Datasets:

Beifengdo
/

Arduino-Development

/******************************************************************
 This is the core graphics library for all our displays, providing
 basic graphics primitives (points, lines, circles, etc.). It needs
 to be paired with a hardware-specific library for each display
 device we carry (handling the lower-level functions).
 
 Adafruit invests time and resources providing this open
 source code, please support Adafruit and open-source hardware
 by purchasing products from Adafruit!
 
 Written by Limor Fried/Ladyada for Adafruit Industries.
 Processing-like API written by Enrico Gueli for Officine Arduino.
 BSD license, check license.txt for more information.
 All text above must be included in any redistribution.
 ******************************************************************/

#ifndef _ADAFRUIT_GFX_H
#define _ADAFRUIT_GFX_H

#if ARDUINO >= 100
 #include "Arduino.h"
 #include "Print.h"
#else
 #include "WProgram.h"
#endif

/*
 * This library can work with or without the presence of an SD
 * reading library (to load images). At the moment, only the
 * Arduino SD library is supported; it is included in
 * standard Arduino libraries.
 * 
 * The presence of the SD library is detected by looking at the
 * __SD_H__ preprocessor variable, defined into 
 * Arduino SD library to avoid double inclusion. This means
 * that in order to use the image-related API of Adafruit_GFX,
 * SD.h *must* be included before Adafruit_GFX.
 * 
 * The bottom part of this include file contains the actual image
 * loading code; if it was in a separate .cpp file, there were no
 * way to check if the SD library was present or not.
 * 
 * A partial solution was to include SD.h anyway, see if that works
 * (i.e. it is found in the include search path) and act accordingly.
 * But this solution relied on the preprocessor to issue only a
 * warning when an include file is not found. Avr-gcc, used for
 * Arduino 8-bit MCUs, does that, but the standard gcc-4.4, used for
 * Arduino Due, issues a fatal error and stops compilation.
 * 
 * The best solution so far is to put the code here. It works if this
 * include is used only in one .cpp file in the build (this is the
 * case of most Arduino sketches); if used in multiple .cpp files,
 * the linker may complain about duplicate definitions.
 * 
 */

#if defined(__SD_H__)  // Arduino SD library
 #include "PImage.h"
#else
 #warning "The SD library was not found. loadImage() and image() won't be supported."
#endif

#define swap(a, b) { int16_t t = a; a = b; b = t; }

/* TODO
enum RectMode {
  CORNER,
  CORNERS,
  RADIUS,
  CENTER
};
*/

typedef uint16_t color;

class Adafruit_GFX : public Print {
 public:

  Adafruit_GFX(int16_t w, int16_t h); // Constructor

  // This MUST be defined by the subclass
  virtual void drawPixel(int16_t x, int16_t y, uint16_t color) = 0;

  

  // These MAY be overridden by the subclass to provide device-specific
  // optimized code.  Otherwise 'generic' versions are used.
  virtual void 
	drawLine(int16_t x0, int16_t y0, int16_t x1, int16_t y1, 
		uint16_t color),
  	drawFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color),
	drawFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color),
	drawRect(int16_t x, int16_t y, int16_t w, int16_t h, 
		uint16_t color),
	fillRect(int16_t x, int16_t y, int16_t w, int16_t h, 
		uint16_t color),
	fillScreen(uint16_t color),
	invertDisplay(boolean i);

// These exist only with Adafruit_GFX (no subclass overrides)
  void
	drawCircle(int16_t x0, int16_t y0, int16_t r, uint16_t color),
	drawCircleHelper(int16_t x0, int16_t y0,
			int16_t r, uint8_t cornername, uint16_t color),
	fillCircle(int16_t x0, int16_t y0, int16_t r, uint16_t color),
	fillCircleHelper(int16_t x0, int16_t y0, int16_t r,
		      uint8_t cornername, int16_t delta, uint16_t color),

	drawTriangle(int16_t x0, int16_t y0, int16_t x1, int16_t y1,
		    int16_t x2, int16_t y2, uint16_t color),
	fillTriangle(int16_t x0, int16_t y0, int16_t x1, int16_t y1,
		    int16_t x2, int16_t y2, uint16_t color),
	drawRoundRect(int16_t x0, int16_t y0, int16_t w, int16_t h,
		     int16_t radius, uint16_t color),
	fillRoundRect(int16_t x0, int16_t y0, int16_t w, int16_t h,
		     int16_t radius, uint16_t color),

	drawBitmap(int16_t x, int16_t y, 
		  const uint8_t *bitmap, int16_t w, int16_t h,
		  uint16_t color),
	drawChar(int16_t x, int16_t y, unsigned char c,
		uint16_t color, uint16_t bg, uint8_t size),
	setCursor(int16_t x, int16_t y),
	setTextColor(uint16_t c),
	setTextColor(uint16_t c, uint16_t bg),
	setTextSize(uint8_t s),
	setTextWrap(boolean w),
	setRotation(uint8_t r);

