Datasets:
Add files using upload-large-folder tool
Browse filesThis view is limited to 50 files because it contains too many changes. See raw diff
- marked/M/T-REC-M.100-198811-I_PDF-E/raw.md +164 -0
- marked/M/T-REC-M.1012-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.1012-198811-I_PDF-E/raw.md +106 -0
- marked/M/T-REC-M.1013-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.1014-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.1015-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.1015-198811-I_PDF-E/9e6062272bbe3ddbb7c0606721d64cf0_img.jpg +3 -0
- marked/M/T-REC-M.1015-198811-I_PDF-E/d62e2e2281009c16f4ee61660e716cd9_img.jpg +3 -0
- marked/M/T-REC-M.1015-198811-I_PDF-E/f9a14fbfecbd7d059226cc93677d721b_img.jpg +3 -0
- marked/M/T-REC-M.1020-199303-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.1020-199303-I_PDF-E/431b8889a0e7f676f0eef40859590349_img.jpg +3 -0
- marked/M/T-REC-M.1020-199303-I_PDF-E/68aa26525c9346e4590a15c75d394e9d_img.jpg +3 -0
- marked/M/T-REC-M.1020-199303-I_PDF-E/ac99eff233b8fe51d30f499e7413c345_img.jpg +3 -0
- marked/M/T-REC-M.1025-199303-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.1025-199303-I_PDF-E/4086a572c080354982c11f1de4d6921d_img.jpg +3 -0
- marked/M/T-REC-M.1025-199303-I_PDF-E/55d2bfe1c3d04e86df8d7a104d802172_img.jpg +3 -0
- marked/M/T-REC-M.1025-199303-I_PDF-E/925f55ce69802b9d3b00546382663ee2_img.jpg +3 -0
- marked/M/T-REC-M.1030-198811-I_PDF-E/raw.md +160 -0
- marked/M/T-REC-M.1045-199605-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.1050-199806-I_PDF-E/raw.md +619 -0
- marked/M/T-REC-M.1060-198811-I_PDF-E/2df09d249c38abee55dbf0526dd6da0a_img.jpg +3 -0
- marked/M/T-REC-M.1060-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.110-198811-I_PDF-E/raw.md +148 -0
- marked/M/T-REC-M.1130-199210-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.1130-199210-I_PDF-E/6ed175c791b5e156d9c98a8dbcc3318c_img.jpg +3 -0
- marked/M/T-REC-M.1140-199210-I_PDF-E/2763901b7a1fd1b5d704cdc450d12ed0_img.jpg +3 -0
- marked/M/T-REC-M.1140-199210-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.1140-199210-I_PDF-E/547f726730e589392f239257a833ede3_img.jpg +3 -0
- marked/M/T-REC-M.1140-199210-I_PDF-E/6ed175c791b5e156d9c98a8dbcc3318c_img.jpg +3 -0
- marked/M/T-REC-M.1140-199210-I_PDF-E/e6b5ee67ac260b0a3ed3e3c5ad7ea19c_img.jpg +3 -0
- marked/M/T-REC-M.1140-199210-I_PDF-E/e6df2733626a85205c1db682e6259c46_img.jpg +3 -0
- marked/M/T-REC-M.1160-199704-I_PDF-E/raw.md +415 -0
- marked/M/T-REC-M.1170-199704-I_PDF-E/raw.md +393 -0
- marked/M/T-REC-M.1230-199605-I_PDF-E/raw.md +464 -0
- marked/M/T-REC-M.1235-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.125-198811-I_PDF-E/191a4a245a7d36d03be9a990d0f758f5_img.jpg +3 -0
- marked/M/T-REC-M.125-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.125-198811-I_PDF-E/aa81b9b80bd1e3d723922b3a033564a2_img.jpg +3 -0
- marked/M/T-REC-M.125-198811-I_PDF-E/d62e2e2281009c16f4ee61660e716cd9_img.jpg +3 -0
- marked/M/T-REC-M.125-198811-I_PDF-E/d980a3f9608055996a07f31788baf827_img.jpg +3 -0
- marked/M/T-REC-M.125-198811-I_PDF-E/raw.md +203 -0
- marked/M/T-REC-M.1300-199710-I_PDF-E/raw.md +460 -0
- marked/M/T-REC-M.1301-200101-I_PDF-E/raw.md +689 -0
- marked/M/T-REC-M.1320-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.1320-198811-I_PDF-E/aec7150315249ac202a63cc0e32323b8_img.jpg +3 -0
- marked/M/T-REC-M.1320-198811-I_PDF-E/raw.md +91 -0
- marked/M/T-REC-M.1340-200002-I_PDF-E/26d664119ad25250780f554633444e54_img.jpg +3 -0
- marked/M/T-REC-M.1340-200002-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg +3 -0
- marked/M/T-REC-M.1340-200002-I_PDF-E/366a77fdefb0097b3289b4a011911390_img.jpg +3 -0
- marked/M/T-REC-M.1340-200002-I_PDF-E/58f4167687de8d7339594e5f6fbe0bc6_img.jpg +3 -0
marked/M/T-REC-M.100-198811-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,164 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
The logo of the International Telecommunication Union (ITU) features the letters 'ITU' in a bold, sans-serif font, superimposed on a stylized globe with intersecting lines.
|
| 6 |
+
|
| 7 |
+
ITU logo
|
| 8 |
+
|
| 9 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 10 |
+
|
| 11 |
+
**ITU-T**
|
| 12 |
+
|
| 13 |
+
**M.100**
|
| 14 |
+
|
| 15 |
+
TELECOMMUNICATION
|
| 16 |
+
STANDARDIZATION SECTOR
|
| 17 |
+
OF ITU
|
| 18 |
+
|
| 19 |
+
**MAINTENANCE :
|
| 20 |
+
INTRODUCTION AND GENERAL PRINCIPLES**
|
| 21 |
+
|
| 22 |
+
---
|
| 23 |
+
|
| 24 |
+
**SERVICE CIRCUITS**
|
| 25 |
+
|
| 26 |
+
**ITU-T Recommendation M.100**
|
| 27 |
+
|
| 28 |
+
(Extract from the *Blue Book*)
|
| 29 |
+
|
| 30 |
+
---
|
| 31 |
+
|
| 32 |
+
# NOTES
|
| 33 |
+
|
| 34 |
+
1 ITU-T Recommendation M.100 was published in Fascicle IV.1 of the *Blue Book*. This file is an extract from the *Blue Book*. While the presentation and layout of the text might be slightly different from the *Blue Book* version, the contents of the file are identical to the *Blue Book* version and copyright conditions remain unchanged (see below).
|
| 35 |
+
|
| 36 |
+
2 In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 37 |
+
|
| 38 |
+
© ITU 1988, 1993
|
| 39 |
+
|
| 40 |
+
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU.
|
| 41 |
+
|
| 42 |
+
# **SERVICE CIRCUITS**
|
| 43 |
+
|
| 44 |
+
To facilitate the general maintenance of the international telephone network, *service circuits* should be set up as may be necessary between relevant maintenance units taking part in the international service.
|
| 45 |
+
|
| 46 |
+
For the purposes of this Recommendation, a distinction is made between the following types of service circuit:
|
| 47 |
+
|
| 48 |
+
- **Direct service circuit**: a telephone or teleprinter (teletypewriter) service circuit serving only two stations and linking them directly.
|
| 49 |
+
|
| 50 |
+
*Note* – It will also be necessary to consider the communications required by technical staff for setting up and maintaining very long circuits routed over a number of major systems in tandem, e.g. London-Singapore circuits. These may require service circuits to be interconnected.
|
| 51 |
+
|
| 52 |
+
- **Omnibus service circuit** (see Figure 1/M.100 below): a telephone or teleprinter (teletypewriter) service circuit serving more than two stations connected in series, any or all of which may make connection to the service circuit simultaneously.
|
| 53 |
+
- **Multiterminal service circuit** (see Figure 2/M.100 below): a telephone or teleprinter (teletypewriter) service circuit serving more than two stations and having at least one branching point. On each *branch* of this circuit a certain number of stations can be connected in series. Every station served can enter the circuit individually.
|
| 54 |
+
|
| 55 |
+
*Note* – Attention is drawn to the possible use of selective signalling on omnibus and multiterminal service circuits and to the problems that may arise in achieving the necessary stability on such circuits.
|
| 56 |
+
|
| 57 |
+
It is recommended that for the maintenance of international circuits:
|
| 58 |
+
|
| 59 |
+
- 1) all attended stations should be connected direct to the public telephone network;
|
| 60 |
+
- 2) the terminal stations of an international system should be provided with a direct telephone service circuit;
|
| 61 |
+
- 3) terminal and intermediate stations on an international system should be provided with an omnibus telephone service circuit;
|
| 62 |
+
- 4) where the provision of direct teleprinter (teletypewriter) service circuits is impracticable or uneconomical, important repeater stations on international routes should be provided with international telex facilities;
|
| 63 |
+
|
| 64 |
+
The equipment of the telegraph local end used on service telegraph circuits must be capable of transmitting and receiving signals conforming to International Telegraph Alphabet No. 2 and must be in accordance with the provisions of CCITT Recommendations;
|
| 65 |
+
|
| 66 |
+
- 5) maintenance staff responsible for international circuits should have authority to make priority calls in the international telephone service [1];
|
| 67 |
+
|
| 68 |
+

|
| 69 |
+
|
| 70 |
+
The diagram illustrates an omnibus service circuit with two parallel transmission paths. The top path represents the 'send' direction, starting from a terminal station 'A' (marked with 'T' and an arrow pointing right) and passing through intermediate stations 'C', 'D', and 'E' (each marked with 'T' and an arrow pointing right). It ends at terminal station 'B' (marked with 'T'). The bottom path represents the 'receive' direction, starting from terminal station 'B' and passing through the same intermediate stations 'E', 'D', and 'C' (each marked with 'R' and an arrow pointing left) back to terminal station 'A' (marked with 'R'). A box containing the letter 'I' (representing an attenuator) is connected between the two paths at station 'B'.
|
| 71 |
+
|
| 72 |
+
CCITT - 36501
|
| 73 |
+
d01-sc
|
| 74 |
+
|
| 75 |
+
T ○ → send
|
| 76 |
+
|
| 77 |
+
R ○ → receive
|
| 78 |
+
|
| 79 |
+
**A B** terminal international centres or terminal repeater stations
|
| 80 |
+
|
| 81 |
+
**C D E** intermediate international centres or intermediate repeater stations
|
| 82 |
+
|
| 83 |
+
**[I]** attenuator looping the two directions of transmission
|
| 84 |
+
|
| 85 |
+
Diagram of an omnibus service circuit showing send and receive paths between terminal and intermediate stations.
|
| 86 |
+
|
| 87 |
+
FIGURE 1/M.100
|
| 88 |
+
Example of an omnibus service circuit
|
| 89 |
+
|
| 90 |
+

|
| 91 |
+
|
| 92 |
+
The diagram illustrates a multiterminal service circuit. A horizontal main line connects terminal international centres or terminal repeater stations A, G, E, H, F, J, and B. Station A is on the left, and station B is on the right. Intermediate international centres or intermediate repeater stations G, H, and J are located along this main line. Branching off the main line are two sets of stations: one set consisting of C, I, and D, and another consisting of K and D. Station C is connected to station I, which is connected to station D. Station K is also connected to station D. Each station is represented by a rectangle. Squares containing the letter 'I' represent attenuators that loop the two directions of transmission. Arrows indicate the direction of transmission: 'T' for send and 'R' for receive. The diagram shows how these service circuits are interconnected between various points in the network.
|
| 93 |
+
|
| 94 |
+
Diagram of a multiterminal service circuit showing a main line with stations A, G, E, H, F, J, B. Branching stations C, I, K, D are connected to the main line. Arrows indicate 'send' (T) and 'receive' (R) directions. Squares with 'I' represent attenuators.
|
| 95 |
+
|
| 96 |
+
CCITT - 36511
|
| 97 |
+
|
| 98 |
+
d02-sc
|
| 99 |
+
|
| 100 |
+
T ○ → send
|
| 101 |
+
|
| 102 |
+
R ○ → receive
|
| 103 |
+
|
| 104 |
+
A B C D terminal international centres or terminal repeater stations
|
| 105 |
+
|
| 106 |
+
E F international centres (or repeater stations) with branching facilities
|
| 107 |
+
|
| 108 |
+
G H I J K intermediate international centres or intermediate repeater stations
|
| 109 |
+
|
| 110 |
+
I attenuator looping the two directions of transmission
|
| 111 |
+
|
| 112 |
+
FIGURE 2/M.100
|
| 113 |
+
|
| 114 |
+
## **Multiterminal service circuit**
|
| 115 |
+
|
| 116 |
+
- 6) all service circuits should in general conform to the Recommendations of the CCITT in respect of their quality and maintenance. However, service circuits may have a restricted quality which must nevertheless be such as to provide efficient communication when maintenance personnel have to use languages other than their mother tongue;
|
| 117 |
+
- 7) in the event of a major interruption involving service circuits, these should be accorded priority in restoration;
|
| 118 |
+
- 8) the terminal stations of a long international submarine cable system should be provided with a direct teleprinter (teletypewriter) service circuit;
|
| 119 |
+
- 9) terminal and intermediate stations on a long international submarine cable system should be provided with an omnibus teleprinter (teletypewriter) service circuit.
|
| 120 |
+
|
| 121 |
+
The CCIR has issued Recommendation 400-2 concerning service circuits for radio-relay links. (For the convenience of readers, this Recommendation is reproduced below. CCIR Report 444 [2] also applies.)
|
| 122 |
+
|
| 123 |
+
# **SERVICE CHANNELS TO BE PROVIDED FOR THE OPERATION AND MAINTENANCE OF RADIO-RELAY SYSTEMS**
|
| 124 |
+
|
| 125 |
+
(Question 4/9, Geneva, 1982)
|
| 126 |
+
|
| 127 |
+
(1956 – 1959 – 1963 – 1966 – 1970)
|
| 128 |
+
|
| 129 |
+
The CCIR,
|
| 130 |
+
|
| 131 |
+
# CONSIDERING
|
| 132 |
+
|
| 133 |
+
- a)* that service channels are required for the maintenance, supervision and control of radio-relay systems;
|
| 134 |
+
- b)* that if, for any reason, the radio-relay system itself fails to function, communication between various stations along the route, and from those stations to other points is likely to assume special importance;
|
| 135 |
+
- c)* that agreement is desirable on the number and function of the service channels to facilitate the planning of radio-relay systems;
|
| 136 |
+
- d)* that service channels will be used to provide:
|
| 137 |
+
- omnibus voice circuits,
|
| 138 |
+
- express voice circuits,
|
| 139 |
+
- supervisory circuits,
|
| 140 |
+
- control and operational circuits;
|
| 141 |
+
- e)* that service channels will not be connected to the public telephone network,
|
| 142 |
+
|
| 143 |
+
# UNANIMOUSLY RECOMMENDS
|
| 144 |
+
|
| 145 |
+
that, on international radio-relay systems:
|
| 146 |
+
|
| 147 |
+
1. all staffed stations should be connected directly to the public telephone network;
|
| 148 |
+
2. when a radio-relay link is extended by means of short cable sections, and these cable sections and the radio-relay link taken together constitute a regulated line section, the terminal stations of the radio-relay link itself should have speaker circuits to the stations at the ends of the regulated line section;
|
| 149 |
+
3. a telephone service channel (omnibus voice circuit) should be set up to connect together all the stations on the system, whether staffed or not;
|
| 150 |
+
4. a second telephone service channel (express voice circuit) should be provided for direct telephonic communication between the staffed stations receiving supervisory signals;
|
| 151 |
+
5. provisions for the transmission of supervisory and control signals should be subject to agreement between the Administrations concerned;
|
| 152 |
+
6. the telephone service channels should possess, whenever possible, the characteristics (excluding noise power) recommended by the CCITT for international telephone circuits and, in particular, should be able to transmit the frequency band 300 to 3400 Hz;
|
| 153 |
+
7. all telephone service channels (including those used for supervisory and control circuits) up to a length of 280 km should, whenever possible, not exceed a mean noise power in any hour of 20 000 pW0p psophometrically weighted, at a point of zero relative level.
|
| 154 |
+
|
| 155 |
+
*Note* – Service channels may be provided over an auxiliary radio-relay system, over the main radio-relay system, or by other unrelated means, either on a primary or stand-by basis. In the case of express voice circuits, the use of regular multiplex channels within the telephony baseband is acceptable, where this is possible.
|
| 156 |
+
|
| 157 |
+
# **References**
|
| 158 |
+
|
| 159 |
+
- [1] CCITT, *Instructions for the International Telephone Service*, Articles 46 to 49, ITU, Geneva, 1985.
|
| 160 |
+
- [2] CCIR Report *Service channels for analogue radio-relay systems*, Vol. IX, Report 444, ITU, Geneva, 1986.
|
| 161 |
+
|
| 162 |
+
---
|
| 163 |
+
|
| 164 |
+
\* This Recommendation applies to radio-relay systems which will transmit at least 60 telephone channels or a television signal and comprise two staffed terminal stations, in which the signals are demodulated to baseband, and any number of unstaffed intermediate stations, This Recommendation applies, where appropriate, to trans-horizon radio-relay systems.
|
marked/M/T-REC-M.1012-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1012-198811-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,106 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
The logo of the International Telecommunication Union (ITU) features the letters 'ITU' in a bold, sans-serif font, superimposed on a stylized globe with intersecting lines.
|
| 6 |
+
|
| 7 |
+
ITU logo
|
| 8 |
+
|
| 9 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 10 |
+
|
| 11 |
+
**ITU-T**
|
| 12 |
+
|
| 13 |
+
**M.1012**
|
| 14 |
+
|
| 15 |
+
TELECOMMUNICATION
|
| 16 |
+
STANDARDIZATION SECTOR
|
| 17 |
+
OF ITU
|
| 18 |
+
|
| 19 |
+
**MAINTENANCE:
|
| 20 |
+
INTERNATIONAL LEASED CIRCUITS**
|
| 21 |
+
|
| 22 |
+
---
|
| 23 |
+
|
| 24 |
+
**CIRCUIT CONTROL STATION FOR
|
| 25 |
+
LEASED AND SPECIAL CIRCUITS**
|
| 26 |
+
|
| 27 |
+
**ITU-T Recommendation M.1012**
|
| 28 |
+
|
| 29 |
+
(Extract from the *Blue Book*)
|
| 30 |
+
|
| 31 |
+
---
|
| 32 |
+
|
| 33 |
+
# NOTES
|
| 34 |
+
|
| 35 |
+
1 ITU-T Recommendation M.1012 was published in Fascicle IV.2 of the *Blue Book*. This file is an extract from the *Blue Book*. While the presentation and layout of the text might be slightly different from the *Blue Book* version, the contents of the file are identical to the *Blue Book* version and copyright conditions remain unchanged (see below).
|
| 36 |
+
|
| 37 |
+
2 In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 38 |
+
|
| 39 |
+
## **CIRCUIT CONTROL STATION FOR LEASED AND SPECIAL CIRCUITS**
|
| 40 |
+
|
| 41 |
+
### **1 Definition of circuit control station**
|
| 42 |
+
|
| 43 |
+
The circuit control station is that point within the general maintenance organization which fulfils the control responsibilities for leased and special circuits, for example circuits used for voice-frequency telegraphy, facsimile and phototelegraphy.
|
| 44 |
+
|
| 45 |
+
### **2 Responsibilities**
|
| 46 |
+
|
| 47 |
+
The circuit control station is responsible for ensuring that the circuit assigned to it is set up and maintained to the required end-to-end standards in both directions of transmission and that, if the circuit fails, the outage time is kept to a minimum. The circuit control station carries out this responsibility by directing, and/or coordinating other stations as necessary to ensure that satisfactory service is provided for which it has been assigned control.
|
| 48 |
+
|
| 49 |
+
### **3 Functions**
|
| 50 |
+
|
| 51 |
+
3.1 Arranging for the setting up of the circuit and of the signalling equipment associated directly with the circuit and the related adjustments.
|
| 52 |
+
|
| 53 |
+
3.2 Controlling transmission measurements for the setting up and lining up of international circuits to within the recommended limits and keeping records of reference measurements (initial measurements).
|
| 54 |
+
|
| 55 |
+
3.3 Receiving fault reports from the:
|
| 56 |
+
|
| 57 |
+
- circuit user or his representative, either directly or via nominated fault report points;
|
| 58 |
+
- staff at the maintenance entities;
|
| 59 |
+
- transmission maintenance point (international line) (TMP-IL) (see Recommendation M.1014);
|
| 60 |
+
- sub-control station either directly or via the TMP-II.
|
| 61 |
+
|
| 62 |
+
When the circuit control station receives a fault report from the circuit sub-control station a unique reference number should be issued and given to the sub-control station. (If national practices already involve the issue of a unique reference number this may be used.)<sup>1)</sup> The reference number is recorded with the fault report by both the circuit control and sub-control stations.
|
| 63 |
+
|
| 64 |
+
3.4 Controlling routine maintenance measurements and tests on the due dates if scheduled, using the specified methods and in such a way that interruptions to service are limited to the shortest possible durations.
|
| 65 |
+
|
| 66 |
+
3.5 Obtaining cooperation from the circuit sub-control station, either directly or via the TMP-IL.
|
| 67 |
+
|
| 68 |
+
3.6 Directing the location of faults to the national line or the terminal national section in its own country, or beyond the national line to the international line, or to a foreign country.
|
| 69 |
+
|
| 70 |
+
3.7 Controlling the withdrawal of circuits from service.
|
| 71 |
+
|
| 72 |
+
3.8 Controlling the return of circuits to service, for example, after fault clearance, routine measurements, etc.
|
| 73 |
+
|
| 74 |
+
3.9 Arranging for withdrawal of circuits from service with the customer.
|
| 75 |
+
|
| 76 |
+
3.10 Keeping records of the routing of the leased and special circuits.
|
| 77 |
+
|
| 78 |
+
3.11 Knowing the possibilities of rerouting any circuit under its control.
|
| 79 |
+
|
| 80 |
+
---
|
| 81 |
+
|
| 82 |
+
<sup>1)</sup> Where no such unique reference number exists, Administrations may wish to consider a format containing the following elements: serial number/day of month/time (e.g. 47/03/1400G).
|
| 83 |
+
|
| 84 |
+
3.12 Advising the customer (or ensuring that this be done) of the progress of fault clearance if appropriate, for example in the case of lengthy outages, and ensuring that the customer is advised when the fault has been corrected.
|
| 85 |
+
|
| 86 |
+
3.13 Keeping accurate records of circuit outages. The information recorded should be agreed with the circuit sub-control station and should include:
|
| 87 |
+
|
| 88 |
+
- the reference number mentioned in § 3.3;
|
| 89 |
+
- the circuit outage time;
|
| 90 |
+
- the location of the fault that is, in a national or international circuit section or in the renter's equipment;
|
| 91 |
+
- the general nature of the fault.
|
| 92 |
+
|
| 93 |
+
### **4 Appointment of control stations**
|
| 94 |
+
|
| 95 |
+
For each international leased or special circuit, a circuit control station is nominated by common agreement between the technical services of the Administrations concerned. For making the choice, special consideration will be given to the location of the principal user and the length of the circuit within the territory of each terminal country.
|
| 96 |
+
|
| 97 |
+
For unidirectional constituted circuits the circuit control station should be located in the receiving country.
|
| 98 |
+
|
| 99 |
+
The circuit control station may be located at or near the terminal repeater station serving the user or at the terminal international centre which defines the terminal of the international line in the control country.
|
| 100 |
+
|
| 101 |
+
The considerations involved in locating the circuit control station in a given country include the following:
|
| 102 |
+
|
| 103 |
+
- availability of staff;
|
| 104 |
+
- availability of adequate staff expertise;
|
| 105 |
+
- availability of communication with user and other pertinent locations;
|
| 106 |
+
- ability to fulfil the functions indicated in this Recommendation.
|
marked/M/T-REC-M.1013-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1014-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1015-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1015-198811-I_PDF-E/9e6062272bbe3ddbb7c0606721d64cf0_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1015-198811-I_PDF-E/d62e2e2281009c16f4ee61660e716cd9_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1015-198811-I_PDF-E/f9a14fbfecbd7d059226cc93677d721b_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1020-199303-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1020-199303-I_PDF-E/431b8889a0e7f676f0eef40859590349_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1020-199303-I_PDF-E/68aa26525c9346e4590a15c75d394e9d_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1020-199303-I_PDF-E/ac99eff233b8fe51d30f499e7413c345_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1025-199303-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1025-199303-I_PDF-E/4086a572c080354982c11f1de4d6921d_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1025-199303-I_PDF-E/55d2bfe1c3d04e86df8d7a104d802172_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1025-199303-I_PDF-E/925f55ce69802b9d3b00546382663ee2_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1030-198811-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,160 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
The logo of the International Telecommunication Union (ITU) features the letters 'ITU' in a bold, sans-serif font, superimposed on a stylized globe with intersecting lines.
|
| 6 |
+
|
| 7 |
+
ITU logo
|
| 8 |
+
|
| 9 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 10 |
+
|
| 11 |
+
**ITU-T**
|
| 12 |
+
|
| 13 |
+
**M.1030**
|
| 14 |
+
|
| 15 |
+
TELECOMMUNICATION
|
| 16 |
+
STANDARDIZATION SECTOR
|
| 17 |
+
OF ITU
|
| 18 |
+
|
| 19 |
+
**MAINTENANCE:**
|
| 20 |
+
|
| 21 |
+
**INTERNATIONAL LEASED CIRCUITS**
|
| 22 |
+
|
| 23 |
+
---
|
| 24 |
+
|
| 25 |
+
**CHARACTERISTICS OF ORDINARY
|
| 26 |
+
QUALITY INTERNATIONAL LEASED
|
| 27 |
+
CIRCUITS FORMING PART OF
|
| 28 |
+
PRIVATE SWITCHED TELEPHONE
|
| 29 |
+
NETWORKS**
|
| 30 |
+
|
| 31 |
+
**ITU-T Recommendation M.1030**
|
| 32 |
+
|
| 33 |
+
(Extract from the *Blue Book*)
|
| 34 |
+
|
| 35 |
+
---
|
| 36 |
+
|
| 37 |
+
# NOTES
|
| 38 |
+
|
| 39 |
+
1 ITU-T Recommendation M.1030 was published in Fascicle IV.2 of the *Blue Book*. This file is an extract from the *Blue Book*. While the presentation and layout of the text might be slightly different from the *Blue Book* version, the contents of the file are identical to the *Blue Book* version and copyright conditions remain unchanged (see below).
|
| 40 |
+
|
| 41 |
+
2 In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 42 |
+
|
| 43 |
+
# **CHARACTERISTICS OF ORDINARY QUALITY INTERNATIONAL LEASED CIRCUITS FORMING PART OF PRIVATE SWITCHED TELEPHONE NETWORKS**
|
| 44 |
+
|
| 45 |
+
## **1 General**
|
| 46 |
+
|
| 47 |
+
### **1.1 Scope**
|
| 48 |
+
|
| 49 |
+
This Recommendation details the characteristics of an international leased circuit intended to form part of a private switched telephone network. The requirements of this Recommendation are intended to ensure the provision of a circuit suitable for telephony purposes. Such circuits may be used either singly, and thus provide for speech communication between two private telephone exchanges in different countries, or as part of a connection within a private switched telephone network covering two or more countries.
|
| 50 |
+
|
| 51 |
+
It should be noted that not all Administrations provide circuits of the type covered by this Recommendation.
|
| 52 |
+
|
| 53 |
+
Recommendation G.171 [1] contains the transmission planning considerations upon which the characteristics given in § 2 below are based, and specifies the maximum number of circuits in tandem which the transmission plan permits<sup>1)</sup>.
|
| 54 |
+
|
| 55 |
+
### **1.2 Terminology**
|
| 56 |
+
|
| 57 |
+
#### **1.2.1 Circuit access points**
|
| 58 |
+
|
| 59 |
+
The term “circuit access points” is used in this Recommendation with the same meaning as that given in Recommendation M.565 [2]. The precise location of, and relative levels at, the circuit access points are determined by the involved Administrations in collaboration with the renter concerned.
|
| 60 |
+
|
| 61 |
+
#### **1.2.2 Four-wire circuits**
|
| 62 |
+
|
| 63 |
+
This term is intended to cover circuits which are switched on a 4-wire basis, are available via 4-wire circuit access points, and do not contain 2-wire circuit sections.
|
| 64 |
+
|
| 65 |
+
#### **1.2.3 Two-wire presented circuits**
|
| 66 |
+
|
| 67 |
+
This term is used to cover circuits which do not meet the criteria set out in § 1.2.2 above, for example, circuits between exchanges using 2-wire switching.
|
| 68 |
+
|
| 69 |
+
## **2 Characteristics**
|
| 70 |
+
|
| 71 |
+
### **2.1 Nominal overall loss**
|
| 72 |
+
|
| 73 |
+
It is not possible to specify the nominal overall loss between actual switching points, or between circuit access points, because of the freedom afforded Administrations in choosing the relative transmission level at these points.
|
| 74 |
+
|
| 75 |
+
In order to ensure satisfactory loss and stability performance on end-to-end connections within private switched networks, the overall loss of interconnecting international leased circuits may need to be the subject of bilateral discussion between the terminal Administrations. In this connection, see also § 3 below.
|
| 76 |
+
|
| 77 |
+
### **2.2 Loss/frequency distortion**
|
| 78 |
+
|
| 79 |
+
The limits for overall loss relative to that at 1020 Hz are given in Figure 1/M.1030 and Figure 2/M.1030 for 4-wire and 2-wire presented circuits respectively. It may be noted that the limits in Figure 2/M.1030 are the same as those appearing in Recommendation M.1040, § 2.2.
|
| 80 |
+
|
| 81 |
+
---
|
| 82 |
+
|
| 83 |
+
<sup>1)</sup> Recommendation G.171, § 1 [1] states that for connection between private telephone networks and the public network, when permitted, “assurance cannot always be given that transmission performance to CCITT standards will be obtained.” The same may be said for connections achieved by a user over which an Administration has no control, for example, between two or more private networks by virtue of user provided private automatic branch exchanges (PABXs).
|
| 84 |
+
|
| 85 |
+
Exceptionally, where a 2-wire private telephone exchange originates and terminates traffic in an otherwise 4-wire network, the 4-wire section of an international leased circuit terminated on that exchange should meet the requirements of Figure 1/M.1030.
|
| 86 |
+
|
| 87 |
+

|
| 88 |
+
|
| 89 |
+
Figure 1/M.1030: Limits for overall loss of the circuit relative to that at 1020 Hz for 4-wire circuits. The graph shows loss in dB on the y-axis (from -2 to 10) against frequency in Hz on the x-axis (from 0 to 3000). A reference point is marked at 1020 Hz, 0 dB. The loss is 0 dB from 300 Hz to 500 Hz, then drops to -3 dB at 500 Hz, and remains at -3 dB until 2000 Hz. At 2000 Hz, it rises to 6 dB and stays until 2800 Hz. Between 2800 Hz and 3000 Hz, it rises to 10 dB. Below 300 Hz and above 3000 Hz, the loss is not less than 0.0 dB.
|
| 90 |
+
|
| 91 |
+
*Note* – Below 300 Hz and above 3000 Hz the loss shall not be less than 0.0 dB but is otherwise unspecified. These frequencies should be confirmed or amended after further study.
|
| 92 |
+
|
| 93 |
+
FIGURE 1/M.1030
|
| 94 |
+
|
| 95 |
+
**Limits for overall loss of the circuit relative to that at 1020 Hz for 4-wire circuits**
|
| 96 |
+
|
| 97 |
+

|
| 98 |
+
|
| 99 |
+
Figure 2/M.1030: Limits for overall loss of the circuit relative to that at 1020 Hz for 2-wire presented circuits. The graph shows overall loss in dB on the y-axis (from -3 to 16) against frequency in Hz on the x-axis (from 0 to 3000). A reference point is marked at 1020 Hz, 0 dB. The loss is 0 dB from 300 Hz to 400 Hz, then rises to 9 dB at 400 Hz, and remains at 9 dB until 2000 Hz. At 2000 Hz, it rises to 16 dB and stays until 2800 Hz. Between 2800 Hz and 3000 Hz, it drops to -3 dB. Below 300 Hz and above 3000 Hz, the loss is not less than 0.0 dB.
|
| 100 |
+
|
| 101 |
+
*Note* – Below 300 Hz and above 3000 Hz the loss shall not be less than 0.0 dB, but is otherwise unspecified. These frequencies should be confirmed or amended after further study.
|
| 102 |
+
|
| 103 |
+
FIGURE 2/M.1030
|
| 104 |
+
|
| 105 |
+
**Limits for overall loss of the circuit relative to that at 1020 Hz for 2-wire presented circuits**
|
| 106 |
+
|
| 107 |
+
### 2.3 Variations of overall loss with time
|
| 108 |
+
|
| 109 |
+
For all circuits, variation with time of the overall loss at 1020 Hz (including daily and seasonal variations but excluding amplitude hits) should be as small as possible but should not exceed $\pm 4$ dB.
|
| 110 |
+
|
| 111 |
+
### 2.4 Random circuit noise
|
| 112 |
+
|
| 113 |
+
The nominal level of psophometric noise power depends upon the actual constitution of the circuit, in particular upon the length of circuit of frequency division multiplex systems involved. The provisional limit for circuits of lengths greater than 10 000 km is $-38$ dBm0p. However, circuits of shorter length will have substantially less random noise (see Annex A to this Recommendation and Recommendation M.1050, § 3.5).
|
| 114 |
+
|
| 115 |
+
### 2.5 Echo
|
| 116 |
+
|
| 117 |
+
The provisions of Recommendations G.122 [3] and G.131 [4] concerning echo control should be observed in so far as they are applicable.
|
| 118 |
+
|
| 119 |
+
## 3 Stability
|
| 120 |
+
|
| 121 |
+
National systems interfacing with the international leased circuits dealt with in this Recommendation should comply with the stability requirements of Recommendation G.122 [3].
|
| 122 |
+
|
| 123 |
+
Recognizing that national private switched networks (planned in accordance with national transmission standards) may ultimately be interconnected by international leased circuits, involved Administrations may need to discuss the actions necessary to ensure adequate stability of the resulting international private switched network.
|
| 124 |
+
|
| 125 |
+
## ANNEX A
|
| 126 |
+
|
| 127 |
+
(to Recommendation M.1030)
|
| 128 |
+
|
| 129 |
+
### Random circuit noise
|
| 130 |
+
|
| 131 |
+
Figure A-1/M.1030 displays random noise versus length of circuit of FDM carrier systems and is presented as a guide to the random noise performance which may be found on an international leased circuit.
|
| 132 |
+
|
| 133 |
+

