problem stringlengths 26 131k | labels class label 2
classes |
|---|---|
Manipulate OS X windows with script : <p>Ok, so I'm trying to make my setup super simple by creating a script that I can run in the morning that will launch all the applications that I use in the day and lay them out across my 'spaces' how I like them.</p>
<p>This was going ok and I was easily able to have a bash scri... | 0debug |
static int copy_cell(Indeo3DecodeContext *ctx, Plane *plane, Cell *cell)
{
int h, w, mv_x, mv_y, offset, offset_dst;
uint8_t *src, *dst;
offset_dst = (cell->ypos << 2) * plane->pitch + (cell->xpos << 2);
dst = plane->pixels[ctx->buf_sel] + offset_dst;
mv_y = cell->m... | 1threat |
static void breakpoint_invalidate(CPUState *cpu, target_ulong pc)
{
tb_flush(cpu);
}
| 1threat |
static inline CopyRet receive_frame(AVCodecContext *avctx,
void *data, int *got_frame)
{
BC_STATUS ret;
BC_DTS_PROC_OUT output = {
.PicInfo.width = avctx->width,
.PicInfo.height = avctx->height,
};
CHDContext *priv = avctx->priv_data;
HAN... | 1threat |
Apply a function to a single column of a csv in Spark : <p>Using Spark I'm reading a csv and want to apply a function to a column on the csv. I have some code that works but it's very hacky. What is the proper way to do this?</p>
<p>My code</p>
<pre><code>SparkContext().addPyFile("myfile.py")
spark = SparkSession\
... | 0debug |
Python get number from mixed list : <p>I have following list</p>
<pre><code>count =('OK', ['3'])
</code></pre>
<p>i need to extract number, tried <a href="https://stackoverflow.com/questions/26725535/python-extract-integers-from-mixed-list">following</a> but only got </p>
<pre><code>[]
</code></pre>
| 0debug |
static int vc9_decode_frame(AVCodecContext *avctx,
void *data, int *data_size,
uint8_t *buf, int buf_size)
{
VC9Context *v = avctx->priv_data;
int ret = FRAME_SKIPED, len, start_code;
AVFrame *pict = data;
uint8_t *tmp_buf;
v->avctx = a... | 1threat |
android logcat logs chatty module line expire message : <p>I am getting lots of this kind of logcat messages related to my application.</p>
<p><code>11-19 19:04:23.872 3327 3440 I chatty : uid=10085 com.xxxx.yyy expire 18 lines</code></p>
<p>What are these log messages? Am I missing my actual application logcat lo... | 0debug |
cant slide navigation drawer : i am doing a project in android studio and i need a navigation drawer , i made a navigation but the problem i cant slide it left and right its block without moving .
[slide problem][1]
[1]: https://i.stack.imgur.com/eque8.png
<?xml version="1.0" encoding="utf-8"?>
... | 0debug |
Error while Installing apk in Android Studio 2.3 : I can't install my app on my android device.
After updating android studio to 2.3 getting error while installing apk my app is crushed leaving error message as unfortunately stopped
minSdkVersion 14
targetSdkVersion 24
versionCode 1
... | 0debug |
static int dvbsub_parse_clut_segment(AVCodecContext *avctx,
const uint8_t *buf, int buf_size)
{
DVBSubContext *ctx = avctx->priv_data;
const uint8_t *buf_end = buf + buf_size;
int i, clut_id;
int version;
DVBSubCLUT *clut;
int entry_id, depth , full... | 1threat |
React-Native Flatlist getItemLayout with dynamic item height : <p>I am trying to implement a scrollToIndex function on a flatlist so that it scrolls to a specific item when it renders. The issue I am running into is that the items the flatlist renders have a <code>minHeight</code>. The issue with that is, the flatlist ... | 0debug |
Waiting until a variables value isset to display it php : <p>I have a variable $infoCollectedAndSold that is being set inside a form (its values are whatever is being checked in the checkbox).
