Krea-2-SVDQuant-ComfyUI / svdquant_quantize.py

Sync the bundled nodes, workflows and docs with GitHub master (099a051)

06a0bf4 verified 2 months ago

26.2 kB

"""Run the quantizer from inside ComfyUI instead of a terminal.
Same code path as ``quantize_krea2.py`` on the command line -- this imports `convert` rather
than reimplementing it, so there is one quantizer, not two that drift.
The honest caveats, which the node's DESCRIPTION repeats because people do not read module
docstrings:
* It blocks the queue. 54 s for a single-shot split, ~5.7 min with the refinement loop, on a
  3090. Nothing else runs meanwhile.
* It needs the GPU to itself, so it unloads whatever ComfyUI is holding first. Your next
  generation will pay a reload.
* It writes ~8 GB.
"""

from __future__ import annotations

import logging
import os
import shutil

import comfy.model_management
import comfy.utils
import folder_paths

from .quantize_krea2 import (
    SAMPLER_HINTS,
    convert,
    derive_out_path,
    resolve_format,
)
from .svdquant_diag import _CATEGORY

# A source has to be dequantized to bf16 before it can be requantized, so leave a margin over
# the ~8 GB output rather than exactly it.
_MIN_FREE_BYTES = 12 * 1024 ** 3

# All-in-one: the combined file is ~12 GB, and building one from a BF16 DiT writes an ~8 GB
# intermediate first. Those two can land on different drives (the intermediate goes to
# ComfyUI's temp directory), so they are checked separately rather than summed -- the old
# single 15 GB check against the output drive was under the real peak either way.
_MIN_FREE_ALLINONE = 15 * 1024 ** 3
_MIN_FREE_INTERMEDIATE = 11 * 1024 ** 3


def _free_bytes(path: str) -> int:
    return shutil.disk_usage(os.path.dirname(os.path.abspath(path))).free


class Krea2SVDQuantQuantize:
    @classmethod
    def INPUT_TYPES(cls):
        return {
            "required": {
                "source_model": (folder_paths.get_filename_list("diffusion_models"), {
                    "tooltip": "The BF16 Krea 2 checkpoint to quantize (~24 GB). An "
                               "already-quantized file cannot be used as a source, except "
                               "FP8, which is unpacked back to BF16 first.",
                }),
                "format": (["svdq", "w4a4", "int8", "fp8"], {
                    "default": "svdq",
                    "tooltip": "svdq: 4-bit weights and activations plus a low-rank bf16 "
                               "correction branch. w4a4: the same without the branch - "
                               "smaller and ~9%% faster per step. int8: the most faithful "
                               "option and still ~2x fp8 on Ampere. fp8: storage only.",
                }),
                "rank": ("INT", {
                    "default": 64, "min": 8, "max": 1024, "step": 8,
                    "tooltip": "svdq only: size of the low-rank branch. Only pays off with "
                               "refine_iters > 0. Without a LoRA, 64 / 128 / 256 measure the "
                               "same, so 64 is enough. With a LoRA loaded, 256 wins clearly "
                               "and 64 loses most of its advantage - so 256 if you use LoRAs.",
                }),
                "rank_alloc": (["uniform", "gqa"], {
                    "default": "uniform",
                    "tooltip": "svdq only: how the rank budget is spread across the eight "
                               "projection types. Same file size either way. uniform gives "
                               "every layer the same rank. gqa moves the budget to attn.wk / "
                               "attn.wv, which absorb ~2x the quantization error at a third of "
                               "the branch cost because Krea 2 has only 12 kv heads. Measured "
                               "and it does not pay: LPIPS 0.3523 vs 0.3403 for uniform, 5 of "
                               "10 prompts better, no mean effect. It does halve the spread "
                               "across prompts and improve the worst one. Leave on uniform "
                               "unless you are re-testing that.",
                }),
                "refine_iters": ("INT", {
                    "default": 100, "min": 0, "max": 200,
                    "tooltip": "svdq only. 0 is a single-shot SVD split (~54s); 100 refines "
                               "the branch against the quantization error and early-stops "
                               "(~5.7min). Keep this on if rank > 16: refinement is what "
                               "makes rank behave. Without it, raising rank costs file size "
                               "and buys nothing measurable.",
                }),
                "groupsize": ("INT", {
                    "default": 256, "min": 32, "max": 1024, "step": 32,
                    "tooltip": "convrot rotation group size. Unused for fp8.",
                }),
                "variant": (["turbo", "base", "unknown"], {
                    "default": "unknown",
                    "tooltip": "Which Krea 2 release this is. Affects only the output "
                               "filename and the recorded metadata - quantization is "
                               "identical; what differs is the sampler settings afterwards.",
                }),
                "output_name": ("STRING", {
                    "default": "",
                    "tooltip": "Filename inside models/diffusion_models/. Leave empty to "
                               "derive it from the variant and format.",
                }),
                "overwrite": ("BOOLEAN", {
                    "default": False,
                    "tooltip": "Off means an existing file of the same name is an error "
                               "rather than 8 GB written over your last run.",
                }),
            },
            # Optional so workflows saved before this input existed keep validating.
            "optional": {
                "act_stats": ("STRING", {
                    "default": "",
                    "tooltip": "svdq only: an activation-statistics file from the Capture "
                               "nodes (a bare filename is looked up in ComfyUI/output/). "
                               "Fits the low-rank branch against measured per-channel "
                               "activation energy instead of assuming it is uniform. Free at "
                               "inference and the best-measured setting here - LPIPS to BF16 "
                               "0.3378 to 0.2825 with no LoRA. Empty means the plain objective.",
                }),
                # Appended after act_stats rather than inserted among the required inputs:
                # ComfyUI matches widgets_values positionally, so anywhere else would shift
                # every value in a workflow saved before this input existed.
                "seed": ("INT", {
                    "default": 0, "min": -1, "max": 0xFFFFFFFF,
                    "tooltip": "svdq only: seed for the randomized low-rank SVD. Quantizing "
                               "twice with the same seed on the same GPU now gives identical "
                               "files; -1 restores the old unseeded behaviour, where it did "
                               "not. The same seed on a different device still differs (~1e-4 "
                               "per weight) - CPU and CUDA do not draw the same numbers.",
                }),
            },
        }