|
| 134 |
+
|
| 135 |
+
The graph shows the relationship between random noise (in dBm0p) and the length of an FDM carrier system circuit (in km). The Y-axis is labeled 'Random noise' and ranges from -55 to -35 dBm0p. The X-axis is labeled 'Length of circuit of FDM carrier systems' and is on a logarithmic scale with values 200, 500, 1000, 2000, 5000, 10000, and 20000 km. A shaded diagonal band represents the noise performance, starting at approximately -51 dBm0p for 500 km and rising to approximately -38 dBm0p for 20,000 km. The text 'CCITT-37060 d03-sc' is visible in the bottom right corner of the graph area.
|
| 136 |
+
|
| 137 |
+
| Length of circuit of FDM carrier systems (km) | Random noise (dBm0p) |
|
| 138 |
+
|-----------------------------------------------|----------------------|
|
| 139 |
+
| 500 | -51 |
|
| 140 |
+
| 1000 | -48 |
|
| 141 |
+
| 2000 | -45 |
|
| 142 |
+
| 5000 | -41 |
|
| 143 |
+
| 10000 | -39 |
|
| 144 |
+
| 20000 | -38 |
|
| 145 |
+
|
| 146 |
+
Figure A-1/M.1030: Random circuit-noise performance graph. The Y-axis is 'Random noise' in dBm0p, ranging from -55 to -35. The X-axis is 'Length of circuit of FDM carrier systems' in km, on a logarithmic scale from 200 to 20,000. A shaded diagonal band shows the relationship between length and noise level.
|
| 147 |
+
|
| 148 |
+
FIGURE A-1/M.1030
|
| 149 |
+
**Random circuit-noise performance**
|
| 150 |
+
|
| 151 |
+
*Note* – At the present time the section of the circuit provided by satellite (between earth stations) employing FDM techniques contributes approximately 10 000 pW0p (–50 dBm0p) of noise. Therefore, for the purpose of determining maintenance limits for noise measurement on leased circuits, the length of the section provided by satellite may be considered to be equivalent to 1000 km in Figure A-1/M.1030.
|
| 152 |
+
|
| 153 |
+
The contribution to noise of a circuit section provided by satellite employing TDM techniques remains as a subject for further study.
|
| 154 |
+
|
| 155 |
+
## **References**
|
| 156 |
+
|
| 157 |
+
- [1] CCITT Recommendation *Transmission plan aspects of private operated networks*, Vol. III, Rec. G.171.
|
| 158 |
+
- [2] CCITT Recommendation *Access points for international telephone circuits*, Vol. IV, Rec. M.565.
|
| 159 |
+
- [3] CCITT Recommendation *Influence of national systems on stability, talker echo and listener echo in international connections*, Vol. III, Rec. G.122.
|
| 160 |
+
- [4] CCITT Recommendation *Stability and echo*, Vol. III, Rec. G.131.
|
marked/M/T-REC-M.1045-199605-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1050-199806-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,619 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
ITU logo: A globe with the letters ITU and a lightning bolt.
|
| 6 |
+
|
| 7 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 8 |
+
|
| 9 |
+
**ITU-T**
|
| 10 |
+
|
| 11 |
+
**M.1050**
|
| 12 |
+
|
| 13 |
+
TELECOMMUNICATION
|
| 14 |
+
STANDARDIZATION SECTOR
|
| 15 |
+
OF ITU
|
| 16 |
+
|
| 17 |
+
(06/98)
|
| 18 |
+
|
| 19 |
+
SERIES M: TMN AND NETWORK MAINTENANCE:
|
| 20 |
+
INTERNATIONAL TRANSMISSION SYSTEMS,
|
| 21 |
+
TELEPHONE CIRCUITS, TELEGRAPHY, FACSIMILE
|
| 22 |
+
AND LEASED CIRCUITS
|
| 23 |
+
|
| 24 |
+
International leased circuits
|
| 25 |
+
|
| 26 |
+
---
|
| 27 |
+
|
| 28 |
+
**Lining up an international point-to-point leased
|
| 29 |
+
circuit with analogue presentation to the user**
|
| 30 |
+
|
| 31 |
+
ITU-T Recommendation M.1050
|
| 32 |
+
|
| 33 |
+
(Previously CCITT Recommendation)
|
| 34 |
+
|
| 35 |
+
---
|
| 36 |
+
|
| 37 |
+
# ITU-T M-SERIES RECOMMENDATIONS
|
| 38 |
+
|
| 39 |
+
## **TMN AND NETWORK MAINTENANCE: INTERNATIONAL TRANSMISSION SYSTEMS, TELEPHONE CIRCUITS, TELEGRAPHY, FACSIMILE AND LEASED CIRCUITS**
|
| 40 |
+
|
| 41 |
+
| | |
|
| 42 |
+
|---------------------------------------------------------------------------------|----------------------|
|
| 43 |
+
| Introduction and general principles of maintenance and maintenance organization | M.10–M.299 |
|
| 44 |
+
| International transmission systems | M.300–M.559 |
|
| 45 |
+
| International telephone circuits | M.560–M.759 |
|
| 46 |
+
| Common channel signalling systems | M.760–M.799 |
|
| 47 |
+
| International telegraph systems and phototelegraph transmission | M.800–M.899 |
|
| 48 |
+
| International leased group and supergroup links | M.900–M.999 |
|
| 49 |
+
| <b>International leased circuits</b> | <b>M.1000–M.1099</b> |
|
| 50 |
+
| Mobile telecommunication systems and services | M.1100–M.1199 |
|
| 51 |
+
| International public telephone network | M.1200–M.1299 |
|
| 52 |
+
| International data transmission systems | M.1300–M.1399 |
|
| 53 |
+
| Designations and information exchange | M.1400–M.1999 |
|
| 54 |
+
| International transport network | M.2000–M.2999 |
|
| 55 |
+
| Telecommunications management network | M.3000–M.3599 |
|
| 56 |
+
| Integrated services digital networks | M.3600–M.3999 |
|
| 57 |
+
| Common channel signalling systems | M.4000–M.4999 |
|
| 58 |
+
|
| 59 |
+
*For further details, please refer to ITU-T List of Recommendations.*
|
| 60 |
+
|
| 61 |
+
## **ITU-T RECOMMENDATION M.1050**
|
| 62 |
+
|
| 63 |
+
# **LINING UP AN INTERNATIONAL POINT-TO-POINT LEASED CIRCUIT WITH ANALOGUE PRESENTATION TO THE USER**
|
| 64 |
+
|
| 65 |
+
## **Summary**
|
| 66 |
+
|
| 67 |
+
This Recommendation provides two methodologies to ensure effective lining up of an international leased circuit with analogue presentation to the user.
|
| 68 |
+
|
| 69 |
+
## **Source**
|
| 70 |
+
|
| 71 |
+
ITU-T Recommendation M.1050 was revised by ITU-T Study Group 4 (1997-2000) and was approved under the WTSC Resolution No. 1 procedure on the 26th of June 1998.
|
| 72 |
+
|
| 73 |
+
## **Keywords**
|
| 74 |
+
|
| 75 |
+
Analogue presentation, end-to-end line up, international leased circuit, section-by-section line up.
|
| 76 |
+
|
| 77 |
+
## FOREWORD
|
| 78 |
+
|
| 79 |
+
ITU (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of the ITU. The ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis.
|
| 80 |
+
|
| 81 |
+
The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendations on these topics.
|
| 82 |
+
|
| 83 |
+
The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1.
|
| 84 |
+
|
| 85 |
+
In some areas of information technology which fall within ITU-T's purview, the necessary standards are prepared on a collaborative basis with ISO and IEC.
|
| 86 |
+
|
| 87 |
+
### NOTE
|
| 88 |
+
|
| 89 |
+
In this Recommendation, the expression "Administration" is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 90 |
+
|
| 91 |
+
## INTELLECTUAL PROPERTY RIGHTS
|
| 92 |
+
|
| 93 |
+
The ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. The ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process.
|
| 94 |
+
|
| 95 |
+
As of the date of approval of this Recommendation, the ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database.
|
| 96 |
+
|
| 97 |
+
© ITU 1998
|
| 98 |
+
|
| 99 |
+
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU.
|
| 100 |
+
|
| 101 |
+
## CONTENTS
|
| 102 |
+
|
| 103 |
+
| | | <i>Page</i> |
|
| 104 |
+
|-------|-------------------------------------------------------------------------------|-------------|
|
| 105 |
+
| 1 | Scope ..... | 1 |
|
| 106 |
+
| 2 | References ..... | 1 |
|
| 107 |
+
| 3 | Terminology and definitions ..... | 2 |
|
| 108 |
+
| 4 | Abbreviations ..... | 2 |
|
| 109 |
+
| 5 | General ..... | 3 |
|
| 110 |
+
| 6 | Lining up the constituent parts of the circuit ..... | 3 |
|
| 111 |
+
| 6.1 | National sections ..... | 3 |
|
| 112 |
+
| 6.1.1 | Overall loss at reference frequency ..... | 3 |
|
| 113 |
+
| 6.1.2 | Loss/frequency distortion (special quality circuits only) ..... | 4 |
|
| 114 |
+
| 6.1.3 | Group-delay distortion (special quality circuits only) ..... | 4 |
|
| 115 |
+
| 6.2 | International section ..... | 4 |
|
| 116 |
+
| 6.2.1 | Overall loss at reference frequency ..... | 4 |
|
| 117 |
+
| 6.2.2 | Loss/frequency distortion ..... | 4 |
|
| 118 |
+
| 6.2.3 | Group-delay distortion (special quality circuits only) ..... | 4 |
|
| 119 |
+
| 6.3 | International link ..... | 4 |
|
| 120 |
+
| 7 | Lining up the overall circuit ..... | 4 |
|
| 121 |
+
| 7.1 | Overall loss ..... | 5 |
|
| 122 |
+
| 7.2 | Loss/frequency distortion ..... | 5 |
|
| 123 |
+
| 7.2.1 | Ordinary quality circuits ..... | 5 |
|
| 124 |
+
| 7.2.2 | Special quality circuits ..... | 5 |
|
| 125 |
+
| 7.3 | Group-delay distortion (special quality circuits only) ..... | 5 |
|
| 126 |
+
| 7.4 | Variation with time of the overall loss at 1020 Hz ..... | 6 |
|
| 127 |
+
| 7.4.1 | Amplitude hits (special quality circuits only) ..... | 6 |
|
| 128 |
+
| 7.4.2 | Other variations ..... | 6 |
|
| 129 |
+
| 7.5 | Random circuit noise ..... | 6 |
|
| 130 |
+
| 7.6 | Impulsive noise (special quality circuits only) ..... | 6 |
|
| 131 |
+
| 7.7 | Phase jitter (special quality circuits only) ..... | 6 |
|
| 132 |
+
| 7.8 | Total distortion (special quality circuits only) ..... | 6 |
|
| 133 |
+
| 7.9 | Single tone interference (special quality circuits only) ..... | 7 |
|
| 134 |
+
| 7.10 | Frequency error (special quality circuits only) ..... | 7 |
|
| 135 |
+
| 7.11 | Harmonic and intermodulation distortion (special quality circuits only) ..... | 7 |
|
| 136 |
+
| 7.12 | Crosstalk (special quality circuits only) ..... | 7 |
|
| 137 |
+
| 7.13 | Power source interferences (special quality circuits only) ..... | 7 |
|
| 138 |
+
| 8 | Section-by-section line-up ..... | 7 |
|
| 139 |
+
| 8.1 | Lining up the analogue-type section ..... | 8 |
|
| 140 |
+
| 8.1.1 | National sections ..... | 8 |
|
| 141 |
+
| 8.1.2 | International section ..... | 10 |
|
| 142 |
+
| 8.2 | Lining up the digital-type section ..... | 10 |
|
| 143 |
+
| 8.2.1 | National sections ..... | 10 |
|
| 144 |
+
| 8.2.2 | International section ..... | 11 |
|
| 145 |
+
|
| 146 |
+
| | | |
|
| 147 |
+
|-------|------------------------------------------------------------------------------------|----|
|
| 148 |
+
| 8.3 | Overall circuit ..... | 11 |
|
| 149 |
+
| 8.3.1 | Configuration and testing of digital-type sections bounded by A/D converters ..... | 11 |
|
| 150 |
+
| 8.3.2 | Overall lineup ..... | 11 |
|
| 151 |
+
| 9 | Additional reference measurements..... | 11 |
|
| 152 |
+
| 10 | Functional checks ..... | 11 |
|
| 153 |
+
| 11 | Transmission level checks ..... | 12 |
|
| 154 |
+
| 12 | Level limiters..... | 12 |
|
| 155 |
+
| 13 | Marking of equipment associated with special quality circuits ..... | 12 |
|
| 156 |
+
| 14 | Short-time rerouting of special quality leased circuits ..... | 12 |
|
| 157 |
+
|
| 158 |
+
# LINING UP AN INTERNATIONAL POINT-TO-POINT LEASED CIRCUIT WITH ANALOGUE PRESENTATION TO THE USER
|
| 159 |
+
|
| 160 |
+
*[Published as M.89 in 1964; revised and renumbered as M.102 in 1968;
|
| 161 |
+
new as M.111 and M.113 in 1968; revised in 1972; combined with M.102 (part),
|
| 162 |
+
M.111 (part) and M.113 and revised in 1976; renumbered M.1050 in 1980;
|
| 163 |
+
revised in 1984, 1988, 1993 and 1998]*
|
| 164 |
+
|
| 165 |
+
## 1 Scope
|
| 166 |
+
|
| 167 |
+
This Recommendation deals with the lining-up of both ordinary quality point-to-point leased circuits (the characteristics of which are specified in Recommendation M.1040 [15]), and special quality point-to-point leased circuits (the characteristics of which are specified in Recommendations M.1020 [12] and M.1025 [13]), which are provided by analogue transmission systems or by a mixture of analogue and digital systems.
|
| 168 |
+
|
| 169 |
+
## 2 References
|
| 170 |
+
|
| 171 |
+
The following ITU-T Recommendations contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations are subject to revision; all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendation listed below. A list of the currently valid ITU-T Recommendations is regularly published.
|
| 172 |
+
|
| 173 |
+
- [1] ITU-T Recommendation G.101 (1996), *The transmission plan*.
|
| 174 |
+
- [2] ITU-T Recommendation G.122 (1993), *Influence of national systems on stability and talker echo in international connections*.
|
| 175 |
+
- [3] ITU-T Recommendation G.131 (1996), *Control of talker echo*.
|
| 176 |
+
- [4] CCITT Recommendation G.134 (1988), *Linear crosstalk*.
|
| 177 |
+
- [5] CCITT Recommendation G.151 (1980), *General performance objectives applicable to all modern international circuits and national extension circuits*.
|
| 178 |
+
- [6] CCITT Recommendation G.224 (1984), *Maximum permissible value for the absolute power level (power referred to one milliwatt) of a signalling pulse*.
|
| 179 |
+
- [7] CCITT Recommendation G.232 (1984), *12-channel terminal equipments*.
|
| 180 |
+
- [8] CCITT Recommendation H.13 (1988), *Impulsive-noise measuring instrument for telephone-type circuits*.
|
| 181 |
+
- [9] ITU-T Recommendation M.60 (1993), *Maintenance terminology and definitions*.
|
| 182 |
+
- [10] CCITT Recommendation M.580 (1988), *Setting up and lining up an international circuit for public telephony*.
|
| 183 |
+
- [11] CCITT Recommendation M.1010 (1988), *Constitution and nomenclature of international leased circuits*.
|
| 184 |
+
- [12] ITU-T Recommendation M.1020 (1993), *Characteristics of special quality international leased circuits with special bandwidth conditioning*.
|
| 185 |
+
- [13] ITU-T Recommendation M.1025 (1993), *Characteristics of special quality international leased circuits with basic bandwidth conditioning*.
|
| 186 |
+
- [14] CCITT Recommendation M.1030 (1988), *Characteristics of ordinary quality international leased circuits forming part of private switched telephone networks*.
|
| 187 |
+
|
| 188 |
+
- [15] CCITT Recommendation M.1040 (1988), *Characteristics of ordinary quality international leased circuits.*
|
| 189 |
+
- [16] CCITT Recommendation M.1060 (1988), *Maintenance of international leased circuits.*
|
| 190 |
+
- [17] ITU-T Recommendation M.1340 (1996), *Performance allocations and limits for international data transmission links and systems.*
|
| 191 |
+
- [18] ITU-T Recommendation M.1370 (1993), *Bringing-into-service of international data transmission systems.*
|
| 192 |
+
- [19] ITU-T Recommendation M.2100 (1995), *Performance limits for bringing-into-service and maintenance of international PDH path, sections and transmission systems.*
|
| 193 |
+
- [20] ITU-T Recommendation O.41 (1994), *Psophometer for use on telephone-type circuits.*
|
| 194 |
+
- [21] CCITT Recommendation O.71 (1988), *Impulsive noise measuring equipment for telephone-type circuits.*
|
| 195 |
+
- [22] CCITT Recommendation O.81 (1972), *Group-delay measuring equipment for telephone-type circuits.*
|
| 196 |
+
- [23] CCITT Recommendation O.91 (1988), *Phase jitter measurement equipment for telephone-type circuits.*
|
| 197 |
+
- [24] CCITT Recommendation O.95 (1980), *Phase and amplitude hits counters for telephone-type circuits.*
|
| 198 |
+
- [25] CCITT Recommendation O.111 (1988), *Frequency shift measuring equipment for use on carrier channels.*
|
| 199 |
+
- [26] CCITT Recommendation O.132 (1988), *Quantizing distortion measuring equipment using a sinusoidal test signal.*
|
| 200 |
+
- [27] CCITT Recommendation M.810 (1988), *Setting up and lining up of an international voice-frequency telegraph link for public telegraph circuits (for 50, 100 and 200 baud modulation rates).*
|
| 201 |
+
- [28] CCITT Recommendation V.2 (1988), *Power levels for data transmission over telephone lines.*
|
| 202 |
+
- [29] CCITT Recommendation V.55 (1988), *Impulsive noise measuring instrument for telephone-type circuits.*
|
| 203 |
+
- [30] CCITT Recommendation O.42 (1984), *Equipment to measure non-linear distortion using the 4-tone intermodulation method.*
|
| 204 |
+
|
| 205 |
+
## 3 Terminology and definitions
|
| 206 |
+
|
| 207 |
+
Terminologies and definitions relating to this Recommendation are provided in Recommendation M.60 [9].
|
| 208 |
+
|
| 209 |
+
## 4 Abbreviations
|
| 210 |
+
|
| 211 |
+
This Recommendation uses the following abbreviations.
|
| 212 |
+
|
| 213 |
+
| | |
|
| 214 |
+
|-----|---------------------------------|
|
| 215 |
+
| A/D | Analogue/Digital |
|
| 216 |
+
| ES | Errored Second |
|
| 217 |
+
| FDM | Frequency Division Multiplexing |
|
| 218 |
+
| PCM | Pulse Code Modulation |
|
| 219 |
+
| RP | Renter's Premises |
|
| 220 |
+
| SES | Severely Errored Second |
|
| 221 |
+
| TIC | Terminal International Centre |
|
| 222 |
+
| TNC | Terminal National Centre |
|
| 223 |
+
|
| 224 |
+
## 5 General
|
| 225 |
+
|
| 226 |
+
Figure 1 shows the constituent parts of an international point-to-point leased circuit.
|
| 227 |
+
|
| 228 |
+

|
| 229 |
+
|
| 230 |
+
The diagram illustrates the components of an international leased circuit. It shows a sequence of nodes: RP (Renter's premises), TNC (Terminal national centre), TIC (Terminal international centre), TIC, TNC, and RP. The circuit is divided into three main sections: a 'National section' between the first RP and TNC, an 'International section (International line)' between the two TICs, and another 'National section' between the second TNC and the second RP. Below these, an 'International link' is shown between the two TICs, and the entire 'International leased circuit' is indicated between the two RPs. A reference code 'T0405040-94/d01' is present in the bottom right. A legend at the bottom left defines the abbreviations: RP for Renter's premises, TNC for Terminal national centre, and TIC for Terminal international centre.
|
| 231 |
+
|
| 232 |
+
Diagram of an international point-to-point leased circuit showing its constituent parts: Renter's premises (RP), Terminal national centre (TNC), and Terminal international centre (TIC).
|
| 233 |
+
|
| 234 |
+
**Figure 1/M.1050 – The constituent parts of an international point-to-point leased circuit**
|
| 235 |
+
|
| 236 |
+
Test signals transmitted over the international section and link should be applied at a level of $-10$ dBm0.
|
| 237 |
+
|
| 238 |
+
The method of line-up described in clauses 6 and 7 below requires that appropriate personnel be present at the renter's premises in the two terminal countries to carry out overall, end-to-end tests of the characteristics of international leased circuits. The cooperation of staff at the terminal international centres may also be required to overcome language or technical difficulties.
|
| 239 |
+
|
| 240 |
+
Recognizing that differing national practices may mean that the required degree of international coordination is difficult to achieve, and acknowledging that it may not be possible to arrange simultaneous attendance at the two renter's premises because of time zone differences or restricted access to those premises, clause 8 below describes a method of circuit line-up using a section-by-section approach.
|
| 241 |
+
|
| 242 |
+
It should be noted that the end-to-end line-up approach (see clauses 6 and 7) and the section-by-section approach (see clause 8) are not compatible. Thus, Network Operators/Service Providers must agree, on a bilateral basis, which approach they will adopt.
|
| 243 |
+
|
| 244 |
+
When a section is entirely routed over a digital transmission system, the section-by-section approach is preferred.
|
| 245 |
+
|
| 246 |
+
## 6 Lining up the constituent parts of the circuit
|
| 247 |
+
|
| 248 |
+
After the circuit has been set up, the following lining-up procedure should be followed in each direction of transmission.
|
| 249 |
+
|
| 250 |
+
### 6.1 National sections
|
| 251 |
+
|
| 252 |
+
When analogue access to the circuit is available at the terminal international centre, the following tests should be performed regardless of whether the national section is provided by analogue circuit sections or a combination of analogue, mixed and digital circuit sections.
|
| 253 |
+
|
| 254 |
+
#### 6.1.1 Overall loss at reference frequency
|
| 255 |
+
|
| 256 |
+
Each national section should be lined up at the reference frequency according to national practices between the terminal national centre and international centre. Note should be taken of the requirement concerning the receiving relative level in 2.1/M.1020 [12], 2.1/M.1025 [13] and 2.1/M.1040 [15]. For international leased circuits forming part of a private switched network, the loss of the national section must be consistent with meeting the required overall loss of the circuit as agreed between Network Operators/Service Providers (refer to 2.1/M.1030 and to clause 3/M.1030 [14]). A record should be kept of the levels received (including any measurements made at intermediate national test points). National sections beyond the terminal national centre must also be lined up.
|
| 257 |
+
|
| 258 |
+
#### **6.1.2 Loss/frequency distortion (special quality circuits only)**
|
| 259 |
+
|
| 260 |
+
The loss/frequency distortion should be measured at several frequencies. The limits of Table 1/M.580 [10] (column headed "between circuit access points") have to be met, if necessary, by means of an equalizer.
|
| 261 |
+
|
| 262 |
+
#### **6.1.3 Group-delay distortion (special quality circuits only)**
|
| 263 |
+
|
| 264 |
+
For circuits in conformity with Recommendation M.1020 [12], the limits to be applied are those given in Figure 2/M.1020 [12]. In the case of circuits in conformity with Recommendation M.1025 [13], the group-delay distortion should be measured and recorded for subsequent maintenance purposes. Any obvious abnormal condition shall be cleared.
|
| 265 |
+
|
| 266 |
+
### **6.2 International section**
|
| 267 |
+
|
| 268 |
+
When analogue access to the circuit is available at the terminal international centres, the following tests should be performed regardless of whether the international section is provided by analogue circuit sections or a combination of analogue, mixed and digital circuit sections.
|
| 269 |
+
|
| 270 |
+
#### **6.2.1 Overall loss at reference frequency**
|
| 271 |
+
|
| 272 |
+
The sections comprising the international line (see Figure 2/M.1010 [11]) should be lined up so that when, at the sending terminal international centre, a test signal at a level of $-10 \text{ dBm}0$ is connected to the input of the international line, the level received at the other terminal international centre is as close as possible to $-10 \text{ dBm}0$ . The level at intermediate test points should also be as close as possible to $-10 \text{ dBm}0$ .
|
| 273 |
+
|
| 274 |
+
#### **6.2.2 Loss/frequency distortion**
|
| 275 |
+
|
| 276 |
+
The loss/frequency distortion should be measured at several frequencies. The appropriate limits of Tables 1/M.580, 2/M.580 and 3/M.580 [10] (column headed "between circuit access points") have to be met, if necessary, by means of an equalizer.
|
| 277 |
+
|
| 278 |
+
#### **6.2.3 Group-delay distortion (special quality circuits only)**
|
| 279 |
+
|
| 280 |
+
For circuits in conformity with Recommendation M.1020 [12], the limits to be applied are those given in Figure 2/M.1020 [12]. In the case of circuits in conformity with Recommendation M.1025 [13], the group-delay distortion should be measured and recorded for subsequent maintenance purposes. Any obvious abnormal condition shall be cleared.
|
| 281 |
+
|
| 282 |
+
### **6.3 International link**
|
| 283 |
+
|
| 284 |
+
If it is possible, after the national and international sections have been lined up and connected together at the terminal international centres, measurements should be made of the international link between terminal national centres. These measurements should be of overall loss at reference frequency and loss/frequency distortion and should be recorded for subsequent maintenance purposes.
|
| 285 |
+
|
| 286 |
+
## **7 Lining up the overall circuit**
|
| 287 |
+
|
| 288 |
+
The constituent parts of the circuit having been satisfactorily lined up, the line-up of the overall circuit between renter's premises should now be made.
|
| 289 |
+
|
| 290 |
+
Where loop facilities exist, these may be used to obtain reference measurements, for subsequent maintenance. Care must be taken to avoid simultaneous operation of loop facilities should they exist at both terminals.
|
| 291 |
+
|
| 292 |
+
### 7.1 Overall loss
|
| 293 |
+
|
| 294 |
+
The loss at 1020 Hz should be measured and recorded. Note should be taken of 2.1/M.1020 [12], 2.1/M.1025 [13] and 2.1/M.1040 [15]. For international leased circuits forming part of a private switched network, the overall loss of the circuit should be adjusted to the value agreed between Network Operators/Service Providers (see 2.1/M.1030 [14] and clause 3/M.1030 [14]).
|
| 295 |
+
|
| 296 |
+
If 2-wire operation is intended, the curve in Recommendation G.131 [3] may be used to determine if an echo suppressor/canceller is necessary. Where appropriate, the stability of the circuit should be checked against the requirements of Recommendation G.122 [2]. Inasmuch as the same sort of plant is used for leased circuits as is used to provide the "national system" of Recommendation G.101 [1], this should ordinarily present no problem. References to virtual switching points (*extrémités virtuelles* in French) in the G series Recommendations should be interpreted as "points in the two directions of transmission on the international line at equal relative level".
|
| 297 |
+
|
| 298 |
+
### 7.2 Loss/frequency distortion
|
| 299 |
+
|
| 300 |
+
#### 7.2.1 Ordinary quality circuits
|
| 301 |
+
|
| 302 |
+
The loss/frequency distortion should meet the limits of 2.2/M.1030 [14] or of 2.2/M.1040 [15] as appropriate. Equalization should not normally be required to meet these limits.
|
| 303 |
+
|
| 304 |
+
#### 7.2.2 Special quality circuits
|
| 305 |
+
|
| 306 |
+
The loss/frequency distortion should be measured at several frequencies and recorded. To meet the limits given in Figure 1/M.1020 [12] or in clause 1/M.1025 [13], as appropriate, *mop-up* equalization may be necessary (see Notes 1 and 2).
|
| 307 |
+
|
| 308 |
+
### 7.3 Group-delay distortion (special quality circuits only)
|
| 309 |
+
|
| 310 |
+
The group-delay distortion should be measured using a measuring set in accordance with Recommendation O.81 [22].
|
| 311 |
+
|
| 312 |
+
**7.3.1** In the case of circuits to Recommendation M.1020 [12], the limits to be met are given in Figure 2/M.1020 [12]. The maximum unequalized group-delay distortion to be expected at the receiving end is three times that of Figure 2/M.1020 [12] (see Notes 1 and 2).
|
| 313 |
+
|
| 314 |
+
**7.3.2** In the case of circuits to Recommendation M.1025 [13], the limits to be met are given in Figure 2/M.1025 [13] (see Notes 1 and 3).
|
| 315 |
+
|
| 316 |
+
**Notes concerning 7.2.2 and 7.3** (Equalization of loss/frequency distortion and group-delay distortion on special quality leased circuits):
|
| 317 |
+
|
| 318 |
+
NOTE 1 – The precise location of any necessary equalizers is left to Network Operators/Service Providers to decide according to national practices. Equalizers built into the modems are not part of the international leased circuit as it is defined in Recommendation M.1010 [11].
|
| 319 |
+
|
| 320 |
+
The Network Operator/Service Provider at the receiving end of the circuit is responsible for seeing that the circuit meets the overall distortion limits in the receiving transmission direction.
|
| 321 |
+
|
| 322 |
+
Routing restrictions may be necessary to achieve the loss/frequency and group-delay distortion limits specified. Factors that may contribute to difficulties in meeting these limits are the number of through-group filters in group links, the number of channel translating equipments, the use of edge channels, heavily loaded cable, etc.
|
| 323 |
+
|
| 324 |
+
NOTE 2 – Equal distortion limits have been allocated to the national circuit section at the transmitting end, the international line and the national circuit section at the receiving end.
|
| 325 |
+
|
| 326 |
+
Individual cases of section limits being slightly exceeded can be accepted if the other sections do not attain their limits, so that the admissible overall unequalized distortion of three times the section limits at the receiving end is met.
|
| 327 |
+
|
| 328 |
+
NOTE 3 – Any necessary equalization to bring the overall group-delay distortion within the specified limits should be carried out at one location only for each direction of transmission.
|
| 329 |
+
|
| 330 |
+
### 7.4 Variation with time of the overall loss at 1020 Hz
|
| 331 |
+
|
| 332 |
+
#### 7.4.1 Amplitude hits (special quality circuits only)
|
| 333 |
+
|
| 334 |
+
Amplitude hits should be measured with an instrument complying to Recommendation O.95 [24] and recorded. The limits specified in Recommendations M.1020 [12] and M.1025 [13], as appropriate, should not be exceeded.
|
| 335 |
+
|
| 336 |
+
#### 7.4.2 Other variations
|
| 337 |
+
|
| 338 |
+
The variation of overall loss at 1020 Hz should be measured over a period of a few hours to check that the limits specified in Recommendations M.1020 [12], M.1025 [13] and M.1030 [14] are not exceeded. If the results are not satisfactory, the check should be continued to allow the trouble to be investigated and cleared.
|
| 339 |
+
|
| 340 |
+
### 7.5 Random circuit noise
|
| 341 |
+
|
| 342 |
+
Random circuit noise may be measured with a psophometer complying with Recommendation O.41 [20].
|
| 343 |
+
|
| 344 |
+
With the circuit correctly terminated, the psophometric noise power at the end of the circuit should be measured and recorded. The measured noise power should meet the requirements of Recommendations M.1020 [12], M.1025 [13], M.1030 [14] or M.1040 [15], as appropriate<sup>1</sup>. Where the measured noise is higher by 5 dB or more than the appropriate value in these Recommendations or is higher than -38 dBm0p, whichever is the more stringent requirement, a fault should be suspected and action taken to locate and remedy it where possible. It may be useful to compare noise measurements on circuits of identical or similar constitution to help locate a possible fault.
|
| 345 |
+
|
| 346 |
+
### 7.6 Impulsive noise (special quality circuits only)
|
| 347 |
+
|
| 348 |
+
Impulsive noise should be measured with an instrument complying with Recommendation O.71 [21] and recorded. It should meet the limits given in Recommendation M.1020 [12] or in Recommendation M.1025 [13] as appropriate.
|
| 349 |
+
|
| 350 |
+
A method of measurement is described in Recommendations H.13 [8] and V.55 [29].
|
| 351 |
+
|
| 352 |
+
It should be noted that satisfactory impulsive noise performance on a circuit is likely to be achieved if the circuit is routed via a 64 kbit/s digital path complying with Recommendation M.2100 [19].
|
| 353 |
+
|
| 354 |
+
### 7.7 Phase jitter (special quality circuits only)
|
| 355 |
+
|
| 356 |
+
Phase jitter should be measured using an instrument complying with Recommendation O.91 [23] and recorded.
|
| 357 |
+
|
| 358 |
+
The limits given in Recommendation M.1020 [12] or in Recommendation M.1025 [13], as appropriate, should not be exceeded, and routing restrictions (for example, minimizing the number of modulating equipments) may be necessary to achieve the objective limit.
|
| 359 |
+
|
| 360 |
+
### 7.8 Total distortion (special quality circuits only)
|
| 361 |
+
|
| 362 |
+
When the circuit includes any digital circuit sections, a measurement of total distortion should be made using an instrument complying with Recommendation O.132 [26]. Such a measurement will include contributions from quantizing distortion, random noise, harmonic distortion and single tone interference. The minimum signal-to-total distortion ratio is given in Recommendations M.1020 [12] and M.1025 [13]. However, if this minimum ratio is satisfied, it should not be assumed that all the parameters which contribute to the measurement are satisfactory. The total distortion measurement is not a substitute for the individual measurements specified in this Recommendation.
|
| 363 |
+
|
| 364 |
+
---
|
| 365 |
+
|
| 366 |
+
<sup>1</sup> Recommendation O.41 [20] specifies a flat filter of 3.1 kHz bandwidth for unweighted noise measurements on data circuits. If this filter is used, the noise values given in Recommendations M.1020 [12] to M.1060 [16] do not apply because they are based on the use of psophometric weighting. Therefore, further study is required to determine the appropriate values for unweighted circumstances.
|
| 367 |
+
|
| 368 |
+
### **7.9 Single tone interference (special quality circuits only)**
|
| 369 |
+
|
| 370 |
+
The method of measurement is under study.
|
| 371 |
+
|
| 372 |
+
### **7.10 Frequency error (special quality circuits only)**
|
| 373 |
+
|
| 374 |
+
The frequency error introduced by the circuit should be measured and recorded. A method of measurement is given in Recommendation O.111 [25].
|
| 375 |
+
|
| 376 |
+
The limits specified in Recommendation M.1020 [12] or in Recommendation M.1025 [13], as appropriate, should be met.
|
| 377 |
+
|
| 378 |
+
### **7.11 Harmonic and intermodulation distortion (special quality circuits only)**
|
| 379 |
+
|
| 380 |
+
Harmonic distortion should be measured by injecting a 700 Hz test frequency of $-13\text{ dBm}0$ at the transmit end of the circuit. The level of any individual harmonic at the receiving end should not exceed the limit given in Recommendation M.1020 [12] or in Recommendation M.1025 [13] as appropriate.
|
| 381 |
+
|
| 382 |
+
Alternatively, by bilateral agreement between Network Operators/Service Providers, a measurement of second and third order intermodulation products using an instrument complying with Recommendation O.42 [30] should be performed. The limits are for further study.
|
| 383 |
+
|
| 384 |
+
The results should be recorded.
|
| 385 |
+
|
| 386 |
+
### **7.12 Crosstalk (special quality circuits only)**
|
| 387 |
+
|
| 388 |
+
Crosstalk attenuation between different circuits and between the forward and reverse direction of the same circuit should meet the characteristics given in Recommendations M.1020 [12] and M.1025 [13]. Measuring techniques for the measurement of this parameter are described in Recommendations G.134 [4] and G.232 [7]. The bandwidth of the measuring equipment should not exceed 10 Hz.
|
| 389 |
+
|
| 390 |
+
### **7.13 Power source interferences (special quality circuits only)**
|
| 391 |
+
|
| 392 |
+
Admissible values of power source interferences are given in Recommendations M.1020 [12] and M.1025 [13].
|
| 393 |
+
|
| 394 |
+
A test reference frequency of 1020 Hz at a level of 0 dBm0 has to be used for the measurement of this parameter. Levels of unwanted side components should be measured at frequencies up to $\pm 400\text{ Hz}$ (see Recommendation G.151 [5]) from the test reference frequency.
|
| 395 |
+
|
| 396 |
+
## **8 Section-by-section line-up**
|
| 397 |
+
|
| 398 |
+
The section-by-section approach to the line-up of international leased circuits has been devised to minimize the need for international coordination and to overcome those situations where end-to-end line-up is not practical or possible.
|
| 399 |
+
|
| 400 |
+
Sections are defined in Figure 1.
|
| 401 |
+
|
| 402 |
+
Two section types will be considered depending on the transmission bearer:
|
| 403 |
+
|
| 404 |
+
- analogue-type section where the section is routed over an analogue transmission system or a mixture of analogue and digital systems but, in any case, an analogue access to the circuit is available at the TIC;
|
| 405 |
+
- digital-type section where the section is entirely routed over a digital transmission system. It is assumed that a digital access to the circuit at the nominal bit rate is available at both ends of the section.
|
| 406 |
+
|
| 407 |
+
A national section where the terminal section is routed over an analogue transmission system and the sub-section bounded by TNC and TIC (national line, see Figure 2/M.1010 [11]) is fully digitized should be categorized as an analogue-type section referring to the definition above. However, this classification may cause some difficulties in lining-up operations. In this case, the national section should be split into two sub-sections lined up independently. The terminal section shall be lined up according to analogue-type section specifications and the national line shall be lined up according to digital-type section specifications. Allocating national section loss/frequency and group-delay distortion limits to the terminal section should not cause any problem as digital systems do not normally impair these parameters.
|
| 408 |
+
|
| 409 |
+
### 8.1 Lining up the analogue-type section
|
| 410 |
+
|
| 411 |
+
Loss/frequency and group-delay distortion limits are apportioned to the international and national sections as follows (see Figure 2):
|
| 412 |
+
|
| 413 |
+
- International section: one third;
|
| 414 |
+
- National sections: one third.
|
| 415 |
+
|
| 416 |
+
The resulting limits for the international and national sections are given in Tables 1 and 2 for loss/frequency and group-delay, respectively.
|
| 417 |
+
|
| 418 |
+