I want to display this variable, once its values are set. Currently the echo is displaying nothing until i submit the form and ... | 0debug |
def float_sort(price):
float_sort=sorted(price, key=lambda x: float(x[1]), reverse=True)
return float_sort | 0debug |
static void vfio_unmap_bars(VFIOPCIDevice *vdev)
{
int i;
for (i = 0; i < PCI_ROM_SLOT; i++) {
vfio_unmap_bar(vdev, i);
}
if (vdev->has_vga) {
vfio_vga_quirk_teardown(vdev);
pci_unregister_vga(&vdev->pdev);
}
}
| 1threat |
Is not a function error - JavaScript es6 class structure : <p>having issue - is not function error, with my code, here it is:</p>
<pre><code>import $ from 'jquery';
import gsap from 'greensock';
class IntroAnimations{
constructor(){
this.ctaEnter = $('#cta-enter');
this.loadContent = $('.center-... | 0debug |
Split string if contains any of the following comaprison operators like "==", ">", "<", ">=", "<==", "!=" : <p>i want to split a string if it contains one of the following operators ==, >, <, >=, <=, !=</p>
<ol>
<li>if string equals a>b, result is [a,b]</li>
<li>if string equals a < b, result is [a,b]</li>
<l... | 0debug |
static av_cold int xcbgrab_read_header(AVFormatContext *s)
{
XCBGrabContext *c = s->priv_data;
int screen_num, ret;
const xcb_setup_t *setup;
char *host = s->filename[0] ? s->filename : NULL;
const char *opts = strchr(s->filename, '+');
if (opts) {
sscanf(opts, "%d,%d",... | 1threat |
How to Consume API GET method that accepts FromBody parameter : <p>How can I consume Web API 2 GET command in C# that accepts one FromUri parameter and 2nd FromBody parameter. I dont know how to send body in GET command, do i need to use POST command? but how? below is the code I have written so far. Thank you. </p>
<... | 0debug |
int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
int flags, BlockDriver *drv)
{
int ret;
char tmp_filename[PATH_MAX + 1];
BlockDriverState *file = NULL;
if (options == NULL) {
options = qdict_new();
}
bs->options = options;
... | 1threat |
static av_cold int decode_init(AVCodecContext *avctx)
{
WMAProDecodeCtx *s = avctx->priv_data;
uint8_t *edata_ptr = avctx->extradata;
unsigned int channel_mask;
int i, bits;
int log2_max_num_subframes;
int num_possible_block_sizes;
if (avctx->codec_id == AV_CODEC_ID_XMA1 || avctx->... | 1threat |
static int find_image_range(int *pfirst_index, int *plast_index,
const char *path, int start_index)
{
char buf[1024];
int range, last_index, range1, first_index;
for (first_index = start_index; first_index < start_index + 5; first_index++) {
if (av_get_frame... | 1threat |
static int decode_cabac_residual( H264Context *h, DCTELEM *block, int cat, int n, const uint8_t *scantable, const uint32_t *qmul, int max_coeff) {
const int mb_xy = h->s.mb_x + h->s.mb_y*h->s.mb_stride;
static const int significant_coeff_flag_offset[2][6] = {
{ 105+0, 105+15, 105+29, 105+44, 105+47, 4... | 1threat |
static void rtl8139_cplus_transmit(RTL8139State *s)
{
int txcount = 0;
while (rtl8139_cplus_transmit_one(s))
{
++txcount;
}
if (!txcount)
{
DPRINTF("C+ mode : transmitter queue stalled, current TxDesc = %d\n",
s->currCPlusTxDesc);
}
else
... | 1threat |
int attribute_align_arg av_buffersink_get_frame_flags(AVFilterContext *ctx, AVFrame *frame, int flags)
{
BufferSinkContext *buf = ctx->priv;
AVFilterLink *inlink = ctx->inputs[0];
int ret;
AVFrame *cur_frame;
if (!av_fifo_size(buf->fifo)) {
if (flags & AV_BUFFERSINK_FLAG_NO_RE... | 1threat |
document.location = 'http://evil.com?username=' + user_input; | 1threat |
Reversing Strings in lists : <p>I have a list of strings.
e.g. [ixpASara12345, ixpBSara1234,...]