    @classmethod
    def VALIDATE_INPUTS(cls, source_model, format, variant, rank, rank_alloc, output_name,
                        overwrite):
        """Refuse the obviously-doomed run before the graph starts, not after.
        Everything checked here is a widget, so ComfyUI has it at validation time. That
        matters most in the calibrated graph, where this node sits behind a full sampling
        pass: without this, "that file already exists" arrives several minutes after you
        pressed Queue, having burned the calibration run to tell you.
        Deliberately not checked here: `act_stats`, which can be wired from the Capture Save
        node and therefore has no value yet at validation time. Its checks stay in `run`.
        """
        try:
            src = folder_paths.get_full_path_or_raise("diffusion_models", source_model)
        except Exception as exc:
            return str(exc)
        try:
            _, rank = resolve_format(format, rank, rank_was_set=False)
        except Exception as exc:
            return str(exc)

        if output_name.strip():
            name = output_name.strip()
            if not name.endswith(".safetensors"):
                name += ".safetensors"
            dst = os.path.join(os.path.dirname(src), name)
        else:
            # An act-aware build lands on a different filename, and act_stats is unknowable
            # here. Pass None and the check is against the un-tagged name: it can miss a
            # collision, never invent one, which is the right way for a pre-flight check to
            # be wrong.
            dst, _note = derive_out_path(src, format, rank, variant, rank_alloc, None)

        if os.path.exists(dst) and not overwrite:
            return ("{} already exists. Enable 'overwrite', or set a different output_name."
                    .format(dst))
        free = _free_bytes(dst)
        if free < _MIN_FREE_BYTES:
            return ("only {:.1f} GB free on the drive holding {}; quantizing needs roughly "
                    "{:.0f} GB of headroom.".format(free / 1024 ** 3, os.path.dirname(dst),
                                                    _MIN_FREE_BYTES / 1024 ** 3))
        return True

    @classmethod
    def IS_CHANGED(cls, *args, **kwargs):
        # Writes an ~8 GB file as its side effect, so a cached summary would claim a file
        # exists that the user may have since deleted. Re-queueing is cheap to refuse
        # (overwrite=False still fails fast) and expensive to get wrong.
        return float("nan")

    RETURN_TYPES = ("STRING",)
    RETURN_NAMES = ("summary",)
    OUTPUT_TOOLTIPS = ("Where the checkpoint was written, and what went into it.",)
    OUTPUT_NODE = True
    FUNCTION = "run"
    CATEGORY = _CATEGORY
    TITLE = "Krea2 SVDQuant Quantize"
    DESCRIPTION = ("Builds a quantized Krea 2 checkpoint from a BF16 one, without leaving "
                   "ComfyUI. BLOCKS THE QUEUE while it runs (54s to ~6min), unloads any "
                   "loaded model to free the GPU, and writes ~8 GB. Load the result with the "
                   "Krea2 SVDQuant W4A4 Loader (svdq) or the stock UNETLoader (w4a4/int8/fp8).")

    def run(self, source_model, format, rank, rank_alloc, refine_iters, groupsize, variant,
            output_name, overwrite, act_stats="", seed=0):
        src = folder_paths.get_full_path_or_raise("diffusion_models", source_model)

        # `rank` always carries a value from the widget, so "was it set?" cannot be inferred
        # the way argparse does it. Non-svdq formats simply ignore it here rather than
        # erroring, which is the friendlier reading of a dropdown the user cannot un-set.
        fmt, rank = resolve_format(format, rank, rank_was_set=False)

        # Same validation the CLI does for --act-stats: a typed path that silently did nothing
        # would produce a checkpoint indistinguishable from a plain one.
        stats_path = act_stats.strip() or None
        if stats_path is not None:
            if format != "svdq":
                raise RuntimeError("act_stats only applies to format 'svdq': it weights the "
                                   "low-rank branch, and the other formats have no branch.")
            if not os.path.isabs(stats_path):
                stats_path = os.path.join(folder_paths.get_output_directory(), stats_path)
            if not os.path.isfile(stats_path):
                raise RuntimeError("act_stats file not found: {}".format(stats_path))

        if output_name.strip():
            name = output_name.strip()
            if not name.endswith(".safetensors"):
                name += ".safetensors"
            dst = os.path.join(os.path.dirname(src), name)
        else:
            dst, note = derive_out_path(src, format, rank, variant, rank_alloc, stats_path)
            if note:
                logging.info("[krea2-svdquant] %s", note)

        if os.path.exists(dst) and not overwrite:
            raise RuntimeError(
                "{} already exists. Enable 'overwrite', or set a different output_name."
                .format(dst))

        free = _free_bytes(dst)
        if free < _MIN_FREE_BYTES:
            raise RuntimeError(
                "only {:.1f} GB free on the drive holding {}; quantizing needs roughly {:.0f} "
                "GB of headroom.".format(free / 1024 ** 3, os.path.dirname(dst),
                                         _MIN_FREE_BYTES / 1024 ** 3))

