Datasets:

Continual-Learning-Exam
/

CLE-Lite-Workspaces

#!/bin/bash
# ========================================================================
# Start script for IIC docker images (VNC)
#
# SPDX-FileCopyrightText: 2022-2023 Harald Pretl and Georg Zachl
# Johannes Kepler University, Institute for Integrated Circuits
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0
# ========================================================================

if [ -n "${DRY_RUN}" ]; then
	echo "[INFO] This is a dry run, all commands will be printed to the shell (Commands printed but not executed are marked with $)!"
	ECHO_IF_DRY_RUN="echo $"
fi

# SET YOUR DESIGN PATH RIGHT!
DESIGNS="$(realpath "$(dirname "${BASH_SOURCE[0]}")/..")"

if [ -z ${DESIGNS+z} ]; then
	DESIGNS=$HOME/eda/designs
	if [ ! -d "$DESIGNS" ]; then
		${ECHO_IF_DRY_RUN} mkdir -p "$DESIGNS"
	fi
	echo "[INFO] Design directory auto-set to $DESIGNS."
fi

# Set the host ports, and disable them with 0. Only used if not set as shell variables!
if [ -z ${WEBSERVER_PORT+z} ]; then
	WEBSERVER_PORT=80
fi
if [ -z ${VNC_PORT+z} ]; then
	VNC_PORT=5901
fi

if [ -z ${DOCKER_USER+z} ]; then
	DOCKER_USER="hpretl"
fi

if [ -z ${DOCKER_IMAGE+z} ]; then
	DOCKER_IMAGE="iic-osic-tools"
fi

if [ -z ${DOCKER_TAG+z} ]; then
	DOCKER_TAG="2025.12"
fi

if [ -z ${CONTAINER_NAME+z} ]; then
	CONTAINER_NAME="iic-osic-tools_xvnc_uid_"$(id -u)
fi

if [[ "$OSTYPE" == "linux"* ]]; then
	if [ -z ${CONTAINER_USER+z} ]; then
	        CONTAINER_USER=$(id -u)
	fi

	if [ -z ${CONTAINER_GROUP+z} ]; then
	        CONTAINER_GROUP=$(id -g)
	fi
else
	if [ -z ${CONTAINER_USER+z} ]; then
			CONTAINER_USER=1000
	fi

	if [ -z ${CONTAINER_GROUP+z} ]; then
			CONTAINER_GROUP=1000
	fi
fi

# Check for UIDs and GIDs below 1000, except 0 (root)
if [[ ${CONTAINER_USER} -ne 0 ]]  &&  [[ ${CONTAINER_USER} -lt 1000 ]]; then
        prt_str="# [WARNING] Selected User ID ${CONTAINER_USER} is below 1000. This ID might interfere with User-IDs inside the container and cause undefined behavior! #"
        printf -- '#%.0s' $(seq 1 ${#prt_str})
        echo
        echo "${prt_str}"
        printf -- '#%.0s' $(seq 1 ${#prt_str})
        echo
fi

if [[ ${CONTAINER_GROUP} -ne 0 ]]  && [[ ${CONTAINER_GROUP} -lt 1000 ]]; then
        prt_str="# [WARNING] Selected Group ID ${CONTAINER_GROUP} is below 1000. This ID might interfere with Group-IDs inside the container and cause undefined behavior! #"
        printf -- '#%.0s' $(seq 1 ${#prt_str})
        echo
        echo "${prt_str}"
        printf -- '#%.0s' $(seq 1 ${#prt_str})
        echo
fi

# Processing ports and other parameters
PARAMS=""
if [ "$WEBSERVER_PORT" -gt 0 ]; then
	PARAMS="$PARAMS -p $WEBSERVER_PORT:80"
fi
if [ "$VNC_PORT" -gt 0 ]; then
	PARAMS="$PARAMS -p $VNC_PORT:5901"
fi

