-route-server-context", "cmd": "Router(config-router-rsctx)# prompt. However, the exit command performs the same function as the\nRouter(config)#", "desc": "To exit a route server context and return to router configuration mode, use the exit-route-server-context command in route server context configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "export map (VRF table to global table)", "cmd": "export map (VRF table to global table)\nno export {ipv4 | ipv6} {unicast | multicast} [prefix-limit] map map-name", "desc": "To export IP prefixes from a VRF table into the global table, use the export map command in IP VRF configuration or in address family configuration mode. To remove the export map, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ha-mode graceful-restart", "cmd": "ha-mode graceful-restart\nha-mode graceful-restart [disable]\nno ha-mode graceful-restart [disable]", "desc": "To enable or disable the Border Gateway Protocol (BGP) graceful restart capability for a BGP peer session template, use the ha-mode graceful-restart command in peer session template configurationmode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "import ipv4", "cmd": "import ipv4\nno import ipv4 {unicast | multicast} [prefix-limit] map route-map", "desc": "To configure an import map to import IPv4 prefixes from the global routing table to a VRF table, use the import ipv4 command in VRF configuration or in VRF address family configuration mode. To remove" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "import map", "cmd": "Router(config)# ip vrf vrf1\nRouter(config-vrf)# import map importmap1", "desc": "To configure an import route map for a Virtual Private Network (VPN) routing and forwarding (VRF) instance, use the import map command in VRF configuration or in VRF address family configurationmode. " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "import path limit", "cmd": "Router(config)# router bgp 45000\nRouter(config-router)# neighbor 192.168.1.2 remote-as 40000\nRouter(config-router)# neighbor 192.168.3.2 remote-as 50000\nRouter(config-router)# address-family vpnv4\nRouter(config-router-af)# neighbor 192.168.1.2 activate\nRouter(config-router-af)# neighbor 192.168.3.2 activate\nRouter(config-router-af)# exit-address-family\nRouter(config-router)# address-family ipv4 vrf vrf-A\nRouter(config-router-af)# import path selection all\nRouter(config-router-af)# import path limit 3", "desc": "To specify the maximum number of Border Gateway Protocol (BGP) paths, per VPN routing and forwarding (VRF) importing net, that can be imported from an exporting net, use the import path limit command " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "import-map", "cmd": "import-map\nimport-map route-map-name\nno import-map route-map-name", "desc": "To configure flexible policy handling by a BGP route server, use the import-map command in route server context address family configuration mode. To remove the route server’s flexible policy handling" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "inherit peer-policy", "cmd": "Router(config-router)# template peer-policy CUSTOMER-A\nRouter(config-router-ptmp)# route-map SET-COMMUNITY in\nRouter(config-router-ptmp)# filter-list 20 in\nRouter(config-router-ptmp)# inherit peer-policy PRIMARY-IN 20\nRouter(config-router-ptmp)# inherit peer-policy GLOBAL 10\nRouter(config-router-ptmp)# exit-peer-policy\nRouter(config-router)#", "desc": "To configure a peer policy template to inherit the configuration from another peer policy template, use the inherit peer-policy command in policy-template configuration mode. To remove an inherit stat" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "inherit peer-session", "cmd": "Router(config-router)# template peer-session CORE1\nRouter(config-router-stmp)# description CORE-123\nRouter(config-router-stmp)# update-source loopback 1\nRouter(config-router-stmp)# inherit peer-session INTERNAL-BGP\nRouter(config-router-stmp)# exit-peer-session\nRouter(config-router)#", "desc": "To configure a peer session template to inherit the configuration from another peer session template, use the inherit peer-session command in session-template configuration mode. To remove an inherit " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip as-path access-list", "cmd": "ip as-path access-list\nno ip as-path access-list acl-number", "desc": "To configure an autonomous system path filter using a regular expression, use the ip as-path access-list command in global configuration mode. To delete the autonomous system path filter and remove it" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip bgp fast-external-fallover", "cmd": "Router(config)# interface ethernet 0/0\nRouter(config-if)# ip bgp fast-external-fallover permit", "desc": "To configure per-interface fast external fallover, use the ip bgp fast-external-fallover command in interface configuration mode. To remove a per-interface fast external fallover configuration, use th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip bgp-community new-format", "cmd": "Router(config)# ip bgp-community new-format\nRouter# show ip bgp 10.0.0.0", "desc": "To configure BGP to display communities in the format AA:NN (autonomous system:community number/4-byte number), use the ip bgp-community new-format command in global configuration mode. To configure B" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip community-list", "cmd": "Router(config)# ip community-list 1 permit 50000:10\nRouter(config)# ip community-list 1 permit no-export\nRouter(config)# ip community-list 2 deny 65534:40 65412:60\nRouter(config)# ip community-list standard RED permit local-as\nRouter(config)# ip community-list standard RED permit 40000:20\nRouter(config)# ip community-list 18 deny gshut\nRouter(config)# ip community-list 18 permit local-as\nRouter(config)# ip community-list 500 deny _64[6-9][0-9][0-9]_|_65[0-9][0-9][0-9]_\nRouter(config)# ip community-list expanded BLUE deny 50000:[0-9][0-9]_", "desc": "To configure a BGP community list and to control which routes are permitted or denied based on their community values, use the ip community-list command in global configuration mode. To delete the com" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip extcommunity-list", "cmd": "Router(config)# ip extcommunity-list 1 permit rt 64512:10\nRouter(config)# ip extcommunity-list 1 permit soo 65400:20\nRouter(config)# ip extcommunity-list 2\nRouter(config)# ip extcommunity-list 500 deny _65412_\nRouter(config)# router bgp 50000\nRouter(config-router)# address-family vpnv4\nRouter(config-router-af)# neighbor 172.16.1.1 remote-as 65412\nRouter(config-router-af)# neighbor 172.16.1.1\nRouter(config-router-af)# neighbor 192.168.1.2 remote-as 65534\nRouter(config-router-af)# neighbor 192.168.1.2", "desc": "To create an extended community list to configure Virtual Private Network (VPN) route filtering, use the ip extcommunity-list command in global configuration mode. To delete the extended community lis" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip policy-list", "cmd": "Router(config)# ip policy-list POLICY-LIST-NAME-1 permit\nRouter(config-policy-list)# match as-path 1\nRouter(config-policy-list)# match metric 10\nRouter(config-policy-list)# end\nRouter(config)# ip policy-list POLICY-LIST-NAME-2 permit\nRouter(config-policy-list)# match community 20\nRouter(config-policy-list)# match metric 10\nRouter(config-policy-list)# end\nRouter(config)# ip policy-list POLICY-LIST-NAME-3 deny\nRouter(config-policy-list)# match community 20", "desc": "To create a Border Gateway Protocol (BGP) policy list, use the ip policy-list command in global configuration mode. To remove a policy list, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip prefix-list", "cmd": "Router(config)# ip prefix-list RED deny 0.0.0.0/0\nRouter(config)# ip prefix-list BLUE permit 172.16.1.0/24\nRouter(config)# ip prefix-list YELLOW permit 10.0.0.0/8 le 24\nRouter(config)# ip prefix-list PINK deny 10.0.0.0/8 ge 25\nRouter(config)# ip prefix-list GREEN permit 0.0.0.0/0 ge 8 le 24\nRouter(config)# ip prefix-list ORANGE deny 10.0.0.0/8 le 32", "desc": "To create a prefix list or to add a prefix-list entry, use the ip prefix-list command in global configuration mode. To delete a prefix-list entry, use the no form of this command. ip prefix-list {list" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip prefix-list description", "cmd": "Router(config)# ip prefix-list RED description Permit routes from network A", "desc": "To add a text description of a prefix list, use the ip prefix-list description command in global configuration mode. To remove the text description, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip prefix-list sequence-number", "cmd": "Router(config)# no ip prefix-list sequence-number", "desc": "To enable the generation of default sequence numbers for entries in a prefix list, use the ip prefix-list sequence-number command in global configuration mode. To suppress default generation of sequen" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ip verify unicast vrf", "cmd": "Router(config)# interface Ethernet 0\nRouter(config-if)# ip verify unicast vrf vrf1 permit\nRouter(config-if)# ip verify unicast vrf vrf2 deny\nRouter(config-if)# end", "desc": "To enable Unicast Reverse Path Forwarding (Unicast RPF) verification for a specified VRF, use the ip verify unicast vrf command in interface configuration mode. To disable the Unicast RPF check for a " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "match additional-paths advertise-set", "cmd": "match additional-paths advertise-set\n[all]\nno match additional-paths advertise-set [best number] [best-range range-start range-end]\n[group-best] [all]", "desc": "To match on paths that are marked (tagged) with a specific path-marking policy, use the match additional-paths advertise-set command in route-map configuration mode. To remove the match additional-pat" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "match as-path", "cmd": "match as-path\nmatch as-path path-list-number\nno match as-path path-list-number", "desc": "To match a BGP autonomous system path that is specified by an access list, use the match as-path command in route-map configuration mode. To remove a path list entry, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "match community", "cmd": "Router(config)# ip community-list 1 permit 109\nRouter(config)# route-map set_weight\nRouter(config-route-map)# match community 1\nRouter(config-route-map)# set weight 100\nRouter(config)# ip community-list 1 permit 109\nRouter(config)# route-map set_weight\nRouter(config-route-map)# match community\nRouter(config-route-map)# set weight 200\nRouter(config)# ip community-list LIST_NAME permit 101\nRouter(config)# route-map set_weight", "desc": "To match a Border Gateway Protocol (BGP) community, use the match community command in route-map configuration mode. To remove the match community command from the configuration file and restore the s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "match extcommunity", "cmd": "Router(config)# ip extcommunity-list 500 rt 100:2\nRouter(config-extcomm-list)# exit\nRouter(config)# route-map MAP_NAME permit 10\nRouter(config-route-map)# match extcommunity 1\nRouter(config-route-map)# set weight 100", "desc": "BGP — match extcommunity" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "match local-preference", "cmd": "Router(config)#\nRouter(config-route-map)#", "desc": "To configure a route map to match routes based on the Border Gateway Protocol (BGP) local-preference attribute, use the match local-preference command in route-map configuration mode. To remove the ma" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "match policy-list", "cmd": "Router(config)# route-map MAP-NAME-1 10\nRouter(config-route-map)# match ip-address 1\nRouter(config-route-map)# match policy-list POLICY-LIST-NAME-1\nRouter(config-route-map)# set community 10:1\nRouter(config-route-map)# set local-preference 140\nRouter(config-route-map)# end\nRouter(config)# route-map MAP-NAME-2 10\nRouter(config-route-map)# match policy-list POLICY-LIST-NAME-2 POLICY-LIST-NAME-3\nRouter(config-route-map)# set community 10:1\nRouter(config-route-map)# set local-preference 140", "desc": "To configure a route map to evaluate and process a Border Gateway Protocol (BGP) policy list in a route map, use the match policy-list command in route-map configuration mode. To remove a path list en" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "match rpki", "cmd": "match rpki\nno match rpki {not-found | invalid | valid}", "desc": "To match Border Gateway Protocol (BGP) routes that have the specified Resource Public Key Infrastructure (RPKI) state, use the match rpki command in route-map configuration mode. To remove the match r" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "match source-protocol", "cmd": "match source-protocol", "desc": "To match Enhanced Interior Gateway Routing Protocol (EIGRP) external routes based on a source protocol and autonomous system number, use thematch source-protocol command in route-map configuration mod" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "maximum-paths eibgp", "cmd": "Device(config-router-af)# maximum-paths eibgp import 3\nDevice(config)# router bgp 64496\nRouter(config-router)# address-family ipv4 vrf vrf-1\nRouter(config-router-af)# maximum-paths eibgp 6\nDevice(config)# router bgp 64498\nDevice(config-router)# address-family ipv4 unicast\nDevice(config-router-af)# maximum-paths eibgp 4", "desc": "To enable multipath load sharing among external Border Gateway Protocol (eBGP) and internal BGP (iBGP) routes, use the maximum-paths eibgp command in address family configuration mode. To disable mult" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "maximum-paths ibgp", "cmd": "Router(config-router-af)# maximum-paths ibgp import 3\nRouter(config)# router bgp 100\nRouter(config-router)# maximum-paths ibgp 3\nRouter(config)# router bgp 100\nRouter(config-router)# address-family ipv4 unicast vrf vrf-A\nRouter(config-route-af)# maximum-paths ibgp 3\nRouter(config)# router bgp 100\nRouter(config-router)# address-family ipv4 vrf vrf-B\nRouter(config-router-af)# maximum-paths ibgp 2 import 2\nRouter(config-router-af)# end", "desc": "To control the maximum number of parallel internal Border Gateway Protocol (iBGP) routes that can be installed in a routing table, use the maximum-paths ibgp command in router or address family config" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "mvpn single-forwarder-selection highest-ip-address", "cmd": "Device(config)# configure terminal\nDevice(config)# router bgp 100\nDevice(config-router)# address-family ipv4 vrf test\nDevice(config-router-af)# mvpn single-forwarder-selection highest-ip-address", "desc": "To configure the Border Gateway Protocol (BGP) Multicast VPN (MVPN) Upstream Multicast Hop (UMH) chosen via the highest ip address, use the mvpn single-forwarder-selection highest-ip-address command i" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor activate", "cmd": "Router(config)# address-family vpnv4\nRouter(config-router-af)# neighbor PEPEER activate\nRouter(config-router-af)# neighbor 10.0.0.44 activate\nRouter(config-router-af)# exit-address-family\nDevice(config)# address-family ipv4 unicast\nDevice(config-router-af)# neighbor group1 activate\nDevice(config-router-af)# neighbor 172.16.1.1 activate\nDevice(config)# address-family ipv6\nDevice(config-router-af)# neighbor group2 activate\nDevice(config-router-af)# neighbor 7000::2 activate", "desc": "To enable the exchange of information with a Border Gateway Protocol (BGP) neighbor, use the neighbor activate command in address family configurationmode or router configurationmode. To disable the e" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor additional-paths", "cmd": "neighbor additional-paths\ndisable}\nno neighbor {ip-addressipv6-addresspeer-group-name} additional-paths {send [receive] | receive}", "desc": "To configure the local router with the ability to send and receive additional path information for a neighbor or peer group, use the neighbor additional-paths command in address family configurationmo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor advertise additional-paths", "cmd": "neighbor advertise additional-paths\n[group-best] [all]\nno neighbor {ip-addressipv6-addresspeer-group-name} advertise additional-paths [best number]\n[group-best] [all]", "desc": "To advertise additional paths for a neighbor based on selection, use the neighbor advertise additional-paths command in address family configurationmode. To prevent the advertisement of additional pat" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor advertise best-external", "cmd": "neighbor advertise best-external\nno neighbor {ip-addressipv6-addresspeer-group-namepolicy-template-name} advertise best-external", "desc": "To specify that a neighbor receive the advertisement of the best external path, use the neighbor advertise best-external command in address family configuration mode. To remove the designation, use th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor advertise diverse-path", "cmd": "neighbor advertise diverse-path\n{backup [mpath] | mpath}\nno neighbor {ip-addressipv6-addresspeer-group-namepolicy-template-name} advertise diverse-path\n{backup [mpath] | mpath}", "desc": "To specify that an additional path (a backup path or multipath or both) is advertised to a peer in addition to the best path, use the neighbor advertise diverse-path command in address family configur" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor advertise-map", "cmd": "Device# show ip bgp\nDevice# show ip bgp neighbors 192.168.20.2 advertised-routes", "desc": "To advertise the routes in the BGP table matching the configured route-map, use the neighbor advertise-map command in router configuration mode. To disable route advertisement, use the no form of this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor advertisement-interval", "cmd": "neighbor advertisement-interval\nno neighbor {ip-addresspeer-group-name} advertisement-interval seconds", "desc": "To set the minimum route advertisement interval (MRAI) between the sending of BGP routing updates, use the neighbor advertisement-interval command in address family or router configuration mode. To re" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor allow-policy", "cmd": "neighbor allow-policy\nneighbor {ip-addressipv6-addresspeer-group} allow-policy\nno neighbor {ip-addressipv6-addresspeer-group} allow-policy", "desc": "To allow a route reflector to be configured to change iBGP attributes (policies) in updates for an iBGP session that has the iBGP Local-AS feature configured, use the neighbor allow-policy command in " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor announce rpki state", "cmd": "neighbor announce rpki state", "desc": "To cause the device to send the Resource Public Key Infrastructure (RPKI) state with prefixes to its Internal" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor as-override split-horizon", "cmd": "Device> enable\nDevice# configure terminal\nDevice(config)# router bgp 21\nDevice(config-router)# address-family ipv4 vrf vrf1\nDevice(config-router-af)# neighbor 192.0.2.1 remote-as 1\nDevice(config-router-af)# neighbor 192.0.2.1 activate\nDevice(config-router-af)# neighbor 192.0.2.1 as-override split-horizon\nDevice(config-router-af)# neighbor 198.51.100.1 remote-as 1\nDevice(config-router-af)# neighbor 198.51.100.1 activate\nDevice(config-router-af)# neighbor 198.51.100.1 as-override split-horizon", "desc": "To enable split-horizon for a neighbor in a virtual routing and forwarding (VRF) instance, use the neighbor as-override split-horizon command in router address family configuration mode. To disable sp" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor capability orf prefix-list", "cmd": "neighbor capability orf prefix-list\nno neighbor ip-address capability orf prefix-list [receive | send | both]", "desc": "To advertise outbound route filter (ORF) capabilities to a peer router, use the neighbor capability orf prefix-list command in address family or router configuration mode. To disable ORF capabilities," }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor cluster-id", "cmd": "neighbor cluster-id\nneighbor {ip-addressipv6-address} cluster-id cluster-id\nno neighbor {ip-addressipv6-address} cluster-id cluster-id", "desc": "To set the cluster ID of a client, use the neighbor cluster-id command in router configuration mode. To remove the cluster ID, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor default-originate", "cmd": "neighbor default-originate\nno route as a default, use the no form of this command.\nno neighbor {ip-addresspeer-group-name} default-originate [route-map map-name]", "desc": "To allow a BGP speaker (the local router) to send the default route 0.0.0.0 to a neighbor for use as a default route, use the neighbor default-originate command in address family or router configurati" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor description", "cmd": "Router(config)# router bgp 109\nRouter(config-router)# network 172.16.0.0\nRouter(config-router)# neighbor 172.16.2.3 description peer with example.com\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)#\nRouter(config-router-af)#", "desc": "To associate a description with a neighbor, use the neighbor description command in router configuration mode or address family configuration mode. To remove the description, use the no form of this c" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor disable-connected-check", "cmd": "Router(config)# interface loopback 1\nRouter(config-if)# ip address 10.0.0.100 255.255.255\nRouter(config-if)# exit\nRouter(config)# router bgp 64512\nRouter(config-router)# neighbor 192.168.0.200 remote-as 65534\nRouter(config-router)# neighbor 192.168.0.200 ebgp-multihop 1\nRouter(config-router)# neighbor 192.168.0.200 update-source loopback 2\nRouter(config-router)# neighbor 192.168.0.200 disable-connected-check\nRouter(config-router)# end\nRouter(config)# interface loopback 2", "desc": "To disable connection verification to establish an eBGP peering session with a single-hop peer that uses a loopback interface, use the neighbor disable-connected-check command in address family or rou" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor distribute-list", "cmd": "neighbor distribute-list\nneighbor {ip-addresspeer-group-name}distribute-list\nno neighbor {ip-addresspeer-group-name}distribute-list", "desc": "To distribute BGP neighbor information as specified in an access list, use the neighbor distribute-list command in address family or router configuration mode. To remove an entry, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor dmzlink-bw", "cmd": "Router(config)# router bgp 100\nRouter(config-router)# neighbor 10.10.10.1 remote-as 100\nRouter(config-router)# neighbor 10.10.10.1 update-source Loopback 0\nRouter(config-router)# neighbor 10.10.10.3 remote-as 100\nRouter(config-router)# neighbor 10.10.10.3 update-source Loopback 0\nRouter(config-router)# neighbor 172.16.1.1 remote-as 200\nRouter(config-router)# neighbor 172.16.1.1 ebgp-multihop 1\nRouter(config-router)# neighbor 172.16.2.2 remote-as 200\nRouter(config-router)# neighbor 172.16.2.2 ebgp-multihop 1\nRouter(config-router)# address-family ipv4", "desc": "To configure Border Gateway Protocol (BGP) to advertise the bandwidth of links that are used to exit an autonomous system, use the neighbor dmzlink-bw command in address family configuration mode. To " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor ebgp-multihop", "cmd": "neighbor ebgp-multihop\nno form of this command.\nno neighbor {ip-addressipv6-addresspeer-group-name} ebgp-multihop", "desc": "To accept and attempt BGP connections to external peers residing on networks that are not directly connected, use the neighbor ebgp-multihop command in router configuration mode. To return to the defa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor Fall over", "cmd": "neighbor Fall over\n| maximum-metric]\nno neighbor {ip-addressipv6-address} Fall over [bfd [check-control-plane-failure] | route-map\nmap-name | maximum-metric]", "desc": "To enable Border Gateway Protocol (BGP) to monitor the peering session of a specified neighbor for adjacency changes and to deactivate the peering session, use the neighbor Fall over command in addres" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor filter-list", "cmd": "neighbor filter-list", "desc": "To set up a BGP filter, use the neighbor filter-list command in address family or router configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor ha-mode graceful-restart", "cmd": "neighbor ha-mode graceful-restart\nno neighbor {ip-addresspeer-group-name} ha-mode graceful-restart [disable]", "desc": "To enable or disable the Border Gateway Protocol (BGP) graceful restart capability for a BGP neighbor or peer group, use the neighbor ha-mode graceful-restart command in router configuration mode. To " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor ha-mode sso", "cmd": "Router(config-router-af)# neighbor 10.3.32.154 ha-mode sso", "desc": "To configure a Border Gateway Protocol (BGP) neighbor to support BGP nonstop routing (NSR) with stateful switchover (SSO), use the neighbor ha-mode sso command in the appropriate command mode. To remo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor inherit peer-policy", "cmd": "Router(config)# router bgp 101\nRouter(config-router)# neighbor 10.0.0.1 remote-as 202\nRouter(config-router)# address-family ipv4 unicast\nRouter(config-router-af)# neighbor 10.0.0.1 inherit peer-policy CUSTOMER-A\nRouter(config-router-af)# exit", "desc": "To send a peer policy template to a neighbor so that the neighbor can inherit the configuration, use the neighbor inherit peer-policycommand in address family or router configuration mode. To stop sen" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor inherit peer-session", "cmd": "Router(config)# router bgp 101\nRouter(config)# neighbor 172.16.0.1 remote-as 202\nRouter(config-router)# neighbor 172.16.0.1 inherit peer-session CORE1", "desc": "To send a peer session template to a neighbor so that the neighbor can inherit the configuration, use the neighbor inherit peer-sessioncommand in address family or router configuration mode. To stop s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor internal-vpn-client", "cmd": "Device(config-router)# address-family ipv4 vrf blue\nDevice(config-router-af)# neighbor 10.0.0.1 internal-vpn-client", "desc": "To enable provider edge (PE) or customer edge (CE) devices to exchange Border Gateway Protocol (BGP) routing by peering as internal BGP(iBGP), use the neighbor internal-vpn-client command in address f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor local-as", "cmd": "neighbor local-as", "desc": "To customize the AS_PATH attribute for routes received from an external Border Gateway Protocol (eBGP) neighbor, or to configure the BGP—Support for iBGP Local-AS feature, use the neighbor local-as co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor maximum-prefix (BGP)", "cmd": "Router(config)# router bgp 40000\nRouter(config-router)# network 192.168.0.0\nRouter(config-router)# neighbor 192.168.1.1 maximum-prefix 1000\nRouter(config)# router bgp 40000\nRouter(config-router)# network 192.168.0.0\nRouter(config-router)# neighbor 192.168.2.2 maximum-prefix 5000 50\nRouter(config)# router bgp 40000\nRouter(config-router)# neighbor 192.168.3.3 maximum-prefix 2000 restart 30\nRouter(config)# router bgp 40000\nRouter(config-router)# network 192.168.0.0", "desc": "To control howmany prefixes can be received from a neighbor, use the neighbor maximum-prefix command in router configuration mode. To disable this function, use the no form of this command. neighbor {" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor next-hop-self", "cmd": "neighbor next-hop-self\nneighbor {ip-addresspeer-group-name} next-hop-self [all]\nno neighbor {ip-addresspeer-group-name} next-hop-self [all]", "desc": "To configure a router as the next hop for a BGP-speaking neighbor or peer group, use the neighbor next-hop-self command in router configurationmode. To disable this feature, use the no form of this co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor next-hop-unchanged", "cmd": "neighbor next-hop-unchanged\nno neighbor {ip-addressipv6-addresspeer-group-name} next-hop-unchanged [allpaths]", "desc": "To enable an external BGP (eBGP) peer that is configured as multihop to propagate the next hop unchanged, use the neighbor next-hop-unchanged command in address family or router configuration mode. To" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor password", "cmd": "Router(config)# router bgp 200\nRouter(config-router)# bgp router-id 2.2.2.2\nRouter(config-router)# neighbor remote-as 3\nRouter(config-router)# neighbor 209.165.200.225 password 1234567891234567891234567890\nRouter(config-router)# do show run | i password\nRouter(config)# service password-encryption\nRouter(config)# router bgp 200\nRouter(config-router)# bgp router-id 2.2.2.2\nRouter(config-router)# neighbor 209.165.200.225 remote-as 3\nRouter(config-router)# neighbor 209.165.200.225 password 1234567891234567891234567890", "desc": "To enable message digest5 (MD5) authentication on a TCP connection between two BGP peers, use the neighbor password command in router configuration mode. To disable this function, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor path-attribute discard", "cmd": "neighbor path-attribute discard\nend-value} in\nno neighbor {ip-addressipv6-address} path-attribute discard {attribute-value | range start-value\nend-value} in", "desc": "To configure the device to discard specific path attributes from Update messages from the specified neighbor, use the neighbor path-attribute discard command in router configuration mode. To disable t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor path-attribute treat-as-withdraw", "cmd": "neighbor path-attribute treat-as-withdraw\nend-value} in\nno neighbor {ip-addressipv6-address} path-attribute treat-as-withdraw {attribute-value | range\nstart-value end-value} in", "desc": "To treat-as-withdraw updates from specified neighbors containing specified path attributes, use the neighbor path-attribute discard command in router configuration mode. To disable this function, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor peer-group (assigning members)", "cmd": "neighbor peer-group (assigning members)\nno neighbor {ip-addressipv6-address} peer-group peer-group-name", "desc": "To configure a BGP neighbor to be a member of a peer group, use the neighbor peer-group command in address family or router configuration mode. To remove the neighbor from the peer group, use the nofo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor peer-group (creating)", "cmd": "neighbor peer-group (creating)\nneighbor peer-group-name peer-group\nno neighbor peer-group-name peer-group", "desc": "To create a BGP or multiprotocol BGP peer group, use the neighbor peer-group command in address family or router configuration mode. To remove the peer group and all of its members, use the noform of " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor prefix-list", "cmd": "neighbor prefix-list\nneighbor {ip-addresspeer-group-name} prefix-list\nno neighbor {ip-addresspeer-group-name} prefix-list", "desc": "To prevent distribution of Border Gateway Protocol (BGP) neighbor information as specified in a prefix list, a Connectionless Network Service (CLNS) filter expression, or a CLNS filter set, use the ne" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor remote-as", "cmd": "Device> enable\nDevice# configure terminal\nDevice(config)# router bgp 5\nDevice(config-router)# neighbor FE80::1234:BFF:FE0E:A471%GigabitEthernet0/0/0 remote-as\nDevice(config-router)# address-family ipv6\nDevice(config-router-af)# neighbor FE80::1234:BFF:FE0E:A471%GigabitEthernet0/0/0 activate\nDevice(config-router-af)# neighbor FE80::1234:BFF:FE0E:A471%GigabitEthernet0/0/0 route-map\nDevice(config-router-af)# exit\nDevice(config-router)# exit\nDevice(config)# route-map nh6permit 10", "desc": "To add an entry to the BGP or multiprotocol BGP neighbor table, use the neighbor remote-as command in router configuration mode. To remove an entry from the table, use the no form of this command. nei" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor remove-private-as", "cmd": "neighbor remove-private-as\nno neighbor {ip-addresspeer-group-name} remove-private-as", "desc": "To remove private autonomous system numbers from the autonomous system path (a list of autonomous systems that a route passes through to reach a BGP peer) in eBGP outbound routing updates, use the nei" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor route-map", "cmd": "neighbor route-map\nno neighbor {ip-addresspeer-group-name | ipv6-address[%]}route-map map-name {in | out}", "desc": "To apply a route map to incoming or outgoing routes, use the neighbor route-map command in address family or router configuration mode. To remove a route map, use the no form of this command. neighbor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor route-reflector-client", "cmd": "neighbor route-reflector-client\nno neighbor {ip-addressipv6-addresspeer-group-name} route-reflector-client", "desc": "To configure the router as a BGP route reflector and configure the specified neighbor as its client, use the neighbor route-reflector-client command in address family or router configuration mode. To " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor route-server-client", "cmd": "neighbor route-server-client\nno neighbor {ipv4-addressipv6-address} route-server-client [context context-name]", "desc": "To specify on a BGP route server that a neighbor is a route server client, use the neighbor route-server-client command in IPv4 or IPv6 address family configuration mode. To remove that neighbor as a " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor send-community", "cmd": "neighbor send-community\nno neighbor {ip-addressipv6-addresspeer-group-name} send-community", "desc": "To specify that a communities attribute should be sent to a BGP neighbor, use the neighbor send-community command in address family or router configuration mode. To remove the entry, use the no form o" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor shutdown", "cmd": "neighbor shutdown\nno neighbor {ip-addresspeer-group-name} shutdown graceful seconds [community", "desc": "To disable a neighbor or peer group or to gracefully shut down a link for maintenance, use the neighbor shutdown command in router configuration mode or address family configuration mode. To reenable " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor slow-peer detection", "cmd": "Router(config-router)# address-family ipv4\nRouter(config-router-af)# neighbor 10.4.4.4 slow-peer detection threshold 400\nRouter(config-router-af)# neighbor 10.4.4.4 slow-peer split-update-group dynamic\nRouter(config)# router bgp 100\nRouter(config-router)# bgp log-neighbor-changes\nRouter(config-router)# neighbor 4.4.4.4 remote-as 100\nRouter(config-router)# neighbor 6.6.6.6 remote-as 100\nRouter(config-router)# address-family ipv4\nRouter(config-router-af)# bgp slow-peer detection\nRouter(config-router-af)# neighbor 4.4.4.4 activate", "desc": "To specify a threshold time that dynamically determines a slow peer, use the neighbor slow-peer detection command in address-family configuration mode. To remove dynamic slow peer detection for a neig" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor slow-peer split-update-group static", "cmd": "Router(config-router)# address-family ipv4\nRouter(config-router-af)# neighbor 172.20.2.2 slow-peer split-update-group static", "desc": "To mark a BGP neighbor as a slow peer and move it to a slow update group, use the neighbor slow-peer split-update-group staticcommand in address-family configuration mode. To unmark the slow peer and " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor soft-reconfiguration", "cmd": "neighbor soft-reconfiguration\nno neighbor {ip-addresspeer-group-name} soft-reconfiguration inbound", "desc": "To configure the Cisco IOS software to start storing updates, use the neighbor soft-reconfiguration command in router configuration mode. To not store received updates, use the noform of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor soo", "cmd": "neighbor soo", "desc": "To set the site-of-origin (SoO) value for a Border Gateway Protocol (BGP) neighbor or peer group, use the neighbor soo command in address family IPv4 VRF configuration mode. To remove the SoO value fo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor suppress-signaling-protocol", "cmd": "Device(config-router-af)# neighbor 10.10.10.1 suppress-signaling-protocol ldp", "desc": "To suppress a Virtual Private LAN Service (VPLS) signaling protocol use the neighbor suppress-signaling-protocol command in address family configuration or router configuration mode. To remove the ent" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor timers", "cmd": "neighbor timers\nno neighbor [ip-addresspeer-group-name] timers", "desc": "To set the timers for a specific BGP peer or peer group, use the neighbor timers command in address family or router configuration mode. To clear the timers for a specific BGP peer or peer group, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor transport", "cmd": "Device# show ip bgp neighbors 10.4.4.4 | include path\nDevice#\nDevice# configure terminal\nDevice(config)# router bgp 100\nDevice(config-router)# neighbors 10.4.4.4 transport path-mtu-discovery disable\nDevice(config-router)# end\nDevice# show ip bgp neighbor 10.4.4.4 | include path", "desc": "To enable a TCP transport session option for a Border Gateway Protocol (BGP) session, use the neighbor transport command in router or address family configuration mode. To disable a TCP transport sess" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor ttl-security", "cmd": "neighbor ttl-security\nneighbor neighbor-address ttl-security hops hop-count\nno neighbor neighbor-address ttl-security hops hop-count", "desc": "To secure a Border Gateway Protocol (BGP) peering session and to configure the maximum number of hops that separate two external BGP (eBGP) peers, use the neighbor ttl-securitycommand in address-famil" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor unsuppress-map", "cmd": "neighbor unsuppress-map\nno neighbor {ip-addresspeer-group-name} unsuppress-map route-map-name", "desc": "To selectively advertise routes previously suppressed by the aggregate-address command, use the neighbor unsuppress-map command in address family or router configuration mode. To restore the system to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor update labeled-unicast unique", "cmd": "neighbor update labeled-unicast unique", "desc": "To change to \"label-unicast unique\" mode, which affects how a device operates in BGP sessions that include unlabeled and labeled unicast, use the neighbor neighbor-id update {in|out}labeled-unicast un" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor update-source", "cmd": "neighbor update-source", "desc": "To have the Cisco software allow Border Gateway Protocol (BGP) sessions to use any operational interface for TCP connections, use the neighbor update-source command in router configuration mode. To re" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor version", "cmd": "neighbor version\nneighbor {ip-addresspeer-group-name} version number\nno neighbor {ip-addresspeer-group-name} version number", "desc": "To configure the Cisco IOS software to accept only a particular BGP version, use the neighbor version command in router configuration mode. To use the default version level of a neighbor, use the nofo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "neighbor weight", "cmd": "neighbor weight\nneighbor {ip-addresspeer-group-name} weight number\nno neighbor {ip-addresspeer-group-name} weight number", "desc": "To assign a weight to a neighbor connection, use the neighbor weight command in address family or router configuration mode. To remove a weight assignment, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "network (BGP and multiprotocol BGP)", "cmd": "network (BGP and multiprotocol BGP)\nno network {network-number [mask network-mask]nsap-prefix} [route-map map-tag]", "desc": "To specify the networks to be advertised by the Border Gateway Protocol (BGP) and multiprotocol BGP routing processes, use the network command in address family or router configuration mode. To remove" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "network backdoor", "cmd": "network backdoor\nnetwork ip-address backdoor\nno network ip-address backdoor", "desc": "To specify a backdoor route to a BGP-learned prefix that provides better information about the network, use the network backdoor command in address family or router configuration mode. To remove an ad" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "redistribute (BGP to ISO IS-IS)", "cmd": "redistribute (BGP to ISO IS-IS)", "desc": "To redistribute routes from a Border Gateway Protocol (BGP) autonomous system into an International" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "redistribute (IP)", "cmd": "Device(config)# router bgp 109\nDevice(config-router)# redistribute ospf\nDevice(config)# router ospf 110\nDevice(config-router)# redistribute eigrp\nDevice(config)# router ospf 109\nDevice(config-router)# redistribute eigrp 108 metric 100 subnets\nDevice(config-router)# redistribute rip metric 200 subnets\nDevice(config)# router isis\nDevice(config-router)# redistribute bgp 120 metric 5 metric-type external\nDevice(config)# router ospf 4", "desc": "To redistribute routes from one routing domain into another routing domain, use the redistribute command in the appropriate configuration mode. To disable all or some part of the redistribution (depen" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "redistribute (ISO IS-IS to BGP)", "cmd": "Router(config)# router bgp 64352\nRouter(config-router)# redistribute isis osi-proc-6 clns\nRouter(config)# router bgp 404\nRouter(config-router)# address-family nsap\nRouter(config-router-af)# redistribute isis osi-proc-15 clns", "desc": "To redistribute routes from an International Organization for Standardization (ISO) Intermediate" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "redistribute dvmrp", "cmd": "redistribute dvmrp", "desc": "To configure redistribution of Distance VectorMulticast Routing Protocol (DVMRP) routes into multiprotocol" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "router bgp", "cmd": "router bgp\nrouter bgp autonomous-system-number\nno router bgp autonomous-system-number", "desc": "To configure the Border Gateway Protocol (BGP) routing process, use the router bgp command in global configuration mode. To remove a BGP routing process, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "route-server-context", "cmd": "route-server-context\nno form of this command.\nroute-server-context context-name\nno route-server-context context-name", "desc": "To create a route-server context in order to provide flexible policy handling for a BGP route server, use the route-server-context command in router configuration mode. To remove the route server cont" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "scope", "cmd": "Router(config)# router bgp 45000\nRouter(config-router)# scope global\nRouter(config-router-scope)# bgp default ipv4-unicast\nRouter(config-router-scope)# neighbor 172.16.1.2 remote-as 45000\nRouter(config-router-scope)# neighbor 192.168.3.2 remote-as 50000\nRouter(config-router-scope)# address-family ipv4 unicast\nRouter(config-router-scope-af)# topology VOICE\nRouter(config-router-scope-af)# bgp tid 100\nRouter(config-router-scope-af)# neighbor 172.16.1.2 activate\nRouter(config-router-scope-af)# exit", "desc": "To define the scope for a Border Gateway Protocol (BGP) routing session and to enter router scope configuration mode, use the scope command in router configuration mode. To remove the scope configurat" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set aigp-metric", "cmd": "Device# configure terminal\nDevice(config)# route-map rtmap\nDevice(config-route-map)# set aigp-metric igp-metric\nDevice(config-route-map)# exit", "desc": "To set the metric value for an accumulated interior gateway protocol (AIGP) attribute, use the set aigp-metric command in route-map configuration mode. To return to the default metric value, use the n" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set as-path", "cmd": "set as-path\nset as-path {tag | prepend as-path-string}\nno set as-path {tag | prepend as-path-string}", "desc": "BGP — set as-path" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set as-path replace", "cmd": "R1(config)#route-map test\nR1(config-route-map)# set as-path replace 100\nR1(config)#route-map test\nR1(config-route-map)# set as-path replace 5 78\nR1(config)#route-map test\nR1(config-route-map)# set as-path replace 100\nR1(config-route-map)# set as-path replace 6\nR1(config-route-map)# set as-path replace 5 78\nR1(config)#route-map test\nR1(config-route-map)# set as-path replace any", "desc": "To replace a sequence of ASNs to own autonomous system path for BGP routes, use the set as-path replace command in the route-map configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set comm-list delete", "cmd": "set comm-list delete\nno set comm-list {community-list-numbercommunity-list-name} delete", "desc": "To remove communities from the community attribute of an inbound or outbound update, use the set comm-list delete command in route-map configuration mode. To remove a previous set comm-list delete com" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set community", "cmd": "set community\nno set community", "desc": "To set the BGP communities attribute, use the set community route map configuration command. To delete the entry, use the no form of this command. set community {community-number [additive] [well-know" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set dampening", "cmd": "set dampening\nset dampening half-life reuse suppress max-suppress-time\nno set dampening", "desc": "To set the BGP route dampening factors, use the set dampening route map configuration command. To disable this function, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set extcomm-list delete", "cmd": "set extcomm-list delete\nset extcomm-list extended-community-list-number delete\nno set extcomm-list extended-community-list-number delete", "desc": "To allow the deletion of extended community attributes based on an extended community list, use the set extcomm-list delete command in route-map configuration mode. To negate a previous set extcomm-li" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": ".", "cmd": "Device(config-af)# neighbor 10.10.10.10 route-map extmap in\nDevice(config)# ip extcommunity-list 1 permit rt 100:3\nDevice(config)# route-map extmap permit 10\nDevice(config-route-map)# match extcommunity 1\nDevice(config-route-map)# set extcomm-list 1 delete\nDevice(config-route-map)# set extcommunity rt 100:4 additive\nDevice(config)# ip extcommunity-list 1 permit rt 100:3\nDevice(config)# ip extcommunity-list 2 permit rt 100:4\nDevice(config)# route-map extmap permit 10\nDevice(config-route-map)# match extcommunity 1", "desc": "BGP — ." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set extcommunity cost", "cmd": "Router(config)# router bgp 50000\nRouter(config-router)# neighbor 10.0.0.1 remote-as 50000\nRouter(config-router)# neighbor 10.0.0.1 update-source Loopback 0\nRouter(config-router)# address-family ipv4\nRouter(config-router-af)# neighbor 10.0.0.1 activate\nRouter(config-router-af)# neighbor 10.0.0.1 route-map COST1 in\nRouter(config-router-af)# neighbor 10.0.0.1 send-community both\nRouter(config-router-af)# exit\nRouter(config)# route-map COST1 permit 10\nRouter(config-route-map)# match ip-address 1", "desc": "To create a set clause to apply the cost community attribute to routes that pass through a route map, use the set extcommunity cost command in route-map configuration mode. To remove all set extcommun" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set extcommunity rt", "cmd": "Router(config)# access-list 2 permit 192.168.78.0 255.255.255.0\nRouter(config)# route-map MAP_NAME permit 10\nRouter(config-route-map)# match ip address 2\nRouter(config-route-map)# set extcommunity rt 100:2 100:3\nRouter(config)# access-list 3 permit 192.168.79.0 255.255.255.0\nRouter(config)# route-map MAP_NAME permit 10\nRouter(config-route-map)# match ip address 3\nRouter(config-route-map)# set extcommunity rt 100:3 additive\nRouter(config)# access-list 3 permit 192.168.79.0 255.255.255.0\nRouter(config)# route-map MAP_NAME permit 10", "desc": "To set Border Gateway Protocol (BGP) extended community attributes for route target, use the set extcommunity rt command in route-map configuration mode. To remove all set extcommunity cost , set extc" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set extcommunity soo", "cmd": "Router(config)# access-list 4 permit 192.168.80.0 255.255.255.0\nRouter(config)# route-map MAP_NAME permit 10\nRouter(config-route-map)# match ip address 4\nRouter(config-route-map)# set extcommunity soo 100:4\nRouter(config)# router bgp 100\nRouter(config-router)# address-family ipv6 vrf red\nRouter(config-router-af)# neighbor 2001:db8::72a remote-as 200\nRouter(config-router-af)# neighbor 2001:db8::72a activate\nRouter(config-router-af)# neighbor 2001:db8::72a route-map setsoo in\nRouter(config-router-af)# exit", "desc": "To set Border Gateway Protocol (BGP) extended community attribute for site of origin, use the set extcommunity soo command in route-map configuration mode. To remove all set extcommunity cost, set ext" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set extcommunity vpn-distinguisher", "cmd": "set extcommunity vpn-distinguisher\nend-range-value}\nno set extcommunity", "desc": "To create a set clause that applies a VPN distinguisher attribute to routes that pass through an outbound route map, use the set extcommunity vpn-distinguisher command in route-map configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set ip next-hop self (BGP)", "cmd": "set ip next-hop self (BGP)\nset ip next-hop self\nno set ip next-hop self", "desc": "To configure local routes with next hop of self (for Border Gateway Protocol (BGP) only), use the set ip next-hop self command in route-map configuration mode. To delete the configuration of local rou" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set ip next-hop (BGP)", "cmd": "set ip next-hop (BGP)\nset ip next-hop ip-address[...ip-address][peer-address]\nno set ip next-hop ip-address[...ip-address][peer-address]", "desc": "To indicate where to output packets that pass a match clause of a route map for policy routing, use the set ip next-hop command in route-map configuration mode. To delete an entry, use the no form of " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set ipv6 next-hop (BGP)", "cmd": "set ipv6 next-hop (BGP)\nno set ipv6 next-hop {ipv6-address [link-local-address] | encapsulate l3vpn profile name |\npeer-address}", "desc": "To indicate where to output IPv6 packets that pass a match clause of a route map for policy routing, use the set ipv6 next-hop command in route-map configuration mode. To delete an entry, use the no f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set metric (BGP-OSPF-RIP)", "cmd": "set metric (BGP-OSPF-RIP)", "desc": "To set the metric value for a routing protocol, use the setmetric command in route-map configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set metric-type internal", "cmd": "set metric-type internal\nset metric-type internal\nno set metric-type internal", "desc": "To set the Multi Exit Discriminator ( MED) value on prefixes advertised to external BGP (eBGP) neighbors to match the Interior Gateway Protocol (IGP) metric of the next hop, use the set metric-type in" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set origin (BGP)", "cmd": "set origin (BGP)\nno set origin {igp | egp autonomous-system-number | incomplete}", "desc": "To set the BGP origin code, use the set origin command in route-map configuration mode. To delete an entry, use the no form of this command. set origin {igp | egp autonomous-system-number | incomplete" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set traffic-index", "cmd": "set traffic-index\nset traffic-index bucket-number\nno set traffic-index bucket-number", "desc": "To indicate how to classify packets that pass a match clause of a route map for Border Gateway Protocol (BGP) policy accounting, use the set traffic-index command in route-map configuration mode. To d" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "set weight", "cmd": "set weight\nset weight number\nno set weight number", "desc": "To specify the BGP weight for the routing table, use the set weight command in route-map configuration mode. To delete an entry, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp all community", "cmd": "Router# show bgp all community local-as 111:12345\nRouter# show bgp all community 111:12345 local-as\nRouter# show bgp all community 1 2345 6789012 no-advertise local-as no-export exact-match", "desc": "To display routes for all address families belonging to a particular Border Gateway Protocol (BGP) community, use the show bgp all community command in user EXEC or privileged EXEC configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp all neighbors", "cmd": "Router# show bgp all neighbors", "desc": "To display information about Border Gateway Protocol (BGP) connections to neighbors of all address families, use the show bgp all neighbors command in user EXEC or privileged EXEC mode. show bgp all n" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp ipv6", "cmd": "Router# show bgp ipv6 unicast\nRouter# show bgp ipv6 unicast 3FFE:500::/24\nRouter# show bgp ipv6 unicast 2001:0DB8::/32\nRouter# show bgp ipv6 unicast labels\nRouter# show bgp ipv6 unicast", "desc": "To display entries in the IPv6 Border Gateway Protocol (BGP) routing table, use the show bgp ipv6command in user EXEC or privileged EXEC mode. show bgp ipv6 {unicast | multicast} [ipv6-prefix/prefix-l" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp ipv6 unicast rib-failure", "cmd": "Device# show bgp ipv6 unicast rib-failure", "desc": "To display the IPv6 Border Gateway Protocol (BGPv6) routes that fail to install in the Routing Information" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp l2vpn evpn", "cmd": "Device# show bgp l2vpn evpn all\nDevice# show bgp l2vpn evpn all route-type 1\nDevice# show bgp l2vpn evpn \nDevice# show ip bgp evpn ", "desc": "To display Layer 2 Virtual Private Network (L2VPN) Ethernet Virtual Private Network (EVPN) address family information from the BGP table, use the show bgp l2vpn evpn command in user EXEC or privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp l2vpn vpls", "cmd": "show bgp l2vpn vpls", "desc": "To display Layer 2 Virtual Private Network (L2VPN) Virtual Private LAN Service (VPLS) address family information from the Border Gateway Protocol (BGP) table, use the show bgp l2vpn vpls command in us" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp mvpn", "cmd": "Device# show bgp ipv4 mvpn vrf blue route-type 7 111.111.111.111:11111 55 202.100.0.6", "desc": "To display entries in the Border Gateway Protocol (BGP) routing table for multicast VPN (MVPN) sessions on the Cisco 10000 series router, use the show bgp mvpn command in the privileged EXEC mode. sho" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap", "cmd": "Router# show bgp nsap\nRouter# show bgp nsap 49.6005.1234.4567", "desc": "To display entries in the Border Gateway Protocol (BGP) routing table for the network service access point (NSAP) address family, use the show bgp nsapcommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap community", "cmd": "Router> show bgp nsap community local-as 111:12345\nRouter> show bgp nsap community 111:12345 local-as\nRouter# show bgp nsap unicast community no-export", "desc": "To display routes that belong to specified network service access point (NSAP) Border Gateway Protocol (BGP) communities, use the show bgp nsap community command in EXEC mode. show bgp nsap community " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap community-list", "cmd": "Router# show bgp nsap community-list 1\nRouter# show bgp nsap unicast community-list 1", "desc": "To display routes that are permitted by the Border Gateway Protocol (BGP) community list for network service access point (NSAP) prefixes, use the show bgp nsap community-list command in EXEC mode. sh" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap dampened-paths", "cmd": "Router# show bgp nsap dampened-paths", "desc": "To display network service access point (NSAP) address family Border Gateway Protocol (BGP) dampened routes in the BGP routing table, use the show bgp nsap dampened-paths command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap dampening", "cmd": "Router# show bgp nsap unicast dampening dampened-paths\nRouter# show bgp nsap unicast dampening flap-statistics", "desc": "To display network service access point (NSAP) address family Border Gateway Protocol (BGP) dampened routes in the BGP routing table, use the show bgp nsap dampening command in user EXEC or privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap filter-list", "cmd": "Router# show bgp nsap filter-list 1\nRouter# show bgp nsap unicast filter-list 1", "desc": "To display routes in the Border Gateway Protocol (BGP) routing table for the network service access point (NSAP) address family that conform to a specified filter list, use the show bgp nsap filter-li" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap flap-statistics", "cmd": "Router# show bgp nsap flap-statistics\nRouter# show bgp nsap unicast flap-statistics", "desc": "To display Border Gateway Protocol (BGP) flap statistics for network service access point (NSAP) prefixes, use the show bgp nsap flap-statistics command in EXEC mode. show bgp nsap flap-statistics [re" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap inconsistent-as", "cmd": "Router# show bgp nsap inconsistent-as\nRouter# show bgp nsap unicast inconsistent-as", "desc": "To display Border Gateway Protocol (BGP) network service access point (NSAP) prefix routes with inconsistent originating autonomous systems, use the show bgp nsap inconsistent-as command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap neighbors", "cmd": "Router# show bgp nsap neighbors 10.0.2.3\nRouter# show bgp nsap neighbors 10.0.2.3 advertised-routes\nRouter# show bgp nsap neighbors 10.0.2.3 routes\nRouter# show bgp nsap neighbors 10.0.3.3 paths ^101\nRouter# show bgp nsap neighbors 10.0.2.2 dampened-routes\nRouter# show bgp nsap neighbors 10.0.2.2 flap-statistics\nRouter# show bgp nsap unicast neighbors 10.0.2.3", "desc": "To display information about Border Gateway Protocol (BGP) network service access point (NSAP) prefix connections to neighbors, use the show bgp nsap neighbors command in EXEC mode. show bgp nsap neig" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap paths", "cmd": "Router# show bgp nsap paths\nRouter# show bgp nsap unicast paths", "desc": "To display all the Border Gateway Protocol (BGP) network service access point (NSAP) prefix paths in the database, use the show bgp nsap pathscommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap quote-regexp", "cmd": "Router# show bgp nsap quote-regexp \"202\"\nRouter# show bgp nsap unicast quote-regexp \"202\"", "desc": "To display Border Gateway Protocol (BGP) network service access point (NSAP) prefix routes matching the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap regexp", "cmd": "Router# show bgp nsap regexp ^202 101\nRouter# show bgp nsap unicast regexp ^202 101", "desc": "To display Border Gateway Protocol (BGP) network service access point (NSAP) prefix routes matching the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp nsap summary", "cmd": "Router# show bgp nsap summary\nRouter# show bgp nsap unicast summary", "desc": "To display the status of all Border Gateway Protocol (BGP) network service access point (NSAP) prefix connections, use the show bgp nsap summary command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp vpnv6 multicast", "cmd": "Router# show bgp vpnv6 multicast all", "desc": "To display Virtual Private Network Version 6 (VPNv6) multicast entries in a Border Gateway Protocol (BGP) table, use the show bgp vpnv6 multicast command in user EXEC or privileged EXEC mode. show bgp" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp vpnv6 unicast", "cmd": "Router# show bgp vpnv6 unicast all", "desc": "To display Virtual Private Network Version 6 (VPNv6) unicast entries in a Border Gateway Protocol (BGP) table, use the show bgp vpnv6 unicast command in user EXEC or privileged EXEC mode. show bgp vpn" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show bgp vpnv6 unicast rib-failure", "cmd": "Device# show bgp vpnv6 unicast vrf vpn1 rib-failure", "desc": "To display the VPNv6 Border Gateway Protocol (BGP) routes that fail to install in the Routing Information" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip as-path-access-list", "cmd": "Router# show ip as-path-access-list", "desc": "To display the contents of all current autonomous system (AS) path access lists, use the show ip as-path-access-list command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp", "cmd": "Device# show ip bgp\nDevice# show ip bgp\nDevice# show ip bgp 192.168.1.0\nDevice# show ip bgp 10.3.3.3 255.255.255.255\nDevice# show ip bgp all\nDevice# show ip bgp 10.92.0.0 255.255.0.0 longer-prefixes\nDevice# show ip bgp 172.16.0.0/16 shorter-prefixes 8\nDevice# show ip bgp prefix-list ROUTE\nDevice# show ip bgp route-map LEARNED_PATH\nDevice# show ip bgp 10.0.0.1 255.255.255.224", "desc": "To display entries in the Border Gateway Protocol (BGP) routing table, use the show ip bgp command in user EXEC or privileged EXEC mode. show ip bgp [ip-address [mask [longer-prefixes [injected] | sho" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp bmp", "cmd": "Device# show ip bgp bmp server 1\nDevice# show ip bgp bmp server 2\nDevice# show ip bgp bmp server summary\nDevice# show ip bgp bmp server neighbors", "desc": "To display information about the BGP Monitoring Protocol (BMP) servers and neighbors, use the show ip bgp bmp command in privileged EXEC mode. show ip bgp bmp {neighbors | server {server-number | deta" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp all dampening", "cmd": "Router# show ip bgp all dampening parameters\nRouter#\nRouter# show ip bgp all dampening dampened-paths", "desc": "To display BGP dampening information, use the show ip bgp all dampeningcommand in user EXEC or privileged EXEC mode. show ip bgp all dampening {dampened-paths | flap-statistics [filter-list filter-lis" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp cidr-only", "cmd": "Router# show ip bgp cidr-only", "desc": "To display routes with classless interdomain routing (CIDR), use the show ip bgp cidr-only command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp cluster-ids", "cmd": "Device# show ip bgp cluster-id", "desc": "To display the cluster IDs applied to any neighbor and other cluster information, use the show ip bgp cluster-ids command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp community", "cmd": "Router# show ip bgp community 111:12345 local-as\nRouter# show ip bgp community gshut", "desc": "To display routes that belong to specified BGP communities, use the show ip bgp community command in user EXEC or privileged EXEC mode. show ip bgp community [community-number] [gshut] [local-as] [no-" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp community-list", "cmd": "Router# show ip bgp community-list 20", "desc": "To display routes that are permitted by the Border Gateway Protocol (BGP) community list, use the show ip bgp community-list command in user EXEC or privileged EXEC mode. show ip bgp community-list {c" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp dampened-paths", "cmd": "Router# show ip bgp dampened-paths", "desc": "To display BGP dampened routes, use the show ip bgp dampened-paths command in user EXEC or privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp dampening dampened-paths", "cmd": "Router# show ip bgp dampening dampened-paths", "desc": "To display Border Gateway Protocol (BGP) dampened routes on the Cisco 10000 series router, use the show ip bgp dampening dampened-paths command in user EXEC or privileged EXEC mode. show ip bgp dampen" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp dampening flap-statistics", "cmd": "Router# show ip bgp dampening flap-statistics cidr-only", "desc": "To display Border Gateway Protocol (BGP) flap statistics for all paths on the Cisco 10000 series router, use the show ip bgp dampening flap-statistics command in privileged EXEC mode. show ip bgp damp" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp dampening parameters", "cmd": "Router# show ip bgp dampening parameters", "desc": "To display detailed Border Gateway Protocol (BGP) dampening information on the Cisco 10000 series router, use the show ip bgp dampening parameters command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp extcommunity-list", "cmd": "Router# show ip bgp extcommunity-list 1", "desc": "To display routes that match the extended community list in the Border Gateway Protocol (BGP) routing table, use the show ip bgp extcommunity-list command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp filter-list", "cmd": "Router# show ip bgp filter-list 2", "desc": "To display routes that conform to a specified filter list, use the show ip bgp filter-list command in EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp flap-statistics", "cmd": "Router# show ip bgp flap-statistics", "desc": "To display BGP flap statistics, use the show ip bgp flap-statistics command in EXEC mode. show ip bgp flap-statistics[regexp regexp | filter-list access-list | ip-address mask[longer-prefix]]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp inconsistent-as", "cmd": "Router# show ip bgp inconsistent-as", "desc": "To display routes with inconsistent originating autonomous systems, use the show ip bgp inconsistent-as command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp injected-paths", "cmd": "Router# show ip bgp injected-paths", "desc": "To display all the injected paths in the Border Gateway Protocol (BGP) routing table, use the show ip bgp injected-paths command in user or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp ipv4", "cmd": "Router# show ip bgp ipv4 unicast\nRouter# show ip bgp ipv4 multicast\nDevice# show ip bgp ipv4 unicast 150.1.1.0\nRouter# show ip bgp 172.230.70.96 bestpath-reason", "desc": "To display entries in the IP version 4 (IPv4) Border Gateway Protocol (BGP) routing table, use the show ip bgp ipv4 command in privileged EXEC mode. show ip bgp ipv4 {mdt {all | rd route-distinguisher" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp ipv4 multicast", "cmd": "Router# show ip bgp ipv4 multicast ?