Upload folder using huggingface_hub

985c397 verified 9 months ago

20.9 kB

# **************************************************************************
#   Copyright (c) 2017 Kurt Kremitzki <kkremitzki@gmail.com>              *
#                                                                         *
#   This file is part of the FreeCAD CAx development system.              *
#                                                                         *
#   This program is free software; you can redistribute it and/or modify  *
#   it under the terms of the GNU Lesser General Public License (LGPL)    *
#   as published by the Free Software Foundation; either version 2 of     *
#   the License, or (at your option) any later version.                   *
#   for detail see the LICENCE text file.                                 *
#                                                                         *
#   FreeCAD is distributed in the hope that it will be useful,            *
#   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
#   GNU Library General Public License for more details.                  *
#                                                                         *
#   You should have received a copy of the GNU Library General Public     *
#   License along with FreeCAD; if not, write to the Free Software        *
#   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  *
#   USA                                                                   *
# **************************************************************************
from math import pi
import unittest

import FreeCAD
import TestSketcherApp

App = FreeCAD


class TestHole(unittest.TestCase):
    def setUp(self):
        self.Doc = FreeCAD.newDocument("PartDesignTestHole")
        self.Body = self.Doc.addObject("PartDesign::Body", "Body")
        self.Box = self.Doc.addObject("PartDesign::AdditiveBox", "Box")
        self.Box.Length = 10
        self.Box.Width = 10
        self.Box.Height = 10
        self.Body.addObject(self.Box)
        self.Doc.recompute()
        self.HoleSketch = self.Doc.addObject("Sketcher::SketchObject", "SketchHole")
        self.HoleSketch.AttachmentSupport = (self.Doc.XY_Plane, [""])
        self.HoleSketch.MapMode = "FlatFace"
        self.HoleSketch.MapReversed = True
        self.Body.addObject(self.HoleSketch)
        TestSketcherApp.CreateCircleSketch(self.HoleSketch, (-5, 5), 1)
        self.Doc.recompute()
        self.Hole = self.Doc.addObject("PartDesign::Hole", "Hole")
        self.Hole.Profile = self.HoleSketch
        self.Body.addObject(self.Hole)
        self.Doc.recompute()

    def testPlainHole(self):
        self.Hole.Diameter = 6
        self.Hole.Depth = 10
        # self.Hole.DrillPointAngle = 118.000000
        # self.Hole.TaperedAngle = 90
        self.Hole.ThreadType = 0
        self.Hole.HoleCutType = 0  # 1 = Counterbore, 2 = Countersink
        # self.Hole.HoleCutDiameter = 5
        # self.Hole.HoleCutCountersinkAngle = 90
        # self.Hole.HoleCutDepth = 2 # Counterbore
        self.Hole.DepthType = 0  # 1 = Through all
        self.Hole.DrillPoint = 0  # 1 = Angled
        self.Hole.Tapered = 0  # On/off
        self.Doc.recompute()
        self.assertAlmostEqual(self.Hole.Shape.Volume, 10**3 - pi * 3**2 * 10)

    def testTaperedHole(self):
        self.Hole.Diameter = 6
        self.Hole.Depth = 5
        self.Hole.TaperedAngle = 60
        self.Hole.ThreadType = 0
        self.Hole.HoleCutType = 0
        self.Hole.DepthType = 0
        self.Hole.DrillPoint = 0
        self.Hole.Tapered = 1
        self.Doc.recompute()
        self.assertEqual(len(self.Hole.Shape.Faces), 8)

    def testAngledDrillHole(self):
        self.Hole.Diameter = 6
        self.Hole.Depth = 10
        self.Hole.DrillPointAngle = 118
        self.Hole.ThreadType = 0
        self.Hole.HoleCutType = 0
        self.Hole.DepthType = 0
        self.Hole.DrillPoint = 1
        self.Hole.Tapered = 0
        self.Hole.DrillForDepth = 1
        self.Doc.recompute()
        self.assertEqual(len(self.Hole.Shape.Faces), 8)

    def testCounterboreHole(self):
        self.Hole.Diameter = 6
        self.Hole.Depth = 10
        self.Hole.ThreadType = 0
        self.Hole.HoleCutType = 1
        self.Hole.HoleCutDiameter = 8
        self.Hole.HoleCutDepth = 5
        self.Hole.DepthType = 0
        self.Hole.DrillPoint = 0
        self.Hole.Tapered = 0
        self.Doc.recompute()
        self.assertAlmostEqual(self.Hole.Shape.Volume, 10**3 - pi * 3**2 * 5 - pi * 4**2 * 5)