        # Quantization wants the card to itself. Without this it competes with whatever the
        # last generation left resident and OOMs on the dequantize-to-bf16 step.
        comfy.model_management.unload_all_models()
        comfy.model_management.soft_empty_cache()

        pbar = comfy.utils.ProgressBar(1)
        state = {"total": 0}

        def progress(done, total, message):
            if total != state["total"]:
                state["total"] = total
                pbar.total = total
            pbar.update_absolute(done, total)

        logging.info("[krea2-svdquant] quantizing %s -> %s (format %s, rank %s/%s, "
                     "refine_iters %s, act_stats %s, seed %s)", src, dst, fmt, rank,
                     rank_alloc, refine_iters if rank else 0, stats_path or "none",
                     "unseeded" if seed < 0 else seed)
        summary = convert(src, dst, fmt, groupsize, "cuda", rank, refine_iters,
                          variant=variant, progress_cb=progress,
                          rank_alloc=rank_alloc if rank else "uniform",
                          act_stats=stats_path, seed=None if seed < 0 else int(seed))

        hint = SAMPLER_HINTS.get(variant)
        loader = ("Krea2 SVDQuant W4A4 Loader" if rank else "the stock UNETLoader")
        text = "\n".join(x for x in (
            summary, "Load it with {}.".format(loader), hint) if x)
        logging.info("[krea2-svdquant] %s", text)
        return {"ui": {"text": [text]}, "result": (text,)}


class Krea2SVDQuantQuantizeAllInOne:
    @classmethod
    def INPUT_TYPES(cls):
        return {
            "required": {
                "source_dit": (folder_paths.get_filename_list("diffusion_models"), {
                    "tooltip": "The Krea 2 DiT model: either a BF16 source (~24 GB, will be "
                               "quantized first) or an already-quantized SVDQuant/W4A4/INT8 file.",
                }),
                "text_encoder": (folder_paths.get_filename_list("text_encoders"), {
                    "tooltip": "The Qwen3-VL 4B BF16 text encoder safetensors (~8.88 GB). "
                               "Its 252 linear projections will be quantized to te_format, "
                               "reducing it to ~3.2 GB without losing the vision tower.",
                }),
                "vae": (folder_paths.get_filename_list("vae"), {
                    "tooltip": "The Krea 2 VAE (~0.51 GB, kept unquantized).",
                }),
                "format": (["svdq", "w4a4", "int8", "fp8"], {
                    "default": "svdq",
                    "tooltip": "Diffusion model format. svdq: 4-bit weights and activations "
                               "plus a low-rank bf16 correction branch.",
                }),
                "te_format": (["w4a4", "int8"], {
                    "default": "w4a4",
                    "tooltip": "Text encoder format: w4a4 (convrot_w4a4, ~3.2 GB) or int8 "
                               "(int8_tensorwise, ~5.2 GB).",
                }),
                "rank": ("INT", {
                    "default": 64, "min": 8, "max": 1024, "step": 8,
                    "tooltip": "svdq only: size of the low-rank branch on the diffusion model.",
                }),
                "refine_iters": ("INT", {
                    "default": 100, "min": 0, "max": 200,
                    "tooltip": "svdq only (if source_dit is BF16). Refines the branch against "
                               "quantization error. Ignored if source_dit is already quantized.",
                }),
                "groupsize": ("INT", {
                    "default": 256, "min": 32, "max": 1024, "step": 32,
                    "tooltip": "convrot rotation group size.",
                }),
                "variant": (["turbo", "base", "unknown"], {
                    "default": "turbo",
                    "tooltip": "Which Krea 2 release this is.",
                }),
                "output_name": ("STRING", {
                    "default": "",
                    "tooltip": "Filename in models/checkpoints/. Leave empty to derive automatically.",
                }),
                "overwrite": ("BOOLEAN", {
                    "default": False,
                    "tooltip": "Allow overwriting existing output checkpoint.",
                }),
            },
            "optional": {
                "act_stats": ("STRING", {
                    "default": "",
                    "tooltip": "svdq only (if source_dit is BF16): activation statistics file.",
                }),
                "seed": ("INT", {
                    "default": 0, "min": -1, "max": 0xFFFFFFFF,
                    "tooltip": "Random seed for reproducible SVD.",
                }),
            },
        }

    @staticmethod
    def _out_path(output_name, variant, format, rank, te_format) -> str:
        """Where this run will write. Shared, so validation checks the path `run` will use."""
        ckpt_dir = folder_paths.get_folder_paths("checkpoints")[0]
        if output_name.strip():
            name = output_name.strip()
            if not name.endswith(".safetensors"):
                name += ".safetensors"
            return os.path.join(ckpt_dir, name)
        stem = "Krea2-{}".format(variant.capitalize()) if variant != "unknown" else "Krea2"
        tag = "SVDQuant-W4A4-rank{}".format(rank) if rank else format.upper()
        return os.path.join(ckpt_dir, "{}-AllInOne-{}-TE{}.safetensors".format(
            stem, tag, te_format.upper()))

    @classmethod
    def VALIDATE_INPUTS(cls, source_dit, text_encoder, vae, output_name, overwrite,
                        variant, format, te_format, rank):
        """Same pre-flight as the sibling node, for the same reason.
        This one writes ~12 GB and, from a BF16 source, spends ten minutes quantizing a DiT
        before it reaches the combiner -- so "that file already exists" has to arrive at
        Queue time rather than after the expensive part.
        """
        for folder, name in (("diffusion_models", source_dit),
                             ("text_encoders", text_encoder), ("vae", vae)):
            try:
                folder_paths.get_full_path_or_raise(folder, name)
            except Exception as exc:
                return str(exc)
        try:
            _, rank = resolve_format(format, rank, rank_was_set=False)
        except Exception as exc:
            return str(exc)

        dst = cls._out_path(output_name, variant, format, rank, te_format)
        if os.path.exists(dst) and not overwrite:
            return ("{} already exists. Enable 'overwrite', or set a different output_name."
                    .format(dst))
        free = _free_bytes(dst)
        if free < _MIN_FREE_ALLINONE:
            return ("only {:.1f} GB free on the drive holding {}; the combined checkpoint "
                    "needs roughly {:.0f} GB.".format(free / 1024 ** 3, os.path.dirname(dst),
                                                      _MIN_FREE_ALLINONE / 1024 ** 3))
        return True