I've been trying to reverse the strings inside the list, but it didn't work so far.</p>
<p>Is there any way I can do this without using any reverse functions?</p>
<p>Thanks!</p>
| 0debug |
JS: How can I parse with regex name value pairs but separated only by semi-colon? : So I got this string (faceted search query):
var q = ":salesRevenue:brand:Tchelicon:brand:Eurocom
:brand:Turbosound:brand:Labgruppen:brand:Tannoy:brand:Klarkteknik
:brand:Midas:brand:Bugera
:brand:Tcelectronic
... | 0debug |
Parse SDK Android - Facebook Graph API v2.0 : <p>I'm using Parse SDK in my app (<a href="https://github.com/ParsePlatform/Parse-SDK-Android">https://github.com/ParsePlatform/Parse-SDK-Android</a>). </p>
<p>My app also uses the Facebook Utils in order to provide a login experience with Facebook (<a href="https://github... | 0debug |
static int cpu_mips_register (CPUMIPSState *env, const mips_def_t *def)
{
env->CP0_PRid = def->CP0_PRid;
env->CP0_Config0 = def->CP0_Config0;
#ifdef TARGET_WORDS_BIGENDIAN
env->CP0_Config0 |= (1 << CP0C0_BE);
#endif
env->CP0_Config1 = def->CP0_Config1;
env->CP0_Config2 = def->CP0_Config2;
... | 1threat |
int ff_vda_create_decoder(struct vda_context *vda_ctx,
uint8_t *extradata,
int extradata_size)
{
OSStatus status = kVDADecoderNoErr;
CFNumberRef height;
CFNumberRef width;
CFNumberRef format;
CFDataRef avc_data;
CFMutableDictionaryRef ... | 1threat |
why ArrayIndexOutOFBoundException in bidirectional bubble sort? : <p>I could not understand why this code is giving ArrayIndexOutOfBoundsException.
here is my code to implement bidirectional bubble sort.</p>
<pre><code>static void bubble(int[] a){
int temp;
for(int i=a.length-1,k=0;i!=k;i--,k++){
for(i... | 0debug |
Change mysql password in Docker container : <p>How could I change root password in docker container since the container stop automatically once I stop the mysql service. </p>
<p>Should I stop the mysql container and deploy a new one?</p>
| 0debug |
static CharDriverState *qmp_chardev_open_udp(ChardevUdp *udp,
Error **errp)
{
int fd;
fd = socket_dgram(udp->remote, udp->local, errp);
if (error_is_set(errp)) {
return NULL;
}
return qemu_chr_open_udp_fd(fd);
}
| 1threat |
static av_cold int ape_decode_init(AVCodecContext *avctx)
{
APEContext *s = avctx->priv_data;
int i;
if (avctx->extradata_size != 6) {
av_log(avctx, AV_LOG_ERROR, "Incorrect extradata\n");
return AVERROR(EINVAL);
}
if (avctx->channels > 2) {
av_log(avctx, AV_LOG_ER... | 1threat |
simple calculator using javascript : I'm trying to create a simple javascript calculator but its not working as expected.
I tried but I'm getting correct results. Below is my code. please let me know what I'm doing wrong here
<HEAD>
<TITLE> Simple Calculation</TITLE>
</HEAD>
<B... | 0debug |
Big differences in GCC code generation when compiling as C++ vs C : <p>I've been playing around a little bit with x86-64 assembly trying to learn more about the various SIMD extensions that are available (MMX, SSE, AVX).</p>
<p>In order to see how different C or C++ constructs are translated into machine code by GCC I... | 0debug |
How to get an already existing file (on my computer) in my method and convert it to InputStream? : <p>I've a generated file in D:/EXPORT_BASE/Export_report. What I need to do is use the filePath string to fetch this file from my local, and then convert this to InputStream.</p>
<p><code>String filePath = D:/EXPORT_BASE... | 0debug |
static int wm8750_tx(I2CSlave *i2c, uint8_t data)
{
WM8750State *s = (WM8750State *) i2c;
uint8_t cmd;
uint16_t value;
if (s->i2c_len >= 2) {
printf("%s: long message (%i bytes)\n", __FUNCTION__, s->i2c_len);
#ifdef VERBOSE
return 1;
#endif
}
s->i2c_data[s->i2c_len +... | 1threat |
why does kable not print when used within a function in rmarkdown : <p>I have to repeat certain outputs in many rmarkdown reports and want to write a function to use for this.</p>
<p>Calling a function outputs plots ok when I knit the rmd file but not kable data frames.</p>
<p>For example</p>
<pre><code>---
title: "... | 0debug |
c# exception “not all code path return a value” : <p>Hi all I have a method to update my MySQL. I'm using a MS Visual Studio </p>
<pre><code>public static User updateUser(string name, string passwd)
{
MySqlConnection connection = new MySqlConnection(conn);
MySqlCommand cmd;
string query = "... | 0debug |
I am trying to develop a chart just like this one : [![chart][1]][1]
[Watch this video from 7:58 to 9:40][2]
All suggestions are appreciated.
