Upload folder using huggingface_hub

985c397 verified 9 months ago

15.5 kB

# SPDX-License-Identifier: LGPL-2.1-or-later

# ***************************************************************************
# *   Copyright (c) 2014 Yorik van Havre <yorik@uncreated.net>              *
# *                                                                         *
# *   This file is part of the FreeCAD CAx development system.              *
# *                                                                         *
# *   This program is free software; you can redistribute it and/or modify  *
# *   it under the terms of the GNU Lesser General Public License (LGPL)    *
# *   as published by the Free Software Foundation; either version 2 of     *
# *   the License, or (at your option) any later version.                   *
# *   for detail see the LICENCE text file.                                 *
# *                                                                         *
# *   FreeCAD is distributed in the hope that it will be useful,            *
# *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
# *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
# *   GNU Lesser General Public License for more details.                   *
# *                                                                         *
# *   You should have received a copy of the GNU Library General Public     *
# *   License along with FreeCAD; if not, write to the Free Software        *
# *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
# *   USA                                                                   *
# *                                                                         *
# ***************************************************************************
import FreeCAD

if FreeCAD.GuiUp:
    import FreeCADGui
    from FreeCADGui import Workbench
else:
    # Provide a dummy Workbench class when GUI is not available
    class Workbench:
        pass


FreeCAD.__unit_test__ += ["TestCAMGui"]


class PathCommandGroup:
    def __init__(self, cmdlist, menu, tooltip=None):
        self.cmdlist = cmdlist
        self.menu = menu
        if tooltip is None:
            self.tooltip = menu
        else:
            self.tooltip = tooltip

    def GetCommands(self):
        return tuple(self.cmdlist)

    def GetResources(self):
        return {"MenuText": self.menu, "ToolTip": self.tooltip}

    def IsActive(self):
        if FreeCAD.ActiveDocument is not None:
            for o in FreeCAD.ActiveDocument.Objects:
                if o.Name[:3] == "Job":
                    return True
        return False


class CAMWorkbench(Workbench):
    "CAM workbench"

    def __init__(self):
        self.__class__.Icon = FreeCAD.getResourceDir() + "Mod/CAM/Resources/icons/CAMWorkbench.svg"
        self.__class__.MenuText = "CAM"
        self.__class__.ToolTip = "CAM workbench"

    def Initialize(self):
        global PathCommandGroup

        # Add preferences pages - before loading PathGui to properly order pages of Path group
        import Path.Dressup.Gui.Preferences as PathPreferencesPathDressup
        import Path.Tool.assets.ui.preferences as AssetPreferences
        import Path.Main.Gui.PreferencesJob as PathPreferencesPathJob

        translate = FreeCAD.Qt.translate

        # load the builtin modules
        import Path
        import PathScripts
        import PathGui
        from PySide import QtCore, QtGui

        FreeCADGui.addLanguagePath(":/translations")
        FreeCADGui.addIconPath(":/icons")
        import Path.GuiInit

        from Path.Main.Gui import JobCmd as PathJobCmd
        from Path.Main.Gui import SanityCmd as SanityCmd
        from Path.Tool.toolbit.ui import cmd as PathToolBitCmd
        from Path.Tool.library.ui import cmd as PathToolBitLibraryCmd

        from Path.Tool.camassets import cam_assets

        cam_assets.setup()

        # Check if CAM asset migration is needed for version upgrade
        from Path.Tool.migration.migration import CAMAssetMigrator

        migrator = CAMAssetMigrator()
        migrator.check_migration_needed()

        from PySide.QtCore import QT_TRANSLATE_NOOP

        import PathCommands
        import subprocess
        from packaging.version import Version, parse

        FreeCADGui.addPreferencePage(
            PathPreferencesPathJob.JobPreferencesPage,
            QT_TRANSLATE_NOOP("QObject", "CAM"),
        )
        FreeCADGui.addPreferencePage(
            AssetPreferences.AssetPreferencesPage,
            QT_TRANSLATE_NOOP("QObject", "CAM"),
        )
        FreeCADGui.addPreferencePage(
            PathPreferencesPathDressup.DressupPreferencesPage,
            QT_TRANSLATE_NOOP("QObject", "CAM"),
        )

        Path.GuiInit.Startup()