#if ARDUINO >= 100
  virtual size_t write(uint8_t);
#else
  virtual void   write(uint8_t);
#endif

  int16_t 
	height(void),
	width(void);


  uint8_t getRotation(void);

  
  /*
   * Processing-like graphics primitives
   */
  
  /// transforms a color in 16-bit form given the RGB components.
  /// The default implementation makes a 5-bit red, a 6-bit
  /// green and a 5-bit blue (MSB to LSB). Devices that use
  /// different scheme should override this. 
  virtual uint16_t newColor(uint8_t red, uint8_t green, uint8_t blue);
  
  
  void
	// http://processing.org/reference/background_.html
	background(uint8_t red, uint8_t green, uint8_t blue),
	background(color c),

	// http://processing.org/reference/fill_.html
	fill(uint8_t red, uint8_t green, uint8_t blue),
	fill(color c),

	// http://processing.org/reference/noFill_.html
	noFill(),

	// http://processing.org/reference/stroke_.html
	stroke(uint8_t red, uint8_t green, uint8_t blue),
	stroke(color c),

	// http://processing.org/reference/noStroke_.html
	noStroke(),
  
	text(const char * text, int16_t x, int16_t y),
	textWrap(const char * text, int16_t x, int16_t y),

	textSize(uint8_t size),
  
	// similar to ellipse() in Processing, but with
	// a single radius.
	// http://processing.org/reference/ellipse_.html
	circle(int16_t x, int16_t y, int16_t r),
	point(int16_t x, int16_t y),
	line(int16_t x1, int16_t y1, int16_t x2, int16_t y2),
	quad(int16_t x1, int16_t y1, int16_t x2, int16_t y2, int16_t x3, int16_t y3, int16_t x4, int16_t y4),
rect(int16_t x, int16_t y, int16_t width, int16_t height),
	rect(int16_t x, int16_t y, int16_t width, int16_t height, int16_t radius),
	triangle(int16_t x1, int16_t y1, int16_t x2, int16_t y2, int16_t x3, int16_t y3);
  
  /* TODO
  void rectMode(RectMode mode);
  
  void pushStyle();
  void popStyle();
  */

#if defined(__SD_H__)  // Arduino SD library
  PImage loadImage(const char * fileName) { return PImage::loadImage(fileName); }
  
  void image(PImage & img, uint16_t x, uint16_t y);
#endif
  
 protected:
  int16_t
	WIDTH, HEIGHT;   // this is the 'raw' display w/h - never changes
  int16_t
	_width, _height, // dependent on rotation
	cursor_x, cursor_y;
  uint16_t
	textcolor, textbgcolor;
  uint8_t
	textsize,
	rotation;
  boolean
	wrap; // If set, 'wrap' text at right edge of display
  
  /*
   * Processing-style graphics state
   */
  
  color strokeColor;
  bool useStroke;
  color fillColor;
  bool useFill;
};

#if defined(__SD_H__)  // Arduino SD library

#define BUFFPIXEL 20

void Adafruit_GFX::image(PImage & img, uint16_t x, uint16_t y) {
  int      w, h, row, col;
  uint8_t  r, g, b;
  uint32_t pos = 0;
  uint8_t  sdbuffer[3*BUFFPIXEL]; // pixel buffer (R+G+B per pixel)
  uint8_t  buffidx = sizeof(sdbuffer); // Current position in sdbuffer

  // Crop area to be loaded
  w = img._bmpWidth;
  h = img._bmpHeight;
  if((x+w-1) >= width())  w = width()  - x;
  if((y+h-1) >= height()) h = height() - y;

