| /*============================================================================== | |
| * WIFI CONFIGURATION | |
| * | |
| * You must configure your particular hardware. Follow the steps below. | |
| * | |
| * By default, StandardFirmataWiFi is configured as a TCP server, to configure | |
| * as a TCP client, see STEP 2. | |
| *============================================================================*/ | |
| // STEP 1 [REQUIRED] | |
| // Uncomment / comment the appropriate set of includes for your hardware (OPTION A, B or C) | |
| // Arduino MKR1000 or ESP8266 are enabled by default if compiling for either of those boards. | |
| /* | |
| * OPTION A: Configure for Arduino MKR1000 or Arduino WiFi Shield 101 | |
| * | |
| * This will configure StandardFirmataWiFi to use the WiFi101 library, which works with the | |
| * Arduino WiFi101 shield and devices that have the WiFi101 chip built in (such as the MKR1000). | |
| * It is compatible with 802.11 B/G/N networks. | |
| * | |
| * If you are using the MKR1000 board, continue on to STEP 2. If you are using the WiFi 101 shield, | |
| * follow the instructions below. | |
| * | |
| * To enable for the WiFi 101 shield, uncomment the #define WIFI_101 below and verify the | |
| * #define ARDUINO_WIFI_SHIELD is commented out for OPTION B. | |
| * | |
| * IMPORTANT: You must have the WiFI 101 library installed. To easily install this library, open | |
| * the library manager via: Arduino IDE Menus: Sketch > Include Library > Manage Libraries > filter | |
| * search for "WiFi101" > Select the result and click 'install' | |
| */ | |
| //#define WIFI_101 | |
| //do not modify the following 11 lines | |
| // automatically include if compiling for MRK1000 | |
| /* | |
| * OPTION B: Configure for legacy Arduino WiFi shield | |
| * | |
| * This will configure StandardFirmataWiFi to use the original WiFi library (deprecated) provided | |
| * with the Arduino IDE. It is supported by the Arduino WiFi shield (a discontinued product) and | |
| * is compatible with 802.11 B/G networks. | |
| * | |
| * To configure StandardFirmataWiFi to use the legacy Arduino WiFi shield | |
| * leave the #define below uncommented and ensure #define WIFI_101 is commented out for OPTION A. | |
| */ | |
| //#define ARDUINO_WIFI_SHIELD | |
| //do not modify the following 10 lines | |
| /* | |
| * OPTION C: Configure for ESP8266 | |
| * | |
| * This will configure StandardFirmataWiFi to use the ESP8266WiFi library for boards | |
| * with an ESP8266 chip. It is compatible with 802.11 B/G/N networks. | |
| * | |
| * The appropriate libraries are included automatically when compiling for the ESP8266 so | |
| * continue on to STEP 2. | |
| * | |
| * IMPORTANT: You must have the esp8266 board support installed. To easily install this board see | |
| * the instructions here: https://github.com/esp8266/Arduino#installing-with-boards-manager. | |
| */ | |
| //do not modify the following 14 lines | |
| // automatically include if compiling for ESP8266 | |
| /* | |
| * OPTION D: Configure for HUZZAH | |
| * | |
| * HUZZAH with CC3000 is not yet supported, this will be added in a later revision to | |
| * StandardFirmataWiFi. | |
| * For HUZZAH with ESP8266 use ESP8266_WIFI. | |
| */ | |
| //------------------------------ | |
| // TODO | |
| //------------------------------ | |
| //#define HUZZAH_WIFI | |
| // STEP 2 [OPTIONAL for all boards and shields] | |
| // If you want to setup you board as a TCP client, uncomment the following define and replace | |
| // the IP address with the IP address of your server. | |
| //#define SERVER_IP 10, 0, 0, 15 | |
| // STEP 3 [REQUIRED for all boards and shields] | |
| // replace this with your wireless network SSID | |
| char ssid[] = "your_network_name"; | |
| // STEP 4 [OPTIONAL for all boards and shields] | |
| // If you want to use a static IP (v4) address, uncomment the line below. You can also change the IP. | |
| // If the first line is commented out, the WiFi shield will attempt to get an IP from the DHCP server. | |
| // If you are using a static IP with the ESP8266 then you must also uncomment the SUBNET and GATEWAY. | |
| //#define STATIC_IP_ADDRESS 192,168,1,113 | |
| //#define SUBNET_MASK 255,255,255,0 // REQUIRED for ESP8266_WIFI, optional for others | |
| //#define GATEWAY_IP_ADDRESS 0,0,0,0 // REQUIRED for ESP8266_WIFI, optional for others | |
| // STEP 5 [REQUIRED for all boards and shields] | |
| // define your port number here, you will need this to open a TCP connection to your Arduino | |
| // STEP 6 [REQUIRED for all boards and shields] | |
| // determine your network security type (OPTION A, B, or C). Option A is the most common, and the | |
| // default. | |
| /* | |
| * OPTION A: WPA / WPA2 | |
| * | |
| * WPA is the most common network security type. A passphrase is required to connect to this type. | |
| * | |
| * To enable, leave #define WIFI_WPA_SECURITY uncommented below, set your wpa_passphrase value | |
| * appropriately, and do not uncomment the #define values under options B and C | |
| */ | |
| char wpa_passphrase[] = "your_wpa_passphrase"; | |
| /* | |
| * OPTION B: WEP | |
| * | |
| * WEP is a less common (and regarded as less safe) security type. A WEP key and its associated | |
| * index are required to connect to this type. | |
| * | |
| * To enable, Uncomment the #define below, set your wep_index and wep_key values appropriately, | |
| * and verify the #define values under options A and C are commented out. | |
| */ | |
| //#define WIFI_WEP_SECURITY | |
| //The wep_index below is a zero-indexed value. | |
| //Valid indices are [0-3], even if your router/gateway numbers your keys [1-4]. | |
| byte wep_index = 0; | |
| char wep_key[] = "your_wep_key"; | |
| /* | |
| * OPTION C: Open network (no security) | |
| * | |
| * Open networks have no security, can be connected to by any device that knows the ssid, and are | |
| * unsafe. | |
| * | |
| * To enable, uncomment #define WIFI_NO_SECURITY below and verify the #define values | |
| * under options A and B are commented out. | |
| */ | |
| //#define WIFI_NO_SECURITY | |
| /*============================================================================== | |
| * CONFIGURATION ERROR CHECK (don't change anything here) | |
| *============================================================================*/ | |
| /*============================================================================== | |
| * WIFI STREAM (don't change anything here) | |
| *============================================================================*/ | |
| WiFiClientStream stream(IPAddress(SERVER_IP), SERVER_PORT); | |
| WiFiServerStream stream(SERVER_PORT); | |
| /*============================================================================== | |
| * PIN IGNORE MACROS (don't change anything here) | |
| *============================================================================*/ | |
| // ignore SPI pins, pin 5 (reset WiFi101 shield), pin 7 (WiFi handshake) and pin 10 (WiFi SS) | |
| // also don't ignore SS pin if it's not pin 10. Not needed for Arduino MKR1000. | |
| // ignore SPI pins, pin 4 (SS for SD-Card on WiFi-shield), pin 7 (WiFi handshake) and pin 10 (WiFi SS) | |
| // On Leonardo, pin 24 maps to D4 and pin 28 maps to D10 | |
| // ignore SPI pins, pin 4 (SS for SD-Card on WiFi-shield), pin 7 (WiFi handshake) and pin 10 (WiFi SS) | |