    def testCountersinkHole(self):
        self.Hole.Diameter = 6
        self.Hole.Depth = 10
        self.Hole.ThreadType = 0
        self.Hole.HoleCutType = 2
        self.Hole.HoleCutDiameter = 9
        self.Hole.HoleCutCountersinkAngle = 90
        self.Hole.DepthType = 0
        self.Hole.DrillPoint = 0
        self.Hole.Tapered = 0
        self.Doc.recompute()
        self.assertAlmostEqual(self.Hole.Shape.Volume, 10**3 - pi * 3**2 * 10 - 24.7400421)

    def testNoRefineHole(self):
        # Add a second box to get a shape with more faces
        self.Box2 = self.Doc.addObject("PartDesign::AdditiveBox", "Box")
        self.Box2.Length = 10
        self.Box2.Width = 10
        self.Box2.Height = 10
        self.Box2.AttacherEngine = "Engine 3D"
        self.Box2.AttachmentOffset = App.Placement(
            App.Vector(1.0000000000, 0.0000000000, 0.0000000000),
            App.Rotation(0.0000000000, 0.0000000000, 0.0000000000),
        )
        self.Box2.MapReversed = False
        self.Box2.AttachmentSupport = self.Doc.getObject("XY_Plane")
        self.Box2.MapPathParameter = 0.000000
        self.Box2.MapMode = "FlatFace"

        # Set the Refine option to False, otherwise adding the second box would be useless
        self.Box2.Refine = False
        self.Body.addObject(self.Box2)
        self.Doc.recompute()

        # Move the Hole on top of the Body
        self.Body.removeObject(self.Hole)
        self.Body.insertObject(self.Hole, self.Box2, True)
        self.Body.Tip = self.Hole
        self.Hole.Diameter = 6
        self.Hole.Depth = 10
        self.Hole.ThreadType = 0
        self.Hole.HoleCutType = 0
        self.Hole.DepthType = 0
        self.Hole.DrillPoint = 0
        self.Hole.Tapered = 0
        self.Hole.Visibility = True

        # Test the number of faces with the Refine option set to False
        self.Hole.Refine = False
        self.Doc.recompute()
        self.assertEqual(len(self.Hole.Shape.Faces), 15)

    def testRefineHole(self):
        # Add a second box to get a shape with more faces
        self.Box2 = self.Doc.addObject("PartDesign::AdditiveBox", "Box")
        self.Box2.Length = 10
        self.Box2.Width = 10
        self.Box2.Height = 10
        self.Box2.AttacherEngine = "Engine 3D"
        self.Box2.AttachmentOffset = App.Placement(
            App.Vector(1.0000000000, 0.0000000000, 0.0000000000),
            App.Rotation(0.0000000000, 0.0000000000, 0.0000000000),
        )
        self.Box2.MapReversed = False
        self.Box2.AttachmentSupport = self.Doc.getObject("XY_Plane")
        self.Box2.MapPathParameter = 0.000000
        self.Box2.MapMode = "FlatFace"

        # Set the Refine option to False, otherwise adding the second box would be useless
        self.Box2.Refine = False
        self.Body.addObject(self.Box2)
        self.Doc.recompute()

        # Move the Hole on top of the Body
        self.Body.removeObject(self.Hole)
        self.Body.insertObject(self.Hole, self.Box2, True)
        self.Body.Tip = self.Hole
        self.Hole.Diameter = 6
        self.Hole.Depth = 10
        self.Hole.ThreadType = 0
        self.Hole.HoleCutType = 0
        self.Hole.DepthType = 0
        self.Hole.DrillPoint = 0
        self.Hole.Tapered = 0
        self.Hole.Visibility = True

        # Test the number of faces with the Refine option set to True
        self.Hole.Refine = True
        self.Doc.recompute()
        self.assertEqual(len(self.Hole.Shape.Faces), 7)