[1]: https://i.stack.imgur.com/GAIGt.png
[2]: https://www.youtube.com/watch?v=uT7mLsh18XQ&t=749s | 0debug |
static void pci_basic_config(void)
{
QVirtIO9P *v9p;
void *addr;
size_t tag_len;
char *tag;
int i;
qvirtio_9p_start();
v9p = qvirtio_9p_pci_init();
addr = ((QVirtioPCIDevice *) v9p->dev)->addr + VIRTIO_PCI_CONFIG_OFF(false);
tag_len = qvirtio_config_readw(v9p->dev,
... | 1threat |
static int protocol_client_auth(VncState *vs, uint8_t *data, size_t len)
{
if (data[0] != vs->vd->auth) {
VNC_DEBUG("Reject auth %d\n", (int)data[0]);
vnc_write_u32(vs, 1);
if (vs->minor >= 8) {
static const char err[] = "Authentication failed";
vnc_write_u... | 1threat |
int get_filtered_video_frame(AVFilterContext *ctx, AVFrame *frame,
AVFilterBufferRef **picref_ptr, AVRational *tb)
{
int ret;
AVFilterBufferRef *picref;
if ((ret = avfilter_request_frame(ctx->inputs[0])) < 0)
return ret;
if (!(picref = ctx->inputs[0]->cur_b... | 1threat |
Search for byte pattern in node.js Buffer : <p>I have this node.js Buffer.</p>
<pre><code>var test_buf = "5E4D802158D002001022201022AB778899A1B2C3";
var buffer_hex = new Buffer(test_buf, "hex");
</code></pre>
<p>I want to search for the existence of byte pattern <code>77 88 99</code> in <code>buffer_hex</code>. From ... | 0debug |
i got this interview question and i am not sure what is best answer When in the lifecycle would you bind to events? in reactjs : <p>When in the lifecycle would you bind to events? in reactjs</p>
| 0debug |
ASP.NET Core Environment variable colon in Linux : <p>In ASP.NET Core nested configuration via environment variables is typically done via colon syntax:</p>
<p><code>MySettings:SomeSetting=MyNewValue</code></p>
<p>How do you do this in Linux? The <code>export</code> command rejects the colon?
eg:</p>
<p><code>expor... | 0debug |
static int usb_linux_update_endp_table(USBHostDevice *s)
{
uint8_t *descriptors;
uint8_t devep, type, configuration, alt_interface;
struct usb_ctrltransfer ct;
int interface, ret, length, i;
ct.bRequestType = USB_DIR_IN;
ct.bRequest = USB_REQ_GET_CONFIGURATION;
ct.wValue = 0;
... | 1threat |
static int draw_slice(AVFilterLink *link, int y, int h, int slice_dir)
{
SliceContext *slice = link->dst->priv;
int y2, ret = 0;
if (slice_dir == 1) {
for (y2 = y; y2 + slice->h <= y + h; y2 += slice->h) {
ret = ff_draw_slice(link->dst->outputs[0], y2, slice->h, slice_dir);
... | 1threat |
Dynamic Menu Bar with Chiled Relation In MVC Ajax Call : Hi i am student working on a Project in MVC i am Creating Dynamic Menu bar i retrieve Main Menu successfully Now stuck how to get thier Child Menu here is my code and table
---------------------------
ID ParentID MenuName
--------------... | 0debug |
int sws_getColorspaceDetails(SwsContext *c, int **inv_table, int *srcRange, int **table, int *dstRange, int *brightness, int *contrast, int *saturation)
{
if (isYUV(c->dstFormat) || isGray(c->dstFormat)) return -1;
*inv_table = c->srcColorspaceTable;
*table = c->dstColorspaceTable;
*srcRange ... | 1threat |
create email address validation in this formet in javascript :
**An acceptable email address should meet following criteria to be called a valid email address**
> Contains exactly one '@'
> Minimum 2 characters before '@'
> Any characters including numbers and special characters before '@' are allowed.