    @classmethod
    def IS_CHANGED(cls, *args, **kwargs):
        # ~12 GB written as a side effect. Same reasoning as the sibling node: a cached
        # summary claims a file exists that the user may since have deleted.
        return float("nan")

    RETURN_TYPES = ("STRING",)
    RETURN_NAMES = ("summary",)
    OUTPUT_TOOLTIPS = ("Size, tensor counts and loader instructions for the baked checkpoint.",)
    OUTPUT_NODE = True
    FUNCTION = "run"
    CATEGORY = _CATEGORY
    TITLE = "Krea2 SVDQuant Quantize All-in-One"
    DESCRIPTION = ("Bakes DiT, 4-bit quantized Qwen3-VL 4B text encoder, and VAE into a single "
                   "combined checkpoint in ComfyUI/models/checkpoints/ (~12 GB instead of 15.5 GB "
                   "across three files).")

    def run(self, source_dit, text_encoder, vae, format, te_format, rank, refine_iters,
            groupsize, variant, output_name, overwrite, act_stats="", seed=0):
        from safetensors import safe_open
        # `.build_all_in_one`, not `.tools.build_all_in_one`: `.comfyignore` keeps `tools/`
        # out of the published package, so the old import raised ImportError for every
        # Registry/Manager install and worked only for a git clone.
        from .build_all_in_one import build_all_in_one_checkpoint

        dit_src = folder_paths.get_full_path_or_raise("diffusion_models", source_dit)
        te_src = folder_paths.get_full_path_or_raise("text_encoders", text_encoder)
        vae_src = folder_paths.get_full_path_or_raise("vae", vae)

        fmt, rank = resolve_format(format, rank, rank_was_set=False)

        os.makedirs(folder_paths.get_folder_paths("checkpoints")[0], exist_ok=True)
        dst = self._out_path(output_name, variant, format, rank, te_format)

        if os.path.exists(dst) and not overwrite:
            raise RuntimeError(
                "{} already exists. Enable 'overwrite', or set a different output_name."
                .format(dst))

        free = _free_bytes(dst)
        if free < _MIN_FREE_ALLINONE:
            raise RuntimeError(
                "only {:.1f} GB free on the drive holding {}; baking all-in-one needs "
                "roughly {:.0f} GB headroom.".format(
                    free / 1024 ** 3, dst, _MIN_FREE_ALLINONE / 1024 ** 3))

        comfy.model_management.unload_all_models()
        comfy.model_management.soft_empty_cache()

        # Check if DiT is already quantized or needs quantization
        with safe_open(dit_src, framework="pt", device="cpu") as handle:
            keys = list(handle.keys())
        already_quantized = any(k.endswith(".comfy_quant") for k in keys)
        temp_dit = None

        if not already_quantized:
            stats_path = act_stats.strip() or None
            if stats_path is not None and not os.path.isabs(stats_path):
                stats_path = os.path.join(folder_paths.get_output_directory(), stats_path)
            # ComfyUI's temp directory rather than models/checkpoints/: a run killed
            # mid-quantize leaves this ~8 GB file behind -- the `finally` below only covers
            # a clean unwind -- and beside the real checkpoints it shows up in every loader
            # dropdown as something that looks loadable and is not.
            temp_dir = folder_paths.get_temp_directory()
            os.makedirs(temp_dir, exist_ok=True)
            temp_dit = os.path.join(temp_dir,
                                    os.path.basename(dst) + ".tmp_dit.safetensors")
            temp_free = _free_bytes(temp_dit)
            if temp_free < _MIN_FREE_INTERMEDIATE:
                raise RuntimeError(
                    "only {:.1f} GB free on the drive holding {}; quantizing the DiT first "
                    "writes an intermediate of roughly {:.0f} GB there.".format(
                        temp_free / 1024 ** 3, temp_dir,
                        _MIN_FREE_INTERMEDIATE / 1024 ** 3))
            logging.info("[krea2-svdquant] quantizing DiT first: %s -> %s", dit_src, temp_dit)
            convert(dit_src, temp_dit, fmt, groupsize, "cuda", rank, refine_iters,
                    variant=variant, rank_alloc="uniform", act_stats=stats_path,
                    seed=None if seed < 0 else int(seed))
            active_dit = temp_dit
        else:
            active_dit = dit_src

        pbar = comfy.utils.ProgressBar(1)
        state = {"total": 0}

        def progress(done, total, message):
            if total != state["total"]:
                state["total"] = total
                pbar.total = total
            pbar.update_absolute(done, total)

        try:
            summary = build_all_in_one_checkpoint(
                dit_path=active_dit,
                text_encoder_path=te_src,
                vae_path=vae_src,
                out_path=dst,
                fmt_name=format,
                te_format=te_format,
                rank=rank,
                variant=variant,
                groupsize=groupsize,
                device="cuda",
                progress_cb=progress,
            )
        finally:
            if temp_dit and os.path.exists(temp_dit):
                try:
                    os.remove(temp_dit)
                except Exception:
                    # Not worth failing the run over -- the checkpoint is already written --
                    # but ~8 GB staying behind in the temp directory is worth one line,
                    # because nothing else will ever mention it.
                    logging.warning(
                        "[krea2-svdquant] could not delete the intermediate %s; roughly "
                        "8 GB is still there", temp_dit, exc_info=True)

        hint = SAMPLER_HINTS.get(variant)
        loader = ("Krea2 SVDQuant Checkpoint Loader" if rank else "CheckpointLoaderSimple")
        text = "\n".join(x for x in (
            summary, "Load it with {}.".format(loader), hint) if x)
        logging.info("[krea2-svdquant] %s", text)
        return {"ui": {"text": [text]}, "result": (text,)}


NODE_CLASS_MAPPINGS = {
    "Krea2SVDQuantQuantize": Krea2SVDQuantQuantize,
    "Krea2SVDQuantQuantizeAllInOne": Krea2SVDQuantQuantizeAllInOne,
}
NODE_DISPLAY_NAME_MAPPINGS = {
    "Krea2SVDQuantQuantize": "Krea2 SVDQuant Quantize",
    "Krea2SVDQuantQuantizeAllInOne": "Krea2 SVDQuant Quantize All-in-One",
}

	"""Run the quantizer from inside ComfyUI instead of a terminal.