    def testThreadEnums(self):
        """Test thread enums for correct order"""
        # Due to the savefile use of indexes and not strings
        # The correct mapping needs to be ensured to not break savefiles
        # The order of the arrays and elements is critical
        thread_types = {
            "ISOMetricProfile": [
                "M1x0.25",
                "M1.1x0.25",
                "M1.2x0.25",
                "M1.4x0.3",
                "M1.6x0.35",
                "M1.8x0.35",
                "M2x0.4",
                "M2.2x0.45",
                "M2.5x0.45",
                "M3x0.5",
                "M3.5x0.6",
                "M4x0.7",
                "M4.5x0.75",
                "M5x0.8",
                "M6x1.0",
                "M7x1.0",
                "M8x1.25",
                "M9x1.25",
                "M10x1.5",
                "M11x1.5",
                "M12x1.75",
                "M14x2.0",
                "M16x2.0",
                "M18x2.5",
                "M20x2.5",
                "M22x2.5",
                "M24x3.0",
                "M27x3.0",
                "M30x3.5",
                "M33x3.5",
                "M36x4.0",
                "M39x4.0",
                "M42x4.5",
                "M45x4.5",
                "M48x5.0",
                "M52x5.0",
                "M56x5.5",
                "M60x5.5",
                "M64x6.0",
                "M68x6.0",
            ],
            "ISOMetricFineProfile": [
                "M1x0.2",
                "M1.1x0.2",
                "M1.2x0.2",
                "M1.4x0.2",
                "M1.6x0.2",
                "M1.8x0.2",
                "M2x0.25",
                "M2.2x0.25",
                "M2.5x0.35",
                "M3x0.35",
                "M3.5x0.35",
                "M4x0.5",
                "M4.5x0.5",
                "M5x0.5",
                "M5.5x0.5",
                "M6x0.75",
                "M7x0.75",
                "M8x0.75",
                "M8x1.0",
                "M9x0.75",
                "M9x1.0",
                "M10x0.75",
                "M10x1.0",
                "M10x1.25",
                "M11x0.75",
                "M11x1.0",
                "M12x1.0",
                "M12x1.25",
                "M12x1.5",
                "M14x1.0",
                "M14x1.25",
                "M14x1.5",
                "M15x1.0",
                "M15x1.5",
                "M16x1.0",
                "M16x1.5",
                "M17x1.0",
                "M17x1.5",
                "M18x1.0",
                "M18x1.5",
                "M18x2.0",
                "M20x1.0",
                "M20x1.5",
                "M20x2.0",
                "M22x1.0",
                "M22x1.5",
                "M22x2.0",
                "M24x1.0",
                "M24x1.5",
                "M24x2.0",
                "M25x1.0",
                "M25x1.5",
                "M25x2.0",
                "M27x1.0",
                "M27x1.5",
                "M27x2.0",
                "M28x1.0",
                "M28x1.5",
                "M28x2.0",
                "M30x1.0",
                "M30x1.5",
                "M30x2.0",
                "M30x3.0",
                "M32x1.5",
                "M32x2.0",
                "M33x1.5",
                "M33x2.0",
                "M33x3.0",
                "M35x1.5",
                "M35x2.0",
                "M36x1.5",
                "M36x2.0",
                "M36x3.0",
                "M39x1.5",
                "M39x2.0",
                "M39x3.0",
                "M40x1.5",
                "M40x2.0",
                "M40x3.0",
                "M42x1.5",
                "M42x2.0",
                "M42x3.0",
                "M42x4.0",
                "M45x1.5",
                "M45x2.0",
                "M45x3.0",
                "M45x4.0",
                "M48x1.5",
                "M48x2.0",
                "M48x3.0",
                "M48x4.0",
                "M50x1.5",
                "M50x2.0",
                "M50x3.0",
                "M52x1.5",
                "M52x2.0",
                "M52x3.0",
                "M52x4.0",
                "M55x1.5",
                "M55x2.0",
                "M55x3.0",
                "M55x4.0",
                "M56x1.5",
                "M56x2.0",
                "M56x3.0",
                "M56x4.0",
                "M58x1.5",
                "M58x2.0",
                "M58x3.0",
                "M58x4.0",
                "M60x1.5",
                "M60x2.0",
                "M60x3.0",
                "M60x4.0",
                "M62x1.5",
                "M62x2.0",
                "M62x3.0",
                "M62x4.0",
                "M64x1.5",
                "M64x2.0",
                "M64x3.0",
                "M64x4.0",
                "M65x1.5",
                "M65x2.0",
                "M65x3.0",
                "M65x4.0",
                "M68x1.5",
                "M68x2.0",
                "M68x3.0",
                "M68x4.0",
                "M70x1.5",
                "M70x2.0",
                "M70x3.0",
                "M70x4.0",
                "M70x6.0",
                "M72x1.5",
                "M72x2.0",
                "M72x3.0",
                "M72x4.0",
                "M72x6.0",
                "M75x1.5",
                "M75x2.0",
                "M75x3.0",
                "M75x4.0",
                "M75x6.0",
                "M76x1.5",
                "M76x2.0",
                "M76x3.0",
                "M76x4.0",
                "M76x6.0",
                "M80x1.5",
                "M80x2.0",
                "M80x3.0",
                "M80x4.0",
                "M80x6.0",
                "M85x2.0",
                "M85x3.0",
                "M85x4.0",
                "M85x6.0",
                "M90x2.0",
                "M90x3.0",