> Conta... | 0debug |
qemu_irq *arm_gic_init(uint32_t base, qemu_irq parent_irq)
{
gic_state *s;
qemu_irq *qi;
int iomemtype;
s = (gic_state *)qemu_mallocz(sizeof(gic_state));
if (!s)
return NULL;
qi = qemu_allocate_irqs(gic_set_irq, s, GIC_NIRQ);
s->parent_irq = parent_irq;
if (base != 0x... | 1threat |
Multiplying by width/height in processing : In processing I keep getting 0 when I multiply width or height by a number for example:
int x = width*2;
I get x = 0
Why??? | 0debug |
memset_s(): What does the standard mean with this piece of text? : <p>In C11, K.3.7.4.1 <em>The memset_s function</em>, I found this bit of rather confusing text:</p>
<blockquote>
<p>Unlike <code>memset</code>, any call to the <code>memset_s</code> function shall be evaluated strictly according to the rules of the a... | 0debug |
static uint64_t pl011_read(void *opaque, hwaddr offset,
unsigned size)
{
PL011State *s = (PL011State *)opaque;
uint32_t c;
if (offset >= 0xfe0 && offset < 0x1000) {
return s->id[(offset - 0xfe0) >> 2];
}
switch (offset >> 2) {
case 0:
s->fl... | 1threat |
The active solution configuration is not configured to build or deploy the Service Fabric Application Project : <p>I have a Service Fabric project with multiple services. When i try to deploy it, i get the following error:</p>
<blockquote>
<p>The active solution configuration is not configured to build or deploy
t... | 0debug |
static void apply_tns(float coef[1024], TemporalNoiseShaping *tns,
IndividualChannelStream *ics, int decode)
{
const int mmm = FFMIN(ics->tns_max_bands, ics->max_sfb);
int w, filt, m, i;
int bottom, top, order, start, end, size, inc;
float lpc[TNS_MAX_ORDER];
float tmp[T... | 1threat |
Combining audio and video tracks into new MediaStream : <p>I need to get create a MediaStream using audio and video from different MediaStreams. In Firefox, I can instantiate a new MediaStream from an Array of tracks:</p>
<pre><code> var outputTracks = [];
outputTracks = outputTracks.concat(outputAudioStream.getTr... | 0debug |
Ember include in-app shared components addon in in-app engine : <p>In an Ember application that contains an in-app engine (my-engine) and an in-app addon for shared components (shared-components), how do you include the shared components addon as a dependency of the in-app engine so you may use the components in the te... | 0debug |
Boostrap Form with PHP, MySQL not sending data to database : <p>I've been trying to debug this for ages now and don't understand why is it not sending data to my database. Also as an indication, I'm using Boostrap and this form is inside of a modal. Can someone help me out please. I will include my html snipet as well ... | 0debug |
void *g_malloc(size_t size)
{
char * p;
size += 16;
p = bsd_vmalloc(size);
*(size_t *)p = size;
return p + 16;
}
| 1threat |
How to partition input field to appear as separate input fields on screen? : <p>Look at the image:</p>
<p><a href="https://i.stack.imgur.com/LoVqe.png" rel="noreferrer"><img src="https://i.stack.imgur.com/LoVqe.png" alt="enter image description here"></a></p>
<p>I want design something like in the image, where a 4 di... | 0debug |
How to remove lag when using more than 50,000 options in <select> tag in html?? : <p>I am fetching options for the dropdown menu from database.
I have already used select2.js but it is not working.
