| /* | |
| Basic Web Server | |
| A simple web server that replies with nothing, but prints the client's request | |
| and the server IP address. | |
| Circuit: | |
| * GSM shield attached | |
| created | |
| by David Cuartielles | |
| modified 21 Nov 2012 | |
| by Tom Igoe | |
| http://www.arduino.cc/en/Tutorial/GSMToolsTestWebServer | |
| This example code is part of the public domain | |
| */ | |
| // PIN Number | |
| // APN data | |
| // initialize the library instance | |
| GPRS gprs; | |
| GSM gsmAccess; // include a 'true' parameter for debug enabled | |
| GSMServer server(80); // port 80 (http default) | |
| // timeout | |
| const unsigned long __TIMEOUT__ = 10 * 1000; | |
| void setup() { | |
| // initialize serial communications and wait for port to open: | |
| Serial.begin(9600); | |
| while (!Serial) { | |
| ; // wait for serial port to connect. Needed for Leonardo only | |
| } | |
| Serial.println("starting,.."); | |
| // connection state | |
| boolean connected = true; | |
| // Start GSM shield | |
| // If your SIM has PIN, pass it as a parameter of begin() in quotes | |
| while (!connected) { | |
| if ((gsmAccess.begin(PINNUMBER) == GSM_READY) & | |
| (gprs.attachGPRS(GPRS_APN, GPRS_LOGIN, GPRS_PASSWORD) == GPRS_READY)) { | |
| connected = true; | |
| } else { | |
| Serial.println("Not connected"); | |
| delay(1000); | |
| } | |
| } | |
| Serial.println("Connected to GPRS network"); | |
| // start server | |
| server.begin(); | |
| //Get IP. | |
| IPAddress LocalIP = gprs.getIPAddress(); | |
| Serial.println("Server IP address="); | |
| Serial.println(LocalIP); | |
| } | |
| void loop() { | |
| GSMClient client = server.available(); | |
| if (client) { | |
| if (client.available()) { | |
| Serial.write(client.read()); | |
| } | |
| } | |
| } | |