        # build commands list
        projcmdlist = ["CAM_Job", "CAM_Sanity"]
        postcmdlist = ["CAM_Post", "CAM_PostSelected"]
        toolcmdlist = ["CAM_Inspect", "CAM_SelectLoop", "CAM_OpActiveToggle"]

        simcmdlist = ["CAM_SimulatorGL", "CAM_Simulator"]
        prefs = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/CAM")
        simLegacy = prefs.GetBool("DefaultSimulatorLegacy", False)
        if simLegacy:
            simcmdlist.reverse()

        prepcmdlist = [
            "CAM_Comment",
            "CAM_Stop",
            "CAM_Custom",
            "CAM_Probe",
        ]
        twodopcmdlist = [
            "CAM_Profile",
            "CAM_Pocket_Shape",
            "CAM_MillFacing",
            "CAM_Helix",
            "CAM_Adaptive",
            "CAM_Slot",
        ]
        threedopcmdlist = ["CAM_Pocket3D"]
        engravecmdlist = ["CAM_Engrave", "CAM_Deburr", "CAM_Vcarve"]
        drillingcmdlist = ["CAM_Drilling"]
        modcmdlist = ["CAM_OperationCopy", "CAM_Array", "CAM_SimpleCopy"]
        dressupcmdlist = [
            "CAM_DressupArray",
            "CAM_DressupAxisMap",
            "CAM_DressupPathBoundary",
            "CAM_DressupDogbone",
            "CAM_DressupDragKnife",
            "CAM_DressupLeadInOut",
            "CAM_DressupRampEntry",
            "CAM_DressupTag",
            "CAM_DressupZCorrect",
        ]
        extracmdlist = []
        specialcmdlist = []

        toolcmdlist.extend(PathToolBitLibraryCmd.BarList)
        toolbitcmdlist = PathToolBitLibraryCmd.MenuList

        postcmdgroup = ["CAM_PostTools"]
        FreeCADGui.addCommand(
            "CAM_PostTools",
            PathCommandGroup(
                postcmdlist,
                QT_TRANSLATE_NOOP("CAM_PostTools", "Post process Operations"),
            ),
        )
        simcmdgroup = ["CAM_SimTools"]
        FreeCADGui.addCommand(
            "CAM_SimTools",
            PathCommandGroup(
                simcmdlist,
                QT_TRANSLATE_NOOP("CAM_SimTools", "Simulators"),
            ),
        )
        engravecmdgroup = ["CAM_EngraveTools"]
        FreeCADGui.addCommand(
            "CAM_EngraveTools",
            PathCommandGroup(
                engravecmdlist,
                QT_TRANSLATE_NOOP("CAM_EngraveTools", "Engraving Operations"),
            ),
        )
        if Path.Preferences.experimentalFeaturesEnabled():
            drillingcmdlist.append("CAM_Tapping")

        if set(["CAM_Drilling", "CAM_Tapping"]).issubset(drillingcmdlist):
            drillingcmdgroup = ["CAM_DrillingTools"]
            FreeCADGui.addCommand(
                "CAM_DrillingTools",
                PathCommandGroup(
                    drillingcmdlist,
                    QT_TRANSLATE_NOOP("CAM_DrillingTools", "Drilling Operations"),
                ),
            )
        else:
            drillingcmdgroup = drillingcmdlist

        dressupcmdgroup = ["CAM_DressupTools"]
        FreeCADGui.addCommand(
            "CAM_DressupTools",
            PathCommandGroup(
                dressupcmdlist,
                QT_TRANSLATE_NOOP("CAM_DressupTools", "Dressup Operations"),
            ),
        )
        threedcmdgroup = threedopcmdlist
        if Path.Preferences.experimentalFeaturesEnabled():
            prepcmdlist.append("CAM_PathShapeTC")
            extracmdlist.extend(["CAM_Area", "CAM_Area_Workplane"])
            specialcmdlist.append("CAM_ThreadMilling")
            twodopcmdlist.append("CAM_Slot")

        if Path.Preferences.advancedOCLFeaturesEnabled():
            try:
                r = subprocess.run(
                    ["camotics", "--version"], capture_output=True, text=True
                ).stderr.strip()
                v = parse(r)

                if v >= Version("1.2.2"):
                    toolcmdlist.append("CAM_Camotics")
            except (FileNotFoundError, ModuleNotFoundError):
                pass
            except subprocess.CalledProcessError as e:
                print(f"Failed to execute camotics command: {e}")
            except ValueError as ve:
                print(f"Version error: {ve}")
            except Exception as ex:
                print(f"An unexpected error occurred: {ex}")