  /*
  // Set TFT address window to clipped image bounds
  setAddrWindow(x, y, x+w-1, y+h-1);
  */
  
  for (row=0; row<h; row++) { // For each scanline...
    // Seek to start of scan line.  It might seem labor-
    // intensive to be doing this on every line, but this
    // method covers a lot of gritty details like cropping
    // and scanline padding.  Also, the seek only takes
    // place if the file position actually needs to change
    // (avoids a lot of cluster math in SD library).
    if(img._flip) // Bitmap is stored bottom-to-top order (normal BMP)
      pos = img._bmpImageoffset + (img._bmpHeight - 1 - row) * img._rowSize;
    else     // Bitmap is stored top-to-bottom
      pos = img._bmpImageoffset + row * img._rowSize;
    if(img._bmpFile.position() != pos) { // Need seek?
      img._bmpFile.seek(pos);
      buffidx = sizeof(sdbuffer); // Force buffer reload
    }

    for (col=0; col<w; col++) { // For each pixel...
      // Time to read more pixel data?
      if (buffidx >= sizeof(sdbuffer)) { // Indeed
        img._bmpFile.read(sdbuffer, sizeof(sdbuffer));
        buffidx = 0; // Set index to beginning
      }

      // Convert pixel from BMP to TFT format, push to display
      b = sdbuffer[buffidx++];
      g = sdbuffer[buffidx++];
      r = sdbuffer[buffidx++];
      //pushColor(tft.Color565(r,g,b));
      drawPixel(x + col, y + row, newColor(r, g, b));
      
    } // end pixel
  } // end scanline

}




// These read 16- and 32-bit types from the SD card file.
// BMP data is stored little-endian, Arduino is little-endian too.
// May need to reverse subscript order if porting elsewhere.

uint16_t PImage::read16(File f) {
  uint16_t result;
  ((uint8_t *)&result)[0] = f.read(); // LSB
  ((uint8_t *)&result)[1] = f.read(); // MSB
  return result;
}

uint32_t PImage::read32(File f) {
  uint32_t result;
  ((uint8_t *)&result)[0] = f.read(); // LSB
  ((uint8_t *)&result)[1] = f.read();
  ((uint8_t *)&result)[2] = f.read();
  ((uint8_t *)&result)[3] = f.read(); // MSB
  return result;
}


PImage PImage::loadImage(const char * fileName) {
  File     bmpFile;
  int      bmpWidth, bmpHeight;   // W+H in pixels
  uint8_t  bmpDepth;              // Bit depth (currently must be 24)
  uint32_t bmpImageoffset;        // Start of image data in file
  uint32_t rowSize;               // Not always = bmpWidth; may have padding
  bool     flip    = true;        // BMP is stored bottom-to-top


  // Open requested file on SD card
  if ((bmpFile = SD.open(fileName)) == NULL) {
    Serial.print(F("loadImage: file not found: "));
    Serial.println(fileName);
    return PImage(); // load error
  }
  
  
  
  // Parse BMP header
  if(read16(bmpFile) != 0x4D42) { // BMP signature
    Serial.println(F("loadImage: file doesn't look like a BMP"));
    return PImage();
  }
  
  Serial.print(F("File size: ")); Serial.println(read32(bmpFile));
  (void)read32(bmpFile); // Read & ignore creator bytes
  bmpImageoffset = read32(bmpFile); // Start of image data
  Serial.print(F("Image Offset: ")); Serial.println(bmpImageoffset, DEC);
  // Read DIB header
  Serial.print(F("Header size: ")); Serial.println(read32(bmpFile));
  bmpWidth  = read32(bmpFile);
  bmpHeight = read32(bmpFile);
  if(read16(bmpFile) != 1) { // # planes -- must be '1'
    Serial.println(F("loadImage: invalid n. of planes"));
    return PImage();
  }
  
  bmpDepth = read16(bmpFile); // bits per pixel
  Serial.print(F("Bit Depth: ")); Serial.println(bmpDepth);
  if((bmpDepth != 24) || (read32(bmpFile) != 0)) { // 0 = uncompressed {
    Serial.println(F("loadImage: invalid pixel format"));
    return PImage();
  }

  Serial.print(F("Image size: "));
  Serial.print(bmpWidth);
  Serial.print('x');
  Serial.println(bmpHeight);

  // BMP rows are padded (if needed) to 4-byte boundary
  rowSize = (bmpWidth * 3 + 3) & ~3;

  // If bmpHeight is negative, image is in top-down order.
  // This is not canon but has been observed in the wild.
  if(bmpHeight < 0) {
    bmpHeight = -bmpHeight;
    flip      = false;
  }
  
  return PImage(bmpFile, bmpWidth, bmpHeight, bmpDepth, bmpImageoffset, rowSize, flip);
}

#endif

#endif // _ADAFRUIT_GFX_H

	/******************************************************************
	This is the core graphics library for all our displays, providing
	basic graphics primitives (points, lines, circles, etc.). It needs
	to be paired with a hardware-specific library for each display
	device we carry (handling the lower-level functions).