	Same code path as ``quantize_krea2.py`` on the command line -- this imports `convert` rather
	than reimplementing it, so there is one quantizer, not two that drift.

	The honest caveats, which the node's DESCRIPTION repeats because people do not read module
	docstrings:

	* It blocks the queue. 54 s for a single-shot split, ~5.7 min with the refinement loop, on a
	3090. Nothing else runs meanwhile.
	* It needs the GPU to itself, so it unloads whatever ComfyUI is holding first. Your next
	generation will pay a reload.
	* It writes ~8 GB.
	"""

	from __future__ import annotations

	import logging
	import os
	import shutil

	import comfy.model_management
	import comfy.utils
	import folder_paths

	from .quantize_krea2 import (
	SAMPLER_HINTS,
	convert,
	derive_out_path,
	resolve_format,
	)
	from .svdquant_diag import _CATEGORY

	# A source has to be dequantized to bf16 before it can be requantized, so leave a margin over
	# the ~8 GB output rather than exactly it.
	_MIN_FREE_BYTES = 12 * 1024 ** 3

	# All-in-one: the combined file is ~12 GB, and building one from a BF16 DiT writes an ~8 GB
	# intermediate first. Those two can land on different drives (the intermediate goes to
	# ComfyUI's temp directory), so they are checked separately rather than summed -- the old
	# single 15 GB check against the output drive was under the real peak either way.
	_MIN_FREE_ALLINONE = 15 * 1024 ** 3
	_MIN_FREE_INTERMEDIATE = 11 * 1024 ** 3


	def _free_bytes(path: str) -> int:
	return shutil.disk_usage(os.path.dirname(os.path.abspath(path))).free


	class Krea2SVDQuantQuantize:
	@classmethod
	def INPUT_TYPES(cls):
	return {
	"required": {
	"source_model": (folder_paths.get_filename_list("diffusion_models"), {
	"tooltip": "The BF16 Krea 2 checkpoint to quantize (~24 GB). An "
	"already-quantized file cannot be used as a source, except "
	"FP8, which is unpacked back to BF16 first.",
	}),
	"format": (["svdq", "w4a4", "int8", "fp8"], {
	"default": "svdq",
	"tooltip": "svdq: 4-bit weights and activations plus a low-rank bf16 "
	"correction branch. w4a4: the same without the branch - "
	"smaller and ~9%% faster per step. int8: the most faithful "
	"option and still ~2x fp8 on Ampere. fp8: storage only.",
	}),
	"rank": ("INT", {
	"default": 64, "min": 8, "max": 1024, "step": 8,
	"tooltip": "svdq only: size of the low-rank branch. Only pays off with "
	"refine_iters > 0. Without a LoRA, 64 / 128 / 256 measure the "
	"same, so 64 is enough. With a LoRA loaded, 256 wins clearly "
	"and 64 loses most of its advantage - so 256 if you use LoRAs.",
	}),
	"rank_alloc": (["uniform", "gqa"], {
	"default": "uniform",
	"tooltip": "svdq only: how the rank budget is spread across the eight "
	"projection types. Same file size either way. uniform gives "
	"every layer the same rank. gqa moves the budget to attn.wk / "
	"attn.wv, which absorb ~2x the quantization error at a third of "
	"the branch cost because Krea 2 has only 12 kv heads. Measured "
	"and it does not pay: LPIPS 0.3523 vs 0.3403 for uniform, 5 of "
	"10 prompts better, no mean effect. It does halve the spread "
	"across prompts and improve the worst one. Leave on uniform "
	"unless you are re-testing that.",
	}),
	"refine_iters": ("INT", {
	"default": 100, "min": 0, "max": 200,
	"tooltip": "svdq only. 0 is a single-shot SVD split (~54s); 100 refines "
	"the branch against the quantization error and early-stops "
	"(~5.7min). Keep this on if rank > 16: refinement is what "
	"makes rank behave. Without it, raising rank costs file size "
	"and buys nothing measurable.",
	}),
	"groupsize": ("INT", {
	"default": 256, "min": 32, "max": 1024, "step": 32,
	"tooltip": "convrot rotation group size. Unused for fp8.",
	}),
	"variant": (["turbo", "base", "unknown"], {
	"default": "unknown",
	"tooltip": "Which Krea 2 release this is. Affects only the output "
	"filename and the recorded metadata - quantization is "
	"identical; what differs is the sampler settings afterwards.",
	}),
	"output_name": ("STRING", {
	"default": "",
	"tooltip": "Filename inside models/diffusion_models/. Leave empty to "
	"derive it from the variant and format.",
	}),
	"overwrite": ("BOOLEAN", {
	"default": False,
	"tooltip": "Off means an existing file of the same name is an error "
	"rather than 8 GB written over your last run.",
	}),
	},
	# Optional so workflows saved before this input existed keep validating.
	"optional": {
	"act_stats": ("STRING", {
	"default": "",
	"tooltip": "svdq only: an activation-statistics file from the Capture "
	"nodes (a bare filename is looked up in ComfyUI/output/). "
	"Fits the low-rank branch against measured per-channel "
	"activation energy instead of assuming it is uniform. Free at "
	"inference and the best-measured setting here - LPIPS to BF16 "
	"0.3378 to 0.2825 with no LoRA. Empty means the plain objective.",
	}),
	# Appended after act_stats rather than inserted among the required inputs:
	# ComfyUI matches widgets_values positionally, so anywhere else would shift
	# every value in a workflow saved before this input existed.
	"seed": ("INT", {
	"default": 0, "min": -1, "max": 0xFFFFFFFF,
	"tooltip": "svdq only: seed for the randomized low-rank SVD. Quantizing "
	"twice with the same seed on the same GPU now gives identical "
	"files; -1 restores the old unseeded behaviour, where it did "
	"not. The same seed on a different device still differs (~1e-4 "
	"per weight) - CPU and CUDA do not draw the same numbers.",
	}),
	},
	}

	@classmethod
	def VALIDATE_INPUTS(cls, source_model, format, variant, rank, rank_alloc, output_name,
	overwrite):
	"""Refuse the obviously-doomed run before the graph starts, not after.