|
| 419 |
+
|
| 420 |
+
The diagram shows a horizontal line representing a leased circuit path. At the far left and far right are dashed rectangular boxes labeled 'Renter's premises'. Inside each box is a triangle symbol representing 'Renter's equipment'. A solid line with a circle (the 'Measuring point') connects the equipment inside the premises to the rest of the circuit. The circuit then enters a 'National section' (indicated by a double-headed arrow above the line). It reaches a 'Terminal international centre' (marked by a circle on the line). The next segment is an 'International section' (also indicated by a double-headed arrow above). It reaches another 'Terminal international centre' (marked by a circle). The final segment is another 'National section' leading to the second 'Renter's premises'. Below the line, three double-headed arrows indicate the apportionment of distortion limits: the first 'National section' is labeled '1/3 (one third)', the 'International section' is labeled '1/3 (one third)', and the final 'National section' is labeled '1/3 (one third)'. A small text code 'T0405050-94/d02' is in the bottom right corner. A legend at the bottom left shows a dashed box with a triangle labeled 'Renter's equipment' and a solid line with a circle labeled 'Measuring point'.
|
| 421 |
+
|
| 422 |
+
Diagram illustrating the apportionment of overall distortion limits to national and international sections of international leased circuits. The diagram shows a circuit path from Renter's premises on the left, through a Terminal international centre, an International section, another Terminal international centre, and finally to Renter's premises on the right. The path is divided into three segments, each labeled '1/3 (one third)'. The first segment is a National section, the second is an International section, and the third is a National section. A legend at the bottom left shows a dashed box with a triangle labeled 'Renter's equipment' and a solid line with a circle labeled 'Measuring point'.
|
| 423 |
+
|
| 424 |
+
**Figure 2/M.1050 – Apportionment of overall distortion limits to national and international sections of international leased circuits**
|
| 425 |
+
|
| 426 |
+
#### 8.1.1 National sections
|
| 427 |
+
|
| 428 |
+
The following tests should be performed regardless of whether the national section is provided by analogue circuit sections or by a combination of analogue, mixed and digital circuit sections.
|
| 429 |
+
|
| 430 |
+
##### 8.1.1.1 Overall loss
|
| 431 |
+
|
| 432 |
+
Each national section should be lined up at the reference frequency according to national practices between the terminal national centre and international centre. Note should be taken of the requirement concerning the receiving relative level in 2.1/M.1020 [12], 2.1/M.1025 [13] and 2.1/M.1040 [15]. For circuits forming part of a private switched network, the loss of the national section must be consistent with meeting the required overall loss as agreed between Network Operators/Service Providers (see 2.1/M.1030 [14] and clause 3/M.1030 [14]). A record should be kept of the levels received (including any measurements made at intermediate national test points). National sections beyond the terminal national centre must also be lined up.
|
| 433 |
+
|
| 434 |
+
**Table 1/M.1050 – Apportionment of loss/frequency distortion limits**
|
| 435 |
+
|
| 436 |
+
| Frequency range | Overall loss relative to that at 1020 Hz (dB) | | | | | |
|
| 437 |
+
|-----------------|---------------------------------------------------------|--------------|--------------|---------------------------------------------------|--------------|--------------|
|
| 438 |
+
| | National sections<br>(as per Recommendations) | | | International section<br>(as per Recommendations) | | |
|
| 439 |
+
| | M.1020 | M.1025 | M.1040 | M.1020 | M.1025 | M.1040 |
|
| 440 |
+
| Below 300 Hz | Loss shall not be less than 0 dB, otherwise unspecified | | | | | |
|
| 441 |
+
| 300-400 Hz | – | – | Ø to –1.0 | – | – | Ø to –1.0 |
|
| 442 |
+
| 300-500 Hz | +2.0 to –0.7 | +4.0 to –0.7 | – | +2.0 to –0.7 | +4.0 to –0.7 | – |
|
| 443 |
+
| 400-2000 Hz | – | – | +3.0 to –1.0 | – | – | +3.0 to –1.0 |
|
| 444 |
+
| 500-2500 Hz | – | +2.7 to –0.7 | – | – | +2.7 to –0.7 | – |
|
| 445 |
+
| 500-2800 Hz | +1.0 to –0.3 | – | – | +1.0 to –0.3 | – | – |
|
| 446 |
+
| 2000-2800 Hz | – | – | +5.3 to –1.0 | – | – | +5.3 to –1.0 |
|
| 447 |
+
| 2500-3000 Hz | – | +4.0 to –0.7 | – | – | +4.0 to –0.7 | – |
|
| 448 |
+
| 2800-3000 Hz | +2.0 to –0.7 | – | Ø to –1.0 | +2.0 to –0.7 | – | Ø to –1.0 |
|
| 449 |
+
| Above 3000 Hz | Loss shall not be less than 0 dB, otherwise unspecified | | | | | |
|
| 450 |
+
| Ø Unspecified | | | | | | |
|
| 451 |
+
|
| 452 |
+
**Tableau 2/M.1050 – Apportionment of group-delay distortion limits**
|
| 453 |
+
|
| 454 |
+
| Frequency range | Limits for group delay relative to the minimum measured group delay in the 500-2800 Hz (ms) | | | |
|
| 455 |
+
|-----------------|---------------------------------------------------------------------------------------------|-------------|---------------------------------------------------|-------------|
|
| 456 |
+
| | National sections<br>(as per Recommendations) | | International section<br>(as per Recommendations) | |
|
| 457 |
+
| | M.1020 | M.1025 | M.1020 | M.1025 |
|
| 458 |
+
| Below 500 Hz | Unspecified | – | Unspecified | – |
|
| 459 |
+
| Below 600 Hz | – | Unspecified | – | Unspecified |
|
| 460 |
+
| 500-600 Hz | 1.0 | – | 1.0 | – |
|
| 461 |
+
| 600-1000 Hz | 0.5 | 1.0 | 0.5 | 1.0 |
|
| 462 |
+
| 1000-2600 Hz | 0.17 | 0.5 | 0.17 | 0.5 |
|
| 463 |
+
| 2600-2800 Hz | 1.0 | 1.0 | 1.0 | 1.0 |
|
| 464 |
+
| Above 2800 Hz | Unspecified | | | |
|
| 465 |
+
|
| 466 |
+
##### 8.1.1.2 Loss/frequency distortion
|
| 467 |
+
|
| 468 |
+
The loss/frequency distortion should be measured at several frequencies. The limits in Table 1 (column headed "National sections") have to be met, if necessary, by means of an equalizer (see Note 1).
|
| 469 |
+
|
| 470 |
+
##### 8.1.1.3 Group-delay distortion (special quality circuits only)
|
| 471 |
+
|
| 472 |
+
The limits in Table 2 (column headed "National sections") have to be met, if necessary, by means of an equalizer (see Note 1).
|
| 473 |
+
|
| 474 |
+
##### **8.1.1.4 Other characteristics (special quality circuits only)**
|
| 475 |
+
|
| 476 |
+
The remaining characteristics of special quality international leased circuits (see 2.4-2.11/M.1020 [12] and 2.4-2.11/M.1025 [13]) should be treated in accordance with the national practices of the Network Operators/Service Providers concerned, bearing in mind the constitution of the national sections involved. Note that it may not be necessary to measure all such characteristics. For example, quantizing distortion need only be checked when a PCM system is involved, while phase jitter and frequency error might be omitted where the national section is provided solely by audio line plant.
|
| 477 |
+
|
| 478 |
+
It should be noted that satisfactory impulsive noise performance on a circuit is likely to be achieved if the circuit is routed via a 64 kbit/s digital path complying with Recommendation M.2100 [19].
|
| 479 |
+
|
| 480 |
+
The limits given in 2.4-2.11/M.1020 [12] and in 2.4-2.11/M.1025 [13], as appropriate, apply to the overall circuit, and cannot therefore be exceeded by either national section.
|
| 481 |
+
|
| 482 |
+
#### **8.1.2 International section**
|
| 483 |
+
|
| 484 |
+
The following tests should be performed regardless of whether the international section is provided by analogue circuit sections or a combination of analogue, mixed and digital circuit sections.
|
| 485 |
+
|
| 486 |
+
##### **8.1.2.1 Overall loss**
|
| 487 |
+
|
| 488 |
+
The sections comprising the international line (see Figure 2/M.1010 [11]) should be lined up so that when, at the sending terminal international centre, a test signal at a level of $-10 \text{ dBm}0$ is connected to the input of the international line, the level received at the other terminal international centre is as close as possible to $-10 \text{ dBm}0$ . The level at intermediate test points should also be as close as possible to $-10 \text{ dBm}0$ .
|
| 489 |
+
|
| 490 |
+
##### **8.1.2.2 Loss/frequency distortion**
|
| 491 |
+
|
| 492 |
+
The loss/frequency distortion should be measured at several frequencies. The limits in Table 1 (column headed "International section") have to be met, if necessary, by means of an equalizer (see Notes 1 and 2).
|
| 493 |
+
|
| 494 |
+
##### **8.1.2.3 Group-delay distortion (special quality circuits only)**
|
| 495 |
+
|
| 496 |
+
The limits in Table 2 (column headed "International section") have to be met, if necessary, by means of an equalizer (see Notes 1 and 2).
|
| 497 |
+
|
| 498 |
+
##### **8.1.2.4 Other characteristics (special quality circuits only)**
|
| 499 |
+
|
| 500 |
+
Bearing in mind the constitution of the international section, the remaining characteristics of special quality circuits (as specified in 2.4-2.11/M.1020 [12] and 2.4-2.11/M.1025 [13]) should be checked using the measuring instruments and methods of measurement mentioned in clause 7 above.
|
| 501 |
+
|
| 502 |
+
The limits given in 2.4-2.11/M.1020 [12] and 2.4-2.11/M.1025 [13] apply to the overall circuit, and cannot therefore be exceeded by the international section. Staff responsible for the line-up of international leased circuits at the terminal international centres should assess, based on the measured values for the international and national sections, whether or not the overall limits will be met.
|
| 503 |
+
|
| 504 |
+
It should be noted that satisfactory impulsive noise performance on a circuit is likely to be achieved if the circuit is routed via a 64 kbit/s digital path complying with Recommendation M.2100 [19].
|
| 505 |
+
|
| 506 |
+
### **8.2 Lining up the digital-type section**
|
| 507 |
+
|
| 508 |
+
#### **8.2.1 National sections**
|
| 509 |
+
|
| 510 |
+
The national section is provided by a digital link. Tests should be performed according to national practices to ensure that the link shows satisfactory error performance.
|
| 511 |
+
|
| 512 |
+
A performance allocation methodology derived from those described in Recommendation M.1340 [17] may be used to calculate ES and SES performance limits applicable to this link. Percentage performance allocation attributable to this link is the responsibility of the Network Operator/Service Provider concerned. However, it is suggested that national section allocation should not exceed 30% of the overall allocation. This figure would become 15% for the TIC-TNC section.
|
| 513 |
+
|
| 514 |
+
In the above cases, it is assumed that limits specified for analogue parameters will be met.
|
| 515 |
+
|
| 516 |
+
#### 8.2.2 International section
|
| 517 |
+
|
| 518 |
+
The international section is provided by a digital link. It is assumed that limits specified for analogue parameters will be met if this link complies with Recommendation M.1370 [18].
|
| 519 |
+
|
| 520 |
+
The ES and SES performance limits of this digital link should be calculated by using the error performance allocation methodology described in clause 3/M.1340 [17].
|
| 521 |
+
|
| 522 |
+
### 8.3 Overall circuit
|
| 523 |
+
|
| 524 |
+
#### 8.3.1 Configuration and testing of digital-type sections bounded by A/D converters
|
| 525 |
+
|
| 526 |
+
Digital-type sections are directly connected together. Where an analogue-type section is to be connected to a digital-type one, an A/D converter is installed at the end of this digital-type section. Where a national section is a digital-type one, an A/D converter is installed at customer premises.
|
| 527 |
+
|
| 528 |
+
A test should be performed to check overall loss on any portion of the circuit bounded by A/D converters. A 1020 Hz test signal at a level of $-10$ dBm0 is sent to the input of the circuit section; the level received at the other end is as close as possible to $-10$ dBm0.
|
| 529 |
+
|
| 530 |
+
#### 8.3.2 Overall lineup
|
| 531 |
+
|
| 532 |
+
The constituent analogue and digital link sections of the circuit having been satisfactorily lined up, they should be connected together.
|
| 533 |
+
|
| 534 |
+
Where appropriate and possible, the overall circuit should be checked for satisfactory operation (see clause 10 below).
|
| 535 |
+
|
| 536 |
+
**Notes concerning 8.1.1.2, 8.1.1.3, 8.1.2.2 and 8.1.2.3** (Equalization of loss/frequency distortion and group-delay distortion on special quality leased circuits):
|
| 537 |
+
|
| 538 |
+
NOTE 1 – The precise location of any necessary equalizers is left to Network Operators/Service Providers to decide according to national practices. Equalizers built into the modems are not part of the international leased circuit as it is defined in Recommendation M.1010 [11].
|
| 539 |
+
|
| 540 |
+
Routing restrictions may be necessary to achieve the loss/frequency and group-delay distortion limits specified. Factors that may contribute to difficulties in meeting these limits are the number of through-group filters in group links, the number of channel translating equipments, the use of edge channels, heavily loaded cable, etc.
|
| 541 |
+
|
| 542 |
+
NOTE 2 – The Network Operator/Service Provider at the receiving end of the circuit is responsible for seeing that the international section meets the distortion limits in the receive direction of transmission.
|
| 543 |
+
|
| 544 |
+
## 9 Additional reference measurements
|
| 545 |
+
|
| 546 |
+
As part of the lining-up procedure, it may be considered useful to make reference measurements at intermediate points by high-impedance bridging methods, and/or by measurements made on a loop-basis. Such measurements should be carried out under the direction of the circuit control station.
|
| 547 |
+
|
| 548 |
+
## 10 Functional checks
|
| 549 |
+
|
| 550 |
+
Where appropriate and possible, the complete circuit should be checked for satisfactory operation as follows:
|
| 551 |
+
|
| 552 |
+
- Circuit signalling should be checked for satisfactory operation. When the signalling current is transmitted at the level permitted by national regulations, the limits given in the relevant Q-series Recommendations should not be exceeded at the input to the international line.
|
| 553 |
+
- Tests should be made to determine if excessive echo, instability or other impediments to satisfactory operation, are present. For example, by means of a bilateral agreement, the additional characteristics mentioned in clause 6/M.1060 [16] may be checked.
|
| 554 |
+
|
| 555 |
+
## 11 Transmission level checks
|
| 556 |
+
|
| 557 |
+
It should be verified by direct measurement if possible (otherwise by calculation) that when the renter's apparatus is transmitting signals at the level permitted by national regulations, the following limits (see Note 3) are not exceeded at the input to the international line:
|
| 558 |
+
|
| 559 |
+
- Data transmission (Recommendation V.2 [28]) –13 dBm0
|
| 560 |
+
- Voice-frequency telegraphy
|
| 561 |
+
- Amplitude - modulated }
|
| 562 |
+
Frequency - modulated } see 4.1/M.810 [27]
|
| 563 |
+
- Phototelegraph or facsimile
|
| 564 |
+
- Amplitude modulation (white level) –3 dBm0
|
| 565 |
+
- Frequency modulation –13 dBm0
|
| 566 |
+
- Simultaneous transmission of various signals
|
| 567 |
+
- Total power –13 dBm0
|
| 568 |
+
|
| 569 |
+
NOTE 1 – The above limits apply when the whole of the bandwidth is devoted to one particular transmission at any one time. When the band is divided among two or more types of transmission, the power levels permitted by the various Recommendations mentioned above should be reduced by the quantity $10 \log (3100/x)$ dB, where $x$ is the nominal bandwidth in hertz occupied by the transmission concerned.
|
| 570 |
+
|
| 571 |
+
NOTE 2 – In addition to the above specification, discrete frequency signals must comply with the requirements of Recommendation G.224 [6].
|
| 572 |
+
|
| 573 |
+
NOTE 3 – These are considered too high by some Network Operators/Service Providers, and additional study of these limits is anticipated in the future.
|
| 574 |
+
|
| 575 |
+
## 12 Level limiters
|
| 576 |
+
|
| 577 |
+
Where level-limiting devices are fitted on the circuit, they should not introduce distortion when the levels transmitted are within the permitted limits.
|
| 578 |
+
|
| 579 |
+
## 13 Marking of equipment associated with special quality circuits
|
| 580 |
+
|
| 581 |
+
In order to reduce to a minimum interruptions on the circuits, it is necessary that all equipment associated with such circuits (e.g. amplifiers, channel translating equipment, distribution frames, etc.) be positively marked so that the maintenance staff can readily identify it and can therefore avoid causing interruptions to the circuit inadvertently when they carry out maintenance work in repeater stations and exchanges.
|
| 582 |
+
|
| 583 |
+
## 14 Short-time rerouting of special quality leased circuits
|
| 584 |
+
|
| 585 |
+
The *make good* of a special quality circuit in case of a breakdown or planned outage needs special attention in order to keep the circuit characteristics within the required limits.
|
| 586 |
+
|
| 587 |
+
If there is a breakdown or planned interruption of a transmission system, rerouting should be carried out as far as possible at group, supergroup, etc., or digital path level. This would normally not seriously affect the attenuation and group-delay distortion. When such a rerouting of transmission links cannot be effected or when only the circuit concerned is faulty, a reroute circuit or circuit section of similar constitution as that in service should be chosen, in particular with regard to the number of FDM carrier sections and the relative number of analogue and digital circuit sections. The procedure of short-time rerouting at audio level can be facilitated if nominated reroute circuit sections having the same characteristics as the circuit sections of the regular route are available. This consideration also applies to the local line sections.
|
| 588 |
+
|
| 589 |
+
The circuit control station, if not directly involved, should be apprised of short-time rerouting which might affect the operation of the circuit. If a complete line-up is not practical, e.g. due to the expected short duration of the rearrangement, it is a minimum requirement that at least a check of the circuit overall loss at reference frequency and a measurement of the random circuit noise should be made.
|
| 590 |
+
|
| 591 |
+
# ITU-T RECOMMENDATIONS SERIES
|
| 592 |
+
|
| 593 |
+
| | |
|
| 594 |
+
|-----------------|---------------------------------------------------------------------------------------------------------------------------------------|
|
| 595 |
+
| Series A | Organization of the work of the ITU-T |
|
| 596 |
+
| Series B | Means of expression: definitions, symbols, classification |
|
| 597 |
+
| Series C | General telecommunication statistics |
|
| 598 |
+
| Series D | General tariff principles |
|
| 599 |
+
| Series E | Overall network operation, telephone service, service operation and human factors |
|
| 600 |
+
| Series F | Non-telephone telecommunication services |
|
| 601 |
+
| Series G | Transmission systems and media, digital systems and networks |
|
| 602 |
+
| Series H | Audiovisual and multimedia systems |
|
| 603 |
+
| Series I | Integrated services digital network |
|
| 604 |
+
| Series J | Transmission of television, sound programme and other multimedia signals |
|
| 605 |
+
| Series K | Protection against interference |
|
| 606 |
+
| Series L | Construction, installation and protection of cables and other elements of outside plant |
|
| 607 |
+
| <b>Series M</b> | <b>TMN and network maintenance: international transmission systems, telephone circuits, telegraphy, facsimile and leased circuits</b> |
|
| 608 |
+
| Series N | Maintenance: international sound programme and television transmission circuits |
|
| 609 |
+
| Series O | Specifications of measuring equipment |
|
| 610 |
+
| Series P | Telephone transmission quality, telephone installations, local line networks |
|
| 611 |
+
| Series Q | Switching and signalling |
|
| 612 |
+
| Series R | Telegraph transmission |
|
| 613 |
+
| Series S | Telegraph services terminal equipment |
|
| 614 |
+
| Series T | Terminals for telematic services |
|
| 615 |
+
| Series U | Telegraph switching |
|
| 616 |
+
| Series V | Data communication over the telephone network |
|
| 617 |
+
| Series X | Data networks and open system communications |
|
| 618 |
+
| Series Y | Global information infrastructure |
|
| 619 |
+
| Series Z | Programming languages |
|
marked/M/T-REC-M.1060-198811-I_PDF-E/2df09d249c38abee55dbf0526dd6da0a_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1060-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.110-198811-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,148 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
The logo of the International Telecommunication Union (ITU) features a globe with a lightning bolt striking through it, and the letters 'ITU' superimposed on the globe.
|
| 6 |
+
|
| 7 |
+
ITU logo
|
| 8 |
+
|
| 9 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 10 |
+
|
| 11 |
+
**ITU-T**
|
| 12 |
+
|
| 13 |
+
**M.110**
|
| 14 |
+
|
| 15 |
+
TELECOMMUNICATION
|
| 16 |
+
STANDARDIZATION SECTOR
|
| 17 |
+
OF ITU
|
| 18 |
+
|
| 19 |
+
**MAINTENANCE :
|
| 20 |
+
INTRODUCTION AND GENERAL PRINCIPLES**
|
| 21 |
+
|
| 22 |
+
---
|
| 23 |
+
|
| 24 |
+
**CIRCUIT TESTING**
|
| 25 |
+
|
| 26 |
+
**ITU-T Recommendation M.110**
|
| 27 |
+
|
| 28 |
+
(Extract from the *Blue Book*)
|
| 29 |
+
|
| 30 |
+
---
|
| 31 |
+
|
| 32 |
+
# NOTES
|
| 33 |
+
|
| 34 |
+
1 ITU-T Recommendation M.110 was published in Fascicle IV.1 of the *Blue Book*. This file is an extract from the *Blue Book*. While the presentation and layout of the text might be slightly different from the *Blue Book* version, the contents of the file are identical to the *Blue Book* version and copyright conditions remain unchanged (see below).
|
| 35 |
+
|
| 36 |
+
2 In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 37 |
+
|
| 38 |
+
# **CIRCUIT TESTING**
|
| 39 |
+
|
| 40 |
+
## **1 Access points for testing purposes**
|
| 41 |
+
|
| 42 |
+
Access points are required to enable lining-up and subsequent maintenance operations to be performed on international circuits. The required access points are as follows:
|
| 43 |
+
|
| 44 |
+
1.1 Recommendation M.565 describes and defines the access points needed for international public telephone circuits, these points being referred to as “circuit access points” and “line access points”.
|
| 45 |
+
|
| 46 |
+
Line access points and circuit access points (or appropriate means for reaching the circuit access points) should be provided for testing all circuits which are used for the provision of international telecommunication services.
|
| 47 |
+
|
| 48 |
+
Where a circuit uses channel associated signalling, it should be possible to identify and measure at the circuit access points, the signal-transmission parameters, e.g., type of signal, sequence, timing, duration, level and frequency.
|
| 49 |
+
|
| 50 |
+
1.2 Test access points should also be provided for circuits connected through a repeater station in transit from one country to another. Such access points are known as “intermediate access points”.
|
| 51 |
+
|
| 52 |
+
1.3 On a leased circuit, the circuit access points are regarded as being located in the renter's premises, at the demarcation point where connections are made to the terminal equipment used on the circuit<sup>1)</sup>.
|
| 53 |
+
|
| 54 |
+
1.4 Test access points should also be available at the terminal international centre for circuits terminating within the country at a place remote from the international centre, for example, in the premises of the users of leased circuits or in a voice-frequency telegraph terminal station, etc. Such access points, known as line access points, should be available directly or indirectly to the transmission maintenance point (international line) as defined in Recommendation M.1014 [1] for such circuits.
|
| 55 |
+
|
| 56 |
+
1.5 In addition to those mentioned in §§ 1.1 to 1.4 above, access points should be provided on the audio input and output of FDM channel multiplex and primary PCM multiplex equipments.
|
| 57 |
+
|
| 58 |
+
1.6 Access points for testing purposes should be provided on all primary order digital paths. Such access points, known as digital path access points, should be located as near to the ends of the digital path as possible.
|
| 59 |
+
|
| 60 |
+
With suitable digital test equipment, such digital path access points enable in-service circuit monitoring to be carried out when, for example, digital paths are directly interfaced with digital exchanges or transmultiplexers.
|
| 61 |
+
|
| 62 |
+
When the digital path is out of service, this same point can be used to transmit and receive signals for both digital path and circuit testing.
|
| 63 |
+
|
| 64 |
+
1.7 Figure 1/M.110 shows an example of the basic access points for international telephone circuits terminated on an analogue exchange, and for a variety of other telephone-type circuits. Figure 2/M.110 shows the basic access points for telephone circuits terminated on a digital exchange. Figures 1/M.110 and 2/M.110 both show that remote access has been provided to the “circuit access points” of automatic telephone circuits.
|
| 65 |
+
|
| 66 |
+
1.8 Series M Recommendations relating to the various types of international circuits specify how the above-mentioned access points should be used for line-up and maintenance purposes.
|
| 67 |
+
|
| 68 |
+
---
|
| 69 |
+
|
| 70 |
+
<sup>1)</sup> The access points required for digital leased circuits have yet to be specified. This matter is for further study by Study Group IV, in association with Study Group XV.
|
| 71 |
+
|
| 72 |
+

|
| 73 |
+
|
| 74 |
+
Diagram showing various circuit types and their access points. On the left, a vertical list of circuit types is shown: Transit circuit, Automatic telephone circuit, Manual telephone circuit, Telegraph systems, Facsimile circuit, Leased telephone circuit, Leased telegraph system, Leased telegraph and speech circuit, and Leased data circuit. Each circuit type is connected to a series of symbols representing access points and equipment. A bracket labeled 'Note 1' groups two transmission paths: one for 'Analogue transmission' (AE -> CTE) and one for 'Digital transmission' (RS -> PCM MUX -> Digital path access point). A legend on the right defines the symbols: solid line for Analogue transmission, dashed line for Digital transmission, CTE for Channel translating equipment, PCM MUX for PCM multiplex equipment, a dot for Circuit access point, a dot with an 'R' for Circuit access point remotely extended, an X for Line access point, a square with a diagonal line for Digital path access point, an 'I' for Intermediate access point, RS for Relay set or signalling converter, AE for Audio equipment, FAX for Facsimile equipment, DT for Data terminal, a comb-like symbol for Telegraph multiplexing equipment, TAE for Test access equipment (Note 2), a telephone handset for Telephone, a switchboard symbol for Switchboard, and a curved line with a switch for Analogue switch.
|
| 75 |
+
|
| 76 |
+
CCITT-69980
|
| 77 |
+
|
| 78 |
+
d01-sc
|
| 79 |
+
|
| 80 |
+
TDM = Time division multiplex
|
| 81 |
+
VF = Voice frequency multiplex
|
| 82 |
+
|
| 83 |
+
Note 1 — Circuits may be routed by analogue or digital transmission media.
|
| 84 |
+
|
| 85 |
+
Note 2 — Access may be provided by the normal exchange switching equipment, or by separately provided test access switching equipment.
|
| 86 |
+
|
| 87 |
+
FIGURE 1/M.110
|
| 88 |
+
|
| 89 |
+
Access points for analogue international telephone circuits and other telephone-type circuits
|
| 90 |
+
|
| 91 |
+

|
| 92 |
+
|
| 93 |
+
CCITT-69990
|
| 94 |
+
d02-sc
|
| 95 |
+
|
| 96 |
+
Diagram of access points for digital international telephone circuits. A 'Digital exchange' box contains a 'Digital switch' (X) connected to three 'Exchange terminals' (ET). Each ET is preceded by a 'Theoretical location of circuit access point' (dashed box with a dot). The top path leads to 'Digital transmission' through a square symbol. The middle path leads to 'Analogue transmission' through a 'PCM MUX', an 'RS' (Resampler), and a square with an X. The bottom path leads to 'Analogue transmission' through a square symbol and a 'T MUX'. A 'TAE' (Terminal Access Equipment) is connected to the switch and to an external point 'R' via a 'Digital or analogue' line. Note 2 points to the TAE connection.
|
| 97 |
+
|
| 98 |
+