                "M90x4.0",
                "M90x6.0",
                "M95x2.0",
                "M95x3.0",
                "M95x4.0",
                "M95x6.0",
                "M100x2.0",
                "M100x3.0",
                "M100x4.0",
                "M100x6.0",
            ],
            "UNC": [
                "#1",
                "#2",
                "#3",
                "#4",
                "#5",
                "#6",
                "#8",
                "#10",
                "#12",
                "1/4",
                "5/16",
                "3/8",
                "7/16",
                "1/2",
                "9/16",
                "5/8",
                "3/4",
                "7/8",
                "1",
                "1 1/8",
                "1 1/4",
                "1 3/8",
                "1 1/2",
                "1 3/4",
                "2",
                "2 1/4",
                "2 1/2",
                "2 3/4",
                "3",
                "3 1/4",
                "3 1/2",
                "3 3/4",
                "4",
            ],
            "UNF": [
                "#0",
                "#1",
                "#2",
                "#3",
                "#4",
                "#5",
                "#6",
                "#8",
                "#10",
                "#12",
                "1/4",
                "5/16",
                "3/8",
                "7/16",
                "1/2",
                "9/16",
                "5/8",
                "3/4",
                "7/8",
                "1",
                "1 1/8",
                "1 3/16",
                "1 1/4",
                "1 3/8",
                "1 1/2",
            ],
            "UNEF": [
                "#12",
                "1/4",
                "5/16",
                "3/8",
                "7/16",
                "1/2",
                "9/16",
                "5/8",
                "11/16",
                "3/4",
                "13/16",
                "7/8",
                "15/16",
                "1",
                "1 1/16",
                "1 1/8",
                "1 1/4",
                "1 5/16",
                "1 3/8",
                "1 7/16",
                "1 1/2",
                "1 9/16",
                "1 5/8",
                "1 11/16",
            ],
            "NPT": [
                "1/16",
                "1/8",
                "1/4",
                "3/8",
                "1/2",
                "3/4",
                "1",
                "1 1/4",
                "1 1/2",
                "2",
                "2 1/2",
                "3",
                "3 1/2",
                "4",
                "5",
                "6",
                "8",
                "10",
                "12",
            ],
            "BSP": [
                "1/16",
                "1/8",
                "1/4",
                "3/8",
                "1/2",
                "5/8",
                "3/4",
                "7/8",
                "1",
                "1 1/8",
                "1 1/4",
                "1 1/2",
                "1 3/4",
                "2",
                "2 1/4",
                "2 1/2",
                "2 3/4",
                "3",
                "3 1/2",
                "4",
                "4 1/2",
                "5",
                "5 1/2",
                "6",
            ],
            "BSW": [
                "1/8",
                "3/16",
                "1/4",
                "5/16",
                "3/8",
                "7/16",
                "1/2",
                "9/16",
                "5/8",
                "11/16",
                "3/4",
                "7/8",
                "1",
                "1 1/8",
                "1 1/4",
                "1 1/2",
                "1 3/4",
                "2",
                "2 1/4",
                "2 1/2",
                "2 3/4",
                "3",
                "3 1/4",
                "3 1/2",
                "3 3/4",
                "4",
                "4 1/2",
                "5",
                "5 1/2",
                "6",
            ],
            "BSF": [
                "3/16",
                "7/32",
                "1/4",
                "9/32",
                "5/16",
                "3/8",
                "7/16",
                "1/2",
                "9/16",
                "5/8",
                "11/16",
                "3/4",
                "7/8",
                "1",
                "1 1/8",
                "1 1/4",
                "1 3/8",
                "1 1/2",
                "1 5/8",
                "1 3/4",
                "2",
                "2 1/4",
                "2 1/2",
                "2 3/4",
                "3",
                "3 1/4",
                "3 1/2",
                "3 3/4",
                "4",
                "4 1/4",
            ],
            "ISOTyre": [
                "5v1",
                "5v2",
                "6v1",
                "8v1",
                "9v1",
                "10v2",
                "12v1",
                "13v1",
                "8v2",
                "10v1",
                "11v1",
                "13v2",
                "15v1",
                "16v1",
                "17v1",
                "17v2",
                "17v3",
                "19v1",
                "20v1",
            ],
        }
        allowed_types = self.Hole.getEnumerationsOfProperty("ThreadType")
        for type_index, thread_type in enumerate(thread_types.keys(), 1):
            if thread_type not in allowed_types:
                self._helperNotFoundMessage(thread_type, allowed_types)
            # Set by number like the saved files
            self.Hole.ThreadType = type_index
            self._helperNotCorrectMessage(self.Hole.ThreadType, thread_type)