            try:
                try:
                    import ocl  # pylint: disable=unused-variable
                except ImportError:
                    import opencamlib as ocl
                from Path.Op.Gui import Surface
                from Path.Op.Gui import Waterline

                threedopcmdlist.extend(["CAM_Surface", "CAM_Waterline"])
                threedcmdgroup = ["CAM_3dTools"]
                FreeCADGui.addCommand(
                    "CAM_3dTools",
                    PathCommandGroup(
                        threedopcmdlist,
                        QT_TRANSLATE_NOOP("CAM_3dTools", "3D Operations"),
                    ),
                )
            except ImportError:
                if not Path.Preferences.suppressOpenCamLibWarning():
                    FreeCAD.Console.PrintError("OpenCamLib is not working!\n")

        self.appendToolbar(
            QT_TRANSLATE_NOOP("Workbench", "Project Setup"),
            projcmdlist + postcmdgroup,
        )
        self.appendToolbar(
            QT_TRANSLATE_NOOP("Workbench", "Tool Commands"),
            simcmdgroup + toolcmdlist,
        )
        self.appendToolbar(
            QT_TRANSLATE_NOOP("Workbench", "New Operations"),
            twodopcmdlist + drillingcmdgroup + engravecmdgroup + threedcmdgroup,
        )
        self.appendToolbar(
            QT_TRANSLATE_NOOP("Workbench", "Path Modification"), modcmdlist + dressupcmdgroup
        )
        if extracmdlist:
            self.appendToolbar(QT_TRANSLATE_NOOP("Workbench", "Helpful Tools"), extracmdlist)

        self.appendMenu(
            [QT_TRANSLATE_NOOP("Workbench", "&CAM")],
            projcmdlist
            + postcmdlist
            + ["CAM_ExportTemplate", "Separator"]
            + simcmdlist
            + toolcmdlist
            + toolbitcmdlist
            + ["Separator"]
            + twodopcmdlist
            + drillingcmdlist
            + engravecmdlist
            + ["Separator"]
            + threedopcmdlist
            + ["Separator"],
        )
        self.appendMenu(
            [
                QT_TRANSLATE_NOOP("Workbench", "&CAM"),
                QT_TRANSLATE_NOOP("Workbench", "Path Dressup"),
            ],
            dressupcmdlist,
        )
        self.appendMenu(
            [
                QT_TRANSLATE_NOOP("Workbench", "&CAM"),
                QT_TRANSLATE_NOOP("Workbench", "Supplemental Commands"),
            ],
            prepcmdlist,
        )
        self.appendMenu(
            [
                QT_TRANSLATE_NOOP("Workbench", "&CAM"),
                QT_TRANSLATE_NOOP("Workbench", "Path Modification"),
            ],
            modcmdlist,
        )
        if specialcmdlist:
            self.appendMenu(
                [
                    QT_TRANSLATE_NOOP("Workbench", "&CAM"),
                    QT_TRANSLATE_NOOP("Workbench", "Specialty Operations"),
                ],
                specialcmdlist,
            )
        if extracmdlist:
            self.appendMenu([QT_TRANSLATE_NOOP("Workbench", "&CAM")], extracmdlist)

        self.appendMenu([QT_TRANSLATE_NOOP("Workbench", "&CAM")], ["Separator"])
        self.appendMenu(
            [
                QT_TRANSLATE_NOOP("Workbench", "&CAM"),
                QT_TRANSLATE_NOOP("Workbench", "Utils"),
            ],
            ["CAM_PropertyBag"],
        )

        self.dressupcmds = dressupcmdlist

        curveAccuracy = Path.Preferences.defaultLibAreaCurveAccuracy()
        if curveAccuracy:
            Path.Area.setDefaultParams(Accuracy=curveAccuracy)

        # keep this one the last entry in the preferences
        import Path.Base.Gui.PreferencesAdvanced as PathPreferencesAdvanced
        from Path.Preferences import preferences