if [ -n "${VNC_PW}" ]; then
	PARAMS="${PARAMS} -e VNC_PW=${VNC_PW}"
fi

if [ -n "${DOCKER_EXTRA_PARAMS}" ]; then
	PARAMS="${PARAMS} ${DOCKER_EXTRA_PARAMS}"
fi

# Check if the container exists and if it is running.
if [ "$(docker ps -q -f name="${CONTAINER_NAME}")" ]; then
	echo "[WARNING] Container is running!"
	echo "[HINT] It can also be stopped with \"docker stop ${CONTAINER_NAME}\" and removed with \"docker rm ${CONTAINER_NAME}\" if required."
	echo
	echo -n "Press \"s\" to stop, and \"r\" to stop & remove: "
	read -r -n 1 k <&1
	echo
	if [[ $k = s ]] ; then
		${ECHO_IF_DRY_RUN} docker stop "${CONTAINER_NAME}"
	elif [[ $k = r ]] ; then
		${ECHO_IF_DRY_RUN} docker stop "${CONTAINER_NAME}"
		${ECHO_IF_DRY_RUN} docker rm "${CONTAINER_NAME}"
	fi
# If the container exists but is exited, it is restarted.
elif [ "$(docker ps -aq -f name="${CONTAINER_NAME}")" ]; then
	echo "[WARNING] Container ${CONTAINER_NAME} exists."
	echo "[HINT] It can also be restarted with \"docker start ${CONTAINER_NAME}\" or removed with \"docker rm ${CONTAINER_NAME}\" if required."
	echo
	echo -n "Press \"s\" to start, and \"r\" to remove: "
	read -r -n 1 k <&1
	echo
	if [[ $k = s ]] ; then
		${ECHO_IF_DRY_RUN} docker start "${CONTAINER_NAME}"
	elif [[ $k = r ]] ; then
		${ECHO_IF_DRY_RUN} docker rm "${CONTAINER_NAME}"
	fi
else
	echo "[INFO] Container does not exist, creating ${CONTAINER_NAME} ..."
	# Finally, run the container, and sets DISPLAY to the local display number
	#${ECHO_IF_DRY_RUN} docker pull "${DOCKER_USER}/${DOCKER_IMAGE}:${DOCKER_TAG}"
	# Disable SC2086, $PARAMS must be globbed and splitted.
	# shellcheck disable=SC2086
	${ECHO_IF_DRY_RUN} docker run -d --user "${CONTAINER_USER}:${CONTAINER_GROUP}" $PARAMS -v "$DESIGNS:/foss/designs:rw" --name "${CONTAINER_NAME}" "${DOCKER_USER}/${DOCKER_IMAGE}:${DOCKER_TAG}"
fi

	#!/bin/bash
	# ========================================================================
	# Start script for IIC docker images (VNC)
	#
	# SPDX-FileCopyrightText: 2022-2023 Harald Pretl and Georg Zachl
	# Johannes Kepler University, Institute for Integrated Circuits
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	# SPDX-License-Identifier: Apache-2.0
	# ========================================================================

	if [ -n "${DRY_RUN}" ]; then
	echo "[INFO] This is a dry run, all commands will be printed to the shell (Commands printed but not executed are marked with $)!"
	ECHO_IF_DRY_RUN="echo $"
	fi

	# SET YOUR DESIGN PATH RIGHT!
	DESIGNS="$(realpath "$(dirname "${BASH_SOURCE[0]}")/..")"

	if [ -z ${DESIGNS+z} ]; then
	DESIGNS=$HOME/eda/designs
	if [ ! -d "$DESIGNS" ]; then
	${ECHO_IF_DRY_RUN} mkdir -p "$DESIGNS"
	fi
	echo "[INFO] Design directory auto-set to $DESIGNS."
	fi

	# Set the host ports, and disable them with 0. Only used if not set as shell variables!
	if [ -z ${WEBSERVER_PORT+z} ]; then
	WEBSERVER_PORT=80
	fi
	if [ -z ${VNC_PORT+z} ]; then
	VNC_PORT=5901
	fi

	if [ -z ${DOCKER_USER+z} ]; then
	DOCKER_USER="hpretl"
	fi

	if [ -z ${DOCKER_IMAGE+z} ]; then
	DOCKER_IMAGE="iic-osic-tools"
	fi

	if [ -z ${DOCKER_TAG+z} ]; then
	DOCKER_TAG="2025.12"
	fi

	if [ -z ${CONTAINER_NAME+z} ]; then
	CONTAINER_NAME="iic-osic-tools_xvnc_uid_"$(id -u)
	fi

	if [[ "$OSTYPE" == "linux"* ]]; then
	if [ -z ${CONTAINER_USER+z} ]; then
	CONTAINER_USER=$(id -u)
	fi

	if [ -z ${CONTAINER_GROUP+z} ]; then
	CONTAINER_GROUP=$(id -g)
	fi
	else
	if [ -z ${CONTAINER_USER+z} ]; then
	CONTAINER_USER=1000
	fi