	Adafruit invests time and resources providing this open
	source code, please support Adafruit and open-source hardware
	by purchasing products from Adafruit!

	Written by Limor Fried/Ladyada for Adafruit Industries.
	Processing-like API written by Enrico Gueli for Officine Arduino.
	BSD license, check license.txt for more information.
	All text above must be included in any redistribution.
	******************************************************************/

	#ifndef _ADAFRUIT_GFX_H
	#define _ADAFRUIT_GFX_H

	#if ARDUINO >= 100
	#include "Arduino.h"
	#include "Print.h"
	#else
	#include "WProgram.h"
	#endif

	/*
	* This library can work with or without the presence of an SD
	* reading library (to load images). At the moment, only the
	* Arduino SD library is supported; it is included in
	* standard Arduino libraries.
	*
	* The presence of the SD library is detected by looking at the
	* __SD_H__ preprocessor variable, defined into
	* Arduino SD library to avoid double inclusion. This means
	* that in order to use the image-related API of Adafruit_GFX,
	* SD.h must be included before Adafruit_GFX.
	*
	* The bottom part of this include file contains the actual image
	* loading code; if it was in a separate .cpp file, there were no
	* way to check if the SD library was present or not.
	*
	* A partial solution was to include SD.h anyway, see if that works
	* (i.e. it is found in the include search path) and act accordingly.
	* But this solution relied on the preprocessor to issue only a
	* warning when an include file is not found. Avr-gcc, used for
	* Arduino 8-bit MCUs, does that, but the standard gcc-4.4, used for
	* Arduino Due, issues a fatal error and stops compilation.
	*
	* The best solution so far is to put the code here. It works if this
	* include is used only in one .cpp file in the build (this is the
	* case of most Arduino sketches); if used in multiple .cpp files,
	* the linker may complain about duplicate definitions.
	*
	*/

	#if defined(__SD_H__) // Arduino SD library
	#include "PImage.h"
	#else
	#warning "The SD library was not found. loadImage() and image() won't be supported."
	#endif

	#define swap(a, b) { int16_t t = a; a = b; b = t; }

	/* TODO
	enum RectMode {
	CORNER,
	CORNERS,
	RADIUS,
	CENTER
	};
	*/

	typedef uint16_t color;

	class Adafruit_GFX : public Print {
	public:

	Adafruit_GFX(int16_t w, int16_t h); // Constructor

	// This MUST be defined by the subclass
	virtual void drawPixel(int16_t x, int16_t y, uint16_t color) = 0;



	// These MAY be overridden by the subclass to provide device-specific
	// optimized code. Otherwise 'generic' versions are used.
	virtual void
	drawLine(int16_t x0, int16_t y0, int16_t x1, int16_t y1,
	uint16_t color),
	drawFastVLine(int16_t x, int16_t y, int16_t h, uint16_t color),
	drawFastHLine(int16_t x, int16_t y, int16_t w, uint16_t color),
	drawRect(int16_t x, int16_t y, int16_t w, int16_t h,
	uint16_t color),
	fillRect(int16_t x, int16_t y, int16_t w, int16_t h,
	uint16_t color),
	fillScreen(uint16_t color),
	invertDisplay(boolean i);

	// These exist only with Adafruit_GFX (no subclass overrides)
	void
	drawCircle(int16_t x0, int16_t y0, int16_t r, uint16_t color),
	drawCircleHelper(int16_t x0, int16_t y0,
	int16_t r, uint8_t cornername, uint16_t color),
	fillCircle(int16_t x0, int16_t y0, int16_t r, uint16_t color),
	fillCircleHelper(int16_t x0, int16_t y0, int16_t r,
	uint8_t cornername, int16_t delta, uint16_t color),

	drawTriangle(int16_t x0, int16_t y0, int16_t x1, int16_t y1,
	int16_t x2, int16_t y2, uint16_t color),
	fillTriangle(int16_t x0, int16_t y0, int16_t x1, int16_t y1,
	int16_t x2, int16_t y2, uint16_t color),
	drawRoundRect(int16_t x0, int16_t y0, int16_t w, int16_t h,
	int16_t radius, uint16_t color),
	fillRoundRect(int16_t x0, int16_t y0, int16_t w, int16_t h,
	int16_t radius, uint16_t color),

	drawBitmap(int16_t x, int16_t y,
	const uint8_t *bitmap, int16_t w, int16_t h,
	uint16_t color),
	drawChar(int16_t x, int16_t y, unsigned char c,
	uint16_t color, uint16_t bg, uint8_t size),
	setCursor(int16_t x, int16_t y),
	setTextColor(uint16_t c),
	setTextColor(uint16_t c, uint16_t bg),
	setTextSize(uint8_t s),
	setTextWrap(boolean w),
	setRotation(uint8_t r);