            allowed_sizes = self.Hole.getEnumerationsOfProperty("ThreadSize")
            for size_index, designation in enumerate(thread_types[thread_type]):
                if designation not in allowed_sizes:
                    self._helperNotFoundMessage(designation, allowed_sizes)
                # Set by number like the saved files
                self.Hole.ThreadSize = size_index
                self._helperNotCorrectMessage(self.Hole.ThreadSize, designation)

    def _helperNotCorrectMessage(self, value, comparison):
        self.assertEqual(
            value,
            comparison,
            f"{comparison} is not in the correct position\n\n"
            "it will break compatibility with older saves",
        )

    def _helperNotFoundMessage(self, prop, allowed_props):
        raise AssertionError(
            "\n"
            f"{prop} is not in {allowed_props}\n\n"
            "Verify that the tested enums names are updated \n\n"
        )

    def tearDown(self):
        # closing doc
        FreeCAD.closeDocument("PartDesignTestHole")
        # print ("omit closing document for debugging")

	# **************************************************************************
	# Copyright (c) 2017 Kurt Kremitzki <kkremitzki@gmail.com> *
	# *
	# This file is part of the FreeCAD CAx development system. *
	# *
	# This program is free software; you can redistribute it and/or modify *
	# it under the terms of the GNU Lesser General Public License (LGPL) *
	# as published by the Free Software Foundation; either version 2 of *
	# the License, or (at your option) any later version. *
	# for detail see the LICENCE text file. *
	# *
	# FreeCAD is distributed in the hope that it will be useful, *
	# but WITHOUT ANY WARRANTY; without even the implied warranty of *
	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
	# GNU Library General Public License for more details. *
	# *
	# You should have received a copy of the GNU Library General Public *
	# License along with FreeCAD; if not, write to the Free Software *
	# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 *
	# USA *
	# **************************************************************************
	from math import pi
	import unittest

	import FreeCAD
	import TestSketcherApp

	App = FreeCAD


	class TestHole(unittest.TestCase):
	def setUp(self):
	self.Doc = FreeCAD.newDocument("PartDesignTestHole")
	self.Body = self.Doc.addObject("PartDesign::Body", "Body")
	self.Box = self.Doc.addObject("PartDesign::AdditiveBox", "Box")
	self.Box.Length = 10
	self.Box.Width = 10
	self.Box.Height = 10
	self.Body.addObject(self.Box)
	self.Doc.recompute()
	self.HoleSketch = self.Doc.addObject("Sketcher::SketchObject", "SketchHole")
	self.HoleSketch.AttachmentSupport = (self.Doc.XY_Plane, [""])
	self.HoleSketch.MapMode = "FlatFace"
	self.HoleSketch.MapReversed = True
	self.Body.addObject(self.HoleSketch)
	TestSketcherApp.CreateCircleSketch(self.HoleSketch, (-5, 5), 1)
	self.Doc.recompute()
	self.Hole = self.Doc.addObject("PartDesign::Hole", "Hole")
	self.Hole.Profile = self.HoleSketch
	self.Body.addObject(self.Hole)
	self.Doc.recompute()

	def testPlainHole(self):
	self.Hole.Diameter = 6
	self.Hole.Depth = 10
	# self.Hole.DrillPointAngle = 118.000000
	# self.Hole.TaperedAngle = 90
	self.Hole.ThreadType = 0
	self.Hole.HoleCutType = 0 # 1 = Counterbore, 2 = Countersink
	# self.Hole.HoleCutDiameter = 5
	# self.Hole.HoleCutCountersinkAngle = 90
	# self.Hole.HoleCutDepth = 2 # Counterbore
	self.Hole.DepthType = 0 # 1 = Through all
	self.Hole.DrillPoint = 0 # 1 = Angled
	self.Hole.Tapered = 0 # On/off
	self.Doc.recompute()
	self.assertAlmostEqual(self.Hole.Shape.Volume, 10*3 - pi 3*2 10)

	def testTaperedHole(self):
	self.Hole.Diameter = 6
	self.Hole.Depth = 5
	self.Hole.TaperedAngle = 60
	self.Hole.ThreadType = 0
	self.Hole.HoleCutType = 0
	self.Hole.DepthType = 0
	self.Hole.DrillPoint = 0
	self.Hole.Tapered = 1
	self.Doc.recompute()
	self.assertEqual(len(self.Hole.Shape.Faces), 8)

	def testAngledDrillHole(self):
	self.Hole.Diameter = 6
	self.Hole.Depth = 10
	self.Hole.DrillPointAngle = 118
	self.Hole.ThreadType = 0
	self.Hole.HoleCutType = 0
	self.Hole.DepthType = 0
	self.Hole.DrillPoint = 1
	self.Hole.Tapered = 0
	self.Hole.DrillForDepth = 1
	self.Doc.recompute()
	self.assertEqual(len(self.Hole.Shape.Faces), 8)

	def testCounterboreHole(self):
	self.Hole.Diameter = 6
	self.Hole.Depth = 10
	self.Hole.ThreadType = 0
	self.Hole.HoleCutType = 1
	self.Hole.HoleCutDiameter = 8
	self.Hole.HoleCutDepth = 5
	self.Hole.DepthType = 0
	self.Hole.DrillPoint = 0
	self.Hole.Tapered = 0
	self.Doc.recompute()
	self.assertAlmostEqual(self.Hole.Shape.Volume, 10*3 - pi 3*2 5 - pi * 4*2 5)

	def testCountersinkHole(self):
	self.Hole.Diameter = 6
	self.Hole.Depth = 10
	self.Hole.ThreadType = 0
	self.Hole.HoleCutType = 2
	self.Hole.HoleCutDiameter = 9
	self.Hole.HoleCutCountersinkAngle = 90
	self.Hole.DepthType = 0
	self.Hole.DrillPoint = 0
	self.Hole.Tapered = 0
	self.Doc.recompute()
	self.assertAlmostEqual(self.Hole.Shape.Volume, 10*3 - pi 3*2 10 - 24.7400421)