\nRouter# show ip bgp ipv4 multicast", "desc": "To display IP Version 4 multicast database-related information, use the show ip bgp ipv4 multicast command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp ipv4 multicast summary", "cmd": "Router# show ip bgp ipv4 multicast summary", "desc": "To display a summary of IP Version 4 multicast database-related information, use the show ip bgp ipv4 multicast summary command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp ipv6 multicast", "cmd": "show ip bgp ipv6 multicast\nshow ip bgp ipv6 multicast [prefix/length]", "desc": "To display multicast entries in the IPv6 BGP routing table, use the show ip bgp ipv6 multicast command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp ipv6 unicast", "cmd": "Router# show bgp ipv6 unicast 2010::1/128", "desc": "To display entries in the Internet Protocol version 6 (IPv6) Border Gateway Protocol (BGP) routing table, use the show ip bgp ipv6 unicast command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp l2vpn", "cmd": "Device# show ip bgp l2vpn vpls all\nDevice#show ip bgp l2vpn vpls all\nDevice# show ip bgp l2vpn vpls all summary\nDevice# show ip bgp l2vpn vpls rd 65000:3\nDevice# show ip bgp l2vpn vpls rd 45000:100\nDevice# show ip bgp l2vpn vpls all ve-id 31 block 30", "desc": "To display Layer 2 Virtual Private Network (L2VPN) address family information from the Border Gateway" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp neighbors", "cmd": "Device# show ip bgp neighbors 10.108.50.2\nRouter# show ip bgp neighbors\nDevice# show ip bgp neighbors 172.16.232.178 advertised-routes\nDevice# show ip bgp neighbors 10.10.10.1\nDevice# show ip bgp neighbors 172.29.232.178 paths 10\nDevice# show ip bgp neighbors 192.168.20.72 received prefix-filter\nDevice# show ip bgp neighbors 192.168.1.2 policy\nDevice# show ip bgp neighbors\nDevice# show ip bgp neighbors 172.16.1.2\nDevice# show ip bgp neighbors 192.168.3.2", "desc": "To display information about Border Gateway Protocol (BGP) and TCP connections to neighbors, use the show ip bgp neighbors command in user or privileged EXEC mode. show ip bgp [ipv4 {multicast | unica" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp path-attribute discard", "cmd": "Device# show ip bgp path-attribute discard", "desc": "To display all prefixes for which an attribute has been discarded, use the show ip bgp path-attribute discard command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp path-attribute unknown", "cmd": "Device# show ip bgp path-attribute unknown", "desc": "To display all prefixes that have an unknown attribute, use the show ip bgp path-attribute unknown command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp paths", "cmd": "Router# show ip bgp paths", "desc": "To display all the BGP paths in the database, use the show ip bgp paths command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp peer-group", "cmd": "Router# show ip bgp peer-group internal\nRouter# show ip bgp peer-group group192", "desc": "To display information about BGP peer groups, use the show ip bgp peer-group command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp quote-regexp", "cmd": "Router# show ip bgp quote-regexp \"^10_\" | begin 10.40\nRouter# show ip bgp quote-regexp “^65550$”", "desc": "To display routes matching the autonomous system path regular expression, use the show ip bgp quote-regexp command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp regexp", "cmd": "Router# show ip bgp regexp 108$\nRouter# show ip bgp regexp ^65536$\nRouter# show ip bgp regexp ^1\\.0$\nRouter# show ip bgp regexp ^1\\.14$", "desc": "To display routes matching the autonomous system path regular expression, use the show ip bgp regexp command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp replication", "cmd": "Router# show ip bgp replication\nRouter# show ip bgp replication 10.4.9.5", "desc": "To display update replication statistics for Border Gateway Protocol (BGP) update groups, use the show ip bgp replication command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp rib-failure", "cmd": "Router# show ip bgp rib-failure", "desc": "To display Border Gateway Protocol (BGP) routes that failed to install in the Routing Information Base (RIB) table, use the show ip bgp rib-failure command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp rpki servers", "cmd": "Router# show ip bgp rpki servers", "desc": "To display the current state of communication with the Resource Public Key Infrastructure (RPKI) cache servers, use the show ip bgp rpki servers command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp rpki table", "cmd": "Router# show ip bgp rpki table", "desc": "To display the currently cached list of networks and associated autonomous system (AS) numbers received from the Resource Public Key Infrastructure (RPKI) server, use the show ip bgp rpki table comman" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp rtfilter", "cmd": "Router# show ip bgp rtfilter all\nRouter# show ip bgp rtfilter all summary", "desc": "To display information about BGP route target (RT) filtering, use the show ip bgp rtfilter command in user" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp summary", "cmd": "Router# show ip bgp summary\nRouter# show ip bgp summary\nRouter# show ip bgp summary\nRouter# show ip bgp summary\nRouter# show ip bgp summary slow\nRouter> show ip bgp summary", "desc": "To display the status of all Border Gateway Protocol (BGP) connections, use the show ip bgp summary command in user EXEC or privileged EXEC mode. show ip bgp [ipv4 {multicast | unicast} | vpnv4 all | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp template peer-policy", "cmd": "Device# show ip bgp template peer-policy\nDevice# show ip bgp template peer-policy NETWORK1 detail", "desc": "To display locally configured peer policy templates, use the show ip bgp template peer-policy command in user EXEC or privileged EXEC mode. show ip bgp template peer-policy [policy-template-name [deta" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp template peer-session", "cmd": "Device# show ip bgp template peer-session\nDevice# show ip bgp template peer-session TS1", "desc": "To display peer policy template configurations, use the show ip bgp template peer-session command in user" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp unicast route-server", "cmd": "show ip bgp unicast route-server", "desc": "To display on a BGP route server which paths are chosen for a route server context, in particular if the normal bestpath was overridden or suppressed, use the show ip bgp unicast route-server command " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp update-group", "cmd": "Device# show ip bgp update-group\nDevice# show ip bgp update-group 10.4.9.8 summary\nDevice# show ip bgp update-group 1.1.1.1", "desc": "To display information about the Border Gateway Protocol (BGP) update groups, use the show ip bgp update-group command in user EXEC or privileged EXEC mode. show ip bgp update-group [index-groupip-add" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp vpnv4", "cmd": "Router# show ip bgp vpnv4 all\nRouter# show ip bgp vpnv4 rd 100:1 labels\nRouter# show ip bgp vpnv4 vrf vpn1\nRouter# show ip bgp vpnv4 vrf vpn1 192.168.9.0 255.255.255.0\nRouter# show ip bgp vpnv4 vrf xyz rib-failure\nRouter# show ip bgp vpnv4 all labels\nRouter# show ip bgp vpnv4 vrf vpn1 labels\nRouter# show ip bgp vpnv4 all labels\nRouter# show ip bgp vpnv4 vrf vpn1 labels\nRouter# show ip bgp vpnv4 all labels", "desc": "To display VPN Version 4 (VPNv4) address information from the Border Gateway Protocol (BGP) table, use the show ip bgp vpnv4 command in user EXEC or privileged EXEC mode. show ip bgp vpnv4 {all | rd r" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp vpnv4 all dampening", "cmd": "Router# show ip bgp vpnv4 all dampening flap-statistics\nRouter#", "desc": "To display BGP dampening information for the Virtual Private Network Version 4 (VPNv4) address family, use the show ip bgp vpnv4 all dampening command in user EXEC or privileged EXEC mode. show ip bgp" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp vpnv4 all sso summary", "cmd": "Router# show ip bgp vpnv4 all sso summary", "desc": "To display information about Border Gateway Protocol (BGP) peers that support BGP nonstop routing (NSR) with stateful switchover (SSO), use the show ip bgp vpn4 sso summary command in privileged EXECm" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip bgp vpnv6 unicast all dampening", "cmd": "Router# show ip bgp vpnv6 unicast all dampening flap-statistics\nR1#", "desc": "To display BGP dampening information for the Virtual Private Network Version 6 (VPNv6) address family, use the show ip bgp vpnv6 unicast all dampeningcommand in user EXEC or privileged EXEC mode. show" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip community-list", "cmd": "Router# show ip community-list", "desc": "To display co nfigured community lists, use the show ip community-list command in user or privileged show ip community-list [community-list-numbercommunity-list-name] [exact-match]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip extcommunity-list", "cmd": "Router# show ip extcommunity-list\nRouter# show ip extcommunity-list 1\nRouter# show ip extcommunity-list 1", "desc": "To display routes that are permitted by an extended community list, use the show ip extcommunity-list command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip policy-list", "cmd": "Router> show ip policy-list", "desc": "To display information about a configured policy list and policy list entries, use the show ip policy-list command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip prefix-list", "cmd": "Router# show ip prefix-list detail test", "desc": "To display information about a prefix list or prefix list entries, use the show ip prefix-list command in user" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip route", "cmd": "Device# show ip route\nDevice# show ip route\nDevice# show ip route 10.0.0.0 10.0.0.0 longer-prefixes\nDevice# show ip route\nDevice# show ip route static\nDevice# show ip route static download\nDevice# show ip route\nDevice# show ip route nhrp\nDevice# show ip route\nDevice# show ip route next-hop-override", "desc": "To display contents of the routing table, use the show ip route command in user EXEC or privileged EXEC show ip route [ip-address [repair-paths | next-hop-override [dhcp] |mask [longer-prefixes]] | pr" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip route vrf", "cmd": "Device# show ip route vrf vrf1\nDevice# show ip route vrf vrf1 bgp\nDevice# show ip route vrf PATH 10.22.22.0\nDevice# show ip route vrf vrf1 tag 5\nDevice# show ip route vrf v2 10.2.2.2\nDevice# show ip route vrf v2 10.2.2.2\nDevice# show ip route vrf v2 10.2.2.2\nDevice> show ip route vrf test1 repair-paths 192.168.3.0\nDevice#show ip route vrf * summary", "desc": "To display the IP routing table associated with a specific VPN routing and forwarding (VRF) instance, use the show ip route vrf command in user EXEC or privileged EXEC mode. show ip route vrf {vrf-nam" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tcp ha connections", "cmd": "Router# show tcp ha connections", "desc": "To display connection-ID-to-TCP mapping data, use the show tcp ha connections command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "slow-peer detection", "cmd": "Router(config)# router bgp 13\nRouter(config-router)# template peer-policy ipv4_ucast_pp1\nRouter(config-router-ptmp)# slow-peer detection threshold 360\nRouter(config-router-ptmp)# slow-peer split-update-group dynamic", "desc": "To use a policy template to specify a threshold time that dynamically determines a BGP slow peer, use the slow-peer detection command in policy template configuration mode. To restore the default valu" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tech-support bgp", "cmd": "show tech-support bgp\nvrf-instance-name}}] [detail]", "desc": "To automatically run show commands that display BGP related system information, use the show tech-support bgp command in the privileged EXEC mode. show tech-support bgp [address-family {all | ipv4 [fl" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "soo", "cmd": "soo\nsoo extended-community-value\nno soo", "desc": "To set the site-of-origin (SoO) value for a Border Gateway Protocol (BGP) peer policy template, use the soo command in policy-template configurationmode. To remove the SoO value, use the no form of th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "synchronization", "cmd": "synchronization\nsynchronization\nno synchronization", "desc": "To enable the synchronization between BGP and your Interior Gateway Protocol (IGP) system, use the synchronization command in address family or router configuration mode. To enable the Cisco IOS softw" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "table-map", "cmd": "table-map", "desc": "To specify a route map that modifies a metric, tag, or traffic index value (of routes that pass the route map) when the IP routing table is updated with BGP learned routes, or to selectively download " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "timers bgp", "cmd": "timers bgp\ntimers bgp keepalive holdtime [min-holdtime]\nno timers bgp", "desc": "To adjust BGP network timers, use the timers bgp command in router configuration mode. To reset the BGP timing defaults, use the noform of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "BGP", "title": "ve", "cmd": "Device(config-vfi-autodiscovery)# ve id 1001\nDevice(config-vfi-autodiscovery)# ve range 12", "desc": "To specify the Virtual Private LAN Service (VPLS) endpoint (VE) ID value or ID range value for a VPLS configuration, use the ve command in L2VPN VFI autodiscovery configuration mode. To remove the ent" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "address-family (EIGRP)", "cmd": "Router(config)# ip vrf RED\nRouter(config-vrf)# rd 1:1\nRouter(config-vrf)# exit\nRouter(config)# router eigrp 1\nRouter(config-router)# address-family ipv4 vrf RED\nRouter(config-router-af)# autonomous-system 101\nRouter(config-router-af)# network 172.16.0.0\nRouter(config-router-af)# default-metric 10000 100 255 1 1500\nRouter(config-router-af)# exit-address-family\nRouter(config)# ip vrf VRF-RED", "desc": "To enter address-family configuration mode to configure an Enhanced Interior Gateway Routing Protocol (EIGRP) routing instance, use the address-family (EIGRP) command in router configuration mode. To " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "af-interface", "cmd": "Router(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# af-interface default\nRouter(config-router-af-interface)# shutdown\nRouter(config-router-af-interface)# exit\nRouter(config-router-af)# af-interface Ethernet 0/0\nRouter(config-router-af)#", "desc": "To enter address-family interface configuration mode and to configure interface-specific Enhanced Interior" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "autonomous-system (EIGRP)", "cmd": "Router(config)# router eigrp 65200\nRouter(config-router)# address-family ipv4 vrf VRF2\nRouter(config-router-af)# autonomous-system 65500\nRouter(config)# router eigrp 65200\nRouter(config-router)# address-family ipv4 vrf VRF2 autonomous-system 65500", "desc": "To configure the autonomous-system number for an Enhanced Interior Gateway Routing Protocol (EIGRP) routing process to run within a VPN routing and forwarding (VRF) instance, use the autonomous-system" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "auto-summary (EIGRP)", "cmd": "Router(config)# router eigrp 109\nRouter(config-router)# auto-summary\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4473\nRouter(config-router-af)# topology base\nRouter(config-router-af-topology)# auto-summary", "desc": "To allow automatic summarization of subnet routes into network-level routes, use the auto-summary command in router configuration mode or address-family topology configuration mode. Todisable this fun" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "bfd (EIGRP)", "cmd": "Device(config)# router eigrp name\nDevice(config-router)# address-family ipv6 unicast autonomous-system 12\nDevice(config-router-af)# af-interface default\nDevice(config-router-af-interface)# bfd\nDevice(config)# router eigrp name\nDevice(config-router)# address-family ipv6 unicast autonomous-system 12\nDevice(config-router-af)# af-interface gigabitEthernet 0/0/1\nDevice(config-router-af-interface)# bfd\nDevice(config)# router eigrp name\nDevice(config-router)# address-family ipv6 vrf vrf1 autonomous-system 12", "desc": "To enable Bidirectional Forwarding Detection (BFD) on Enhanced Interior Gateway Routing Protocol (EIGRP)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear eigrp address-family neighbors", "cmd": "Router# clear eigrp address-family ipv4 neighbors 172.16.8.3\nRouter# clear eigrp address-family ipv4 vrf VRF1 101 neighbors\nRouter# clear eigrp address-family ipv4 vrf VRF1 101 neighbors ethernet0/0", "desc": "To delete entries from the Enhanced Interior Gateway Routing Protocol (EIGRP) neighbor table, use the clear eigrp address-family neighbors command in privileged EXEC mode. clear eigrp address-family {" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip eigrp neighbors", "cmd": "Router# clear ip eigrp neighbors 172.16.8.3\nRouter# clear ip eigrp vrf VRF1 101 neighbors\nRouter# clear ip eigrp vrf VRF1 101 neighbor ethernet0/0", "desc": "To delete entries from the Enhanced Interior Gateway Routing Protocol (EIGRP) neighbor table, use the clear ip eigrp neighbors command in privileged EXEC mode. clear ip eigrp [vrf vrf-name [autonomous" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ip eigrp vrf neighbors", "cmd": "Router# clear ip eigrp vrf RED 45000 neighbors\nRouter# clear ip eigrp vrf GREEN 45000 neighbors ethernet 0/0", "desc": "EIGRP — clear ip eigrp vrf neighbors" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ipv6 eigrp", "cmd": "Router# clear ipv6 eigrp neighbor 3FEE:12E1:2AC1:EA32", "desc": "To delete entries from Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv6 routing tables, use the clear ipv6 eigrp command in privileged EXEC mode. clear ipv6 eigrp [as-number] [neighbor [ipv" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "default-information", "cmd": "Router(config)#\nRouter(config-router)# default-information in\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4473\nRouter(config-router-af)#\nRouter(config-router-af-topology)# default-information in", "desc": "To accept exterior or default routing information into Enhanced Interior Gateway Routing Protocol (EIGRP) processes, use the default-information command in router configuration mode or address-family " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "default-metric (EIGRP)", "cmd": "Router(config)#\nRouter(config-router)#\nRouter(config-router)# redistribute rip\nRouter(config-router)#\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# af-interface default\nRouter(config-router-af-interface)# no shutdown\nRouter(config-router-af-interface)# exit\nRouter(config-router-af)# topology base", "desc": "To set metrics for Enhanced Interior Gateway Routing Protocol (EIGRP), use the default-metric command in router configuration mode or address-family topology configuration mode. To remove the metric v" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "distance (IPv6 EIGRP)", "cmd": "distance (IPv6 EIGRP)\ndistance internal-distance external-distance\nno distance", "desc": "To allow the use of two administrative distances--internal and external--that could be a better route to a node, use the distancecommand in router configuration mode. To reset these values to their de" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "distance eigrp", "cmd": "Router(config)# router eigrp 109\nRouter(config-router)# network 192.168.7.0\nRouter(config-router)# network 172.16.0.0\nRouter(config-router)# distance eigrp 80 130\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4473\nRouter(config-router-af)# topology base\nRouter(config-router-af-topology)# distance eigrp 80 130", "desc": "To allow the use of two administrative distances--internal and external--that could be a better route to a node, use the distance eigrp command in router configurationmode or address-family topology c" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "distribute-list prefix-list (IPv6 EIGRP)", "cmd": "Router(config)# ipv6 router eigrp 1\nRouter(config-router)# distribute-list prefix-list list1", "desc": "To apply a prefix list to Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv6 routing updates that are received or sent on an interface, use the distribute-list prefix-listcommand in router co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp default-route-tag", "cmd": "Device(config)# router eigrp name\nDevice(config-router)# address-family ipv4 unicast autonomous-system 1\nDevice(config-router-af)# eigrp default-route-tag 10.10.10.10\nDevice(config)# router eigrp name\nDevice(config-router)# address-family ipv4 unicast autonomous-system 1\nDevice(config-router-af)# eigrp default-route-tag 2", "desc": "To set a default route tag for all internal Enhanced Interior Gateway Routing Protocol (EIGRP) routes, use the eigrp default-route-tag command in address family configuration mode. To remove the defau" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp event-log-size", "cmd": "Router# configure terminal\nRouter(config)# router eigrp 2\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 1\nRouter(config-router-af)# topology base\nRouter(config-router-af-topology)# eigrp event-log-size 10000", "desc": "To set the size of the Enhanced Interior Gateway Routing Protocol (EIGRP) event log, use the eigrp event-log-size command in router configuration mode or address-family topology configuration mode. To" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp interface", "cmd": "eigrp interface", "desc": "EIGRP — eigrp interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp log-neighbor-changes", "cmd": "Router(config)# router eigrp 209\nRouter(config-router)# no eigrp log-neighbor-changes\nRouter(config)# router eigrp 209\nRouter(config-router)# eigrp log-neighbor-changes\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# no eigrp log-neighbor-changes\nRouter(config-router-af)# exit-address-family\nRouter(config)# router eigrp 209\nRouter(config-router)# service-family ipv4 autonomous-system 4453", "desc": "To enable the logging of changes in Enhanced Interior Gateway Routing Protocol (EIGRP) neighbor adjacencies, use the eigrp log-neighbor-changes command in router configuration mode, address-family con" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp log-neighbor-warnings", "cmd": "Router(config)# router eigrp 209\nRouter(config-router)# eigrp log-neighbor-warnings 300\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# service-family ipv4 autonomous-system 4453\nRouter(config-router-sf)# eigrp log-neighbor-warnings 300\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# eigrp log-neighbor-warnings 300", "desc": "To enable the logging of Enhanced Interior Gateway Routing Protocol (EIGRP) neighbor warning messages, use the eigrp log-neighbor-warnings command in router configuration mode, address-family configur" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp router-id", "cmd": "Router(config)# router eigrp 209\nRouter(config-router)# eigrp router-id 172.16.1.3\nRouter(config)# router eigrp 209\nRouter(config-router)# service-family ipv4 autonomous-system 4453\nRouter(config-router-sf)# eigrp router-id 172.16.1.3\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# eigrp router-id 172.16.1.3", "desc": "To set the router ID used by Enhanced Interior Gateway Routing Protocol (EIGRP) when communicating with its neighbors, use the eigrp router-idcommand in router configurationmode, address-family config" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp stub", "cmd": "Router(config)# router eigrp 1\nRouter(config-router)# network 10.0.0.0\nRouter(config-router)# eigrp stub\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# network 10.0.0.0\nRouter(config-router-af)# eigrp stub connected\nRouter(config)# router eigrp 1\nRouter(config-router)# network 10.0.0.0\nRouter(config-router)# eigrp stub connected static", "desc": "To configure a router as a stub using the Enhanced Interior Gateway Routing Protocol (EIGRP), use the eigrp stub command in address family configuration mode or router configuration mode. To disable t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "eigrp upgrade-cli", "cmd": "eigrp upgrade-cli\neigrp upgrade-cli name", "desc": "To enable the upgrade of Enhanced Interior Gateway Routing Protocol (EIGRP) classic mode configurations to namedmode, use the eigrp upgrade-cli command in router configurationmode under EIGRP classic " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "fast-reroute load-sharing disable (EIGRP)", "cmd": "Device(config)# router eigrp test\nDevice(config-router)# address-family ipv4 autonomous-system 1\nDevice(config-router-af)# topology base\nDevice(config-router-af-topology)# fast-reroute load-sharing disable", "desc": "To disable Fast Reroute (FRR) load sharing among Equal Cost Multipath (ECMP) loop-free alternates (LFAs) in an Enhanced Interior Gateway Routing Protocol (EIGRP) network, use the fast-reroute load-sha" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip authentication key-chain eigrp", "cmd": "ip authentication key-chain eigrp\nip authentication key-chain eigrp as-number key-chain\nno ip authentication key-chain eigrp as-number key-chain", "desc": "To enable authentication of Enhanced Interior Gateway Routing Protocol (EIGRP) packets, use the ip authentication key-chain eigrpcommand in interface configuration mode. To disable such authentication" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip authentication mode eigrp", "cmd": "ip authentication mode eigrp\nip authentication mode eigrp as-number md5\nno ip authentication mode eigrp as-number md5", "desc": "To specify the type of authentication used in Enhanced Interior Gateway Routing Protocol (EIGRP) packets, use the ip authentication mode eigrpcommand in interface configuration mode. To disable that t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 authentication mode eigrp", "cmd": "Router(config-if)# ipv6 authentication mode eigrp 1 md5", "desc": "To specify the type of authentication used in Enhanced Interior Gateway Routing Protocol (EIGRP) packets for IPv6, use the ipv6 authentication mode eigrpcommand in interface configuration mode. To dis" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip bandwidth-percent eigrp", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# bandwidth 56\nRouter(config-if)# ip bandwidth-percent eigrp 209 75", "desc": "To configure the percentage of bandwidth that may be used by Enhanced Interior Gateway Routing Protocol (EIGRP) on an interface, use the ip bandwidth-percent eigrpcommand in interface configuration mo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip hello-interval eigrp", "cmd": "Router(config)# interface ethernet 0\nRouter(config-if)# ip hello-interval eigrp 109 10", "desc": "To configure the hello interval for an Enhanced Interior Gateway Routing Protocol (EIGRP) process, use the ip hello-interval eigrp command in interface configuration mode. To restore the default value" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip hold-time eigrp", "cmd": "Router(config)# interface ethernet 0\nRouter(config-if)# ip hold-time eigrp 109 40", "desc": "To configure the hold time for an Enhanced Interior Gateway Routing Protocol (EIGRP) process, use the ip hold-time eigrp command in interface configuration mode. To restore the default value, use the " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip next-hop-self eigrp", "cmd": "Device(config)# interface tun 0\nDevice(config-if)# no ip next-hop-self eigrp 101 no-ecmp-mode", "desc": "To enable the Enhanced Interior Gateway Routing Protocol (EIGRP) to advertise routes with the local outbound interface address as the next hop, use the ip next-hop-self eigrp command in interface conf" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip split-horizon eigrp", "cmd": "ip split-horizon eigrp\nip split-horizon eigrp as-number\nno ip split-horizon eigrp as-number", "desc": "To enable Enhanced Interior Gateway Routing Protocol (EIGRP) split horizon, use the ip split-horizon eigrp command in interface configuration mode. To disable split horizon, use the no form of this co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ip summary-address eigrp", "cmd": "Router(config)# router eigrp 1\nRouter(config-router)# no auto-summary\nRouter(config-router)# exit\nRouter(config)# interface Ethernet 0/0\nRouter(config-if)# ip summary-address eigrp 1 192.168.0.0 255.255.0.0 95\nRouter(config)# router eigrp 1\nRouter(config-router)# exit\nRouter(config)# access-list 1 permit 10.1.1.0 0.0.0.255\nRouter(config)# route-map LEAK-10-1-1 permit 10\nRouter(config-route-map)# match ip address 1", "desc": "To configure address summarization for the Enhanced Interior Gateway Routing Protocol (EIGRP) on a specified interface, use the ip summary-address eigrp command in interface configuration or virtual n" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 authentication key-chain eigrp", "cmd": "Router(config-if)# ipv6 authentication key-chain eigrp 1 chain1", "desc": "To enable authentication of Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv6 packets, use the ipv6 authentication key-chain eigrpcommand in interface configuration mode. To disable authenti" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 bandwidth-percent eigrp", "cmd": "ipv6 bandwidth-percent eigrp\nipv6 bandwidth-percent eigrp as-number percent\nno ipv6 bandwidth-percent eigrp as-number percent", "desc": "To configure the percentage of bandwidth that may be used by Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv6 on an interface, use the ipv6 bandwidth-percent eigrpcommand in interface confi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 eigrp", "cmd": "Router(config)# interface ethernet0\nRouter(config-if)# ipv6 eigrp 1", "desc": "To enable Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv6 on a specified interface, use the ipv6 eigrp command in interface configuration mode. To disable EIGRP for IPv6, use the no form o" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 hello-interval eigrp", "cmd": "ipv6 hello-interval eigrp\nipv6 hello-interval eigrp as-number seconds\nno ipv6 hello-interval eigrp as-number seconds", "desc": "To configure the hello interval for the Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv6 routing process designated by an autonomous system number, use the ipv6 hello-interval eigrp command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 hold-time eigrp", "cmd": "ipv6 hold-time eigrp\nipv6 hold-time eigrp as-number seconds\nno ipv6 hold-time eigrp as-number seconds", "desc": "To configure the hold time for a particular Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv6 routing process designated by the autonomous system number, use the ipv6 hold-time eigrpcommand " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 next-hop-self eigrp", "cmd": "Device(config)# interface serial 0\nDevice(config-if)# no ipv6 next-hop-self eigrp 1 no-ecmp-mode", "desc": "To instruct a device configured with the Enhanced Interior Gateway Routing Protocol (EIGRP) that the IPv6 next hop is the local outbound interface address, use the ipv6 next-hop-self eigrp command in " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 router eigrp", "cmd": "Router(config)# ipv6 router eigrp 400", "desc": "To place the router in router configuration mode, create an Enhanced Interior Gateway Routing Protocol (EIGRP) routing process in IPv6, and configure this process, use the ipv6router eigrpcommand in g" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 split-horizon eigrp", "cmd": "ipv6 split-horizon eigrp\nipv6 split-horizon eigrp as-number\nno ipv6 split-horizon eigrp as-number", "desc": "To enable Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv6 split horizon, use the ipv6split-horizon eigrpcommand in interface configuration mode. To disable split horizon, use the no form o" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "ipv6 summary-address eigrp", "cmd": "ipv6 summary-address eigrp\nno ipv6 summary-address eigrp as-number ipv6-address [admin-distance]", "desc": "To configure a summary aggregate address for a specified interface, use the ipv6summary-address eigrpcommand in interface configuration mode. To disable a configuration, use the no form of this comman" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "log-neighbor-changes (EIGRP)", "cmd": "log-neighbor-changes (EIGRP)\nlog-neighbor-changes\nno log-neighbor-changes", "desc": "To enable the logging of changes in Enhanced Interior Gateway Routing Protocol (EIGRP) neighbor adjacencies, use the log-neighbor-changescommand in IPX-router configuration mode. To disable this funct" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "log-neighbor-changes (IPv6 EIGRP)", "cmd": "log-neighbor-changes (IPv6 EIGRP)\nlog-neighbor-changes\nno log-neighbor-changes", "desc": "To enable the logging of changes in Enhanced Interior Gateway Routing Protocol (EIGRP) IPv6 neighbor adjacencies, use the log-neighbor-changes command in router configuration mode. To disable the logg" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "log-neighbor-warnings", "cmd": "Router(config)# ipv6 router eigrp 1\nRouter(config-router)# log-neighbor-warnings 300", "desc": "EIGRP — log-neighbor-warnings" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "match tag list", "cmd": "Device(config)# route-map map1\nDevice(config-route-map)# match tag list list1", "desc": "To filter routes that match a specified route tag list, use thematch tag list command in route-map configuration mode. To remove the route tag list entry, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "maximum-prefix", "cmd": "Router(config)# router eigrp 100\nRouter(config-router)# address-family ipv4 vrf VRF1\nRouter(config-router-af)# maximum-prefix 50000\nRouter(config-router-af)# end\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# topology base\nRouter(config-router-af-topology)# maximum-prefix 50000", "desc": "To limit the number of prefixes that are accepted under an address family by an Enhanced Interior Gateway" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "metric holddown", "cmd": "Router(config)# router eigrp 15\nRouter(config-router)# network 172.16.0.0\nRouter(config-router)# network 192.168.7.0\nRouter(config-router)# no metric holddown", "desc": "To keep new Enhanced Interior Gateway Routing Protocol (EIGRP) routing information from being used for a certain period of time, use the metric holddown command in router configuration mode. To disabl" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "metric maximum-hops", "cmd": "Router(config)# router eigrp 71\nRouter(config-router)# network 172.16.0.0\nRouter(config-router)#\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# topology base\nRouter(config-router-af-topology)# metric maximum-hops 200", "desc": "To have the IP routing software advertise as unreachable routes with a hop count higher than is specified by the command (Enhanced Interior Gateway Routing Protocol [EIGRP] only), use the metric maxim" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "metric rib-scale", "cmd": "Router# configure terminal\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4533\nRouter(config-router-af)# metric rib-scale 100", "desc": "To set the Routing Information Base (RIB) scaling factor for the Enhanced Interior Gateway Routing Protocol (EIGRP), use the metric rib-scale command in address family configuration mode. To remove th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "metric weights (EIGRP)", "cmd": "Router(config)# router eigrp 109\nRouter(config-router)# network 192.168.0.0\nRouter(config-router)# metric weights 0 2 0 2 0 0\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4533\nRouter(config-router-af)# metric weights 0 2 0 2 0 0 1", "desc": "To tune the Enhanced Interior Gateway Routing Protocol (EIGRP) metric calculations, use themetric weights command in router configuration mode or address family configuration mode. To reset the values" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "neighbor (EIGRP)", "cmd": "Router(config)# router eigrp 1\nRouter(config-router)# network 192.168.0.0\nRouter(config-router)# neighbor 192.168.1.1 Ethernet 0/0\nRouter(config-router)# neighbor 192.168.2.2 Ethernet 1/1\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# neighbor 192.168.1.1 ethernet 0/0\nRouter(config-router-af)# neighbor 10.1.1.2 loopback 0 remote 10\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453", "desc": "To define a neighboring device with which an Enhanced Interior Gateway Routing Protocol (EIGRP) device can exchange routing information, use the neighbor command in router configuration mode or addres" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "network (EIGRP)", "cmd": "Router(config)# router eigrp 1\nRouter(config-router)# network 172.16.0.0\nRouter(config-router)# network 192.168.0.0\nRouter(config-router)# network 192.168.0.0 0.0.255.255\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# network 172.16.0.0\nRouter(config-router-af)# network 192.168.0.0", "desc": "To specify the network for an Enhanced Interior Gateway Routing Protocol (EIGRP) routing process, use the network command in router configuration mode or address-family configuration mode. To remove a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "next-hop-self", "cmd": "Device(config)# router eigrp virtual-name\nDevice(config-router)# address-family ipv4 autonomous-system 33\nDevice(config-router-af)# af-interface ethernet0/0\nDevice(config-router-af-interface)# no next-hop-self no-ecmp-mode\nDevice(config)# router eigrp virtual-name\nDevice(config-router)# address-family ipv6 autonomous-system 33\nDevice(config-router-af)# af-interface ethernet0/0\nDevice(config-router-af-interface)# no next-hop-self no-ecmp-mode", "desc": "To enable the Enhanced Interior Gateway Routing Protocol (EIGRP) to advertise routes with the local outbound interface address as the next hop, use the next-hop-self command in address family interfac" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "nsf (EIGRP)", "cmd": "Device# configure terminal\nDevice(config)# router eigrp 101\nDevice(config-router)# no nsf\nDevice(config-router)# end\nDevice# configure terminal\nDevice(config)# router eigrp virtual-name-1\nDevice(config-router)# address-family ipv6 autonomous-system 10\nDevice(config-router-af)# nsf\nDevice(config-router-af)# end", "desc": "To enable Cisco nonstop forwarding (NSF) operations for the Enhanced Interior Gateway Routing Protocol (EIGRP), use the nsf command in router configuration or address family configuration mode. To dis" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "offset-list (EIGRP)", "cmd": "Router(config-router)# offset-list 21 out 10\nRouter(config-router)# offset-list 21 in 10 ethernet 0\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 1\nRouter(config-router-af)# topology base\nRouter(config-router-af-topology)# offset-list 21 in 10 ethernet0", "desc": "To add an offset to incoming and outgoing metrics to routes learned via Enhanced Interior Gateway Routing" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "passive-interface (EIGRP)", "cmd": "Router(config)# router eigrp 109\nRouter(config-router)# passive-interface default\nRouter(config-router)# no\nRouter(config)# router eigrp 109\nRouter(config-router)# address-family ipv4 vrf RED\nRouter(config-router-af)# passive-interface default\nRouter(config-router-af)# no passive-interface ethernet0/0\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# af-interface default", "desc": "To suppress Enhanced Interior Gateway Routing Protocol (EIGRP) hello packets and routing updates on interfaces while still including the interface addresses in the topology database, use the passive-i" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "populate bgp-extn-comm", "cmd": "Device> enable\nDevice# configure terminal\nDevice(config)# router eigrp test\nDevice(config-router)# address-family ipv4 vrf vrf1 autonomous-system 1\nDevice(config-router-af)# no populate bgp-extn-comm\nDevice(config-router-af)# end", "desc": "To enable sending Enhanced Interior Gateway Routing Protocol characteristics as extended communities to neighboring devices through the Border Gateway Protocol (BGP), use the populate bgp-extn-comm co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "router eigrp", "cmd": "Router(config)# router eigrp 109\nRouter(config)#", "desc": "To configure the Enhanced Interior Gateway Routing Protocol (EIGRP) routing process, use the router eigrp command in global configuration mode. To remove an EIGRP routing process, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "route-tag list", "cmd": "Device(config)# route-tag list list1 permit 1.1.1.1 0.0.0.1\nDevice(config)# route-tag list list1 sequence 5 permit 10.10.10.0 0.0.0.0", "desc": "To create a route tag list, use the route-tag list command in global configuration mode. To remove the route tag list, use the no form of this command. route-tag list list-name {deny | permit | sequen" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "route-tag notation", "cmd": "Device(config)# route-tag notation dotted-decimal", "desc": "To enable the display of route tag values in dotted-decimal format, use the route-tag notation command in global configuration mode. To disable this functionality, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "set metric (EIGRP)", "cmd": "Router(config-route-map)# set metric 10000 10 255 1 1500", "desc": "To set the metric value for Enhanced Interior Gateway Routing Protocol (EIGRP) in a route map, use the set metric route-map configuration command. To return to the default metric value, use the no for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "set tag (IP)", "cmd": "Device(config)# route-map tag\nDevice(config-route-map)# set tag 5\nDevice(config)# route-map tag\nDevice(config-route-map)# set tag 10.10.10.10", "desc": "To set a tag value for a route in a route map, use the set tag command in route-map configuration mode. To delete the entry, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show eigrp address-family accounting", "cmd": "Router# show eigrp address-family ipv4 22 accounting", "desc": "To display prefix accounting information for Enhanced Interior Gateway Routing Protocol (EIGRP) processes, use the show eigrp address-family accounting command in user EXEC or privileged EXEC mode. sh" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show eigrp address-family events", "cmd": "Router# show eigrp address-family ipv4 3 events", "desc": "To display information about Enhanced Interior Gateway Routing Protocol (EIGRP) address-family events, use the show eigrp address-family eventscommand in user EXEC or privileged EXEC mode. show eigrp " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show eigrp address-family interfaces", "cmd": "Device# show eigrp address-family ipv4 4453 interfaces\nDevice# show eigrp address-family ipv4 2 interfaces detail Loopback1\nDevice# show eigrp address-family ipv6 interfaces detail", "desc": "To display information about interfaces that are configured for Enhanced Interior Gateway Routing Protocol (EIGRP), use the show eigrp address-family interfaces command in user EXEC or privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show eigrp address-family neighbors", "cmd": "Device# show eigrp address-family ipv4 4453 neighbors\nDevice# show eigrp address-family ipv4 neighbors detail\nDevice# show eigrp address-family ipv6 neighbors detail", "desc": "To display neighbors that are discovered by the Enhanced Interior Gateway Routing Protocol (EIGRP), use the show eigrp address-family neighbors command in user EXEC or privileged EXEC mode. show eigrp" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show eigrp address-family timers", "cmd": "Router# show eigrp address-family ipv4 4453 timers", "desc": "To display information about Enhanced Interior Gateway Routing Protocol (EIGRP) timers and expiration times, use the show eigrp address-family timers command in user EXEC or privileged EXEC mode. show" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show eigrp address-family topology", "cmd": "Device# show eigrp address-family ipv4 4453 topology\nDevice# show eigrp address-family ipv4 4453 topology 10.10.10.0/24", "desc": "To display Enhanced Interior Gateway Routing Protocol (EIGRP) address-family topology table entries, use the show eigrp address-family topology command in user EXEC or privileged EXEC mode. {ipv4 [mul" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show eigrp address-family traffic", "cmd": "Router# show eigrp address-family ipv4 4453 traffic", "desc": "To display the number of Enhanced Interior Gateway Routing Protocol (EIGRP) packets that are sent and received, use the show eigrp address-family trafficcommand in user EXEC or privileged EXEC mode. s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show eigrp plugins", "cmd": "Router# show eigrp plugins", "desc": "To display general information including the versions of the Enhanced Interior Gateway Routing Protocol (EIGRP) protocol features that are currently running, use the show eigrp plugins command in user" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show eigrp protocols", "cmd": "Device# show eigrp protocols\nDevice# show eigrp protocols vrf vrf1", "desc": "To display general information about Enhanced Interior Gateway Routing Protocol (EIGRP) protocols that are currently running, use the show eigrp protocols command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show eigrp tech-support", "cmd": "Device# show eigrp tech-support detailed", "desc": "To generate a report of the Enhanced Interior Gateway Routing Protocol (EIGRP) internal state information, use the show eigrp tech-support command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip eigrp accounting", "cmd": "Router# show ip eigrp vrf RED accounting", "desc": "To display prefix accounting information for Enhanced Interior Gateway Routing Protocol (EIGRP) processes, use the show ip eigrp accountingcommand in privileged EXEC mode. show ip eigrp [vrf {vrf-name" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip eigrp events", "cmd": "Router# show ip eigrp events", "desc": "To display the Enhanced Interior Gateway Routing Protocol (EIGRP) event log, use the show ip eigrp events command in user EXEC or privileged EXEC mode. show ip eigrp [vrf vrf-name] events [[errmsg | s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip eigrp interfaces", "cmd": "Device# show ip eigrp interfaces\nDevice# show ip eigrp interfaces detail\nDevice# show ip eigrp interfaces detail tunnel 0", "desc": "To display information about interfaces that are configured for the Enhanced Interior Gateway Routing Protocol (EIGRP), use the show ip eigrp interfaces command in user EXEC or privileged EXEC mode. s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip eigrp neighbors", "cmd": "Router# show ip eigrp neighbors\nRouter# show ip eigrp neighbors detail", "desc": "To display neighbors discovered by the Enhanced Interior Gateway Routing Protocol (EIGRP), use the show ip eigrp neighbors command in privileged EXEC mode. show ip eigrp [vrf vrf-name] [autonomous-sys" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip eigrp topology", "cmd": "Device# show ip eigrp topology\nDevice# show ip eigrp topology 10.0.0.0/8\nDevice# show ip eigrp topology 172.16.1.0/24\nDevice# show ip eigrp topology 192.168.10.0/24\nDevice# show ip eigrp topology all-links\nDevice# show ip eigrp topology detail-links\nDevice# show ip eigrp topology frr\nDevice# show ip eigrp topology\nDevice# show ip eigrp topology\nDevice# show ip eigrp topology", "desc": "To display Enhanced Interior Gateway Routing Protocol (EIGRP) topology table entries, use the show ip eigrp topology command in user EXEC or privileged EXEC mode. show ip eigrp topology[vrf vrf-nameau" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip eigrp vrf interfaces", "cmd": "Router# show ip eigrp vrf VRF-PINK interfaces", "desc": "EIGRP — show ip eigrp vrf interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip eigrp vrf neighbors", "cmd": "Router# show ip eigrp vrf VRF-GREEN neighbors", "desc": "EIGRP — show ip eigrp vrf neighbors" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip eigrp vrf topology", "cmd": "Device# show ip eigrp vrf VRF1 topology", "desc": "To display VPN routing and forwarding (VRF) entries in the Enhanced Interior Gateway Routing Protocol (EIGRP) topology table, use the show ip eigrp vrf topology command in user EXEC or privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip eigrp vrf traffic", "cmd": "Router# show ip eigrp vrf VRF-RED traffic", "desc": "EIGRP — show ip eigrp vrf traffic" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip route tag", "cmd": "Device# show ip route tag 1.1.1.1\nDevice# show ip route tag 10.10.10.0 0.0.0.7", "desc": "To display route tag entries for IPv4 routes, use the show ip route tag command in user EXEC or privileged show ip route tag {tag-value | tag-value-dotted-decimal [mask]}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ipv6 eigrp events", "cmd": "Router# show ipv6 eigrp events", "desc": "To display Enhanced Interior Gateway Routing Protocol (EIGRP) events logged for IPv6, use the show ipv6 eigrp events command in user EXEC or privileged EXEC mode. show ipv6 eigrp events [[errmsg | sia" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ipv6 eigrp interfaces", "cmd": "Device# show ipv6 eigrp 1 interfaces\nDevice# show ipv6 eigrp interfaces detail\nDevice# show ipv6 eigrp interfaces detail tunnel 0", "desc": "To display information about interfaces configured for the Enhanced Interior Gateway Routing Protocol (EIGRP) in IPv6 topologies, use the show ipv6 eigrp interfaces command in user EXEC or privileged " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ipv6 eigrp neighbors", "cmd": "Router# show ipv6 eigrp neighbors\nRouter# show ipv6 eigrp neighbors detail\nRouter# show ipv6 eigrp neighbors static", "desc": "To display the neighbors discovered by Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv6, use the show ipv6 eigrp neighbors command in user EXEC or privileged EXEC mode. show ipv6 eigrp neig" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ipv6 eigrp topology", "cmd": "Device# show ipv6 eigrp topology\nDevice# show ipv6 eigrp topology 2001:DB8:10::1/128", "desc": "To display Enhanced Interior Gateway Routing Protocol (EIGRP) IPv6 topology table entries, use the show ipv6 eigrp topology command in user EXEC or privileged EXEC mode. show ipv6 eigrp topology [as-n" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ipv6 eigrp traffic", "cmd": "Router# show ipv6 eigrp traffic", "desc": "To display the number of Enhanced Interior Gateway Routing Protocol (EIGRP) for IPv6 packets sent and received, use the show ipv6 eigrp traffic command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ipv6 route tag", "cmd": "Device# show ipv6 route tag 0.0.10.10\nDevice# show ipv6 route tag 0.0.0.10 0.0.0.7", "desc": "To display route tag entries for IPv6 routes, use the show ipv6 route tag command in user EXEC or privileged show ipv6 route tag {tag-value | tag-value-dotted-decimal [mask]}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show route-tag list", "cmd": "Device# show route-tag list", "desc": "To display information about route tag lists configured on the router, use the show route-tag list command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "shutdown (address-family)", "cmd": "Router(config)# router eigrp virtual-name\nRouter(config-router)# shutdown\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# shutdown\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# af-interface default\nRouter(config-router-af-interface)# shutdown", "desc": "To disable the Enhanced Interior Gateway Routing Protocol (EIGRP) address-family protocol for a specific routing instance without removing any existing address-family configuration parameters, use the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "stub", "cmd": "stub", "desc": "EIGRP — stub" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "timers active-time", "cmd": "Router(config)# router eigrp 5\nRouter(config-router)# timers active-time 200\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# network 10.0.0.0\nRouter(config-router-af)# topology base\nRouter(config-router-af-topology)# timers active-time 200\nRouter(config)# router eigrp 5\nRouter(config-router)# timers active-time disabled\nRouter(config)# router eigrp virtual-name", "desc": "To adjust Enhanced Interior Gateway Routing Protocol (EIGRP) routing wait time, use the timers active-time command in router configuration mode or address-family topology configuration mode. To disabl" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "timers nsf route-hold", "cmd": "Router(config-router)# timers nsf route-hold 120", "desc": "EIGRP — timers nsf route-hold" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "timers nsf signal", "cmd": "Device(config)# router eigrp virtual-name-1\nDevice(config-router)# address-family ipv4 autonomous-system 1\nDevice(config-router-af)# timers nsf signal 30\nDevice(config)# router eigrp e1\nDevice(config-router)# address-family ipv6 autonomous-system 1\nDevice(config-router-af)# timers nsf signal 30", "desc": "To adjust the maximum time for the initial signal timer restart period, use the timers nsf signal command in router configuration or address family configuration mode. To return the signal timer to th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "topology (EIGRP)", "cmd": "Device(config)# router eigrp 1\nDevice(config-router)# address-family ipv4 unicast autonomous-system 3\nDevice(config-router-af)# topology VOICE tid 100\nDevice(config-router-af-topology)# no auto-summary\nDevice(config-router-af-topology)# network 192.168.0.0 0.0.255.255\nDevice(config-router-af-topology)# end", "desc": "To configure an Enhanced Interior Gateway Routing Protocol (EIGRP) process to route IP traffic under the specified topology instance and to enter address-family topology configuration mode, use the to" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "traffic-share balanced", "cmd": "Router(config)# router eigrp 5\nRouter(config-router)# traffic-share balanced\nRouter(config-router)# variance 1\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# network 10.0.0.0\nRouter(config-router-af)# topology base\nRouter(config-router-af-topology)# traffic-share balanced\nRouter(config-router-af-topology)# variance 1", "desc": "To c ontrol how traffic is distributed among routes when multiple routes for the same destination network have different costs, use the traffic-share balancedcommand in router configuration mode or ad" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "variance (EIGRP)", "cmd": "Router(config)# router eigrp 109\nRouter(config-router)# variance 4\nRouter(config)# router eigrp virtual-name\nRouter(config-router)# address-family ipv4 autonomous-system 4453\nRouter(config-router-af)# network 10.0.0.0\nRouter(config-router-af)# topology base\nRouter(config-router-af-topology)# variance 4", "desc": "To