	if [ -z ${CONTAINER_GROUP+z} ]; then
	CONTAINER_GROUP=1000
	fi
	fi

	# Check for UIDs and GIDs below 1000, except 0 (root)
	if [[ ${CONTAINER_USER} -ne 0 ]] && [[ ${CONTAINER_USER} -lt 1000 ]]; then
	prt_str="# [WARNING] Selected User ID ${CONTAINER_USER} is below 1000. This ID might interfere with User-IDs inside the container and cause undefined behavior! #"
	printf -- '#%.0s' $(seq 1 ${#prt_str})
	echo
	echo "${prt_str}"
	printf -- '#%.0s' $(seq 1 ${#prt_str})
	echo
	fi

	if [[ ${CONTAINER_GROUP} -ne 0 ]] && [[ ${CONTAINER_GROUP} -lt 1000 ]]; then
	prt_str="# [WARNING] Selected Group ID ${CONTAINER_GROUP} is below 1000. This ID might interfere with Group-IDs inside the container and cause undefined behavior! #"
	printf -- '#%.0s' $(seq 1 ${#prt_str})
	echo
	echo "${prt_str}"
	printf -- '#%.0s' $(seq 1 ${#prt_str})
	echo
	fi

	# Processing ports and other parameters
	PARAMS=""
	if [ "$WEBSERVER_PORT" -gt 0 ]; then
	PARAMS="$PARAMS -p $WEBSERVER_PORT:80"
	fi
	if [ "$VNC_PORT" -gt 0 ]; then
	PARAMS="$PARAMS -p $VNC_PORT:5901"
	fi

	if [ -n "${VNC_PW}" ]; then
	PARAMS="${PARAMS} -e VNC_PW=${VNC_PW}"
	fi

	if [ -n "${DOCKER_EXTRA_PARAMS}" ]; then
	PARAMS="${PARAMS} ${DOCKER_EXTRA_PARAMS}"
	fi

	# Check if the container exists and if it is running.
	if [ "$(docker ps -q -f name="${CONTAINER_NAME}")" ]; then
	echo "[WARNING] Container is running!"
	echo "[HINT] It can also be stopped with \"docker stop ${CONTAINER_NAME}\" and removed with \"docker rm ${CONTAINER_NAME}\" if required."
	echo
	echo -n "Press \"s\" to stop, and \"r\" to stop & remove: "
	read -r -n 1 k <&1
	echo
	if [[ $k = s ]] ; then
	${ECHO_IF_DRY_RUN} docker stop "${CONTAINER_NAME}"
	elif [[ $k = r ]] ; then
	${ECHO_IF_DRY_RUN} docker stop "${CONTAINER_NAME}"
	${ECHO_IF_DRY_RUN} docker rm "${CONTAINER_NAME}"
	fi
	# If the container exists but is exited, it is restarted.
	elif [ "$(docker ps -aq -f name="${CONTAINER_NAME}")" ]; then
	echo "[WARNING] Container ${CONTAINER_NAME} exists."
	echo "[HINT] It can also be restarted with \"docker start ${CONTAINER_NAME}\" or removed with \"docker rm ${CONTAINER_NAME}\" if required."
	echo
	echo -n "Press \"s\" to start, and \"r\" to remove: "
	read -r -n 1 k <&1
	echo
	if [[ $k = s ]] ; then
	${ECHO_IF_DRY_RUN} docker start "${CONTAINER_NAME}"
	elif [[ $k = r ]] ; then
	${ECHO_IF_DRY_RUN} docker rm "${CONTAINER_NAME}"
	fi
	else
	echo "[INFO] Container does not exist, creating ${CONTAINER_NAME} ..."
	# Finally, run the container, and sets DISPLAY to the local display number
	#${ECHO_IF_DRY_RUN} docker pull "${DOCKER_USER}/${DOCKER_IMAGE}:${DOCKER_TAG}"
	# Disable SC2086, $PARAMS must be globbed and splitted.
	# shellcheck disable=SC2086
	${ECHO_IF_DRY_RUN} docker run -d --user "${CONTAINER_USER}:${CONTAINER_GROUP}" $PARAMS -v "$DESIGNS:/foss/designs:rw" --name "${CONTAINER_NAME}" "${DOCKER_USER}/${DOCKER_IMAGE}:${DOCKER_TAG}"
	fi