	def testNoRefineHole(self):
	# Add a second box to get a shape with more faces
	self.Box2 = self.Doc.addObject("PartDesign::AdditiveBox", "Box")
	self.Box2.Length = 10
	self.Box2.Width = 10
	self.Box2.Height = 10
	self.Box2.AttacherEngine = "Engine 3D"
	self.Box2.AttachmentOffset = App.Placement(
	App.Vector(1.0000000000, 0.0000000000, 0.0000000000),
	App.Rotation(0.0000000000, 0.0000000000, 0.0000000000),
	)
	self.Box2.MapReversed = False
	self.Box2.AttachmentSupport = self.Doc.getObject("XY_Plane")
	self.Box2.MapPathParameter = 0.000000
	self.Box2.MapMode = "FlatFace"

	# Set the Refine option to False, otherwise adding the second box would be useless
	self.Box2.Refine = False
	self.Body.addObject(self.Box2)
	self.Doc.recompute()

	# Move the Hole on top of the Body
	self.Body.removeObject(self.Hole)
	self.Body.insertObject(self.Hole, self.Box2, True)
	self.Body.Tip = self.Hole
	self.Hole.Diameter = 6
	self.Hole.Depth = 10
	self.Hole.ThreadType = 0
	self.Hole.HoleCutType = 0
	self.Hole.DepthType = 0
	self.Hole.DrillPoint = 0
	self.Hole.Tapered = 0
	self.Hole.Visibility = True

	# Test the number of faces with the Refine option set to False
	self.Hole.Refine = False
	self.Doc.recompute()
	self.assertEqual(len(self.Hole.Shape.Faces), 15)

	def testRefineHole(self):
	# Add a second box to get a shape with more faces
	self.Box2 = self.Doc.addObject("PartDesign::AdditiveBox", "Box")
	self.Box2.Length = 10
	self.Box2.Width = 10
	self.Box2.Height = 10
	self.Box2.AttacherEngine = "Engine 3D"
	self.Box2.AttachmentOffset = App.Placement(
	App.Vector(1.0000000000, 0.0000000000, 0.0000000000),
	App.Rotation(0.0000000000, 0.0000000000, 0.0000000000),
	)
	self.Box2.MapReversed = False
	self.Box2.AttachmentSupport = self.Doc.getObject("XY_Plane")
	self.Box2.MapPathParameter = 0.000000
	self.Box2.MapMode = "FlatFace"

	# Set the Refine option to False, otherwise adding the second box would be useless
	self.Box2.Refine = False
	self.Body.addObject(self.Box2)
	self.Doc.recompute()

	# Move the Hole on top of the Body
	self.Body.removeObject(self.Hole)
	self.Body.insertObject(self.Hole, self.Box2, True)
	self.Body.Tip = self.Hole
	self.Hole.Diameter = 6
	self.Hole.Depth = 10
	self.Hole.ThreadType = 0
	self.Hole.HoleCutType = 0
	self.Hole.DepthType = 0
	self.Hole.DrillPoint = 0
	self.Hole.Tapered = 0
	self.Hole.Visibility = True

	# Test the number of faces with the Refine option set to True
	self.Hole.Refine = True
	self.Doc.recompute()
	self.assertEqual(len(self.Hole.Shape.Faces), 7)