control load balancing in an internetwork based on the Enhanced Interior Gateway Routing Protocol (EIGRP), use the variance command in router configuration mode or address-family topology configura" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "EIGRP", "title": "vnet", "cmd": "Router(config)# interface gigabitethernet 1/1/1\nRouter(config)# interface gigabitethernet1/1/1", "desc": "To override interface configurations on a per-virtual routing and forwarding (VRF) basis, use the vnet command in the appropriate configuration mode. To remove VRF-specific configurations, use the no " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "1pps", "cmd": "Router# configure terminal\nRouter(config)# gnss slot r0\nRouter(config-gnss)# 1pps polarity negative", "desc": "To configure the pulse per second parameters of the global navigation satellite system (GNSS) module on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ais-shut", "cmd": "ais-shut\nais-shut\nno ais-shut", "desc": "To enable automatic insertion of a Line Alarm Indication Signal (LAIS) in the sent SONET signal whenever the SONET port enters the administrative shutdown state, use the ais-shut command in SONET conf" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "alarm-interface", "cmd": "Router(config)# alarm-interface 5\nRouter(config-aic)# ip address 10.2.130.105\nRouter(config-aic)# reset\nRouter(config-aic)# end", "desc": "To enter alarm-interface mode and configure the alarm interface controller (AIC), use the alarm-interface command in global configuration mode. To leave alarm-interface mode, use the exit command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "alarm-profile", "cmd": "router(config)#alarm profile CHASSIS chassis\nrouter(config-alarm-profile)#alarm sonet/sdh\nrouter(config-alarm-properties)#SLOF syslog\nrouter(config-alarm-properties)#SLOF severity critical\nrouter(config)#alarm profile CARD card\nrouter(config-alarm-profile)#alarm ds3\nrouter(config-alarm-properties)#DS3_RX_LOS syslog\nrouter(config-alarm-properties)#DS3_RX_LOS severity major\nrouter(config)#alarm profile PORT port\nrouter(config-alarm-profile)#alarm ds1", "desc": "To create an alarm profile for chassis, card or interface module, and port, use the alarm-profile command in configuration mode. To delete the alarm profile, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "alarm-profile attach", "cmd": "router>enable\nrouter#configure terminal\nrouter(config)#alarm-profile CHASSIS attach chassis\nrouter(config)#end\nrouter>enable\nrouter#configure terminal\nrouter(config)#alarm-profile telcordia attach chassis\nrouter(config)#end\nrouter>enable\nrouter#configure terminal", "desc": "To attach an alarm profile to chassis or card, use the alarm-profile name attach command in configuration mode. To detach the alarm profile from chassis or card, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "alarm report all", "cmd": "alarm report all", "desc": "To permit selected SONET alarms to be logged to the console for a SONET controller, use the alarm report all command in SONET configuration mode. To disable logging of select SONET alarms, use the no " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "als", "cmd": "Router> enable\nRouter# configure terminal\nRouter(config)# interface tengigabitethernet 2/1\nRouter(config-if)# als", "desc": "To enable the Automatic Laser Shutdown (ALS) mode, use the alscommand in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "analysis-module monitoring", "cmd": "Router(config)# interface serial 0/0\nRouter(config-if)# analysis-module monitoring\nRouter(config)# interface serial 0/0\nRouter(config-if)# analysis-module monitoring ucse0/0/0", "desc": "To enable Network Analysis Module (NAM) packet monitoring on an interface, use the analysis-modulemonitoring command in interface configuration mode. To disable NAM packet monitoring, use the no form " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "announce interval", "cmd": "Router# configure terminal\nRouter(config)# ptp clock ordinary domain 0\nRouter(config-ptp-clk)# clock-port slave slaveport\nRouter(config-ptp-port)# announce interval 3\nRouter(config-ptp-port)# end", "desc": "To set an interval value for timing announcement packets, use the announceinterval command in Precision" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "announce timeout", "cmd": "Device> enable\nDevice# configure terminal\nDevice(config)# ptp clock ordinary domain 0\nDevice(config-ptp-clk)# clock-port slave slaveport\nDevice(config-ptp-port)# announce timeout 7\nDevice(config-ptp-port)# end", "desc": "To set a timeout value for timing announcement packets, use the announcetimeout command in Precision" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "anti-jam", "cmd": "Router# configure terminal\nRouter(config)# gnss slot r0\nRouter(config-gnss)# anti-jam disable", "desc": "To configure the anti-jam mode for the GNSS module on the Cisco ASR 903, Cisco ASR 907, and the Cisco" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "apply (satellite initial configuration)", "cmd": "Router(sat-init-config)# apply\nRouter(sat-init-config)#\nRouter(sat-init-config)# apply\nRouter(sat-init-config)#", "desc": "To save new or changed satellite initial configuration parameters and to reset the Cisco IP VSAT satellite" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "aps authenticate", "cmd": "Router# configure terminal\nRouter(config)# interface pos 4/0/0\nRouter(config-if)# aps working 1\nRouter(config-if)# aps authenticate sanjose\nRouter(config-if)# end", "desc": "To enable authentication and specify the string that must be present to accept any packet on the out-of-band (OOB) communications channel on a Packet-over-SONET (POS) interface, use the apsauthenticat" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "aps adm", "cmd": "aps adm", "desc": "Interfaces — aps adm" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "aps clear sonet", "cmd": "Router# aps clear sonet 1/0", "desc": "To remove all externally initiated SONET automatic protection switching (APS) commands configured on a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "aps force", "cmd": "Router# configure terminal\nRouter(config)# interface pos 3/0/0\nRouter(config-if)# aps protect 10/30/1/1\nRouter(config-if)# aps force 1\nRouter(config-if)# end", "desc": "To manually switch the specified circuit to a protect interface, unless a request of equal or higher priority is in effect, use the apsforcecommand in interface configuration mode. To cancel the switc" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "aps force sonet", "cmd": "Router# configure terminal\nRouter(config)# controller sonet 1/0\nRouter(config-controller)# aps protect\nRouter(config-controller)# end\nRouter# aps force sonet 1/0 from working", "desc": "To force a specified port to switch to the alternate port within a redundant pair unless a request of equal or higher priority is in effect, use the apsforcesonetcommand in privileged EXEC mode. aps f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "aps group", "cmd": "Router# configure terminal\nRouter(config)# interface ethernet 0/0\nRouter(config-if)# ip address 10.7.7.6 255.255.255.0\nRouter(config-if)# exit\nRouter(config)# interface pos 3/0/0\nRouter(config-if)# aps group 10\nRouter(config-if)# aps working 1\nRouter(config-if)# exit\nRouter(config)# interface pos 2/0/1\nRouter(config-if)# aps group 20", "desc": "To allow more than one protect and working interface and Access Circuit Redundancy (ACR) group to be supported on a router, use the aps group command in interface configuration or controller configura" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "aps hspw-icrm-grp", "cmd": "aps hspw-icrm-grp\naps hspw-icrm-grp group-number\nno aps hspw-icrm-grp group-number", "desc": "To associate an Automatic Protection Switching (APS) group to an Interchassis Redundancy Manager (ICRM) group number, use the aps hspw-icrm-grp command in controller configuration mode. To remove the " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "aps protect", "cmd": "Router# configure terminal\nRouter(config)# interface pos 5/0/0\nRouter(config-if)# aps protect 1 10.7.7.7\nRouter(config-if)# end", "desc": "To enable a POS interface as a protect interface, use the apsprotectcommand in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "associate slot", "cmd": "associate slot", "desc": "To logically associate slots for automatic protection switching (APS) processor redundancy, use the associate slot command in redundancy configuration mode. To disable slot associations, use the no fo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "association", "cmd": "Router(config-ipczone)# association 1", "desc": "To configure an association between current node and a remote node, use the association command in interprocess communication (IPC) zone configuration mode. To disable this functionality, use the no f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "attach profile-name", "cmd": "Router(config)# controller sonet 0/3/3\nRouter(config-controller)#attach profile PORT\nRouter(config-controller)#end", "desc": "To attach alarm profile to port, enter into controller configuration mode, and use the attach profile-name command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "atm sonet", "cmd": "Router(config)#\nRouter(config-if)#\nRouter(config-if)#", "desc": "To set the mode of operation and thus control the type of the ATM cell used for cell-rate decoupling on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "au-3", "cmd": "Router(config)# controller sonet 2/0/0\nRouter(config-controller)# aug mapping au-3\nRouter(config-ctrlr-au3)# au-3 3", "desc": "To configure a particular Administrative Unit type 3 (AU-3) of an E1 line that has been mapped to an AU-3, use the au-3command in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "aug mapping", "cmd": "Router(config)# controller sonet 1/0\nRouter(config-controller)# aug mapping au-3", "desc": "To configure administrative unit group (AUG) mapping when Synchronous Digital Hierarchy (SDH) framing is selected, use the augmapping command in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "aug mapping au-3 stm [stm number] path number [path number]", "cmd": "aug mapping au-3 stm [stm number] path number [path number]\nau-3 Mode of augment mapping\nau-4 Mode of augment mapping", "desc": "Interfaces — aug mapping au-3 stm [stm number] path number [path number]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "auto-polarity", "cmd": "Router(config)#\nRouter(config-hub)#", "desc": "To enable automatic receiver polarity reversal on a hub port connected to an Ethernet interface of a Cisco 2505 or Cisco 2507 router, use the auto-polarity command in hub configuration mode. To disabl" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "b2 sd-ber", "cmd": "Router(config)# controller sonet 1/0\nRouter(config-controller)# b2 sd-ber 7", "desc": "To set the signal degrade bit-error rate (BER) threshold values, use the b2sd-bercommand in controller configuration mode. To return to the default setting, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "b2 sf-ber", "cmd": "Router(config)# controller sonet 1/0\nRouter(config-controller)# b2 sf-ber 7", "desc": "To set the signal failure bit-error rate (BER) threshold values, use the b2sf-bercommand in controller configuration mode. To return to the default setting, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "backup delay", "cmd": "backup delay\nno backup delay {enable-delay-period | never} {disable-delay-period | never}", "desc": "To define how much time should elapse before a secondary line status changes after a primary line status has changed, use the backupdelaycommand in interface configuration mode. To return to the defau" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "backup interface", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# backup interface serial 1\nRouter(config)# interface gigabitEthernet 3/0/1\nRouter(config-if)# backup interface gigabitEthernet 4/0/1", "desc": "To configure an interface as a secondary or a dial backup, use the backupinterfacecommand in interface configuration mode. To disable the interface from serving as a backup, use the no form of this co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "backup interface atm", "cmd": "Router(config)# connect ATM atm2/0/0 0 atm3/0/0 0\nRouter(config-connection)# backup interface atm 4/0/0 1\nRouter(config)# connect ATM atm2/0/0 24/56 atm3/0/0 24/57\nRouter(config-connection)# backup interface atm 4/0/0 25/58", "desc": "To back up a locally switched ATM connection, use the backupinterfaceatmcommand in theconnectsubmode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "backup interface cem", "cmd": "Router(config)# connect cema cem4/3/0 0 cem2/0/0 0\nRouter(config-connection)# backup interface cem 2/0/0 1", "desc": "To back up a locally switched CEM connection, use the backupinterfacecem command in theconnectsubmode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "backup load", "cmd": "backup load\nno backup load {enable-threshold | never} {disable-load | never}", "desc": "To set a traffic load threshold for dial backup service, use the backuploadcommand in interface configuration mode. To return to the default value, use the no form of this command. backup load {enable" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "bandwidth (interface configuration)", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# bandwidth 44736\nRouter(config)# interface serial 0\nRouter(config-if)# bandwidth receive 1000", "desc": "To set the inherited and received bandwidth values for an interface, use the bandwidth command in interface or virtual network interface config mode. To restore the default values, use the no form of " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "batch", "cmd": "batch", "desc": "To allow better cache utilization at the interface level, use the batch command under interface configuration batch {allowed | countnumber | thresholdrange }" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "bert abort controller", "cmd": "Router# bert abort controller t1 0/0\nRouter#\nRouter# bert abort controller t1 0/0", "desc": "To end a bit error rate testing (BERT) session, use the bertabortcontrollercommand in privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "bert controller", "cmd": "Router#\nRouter# bert controller t1 0/0 channel-group 0 pattern qrss interval 5", "desc": "To start a bit error rate test (BERT) for a particular port, use the bertcontrollercommand in privileged EXEC bert controller controller-type controller-number last-controller-number profile {profile-" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "bert errors", "cmd": "Router# configure terminal\nRouter(config)# interface serial 5/0/0\nRouter(config-if)# bert errors 200", "desc": "To transmit bit error ratio test (BERT) errors while running any BERT pattern, use theberterrorcommand in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "bert pattern", "cmd": "Router# configure terminal\nRouter(config)# int serial 5/0/0\nRouter(config-if)# bert pattern 0s\nRouter#enable\nRouter#configure terminal\nRouter(config)#bert pattern pRBS interval 5 direction line", "desc": "To start a BERT pattern on a port, use the bertpatterncommand in interface configuration mode. Use the no bert pattern command to stop the sequence. bert pattern {0s | 1s | 2^11 | 2^15 | 2^20 | 2^23 |" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "bert pattern (T1 E1)", "cmd": "Router(config)#\nRouter(config-if)#", "desc": "To enable a bit error rate test (BERT) pattern on a T1 or E1 line, use thebertpatterncommand in controller configuration mode. To disable a BER test pattern, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "bert profile", "cmd": "Router(config)#", "desc": "To set up various bit error rate testing profiles, use the bert profile command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "bitswap line", "cmd": "Router(config-controller)# bitswap line 0\nRouter(config-controller)# no bitswap", "desc": "To divert the data of a disturbed transmission channel to other channels, use the bitswap line command in controller configuration mode. To disable bitswapping, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "bridge-domain", "cmd": "Router# configure terminal\nRouter(config)# interface ATM6/2\nRouter(config-if)# pvc 2/101\nRouter(config-if-atm-vc)# bridge-domain 99 dot1q\nRouter(config-if-atm-vc)# end\nRouter(config-if-atm-vc)# bridge-domain\nRouter(config-if-atm-vc)# bridge-domain\nRouter(config-if-atm-vc)# bridge-domain\nRouter(config)# interface atm 8/0.100\nRouter(config-if)# range pvc 102/100 102/199", "desc": "To enable RFC 1483 ATM bridging or RFC 1490 Frame Relay bridging to map a bridged VLAN to an ATM permanent virtual circuit (PVC) or Frame Relay data-link connection identifier (DLCI), use the bridge-d" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "bridge-domain (subinterface)", "cmd": "Router(config)# interface GigabitEthernet 1/0/1.1\nRouter(config-subif)# encapsulation dot1q 10\nRouter(config-subif)# bridge-domain 100 dot1q\nRouter(config)# interface GigabitEthernet 2/0/2.2\nRouter(config-subif)# encapsulation dot1q 20\nRouter(config-subif)# bridge-domain 200 dot1q-tunnel\nRouter(config)# vlan 100\nRouter(config-vlan)# exit\nRouter(config)# interface GigabitEthernet 1/0/1.1\nRouter(config-subif)# encapsulation dot1q 10", "desc": "To enable bridging across Gigabit Ethernet subinterfaces, use the bridge-domaincommand in subinterface configuration mode. To disable bridging, use the no form of this command. bridge-domain vlan-id {" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "cable bundle", "cmd": "Router(config-if)# cable bundle 25 master\nRouter(config-if)#\nRouter(config-if)# cable bundle 5", "desc": "To configure a cable interface to belong to an interface bundle, use the cablebundlecommand in interfaceconfiguration mode. To delete a cable interface bundle definition, use the no form of this comma" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "cable helper-address", "cmd": "Router(config-if)#\nRouter(config-if)# cable helper-address 172.23.66.44 host", "desc": "To specify a destination address for User Datagram Protocol (UDP) broadcast Dynamic Host Configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "cablelength", "cmd": "Router(config)#\nRouter(config-controller)#\nRouter(config)# controller dsx3 4/0/6\nRouter(config-controller)# cablelength 120", "desc": "To specify the distance of the cable from the routers to the network equipment, use the cablelength command in controller configuration mode. To restore the default cable length, use the no form of th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "cablelength (E1 controller)", "cmd": "Router(config-controller)# cablelength long squelch-on", "desc": "To fine-tune the pulse of a signal at the receiver for an E1 cable on a Cisco AS5300 or Cisco AS5400, use the cablelength command in controller configuration mode. To restore the default receiver sens" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "cablelength short", "cmd": "Router# configure terminal\nRouter(config)# controller t1 1/1/0\nRouter(config-controller)# cablelength short 266\nRouter(config-controller)# end\nRouter(config)#\nRouter(config-if)#", "desc": "To set a cable length of 655 feet or shorter for a DS1 link on the Cisco MC3810, Cisco 2600, Cisco NCS 4200 series, and Cisco 3600 series routers, use the cablelengthshort command in controller config" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "card", "cmd": "Router# config t\nRouter(config)# card 8/0 ?\nRouter(config)# card 8/0\nRouter(config)# int c8/0/0\nRouter(config-if)#\nRouter# configure terminal\nRouter(config)# card 1 2jacket-1\nRouter# configure terminal\nRouter(config)# card 1/0 24rfchannel-spa-1\nRouter# configure terminal", "desc": "To preprovision a router slot for an interface card, use the cardcommand in global configuration mode. To remove the preprovisioning for a card, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "card type (T1-E1)", "cmd": "Router(config)# card type t1 1\nRouter(config)# card type t1 5 2", "desc": "To configure a T1 or E1 card type, use the cardtype command in global configuration mode. To deselect the card type on non-SPA platforms, use the no form of this command. The no form of this command i" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "card type (T3-E3)", "cmd": "Router(config)# card type t3 1\nRouter(config)# card type t3 5 2", "desc": "To configure a T3 or E3 card type, use the cardtype command in global configuration mode. To deselect the card type, use the no form of this comand. The no form of this command is not supported on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "card-protection", "cmd": "card-protection\ncard-protection CPGN\ncard-protection {primary | backup}\ncard-protection revertive time", "desc": "to remove the configuration." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "carrier-delay", "cmd": "Router(config)# interface serial2/3/0\nRouter(config-if)# carrier-delay 5\nDevice# configure terminal\nDevice(config)# template user-template1\nDevice(config-template)# carrier-delay 5\nDevice(config-template)# end\nRouter(config)# interface GigabitEthernet2/0/0\nRouter(config-if)# carrier-delay up 8\nRouter(config-if)# carrier-delay down msec 50\nRouter# show interfaces GigabitEthernet 0/1/0", "desc": "To modify the default carrier delay time on a main physical interface, use the carrier-delay command in interface configuration or template configuration mode. To return to the default carrier delay t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "cem", "cmd": "Router(config)# cem 1/2/0\nRouter(config-cem)#", "desc": "To enter circuit emulation (CEM) configuration mode, use the cem command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "cem-group", "cmd": "Router(config-controller)# cem-group 0\nRouter(config-controller)# cem-group 6 timeslots 1-4,9,10", "desc": "To create a circuit emulation (CEM) channel from one or more time slots of a T1 or E1 line of an" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "channel-group", "cmd": "Router(config)# controller e1 1/0\nRouter(config-controller)# clock source internal\nRouter(config-controller)# channel-group 0 timeslots 1-31 aim 0\nRouter# configure terminal\nRouter(config)# controller t1 6/0\nRouter(config-controller)# channel-group 2 timeslots 3 aim 0\nRouter(config-controller)# exit\nRouter(config)# interface serial 6/0:2\nRouter(config-if)# encapsulation ppp\nRouter(config-if)# ip address 10.0.0.1 255.0.0.0", "desc": "To configure serial WAN on a T1 or E1 interface, use the channel-group command in controller configuration mode. To clear a channel group, use the no form of this command. channel-group channel-group-" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "channel-group (interface)", "cmd": "Router(config-if)#\nRouter(config-if)#\nRouter(config)#\nRouter(config-if)#\nRouter(config)#\nRouter(config-if)#", "desc": "To assign and configure an EtherChannel interface to an EtherChannel group, use the channel-group command in interface configuration mode. To remove the channel-group configuration from the interface," }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "channel-protocol (interface)", "cmd": "channel-protocol (interface)\nno form of this command to deselect the protocol.\nchannel-protocol {lacp | pagp}\nno channel-protocol", "desc": "To enable Port Aggretation Control Protocol (PAgP) or Link Aggregation Control Protocol (LACP) on an interface to manage channeling, use thechannel-protocol command in interface configuration mode. Us" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "channelized", "cmd": "Router# configure terminal\nRouter(config)# controller T3 1/1/0\nRouter(config-controller)# no channelized\nRouter# configure terminal\nRouter(config)# controller T3 2/0/0\nRouter(config-controller)# no channelized\nRouter(config-controller)# exit\nRouter(config)#\nRouter# configure terminal\nRouter(config)# controller T3 0/4/40", "desc": "To configure the T3/E3 controller for channelized mode, use the channelized command in controller configuration mode. To configure the T3/E3 controller for unchannelized mode, use theno form of this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "class cem", "cmd": "class cem\nclass cem class name", "desc": "To configure CEM interface parameters in a class that is applied to CEM interfaces together, use the class cem command in global configuration mode. This command works in the same manner for CEM inter" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear aim", "cmd": "Router# clear aim 0\nRouter#", "desc": "To clear the data compression Advanced Interface Module (AIM) daughter card registers and reset the hardware, use the clearaim command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear cable-diagnostics tdr", "cmd": "Router# clear cable-diagnostics tdr interface gigabitethernet 4/1\nRouter#", "desc": "To clear a specific interface or clear all interfaces that support Time Domain Reflectometry (TDR), use the clearcable-diagnosticstdrcommand in privileged EXEC mode. clear cable-diagnostics tdr [inter" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear catalyst6000 traffic-meter", "cmd": "Router# clear catalyst6000 traffic-meter\nRouter#", "desc": "To clear the traffic meter counters, use the clear catalyst6000 traffic-metercommand in privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear cem", "cmd": "Router# clear cem 1/1/10", "desc": "To clear circuit emulation (CEM) statistics, use the clearcem command in privileged EXEC mode. clear cem {slot | slot/port/channel | all}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear controller", "cmd": "Router# clear controller t1 4/0\nRouter# clear controller e1 0", "desc": "To reset the T1 or E1 controller, use the clearcontrollercommand in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear controller lex", "cmd": "Router#\nRouter#", "desc": "To reboot the LAN Extender chassis and restart its operating software, use the clearcontrollerlex command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear controller wanphy", "cmd": "Router# show controllers wanphy 0/1/0\nRouter# clear controller wanphy 0/1/0\nRouter# show controllers wanphy 0/1/0", "desc": "Interfaces — clear controller wanphy" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear controller vdsl", "cmd": "Router#clear controller vdsl 0/2/0", "desc": "To reset the VDSL line related counters, use the clearcontrollervdsl command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear counters", "cmd": "Router#\nRouter#\nRouter# clear counter port-channel 1", "desc": "To clear the interface counters, use the clearcounters command in user EXEC or privileged EXEC mode. clear counters commandclear counters [interface-type interface-number]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear debug platform condition all", "cmd": "Router# clear debug platform condition all", "desc": "To remove the debug conditions applied to a platform, use the clear debug platform condition all command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear diagnostic event-log", "cmd": "Router# clear diagnostic event-log event-type error\nRouter# clear diagnostic event-log module 3\nRouter# clear diagnostic event-log module all", "desc": "To clear the diagnostic event logs for a specific module or event type, use the cleardiagnosticevent-logcommand in Priveleged exec mode. clear diagnostic event-log {event-type {error | info | warning}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear dsip tracing", "cmd": "Router# clear dsip tracing", "desc": "To clear Distributed System Interconnect Protocol (DSIP) tracing statistics (trace logging), use the cleardsiptracing command in privileged EXEC mode. clear dsip tracing {counters | tracing} [control " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear facility-alarm", "cmd": "Router# clear facility-alarm\nRouter# clear facility-alarm critical\nRouter# clear facility-alarm minor\nRouter# clear facility-alarm source pem 0\nRouter# clear facility-alarm source pem 1", "desc": "To clear alarm conditions and reset the alarm contacts, use the clearfacility-alarmcommand in privileged clear facility-alarm [critical | major | minor | source pem {0 | 1}]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear interface", "cmd": "Router#\nRouter#\nRouter#\nRouter# clear interface port-channel 1\nRouter# clear interface loopback 1\nRouter#\nRouter# show rlm group 1 status\nRouter#", "desc": "To reset the hardware logic on an interface, use the clearinterface command in user EXEC or privileged clear interface commandclear interface {type number [name-tag] | range type number}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear interface cem", "cmd": "Router# clear interface cem", "desc": "Interfaces — clear interface cem" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear interface serial", "cmd": "Router# clear interface serial 1/4/0:2:23", "desc": "To reset the statistical information specific to a serial interface, use the clearinterfaceserialcommand in user" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear ipc statistics", "cmd": "Router# show ipc status\nRouter# clear ipc statistics\nRouter# show ipc status", "desc": "To clear all interprocess communication (IPC) statistics, use the clearipcstatistics command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear lacp counters", "cmd": "Router# clear lacp 1 counters\nRouter#", "desc": "To clear the statistics for all interfaces belonging to a specific channel group, use the clearlacpcounters command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear platform software vnic-if-nvtable", "cmd": "clear platform software vnic-if-nvtable\nclear platform software vnic-if-nvtable", "desc": "To clear the virtual router’s persistent interface database on the original VM and update the interface mapping to the hypervisor, use the clear platform software vnic-if-nvtable command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear rbscp", "cmd": "Router# show rbscp statistics tunnel 0\nRouter# clear rbscp tunnel 0\nRouter# show rbscp statistics tunnel 0", "desc": "To reset and restart a Rate Based Satellite Control Protocol (RBSCP) tunnel, use the clearrbscp command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear service-module serial", "cmd": "Router# clear service-module serial 0", "desc": "To reset an integrated CSU/DSU, use the clearservice-moduleserialcommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear top counters interface report", "cmd": "Router# clear top counters interface report 1000\nRouter#\nRouter# clear top counters interface report 4\nRouter#", "desc": "To clear the TopN reports, use the cleartopcountersinterfacereport command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock", "cmd": "Router(config-if)# clock active\nRouter(config-if)#", "desc": "To configure the port clocking mode for the 1000BASE-T transceivers, use the clock command in interface configuration mode. To return to the default settings,use the no form of this command. clock {au" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock mode", "cmd": "Router(config-cem)# clock mode normal", "desc": "To configure the clock mode of a serial circuit emulation (CEM) channel, use the clockmode command in" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock rate", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# clock rate 64000\nRouter(config)# interface serial 5/0\nRouter(config-if)# clock rate 1234567\nRouter# show running-config", "desc": "To configure the clock rate for the hardware connections on serial interfaces such as network interface modules (NIMs) and interface processors to an acceptable bit rate, use the clockrate command in " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock rate (interface ATM)", "cmd": "clock rate (interface ATM)\nclock rate [aal2 | aal5] clock-rate-value\nno clock rate [aal2 | aal5] clock-rate-value", "desc": "To configure the clock rate between a WAN interface card (WIC) and the serial communication controllers (SCCs) that are used by the WIC, use the clockrate command in interface ATM configuration mode. " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock rate (interface serial)", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# clock rate line\nRouter(config)# interface serial 5/0\nRouter(config-if)# clock rate 1234567\nRouter# show running-config", "desc": "To configure the clock rate for the hardware connections on serial interfaces, such as network interface modules (NIMs) and interface processors, to an acceptable bit rate, use the clockrate command i" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": ".", "cmd": "Router# show cem 4/1/0", "desc": "Interfaces — ." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock rate network-clock", "cmd": "Router(config)# interface serial 1\nRouter(config-if)# clock rate network-clock 2048", "desc": "To configure the network clock rate (speed) for serial ports 0 or 1 in DCE mode, use the clockratenetwork-clock command in interface configuration mode. To cancel the network clock rate value, use the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock recovered adaptive/differential cem", "cmd": "clock recovered adaptive/differential cem\ncommand in recovered clock mode", "desc": "To associate the clock recovered ID to the CEM group use the clock recovered adaptive or differential cem" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source", "cmd": "Router(config)# interface atm 0/2\nRouter(config-if)# clock source internal", "desc": "To configure the clock source of a DS1 link, enter the clocksource command in interface configuration, controller configuration, or ATM interface configuration mode. To restore the default line settin" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source(10GE)", "cmd": "Router(config)# interface TenGigabitEthernet 1/1\nRouter(config-if)# clock source line\nRouter(config)# interface TenGigabitEthernet 1/1\nRouter(config-if)# clocksourceinternal", "desc": "To specify the clock source of a 10 Gigabit Ethernet (GE) line card, use the clocksource command in interface configuration mode. To restore the clock source to its default setting, use the no form of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source (AS5200)", "cmd": "Router(config)# controller t1 0\nRouter(config-controller)# clock source line primary\nRouter(config)# controller t1 1\nRouter(config-controller)# clock source line secondary", "desc": "To select the clock source for the time-division multiplexing (TDM) bus in a Cisco AS5200 access server, use the clocksource command in interface configuration mode. To restore the clock source to its" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source (CEM)", "cmd": "Router(config-cem)# clock source loop\nRouter(config-controller)# clock source adaptive 6\nRouter(config-controller)# clock source adaptive 5 closed-loop\nRouter(config-controller)# clock source recovered 1", "desc": "To configure the clock source of a circuit emulation (CEM) network module port, use the clocksource command in CEM configuration mode or controller configuration mode. To return to the default clock s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source (controller)", "cmd": "Device(config)# controller t1 0/1/0\nDevice(config-controller)# clock source network\nDevice(config)# controller dsx3 4/0/6\nDevice(config-controller)# clock source line", "desc": "To set the T1 line clock source, use the clock source command in controller configuration mode. To restore the clock source to its default setting, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source (CT3IP)", "cmd": "Router(config)# controller t3 9/0/0\nRouter(config-controller)# clock source line", "desc": "To specify where the clock source is obtained for use by the Channelized T3 Interface Processor (CT3IP) in" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source (interface)", "cmd": "Router(config)# interface serial 0/1\nRouter(config-if)# clock source internal\nRouter(config-if)# clock source internal\nRouter(config-if)# clock source internal", "desc": "To control the clock from which a G.703-E1 interface, an E1-G.703/G.704 serial port adapter, or a PA-E3 serial port adapter clocks its transmitted data, use the clocksource command in interface config" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source (J1 controller)", "cmd": "Router(config)# controller j1 3/0\nRouter(config-controller)# clock source line", "desc": "To configure the clock source for a J1 controller, use the clock source command in controller configuration mode. To restore the clock source to its default setting, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source (MC3810)", "cmd": "Router(config)# controller T1 0\nRouter(config-controller)# clock source internal\nRouter(config)# controller T1 1\nRouter(config-controller)# clock source line", "desc": "To specify the clock source of a DS1 link on the Cisco MC3810 multiservice access concentrator, use the clocksource command in controller configuration mode. To restore the clock source to its default" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source (SONET controller)", "cmd": "Router(config)# controller sonet 2/0\nRouter(config-controller)# clock source line", "desc": "To specify the clock source of a SONET controller, use the clocksource command in controller configuration mode. To restore the clock source to its default setting, use the no form of this command. cl" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source (T1 E1 controller)", "cmd": "Router(config)# controller E1 1/0\nRouter(config-controller)# framing crc\nRouter(config-controller)# linecoding hdb3\nRouter(config-controller)# clock source internal\nRouter(config-controller)# ds0-group timeslots 1-15 type e&m-wink-start\nRouter(config)# controller E1 1/1\nRouter(config-controller)# framing esf\nRouter(config-controller)# linecoding b8zs\nRouter(config-controller)# clock source internal\nRouter(config-controller)# ds0-group timeslots 1-15 type e&m-wink-start", "desc": "To set clocking for individual T1 or E1 links, use the clocksource command in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock source (T3 E3 controller)", "cmd": "Router(config)# controller t3 1/0\nRouter(config-controller)# clock source line", "desc": "To specify where the clock source is obtained for use by a T3 or E3 controller, use the clocksource command in controller configuration mode. To restore the default clock source, use the no form of th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock switchover", "cmd": "clock switchover", "desc": "To specify the input lead state change that triggers the clock switching over from line to internal or from internal to line, use the clock switchover command in Data Circuit Terminating Equipment (DC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "clock-port", "cmd": "Device> enable\nDevice# configure terminal\nDevice# ptp clock boundary domain 0\nDevice(config-ptp-clk)# clock-port slave slaveport\nDevice(config-ptp-port)# clock source 8.8.8.1\nDevice(config-ptp-port)# sync limit 1\nDevice(config-ptp-port)# announce timeout 4\nDevice(config-ptp-port)# delay-req interval 2\nDevice(config-ptp-port)# end", "desc": "To specify the clocking mode of a Precision Time Protocol clock port, enter clock port configuration mode using the clock-port command in the PTP clock configuration mode. To remove a clocking mode co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "cmt connect", "cmd": "Router# cmt connect fddi\nRouter# cmt connect fddi 0\nRouter# cmt connect fddi 1/0\nRouter# cmt connect fddi 0 phy-a", "desc": "To start the processes that perform the connection management (CMT) function and to allow the ring on one fiber to be started, use the cmtconnect command in user EXEC or privileged EXEC mode. cmt conn" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "cmt disconnect", "cmd": "Router# cmt disconnect fddi\nRouter# cmt disconnect fddi 0\nRouter# cmt disconnect fddi 1/0\nRouter# cmt disconnect fddi 0 phy-a\nRouter# cmt disconnect fddi 1/0 phy-a", "desc": "To stop the processes that perform the connection management (CMT) function and to allow the ring on one fiber to be stopped, use the cmtdisconnect command in user EXEC or privileged EXEC mode. cmt di" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "compress", "cmd": "Router(config)# interface serial 3/1/0\nRouter(config-if)# encapsulate ppp\nRouter(config-if)# compress stac\nRouter(config)# interface serial 0\nRouter(config-if)# encapsulation lapb\nRouter(config-if)# compress predictor\nRouter(config-if)# mtu 1509\nRouter(config-if)# lapb n1 12072\nRouter(config)# interface serial 0\nRouter(config-if)# encapsulation lapb", "desc": "To configure software compression for Link Access Procedure, Balanced (LAPB), PPP, and High-Level Data" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "compress mppc", "cmd": "Router(config-if)# encapsulate ppp\nRouter(config-if)# compress mppc", "desc": "To configure compression using the Microsoft Point-to-Point Compression (MPPC) algorithm on your data compression Advanced Interface Module (AIM) for the Cisco 2600 series router, use the compressmppc" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "compress stac caim", "cmd": "Router(config-if)# encapsulation ppp\nRouter(config-if)# compress stac caim 0", "desc": "To specify the hardware compression, use the compressstaccaimcommand in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "connect (module)", "cmd": "Router(config)# connect connection1 module GigabitEthernet0/0 0 module GigabitEthernet4/0\nRouter(config-module-conn)# exit\nRouter(config)# connect connection1 module gi2/0 vlan 10 module gi3/0\nRouter(config-module-conn)# connect connection2 module gi3/0 vlan 5 module gi4/0\nRouter(config-module-conn)# exit", "desc": "To create a connection between two Gigabit Ethernet (GE) enhanced network modules (ENMs) or between the GE port on an installed small-form-factor-pluggable (SFP) module and a GE ENM, or between the GE" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "constellation", "cmd": "Router# configure terminal\nRouter(config)# gnss slot r0\nRouter(config-gnss)# constellation auto", "desc": "To configure the constellation for the global navigation satellite system (GNSS) module on the Cisco ASR 903, Cisco ASR 907, and the Cisco ASR 920 routers, use the constellation command in the gnss mo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "control-lead sampling-rate", "cmd": "Router(config-cem)# control-lead sampling-rate 20", "desc": "To configure the sampling rate of input control leads, use the control-leadsampling-rate command in CEM configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "control-lead state", "cmd": "Router(config-cem)# control-lead state active cts on", "desc": "To specify the state of an output control lead, use the control-leadstate command in CEM configuration mode. The choice of output lead depends on whether the port is DCE or DTE. control-lead state {ac" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "controller", "cmd": "Router(config)# controller t1 4/0\nRouter(config-controller)#\nRouter(config)# controller t1 1/0/0:1\nRouter(config-controller)#\nRouter(config)# controller j1 3/0\nRouter(config-controller)#", "desc": "To configure a T1, E1, J1, or BITS controller and enter controller configuration mode, use the controller command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers j1 Displays information about the J1 link.", "cmd": "show controllers j1 Displays information about the J1 link.\nclock rate through cut-through\ncontroller dsl", "desc": "Interfaces — show controllers j1 Displays information about the J1 link." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "controller dsl", "cmd": "Router(config)# controller dsl\nRouter(config-controller)#", "desc": "To configure the digital subscriber line (DSL) controller and enter controller configuration mode, use the controllerdsl command in global configuration mode. This command does not have a no form." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "controller dwdm", "cmd": "Router(config)# controller dwdm 3/1", "desc": "To configure a Dense Wavelength-Division Multiplexing (DWDM) controller, use the controllerdwdmcommand in global configuration mode. This command does not have a no form." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "controller e3", "cmd": "Router(config)# controller e3 0/0\nRouter(config-controller)#", "desc": "To configure an E3 controller and enter controller configuration mode, use the controllere3command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "controller mediatype", "cmd": "controller mediatype\nbay Bay of the interface\nport Mediatype port number", "desc": "Interfaces — controller mediatype" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "controller protection-group", "cmd": "controller protection-group\ncontroller protection-group group id\ngroup id Identifier of the interface", "desc": "Interfaces — controller protection-group" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "controller sdh", "cmd": "controller sdh\ncontroller sdh slot /bay /port", "desc": "Interfaces — controller sdh" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "controller sonet", "cmd": "Router(config)# controller sonet 2/0\nRouter(config-controller)#\nRouter(config)# controller SONET 0/0/8\nRouter(config-controller)#", "desc": "To configure a SONET controller and enter controller configuration mode, use the controllersonet command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "controller sonet-acr", "cmd": "Router(config)# Controller sonet 4/1/0\nRouter(config-controller)# aps group acr 1\nRouter(config-controller)# aps working 1\nRouter(config)#", "desc": "To configure a SONET Access Circuit Redundancy (ACR) virtual controller, and to enter the controller configuration mode, use the controller sonet-acr command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "controller t1/e1", "cmd": "Router(config)# controller t1 0/1/1\nRouter(config-controller)#\nRouter(config)# controller e1 0/1/1\nRouter(config-controller)#", "desc": "To configure a T1or E1 controller and enter controller configuration mode, use the controller command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "controller t3", "cmd": "Router(config)# controller t3 3/0/0\nRouter(config)# controller t3 3/0/0\nRouter(config)# controller t3 0/4/40", "desc": "To configure the Channelized T3 Interface Processor (CT3IP) in Cisco 7500 series routers or the CT3 feature board in Cisco AS5800 access servers, use the controllert3 command in global configuration m" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "copy flash lex", "cmd": "Router# copy flash lex 0", "desc": "To download an executable image from Flash memory on the core router to a LAN Extender, use the copyflashlex command in privileged EXEC mode. copy flash lex number copy flash lex command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "copy tftp lex", "cmd": "Router# copy tftp lex 0", "desc": "To download an executable image from a TFTP server to the LAN Extender, use the copytftplex command privileged EXEC mode. copy tftp lex number copy tftp lex command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "crc", "cmd": "Router(config)# interface serial 3/0\nRouter(config-if)# crc 32", "desc": "To set the length of the cyclic redundancy check (CRC), use thecrc command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "crc bits 5", "cmd": "Router(config)# interface serial 0/0\nRouter(config-if)# crc 32\nRouter(config-if)# crc bits 5", "desc": "To enable generation of CRC5 (per ITU Recommendation G.704 and G.703) to improve data integrity, use the crcbits5command in interface configuration mode. To disable this function, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "crc-threshold", "cmd": "Router(config-controller)# crc-threshold 512", "desc": "To define a severely errored second (SES) by specifying the number of cyclic redundancy check (CRC) errors that occur in one second, use the crc-threshold command in controller configuration mode. To " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ctunnel mode", "cmd": "ctunnel mode\nctunnel mode [gre | cisco]\nno ctunnel mode", "desc": "To transport IPv4 and IPv6 packets over Connectionless Network Service (CLNS) tunnel (CTunnel), use the ctunnelmode command in interface configuration mode. To return the ctunnel to the default cisco " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "cut-through", "cmd": "Router(config)#\nRouter(config-if)#\nRouter(config-if)#\nRouter(config-if)#\nRouter(config-if)# exit", "desc": "To configure the interfaces on the PA-12E/2FE port adapter to use cut-through switching technology between interfaces within the same bridge group, use the cut-throughcommand in interface configuratio" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "data-protection", "cmd": "Router(config-cem)# data-protection", "desc": "To enable data protection for a circuit emulation (CEM) channel, use the data-protectioncommand in CEM configuration mode. To disable data protection, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "data-strobe", "cmd": "Router(config-cem)# data-strobe dtr on", "desc": "To specify an input control lead to be monitored as an indicator of valid data, use the data-strobe command in CEM configuration mode. To disable the monitoring of an input control lead, use the no fo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "dce-terminal-timing enable", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# dce-terminal-timing enable", "desc": "To prevent phase shifting of the data with respect to the clock when running the line at high speeds and long distances, use the dce-terminal-timingenable command in interface configuration mode. If s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug l2protocol-tunnel", "cmd": "Router# debug l2protocol-tunnel error", "desc": "To configure the debugging option of Layer 2 Protocol Tunneling (L2PT), use the debugl2protocol-tunnel command in EXEC mode. debug l2protocol-tunnel [error | event | misc | packet]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug platform link-dc", "cmd": "Router# remote command module 1 debug platform link-dc tranceiver\nRouter# remote command module 1 debug platform link-dc interrupt\nRouter# remote command module 1 show debug\nRouter# remote command module 1 show platform hardware transceiver status 1", "desc": "To display debugging messages for the link daughter card, use the debugplatformlink-dccommand in privileged EXEC mode. To disable debugging output, use the no form of this command. debug platform link" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug platform network-clock", "cmd": "Router(config)# debug platform network-clock", "desc": "To debug issues related to the network clock, such as alarms, out-of-resource (OOR), and active-standby sources not selected correctly, use the debug platform network-clock command in the privileged E" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug platform software ucse", "cmd": "Router# debug platform software ucse all\nRouter#\nRouter# ucse subslot 2/0 imc password-reset\nRouter#", "desc": "To debug the Cisco UCS E-Series Server platform software and display debug messages, use the debug platform software ucse command in privileged EXEC mode. To disable debug, use the no form of this deb" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "debug snmp tunnel-mib", "cmd": "Router# debug snmp tunnel-mib", "desc": "To enable the debugging for configuring the IP Tunnel Management Information Base (MIB) through Simple" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "default (CEM)", "cmd": "Router(config-cem)# default data-protection", "desc": "To reset channel options to their default values, use the defaultcommand in CEM configuration mode. default {data-protection | dejitter-buffer | idle-pattern | ip dscp | ip tos | ip precedence |" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "default interface", "cmd": "Router(config)# default serial 0", "desc": "To reset the configuration of an interface back to its default values, use the defaultcommand in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "define interface-range", "cmd": "Device(config)# define interface-range macro1 ethernet 1/2 - 5, fastethernet 5/5 - 10\nDevice(config)# define interface-range loopback1-10", "desc": "To create an interface-range macro, use the define interface-range command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "dejitter-buffer", "cmd": "Router(config-cem)# dejitter-buffer 200\nRouter# configure terminal\nRouter(config)# interface cem 0/0\nRouter(config-if)# no ip address\nRouter(config-if)# cem 0\nRouter(config-if-cem)# dejitter-buffer 10\nRouter(config-if-cem)# xconnect 10.10.10.10 200 encapsulation mpls\nRouter(config-if-cem-xconn)# exit\nRouter(config-if-cem)# exit\nRouter(config-if)# exit", "desc": "To configure the size of the dejitter buffer, use the dejitter-buffer command in CEM configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "clear cem Clears CEM channel statistics.", "cmd": "clear cem Clears CEM channel statistics.\ndejitter-buffer\ndelay-asymmetry", "desc": "Interfaces — clear cem Clears CEM channel statistics." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "delay-asymmetry", "cmd": "Router# configure terminal\nRouter(config)#ptp clock\nRouter(config-ptp-clk)#clock-port sla slave\nRouter(config-ptp-port)#clock source 1.1.1.1 delay-asymmetry 300 nanoseconds\nRouter# configure terminal\nRouter(config)#ptp clock\nRouter(config-ptp-clk)#clock-port sla slave\nRouter(config-ptp-port)#delay-asymmetry 500", "desc": "To perform the PTP asymmetry readjustment on a PTP node to compensate for the delay in the network, use the delay-asymmetry command in the PTP clock configuration mode. To revert to default setting, u" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "delay (interface)", "cmd": "Router(config)# interface serial 3\nRouter(config-if)# delay 3000", "desc": "To set a delay value for an interface, use the delay command in interface configuration mode. To restore the default delay value, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "description (controller)", "cmd": "Router(config)# controller t1\nRouter(config-controller)# description 3174 Controller for test lab", "desc": "To add a description to an E1 or T1 controller or the Channelized T3 Interface Processor (CT3IP) in Cisco 7500 series routers, use the descriptioncommand in controller configuration mode. To remove th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "description (interface configuration)", "cmd": "description (interface configuration)\ndescription string\nno description", "desc": "To add a description to an interface configuration, use the description command in interface configuration mode. To remove the description, use the noform of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "diagnostic level", "cmd": "diagnostic level\ndiagnostic level {power-on | bypass}", "desc": "To turn on power-on diagnostic tests for the network service engines (NSEs) installed in a Cisco 7300 series router, use the diagnostic level command in privileged EXEC configuration mode. There is no" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "dial-tdm-clock", "cmd": "Router(config)# dial-tdm-clock priority 1 external t1\nRouter(config)# dial-tdm-clock priority 5 trunk-slot 4 port 1\nRouter(config)# exit", "desc": "To configure the clock source and priority of the clock source used by the time-division multiplexing (TDM) bus on the dial shelf of the Cisco AS5800, use the dial-tdm-clock command in global configur" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "dot1q tunneling ethertype", "cmd": "Router(config)# interface gigabitethernet 1/0/0\nRouter(config-if)# dot1q tunneling ethertype 0x9200", "desc": "To define the Ethertype field type used by peer devices when implementing Q-in-Q VLAN tagging, use the dot1qtunnelingethertypecommand in interface configuration mode. To remove the VLAN tag Ethertype," }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "down-when-looped", "cmd": "Router(config)# interface serial0\nRouter(config-if)# encapsulation hdlc\nRouter(config-if)# down-when-looped", "desc": "To configure an interface to inform the system that it is down when loopback is detected, use the down-when-loopedcommand in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ds0-group (J1 controller)", "cmd": "Router(config-controller)# ds0-group 1 timeslots 1-15,17-31 type e&m-wink-start\nRouter(config-controller)# end\nRouter# show controllers j1", "desc": "To configure channelized J1 time slots, use theds0-groupcommandincontroller configuration mode. To remove the DS0 group, use theno form of this command. ds0-group ds0-group-no timeslots timeslot-list " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "dsl-group", "cmd": "Router(config-controller)# dsl-group 1 pairs 0-1 ima\nRouter(config-controller-dsl-group)#\nRouter(config-controller)# dsl-group auto\nRouter(config-controller-dsl-group-auto)#\nRouter(config-controller)# dsl-group pairs 0\nRouter(config-controller-dsl-group)#\nRouter(config-controller)# dsl-group pairs 0-3 efm-bond\nRouter(config-controller-dsl-group)#", "desc": "To create and configure a digital subscriber line (DSL) group, and enter config-controller-dsl-group mode, or to automatically configure an ATM group, use the dsl-groupcommand in configuration control" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "dsl-mode shdsl symmetric annex", "cmd": "Router# configure terminal\nRouter(config)# controller dsl 0/0\nRouter(config-controller)# line-term co\nRouter(config-controller)# dsl-mode shdsl symmetric annex b\nRouter(config-controller)# mode atm\nRouter(config-controller)#\nRouter(config-controller)# line-mode 4-wire\nRouter> enable\nRouter# configure terminal\nRouter(config)# controller dsl 0", "desc": "To specify the operating mode of the digital subscriber line (DSL) controller, use the dsl-mode shdsl symmetric annexcommand in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "dsu bandwidth", "cmd": "Router(config)# interface serial 1/0/0\nRouter(config-if)# dsu bandwidth 16000\nRouter# show interfaces serial", "desc": "To specify the maximum allowable bandwidth used by a T3 or E3 controller or the PA-T3 and PA-E3 port adapters, use the dsubandwidthcommand in interface configuration mode. To return to the default ban" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "dsu mode", "cmd": "Router(config)# interface serial 1/0/0\nRouter(config-if)# dsu mode 1\nRouter(config-if)# mtu 4474\nRouter(config-if)# ip address 192.168.93.114 255.255.255.252\nRouter(config-if)# ip mtu 4470\nRouter(config-if)# dsu mode 1\nRouter(config-if)# dsu bandwidth 44210\nRouter(config)# interface serial 1/0/0\nRouter(config-if)# dsu mode cisco", "desc": "To specify the interoperability mode used by a T3 or E3 controller or the PA-T3 and PA-E3 port adapters, use the dsumodecommand in interface configuration mode. To return to the default mode, use the " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "dte-invert-txc", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# dte-invert-txc", "desc": "To invert the transmit external clock (TXC) signal received from the DCE when the device is operating as a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "duplex", "cmd": "Device(config)# interface fastethernet 0\nDevice(config-if)# duplex full\nDevice# configure terminal\nDevice(config)# interface fastethernet 2/1/1\nDevice(config-if)# duplex half\nDevice(config-if)# speed auto", "desc": "To configure the duplex operation on an interface, use the duplex command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "dxi interface-dfa", "cmd": "Router(config)# interface serial 1\nRouter(config-if)# dxi interface-dfa 10", "desc": "To specify a map command for a point to point serial interface, use the Data Exchange Interface (dxi) command dxiinterface-dfa in interface configuration mode. To deletct the map command, use the no f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "dxs3mode", "cmd": "dxs3mode\ndxs3mode [e3 | t3]\nno dxs3mode [e3 | t3]", "desc": "To define the controller type as an E3 or T3 controller, use the dxs3mode command in controller configuration mode. To remove the controller, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "e2-clockrate", "cmd": "Router(config-if)#", "desc": "To configure serial interface 0 for E2 (8 MHz full duplex) and to shut down the other three serial interfaces (1 to 3), use the e2-clockrate command in interface configuration mode. To disable the ful" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "early-token-release", "cmd": "Router(config)# interface tokenring 1\nRouter(config-if)# early-token-release\nRouter(config)# interface tokenring 4/1\nRouter(config-if)# early-token-release", "desc": "To enable early token release on Token Ring interfaces, use the early-token-release command in interface configuration mode. To disable this function, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "efm-grp", "cmd": "Router(config-controller-dsl-group)# efm-grp ?\nRouter(config-controller-dsl-group)# efm-grp add ?