|
| 99 |
+
|
| 100 |
+
| | |
|
| 101 |
+
|--|----------------------------------------------|
|
| 102 |
+
| | Digital switch |
|
| 103 |
+
| | Exchange terminal |
|
| 104 |
+
| | Theoretical location of circuit access point |
|
| 105 |
+
| | Transmultiplexer |
|
| 106 |
+
|
| 107 |
+
Symbol for Digital switch: a square with an X Symbol for Exchange terminal: a rectangle with ET Symbol for Theoretical location of circuit access point: a dashed box with a dot Symbol for Transmultiplexer: a rectangle with T MUX
|
| 108 |
+
|
| 109 |
+
*Note 1* — Other symbols are as indicated in Figure 1/M.110.
|
| 110 |
+
|
| 111 |
+
*Note 2* — Access is normally provided by the exchange switching equipment.
|
| 112 |
+
|
| 113 |
+
FIGURE 2/M.110
|
| 114 |
+
|
| 115 |
+
**Access points for digital international telephone circuits**
|
| 116 |
+
|
| 117 |
+
## 2 Measuring and testing equipment
|
| 118 |
+
|
| 119 |
+
2.1 The basic types of measuring equipment needed in an analogue environment are:
|
| 120 |
+
|
| 121 |
+
- signal generators (fixed and variable frequency oscillators and calibrated sending units),
|
| 122 |
+
- level-measuring sets,
|
| 123 |
+
- calibration units,
|
| 124 |
+
- psophometers,
|
| 125 |
+
- standard frequency source (or access to such a source),
|
| 126 |
+
- equipment for signalling tests.
|
| 127 |
+
|
| 128 |
+
In addition, delay distortion measuring equipment, frequency counters, interruption recorders, programme meters, impulsive noise counters, phase jitter meters, automatic transmission measuring equipment, and equipment for non-linear and total distortion measurement may be required.
|
| 129 |
+
|
| 130 |
+
2.2 The basic types of test and measuring equipment needed in a digital environment are as mentioned in § 2.1 above. This need can be met by equivalent digital test/measuring equipment, or by analogue equipment and the use of a “test coder/decoder” to convert digital access points to analogue access points. In some situations, testers for the following will prove useful:
|
| 131 |
+
|
| 132 |
+
- bit error ratio;
|
| 133 |
+
- error-free or errored seconds;
|
| 134 |
+
- code violations;
|
| 135 |
+
- timing jitter;
|
| 136 |
+
- frame alignment.
|
| 137 |
+
|
| 138 |
+
2.3 The actual requirements for a particular testing centre will depend upon the types of circuit existing at that centre, and the range of tests and measurements that are specified for those circuits in the relevant Series M Recommendations. Reference should also be made to the “facility” requirements specified for the testing points defined in Recommendations M.717, M.718 and M.719.
|
| 139 |
+
|
| 140 |
+
2.4 The implementation of the worldwide transmission and switching plans makes it necessary for international circuits to be lined up and maintained to a very high degree of accuracy.
|
| 141 |
+
|
| 142 |
+
It is essential, therefore, to use measuring equipment of high accuracy and stability in order that the maintenance requirements given in the relevant Series M Recommendations for circuits are met, and to ensure uniformity of measurement results.
|
| 143 |
+
|
| 144 |
+
To this end it is desirable that measuring equipment provided for lining-up and maintaining all classes of circuits should, wherever possible, conform to the measuring instrument specifications given in the Series O Recommendations. Where no CCITT specification is available, the best order of accuracy and stability should be provided, consistent with cost and type of measurement to be made.
|
| 145 |
+
|
| 146 |
+
# Reference
|
| 147 |
+
|
| 148 |
+
- [1] CCITT Recommendation *Transmission maintenance point international line (TMP-IL)*, Vol. IV, Rec. M.1014.
|
marked/M/T-REC-M.1130-199210-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1130-199210-I_PDF-E/6ed175c791b5e156d9c98a8dbcc3318c_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1140-199210-I_PDF-E/2763901b7a1fd1b5d704cdc450d12ed0_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1140-199210-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1140-199210-I_PDF-E/547f726730e589392f239257a833ede3_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1140-199210-I_PDF-E/6ed175c791b5e156d9c98a8dbcc3318c_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1140-199210-I_PDF-E/e6b5ee67ac260b0a3ed3e3c5ad7ea19c_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1140-199210-I_PDF-E/e6df2733626a85205c1db682e6259c46_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1160-199704-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,415 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
ITU logo: A globe with a lightning bolt and the letters ITU.
|
| 6 |
+
|
| 7 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 8 |
+
|
| 9 |
+
**ITU-T**
|
| 10 |
+
|
| 11 |
+
**M.1160**
|
| 12 |
+
|
| 13 |
+
TELECOMMUNICATION
|
| 14 |
+
STANDARDIZATION SECTOR
|
| 15 |
+
OF ITU
|
| 16 |
+
|
| 17 |
+
(04/97)
|
| 18 |
+
|
| 19 |
+
SERIES M: TMN AND NETWORK MAINTENANCE:
|
| 20 |
+
INTERNATIONAL TRANSMISSION SYSTEMS,
|
| 21 |
+
TELEPHONE CIRCUITS, TELEGRAPHY, FACSIMILE
|
| 22 |
+
AND LEASED CIRCUITS
|
| 23 |
+
|
| 24 |
+
Mobile telecommunication systems and services
|
| 25 |
+
|
| 26 |
+
---
|
| 27 |
+
|
| 28 |
+
**Maintenance aspects of aeronautical mobile
|
| 29 |
+
telecommunication service via satellite**
|
| 30 |
+
|
| 31 |
+
ITU-T Recommendation M.1160
|
| 32 |
+
|
| 33 |
+
(Previously CCITT Recommendation)
|
| 34 |
+
|
| 35 |
+
---
|
| 36 |
+
|
| 37 |
+
# ITU-T M-SERIES RECOMMENDATIONS
|
| 38 |
+
|
| 39 |
+
# **TMN AND NETWORK MAINTENANCE: INTERNATIONAL TRANSMISSION SYSTEMS, TELEPHONE CIRCUITS, TELEGRAPHY, FACSIMILE AND LEASED CIRCUITS**
|
| 40 |
+
|
| 41 |
+
| | |
|
| 42 |
+
|---------------------------------------------------------------------------------|----------------------|
|
| 43 |
+
| Introduction and general principles of maintenance and maintenance organization | M.10–M.299 |
|
| 44 |
+
| International transmission systems | M.300–M.559 |
|
| 45 |
+
| International telephone circuits | M.560–M.759 |
|
| 46 |
+
| Common channel signalling systems | M.760–M.799 |
|
| 47 |
+
| International telegraph systems and phototelegraph transmission | M.800–M.899 |
|
| 48 |
+
| International leased group and supergroup links | M.900–M.999 |
|
| 49 |
+
| International leased circuits | M.1000–M.1099 |
|
| 50 |
+
| <b>Mobile telecommunication systems and services</b> | <b>M.1100–M.1199</b> |
|
| 51 |
+
| International public telephone network | M.1200–M.1299 |
|
| 52 |
+
| International data transmission systems | M.1300–M.1399 |
|
| 53 |
+
| Designations and information exchange | M.1400–M.1999 |
|
| 54 |
+
| International transport network | M.2000–M.2999 |
|
| 55 |
+
| Telecommunications management network | M.3000–M.3599 |
|
| 56 |
+
| Integrated services digital networks | M.3600–M.3999 |
|
| 57 |
+
| Common channel signalling systems | M.4000–M.4999 |
|
| 58 |
+
|
| 59 |
+
*For further details, please refer to ITU-T List of Recommendations.*
|
| 60 |
+
|
| 61 |
+
# **ITU-T RECOMMENDATION M.1160**
|
| 62 |
+
|
| 63 |
+
# **MAINTENANCE ASPECTS OF AERONAUTICAL MOBILE TELECOMMUNICATION SERVICE VIA SATELLITE**
|
| 64 |
+
|
| 65 |
+
## **Summary**
|
| 66 |
+
|
| 67 |
+
This Recommendation describes special maintenance requirements for the Aeronautical Mobile-satellite Service.
|
| 68 |
+
|
| 69 |
+
### **Source**
|
| 70 |
+
|
| 71 |
+
ITU-T Recommendation M.1160 was revised by ITU-T Study Group 4 (1997-2000) and was approved under the WTSC Resolution No. 1 procedure on the 19th of April 1997.
|
| 72 |
+
|
| 73 |
+
### **Keywords**
|
| 74 |
+
|
| 75 |
+
Inmarsat-Aero System; Maintenance Aspects; Satellite Aeronautical Mobile.
|
| 76 |
+
|
| 77 |
+
## FOREWORD
|
| 78 |
+
|
| 79 |
+
ITU (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of the ITU. The ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis.
|
| 80 |
+
|
| 81 |
+
The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendations on these topics.
|
| 82 |
+
|
| 83 |
+
The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1.
|
| 84 |
+
|
| 85 |
+
In some areas of information technology which fall within ITU-T's purview, the necessary standards are prepared on a collaborative basis with ISO and IEC.
|
| 86 |
+
|
| 87 |
+
### NOTE
|
| 88 |
+
|
| 89 |
+
In this Recommendation, the expression "Administration" is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 90 |
+
|
| 91 |
+
## INTELLECTUAL PROPERTY RIGHTS
|
| 92 |
+
|
| 93 |
+
The ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. The ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process.
|
| 94 |
+
|
| 95 |
+
As of the date of approval of this Recommendation, the ITU had/had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database.
|
| 96 |
+
|
| 97 |
+
© ITU 1997
|
| 98 |
+
|
| 99 |
+
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU.
|
| 100 |
+
|
| 101 |
+
## CONTENTS
|
| 102 |
+
|
| 103 |
+
###### Page
|
| 104 |
+
|
| 105 |
+
| | | |
|
| 106 |
+
|-------|---------------------------------------------------------------------------------------------------------------------------------------------------------|---|
|
| 107 |
+
| 1 | General..... | 1 |
|
| 108 |
+
| 1.1 | Scope..... | 1 |
|
| 109 |
+
| 1.2 | References..... | 1 |
|
| 110 |
+
| 2 | Available services ..... | 1 |
|
| 111 |
+
| 3 | System configuration ..... | 2 |
|
| 112 |
+
| 3.1 | Aeronautical satellite system ..... | 2 |
|
| 113 |
+
| 3.1.1 | Space segments..... | 2 |
|
| 114 |
+
| 3.1.2 | Aircraft Earth Station (AES) ..... | 2 |
|
| 115 |
+
| 3.1.3 | Aeronautical Ground Earth Station (GES) ..... | 2 |
|
| 116 |
+
| 3.1.4 | Test Terminal (TT)..... | 3 |
|
| 117 |
+
| 3.1.5 | Network Channel Management System (NCMS) ..... | 3 |
|
| 118 |
+
| 3.2 | Interconnection with the international public switched telephone/data network..... | 3 |
|
| 119 |
+
| 4 | General maintenance principles..... | 4 |
|
| 120 |
+
| 5 | Lining-up and maintaining public switched telephone/data circuits ..... | 4 |
|
| 121 |
+
| 6 | Lining-up and maintaining aeronautical satellite circuits..... | 4 |
|
| 122 |
+
| 6.1 | Control, sub-control and responsibilities..... | 4 |
|
| 123 |
+
| 6.1.1 | General..... | 4 |
|
| 124 |
+
| 6.1.2 | Assignment of control stations ..... | 4 |
|
| 125 |
+
| 6.1.3 | Assignment of sub-control stations ..... | 4 |
|
| 126 |
+
| 6.1.4 | Responsibilities of control and sub-control station ..... | 4 |
|
| 127 |
+
| 6.2 | Transmission characteristics ..... | 5 |
|
| 128 |
+
| 6.3 | Lining-up procedures..... | 5 |
|
| 129 |
+
| 6.4 | Fault reporting procedures ..... | 5 |
|
| 130 |
+
| 6.5 | Maintenance procedures ..... | 5 |
|
| 131 |
+
| 7 | Maintenance organization for aeronautical satellite system..... | 6 |
|
| 132 |
+
| 7.1 | Maintenance organization as applicable to Inmarsat..... | 6 |
|
| 133 |
+
| 7.1.1 | Aircraft earth station maintenance responsibility ..... | 6 |
|
| 134 |
+
| 7.1.2 | Ground earth station maintenance responsibility..... | 6 |
|
| 135 |
+
| 7.1.3 | Network channel management system maintenance responsibility..... | 6 |
|
| 136 |
+
| 7.1.4 | Network operations centre maintenance responsibility..... | 6 |
|
| 137 |
+
| 7.2 | Cooperation between the general maintenance organization<br>(Recommendation M.710 [5]) and the aeronautical satellite maintenance<br>organization ..... | 7 |
|
| 138 |
+
|
| 139 |
+
|
| 140 |
+
|
| 141 |
+
# **MAINTENANCE ASPECTS OF AERONAUTICAL MOBILE TELECOMMUNICATION SERVICE VIA SATELLITE**
|
| 142 |
+
|
| 143 |
+
*(1992; revised in 1997)*
|
| 144 |
+
|
| 145 |
+
## **1 General**
|
| 146 |
+
|
| 147 |
+
### **1.1 Scope**
|
| 148 |
+
|
| 149 |
+
The purpose of this Recommendation is to describe the special maintenance procedures and facilities that are required for the maintenance of the Inmarsat aeronautical mobile telecommunication system via satellite, and to define interrelationship and interworking issues of such systems with terrestrial voice and data public/private networks. Wherever possible, the standard maintenance procedures and facilities specified in the M- and O-Series Recommendations, and appropriate X-Series Recommendations for data should be followed for the maintenance of these systems.
|
| 150 |
+
|
| 151 |
+
### **1.2 References**
|
| 152 |
+
|
| 153 |
+
The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published.
|
| 154 |
+
|
| 155 |
+
- [1] CCITT Recommendation M.715 (1988), *Fault report point (circuit)*.
|
| 156 |
+
- [2] CCITT Recommendation M.716 (1988), *Fault report point (network)*.
|
| 157 |
+
- [3] CCITT Recommendation M.1510 (1992), *Exchange of contact point information for the maintenance of international services and the international network*.
|
| 158 |
+
- [4] CCITT Recommendation M.1140 (1992), *Maritime mobile telecommunication services via satellite*.
|
| 159 |
+
- [5] CCITT Recommendation M.710 (1988), *General maintenance organization for the international automatic and semi-automatic telephone service*.
|
| 160 |
+
- [6] ITU-T Recommendation F.127 (1996), *Operational procedures for interworking between the international telex service and the service offered by the Inmarsat-C system*.
|
| 161 |
+
- [7] ITU-T Recommendation X.25 (1996), *Interface between Data Terminal Equipment (DTE) and Data Circuit-terminating Equipment (DCE) for terminals operating in the packet mode and connected to public data networks by dedicated circuit*.
|
| 162 |
+
|
| 163 |
+
## **2 Available services**
|
| 164 |
+
|
| 165 |
+
The aeronautical mobile telecommunication system is intended for the provision of telephone, fax and data communication services to and from aircraft. The range of possible applications for these services includes airline crew and passenger communications (public correspondence), airline operations communications, air traffic control services and distress urgent/safety calls.
|
| 166 |
+
|
| 167 |
+
## **3 System configuration**
|
| 168 |
+
|
| 169 |
+
### **3.1 Aeronautical satellite system**
|
| 170 |
+
|
| 171 |
+
The major elements of the aeronautical satellite system are as follows (see Figure 1):
|
| 172 |
+
|
| 173 |
+
- a) the space segment including satellites (one for each ocean region);
|
| 174 |
+
- b) the Network Channel Management System (NCMS) for each satellite region;
|
| 175 |
+
- c) aeronautical Ground Earth Stations (GESs);
|
| 176 |
+
- d) Aircraft Earth Stations (AESs).
|
| 177 |
+
|
| 178 |
+
#### **3.1.1 Space segments**
|
| 179 |
+
|
| 180 |
+
The space segment comprises the satellite communications transponder(s) for each ocean region and associated frequency bands assigned for use by the aeronautical mobile-satellite system. The ocean regions are the Atlantic East, the Atlantic West, the Pacific and the Indian Ocean.
|
| 181 |
+
|
| 182 |
+
#### **3.1.2 Aircraft Earth Station (AES)**
|
| 183 |
+
|
| 184 |
+
An aircraft earth station interfaces with the space segment (at L-band) for communications with aeronautical ground earth stations, for the purpose of setting up communication with the existing airborne equipment, and with crew and passenger telephone, packet and circuit mode (Recommendation V.22) data, positioning and other avionics equipment, in accordance with the relevant technical and operational requirements.
|
| 185 |
+
|
| 186 |
+
The AES may have various combinations of voice and/or data channels/circuits in typical configurations that define its class and transmission capabilities. The AES interfacing to voice and data terminations can also vary from a simple telephone to complex PBX-like arrangements for voice/circuit mode data and/or a number of packet-mode (ISO 8208) DTEs individually addressable.
|
| 187 |
+
|
| 188 |
+
#### **3.1.3 Aeronautical Ground Earth Station (GES)**
|
| 189 |
+
|
| 190 |
+
An aeronautical ground earth station interfaces with the space segment (at C-band and L-band), on the one hand, and with the fixed voice and data networks on the other hand. It operates in accordance with the relevant technical and operational requirements for communications with AESs.
|
| 191 |
+
|
| 192 |
+
Each GES contains access control and signalling equipment which controls access to the satellite communication system and also acts as a gateway, interfacing with the PSTN and PSPDN or private data network communication links. The GES forms the link between the ground fixed network subscribers and airborne users.
|
| 193 |
+
|
| 194 |
+

|
| 195 |
+
|
| 196 |
+
**Legend:**
|
| 197 |
+
|
| 198 |
+
- Earth Station (Symbol: circle with cross)
|
| 199 |
+
- Satellite (Symbol: circle with antenna)
|
| 200 |
+
- AES Aircraft Earth Station
|
| 201 |
+
- RF Radio Frequency (equipment)
|
| 202 |
+
- IF Intermediate Frequency (equipment)
|
| 203 |
+
- CP Channel Processing (equipment)
|
| 204 |
+
- NCMS Network Channel Management System
|
| 205 |
+
- PBX Private Branch Exchange
|
| 206 |
+
|
| 207 |
+
Figure 1/M.1160 – Configuration of an aeronautical GES and Aircraft Earth Station. The diagram shows two main components: the Aeronautical (Ground) Earth Station (GES) and the Aircraft Earth Station (AES), connected by a satellite communication link. The GES includes terrestrial networks, telephony and data units, AERO channel units, NCMS Aero, IF combiners and splitters, C-band and L-band equipment, and an AES Test terminal. The AES includes a PBX with RF, IF, and CP units, connected to crew and passenger telephones and terminals. A legend defines the symbols for Earth Station and Satellite, and the abbreviations for AES, RF, IF, CP, NCMS, and PBX.
|
| 208 |
+
|
| 209 |
+
NOTE 1 – $+R'$ dBr and $-S'$ dBr in the aeronautical ground earth station correspond to the levels $+R'$ dBm and $-S'$ dBm using a modulation signal with the level of 0 dBm0.
|
| 210 |
+
|
| 211 |
+
NOTE 2 – $+R$ dBr and $-S$ dBr in the aeronautical earth station correspond to the levels of $+R$ dBm and $-S$ dBm using a modulation signal with a level of 0 dBm0.
|
| 212 |
+
|
| 213 |
+
NOTE 3 – See Figure 1/M.1140 [4] for 4-wire test access points.
|
| 214 |
+
|
| 215 |
+
NOTE 4 – Interface protocols for data are those given in Recommendations F.127 [6] and X.25 [7].
|
| 216 |
+
|
| 217 |
+
**Figure 1/M.1160 – Configuration of an aeronautical GES and Aircraft Earth Station**
|
| 218 |
+
|
| 219 |
+
#### 3.1.4 Test Terminal (TT)
|
| 220 |
+
|
| 221 |
+
A test terminal is an aircraft earth station, installed at an aeronautical GES, used for test purposes: it can be either a real AES or special equipment simulating all AES capabilities for testing purposes.
|
| 222 |
+
|
| 223 |
+
#### 3.1.5 Network Channel Management System (NCMS)
|
| 224 |
+
|
| 225 |
+
Each ocean region is served by a NCMS which manages circuit mode channel resources and controls access of the AES to the system. It can be independent of the GES or co-located at designated ground earth stations. A network channel management system interfaces via the space segment (at C-band) with the GESs for the purpose of managing a common pool of circuit mode satellite channels for optional frequency reuse between spot beams of the same region or between different regions. Alternatively, NCMS functions may be incorporated into all GESs of a region until a full NCMS becomes operational for that region. This becomes possible since in such cases a fixed pool of channels is permanently allocated to each GES.
|
| 226 |
+
|
| 227 |
+
### 3.2 Interconnection with the international public switched telephone/data network
|
| 228 |
+
|
| 229 |
+
A circuit between the International Switching Centre (ISC) and aeronautical GES is considered as equivalent to an international public switched telephone/data circuit.
|
| 230 |
+
|
| 231 |
+
X.75 links are used for interfacing with PSDN sub-networks, while X.25 links may be used for directly accessing private service providers or airline networks.
|
| 232 |
+
|
| 233 |
+
## **4 General maintenance principles**
|
| 234 |
+
|
| 235 |
+
In an international connection which includes an Inmarsat aeronautical earth station, the aeronautical satellite system may be regarded, from a transmission point of view, as a national network. Nevertheless, it should be noted that the aeronautical satellite circuit is set up between the aeronautical ground earth station and the aircraft earth station on a demand assignment basis. Therefore, an aeronautical ground earth station in the aeronautical satellite system may not have direct or full responsibility for the maintenance of a particular aeronautical satellite circuit and a particular aircraft earth station all of the time. The operation and maintenance of the overall aeronautical satellite system is the responsibility of the aeronautical satellite system operator, e.g. Inmarsat.
|
| 236 |
+
|
| 237 |
+
The maintenance organization in each participating Administration is, in general, responsible for the maintenance of the aeronautical satellite circuit usually under the guidance and coordination of the Inmarsat Network Operations Center (NOC)<sup>1</sup> and/or Network Channel Management System (NCMS).
|
| 238 |
+
|
| 239 |
+
## **5 Lining-up and maintaining public switched telephone/data circuits**
|
| 240 |
+
|
| 241 |
+
The circuit between the International Switching Centre (ISC) and the aeronautical ground earth station should be lined up and maintained in accordance with those M-Series Recommendations appropriate to international public switched telephone/data circuits.
|
| 242 |
+
|
| 243 |
+
## **6 Lining-up and maintaining aeronautical satellite circuits**
|
| 244 |
+
|
| 245 |
+
### **6.1 Control, sub-control and responsibilities**
|
| 246 |
+
|
| 247 |
+
#### **6.1.1 General**
|
| 248 |
+
|
| 249 |
+
The assignment of control and sub-control stations and respective responsibilities must address the configuration of the aeronautical satellite system. A control station must be assigned as regards circuits, and, in addition, sub-control stations as required for efficient maintenance.
|
| 250 |
+
|
| 251 |
+
#### **6.1.2 Assignment of control stations**
|
| 252 |
+
|
| 253 |
+
The aeronautical ground earth station is the control station for the aeronautical satellite circuit.
|
| 254 |
+
|
| 255 |
+
#### **6.1.3 Assignment of sub-control stations**
|
| 256 |
+
|
| 257 |
+
In principle, the aircraft earth station should act as the sub-control station for the aeronautical satellite circuit. However, the required staff and facilities may not be available on an aircraft to meet the circuit sub-control responsibilities.
|
| 258 |
+
|
| 259 |
+
#### **6.1.4 Responsibilities of control and sub-control station**
|
| 260 |
+
|
| 261 |
+
Control stations dealing with aeronautical satellite circuits should fulfil the responsibilities of control stations as defined in the M-Series Recommendations. The same applies to sub-control stations.
|
| 262 |
+
|
| 263 |
+
---
|
| 264 |
+
|
| 265 |
+
<sup>1</sup> Previously called Network Control Centre (NCC).
|
| 266 |
+
|
| 267 |
+
### 6.2 Transmission characteristics
|
| 268 |
+
|
| 269 |
+
The transmission characteristic and maintenance parameters for GES-AES control and communication (voice and data) channels and the Bit Error Rates shall be as specified by Inmarsat aeronautical system definition and maintenance procedures for such channels.
|
| 270 |
+
|
| 271 |
+
The overall attenuation/frequency limits are shown in Table 1.
|
| 272 |
+
|
| 273 |
+
**Table 1/M.1160 – Attenuation/frequency limits**
|
| 274 |
+
|
| 275 |
+
| Transmission parameters | Maintenance limits (dB) |
|
| 276 |
+
|------------------------------------------------------------------------------------------------|-------------------------|
|
| 277 |
+
| Attenuation frequency relative to the attenuation at reference frequency | (Note) |
|
| 278 |
+
| 300 to 400 Hz | –2.0 to +4.4 |
|
| 279 |
+
| 400 to 600 Hz | –1.2 to +2.6 |
|
| 280 |
+
| 600 to 2400 Hz | –1.2 to +1.2 |
|
| 281 |
+
| 2400 to 2700 Hz | –1.2 to +2.6 |
|
| 282 |
+
| 2700 to 3400 Hz | –1.2 to +4.4 |
|
| 283 |
+
| NOTE – The 1020 Hz reference tone used for measuring the attenuation shall be set at –10 dBm0. | |
|
| 284 |
+
|
| 285 |
+
### 6.3 Lining-up procedures
|
| 286 |
+
|
| 287 |
+
Special Line-up Procedures defined by Inmarsat for starting or restoring service need to be followed to assure:
|
| 288 |
+
|
| 289 |
+
- proper broadcast of satellite network configuration parameters to AESs in region;
|
| 290 |
+
- final adjustments of GES e.i.r.p. and frequency parameters under the supervision of the Inmarsat network operations centre;
|
| 291 |
+
- proper interworking with other GESs in region;
|
| 292 |
+
- that AFC pilot receivers have locked and AFC loops are established;
|
| 293 |
+
- proper operation of all channel types and proper functioning of basic data and voice services in both directions (Air-to-Ground and Ground-to-Air), etc.
|
| 294 |
+
|
| 295 |
+
### 6.4 Fault reporting procedures
|
| 296 |
+
|
| 297 |
+
Fault report points (circuit) should be identified in accordance with Recommendation M.715 [1].
|
| 298 |
+
|
| 299 |
+
Fault report points (network) should be identified in accordance with Recommendation M.716 [2]. One such point is required for the aeronautical satellite system and is assigned to the network operations centre. However, general international networking problems should in the first instance be referred to the fault report points (network) concerned. Inmarsat network or system operating procedures are applicable giving a detailed explanation of fault reporting procedures.
|
| 300 |
+
|
| 301 |
+
Exchange of contact point information should be in accordance with Recommendation M.1510 [3].
|
| 302 |
+
|
| 303 |
+
### 6.5 Maintenance procedures
|
| 304 |
+
|
| 305 |
+
It is desirable that routine measurements on the aeronautical satellite circuits be performed to confirm that the transmission parameter limits continue to be maintained. These maintenance procedures are important with respect to the aeronautical ground earth station transmission performance.
|
| 306 |
+
|
| 307 |
+
## **7 Maintenance organization for aeronautical satellite system**
|
| 308 |
+
|
| 309 |
+
### **7.1 Maintenance organization as applicable to Inmarsat**
|
| 310 |
+
|
| 311 |
+
The maintenance responsibility within the aeronautical satellite network is divided among the aircraft earth station, the ground earth station, the network channel management system, and the network operations centre.
|
| 312 |
+
|
| 313 |
+
#### **7.1.1 Aircraft earth station maintenance responsibility**
|
| 314 |
+
|
| 315 |
+
The aircraft earth station must be capable of communicating reliably with the ground earth station and may act as a sub-control station with responsibilities to the GES. As a sub-control station, it is responsible for reporting noticeable degradations in the aeronautical satellite circuits to the GES and for reporting AES-related problems to manufacturers or system integrators.
|
| 316 |
+
|
| 317 |
+
#### **7.1.2 Ground earth station maintenance responsibility**
|
| 318 |
+
|
| 319 |
+
The ground earth station provides interworking communication functions and has the overall coordination responsibility between the GES and the international public voice/data network, including the responsibility of reporting problems to the network coordination station and the network operations centre as required. It serves as a gateway between the terrestrial networks and the AESs within the coverage area of the particular satellite region. In order to perform its functions, database log-on updates are exchanged between it and the NCMS of its ocean region. As such it has significant capability of detecting and reporting failures of its own equipment.
|
| 320 |
+
|
| 321 |
+
#### **7.1.3 Network channel management system maintenance responsibility**
|
| 322 |
+
|
| 323 |
+
The network channel management system provides communication, limited monitoring, maintenance and support functions within the aeronautical satellite system.
|
| 324 |
+
|
| 325 |
+
- a) Communication NCMS functions include:
|
| 326 |
+
- assigning circuit mode channels to a GES as needed according to traffic load by optimizing space segment (channel) resources within spot beams of its region and between adjacent regions;
|
| 327 |
+
- maintaining a list of active AESs and updating GESs of its ocean region with this information, communicating also with NCMSs of other regions for their proper global update.
|
| 328 |
+
- b) Maintenance and monitoring functions may include:
|
| 329 |
+
- assisting in performing routine system tests;
|
| 330 |
+
- providing minimum capability of the GES performance monitoring in its region and corresponding alarms.
|
| 331 |
+
- c) Other supporting functions include:
|
| 332 |
+
- coordinating network actions in its ocean region in case of serious failure or GES outage;
|
| 333 |
+
- providing performance reports for its region.
|
| 334 |
+
|
| 335 |
+
#### **7.1.4 Network operations centre maintenance responsibility**
|
| 336 |
+
|
| 337 |
+
The network operations centre provides administrative, operational and maintenance functions within the aeronautical satellite network.
|
| 338 |
+
|
| 339 |
+
- a) Administrative functions include:
|
| 340 |
+
- acting as the fault report point (network);
|
| 341 |
+
|
| 342 |
+
- preparing controlling and disseminating system information;
|
| 343 |
+
- providing a focal point for aircraft (or their agents, etc.), Administrations or service providers.
|
| 344 |
+
- b) Routine and normal operational functions include:
|
| 345 |
+
- liaising with the various space segment suppliers;
|
| 346 |
+
- monitoring, identifying and clearing of unauthorized transmissions;
|
| 347 |
+
- scheduling and coordinating the bringing-into-service of GESs and network channel management system;
|
| 348 |
+
- carrying out monitoring of transmission parameters and collecting call-record data for statistic, charging and fault analysis;
|
| 349 |
+
- analysing traffic and performance data provided by network coordination stations and GESs.
|
| 350 |
+
- c) Emergency and/or corrective (maintenance) actions, in case of:
|
| 351 |
+
- space segment failures;
|
| 352 |
+
- extended channel management system failures;
|
| 353 |
+
- failures or outages of individual GESs;
|
| 354 |
+
- incorrect operation of AESs;
|
| 355 |
+
- interference in the network of any kind.
|
| 356 |
+
|
| 357 |
+
### **7.2 Cooperation between the general maintenance organization (Recommendation M.710 [5]) and the aeronautical satellite maintenance organization**
|
| 358 |
+
|
| 359 |
+
Figure 2 illustrates the interrelationship between the general maintenance organization and the aeronautical satellite maintenance organization (Inmarsat).
|
| 360 |
+
|
| 361 |
+

|
| 362 |
+
|
| 363 |
+
The diagram illustrates the interrelationship between the general maintenance organization and the aeronautical satellite maintenance organization (Inmarsat). It is divided into two main sections by a horizontal dashed line, with the top section representing the aeronautical satellite maintenance organization and the bottom section representing the general maintenance organization.
|
| 364 |
+
|
| 365 |
+
**Aeronautical satellite maintenance organization (Inmarsat):**
|
| 366 |
+
|
| 367 |
+
- Aircraft earth station manufacturer's or agent's maintenance organization
|
| 368 |
+
- Aircraft earth station
|
| 369 |
+
- Ground earth station (containing Satellite termination and Terrestrial termination)
|
| 370 |
+
- Network operations centre
|
| 371 |
+
- Network channel management system
|
| 372 |
+
|
| 373 |
+
**General maintenance organization (Rec. M.710 [5]):**
|
| 374 |
+
|
| 375 |
+
- International switching centre
|
| 376 |
+
|
| 377 |
+
**Interconnections:**
|
| 378 |
+
|
| 379 |
+
- Exchange of maintenance information between the organizations:** Indicated by a double-headed arrow with a hollow diamond. This occurs between the Network channel management system and the Ground earth station, and between the General maintenance organization and the Aeronautical satellite maintenance organization.
|
| 380 |
+
- Exchange of maintenance information within the organization:** Indicated by a solid double-headed arrow. This occurs between the Network operations centre and the Network channel management system, between the Network operations centre and the Ground earth station, and between the Aircraft earth station and the Aircraft earth station manufacturer's or agent's maintenance organization.
|
| 381 |
+
|
| 382 |
+
T0406320-96
|
| 383 |
+
|
| 384 |
+
Diagram showing the interrelationship between the general maintenance organization and the aeronautical satellite maintenance organization (Inmarsat).
|
| 385 |
+
|
| 386 |
+
**Figure 2/M.1160 – Interrelationship between the general maintenance organization (Recommendation M.710 [5]) and the aeronautical satellite maintenance organization (Inmarsat)**
|
| 387 |
+
|
| 388 |
+
# ITU-T RECOMMENDATIONS SERIES
|
| 389 |
+
|
| 390 |
+
| | |
|
| 391 |
+
|-----------------|---------------------------------------------------------------------------------------------------------------------------------------|
|
| 392 |
+
| Series A | Organization of the work of the ITU-T |
|
| 393 |
+
| Series B | Means of expression: definitions, symbols, classification |
|
| 394 |
+
| Series C | General telecommunication statistics |
|
| 395 |
+
| Series D | General tariff principles |
|
| 396 |
+
| Series E | Overall network operation, telephone service, service operation and human factors |
|
| 397 |
+
| Series F | Non-telephone telecommunication services |
|
| 398 |
+
| Series G | Transmission systems and media, digital systems and networks |
|
| 399 |
+
| Series H | Audiovisual and multimedia systems |
|
| 400 |
+
| Series I | Integrated services digital network |
|
| 401 |
+
| Series J | Transmission of television, sound programme and other multimedia signals |
|
| 402 |
+
| Series K | Protection against interference |
|
| 403 |
+
| Series L | Construction, installation and protection of cables and other elements of outside plant |
|
| 404 |
+
| <b>Series M</b> | <b>TMN and network maintenance: international transmission systems, telephone circuits, telegraphy, facsimile and leased circuits</b> |
|
| 405 |
+
| Series N | Maintenance: international sound programme and television transmission circuits |
|
| 406 |
+
| Series O | Specifications of measuring equipment |
|
| 407 |
+
| Series P | Telephone transmission quality, telephone installations, local line networks |
|
| 408 |
+
| Series Q | Switching and signalling |
|
| 409 |
+
| Series R | Telegraph transmission |
|
| 410 |
+
| Series S | Telegraph services terminal equipment |
|
| 411 |
+
| Series T | Terminals for telematic services |
|
| 412 |
+
| Series U | Telegraph switching |
|
| 413 |
+
| Series V | Data communication over the telephone network |
|
| 414 |
+
| Series X | Data networks and open system communication |
|
| 415 |
+
| Series Z | Programming languages |
|
marked/M/T-REC-M.1170-199704-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,393 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
ITU logo: A globe with a lightning bolt and the letters ITU.
|
| 6 |
+
|
| 7 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 8 |
+
|
| 9 |
+
**ITU-T**
|
| 10 |
+
|
| 11 |
+
**M.1170**
|
| 12 |
+
|
| 13 |
+
TELECOMMUNICATION
|
| 14 |
+
STANDARDIZATION SECTOR
|
| 15 |
+
OF ITU
|
| 16 |
+
|
| 17 |
+
(04/97)
|
| 18 |
+
|
| 19 |
+
SERIES M: TMN AND NETWORK MAINTENANCE:
|
| 20 |
+
INTERNATIONAL TRANSMISSION SYSTEMS,
|
| 21 |
+
TELEPHONE CIRCUITS, TELEGRAPHY, FACSIMILE
|
| 22 |
+
AND LEASED CIRCUITS
|
| 23 |
+
|
| 24 |
+
Mobile telecommunication systems and services
|
| 25 |
+
|
| 26 |
+
---
|
| 27 |
+
|
| 28 |
+
**Maintenance aspects of mobile digital
|
| 29 |
+
telecommunication service via satellite**
|
| 30 |
+
|
| 31 |
+
ITU-T Recommendation M.1170
|
| 32 |
+
|
| 33 |
+
(Previously CCITT Recommendation)
|
| 34 |
+
|
| 35 |
+
---
|
| 36 |
+
|
| 37 |
+
# ITU-T M-SERIES RECOMMENDATIONS
|
| 38 |
+
|
| 39 |
+
# **TMN AND NETWORK MAINTENANCE: INTERNATIONAL TRANSMISSION SYSTEMS, TELEPHONE CIRCUITS, TELEGRAPHY, FACSIMILE AND LEASED CIRCUITS**
|
| 40 |
+
|
| 41 |
+
| | |
|
| 42 |
+
|---------------------------------------------------------------------------------|----------------------|
|
| 43 |
+
| Introduction and general principles of maintenance and maintenance organization | M.10–M.299 |
|
| 44 |
+
| International transmission systems | M.300–M.559 |
|
| 45 |
+
| International telephone circuits | M.560–M.759 |
|
| 46 |
+
| Common channel signalling systems | M.760–M.799 |
|
| 47 |
+
| International telegraph systems and phototelegraph transmission | M.800–M.899 |
|
| 48 |
+
| International leased group and supergroup links | M.900–M.999 |
|
| 49 |
+
| International leased circuits | M.1000–M.1099 |
|
| 50 |
+
| <b>Mobile telecommunication systems and services</b> | <b>M.1100–M.1199</b> |
|
| 51 |
+
| International public telephone network | M.1200–M.1299 |
|
| 52 |
+
| International data transmission systems | M.1300–M.1399 |
|
| 53 |
+
| Designations and information exchange | M.1400–M.1999 |
|
| 54 |
+
| International transport network | M.2000–M.2999 |
|
| 55 |
+
| Telecommunications management network | M.3000–M.3599 |
|
| 56 |
+
| Integrated services digital networks | M.3600–M.3999 |
|
| 57 |
+
| Common channel signalling systems | M.4000–M.4999 |
|
| 58 |
+
|
| 59 |
+
*For further details, please refer to ITU-T List of Recommendations.*
|
| 60 |
+
|
| 61 |
+
# **ITU-T RECOMMENDATION M.1170**
|
| 62 |
+
|
| 63 |
+
# **MAINTENANCE ASPECTS OF MOBILE DIGITAL TELECOMMUNICATION SERVICE VIA SATELLITE**
|
| 64 |
+
|
| 65 |
+
## **Summary**
|
| 66 |
+
|
| 67 |
+
This Recommendation describes general maintenance aspects of mobile-satellite digital systems for maritime and/or land use predominantly based on INMARSAT-M and INMARSAT-B maintenance requirements.
|
| 68 |
+
|
| 69 |
+
### **Source**
|
| 70 |
+
|
| 71 |
+
ITU-T Recommendation M.1170 was prepared by ITU-T Study Group 4 (1997-2000) and was approved under the WTSC Resolution No. 1 procedure on the 19th of April 1997.
|
| 72 |
+
|
| 73 |
+
### **Keywords**
|
| 74 |
+
|
| 75 |
+
INMARSAT-B, INMARSAT-M; Maintenance Aspects, Mobile Satellite Digital Systems.
|
| 76 |
+
|
| 77 |
+
## FOREWORD
|
| 78 |
+
|
| 79 |
+
ITU (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of the ITU. The ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis.
|
| 80 |
+
|
| 81 |
+
The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendations on these topics.
|
| 82 |
+
|
| 83 |
+
The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1.
|
| 84 |
+
|
| 85 |
+
In some areas of information technology which fall within ITU-T's purview, the necessary standards are prepared on a collaborative basis with ISO and IEC.
|
| 86 |
+
|
| 87 |
+
### NOTE
|
| 88 |
+
|
| 89 |
+
In this Recommendation, the expression "Administration" is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 90 |
+
|
| 91 |
+
### INTELLECTUAL PROPERTY RIGHTS
|
| 92 |
+
|
| 93 |
+
The ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. The ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process.
|
| 94 |
+
|
| 95 |
+
As of the date of approval of this Recommendation, the ITU had/had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database.
|
| 96 |
+
|
| 97 |
+
© ITU 1997
|
| 98 |
+
|
| 99 |
+
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU.
|
| 100 |
+
|
| 101 |
+
## CONTENTS
|
| 102 |
+
|
| 103 |
+
| | <b>Page</b> |
|
| 104 |
+
|-------------------------------------------------------------------------------------------------------------------------------------------------|-------------|
|
| 105 |
+
| 1 General..... | 1 |
|
| 106 |
+
| 1.1 Scope..... | 1 |
|
| 107 |
+
| 1.2 References..... | 1 |
|
| 108 |
+
| 2 Available services..... | 1 |
|
| 109 |
+
| 3 System configuration..... | 2 |
|
| 110 |
+
| 3.1 Space segment..... | 2 |
|
| 111 |
+
| 3.2 Earth facilities..... | 2 |
|
| 112 |
+
| 3.2.1 Land Earth Station (LES) ..... | 2 |
|
| 113 |
+
| 3.2.2 Mobile Earth Station (MES)..... | 4 |
|
| 114 |
+
| 3.2.3 Ship Earth Station (SES) ..... | 4 |
|
| 115 |
+
| 3.2.4 Test terminal..... | 4 |
|
| 116 |
+
| 3.2.5 Network Coordination Station (NCS) ..... | 4 |
|
| 117 |
+
| 4 General maintenance principles..... | 4 |
|
| 118 |
+
| 5 Lining-up and maintaining circuits..... | 4 |
|
| 119 |
+
| 5.1 Terrestrial circuits..... | 4 |
|
| 120 |
+
| 5.1.1 Lining-up and maintaining international public switched telephone circuits | 4 |
|
| 121 |
+
| 5.2 Mobile satellite digital circuits ..... | 5 |
|
| 122 |
+
| 5.2.1 Control, sub-control and responsibilities..... | 5 |
|
| 123 |
+
| 5.2.2 Transmission design characteristics ..... | 5 |
|
| 124 |
+
| 5.2.3 Fault reporting procedures..... | 5 |
|
| 125 |
+
| 6 Test facilities at mobile earth stations..... | 5 |
|
| 126 |
+
| 6.1 Automatic testing..... | 5 |
|
| 127 |
+
| 6.2 Manual testing..... | 5 |
|
| 128 |
+
| 7 Maintenance organization for the mobile satellite digital system..... | 6 |
|
| 129 |
+
| 7.1 Maintenance organization as applicable to the INMARSAT-B/M system..... | 6 |
|
| 130 |
+
| 7.1.1 Mobile Earth Station (MES)/Ship Earth Station (SES) maintenance responsibility..... | 6 |
|
| 131 |
+
| 7.1.2 Land Earth Station (LES) maintenance responsibility..... | 6 |
|
| 132 |
+
| 7.1.3 Network Coordination Station (NCS) maintenance responsibility ..... | 6 |
|
| 133 |
+
| 7.1.4 Network Operations Centre (NOC) maintenance responsibility ..... | 6 |
|
| 134 |
+
| 7.2 Cooperation between the general maintenance organization<br>(Recommendation M.710 [7]) and the maritime satellite maintenance organization. | 7 |
|
| 135 |
+
|
| 136 |
+
|
| 137 |
+
|
| 138 |
+
# **MAINTENANCE ASPECTS OF MOBILE DIGITAL TELECOMMUNICATION SERVICE VIA SATELLITE**
|
| 139 |
+
|
| 140 |
+
*(Geneva, 1997)*
|
| 141 |
+
|
| 142 |
+
# **1 General**
|
| 143 |
+
|
| 144 |
+
## **1.1 Scope**
|
| 145 |
+
|
| 146 |
+
The purpose of this Recommendation is to describe general maintenance procedures and facilities that are required for the maintenance of the mobile digital telecommunication system via satellite (INMARSAT-M and INMARSAT-B, denoted as INMARSAT-M/B hereafter) and define interrelationship and interworking issues of such systems with terrestrial voice and data networks. Wherever possible, the standard maintenance procedures and facilities specified in the M- and O-Series Recommendations, and appropriate X-Series Recommendations for data should be followed for the maintenance of these systems.
|
| 147 |
+
|
| 148 |
+
## **1.2 References**
|
| 149 |
+
|
| 150 |
+
The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published.
|
| 151 |
+
|
| 152 |
+
- [1] CCITT Recommendation M.715 (1988), *Fault report point (circuit)*.
|
| 153 |
+
- [2] CCITT Recommendation M.716 (1988), *Fault report point (network)*.
|
| 154 |
+
- [3] CCITT Recommendation M.1510 (1992), *Exchange of contact point information for the maintenance of international services and the international network*.
|
| 155 |
+
- [4] ITU-T Recommendation F.127 (1996), *Operational procedures for interworking between the international telex service and the service offered by the INMARSAT-C system*.
|
| 156 |
+
- [5] ITU-T Recommendation X.25 (1996), *Interface between Data Terminal Equipment (DTE) and Data Circuit-terminating Equipment (DCE) for terminals operating in the packet mode and connected to public data networks by dedicated circuit*.
|
| 157 |
+
- [6] CCITT Recommendation M.1140 (1992), *Maritime mobile telecommunication services via satellite*.
|
| 158 |
+
- [7] CCITT Recommendation M.710 (1988), *General maintenance organization for the international automatic and semi-automatic telephone service*.
|
| 159 |
+
- [8] CCITT Recommendation O.11 (1992), *Maintenance access lines*.
|
| 160 |
+
|
| 161 |
+
## **2 Available services**
|
| 162 |
+
|
| 163 |
+
The mobile digital telecommunication system is intended for the provision of telephone, facsimile, telex and data communication services.
|
| 164 |
+
|
| 165 |
+
## **3 System configuration**
|
| 166 |
+
|
| 167 |
+
The INMARSAT-M/B system consists of the following major elements per ocean region (see Figure 1):
|
| 168 |
+
|
| 169 |
+
- a) the space segment including satellites;
|
| 170 |
+
- b) the Network Coordination Station (NCS);
|
| 171 |
+
- c) Land Earth Stations (LESs);
|
| 172 |
+
- d) Mobile Earth Stations (MESs);
|
| 173 |
+
- e) Ship Earth Station (SES);
|
| 174 |
+
|
| 175 |
+
### **3.1 Space segment**
|
| 176 |
+
|
| 177 |
+
The space segment comprises the satellite communications transponder(s) for each ocean region and associated frequency bands assigned for use by the INMARSAT-M/B system. The ocean regions are the Atlantic East, the Atlantic West, the Pacific and the Indian Oceans.
|
| 178 |
+
|
| 179 |
+
## **3.2 Earth facilities**
|
| 180 |
+
|
| 181 |
+
### **3.2.1 Land Earth Station (LES)**
|
| 182 |
+
|
| 183 |
+
A land earth station in the mobile-satellite service is an earth station which interfaces with the space segment (at C-band and L-band) on the one hand and with the fixed voice and data networks on the other hand.
|
| 184 |
+
|
| 185 |
+