Whenever I click on the dropdown menu the page stops responding.</p>
| 0debug |
db.execute('SELECT * FROM products WHERE product_id = ' + product_input) | 1threat |
Given BX. Get it Mirrored and put in CX. How to do this? : <p>Given BX. Get it Mirrored. <em>You can only use SHR, SHL, AND, OR, XOR</em>.</p>
<p>For example:BX = 1234h CX = 4321h</p>
| 0debug |
What is the efficient way to parse JSON array in swift : <p>As of now am parsing the JSON data directly from array,without model class. Please suggest the efficient way to parse JSON either to use model class or directly parse JSON data.</p>
| 0debug |
Excel VBA Macro to Loop and Copy Data to a new sheet : I have an excel workbook with multiple tabs formatted like this:
[1]: https://i.stack.imgur.com/9MAWi.png
I'm learning vba but don't know the excel functions well enough yet to loop through the rows and copy the data reformatted to a new sheet into th... | 0debug |
void ff_vp3_h_loop_filter_mmx(uint8_t *src, int stride, int *bounding_values)
{
x86_reg tmp;
__asm__ volatile(
"movd -2(%1), %%mm6 \n\t"
"movd -2(%1,%3), %%mm0 \n\t"
"movd -2(%1,%3,2), %%mm1 \n\t"
"movd -2(%1,%4), %%mm4 \n\t"
TRANSPOSE8x4(%%mm6, %%mm0... | 1threat |
First and second half year sum display : Using Oracle i want to write a query which display sum of first and second half year data.<br>
If my data search condition like 2016/02 ~ 2017/12.i want to display result like below.<br>
1.Sum of price from 2016/01/01 ~ 2016/06/30 - First half year row<br>
2.Sum of price fr... | 0debug |
Excel data validation restrict other numbering formats except the given one : my numbering format is "00-000" where 00(left) must not be less than 1 or greater than 12 while 000(right) can be infinite.Also "-" must be present in between both numbers. I want to put restriction through data validation is that when anyone... | 0debug |
uint32_t kvmppc_get_vmx(void)
{
return kvmppc_read_int_cpu_dt("ibm,vmx");
}
| 1threat |
Decode JSON into Elm Maybe : <p>Given the following JSON:</p>
<pre><code>[
{
"id": 0,
"name": "Item 1",
"desc": "The first item"
},
{
"id": 1,
"name": "Item 2"
}
]
</code></pre>
<p>How do you decode that into the following Model:</p>
<pre><code>type alias Model =
{ id : Int
, name... | 0debug |
How to target a component in svelte with css? : <p>How would I do something like this:</p>
<pre><code><style>
Nested {
color: blue;
}
</style>
<Nested />
</code></pre>
<p>i.e. How do I apply a style to a component from its parent?</p>
| 0debug |
static VncClientInfo *qmp_query_vnc_client(const VncState *client)
{
struct sockaddr_storage sa;
socklen_t salen = sizeof(sa);
char host[NI_MAXHOST];
char serv[NI_MAXSERV];
VncClientInfo *info;
if (getpeername(client->csock, (struct sockaddr *)&sa, &salen) < 0) {
return NULL;
... | 1threat |
Laravel 5.3 db:seed command simply doesn't work : <p>I do everything by-the-book: </p>
<ol>
<li><p>Installed fresh Laravel 5.3.9 app (all my non-fresh apps produce the same error)</p></li>
<li><p>run <code>php artisan make:auth</code></p></li>
<li><p>create migrations for a new table
`php artisan make:migration creat... | 0debug |
how to setup bootstrap 4 scss with react webpack : <p>i'm starting a new project using reactjs ES6 and webpack</p>
<p>using <a href="https://github.com/kriasoft/react-static-boilerplate" rel="noreferrer">react-static-boilerplate starter</a> question is how can i import bootstrap4 into the build proccess ?</p>
<p>i do... | 0debug |
Print type of variable in python3.5 on django 1.8 : <p>I am having a hard time of determining the type of my variable since I am used on python2 and have just migrated to python3</p>
<pre><code>from django.http import HttpResponse
def myview(request):
x = "Name"
print (x)
print type(x)
return HttpResp... | 0debug |
static int get_phys_addr_v6(CPUState *env, uint32_t address, int access_type,
int is_user, uint32_t *phys_ptr, int *prot)
{
int code;
uint32_t table;
uint32_t desc;
uint32_t xn;
int type;
int ap;
int domain;
uint32_t phys_addr;
table = get_level1_table... | 1threat |
window.location.href = 'http://attack.com?user=' + user_input; | 1threat |
Problems pushing in javascript (Cannot read property 'push' of null) : <p>I'm new on javascript and I am having a lot of trouble finding the error to this program:</p>
<pre><code>const listaTweets = document.getElementById("lista-tweets");
//Función para agregar tweets
document.getElementById("formulario").addEventLi... | 0debug |
Searching lists then calling same place from other lists : <p>I wish for my program to search resident and if it a specific value it will print the same placed data from other lists. For example in this situation I would want it to print; </p>
<p>"Name is Alan, age is 7 and they do not live in place",</p>
<p>as well ... | 0debug |
void pl050_init(uint32_t base, qemu_irq irq, int is_mouse)
{
int iomemtype;
pl050_state *s;
s = (pl050_state *)qemu_mallocz(sizeof(pl050_state));
iomemtype = cpu_register_io_memory(0, pl050_readfn,
pl050_writefn, s);
cpu_register_physical_memory(base, ... | 1threat |
how to solve this expression taking in mind precedence and associativity in c? : Int m=4 ,s=5;
m = (p=s) * (p==s);
Printf("%d",m);
How to solve this expression in c?