\nRouter(config-controller-dsl-group)# efm-grp add link ?", "desc": "Interfaces — efm-grp" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "emulation-mode", "cmd": "emulation-mode\nno emulation-mode", "desc": "To configure Configuration Circuit Emulation (CEM), use the emulation-mode command in unidirectional emulation-mode {bidirectional | unidirectional {rx | tx}}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "encapsulation", "cmd": "Router(config)# interface serial 1\nRouter(config-if)# encapsulation hdlc\nRouter(config)# interface serial 0\nRouter(config-if)# encapsulation ppp\nRouter(config)# interface async 1\nRouter(config-if)# encapsulation ppp\nRouter# show interfaces serial 7/3:1", "desc": "To set the encapsulation method used by the interface, use the encapsulation command in interface configuration mode. To remove the encapsulation, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "end (satellite initial configuration)", "cmd": "Router(sat-init-config)# end\nRouter#\nRouter(sat-init-config)# end\nRouter#", "desc": "To exit satellite initial configuration mode, save any new or changed parameters, and reset the Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT), use the end command in satellite initial co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "equipment loopback", "cmd": "equipment loopback\nequipment [customer | network] loopback\nno equipment [customer | network] loopback", "desc": "To run loopbacks in conjunction with remote equipment, use the equipmentloopbackcommand in controller configuration mode. To terminate the loopback, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "errdisable recovery", "cmd": "Router(config)#\nRouter(config)#", "desc": "To configure recovery mechanism variables, use the errdisable recovery command in global configuration mode. To return to the default state, use the no form of this command. errdisable recovery {cause" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "error throttling", "cmd": "Router(config-controller)# error throttling\nRouter# show controllers t3 2/1/0\nRouter# show controller e3 5/0", "desc": "To stop receiving error data packets on multiple channel groups configured on all interfaces on the T1 controller of a channelized T3 port adapter or on the E1 controller of a channelized E3 port adap" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "esmc mode ql-disabled", "cmd": "Device(config-if)# esmc mode ql-disabled", "desc": "To disable the Ethernet synchronization message channel (ESMC) on an interface, use the esmc mode ql-disabledcommand in interface configuration mode. To remove the quality level (QL) disabled mode and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "esmc process", "cmd": "Device(config)# esmc process", "desc": "To enable the Ethernet synchronization message channel (ESMC) process in a router, use the esmc processcommand in global configuration mode. To disable the process, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "exit (satellite initial configuration)", "cmd": "Router(sat-init-config)# exit\nRouter#\nRouter(sat-init-config)# exit\nRouter#", "desc": "To exit satellite initial configuration mode, save any new or changed parameters, and reset the Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT), use the exit command in satellite initial c" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fabric buffer-reserve", "cmd": "Router(config)# fabric buffer-reserve high\nRouter(config)#\nRouter(config)# fabric buffer-reserve low\nRouter(config)#", "desc": "To reserve ASIC buffers, use the fabricbuffer-reserve command. in global configuration mode. To return to the default settings, use the no form of this command. fabric buffer-reserve [high | low | med" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fabric clear-block", "cmd": "Router(config)# fabric clear-block\nRouter(config)#\nRouter(config)# no fabric clear-block\nRouter(config)#", "desc": "To enable the clear-block congestion control for the fabric channels, use the fabricclear-block command in global configuration mode. To disable the clear-block congestion control for the fabric chann" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fabric error-recovery fabric-switchover (virtual switch)", "cmd": "Router(config)# fabric switch 2 error-recovery fabric-switchover\nRouter(config)#\nRouter(config)# no fabric switch 2 error-recovery fabric-switchover\nRouter(config)#", "desc": "To enable a supervisor engine switchover when excessive fabric synchronization errors are detected on the fabric-enabled module, use the fabricerror-recoveryfabric-switchover command in global configu" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fabric lcd-banner", "cmd": "Router(config)# fabric lcd-banner#\nRouter(config)# fabric lcd-banner%", "desc": "To specify the message-of-the-day (MOTD) banner for display on the Switch Fabric Module, use the fabriclcd-banner command in global configuration mode. To delete the MOTD banner, use the no form of th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fabric required", "cmd": "Router(config)#\nRouter(config)#\nRouter(config)#\nRouter(config)#", "desc": "To prevent the Cisco 7600 series routers from coming online without a Switch Fabric Module, use the fabricrequiredcommand in global configuration mode. To allow the Cisco 7600 series routers to come u" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "facility-alarm", "cmd": "Router> enable\nRouter# config terminal\nRouter(config)# facility-alarm core-temperature major 53\nRouter> enable\nRouter# config terminal\nRouter(config)# facility-alarm core-temperature minor 50", "desc": "To configure threshold temperatures for minor, major, and critical alarms, use the facility-alarm command in global configuration mode. To disable alarms for the threshold and reset the threshold to t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "facility-alarm critical exceed-action shutdown", "cmd": "Router(config)# facility-alarm critical exceed-action shutdown", "desc": "To allow automatic router shutdown, use the facility-alarm critical exceed-action shutdown command in global configuration mode. To disable automatic router shutdown, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "facility-alarm detect", "cmd": "Router(config)# facility-alarm detect rps", "desc": "To turn on the facility alarms, use the facility-alarmdetect command in global configuration mode. To turn off the alarm, use the no form of this command. facility-alarm detect {controller controller " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "factory-reset all", "cmd": "Router>enable\nRouter>factory-reset all", "desc": "To erase all the user-configured data, use the factory-reset all command in EXEC mode:" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "factory-reset keep-licensing-info", "cmd": "factory-reset keep-licensing-info\ncommand in EXEC mode:\nfactory-reset keep-licensing-info", "desc": "To erase all the user-configured data except the licensing information, use the factory-reset keep-licensing-info" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "factory-reset all secure 3-pass", "cmd": "factory-reset all secure 3-pass", "desc": "To erase all data using the the National Industrial Security Program Operating Manual (DoD 5220.22-M)" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi burst-count", "cmd": "Router(config)# interface fddi 0\nRouter(config-if)# fddi burst-count 5", "desc": "To allow the FCI card to preallocate buffers to handle bursty FDDI traffic (for example, Network File System [NFS] bursty traffic), use the fddiburst-count command in interface configuration mode. To " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi c-min", "cmd": "Router(config)# interface fddi 0\nRouter(config-if)# fddi c-min 2000", "desc": "To set the C-Min timer on the pulse code modulation (PCM), use the fddic-min command in interface configuration mode. To revert to the default value, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi cmt-signal-bits", "cmd": "Router(config)# interface fddi 0\nRouter(config-if)# fddi cmt-signal-bits 0x208", "desc": "To control the information transmitted during the connection management (CMT) signaling phase, use the fddicmt-signal-bitscommand in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi duplicate-address-check", "cmd": "Router(config)# interface fddi 0\nRouter(config-if)# fddi duplicate-address-check", "desc": "To enable the duplicate address detection capability on the FDDI interface, use the fddiduplicate-address-check command in interface configuration mode. To disable this function, use the no form of th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi encapsulate", "cmd": "Router(config)# interface fddi 1\nRouter(config-if)# fddi encapsulate", "desc": "To specify encapsulating bridge mode on the CSC-C2/FCIT interface card, use the fddiencapsulate command in interface configuration mode. To turn off encapsulation bridging and return the FCIT interfac" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi frames-per-token", "cmd": "Router(config-if)# fddi frames-per-token 4", "desc": "To specify the maximum number of frames that the FDDI interface transmits per token capture, use the fddiframes-per-token command in interface configuration mode. To revert to the default value, use t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi smt-frames", "cmd": "Router(config)# interface fddi 0\nRouter(config-if)# no fddi smt-frames", "desc": "To enable the Station Management (SMT) frame processing capability on the FDDI, use the fddismt-frames command in interface configuration mode. To disable this function and prevent the Cisco IOS softw" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi tb-min", "cmd": "Router(config)# interface fddi 0\nRouter(config-if)# fddi tb-min 200", "desc": "To set the TB-Min timer in the physical connection management (PCM), use the fdditb-min command in interface configuration mode. To revert to the default value, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi tl-min-time", "cmd": "Router(config)# interface fddi 0\nRouter(config-if)# fddi tl-min-time 100\nRouter(config)# interface fddi 3/0\nRouter(config-if)# fddi tl-min-time 100", "desc": "To control the TL-Min time (the minimum time to transmit a Physical Sublayer, or PHY line state, before advancing to the next physical connection management [PCM] state, as defined by the X3T9.5 speci" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi token-rotation-time", "cmd": "Router(config)# interface fddi 0\nRouter(config-if)# fddi token-rotation-time 24000\nRouter(config)# interface fddi 3/0\nRouter(config-if)# fddi token-rotation-time 24000", "desc": "To control ring scheduling during normal operation and to detect and recover from serious ring error situations, use the fdditoken-rotation-time command in interface configuration mode. To revert to t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi t-out", "cmd": "Router(config)# interface fddi 0\nRouter(config-if)# fddi t-out 200", "desc": "To set the timeout timer in the physical connection management (PCM), use the fddit-out command in interface configuration mode. To revert to the default value, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fddi valid-transmission-time", "cmd": "Router(config)# interface fddi 0\nRouter(config-if)# fddi valid-transmission-time 3000\nRouter(config)# interface fddi 3/0\nRouter(config-if)# fddi valid-transmission-time 3000", "desc": "To change the transmission valid timer (TVX) interval, use thefddivalid-transmission-time command in interface configuration mode. To revert to the default value, use the no form of this command. fddi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "fdl", "cmd": "Router(config)# interface atm 0/2\nRouter(config-if)# fdl all\nRouter(config)# interface atm 1/0/0\nRouter(config-if)# fdl att", "desc": "To set the Facility Data Link (FDL) exchange standard for CSU controllers or to set the FDL exchange standard for a T1 interface that uses the Extended Super Frame (ESF) framing format, use the fdl co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "flowcontrol", "cmd": "Router# configure terminal\nRouter(config)# interface GigabitEthernet1/9 10.4.9.157 255.255.255.0\nRouter(config-if)# flowcontrol receive off\nRouter(config-if)# flowcontrol send off", "desc": "To configure a port to send or receive pause frames, use the flowcontrol command in interface configuration mode. To return to the default settings, use the no form of this command. flowcontrol {send " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "frame-relay", "cmd": "Router(config-if)# frame-relay payload-compression frf9 stac caim 0", "desc": "To configure Frame Relay payload compression for each Frame Relay port, use the frame-relaycommand in interface configuration mode. To terminate this form of payload compression over Frame Relay, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "framing", "cmd": "Router(config)# controller t1 4/0\nRouter(config-controller)# framing esfadm", "desc": "To select the frame type for the T1 or E1 data line, use the framing command in controller configuration framing {crc4adm | pcm30adm | clear e1}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "framing (CEM)", "cmd": "Router(config-controller)# framing\nRouter(config-controller)# framing no-crc4\nRouter(config-controller)# framingunframed\nRouter(config-controller)# framingcrc4", "desc": "To specify the framing format of a circuit emulation (CEM) T1 or E1 port, use the framing command in controller configuration mode. To reset the framing format of the port to its default value, use th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "framing (E3 controller)", "cmd": "Router(config)# controller e3 1/0\nRouter(config-controller)# framing bypass", "desc": "To specify the type of framing used by the E3 controller, use the framingcommand in controller configuration mode. To restore the default framing type, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "framing (SONET)", "cmd": "Router(config)# controller sonet 2/0\nRouter(config-controller)# framing sonet", "desc": "To select the frame type of the frame received on an optical line, use the framingcommand in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "framing (T1 E1 controller)", "cmd": "Router(config-controller)# framing esf", "desc": "To select the frame type for the T1 or E1 data line, use the framing command in controller configuration mode. To return to the default, use the no form of the command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "framing (T3 controller)", "cmd": "Router# configure terminal\nRouter(config)# controller t1 6/0/0\nRouter(config-controller)# framing m23\nRouter(config)# controller t3 9/0/0\nRouter(config-controller)# framing c-bit", "desc": "To choose framing mode on a T3 port, use the framingcommand in controller configuration mode. To return to the default mode, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "framing (T3-E3 interface)", "cmd": "Router(config)# interface serial 1/0/0\nRouter(config-if)# framing bypass", "desc": "To choose framing mode on a T3 or E3 port, use the framingcommand in interface configuration mode. To return to the default mode, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "full-duplex", "cmd": "Router(config)# interface fastethernet 0/1\nRouter(config-if)# full-duplex\nRouter(config)# interface serial 0\nRouter(config-if)# encapsulation bstun\nRouter(config-if)# full-duplex\nRouter(config)# interface fddi 0/1/0\nRouter(config-if)# full-duplex", "desc": "To specify full-duplex mode on full-duplex single-mode and multimode port adapters, use the full-duplexcommand in interface configuration mode. To restore the default half-duplex mode, use the no form" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "g709 disable", "cmd": "g709 disable\ng709 disable\nno g709 disable", "desc": "To disable the ITU-T G.709 wrapper, use the g709 disable command in DWDM configuration mode. To enable the ITU-T G.709 wrapper, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "g709 fec", "cmd": "Router(config)# controller dwdm 1/3\nRouter(config-controller)# g709 fec standard", "desc": "To configure the forward error correction (FEC) mode for the DWDM controller, use the g709feccommand in controller configuration mode. To return to the default state, use the no form of this command. " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "g709 odu report", "cmd": "Router(config)# controller dwdm 1/2\nRouter(config-controller)# g709 odu report oci", "desc": "To enable the logging of selected optical channel data unit (ODU) alarms to the console for a DWDM controller, use the g709odureportcommand in controller configuration mode. To disable logging, use th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "g709 odu overhead tti", "cmd": "Router(config)# controller dwdm 0/1/0/0\nRouter(config-dwdm)# g709 odu overhead tti expected ascii test_odu_5678", "desc": "To configure the Trail Trace Identifier (TTI) level for an Optical Channel Data Unit (ODU), use the g709oduoverheadtticommand in DWDM configuration mode. To return to the default, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "g709 odu threshold", "cmd": "Router(config)# controller dwdm 1/2\nRouter(config-controller)# g709 odu threshold sf-ber 5", "desc": "To configure thresholds for selected optical channel data unit (ODU) bit error rate (BER) alarms, use the g709oduthresholdcommand in controller configuration mode. To return to the default state, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "g709 otu report", "cmd": "Router(config)# controller dwdm 1/2\nRouter(config-controller)# g709 otu report iae", "desc": "To enable the logging of selected optical channel transport unit (OTU) alarms to the console for a DWDM controller, use the g709otureportcommand in controller configuration mode. To disable logging, u" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "g709 otu threshold", "cmd": "Router(config)# controller dwdm 1/2\nRouter(config-controller)# g709 otu threshold sm-tca 5", "desc": "To configure thresholds for selected optical channel transport unit (OTU) bit error rate (BER) alarms, use the g709otuthresholdcommand in controller configuration mode. To return to the default state," }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "g709 tti-processing enable", "cmd": "g709 tti-processing enable\ng709 tti-processing enable {odu | otu}", "desc": "To configure Trail Trace Identifier (TTI), use the g709 tti-processing enable command in the controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "gnss", "cmd": "Router# configure terminal\nRouter(config)# gnss slot r0\nRouter(config-gnss)# no shutdown", "desc": "To enable the global navigation satellite system (GNSS) module on the Cisco ASR 903, Cisco ASR 907, and the Cisco ASR 920 routers, use the gnss command in the global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "gtp", "cmd": "Device(config)# gtp\nDevice(config-gtp)# n3-request 3\nDevice(config-gtp)# interval t3-response 30\nDevice(config-gtp)# information-element rat-type wlan\nDevice(config-gtp)# interface local GigabitEthernet0/0/0\nDevice(config-gtp)# apn 1\nDevice(config-gtp-apn)# apn-name starent.com\nDevice(config-gtp-apn)# ip address ggsn 10.1.2.1\nDevice(config-gtp-apn)# dns-server 10.1.2.1\nDevice(config-gtp-apn)# dhcp-server 10.10.197.1", "desc": "To enables Enhanced Wireless Access Gateway (EWAG) General packet radio service (GPRS) Tunneling" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "half-duplex", "cmd": "Router(config-if)# encapsulation sdlc-primary\nRouter(config-if)# half-duplex", "desc": "To specify half-duplex mode on an Synchronous Data Link Control (SDLC) interface or on the FDDI full-duplex, single-mode port adapter and FDDI full-duplex, multimode port adapter on the Cisco 7200 ser" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "half-duplex controlled-carrier", "cmd": "Router(config)# interface serial 2\nRouter(config-if)# half-duplex controlled-carrier\nRouter(config)# interface serial 2\nRouter(config-if)# no half-duplex controlled-carrier", "desc": "To place a low-speed serial interface in controlled-carrier mode, instead of constant-carrier mode, use the half-duplexcontrolled-carriercommand in interface configuration mode. To return the interfac" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "half-duplex timer", "cmd": "Router(config)# interface serial 2\nRouter(config-if)# half-duplex timer cts-delay 10\nRouter(config-if)# half-duplex timer transmit-delay 50", "desc": "To tune half-duplex timers, use the half-duplextimer command in interface configuration mode. To return to the default parameter values, use the no form of this command. half-duplex timer {cts-delay v" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "history (interface)", "cmd": "Device(config-if)# history bps input-drops", "desc": "To enable an interface to maintain utilization history, use the history command in interface configuration mode. To disable an interface, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hold-queue", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# hold-queue 30 in\nDevice# configure terminal\nDevice(config)# template user-template1\nDevice(config-template)# hold-queue 30 in\nDevice(config-template)# end\nRouter# configure terminal\nRouter(config)#interface GigabitEthernet3/0/0\nRouter(config-if)#hold-queue 30 in", "desc": "To limit the length of the IP output queue on an interface, use the hold-queue command in interface configuration or template configuration mode. To restore the default values, use the no form of this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hssi external-loop-request", "cmd": "Router(config-if)# hssi external-loop-request", "desc": "To allow the router to support a CSU/DSU that uses the loopback circuit (LC) signal to request a loopback from the router, use the hssiexternal-loop-request command in interface configuration mode. To" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hssi internal-clock", "cmd": "Router(config-if)# hssi internal-clock", "desc": "To convert the High-Speed Serial Interface (HSSI) into a clock master, use the hssiinternal-clock command in interface configuration mode. To disable the clock master mode, use the no form of this com" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hub", "cmd": "Router# hub ethernet 0 1\nRouter(config-hub)# no shutdown\nRouter# hub ethernet 0 1 8\nRouter(config-hub)# no shutdown", "desc": "To enable and configure a port on an Ethernet hub of a Cisco 2505 or Cisco 2507 router, use the hub command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module boot", "cmd": "Router# hw-module module 1 boot config-register\nRouter#\nRouter# hw-module module 1 boot eobc\nRouter#", "desc": "To specify the boot options for the module through the power management bus control register, use the hw-moduleboot command in privileged EXEC mode. hw-module module num boot [value] {config-register " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module energywise level", "cmd": "Router#hw-module\nRouter#hw-module", "desc": "Interfaces — hw-module energywise level" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module interface als restart", "cmd": "Router# hw-module interface TenGigabitEthernet 6/2 als restart", "desc": "To request a restart pulse when Automatic Laser Shutdown (ALS) restart mode is configured as manual, use the hw-module interface TenGigabitEthernet als restart command in Privileged EXEC mode. hw-modu" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module main-cpu qa error-recovery", "cmd": "Router(config)# hw-module main-cpu qa error-recovery", "desc": "To enable the recovery mechanism for a QA error condition on a Cisco 7500 series router, use the hw-modulemain-cpuqaerror-recovery command in global configuration mode. To disable the recovery mechani" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module mode", "cmd": "Router# configure terminal\nRouter(config)# platform hw-module configuration\nRouter(conf-plat-hw-conf)# hw-module 0/3 A900-IMA8Z mode ?\nRouter(conf-plat-hw-conf)#hw-module 0/3 A900-IMA8Z mode 4-ports-only", "desc": "To configure the interface module from 10G to 5G mode, use the hw-module mode command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module oversubscription", "cmd": "Router #\nRouter #\nRouter #\nRouter #", "desc": "To administratively disable the oversubscribed ports (3, 4, 7, and 8) on a module, use the hw-moduleoversubscription command. Use the no form of this command to enable the oversubscribed ports." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module power-supply power-cycle", "cmd": "Router# hw-module power-supply 2 power-cycle\nRouter#", "desc": "To power cycle the power supplies, use the hw-modulepower-supplypower-cyclecommand in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module pxf stall-monitoring", "cmd": "Router# configure terminal\nRouter(config)# hw-module pxf stall-monitoring\nRouter(config)# hw-module pxf stall-monitoring HT-Reset 5\nRouter(config)# hw-module pxf stall-monitoring LC-Reset 4", "desc": "To enable the parallel express forwarding (PXF) stall monitor on the Cisco 10000 series router, and configure the default threshold values for resetting the line card (LC) and the Hyper Transport Data" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module sec-cpu reset", "cmd": "Router(config)# hw-module slot 7 image slot0:rsp-pv-mz\nRouter(config)# end\nRouter# hw-module sec-cpu reset", "desc": "To reset and reload the standby Route Switch Processor (RSP) with the specified Cisco IOS image and to execute the image, use the hw-modulesec-cpureset command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module shutdown", "cmd": "Router# hw-module module 3 shutdown\nRouter# no power enable module 3\nRouter# power enable module 3", "desc": "To shut down the module, use the hw-module shutdown command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module simulate link-up", "cmd": "Router# hw-module module 3 simulate link-up\nRouter#", "desc": "To enable softlink on a specified module, use the hw-modulesimulatelink-upcommand in privileged EXEC mode. For information on disabling softlink, refer to the “Usage Guidelines” section." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module slot", "cmd": "Router# hw-module slot 1/13 stop\nRouter# hw-module slot 1/12 start\nRouter# hw-module slot 1/6 reload\nRouter# hw-module slot 1/3 reset\nRouter# hw-module slot 1/3 shutdown powered", "desc": "Interfaces — hw-module slot" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module slot (6500)", "cmd": "Router#\nRouter#\nRouter#\nRouter#\nRouter#\nRouter#\nRouter#\nRouter#", "desc": "To enable ports on a module, use the hw-moduleslot command. To disable ports on a module, use the no form of this command. hw-module slot num {clear-block | oversubscription} [port-group num]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module slot (7300)", "cmd": "Router# hw-module slot 2 stop\nRouter# hw-module slot 2 start", "desc": "To prepare a line card, MSC, or PCI port adapter carrier card for online removal, use thehw-moduleslot command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module slot (7600)", "cmd": "Device(config)# hw-module slot 2 rate-limit fsol_rate 50000\nDevice(config)# hw-module slot 2 rate-limit punt_rate 70000", "desc": "To enable ports on a module, use the hw-module slot command in global configuration mode. To disable the ports, use the no form of this command. hw-module slot slot-number {memory test full | oversubs" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module slot (ASR 1000 Series)", "cmd": "Router# hw-module slot r0 stop\nRouter# show logging onboard slot r0 status\nRouter# hw-module slot r0 logging onboard disable\nRouter# show logging onboard slot r0 status\nRouter(config)# hw-module slot 0 qos input link ?", "desc": "To start, stop, reload, or enable logging for an Embedded Services Processor (ESP), Route Processor (RP), or Shared Port Adapter (SPA) Interface Processor (SIP) on a Cisco ASR 1000 Series Aggregation " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module slot image", "cmd": "Router(config)# hw-module slot 6 image slot0:rsp-pv-mz\nRouter(config)# hw-module slot 7 image slot0:rsp-pv-mz", "desc": "To specify a high availability Cisco IOS image to run on an active or standby Route Switch Processor (RSP), use the hw-moduleslotimage command in global configuration mode. To remove a high availabili" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module slot subslot only", "cmd": "Router(config)# hw-module slot 4 subslot 1 only", "desc": "Interfaces — hw-module slot subslot only" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module standby", "cmd": "Router# hw-module standby reset\nRouter# hw-module standby reload\nRouter# hw-module standby reload", "desc": "To reset the standby Route Processor (RP), use the hw-modulestandbycommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module subslot", "cmd": "Router# hw-module subslot 1/1 reload", "desc": "To restart, stop, or start a shared port adapter (SPA) and its interfaces, use the hw-modulesubslotcommand in privileged EXEC mode. hw-module subslot slot/subslot {reload [force] | start | stop [force" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module subslot (4400)", "cmd": "Router# hw-module subslot 1/1 start", "desc": "To restart, stop, or start a module and its interfaces, use the hw-modulesubslot command in privileged EXEC hw-module subslot slot/subslot {reload | start | stop }" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module subslot ethernet vlan unlimited", "cmd": "Router(config)# hw-module subslot 1/0 ethernet vlan unlimited", "desc": "To remove the restriction of a maximum of 8100 IEEE 802.1Q VLANs per Ethernet shared port adapter (SPA), use the hw-modulesubslotethernetvlanunlimited command in global configuration mode. To disable " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module subslot (LAN WAN)", "cmd": "Router# config\nRouter(config)# hw-module subslot 2/1 enable LAN\nRouter# config\nRouter(config)# hw-module subslot 2/1 enable WAN", "desc": "To configure the Cisco 1-Port 10 Gigabit Ethernet LAN/WAN-PHY Shared Port Adapter to run in either the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module subslot service-engine session", "cmd": "Router# hw-module subslot 1/0 service-engine session", "desc": "To open a console session to access the Cisco WebEx Node SPA console, use the hw-modulesubslotservice-enginesessioncommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module subslot session", "cmd": "Router# hardware-module subslot 1/0 session imc\nRouter# hardware-module subslot 1/0 session server", "desc": "To start or close a Cisco Integrated Management Controller (CIMC) session or host server module session, use the hw-module subslot session command in privileged EXEC mode. hw-module subslot slot/subsl" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module subslot shutdown", "cmd": "Router(config)# hw-module subslot 4/1 shutdown unpowered\nRouter(config)# hw-module subslot 4/1 shutdown powered", "desc": "To disable a shared port adapter (SPA) with or without power, and save the configuration to the configuration file, use the hw-modulesubslotshutdowncommand in global configuration mode. To re-enable t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "hw-module subslot shutdown (4400)", "cmd": "Router(config)# hw-module subslot 0/2 shutdown unpowered\nRouter(config)# hw-module subslot 0/2 shutdown powered", "desc": "To disable a module with or without power, and save the configuration to the configuration file, use the hw-module subslot shutdown command in global configuration mode. To re-activate the module, use" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "id aa-group", "cmd": "Router(sat-init-config)# id aa-group 336", "desc": "To configure the asynchronous acknowledgement group ID, use the idaa-groupcommand in satellite initial configuration mode. To remove the ID configuration, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "id software group", "cmd": "Router(sat-init-config)# id software group 598", "desc": "To configure the operational software group identification number, use the idsoftwaregroupcommand in satellite initial configuration mode. To remove the ID configuration, use the no form of this comma" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "id vsat", "cmd": "Router(sat-init-config)# id vsat 1284", "desc": "To configure the component physical address (CPA), use the idvsatcommand in satellite initial configuration mode. To remove the CPA configuration, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "idle-pattern", "cmd": "Router(config-cem)# idle-pattern 32 0x12345678", "desc": "To define the idle pattern that a circuit emulation (CEM) channel transmits when the channel experiences an underrun condition or to replace any missing packets, use the idle-patterncommand in CEM con" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ids-service-module monitoring", "cmd": "Router(config)# interface FastEthernet0/0\nRouter(config-if)# ids-service-module monitoring", "desc": "To enable Intrusion Detection System (IDS) monitoring on a specified interface, use the ids-service-modulemonitoring command in interface configuration mode. To perform IDS monitoring, the routing dev" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "if-mgr delete", "cmd": "Router# if-mgr delete ifindex-pool 2 5", "desc": "To delete the unused interface identification numbers (ifIndex) from the system interface, use the if-mgrdelete command in privileged EXEC mode. if-mgr delete {ifindex-pool initial-ifindex number-of-i" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ignore (interface)", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# ignore dcd", "desc": "To configure the serial interface to ignore the specified serial signals as the line up/down indicator, use the ignorecommand in interface configuration mode. To restore the default, use the no form o" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ignore-dcd", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# ignore-dcd", "desc": "To configure the serial interface to monitor the Data Set Ready (DSR) signal instead of the Data Carrier Detect (DCD) signal as the line up/down indicator, use the ignore-dcd command in interface conf" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ignore-error-duration", "cmd": "Router(config)# controller dsl\nRouter(config-controller)# ignore-error-duration", "desc": "To ignore initial train-up errors when the DSL controller is connected to DSLAMs with chipsets other than" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ignore-hw local-loopback", "cmd": "Router(config)# interface serial 2\nRouter(config-if)# ignore-hw local-loopback", "desc": "To disable the monitoring of the (local-loopback) LL pin when in DCE mode, use the ingnore-hwlocal-loopback command in interface configuration mode. To enable the monitoring of the LL pin, use the no " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "imc access-port", "cmd": "Router(config)# interface ucse 2/0\nRouter(config-if)#\nRouter(config)# ucse subslot 1/0\nRouter(config-ucse)#\nRouter# configure terminal\nRouter(config)# interface ucse 2/0\nRouter(config-if)# imc ip address 10.0.0.2 255.0.0.0 default-gateway 10.0.0.1\nRouter(config-if)# imc access-port dedicated\nRouter(config-if)# no shut\nRouter(config-if)# end", "desc": "To configure Cisco Integrated Management Controller (CIMC) access through the server module's dedicated, management, or host ports, use the imc access-port command in interface configuration mode or U" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "imc config file", "cmd": "Router(config)# interface ucse slot/port\nRouter(config)# interface ucse 2/0\nRouter(config-if)# imc config file flash0:my-imc-config", "desc": "To store the name of a CIMC configuration file in the running configuration, use the imc config file command from interface configuration mode ." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "imc ip address default-gateway", "cmd": "Router(config)# interface ucse 2/0\nRouter(config-if)# imc ip address 10.0.0.2 255.0.0.0 default-gateway 10.0.0.1", "desc": "To configure a static IP address for CIMC and the IP address of the default gateway router that CIMC must use, use the imc ip address default-gateway command in interface configuration mode. To remove" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "imc ip address dhcp", "cmd": "Router(config)# interface ucse 2/0\nRouter(config-if)# imc ip address dhcp", "desc": "To configure a DHCP IP address for CIMC, use the imc ip address dhcp command in interface configuration mode. To remove the DHCP IP address, use the no form of the this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "imc ip dhcp", "cmd": "Router# configure terminal\nRouter(config)# ucse subslot 1/0\nRouter(config-ucse)# imc ip dhcp\nRouter(config-ucse)#", "desc": "To configure a DHCP IP address for the Cisco Integrated Management Controller (CIMC), use the imc ip dhcp command in UCSE configuration mode. To remove the DHCP IP address, use the no form of this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "imc vlan", "cmd": "Router(config)# interface ucse 2/0\nRouter(config-if)# interface vlan 40", "desc": "To enter VLAN configuration mode for the specified VLAN number, use the imc vlan command in interface configuration mode. To remove the VLAN configuration, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface", "cmd": "Router(config)# interface analysis-module 1/0\nRouter(config)# interface group-async 0\nRouter(config)# interface content-engine 1/0\nRouter(config)# interface ethernet 2/4\nRouter(config)# ip traffic-export profile corp1\nRouter(config-rite)# interface FastEthernet 0/1\nRouter(config-rite)# bidirectional\nRouter(config-rite)# mac-address 00a.8aab.90a0\nRouter(config-rite)# outgoing sample one-in-every 50\nRouter(config-rite)# incoming access-list ham_acl", "desc": "To configure an interface type and to enter interface configuration mode, use the interface command in the appropriate configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces Displays information about interfaces.", "cmd": "show interfaces Displays information about interfaces.\ninterface\ninterface analysis-module", "desc": "Interfaces — show interfaces Displays information about interfaces." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface analysis-module", "cmd": "Router(config)# interface analysis-module 1/0", "desc": "To configure the Analysis-Module interface on the router that connects to an installed Network Analysis" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface content-engine", "cmd": "interface content-engine\ninterface fastethernet", "desc": "Interfaces — interface content-engine" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface fastethernet", "cmd": "interface fastethernet\ninterface gigabitethernet", "desc": "Interfaces — interface fastethernet" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface gigabitethernet", "cmd": "interface gigabitethernet\ninterface group-async", "desc": "Interfaces — interface gigabitethernet" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface group-async", "cmd": "interface group-async\ninterface integrated-service-engine", "desc": "Interfaces — interface group-async" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface integrated-service-engine", "cmd": "Router(config)# interface integrated-service-engine\nRouter(config-if)# exit\nRouter(config)# interface integrated-service-engine\nRouter(config-subif)# encapsulation dot1q\nRouter(config-subif)# end", "desc": "To configure the Cisco wireless LAN controller network module (WLCM) interface with dot1q encapsulation on the router, use the interfaceintegrated-service-engine command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface ism", "cmd": "Router(config)# interface ism 0/0", "desc": "To configure an interface on the router that connects to an internal service module (ISM), use the interfaceism command in global configuration mode. This command does not have a no form." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface port-channel", "cmd": "interface port-channel\ninterface pos", "desc": "Interfaces — interface port-channel" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface pos", "cmd": "interface pos\ninterface range", "desc": "Interfaces — interface pos" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface range", "cmd": "Router(config)# interface range fastethernet 5/1 - 4\nRouter(config)# interface range fastethernet 5/1 - 4\nRouter(config-if-range)# encapsulation dot1q 301\nRouter(config-if-range)# no shutdown\nRouter(config-if)#\nRouter(config)# interface range gigabitethernet 1/1 - 6\nRouter(config)# interface range loopback 34567\nRouter(config)# interface range tunnel 55555\nRouter(config)# interface range port-channel 100\nRouter(config)# interface range vlan 123", "desc": "To execute commands on multiple subinterfaces at the same time, use the interfacerange command in global configuration mode. interface range {type number [[-interface number]] [,]... type number | mac" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface satellite", "cmd": "Router(config)# interface satellite 1/0\nRouter(config-if)#", "desc": "To enter satellite interface configuration mode, use the interfacesatellite command in global configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface service-engine", "cmd": "interface service-engine\ninterface service-engine slot/port", "desc": "To enter the interface configuration mode for a network module (NM) or an advanced Integration Module (AIM), use the interfaceservice-engine command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface sm", "cmd": "Router(config)# interface sm 1/0", "desc": "To configure an interface on the router that connects to an SM-SRE service module, use the interfacesm command in global configuration mode. This command does not have a no form." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface vg-anylan", "cmd": "interface vg-anylan\ninterface vmi", "desc": "Interfaces — interface vg-anylan" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface vmi", "cmd": "interface vmi\ninterface vmi interface-number\nno interface vmi interface-number", "desc": "To create a virtual multipoint interface (VMI) that can be configured and applied dynamically, use theinterfacevmi command in global configuration mode. To remove a VMI interface, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "interface wlan-controller", "cmd": "Router(config)# interface wlan-controller 1/0\nRouter(config-if)# exit\nRouter(config)# interface wlan-controller 1/0.10\nRouter(config-subif)# encapsulation dot1q 10\nRouter(config-subif)# end", "desc": "To configure the Cisco Wireless Local Area Network (WLAN) controller network module interface with dot1q encapsulation on the router, use the interfacewlan-controller command in global configuration m" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "international bit", "cmd": "Router(config)# interface serial 1/0/0\nRouter(config-if)# international bit 1 1", "desc": "To set the E3 international bit in the G.751 frame used by the PA-E3 port adapter, use the internationalbitcommand in interface configuration mode. To return to the default international bit, use the " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "inter-packet gap 6502-mode", "cmd": "inter-packet gap 6502-mode\ninter-packet gap 6502-mode\nno inter-packet gap 6502-mode", "desc": "To set the Inter-Packet Gap (IPG) value, use the inter-packetgap6502-modecommand in interface configuration mode. To return to the default setting, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "invert data", "cmd": "Router(config)# interface serial 3/1/0\nRouter(config-if)# invert data", "desc": "To invert the data stream, use the invertdata command in interface configuration mode. This command applies only to the Cisco 7000 series routers with the RSP7000 and RSP7000CI, Cisco 7200 series rout" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "invert rxclock", "cmd": "Router(config)# interface serial 1\nRouter(config-if)# invert rxclock", "desc": "To invert the phase of the receive (RX) clock signal on the universal I/O (UIO) serial interface that does not use the T1/E1 interface, use the invertrxclock command in interface configuration mode. T" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "invert txclock", "cmd": "Router(config)# interface serial 3/0\nRouter(config-if)# invert txclock", "desc": "To invert the transmit (TX) clock signal, use the inverttxclock command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ip dscp", "cmd": "Router(config-cem)# ip dscp 36", "desc": "To enable the use of IP differentiated services code point (DSCP) for packets that originate from a circuit emulation (CEM) channel, use the ipdscp command in CEM configuration mode. To disable the us" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ip pxf", "cmd": "ip pxf\nip pxf\nno ip pxf", "desc": "To manually enable the PXF processors, use the ippxf command in global configuration mode. To manually disable the PXF processors, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ip rbscp ack-split", "cmd": "ip rbscp ack-split\nno ip rbscp ack-split", "desc": "To configure the TCP ACK splitting feature of the Rate-Based Satellite Control Protocol (RBSCP) on an outgoing interface for packets that are permitted by a specified access list, use the iprbscpack-s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ip verify unicast source reachable-via", "cmd": "Router# configure terminal\nRouter(config)# interface Ethernet0/0\nRouter(config-if)# ip address 10.0.0.1 255.255.255.0\nRouter(config-if)# ip verify unicast source reachable-via rx l2-src", "desc": "To enable Unicast Reverse Path Forwarding (Unicast RPF), use the ip verify unicast source reachable-via command in interface configuration mode. To disable Unicast RPF, use the no form of this command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ipc buffers", "cmd": "Router(config)# ipc buffers max-free 10", "desc": "To resize the interprocessor communication (IPC) buffer pool, use the ipcbuffers command in global configuration mode. To disable the configuration, use the no form of this command. ipc buffers {max-f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ipc header-cache", "cmd": "Router(config)# ipc header-cache permanent 1000 200", "desc": "To resize the interprocess communication (IPC) permanent cache, use the ipcheader-cache command in global configuration mode. To disable the configuration, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ipc holdq threshold", "cmd": "Router(config)# ipc holdq threshold lower 100", "desc": "To configure interprocessor communication (IPC) holdq threshold values, use the ipcholdqthresholdcommand in global configuration mode. To disable the configuration, use the no form of this command. ip" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ipc master", "cmd": "Router(config)# ipc master 192.0.2.1", "desc": "To configure the IP address of the interprocessor communication (IPC) master server, use the ipcmaster command in global configuration mode. To disable the configuration, use the no form of this comma" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ipc zone default", "cmd": "Router(config)# ipc zone default\nRouter(config-ipczone)#", "desc": "To enter interprocess communication (IPC) zone configuration mode, use the ipczonedefaultcommand in global configuration mode. To remove a previously configured association, use the no form of this co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "iphc-profile", "cmd": "Router> enable\nRouter# configure terminal\nRouter(config)# iphc-profile profile1 van-jacobson\nRouter(config-iphcp)# end\nRouter> enable\nRouter# configure terminal\nRouter(config)# iphc-profile profile2 ietf\nRouter(config-iphcp)# end\nRouter> enable\nRouter# configure terminal", "desc": "To create an IP Header Compression (IPHC) profile and to enter IPHC-profile configuration mode, use the iphc-profile command in global configuration mode. To attach an existing IPHC profile to an inte" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "keepalive", "cmd": "Router(config)# interface ethernet 0\nRouter(config-if)# keepalive 3\nRouter(config)# interface tunnel 1\nRouter(config-if)# keepalive 3 7\nRouter(config)# interface tunnel 1\nRouter(config)# service internal\nRouter(config-if)# no keepalive proto-up", "desc": "To enable keepalive packets and to specify the number of times that the Cisco IOS software tries to send keepalive packets without a response before bringing down the interface or before bringing down" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "l2 vfi manual", "cmd": "Router(config)# l2 vfi vfitest1 manual\nRouter(config-vfi)# vpn id 303", "desc": "To create a Layer 2 virtual forwarding instance (VFI) and enter Layer 2 VFI manual configuration mode, use the l2vfimanual command in global configuration mode. To remove the Layer 2 VFI, use the no f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "l2protocol-tunnel", "cmd": "Router(config-if)# spanning-tree bpdufilter enable\nRouter(config-if)# spanning-tree portfast\nRouter> enable\nRouter# configure terminal\nRouter#(config)interface FastEthernet 0/0\nRouter(config-if)# l2protocol-tunnel cdp\nRouter> enable\nRouter# configure terminal\nRouter#(config)interface fastEthernet 4/0\nRouter(config-if)# no l2protocol-tunnel", "desc": "To enable the protocol tunneling on an interface and specify the type of protocol to be tunneled, use the l2protocol-tunnel command in global or interface configuration mode. To disable protocol tunne" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "l2protocol-tunnel global drop-threshold", "cmd": "Router(config)# l2protocol-tunnel global drop-threshold 3000\nRouter(config)#", "desc": "To enable rate limiting at the software level, use the l2protocol-tunnelglobaldrop-threshold command in global configuration mode. To disable the software rate limiter on the Cisco 7600 series routers" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "l2protocol-tunnel point-to-point", "cmd": "l2protocol-tunnel point-to-point\nno l2protocol-tunnel point-to-point [pagp | lacp | udld]", "desc": "To enable point-to-point protocol tunneling, use the l2protocol-tunnel point-to-point command in interface configuration mode. To disable, use the no form of this command. l2protocol-tunnel point-to-p" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "l3vpn encapsulation ip", "cmd": "Router(config)# l3vpn encapsulation ip tunnelencap", "desc": "To configure an L3VPN encapsulation profile, use the l3vpnencapsulationip command in global configuration mode. To remove the encapsulation profile, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lacp active-port distribution automatic", "cmd": "Router(config)# interface port23\nRouter(config-if)# lacp active-port distribution automatic\nRouter(config-if)# shutdown\nRouter(config-if)# no shutdown\nRouter(config-if)# end\nRouter# show running interface port23\nRouter# show etherchannel 23 summary", "desc": "To have an effective auto interleaved port priority distribution of active and bundled ports across different slots that are part of the same port channel distributed EtherChannel (DEC) and multichass" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lacp fast-switchover", "cmd": "Router(config-if)# lacp fast-switchover\nRouter(config-if)# no lacp fast-switchover", "desc": "To enable Link Aggregation Control Protocol (LACP) 1:1 link redundancy, use the lacp fast-switchover command in interface configuration mode. To dis able LACP 1:1 link redundancy, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lacp max-bundle", "cmd": "Router(config)# interface port-channel 2\nRouter(config-if)# lacp max-bundle 3\nRouter(config-if)#", "desc": "To define the maximum number of active bundled Link Aggregation Control Protocol (LACP) ports allowed in a port channel, use the lacp max-bundle command in interface configuration mode. To return to t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lacp port-priority", "cmd": "Device> enable\nDevice# configure terminal\nDevice(config)# interface ethernet0/0\nDevice(config-if)# lacp port-priority 23700\nDevice(config-if)#", "desc": "To set the priority for a physical interface, use the lacp port-priority command in interface configuration mode. To return to the default setting, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lacp rate", "cmd": "Router(config)# interface ethernet 0/1\nRouter(config-if)# lacp rate fast", "desc": "To set the rate at which Link Aggregation Control Protocol (LACP) control packets are ingressed to an" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lacp system-priority", "cmd": "Router> enable\nRouter# configure terminal\nRouter(config)# lacp system-priority 25500", "desc": "To set the priority for a system, use the lacp system-priority command in global configuration mode. To return to the default setting, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lbo", "cmd": "Router(config)# interface atm 1/2\nRouter(config-if)# lbo long gain36 -7.5db", "desc": "To set a cable length longer than 655 feet for a DS-1 link, use thelbocommand in interface configuration mode on the interface for a T1 link. To delete the lbovalue, use the no form of this command. l" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lex burned-in-address", "cmd": "Router(config)# interface serial 4\nRouter(config-if)# encapsulation ppp\nRouter(config)# interface lex 0\nRouter(config-if)# lex burned-in-address 0000.0c00.0001", "desc": "To set the burned-in MAC address for a LAN Extender interface, use the lexburned-in-address command in interface configuration mode. To clear the burned-in MAC address, use the no form of this command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lex input-address-list", "cmd": "Router(config-if)# access-list 710 deny 0800.0214.2776\nRouter(config)# interface lex 0\nRouter(config-if)# lex input-address-list 710", "desc": "To assign an access list that filters on MAC addresses, use the lexinput-address-list command in interface configuration mode. To remove an access list from the interface, use the no form of this comm" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lex input-type-list", "cmd": "Router(config-if)# access-list 220 deny 0x809B 0x0000\nRouter(config)# interface lex 0\nRouter(config-if)# lex input-type-list 220", "desc": "To assign an access list that filters Ethernet packets by type code, use the lexinput-type-list command in interface configuration mode. To remove an access list from an interface, use the no form of " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lex priority-group", "cmd": "lex priority-group\nlex priority-group group\nno lex priority-group", "desc": "To activate priority output queueing on the LAN Extender, use the lexpriority-group command in interface configuration mode. To disable priority output queueing, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "protocol", "cmd": "Router(config-if)# priority-list 5 protocol bridge medium list 701\nRouter(config-if)# lex interface 0\nRouter(config-if)# lex priority-group 5", "desc": "Interfaces — protocol" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lex retry-count", "cmd": "Router(config-if)# lex interface 0\nRouter(config-if)# lex retry-count 20", "desc": "To define the number of times to resend commands to the LAN Extender chassis, use the lexretry-count command in interface configuration mode. To return to the default value, use the no form of this co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "lex timeout", "cmd": "Router(config-if)# lex interface 0\nRouter(config-if)# lex timeout 4000", "desc": "To define the amount of time to wait for a response from the LAN Extender, use the lextimeout command in interface configuration mode. To return to the default time, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "license feature gnss", "cmd": "Router# configure terminal\nRouter(config)# license feature gnss", "desc": "To configure the license for the global navigation satellite system (GNSS) module on the Cisco ASR 920 routers, use the license feature gnss command in the global configuration mode. To remove the lic" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "linecard-group y-cable", "cmd": "Router(config)# redundancy\nRouter(config-red)# linecard-group 1 y-cable", "desc": "To create a line card group for one-to-one line card redundancy, use the linecard-group y-cable command in redundancy mode. To remove the line card redundancy group, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "linecode", "cmd": "Router(config-controller)# linecode b8zs", "desc": "To select the line-code type for T1 or E1 lines, use the linecode command in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "line-mode", "cmd": "Router(config)# controller dsl 4/0\nRouter(config-controller)# line-mode\nRouter(config)# controller dsl 1/0\nRouter(config-controller)# line-mode auto\nRouter(config-controller)# line-term cpe", "desc": "To configure the mode of the controller for the Symmetrical High-Speed Digital Subscriber Line (SHDSL) port, use the line-mode command in controller configuration mode. To return to the default two-wi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "line-mode bonding", "cmd": "Router(config-controller)# line-mode bonding\nRouter(config-controller)# no line-mode bonding", "desc": "To enable bonding mode on a CPE, use the line-mode bonding command in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "line-mode single-wire line", "cmd": "Router(config-controller)# line-mode single-wire line 1 profile 30a", "desc": "To enable single-wire (nonbonding) mode on a selected line, use the line-mode single-wire line command in controller configuration mode. To disable the mode, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "line-rate", "cmd": "Router(config)# controller dsl 1/0\nRouter(config-controller)# line-mode\nRouter(config-controller)#\nRouter(config-controller)# line-rate\nRouter(config-controller)#\nRouter(config-controller)# exit", "desc": "To specify a line rate for the DSL controller, use the line-rate command in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "line-term", "cmd": "Router(config)# controller dsl 1/0\nRouter(config-controller)# line-term\nRouter(config-controller)# line-mode", "desc": "To specify a termination for a line, use the line-term command in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "line-termination", "cmd": "Router# configure terminal\nRouter(config)# controller e1 6/0/0\nRouter(config-controller)# line-termination 75-ohm\nRouter(config-controller)# end", "desc": "To set the line termination on an E1 controller, use the line-terminationcommand in controller configuration mode. To return to the default line termination, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "link debounce", "cmd": "Router(config-if)# link debounce time 100\nRouter(config-if)#", "desc": "To enable the debounce timer on an interface, use the linkdebounce command in interface configuration mode. To disable the timer, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "link state group", "cmd": "Router# configure terminal\nRouter(config)# link state track 1\nRouter(config)# interface gigabitethernet3/1\nRouter(config-if)# link state group 1 upstream\nRouter(config-if)# interface gigabitethernet3/3\nRouter(config-if)# link state group 1 upstream\nRouter(config-if)# interface gigabitethernet3/5\nRouter(config-if)# link state group 1 downstream\nRouter(config-if)# interface gigabitethernet3/7\nRouter(config-if)# link state group 1 downstream", "desc": "To configure the link state group, use the linkstategroup command in interface configuration mode. link state group [number] {upstream | downstream}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "link state track", "cmd": "Router# configure terminal\nRouter(config)# link state track 1", "desc": "To configure a link state tracking number, use the linkstatetrack command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "li-slot rp rate", "cmd": "router# configure terminal\nrouter(config)# li-slot rp rate 5000", "desc": "To apply the user specified Packets Per Second (PPS) value when an Lawful Intercept (LI) is provisioned in" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "load-balancing", "cmd": "Router(config)# interface port-channel 1\nRouter(config-if)# load-balancing vlan", "desc": "To apply a load-balancing method to a Gigabit EtherChannel (GEC) interface, use the load-balancing command in interface configuration mode. To reset to the default, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "load-interval", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# load-interval 30\nRouter(config)# interface serial 1/1\nRouter(config-if)# frame-relay interface-dlci 100\nRouter(config-fr-dlci)# load-interval 60\nDevice# configure terminal\nDevice(config)# template user-template1\nDevice(config-template)# load-interval 60\nDevice(config-template)# end", "desc": "To change the length of time for which data is used to compute load statistics, use the load-interval command in interface configuration, Frame Relay DLCI configuration, or template configuration mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "local ip address", "cmd": "Router(config-cem-xconnect)# local ip address 10.0.5.1", "desc": "To define an IP address to identify a local circuit emulation (CEM) channel, use the localipaddresscommand in CEM xconnect configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "local-priority", "cmd": "Router# configure terminal\nRouter(config)# ptp clock ordinary domain 24\nRouter(config-ptp-clk)# local-priority 1", "desc": "To set the PTP clock's local priority." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "local udp port", "cmd": "Router(config-cem-xconnect)# local udp port 2141", "desc": "To define the User Datagram Protocol (UDP) port of the local endpoint of a circuit emulation (CEM) connection, use the localudpportcommand in CEM xconnect configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "local-lnm", "cmd": "Router(config-if)# local-lnm", "desc": "To enable Lanoptics Hub Networking Management of a PCbus Token Ring interface, use the local-lnm command in interface configuration mode. To disable Lanoptics Hub Networking Management, use the no for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "logging event", "cmd": "Router(config-if)# logging event subif-link-status", "desc": "To enable notification of interface, subinterface, and Frame Relay data link connection identifier (DLCI) data link status changes, use the loggingevent command in interface configuration mode. To dis" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "logging source-interface", "cmd": "Router(config)# logging source-interface ethernet 0\nRouter(config)# logging source-interface ethernet 2/1\nRouter# show running interface loopback49\nRouter# show running | includes logging", "desc": "To specify the source IPv4 or IPv6 address of system logging packets, use the loggingsource-interface command in global configuration mode . To remove the source designation, use the no form of this c" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "logging event link-status (global configuration)", "cmd": "Router(config)# logging event link-status default\nRouter(config)#\nRouter(config)# logging event link-status boot\nRouter(config)#\nRouter(config)# no logging event link-status default\nRouter(config)#\nRouter(config)# no logging event link-status boot\nRouter(config)#", "desc": "To change the default or set the link-status event messaging during system initialization, use the logging event link-status command in global configuration mode. To disable the link-status event mess" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "logging event link-status (interface configuration)", "cmd": "Router(config-if)# logging event link-status\nRouter(config-if)# no logging event link-status", "desc": "To enable link-status event messaging on an interface, use the logging event link-status command in interface configuration mode. To disable link-status event messaging, use the no form of this comman" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "logging event subif-link-status", "cmd": "Router(config-if)# logging event subif-link-status\nRouter(config-if)#\nRouter(config-if)# no logging event subif-link-status\nRouter(config-if)#", "desc": "To enable the link-status event messaging on a subinterface, use the logging event subif-link-status command in interface configuration mode. To disable the link-status event messaging on a subinterfa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "logging-events", "cmd": "Router(config-controller)# logging-events detail", "desc": "to print typical T3 controller Up and Down messages on a Channelized T3 Port Adapter,use the mode.UsethenoformofthiscommandtodisableprintingoftheT3controllerUpandDownmessages." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "logging-events (T1-E1 controller)", "cmd": "Router(config)#contr e1 2/1/0\nRouter(config-controller)# logging-events", "desc": "To show the controller state change and alarms on a controller, use the logging-eventscommand in controller configuration mode. To turn off controller state change reporting, use the no form of the co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback (CEM)", "cmd": "Router(config-controller)# loopback network\nRouter(config-controller)# loopback local payload\nRouter(config-cem)# loopback network\nRouter(config-controller)# loopback diag\nRouter(config-controller)# loopback local line", "desc": "To set the loopback method for testing a T1, E1, serial CEM interface, and VCoP Smart SFP, use the loopback command in controller configuration or CEM configuration mode. To remove any existing loopba" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback (DSL controller)", "cmd": "Router(config-controller)# loopback\nRouter(config-controller)# loopback\nRouter(config-controller)# loopback digital\nRouter(config-controller)# shutdown\nRouter(config-controller)#\nRouter(config-controller)#\nRouter(config-controller)# loopback digital\nRouter(config-controller)# no shutdown\nRouter(config-controller)#end\nRouter# show controllers dsl 0/0", "desc": "To test the controller and configure the core loopback, use the loopback(DSLController)command in controller configuration mode. To remove the loopback interface, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback (E3 controller)", "cmd": "Router(config)# controller e3 1/0\nRouter(config-controller)# loopback local", "desc": "To loop an entire E3 line toward the line and back toward the router, use the loopbackcommand in controller configuration mode. To remove the loop, use the no form of this command. loopback {local | n" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback (interface)", "cmd": "Router(config)# interface ethernet 4\nRouter(config-if)# loopback", "desc": "To diagnose equipment malfunctions between the interface and device, use the loopbackcommand in interface configuration mode. To disable the test, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback (J1 controller )", "cmd": "Router(config)# controller j1 3/0\nRouter(config-controller)# loopback line", "desc": "To set the loopback method for testing the J1 interface, use the loopback command in controller configuration mode. To turn off loopback, use the no form of this command. This command should be used f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback (PA-MC-8TE1+ port adapter)", "cmd": "Router(config)# interface 2/0\nRouter(config-if)# loopback line", "desc": "To enable loopback testing of data for the PA-MC-8TE1+ port adapter, use the loopback command in interface configuration mode. To disable loopback testing, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback (T1 interface)", "cmd": "Router#\nRouter(config)# controllers t3 0/0/0\nRouter(config-controller)# no t1 2 yellow generation\nRouter(config-controller)# Ctrl-D\nRouter# show controllers t3 0/0/0:2\nRouter(config)# interface serial 3/0/0:5\nRouter(config-if)# loopback local", "desc": "To loop individual T1 channels on the CT3IP in Cisco 7000 series routers that have the RSP7000 and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback (T3/E3 controller)", "cmd": "Router(config)# controller t3/e3 3/0/0\nRouter(config-controller)# loopback local", "desc": "To loop the entire T3 (all 28 T1 channels) line on the T3 controller or E3 (all 16 E1 channels) in Cisco NCS 4200 Series or on the CT3IP in Cisco 7500 series routers, use the loopback command in contr" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback (T3-E3 interface)", "cmd": "Router(config)# interface serial 3/0/0\nRouter(config-if)# loopback local\nRouter# configure terminal\nRouter(config)# interface serial 5/0/0\nRouter(config-if)# loopback dte", "desc": "To loopback at various points in the transmit and receive path, use the loopbackcommand in interface configuration mode. To stop the loopback, use the no form of this command. loopback {dte | local | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback applique", "cmd": "Router(config)# interface serial 1\nRouter(config-if)# loopback applique", "desc": "To configure an internal loop on the High-Speed Serial Interface (HSSI) applique, use the loopbackapplique command in interface configuration mode. To remove the loop, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback dte", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# loopback dte", "desc": "To loop packets back to the DTE from the CSU/DSU, when the device supports this function, use the loopbackdtecommand in interface configuration mode. To remove the loop, use the no form of this comman" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback line", "cmd": "Router(config)# interface serial 1\nRouter(config-if)# loopback line", "desc": "To loop packets completely through the CSU/DSU to configure the CSU loop, use the loopbackline command in interface configuration mode. To remove the loop, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback remote (interface)", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# loopback remote\nRouter(config)# interface serial 0\nRouter(config-if)# loopback remote full qrw\nRouter(config-if)#\nRouter(config-if)# loopback remote stress-pattern 1\nRouter(config-if)#", "desc": "To loop packets through a CSU/DSU, over a DS3 link or a channelized T1 link, to the remote CSU/DSU and back, use the loopbackremotecommand in interface configuration mode. To remove the loopback, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback remote (T1/T3/SDH/SONET Controller)", "cmd": "Router(config)# controller t1 0/0/1\nRouter(config-controller)#loopback remote iboc fac1\nRouter(config)# controller t3 0/0/1\nRouter(config-controller)#loopback remote line\nRouter(config)# controller sonet 0/0/1\nRouter(config-controller)#sts 1\nRouter(config-ctrlr-sts1)#mode t3\nRouter(config-ctrlr-sts1)#t3 loopback remote payload\nRouter(config)#controller sdh 0/4/7\nRouter(config-controller)#au-4 1", "desc": "To put the far-end T1 or T3 interfaces into a loopback use the loopback remote command in the global configuration mode.The remote loopback setting loops back the far-end at line or payload, using inb" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "loopback (SONET)", "cmd": "loopback (SONET)", "desc": "To set the loopback method for testing an interface, use the loopback command in the controller configuration mode. To reset to the default, use the no form of this command. loopback [local | network " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mac-address-table learning", "cmd": "Router(config)# mac-address-table learning vlan 100\nRouter(config)#\nRouter(config)# mac-address-table learning vlan 100 module 4\nRouter(config)#\nRouter(config)# no mac-address-table learning vlan 100\nRouter(config)#\nRouter(config)# mac-address-table learning vlan 100\nRouter(config)#\nRouter(config)# mac-address-table learning interface FastEthernet 3/48 module 4\nRouter(config)#", "desc": "To enable MAC-address learning, use the mac-address-tablelearningcommand in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mac-address (virtual switch)", "cmd": "Router(config)# switch virtual domain test-mac-address\nRouter(config-vs-domain)# mac-address 0000.0000.0000\nRouter(config-vs-domain)#\nRouter(config)# switch virtual domain test-mac-address\nRouter(config-vs-domain)# mac-address use-virtual\nRouter(config-vs-domain)#", "desc": "To specify a Media Access Control (MAC) address to use as the common router MAC address for interfaces on the active and standby chassis, use the mac-address virtual switch configuration submode comma" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mac-address-table secure", "cmd": "Router(config)#\nRouter(config)#\nRouter(config)#\nRouter(config)# mac-address-table secure 00c0.00a0.03fa fa1/1 vlan 6\nSwitch(config)# mac-address-table secure 00c0.00a0.03fa fa1/1 vlan 6\nSwitch(config)# mac-address-table secure 00c0.00a0.03fa atm 2/1", "desc": "To add secure addresses to the MAC address table, use the mac-address-tablesecure command in global configuration mode. To remove secure entries from the MAC address table, use the no form of this com" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "main-fiber port", "cmd": "Router(config)# controller sonet 1/0\nRouter(config-controller)# main-fiber port 1", "desc": "To specify the port number to use for the optical link connection on the SDH/STM-1 trunk card on a Cisco" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "max-reserved-bandwidth", "cmd": "Router# show policy-map policy1\nRouter# show policy-map interface e1/1", "desc": "To change the percent of interface bandwidth allocated for Resource Reservation Protocol (RSVP), class-based weighted fair queueing (CBWFQ), low latency queueing (LLQ), IP RTP Priority, Frame Relay IP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mdix auto", "cmd": "Router(config-if)# mdix auto", "desc": "To enable automatic media-dependent interface with crossover detection, use the mdixauto command in interface configuration mode. To turn automatic detection off, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mdl", "cmd": "Router(config)# controller t3 1/0\nRouter(config-controller)# clock source line\nRouter(config-controller)# mdl string eic ID\nRouter(config-controller)# mdl string fic Building B\nRouter(config-controller)# mdl string unit ABC\nRouter(config-controller)# mdl string pfi Facility Z\nRouter(config-controller)# mdl string port Port 7\nRouter(config-controller)# mdl transmit path\nRouter(config-controller)# mdl transmit idle-signal", "desc": "To configure the Maintenance Data Link (MDL) message defined in the ANSI T1.107a-1990 specification, use the mdl command in controller configuration mode. To remove the message, use the no form of thi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "media-type", "cmd": "Router(config)# interface ethernet 1\nRouter(config-if)# media-type 10baset\nRouter(config)# interface fastethernet 0/1\nRouter(config-if)# media-type mii\nRouter(config)# interface fastethernet 0/1/1\nRouter(config-if)# media-type mii", "desc": "To specify the physical connection on an interface, use the media-type command in interface configuration mode. To restore the default value, use the no form of this command. media-type {aui | 10baset" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "media-type auto-failover", "cmd": "Router(config-if)# media-type rj45 auto-failover\nRouter(config-if)# media-type sfp auto-failover\nRouter(config-if)# no media-type", "desc": "To assign primary and secondary failover media on the GE-SFP port enter the media-typeauto-failover command in interface configuration mode. To automatically detect which media is connected, use the n" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "member subslot", "cmd": "Router(config)# redundancy\nRouter(config-red)# linecard-group 1 y-cable\nRouter(config-red-lc)# member subslot 2/1 primary\nRouter(config-red-lc)# member subslot 2/0 secondary\nRouter# configure terminal\nRouter(config)# redundancy\nRouter(config-red)# linecard-group 1 cable\nRouter(config-red-lc)# member subslot 5/1 protect rf-power hccp-delta 3\nRouter# configure terminal\nRouter(config)# redundancy", "desc": "To configure the redundancy role of a line card, use the member subslot command in line card redundancy group mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "microcode reload controller", "cmd": "Router# microcode reload controller j1 3/0\nRouter#", "desc": "To reload the firmware and field programmable gate array (FPGA) without reloading the Cisco IOS image, use the microcode reload controller command in privileged EXEC mode. microcode reload controller " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mls ip delete-threshold", "cmd": "Router(config)# mls ip delete-threshold 223\nRouter(config)#", "desc": "To delete the configured access control list (ACL) thresholds, use the mlsipdelete-threshold comman d in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mls ip directed-broadcast", "cmd": "Router(config-if)#\nRouter(config-if)#\nRouter(config-if)#\nRouter(config-if)#", "desc": "To enable the hardware switching of the IP-directed broadcasts, use the mlsipdirected-broadcast command in interface configuration mode. To return to the default settings, use the no form of this comm" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mls ipx", "cmd": "Router(config-if)#\nRouter(config-if)#", "desc": "To enable Multilayer Switching (MLS) Internetwork Packet Exchange (IPX) on the interface, use the mlsipxcommand in interface configuration mode. To disable IPX on the interface, use the no form of thi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mobility", "cmd": "Router(config-if)# mobility network-id 200\nRouter(config-if)#\nRouter(config-if)# mobility trust\nRouter(config-if)#\nRouter(config-if)# mobility broadcast\nRouter(config-if)#\nRouter(config-if)# mobility tcp adjust-mss\nRouter(config-if)#", "desc": "To configure the wireless mGRE tunnels, use the mobility command in interface configuration mode. To return to the default settings, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode", "cmd": "Router(config)# redundancy\nRouter(config-red)# mode rpr-plus\nRouter(config)# redundancy\nRouter(config-red)# mode sso", "desc": "To set the redundancy mode, use the mode command in redundancy configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode (ATM T1 E1 controller)", "cmd": "Router(config)# controller\nRouter(config-controller)# mode atm\nRouter(config)# controller\nRouter(config-controller)# mode t1", "desc": "To set the DSL controller into ATM mode and create an ATM interface or to set the T1 or E1 controller into" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode (HSA redundancy)", "cmd": "Router(config)# redundancy\nRouter(config-r)# mode rpr-plus\nRouter(config-r)# end", "desc": "To configure the redundancy mode, use the modecommand in redundancy configuration mode. To configure the default redundancy mode, use the noform of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode (RSC redundancy)", "cmd": "Router(config)# redundancy\nRouter(config-r)#", "desc": "To choose between classic-split mode (maximum throughput with no load sharing) and handover-split mode (maximum availability with load sharing), use the mode command in redundancy configuration mode. " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode bypass", "cmd": "Router# enable\nRouter# configure terminal\nRouter(config)# interface vmi1\nRouter(config-if)# mode bypass", "desc": "To enable Virtual Multipoint Interfaces (VMI) to support multicast traffic, use the modebypass command in interface configuration mode. To return the interface to the default mode of aggregate, use th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode c-12", "cmd": "Router(config)# controller sonet 1/0/0\nRouter(config-controller)# aug mapping au-3\nRouter(config-controller)# au3 1\nRouter(config-ctrlr-au3)# mode c-12\nRouter(config)# controller sonet 1/0\nRouter(config-controller)# aug mapping au-4\nRouter(config-controller)# au-4 1 tug-3 1\nRouter(config-ctrlr-tug3)# mode c-12", "desc": "To configure the mode of an E1 line that has been mapped to a TUG-3, use the mode c-12 command in configuration controller tug3 mode.To configure the mode of an E1 line that has been mapped to a AU-3," }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode ct3", "cmd": "Router> enable\nRouter#configure terminal\nRouter(config)# controller MediaType 0/5/0\nRouter(config-ctr)# mode sonet\nRouter(config-ctr-sonet)# controller sonet 0/5/0\nRouter(config-ctr-sonet)# rate oc12\nRouter(config-ctr-sonet)# sts-1 1\nRouter(config-ctr-sonet)# mode ct3\nRouter(config-ctr-sonet)# t1 1 cem-group 100 unframed\nRouter(config-ctr-sonet)# t1 1 framing unframed", "desc": "Interfaces — mode ct3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode download", "cmd": "Router(sat-init-config)# no mode download", "desc": "To enable operational code download mode for the Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT), use the modedownloadcommand in satellite initial configuration mode. To disable operationa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode e3", "cmd": "mode e3\nmode e3", "desc": "Interfaces — mode e3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode sonet", "cmd": "mode sonet\nmode sonet", "desc": "Interfaces — mode sonet" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode sts-nc", "cmd": "mode sts-nc", "desc": "To configure the concatenated signals in the SONET network, use the mode sts-nc command. The concatenated signals are obtained by \"gluing\" together the payloads of the constituent signals, and they co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode t3/e3", "cmd": "Router(config-controller)# mode t3/e3", "desc": "To set the T3/E3 controller in T3/E3 mode and create a logical T3/E3 controller, use the mode command in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode two-way", "cmd": "Router(sat-init-config)# mode two-way\nRouter(sat-init-config)# no mode two-way", "desc": "To enable two-way operational mode for the Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT), use the modetwo-waycommand in satellite initial configuration mode. To revert to one-way operati" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode vc-1x", "cmd": "mode vc-1x\nmode vc-1x", "desc": "Interfaces — mode vc-1x" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode vc-4", "cmd": "mode vc-4\nmode vc-4", "desc": "Interfaces — mode vc-4" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode vc4-Nc", "cmd": "mode vc4-Nc\nmode vc4-Nc", "desc": "Interfaces — mode vc4-Nc" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode vt-15", "cmd": "Router(config)# controller sonet-acr 1\nRouter(config-controller)#\nRouter(config-ctrlr-sts1)# mode vt-15", "desc": "To configure the path operation mode, use the mode vt-15 command in controller configuration STS mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode t3", "cmd": "mode t3\nmode t3", "desc": "Interfaces — mode t3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mode tug-3", "cmd": "mode tug-3\nmode tug-3", "desc": "Interfaces — mode tug-3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "modem dtr-delay", "cmd": "Router(config)# line 7\nRouter(config-line)# modem dtr-delay 2", "desc": "To control the time that a data terminal ready (DTR) signal is held down when a line clears, use the modemdtr-delay command in line configuration mode. To restore the default hold down time, use the n" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "monitoring", "cmd": "Router# configure terminal\nRouter(config)# transceiver type all\nRouter(config-xcvr-type)# monitoring interval 1500\nRouter(config-xcvr-type)# no monitoring", "desc": "To enable monitoring of all optical transceivers and to specify the time period for monitoring the transceivers, use the monitoringcommand in transceiver type configuration mode. To disable the monito" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mop enabled", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# mop enabled", "desc": "To enable an interface to support the Maintenance Operation Protocol ( MOP), use the mopenabled command in interface configuration mode. To disable MOP on an interface, use the no form of this command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mop sysid", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# mop sysid", "desc": "To enable an interface to send out periodic Maintenance Operation Protocol (MOP) system identification messages, use the mopsysid command in interface configuration mode. To disable MOP message suppor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "mtu", "cmd": "Router(config)# interface serial 1\nRouter(config-if)# mtu 1000\nRouter(config)# interface GigabitEthernet3/0/0\nRouter(config-if)# mtu 1800", "desc": "To adjust the maximum packet size or maximum transmission unit (MTU) size, use the mtu command in interface configuration mode, connect configuration mode, or xconnect subinterface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "national bit (controller)", "cmd": "Router(config)# controller e3 1/0\nRouter(config-controller)# national bit 1", "desc": "To set the E3 national bit in the G.751 frame used by the E3 controller, use the national bit command in controller configuration mode. To return to the default E3 controller national bit, use the no " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "national bit (interface)", "cmd": "Router(config)# interface serial 1/0/0\nRouter(config-if)# national bit 1", "desc": "To set the E3 national bit in the G.751 frame used by the PA-E3 port adapter, use the nationalbitcommand in interface configuration mode. To return to the default E3 interface national bit, use the no" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "national reserve", "cmd": "Router(config)# interface atm 1/0\nRouter(config-if)# national reserve 011011", "desc": "To set the E1 national bit, use thenationalreservecommand in interface configuration mode. To return to the default E1 national bit, use theno form of this command. national reserve {0 | 1} {0 | 1} {0" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "negotiation", "cmd": "Router(config)# interface gigabitethernet 2/1/1\nRouter(config-if)# media-type gbic\nRouter(config-if)# negotiation auto\nRouter(config)# interface gigabitethernet 2/1/1\nRouter(config-if)# no negotiation auto", "desc": "To enable advertisement of speed, duplex mode, and flow control on a Gigabit Ethernet interface, use thenegotiationcommand in interface configuration mode. To disable automatic negotiation, use the no" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "neighbor (VPLS)", "cmd": "Device(config-vfi)# l2 vfi vfi-1 manual\nDevice(config-vfi)# vpn 1\nDevice(config-vfi)# neighbor 172.16.10.2 4 encapsulation mpls\nDevice(config-vfi)# l2 vfi vfi-1 manual\nDevice(config-vfi)# vpn 1\nDevice(config-vfi)# neighbor 172.16.10.2 4 encapsulation mpls no-split-horizon", "desc": "To specify the type of tunnel signaling and encapsulation mechanism for each Virtual Private LAN Service (VPLS) peer, use the neighbor command in L2 VFI manual configuration mode. To disable a split h" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "network-clock (BITS)", "cmd": "Router(config)# network-clock select 2 slot 1 ?\nRouter(config)# network-clock select 2 slot 1 bits 0 ?\nRouter(config)# network-clock select 3 ?\nRouter(config)# network-clock select 3 interface TenGigabitEthernet 1/1\nRouter(config)# network-clock slot 1 bits 0 ?\nRouter(config)# network-clock slot 1 bits 0 t1 ?\nRouter(config)# network-clock slot 1 bits 0 t1 d4 ?\nRouter(config)# network-clock slot 1 bits 0 j1 ?\nRouter(config)# network-clock slot 1 bits 0 e1 ?\nRouter(config)# network-clock slot 1 bits 0 2m ?", "desc": "To configure BITS port signaling types, use the network-clockcommand in global configuration mode. To disable the BITS port signaling types, use the no form of this command. network-clock slot slot bi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "network-clock clear lockout", "cmd": "ASR1000(config)# network-clock clear lockout external 0/0/0 t1 esf", "desc": "To clear the lock-out on a clock source, use the network-clock clear lockout command in the privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "network-clock hold-off global", "cmd": "Router(config)# network-clock hold-off 50 global", "desc": "To configure the hold-off time, use the network-clock hold-off global command in the global configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "network-clock input-source", "cmd": "network-clock input-source\nof this command\nno network-clock input-source priority controller t1/e1 slot/bay/port", "desc": "To assign a controller to be the primary or secondary clock source use the network-clock input-sourcepriority command. To set the controller to be a primary clock source, set the value of priority for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "network-clock set lockout", "cmd": "ASR1000(config)# network-clock set lockout external R0 t1 esf\nRouter(config)# network-clock set lockout interface GigabitEthernet 0/1", "desc": "To lock out a clock source, use the network-clock set lockout command in the privileged EXEC mode. On the Cisco ASR 901 Series Aggregation Services Routers, use the network-clock clear lockout command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "network-clock synchronization ssm option", "cmd": "Router> enable\nRouter# configure terminal\nRouter(config)# network-clock synchronization automatic\nRouter(config)# network-clock synchronization ssm option 2 GEN1", "desc": "To configure the equipment to work in a synchronization network, use the network-clock synchronization ssm option command in the global configuration mode. To unconfigure the network-clock synchroniza" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "network-clock synchronization automatic", "cmd": "Router(config)# network-clock synchronization automatic", "desc": "To enable the network clock synchronization selection process, use the network-clock synchronization automatic command in the global configuration mode. To disable the network clock synchronization se" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "network-clock synchronization mode QL-enabled", "cmd": "Router(config)# network-clock synchronization mode QL-enabled", "desc": "To configure the automatic selection process for the QL-enabled mode, use the network-clock synchronization mode QL-enabled command in the global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "network-clock quality-level", "cmd": "ASR1000(config)# network-clock quality-level tx QL-ST2 external R0 t1 sf", "desc": "To configure the Quality Level (QL) value for the Synchronization Status Messages (SSM) on a BITS port, use the network-clock quality-level command in the global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "no channelized", "cmd": "no channelized\nchannelized\nno channelized", "desc": "To configure the T3 controller for unchannelized mode, use thenochannelizedconfiguration controller command. To configure channelized mode, use the channelizedform of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "nrzi-encoding", "cmd": "Router(config)# interface serial 1\nRouter(config-if)# nrzi-encoding\nRouter(config)# interface serial 3/1/0\nRouter(config-if)# nrzi-encoding mark", "desc": "To enable nonreturn-to-zero inverted (NRZI) line-coding format, use the nrzi-encodingcommand in interface configuration mode. To disable this capability, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "outbound data-pid", "cmd": "Router(sat-init-config)# outbound data-pid 3000", "desc": "Interfaces — outbound data-pid" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "outbound data-rate", "cmd": "Router(sat-init-config)# outbound data-rate 450000", "desc": "To specify the VSAT data rate, use the outbounddata-rate command in satellite initial configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "outbound frequency", "cmd": "Router(sat-init-config)# outbound frequency 950000", "desc": "To specify the VSAT outbound frequency, use the outboundfrequency command in satellite initial configuration mode. To remove the outbound frequency configuration, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "outbound id", "cmd": "Router(sat-init-config)# outbound id 95", "desc": "To specify the VSAT outbound ID, use the outboundidcommand in satellite initial configuration mode. To remove the outbound ID configuration, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "outbound modulation-type", "cmd": "Router(sat-init-config)# outbound modulation-type DVB", "desc": "To specify the VSAT modulation type, use the outboundmodulation-type command in satellite initial configuration mode. To remove the VSAT modulation type configuration, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "outbound sync ip address", "cmd": "Router(sat-init-config)# outbound sync ip address 10.2.2.2", "desc": "To specify the outbound synchronization IP address, use the outboundsyncipaddress command in satellite initial configuration mode. To remove the outbound synchronization IP address configuration, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "outbound viterbi-rate", "cmd": "Router(sat-init-config)# outbound viterbi-rate 3/4(2.6)", "desc": "To specify the VSAT Viterbi code rate, use the outboundviterbi-rate command in satellite initial configuration mode. To return to the default rate, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "overhead c2", "cmd": "overhead c2\noverhead c2 value\nno overhead c2 value", "desc": "To set the SONET path overhead bytes in the frame header to a specific standards requirement or to ensure interoperability with equipment from another vendor, use the overhead command in SONET path co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "overhead j0", "cmd": "Router(config)# controller sonet 2/0\nRouter(config-controller)# overhead j0 transmit 22\nRouter(config-controller)# overhead j0 receive 34\nRouter(config-controller)# overhead j0 transmit 82", "desc": "To specify the Regenerator Section (RS) Trace identifier (J0), use the overheadj0 command in controller configuration mode. To restore the default value, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "overhead j1", "cmd": "Router(config-controller)# au-4 1\nRouter(config-ctrlr-au4)# overhead j1 length 16 transmit-message metro_SF\nRouter(config)# controller sonet 4/0Router(config-controller)# au-3 3\nRouter(config-ctrlr-au3)# overhead j1 length 16 receive-message metro_L\nRouter(config)# controller sonet 4/0\nRouter(config-controller)# sts-1 3\nRouter(config-ctrlr-sts1)# overhead j1 length 64 transmit-message metro_washington\nRouter(config)# controller sonet 2/0\nRouter(config-controller)# overhead j1 length 2 transmit-message 22\nRouter(config-controller)# overhead j1 length 2 receive-message 34", "desc": "To configure the message length and the message text of the High Order Path Trace identifier (J1), use the overheadj1 command in controller configuration or path configuration mode. To restore the def" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "overhead tunnel", "cmd": "router(config)#controller sonet 0/7/7\nrouter(config-controller)#overhead tunnel SDCC cem-group100 unframed\nrouter(config-controller)#end\nrouter(config)#interface cem 0/7/7\nrouter(config-if)#cem 100\nrouter(config-if)#xconnect 203.0.113.1 130 encapsulation MPLS\nrouter(config-controller)#end", "desc": "To configure a transparent overhead tunnel on SDH or SONET controller, use the overhead tunnel command in the controller mode. To remove the tunnel from SDH or SONET controller, use the no form of thi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "overhead s1s0", "cmd": "overhead s1s0\noverhead s1s0 value\nno overhead s1s0 value", "desc": "To set the SONET path overhead bytes in the frame header to a specific standards requirement or to ensure interoperability with equipment from another vendor, use the overhead command in SONET path co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "password (satellite initial configuration)", "cmd": "Router(sat-init-config)# password vsatuser", "desc": "To define or to change the password of the NM-1VSAT-GILAT network module required to enter satellite initial configuration mode, use the password command in the satellite initial configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "payload-compression", "cmd": "Router(config-cem)# payload-compression", "desc": "To enable payload compression, use the payload-compressioncommand in CEM configuration mode. To disable payload compression, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "payload-size dejitter-buffer", "cmd": "Router(config-controller)# payload-size 1024 dejitter-buffer 10", "desc": "To configure the size of payload and dejitter-buffer of a circuit emulation (CEM) over MPLS, use the payload-size dejitter-buffer command in CEM configuration mode. To restore the default the size, us" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "payload-size", "cmd": "Router(config-cem)# payload-size 224", "desc": "To configure the payload size of a circuit emulation (CEM) over IP (CEoIP) packet, use the payload-sizecommand in CEM configuration mode. To restore the default payload size, use the no form of this c" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "payload-compression Enables payload compression.", "cmd": "payload-compression Enables payload compression.\npayload-size\nphysical-interface", "desc": "Interfaces — payload-compression Enables payload compression." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "physical-interface", "cmd": "Router(config)# interface vmi1\nRouter(config-if)# physical-interface FastEthernet0/1", "desc": "To create a physical subinterface and to associate it with the Virtual Multipoint Interface (VMI) on a router, use the physical-interface command in interface configuration mode. To return to the defa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "physical-layer", "cmd": "Router(config)# interface serial 2\nRouter(config-if)# physical-layer async", "desc": "To specify the mode of a slow-speed serial interface on a router as either synchronous or asynchronous, use the physical-layer command in interface configuration mode. To return the interface to the d" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "platform console", "cmd": "Router> enable\nRouter# configure terminal\nRouter(config)# platform console virtual\nRouter(config)# end\nRouter# copy system:running-config nvram:startup-config\nRouter# reload\nRouter> enable\nRouter# configure terminal\nRouter(config)# platform console serial\nRouter(config)# end", "desc": "To select the console that is used to access the virtual router interface, use the platform console command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "platform enable controller mediaType", "cmd": "platform enable controller mediaType\nbay Bay of the interface\nport Mediatype port number", "desc": "Interfaces — platform enable controller mediaType" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "platform hardware throughput crypto", "cmd": "Device# show platform hardware throughput crypto\nDevice# show license authorization\nDevice# configure terminal\nDevice(config)# platform hardware throughput crypto ?\nDevice(config)# platform hardware throughput crypto T2\nDevice# exit\nDevice# copy running-config startup-config\nDevice# reload\nDevice# show platform hardware throughput crypto", "desc": "To configure a throughput value on a physical router, use the platform hardware throughput crypto command in global configuration mode. To revert to the default value, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "platform hardware throughput level", "cmd": "Router(config)# platform hardware throughput level MB 500\nRouter(config)# no platform hardware throughput level", "desc": "To change the maximum throughput level on the virtual router, use the platform hardware throughput level command in global configuration mode. To return the platform throughput level to the default va" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "platform ip features sequential", "cmd": "Router(config-if)# platform ip features sequential\nRouter(config-if)#\nRouter(config-if)# no platform ip features sequential\nRouter(config-if)#", "desc": "To enable Internet Protocol (IP) precedence-based or differentiated services code point (DSCP)-based egress quality of service (QoS) filtering to use any IP precedence or DSCP policing or marking chan" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "platform punt-keepalive", "cmd": "Device(config)# platform punt-keepalive disable-kernel-core", "desc": "To enable the Punt-Keepalive feature and monitor the status of the punt path between the forwarding processor (FP) and the route processor (RP), use the platform punt-keepalive command in the global c" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "platform punt-arp-unicast cpu-queue-host", "cmd": "platform punt-arp-unicast cpu-queue-host", "desc": "To punt ARP unicast packets through the Routing protocol queue, when packets are forwarded between the forwarding processor (FP) and the route processor (RP), use the platform punt-arp-unicast cpu-que" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "platform scp retry interval", "cmd": "Router(config)# platform scp retry interval 600\nRouter(config)#", "desc": "To enable Switch-Module Configuration Protocol (SCP) fast retry and set the fast-retry interval, use the platformscpretryinterval command in global configuration mode. To disable SCP fast retry, use t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "platform smart-sfp", "cmd": "Router(config)# configure terminal\nRouter(config)# platform smart-sfp interface GigabitEthernet 0/0/8 type OC-3\nRouter(config)# configure terminal\nRouter(config)# platform smart-sfp interface TenGig 0/0/8 type OC-3\nRouter(config)# configure terminal\nRouter(config)# platform smart-sfp interface GigabitEthernet 0/0/8 type OC-12\nRouter(config)# configure terminal\nRouter(config)# platform smart-sfp interface TenGig 0/0/8 type OC-12\nRouter(config)# configure terminal\nRouter(config)# platform smart-sfp interface GigabitEthernet 0/0/8 type ds3", "desc": "To configure the Gigabit Ethernet or TenGig Ethernet as VCoP smart SFP on OC3 or OC12 or DS3 mode, use the platform smart-sfp interface command in SONET/PDH configuration mode. To remove the VCoP smar" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "platform time-source", "cmd": "Router(config)# platform trace boottime slot R0 bay 1 process forwarding-manager", "desc": "To initiate Time of Day (ToD) synchronization on a line card, use the platformtime-source command in global configuration mode. To disable the platform time-source, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pm fec threshold", "cmd": "Router(config)# controller dwdm 0/0\nRouter(config-controller)# pm 15-min fec threshold uc-words 900 enable", "desc": "To configure performance monitoring thresholds on the FEC layer, use the pmfecthresholdcommand in" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pm optics report", "cmd": "Router(config)# controller dwdm 0/0\nRouter(config-controller)# pm 15-min optics report opt max-tca enable", "desc": "To enable threshold crossing alert (TCA) generation on the optics layer, use the pmopticsreportcommand in DWDM configuration mode. To disable TCA reporting, use the no form of this command. pm {15-min" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pm otn report", "cmd": "Router(config)# controller dwdm 0/0\nRouter(config-controller)# pm 15-min otn report esr-pm-fe enable", "desc": "To enable threshold crossing alert (TCA) generation on the optical transport network (OTN) layer, use the pmotnreportcommand in DWDM configuration mode. To disable TCA reporting, use the no form of th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pm otn threshold", "cmd": "Router(config)# controller dwdm 0/0\nRouter(config-controller)# pm 15-min otn threshold esr-pm-ne 800", "desc": "To configure performance monitoring thresholds on the optical transport network (OTN) layer, use the pmotnthresholdcommand in DWDM configuration mode. To disable TCA reporting, use the no form of this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "port (interface)", "cmd": "Router(config)# interface tokenring 3/0/0\nRouter(config-if)# port", "desc": "To enable an interface on a PA-4R-DTR port adapter to operate as a concentrator port, use the portcommand in interface configuration mode. To restore the default station mode, use the no form of this " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "port access-map", "cmd": "Router(config)# port access-map ted\nRouter(config-port-map)#", "desc": "To create a port access map or enter port access-map command mode, use the portaccess-map command in global configuration mode. To remove a mapping sequence or the entire map, use the no form of this " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "port-channel hash-distribution", "cmd": "Router(config)# port-channel hash-distribution adaptive", "desc": "To set the hash distribution algorithm method, use the port-channel hash-distribution command in global configuration mode. To return to the default settings, use the no or default form of this comman" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "port-channel load-balance", "cmd": "Router(config)#\nRouter(config)#\nRouter(config)#", "desc": "To set the load distribution method among the ports in a bundle, use the port-channelload-balance command in global configuration mode. To reset the load distribution to the default settings, use the " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "port-channel load-balance (interface)", "cmd": "Router(config)# interface port-channel1\nRouter(config-if)# port-channel load-balance weighted link all", "desc": "To configure a member link for load balancing, a default service instance weight, or weighted load balancing on port-channel member links, use the port-channel load-balance command in interface config" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "port-channel load-balance weighted rebalance", "cmd": "Router# port-channel load-balance weighted rebalance", "desc": "To perform a rebalancing of all port-channel interfaces configured with weighted load balancing, use the port-channel load-balance weighted rebalance command in privileged EXEC mode. port-channel load" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "port-channel load-balancing vlan-manual", "cmd": "Router(config)# port-channel", "desc": "To apply the VLAN-manual load-balancing method globally to all Gigabit EtherChannel (GEC) interfaces, use the port-channelload-balancingvlan-manualcommand in global configuration mode. To reset to the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "port-channel load-defer", "cmd": "Router(config)#\nRouter(config)#\nRouter# show etherchannel 50 port-channel\nRouter#", "desc": "To configure the port load share deferral interval for all port channels, use the port-channelload-defer command in global configuration mode. To reset the port defer interval to the default setting, " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "port-channel per-module load-balance", "cmd": "Router(config)# port-channel per-module load-balance", "desc": "To enable load balance on a per-module basis among the ports in a bundle, use the port-channel per-module load-balance command in global configuration mode. To return to the default settings, use the " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "port-channel port load-defer", "cmd": "Router(config)#\nRouter(config-if)#\nRouter(config-if)#\nRouter# show etherchannel 50 port-channel\nRouter#", "desc": "To enable the temporary deferral of port load sharing during the connection or reconnection of a port channel, use the port-channelportload-defer command in interface configuration mode. To disable th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "port-channel standalone-disable", "cmd": "Device(config-if)# port-channel standalone-disable", "desc": "To disable the EtherChannel standalone option in a port channel, use the port-channel standalone-disable command in interface configuration mode. To enable this option, use the no form of this command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pos ais-shut", "cmd": "Router(config)# interface pos 3/0\nRouter(config-if)# shutdown\nRouter(config-if)# pos ais-shut", "desc": "To send the line alarm indication signal (LAIS) when the Packet-over-SONET (POS) interface is placed in any administrative shutdown state, use the pos ais-shut command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pos delay triggers", "cmd": "Router# configure terminal\nRouter(config)# interface pos 1/0\nRouter(config-if)# pos delay triggers line 50\nRouter# configure terminal\nRouter(config)# interface pos 1/0\nRouter(config-if)# pos delay triggers path 110\nRouter# show controllers pos 4/0 detail", "desc": "To enable a POS alarm trigger delay, or to enable path level alarms as triggers to bring the POS line card protocol to down, use the pos delay triggers command in POS interface configuration mode. To " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pos flag", "cmd": "Router(config)# interface pos 9/0\nRouter(config-if)# pos flag c2 0x13\nRouter(config-if)# end", "desc": "To set the SONET overhead bytes in the frame header to meet a specific standards requirement or to ensure interoperability with the equipment of another vendor, use the posflagcommand in interface con" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pos flag s1-byte rx-communicate", "cmd": "pos flag s1-byte rx-communicate\npos flag s1-byte rx-communicate\nno pos flag s1-byte rx-communicate", "desc": "To direct the router to switch to internal clocking when it receives an S1 SONET overhead byte with a value of 0xF, use the pos flag s1-byte rx-communicate command in interface configuration mode. To " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pos flag s1-byte tx", "cmd": "pos flag s1-byte tx\npos flag s1-byte tx value", "desc": "To control the transmission of the S1 SONET overhead byte, use the pos flag s1-byte tx command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pos framing", "cmd": "Router(config)# interface pos 3/0\nRouter(config-if)# pos framing sdh\nRouter(config-if)# no shutdown", "desc": "To specify the framing used on the POS (Packet-over-SONET) interface, use the posframing command in interface configuration mode. To return to the default SONET STS-3c framing mode, use the no form of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pos report", "cmd": "Router(config)# interface pos 3/0/0\nRouter(config-if)# pos report sd-ber\nRouter(config-if)# pos report lais\nRouter(config-if)# end", "desc": "To permit selected SONET alarms to be logged to the console for a POS (Packet-over-SONET) interface, use the posreportcommand in interface configuration mode. To disable logging of select SONET alarms" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pos scramble-atm", "cmd": "Router(config)# interface pos 3/0\nRouter(config-if)# pos scramble-atm\nRouter(config-if)# no shutdown\nRouter(config-if)# end", "desc": "To enable SONET payload scrambling on a POS (Packet-over-SONET) interface, use the posscramble-atmcommand in interface configuration mode. To disable scrambling, use the no form of this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pos threshold", "cmd": "Router(config)# interface pos 3/0/0\nRouter(config-if)# pos threshold sd-ber 8\nRouter(config-if)# pos threshold sf-ber 4\nRouter(config-if)# pos threshold b1-tca 4\nRouter(config-if)# end", "desc": "To set the bit-error rate (BER) threshold values of the specified alarms for a POS (Packet-Over-SONET) interface, use the posthresholdcommand in interface configuration mode. To return to the default " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "power inline", "cmd": "Router(config)# interface fastethernet5/1\nRouter(config-if)# switchport\nRouter(config-if)# power inline never\nRouter(config)# interface fastethernet5/1\nRouter(config-if)# switchport\nRouter(config-if)# power inline static max 15000\nRouter(config)# interface gigabitethernet6/3\nRouter(config-if)# switchport\nRouter(config-if)# power inline police\nRouter(config)# interface gigabitethernet", "desc": "To determine how inline power is applied to the device on the specified switch port, use the powerinline command in interface configuration mode. To return the setting to its default, use the no form " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "power enable", "cmd": "Router(config)#\nRouter(config)#\nRouter(config)#\nRouter(config)#\nRouter(config)# interface fastethernet5/1\nRouter(config-if)# switchport\nRouter(config-if)# power inline never\nRouter(config)# interface fastethernet5/1\nRouter(config-if)# switchport\nRouter(config-if)# power inline static max 15000", "desc": "To turn on power for the modules, use the power enablecommand in global configuration mode. To power down a module, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ppp link", "cmd": "Router(config-if)#\nRouter(config-if)#\nRouter(config-if)#\nRouter(config-if)#\nRouter(config-if)#\nRouter(config-if)#\nRouter(config-if)#\nRouter(config-if)#", "desc": "To generate the Point-to-Point Protocol (PPP) Link Control Protocol (LCP) down and keepalive-failure link traps or enable calls to the interface-reset vector, use the ppplinkcommand in interface confi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ppp loopback no-backoff", "cmd": "Device> enable\nDevice# configure terminal\nDevice(config)# interface Serial1/0/0:1\nDevice(config-if)# no ip address\nDevice(config-if)# encapsulation ppp\nDevice(config-if)# ppp loopback no-backoff\nDevice(config-if)# end", "desc": "To enable continuous Link Control Protocol (LCP) negotiation of loopback links with PPP sessions, use the ppp loopback no-backoff command in interface configuration mode. To restrict negotiation of lo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ppp multilink mrru", "cmd": "ppp multilink mrru", "desc": "To configure the maximum receive reconstructed unit (MRRU) value negotiated on a Multilink PPP (MLP) bundle, use the pppmultilinkmrrucommand in interface configuration mode. To remove the configured" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pri-group", "cmd": "Router# isdn switch-type primary-4ess\nRouter(config)# controllers t1 1/0\nRouter(config-controller)# framing esf\nRouter(config-controller)# linecode b8zs\nRouter(config-controller)# pri-group timeslots 2-6", "desc": "To specify ISDN PRI on a channelized E1 or T1 card on a Cisco 7500 series router, use the pri-group command in controller configuration mode. To remove the ISDN PRI, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "priority1", "cmd": "Device> enable\nDevice# configure terminal\nDevice# ptp clock ordinary domain 0\nDevice(config-ptp-clk)# priority1 128\nDevice(config-ptp-clk)# end", "desc": "To set a preference level for a Precision Time Protocol clock, use the priority1 command in PTP clock configuration mode. To remove a priority1 configuration, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "proactive enable", "cmd": "Router# configure terminal\nRouter(config)# controller dwdm 0/1\nRouter(config-controller)# proactive enable", "desc": "To enable automatic triggering of Forward Error Correction-Fast Re-Route (FEC-FRR), use the proactive enable command in DWDM configuration mode. To disable automatic triggering, use the no form of thi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "proactive rvrt-threshold", "cmd": "Router>enable\nRouter# configure terminal\nRouter(config-controller)# proactive rvrt-threshold 1 6", "desc": "To configure the revert threshold to trigger reverting from the Forward Error Correction-Fast Re-Route (FEC-FRR) route back to the original route, use the proactive rvrt-threshold command in DWDM conf" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "protection-group", "cmd": "protection-group\nprotection-group group id type STS48c\ntype Protection group type", "desc": "Interfaces — protection-group" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "protection-group [working | protect]", "cmd": "protection-group [working | protect]\nprotection-group group id [working | protect]", "desc": "Interfaces — protection-group [working | protect]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "protocol gre", "cmd": "Router(config-l3vpn-encap-ip)# protocol gre key 500", "desc": "To specify GRE as the tunnel mode and to set the GRE key for configuring the L3VPN encapsulation profile, use the protocolgre command in L3 VPN encapsulation configuration mode. To remove the transpor" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ptp clock", "cmd": "Router# configure terminal\nRouter# ptp clock ordinary domain 0\nRouter(config-ptp-clk)#", "desc": "To create a Precision Time Protocol clock and specify the clock mode, use the ptpclock command in the global configuration mode. To remove a ptp clock configuration, use the no form of this command. p" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "pulse-time", "cmd": "Router(config)# interface serial 2\nRouter(config-if)# pulse-time 3\nRouter(config)# interface hssi 2/1/0\nRouter(config-if)# pulse-time msec 150", "desc": "To enable pulsing data terminal ready (DTR) signal intervals on the serial interfaces, use the pulse-time command in interface configuration mode. To restore the default interval, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "rate", "cmd": "rate", "desc": "Interfaces — rate" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "recovered-clock", "cmd": "recovered-clock\nrecovered-clock bay slot", "desc": "To configure an associated clock ID with the corresponding CEM circuit, use the recovered-clock command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "redundancy", "cmd": "Router(config)# redundancy\nRouter(config-red)#\nRouter(config)# redundancy\nRouter(config-red)# failover group-number 25\nRouter(config)# redundancy\nRouter(config-r)# linecard-group 1 y-cable\nRouter(config-r-lc)# member subslot 2/1 primary\nRouter(config-r-lc)# member subslot 2/0 secondary\nRouter(config)#\nRouter(config-r)#", "desc": "To enter redundancy configuration mode, use the redundancycommand in global configuration mode. This command does not have a no form." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "redundancy all-active replicate", "cmd": "redundancy all-active replicate\nredundancy all-activereplicate\nno redundancy all-activereplicate", "desc": "To enable all-active pseudowire redundancy mode with traffic replication, use the redundancy all-active replicate command in global or interface configuration mode. To disable this functionality, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "redundancy force-switchover", "cmd": "Router# configure terminal\nRouter(config)# hw-module slot 7 image slot0:rsp-pv-mz\nRouter(config)# hw-module slot 6 image slot0:rsp-pv-mz\nRouter(config)# slave auto-sync config\nRouter(config)# redundancy\nRouter(config-r)# mode rpr\nRouter(config-r)# end\nRouter# copy running-config startup-config\nRouter# redundancy force-switchover\nRouter# redundancy force-switchover", "desc": "To force the standby Route Processor (RP) or Supervisor card to assume the role of the active RP or Supervisor card, use the redundancy force-switchover command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "redundancy handover", "cmd": "Router# redundancy handover shelf-resources busyout-period 10 at 22:00 3 Sep 2005", "desc": "To hand over control of resources (slots and cards) from a route-switch-controller (RSC) card to its peer RSC card, use the redundancyhandover command in privileged EXEC mode. redundancy handover {can" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "redundancy stateful", "cmd": "redundancy stateful\nredundancy standby-group-name stateful\nno redundancy standby-group-name stateful", "desc": "To configure stateful failover for tunnels using IP Security (IPSec), use the redundancystatefulcommand in crypto map configuration mode. To disable stateful failover for tunnel protection, use the no" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "remote-span", "cmd": "Router(config-vlan)# remote-span\nRouter(config-vlan)# no remote-span", "desc": "To configure a virtual local area network (VLAN) as a remote switched port analyzer (RSPAN) VLAN, use the remote-span command in config-VLAN mode. To remove the RSPAN designation, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "remote login", "cmd": "Router#\nRouter#\nRouter# remote login module 1\nRouter# remote login switch\nRouter# remote login standby-rp", "desc": "To access the Cisco 7600 series router console or a specific module, use the remote login command in privileged EXEC mode. remote login {module num | standby-rp | switch}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "reset (alarm-interface)", "cmd": "Router(alarm-aic)# reset", "desc": "To reset the CPU in the alarm interface controller (AIC), use the resetcommand in alarm-interface mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "retry", "cmd": "Router(config)# ip slb serverfarm serverfarm-name\nRouter(config-slb-sfarm)# real 10.1.1.1\nRouter(config-if)#", "desc": "To define the amount of time that must elapse before a connection is attempted to a failed server, use the retry command in interface configuration mode. To change the connection-reassignment threshol" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ring-speed", "cmd": "Router(config)# interface tokenring 0\nRouter(config-if)# ring-speed 4", "desc": "To set the ring speed for the CSC-1R and CSC-2R Token Ring interfaces, use the ring-speed command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "rj45-auto-detect-polarity", "cmd": "router(config-if)# rj45-auto-detect-polarity enable", "desc": "To enable or disable polarity detection for 10 Mbps full-duplex links, use the rj45-auto-detect-polarity command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "scramble", "cmd": "Router(config)# interface serial 1/0/0\nRouter(config-if)# scramble\nRouter(config)# interface serial 1/0\nRouter(config-if)# scramble", "desc": "To enable scrambling (encryption) of the payload on a T3 or E3 controller or on the PA-T3 and PA-E3 port adapters, use the scramble command in interface configuration mode. To disable scrambling, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "serial restart-delay", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# serial restart-delay 0", "desc": "To set the amount of time that the router waits before trying to bring up a serial interface when it goes down, use the serialrestart-delay command in interface configuration mode. To restore the defa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service alarm persistency interval", "cmd": "service alarm persistency interval", "desc": "To configure alarm history that helps in defining the periodicity or the interval at which the alarm entries are saved in the designated file., use the service alarm persistency interval command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service declassify", "cmd": "Router# service declassify erase-all\nRouter# service declassify erase-flash\nRouter# service declassify erase-nvram", "desc": "To enable the declassification function to monitor the auxiliary (AUX) port Clear To Send (CTS) pin, use the servicedeclassify command in global configuration mode. To disable, use the no form of this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-engine default-gateway", "cmd": "service-engine default-gateway", "desc": "To define a default gateway router IP address for the Cisco WebEx Node SPA in a Cisco ASR 1000 Series" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-engine hostname", "cmd": "Router(config)# interface service-engine 1/0\nRouter(config-if)# shutdown\nRouter(config-if)# service-engine hostname wma-spa-1 cisco.com", "desc": "To specify or modify the hostname or domain name associated with a Cisco WebEx Node SPA on a Cisco" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-engine ip address", "cmd": "service-engine ip address", "desc": "To select and configure the internal interface for management traffic for the WebEx Node SPA on a Cisco" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service single-slot-reload-enable", "cmd": "Router(config)# service single-slot-reload-enable", "desc": "To enable single line card reloading for all line cards in the Cisco 7500 series router, use the servicesingle-slot-reload-enablecommand in global configuration mode. To disable single line card reloa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module", "cmd": "Router# service-module GigabitEthernet 1/0 heartbeat-reset disable\nRouter# service-moduleGigabitEthernet1/0status\nRouter(config)# interface GigabitEthernet 1/0\nRouter(config-if)# shutdown\nRouter# service-module GigabitEthernet 1/0 shutdown", "desc": "To set service module parameters, use the service-modulecommandinprivilegedEXEC mode. service-module GigabitEthernet interface-number {heartbeat-reset {disable | enable} | password-reset | reload | re" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module 56k clock rate", "cmd": "service-module 56k clock rate\nno service-module 56k clock rate speed", "desc": "To configure the network line speed for a serial interface on a 4-wire, 56/64-kbps CSU/DSU module, use the service-module56kclockratecommand in interface configuration mode. To enable a network line s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module 56k clock source", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# service-module 56k clock source internal\nRouter(config-if)# service-module 56k clock rate 38.4", "desc": "To set up the clock source on a serial interface for a 4-wire, 56/64-kbps CSU/DSU module, use the service-module56kclocksourcecommand in interface configuration mode. To specify that the clocking come" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module 56k data-coding", "cmd": "Router(config)# interface serial 0\nRouter(config-if)# service-module 56k clock rate 64\nRouter(config-if)# service-module 56k data-coding scrambled", "desc": "To prevent application data from replicating loopback codes when operating at 64 kbps on a 4-wire CSU/DSU, use the service-module56kdata-coding command in interface configuration mode. To enable norma" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module 56k network-type", "cmd": "Router(config)# interface serial 0", "desc": "To transmit packets in switched dial-up mode or digital data service (DDS) mode using a serial interface on a 4-wire, 56/64-kbps CSU/DSU module, use the service-module56knetwork-typecommand in interfa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module analysis-module reload", "cmd": "Router# service-module analysis-module 1/0 reload", "desc": "To perform a graceful halt and reboot of the Network Analysis Module (NAM) software on the NM-NAM network module, use the service-moduleanalysis-modulereload command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module analysis-module reset", "cmd": "Router# service-module analysis-module 1/0 reset", "desc": "To reset the hardware on the Network Analysis Module (NM-NAM), use the service-moduleanalysis-modulereset command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module analysis-module session", "cmd": "Router# service-module analysis-module 2/0 session\nRouter# service-module analysis-module 1/0 session clear", "desc": "To access the Network Analysis Module (NAM) console from the router, use the service-moduleanalysis-modulesession command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module analysis-module shutdown", "cmd": "Router# service-module analysis-module 1/0 shutdown\nRouter# service-module analysis-module 2/0 shutdown no-confirm", "desc": "To gracefully halt the operating system on the Network Analysis Module (NM-NAM), use the service-moduleanalysis-moduleshutdown command in privileged EXEC mode. service-module analysis-module slot/unit" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module analysis-module status", "cmd": "Router# service-module analysis-module 1/0 status", "desc": "To display hardware and software status information about the Network Analysis Module (NM-NAM), use the service-moduleanalysis-modulestatus command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module backup interface", "cmd": "Router(config-if)# service-module backup interface async1", "desc": "To configure an interface as a secondary or dial backup to the satellite interface, use the servicemodulebackupinterface command in satellite interface configuration mode. To remove the backup interfa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module backup mode", "cmd": "Router(config-if)# service-module backup mode hub\nRouter(config-if)# service-module backup mode router", "desc": "To set the terrestrial dial backup mode for the Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT), use the service-modulebackupmode command in satellite interface configuration mode. To retu" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module content-engine reload", "cmd": "Router# service-module content-engine 1/0 reload", "desc": "To perform a graceful halt and reboot of a content engine (CE) network module operating system, use the service-modulecontent-enginereload command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module content-engine reset", "cmd": "Router# service-module content-engine 1/0 reset", "desc": "To reset the hardware on a content engine (CE) network module, use the service-modulecontent-enginereset command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module content-engine session", "cmd": "Router# service-module content-engine 2/0 session\nRouter# service-module content-engine 1/0 session clear", "desc": "To access a content engine (CE) network module console and begin a configuration session, use the service-modulecontent-enginesession command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module content-engine shutdown", "cmd": "Router# service-module content-engine 1/0 shutdown", "desc": "To gracefully halt a content engine (CE) network module, use the service-modulecontent-engineshutdown command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module content-engine status", "cmd": "Router# service-module content-engine 1/0 status", "desc": "To display configuration information related to the hardware and software on the content engine (CE) side of a CE network module, use the service-modulecontent-enginestatuscommand in privileged EXEC m" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module external ip address", "cmd": "Router(config)# interface content-engine 1/0\nRouter(config-if)# service-module external ip address\nRouter(config-if)# exit", "desc": "To define the IP address for the external LAN interface on a content engine (CE) network module, use the service-moduleexternalipaddresscommand in content-engine interface configuration mode. To delet" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module heartbeat-reset disable", "cmd": "Router(config)# interface sm 1/0\nRouter(config-if)# service-module heartbeat-reset disable", "desc": "To disable the service module from being reset when the heartbeat is lost, use the service-module heartbeat-reset disable command in configuration interface mode. To allow a reset of the service modul" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ids-sensor", "cmd": "Router# service-module ids-sensor 1/0 reload\nRouter# service-module ids-sensor 1/0 reset\nRouter# service-module ids-sensor 1/0 session\nRouter# service-module ids-sensor 1/0 shutdown\nRouter# service-module ids-sensor 1/0 status", "desc": "To reboot, reset, enable console access to, shutdown, and monitor the status of the Cisco Intrusion Detection" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module integrated-service-engine default-boot", "cmd": "Router# service-module integrated-service-engine 2/0 default-boot\nRouter# service-module integrated-service-engine 2/0 default-boot clear\nRouter# service-module integrated-service-engine 2/0 default-boot set", "desc": "To configure the integrated-service-engine (ISE) network module to use the default BIOS and bootloader, use the service-module integrated-service-engine default-boot command in privileged EXEC mode. s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module integrated-service-engine reload", "cmd": "Router# service-module integrated-service-engine 1/0 reload", "desc": "To perform a graceful shutdown and reboot of the integrated-service-engine (ISE) network module operating system, use the service-moduleintegrated-service-enginereload command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module integrated-service-engine reset", "cmd": "Router# service-module integrated-service-engine 1/0 reset", "desc": "To reset the integrated-service-engine (ISE) network module hardware, use the service-moduleintegrated-service-enginereset command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module integrated-service-engine session", "cmd": "Router# service-module integrated-service-engine 2/0 session\nRouter# service-module integrated-service-engine 1/0 session clear", "desc": "To begin a configuration session with an integrated-service-engine (ISE) network module through a console connection, use the service-moduleintegrated-service-enginesession command in privileged EXEC " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module integrated-service-engine shutdown", "cmd": "Router# service-module integrated-service-engine 1/0 shutdown", "desc": "To gracefully shut down an integrated-service-engine (ISE) network module, use the service-moduleintegrated-service-engineshutdown command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module integrated-service-engine status", "cmd": "Router# service-module integrated-service-engine 1/0 status", "desc": "To display configuration information related to the hardware and software on the integrated-service-engine (ISE) side of a network module, use the service-moduleintegrated-service-enginestatuscommand " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module integrated-service-engine statistics", "cmd": "Router# service-module integrated-service-engine 2/0 statistics", "desc": "To display reset and reload information for an integrated-service-engine (ISE) network module and its Cisco" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ip address", "cmd": "Router(config)# interface content-engine 1/0\nRouter(config-if)# service-module ip address 172.18.12.26 255.255.255.0\nRouter(config-if)# exit\nRouter(config)# interface satellite 1/0\nRouter(config-if)# ip address 10.0.0.7 255.255.255.0\nRouter(config-if)# service-module ip address 10.0.0.6 255.255.255.0\nRouter(config-if)# end\nRouter# show running-config | begin Satellite\nRouter(config)# interface cable-modem 0\nRouter(config-if)# service-module ip address 172.18.12.26 255.255.255.0", "desc": "To define the IP address for the internal network-module-side interface on a content engine network module (NM-CE-BP), Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT), Cisco cable modem hi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ip default-gateway", "cmd": "Router(config)# interface content-engine\nRouter(config-if)# service-module ip default-gateway\nRouter(config-if)# exit", "desc": "To define a default gateway (router) for a content engine (CE) network module, use the service-moduleipdefault-gatewaycommand in content-engine interface configuration mode. To remove the default gate" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ip redundancy", "cmd": "service-module ip redundancy", "desc": "To link the primary HSRP interface status to that of the satellite interface, use the service-module ip redundancy command in satellite interface configuration mode. To remove the link between the pri" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ism default-boot", "cmd": "Router# service-module ism 0/0 default-boot\nRouter# service-module ism 0/0 default-boot clear\nRouter# service-module ism 0/0 default-boot set", "desc": "To configure the internal service module (ISM) to use the default BIOS and bootloader, use the service-moduleismdefault-boot command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ism heartbeat-reset", "cmd": "Router# service-module ism 0/0 heartbeat-reset disable\nRouter# service-module ism 0/0 status", "desc": "To prevent Cisco IOS software from rebooting the internal service module (ISM) when the heartbeat is lost, use the service-moduleismheartbeat-reset command in privileged EXEC mode. service-module ism " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ism install", "cmd": "Router# service-module ism 0/0 install url ftp://username:passwd@server.com/axp\nRouter# service-module ism 0/0 install url ftp://server.com/cue script help.sre\nRouter#\nRouter# service-module ism 0/0 install url ftp://server.com/cue argument “lang=en_us”\nRouter#", "desc": "To use Cisco SRE to install an application on a internal service module (Cisco ISM-SRE), use the service-moduleisminstallcommand in privileged EXEC configuration mode. service-module ism slot/port ins" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ism install abort", "cmd": "Router# service-module ism 0/0 install abort force", "desc": "To abort the Cisco SRE install process on a Cisco ISM-SRE, use the service-moduleisminstallabortcommand in privileged EXEC configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ism reload", "cmd": "Router# service-module ism 0/0 reload", "desc": "To perform a graceful shutdown and reboot of the internal service module (ISM) operating system, use the service-moduleismreload command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ism reset", "cmd": "Router# service-module ism 0/0 reset", "desc": "To reset the internal service module (ISM) hardware, use the service-moduleismreset command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ism session", "cmd": "Router# service-module ism 0/0 session\nRouter# service-module ism 0/0 session clear", "desc": "To begin a configuration session for an internal service module (ISM) through a console connection, use the service-moduleismsession command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ism shutdown", "cmd": "Router# service-module ism 0/0 shutdown", "desc": "To gracefully shut down an internal service module (ISM), use the service-moduleismshutdown command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ism statistics", "cmd": "Router# service-module ism 0/0 statistics", "desc": "To display reset and reload information for an internal service module (ISM) and its Cisco IOS software, use the service-moduleismstatisticscommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ism status", "cmd": "Router# service-module ism 0/0 status", "desc": "To display configuration information related to the hardware and software on an internal service module (ISM), use the service-moduleismstatuscommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module ism uninstall", "cmd": "Router# service-module ism 0/0 uninstall force\nRouter#", "desc": "To use Cisco SRE to uninstall an application on an internal service module (Cisco ISM-SRE), use the service-moduleismuninstallcommand in privileged EXEC configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module mgf ip address", "cmd": "Router(config)# interface sm 1/0\nRouter(config-if)# service-module mgf ip address 192.0.2.0\nRouter(config-if)# service-module mgf ip address 192.0.2.1 vlan 20", "desc": "To place the service module (Cisco SM-SRE or Cisco ISM-SRE) on a subnet, use the service-modulemgfipaddresscommand in interface configuration mode. service-module mgf ip address ip-address subnet-mask" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module mgf ip default-gateway", "cmd": "Router(config)# interface sm 2/0\nRouter(config-if)# service-module mgf ip default-gateway 192.0.2.0", "desc": "To define a default gateway (router) for a service module (Cisco SRE SM or Cisco SRE ISM), use the service-modulemgfipdefault-gatewaycommand in interface configuration mode. service-module mgf ip defa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module mgf ipv6 address", "cmd": "Router(config)# interface sm 2/0\nRouter(config-if)# service-module mgf ipv6 address 2001:0DB8::/48\nRouter(config-if)# service-module mgf ipv6 address 2001:0DB8::/48 vlan 20", "desc": "To place the service module (Cisco SM-SRE or Cisco ISM-SRE) on a subnet, use the service-modulemgfipv6addresscommand in interface configuration mode. service-module mgf ipv6 address ipv6-address [vlan" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module routing redistribute", "cmd": "Router(config-if)# no service-module routing redistribute", "desc": "To enable the router to send its routing database to the satellite network central hub, use the service-moduleroutingredistribute command in satellite interface configuration mode. To prevent the rout" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module satellite backup", "cmd": "Router# service-module satellite 1/0 backup initiate\nRouter# service-module satellite 1/0 backup terminate", "desc": "To test the hub dial backup connection for the Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT), use the service-modulesatellitebackup command in privileged EXEC mode. service module satell" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module satellite configuration", "cmd": "Router> service-module satellite 1/0 configuration\nRouter(sat-init-config)>", "desc": "To enter satellite initial configuration mode, use the service-modulesatelliteconfigurationcommand in user" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module satellite cw-mode", "cmd": "Router# service-module satellite 1/0 cw-mode on frequency 900000 time 120\nRouter# service-module satellite 1/0 cw-mode off\nRouter# service-module satellite 1/0 cw-mode on frequency 900000 time 120", "desc": "To enable or disable continuous wave mode, use the service-modulesatellitecw-mode command in satellite interface configuration mode. service-module satellite slot/unit cw-mode {off | on frequency freq" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module satellite status", "cmd": "Router# service-module satellite 2/0 status\nRouter# service-module satellite 1/0 status\nRouter# service-module satellite 2/0 status\nRouter# service-module satellite 1/0 status\nRouter# service-module satellite 1/0 status\nRouter# service-module satellite 1/0 status log", "desc": "To display status information related to the hardware and software on the Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT), including the initial configuration parameters, use theservice-mo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module service-engine", "cmd": "Router# service-module service-engine 4/0 session\nRouter# Trying 172.18.106.66, 2129 ... Open", "desc": "To enter the Cisco Unity Express command environment using a network module (NM) or an advanced" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module sm default-boot", "cmd": "Router# service-module sm 1/0 default-boot\nRouter# service-module sm 1/0 default-boot clear\nRouter# service-module sm 1/0 default-boot set", "desc": "To configure the SM-SRE service module to use the default BIOS and bootloader, use the service-modulesmdefault-boot command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module sm heartbeat-reset", "cmd": "Router# service-module sm 1/0 heartbeat-reset disable\nRouter# service-module sm 1/0 status", "desc": "To prevent Cisco IOS software from rebooting the SM-SRE service module when the heartbeat is lost, use the service-modulesmheartbeat-reset command in privileged EXEC mode. service-module sm slot/port " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module sm install", "cmd": "Router# service-module sm 1/0 install url ftp://username:passwd@server.com/axp\nRouter# service-module sm 1/0 install url ftp://server.com/cue script help.sre\nRouter#\nRouter# service-module sm 1/0 install url ftp://server.com/cue argument “lang=en_us”\nRouter#", "desc": "To use Cisco SRE to install an application on a service module (Cisco SM-SRE), use the service-modulesminstallcommand in privileged EXEC configuration mode. service-module sm slot/port install url url" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module sm install abort", "cmd": "Router# service-module sm 4/0 install abort force", "desc": "To abort the Cisco SRE install process on a Cisco SM-SRE, use the service-modulesminstallabortcommand in privileged EXEC configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module sm reload", "cmd": "Router# service-module sm 1/0 reload", "desc": "To perform a graceful shutdown and reboot of the SM-SRE service module operating system, use the service-modulesmreload command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module sm reset", "cmd": "Router# service-module sm 1/0 reset", "desc": "To reset the SM-SRE service module hardware, use the service-modulesmreset command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module sm session", "cmd": "Router# service-module sm 1/0 session\nRouter# service-module sm 1/0 session clear", "desc": "To begin a configuration session for an SM-SRE service module through a console connection, use the service-modulesmsession command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module sm shutdown", "cmd": "Router# service-module sm 1/0 shutdown", "desc": "To gracefully shut down an SM-SRE service module, use the service-modulesmshutdown command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module sm statistics", "cmd": "Router# service-module sm 1/0 statistics", "desc": "To display reset and reload information for an SM-SRE service module and its Cisco IOS software, use the service-modulesmstatisticscommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module sm status", "cmd": "Router# service-module sm 1/0 status", "desc": "To display configuration information related to the hardware and software on an SM-SRE service module, use the service-modulesmstatuscommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module sm uninstall", "cmd": "Router# service-module\nRouter#", "desc": "To use Cisco SRE to uninstall an application on a service module (Cisco SM-SRE), use the service-modulesmuninstallcommand in privileged EXEC configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module t1 cablelength short", "cmd": "Router(config)# interface serial 0/0\nRouter(config-if)# service-module t1 cablelength short 220ft", "desc": "To set transmission attenuation for shorter cable lengths, use the service-modulet1cablelengthshort command in interface configuration mode. To disable transmission attenuation for shorter cable lengt" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module t1 framing", "cmd": "service-module t1 framing", "desc": "To select the frame type for a line using the fractional T1/T1 (FT1/T1) module, use the service-modulet1framing command in interface configuration mode. To revert to the default, Extended Super" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module t1 remote-loopback", "cmd": "Router(config)# interface serial 0/0\nRouter(config-if)# service-module t1 remote-loopback full\nRouter(config-if)# loopback remote full\nRouter(config-if)# no loopback remote\nRouter(config-if)# service-module t1 remote-loopback payload v54\nRouter(config-if)# loopback remote payload", "desc": "To specify that the fractional T1/T1 DSU/CSU module enters loopback mode when it receives a loopback code on the line, use the service-modulet1remote-loopback command in interface configuration mode. " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module t1 timeslots", "cmd": "service-module t1 timeslots", "desc": "To define time slots that constitute a fractional T1/T1 (FT1/T1) channel , use the service-modulet1timeslotscommand in interface configuration mode. To resume the default setting (all" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module wlan-ap bootimage", "cmd": "Router#configure terminal\nRouter(config)#service-module wlan-ap 0 bootimage unified\nRouter(config)#end\nRouter#\nRouter#service-module wlan-ap 0 reload\nRouter#", "desc": "To configure the boot image on the service module, use the service-module wlan-ap bootimage command in privileged EXEC mode. service-module wlan-ap interface number bootimage [autonomous | unified]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module wlan-ap reload", "cmd": "Router# service-module wlan-ap0 reload\nRouter# reload\nRouter# service-module wlan-ap0 reload\nRouter# reload", "desc": "To perform a graceful shutdown and reboot of the service module use the service-module wlan-ap reload command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module wlan-ap reset", "cmd": "Router# service-module wlan-ap0 reset\nRouter# service-module wlan-ap0 reset\nRouter#service-module wlan-ap 0 reset default-config\nRouter#\nRouter#service-module wlan-ap0 reset bootloader\nRouter#", "desc": "To reset the service module hardware, software, and configuration, use the service-module wlan-ap reset command in privileged EXEC mode. service-module wlan-ap interface number reset [bootloader | def" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module wlan-ap session", "cmd": "Router# service-module wlan-ap 0 session\nRouter#service-module wlan-ap 0 session clear", "desc": "To begin a configuration session with a service module through a console connection use the service-module wlan-ap session command in privileged EXEC mode. service-module wlan-ap interface number sess" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module wlan-ap statistics", "cmd": "Router#service-module wlan-ap 0 statistics", "desc": "To display reset and reload information for a service module and its operating system software, use the service-module wlan-ap statisticscommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "service-module wlan-ap status", "cmd": "Router#service-module wlan-ap 0 status\nRouter#d was introduced for embedded wireless LAN access points on Cisco 860 and 880 Series", "desc": "To display configuration information related to hardware and software on the service module, use the service-module wlan-ap statuscommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "session slot", "cmd": "Router# session slot 4 processor 2\nRouter#", "desc": "To open a session with a module (for example, the Multilayer Switch Module (MSM), Network Analysis" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "set ip df", "cmd": "set ip df\nset ip df {0 | 1}\nno set ip df {0 | 1}", "desc": "To change the Don’t Fragment (DF) bit value in the IP header, use the setipdf command in route-map configuration mode. To disable changing the DF bit value, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "set platform hardware qfp active feature ipsec event-monitor", "cmd": "Device> set platform hardware qfp active feature ipsec event-monitor type replay count 1", "desc": "To set the threshold for IP Security (IPsec) crypto failure, use the set platform hardware qfp active feature ipsec event-monitor type count command in the user EXEC mode. To reset the " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "shdsl annex", "cmd": "Router(config-controller-dsl-group)# shdsl annex ?\nRouter(config-controller-dsl-group)# shdsl annex g ?\nRouter(config-controller-dsl-group)# shdsl annex g coding ?\nRouter(config-controller-dsl-group)# shdsl annex g coding 16 ?\nRouter(config-controller-dsl-group)#shdsl annex ?\nRouter(config-controller-dsl-group)#shdsl annex f ?\nRouter(config-controller-dsl-group)#shdsl annex f ?", "desc": "To define the single-pair high-bit-rate digital subscriber line (SHDSL) G.991.2 standard, use the shdslannexcommand in config controller DSL group mode. service-module t1 linecode through show control" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "shelf-id", "cmd": "Router(config)# shelf-id 456 dial-shelf\nRouter(config)# exit", "desc": "To change the shelf number assigned to the router shelf or dial shelf on the Cisco AS5800, use the shelf-id command in global configuration mode. To return the shelf numbers to the default value, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show (satellite initial configuration)", "cmd": "Router(sat-init-config)# show\nRouter(sat-init-config)#", "desc": "To display the initial configuration parameters for the Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT), use the show command in satellite initial configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show alarm-interface", "cmd": "Router# show alarm-interface 5 summary\nRouter# show alarm-interface 4", "desc": "To display the alarm interface controller (AIC) configuration setting and the information sent to the Cisco" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show alarm-profile", "cmd": "show alarm-profile", "desc": "To verify the alarm profile configured for chassis, use the show alarm-profile command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show als", "cmd": "Router# show als interface t2/1\nRouter# show als all", "desc": "To display Automatic Laser Shutdown (ALS) status, use the show als command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show aps", "cmd": "show aps\nshow aps commandshow aps", "desc": "To display information about the current automatic protection switching (APS) feature, use the showaps command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show asic-version", "cmd": "Router# show asic-version slot 1\nRouter#", "desc": "To display the application-specific integrated circuit (ASIC) version for a specific module, use the showasic-version command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show c7300", "cmd": "Router# show c7300\nRouter# show c7300\nRouter# show c7300\nRouter# show c7300", "desc": "To display the types and status of cards installed in a Cisco 7304 router, use the showc7300command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show c7300 errorlog", "cmd": "Router# show c7300 errorlog slot 2\nRouter# show c7300 errorlog slot all", "desc": "To display error information on a Cisco 7304 router running pre-Cisco IOS Release 12.2(25)S software, use the showc7300errorlogcommand in privileged EXEC mode. show c7300 errorlog [slot slot-number | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show c7300 pxf accounting", "cmd": "Router# show c7300 pxf accounting", "desc": "To display the number and types of packets entering or exiting the PXF processors, use the showc7300pxfaccounting command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show c7300 pxf interfaces", "cmd": "Router# show c7300 pxf interfaces 1\nRouter# show c7300 pxf interfaces", "desc": "Interfaces — show c7300 pxf interfaces" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show c7300 slot", "cmd": "Router# show c7300 slot 4\nDevice#0: EEPROM\nDevice#1: CPLD\nDevice#2: FPGA Flash", "desc": "To display various output useful for technical support purposes, enter the showc7300slotcommand in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show cable bundle", "cmd": "Router# show cable bundle 25 forwarding-table", "desc": "To display the forwarding table for the specified interface, use the showcablebundle command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show cable-diagnostics tdr", "cmd": "Router# show cable-diagnostics tdr interface gigabitethernet 8/1", "desc": "To display the test results for the Time Domain Reflectometry (TDR) cable diagnostics, use the showcable-diagnosticstdrcommand in privileged EXEC mode. show cable-diagnostics tdr interface interface i" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show card-protection CPGN detail", "cmd": "show card-protection CPGN detail", "desc": "To verify card protection configuration, use the show card-protection CPGN detail command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show catalyst6000", "cmd": "Router>\nRouter>\nRouter#\nRouter#\nRouter> show catalyst6000 switching-clock\nRouter>", "desc": "To display the information about the chassis, use the show catalyst6000 command in user EXEC or privileged show catalyst6000 {all | chassis-mac-address | switching-clock | traffic-meter}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show cem", "cmd": "Router# show cem summary", "desc": "To display circuit emulation (CEM) statistics, use the showcem command in privileged EXEC mode. show cem {slot /port /channel | summary}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show cem circuit", "cmd": "Router# show cem circuit\nRouter# show cem circuit 5\nRouter# show cem circuit detail", "desc": "To display the circuit emulation (CEM) statistics for the configured CEM circuits, use theshowcemcircuitcommand in privileged EXEC mode. show cem circuit [cem-group-id | interface {CEM | Virtual-CEM} " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show chassis", "cmd": "Router# show chassis\nRouter# show chassis\nRouter# show chassis slot 0", "desc": "To display processor and memory information, use the showchassis command in privileged EXEC mode. show chassis [clocks | slot slot-number [detail] | split | detail]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show class cem", "cmd": "Router# show class cem cemqos\nRouter# show class cem detail\nRouter# show class cem all\nRouter#show inter\nRouter#show interfaces cem 0/1/0", "desc": "Interfaces — show class cem" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show compress", "cmd": "Router# show compress\nRouter# show compress", "desc": "To display compression statistics, use the showcompress command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers c3794", "cmd": "Router# show controllers c3794", "desc": "To display information about configuration of C37.94 controller, use the show controllers c3794 command in global configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controller dsl", "cmd": "Router# show controller dsl 1/0\nRouter# show controller dsl 0/0\nRouter# show controller dsl 1/0\nRouter# show controller dsl 1/0", "desc": "To display the DSL controller status and the statistics of a DSL port, use the showcontrollerdsl command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controller vdsl", "cmd": "router# show controller vdsl 0/0/0", "desc": "To display VDSL controller related information, use the showcontrollervdsl command in privileged EXEC show controller vdsl slot/subslot/portnumber [bit-alloc | brief | console | crash | datapath | del" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers analysis-module", "cmd": "Router# show controllers analysis-module 2/0", "desc": "To display controller information for the analysis module interface, use the showcontrollersanalysis-module command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers cbus", "cmd": "Router# show controllers cbus\nRouter# show controllers cbus\nRouter# show controllers cbus\nRouter# show controllers cbus\nRouter# show controllers cbus\nRouter# show controllers cbus\nRouter# show controllers cbus\nRouter# show controllers cbus | include ipc|slot", "desc": "To display all information under the cBus controller card including the capabilities of the card and reports controller-related failures, use the showcontrollerscbus command in privileged EXEC mode on" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers content-engine", "cmd": "Router# show controllers content-engine 1/0", "desc": "To display controller information for content engine (CE) network modules, use the showcontrollerscontent-engine command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers dsx3", "cmd": "Router# show controllers dsX3 3/0/0", "desc": "To display digital signal level 3 cross connect (dsx3) information and to display hardware and software driver information for the dsx3 controller, use the showcontrollersdsx3command in privileged EXE" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controller dwdm", "cmd": "Router# show controller dwdm 2/3", "desc": "To display ITU-T G.709 alarms, alerts, and counters for a dense wavelength division multiplexing (DWDM) controller, use the showcontrollerdwdmcommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers e1", "cmd": "Router# show controllers e1\nRouter#\nRouter# show controllers e1 timeslots 1\nRouter# show controllers e1 0/2/1", "desc": "To display information about E1 links, use the showcontrollerse1command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers e3", "cmd": "Router# show controllers e3 2/0\nRouter# show controllers e3 2/0 brief\nRouter# show controllers e3 2/0 tabular\nRouter# show controllers e3 0/4/40", "desc": "To display information about an E3 controller, use theshowcontrollerse3command in user EXEC or privileged show controllers e3 slot/port [brief | tabular]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers ethernet", "cmd": "Router# show controllers ethernet 0", "desc": "To display the hardware information specific to the Ethernet interface on Cisco 2500 and Cisco 4000 series routers, use the showcontrollersethernet command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers fastethernet", "cmd": "Router# show controllers fastethernet 0\nRouter# show controller fastethernet 0\nRouter# show controllers fastethernet 0/0\nRouter# show controllers fastethernet 4/0/0", "desc": "To display information about initialization block, transmit ring, receive ring, Fast Ethernet interface information, applicable MAC destination address and VLAN filtering tables, and errors for the Fa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers fddi", "cmd": "Router# show controllers fddi", "desc": "To display all information under the FDDI Interface Processor ( FIP) on the Cisco 7200 series and Cisco 7500 series routers, use the showcontrollersfddi command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers gigabitethernet", "cmd": "Router# show controllers gigabitethernet 0/0\nRouter# show controllers gigabitethernet 0/0\nRouter# show controllers gigabitethernet 4/1/0", "desc": "To display initialization block information, transmit ring, receive ring, transmission statistics and errors, and applicable MAC destination address and VLAN filtering tables for Gigabit Ethernet inte" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers integrated-service-engine", "cmd": "Router# show controllers integrated-service-engines", "desc": "To show the Cisco wireless LAN controller network module (WLCM) on the router, use the showcontrollersintegrated-service-engine command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers ism", "cmd": "Router# show controllers ism 0/0", "desc": "To display controller information for the internal service module interface, use the showcontrollersism command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers j1", "cmd": "Router# show controllers j1 3/0", "desc": "To display statistics about the J1 link, use the showcontrollersj1command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers lex", "cmd": "Router# show controllers lex 0\nRouter#", "desc": "To show hardware and software information about the LAN Extender chassis, use the showcontrollerslex command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers mci", "cmd": "Router# show controllers mci", "desc": "To display all information under the Multiport Communications Interface (MCI) card or the Serial" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers pcbus", "cmd": "Router# show controllers pcbus", "desc": "To display all information about the bus interface, use the showcontrollerspcbus command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers pos", "cmd": "Router# show controllers pos\nRouter# show controllers pos 4/3/0\nRouter# show controllers pos3/2/0 alarm\nRouter# show controllers pos 1/0 pm", "desc": "To display information about the Packet over SONET (POS) controllers, use the showcontrollerspos command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers satellite", "cmd": "Router# show controllers satellite\nRouter# show cem circuit 0", "desc": "To display controller information about the internal router interface that connects to an installed Cisco IP" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers serial", "cmd": "Router# show controllers serial\nRouter# show controllers serial 2/0\nRouter# show controllers serial 2/0/1\nRouter# show controllers serial", "desc": "To display serial controller statistics, use the showcontrollersserialcommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers serial bert", "cmd": "Router#\nRouter# show controllers serial 6/0 bert", "desc": "To view the BERT statistics for a completed or in-progress BERT test, enter the showcontrollersserialbert in user EXEC or EXEC privileged mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers sm", "cmd": "Router# show controllers sm 1/0", "desc": "To display controller information for the service module interface, use the showcontrollerssm command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers sonet", "cmd": "Router# show controllers sonet\nRouter# show controllers sonet 3/0.1/1/3/5\nRouter# show controllers sonet\nRouter# show controllers sonet 3/0\nRouter# show controllers sonet 1/0\nRouter# show controllers sonet 0/0/0\nRouter# show controllers sonet 3/0/0.2/1\nRouter# show controllers sonet 0/3/3\nRouter# show controllers sonet 0/2/0", "desc": "To display information about Synchronous Optical Network (SONET) controllers, use the showcontrollerssonet command in user EXEC or privileged EXEC mode with the appropriate parameters for the operatin" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers t1", "cmd": "Router# show controllers t1\nRouter# show controllers t1 1/0/0:1\nRouter#\nRouter#\nRouter# show controllers t1 0/2/1", "desc": "To display information about the T1 links and to display the hardware and software driver information for the T1 controller, use the showcontrollerst1 command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers T1-E1 errors", "cmd": "Router# #show controllers e1 10/2/4 errors", "desc": "To show the last nineteen alarms on a controller, use the showcontrollerscommand in privileged EXEC mode. show controllers {t1 | e1} slot subslot port errors" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers t3", "cmd": "Router# show controllers t3 4/1/1 errors\nRouter# show controllers t3 4/1 errors\nRouter# show controllers t3 1/4/1 errors\nRouter# show controllers t3 4/1/1 errors\nRouter# show controllers t3 2/1/0\nRouter# show controllers t3 2/1/0\nRouter# show controllers t3 3/0/0\nRouter# show controllers t3 3/0/0 brief\nRouter# show controllers t3 3/0/0 tabular\nRouter# show controllers t3 6/0/0 tabular", "desc": "To display information about T3 links and to display hardware and software driver information for the T3 controller, use the showcontrollerst3command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers t3 bert", "cmd": "Router# show controllers t3 6/1/0 bert\nRouter# show controllers t3 6/1/0 bert\nRouter# show controllers t3 6/1/1/1 bert", "desc": "To display BER test statistics, use the show controllers t3 bert command in user EXEC or privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers token", "cmd": "Router# show controllers token", "desc": "To display information about memory management and error counters on the Token Ring Interface Processor (TRIP) for the Cisco 7500 series routers, use the showcontrollerstoken command in privileged EXE" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers vg-anylan", "cmd": "Router# show controllers vg-anylan 3/0", "desc": "To display the controller information for the 100VG-AnyLAN port adapter on Cisco 7200 series routers and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers wanphy", "cmd": "Router# show controllers wanphy 0/1/0", "desc": "Interfaces — show controllers wanphy" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show controllers wlan-controller", "cmd": "Router# show controllers wlan-controllers 1/0", "desc": "To show the Cisco Wireless Local Area Network (WLAN) controller network module on the router, use the showcontrollerswlan-controller command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show counters interface", "cmd": "Router# show counters interface fastethernet 5/2\nRouter#\nRouter# show counters interface gigabitethernet 5/2 delta\nRouter#", "desc": "To display the information about the interface counter, use the showcountersinterface command in user" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diag", "cmd": "Router# show diag 1\nRouter# show diag 3\nRouter# show diag summary\nRouter# show diag 4 details\nRouter# show diag 0\nRouter# show diag\nRouter# show diag 0\nRouter# show diag 4\nRouter# show diag 0\nRouter# show diag subslot 4/1", "desc": "To display hardware and diagnostic information for a networking device, line card, processor, jacket card, chassis, or network module, use the show diag command in privileged EXEC mode. show diag [slo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic bootup level", "cmd": "Router# show diagnostic bootup level", "desc": "To display the coverage level for the configured bootup diagnostics, use the showdiagnosticbootuplevelcommand in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic content module", "cmd": "Router# show diagnostic content module 5", "desc": "To display information about available tests, including test ID, test attributes, and supported coverage test levels for each test and for all modules, use the showdiagnosticcontentmodulecommand in us" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic cns", "cmd": "Router# show diagnostic cns publish\nRouter# show diagnostic cns subscribe", "desc": "To display the information about the CNS subject, use the show diagnostic cns command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic description module", "cmd": "Router# show diagnostic description module 1 test TestIPv6FibShortcut\nRouter# show diagnostic description module 1 test 15", "desc": "To display a detailed description of a diagnostic test available on a module, use the showdiagnosticdescriptionmodulecommand in user EXEC or privileged EXEC mode. show diagnostic description module {s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic events", "cmd": "Router# show diagnostic events event-type info\nRouter# show diagnostic events slot R0", "desc": "To display the diagnostic event log, use the showdiagnosticeventscommand in user EXEC or privileged show diagnostic events [event-type event-type | module {allslotslot/subslot}]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic result slot", "cmd": "Router# show diagnostic result slot all\nRouter# show diagnostic result slot R0 detail", "desc": "To display diagnostic test results for supported hardware slot locations, use the showdiagnosticresultslot command in privileged EXEC configuration mode. show diagnostic result slot [number [detail | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic simulation failure", "cmd": "Router# show diagnostic simulation failure module 1", "desc": "To display a list of simulated test failures installed by the user for a module, use the showdiagnosticsimulationfailure command in user EXEC or privileged EXEC mode. show diagnostic simulation failur" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic health", "cmd": "Router# show diagnostic health", "desc": "To display the output for the health checks performed, use the showdiagnostichealthcommand in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic ondemand settings", "cmd": "Router# show diagnostic ondemand settings", "desc": "To display the settings for the on-demand diagnostics, use the showdiagnosticondemandsettingscommand in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic result module", "cmd": "Router# show diagnostic result module 3\nRouter# show diagnostic result module 1 detail", "desc": "To display the diagnostic test results for a module, use the showdiagnosticresultcommand in user EXEC or privileged EXEC mode. show diagnostic result module {alllistslot | slot/subslot} [detail | fail" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic sanity", "cmd": "Router# show diagnostic sanity", "desc": "To display sanity check results, use the show diagnostic sanity command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic schedule module", "cmd": "Router# show diagnostic schedule module 1", "desc": "To display the current scheduled diagnostic tasks, use the showdiagnosticschedulemodulecommand in user" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show diagnostic status", "cmd": "Router# show diagnostic status", "desc": "To display the currently running diagnostics tests, use the showdiagnosticstatuscommand in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show dsc clock", "cmd": "Router# execute-on slot 12\nRouter#", "desc": "To display information about the dial shelf controller clock, use the showdscclockcommand in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show dsi", "cmd": "Router# execute-on slot 1 show dsi", "desc": "To display information about the dial shelf interconnect (DSI) port adapter parameters, use the showdsi command in privileged EXEC mode with the line card execute (execute-on) command. execute-on {slo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show dsip", "cmd": "Router# show dsip", "desc": "To display all information about the Distributed System Interconnect Protocol (DSIP) on a Cisco AS5800, use the showdsipcommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show dsip clients", "cmd": "Router# show dsip clients", "desc": "To display information about Distributed System Interconnect Protocol (DSIP) clients, use the showdsipclientscommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show dsip nodes", "cmd": "Router# show dsip nodes", "desc": "To display information about the processors running the Distributed System Interconnect Protocol (DSIP), use the showdsipnodescommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show dsip ports", "cmd": "Router# show dsip ports", "desc": "To display information about local and remote ports, use the showdsipportscommand in EXEC mode. show dsip ports [local | remote [slot]]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show dsip queue", "cmd": "Router# show dsip queue", "desc": "To display the number of IPC messages in the transmission queue waiting for acknowledgment, use the showdsipqueuecommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show dsip tracing", "cmd": "Router# debug dsip tracing\nRouter#\nRouter# show dsip tracing", "desc": "To display Distributed System Interconnect Protocol (DSIP) tracing buffer information, use the showdsiptracingcommand in EXEC mode. show dsip tracing [control | data | ipc] [slot | entries entry-numbe" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show dsip transport", "cmd": "Router# show dsip transport\nRouter#", "desc": "To display information about the Distributed System Interconnect Protocol (DSIP) transport statistics for the control/data and IPC packets and registered addresses, use the showdsiptransportcommand in" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show dsip version", "cmd": "Router# show dsip version", "desc": "To display Distributed System Interconnect Protocol (DSIP) version information, use the showdsipversioncommand in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show dtp interface", "cmd": "Router# show dtp interface gigabitEthernet 0/0\nRouter# show dtp interface", "desc": "To display the desktop publishing (DTP) interface details, use theshowdtpinterfacecommand in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show eobc", "cmd": "Router>\nRouter>\nRouter>\nRouter>", "desc": "To display the information about the Ethenet out-of-band channel (EOBC) interface, use the showeobc command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show errdisable detect", "cmd": "Router>\nRouter#", "desc": "To display the error-disable detection status, use the show errdisable detect command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show esmc", "cmd": "Device# show esmc detail", "desc": "To display the Ethernet synchronization message channel (ESMC) processes on a device, use the show esmc command in privileged EXEC mode. show esmc [detail | interface type number]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show etherchannel", "cmd": "Router# show etherchannel protocol\nRouter#\nRouter# show etherchannel 12 port-channel\nRouter# show etherchannel 15 port-channel\nRouter#\nRouter#\nRouter#\nRouter# show etherchannel\nRouter#\nRouter#", "desc": "To display EtherChannel information for a channel, use the showetherchannel command in privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show etherchannel load-balancing", "cmd": "Router# show etherchannel load-balancing", "desc": "To display the load-balancing method applied to Gigabit EtherChannel (GEC) interfaces, use the showetherchannelload-balancing command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show fabric", "cmd": "Router# show fabric active\nRouter#\nRouter# show fabric channel-counters\nRouter#\nRouter# show fabric errors\nRouter#\nRouter# show fabric switching-mode\nRouter#\nRouter# show fabric status\nRouter#", "desc": "To display the information about the crossbar fabric, use the showfabric command in EXEC mode. show fabric {channel-counters | errors | status} [slot | all] show fabric switching-mode [module {slot | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show fm inband-counters", "cmd": "Router# show fm inband-counters\nRouter#", "desc": "To display the number of inband packets that are sent by the Multilayer Switching Feature Card (MSFC) for server load balancing (SLB) and Web Cache Coprocessor Protocol (WCCP), use the showfminband-co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show gnss", "cmd": "Router# show gnss\nRouter# show gnss satellite all\nRouter# show gnss status\nRouter# show gnss time\nRouter# show gnss device", "desc": "To display the output of the GNSS configuration, use the show gnss command in privileged EXEC mode. show gnss [location | satellite | status | time | device]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show gtp", "cmd": "Device# show gtp apn 1", "desc": "To display information related to Enhanced Wireless Access Gateway (EWAG) General Packet Radio Service (GPRS) Tunneling Protocol (GTP), use the show gtp command in privileged EXEC mode. show gtp {apn " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hspw-aps-icrm", "cmd": "Router# show hspw-aps-icrm group 100\nRouter# show hspw-aps-icrm all", "desc": "To view information about hot standby pseudowires (HSPW), use the showhspw-aps-icrm command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hub", "cmd": "Router# show hub ethernet 0 2\nRouter# show hub ethernet 0", "desc": "To display information about the hub (repeater) on an Ethernet interface of a Cisco 2505 or Cisco 2507 router, use the showhub command in user EXEC or privileged EXEC mode. show hub commandshow hub [e" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module all fpd", "cmd": "Router# show hw-module all fpd\nRouter# show hw-module all fpd\nRouter# show hw-module all fpd\nRouter# show hw-module all fpd\nRouter# show hw-module all fpd", "desc": "To display the current versions of all field-programmable devices (FPDs) for all of the supported card types on a router, enter the showhw-moduleallfpd command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module slot (6500)", "cmd": "Router# show hw-module slot 2 clear-block\nRouter#\nRouter# show hw-module slot 2 port-group-mapping\nRouter# show hw-module slot 3 oversubscription\nRouter#", "desc": "To display information for a SPA interface processor (SIP) or a module, use the showhw-moduleslot command in privileged EXEC configuration mode. show hw-module slot slot {clear-block | oversubscriptio" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module slot align", "cmd": "Router# show hw-module slot 2 align", "desc": "To display alignment data for a SPA interface processor (SIP) or other module, use the showhw-moduleslotalign command in privileged EXEC configuration mode. show hw-module slot slot align [cpu {0 | 1}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module slot fpd", "cmd": "Router# show hw-module slot npe fpd\nRouter# show hw-module slot 0 fpd\nRouter# show hw-module slot 4 fpd", "desc": "To display the current versions of all field-programmable devices (FPDs) for a SIP in the specified slot location and for all of the SPAs installed in that SIP, or to display the current versions of a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module slot logging", "cmd": "Router# show hw-module slot 2 logging", "desc": "To display logging information for a SPA interface processor (SIP) or other module, use the showhw-moduleslotlogging command in privileged EXEC configuration mode. show hw-module slot slot logging [cp" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module slot proc cpu", "cmd": "Router# show hw-module slot 2 proc cpu", "desc": "To display CPU utilization for each process on a SPA interface processor (SIP) or other module, use the showhw-moduleslotproccpucommand in privileged EXEC configuration mode. show hw-module slot slot " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module slot tech-support", "cmd": "Router# show hw-module slot 5 tech-support", "desc": "To display system information for a SPA interface processor (SIP) or other module to troubleshoot a problem, use the showhw-moduleslottech-supportcommand in privileged EXEC configuration mode. show hw" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module subslot", "cmd": "Router#show hw-module subslot all oir\nRouter# show hw-module subslot 4/0 config fpga 0\nRouter# show hw-module subslot 4/0 config phy 0\nRouter# show hw-module subslot 4/0 counters fpga 0\nRouter# show hw-module subslot 4/0 status mac 0\nRouter# show hw-module subslot 4/0 status phy 0", "desc": "To display diagnostic information about internal hardware devices for a SPA, use the show hw-module subslot command in privileged EXEC configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module subslot fpd", "cmd": "Router#\nRouter#\nRouter# show hw-module subslot all fpd\nRouter#\nRouter# show hw-module subslot fpd", "desc": "To display the current versions of all field-programmable devices (FPDs) for a particular SPA or all of the active SPAs on a router, use the showhw-modulesubslotfpd command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module subslot oir", "cmd": "Router# show hw-module subslot all oir\nRouter# show hw-module subslot all oir\nRouter# show hw-module subslot 4/0 oir internal", "desc": "To display the operational status of a shared port adapter (SPA), use the showhw-modulesubslotoir command in privileged EXEC configuration mode. show hw-module subslot {slot/subslot | all} oir [intern" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module subslot service-engine status", "cmd": "show hw-module subslot service-engine status\nshow hw-module subslot slot/subslot service-engine status", "desc": "To display the Cisco WebEx Node SPA application status on a Cisco ASR 1000 Series Router, use the showhw-modulesubslotservice-enginestatuscommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-module subslot transceiver", "cmd": "Router# show hw-module subslot 7/2 transceiver 0 idprom\nRouter# show hw-module subslot 7/0 transceiver 0 idprom\nRouter# show hw-module subslot 3/2 transceiver 0 idprom brief\nRouter# show hw-module subslot 4/0 transceiver 5 idprom detail\nRouter# show hw-module subslot 4/0 transceiver 2 status", "desc": "To display the information