        FreeCADGui.addPreferencePage(
            PathPreferencesAdvanced.AdvancedPreferencesPage,
            QT_TRANSLATE_NOOP("QObject", "CAM"),
        )
        Log("Loading CAM workbench... done\n")

    def GetClassName(self):
        return "Gui::PythonWorkbench"

    def Activated(self):
        # update the translation engine
        FreeCADGui.updateLocale()
        # Msg("CAM workbench activated\n")

    def Deactivated(self):
        # Msg("CAM workbench deactivated\n")
        pass

    def ContextMenu(self, recipient):
        import PathScripts

        menuAppended = False
        selection = FreeCADGui.Selection.getSelection()
        if len(selection) == 1:
            obj = selection[0]
            selectedName = obj.Name
            if obj.isDerivedFrom("Path::Feature"):
                self.appendContextMenu("", "Separator")
                self.appendContextMenu("", ["CAM_Inspect"])
                if "Remote" in selectedName:
                    self.appendContextMenu("", ["Refresh_Path"])
                if "Job" in selectedName:
                    self.appendContextMenu("", ["CAM_ExportTemplate"])
                menuAppended = True
            if isinstance(obj.Proxy, Path.Op.Base.ObjectOp):
                self.appendContextMenu("", ["CAM_OperationCopy", "CAM_OpActiveToggle"])
                if hasattr(obj, "StartPoint"):
                    self.appendContextMenu("", ["CAM_SetStartPoint"])
                menuAppended = True
            if obj.isDerivedFrom("Path::Feature"):
                if (
                    "Profile" in selectedName
                    or "Contour" in selectedName
                    or "Dressup" in selectedName
                    or "Pocket" in selectedName
                ):
                    self.appendContextMenu("", "Separator")
                    # self.appendContextMenu("", ["Set_StartPoint"])
                    # self.appendContextMenu("", ["Set_EndPoint"])
                    for cmd in self.dressupcmds:
                        self.appendContextMenu("Dressup", [cmd])
                    menuAppended = True
            if isinstance(obj.Proxy, Path.Tool.ToolBit):
                self.appendContextMenu("", ["CAM_ToolBitSave", "CAM_ToolBitSaveAs"])
                menuAppended = True

        if selection:
            for obj in selection:
                if not obj.isDerivedFrom("Path::Feature"):
                    break
            else:
                self.appendContextMenu("", ["CAM_Post", "CAM_PostSelected"])

        if menuAppended:
            self.appendContextMenu("", "Separator")


Gui.addWorkbench(CAMWorkbench())

FreeCAD.addImportType(
    "GCode (*.nc *.NC *.gc *.GC *.ncc *.NCC *.ngc *.NGC *.cnc *.CNC *.tap *.TAP *.gcode *.GCODE)",
    "PathGui",
)

	# SPDX-License-Identifier: LGPL-2.1-or-later

	# ***************************************************************************
	# * Copyright (c) 2014 Yorik van Havre <yorik@uncreated.net> *
	# * *
	# * This file is part of the FreeCAD CAx development system. *
	# * *
	# * This program is free software; you can redistribute it and/or modify *
	# * it under the terms of the GNU Lesser General Public License (LGPL) *
	# * as published by the Free Software Foundation; either version 2 of *
	# * the License, or (at your option) any later version. *
	# * for detail see the LICENCE text file. *
	# * *
	# * FreeCAD is distributed in the hope that it will be useful, *
	# * but WITHOUT ANY WARRANTY; without even the implied warranty of *
	# * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
	# * GNU Lesser General Public License for more details. *
	# * *
	# * You should have received a copy of the GNU Library General Public *
	# * License along with FreeCAD; if not, write to the Free Software *
	# * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 *
	# * USA *
	# * *
	# ***************************************************************************
	import FreeCAD

	if FreeCAD.GuiUp:
	import FreeCADGui
	from FreeCADGui import Workbench
	else:
	# Provide a dummy Workbench class when GUI is not available
	class Workbench:
	pass


	FreeCAD.__unit_test__ += ["TestCAMGui"]


	class PathCommandGroup:
	def __init__(self, cmdlist, menu, tooltip=None):
	self.cmdlist = cmdlist
	self.menu = menu
	if tooltip is None:
	self.tooltip = menu
	else:
	self.tooltip = tooltip

	def GetCommands(self):
	return tuple(self.cmdlist)

	def GetResources(self):
	return {"MenuText": self.menu, "ToolTip": self.tooltip}

	def IsActive(self):
	if FreeCAD.ActiveDocument is not None:
	for o in FreeCAD.ActiveDocument.Objects:
	if o.Name[:3] == "Job":
	return True
	return False


	class CAMWorkbench(Workbench):
	"CAM workbench"

	def __init__(self):
	self.__class__.Icon = FreeCAD.getResourceDir() + "Mod/CAM/Resources/icons/CAMWorkbench.svg"
	self.__class__.MenuText = "CAM"
	self.__class__.ToolTip = "CAM workbench"