|
| 186 |
+
|
| 187 |
+
The diagram illustrates the configuration of the INMARSAT-M/B system. It consists of two main stations: the Land Earth Station (LES) and the Mobile Earth Station (MES) / Ship Earth Station (SES), connected by a satellite communication link.
|
| 188 |
+
|
| 189 |
+
**Land Earth Station (LES):** This station is connected to terrestrial networks for telephony, facsimile, telex, and data. It contains a block for "Telephony facsimile telex and data" which outputs signals at levels $+R'$ dBr and $-S'$ dBr (Note: these correspond to $+R'$ dBm and $-S'$ dBm using a modulation signal with the level of 0 dBm0). These signals pass through "Channel units" and then to an "IF combine and splitters" block. Below this block is a "MES/SES Test" unit. The "IF combine and splitters" block connects to "C-band equip" and "L-band equip", which in turn connect to an earth station antenna. This antenna communicates with a satellite via a "C-band" uplink and an "L-band" downlink.
|
| 190 |
+
|
| 191 |
+
**Mobile Earth Station (MES) / Ship Earth Station (SES):** This station receives signals from the satellite via an "L-band" antenna. The signal passes through a block labeled "R F I F C P" (Radio Frequency, Intermediate Frequency, Channel Processing). Below this block is the "MES/SES" unit. The "R F I F C P" block connects to four terminals: "Telephone terminal", "Facsimile terminal", "Telex terminal", and "Data terminal".
|
| 192 |
+
|
| 193 |
+
**Communication Link:** The link between the LES and the MES/SES is labeled "Communication link" and involves a satellite.
|
| 194 |
+
|
| 195 |
+
**Legend:**
|
| 196 |
+
|
| 197 |
+
- RF Radio Frequency (equipment)
|
| 198 |
+
- IF Intermediate Frequency (equipment)
|
| 199 |
+
- CP Channel Processing (equipment)
|
| 200 |
+
- Earth station (represented by a circle with a cross)
|
| 201 |
+
- Satellite (represented by a circle with a dot)
|
| 202 |
+
|
| 203 |
+
**System Definitions:**
|
| 204 |
+
|
| 205 |
+
- MES/SES:** The Mobile Earth Station or Ship Earth Station.
|
| 206 |
+
- Mobile satellite digital circuit:** The path from the LES to the MES/SES.
|
| 207 |
+
- Mobile local system:** The internal components of the MES/SES connecting to the terminals.
|
| 208 |
+
- Mobile satellite digital system:** The combination of the mobile satellite digital circuit and the mobile local system.
|
| 209 |
+
|
| 210 |
+
T0406470-96
|
| 211 |
+
|
| 212 |
+
Configuration of INMARSAT-M/B system diagram showing Land Earth Station (LES), Mobile Earth Station (MES)/Ship Earth Station (SES), and their internal components connected via a satellite communication link.
|
| 213 |
+
|
| 214 |
+
NOTE – $+R'$ dBr and $-S'$ dBr in the land earth station correspond to the levels $+R'$ dBm and $-S'$ dBm using a modulation signal with the level of 0 dBm0.
|
| 215 |
+
|
| 216 |
+
Figure 1/M.1170 – Configuration of INMARSAT-M/B system
|
| 217 |
+
|
| 218 |
+
### **3.2.2 Mobile Earth Station (MES)**
|
| 219 |
+
|
| 220 |
+
A mobile earth station in the mobile-satellite service is a station which provides an interface for connection of a mobile satellite digital circuit to a mobile local system (see Figure 1). This generic definition applies to both maritime and land mobile (INMARSAT-M) terminals.
|
| 221 |
+
|
| 222 |
+
### **3.2.3 Ship Earth Station (SES)**
|
| 223 |
+
|
| 224 |
+
A ship earth station in the mobile-satellite service is a maritime station which provides an interface for connection of a mobile satellite digital circuit to a mobile local system (see Figure 1).
|
| 225 |
+
|
| 226 |
+
### **3.2.4 Test terminal**
|
| 227 |
+
|
| 228 |
+
A test terminal is a ship or mobile earth station installed at each LES and used for test purposes. In this regard, the maritime test terminal may carry out some tests, normally considered to be within the province of a sub-control station, on behalf of a mobile earth station.
|
| 229 |
+
|
| 230 |
+
### **3.2.5 Network Coordination Station (NCS)**
|
| 231 |
+
|
| 232 |
+
Each ocean region is served by an NCS which manages common space segment resources and controls access of MESs to the system. The NCS provides central control of satellite channel resources to LESs and MESs/SESs within an ocean region. It maintains a pool of frequencies, assigns frequencies on demand to LESs, and supervises and monitors the use of these frequencies. In addition, it administers common data, e.g. MES/SES identify lists and system parameters, and is responsible for collection of call-record information for statistical purposes.
|
| 233 |
+
|
| 234 |
+
## **4 General maintenance principles**
|
| 235 |
+
|
| 236 |
+
In an international connection which includes a mobile earth station, the mobile satellite digital system may be regarded, from a transmission point of view, as analogous to a national network, and the mobile local system as analogous to a subscriber terminal within that network. Nevertheless, it should be noted that the mobile satellite digital circuit is set up between the land earth station and the mobile earth station on a demand assignment basis. Therefore, a land earth station in a mobile system may not have direct responsibility for the maintenance of a particular mobile satellite digital circuit and a particular mobile earth station all of the time. The operation and maintenance of the overall INMARSAT mobile satellite digital system is the responsibility of the mobile satellite digital system operator.
|
| 237 |
+
|
| 238 |
+
The maintenance organization in each participating Administration is, in general, responsible for the maintenance of the mobile satellite digital circuit usually under the guidance and coordination of the Network Operations Centre (NOC) and/or NCS.
|
| 239 |
+
|
| 240 |
+
## **5 Lining-up and maintaining circuits**
|
| 241 |
+
|
| 242 |
+
## **5.1 Terrestrial circuits**
|
| 243 |
+
|
| 244 |
+
### **5.1.1 Lining-up and maintaining international public switched telephone circuits**
|
| 245 |
+
|
| 246 |
+
The circuit between the international telephone switching centre and the land earth station should be lined up and maintained in accordance with those M-Series Recommendations appropriate to international switched telephone/facsimile/data circuits and specific procedures of the INMARSAT mobile satellite system operator.
|
| 247 |
+
|
| 248 |
+
## **5.2 Mobile satellite digital circuits**
|
| 249 |
+
|
| 250 |
+
### **5.2.1 Control, sub-control and responsibilities**
|
| 251 |
+
|
| 252 |
+
##### **5.2.1.1 General**
|
| 253 |
+
|
| 254 |
+
The assignment of control and sub-control stations and respective responsibilities must be addressed according to the configuration of the mobile satellite digital system. A control station must be assigned to each circuit and, in addition, sub-control stations as required for efficient maintenance.
|
| 255 |
+
|
| 256 |
+
##### **5.2.1.2 Assignment of control stations**
|
| 257 |
+
|
| 258 |
+
The land earth station is the control station for the mobile satellite digital circuit.
|
| 259 |
+
|
| 260 |
+
##### **5.2.1.3 Assignment of sub-control stations**
|
| 261 |
+
|
| 262 |
+
In principle, the ship earth station or the mobile earth station should act as the sub-control station for the mobile satellite digital circuits. However, the required staff and facilities may not always be available to meet the circuit sub-control responsibilities.
|
| 263 |
+
|
| 264 |
+
##### **5.2.1.4 Responsibilities of control and sub-control station**
|
| 265 |
+
|
| 266 |
+
Control stations dealing with mobile satellite digital circuits should fulfill the responsibilities of control stations as defined in the M-Series Recommendations. The same applies to sub-control stations.
|
| 267 |
+
|
| 268 |
+
#### **5.2.2 Transmission design characteristics**
|
| 269 |
+
|
| 270 |
+
The transmission design characteristics for such satellite channels are defined by the satellite system operator for the INMARSAT-M/B system.
|
| 271 |
+
|
| 272 |
+
### **5.2.3 Fault reporting procedures**
|
| 273 |
+
|
| 274 |
+
Fault report points (circuits) should be identified in accordance with Recommendation M. 715 [1]. Fault report points (network) should be identified in accordance with Recommendation M.716 [2]. One such point for the INMARSAT networks is the Network Operations Centre (NOC). However, international networking problems should be referred to the fault report points (network) concerned. Exchange of contact point information should be in accordance with Recommendation M.1510 [3].
|
| 275 |
+
|
| 276 |
+
## **6 Test facilities at mobile earth stations**
|
| 277 |
+
|
| 278 |
+
## **6.1 Automatic testing**
|
| 279 |
+
|
| 280 |
+
Mobile units operated in mobile environments would not in general have personnel with adequate expertise for testing and maintaining equipment connected to the international network. Therefore, remote automatic testing of a mobile earth station would be possible by including automatic test equipment at the land earth station and the mobile earth station. The required facilities include quiet termination test line and loop around test line as given in Recommendation O.11 [8].
|
| 281 |
+
|
| 282 |
+
## **6.2 Manual testing**
|
| 283 |
+
|
| 284 |
+
It should be possible to undertake manual testing of the transmission performance of mobile earth stations. This type of test is essential when a mobile earth station is being lined-up after it has been repaired. It should be possible to initiate the test either from the land earth station or from the mobile earth station.
|
| 285 |
+
|
| 286 |
+
## **7 Maintenance organization for the mobile satellite digital system**
|
| 287 |
+
|
| 288 |
+
## **7.1 Maintenance organization as applicable to the INMARSAT-B/M system**
|
| 289 |
+
|
| 290 |
+
The maintenance responsibility within a mobile satellite digital network is divided among the mobile earth station, the land earth station, the network coordination station, and the network operations centre.
|
| 291 |
+
|
| 292 |
+
### **7.1.1 Mobile Earth Station (MES)/Ship Earth Station (SES) maintenance responsibility**
|
| 293 |
+
|
| 294 |
+
The mobile earth station must be capable of communicating reliably with the land earth station and may act as a sub-control station with responsibilities to the land earth station. As a sub-control station, it is responsible for reporting noticeable degradation in the mobile satellite digital circuits to the land earth station and for reporting mobile earth station problems to the manufacturer's or mobile's maintenance agent.
|
| 295 |
+
|
| 296 |
+
### **7.1.2 Land Earth Station (LES) maintenance responsibility**
|
| 297 |
+
|
| 298 |
+
The land earth station provides communication functions and has the overall coordination responsibility between the mobile earth station and the international public switched telephone network, and the responsibility of reporting problems to the network coordination station and the network operations centre as required.
|
| 299 |
+
|
| 300 |
+
### **7.1.3 Network Coordination Station (NCS) maintenance responsibility**
|
| 301 |
+
|
| 302 |
+
The network coordination station provides communication, maintenance, monitoring and support functions within the mobile satellite digital system.
|
| 303 |
+
|
| 304 |
+
- a) Communication functions include:
|
| 305 |
+
- transmitting the signalling channel to the mobile earth station;
|
| 306 |
+
- assigning communication channels on demand;
|
| 307 |
+
- maintaining a list of busy mobile earth stations.
|
| 308 |
+
- b) Maintenance and monitoring functions include:
|
| 309 |
+
- assisting in performing routine system tests;
|
| 310 |
+
- monitoring the performance of land earth station;
|
| 311 |
+
- monitoring, identifying and clearing of unauthorized transmissions.
|
| 312 |
+
|
| 313 |
+
### **7.1.4 Network Operations Centre (NOC) maintenance responsibility**
|
| 314 |
+
|
| 315 |
+
The operations centre provides administrative, operational and maintenance functions within the mobile satellite digital network.
|
| 316 |
+
|
| 317 |
+
- a) Administrative functions include:
|
| 318 |
+
- acting as the fault report point;
|
| 319 |
+
- preparing, controlling and disseminating system information.
|
| 320 |
+
- b) Routine and normal operational tasks include:
|
| 321 |
+
- carrying out some limited monitoring of transmission parameters;
|
| 322 |
+
- analyzing traffic and performance data provided by network coordination stations and land earth stations.
|
| 323 |
+
- c) Emergency and/or corrective actions, including, as required, the issue of broadcast network advisory message to mobile earth stations, in case of:
|
| 324 |
+
- space segment failures;
|
| 325 |
+
|
| 326 |
+
- failures of individual land earth stations;
|
| 327 |
+
- incorrect operation of mobile earth stations;
|
| 328 |
+
- interference in the network.
|
| 329 |
+
|
| 330 |
+
## 7.2 Cooperation between the general maintenance organization (Recommendation M.710 [7]) and the maritime satellite maintenance organization
|
| 331 |
+
|
| 332 |
+
Figure 2 illustrates the interrelationship between the general maintenance organization and the mobile satellite maintenance organization (INMARSAT).
|
| 333 |
+
|
| 334 |
+

|
| 335 |
+
|
| 336 |
+
The diagram illustrates the interrelationship between the general maintenance organization and the mobile satellite maintenance organization (INMARSAT). It is divided into two main sections by a horizontal dashed line: the Mobile satellite maintenance organization (top) and the General maintenance organization (Rec. M.710 [7]) (bottom).
|
| 337 |
+
|
| 338 |
+
**Mobile satellite maintenance organization (top section):**
|
| 339 |
+
|
| 340 |
+
- A box labeled "MES/SES manufacturer's or agent's maintenance organization" is connected to a box labeled "Mobile earth station/Ship earth station" by a double-headed arrow.
|
| 341 |
+
- The "Mobile earth station/Ship earth station" is connected to a box labeled "Land earth station" by a double-headed arrow.
|
| 342 |
+
- The "Land earth station" is connected to a box labeled "Network operations centre" by a double-headed arrow.
|
| 343 |
+
- The "Network operations centre" is connected to a box labeled "Network coordination station" by a double-headed arrow.
|
| 344 |
+
|
| 345 |
+
**General maintenance organization (Rec. M.710 [7]) (bottom section):**
|
| 346 |
+
|
| 347 |
+
- A box labeled "International switching centre" is connected to the "Land earth station" by a double-headed arrow.
|
| 348 |
+
|
| 349 |
+
**Inter-organization connections:**
|
| 350 |
+
|
| 351 |
+
- The "Land earth station" is split into two sub-sections: "Satellite termination" (top) and "Terrestrial termination" (bottom).
|
| 352 |
+
- The "Network coordination station" is connected to the "Terrestrial termination" section of the "Land earth station" by a double-headed arrow.
|
| 353 |
+
- A vertical double-headed arrow on the right side of the dashed line connects the "Mobile satellite maintenance organization" and the "General maintenance organization (Rec. M.710 [7])".
|
| 354 |
+
|
| 355 |
+
**Legend:**
|
| 356 |
+
|
| 357 |
+
- $\longleftrightarrow$ Exchange of maintenance information between the organizations
|
| 358 |
+
- $\leftrightarrow$ Exchange of maintenance information within the organization
|
| 359 |
+
|
| 360 |
+
T0406480-96
|
| 361 |
+
|
| 362 |
+
Diagram illustrating the interrelationship between the general maintenance organization and the mobile satellite maintenance organization (INMARSAT).
|
| 363 |
+
|
| 364 |
+
**Figure 2/M.1170 – Interrelationship between the general maintenance organization (Recommendation M.710 [7]) and the mobile satellite maintenance organization (INMARSAT)**
|
| 365 |
+
|
| 366 |
+
# ITU-T RECOMMENDATIONS SERIES
|
| 367 |
+
|
| 368 |
+
| | |
|
| 369 |
+
|-----------------|---------------------------------------------------------------------------------------------------------------------------------------|
|
| 370 |
+
| Series A | Organization of the work of the ITU-T |
|
| 371 |
+
| Series B | Means of expression: definitions, symbols, classification |
|
| 372 |
+
| Series C | General telecommunication statistics |
|
| 373 |
+
| Series D | General tariff principles |
|
| 374 |
+
| Series E | Overall network operation, telephone service, service operation and human factors |
|
| 375 |
+
| Series F | Non-telephone telecommunication services |
|
| 376 |
+
| Series G | Transmission systems and media, digital systems and networks |
|
| 377 |
+
| Series H | Audiovisual and multimedia systems |
|
| 378 |
+
| Series I | Integrated services digital network |
|
| 379 |
+
| Series J | Transmission of television, sound programme and other multimedia signals |
|
| 380 |
+
| Series K | Protection against interference |
|
| 381 |
+
| Series L | Construction, installation and protection of cables and other elements of outside plant |
|
| 382 |
+
| <b>Series M</b> | <b>TMN and network maintenance: international transmission systems, telephone circuits, telegraphy, facsimile and leased circuits</b> |
|
| 383 |
+
| Series N | Maintenance: international sound programme and television transmission circuits |
|
| 384 |
+
| Series O | Specifications of measuring equipment |
|
| 385 |
+
| Series P | Telephone transmission quality, telephone installations, local line networks |
|
| 386 |
+
| Series Q | Switching and signalling |
|
| 387 |
+
| Series R | Telegraph transmission |
|
| 388 |
+
| Series S | Telegraph services terminal equipment |
|
| 389 |
+
| Series T | Terminals for telematic services |
|
| 390 |
+
| Series U | Telegraph switching |
|
| 391 |
+
| Series V | Data communication over the telephone network |
|
| 392 |
+
| Series X | Data networks and open system communication |
|
| 393 |
+
| Series Z | Programming languages |
|
marked/M/T-REC-M.1230-199605-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,464 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
ITU logo: A globe with a lightning bolt and the letters ITU.
|
| 6 |
+
|
| 7 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 8 |
+
|
| 9 |
+
**ITU-T**
|
| 10 |
+
|
| 11 |
+
TELECOMMUNICATION
|
| 12 |
+
STANDARDIZATION SECTOR
|
| 13 |
+
OF ITU
|
| 14 |
+
|
| 15 |
+
**M.1230**
|
| 16 |
+
|
| 17 |
+
(05/96)
|
| 18 |
+
|
| 19 |
+
SERIES M: MAINTENANCE: INTERNATIONAL
|
| 20 |
+
TRANSMISSION SYSTEMS, TELEPHONE CIRCUITS,
|
| 21 |
+
TELEGRAPHY, FACSIMILE AND LEASED CIRCUITS
|
| 22 |
+
International public telephone network
|
| 23 |
+
|
| 24 |
+
---
|
| 25 |
+
|
| 26 |
+
**Method to improve the management
|
| 27 |
+
of operations and maintenance processes
|
| 28 |
+
in the International Telephone Network**
|
| 29 |
+
|
| 30 |
+
ITU-T Recommendation M.1230
|
| 31 |
+
|
| 32 |
+
(Previously «CCITT Recommendation»)
|
| 33 |
+
|
| 34 |
+
---
|
| 35 |
+
|
| 36 |
+
# ITU-T M-SERIES RECOMMENDATIONS **MAINTENANCE: INTERNATIONAL TRANSMISSION SYSTEMS, TELEPHONE CIRCUITS, TELEGRAPHY, FACSIMILE AND LEASED CIRCUITS**
|
| 37 |
+
|
| 38 |
+
| | |
|
| 39 |
+
|---------------------------------------------------------------------------------|----------------------|
|
| 40 |
+
| Introduction and general principles of maintenance and maintenance organization | M.10-M.299 |
|
| 41 |
+
| International transmission systems | M.300-M.559 |
|
| 42 |
+
| International telephone circuits | M.560-M.759 |
|
| 43 |
+
| Common channel signalling systems | M.760-M.799 |
|
| 44 |
+
| International telegraph systems and phototelegraph transmission | M.800-M.899 |
|
| 45 |
+
| International leased group and supergroup links | M.900-M.999 |
|
| 46 |
+
| International leased circuits | M.1000-M.1099 |
|
| 47 |
+
| Mobile telecommunication systems and services | M.1100-M.1199 |
|
| 48 |
+
| <b>International public telephone network</b> | <b>M.1200-M.1299</b> |
|
| 49 |
+
| International data transmission systems | M.1300-M.1399 |
|
| 50 |
+
| Designations and information exchange | M.1400-M.1999 |
|
| 51 |
+
| International transport network | M.2000-M.2999 |
|
| 52 |
+
| Telecommunications management network | M.3000-M.3599 |
|
| 53 |
+
| Integrated services digital networks | M.3600-M.3999 |
|
| 54 |
+
| Common channel signalling systems | M.4000-M.4999 |
|
| 55 |
+
|
| 56 |
+
*For further details, please refer to ITU-T List of Recommendations.*
|
| 57 |
+
|
| 58 |
+
## FOREWORD
|
| 59 |
+
|
| 60 |
+
The ITU-T (Telecommunication Standardization Sector) is a permanent organ of the International Telecommunication Union (ITU). The ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis.
|
| 61 |
+
|
| 62 |
+
The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendations on these topics.
|
| 63 |
+
|
| 64 |
+
The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1 (Helsinki, March 1-12, 1993).
|
| 65 |
+
|
| 66 |
+
ITU-T Recommendation M.1230 was revised by ITU-T Study Group 4 (1993-1996) and was approved under the WTSC Resolution No. 1 procedure on the 12th of May 1996.
|
| 67 |
+
|
| 68 |
+
---
|
| 69 |
+
|
| 70 |
+
## NOTE
|
| 71 |
+
|
| 72 |
+
In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 73 |
+
|
| 74 |
+
© ITU 1996
|
| 75 |
+
|
| 76 |
+
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU.
|
| 77 |
+
|
| 78 |
+
## CONTENTS
|
| 79 |
+
|
| 80 |
+
| | <i>Page</i> |
|
| 81 |
+
|----------------------------------------------------------------------------------------------------------------------------|-------------|
|
| 82 |
+
| 1 Scope ..... | 1 |
|
| 83 |
+
| 2 General ..... | 1 |
|
| 84 |
+
| 3 Assessment of network performance from the point of view of maintenance ..... | 2 |
|
| 85 |
+
| 4 Major NP parameters for end-to-end measurements ..... | 3 |
|
| 86 |
+
| 5 Review of present methods for assessing overall (end-to-end) network performance ..... | 4 |
|
| 87 |
+
| 5.1 Test calls methods (intrusive measurements) ..... | 4 |
|
| 88 |
+
| 5.2 Service Quality observations (non-intrusive measurements) ..... | 5 |
|
| 89 |
+
| 5.3 Considerations of the methods of network performance assessment ..... | 6 |
|
| 90 |
+
| 6 General method for the optimization of the Operations and Maintenance (O&M) processes ..... | 6 |
|
| 91 |
+
| Annex A – Example of Context Difficulty Index (CDI) in an O&M environment where transmission aspects are predominant ..... | 8 |
|
| 92 |
+
| References ..... | 9 |
|
| 93 |
+
|
| 94 |
+
## **ABSTRACT**
|
| 95 |
+
|
| 96 |
+
This Recommendation describes general guidelines for Telecommunications Operators in order that they can improve the QOS and NP through the optimization of Operation and Maintenance (O&M) processes focusing on the customer satisfaction of the telephone service. The proposed method foresees the correlation between the assessment performance results of the international telephone network with a general index which represents the difficulty levels of O&M environment.
|
| 97 |
+
|
| 98 |
+
## **KEYWORDS**
|
| 99 |
+
|
| 100 |
+
Context Difficulty Index (CDI), Customer, Maintenance, Network Performance (NP), Operations, Operations and Maintenance (O&M) processes, Quality of Service (QOS), Telecommunications Operator (TO) – Administrations, ROAs, Carriers, etc.
|
| 101 |
+
|
| 102 |
+
|
| 103 |
+
|
| 104 |
+
# METHOD TO IMPROVE THE MANAGEMENT OF OPERATIONS AND MAINTENANCE PROCESSES IN THE INTERNATIONAL TELEPHONE NETWORK
|
| 105 |
+
|
| 106 |
+
*(Melbourne, 1988; revised in 1996)*
|
| 107 |
+
|
| 108 |
+
## 1 Scope
|
| 109 |
+
|
| 110 |
+
This Recommendation provides a reference model which includes both the description of the main parameters and different methods to assess the network performance. The description of a Context Difficulty Index (CDI) which is related to several components of the network and the O&M environment is also provided. It is possible to evaluate the service level performance from CDI and thus decide for any change or intervention as required to improve the perceived quality of the service to the customer.
|
| 111 |
+
|
| 112 |
+
It is not the intention of this Recommendation to:
|
| 113 |
+
|
| 114 |
+
- i) suggest any particular method or technology for the assessment of the network performance;
|
| 115 |
+
- ii) standardize any specific O&M process (e.g. internal organization, O&M procedure, etc.);
|
| 116 |
+
- iii) establish any specific objectives, target and thresholds for QOS and NP parameters;
|
| 117 |
+
- iv) set any level of Customer Satisfaction.
|
| 118 |
+
|
| 119 |
+
The choice or decision on all the above issues is left to individual TO or to specific arrangements between TOs (e.g. when TOs jointly establish formal Service Quality Agreements with the major aim to develop mutually acceptable performance standards and to enable customer expectations to be met [14]).
|
| 120 |
+
|
| 121 |
+
## 2 General
|
| 122 |
+
|
| 123 |
+
With the increased liberalization and consequent competitive telecommunication scenarios, there is an increased need to find out in various ways how the network is performing to meet customer expectation. All Network and/or Service Providers, who in the past provided only network capacity and then maintained performance level by using different maintenance methods specified in ITU-T Recommendations, are now more and more focused on the improvement of NP and QOS<sup>1)</sup> as experienced by customers.
|
| 124 |
+
|
| 125 |
+
To meet these main objectives, each TO has introduced and developed a wide range of test procedures and quality assessment methods<sup>2)</sup> in order to test the network both objectively and subjectively and to ensure a better and better QOS to their customers [1] to [20].
|
| 126 |
+
|
| 127 |
+
It is also very important to note that modern telecommunication systems have a great deal of built-in facilities through which it is possible to ensure a continuous and automatic supervision of performance parameters.
|
| 128 |
+
|
| 129 |
+
---
|
| 130 |
+
|
| 131 |
+
1) QOS is defined as “the collective effect of service performance which determines the degree of satisfaction of a user of the service” [16]. Thus QOS is of concern to the user of the Service Provider. When the Network Provider is also the Service Provider he is responsible for the QOS.
|
| 132 |
+
|
| 133 |
+
2) Continuous interrelationship and exchange of information in this area is necessary between ITU-T SG 4 and SG 2. In fact many Recommendations of E-Series describe QOS and NP concepts, parameters and methods for their measurements and they also contain suggestions on how to establish Service Quality Agreements [14] and also Customer Satisfaction Point [13] between Telecommunications Operators.
|
| 134 |
+
|
| 135 |
+
## 3 Assessment of network performance from the point of view of maintenance
|
| 136 |
+
|
| 137 |
+
\*Network Performance (NP)\* is a statement of the performance of connection element or concatenation of connection elements employed to provide a service and it is defined and measured in terms of parameters which are meaningful to Network Providers for different purposes [16]. Furthermore, it is to be noted that NP is defined independently of terminal performance and customer's actions and it is also service independent in that it must be able to support all the services the particular network is required to transport.
|
| 138 |
+
|
| 139 |
+
The QOS experienced by a customer is a very broad concept and depends on a combination of factors some of which are not under the direct responsibility of maintenance staff, for example:
|
| 140 |
+
|
| 141 |
+
- calling and called customer behaviour (i.e. percentage of non-successful calls related to premature abandonment or not answered calls for various reasons such as ring tone no answer, busy tone received or subscriber busy, etc.);
|
| 142 |
+
- planning and provisioning of the network and whether sufficient network resources (i.e. circuits, switching equipment) are provided to meet the number of call attempts by customers (e.g. percentage of non-successful calls due to lack of trunks/circuits);
|
| 143 |
+
- the degree to which network management or any other control system or tool is employed.
|
| 144 |
+
|
| 145 |
+
It should be emphasized that the assessment of network performance is of primary importance to Network Providers for the “efficient maintenance” of their international telephone network [19].
|
| 146 |
+
|
| 147 |
+
Therefore, it is very important to assess the network performance through end-to-end measurements and to collect all results in order to activate any corrective maintenance action as needed to re-establish the level of performance as required.
|
| 148 |
+
|
| 149 |
+
From the point of view of Maintenance, the assessment of international telephone network performance involves a measurement of the capability of the overall network (end-to-end, i.e. international section plus two national sections), to establish a switched connection of good transmission quality whenever required.
|
| 150 |
+
|
| 151 |
+
The general reference model for overall (end-to-end) measurements is reported in Figure 1.
|
| 152 |
+
|
| 153 |
+