	#if ARDUINO >= 100
	virtual size_t write(uint8_t);
	#else
	virtual void write(uint8_t);
	#endif

	int16_t
	height(void),
	width(void);


	uint8_t getRotation(void);


	/*
	* Processing-like graphics primitives
	*/

	/// transforms a color in 16-bit form given the RGB components.
	/// The default implementation makes a 5-bit red, a 6-bit
	/// green and a 5-bit blue (MSB to LSB). Devices that use
	/// different scheme should override this.
	virtual uint16_t newColor(uint8_t red, uint8_t green, uint8_t blue);


	void
	// http://processing.org/reference/background_.html
	background(uint8_t red, uint8_t green, uint8_t blue),
	background(color c),

	// http://processing.org/reference/fill_.html
	fill(uint8_t red, uint8_t green, uint8_t blue),
	fill(color c),

	// http://processing.org/reference/noFill_.html
	noFill(),

	// http://processing.org/reference/stroke_.html
	stroke(uint8_t red, uint8_t green, uint8_t blue),
	stroke(color c),

	// http://processing.org/reference/noStroke_.html
	noStroke(),

	text(const char * text, int16_t x, int16_t y),
	textWrap(const char * text, int16_t x, int16_t y),

	textSize(uint8_t size),

	// similar to ellipse() in Processing, but with
	// a single radius.
	// http://processing.org/reference/ellipse_.html
	circle(int16_t x, int16_t y, int16_t r),
	point(int16_t x, int16_t y),
	line(int16_t x1, int16_t y1, int16_t x2, int16_t y2),
	quad(int16_t x1, int16_t y1, int16_t x2, int16_t y2, int16_t x3, int16_t y3, int16_t x4, int16_t y4),
	rect(int16_t x, int16_t y, int16_t width, int16_t height),
	rect(int16_t x, int16_t y, int16_t width, int16_t height, int16_t radius),
	triangle(int16_t x1, int16_t y1, int16_t x2, int16_t y2, int16_t x3, int16_t y3);

	/* TODO
	void rectMode(RectMode mode);

	void pushStyle();
	void popStyle();
	*/

	#if defined(__SD_H__) // Arduino SD library
	PImage loadImage(const char * fileName) { return PImage::loadImage(fileName); }

	void image(PImage & img, uint16_t x, uint16_t y);
	#endif

	protected:
	int16_t
	WIDTH, HEIGHT; // this is the 'raw' display w/h - never changes
	int16_t
	_width, _height, // dependent on rotation
	cursor_x, cursor_y;
	uint16_t
	textcolor, textbgcolor;
	uint8_t
	textsize,
	rotation;
	boolean
	wrap; // If set, 'wrap' text at right edge of display

	/*
	* Processing-style graphics state
	*/

	color strokeColor;
	bool useStroke;
	color fillColor;
	bool useFill;
	};

	#if defined(__SD_H__) // Arduino SD library

	#define BUFFPIXEL 20

	void Adafruit_GFX::image(PImage & img, uint16_t x, uint16_t y) {
	int w, h, row, col;
	uint8_t r, g, b;
	uint32_t pos = 0;
	uint8_t sdbuffer[3*BUFFPIXEL]; // pixel buffer (R+G+B per pixel)
	uint8_t buffidx = sizeof(sdbuffer); // Current position in sdbuffer

	// Crop area to be loaded
	w = img._bmpWidth;
	h = img._bmpHeight;
	if((x+w-1) >= width()) w = width() - x;
	if((y+h-1) >= height()) h = height() - y;