about an optical transceiver installed in a shared port adapter (SPA), use the showhw-modulesubslottransceiver command in privileged EXEC configuration mode. show hw-module " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show hw-programmable", "cmd": "Router# show hw-programmable r0\nRouter# show hw-programmable all", "desc": "To display the current Complex Programmable Logic Device (CPLD) or Field-Programmable Gate Array (FPGA) version in a particular line card on a Cisco ASR 1000 Series Router, use the showhw-programmable" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show icc", "cmd": "Router>\nRouter#\nRouter>\nRouter#", "desc": "To display the information about the interface controller card (ICC) counter and status, use the showicc command in user EXEC or privileged EXEC mode. show icc {counters | flowcontrol | mcast | status" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces cem", "cmd": "Router# show interfaces cem 0/1/0", "desc": "Interfaces — show interfaces cem" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interface history", "cmd": "Router# show interface gigabitethernet 0/1 history 60min", "desc": "To display histograms of interface utilization, use the showinterfacehistory command in privileged EXEC show interface [type number] history [all | 60sec | 60min | 72hour] [both | input | output]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interface sdcc", "cmd": "Router# show interface sdcc 7/0/0\nRouter# show interface sdcc 1/1/0", "desc": "To display configuration information and statistics for a sections data communications channel (SDCC) interface, use the showinterfacesdcc command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces", "cmd": "Router# show interfaces\nRouter# show interfaces\nRouter# show interfaces\nRouter# show interfaces hssi 0/0/0\nRouter# show interfaces serial 2\nRouter# show interfaces\nRouter# show interfaces accounting\nRouter# show interfaces serial 1\nRouter# show interfaces fastethernet 1/1/0\nRouter# show interfaces dialer 0", "desc": "To display statistics for all interfaces configured on the router or access server, use the show interfaces command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces accounting", "cmd": "Device# show interfaces gigabitethernet 5/2 accounting", "desc": "To display the number of packets of each protocol type that have been sent through all configured interfaces, use the showinterfacesaccounting command in user EXEC or privileged EXEC mode. show interf" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces analysis-module", "cmd": "Router# show interfaces analysis-module 2/0", "desc": "To display status, traffic data, and configuration information about the analysis module interface, use the showinterfacesanalysis-module command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces bdi", "cmd": "Router# show interfaces BDI3\nasr2#sh int bdi3\nRouter#show interfaces bdi 3 summary", "desc": "To display statistics for bridge domain interfaces (BDI) configured on the router, use the show interfaces command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces capabilities", "cmd": "Router> show interfaces capabilities module 6\nRouter#\nRouter> show interfaces port-channel 12 capabilities\nRouter#", "desc": "To display the interface capabilities for a module, an interface, or all interfaces, use the showinterfacescapabilities command in user EXEC or privileged EXEC mode. show interfaces [interface interfa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces content-engine", "cmd": "Router# show interfaces content-engine 1/0\nRouter# show interfaces content-engine 3/0", "desc": "To display basic interface configuration information for a content engine (CE) network module, use the showinterfacescontent-engine command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces counters nonzero", "cmd": "Router#sh interfaces counters nonzero\nRouter#", "desc": "To get the counter information for ports which have non zero values, use the showinterfacescountersnonzero command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces ctunnel", "cmd": "Router# show interfaces ctunnel 1", "desc": "To display information about an IP over Connectionless Network service (CLNS) tunnel (CTunnel), use the showinterfacesctunnel command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces debounce", "cmd": "Router> show interfaces GigabitEthernet 1/1 debounce\nRouter>", "desc": "To display the status and configuration for the debounce timer, use the showinterfacesdebounce command in user EXEC or privileged EXEC mode. show interfaces [interface interface-number | null interfac" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "• card-type slot /first-port - last-port", "cmd": "Router> show interfaces description\nRouter>", "desc": "Interfaces — • card-type slot /first-port - last-port" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces ethernet", "cmd": "Router# show interfaces ethernet 0\nRouter# show interfaces ethernet 4/2\nRouter# show interfaces ethernet 4/2 accounting\nRouter# show interfaces ethernet vlan 2", "desc": "To display information about an Ethernet interface on the router, use the showinterfacesethernet command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces fastethernet", "cmd": "Router# show interfaces fastethernet 0\nRouter# show interfaces fastethernet 0\nRouter# show interfaces fastethernet 0/1\nRouter# show interfaces fastethernet 3/0", "desc": "To display information about the Fast Ethernet interfaces, use the showinterfacesfastethernet command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces fddi", "cmd": "Router# show interfaces fddi 3/0/0\nRouter# show interfaces fddi 0/1/0\nRouter# show interfaces fddi 3/0 accounting", "desc": "To display information about the FDDI interface, use the showinterfacesfddicommand in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces flowcontrol", "cmd": "Router> show interfaces flowcontrol\nRouter>\nRouter> show interfaces gigabitethernet 8/2 flowcontrol\nRouter>\nRouter> show interfaces flowcontrol vlan 22\nRouter>", "desc": "To display flow-control information, use the showinterfacesflowcontrol command in user EXEC or privileged show interfaces [interface [mod]] flowcontrol [module number | vlan vlan]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces gigabitethernet", "cmd": "Router# show interfaces gigabitethernet 5/1\nRouter# show interface gigabitethernet 0/0/0\nRouter# show interfaces gigabitethernet 4/0/0", "desc": "To check the status of and configuration settings on a router that supports Gigabit Ethernet Shared Port" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces hssi", "cmd": "Router# show interfaces hssi 0\nRouter# show interfaces hssi 1/0\nRouter# show interfaces hssi 1/0 accounting", "desc": "To display information about the high-speed serial interface (HSSI), use the showinterfaceshssicommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces integrated-service-engine", "cmd": "Router# show interfaces integrated-service-engine", "desc": "To show the Cisco wireless LAN controller network module (WLCM) interfaces on the router, use the showinterfacesintegrated-service-engine command in privileged EXEC mode. show interfaces integrated-se" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces ism", "cmd": "Router# show interfaces ism 0/0", "desc": "To display status, traffic data, and configuration information about the internal service module (ISM) interface, use the showinterfacesism command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces lex", "cmd": "Router# show interfaces lex 0\nRouter# show interfaces lex 0 ethernet\nRouter# show interfaces lex 0 serial", "desc": "To display statistics about a LAN Extender interface, use the showinterfaceslex command in EXEC mode. show interfaces lex commandshow interfaces lex number [ethernet | serial]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces loopback", "cmd": "Router# show interfaces loopback 0\nRouter# show interfaces loopback 0 accounting", "desc": "To display information about the loopback interface, use the showinterfacesloopbackcommand in privileged show interfaces loopback commandshow interfaces loopback [number] [accounting]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces port-channel", "cmd": "Router# show interfaces port-channel 1\nRouter# show interface port-channel 1", "desc": "To display the information about the Fast EtherChannel on Cisco 7000 series routers with the RSP7000 and" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces port-channel etherchannel", "cmd": "Router# show interfaces port-channel 2 etherchannel\nRouter(config)# show interfaces port-channel 2 etherchannel", "desc": "To display the load-balancing bucket distribution currently in use for a Gigabit EtherChannel (GEC) interface, use the showinterfacesport-channeletherchannel command in user EXEC or privileged EXEC mo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces pos", "cmd": "Router# show interfaces pos 2/0/0\nRouter# show interfaces pos 4/3/0\nRouter# show interfaces pos 1/1/0", "desc": "To display configuration information and statistics for a Packet over SONET (POS) interface, use the showinterfacespos command in user EXEC or privileged EXEC configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces private-vlan mapping", "cmd": "Router# show interfaces private-vlan mapping\nRouter#", "desc": "To display the information about the private virtual local area network (PVLAN) mapping for VLAN SVIs, use the showinterfacesprivate-vlanmapping command in user EXEC or privileged EXEC mode. show inte" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces satellite", "cmd": "Router# show interfaces satellite 2/0\nRouter# show interfaces satellite 1/0\nRouter# show interfaces satellite 2/0", "desc": "To display general interface settings and traffic rates for the internal router interface that connects to an installed Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT), use the showinterfa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces serial", "cmd": "Router# show interfaces serial\nRouter# show interfaces serial 3/0/0\nRouter# show interfaces serial 2/0\nRouter# show interfaces serial 1/0/0\nRouter# show interfaces serial 3/0/0:25\nRouter# show interfaces serial 1/0\nRouter# show interfaces serial 0\nRouter# show interfaces serial 2/3\nRouter# show interfaces serial\nRouter# show interfaces serial 3/2", "desc": "To display information about a serial interface, use theshowinterfacesserial command in privileged EXEC mode. When using Frame Relay encapsulation, use the showinterfacesserial command in user EXEC or" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces sm", "cmd": "Router# show interfaces sm 1/0", "desc": "To display status, traffic data, and configuration information about the SM-SRE service module interface, use the showinterfacessm command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces status", "cmd": "Router>\nRouter>\nRouter>\nRouter>\nRouter>\nRouter# show interfaces status vlan 2", "desc": "To display the interface status or a list of interfaces in an error-disabled state on local area network (LAN) ports only, use the showinterfacesstatus command in user EXEC or privileged EXEC mode. sh" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces summary", "cmd": "Router# show interfaces summary\nRouter# show interfaces summary vlan\nRouter#\nRouter# show interfaces summary vlan\nRouter#", "desc": "To display a summary of statistics for one interface or for all interfaces that are configured on a networking device, use the show interfaces summary command in privileged EXEC mode. For Cisco 7600 s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces switchport", "cmd": "Router>\nRouter>\nRouter>\nRouter> show interfaces switchport\nRouter>", "desc": "To display the administrative and operational status of a switching (nonrouting) port, use the showinterfacesswitchport command in user EXEC or privileged EXEC mode. show interfaces [interface interfa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces switchport backup", "cmd": "Router> show interfaces switchport backup\nRouter>\nRouter> show interfaces fastethernet 4/1 switchport backup\nRouter>", "desc": "To display Flexlink pairs, use the showinterfacesswitchportbackup command in user EXEC or privileged show interfaces [interface interface-number] switchport backup" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces tokenring", "cmd": "Router# show interfaces tokenring\nRouter# show interfaces tokenring 2/0\nRouter# show interfaces tokenring 2/0 accounting", "desc": "To display information about the Token Ring interface and the state of source route bridging, use the showinterfacestokenring command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces transceiver", "cmd": "Router# show interfaces transceiver\nRouter# show interfaces transceiver detail\nRouter# show interfaces transceiver threshold violations\nRouter# show interfaces transceiver threshold violations\nRouter#\nRouter# show interfaces transceiver threshold violations module 2\nRouter# show interfaces Gi2/1 transceiver threshold violations\nRouter# show interfaces transceiver properties module 1\nRouter#\nRouter# show interfaces g0/3 transceiver", "desc": "To display information about the optical transceivers that have digital optical monitoring (DOM) enabled, use the showinterfacestransceiver command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces transceiver details", "cmd": "Router# show interfaces transceiver details", "desc": "Interfaces — show interfaces transceiver details" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces transceiver slot", "cmd": "Router# show interfaces transceiver slot 2The Transceiver in slot 2 subslot 0 port 0 is", "desc": "Interfaces — show interfaces transceiver slot" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces transceiver slot details", "cmd": "Router# show interfaces transceiver slot 2 details", "desc": "Interfaces — show interfaces transceiver slot details" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces transceiver subslot", "cmd": "Router# show interfaces transceiver subslot 2/0", "desc": "Interfaces — show interfaces transceiver subslot" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces transceiver subslot details", "cmd": "Router# show interfaces transceiver subslot 2/0 details", "desc": "Interfaces — show interfaces transceiver subslot details" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces transceiver", "cmd": "Router# show interfaces hundredGigE 1/0/0 transceiver", "desc": "Interfaces — show interfaces transceiver" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces trunk", "cmd": "Router#\nRouter#\nRouter#\nRouter#\nRouter> show interfaces trunk vlan 22\nRouter>", "desc": "To display the interface-trunk information, use the showinterfacestrunk command in user EXEC or privileged show interfaces [interface interface-number] trunk [module number | vlan vlan]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces tunnel", "cmd": "Device# show interfaces tunnel 4\nDevice# show interfaces tunnel 0 | include route-via\nDevice# show interfaces tunnel 0 | include route-via", "desc": "To display tunnel interface information, use the showinterfacestunnel command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces ucse", "cmd": "Router# show interfaces ucse 1/0/0 switchport", "desc": "To display Cisco UCS E-Series Server interface statistics, use the show interfaces ucse command in privileged show interfaces ucse slot/subslot/ucse-interface [accounting | controller | counters | crb" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces unidirectional", "cmd": "Router# show interfaces gigabitethernet 5/2 unidirectional\nRouter#", "desc": "To display the operational state of an interface with a receive-only transceiver, use the showinterfacesunidirectional command in user EXEC or privileged EXEC mode. show interfaces [interface interfac" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces vg-anylan", "cmd": "Router# show interfaces vg-anylan 3/0/0", "desc": "To display the information about the 100VG-AnyLAN port adapter on Cisco 7200 series routers and Cisco 7500 series routers, use the showinterfacesvg-anylan command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interface gigabitethernet", "cmd": "Router# show interfaces gigabitethernet GigabitEthernet0/0/0 is down, line protocol is down", "desc": "To display the first front panel interface (port 0) in a Cisco 4451 ISR, use the showinterfaces gigabitethernet command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces vlan mapping", "cmd": "Router# show interfaces gigabitethernet 5/2 vlan mapping\nRouter#", "desc": "To display the status of a virtual local area network (VLAN) mapping on a port, use the showinterfacesvlanmapping command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show interfaces wlan-controller", "cmd": "Router# show interfaces wlan-controller 1/0", "desc": "To show the Cisco Wireless Local Area Network (WLAN) controller network module interfaces on the router, use the showinterfaceswlan-controller command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ip interface", "cmd": "Router# show running-config interface gigabitethernet 0/3\nRouter# show ip interface gigabitethernet 0/3\nRouter# show ip interface virtual-access 3\nRouter# show ip interface ethernet 2/3\nRouter#\nRouter# show ip interface vlan 1\nRouter#show ip interface brief\nRouter# show ip interface brief", "desc": "To display the usability status of interfaces configured for IP, use the show ip interface command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ipc", "cmd": "Router# show ipc nodes\nRouter# show ipc ports\nRouter# show ipc queue\nRouter# show ipc status\nRouter# show ipc status cumulative\nRouter# show ipc zones", "desc": "To display interprocess communication (IPC) statistics, use the showipc command in privileged EXEC mode. show ipc {nodes | ports [open] | queue | status [cumulative] | zones}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ipc hog-info", "cmd": "Router# show ipc hog-info\nRouter# show ipc status", "desc": "To provide information about interprocess communication (IPC) messages that consume excessive CPU, use the showipchog-infocommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ipv6 ospf interface", "cmd": "Router# show ipv6 ospf interface\nRouter# show ipv6 ospf interface brief\nRouter# show ipv6 ospf interface\nRouter# show ipv6 ospf interface\nRouter# show ipv6 ospf interface\nRouter# show ipv6 ospf interface\nRouter# show ipv6 ospf interface", "desc": "To display Open Shortest Path First (OSPF)-related interface information, use the showipv6ospfinterface command in user EXEC or privileged mode. show ipv6 ospf [process-id] [area-id] interface [type n" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show l2protocol-tunnel", "cmd": "Router# show l2protocol-tunnel", "desc": "To display the protocols that are tunneled on an interface or on all interfaces, use the showl2protocol-tunnel show l2protocol-tunnel [interface interface mod/port | summary | vlan vlan]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "--- ---- ---- ---- ---- ----", "cmd": "Router# show l2protocol-tunnel summary\nRouter# show l2protocol-tunnel vlan 1", "desc": "Interfaces — --- ---- ---- ---- ---- ----" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show l3-mgr", "cmd": "Router#\nRouter#\nRouter#\nRouter#", "desc": "To display the information about the Layer 3 manager , use the showl3-mgr command in user EXEC or privileged EXEC mode. show l3-mgr {interface interface interface-number | null interface-number | port" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show l3vpn encapsulation ip", "cmd": "Router# show l3vpn encapsulation ip tunnelencap", "desc": "To display the L3VPN encapsulation profile health and the underlying tunnel interface, use the showl3vpnencapsulationip command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show lacp", "cmd": "Device> show lacp sys-id\nDevice# show lacp 1 counters\nDevice# show lacp 1 internal\nDevice#\nDevice# show lacp 1 neighbors\nDevice#", "desc": "To display Link Aggregation Control Protocol (LACP) and multi-chassis LACP (mLACP) information, use the show lacp command in either user EXEC or privileged EXEC mode. show lacp {channel-group-number {" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show link state group", "cmd": "Router# enable\nRouter# show link state group 1\nRouter> show link state group detail", "desc": "To display the link-state group information., use the showlinkstategroup command in user EXEC or privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show mac-address-table dynamic", "cmd": "Router# show mac-address-table dynamic\nRouter# show mac-address-table dynamic\nRouter# show mac-address-table dynamic protocol assigned\nRouter#\nRouter# show mac-address-table dynamic protocol assigned detail\nRouter#\nRouter# show mac-address-table dynamic vlan 200 all\nRouter#\nRouter# show mac-address-table dynamic\nRouter#", "desc": "To display dynamic MAC address table entries only, use the showmac-address-tabledynamic command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show mls ip", "cmd": "Router#\nRouter#\nRouter#\nRouter#\nRouter# show mls ip\nRouter#\nRouter#\nRouter#", "desc": "To display the Multilayer Switching (MLS) IP information, use the showmlsip command in user EXEC or privileged EXEC mode. show mls ip [any | destination {hostnameip-address} | detail | flow {tcp | udp" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show mobility", "cmd": "Router# show mobility\nRouter# show mobility\nRouter# show mobility\nRouter# show mobility", "desc": "To display information about the Layer 3 mobility and the wireless network, use the showmobility command in privileged EXEC mode. show mobility {ap [ip-address] | mn [ip ip-address] | mac mac-address " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show module", "cmd": "Router#\nRouter#\nRouter#\nRouter#\nRouter#\nRouter#\nRouter# show module provision\nRouter#", "desc": "To display the module status and information, use the show module command in user EXEC or privileged show module [mod-num | all | provision | version]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show msfc", "cmd": "Router# show msfc buffers\nRouter#\nRouter# show msfc eeprom\nRouter#\nRouter# show msfc fault\nRouter#\nRouter# show msfc netint\nRouter#\nRouter# show msfc tlb\nRouter#", "desc": "To display Multilayer Switching Feature Card (MSFC) information, use the show msfc command in user" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show network-clocks", "cmd": "Router# show network-clocks\nRouter# show network-clocks\nRouter# show network-clocks\nRouter# show network-clocks", "desc": "To display the current configured and active network clock sources, use theshownetwork-clocks command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pagp", "cmd": "Router#\nRouter#\nRouter# show pagp\nRouter#\nRouter# show pagp\nRouter#", "desc": "To display port-channel information, use the show pagp command in user EXEC or privileged EXEC mode. show pagp [group-number] {counters | internal | neighbor | pgroup}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pas caim", "cmd": "Router# show pas caim rings 0\nRouter# show pas caim dma 0\nRouter# show pas caim compressor 0\nRouter# show pas caim cnxt_table 0\nRouter# show pas caim page_table 0\nRouter# show pas caim stats 0", "desc": "To show debug information about the data compression Advanced Interface Module (CAIM) daughter card, use the showpascaimcommand in user EXEC or privileged EXEC mode. show pas caim {rings | dma | copro" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pas eswitch address", "cmd": "Router# show pas eswitch address fastethernet 3/0", "desc": "To display the Layer 2 learned addresses for an interface, use the showpaseswitchaddress command in user" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pas i82543 interface", "cmd": "Router# show pas i82543 interface fastethernet 6/0 multicast-table\nRouter# show pas i82543 interface fastethernet 6/0 receive-address\nRouter# show pas i82543 interface fastethernet 6/0 statistics", "desc": "To display interface information that is specific to Fast Ethernet or Gigabit Ethernet port adapters with an" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pas isa controller", "cmd": "Router# show pas isa controller", "desc": "To show controller information that is specific to the Virtual Private Network (VPN) accelerator controller when an Integrated Services Adapter (ISA) is installed, use the showpasisacontrollerEXEC com" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pas isa interface", "cmd": "Router# show pas isa interface", "desc": "To display interface information that is specific to the Virtual Private Network (VPN) accelerator card when an Integrated Services Adapter (ISA) is installed, use the showpasisainterfacecommand in pr" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pas vam controller", "cmd": "Router# show pas vam controller", "desc": "To display controller information that is specific to the VPN Acceleration Module (VAM), use the showpasvamcontroller command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pas vam interface", "cmd": "Router# show pas vam interface", "desc": "To display interface information that is specific to the VPN Acceleration Module (VAM), use the showpasvaminterface command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pas y88e8k interface", "cmd": "Router# show pas y88e8k interface gigabit ethernet 1/0 rx-ring", "desc": "To display the y88e8k Port Adaptor Information (pas) message details of a Gigabit Ethernet interface, use the showpasy88e8kinterface command in User EXEC or privileged EXEC mode. show pas y88e8k inter" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pci aim", "cmd": "Router# show pci aim", "desc": "To show the IDPROM contents for each compression Advanced Interface Module (AIM) daughter card in the Cisco 2600 router, use the showpciaimcommand in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform", "cmd": "Router# show platform buffers\nRouter#\nRouter# show platform\nRouter# show platform\nDevice#show platform\nDevice#show platform\nDevice#show platform\nRouter# show platform\nRouter# configure terminal\nRouter(config)# redundancy", "desc": "To display platform information, use the show platform command in privileged EXEC mode. show platform {buffers | copp rate-limit {arp | dhcp | atm-oam | ethernet-oam | icmp | igmp | pppoe-discovery | " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform acl software-switched", "cmd": "Router# show platform acl software-switched", "desc": "To display whether ACLs are enabled for software-switched WAN packets, use the showplatformaclsoftware-switchedcommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform atom disp-tbl backup", "cmd": "Router# show platform atom disp-tbl backup", "desc": "To display the disposition table on the line card for backup VCs, use the showplatformatomdisp-tblbackup command in privileged EXEC mode ." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform atom disp-tbl local-vc-label", "cmd": "Router# show platform atom imp-tbl remote-vc-label 97", "desc": "To display the disposition table on the line card for a VC based local label, use the showplatformatomdisp-tbllocal-vc-label command in privileged EXEC mode ." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform atom imp-tbl backup", "cmd": "Router# show platform atom imp-tbl backup", "desc": "To display the imposition table on the line card for backup VCs, use the showplatformatomimp-tblbackup command in privileged EXEC mode ." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform atom tbl-summary", "cmd": "Router# show platform atom tbl-summary", "desc": "To display the total number of pseudowires (PWs) programmed on the line card., use theshowplatformatomtbl-summary command in privileged EXEC mode ." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform condition", "cmd": "Router# show platform condition", "desc": "To display the currently active debug configuration, use the show platform condition command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform diag", "cmd": "Device# show platform diag\nDevice# show platform diag\nRouter# show platform diag", "desc": "To display diagnostic and debug information about individual platform components, use the show platform diag command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform discover-devices", "cmd": "Router#show platform discover-devices", "desc": "To display PCI device information, use the showplatformdiscover-devicescommand in privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform dwdm alarm history", "cmd": "Router# show platform dwdm alarm history\nRouter# show platform dwdm alarm history 1\nRouter# how platform dwdm alarm history 2\nRouter# show platform dwdm alarm history 3", "desc": "To display platform DWDM alarm history, use the showplatformdwdmalarmhistorycommand in privileged show platform dwdm alarm history [port index]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware capacity", "cmd": "Router# show platform hardware capacity cpu\nRouter#\nRouter# show platform hardware capacity eobc\nRouter#\nRouter# show platform hardware capacity fabric\nRouter#\nRouter# show platform hardware capacity flash\nRouter#\nRouter# show platform hardware capacity forwarding\nRouter#", "desc": "To display the capacities and utilizations for the hardware resources, use the show platform hardware capacity command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware capacity rewrite-engine", "cmd": "Router# show platform hardware capacity rewrite-engine drop\nRouter# show platform hardware capacity rewrite-engine drop\nRouter# show platform hardware capacity rewrite-engine drop slot 1 details\nRouter# show platform hardware capacity rewrite-engine drop slot 5 rate\nRouter# show platform hardware capacity rewrite-engine drop slot 5 rate 20\nRouter# show platform hardware capacity rewrite-engine performance\nRouter# show platform hardware capacity rewrite-engine performance slot 5\nRouter# show platform hardware capacity rewrite-engine performance slot 5 rate", "desc": "To display the packet drop and performance counters of the central rewrite engine on supervisors and line cards, use the show platform hardware capacity rewrite-engine command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware interface", "cmd": "Router# show platform hardware interface gigabitethernet 0/0/0 plim qos input map", "desc": "To display information about an interface, use the showplatformhardwareinterfacecommand in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware network-clocks", "cmd": "Router# show platform hardware network-clocks\nRouter# show platform hardware network-clocks | sec GNSS", "desc": "To display network clocks for an ES+ line card, use the showplatformhardwarenetwork-clockscommand in privileged EXEC mode. show platform hardware network-clocks [bits | zl30138]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware pp active interface all", "cmd": "Router#show platform hardware pp active interface all", "desc": "Interfaces — show platform hardware pp active interface all" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware pp active resource-usage monitor", "cmd": "Router# show platform hardware pp active resource-usage monitor", "desc": "To display the current utilizations and the maximum capacities available in the hardware for various resources, use the show platform hardware pp active resource-usage monitor command in privileged EX" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware qfp active feature cef-mpls urpf", "cmd": "Device# show platform hardware qfp active feature cef-mpls urpf GigabitEthernet 0/0/0.777", "desc": "To confirm and display the hardware information pertaining to Cisco Express Forwarding (CEF) Multiprotocol" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware qfp active feature cef-mpls prefix ip", "cmd": "Router# show platform hardware qfp active feature cef-mpls prefix ip 0.0.0.0/1 vrf\nRouter# show platform hardware qfp active feature cef-mpls prefix ip", "desc": "To display the interface name along with the interface descriptor block (IDB) information, use the showplatformhardwareqfpactivefeaturecef-mplsprefixip command in privileged EXEC. show platform hardwa" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware qfp active feature cef-mpls prefix mpls", "cmd": "Router# show platform hardware qfp active feature cef-mpls prefix mpls 17 exact", "desc": "To display the complete Output Chain Element (OCE) chains used for handling the incoming Multiprotocol" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware qfp active feature multicast", "cmd": "Router# show platform hardware qfp active feature multicast v4mcast 239.1.1.1/32 vrf 2\nRouter# show platform hardware qfp active feature multicast v6mcast FF04::10/128 vrf 503316482", "desc": "To display the complete Output Chain Element (OCE) chains that are connected by each leaf node in the multicast replication tree for a particular output path in the Cisco QuantumFlow Processor (QFP) a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware qfp active infrastructure punt", "cmd": "Router# show platform hardware qfp active infrastructure punt config\nRouter# show platform hardware qfp active infrastructure punt policer\nRouter# show platform hardware qfp active infrastructure punt statistics type per-cause\nRouter# show platform hardware qfp active infrastructure punt statistics type punt-drop", "desc": "To display the hardware and infrastructure information for punt statistics and configuration in an active instance of the Cisco Quantum Flow Processor (QFP), use the show platform hardware qfp active " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware qfp active interface if-name statistics", "cmd": "Router # show platform hardware qfp active GigabitEthernet0/0/0.781 if-name statistics", "desc": "To display the statistics of packet drops for each interface in the Packet Processor Engine (PPE), use the show platform hardware qfp active interface if-name statistics command in privileged EXEC mod" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware qfp statistics drop", "cmd": "Router# show platform hardware qfp active statistics drop\nRouter# show platform hardware qfp active statistics drop", "desc": "To display the statistics of all the dropped packets on the Embedded Services Processor (ESP), use the show platform hardwareqfp active statistics drop command in privileged EXEC mode. show platform h" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware qfp interface", "cmd": "Device# show platform hardware qfp active interface if-name Port-channel1 info\nDevice# show platform hardware qfp active statistics drop\nDevice# show platform hardware qfp active interface if-name GigabitEthernet0/0/0.775\nDevice# show platform hardware qfp active interface if-handle 10 path\nDevice# show platform hardware qfp active interface if-handle 14 path", "desc": "To display information about an interface in the target flow processor, use the show platform hardware qfp interface command in privileged EXEC mode. show platform hardware qfp {active | standby} inte" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware slot", "cmd": "Device# show platform hardware slot 0 eobc interface primary status\nDevice# show platform hardware slot 0 eobc switch statistics brief\nDevice# show platform hardware slot 0 fan status\nDevice# show platform hardware slot 0 plim qos input bandwidth\nDevice# show platform hardware slot 0 plim statistics\nDevice# show platform hardware slot f0 serdes statistics\nDevice# show platform hardware slot f0 serdes statistics\nDevice# show platform hardware slot f0 serdes statistics internal\nDevice# show platform hardware slot f0 serdes statistics internal\nDevice# show platform hardware slot 0 spa oir-statist", "desc": "To display information about the processor in a chassis slot, use the show platform hardware slot command in privileged EXEC or diagnostic mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware throughput crypto", "cmd": "Device# show platform hardware throughput crypto\nDevice# show platform hardware throughput crypto\nDevice# show platform hardware throughput crypto", "desc": "To display throughput information on a physical router, use the show platform hardware throughput crypto command in privileged EXEC mode. The output displays the configured throughput level, indicates" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware throughput level", "cmd": "Router# show platform hardware throughput level", "desc": "To display the current maximum throughput level for a virtual router, use the show platform hardware throughput level command in Privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware subslot", "cmd": "Router# show platform hardware subslot 1/0 plim qos input bandwidth\nRouter# show platform hardware subslot 1/0 plim statistics", "desc": "To display information about a Cisco ASR 1000 Series shared port adapter (SPA), use the showplatformhardwaresubslotcommand in privileged EXEC or diagnostic mode. show platform hardware subslot slot/ca" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware subslot (4400)", "cmd": "Router# show platform hardware subslot 0/1 module host-if status\nRouter# show platform hardware subslot 0/1 module host-if statistics\nRouter# show platform hardware subslot 0/1 module firmware\nRouter# show platform hardware subslot 0/1 module status", "desc": "To display information on the network interface module, use the show platform hardware subslot command in privileged EXEC mode. show platform hardware subslot slot/bay module [ firmware | status | dev" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform hardware transceiver", "cmd": "Router# remote command module 13 show platform hardware transceiver brief 1\nRouter# remote command module 13 show platform hardware transceiver status 1", "desc": "To see transceiver information on a port, use the show platform hardware transceiver command in EXEC show platform hardware transceiver {brief | status | config | error | register} [port]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform isg memory", "cmd": "Router# show platform isg memory", "desc": "To display dynamically allocated memory usage information on the route processor (RP), use the showplatformisgmemorycommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform mgf", "cmd": "Router# show platform mgf\nRouter# show platform mgf module\nRouter# show platform mgf statistics\nRouter# show platform mgf statistics cpu", "desc": "To show the details of the multi-gigabit fabric, use the show platform mgf command in privileged EXEC show platform mgf [module | statistics cpu]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform resources", "cmd": "Router# show platform resources", "desc": "To display information about the utilization of platform resources, such as the Control Processor (CP), Service" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform slot r0 pcie status", "cmd": "Router# show platform slot r0 pcie status", "desc": "To display information about all Peripheral Component Interconnect (PCI) buses on the Route Processor (RP) slot on the Cisco ASR 1000 Series Aggregation Services Router and devices connected to the PC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software agent iomd", "cmd": "show platform software agent iomd", "desc": "To display the packets of High Priority and Low Priority queue in Over Subscription mode, use the show platform software agent iomd command in privileged EXEC mode. show platform software agent iomd i" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software audit", "cmd": "Device# show platform software audit summary\nDevice#sh pla software audit all\nDevice#show platform software audit all | redirect bootflash:audi_123.log\nDevice#dir bootflash:audi_123.log", "desc": "To display the SE Linux Audit logs, use the show platform software audit command in privileged EXEC show platform software audit { all | summary | 0 | 1 | 2 | F0 | R0 | FP active | RP active}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software memory", "cmd": "Router# show platform software memory forwarding-manager r0\nRouter# show platform software memory chassis-manager f0 brief", "desc": "To display memory information for the specified process, use the show platform software memorycommand in privileged EXEC or diagnostic mode. show platform software memory [database | messaging] {chass" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software mount", "cmd": "Router# show platform software mount\nRouter# show platform software mount f0\nRouter# show platform software mount rp active\nRouter# show platform software mount 0 brief", "desc": "To display the mounted file systems, both physical and virtual, for a Cisco ASR 1000 Series SPA Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software infrastructure punt-keepalive", "cmd": "Router# show platform software infrastructure punt-keepalive\nRouter# show platform software infrastructure punt-keepalive", "desc": "To display information about the settings for the platform punt-keepalive command, use the show platform software infrastructure punt-keepalive command in the privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software interface summary", "cmd": "Router# show platform software interface summary\nRouter# show platform software interface summary queues", "desc": "To display a summary of statistics for interfaces that are configured on a networking device, use the show platform software interface summary command in privileged EXEC mode. show platform software i" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software l2pt statistics", "cmd": "show platform software l2pt statistics\nshow platform software l2pt statistics", "desc": "Interfaces — show platform software l2pt statistics" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software process list", "cmd": "Router# show platform software process list 0\nRouter# show platform software process list 0 name sleep\nRouter# show platform software process list 0 process-id 1\nRouter# show platform software process list 0 summary\nRouter#show platform software process list R0 sort memory", "desc": "To display a list of the processes running in a given slot, use the show platform software process listcommand in privileged EXEC or diagnostic mode. show platform software process list slot [name pro" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software process memory", "cmd": "Device# show platform software process memory r0 name smand maps\nDevice# show platform software process memory r0 process-id 1 maps\nDevice# show platform software process memory r0 all\nDevice# show platform software process memory r0 all sorted\nDevice# show platform software process memory r0 all virtual sorted\nDevice# show platform software process memory r0 all rss sorted", "desc": "To display the memory statistics of a platform software process, use the show platform software process memory command in privileged EXEC mode or diagnostic mode. show platform software process memory" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software ptp foreign-master", "cmd": "Router# show platform software ptp foreign-master domain 24", "desc": "To display the PTP foreign-master information, use the show platform software ptp foreign-master command in privileged EXEC mode. show platform software ptp [foreign-master] domain domain-number" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software status control-processor", "cmd": "Router# show platform software status control-processor\nRouter# show platform software status control-processor brief", "desc": "To display status information about the control processors, use the showplatformsoftwarestatuscontrol-processorcommand in privileged EXEC or diagnostic mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software punt-policer", "cmd": "Router# show platform software punt-policer", "desc": "To display the VLAN packets that are sent to the IOS on a Cisco ASR 1000 Router, use the show platform software punt-policer command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform process slot", "cmd": "Router# show platform software process slot 0 monitor cycles 3 interval 2 lines 23", "desc": "To monitor the software-running process in a given slot, use the show platform software process slotcommand in privileged EXEC or diagnostic mode. show platform software process slot slot monitor [cyc" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software tech-support", "cmd": "Router# show platform software tech-support\nRouter# show platform software tech-support file bootflash:tech_support_output.tgz\nRouter# show platform software tech-support file harddisk:tech_support_output.tgz", "desc": "To display system information or create a technical support information tar file for Cisco Technical Support, use the show platform software tech-supportcommand in privileged EXEC or diagnostic mode. " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform software vnic-if interface-mapping", "cmd": "Router# show platform software vnic-if interface-mapping", "desc": "To display the mapping between the virtual Network Interface Cards (vNICs) on the virtual machine (VM) and the network interfaces on the virtual router, use the show platform software vnic-if interfac" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show platform time-source", "cmd": "Router#show platform time-source", "desc": "To display the platform time-source details configured, use the showplatformtime-source command in the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show plim fpga", "cmd": "Router# show plim fpga", "desc": "To display details gathered from the registers of the internal FPGA (Field Programmable Gate Array) located in the PLIM (Physical Layer Interface Module) section of the line card, use the show plim fp" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show policy-map interface", "cmd": "Router# show policy-map interface serial3/1 output\nRouter# show policy-map interface serial3/2 output\nRouter(config)# policy-map prec-aggr-wred\nRouter(config-pmap)# class class-default\nRouter(config-pmap-c)# random-detect aggregate\nRouter(config-pmap-c)# random-detect precedence values 0 1 2 3 minimum thresh 10\nRouter(config-pmap-c)# random-detect precedence values 4 5 minimum-thresh 40 maximum-thresh\nRouter(config-pmap-c)# random-detect precedence values 6 minimum-thresh 60 maximum-thresh\nRouter(config-pmap-c)# random-detect precedence values 7 minimum-thresh 70 maximum-thresh\nRouter(config-p", "desc": "To display the statistics and the configurations of the input and output policies that are attached to an interface, use the show policy-map interface command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show power", "cmd": "Router>\nRouter>\nRouter#\nRouter#\nRouter> show power\nRouter>\nRouter#\nRouter#\nRouter#\nRouter#", "desc": "To display information about the power status, use the show powercommand in user EXEC or privileged show power [ available | inline [ interface number | module number ] | redundancy-mode | status { al" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show power inline", "cmd": "Router#\nRouter# show power inline\nRouter# show power inline gigabitEthernet 0/0/0 detail", "desc": "To display the power status for a specified port or for all ports, use the show power inline command in privileged EXEC mode. show power inline [interface-type slot/port] [actual | configured]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show proc cpu platform", "cmd": "Router#show proc cpu plat sort", "desc": "To display detailed CPU usage statistics for platform processes in relation to the Control Processor (CP)," }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show process | include persis", "cmd": "Router#show process | include persis", "desc": "To verify the validity of the process during alarm history configuration, use the show process | include persis" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show protection-group", "cmd": "show protection-group\nshow protection-group", "desc": "Interfaces — show protection-group" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ptp clock dataset", "cmd": "Device# show ptp clock dataset default\nDevice# show ptp clock dataset current", "desc": "To display a summary of the Precision Time Protocol clock status, use the show ptp clock dataset command in privileged EXEC mode. show ptp clock dataset [default | current]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ptp clock dataset parent", "cmd": "Device# show ptp clock dataset parent", "desc": "To display a description of the Precision Time Protocol parent clock, use the show ptp dataset parent command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ptp clock dataset time-properties", "cmd": "Device# show ptp clock dataset time-properties", "desc": "To display a summary of time properties for a Precision Time Protocol clock, use the show ptp dataset time-properties command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ptp clock running", "cmd": "Device# show ptp clock running", "desc": "To display a summary of the Precision Time Protocol clock status, use the show ptp clock running command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ptp port dataset foreign-master", "cmd": "Device# show ptp dataset foreign-master", "desc": "To display a summary of Precision Time Protocol foreign master records, use the show ptp port dataset foreign-master-record command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ptp port dataset port", "cmd": "Device# show ptp port dataset port", "desc": "To display a summary of Precision Time Protocol ports, use the show ptp port dataset port command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pxf cpu access-lists", "cmd": "Router# show pxf cpu access-lists test_list\nRouter# show pxf cpu access-lists security\nRouter# show pxf cpu access-lists security tcam ICMP_IGMP_MATCH detail\nRouter# show pxf cpu access-lists security", "desc": "To display Parallel eXpress Forwarding (PXF) memory information for access control lists (ACLs), use the show pxf cpu access-lists command in privileged EXEC mode. show pxf cpu access-lists [security " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pxf cpu iedge", "cmd": "Router# show pxf cpu iedge template", "desc": "To display Parallel eXpress Forwarding (PXF) policy and template information, use the show pxf cpu iedgecommand in privileged EXEC mode. show pxf cpu iedge[ detail | policy policy-name | template]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pxf cpu qos", "cmd": "Router# show pxf cpu qos police_test", "desc": "To display Parallel eXpress Forwarding (PXF) External Column Memory (XCM) contents related to a particular policy, use the show pxf cpu qos command in privileged EXEC mode. show pxf cpu qos [policy-ma" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pxf dma", "cmd": "Router# show pxf dma buffers", "desc": "To display the current state of direct memory access (DMA) buffers, error counters, and registers on the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show pxf max-logical-interfaces", "cmd": "Router# show pxf max-logical-interfaces", "desc": "To display the configuration for the maximum number of classes permitted per QoS policy in PXF and the maximum number of PXF logical interfaces allowed on the router, use the showpxfmax-logical-interf" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show qm-sp port-data", "cmd": "Router# show qm-sp port-data 1 2", "desc": "To display information about the QoS-manager switch processor, use the showqm-spport-data command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show rbscp", "cmd": "Router# show rbscp all\nRouter# show rbscp state\nRouter# show rbscp statistics tunnel 0", "desc": "To display state and statistical information about Rate Based Satellite Control Protocol (RBSCP) tunnels, use the showrbscp command in user EXEC or privileged EXEC mode. show rbscp {all | inbound | st" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show redundancy", "cmd": "Router# show redundancy clients\nRouter# show redundancy counters\nRouter# show redundancy history\nRouter# show redundancy states\nRouter> show redundancy switchover\nRouter# terminal length 5\nRouter# show redundancy states\nRouter# show redundancy handover\nRouter# show redundancy states\nRouter# show redundancy", "desc": "To display current or historical status and related information on planned or logged handovers, use the show redundancy command in user EXEC or privileged EXEC mode. show redundancy [clients | counter" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show redundancy (HSA redundancy)", "cmd": "Router# show redundancy", "desc": "To display the current redundancy mode, use the showredundancycommand in user EXEC or privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show redundancy interchassis", "cmd": "Router# show redundancy interchassis 100", "desc": "To display information about interchassis redundancy group configuration, use the show redundancy interchassis command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show redundancy interlink", "cmd": "Router# show redundancy interlink rx bps histogram", "desc": "To display interlink utilization, use the showredundancyinterlinkcommand in user EXEC or privileged show redundancy interlink [rx | tx [pps | bps]] [histogram]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show running configuration | include mode", "cmd": "show running configuration | include mode\nshow running configuration | include mode", "desc": "Interfaces — show running configuration | include mode" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show scp", "cmd": "Router# show scp status\nRouter# show module\nRouter# attach 5\nRouter#", "desc": "To display Switch-Module Configuration Protocol (SCP) information, use the show scp in privileged EXEC mode on the Switch Processor. show scp {accounting | counters | linecards [details] | mcast {grou" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show service-module serial", "cmd": "Router#\nRouter# show service-module serial 0/1\nRouter# show service-module serial 0", "desc": "To display the performance report for an integrated CSU/DSU, use the showservice-moduleserial command in privileged EXEC mode. show service-module serial number [performance-statistics [interval-range" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show sip-disk", "cmd": "Router# show sip5-disk0\nRouter# show sip3-disk0 filesys", "desc": "To display file information on the internal storage disk of the SPA interface processor (SIP), use the showsip-disk command in privileged EXEC configuration mode. show sip slot-disk0 [all | chips | fi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show slot0:", "cmd": "Router# show version\nRouter# show version\nRouter# show slot0:\nRouter# show slot0: all\nRouter# show slot0: chips\nRouter# show slot0: detailed\nRouter# show slot0: err\nRouter# show", "desc": "To display information about the PCMCIA flash memory card’s file system located in slot 0, use the show slot0:command in user EXEC or privileged EXEC mode. show slot0:[all | chips | detailed | err | s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show smf", "cmd": "Router# show smf fastethernet", "desc": "To display the configured software MAC address filter (SMF) on various interfaces of a router, use the showsmfcommand in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show srp", "cmd": "Router# show srp topology\nRouter# show srp ips", "desc": "To display Spatial Reuse Protocol (SRP) information, use the showsrp command in user EXEC or privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show storm-control", "cmd": "Router# show storm-control broadcast\nRouter# show storm-control fastethernet 0/4 history", "desc": "To display switchport characteristics, including storm-control levels set on the interface, use the showstorm-controlcommand in user EXEC or privileged EXEC mode. show storm-control [interface-type in" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show sup-bootflash", "cmd": "Router#\nRouter#\nRouter#\nRouter#\nRouter# show sup-bootflash chips\nRouter#\nRouter# show sup-bootflash filesys\nRouter#", "desc": "To display information about the sup-bootflash file system, use the show sup-bootflash command in privileged show sup-bootflash [all | chips | filesys]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show syscon sdp", "cmd": "Router# show syscon sdp", "desc": "To display information about the Shelf Discovery Protocol (SDP), use the showsysconsdpcommand in privileged EXEC or user EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show system jumbomtu", "cmd": "Router# show system jumbomtu\nRouter#", "desc": "To display the g lobal maximum transmission unit (MTU) setting, use the show system jumbomtu command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tcam counts", "cmd": "Router# show tcam counts\nRouter#", "desc": "To display the Ternary Content Addressable Memory (TCAM) statistics, use the showtcamcounts command in privileged EXEC mode. show tcam counts [detail] [arp | ip | ipv6 | mpls | other] [module number]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tcam interface", "cmd": "Router# show tcam interface\nRouter#\nRouter# show tcam interface\nRouter#", "desc": "To display information about the interface-based Ternary Content Addressable Memory (TCAM), use the showtcaminterface command in privileged EXEC mode. show tcam interface {interface interface-number |" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tcam-mgr subslot", "cmd": "Router# show tcam-mgr subslot 4/0 inst-info\nRouter# show tcam-mgr subslot 4/0 region 0\nRouter# show tcam-mgr subslot 4/0 region 0 statistics\nRouter# show tcam-mgr subslot 4/0 rx-dest-mac table\nRouter# show tcam-mgr subslot 4/0 rx-vlan table\nRouter# show tcam-mgr subslot 4/0 statisitics", "desc": "To display ternary content addressable memory (TCAM) manager information for a SPA, use the showtcam-mgrsubslotcommand in privileged EXEC configuration mode. show tcam-mgr subslot slot/subslot region " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tdm backplane", "cmd": "Router# show tdm backplane", "desc": "To display modem and PRI channel assignments with streams and channels on the modem side as assigned to the unit and channels on the PRI side of the time-division multiplexing (TDM) assignment, use th" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tdm connections", "cmd": "Router# show tdm connections slot 0", "desc": "To display a snapshot of the time-division multiplexing (TDM) bus connection memory in a Cisco access server or to display information about the connection memory programmed on the Mitel TDM chip in a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tdm data", "cmd": "Router# show tdm data", "desc": "To display a snapshot of the time-division multiplexing (TDM) bus data memory in a Cisco access server or to display data memory that is programmed on the Mitel TDM chip in a Cisco 5800 access server," }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tdm detail", "cmd": "Router# show tdm detail 0/0 1/2", "desc": "To display details about a specific time-division mulltiplexing (TDM) channel programmed on the Mitel chip, use the showtdmdetailcommand in privileged EXEC mode. show tdm detail slot-number/device-num" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tdm information", "cmd": "Router# show tdm information motherboard", "desc": "To display information about the specified time-division multiplexing (TDM) device, use the showtdminformationcommand in privileged EXEC mode. show tdm information {motherboard | slot slot-number devi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tdm pool", "cmd": "Router# show tdm pool", "desc": "To display time-division multiplexing (TDM) resources available for a TDM device, use the showtdmpoolcommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tunnel interface", "cmd": "Device# show tunnel interface tunnel 1\nDevice# show tunnel interface", "desc": "To display detailed information for a specified tunnel interface or for all tunnel interfaces, use the show tunnel interface command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show tunnel keys-database tunnel", "cmd": "Device# show tunnel keys-database tunnel 0", "desc": "To display all transmit and receive generic routing encapsulation (GRE) key pairs associated with traffic flows in a tunnel, use the show tunnel keys-database tunnel command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show top counters interface report", "cmd": "Router# show top counters interface report\nRouter#\nRouter# show top counters interface report\nRouter#\nRouter# show top counters interface report\nRouter#", "desc": "To display TopN reports and information, use the showtopcountersinterfacereport command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ucse imc download progress", "cmd": "Router# show ucse 2 imc download progress\nRouter# show ucse 2 imc download progress", "desc": "To display the status of the CIMC firmware download, use the show ucse imc download progress