What will be the value of m?
How parenthesis () changes the precedence of operators in this example?
| 0debug |
static av_always_inline void MPV_motion_internal(MpegEncContext *s,
uint8_t *dest_y,
uint8_t *dest_cb,
uint8_t *dest_cr,
... | 1threat |
How to change with js / jquery attribute onkeyup with another function : <p>How can I change value of HTML onkeyup attribute with js/jquery?</p>
| 0debug |
static int nbd_can_accept(void *opaque)
{
return nb_fds < shared;
}
| 1threat |
static int64_t expr_unary(Monitor *mon)
{
int64_t n;
char *p;
int ret;
switch(*pch) {
case '+':
next();
n = expr_unary(mon);
break;
case '-':
next();
n = -expr_unary(mon);
break;
case '~':
next();
n = ~expr_una... | 1threat |
How do I load a node module as if the current module were located somewhere else? : <p>I have some nodejs code running in a module somewhere. From this module, I would like to load a module located in a completely different place in the file system -- for example, given the path <code>"/another/dir"</code> and the modu... | 0debug |
void stb_phys(target_phys_addr_t addr, uint32_t val)
{
uint8_t v = val;
cpu_physical_memory_write(addr, &v, 1);
}
| 1threat |
deear friends am working on a POS project and am stack at an error about Is operator : Severity Code Description Project File Line Suppression State
Error BC30020 'Is' operator does not accept operands of type 'Integer'. Operands must be reference or nullable types. POS C:\Users\pc\Desktop\POS\POS\GUI\MainWindow.vb 13... | 0debug |
void kvm_s390_interrupt(S390CPU *cpu, int type, uint32_t code)
{
kvm_s390_interrupt_internal(cpu, type, code, 0, 0);
}
| 1threat |
How to get Custom date format from timestamp php : <p>I have a time stamp like this code below.</p>
<pre><code>$time=time();
</code></pre>
<p>Please Explain how can i make a custom date from this.</p>
| 0debug |
static int check_write_unsafe(BlockDriverState *bs, int64_t sector_num,
const uint8_t *buf, int nb_sectors)
{
if (!bs->probed) {
return 0;
}
if (sector_num == 0 && nb_sectors > 0) {
return check_for_block_signature(bs, buf);
}
return... | 1threat |
static void breakpoint_invalidate(CPUArchState *env, target_ulong pc)
{
tb_invalidate_phys_addr(cpu_get_phys_page_debug(env, pc));
}
| 1threat |
static int sdp_parse(AVFormatContext *s, const char *content)
{
const char *p;
int letter;
char buf[16384], *q;
SDPParseState sdp_parse_state, *s1 = &sdp_parse_state;
memset(s1, 0, sizeof(SDPParseState));
p = content;
for(;;) {
skip_spaces(&p);
l... | 1threat |
What is the difference between != and <> operators in php? : <p>I am new to the php and what is the main difference between those operators </p>
| 0debug |
static int parse_ptl(HEVCContext *s, PTL *ptl, int max_num_sub_layers)
{
int i;
HEVCLocalContext *lc = s->HEVClc;
GetBitContext *gb = &lc->gb;
decode_profile_tier_level(s, &ptl->general_PTL);
ptl->general_PTL.level_idc = get_bits(gb, 8);
for (i = 0; i < max_num_sub_layers - 1; i++) {
... | 1threat |
the \b flag not working in javascript regrex : I am new to regular expressions and basically just playing around with them in my brower console , using MDN as a referance , i tried the below regrex:
/\bg/g.test('me building and him')
even if i try `/\bg/g` , i still get false, WHY ?
The MDN definition sa... | 0debug |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.