	/*
	// Set TFT address window to clipped image bounds
	setAddrWindow(x, y, x+w-1, y+h-1);
	*/

	for (row=0; row<h; row++) { // For each scanline...
	// Seek to start of scan line. It might seem labor-
	// intensive to be doing this on every line, but this
	// method covers a lot of gritty details like cropping
	// and scanline padding. Also, the seek only takes
	// place if the file position actually needs to change
	// (avoids a lot of cluster math in SD library).
	if(img._flip) // Bitmap is stored bottom-to-top order (normal BMP)
	pos = img._bmpImageoffset + (img._bmpHeight - 1 - row) * img._rowSize;
	else // Bitmap is stored top-to-bottom
	pos = img._bmpImageoffset + row * img._rowSize;
	if(img._bmpFile.position() != pos) { // Need seek?
	img._bmpFile.seek(pos);
	buffidx = sizeof(sdbuffer); // Force buffer reload
	}

	for (col=0; col<w; col++) { // For each pixel...
	// Time to read more pixel data?
	if (buffidx >= sizeof(sdbuffer)) { // Indeed
	img._bmpFile.read(sdbuffer, sizeof(sdbuffer));
	buffidx = 0; // Set index to beginning
	}

	// Convert pixel from BMP to TFT format, push to display
	b = sdbuffer[buffidx++];
	g = sdbuffer[buffidx++];
	r = sdbuffer[buffidx++];
	//pushColor(tft.Color565(r,g,b));
	drawPixel(x + col, y + row, newColor(r, g, b));

	} // end pixel
	} // end scanline

	}




	// These read 16- and 32-bit types from the SD card file.
	// BMP data is stored little-endian, Arduino is little-endian too.
	// May need to reverse subscript order if porting elsewhere.

	uint16_t PImage::read16(File f) {
	uint16_t result;
	((uint8_t *)&result)[0] = f.read(); // LSB
	((uint8_t *)&result)[1] = f.read(); // MSB
	return result;
	}

	uint32_t PImage::read32(File f) {
	uint32_t result;
	((uint8_t *)&result)[0] = f.read(); // LSB
	((uint8_t *)&result)[1] = f.read();
	((uint8_t *)&result)[2] = f.read();
	((uint8_t *)&result)[3] = f.read(); // MSB
	return result;
	}


	PImage PImage::loadImage(const char * fileName) {
	File bmpFile;
	int bmpWidth, bmpHeight; // W+H in pixels
	uint8_t bmpDepth; // Bit depth (currently must be 24)
	uint32_t bmpImageoffset; // Start of image data in file
	uint32_t rowSize; // Not always = bmpWidth; may have padding
	bool flip = true; // BMP is stored bottom-to-top


	// Open requested file on SD card
	if ((bmpFile = SD.open(fileName)) == NULL) {
	Serial.print(F("loadImage: file not found: "));
	Serial.println(fileName);
	return PImage(); // load error
	}



	// Parse BMP header
	if(read16(bmpFile) != 0x4D42) { // BMP signature
	Serial.println(F("loadImage: file doesn't look like a BMP"));
	return PImage();
	}

	Serial.print(F("File size: ")); Serial.println(read32(bmpFile));
	(void)read32(bmpFile); // Read & ignore creator bytes
	bmpImageoffset = read32(bmpFile); // Start of image data
	Serial.print(F("Image Offset: ")); Serial.println(bmpImageoffset, DEC);
	// Read DIB header
	Serial.print(F("Header size: ")); Serial.println(read32(bmpFile));
	bmpWidth = read32(bmpFile);
	bmpHeight = read32(bmpFile);
	if(read16(bmpFile) != 1) { // # planes -- must be '1'
	Serial.println(F("loadImage: invalid n. of planes"));
	return PImage();
	}

	bmpDepth = read16(bmpFile); // bits per pixel
	Serial.print(F("Bit Depth: ")); Serial.println(bmpDepth);
	if((bmpDepth != 24) \|\| (read32(bmpFile) != 0)) { // 0 = uncompressed {
	Serial.println(F("loadImage: invalid pixel format"));
	return PImage();
	}

	Serial.print(F("Image size: "));
	Serial.print(bmpWidth);
	Serial.print('x');
	Serial.println(bmpHeight);

	// BMP rows are padded (if needed) to 4-byte boundary
	rowSize = (bmpWidth * 3 + 3) & ~3;

	// If bmpHeight is negative, image is in top-down order.
	// This is not canon but has been observed in the wild.
	if(bmpHeight < 0) {
	bmpHeight = -bmpHeight;
	flip = false;
	}

	return PImage(bmpFile, bmpWidth, bmpHeight, bmpDepth, bmpImageoffset, rowSize, flip);
	}

	#endif

	#endif // _ADAFRUIT_GFX_H