|
| 154 |
+
|
| 155 |
+
Diagram illustrating the reference model for overall (end-to-end) measurements. The diagram shows a Customer connected to a CTE (Customer's Terminal Equipment), which is connected to a National network (LE + TE). This is followed by an International network (ISC, IN, ISC) and another National network (TE + LE). The CTE on the other side is connected to another Customer. The entire network section between the two CTEs is labeled 'Network' and 'End-to-end path'.
|
| 156 |
+
|
| 157 |
+
Legend:
|
| 158 |
+
|
| 159 |
+
- CTE Customer's Terminal Equipment (e.g. telephone, data terminal, fax terminal, etc.)
|
| 160 |
+
- LE Local Exchange
|
| 161 |
+
- TE Transit Exchange
|
| 162 |
+
- ISC International Switching Centre
|
| 163 |
+
- IN International Network
|
| 164 |
+
|
| 165 |
+
Diagram of the reference model for overall (end-to-end) measurements. It shows a Customer connected to a CTE (Customer's Terminal Equipment), which is connected to a National network (LE + TE). This is followed by an International network (ISC, IN, ISC) and another National network (TE + LE). The CTE on the other side is connected to another Customer. The entire network section between the two CTEs is labeled 'Network' and 'End-to-end path'. A legend defines the abbreviations: CTE (Customer's Terminal Equipment), LE (Local Exchange), TE (Transit Exchange), ISC (International Switching Centre), and IN (International Network).
|
| 166 |
+
|
| 167 |
+
FIGURE 1/M.1230
|
| 168 |
+
Reference model for overall (end-to-end) measurements
|
| 169 |
+
|
| 170 |
+
## 4 Major NP parameters for end-to-end measurements
|
| 171 |
+
|
| 172 |
+
According to existing Recommendations, the parameters essential to objectively measure the Quality of Service as perceived by customers, may be categorized into two main areas [12]:
|
| 173 |
+
|
| 174 |
+
### a) *Call connectivity*
|
| 175 |
+
|
| 176 |
+
The essential parameters required to assess the connectivity quality are:
|
| 177 |
+
|
| 178 |
+
- Start Dial Signal Delay (SDSD);
|
| 179 |
+
- Call disposition (e.g. reasons for unsuccessful call completion, e.g. wrong number, unknown tone, congestion, etc.);
|
| 180 |
+
- Post Dialling Delay (PDD);
|
| 181 |
+
- Call Completion Rate [or Answer Seizure Ratio (ASR)].
|
| 182 |
+
|
| 183 |
+
Call failures are categorized as due to network faults, equipment failure and network congestion.
|
| 184 |
+
|
| 185 |
+
### b) *Transmission quality*
|
| 186 |
+
|
| 187 |
+
The essential parameters contributing to the transmission quality (call clarity) are:
|
| 188 |
+
|
| 189 |
+
- Transmission loss;
|
| 190 |
+
- Attenuation distortion;
|
| 191 |
+
- Total distortion;
|
| 192 |
+
- Group delay distortion;
|
| 193 |
+
- Idle channel noise;
|
| 194 |
+
- Impulsive noise;
|
| 195 |
+
- Round-trip delay;
|
| 196 |
+
- Echo;
|
| 197 |
+
- Clipping.
|
| 198 |
+
|
| 199 |
+
It is important to note that for compatibility between manufacturers and TOs, it is essential to have a common measurement methodology<sup>3)</sup>. This will ensure that measured results are comparable between TOs and thus it will improve their cooperation in all joint activities and also the quality of the telephone service as offered to mutual customers.
|
| 200 |
+
|
| 201 |
+
As examples of network parameters, a list of main parameters for voice and non-voice calls is given below. This is not an exhaustive list.
|
| 202 |
+
|
| 203 |
+
#### *Voice*
|
| 204 |
+
|
| 205 |
+
- Circuit loss;
|
| 206 |
+
- Circuit noise;
|
| 207 |
+
- Impulsive-noise;
|
| 208 |
+
- Cross-talk (unintelligible);
|
| 209 |
+
- Terminal balance;
|
| 210 |
+
- Echo, control devices, delay, loss, stability;
|
| 211 |
+
- Propagation time, digital processing;
|
| 212 |
+
- Impedance mismatch;
|
| 213 |
+
- Quantization, non-linear and attenuation distortions and bandwidth;
|
| 214 |
+
- Speech detectors parameters, switched loss clipping, interruptions, freeze-out, fading;
|
| 215 |
+
- Power loads on cables and carriers, leakage, imbalances.
|
| 216 |
+
|
| 217 |
+
---
|
| 218 |
+
|
| 219 |
+
<sup>3)</sup> This requires further study/definition.
|
| 220 |
+
|
| 221 |
+
#### *Non-voice*
|
| 222 |
+
|
| 223 |
+
- Impulsive-noise, frame slips, jitter, hits, drop-outs, distortion, circuit loss, cross-talk, interruptions;
|
| 224 |
+
- Burst errors;
|
| 225 |
+
- Echo;
|
| 226 |
+
- Delay;
|
| 227 |
+
- Out of synchronism;
|
| 228 |
+
- Noise;
|
| 229 |
+
- Group delay distortion.
|
| 230 |
+
|
| 231 |
+
## **5 Review of present methods for assessing overall (end-to-end) network performance**
|
| 232 |
+
|
| 233 |
+
At present the following methods of measuring international telephone networks are available.
|
| 234 |
+
|
| 235 |
+
### **5.1 Test calls methods (intrusive measurements)**
|
| 236 |
+
|
| 237 |
+
There are currently four types of test calls which can be carried out both manually or automatically to assess the functioning of international circuits, namely [4]:
|
| 238 |
+
|
| 239 |
+
#### a) *Type 1 test calls*
|
| 240 |
+
|
| 241 |
+
These test calls are conducted between two directly connected international centres to verify that the transmission and signalling performance on an international circuit of a given group are satisfactory.
|
| 242 |
+
|
| 243 |
+
#### b) *Type 2 test calls*
|
| 244 |
+
|
| 245 |
+
These test calls are conducted between two international centres not directly connected to verify transit operational facilities of an intermediate international centre.
|
| 246 |
+
|
| 247 |
+
#### c) *Type 3 test calls*
|
| 248 |
+
|
| 249 |
+
These test calls are conducted from an international centre to a subscriber type number in the national network of the distant country (in general as a result of a particular kind of fault).
|
| 250 |
+
|
| 251 |
+
#### d) *Subscriber-to-subscriber type test calls*
|
| 252 |
+
|
| 253 |
+
These type of test calls are conducted with test equipment having the characteristics of an average subscriber line in one national network to similar equipment in the national network of a distant country.
|
| 254 |
+
|
| 255 |
+
The main existing Recommendations that describe subscriber-to-subscriber end-to-end measurements are:
|
| 256 |
+
|
| 257 |
+
- **Recommendation M.1235 – “Use of automatically generated test calls for assessment of network performance” [20]**
|
| 258 |
+
|
| 259 |
+
This Recommendation describes the use of automatic subscriber-to-subscriber test calls performed either in system-independent test call generators and test call responders, or by built-in facilities performing the same functions. Call-through testing as described in this Recommendation, can be used to check the performance on routes, circuits, switches and associated equipment. It should be noted that these test calls programmes should be carried out both during non-busy and busy periods and they have to be carefully planned. This means they have to be agreed between TOs concerned in order to avoid any kind of interference by a contemporaneous use of the same test number for other utilization. In this Recommendation are also defined the criteria for the choice of the number of test calls to be generated towards each switched destination and as it is stated, this number is mainly dependent on the frequency of difficulties encountered towards a certain destination (i.e. fewer test calls are needed to identify the network performance level when the rate of difficulties encountered is high).
|
| 260 |
+
|
| 261 |
+
- **Recommendation E.434 – “Subscriber-to-subscriber measurements of the public switched telephone network” [12]**
|
| 262 |
+
|
| 263 |
+
This Recommendation defines the methods and processes for testing, the measurements required, the elements of an end-to-end system and the operation of an end-to-end system, and it also contains Recommendations to define interfaces and protocols.
|
| 264 |
+
|
| 265 |
+
It is to be noted that also in this Recommendation the number of test calls depends on the parameters to be measured and the desired accuracy for those parameters. Further the number of test calls should be large enough to provide statistically valid results within the desired accuracy for each parameter measured, and small enough to allow the data to be collected over a fairly short period of time. Particular consideration should be given to trunk size of traffic volumes on the route when test call quantities are being determined.
|
| 266 |
+
|
| 267 |
+
Another consideration (limitation), is to keep the best period for measurements relatively short to ensure the availability of the test device, and therefore to avoid conflicts that might result in the use of responders. It is important to observe that “such conflicts” could also have an impact on the accuracy of results as test calls may have failed to complete because the terminating responder was in use for a different test programme rather than a real network failure.
|
| 268 |
+
|
| 269 |
+
In conclusion, also this method requires careful coordination and scheduling for test calls programmes between the TOs concerned.
|
| 270 |
+
|
| 271 |
+
### **5.2 Service Quality observations (non-intrusive measurements)**
|
| 272 |
+
|
| 273 |
+
Another way of supervising the total through connection capabilities of the network is to make Service Quality observations. The definition of “Service observation” [2] is the following: “Monitoring to obtain a complete or partial assessment of the quality of telephone calls, excluding test call”.
|
| 274 |
+
|
| 275 |
+
There are three methods to perform service observations:
|
| 276 |
+
|
| 277 |
+
- Manual observations – This is the monitoring of telephone calls by an observer without using any automatic data-recording machine.
|
| 278 |
+
|
| 279 |
+
This method provides all the data required in specific tables, namely: Table 1/E.422 [3] and Table 1/E.423 [4]. With this method, observations can be carried out with a minimum of equipment. Furthermore observations can allow the detection of a number of abnormalities that cannot be detected automatically (e.g. very poor speech transmission, or difficulty with audible tones).
|
| 280 |
+
|
| 281 |
+
- Semi-automatic observations – This is the monitoring of telephone calls using equipment that records some data automatically (e.g. equipment such as exchange, in which information being observed, number dialled by the subscriber, metering pulses and time of call, is recorded automatically on some means suitable for data processing).
|
| 282 |
+
|
| 283 |
+
This method also provides all data required in Tables 1/E.422 and 1/E.423, but a greater accuracy compared with manual observation is possible because there is an automatic recording of the number dialled, the time of the call, etc. In addition, it is possible for the observer to devote greater attention to the more critical conditions being checked during observations of calls.
|
| 284 |
+
|
| 285 |
+
- Automatic observations – This is the monitoring of telephone calls without an observer.
|
| 286 |
+
|
| 287 |
+
This method allows: continuous observation, a larger sample, to process data automatically, etc.
|
| 288 |
+
|
| 289 |
+
There are two types of automatic observations:
|
| 290 |
+
|
| 291 |
+
- Internal automatic observations that can be made in the switching centre itself (on the incoming side or the outgoing side or in between).
|
| 292 |
+
|
| 293 |
+
Main considerations of this method are: Only line signalling, such a seizure, answer, etc. can be monitored and also register signals as long as they do not pass through the exchange in an end-to-end signalling procedure; signals received are monitored if the exchange itself operates correctly in that respect and this also applies to the outgoing signal.
|
| 294 |
+
|
| 295 |
+
This observation technique is described in Recommendation E.425 [6], where it is underlined that its major advantage is that a large volume of call records can be collected and because a large volume of data can be obtained, this allows a day-to-day evaluation of Network Performance. The type of data collected can be related to effective network problems and calling and called subscriber behaviour [Call Failure Code Analysis (CFCA)]. Nowadays, the usefulness of such CFCA for CCSS No. 7 analysis is more and more increasing in line with the worldwide introduction of CCSS No. 7 in the national and international networks. It is to be noted that daily analysis of this information is of great importance in trouble detection, and coupled with a good maintenance response, it represents a powerful means to provide the best quality of service. The disadvantage is that this method does not have the capability of detecting tones or speech and therefore cannot present a complete representation of all call dispositions. To overcome this disadvantage it is recommended to use this method with Recommendation E.422.
|
| 296 |
+
|
| 297 |
+
- ii) External automatic observations that are made by means of monitoring equipment that is supervising the traffic on incoming and outgoing lines. With this technique all signalling signals can be monitored, the detection of tones, speech and data is possible if advanced equipment is used. It also provides the data required in Tables 2/E.422 and 2/E.423 and as its application is very flexible it can be used instead of manual or semi-automatic observation techniques.
|
| 298 |
+
|
| 299 |
+
### **5.3 Considerations of the methods of network performance assessment**
|
| 300 |
+
|
| 301 |
+
The attention of the TOs is drawn to the following:
|
| 302 |
+
|
| 303 |
+
- 1) The above methods are not exclusive. The nature of information obtained (e.g. verification of call completion rate, transmission quality, influence of international and national sections) will depend on the method of Network Performance assessment employed.
|
| 304 |
+
- 2) While there is a recognized need to continuously assess the performance of the international telephone network, the actual method by which this is achieved depends upon the arrangements within and between TOs and on the switching technology employed.
|
| 305 |
+
- 3) The choice of methods is left to individual TOs, to decide on the basis of their own particular circumstances. Information obtained (e.g. verification of call completion rate, transmission quality, influence of international and national sections) will depend on the method of Network Performance assessment.
|
| 306 |
+
|
| 307 |
+
## **6 General method for the optimization of the Operations and Maintenance (O&M) processes**
|
| 308 |
+
|
| 309 |
+
Against the background of present network developments, the major aim of a TO is to move towards the implementation of integrated telecommunications and relevant management systems in order to properly manage the level of network performance and Quality of Service and optimizing the related costs for all the processes involved.
|
| 310 |
+
|
| 311 |
+
This is very important for the overall O&M process where the performance of each constituent part is to be carefully handled in order to ensure efficiency and effectiveness of all resources (systems, personnel, internal organization, etc.) involved in the process.
|
| 312 |
+
|
| 313 |
+
For example in the “maintenance” process the resources are represented by both the network and human resources. For the network the major components are: type and technological implementation of network elements (i.e. transmission and switching facilities, supervisory and measuring equipment). For human aspects the major components are: the staffing sufficiency and the skill levels.
|
| 314 |
+
|
| 315 |
+
Thus for the O&M process it is necessary to:
|
| 316 |
+
|
| 317 |
+
- 1) Manage the Network Performance (and then the QOS) level through the knowledge of the standards of different call connectivity and transmission quality parameters as measured utilizing one or a combination of the previous methods of network performance assessment as described in Clause 5.
|
| 318 |
+
|
| 319 |
+
- 2) Manage the Operation and Maintenance performance through the knowledge of relevant appropriate parameters; for example the billing error ratio [11], the failure rate, the Mean Time to Repair (MTTR), the Service provisioning rate, the Directory response ratio, etc. [17], [18], [21].
|
| 320 |
+
- 3) To define and utilize an overall index CDI (Context Difficulty Index) which represents the difficulty levels (i.e. the non-performance) for all processes/components involved in the O&M environment. An example of a CDI related to a particular “Transmission environment” is attached to this Recommendation as Annex A, where the most CDI significant components are defined and also its computations are shown.
|
| 321 |
+
|
| 322 |
+
It is important to note that NP (QOS) varies inversely with CDI, e.g.:
|
| 323 |
+
|
| 324 |
+
- when the environment is good (CDI low), NP (QOS) is high;
|
| 325 |
+
- when the environment is bad (CDI high), NP (QOS) is low.
|
| 326 |
+
|
| 327 |
+
If the management capability of all components involved are comparable, the relationship of NP (QOS) and CDI is on the performance indifference curve as shown in Figure 2. However, there are some abnormal cases such as Group A and Group C. In Group A, the environment is bad (CDI high), but its NP (QOS) is high. This may be explained by the fact that the management capability of different components concerned is excellent. In Group C, the environment is good, but their NP (QOS) is low. Therefore, these components appear to have problems in the management procedures, or there could be other reasons for low performance.
|
| 328 |
+
|
| 329 |
+

|
| 330 |
+
|
| 331 |
+
H
|
| 332 |
+
↑
|
| 333 |
+
Group D
|
| 334 |
+
(+ +)
|
| 335 |
+
(+ +)
|
| 336 |
+
(+ +)
|
| 337 |
+
(+ +)
|
| 338 |
+
Group A
|
| 339 |
+
(+ +)
|
| 340 |
+
(+ +)
|
| 341 |
+
(+ +)
|
| 342 |
+
QOS\* or NP\*
|
| 343 |
+
-----
|
| 344 |
+
(+)
|
| 345 |
+
(+)
|
| 346 |
+
(+)
|
| 347 |
+
Group C
|
| 348 |
+
(+)
|
| 349 |
+
(+)
|
| 350 |
+
(+)
|
| 351 |
+
L
|
| 352 |
+
↓
|
| 353 |
+
L CDI\* H
|
| 354 |
+
→
|
| 355 |
+
Group B
|
| 356 |
+
(+ +)
|
| 357 |
+
(+ +)
|
| 358 |
+
(+ +)
|
| 359 |
+
Performance indifference curve
|
| 360 |
+
T0405870-95/d02
|
| 361 |
+
|
| 362 |
+
QOS\* QOS standard value
|
| 363 |
+
NP\* NP standard value
|
| 364 |
+
CDI\* CDI standard value
|
| 365 |
+
|
| 366 |
+
Figure 2/M.1230: Management model for performance. A graph showing the relationship between Context Difficulty Index (CDI) on the x-axis and Quality of Service (QOS) or Non-Performance (NP) on the y-axis. A downward-sloping 'Performance indifference curve' represents the expected relationship. Four groups are plotted: Group A (high CDI, high QOS/NP), Group B (high CDI, low QOS/NP), Group C (low CDI, low QOS/NP), and Group D (low CDI, high QOS/NP). Arrows point from Groups A and C towards Group D, indicating a goal for management. Standard values QOS\*, NP\*, and CDI\* are marked on the axes.
|
| 367 |
+
|
| 368 |
+
FIGURE 2/M.1230
|
| 369 |
+
Management model for performance
|
| 370 |
+
|
| 371 |
+
It is clear that the best choice for TOs is to keep all the involved components in Group D, where the environment is good (CDI low) and NP (QOS) is high.
|
| 372 |
+
|
| 373 |
+
As an example to achieve the aforesaid goals, the NP (QOS) and CDI relationship should be used to determine O&M budgets and relevant actions should be taken as follows:
|
| 374 |
+
|
| 375 |
+
- 1) *Group A* – Even though the CDI is high, the NP (QOS) is high. Thus incentives should be given to the managers of these components, and O&M budgets should be assigned with high priority to improve their environment. With these relevant actions, it is possible to provide positive motivations to other components which have high CDI.
|
| 376 |
+
- 2) *Group B* – They are in the performance indifference curve, but below the NP (QOS) standard value NP\* (QOS\*). Therefore, additional budgets should be assigned to improve the NP (QOS) and CDI. With continuous supports, NP (QOS) and CDI should be improved above their standard values.
|
| 377 |
+
- 3) *Group C* – NP (QOS) is low even though the CDI is low. In this case relevant actions should be taken not by budget assignment but by management consulting to find reasons for low performance. Their NP (QOS) should be improved above standard value with proper activities.
|
| 378 |
+
- 4) *Group D* – These are ideal cases. With continuous support, it is essential to keep the NP (QOS) and CDI of these components above the standard values.
|
| 379 |
+
|
| 380 |
+
## Annex A
|
| 381 |
+
|
| 382 |
+
### Example of Context Difficulty Index (CDI) in an O&M environment where transmission aspects are predominant (This Annex forms an integral part of this Recommendation)
|
| 383 |
+
|
| 384 |
+
In this “transmission environment” the following four significant factors are identified:
|
| 385 |
+
|
| 386 |
+
- i) *Feeder cable ratio* – “Percentage of non-feeder cable to the percentage of feeder cable uninstalled area”.
|
| 387 |
+
- ii) *Cable buried ratio* – “Percentage of buried cable from the total cable”.
|
| 388 |
+
- iii) *Staffing insufficiency level* – The lack of personnel from its assigned number.
|
| 389 |
+
- iv) *Facility-obsolete level* – The level of obsolescence for key facilities.
|
| 390 |
+
|
| 391 |
+
When the CDI value is high, it represents that the O&M environment is not good.
|
| 392 |
+
|
| 393 |
+
These four factors can be selected, as they are important and common problems and their relevant data could be easily collected. CDI values can be calculated as reported in the following computation method.
|
| 394 |
+
|
| 395 |
+
### Four CDI component index:
|
| 396 |
+
|
| 397 |
+
- | | | | | | |
|
| 398 |
+
|----|----------------------------------------------------------------------------------------------------------|----|---|------------------------------|------------|
|
| 399 |
+
| 1) | Feeder cable ratio | X1 | → | Feeder cable index | Y1 = F(X1) |
|
| 400 |
+
| 2) | Cable buried ratio | X2 | → | Cable buried index | Y2 = F(X2) |
|
| 401 |
+
| 3) | Staffing insufficiency level | X3 | → | Staffing insufficiency index | Y3 = F(X3) |
|
| 402 |
+
| 4) | Facility obsolete level | X4 | → | Facility obsolete index | Y4 = F(X4) |
|
| 403 |
+
| F | Transform context difficulty component values into an index which has a range <sup>4)</sup> from 1 to 5. | | | | |
|
| 404 |
+
|
| 405 |
+
### CDI computation:
|
| 406 |
+
|
| 407 |
+
$$CDI = (Y1 + Y2 + Y3 + Y4)/4$$
|
| 408 |
+
|
| 409 |
+
---
|
| 410 |
+
|
| 411 |
+
4) For each central office as involved in this example, values of context difficulty components were computed. Then central offices were classified into five different ranges according to these values. The offices with the best environment are assigned with index 1 and the poorest are assigned index 5. Thus, if CDI is high, their O&M environment is poor, if CDI is low, their O&M environment is good.
|
| 412 |
+
|
| 413 |
+
## References
|
| 414 |
+
|
| 415 |
+
- [1] CCITT Recommendation E.420 (1988), *Checking the quality of the international telephone service – General considerations.*
|
| 416 |
+
- [2] CCITT Recommendation E.421 (1988), *Service quality observations on a statistical basis.*
|
| 417 |
+
- [3] ITU-T Recommendation E.422 (1996), *Observations on international outgoing telephone calls for Quality of Service.*
|
| 418 |
+
- [4] CCITT Recommendation E.423 (1988), *Observations on traffic set up by operators.*
|
| 419 |
+
- [5] CCITT Recommendation E.424 (1992), *Test calls.*
|
| 420 |
+
- [6] CCITT Recommendation E.425 (1992), *Internal automatic observations.*
|
| 421 |
+
- [7] CCITT Recommendation E.426 (1992), *General guide to the percentage of effective attempts which should be observed for international telephone calls.*
|
| 422 |
+
- [8] CCITT Recommendation E.428 (1992), *Connection retention.*
|
| 423 |
+
- [9] CCITT Recommendation E.431 (1992), *Service quality assessment for connection set-up and release delays.*
|
| 424 |
+
- [10] CCITT Recommendation E.432 (1992), *Connection quality.*
|
| 425 |
+
- [11] CCITT Recommendation E.433 (1992), *Billing integrity.*
|
| 426 |
+
- [12] CCITT Recommendation E.434 (1992), *Subscriber-to-subscriber measurement of public switched telephone network*
|
| 427 |
+
- [13] ITU-T Recommendation E.440 (1996), *Customer satisfaction point.*
|
| 428 |
+
- [14] ITU-T Recommendation E.801 (1996), *Framework for Service Quality Agreement (SQA).*
|
| 429 |
+
- [15] ITU-T Recommendation E.600 (1993), *Terms and definitions of traffic engineering.*
|
| 430 |
+
- [16] ITU-T Recommendation E.800 (1994), *Terms and definitions related to Quality of Service and network performance including dependability.*
|
| 431 |
+
- [17] ITU-T Recommendation M.60 (1993), *Maintenance terminology and definitions.*
|
| 432 |
+
- [18] CCITT Recommendation M.21 (1992), *Maintenance philosophy for telecommunication services.*
|
| 433 |
+
- [19] CCITT Recommendation M.730 (1988), *Maintenance methods.*
|
| 434 |
+
- [20] CCITT Recommendation M.1235 (1988), *Use of automatically generated test calls for assessment of network performance.*
|
| 435 |
+
- [21] CCITT Recommendation M.20 (1992), *Maintenance philosophy for telecommunication networks.*
|
| 436 |
+
|
| 437 |
+
## ITU-T RECOMMENDATIONS SERIES
|
| 438 |
+
|
| 439 |
+
| | |
|
| 440 |
+
|-----------------|-----------------------------------------------------------------------------------------------------------------------|
|
| 441 |
+
| Series A | Organization of the work of the ITU-T |
|
| 442 |
+
| Series B | Means of expression |
|
| 443 |
+
| Series C | General telecommunication statistics |
|
| 444 |
+
| Series D | General tariff principles |
|
| 445 |
+
| Series E | Telephone network and ISDN |
|
| 446 |
+
| Series F | Non-telephone telecommunication services |
|
| 447 |
+
| Series G | Transmission systems and media |
|
| 448 |
+
| Series H | Transmission of non-telephone signals |
|
| 449 |
+
| Series I | Integrated services digital network |
|
| 450 |
+
| Series J | Transmission of sound-programme and television signals |
|
| 451 |
+
| Series K | Protection against interference |
|
| 452 |
+
| Series L | Construction, installation and protection of cables and other elements of outside plant |
|
| 453 |
+
| <b>Series M</b> | <b>Maintenance: international transmission systems, telephone circuits, telegraphy, facsimile and leased circuits</b> |
|
| 454 |
+
| Series N | Maintenance: international sound-programme and television transmission circuits |
|
| 455 |
+
| Series O | Specifications of measuring equipment |
|
| 456 |
+
| Series P | Telephone transmission quality |
|
| 457 |
+
| Series Q | Switching and signalling |
|
| 458 |
+
| Series R | Telegraph transmission |
|
| 459 |
+
| Series S | Telegraph services terminal equipment |
|
| 460 |
+
| Series T | Terminal equipments and protocols for telematic services |
|
| 461 |
+
| Series U | Telegraph switching |
|
| 462 |
+
| Series V | Data communication over the telephone network |
|
| 463 |
+
| Series X | Data networks and open system communication |
|
| 464 |
+
| Series Z | Programming languages |
|
marked/M/T-REC-M.1235-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.125-198811-I_PDF-E/191a4a245a7d36d03be9a990d0f758f5_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.125-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.125-198811-I_PDF-E/aa81b9b80bd1e3d723922b3a033564a2_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.125-198811-I_PDF-E/d62e2e2281009c16f4ee61660e716cd9_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.125-198811-I_PDF-E/d980a3f9608055996a07f31788baf827_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.125-198811-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,203 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
The logo of the International Telecommunication Union (ITU) features a globe with a lightning bolt superimposed on it, and the letters 'ITU' in a bold, sans-serif font.
|
| 6 |
+
|
| 7 |
+
ITU logo
|
| 8 |
+
|
| 9 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 10 |
+
|
| 11 |
+
**ITU-T**
|
| 12 |
+
|
| 13 |
+
**M.125**
|
| 14 |
+
|
| 15 |
+
TELECOMMUNICATION
|
| 16 |
+
STANDARDIZATION SECTOR
|
| 17 |
+
OF ITU
|
| 18 |
+
|
| 19 |
+
**MAINTENANCE :
|
| 20 |
+
INTRODUCTION AND GENERAL PRINCIPLES**
|
| 21 |
+
|
| 22 |
+
---
|
| 23 |
+
|
| 24 |
+
**DIGITAL LOOPBACK MECHANISMS**
|
| 25 |
+
|
| 26 |
+
**ITU-T Recommendation M.125**
|
| 27 |
+
|
| 28 |
+
(Extract from the *Blue Book*)
|
| 29 |
+
|
| 30 |
+
---
|
| 31 |
+
|
| 32 |
+
# NOTES
|
| 33 |
+
|
| 34 |
+
1 ITU-T Recommendation M.125 was published in Fascicle IV.1 of the *Blue Book*. This file is an extract from the *Blue Book*. While the presentation and layout of the text might be slightly different from the *Blue Book* version, the contents of the file are identical to the *Blue Book* version and copyright conditions remain unchanged (see below).
|
| 35 |
+
|
| 36 |
+
2 In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 37 |
+
|
| 38 |
+
# DIGITAL LOOPBACK MECHANISMS
|
| 39 |
+
|
| 40 |
+
## 1 General
|
| 41 |
+
|
| 42 |
+
Loopback can be one of the mechanisms which may be applied to fault localization and failure detection. This Recommendation provides digital loopback definitions and describes loopback applications related to the maintenance phases of Recommendation M.20.
|
| 43 |
+
|
| 44 |
+
## 2 Digital loopback definitions
|
| 45 |
+
|
| 46 |
+
A **digital loopback** is a mechanism incorporated into a piece of equipment whereby a bidirectional communication path may be connected back upon itself so that some or all of the information contained in the bit stream sent on the transmit path is returned on the receive path.
|
| 47 |
+
|
| 48 |
+
The **loopback point** is the location of the loopback.
|
| 49 |
+
|
| 50 |
+
The **loopback control mechanism** is the means by which the loopback is operated and released from the loopback control point.
|
| 51 |
+
|
| 52 |
+
The **loopback control point** is the point which has the ability to directly control loopbacks.
|
| 53 |
+
|
| 54 |
+
The loopback control point may receive requests for loopback operation from several loopback requesting points.
|
| 55 |
+
|
| 56 |
+
The **loopback requesting point** is the point which requests the loopback control point to operate loopbacks.
|
| 57 |
+
|
| 58 |
+
*Note 1* – Loopback requests should be subject to identification and authorization.
|
| 59 |
+
|
| 60 |
+
*Note 2* – Possible locations of loopback requesting points are: the network, or a telecommunications management network (TMN), or a maintenance service provider (MSP).
|
| 61 |
+
|
| 62 |
+
The **loopback test pattern** is the test information transmitted during the operation of the loopback in the channel or channels which are to be redirected by the loopback.
|
| 63 |
+
|
| 64 |
+
*Note 1* – The generation of the test pattern used over the loopback may or may not take place at the control point.
|
| 65 |
+
|
| 66 |
+
The **loopback application** is the maintenance phase for which the loopback operation is used, as defined in Recommendation M.20.
|
| 67 |
+
|
| 68 |
+
### 2.1 Loopback types
|
| 69 |
+
|
| 70 |
+
The following three types of loopback mechanisms are defined:
|
| 71 |
+
|
| 72 |
+
- a) **complete loopback** – A complete loopback is a physical layer [1] mechanism which operates on the full bit stream. At the loopback point, the received bit stream shall be transmitted back towards the transmitting station without modification.
|
| 73 |
+
|
| 74 |
+
*Note* – The use of the term “complete loopback” is not related to implementation since such a loopback may be provided by means of active logic elements or controlled unbalance of hybrid transformer, etc. At the control point only the information channels may be available.
|
| 75 |
+
|
| 76 |
+
- b) **partial loopback** – A partial loopback is a physical layer [1] mechanism which operates on one or more specified channels multiplexed within the full bit stream. At the loopback point, the received bit stream associated with the specified channel(s) shall be transmitted back towards the transmitting station without modification.
|
| 77 |
+
- c) **logical loopback** – A logical loopback acts selectively on certain information within a specified channel or channels and may result in some specified modification of the looped information. Logical loopbacks may be defined to apply at any layer [1], depending on the detailed maintenance procedures specified.
|
| 78 |
+
|
| 79 |
+
For each of the above three types of loopback mechanisms, the loopback may be further categorized as either transparent or non-transparent:
|
| 80 |
+
|
| 81 |
+
- i) A **transparent loopback** is one in which the signal transmitted beyond the loopback point (the forward signal) when the loopback is activated, is the same as the received signal at the loopback point. See Figure 1 a)/M.125.
|
| 82 |
+
- ii) A **non-transparent loopback** is one in which the signal transmitted beyond the loopback point (the forward signal) when the loopback is activated is not the same as the received signal at the loopback point. The forward signal may be defined signal or unspecified. See Figure 1 b)/M.125.
|
| 83 |
+
|
| 84 |
+
*Note* – Whether or not a transparent loopback is used, the loopback should not be affected by facilities connected beyond the point at which the loop is provided, e.g., by the presence of short circuits, open circuits or foreign voltages.
|
| 85 |
+
|
| 86 |
+
Annex A to this Recommendation shows some examples of loopbacks.
|
| 87 |
+
|
| 88 |
+

|
| 89 |
+
|
| 90 |
+
The diagram consists of two parts, (a) and (b), illustrating different loopback mechanisms. Both diagrams show a signal path with a loopback point indicated by a vertical dashed line. In part (a), labeled 'a) Transparent loopback', the signal is looped back at the loopback point. A label 'Transparent, complete loopback' points to the loop, with a sub-note '(Complete loopback of full bit stream, transparent with regard to bit stream in forward direction.)'. In part (b), labeled 'b) Non-transparent loopback', the signal is looped back at the loopback point, but there is a device labeled 'L1' in the forward path before the loopback point. A label 'Non-transparent, complete loopback' points to the loop, with a sub-note '(Complete loopback of full bit stream, non-transparent with regard to bit stream in forward direction.)'. Both diagrams include an 'X' on the forward path before the loopback point, with a note 'X = Signal inhibited in order to avoid interference with looped signal'. A reference code 'T0401150-88' is present near the bottom of part (b).
|
| 91 |
+
|
| 92 |
+
Loopback point
|
| 93 |
+
|
| 94 |
+
Transparent, complete loopback
|
| 95 |
+
(Complete loopback of full bit stream, transparent with regard to bit stream in forward direction.)
|
| 96 |
+
|
| 97 |
+
X = Signal inhibited in order to avoid interference with looped signal
|
| 98 |
+
|
| 99 |
+
a) Transparent loopback
|
| 100 |
+
|
| 101 |
+
Loopback point
|
| 102 |
+
|
| 103 |
+
Non-transparent, complete loopback
|
| 104 |
+
(Complete loopback of full bit stream, non-transparent with regard to bit stream in forward direction.)
|
| 105 |
+
|
| 106 |
+
T0401150-88
|
| 107 |
+
|
| 108 |
+
X = Signal inhibited in order to avoid interference with looped signal
|
| 109 |
+
|
| 110 |
+
L1 = Device which changes or inhibits the transferred signal
|
| 111 |
+
|
| 112 |
+
b) Non-transparent loopback
|
| 113 |
+
|
| 114 |
+
d01-sc
|
| 115 |
+
|
| 116 |
+
Diagrams of transparent and non-transparent loopback mechanisms.
|
| 117 |
+
|
| 118 |
+
FIGURE 1/M.125
|
| 119 |
+
|
| 120 |
+
## 3 Loopback applications
|
| 121 |
+
|
| 122 |
+
### 3.1 Failure detection
|
| 123 |
+
|
| 124 |
+
In order to detect failures related to networks maintained by different maintenance organizations, loopbacks should be applied at the borderline separating the maintenance responsibilities. Loopbacks should be located in the maintenance entities (ME) adjacent to the borderline and as close as possible to the borderline. Part of the bit stream can be involved in failure detection. Figure 2/M.125 shows an example with failure detection originated in locations A and B.
|
| 125 |
+
|
| 126 |
+

|
| 127 |
+
|
| 128 |
+
The diagram shows two maintenance organizations, A and B, separated by a vertical dashed borderline. Maintenance organization A has three Maintenance Entities (ME) in a row, and Maintenance organization B also has three MEs. A signal path goes from point A through the MEs of organization A, crosses the borderline, and continues through the MEs of organization B to point B. In the last ME of organization A (closest to the border), there is a loopback arrow pointing from the forward path back to the return path. Similarly, in the first ME of organization B (closest to the border), there is a loopback arrow pointing from the forward path back to the return path. Labels include 'Maintenance organization A', 'Maintenance organization B', 'A', 'B', 'ME', 'T0400940-87', and 'd02-sc'.
|
| 129 |
+
|
| 130 |
+
Diagram of failure detection with loopbacks across two maintenance organizations.
|
| 131 |
+
|
| 132 |
+
FIGURE 2/M.125
|
| 133 |
+
|
| 134 |
+
#### Failure detection with loopbacks
|
| 135 |
+
|
| 136 |
+
### 3.2 Fault localization
|
| 137 |
+
|
| 138 |
+
The localization of faults in networks consisting of $n$ maintenance entities requires at least $n + 1$ loopback mechanisms. The loopback point should be as close as possible to the in- and output ports of the ME in order to include as much as possible of the ME in the loopback mechanism. (See example in Figure 3/M.125.) Part of the bit stream or the complete bit stream can be involved in fault localization, originated in locations A or B.
|
| 139 |
+
|
| 140 |
+