	def testThreadEnums(self):
	"""Test thread enums for correct order"""
	# Due to the savefile use of indexes and not strings
	# The correct mapping needs to be ensured to not break savefiles
	# The order of the arrays and elements is critical
	thread_types = {
	"ISOMetricProfile": [
	"M1x0.25",
	"M1.1x0.25",
	"M1.2x0.25",
	"M1.4x0.3",
	"M1.6x0.35",
	"M1.8x0.35",
	"M2x0.4",
	"M2.2x0.45",
	"M2.5x0.45",
	"M3x0.5",
	"M3.5x0.6",
	"M4x0.7",
	"M4.5x0.75",
	"M5x0.8",
	"M6x1.0",
	"M7x1.0",
	"M8x1.25",
	"M9x1.25",
	"M10x1.5",
	"M11x1.5",
	"M12x1.75",
	"M14x2.0",
	"M16x2.0",
	"M18x2.5",
	"M20x2.5",
	"M22x2.5",
	"M24x3.0",
	"M27x3.0",
	"M30x3.5",
	"M33x3.5",
	"M36x4.0",
	"M39x4.0",
	"M42x4.5",
	"M45x4.5",
	"M48x5.0",
	"M52x5.0",
	"M56x5.5",
	"M60x5.5",
	"M64x6.0",
	"M68x6.0",
	],
	"ISOMetricFineProfile": [
	"M1x0.2",
	"M1.1x0.2",
	"M1.2x0.2",
	"M1.4x0.2",
	"M1.6x0.2",
	"M1.8x0.2",
	"M2x0.25",
	"M2.2x0.25",
	"M2.5x0.35",
	"M3x0.35",
	"M3.5x0.35",
	"M4x0.5",
	"M4.5x0.5",
	"M5x0.5",
	"M5.5x0.5",
	"M6x0.75",
	"M7x0.75",
	"M8x0.75",
	"M8x1.0",
	"M9x0.75",
	"M9x1.0",
	"M10x0.75",
	"M10x1.0",
	"M10x1.25",
	"M11x0.75",
	"M11x1.0",
	"M12x1.0",
	"M12x1.25",
	"M12x1.5",
	"M14x1.0",
	"M14x1.25",
	"M14x1.5",
	"M15x1.0",
	"M15x1.5",
	"M16x1.0",
	"M16x1.5",
	"M17x1.0",
	"M17x1.5",
	"M18x1.0",
	"M18x1.5",
	"M18x2.0",
	"M20x1.0",
	"M20x1.5",
	"M20x2.0",
	"M22x1.0",
	"M22x1.5",
	"M22x2.0",
	"M24x1.0",
	"M24x1.5",
	"M24x2.0",
	"M25x1.0",
	"M25x1.5",
	"M25x2.0",
	"M27x1.0",
	"M27x1.5",
	"M27x2.0",
	"M28x1.0",
	"M28x1.5",
	"M28x2.0",
	"M30x1.0",
	"M30x1.5",
	"M30x2.0",
	"M30x3.0",
	"M32x1.5",
	"M32x2.0",
	"M33x1.5",
	"M33x2.0",
	"M33x3.0",
	"M35x1.5",
	"M35x2.0",
	"M36x1.5",
	"M36x2.0",
	"M36x3.0",
	"M39x1.5",
	"M39x2.0",
	"M39x3.0",
	"M40x1.5",
	"M40x2.0",
	"M40x3.0",
	"M42x1.5",
	"M42x2.0",
	"M42x3.0",
	"M42x4.0",
	"M45x1.5",
	"M45x2.0",
	"M45x3.0",
	"M45x4.0",
	"M48x1.5",
	"M48x2.0",
	"M48x3.0",
	"M48x4.0",
	"M50x1.5",
	"M50x2.0",
	"M50x3.0",
	"M52x1.5",
	"M52x2.0",
	"M52x3.0",
	"M52x4.0",
	"M55x1.5",
	"M55x2.0",
	"M55x3.0",
	"M55x4.0",
	"M56x1.5",
	"M56x2.0",
	"M56x3.0",
	"M56x4.0",
	"M58x1.5",
	"M58x2.0",
	"M58x3.0",
	"M58x4.0",
	"M60x1.5",
	"M60x2.0",
	"M60x3.0",
	"M60x4.0",
	"M62x1.5",
	"M62x2.0",
	"M62x3.0",
	"M62x4.0",
	"M64x1.5",
	"M64x2.0",
	"M64x3.0",
	"M64x4.0",
	"M65x1.5",
	"M65x2.0",
	"M65x3.0",
	"M65x4.0",
	"M68x1.5",
	"M68x2.0",
	"M68x3.0",
	"M68x4.0",
	"M70x1.5",
	"M70x2.0",
	"M70x3.0",
	"M70x4.0",
	"M70x6.0",
	"M72x1.5",
	"M72x2.0",
	"M72x3.0",
	"M72x4.0",
	"M72x6.0",
	"M75x1.5",
	"M75x2.0",
	"M75x3.0",
	"M75x4.0",
	"M75x6.0",
	"M76x1.5",
	"M76x2.0",
	"M76x3.0",
	"M76x4.0",
	"M76x6.0",
	"M80x1.5",
	"M80x2.0",
	"M80x3.0",
	"M80x4.0",
	"M80x6.0",
	"M85x2.0",
	"M85x3.0",
	"M85x4.0",
	"M85x6.0",
	"M90x2.0",
	"M90x3.0",
	"M90x4.0",
	"M90x6.0",
	"M95x2.0",
	"M95x3.0",
	"M95x4.0",
	"M95x6.0",
	"M100x2.0",
	"M100x3.0",
	"M100x4.0",
	"M100x6.0",
	],
	"UNC": [
	"#1",
	"#2",
	"#3",
	"#4",
	"#5",
	"#6",
	"#8",
	"#10",
	"#12",
	"1/4",
	"5/16",
	"3/8",
	"7/16",
	"1/2",