	Everything checked here is a widget, so ComfyUI has it at validation time. That
	matters most in the calibrated graph, where this node sits behind a full sampling
	pass: without this, "that file already exists" arrives several minutes after you
	pressed Queue, having burned the calibration run to tell you.

	Deliberately not checked here: `act_stats`, which can be wired from the Capture Save
	node and therefore has no value yet at validation time. Its checks stay in `run`.
	"""
	try:
	src = folder_paths.get_full_path_or_raise("diffusion_models", source_model)
	except Exception as exc:
	return str(exc)
	try:
	_, rank = resolve_format(format, rank, rank_was_set=False)
	except Exception as exc:
	return str(exc)

	if output_name.strip():
	name = output_name.strip()
	if not name.endswith(".safetensors"):
	name += ".safetensors"
	dst = os.path.join(os.path.dirname(src), name)
	else:
	# An act-aware build lands on a different filename, and act_stats is unknowable
	# here. Pass None and the check is against the un-tagged name: it can miss a
	# collision, never invent one, which is the right way for a pre-flight check to
	# be wrong.
	dst, _note = derive_out_path(src, format, rank, variant, rank_alloc, None)

	if os.path.exists(dst) and not overwrite:
	return ("{} already exists. Enable 'overwrite', or set a different output_name."
	.format(dst))
	free = _free_bytes(dst)
	if free < _MIN_FREE_BYTES:
	return ("only {:.1f} GB free on the drive holding {}; quantizing needs roughly "
	"{:.0f} GB of headroom.".format(free / 1024 ** 3, os.path.dirname(dst),
	_MIN_FREE_BYTES / 1024 ** 3))
	return True

	@classmethod
	def IS_CHANGED(cls, args, *kwargs):
	# Writes an ~8 GB file as its side effect, so a cached summary would claim a file
	# exists that the user may have since deleted. Re-queueing is cheap to refuse
	# (overwrite=False still fails fast) and expensive to get wrong.
	return float("nan")

	RETURN_TYPES = ("STRING",)
	RETURN_NAMES = ("summary",)
	OUTPUT_TOOLTIPS = ("Where the checkpoint was written, and what went into it.",)
	OUTPUT_NODE = True
	FUNCTION = "run"
	CATEGORY = _CATEGORY
	TITLE = "Krea2 SVDQuant Quantize"
	DESCRIPTION = ("Builds a quantized Krea 2 checkpoint from a BF16 one, without leaving "
	"ComfyUI. BLOCKS THE QUEUE while it runs (54s to ~6min), unloads any "
	"loaded model to free the GPU, and writes ~8 GB. Load the result with the "
	"Krea2 SVDQuant W4A4 Loader (svdq) or the stock UNETLoader (w4a4/int8/fp8).")

	def run(self, source_model, format, rank, rank_alloc, refine_iters, groupsize, variant,
	output_name, overwrite, act_stats="", seed=0):
	src = folder_paths.get_full_path_or_raise("diffusion_models", source_model)

	# `rank` always carries a value from the widget, so "was it set?" cannot be inferred
	# the way argparse does it. Non-svdq formats simply ignore it here rather than
	# erroring, which is the friendlier reading of a dropdown the user cannot un-set.
	fmt, rank = resolve_format(format, rank, rank_was_set=False)

	# Same validation the CLI does for --act-stats: a typed path that silently did nothing
	# would produce a checkpoint indistinguishable from a plain one.
	stats_path = act_stats.strip() or None
	if stats_path is not None:
	if format != "svdq":
	raise RuntimeError("act_stats only applies to format 'svdq': it weights the "
	"low-rank branch, and the other formats have no branch.")
	if not os.path.isabs(stats_path):
	stats_path = os.path.join(folder_paths.get_output_directory(), stats_path)
	if not os.path.isfile(stats_path):
	raise RuntimeError("act_stats file not found: {}".format(stats_path))

	if output_name.strip():
	name = output_name.strip()
	if not name.endswith(".safetensors"):
	name += ".safetensors"
	dst = os.path.join(os.path.dirname(src), name)
	else:
	dst, note = derive_out_path(src, format, rank, variant, rank_alloc, stats_path)
	if note:
	logging.info("[krea2-svdquant] %s", note)

	if os.path.exists(dst) and not overwrite:
	raise RuntimeError(
	"{} already exists. Enable 'overwrite', or set a different output_name."
	.format(dst))

	free = _free_bytes(dst)
	if free < _MIN_FREE_BYTES:
	raise RuntimeError(
	"only {:.1f} GB free on the drive holding {}; quantizing needs roughly {:.0f} "
	"GB of headroom.".format(free / 1024 ** 3, os.path.dirname(dst),
	_MIN_FREE_BYTES / 1024 ** 3))