|
| 141 |
+
|
| 142 |
+
The diagram shows two parallel paths of Maintenance Entities (ME). The top path starts at point A and consists of three MEs, each with a loopback arrow pointing from the input side to the output side. The bottom path consists of three MEs ending at point B, each also with a loopback arrow pointing from the input side to the output side. Labels include 'A', 'B', 'ME', 'T0400950-87', and 'd03-sc'.
|
| 143 |
+
|
| 144 |
+
Diagram of fault localization with loopback mechanisms.
|
| 145 |
+
|
| 146 |
+
FIGURE 3/M.125
|
| 147 |
+
|
| 148 |
+
#### Fault localization with loopback mechanisms
|
| 149 |
+
|
| 150 |
+
### 3.3 Verification
|
| 151 |
+
|
| 152 |
+
Verification can require performance tests and measurements of the complete bit stream.
|
| 153 |
+
|
| 154 |
+
The same loopback location can be used as for fault localization.
|
| 155 |
+
|
| 156 |
+
## 4 Loopback operation and release
|
| 157 |
+
|
| 158 |
+
Loopbacks can be operated/released locally or remotely. Remote operation/release can be based on in-service addressing (e.g., layer 1 protocols) or it can require separate loopbacks addressing systems.
|
| 159 |
+
|
| 160 |
+
## 5 Loopback examples (under study – see Annex A)
|
| 161 |
+
|
| 162 |
+
## ANNEX A (to Recommendation M.125)
|
| 163 |
+
|
| 164 |
+

|
| 165 |
+
|
| 166 |
+
Loopback part
|
| 167 |
+
|
| 168 |
+
Non-transparent, complete loopback
|
| 169 |
+
(Complete loopback of full bit stream, non-transparent with regard to bit stream in forward direction)
|
| 170 |
+
|
| 171 |
+
Transparent, complete loopback
|
| 172 |
+
(Complete loopback of full bit stream, transparent with regard to bit stream in forward direction)
|
| 173 |
+
|
| 174 |
+
Unlooped signal
|
| 175 |
+
Non-transparent, partial loopback
|
| 176 |
+
(Partial loopback of channel(s), non-transparent with regard to channel(s) in forward direction)
|
| 177 |
+
|
| 178 |
+
Unlooped signal
|
| 179 |
+
Transparent partial loopback
|
| 180 |
+
(Partial loopback of channel(s), transparent with regard to channel(s) in forward direction)
|
| 181 |
+
|
| 182 |
+
Unlooped signal
|
| 183 |
+
Non-transparent, logical loopback
|
| 184 |
+
(Logical loopback of part channel, non-transparent in respect to channel in forward direction)
|
| 185 |
+
|
| 186 |
+
Unlooped signal
|
| 187 |
+
Transparent, logical loopback
|
| 188 |
+
(Logical loopback of part of channel, transparent in respect to channel in forward direction)
|
| 189 |
+
|
| 190 |
+
L1 = Device which changes or inhibits the transferred signal
|
| 191 |
+
L2 = Device which changes the looped signal
|
| 192 |
+
X = (Part of) signal inhibited in order to avoid interference with looped signal.
|
| 193 |
+
|
| 194 |
+
T0400960-87 d04-sc
|
| 195 |
+
|
| 196 |
+
Diagram illustrating six types of loopbacks in a network element. Each type shows a signal path with devices L1 and L2, and inhibited signals marked with X. The types are: 1. Non-transparent, complete loopback; 2. Transparent, complete loopback; 3. Unlooped signal and Non-transparent, partial loopback; 4. Unlooped signal and Transparent partial loopback; 5. Unlooped signal and Non-transparent, logical loopback; 6. Unlooped signal and Transparent, logical loopback.
|
| 197 |
+
|
| 198 |
+
FIGURE A-1/M.125
|
| 199 |
+
Examples of loopbacks
|
| 200 |
+
|
| 201 |
+
## Reference
|
| 202 |
+
|
| 203 |
+
- [1] CCITT Recommendation *Reference model of open system interconnection for CCITT applications*, Vol. VIII, Recommendation X.200.
|
marked/M/T-REC-M.1300-199710-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,460 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
The logo of the International Telecommunication Union (ITU) features the letters 'ITU' in a bold, sans-serif font, superimposed on a stylized globe with intersecting lines.
|
| 6 |
+
|
| 7 |
+
ITU logo
|
| 8 |
+
|
| 9 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 10 |
+
|
| 11 |
+
**ITU-T**
|
| 12 |
+
|
| 13 |
+
TELECOMMUNICATION
|
| 14 |
+
STANDARDIZATION SECTOR
|
| 15 |
+
OF ITU
|
| 16 |
+
|
| 17 |
+
**M.1300**
|
| 18 |
+
|
| 19 |
+
(10/97)
|
| 20 |
+
|
| 21 |
+
SERIES M: TMN AND NETWORK MAINTENANCE:
|
| 22 |
+
INTERNATIONAL TRANSMISSION SYSTEMS,
|
| 23 |
+
TELEPHONE CIRCUITS, TELEGRAPHY, FACSIMILE
|
| 24 |
+
AND LEASED CIRCUITS
|
| 25 |
+
|
| 26 |
+
International data transmission systems
|
| 27 |
+
|
| 28 |
+
---
|
| 29 |
+
|
| 30 |
+
**Maintenance of international data transmission
|
| 31 |
+
systems operating in the range 2.4 kbit/s to
|
| 32 |
+
140 Mbit/s**
|
| 33 |
+
|
| 34 |
+
ITU-T Recommendation M.1300
|
| 35 |
+
|
| 36 |
+
(Previously CCITT Recommendation)
|
| 37 |
+
|
| 38 |
+
---
|
| 39 |
+
|
| 40 |
+
# ITU-T M-SERIES RECOMMENDATIONS
|
| 41 |
+
|
| 42 |
+
## **TMN AND NETWORK MAINTENANCE: INTERNATIONAL TRANSMISSION SYSTEMS, TELEPHONE CIRCUITS, TELEGRAPHY, FACSIMILE AND LEASED CIRCUITS**
|
| 43 |
+
|
| 44 |
+
| | |
|
| 45 |
+
|---------------------------------------------------------------------------------|----------------------|
|
| 46 |
+
| Introduction and general principles of maintenance and maintenance organization | M.10–M.299 |
|
| 47 |
+
| International transmission systems | M.300–M.559 |
|
| 48 |
+
| International telephone circuits | M.560–M.759 |
|
| 49 |
+
| Common channel signalling systems | M.760–M.799 |
|
| 50 |
+
| International telegraph systems and phototelegraph transmission | M.800–M.899 |
|
| 51 |
+
| International leased group and supergroup links | M.900–M.999 |
|
| 52 |
+
| International leased circuits | M.1000–M.1099 |
|
| 53 |
+
| Mobile telecommunication systems and services | M.1100–M.1199 |
|
| 54 |
+
| International public telephone network | M.1200–M.1299 |
|
| 55 |
+
| <b>International data transmission systems</b> | <b>M.1300–M.1399</b> |
|
| 56 |
+
| Designations and information exchange | M.1400–M.1999 |
|
| 57 |
+
| International transport network | M.2000–M.2999 |
|
| 58 |
+
| Telecommunications management network | M.3000–M.3599 |
|
| 59 |
+
| Integrated services digital networks | M.3600–M.3999 |
|
| 60 |
+
| Common channel signalling systems | M.4000–M.4999 |
|
| 61 |
+
|
| 62 |
+
*For further details, please refer to ITU-T List of Recommendations.*
|
| 63 |
+
|
| 64 |
+
## **ITU-T RECOMMENDATION M.1300**
|
| 65 |
+
|
| 66 |
+
## **MAINTENANCE OF INTERNATIONAL DATA TRANSMISSION SYSTEMS OPERATING IN THE RANGE 2.4 kbit/s TO 140 Mbit/s**
|
| 67 |
+
|
| 68 |
+
## **Summary**
|
| 69 |
+
|
| 70 |
+
This Recommendation provides a general description of international data transmission systems with a PDH presentation to the renter and of the basic requirements for their effective operation.
|
| 71 |
+
|
| 72 |
+
## **Source**
|
| 73 |
+
|
| 74 |
+
ITU-T Recommendation M.1300 was revised by ITU-T Study Group 4 (1997-2000) and was approved under the WTSC Resolution No. 1 procedure on the 24th of October 1997.
|
| 75 |
+
|
| 76 |
+
## **Keywords**
|
| 77 |
+
|
| 78 |
+
International data transmission links, international data transmission systems, international leased circuits.
|
| 79 |
+
|
| 80 |
+
## FOREWORD
|
| 81 |
+
|
| 82 |
+
ITU (International Telecommunication Union) is the United Nations Specialized Agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of the ITU. The ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis.
|
| 83 |
+
|
| 84 |
+
The World Telecommunication Standardization Conference (WTSC), which meets every four years, establishes the topics for study by the ITU-T Study Groups which, in their turn, produce Recommendations on these topics.
|
| 85 |
+
|
| 86 |
+
The approval of Recommendations by the Members of the ITU-T is covered by the procedure laid down in WTSC Resolution No. 1.
|
| 87 |
+
|
| 88 |
+
In some areas of information technology which fall within ITU-T's purview, the necessary standards are prepared on a collaborative basis with ISO and IEC.
|
| 89 |
+
|
| 90 |
+
### NOTE
|
| 91 |
+
|
| 92 |
+
In this Recommendation, the expression "Administration" is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 93 |
+
|
| 94 |
+
## INTELLECTUAL PROPERTY RIGHTS
|
| 95 |
+
|
| 96 |
+
The ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. The ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process.
|
| 97 |
+
|
| 98 |
+
As of the date of approval of this Recommendation, the ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database.
|
| 99 |
+
|
| 100 |
+
© ITU 1998
|
| 101 |
+
|
| 102 |
+
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the ITU.
|
| 103 |
+
|
| 104 |
+
## CONTENTS
|
| 105 |
+
|
| 106 |
+
| | | <b>Page</b> |
|
| 107 |
+
|----|---------------------------------------------------------------------|-------------|
|
| 108 |
+
| 1 | Scope ..... | 1 |
|
| 109 |
+
| 2 | References ..... | 1 |
|
| 110 |
+
| 3 | Terminology and definitions ..... | 2 |
|
| 111 |
+
| 4 | Abbreviations ..... | 2 |
|
| 112 |
+
| 5 | Operational procedures..... | 3 |
|
| 113 |
+
| 6 | Performance limits ..... | 3 |
|
| 114 |
+
| 7 | General description of international data transmission systems..... | 3 |
|
| 115 |
+
| 8 | General description of international data transmission links ..... | 9 |
|
| 116 |
+
| 9 | Timing sources ..... | 11 |
|
| 117 |
+
| 10 | Control and sub-control stations ..... | 11 |
|
| 118 |
+
| 11 | Reserve arrangements..... | 11 |
|
| 119 |
+
| 12 | Designations ..... | 11 |
|
| 120 |
+
|
| 121 |
+
|
| 122 |
+
|
| 123 |
+
## Recommendation M.1300
|
| 124 |
+
|
| 125 |
+
## MAINTENANCE OF INTERNATIONAL DATA TRANSMISSION SYSTEMS OPERATING IN THE RANGE 2.4 kbit/s TO 140 Mbit/s
|
| 126 |
+
|
| 127 |
+
(Published 1984; revised 1988, 1992 and 1997)
|
| 128 |
+
|
| 129 |
+
## 1 Scope
|
| 130 |
+
|
| 131 |
+
This Recommendation defines international data transmission systems with a PDH presentation to the router. The international data transmission system is transported via an international data transmission link, which may typically be provided on a variety of transmission media using a number of network technologies.
|
| 132 |
+
|
| 133 |
+
## 2 References
|
| 134 |
+
|
| 135 |
+
The following ITU-T Recommendations contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations are subject to revision; all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations listed below. A list of the currently valid ITU-T Recommendations is regularly published.
|
| 136 |
+
|
| 137 |
+
- [1] CCITT Recommendation G.703 (1991), *Physical/electrical characteristics of hierarchical digital interfaces*.
|
| 138 |
+
- [2] ITU-T Recommendation G.704 (1995), *Synchronous frame structures used at 1544, 6312, 2048, 8448 and 44 736 kbit/s hierarchical levels*.
|
| 139 |
+
- [3] CCITT Recommendation G.732 (1988), *Characteristics of primary PCM multiplex equipment operating at 2048 kbit/s*.
|
| 140 |
+
- [4] ITU-T Recommendation G.736 (1993), *Characteristics of a synchronous digital multiplex equipment operating at 2048 kbit/s*.
|
| 141 |
+
- [5] CCITT Recommendation G.751 (1988), *Digital Multiplex equipments operating at the third order bit rate of 34 368 kbit/s and the fourth order bit rate of 139 624 kbit/s and using positive justification*.
|
| 142 |
+
- [6] CCITT Recommendation G.752 (1980), *Characteristics of digital multiplex equipments based on a second order bit rate of 6312 kbit/s and using positive justification*.
|
| 143 |
+
- [7] ITU-T Recommendation G.803 (1997), *Architectures of transport networks based on the Synchronous Digital Hierarchy (SDH)*.
|
| 144 |
+
- [8] ITU-T Recommendation G.811 (1997), *Timing characteristics of primary reference clocks*.
|
| 145 |
+
- [9] ITU-T Recommendation M.60 (1993), *Maintenance terminology and definitions*.
|
| 146 |
+
- [10] CCITT Recommendation M.1012 (1988), *Circuit control station for leased and special circuits*.
|
| 147 |
+
- [11] CCITT Recommendation M.1013 (1988), *Sub-control station for leased and special circuits*.
|
| 148 |
+
|
| 149 |
+
- [12] ITU-T Recommendation M.1340 (1996), *Performance allocations and limits for international data transmission links and systems.*
|
| 150 |
+
- [13] ITU-T Recommendation M.1370 (1993), *Bringing-into-service of international data transmission systems.*
|
| 151 |
+
- [14] ITU-T Recommendation M.1375 (1996), *Maintenance of international data transmission system.*
|
| 152 |
+
- [15] ITU-T Recommendation M.1380 (1997), *Bringing-into-service of international leased circuits that are supported by international data transmission systems.*
|
| 153 |
+
- [16] ITU-T Recommendation M.1385 (1993), *Maintenance of international leased circuits that are supported by international data transmission systems.*
|
| 154 |
+
- [17] ITU-T Recommendation M.1400 (1997), *Designations for international networks.*
|
| 155 |
+
- [18] ITU-T Recommendation V.11 (1996), *Electrical characteristics for balanced double-current interchange circuits operating at data signalling rates up to 10 Mbit/s.*
|
| 156 |
+
- [19] ITU-T Recommendation V.24 (1996), *List of definitions for interchange circuits between Data Terminal Equipment (DTE) and Data Circuit-terminating Equipment (DCE).*
|
| 157 |
+
- [20] ITU-T Recommendation V.28 (1993), *Electrical characteristics for unbalanced double-current interchange circuits.*
|
| 158 |
+
- [21] CCITT Recommendation X.21 (1992), *Interface between Data Terminal Equipment (DTE) and Data Circuit-terminating Equipment (DCE) for synchronous operation on public data networks.*
|
| 159 |
+
- [22] CCITT Recommendation X.50 (1988), *Fundamental parameters of a multiplexing scheme for the international interface between synchronous data networks.*
|
| 160 |
+
|
| 161 |
+
## 3 Terminology and definitions
|
| 162 |
+
|
| 163 |
+
Terminologies and definitions relating to this Recommendation are provided in Recommendation M.60 [9].
|
| 164 |
+
|
| 165 |
+
A data transmission system is a component of a digital transmission network, and is primarily used to support international leased circuits. These circuits can be used for a variety of services, including voice, data, video, etc.
|
| 166 |
+
|
| 167 |
+
## 4 Abbreviations
|
| 168 |
+
|
| 169 |
+
This Recommendation uses the following abbreviations.
|
| 170 |
+
|
| 171 |
+
| | |
|
| 172 |
+
|-----|----------------------------------|
|
| 173 |
+
| DNI | Digital Network Interface |
|
| 174 |
+
| FDM | Frequency Division Multiplexing |
|
| 175 |
+
| LTP | Link Terminating Point |
|
| 176 |
+
| MUX | Multiplexing Equipment |
|
| 177 |
+
| PDH | Plesiochronous Digital Hierarchy |
|
| 178 |
+
| RP | Renter's Premises |
|
| 179 |
+
| TDM | Time Division Multiplexing |
|
| 180 |
+
| TIC | Terminal International Centre |
|
| 181 |
+
|
| 182 |
+
## 5 Operational procedures
|
| 183 |
+
|
| 184 |
+
Recommendation M.1370 [13] covers the setting up and bringing-into-service of international data transmission systems. Maintenance issues are covered by Recommendation M.1375 [14].
|
| 185 |
+
|
| 186 |
+
The bringing-into-service and maintenance issues relating to international leased circuits with a digital presentation at renters' premises that are supported by international data transmission systems are covered by Recommendations M.1380 [15] and M.1385 [16], respectively.
|
| 187 |
+
|
| 188 |
+
## 6 Performance limits
|
| 189 |
+
|
| 190 |
+
Performance limits applicable to international data transmission systems and links are provided in Recommendation M.1340 [12].
|
| 191 |
+
|
| 192 |
+
## 7 General description of international data transmission systems
|
| 193 |
+
|
| 194 |
+
An international data transmission system is comprised of an international data transmission link combined with multiplexing equipment<sup>1</sup> at each end and is primarily used for the point-to-point transmission of international leased circuits (see Figure 1). Typical data rates of interest are: 2.4, 4.8, 7.2, 9.6, 14.4, 19.2, 48, 56, 64, $N \times 64$ ( $N = 2$ to 31), 1544, and 2048 kbit/s, 6, 8, 34, 45 and 140 Mbit/s. A system may be carried as a channel on a higher order system (see Figure 2a).
|
| 195 |
+
|
| 196 |
+
The international data transmission link that supports the aggregate transmission from the terminal multiplexing equipment of the international data transmission system will be presented via a digital interface that is referred to as the Link Terminating Point (LTP). Where an international data transmission link incorporates an analogue transmission path, the associated modems required to derive the digital interface are considered to be part of the link<sup>2</sup>.
|
| 197 |
+
|
| 198 |
+
In general, an international data transmission link can be divided into sectional components. The international link section is considered to exist between Terminal International Centres (TICs) and the national link section is considered to exist between a TIC and LTP, where the LTP could be located at numerous points, including Terminal National Centres (TNCs) or renters' premises<sup>3</sup>. Several typical configurations of an international data transmission system are shown in Figure 3. It should be noted that where an LTP exists at a TIC, no national link section will exist.
|
| 199 |
+
|
| 200 |
+
Exceptionally, an international data transmission system may not be routed via any Network Operator's/Service Provider's premises. Figure 3 d) shows an international data transmission system routed directly between renters' premises, e.g. via satellite.
|
| 201 |
+
|
| 202 |
+
An international data transmission system can support circuits with either analogue or digital presentations at the renter's premises. Typical uses include data, facsimile, voice, etc. (see Figure 4).
|
| 203 |
+
|
| 204 |
+
---
|
| 205 |
+
|
| 206 |
+
<sup>1</sup> The term multiplexing equipment, as defined in Recommendation M.60 [9], includes digital cross-connect equipment.
|
| 207 |
+
|
| 208 |
+
<sup>2</sup> Certain terminal equipment incorporates modem and multiplex functions and there may consequently be no physical LTP at which testing is possible. A similar situation can exist where a channel card in a primary multiplex equipment operates as a lower order multiplexing equipment in its own right (e.g. in accordance with Recommendation X.50 [22]). Where a physical LTP does not exist, Network Operators/Service Providers should bilaterally develop alternative testing arrangements.
|
| 209 |
+
|
| 210 |
+
<sup>3</sup> The renter's premises is a geographical location which is outside the Administration's domain.
|
| 211 |
+
|
| 212 |
+
For data transmission systems operating within an aggregate data rate, it is recommended that the multiplexing equipment used should conform to Table 1. Alternative frame structures may be used by bilateral agreement.
|
| 213 |
+
|
| 214 |
+

|
| 215 |
+
|
| 216 |
+
The diagram illustrates the structure of an international data transmission system. It features two main components at the ends, each represented by a box containing the letters 'M', 'U', and 'X'. These components are connected to a central horizontal line. The left component is connected via a point labeled 'LTP'. The right component is also connected via a point labeled 'LTP'. Between these two LTP points, there are two intermediate points labeled 'TIC'. The segments between the LTP points and the TIC points are labeled 'National link section'. The segment between the two TIC points is labeled 'International link section'. Below the main horizontal line, a long double-headed arrow spans the distance between the two LTP points and is labeled 'International data transmission link'. At the very bottom, another long double-headed arrow spans the entire distance from the leftmost vertical line to the rightmost vertical line and is labeled 'International data transmission system'. A small code 'T0402520-91' is located at the bottom right of the diagram.
|
| 217 |
+
|
| 218 |
+
Diagram of an international data transmission system showing national link sections, international link sections, and the overall international data transmission link and system.
|
| 219 |
+
|
| 220 |
+
NOTE – Where an LTP is located at a TIC, there will be no national link section at that end of the international data transmission link.
|
| 221 |
+
|
| 222 |
+
**Figure 1/M.1300 – An international data transmission system**
|
| 223 |
+
|
| 224 |
+

|
| 225 |
+
|
| 226 |
+
International data transmission system (64 kbit/s)
|
| 227 |
+
|
| 228 |
+
International data transmission link (64 kbit/s)
|
| 229 |
+
|
| 230 |
+
International data transmission system (2048 kbit/s)
|
| 231 |
+
|
| 232 |
+
TNC TNC
|
| 233 |
+
|
| 234 |
+
MUX MUX LTP LTP MUX International data MUX LTP MUX
|
| 235 |
+
|
| 236 |
+
RP transmission link RP
|
| 237 |
+
|
| 238 |
+
MUX (2048 kbit/s) MUX
|
| 239 |
+
|
| 240 |
+
LTP LTP LTP LTP
|
| 241 |
+
|
| 242 |
+
TIC TIC
|
| 243 |
+
|
| 244 |
+
64 kbit/s channel
|
| 245 |
+
|
| 246 |
+
Digital leased circuit (e.g. 9.6 kbit/s)
|
| 247 |
+
|
| 248 |
+
International data transmission system (64 kbit/s)
|
| 249 |
+
|
| 250 |
+
International data transmission link (64 kbit/s)
|
| 251 |
+
|
| 252 |
+
64 kbit/s International data 64 kbit/s T0407300-97
|
| 253 |
+
|
| 254 |
+
transmission
|
| 255 |
+
|
| 256 |
+
system (2048 kbit/s)
|
| 257 |
+
|
| 258 |
+
International data transmission
|
| 259 |
+
|
| 260 |
+
link (2048 kbit/s)
|
| 261 |
+
|
| 262 |
+
– Adaption function
|
| 263 |
+
– Termination function
|
| 264 |
+
– Input/output
|
| 265 |
+
|
| 266 |
+
TIC Terminal International Centre
|
| 267 |
+
TNC Terminal National Centre
|
| 268 |
+
RP Renter's Premises
|
| 269 |
+
LTP Link Terminating Point
|
| 270 |
+
MUX Multiplexing Equipment (or Cross-connect system)
|
| 271 |
+
|
| 272 |
+
Diagram of a typical international data transmission system (Figure 2a/M.1300). The diagram shows a complex network architecture with multiple layers of transmission. At the top, a hierarchy of arrows indicates nested systems: International data transmission system (64 kbit/s), International data transmission link (64 kbit/s), International data transmission system (2048 kbit/s), and International data transmission link (2048 kbit/s). Below this, a '64 kbit/s channel' is shown within a 'Digital leased circuit (e.g. 9.6 kbit/s)'. The physical components include Renter's Premises (RP) with MUX units, Terminal National Centres (TNC) also with MUX units, and Terminal International Centres (TIC) with larger MUX units. Link Terminating Points (LTP) are marked at various connection interfaces. The bottom half of the diagram uses dashed lines and triangular symbols to represent the logical flow through adaption and termination functions, starting and ending with pentagonal input/output symbols. Labels indicate bit rates like 64 kbit/s and 2048 kbit/s at different stages. The diagram is indexed as T0407300-97.
|
| 273 |
+
|
| 274 |
+
**Figure 2a/M.1300 – A typical international data transmission system carried on a higher order system, comprising Multiplex equipment**
|
| 275 |
+
|
| 276 |
+

|
| 277 |
+
|
| 278 |
+
TIC DXC
|
| 279 |
+
RP
|
| 280 |
+
64 2
|
| 281 |
+
2 34
|
| 282 |
+
34 140
|
| 283 |
+
140 34
|
| 284 |
+
34 2
|
| 285 |
+
2 64
|
| 286 |
+
National data transmission system (2048 kbit/s)
|
| 287 |
+
International data transmission link (2048 kbit/s)
|
| 288 |
+
International data transmission system (2048 kbit/s)
|
| 289 |
+
Cross-Connection at 64 kbit/s
|
| 290 |
+
64 kbit/s
|
| 291 |
+
2 Mbit/s
|
| 292 |
+
8 Mbit/s
|
| 293 |
+
34 Mbit/s
|
| 294 |
+
140 Mbit/s
|
| 295 |
+
T0407310-97
|
| 296 |
+
|
| 297 |
+
▽ – Adaption function
|
| 298 |
+
– Termination function
|
| 299 |
+
▱ – Input/output
|
| 300 |
+
○ – Connection function
|
| 301 |
+
RP Renter's Premises
|
| 302 |
+
DXC Digital Cross-Connect
|
| 303 |
+
|
| 304 |
+
Diagram of a typical international data transmission system (Figure 2b/M.1300) showing the hierarchy of data rates and the placement of cross-connect equipment.
|
| 305 |
+
|
| 306 |
+
**Figure 2b/M.1300 – A typical international data transmission system carried on a higher order system, comprising cross-connect equipment**
|
| 307 |
+
|
| 308 |
+
Figure 2b above shows the case where the terminal multiplexing equipment is replaced with digital cross-connect equipment. In this case the international data transmission system exists between the mid-points of the two cross-connects. It is therefore possible to define a "virtual point" at the centre of the cross-connect equipment, from where the testing of the international data transmission system is carried out.
|
| 309 |
+
|
| 310 |
+
In a similar way, a national data transmission system can be defined which exists, in the case illustrated above, between the TIC and the renter's premises.
|
| 311 |
+
|
| 312 |
+

|
| 313 |
+
|
| 314 |
+
Diagram (a) showing Multiplex/Demultiplex equipment located at the TIC. It depicts an 'International data transmission system' between two TIC boxes. Inside each TIC box are components M, U, and X. A line labeled 'International data transmission link' connects the LTP (Link Terminating Point) of component X in one TIC box to the LTP of component X in the other TIC box. The U component in each TIC box is connected to this link via a circle.
|
| 315 |
+
|
| 316 |
+
**a) Multiplex/Demultiplex equipment located at the TIC**
|
| 317 |
+
|
| 318 |
+

|
| 319 |
+
|
| 320 |
+
Diagram (b) showing Multiplex/Demultiplex equipment located at the TNC. It depicts an 'International data transmission system' between two TNC boxes. The system is divided into three 'link sections': 'National link section', 'International link section', and 'National link section'. Inside each TNC box are components M, U, and X. The 'International data transmission link' connects the LTP of component X in one TNC box to the LTP of component X in the other TNC box. Along this link, there are circles representing connection points: one at each TNC box, and two within the 'International link section' labeled 'TIC'.
|
| 321 |
+
|
| 322 |
+
**b) Multiplex/Demultiplex equipment located at the TNC**
|
| 323 |
+
|
| 324 |
+

|
| 325 |
+
|
| 326 |
+
Diagram (c) showing Multiplex/Demultiplex equipment located at the RP. It depicts an 'International data transmission system' between two RP boxes. The system is divided into three 'link sections': 'National link section', 'International link section', and 'National link section'. Inside each RP box are components M, U, and X. The 'International data transmission link' connects the LTP of component X in one RP box to the LTP of component X in the other RP box. Along this link, there are circles representing connection points: one at each RP box, two within the first 'National link section' labeled 'TNC', two within the 'International link section' labeled 'TIC', and two within the second 'National link section' labeled 'TNC'.
|
| 327 |
+
|
| 328 |
+
**c) Multiplex/Demultiplex equipment located at the RP**
|
| 329 |
+
|
| 330 |
+

|
| 331 |
+
|
| 332 |
+
Diagram (d) showing a data transmission system routed directly between RPs. It depicts an 'International data transmission system' between two RP boxes. A direct line labeled '(e.g. A direct satellite link)' connects the U component of component X in one RP box to the U component of component X in the other RP box. Below this, a line labeled 'International data transmission link' connects the LTP of component X in one RP box to the LTP of component X in the other RP box.
|
| 333 |
+
|
| 334 |
+
**d) A data transmission system routed directly between RPs**
|
| 335 |
+
|
| 336 |
+
T0401740-90
|
| 337 |
+
|
| 338 |
+
LTP Link Terminating Point
|
| 339 |
+
RP Renters' premises
|
| 340 |
+
TIC Terminal International Centre
|
| 341 |
+
TNC Terminal National Centre
|
| 342 |
+
|
| 343 |
+
**Figure 3/M.1300 – Typical configurations of an international data transmission system**
|
| 344 |
+
|
| 345 |
+

|
| 346 |
+
|
| 347 |
+
The diagram illustrates an international data transmission system architecture. At the far left and far right, there are 'Renter's premises' (indicated by dashed boxes containing a triangle symbol). These premises connect to 'Analogue' inputs of 'A/D Converter' (left) and 'D/A Converter' (right) blocks. The 'Analogue' inputs are also connected to 'TDM' (Time Division Multiplexing) units. The 'A/D Converter' and 'D/A Converter' blocks have 'Digital' outputs that connect to 'Link Terminating Point' (LTP) units, each containing 'M' (Multiplexer), 'U' (User), and 'X' (Switch) components. The LTP units are connected to a central 'International 56 kbit/s data transmission link'. Below the LTP units, there are 'IPSS centre' (International Packet Switching Service) units, each containing an 'X' (Switch) symbol. The IPSS centres are connected to 'Spare channels' which lead into the 'International data transmission system'. The entire system is framed by a top horizontal line labeled 'International TDM telegraph system' and a middle horizontal line labeled 'International leased data circuits'. The bottom horizontal line is labeled 'International data transmission system'. The diagram is labeled 'T0402530-91' in the bottom right corner.
|
| 348 |
+
|
| 349 |
+
Legend:
|
| 350 |
+
|
| 351 |
+
- △ Renter's premises
|
| 352 |
+
- X IPSS International Packet Switching Service
|
| 353 |
+
- TDM Time Division Multiplexing
|
| 354 |
+
- LTP Link Terminating Point
|
| 355 |
+
|
| 356 |
+
Diagram of an international data transmission system showing various presentations at renter's premises. It includes components like TDM, A/D and D/A converters, Link Terminating Points (LTP), IPSS centres, and spare channels. The diagram illustrates the flow of data from renter's premises through various conversion and multiplexing stages into a common international transmission system.
|
| 357 |
+
|
| 358 |
+
Figure 4/M.1300 – An example of an international data transmission system with different presentations at renter's premises
|
| 359 |
+
|
| 360 |
+
**Table 1/M.1300 – Recommended interfaces and frame structures for multiplexing equipment operating between 1544 kbit/s and 140 Mbit/s**
|
| 361 |
+
|
| 362 |
+
| | ITU-T Recommendation | |
|
| 363 |
+
|--------------------------------------------------------------------------------------------------------------------------------------------------|-----------------------------------------------|-------------------|
|
| 364 |
+
| | Electrical/physical interface characteristics | Framing structure |
|
| 365 |
+
| 1 544 kbit/s | Clause 2/G.703 [1] | 2.1/G.704 [2] |
|
| 366 |
+
| 2 048 kbit/s | Clause 6/G.703 [1] | 2.3/G.704 [2] |
|
| 367 |
+
| 6 312 kbit/s | Clause 3/G.703 [1] | 4.1/G.704 [2] |
|
| 368 |
+
| 8 448 kbit/s | Clause 7/G.703 [1] | 6.1/G.704 [2] |
|
| 369 |
+
| 34 368 kbit/s | Clause 8/G.703 [1] | 1.4/G.751 [5] |
|
| 370 |
+
| 44 736 kbit/s | Clause 5/G.703 [1] | 1.3/G.752 [6] |
|
| 371 |
+
| 139 264 kbit/s | Clause 9/G.703 [1] | 1.5/G.751 [5] |
|
| 372 |
+
| NOTE 1 – Channel associated signalling for 2048 kbit/s frame structures, where required, should conform to 5.1.3.2/G.704 [2], and 5.1/G.732 [3]. | | |
|
| 373 |
+
| NOTE 2 – 2048 kbit/s frame structures that provide common channel signalling should conform to clause 2/G.736 [4]. | | |
|
| 374 |
+
| NOTE 3 – Signalling arrangements for 1544 kbit/s frame structures, where required, are described in 3.1.3/G.704 [2]. | | |
|
| 375 |
+
|
| 376 |
+
## 8 General description of international data transmission links
|
| 377 |
+
|
| 378 |
+
International data transmission links may typically be provided on a variety of transmission media in various combinations:
|
| 379 |
+
|
| 380 |
+
- paired copper cable;
|
| 381 |
+
- FDM carrier systems (group or supergroup) via symmetric pair or coaxial cable systems, microwave radio links, satellites;
|
| 382 |
+
- voice grade analogue or digital channels;
|
| 383 |
+
- digital links via coaxial or optical fibre cable systems, microwave radio links or satellite systems.
|
| 384 |
+
|
| 385 |
+
Modems or interface adaptors can be used to derive appropriate signals for the transmission medium being used. The LTPs of an international data transmission link provide digital interface test points and should preferably operate as standard G.703 [1] interfaces, although other interfaces (such as Recommendations V.24 [19], V.28 [20], X.21 [21], V.11 [18], etc.) may be used.
|
| 386 |
+
|
| 387 |
+
Figure 5 gives an overview of possible configurations for an international data transmission link. While hybrid combinations of link configurations are possible, it is preferable that the same interface type be presented at each end. It should be noted that certain multiplexing equipment will not interwork correctly if differing interface presentations are provided at each LTP.
|
| 388 |
+
|
| 389 |
+
The international data transmission link should maintain the transparency of the data flow, which means that the transmission rate at all points of the link will be at or above the data rate of the LTP.
|
| 390 |
+
|
| 391 |
+
For data transmission links routed via a mixture of transmission media (e.g. microwave, optical fibre or satellite, etc.) the term "section" is used to refer to a section of the overall link, or international or national link section, routed wholly on one type of transmission medium.
|
| 392 |
+
|
| 393 |
+