	"9/16",
	"5/8",
	"3/4",
	"7/8",
	"1",
	"1 1/8",
	"1 1/4",
	"1 3/8",
	"1 1/2",
	"1 3/4",
	"2",
	"2 1/4",
	"2 1/2",
	"2 3/4",
	"3",
	"3 1/4",
	"3 1/2",
	"3 3/4",
	"4",
	],
	"UNF": [
	"#0",
	"#1",
	"#2",
	"#3",
	"#4",
	"#5",
	"#6",
	"#8",
	"#10",
	"#12",
	"1/4",
	"5/16",
	"3/8",
	"7/16",
	"1/2",
	"9/16",
	"5/8",
	"3/4",
	"7/8",
	"1",
	"1 1/8",
	"1 3/16",
	"1 1/4",
	"1 3/8",
	"1 1/2",
	],
	"UNEF": [
	"#12",
	"1/4",
	"5/16",
	"3/8",
	"7/16",
	"1/2",
	"9/16",
	"5/8",
	"11/16",
	"3/4",
	"13/16",
	"7/8",
	"15/16",
	"1",
	"1 1/16",
	"1 1/8",
	"1 1/4",
	"1 5/16",
	"1 3/8",
	"1 7/16",
	"1 1/2",
	"1 9/16",
	"1 5/8",
	"1 11/16",
	],
	"NPT": [
	"1/16",
	"1/8",
	"1/4",
	"3/8",
	"1/2",
	"3/4",
	"1",
	"1 1/4",
	"1 1/2",
	"2",
	"2 1/2",
	"3",
	"3 1/2",
	"4",
	"5",
	"6",
	"8",
	"10",
	"12",
	],
	"BSP": [
	"1/16",
	"1/8",
	"1/4",
	"3/8",
	"1/2",
	"5/8",
	"3/4",
	"7/8",
	"1",
	"1 1/8",
	"1 1/4",
	"1 1/2",
	"1 3/4",
	"2",
	"2 1/4",
	"2 1/2",
	"2 3/4",
	"3",
	"3 1/2",
	"4",
	"4 1/2",
	"5",
	"5 1/2",
	"6",
	],
	"BSW": [
	"1/8",
	"3/16",
	"1/4",
	"5/16",
	"3/8",
	"7/16",
	"1/2",
	"9/16",
	"5/8",
	"11/16",
	"3/4",
	"7/8",
	"1",
	"1 1/8",
	"1 1/4",
	"1 1/2",
	"1 3/4",
	"2",
	"2 1/4",
	"2 1/2",
	"2 3/4",
	"3",
	"3 1/4",
	"3 1/2",
	"3 3/4",
	"4",
	"4 1/2",
	"5",
	"5 1/2",
	"6",
	],
	"BSF": [
	"3/16",
	"7/32",
	"1/4",
	"9/32",
	"5/16",
	"3/8",
	"7/16",
	"1/2",
	"9/16",
	"5/8",
	"11/16",
	"3/4",
	"7/8",
	"1",
	"1 1/8",
	"1 1/4",
	"1 3/8",
	"1 1/2",
	"1 5/8",
	"1 3/4",
	"2",
	"2 1/4",
	"2 1/2",
	"2 3/4",
	"3",
	"3 1/4",
	"3 1/2",
	"3 3/4",
	"4",
	"4 1/4",
	],
	"ISOTyre": [
	"5v1",
	"5v2",
	"6v1",
	"8v1",
	"9v1",
	"10v2",
	"12v1",
	"13v1",
	"8v2",
	"10v1",
	"11v1",
	"13v2",
	"15v1",
	"16v1",
	"17v1",
	"17v2",
	"17v3",
	"19v1",
	"20v1",
	],
	}
	allowed_types = self.Hole.getEnumerationsOfProperty("ThreadType")
	for type_index, thread_type in enumerate(thread_types.keys(), 1):
	if thread_type not in allowed_types:
	self._helperNotFoundMessage(thread_type, allowed_types)
	# Set by number like the saved files
	self.Hole.ThreadType = type_index
	self._helperNotCorrectMessage(self.Hole.ThreadType, thread_type)

	allowed_sizes = self.Hole.getEnumerationsOfProperty("ThreadSize")
	for size_index, designation in enumerate(thread_types[thread_type]):
	if designation not in allowed_sizes:
	self._helperNotFoundMessage(designation, allowed_sizes)
	# Set by number like the saved files
	self.Hole.ThreadSize = size_index
	self._helperNotCorrectMessage(self.Hole.ThreadSize, designation)

	def _helperNotCorrectMessage(self, value, comparison):
	self.assertEqual(
	value,
	comparison,
	f"{comparison} is not in the correct position\n\n"
	"it will break compatibility with older saves",
	)

	def _helperNotFoundMessage(self, prop, allowed_props):
	raise AssertionError(
	"\n"
	f"{prop} is not in {allowed_props}\n\n"
	"Verify that the tested enums names are updated \n\n"
	)

	def tearDown(self):
	# closing doc
	FreeCAD.closeDocument("PartDesignTestHole")
	# print ("omit closing document for debugging")