	def Initialize(self):
	global PathCommandGroup

	# Add preferences pages - before loading PathGui to properly order pages of Path group
	import Path.Dressup.Gui.Preferences as PathPreferencesPathDressup
	import Path.Tool.assets.ui.preferences as AssetPreferences
	import Path.Main.Gui.PreferencesJob as PathPreferencesPathJob

	translate = FreeCAD.Qt.translate

	# load the builtin modules
	import Path
	import PathScripts
	import PathGui
	from PySide import QtCore, QtGui

	FreeCADGui.addLanguagePath(":/translations")
	FreeCADGui.addIconPath(":/icons")
	import Path.GuiInit

	from Path.Main.Gui import JobCmd as PathJobCmd
	from Path.Main.Gui import SanityCmd as SanityCmd
	from Path.Tool.toolbit.ui import cmd as PathToolBitCmd
	from Path.Tool.library.ui import cmd as PathToolBitLibraryCmd

	from Path.Tool.camassets import cam_assets

	cam_assets.setup()

	# Check if CAM asset migration is needed for version upgrade
	from Path.Tool.migration.migration import CAMAssetMigrator

	migrator = CAMAssetMigrator()
	migrator.check_migration_needed()

	from PySide.QtCore import QT_TRANSLATE_NOOP

	import PathCommands
	import subprocess
	from packaging.version import Version, parse

	FreeCADGui.addPreferencePage(
	PathPreferencesPathJob.JobPreferencesPage,
	QT_TRANSLATE_NOOP("QObject", "CAM"),
	)
	FreeCADGui.addPreferencePage(
	AssetPreferences.AssetPreferencesPage,
	QT_TRANSLATE_NOOP("QObject", "CAM"),
	)
	FreeCADGui.addPreferencePage(
	PathPreferencesPathDressup.DressupPreferencesPage,
	QT_TRANSLATE_NOOP("QObject", "CAM"),
	)

	Path.GuiInit.Startup()

	# build commands list
	projcmdlist = ["CAM_Job", "CAM_Sanity"]
	postcmdlist = ["CAM_Post", "CAM_PostSelected"]
	toolcmdlist = ["CAM_Inspect", "CAM_SelectLoop", "CAM_OpActiveToggle"]

	simcmdlist = ["CAM_SimulatorGL", "CAM_Simulator"]
	prefs = FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/CAM")
	simLegacy = prefs.GetBool("DefaultSimulatorLegacy", False)
	if simLegacy:
	simcmdlist.reverse()

	prepcmdlist = [
	"CAM_Comment",
	"CAM_Stop",
	"CAM_Custom",
	"CAM_Probe",
	]
	twodopcmdlist = [
	"CAM_Profile",
	"CAM_Pocket_Shape",
	"CAM_MillFacing",
	"CAM_Helix",
	"CAM_Adaptive",
	"CAM_Slot",
	]
	threedopcmdlist = ["CAM_Pocket3D"]
	engravecmdlist = ["CAM_Engrave", "CAM_Deburr", "CAM_Vcarve"]
	drillingcmdlist = ["CAM_Drilling"]
	modcmdlist = ["CAM_OperationCopy", "CAM_Array", "CAM_SimpleCopy"]
	dressupcmdlist = [
	"CAM_DressupArray",
	"CAM_DressupAxisMap",
	"CAM_DressupPathBoundary",
	"CAM_DressupDogbone",
	"CAM_DressupDragKnife",
	"CAM_DressupLeadInOut",
	"CAM_DressupRampEntry",
	"CAM_DressupTag",
	"CAM_DressupZCorrect",
	]
	extracmdlist = []
	specialcmdlist = []

	toolcmdlist.extend(PathToolBitLibraryCmd.BarList)
	toolbitcmdlist = PathToolBitLibraryCmd.MenuList

	postcmdgroup = ["CAM_PostTools"]
	FreeCADGui.addCommand(
	"CAM_PostTools",
	PathCommandGroup(
	postcmdlist,
	QT_TRANSLATE_NOOP("CAM_PostTools", "Post process Operations"),
	),
	)
	simcmdgroup = ["CAM_SimTools"]
	FreeCADGui.addCommand(
	"CAM_SimTools",
	PathCommandGroup(
	simcmdlist,
	QT_TRANSLATE_NOOP("CAM_SimTools", "Simulators"),
	),
	)
	engravecmdgroup = ["CAM_EngraveTools"]
	FreeCADGui.addCommand(
	"CAM_EngraveTools",
	PathCommandGroup(
	engravecmdlist,
	QT_TRANSLATE_NOOP("CAM_EngraveTools", "Engraving Operations"),
	),
	)
	if Path.Preferences.experimentalFeaturesEnabled():
	drillingcmdlist.append("CAM_Tapping")