	# Quantization wants the card to itself. Without this it competes with whatever the
	# last generation left resident and OOMs on the dequantize-to-bf16 step.
	comfy.model_management.unload_all_models()
	comfy.model_management.soft_empty_cache()

	pbar = comfy.utils.ProgressBar(1)
	state = {"total": 0}

	def progress(done, total, message):
	if total != state["total"]:
	state["total"] = total
	pbar.total = total
	pbar.update_absolute(done, total)

	logging.info("[krea2-svdquant] quantizing %s -> %s (format %s, rank %s/%s, "
	"refine_iters %s, act_stats %s, seed %s)", src, dst, fmt, rank,
	rank_alloc, refine_iters if rank else 0, stats_path or "none",
	"unseeded" if seed < 0 else seed)
	summary = convert(src, dst, fmt, groupsize, "cuda", rank, refine_iters,
	variant=variant, progress_cb=progress,
	rank_alloc=rank_alloc if rank else "uniform",
	act_stats=stats_path, seed=None if seed < 0 else int(seed))

	hint = SAMPLER_HINTS.get(variant)
	loader = ("Krea2 SVDQuant W4A4 Loader" if rank else "the stock UNETLoader")
	text = "\n".join(x for x in (
	summary, "Load it with {}.".format(loader), hint) if x)
	logging.info("[krea2-svdquant] %s", text)
	return {"ui": {"text": [text]}, "result": (text,)}


	class Krea2SVDQuantQuantizeAllInOne:
	@classmethod
	def INPUT_TYPES(cls):
	return {
	"required": {
	"source_dit": (folder_paths.get_filename_list("diffusion_models"), {
	"tooltip": "The Krea 2 DiT model: either a BF16 source (~24 GB, will be "
	"quantized first) or an already-quantized SVDQuant/W4A4/INT8 file.",
	}),
	"text_encoder": (folder_paths.get_filename_list("text_encoders"), {
	"tooltip": "The Qwen3-VL 4B BF16 text encoder safetensors (~8.88 GB). "
	"Its 252 linear projections will be quantized to te_format, "
	"reducing it to ~3.2 GB without losing the vision tower.",
	}),
	"vae": (folder_paths.get_filename_list("vae"), {
	"tooltip": "The Krea 2 VAE (~0.51 GB, kept unquantized).",
	}),
	"format": (["svdq", "w4a4", "int8", "fp8"], {
	"default": "svdq",
	"tooltip": "Diffusion model format. svdq: 4-bit weights and activations "
	"plus a low-rank bf16 correction branch.",
	}),
	"te_format": (["w4a4", "int8"], {
	"default": "w4a4",
	"tooltip": "Text encoder format: w4a4 (convrot_w4a4, ~3.2 GB) or int8 "
	"(int8_tensorwise, ~5.2 GB).",
	}),
	"rank": ("INT", {
	"default": 64, "min": 8, "max": 1024, "step": 8,
	"tooltip": "svdq only: size of the low-rank branch on the diffusion model.",
	}),
	"refine_iters": ("INT", {
	"default": 100, "min": 0, "max": 200,
	"tooltip": "svdq only (if source_dit is BF16). Refines the branch against "
	"quantization error. Ignored if source_dit is already quantized.",
	}),
	"groupsize": ("INT", {
	"default": 256, "min": 32, "max": 1024, "step": 32,
	"tooltip": "convrot rotation group size.",
	}),
	"variant": (["turbo", "base", "unknown"], {
	"default": "turbo",
	"tooltip": "Which Krea 2 release this is.",
	}),
	"output_name": ("STRING", {
	"default": "",
	"tooltip": "Filename in models/checkpoints/. Leave empty to derive automatically.",
	}),
	"overwrite": ("BOOLEAN", {
	"default": False,
	"tooltip": "Allow overwriting existing output checkpoint.",
	}),
	},
	"optional": {
	"act_stats": ("STRING", {
	"default": "",
	"tooltip": "svdq only (if source_dit is BF16): activation statistics file.",
	}),
	"seed": ("INT", {
	"default": 0, "min": -1, "max": 0xFFFFFFFF,
	"tooltip": "Random seed for reproducible SVD.",
	}),
	},
	}

	@staticmethod
	def _out_path(output_name, variant, format, rank, te_format) -> str:
	"""Where this run will write. Shared, so validation checks the path `run` will use."""
	ckpt_dir = folder_paths.get_folder_paths("checkpoints")[0]
	if output_name.strip():
	name = output_name.strip()
	if not name.endswith(".safetensors"):
	name += ".safetensors"
	return os.path.join(ckpt_dir, name)
	stem = "Krea2-{}".format(variant.capitalize()) if variant != "unknown" else "Krea2"
	tag = "SVDQuant-W4A4-rank{}".format(rank) if rank else format.upper()
	return os.path.join(ckpt_dir, "{}-AllInOne-{}-TE{}.safetensors".format(
	stem, tag, te_format.upper()))

	@classmethod
	def VALIDATE_INPUTS(cls, source_dit, text_encoder, vae, output_name, overwrite,
	variant, format, te_format, rank):
	"""Same pre-flight as the sibling node, for the same reason.

	This one writes ~12 GB and, from a BF16 source, spends ten minutes quantizing a DiT
	before it reaches the combiner -- so "that file already exists" has to arrive at
	Queue time rather than after the expensive part.
	"""
	for folder, name in (("diffusion_models", source_dit),
	("text_encoders", text_encoder), ("vae", vae)):
	try:
	folder_paths.get_full_path_or_raise(folder, name)
	except Exception as exc:
	return str(exc)
	try:
	_, rank = resolve_format(format, rank, rank_was_set=False)
	except Exception as exc:
	return str(exc)

	dst = cls._out_path(output_name, variant, format, rank, te_format)
	if os.path.exists(dst) and not overwrite:
	return ("{} already exists. Enable 'overwrite', or set a different output_name."
	.format(dst))
	free = _free_bytes(dst)
	if free < _MIN_FREE_ALLINONE:
	return ("only {:.1f} GB free on the drive holding {}; the combined checkpoint "
	"needs roughly {:.0f} GB.".format(free / 1024 ** 3, os.path.dirname(dst),
	_MIN_FREE_ALLINONE / 1024 ** 3))
	return True

	@classmethod
	def IS_CHANGED(cls, args, *kwargs):
	# ~12 GB written as a side effect. Same reasoning as the sibling node: a cached
	# summary claims a file exists that the user may since have deleted.
	return float("nan")