command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ucse imc files", "cmd": "Router# show ucse 2 imc files", "desc": "To display the CIMC installable images that are available on the local file system, use the show ucse imc files command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ucse server boot", "cmd": "Router# show ucse 1 server boot devices\nRouter# show ucse 1 server boot order", "desc": "To display the device types from which the Cisco E-Series Server can boot, the order in which the boot is attempted, or the progress of boot initialization, use the show ucse server boot command from " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ucse server erase device status", "cmd": "Router# ucse 2 server erase device hdd use hdd2\nRouter#\nRouter# show ucse 2 server erase device status", "desc": "To display the status of devices that have been erased, use the show ucs server erase device status command in EXEC mode. show ucse slot server erase device status" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show ucse server raid level", "cmd": "Router# ucse 2 server raid level 1\nRouter# show ucse 2 server raid level", "desc": "To display the current RAID configuration, use the show ucse server raid level command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show upgrade file", "cmd": "show upgrade file\nshow service-module serial through standby port\nshow upgrade fpd file", "desc": "Interfaces — show upgrade file" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show upgrade fpd file", "cmd": "Router# show upgrade fpd file tftp://mytftpserver/myname/myfpdpkg/c7200-fpd-pkg.124-4.XD.pkg\nRouter# show upgrade fpd file disk0:spa-fpd.122-20.S6.pkg\nRouter# show upgrade fpd file tftp://mytftpserver/myfpdpkgd/spa-fpd.122-20.S6.pkg\nRouter# show upgrade fpd file tftp://mytftpserver/myname/myfpdpkg/c7600-fpd-pkg.122-18.SXE.pkg\nRouter# show upgrade fpd file", "desc": "To display the contents of an FPD image package file, enter the showupgradefpdfile command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show upgrade fpd package default", "cmd": "Router# show upgrade fpd package default\nRouter# show upgrade fpd package default\nRouter# show upgrade fpd package default", "desc": "To display which FPD image package is needed for the router to properly support the SPAs or other" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show upgrade fpd progress", "cmd": "Router# show upgrade fpd progress\nRouter# show upgrade fpd progress\nRouter# show upgrade fpd progress", "desc": "To view the progress of an FPD upgrade while an FPD upgrade is taking place, enter the showupgradefpdprogress command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show upgrade fpd table", "cmd": "Router# show upgrade fpd table\nRouter# show upgrade fpd table", "desc": "To view various information used by the Cisco IOS software to manage the FPD image package file, use the showupgradefpdtable command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show upgrade fpga progress", "cmd": "Router# show upgrade fpga progress", "desc": "To display the progress of an FPGA upgrade on a Cisco 7304 router, use the showupgradefpgaprogresscommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show upgrade hw-programmable file", "cmd": "Router# show upgrade hw-programmable file harddisk:asr1000-hw-programmables.xe31.100616.pkg", "desc": "To display the names and versions of individual files in the hw-programmable package file in a Cisco ASR 1000 Series Router, use the showupgradehw-programmablefilecommand in Privileged EXEC configurat" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show upgrade hw-programmable progress", "cmd": "Router# show upgrade hw-programmable progress", "desc": "To display the upgrade progress of the line card-field upgradeable device (LC-FPD) on a Cisco ASR 1000" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show upgrade package default", "cmd": "show upgrade package default\nshow service-module serial through standby port\nshow upgrade progress", "desc": "Interfaces — show upgrade package default" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show upgrade progress", "cmd": "show upgrade progress\nshow service-module serial through standby port\nshow upgrade table", "desc": "Interfaces — show upgrade progress" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show upgrade table", "cmd": "show upgrade table\nshow service-module serial through standby port\nshow vmi neighbors", "desc": "Interfaces — show upgrade table" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show vmi neighbors", "cmd": "Router# show vmi neighbors vmi1\nRouter# show vmi neighbors detail", "desc": "To display information about neighbor connections to the Virtual Multipoint Interface (VMI ), use the showvmineighbors command in User EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Troubleshooting", "title": "show wedged-interfaces", "cmd": "Router# show wedged-interfaces output", "desc": "To display input and output queue wedged interfaces, use the showwedged-interfaces command in user" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "shutdown (controller)", "cmd": "shutdown (controller)\nshutdown\nno shutdown", "desc": "To disable the Channelized T3 Interface Processor (CT3IP) in Cisco 7500 or Cisco 10000 series routers, use the shutdowncommand in controller configuration mode. To restart a disabled CT3IP, use the no" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "shutdown (dwdm)", "cmd": "Router(config)# controller dwdm 1/1\nRouter(config-controller)# shutdown", "desc": "To disable DWDM controller processing, use the shutdown command in controller configuration mode. To bring a DWDM controller back up and enable DWDM controller processing, use theno form of this comma" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "shutdown (interface)", "cmd": "shutdown (interface)\nshutdown\nno shutdown", "desc": "To disable an interface, use the shutdown command in interface configuration mode. To restart a disabled interface, use the noform of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "signaling", "cmd": "Router(config-cem)# signaling\nRouter(config-cem)# signalling 0x0 0x1 101", "desc": "To enable channel-associated signaling (CAS), use the signalingcommand in CEM configuration mode. To disable signaling, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "smt-queue-threshold", "cmd": "Router(config)# smt-queue-threshold 10", "desc": "To set the maximum number of unprocessed FDDI station management (SMT) frames that will be held for processing, use the smt-queue-threshold command in global configuration mode. To restore the queue t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "snmp ifmib ifindex persist", "cmd": "Router(config)# snmp ifmib ifindex persist", "desc": "To globally enable ifIndex values to persist , which will remain constant across reboots, for use by the Simple" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "snmp ifindex clear", "cmd": "Router(config)# snmp-server ifindex persist\nRouter(config)# interface ethernet 0/1\nRouter(config-if)# no snmp ifindex persist\nRouter(config-if)# exit\nRouter(config)# interface ethernet 0/1\nRouter(config-if)# service instance 100 ethernet\nRouter(config-if-srv)# snmp ifindex clear\nRouter(config-if-srv)# exit\nRouter(config)# interface ethernet 0/1\nRouter(config-if)# snmp ifindex clear", "desc": "To clear previously configured Simple Network Management Protocol (SNMP) ifIndex commands issued for a specific interface or a specific service instance, use the snmpifindexclear command in either int" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "snmp-server enable traps netsync", "cmd": "Device# configure terminal\nDevice(config)# snmp-server enable traps netsync\nDevice(config)# end", "desc": "To configure the Simple Network Management Protocol (SNMP) SyncE trap, use thesnmp-serverenabletrapsnetsynccommand in global configuration mode. To disable the SNMP SyncE trap, use the no form of this" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "snmp ifindex persist", "cmd": "Router(config)# interface ethernet 0/1\nRouter(config-if)# snmp ifindex persist\nRouter(config-if)# exit\nRouter(config)# snmp-server ifindex persist\nRouter(config)# interface ethernet 0/1\nRouter(config-if)# no snmp ifindex persist\nRouter(config-if)# exit\nRouter(config)# interface ethernet 0/1\nRouter(config-if)# service instance 100 ethernet\nRouter(config-if-srv)# snmp ifindex persist", "desc": "To enable ifIndex values in the Interfaces MIB (IF-MIB) that persist across reboots (ifIndex persistence) on a specific interface or service instance, use the snmpifindexpersistcommand in either inter" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "snmp-server ifindex persist", "cmd": "Router(config)# snmp-server ifindex persist", "desc": "Interfaces — snmp-server ifindex persist" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "snr margin", "cmd": "Router(config)# controller\nRouter(config-controller)# snr margin\nRouter(config)# controller\nRouter(config-controller)# snr margin", "desc": "To set the signal-to-noise ratio (SNR) on the controller to improve the line stability, use the snrmargin command in controller configuration mode. To reset the SNR to default settings, use the no for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "source-address", "cmd": "Router(config)#\nRouter(config-hub)#\nRouter(config)#\nRouter(config-hub)#", "desc": "To configure source address control on a port on an Ethernet hub of a Cisco 2505 or Cisco 2507 router, use the source-address command in hub configuration mode. To remove a previously defined source a" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "speed", "cmd": "Device# configure terminal\nDevice(config)# interface fastethernet 2/1/1\nDevice(config-if)# speed 10\nDevice(config-if)# duplex auto", "desc": "To configure the speed for a Fast Ethernet or Gigabit Ethernet interface, use the speed command in interface configuration mode. To return to the default configuration, use the no form of this command" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "squelch", "cmd": "squelch\nsquelch {normal | reduced}\nno squelch", "desc": "To extend the Ethernet twisted-pair 10BASE-T capability beyond the standard 100 meters on the Cisco 4000 platform, use the squelch command in interface configuration mode. To restore the default, use " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "sra line", "cmd": "Router(config-controller)# sra line 0\nRouter(config-controller)# no sra", "desc": "To accommodate changes to the total link capacity with the least amount of disruption to communications, use the sra line command in controller configuration mode. To disable seamless rate adaptation," }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "standby port", "cmd": "Router(config)# switch virtual domain 22\nRouter(config)# switch virtual domain 22", "desc": "To defer the activation of a port on the standby chassis during standby recovery, use the standbyport virtual switching system (VSS) mode command. To disable port deferral activation, use the no form " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "sts-1", "cmd": "Router(config)# controller sonet-acr 1\nRouter(config-controller)#", "desc": "To configure the Synchronous Transport Signal (STS) (level)-1 in the SONET hierarchy, use the sts-1 command in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "srp buffer-size", "cmd": "Router(config-if)# srp buffer-size receive high 17", "desc": "To make adjustments to buffer settings on the receive side for different priority traffic, use the srpbuffer-sizecommand in interface configuration mode. To disable buffer size configurations, use the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "srp deficit-round-robin", "cmd": "Router(config)# srp deficit-round-robin input medium deficit 15000", "desc": "To transfer packets from the internal receive buffer to Cisco IOS software, use the srpdeficit-round-robin command in interface configuration mode. To disable the packet transfer, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "srp loopback", "cmd": "Router(config-if)# srp loopback line a", "desc": "To loop the spatial reuse protocol (SRP) interface on an OC-12c DPTIP, use the srploopbackcommand in interfaceconfiguration mode. To remove the loopback, use the no form of this command. srp loopback " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "srp priority-map", "cmd": "Router(config-if)# srp priority-map transmit high 6", "desc": "To set priority mapping for transmitting and receiving packets, use thesrppriority-mapcommand in interface configuration mode. To disable priority mapping u se the no form of this command . srp priori" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "srp random-detect", "cmd": "Router(config-if)# srp random-detect input high exponential-weight 5", "desc": "To configure weighted RED (WRED) parameters on packets received through an spatial reuse protocol (SRP) interface, use the srprandom-detectcommand in interfaceconfiguration mode. To return the value t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "srp shutdown", "cmd": "Router(config-if)# srp shutdown a", "desc": "To disable the spatial reuse protocol (SRP) interface, use the srpshutdown command in interface configuration mode. To restart a disabled interface, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "srp tx-traffic-rate", "cmd": "Router(config-if)# srp tx-traffic-rate 1000", "desc": "To limit the amount of high-priority traffic that the spatial reuse protocol (SRP) interface can handle, use thesrptx-traffic-rate command in interface configuration mode. Use the no form of this comm" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "storm-control", "cmd": "Device(config-if)# storm-control broadcast level 75.67\nDevice(config-if)# storm-control multicast level 87\nDevice(config-if)# storm-control action shutdown\nDevice(config-if)# no storm-control action shutdown\nDevice(config-if)# storm-control action trap\nDevice(config-if)# no storm-control action trap", "desc": "To enable broadcast, multicast, or unicast storm control on a port or to specify the action when a storm occurs on a port, use the storm-control command in interface configuration mode. To disable sto" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "subslot", "cmd": "Router(config)# redundancy\nRouter(config-r-lc)# subslot 5/1\nRouter(config-r-lc)# subslot 6/1", "desc": "To add an IPSec VPN SPA to a Blade Failure Group, use the subslot command in redundancy-linecard configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport", "cmd": "Router(config-if)#no switchport\nRouter(config-if)#\nRouter(config-if)#\nRouter(config-if)# switchport host\nRouter(config-if)#\nRouter(config-if)#\nRouter(config-if)#\nRouter(config-if)#\nRouter#configure terminal\nRouter(config)# interface ucse 1/0/0", "desc": "To put an interface that is in Layer 3 mode into Layer 2 mode for Layer 2 configuration, use the switchport command in interface configuration mode. To put an interface into Layer 3 mode, use the no f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport access vlan", "cmd": "Device(config-if)# switchport\nDevice(config-if)# switchport access vlan 2\nDevice# configure terminal\nDevice(config)# template user-template1\nDevice(config-template)# switchport access vlan 2\nDevice(config-template)# end", "desc": "To set the VLAN when the interface is in access mode, use the switchport access vlan command in interface configuration or template configuration mode. To reset the access-mode VLAN to the appropriate" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport backup", "cmd": "Device(config)# interface GigabitEthernet1/1\nDevice(config-if)# switchport\nDevice(config-if)# switchport backup interface GigabitEthernet1/2\nDevice(config-if)# switchport backup interface GigabitEthernet1/2 preemption delay 100\nDevice(config-if)# end\nDevice# show running interface GigabitEthernet1/1\nDevice# show interfaces switchport backup\nDevice(config)# interface GigabitEthernet1/1\nDevice(config-if)# no switchport backup interface GigabitEthernet1/2 preemption delay\nDevice(config-if)# end", "desc": "To configure an interface as a Flexlink backup interface, use the switchport backup command in interface configuration mode. To disable this configuration, use the no form of this command. switchport " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport block unicast", "cmd": "Router(config-if)# switchport block unicast", "desc": "To prevent the unknown unicast packets from being forwarded, use the switchportblockunicastcommand in interface configuration mode. To allow the unknown unicast packets to be forwarded, use the no for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport capture", "cmd": "Router(config-if)# switchport capture", "desc": "To configure the port to capture VACL-filtered traffic, use the switchportcapturecommand in interface configuration mode. To disable the capture mode on the port, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport dot1q ethertype", "cmd": "switchport dot1q ethertype\nswitchport dot1q ethertype value\nno switchport dot1q ethertype value", "desc": "To specify the EtherType value to be programmed on the interface, use the switchportdot1qethertype command in interface configuration mode. To return to the default settings, use the no form of this c" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport mode", "cmd": "Router#configure terminal\nRouter(config)# interface fastethernet 4/1\nRouter(config-if)#switchport mode access\nRouter#configure terminal\nRouter(config)# interface fastethernet 4/1\nRouter(config-if)#switchport mode trunk\nRouter#configure terminal\nRouter(config)# interface fastethernet 4/1\nRouter(config-if)# switchport mode dynamic desirable\nRouter#configure terminal", "desc": "To set the interface type, use the switchport mode command in interface configuration mode. Use the appropriate no form of this command to reset the mode to the appropriate default mode for the device" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport port-security aging", "cmd": "Router(config-if)# switchport port-security aging time 120\nRouter(config-if)# switchport port-security aging time 2", "desc": "To configure the port security aging , use the switchport port-security aging time command in interface configuration mode . To disable aging, use the no form of this command. switchport port-security" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport port-security mac-address", "cmd": "Router(config-if)# switchport port-security mac-address 1000.2000.3000\nRouter(config-if)# no switchport port-security mac-address 1000.2000.3000\nRouter(config-if)# switchport port-security mac-address sticky\nRouter(config-if)# no switchport port-security mac-address sticky\nRouter(config-if)# switchport port-security mac-address sticky 0000.0000.0001\nRouter(config-if)# no switchport port-security mac-address sticky 0000.0000.0001\nRouter(config-if)# no switchport port-security mac-address\nRouter(config-if)# switch port-security mac-address 0.0.1 vlan voice\nRouter(config-if)# no switchport port-s", "desc": "To add a MAC address to the list of secure MAC addresses, use the switchportport-securitymac-address command. To remove a MAC address from the list of secure MAC addresses, use the no form of this com" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport port-security maximum", "cmd": "Router(config-if)# switchport port-security maximum 5\nRouter(config-if)# switchport port-security maximum 3 vlan 102", "desc": "To set the maximum number of secure MAC addresses on a port, use the switchportport-securitymaximumcommand in interface configuration mode. To return to the default settings, use the no form of this c" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport port-security violation", "cmd": "Router(config-if)# switchport port-security violation restrict\nRouter(config-if)# switchport port-security violation protect\nRouter(config-if)# platform port-security disable traps", "desc": "To set the action to be taken when a security violation is detected, use the switchportport-securityviolation command in interface configuration mode. To return to the default settings, use the no for" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport private-vlan mapping", "cmd": "Router(config-if)#\nRouter(config-if)#\nRouter(config-if)#", "desc": "To define the PVLAN mapping for a promiscuous port, use the switchportprivate-vlanmapping command in interface configuration mode. To clear all mappings from the primary VLAN, use the no form of this " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport protected", "cmd": "Switch(config)# interface gigabitethernet0/3\nSwitch(config-if)# switchport protected", "desc": "Interfaces — switchport protected" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport trunk", "cmd": "Router(config-if)# switchport trunk encapsulation dot1q\nRouter(config-if)#\nRouter(config)# interface ucse 1/0/0\nRouter(config-if)# switchport mode trunk\nRouter(config-if)# switchport trunk allowed vlan 1-2,40,60,1002-1005", "desc": "To set the trunk characteristics when the interface is in trunking mode, use the switchport trunk command in interface configuration mode. To reset all of the trunking characteristics back to the orig" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "switchport voice vlan", "cmd": "Router(config-if)# switchport\nRouter(config-if)# switchport mode access\nRouter(config-if)# switchport access vlan 100\nRouter(config-if)# switchport voice vlan 101\nRouter(config-if)# interface fastethernet5/1\nRouter(config-if)# no switchport voice vlan", "desc": "To configure a voice VLAN on a multiple-VLAN access port, use the switchportvoicevlan command in interface configuration mode. To remove the voice VLAN from the switch port, use the no form of the swi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "sync-restart-delay", "cmd": "Router(config-if)# sync-restart-delay 2000", "desc": "To set the synchronization-restart delay timer to ensure accurate status reporting, use the sync-restart-delay command in interface configuration mode. To disable the synchronization-restart delay tim" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "syscon address", "cmd": "Router# syscon address 10.2.3.4 green", "desc": "To specify the system controller for a managed shelf, use the sysconaddress command in global configuration mode. To stop the management of the shelf by the system controller, use the no form of this " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "syscon shelf-id", "cmd": "Router# syscon shelf-id 5", "desc": "To specify a shelf ID for a managed shelf, use the sysconshelf-idcommand in global configuration mode. To remove the shelf ID, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "syscon source-interface", "cmd": "Router# syscon source-address Ethernet99/1/0", "desc": "To specify the interface to use for the source address in Shelf Discovery Protocol (SDP) packets, use the sysconsource-interfacecommand in global configuration mode. To return to the default source in" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "system flowcontrol bus", "cmd": "Router(config)# system flowcontrol bus auto\nRouter(config)# system flowcontrol bus on", "desc": "To set the FIFO overflow error count, use the system flowcontrol bus command in global configuration mode. To return to the original FIFO threshold settings, use the no form of this command. [default]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "system jumbomtu", "cmd": "Router(config)# system jumbomtu 1550\nRouter(config)# no system jumbomtu", "desc": "To set the maximum size of the Layer 2 and Layer 3 packets, use the system jumbomtu command in global configuration mode. To revert to the default MTU setting, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1", "cmd": "Router(config)# controller\nRouter(config-controller)# t1 1 controller\nRouter(config-controller)# end", "desc": "To create a logical T1 controller from each of the specified time slots of the T3 line, use the t1command in controller configuration mode. To delete the defined logical controller, use the no form of" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 bert", "cmd": "t1 bert", "desc": "To enable or disable a bit error rate tester (BERT) test pattern for a T1 channel on the Channelized T3 Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1/e1 cem-group", "cmd": "Router(config-controller)# t1 1 cem-group 0 unframed\nRouter(config-controller)# e1 1 cem-group 0 unframed", "desc": "To create a circuit emulation (CEM) channel from one or more time slots of a T1/E1 ports on the Channelized" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 clock source", "cmd": "t1 clock source", "desc": "To specify where the clock source is obtained for use by each T1 channel on the Channelized T3 Interface" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 external", "cmd": "t1 external", "desc": "To specify that a T1 channel on the Channelized T3 Interface Processor (CT3IP) in Cisco 7500 series routers is used as an external port so that the T1 channel can be further multiplexed on the Multich" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 fdl ansi", "cmd": "t1 fdl ansi", "desc": "To enable the 1-second transmission of the remote performance reports via the Facility Data Link (FDL) per" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 framing", "cmd": "t1 framing", "desc": "To specify the type of framing used by T1 channels, use thet1framing command in controller configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 linecode", "cmd": "t1 linecode\nt1 channel linecode [ami | b8zs]", "desc": "To specify the type of line coding used by the T1 channels on the Channelized T3 Interface Processor (CT3IP) in Cisco 7500 series routers, use the t1linecodecommand in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 logging-events", "cmd": "Router(config-controller)# t1 1 logging-events\nRouter(config-controller)# t1 1 logging-events detail", "desc": "To print typical T1 controller Up and Down messages on a channelized T3 port adapterin T3 controller, mode.TodisableprintingoftheT1controllerUpandDownmessages,usethenoformofthiscommand." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1/e1 loopback", "cmd": "Router(config-controller)# t1 1 loopback local\nRouter(config-controller)# t1 1 loopback network line\nRouter(config-controller)# e1 1 loopback local", "desc": "To set the loopback method for testing T1, E1, T3 or E3 interface module, use the t1loopback command in controller configuration mode. To remove the existing loopback, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 t1-line-number cem-group", "cmd": "t1 t1-line-number cem-group\nt1 t1-line-number cem-group cem-group-number unframed", "desc": "To create a single Structure-Agnostic TDM over Packet (SAToP) CEM group, use the t1 t1-line-number cem-group command in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 t1-line-number clock source", "cmd": "t1 t1-line-number clock source", "desc": "To specify where the clock source is obtained for use by each T1 channel, use the t1 t1-line-number clock source command in controller configuration mode. t1 t1-line-number clock source {internal | li" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 t1 line-number framing", "cmd": "t1 t1 line-number framing", "desc": "To specify the type of framing used by T1 channels, use the t1 t1-line-number framing command in controller configuration mode. t1 t1-line-number framing {esf | sf | unframed}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 span", "cmd": "Router(config-controller)# t1 1 span minor-warn lcv 20 pcv 10 duration 10 set\nRouter(config-controller)# t1 1 span minor-warn lcv 15 pcv 8 duration 20 clear\nRouter(config-controller)# t1 1 span major-warn lcv 150 pcv 100 duration 80\nRouter(config-controller)# end\nRouter# show running-config | section controller sonet 7/0/0\nRouter(config-controller)# t1 1 span major-warn lcv 100 pcv 70 duration 100 clear\nRouter(config-controller)# end\nRouter# show running-config | section controller sonet 7/0/0\nRouter# debug c10k lnm\nRouter(config-controller)# t1 1 span major-warn lcv 150", "desc": "To enable link noise monitoring on a clear channel T1 link on Cisco 10000 series routers, use the t1span command in controller configuration mode. To disable link noise monitoring, use the no form of " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 span syslog", "cmd": "Router# show controllers t3 7/0/0.1 /5 lnm\nRouter#\nRouter# show controller t3 7/0/0.1 lnm events", "desc": "To generate syslog messages for all the spans on which the link noise monitoring feature is enabled, use the t1spansyslogcommand in controller configuration mode. To disable the generation of syslog m" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 test", "cmd": "t1 test\nno t1 test channel", "desc": "To break out a T1 channel on the Channelized T3 Interface Processor (CT3IP) in Cisco 7500 series routers to the test port for testing, use the t1testcommand in controller configuration mode. To remove" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 timeslot", "cmd": "t1 timeslot\nno t1 channel timeslot", "desc": "To specify the time slots and data rate used on each T1 channel on the Channelized T3 Interface Processor (CT3IP) in Cisco 7500 series routers, use the t1timeslotcommand in controller configuration mo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "t1 yellow", "cmd": "t1 yellow\nt1 channel yellow {detection | generation}\nno t1 channel yellow {detection | generation}", "desc": "To enable detection and generation of yellow alarms for a T1 channel on the Channelized T3 Interface Processor (CT3IP) in Cisco 7500 series routers, use the t1yellowcommand in controller configuration" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tcam priority", "cmd": "Router(config-if)# tcam priority low", "desc": "To prioritize the interfaces for forwarding to software in the event of Ternary Content Addressable Memory (TCAM) entry or label exhaustion, use the tcampriority command interface configuration mode. " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "termination", "cmd": "Router(config-controller)# termination", "desc": "To configure the termination mode of the controller, use the termination command in the controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "test aim eeprom", "cmd": "Router# test aim eeprom", "desc": "To test the data compression Advanced Interface Module (AIM) after it is installed in the Cisco 2600 series router, use the testaimeepromcommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "test cable-diagnostics", "cmd": "Router# test cable-diagnostics tdr interface gigabitethernet2/12\nRouter # test cable-diagnostics tdr interface gigabitethernet2/1", "desc": "To test the condition of 10-Gigabit Ethernet links or copper cables on 48-port 10/100/1000 BASE-T modules, use the testcable-diagnosticscommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "test interface fastethernet", "cmd": "Router# test interface fastethernet 0", "desc": "To test the Fast Ethernet interface by causing the interface to ping itself, use the testinterfacefastethernet command in user EXEC or privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "test platform police get", "cmd": "Router> enable\nRouter# test platform police get", "desc": "To get the IPv6 internal police rate, use the test platform police get command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "test platform debugger rommon", "cmd": "Router# test platform debugger rommon dump\nRouter# test platform debugger rommon unset string\nRouter# test platform debugger rommon get string\nRouter# test platform debugger rommon set string", "desc": "To configure the ROM monitor (ROMMON) variables on a Route Processor (RP) or a Switch Processor (SP), use the test platform debugger rommon command in privileged EXEC mode. test platform debugger romm" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "test platform police ipv6 disable", "cmd": "Router(config)#test platform police ipv6 disable", "desc": "To disable the IPv6 internal policer, use the test platform police ipv6 disable command in privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "test platform police set", "cmd": "Router> enable\nRouter# test platform police set 100000", "desc": "To set the IPv6 internal police rate, use the test platform police set command in privileged EXEC mode. This command does not have a no form." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "test satellite satellite mfg link", "cmd": "Router# test satellite satellite 1/0 mfg link force\nRouter# test satellite satellite 1/0 mfg link normal", "desc": "To force the Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT) to show that the backbone link to the hub is up, even when the link is actually down, use the testsatellitesatellitemfglink com" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "test satellite satellite reset", "cmd": "Router# test satellite satellite 1/0 reset\nRouter# test satellite satellite 1/0 reset hard", "desc": "To reset the Cisco IP VSAT satellite WAN network module (NM-1VSAT-GILAT), use the testsatellitesatellitereset command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "test service-module", "cmd": "Router# test service-module serial 0", "desc": "To perform self-tests on an integrated CSU/DSU serial interface module, such as a 4-wire, 56/64 kbps" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "test trunk", "cmd": "Router# test trunk stm-1 drop rx on E1 2/0.2/1/2", "desc": "To configure the test port on a trunk card, use the testtrunk command in privileged EXEC mode. test trunk stm1 {drop | monitor} {tx | rx} {on | off} e1 controller" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "threshold", "cmd": "threshold", "desc": "To set the path BER threshold values, configure the threshold command in the controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "timeslot", "cmd": "timeslot\ntimeslot start-slot stop-slot\nno timeslot", "desc": "To enable framed mode on a serial interface on a G.703 E1 port adapter, an FSIP, or an E1-G.703/G.704 serial port adapter, use the timeslot command in interface configuration mode. To restore the inte" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "time-properties persist", "cmd": "Device(config)# ptp clock boundary domain 0 hybrid\nRouter(config-ptp-clk)# time-properties persist 600\nRouter(config-ptp-clk)#utc-offset 45 leap-second “01-01-2017 00:00:00” offset 1", "desc": "To configure the time-properties holdover time, use the time-properties persist command in PTP clock configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "transceiver type all", "cmd": "Router(config)# transceiver type all\nRouter(config-xcvr-type)# monitoring interval 500", "desc": "To enable the monitoring of all transceivers via the transceiver type configuration mode, use the transceivertypeall command in global configuration mode. This command does not have the no form." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "transmit-buffers backing-store", "cmd": "transmit-buffers backing-store\nno form of this command.\ntransmit-buffers backing-store\nno transmit-buffers backing-store", "desc": "To buffer short-term traffic bursts that exceed the bandwidth of the output interface, use the transmit-buffersbacking-storecommand in interface configuration mode. To disable this function, use the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "transmit-clock-internal", "cmd": "transmit-clock-internal\ntransmit-clock-internal\nno transmit-clock-internal", "desc": "To enable the internally generated clock on a serial interface on a Cisco 7200 series or Cisco 7500 series router when a DTE does not return a transmit clock, use thetransmit-clock-internal command in" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "transmit-interface", "cmd": "transmit-interface\ntrtransmit-interface commandansmit-interface type number\nno transmit-interface", "desc": "To assign a transmit interface to a receive-only interface, use the transmit-interface command in interface configuration mode. To return to normal duplex Ethernet interfaces, use the no form of this " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "transmitter-delay", "cmd": "transmitter-delay\ntransmitter-delay delay\nno transmitter-delay", "desc": "To specify a minimum dead-time after transmitting a packet, use the transmitter-delaycommand in interface configuration mode. To restore the default, use thenoform of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "transport-mode", "cmd": "Router(config-if)# transport-mode lan\nRouter(config-if)# transport-mode otn otu4 100G", "desc": "To configure a transport mode, use the transport-modecommand in interface configuration mode. To return to the default state, use the no form of this command. transport-mode {lan | wan | otn bit-trans" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "transport ipv4", "cmd": "Router(config-l3vpn-encap-ip)# transport ipv4 source loopback 0", "desc": "To specify IPv4 transport source mode and the transport source interface, use the transportipv4 command in L3 VPN encapsulation configuration mode. To remove the transport source, use the no form of t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ts16", "cmd": "ts16\nts16\nno ts16", "desc": "To control the use of time slot 16 for data on a G.703 E1 interface or on an E1-G.703/G.704 serial port adapter, use the ts16 command in interface configuration mode. To restore the default, use the n" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ttb", "cmd": "Router# configure terminal\nRouter(config)# int serial 5/0/0\nRouter(config-if)# ttb country us\nRouter(config-if)# ttb snode 123\nRouter(config-if)# ttb rnode rn\nRouter(config-if)# ttb x 9\nRouter(config-if)# ttb serial 432", "desc": "To send a trace trail buffer in E3 g832 framing mode, use the ttb command in interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ttl", "cmd": "ttl\nttl value", "desc": "Interfaces — ttl" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tu-ais", "cmd": "tu-ais", "desc": "To enable the SDH device to detect the PDH AIS alarm TU-AIS alarms are generated and detected when the" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tug-2", "cmd": "tug-2", "desc": "Interfaces — tug-2" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tug-2 e1", "cmd": "Router(config)# controller sonet 2/0\nRouter(config-controller)# aug mapping au-4\nRouter(config-ctrlr-tug3)# au-4 1 tug-3 2\nRouter(config-ctrlr-tug3)# tug-2 5 e1 3", "desc": "To create E1 controllers for a specified path under the Tributary Unit group type 2 (TUG-2), use the tug-2e1command in controller configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tug-2 e1 channel-group timeslots", "cmd": "Router(config)# controller sonet 2/0/0\nRouter(config-controller)# framing sdh\nRouter(config-controller)# aug mapping au-4\nRouter(config-controller)# au-4 1 tug-3 2\nRouter(config-ctrlr-tug3)# tug-2 4 e1 1 channel group 15 timeslots 1-5, 20-23\nRouter(config)# controller sonet 2/0\nRouter(config-controller)# framing sdh\nRouter(config-controller)# aug mapping au-3\nRouter(config-controller)# au-3 1\nRouter(config-ctrlr-au3)# tug-2 4 e1 1 channel group 10 timeslots 1-5, 20-23", "desc": "To create a logical channel group on an E1 line that has been mapped to a TUG-3 or AU-3, use the tug-2e1channel-grouptimeslots command in the appropriate configuration mode. To remove a logical channe" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tug-2 e1 clock source", "cmd": "Router(config)# controller sonet 2/0\nRouter(config-controller)# aug mapping au-3\nRouter(config-controller)# au-3 1\nRouter(config-ctrlr-au3)# tug-2 4 e1 1 clock source line\nRouter(config)# controller sonet 2/0/0\nRouter(config-controller)# aug mapping au-4\nRouter(config-controller)# au-4 1 tug-3 2\nRouter(config-ctrlr-tug3)# tug-2 4 e1 1 clock source internal", "desc": "To set the clock source on an E1 line that has been mapped to a TUG-3 or an AU-3, use the tug-2e1clocksourcecommand in the appropriate configuration mode. tug-2 tug-2-number e1 e1-number clock source " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tug-3", "cmd": "tug-3\ntug-3 tug-3 number", "desc": "Interfaces — tug-3" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel bandwidth", "cmd": "tunnel bandwidth\ntunnel bandwidth {receive | transmit} bandwidth\nno tunnel bandwidth", "desc": "To set the transmit bandwidth used by the tunnel interface, use the tunnel bandwidth command in interface configuration mode. To restore the default setting, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel checksum", "cmd": "tunnel checksum\ntunnel checksum\nno tunnel checksum", "desc": "To enable encapsulator-to-decapsulator checksumming of packets on a tunnel interface, use the tunnelchecksumcommand in interface configuration mode. To disable checksumming, use the no form of this co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel mpls-ip-only", "cmd": "Router(config-if)# tunnel mpls-ip-only", "desc": "To copy the inner IP header’s Do Not Fragment bit from the payload into the tunnel packet’s IP header, use the tunnel mpls-ip-only command in the interface configuration mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel destination", "cmd": "Device(config)# interface tunnel0\nDevice(config-if)# tunnel source ethernet0\nDevice(config-if)# tunnel destination 10.108.164.19\nDevice(config-if)# tunnel mode cayman\nDevice(config)# interface tunnel0\nDevice(config-if)# tunnel destination dynamic\nDevice(config-if)# *Nov 22 19:38:28.271: Tunnel notified destination change: dynamic is set\nDevice(config-if)# end\nDevice# show run interface tunnel0\nDevice(config)# interface tunnel0", "desc": "To specify the destination for a tunnel interface, use the tunnel destination command in interface configuration mode. To remove the destination, use the no form of this command. tunnel destination {h" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel endpoint service-policy output", "cmd": "Device(config)# interface tunnel 1\nDevice(config-if)# tunnel source Loopback 0\nDevice(config-if)# tunnel vlan 10, 20\nDevice(config-if)# ip address unnumbered Loopback 0\nDevice(config-if)# tunnel mode ethernet gre ipv4\nDevice(config-if)# tunnel endpoint service-policy output tunnel-qos-policy\nDevice(config-if)# ip subscriber l2-connected\nDevice(config-subscriber)# initiator unclassified mac-address\nDevice(config-subscriber)# initiator dhcp\nDevice(config-subscriber)# exit", "desc": "To configure a Quality of Service (QoS) policy for a tunnel in an output direction, use the tunnel endpoint service-policy output command in configuration interface mode. To remove the QoS policy for " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel entropy", "cmd": "Device> enable\nDevice# configure terminal\nDevice(config)# interface tunnel 21\nDevice(config-if)# tunnel source 10.1.1.1\nDevice(config-if)# tunnel destination 172.168.2.1\nDevice(config-if)# tunnel mode gre ip\nDevice(config-if)# tunnel key 4683\nDevice(config-if)# tunnel entropy\nDevice(config-if)# end\nDevice# show interfaces tunnel 21", "desc": "To achieve load balancing of tunnel packets in a network, use the tunnel entropy command in interface configuration mode. To stop load balancing, use the no form of the command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel key", "cmd": "Device(config-if)# tunnel key 3", "desc": "To enable an ID key for a tunnel interface, use thetunnelkey command in interface configuration mode. To remove the ID key, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel mode", "cmd": "Device(config)# interface tunnel 0\nDevice(config-if)# tunnel source ethernet 0\nDevice(config-if)# tunnel destination 10.108.164.19\nDevice(config-if)# tunnel mode cayman\nDevice(config)# interface tunnel 0\nDevice(config)# mac-address 0000.0000.00001\nDevice(config-if)# ip address 10.1.1.2 255.255.255.0\nDevice(config-if)# tunnel source Loopback0\nDevice(config-if)# tunnel mode gre ipv6\nDevice(config-if)# tunnel vlan 1023", "desc": "To set the encapsulation mode for the tunnel interface, use the tunnel mode command in interface configuration mode. To return to the default mode, use the no form of this command. tunnel mode {aurp |" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel path-mtu-discovery", "cmd": "Router(config)# interface tunnel 0\nRouter(config-if)# tunnel path-mtu-discovery", "desc": "To enable Path MTU Discovery (PMTUD) on a generic routing encapsulation (GRE) or IP-in-IP tunnel interface, use the tunnelpath-mtu-discovery command in interface configuration mode. To disable PMTUD o" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel rbscp ack_split", "cmd": "tunnel rbscp ack_split\ntunnel rbscp ack_split split-size\nno tunnel rbscp ack_split split-size", "desc": "To enable TCP acknowledgement (ACK) splitting for Rate Based Satellite Control Protocol (RBSCP) tunnels, use the tunnelrbscpack_split command in interface configuration mode. To disable TCP acknowledg" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel rbscp delay", "cmd": "tunnel rbscp delay\ntunnel rbscp delay\nno tunnel rbscp delay", "desc": "To enable the Rate Based Satellite Control Protocol (RBSCP) tunnel delay, use the tunnelrbscpdelay command in interface configuration mode. To disable RBSCP tunnel delay, use the no form of this comma" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel rbscp input_drop", "cmd": "tunnel rbscp input_drop\ntunnel rbscp input_drop bw-delay-products\nno tunnel rbscp input_drop", "desc": "To configure the input queue size on a Rate Based Satellite Control Protocol (RBSCP) tunnel, use the tunnelrbscpinput_drop command in interface configuration mode. To restore the default input queue s" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel rbscp long_drop", "cmd": "tunnel rbscp long_drop", "desc": "To allow packets to be dropped that have been queued too long for Rate Based Satellite Control Protocol (RBSCP) tunnel encapsulation, use the tunnelrbscplong_drop command in interface configuration mo" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel rbscp report", "cmd": "tunnel rbscp report", "desc": "To report dropped Rate Based Satellite Control Protocol (RBSCP) packets to the Stream Control Transmission" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel rbscp window_stuff", "cmd": "tunnel rbscp window_stuff", "desc": "To enable TCP window stuffing by increasing the value of the TCP window scale for Rate Based Satellite" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel route-via", "cmd": "Router> enable\nRouter# configure terminal\nRouter(config)# interface tunnel 0\nRouter(config-if)# tunnel route-via ethernet0 mandatory", "desc": "To specify the outgoing interface of the tunnel transport, use the tunnelroute-via command in interface configuration mode. To disable the source address selection, use the no form of this command. tu" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel sequence-datagrams", "cmd": "tunnel sequence-datagrams\ntunnel sequence-datagrams\nno tunnel sequence-datagrams", "desc": "To configure a tunnel interface to drop datagrams that arrive out of order, use the tunnelsequence-datagrams command in interface configuration mode. To disable this function, use the no form of this " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel tos", "cmd": "tunnel tos\ntunnel tos tos-bytes\nno tunnel tos", "desc": "To configure the type of service (ToS) byte value for a tunnel interface, use the tunneltos command in interface configuration mode. To use the payload ToS byte value (if payload protocol is IP) or 0," }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel ttl", "cmd": "tunnel ttl\nno form of this command.\ntunnel destination commandtunnel ttl hop-count\nno tunnel ttl", "desc": "To configure the Time-to-Live (TTL) hop-count value for a tunnel interface, use the tunnelttl command in interface configuration command. To use the payload TTL value (if payload protocol is IP) or 25" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tunnel vrf", "cmd": "Device(config)# interface tunnel0\nDevice(config-if)# ip vrf forwarding vrf1\nDevice(config-if)# ip address 10.3.3.3 255.255.255.0\nDevice(config-if)# tunnel source loop 0\nDevice(config-if)# tunnel destination 10.5.5.5\nDevice(config-if)# tunnel vrf vrf2", "desc": "To associate a VPN routing and forwarding (VRF) instance with a specific tunnel destination, interface, or subinterface, use the tunnel vrf command in global configuration or interface configuration m" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "type STS48c", "cmd": "type STS48c\ntype STS48c", "desc": "Interfaces — type STS48c" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "tx-queue-limit", "cmd": "tx-queue-limit\ntx-queue-limit number", "desc": "To control the number of transmit buffers available to a specified interface on the multiport communications interface (MCI) and serial communications interface (SCI) cards, use the tx-queue-limit com" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse subslot imc password-reset", "cmd": "Router# ucse subslot 1/0 imc password-reset\nRouter#", "desc": "To reset the Cisco Integrated Management Controller (CIMC) password, use the ucse subslot imc password-reset command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse subslot server", "cmd": "Router # hw-module subslot 0/NIM-slot-number reload\nRouter # ucse subslot slot/subslot shutdown\nRouter # hw-module subslot 0/NIM-slot-number stop\nRouter# ucse subslot 1/0 server reload\nRouter#\nRouter# ucse subslot 1/0 server reset\nRouter#\nRouter# ucse subslot 1/0 server start\nRouter#\nRouter# ucse subslot 1/0 server stop", "desc": "To reload, reset, start, or stop the hardware on the server module, use the ucse subslot server command in privileged EXEC mode. ucse subslot slot/subslot server {reload | reset | start | stop}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse subslot server password-reset", "cmd": "Router# ucse subslot 1/0 server password-reset BIOS\nRouter#\nRouter# ucse subslot 1/0 server password-reset RAID\nRouter#", "desc": "To reset the BIOS or RAID password, use the ucse subslot server password-reset command in privileged ucse subslot slot/subslot server password-reset {BIOS | RAID}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse subslot shutdown", "cmd": "Router# ucse subslot 1/0 shutdown\nRouter#", "desc": "To gracefully shut down the server module, use the ucse subslot shutdown command in privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse subslot statistics", "cmd": "Router# ucse subslot 1/0 statistics", "desc": "To display or clear server module statistics, use the ucse subslot statistics command in privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse subslot status", "cmd": "Router# ucse subslot 1/0 status", "desc": "To display configuration information related to the hardware and software on the server module, use the ucse subslot status command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse cmos-reset", "cmd": "Router# ucse 2 cmos-reset\nRouter# ucse subslot 0/3 cmos-reset", "desc": "To reset the BIOS CMOS, use the ucse cmos-reset command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse heartbeat-reset", "cmd": "Router# ucse 2 heartbeat-reset enable", "desc": "To enable or disable Cisco IOS software from rebooting the Cisco E-Series Server when the heartbeat is lost, use the ucse heartbeat-reset command in EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse imc config", "cmd": "Router# ucse 2 imc config save flash0:my-imc-config", "desc": "To save the CIMC configuration to a file on the router’s flash drive or to restore the CIMC configuration from a file on the router’s flash drive, use the ucse imc config command in EXEC mode. ucse sl" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse imc file delete", "cmd": "Router# ucse 2 imc file delete xxxxx.iso", "desc": "To delete the CIMC image file, use the ucse imc file delete command in EXEC mode. The file can be either a .iso or .img file." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse imc file download", "cmd": "Router# ucse 2 imc file download URL http://xxxxx.iso\nRouter# show ucse 2 imc file download progress\nRouter# ucse 2 imc file download abort", "desc": "To download the CIMC image file in the background to an internal storage device, use the ucse imc file download command in EXEC mode. The file must have a .iso file extension. ucse slot imc file downl" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse password-reset", "cmd": "Router# ucse 2 password-reset BIOS\nRouter# ucse subslot 0/3 password-reset BIOS", "desc": "To reset the BIOS, CIMC, or RAID password, use the ucse password-reset command in privileged EXEC" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse server boot", "cmd": "Router# ucse 2 server reload boot url http://path/to/iso\nRouter# show ucse 2 server boot progress\nRouter# ucse 2 server reset boot device HDD\nRouter# show ucse 2 server boot progress\nRouter# ucse 2 server start boot device HDD\nRouter# show ucse 2 server boot progress", "desc": "To reload, reset, or boot the Cisco E-Series Server from a particular URL, use the ucse server boot command in EXEC mode. ucse slot server {reload | reset | start} boot {url url | device device_type} " }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse server boot order", "cmd": "Router# show ucse 2 server boot devices\nRouter# ucse 2 boot order PXE CDROM:USB-CD FDD HDD:RAID-MD0\nRouter# show ucse 2 server boot order", "desc": "To configure the boot order for the Cisco E-Series Server, use the ucse server boot order command in EXEC ucse slot server boot order device_1 [device_2] [device_3] [device_4]" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse server erase device hdd", "cmd": "Router# ucse 2 server erase device hdd use hdd2\nRouter# show ucse 2 server erase device status", "desc": "To erase all existing data from the Cisco E-Series Server hard drive devices (HDDs), use the ucse server erase device hdd command in EXEC mode. ucse slot server erase device hdd {ALL | use device_list" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse server reload boot", "cmd": "Router# ucse 2 server reload boot url http://220.0.0.100/OS/image.iso", "desc": "To boot the Cisco E-Series Server from a particular url or device type, use the ucse server reload boot command in EXEC mode. ucse slot server reload boot {url url | device device_type}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse server reset boot", "cmd": "Router# ucse 2 server reset boot url http://220.0.0.100/OS/image.iso", "desc": "To reset the hardware on the Cisco E-Series Server, use the ucse server reset boot command in EXEC mode. ucse slot server reset boot {url url | device device_type}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse session", "cmd": "Router# ucse 2 session imc clear\nRouter# ucse subslot 0/3 session imc clear", "desc": "To start or close a host or CIMC session, use the ucse session command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse shutdown", "cmd": "Router# ucse 2 shutdown\nRouter# ucse subslot 0/3 shutdown", "desc": "To shut down the system gracefully, use the ucse shutdown command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse server start boot", "cmd": "Router# ucse 2 server start boot url http://220.0.0.100/OS/image.iso", "desc": "To power on the Cisco E-Series Server using the boot option, use the ucse server start boot command in ucse slot server start boot {url url | device device_type}" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse statistics", "cmd": "Router# ucse 2 statistics\nRouter# ucse subslot 0/3 statistics", "desc": "To display or clear the reset and reload server information, use the ucse statistics command in privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse status", "cmd": "Router# ucse 2 status\nRouter# ucse subslot 0/3 status", "desc": "To display configuration information related to the hardware and software of a server, use the ucse status command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "ucse stop", "cmd": "Router# ucse 2 stop\nRouter# ucse subslot 0/3 stop", "desc": "To immediately power down the server, use the ucse stop command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "unidirectional", "cmd": "Router(config-if)# unidirectional send-only\nRouter(config-if)# unidirectional receive-only", "desc": "To configure the software-based UDE, use the unidirectional command in interface configuration mode. To remove the software-based UDE configuration, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "upgrade fpd auto", "cmd": "upgrade fpd auto", "desc": "To configure the router to automatically upgrade the current FPD images on a SPA or any FPD-capable cards when an FPD version incompatibly is detected, enter the upgradefpdauto global configuration co" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "upgrade fpd path", "cmd": "upgrade fpd path", "desc": "To configure the router to search for an FPD image package file in a location other than the default router" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "upgrade fpga", "cmd": "Router# upgrade fpga prompt\nRouter# upgrade fpga force\nRouter# no upgrade fpga", "desc": "To set router behavior regarding handling of FPGA mismatches after FPGA mismatches are detected, use the upgradefpga command in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "upgrade fpga all", "cmd": "Router# upgrade fpga all\nRouter# upgrade fpga all\nRouter# upgrade fpga all", "desc": "To manually start the Field-Programmable Gate Array (FPGA) image update process, use the upgradefpgaallcommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "upgrade hw-module slot", "cmd": "Router# upgrade hw-module slot npe file\nRouter#\nRouter# upgrade hw-module slot 4 file disk0:c7600-fpd-pkg.122-18.SXE.pkg\nRouter#", "desc": "Interfaces — upgrade hw-module slot" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "upgrade hw-module slot fpd file", "cmd": "Router# upgrade hw-module slot npe fpd file\nRouter#\nRouter# upgrade hw-module slot 4\nRouter#", "desc": "To manually upgrade the current FPD image package on a SIP or any FPD-capable cards, use the upgradehw-moduleslotfpdfilecommand in privileged EXEC mode. upgrade hw-module slot {slot | npe} fpd file fi" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "upgrade hw-module subslot", "cmd": "Router# upgrade hw-module subslot 2/0 file disk0:spa_fpd.122-20.S2.pkg\nRouter#", "desc": "Interfaces — upgrade hw-module subslot" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "upgrade hw-module subslot fpd file", "cmd": "Router# upgrade hw-module subslot 2/0 fpd file disk0:spa_fpd.122-20.S2.pkg\nRouter#", "desc": "To manually upgrade the current FPD image package on a SPA, use the upgradehw-modulesubslotfpdfilecommand in privileged EXEC mode." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "upgrade hw-programmable", "cmd": "Router# upgrade hw-programmable cpld filename harddisk: asr1000-hw-programmables.15.01s.pkg", "desc": "To perform a Complex Programmable Logic Device (CPLD) or Field-Programmable Gate Array (FPGA) upgrade on a Cisco ASR 1000 Series Router, use the upgradehw-programmable command in Privileged" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "upgrade rom-monitor default", "cmd": "Router# upgrade rom-monitor rom2 default", "desc": "To configure a particular ROM monitor image as the default ROMmon image, use the upgraderom-monitordefault command in privileged EXEC mode. upgrade rom-monitor {rom0 | rom1 | rom2} default" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "upgrade satellite satellite", "cmd": "Router# upgrade satellite satellite 1/0 9.1.0.1 VSAT_99.06.01.26_Bin.bin", "desc": "To upgrade the firmware of an NM-1VSAT-GILAT network module through TFTP, use the upgradesatellitesatellite command in privileged EXEC mode. upgrade satellite satellite slot/unit tftp-server-address f" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "vectoring", "cmd": "Router(config-controller)#vectoring friendly\nRouter(config-controller)#vectoring none", "desc": "To enable the vectoring mode in C86xVAE platforms, use the vectoring command in controller configuration mode. To restore the default value, use the no form of this command." }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "wanphy flag j1 transmit", "cmd": "Router# config\nRouter(config)# controller wanphy 2/1/0\nRouter(config-controller)# wanphy flag j1 transmit messagefromlocalspa", "desc": "Interfaces — wanphy flag j1 transmit" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "xconnect (CEM)", "cmd": "Router(config-cem)# xconnect 10.0.5.1 0 encapsulation udp\nRouter(config-cem-xconnect)#\nRouter(config-if-cem)# xconnect 10.10.10.10 200 encapsulation mpls\nRouter(config-if-xconnect)#", "desc": "To build one end of a circuit emulation (CEM) connection and to enter CEM xconnect configuration mode, use the xconnect command in CEM configuration mode. To remove any existing CEM connections from t" }, { "os": "ios", "role": "router", "vendor": "Cisco", "cat": "Interfaces", "title": "yellow", "cmd": "yellow\nyellow {generation | detection}", "desc": "To enable generation and detection of yellow alarms, use the yellow command in interface configuration" } ]