	if set(["CAM_Drilling", "CAM_Tapping"]).issubset(drillingcmdlist):
	drillingcmdgroup = ["CAM_DrillingTools"]
	FreeCADGui.addCommand(
	"CAM_DrillingTools",
	PathCommandGroup(
	drillingcmdlist,
	QT_TRANSLATE_NOOP("CAM_DrillingTools", "Drilling Operations"),
	),
	)
	else:
	drillingcmdgroup = drillingcmdlist

	dressupcmdgroup = ["CAM_DressupTools"]
	FreeCADGui.addCommand(
	"CAM_DressupTools",
	PathCommandGroup(
	dressupcmdlist,
	QT_TRANSLATE_NOOP("CAM_DressupTools", "Dressup Operations"),
	),
	)
	threedcmdgroup = threedopcmdlist
	if Path.Preferences.experimentalFeaturesEnabled():
	prepcmdlist.append("CAM_PathShapeTC")
	extracmdlist.extend(["CAM_Area", "CAM_Area_Workplane"])
	specialcmdlist.append("CAM_ThreadMilling")
	twodopcmdlist.append("CAM_Slot")

	if Path.Preferences.advancedOCLFeaturesEnabled():
	try:
	r = subprocess.run(
	["camotics", "--version"], capture_output=True, text=True
	).stderr.strip()
	v = parse(r)

	if v >= Version("1.2.2"):
	toolcmdlist.append("CAM_Camotics")
	except (FileNotFoundError, ModuleNotFoundError):
	pass
	except subprocess.CalledProcessError as e:
	print(f"Failed to execute camotics command: {e}")
	except ValueError as ve:
	print(f"Version error: {ve}")
	except Exception as ex:
	print(f"An unexpected error occurred: {ex}")

	try:
	try:
	import ocl # pylint: disable=unused-variable
	except ImportError:
	import opencamlib as ocl
	from Path.Op.Gui import Surface
	from Path.Op.Gui import Waterline

	threedopcmdlist.extend(["CAM_Surface", "CAM_Waterline"])
	threedcmdgroup = ["CAM_3dTools"]
	FreeCADGui.addCommand(
	"CAM_3dTools",
	PathCommandGroup(
	threedopcmdlist,
	QT_TRANSLATE_NOOP("CAM_3dTools", "3D Operations"),
	),
	)
	except ImportError:
	if not Path.Preferences.suppressOpenCamLibWarning():
	FreeCAD.Console.PrintError("OpenCamLib is not working!\n")

	self.appendToolbar(
	QT_TRANSLATE_NOOP("Workbench", "Project Setup"),
	projcmdlist + postcmdgroup,
	)
	self.appendToolbar(
	QT_TRANSLATE_NOOP("Workbench", "Tool Commands"),
	simcmdgroup + toolcmdlist,
	)
	self.appendToolbar(
	QT_TRANSLATE_NOOP("Workbench", "New Operations"),
	twodopcmdlist + drillingcmdgroup + engravecmdgroup + threedcmdgroup,
	)
	self.appendToolbar(
	QT_TRANSLATE_NOOP("Workbench", "Path Modification"), modcmdlist + dressupcmdgroup
	)
	if extracmdlist:
	self.appendToolbar(QT_TRANSLATE_NOOP("Workbench", "Helpful Tools"), extracmdlist)