	RETURN_TYPES = ("STRING",)
	RETURN_NAMES = ("summary",)
	OUTPUT_TOOLTIPS = ("Size, tensor counts and loader instructions for the baked checkpoint.",)
	OUTPUT_NODE = True
	FUNCTION = "run"
	CATEGORY = _CATEGORY
	TITLE = "Krea2 SVDQuant Quantize All-in-One"
	DESCRIPTION = ("Bakes DiT, 4-bit quantized Qwen3-VL 4B text encoder, and VAE into a single "
	"combined checkpoint in ComfyUI/models/checkpoints/ (~12 GB instead of 15.5 GB "
	"across three files).")

	def run(self, source_dit, text_encoder, vae, format, te_format, rank, refine_iters,
	groupsize, variant, output_name, overwrite, act_stats="", seed=0):
	from safetensors import safe_open
	# `.build_all_in_one`, not `.tools.build_all_in_one`: `.comfyignore` keeps `tools/`
	# out of the published package, so the old import raised ImportError for every
	# Registry/Manager install and worked only for a git clone.
	from .build_all_in_one import build_all_in_one_checkpoint

	dit_src = folder_paths.get_full_path_or_raise("diffusion_models", source_dit)
	te_src = folder_paths.get_full_path_or_raise("text_encoders", text_encoder)
	vae_src = folder_paths.get_full_path_or_raise("vae", vae)

	fmt, rank = resolve_format(format, rank, rank_was_set=False)

	os.makedirs(folder_paths.get_folder_paths("checkpoints")[0], exist_ok=True)
	dst = self._out_path(output_name, variant, format, rank, te_format)

	if os.path.exists(dst) and not overwrite:
	raise RuntimeError(
	"{} already exists. Enable 'overwrite', or set a different output_name."
	.format(dst))

	free = _free_bytes(dst)
	if free < _MIN_FREE_ALLINONE:
	raise RuntimeError(
	"only {:.1f} GB free on the drive holding {}; baking all-in-one needs "
	"roughly {:.0f} GB headroom.".format(
	free / 1024 3, dst, _MIN_FREE_ALLINONE / 1024 3))

	comfy.model_management.unload_all_models()
	comfy.model_management.soft_empty_cache()

	# Check if DiT is already quantized or needs quantization
	with safe_open(dit_src, framework="pt", device="cpu") as handle:
	keys = list(handle.keys())
	already_quantized = any(k.endswith(".comfy_quant") for k in keys)
	temp_dit = None

	if not already_quantized:
	stats_path = act_stats.strip() or None
	if stats_path is not None and not os.path.isabs(stats_path):
	stats_path = os.path.join(folder_paths.get_output_directory(), stats_path)
	# ComfyUI's temp directory rather than models/checkpoints/: a run killed
	# mid-quantize leaves this ~8 GB file behind -- the `finally` below only covers
	# a clean unwind -- and beside the real checkpoints it shows up in every loader
	# dropdown as something that looks loadable and is not.
	temp_dir = folder_paths.get_temp_directory()
	os.makedirs(temp_dir, exist_ok=True)
	temp_dit = os.path.join(temp_dir,
	os.path.basename(dst) + ".tmp_dit.safetensors")
	temp_free = _free_bytes(temp_dit)
	if temp_free < _MIN_FREE_INTERMEDIATE:
	raise RuntimeError(
	"only {:.1f} GB free on the drive holding {}; quantizing the DiT first "
	"writes an intermediate of roughly {:.0f} GB there.".format(
	temp_free / 1024 ** 3, temp_dir,
	_MIN_FREE_INTERMEDIATE / 1024 ** 3))
	logging.info("[krea2-svdquant] quantizing DiT first: %s -> %s", dit_src, temp_dit)
	convert(dit_src, temp_dit, fmt, groupsize, "cuda", rank, refine_iters,
	variant=variant, rank_alloc="uniform", act_stats=stats_path,
	seed=None if seed < 0 else int(seed))
	active_dit = temp_dit
	else:
	active_dit = dit_src

	pbar = comfy.utils.ProgressBar(1)
	state = {"total": 0}

	def progress(done, total, message):
	if total != state["total"]:
	state["total"] = total
	pbar.total = total
	pbar.update_absolute(done, total)

	try:
	summary = build_all_in_one_checkpoint(
	dit_path=active_dit,
	text_encoder_path=te_src,
	vae_path=vae_src,
	out_path=dst,
	fmt_name=format,
	te_format=te_format,
	rank=rank,
	variant=variant,
	groupsize=groupsize,
	device="cuda",
	progress_cb=progress,
	)
	finally:
	if temp_dit and os.path.exists(temp_dit):
	try:
	os.remove(temp_dit)
	except Exception:
	# Not worth failing the run over -- the checkpoint is already written --
	# but ~8 GB staying behind in the temp directory is worth one line,
	# because nothing else will ever mention it.
	logging.warning(
	"[krea2-svdquant] could not delete the intermediate %s; roughly "
	"8 GB is still there", temp_dit, exc_info=True)

	hint = SAMPLER_HINTS.get(variant)
	loader = ("Krea2 SVDQuant Checkpoint Loader" if rank else "CheckpointLoaderSimple")
	text = "\n".join(x for x in (
	summary, "Load it with {}.".format(loader), hint) if x)
	logging.info("[krea2-svdquant] %s", text)
	return {"ui": {"text": [text]}, "result": (text,)}


	NODE_CLASS_MAPPINGS = {
	"Krea2SVDQuantQuantize": Krea2SVDQuantQuantize,
	"Krea2SVDQuantQuantizeAllInOne": Krea2SVDQuantQuantizeAllInOne,
	}
	NODE_DISPLAY_NAME_MAPPINGS = {
	"Krea2SVDQuantQuantize": "Krea2 SVDQuant Quantize",
	"Krea2SVDQuantQuantizeAllInOne": "Krea2 SVDQuant Quantize All-in-One",
	}