	self.appendMenu(
	[QT_TRANSLATE_NOOP("Workbench", "&CAM")],
	projcmdlist
	+ postcmdlist
	+ ["CAM_ExportTemplate", "Separator"]
	+ simcmdlist
	+ toolcmdlist
	+ toolbitcmdlist
	+ ["Separator"]
	+ twodopcmdlist
	+ drillingcmdlist
	+ engravecmdlist
	+ ["Separator"]
	+ threedopcmdlist
	+ ["Separator"],
	)
	self.appendMenu(
	[
	QT_TRANSLATE_NOOP("Workbench", "&CAM"),
	QT_TRANSLATE_NOOP("Workbench", "Path Dressup"),
	],
	dressupcmdlist,
	)
	self.appendMenu(
	[
	QT_TRANSLATE_NOOP("Workbench", "&CAM"),
	QT_TRANSLATE_NOOP("Workbench", "Supplemental Commands"),
	],
	prepcmdlist,
	)
	self.appendMenu(
	[
	QT_TRANSLATE_NOOP("Workbench", "&CAM"),
	QT_TRANSLATE_NOOP("Workbench", "Path Modification"),
	],
	modcmdlist,
	)
	if specialcmdlist:
	self.appendMenu(
	[
	QT_TRANSLATE_NOOP("Workbench", "&CAM"),
	QT_TRANSLATE_NOOP("Workbench", "Specialty Operations"),
	],
	specialcmdlist,
	)
	if extracmdlist:
	self.appendMenu([QT_TRANSLATE_NOOP("Workbench", "&CAM")], extracmdlist)

	self.appendMenu([QT_TRANSLATE_NOOP("Workbench", "&CAM")], ["Separator"])
	self.appendMenu(
	[
	QT_TRANSLATE_NOOP("Workbench", "&CAM"),
	QT_TRANSLATE_NOOP("Workbench", "Utils"),
	],
	["CAM_PropertyBag"],
	)

	self.dressupcmds = dressupcmdlist

	curveAccuracy = Path.Preferences.defaultLibAreaCurveAccuracy()
	if curveAccuracy:
	Path.Area.setDefaultParams(Accuracy=curveAccuracy)

	# keep this one the last entry in the preferences
	import Path.Base.Gui.PreferencesAdvanced as PathPreferencesAdvanced
	from Path.Preferences import preferences

	FreeCADGui.addPreferencePage(
	PathPreferencesAdvanced.AdvancedPreferencesPage,
	QT_TRANSLATE_NOOP("QObject", "CAM"),
	)
	Log("Loading CAM workbench... done\n")

	def GetClassName(self):
	return "Gui::PythonWorkbench"

	def Activated(self):
	# update the translation engine
	FreeCADGui.updateLocale()
	# Msg("CAM workbench activated\n")

	def Deactivated(self):
	# Msg("CAM workbench deactivated\n")
	pass

	def ContextMenu(self, recipient):
	import PathScripts

	menuAppended = False
	selection = FreeCADGui.Selection.getSelection()
	if len(selection) == 1:
	obj = selection[0]
	selectedName = obj.Name
	if obj.isDerivedFrom("Path::Feature"):
	self.appendContextMenu("", "Separator")
	self.appendContextMenu("", ["CAM_Inspect"])
	if "Remote" in selectedName:
	self.appendContextMenu("", ["Refresh_Path"])
	if "Job" in selectedName:
	self.appendContextMenu("", ["CAM_ExportTemplate"])
	menuAppended = True
	if isinstance(obj.Proxy, Path.Op.Base.ObjectOp):
	self.appendContextMenu("", ["CAM_OperationCopy", "CAM_OpActiveToggle"])
	if hasattr(obj, "StartPoint"):
	self.appendContextMenu("", ["CAM_SetStartPoint"])
	menuAppended = True
	if obj.isDerivedFrom("Path::Feature"):
	if (
	"Profile" in selectedName
	or "Contour" in selectedName
	or "Dressup" in selectedName
	or "Pocket" in selectedName
	):
	self.appendContextMenu("", "Separator")
	# self.appendContextMenu("", ["Set_StartPoint"])
	# self.appendContextMenu("", ["Set_EndPoint"])
	for cmd in self.dressupcmds:
	self.appendContextMenu("Dressup", [cmd])
	menuAppended = True
	if isinstance(obj.Proxy, Path.Tool.ToolBit):
	self.appendContextMenu("", ["CAM_ToolBitSave", "CAM_ToolBitSaveAs"])
	menuAppended = True

	if selection:
	for obj in selection:
	if not obj.isDerivedFrom("Path::Feature"):
	break
	else:
	self.appendContextMenu("", ["CAM_Post", "CAM_PostSelected"])

	if menuAppended:
	self.appendContextMenu("", "Separator")


	Gui.addWorkbench(CAMWorkbench())

	FreeCAD.addImportType(
	"GCode (.nc .NC .gc .GC .ncc .NCC .ngc .NGC .cnc .CNC .tap .TAP .gcode .GCODE)",
	"PathGui",
	)