|
| 394 |
+
|
| 395 |
+
**a) Direct connection via an analogue network**
|
| 396 |
+
|
| 397 |
+
**b) Connection to a digital network via interface adaptors**
|
| 398 |
+
|
| 399 |
+
**c) Direct connection to a digital network**
|
| 400 |
+
|
| 401 |
+
**d) Routed via higher order international data transmission system**
|
| 402 |
+
|
| 403 |
+
T0401760-90
|
| 404 |
+
|
| 405 |
+
Four diagrams (a, b, c, d) showing different configurations of an international data transmission link between two MUX units. Each MUX unit contains M, U, and X components. Diagram a) shows a direct connection via an analogue network with two modems. Diagram b) shows a connection to a digital network via interface adaptors and DNI points. Diagram c) shows a direct connection to a digital network. Diagram d) shows a connection routed via a higher order international data transmission system with two interface adaptors. All diagrams include a double-headed arrow labeled 'International data transmission link'.
|
| 406 |
+
|
| 407 |
+
DNI Digital Network Interface
|
| 408 |
+
LTP Link Terminating Point (digital interface)
|
| 409 |
+
MUX Multiplexing/demultiplexing (or similar) equipment
|
| 410 |
+
|
| 411 |
+
**Figure 5/M.1300 – Configuration of an international data transmission link**
|
| 412 |
+
|
| 413 |
+
The "Digital Network" shown in Figures 5 b) and 5 c) signifies that the international data transmission system cannot be broken down to data rates of less than the aggregate transmission rate, but it does include the possibility of the international data transmission system being carried as a channel in a higher rate system.
|
| 414 |
+
|
| 415 |
+
## **9 Timing sources**
|
| 416 |
+
|
| 417 |
+
The timing feed at each end of an international data transmission system should be derived from a primary reference clock operating in accordance with clause 2/G.811 [8].
|
| 418 |
+
|
| 419 |
+
This will allow for correct plesiochronous operation between Network Operators/Service Providers.
|
| 420 |
+
|
| 421 |
+
## **10 Control and sub-control stations**
|
| 422 |
+
|
| 423 |
+
Network Operators/Service Providers may elect to assign control and sub-control status to the terminal stations of an international data transmission system in accordance with Recommendations M.1012 [10] and M.1013 [11]. However, in order to achieve the fastest possible response times for maintenance activities on behalf of users, it is acceptable for both terminal stations of an international data transmission system to assume control station status. It is however essential for the control stations involved to develop an effective mechanism for coordinating maintenance activity and that they inform each other of specific maintenance actions as rapidly as possible.
|
| 424 |
+
|
| 425 |
+
## **11 Reserve arrangements**
|
| 426 |
+
|
| 427 |
+
Since international data transmission links often carry international leased circuits, data systems, and/or TDM telegraph systems, some Network Operators/Service Providers find it useful to nominate a reserve link for restoration purposes in the event of failure of the normal link. This should be decided by bilateral agreement between the Network Operators/Service Providers at the time of planning the link. Such reserve links must be set up or lined up to meet the requirements of the normal data transmission link and, wherever possible, should follow a different route from the route of the normal link.
|
| 428 |
+
|
| 429 |
+
## **12 Designations**
|
| 430 |
+
|
| 431 |
+
The form of designations for international data transmission systems and international data transmission links is described in Recommendation M.1400 [17].
|
| 432 |
+
|
| 433 |
+
|
| 434 |
+
|
| 435 |
+
## ITU-T RECOMMENDATIONS SERIES
|
| 436 |
+
|
| 437 |
+
- Series A Organization of the work of the ITU-T
|
| 438 |
+
- Series B Means of expression: definitions, symbols, classification
|
| 439 |
+
- Series C General telecommunication statistics
|
| 440 |
+
- Series D General tariff principles
|
| 441 |
+
- Series E Overall network operation, telephone service, service operation and human factors
|
| 442 |
+
- Series F Non-telephone telecommunication services
|
| 443 |
+
- Series G Transmission systems and media, digital systems and networks
|
| 444 |
+
- Series H Audiovisual and multimedia systems
|
| 445 |
+
- Series I Integrated services digital network
|
| 446 |
+
- Series J Transmission of television, sound programme and other multimedia signals
|
| 447 |
+
- Series K Protection against interference
|
| 448 |
+
- Series L Construction, installation and protection of cables and other elements of outside plant
|
| 449 |
+
- Series M TMN and network maintenance: international transmission systems, telephone circuits, telegraphy, facsimile and leased circuits**
|
| 450 |
+
- Series N Maintenance: international sound programme and television transmission circuits
|
| 451 |
+
- Series O Specifications of measuring equipment
|
| 452 |
+
- Series P Telephone transmission quality, telephone installations, local line networks
|
| 453 |
+
- Series Q Switching and signalling
|
| 454 |
+
- Series R Telegraph transmission
|
| 455 |
+
- Series S Telegraph services terminal equipment
|
| 456 |
+
- Series T Terminals for telematic services
|
| 457 |
+
- Series U Telegraph switching
|
| 458 |
+
- Series V Data communication over the telephone network
|
| 459 |
+
- Series X Data networks and open system communication
|
| 460 |
+
- Series Z Programming languages
|
marked/M/T-REC-M.1301-200101-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,689 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
ITU logo: A globe with a lightning bolt and the letters ITU.
|
| 6 |
+
|
| 7 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 8 |
+
|
| 9 |
+
**ITU-T**
|
| 10 |
+
|
| 11 |
+
**M.1301**
|
| 12 |
+
|
| 13 |
+
TELECOMMUNICATION
|
| 14 |
+
STANDARDIZATION SECTOR
|
| 15 |
+
OF ITU
|
| 16 |
+
|
| 17 |
+
(01/2001)
|
| 18 |
+
|
| 19 |
+
SERIES M: TMN AND NETWORK MAINTENANCE:
|
| 20 |
+
INTERNATIONAL TRANSMISSION SYSTEMS,
|
| 21 |
+
TELEPHONE CIRCUITS, TELEGRAPHY, FACSIMILE
|
| 22 |
+
AND LEASED CIRCUITS
|
| 23 |
+
|
| 24 |
+
International data transmission systems
|
| 25 |
+
|
| 26 |
+
---
|
| 27 |
+
|
| 28 |
+
**General description and operational procedures
|
| 29 |
+
for international SDH leased circuits**
|
| 30 |
+
|
| 31 |
+
ITU-T Recommendation M.1301
|
| 32 |
+
|
| 33 |
+
(Formerly CCITT Recommendation)
|
| 34 |
+
|
| 35 |
+
---
|
| 36 |
+
|
| 37 |
+
# ITU-T M-SERIES RECOMMENDATIONS
|
| 38 |
+
|
| 39 |
+
# TMN AND NETWORK MAINTENANCE: INTERNATIONAL TRANSMISSION SYSTEMS, TELEPHONE CIRCUITS, TELEGRAPHY, FACSIMILE AND LEASED CIRCUITS
|
| 40 |
+
|
| 41 |
+
| | |
|
| 42 |
+
|---------------------------------------------------------------------------------|----------------------|
|
| 43 |
+
| Introduction and general principles of maintenance and maintenance organization | M.10–M.299 |
|
| 44 |
+
| International transmission systems | M.300–M.559 |
|
| 45 |
+
| International telephone circuits | M.560–M.759 |
|
| 46 |
+
| Common channel signalling systems | M.760–M.799 |
|
| 47 |
+
| International telegraph systems and phototelegraph transmission | M.800–M.899 |
|
| 48 |
+
| International leased group and supergroup links | M.900–M.999 |
|
| 49 |
+
| International leased circuits | M.1000–M.1099 |
|
| 50 |
+
| Mobile telecommunication systems and services | M.1100–M.1199 |
|
| 51 |
+
| International public telephone network | M.1200–M.1299 |
|
| 52 |
+
| <b>International data transmission systems</b> | <b>M.1300–M.1399</b> |
|
| 53 |
+
| Designations and information exchange | M.1400–M.1999 |
|
| 54 |
+
| International transport network | M.2000–M.2999 |
|
| 55 |
+
| Telecommunications management network | M.3000–M.3599 |
|
| 56 |
+
| Integrated services digital networks | M.3600–M.3999 |
|
| 57 |
+
| Common channel signalling systems | M.4000–M.4999 |
|
| 58 |
+
|
| 59 |
+
*For further details, please refer to the list of ITU-T Recommendations.*
|
| 60 |
+
|
| 61 |
+
# **General description and operational procedures for international SDH leased circuits**
|
| 62 |
+
|
| 63 |
+
## **Summary**
|
| 64 |
+
|
| 65 |
+
This Recommendation provides a general description of international synchronous digital leased circuits with an SDH presentation to the Customer, and of the basic requirements for their effective operation. The case of mixed SDH/PDH leased circuits is also described.
|
| 66 |
+
|
| 67 |
+
## **Source**
|
| 68 |
+
|
| 69 |
+
ITU-T Recommendation M.1301 was prepared by ITU-T Study Group 4 (2001-2004) and approved under the WTSA Resolution 1 procedure on 19 January 2001.
|
| 70 |
+
|
| 71 |
+
## **Keywords**
|
| 72 |
+
|
| 73 |
+
Digital leased circuit, digital path, international synchronous digital leased circuit, network termination equipment, path OverHead (POH), path terminating equipment, path termination point, section OverHead (SOH), synchronous Digital Hierarchy (SDH), trail, trail Termination Point (TTP).
|
| 74 |
+
|
| 75 |
+
## FOREWORD
|
| 76 |
+
|
| 77 |
+
The International Telecommunication Union (ITU) is the United Nations specialized agency in the field of telecommunications. The ITU Telecommunication Standardization Sector (ITU-T) is a permanent organ of ITU. ITU-T is responsible for studying technical, operating and tariff questions and issuing Recommendations on them with a view to standardizing telecommunications on a worldwide basis.
|
| 78 |
+
|
| 79 |
+
The World Telecommunication Standardization Assembly (WTSA), which meets every four years, establishes the topics for study by the ITU-T study groups which, in turn, produce Recommendations on these topics.
|
| 80 |
+
|
| 81 |
+
The approval of ITU-T Recommendations is covered by the procedure laid down in WTSA Resolution 1.
|
| 82 |
+
|
| 83 |
+
In some areas of information technology which fall within ITU-T's purview, the necessary standards are prepared on a collaborative basis with ISO and IEC.
|
| 84 |
+
|
| 85 |
+
## NOTE
|
| 86 |
+
|
| 87 |
+
In this Recommendation, the expression "Administration" is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 88 |
+
|
| 89 |
+
## INTELLECTUAL PROPERTY RIGHTS
|
| 90 |
+
|
| 91 |
+
ITU draws attention to the possibility that the practice or implementation of this Recommendation may involve the use of a claimed Intellectual Property Right. ITU takes no position concerning the evidence, validity or applicability of claimed Intellectual Property Rights, whether asserted by ITU members or others outside of the Recommendation development process.
|
| 92 |
+
|
| 93 |
+
As of the date of approval of this Recommendation, ITU had not received notice of intellectual property, protected by patents, which may be required to implement this Recommendation. However, implementors are cautioned that this may not represent the latest information and are therefore strongly urged to consult the TSB patent database.
|
| 94 |
+
|
| 95 |
+
© ITU 2001
|
| 96 |
+
|
| 97 |
+
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from ITU.
|
| 98 |
+
|
| 99 |
+
## CONTENTS
|
| 100 |
+
|
| 101 |
+
| | | Page |
|
| 102 |
+
|-------|--------------------------------------------------------------------------------|------|
|
| 103 |
+
| 1 | Scope..... | 1 |
|
| 104 |
+
| 2 | References..... | 1 |
|
| 105 |
+
| 3 | Terms and definitions ..... | 4 |
|
| 106 |
+
| 4 | Abbreviations..... | 4 |
|
| 107 |
+
| 5 | General description of international synchronous digital leased circuits ..... | 6 |
|
| 108 |
+
| 5.1 | Leased circuit configuration ..... | 6 |
|
| 109 |
+
| 5.2 | Network interfaces..... | 8 |
|
| 110 |
+
| 5.3 | Timing and network synchronization ..... | 9 |
|
| 111 |
+
| 5.4 | Designations..... | 9 |
|
| 112 |
+
| 5.5 | Performance ..... | 9 |
|
| 113 |
+
| 6 | Operational procedures ..... | 9 |
|
| 114 |
+
| 6.1 | Control and sub-control stations ..... | 10 |
|
| 115 |
+
| 6.2 | BIS procedures..... | 10 |
|
| 116 |
+
| 6.2.1 | Section-by-section testing and In-Service Monitoring (ISM) ..... | 11 |
|
| 117 |
+
| 6.2.2 | National circuit portions ..... | 11 |
|
| 118 |
+
| 6.2.3 | International circuit portions ..... | 11 |
|
| 119 |
+
| 6.2.4 | BIS using an alternative international link ..... | 12 |
|
| 120 |
+
| 6.2.5 | End-to-end test..... | 12 |
|
| 121 |
+
| 6.2.6 | Alternative end-to-end test ..... | 12 |
|
| 122 |
+
| 6.3 | Maintenance procedures ..... | 13 |
|
| 123 |
+
| 6.3.1 | Performance monitoring and data collection..... | 13 |
|
| 124 |
+
| 6.3.2 | Performance history, thresholding and reporting ..... | 14 |
|
| 125 |
+
| 6.3.3 | Maintenance intervention tests ..... | 14 |
|
| 126 |
+
| 6.3.4 | Test configurations ..... | 15 |
|
| 127 |
+
| 6.3.5 | Test access at DCS equipment..... | 15 |
|
| 128 |
+
| 6.3.6 | Returning-to-service tests ..... | 15 |
|
| 129 |
+
| 6.3.7 | Planned maintenance ..... | 15 |
|
| 130 |
+
| 7 | Maintenance records ..... | 16 |
|
| 131 |
+
| 8 | Protection and reserve arrangements ..... | 16 |
|
| 132 |
+
| | Annex A – Fault management ..... | 16 |
|
| 133 |
+
| A.1 | Initial reception of a fault report ..... | 16 |
|
| 134 |
+
| A.2 | Fault information exchange ..... | 17 |
|
| 135 |
+
| A.3 | Fault localization..... | 18 |
|
| 136 |
+
|
| 137 |
+
| | <b>Page</b> |
|
| 138 |
+
|-----------------------------------------------------------------------|-------------|
|
| 139 |
+
| A.4 Circuit restoration ..... | 19 |
|
| 140 |
+
| A.5 Temporary service restoration ..... | 19 |
|
| 141 |
+
| A.5.1 Mechanisms for implementing temporary service restoration ..... | 19 |
|
| 142 |
+
| A.5.2 Time to restore service ..... | 19 |
|
| 143 |
+
| A.5.3 Restoration procedure..... | 20 |
|
| 144 |
+
| A.5.4 Returning to normal routing ..... | 20 |
|
| 145 |
+
| A.5.5 Information that should be exchanged..... | 20 |
|
| 146 |
+
| A.6 Automatic rerouting of international SDH transmission links ..... | 20 |
|
| 147 |
+
| A.7 Precautions to be taken in the use of DCSs ..... | 20 |
|
| 148 |
+
|
| 149 |
+
## **General description and operational procedures for international SDH leased circuits**
|
| 150 |
+
|
| 151 |
+
# **1 Scope**
|
| 152 |
+
|
| 153 |
+
This Recommendation defines international synchronous digital leased circuits with an SDH presentation to the Customer (hereafter called SDH leased circuits) which are transported via STM-N transmission links over a variety of transmission media using a number of network technologies. The case of mixed SDH/PDH leased circuits is also described.
|
| 154 |
+
|
| 155 |
+
# **2 References**
|
| 156 |
+
|
| 157 |
+
The following ITU-T Recommendations and other references contain provisions which, through reference in this text, constitute provisions of this Recommendation. At the time of publication, the editions indicated were valid. All Recommendations and other references are subject to revision; all users of this Recommendation are therefore encouraged to investigate the possibility of applying the most recent edition of the Recommendations and other references listed below. A list of the currently valid ITU-T Recommendations is regularly published.
|
| 158 |
+
|
| 159 |
+
- [1] ITU-T G.701 (1993), *Vocabulary of digital transmission and multiplexing and Pulse Code Modulation (PCM) terms.*
|
| 160 |
+
- [2] ITU-T G.703 (1998), *Physical/electrical characteristics of hierarchical digital interfaces.*
|
| 161 |
+
- [3] ITU-T G.707/Y.1322 (2000), *Network node interface for the synchronous digital hierarchy (SDH).*
|
| 162 |
+
- [4] ITU-T G.708 (1999), *Sub STM-0 network node interface for the synchronous digital hierarchy (SDH).*
|
| 163 |
+
- [5] ITU-T G.783 (2000), *Characteristics of synchronous digital hierarchy (SDH) equipment functional blocks.*
|
| 164 |
+
- [6] ITU-T G.784 (1999), *Synchronous digital hierarchy (SDH) management.*
|
| 165 |
+
- [7] ITU-T G.803 (2000), *Architectures of transport networks based on the synchronous digital hierarchy (SDH).*
|
| 166 |
+
- [8] ITU-T G.811 (1997), *Timing characteristics of primary reference clocks.*
|
| 167 |
+
- [9] ITU-T G.812 (1998), *Timing requirements of slave clocks suitable for use as node clocks in synchronization networks.*
|
| 168 |
+
- [10] ITU-T G.822 (1988), *Controlled slip rate objectives on an international digital connection.*
|
| 169 |
+
- [11] ITU-T G.823 (2000), *The control of jitter and wander within digital networks which are based on the 2048 kbit/s hierarchy.*
|
| 170 |
+
- [12] ITU-T G.824 (2000), *The control of jitter and wander within digital networks which are based on the 1544 kbit/s hierarchy.*
|
| 171 |
+
- [13] ITU-T G.825 (2000), *The control of jitter and wander within digital networks which are based on the synchronous digital hierarchy (SDH).*
|
| 172 |
+
- [14] ITU-T G.826 (1999), *Error performance parameters and objectives for international, constant bit rate digital paths at or above the primary rate.*
|
| 173 |
+
|
| 174 |
+
- [15] ITU-T G.827 (2000), *Availability parameters and objectives for path elements of international constant bit-rate digital paths at or above the primary rate.*
|
| 175 |
+
- [16] ITU-T G.828 (2000), *Error performance parameters and objectives for international constant bit rate synchronous digital paths.*
|
| 176 |
+
- [17] ITU-T G.841 (1998), *Types and characteristics of SDH network protection architectures.*
|
| 177 |
+
- [18] ITU-T G.842 (1997), *Interworking of SDH network protection architectures.*
|
| 178 |
+
- [19] ITU-T G.957 (1999), *Optical interfaces for equipments and systems relating to the synchronous digital hierarchy (SDH).*
|
| 179 |
+
- [20] ITU-T I.432.1 (1999), *B-ISDN user-network interface – Physical layer specification: General characteristics.*
|
| 180 |
+
- [21] ITU-T I.432.2 (1999), *B-ISDN user-network interface – Physical layer specification: 155 520 kbit/s and 622 080 kbit/s operation.*
|
| 181 |
+
- [22] ITU-T I.432.3 (1999), *B-ISDN user-network interface – Physical layer specification: 1544 kbit/s and 2048 kbit/s operation.*
|
| 182 |
+
- [23] ITU-T I.432.4 (1999), *B-ISDN user-network interface – Physical layer specification: 51 840 kbit/s operation.*
|
| 183 |
+
- [24] ITU-T I.432.5 (1997), *B-ISDN user-network interface – Physical layer specification: 25 600 kbit/s operation.*
|
| 184 |
+
- [25] ITU-T M.20 (1992), *Maintenance philosophy for telecommunication networks.*
|
| 185 |
+
- [26] ITU-T M.34 (1988), *Performance monitoring on international transmission systems and equipment.*
|
| 186 |
+
- [27] ITU-T M.60 (1993), *Maintenance terminology and definitions.*
|
| 187 |
+
- [28] ITU-T M.85 (1992), *Fault report points.*
|
| 188 |
+
- [29] ITU-T M.90 (1988), *Sub-control stations.*
|
| 189 |
+
- [30] ITU-T M.1012 (1988), *Circuit control station for leased and special circuits.*
|
| 190 |
+
- [31] ITU-T M.1013 (1988), *Sub-control station for leased and special circuits.*
|
| 191 |
+
- [32] ITU-T M.1045 (1996), *Preliminary exchange of information for the provision of international leased circuits and international data transmission systems.*
|
| 192 |
+
- [33] ITU-T M.1340 (2000), *Performance objectives, allocations and limits for international PDH leased circuits and supporting data transmission links and systems.*
|
| 193 |
+
- [34] ITU-T M.1370 (1998), *Bringing-into-service of international data transmission systems.*
|
| 194 |
+
- [35] ITU-T M.1375 (1998), *Maintenance of international data transmission systems.*
|
| 195 |
+
- [36] ITU-T M.1380 (2000), *Bringing-into-service of international leased circuits that are supported by international data transmission systems.*
|
| 196 |
+
- [37] ITU-T M.1385 (2000), *Maintenance of international leased circuits that are supported by international data transmission systems.*
|
| 197 |
+
- [38] ITU-T M.1400 (2000), *Designations for inter-operator networks.*
|
| 198 |
+
- [39] ITU-T M.1510 (1992), *Exchange of contact point information for the maintenance of international services and the international network.*
|
| 199 |
+
- [40] ITU-T M.1520 (1992), *Standardized information exchange between Administrations.*
|
| 200 |
+
- [41] ITU-T M.1530 (1999), *Network maintenance information.*
|
| 201 |
+
|
| 202 |
+
- [42] ITU-T M.1532 (2000), *Network maintenance service performance agreement (MSPA)*.
|
| 203 |
+
- [43] ITU-T M.1535 (1996), *Principles for maintenance information to be exchanged at customer contact point (MICC)*.
|
| 204 |
+
- [44] ITU-T M.1537 (1997), *Definition of maintenance information to be exchanged at customer contact point (MICC)*.
|
| 205 |
+
- [45] ITU-T M.1539 (1999), *Management of the grade of network maintenance services at the maintenance service customer contact point (MSCC)*.
|
| 206 |
+
- [46] ITU-T M.1540 (1994), *Exchange of information for planned outages of transmission systems*.
|
| 207 |
+
- [47] ITU-T M.1560 (1992), *Escalation procedure for international leased circuits*.
|
| 208 |
+
- [48] ITU-T M.2100 (1995), *Performance limits for bringing-into-service and maintenance of international PDH paths, sections and transmission systems*.
|
| 209 |
+
- [49] ITU-T M.2101 (2000), *Performance limits and objectives for bringing-into-service and maintenance of international SDH paths and multiplex sections*.
|
| 210 |
+
- [50] ITU-T M.2102 (2000), *Maintenance thresholds and procedures for recovery mechanisms (protection and restoration) of international SDH VC trails (paths) and multiplex section*.
|
| 211 |
+
- [51] ITU-T M.2110 (1997), *Bringing-into-service of international PDH paths, sections and transmission systems and SDH paths and multiplex sections*.
|
| 212 |
+
- [52] ITU-T M.2120 (2000), *PDH path, section and transmission system and SDH path and multiplex section fault detection and localization procedures*.
|
| 213 |
+
- [53] ITU-T M.2130 (2000), *Operational procedures for the maintenance of the transport network*.
|
| 214 |
+
- [54] ITU-T M.2140 (2000), *Transport network event correlation*.
|
| 215 |
+
- [55] ITU-T M.3010 (2000), *Principles for a telecommunications management network*.
|
| 216 |
+
- [56] ITU-T M.3208.1 (1997), *TMN management services for dedicated and reconfigurable circuits network: Leased circuit services*.
|
| 217 |
+
- [57] ITU-T M.3208.2 (1999), *TMN management services for dedicated and reconfigurable circuits network: Connection management of pre-provisioned service link connections to form a leased circuit service*.
|
| 218 |
+
- [58] ITU-T M.3208.3 (2000), *TMN management services for dedicated and reconfigurable circuits network: Virtual private network service*.
|
| 219 |
+
- [59] ITU-T M.3320 (1997), *Management requirements framework for the TMN X-interface*.
|
| 220 |
+
- [60] ITU-T M.3300 (1998), *TMN F-interface requirements*.
|
| 221 |
+
- [61] ITU-T M.3400 (2000), *TMN management functions*.
|
| 222 |
+
- [62] ITU-T O.172 (2001), *Jitter and wander measuring equipment for digital systems which are based on the synchronous digital hierarchy (SDH)*.
|
| 223 |
+
- [63] ITU-T O.181 (1996), *Equipment to assess error performance on STM-N interfaces*.
|
| 224 |
+
- [64] ITU-T V.54 (1988), *Loop test devices for modems*.
|
| 225 |
+
- [65] ITU-T X.150 (1988), *Principles of maintenance testing for public data networks using Data Terminal Equipment (DTE) and Data Circuit-terminating Equipment (DCE) test loops*.
|
| 226 |
+
- [66] ITU-T X.790 (1995), *Trouble management function for ITU-T applications*.
|
| 227 |
+
|
| 228 |
+
[67] ITU-T M.2101.1 (1997), *Performance limits for bringing-into-service and maintenance of international SDH paths and multiplex sections*.<sup>1</sup>
|
| 229 |
+
|
| 230 |
+
# 3 Terms and definitions
|
| 231 |
+
|
| 232 |
+
General terminology and definitions relating to this Recommendation are provided in ITU-T G.701 [1] and ITU-T M.60 [27]. For the purposes of this Recommendation, the following definitions also apply:
|
| 233 |
+
|
| 234 |
+
**3.1 SDH digital path:** a subset of a Digital Trail carrying the SDH payload and associated Path OverHead (POH) through the layered transport network between the two Path Termination Points (PTPs) within the Path Terminating Equipment (PTE). The SDH digital path usually comprises both access network portions and core transport network portions. The network portions comprise one or more SDH regenerator and/or multiplex sections, each of which has an associated Section OverHead (SOH). An SDH digital path may be bidirectional or unidirectional and may comprise both Customer-owned portions and Network Operator (NO)-owned portions.
|
| 235 |
+
|
| 236 |
+
**3.2 SDH digital trail:** the complete end-to-end connection carrying the SDH payload and associated POH through the layered transport network between the two Trail Termination Points (TTPs).
|
| 237 |
+
|
| 238 |
+
**3.3 SDH leased circuit:** a subset of a SDH digital path between the two Network Terminating Equipments (NTEs). An SDH leased circuit may be bidirectional or unidirectional. The SDH leased circuit end points are at the boundaries between the NO(s), or between the NO and the End-user Customer. At this point, the SDH signal contains the SOH, the payload and the associated POH. However, it should be noted that due to regulatory and/or commercial conditions, access to the POH for In-Service Monitoring (ISM) purposes may not be possible at this point by the NO e.g. when the Customer owns the PTE. The Customer should use the standard POH defined in ITU-T G.707 [3]. This is an issue for further study.
|
| 239 |
+
|
| 240 |
+
For the purposes of this Recommendation, the terms "path" and "trail" are assumed to be synonymous.
|
| 241 |
+
|
| 242 |
+
**3.4 Service Level Agreement (SLA):** an SLA or Contract is a set of appropriate procedures and targets formally or informally agreed between Network Operators/Service Providers (NOs/SPs) or between NOs/SPs and Customers, in order to support ITU-T Recommendations, achieve and maintain specified Quality of Service (QoS). The SLA may be an integral part of the Contract. These procedures and targets are related to specific circuit/service availability, error performance, Ready For Service (RFS) date, Mean Time Between Failures (MTBF), Mean Time to Restore Service (MTRS), Mean Time To Repair (MTTR).
|
| 243 |
+
|
| 244 |
+
# 4 Abbreviations
|
| 245 |
+
|
| 246 |
+
This Recommendation uses the following abbreviations:
|
| 247 |
+
|
| 248 |
+
| | |
|
| 249 |
+
|-----|----------------------------|
|
| 250 |
+
| ADM | Add-Drop Multiplex |
|
| 251 |
+
| AIS | Alarm Indication Signal |
|
| 252 |
+
| API | Access Point Identifier |
|
| 253 |
+
| ATM | Asynchronous Transfer Mode |
|
| 254 |
+
| BBE | Background Block Error |
|
| 255 |
+
|
| 256 |
+
---
|
| 257 |
+
|
| 258 |
+
<sup>1</sup> Maintenance of SDH systems designed to meet the long-term error performance of ITU-T G.826 should be maintained to ITU-T M.2101.1.
|
| 259 |
+
|
| 260 |
+
| | |
|
| 261 |
+
|--------|-----------------------------------------------|
|
| 262 |
+
| BIP-n | Bit Interleaved Parity – nth level |
|
| 263 |
+
| B-ISDN | Broadband-Integrated Services Digital Network |
|
| 264 |
+
| CP | Customer's Premises |
|
| 265 |
+
| CRC | Cyclic Redundancy Checksum |
|
| 266 |
+
| CSES | Consecutive Severely Errored Second |
|
| 267 |
+
| DCS | Digital Cross-connect System |
|
| 268 |
+
| EMS | Element Management System |
|
| 269 |
+
| ES | Errored Second |
|
| 270 |
+
| HO-TCM | Higher Order – Tandem Connection Monitoring |
|
| 271 |
+
| IG | International Gateway |
|
| 272 |
+
| IP | Internet Protocol |
|
| 273 |
+
| ISM | In-Service Monitoring |
|
| 274 |
+
| LAPD | Link Access Protocol for D-channel |
|
| 275 |
+
| LO-TCM | Lower Order – Tandem Connection Monitoring |
|
| 276 |
+
| MS | Multiplex Section |
|
| 277 |
+
| MTBF | Mean Time Between Failures |
|
| 278 |
+
| MTRS | Mean Time to Restore Service |
|
| 279 |
+
| MTTR | Mean Time To Repair |
|
| 280 |
+
| NE | Network Element |
|
| 281 |
+
| NMC | Network Management Centre |
|
| 282 |
+
| NMS | Network Management System |
|
| 283 |
+
| NNI | Network Node Interface |
|
| 284 |
+
| NO | Network Operator |
|
| 285 |
+
| NOC | Network Operations Centre |
|
| 286 |
+
| NTE | Network Terminating Equipment |
|
| 287 |
+
| OC-n | Optical Carrier – nth level |
|
| 288 |
+
| OS | Operations System |
|
| 289 |
+
| PDH | Plesiochronous Digital Hierarchy |
|
| 290 |
+
| POH | Path OverHead |
|
| 291 |
+
| PTE | Path Terminating Equipment |
|
| 292 |
+
| PTP | Path Termination Point |
|
| 293 |
+
| QoS | Quality of Service |
|
| 294 |
+
| RFS | Ready For Service |
|
| 295 |
+
| RS | Regenerator Section |
|
| 296 |
+
| SDH | Synchronous Digital Hierarchy |
|
| 297 |
+
| SES | Severely Errored Second |
|
| 298 |
+
| SLA | Service Level Agreement |
|
| 299 |
+
|
| 300 |
+
| | |
|
| 301 |
+
|-------|------------------------------------------|
|
| 302 |
+
| SMS | Service Management System |
|
| 303 |
+
| SOH | Section OverHead |
|
| 304 |
+
| SP | Service Provider |
|
| 305 |
+
| STM-N | Synchronous Transport Module – Nth level |
|
| 306 |
+
| TCM | Tandem Connection Monitoring |
|
| 307 |
+
| TE | Terminal Equipment |
|
| 308 |
+
| TIC | Terminal International Centre |
|
| 309 |
+
| TM | Terminal Multiplexer |
|
| 310 |
+
| TMN | Telecommunication Management Network |
|
| 311 |
+
| TNC | Terminal National Centre |
|
| 312 |
+
| TTP | Trail Termination Point |
|
| 313 |
+
| UNI | User Network Interface |
|
| 314 |
+
| UTC | Universal Coordinated Time |
|
| 315 |
+
| VC-n | Virtual Container – nth level |
|
| 316 |
+
|
| 317 |
+
# 5 General description of international synchronous digital leased circuits
|
| 318 |
+
|
| 319 |
+
An international synchronous digital leased circuit with SDH presentation to the Customer is comprised of an SDH transmission trail between Network Terminating Equipments (NTEs). The NTEs may be simple connectors, intelligent loopback devices or more sophisticated equipment. Both the national and international portions of the leased circuit may be provided by more than one NO.
|
| 320 |
+
|
| 321 |
+
The TTPs may be owned, operated and maintained by the NO/SP or the Customer. Where the Customer owns the TTPs, the POH shall be made available to the NO/SP for operation and maintenance purposes. The detailed use of the POH is for further study. The interface to the Customer may be an electrical interface as described in ITU-T G.703 [2] and ITU-T G.707 [3], or an optical interface as described in ITU-T G.707 [3] and ITU-T G.957 [19].
|
| 322 |
+
|
| 323 |
+
The SDH leased circuit shall employ the frame structures, POH and SOH defined in ITU-T G.707 [3] and is transported over an SDH network at varying STM-N levels of the SDH, or over a mixed SDH/PDH network. The SDH leased circuit may be provisioned manually or semi-automatically via TMN facilities as described in ITU-T M.3208.1 [56]. Before provisioning, the parties concerned shall agree on the payload structure at the interfaces and the use of the POH and SOH. DCEs connected to the leased circuit may have test loopback facilities as described in ITU-T V.54 [64] or ITU-T X.150 [65].
|
| 324 |
+
|
| 325 |
+
The path overhead for the leased circuit should be configured as specified in ITU-T G.707. In the case of a VC3, the signal label byte C2 should be set as specified in 9.3.1.3/G.707. In the case of a VC12, the V5 byte should be set as specified in 9.3.2.1/G.707.
|
| 326 |
+
|
| 327 |
+
NOTE – Some aspects of the POH need further clarification e.g. the case of LO-TCM requires valid J2, N2 and V5 bytes.
|
| 328 |
+
|
| 329 |
+
## 5.1 Leased circuit configuration
|
| 330 |
+
|
| 331 |
+
Figure 1 shows the basic constituent parts of an international point-to-point leased circuit without showing the SDH equipments that support the leased circuit.
|
| 332 |
+
|
| 333 |
+

|
| 334 |
+
|
| 335 |
+
Figure 1/M.1301 – Constituent parts of an international leased circuit. The diagram shows a linear sequence of nodes: CP, TNC, TIC, TIC, TNC, CP. Horizontal double-headed arrows indicate three segments: 'National portion' between the first CP and the first TIC, 'International portion' between the two TICs, and 'National portion' between the second TIC and the second CP. A longer double-headed arrow labeled 'International link' and 'International leased circuit' spans between the two TNCs. A legend at the bottom left defines CP as Customer's Premises, TIC as Terminal International Centre, and TNC as Terminal National Centre. The code T0414760-00 is in the bottom right.
|
| 336 |
+
|
| 337 |
+
**Figure 1/M.1301 – Constituent parts of an international leased circuit**
|
| 338 |
+
|
| 339 |
+
The national portions of the leased circuit may in fact cross more than one NO and the responsibility for providing the circuit may be a SP who owns only part or even none of the network equipment supporting the circuit. The SP will negotiate with NOs (providers) to assign network paths as required, and with the Customer regarding visits to their premises for any installation of terminal equipment and testing of the circuit.
|
| 340 |
+
|
| 341 |
+
An expanded version of Figure 1 based on Figure III.1/G.826 [14] shows a leased circuit existing between two NTEs via various International Gateways (IGs) in a multi-operator network, but the end-to-end digital path existing between two Terminal Equipments (TEs) includes a private network(s) as shown below in Figure 2:
|
| 342 |
+
|
| 343 |
+

|
| 344 |
+
|
| 345 |
+
Figure 2/M.1301 – Constituent parts of an SDH leased circuit and digital path. The diagram shows a sequence of nodes: TE, NTE, IG, IG, IG, IG, NTE, TE. Horizontal double-headed arrows indicate: 'International portion' between the first NTE and the last NTE; 'Leased circuit' between the first IG and the last IG; and 'End-to-end digital path' between the two TEs. Vertical lines from the last NTE to the final TE are labeled 'National portion' and 'Private network'. A legend at the bottom left defines IG as International Gateway, NTE as Network Terminal Equipment, and TE as Terminal Equipment. The code T0414770-00 is in the bottom right.
|
| 346 |
+
|
| 347 |
+
**Figure 2/M.1301 – Constituent parts of an SDH leased circuit and digital path**
|
| 348 |
+
|
| 349 |
+
The portion between the NTE and TE may be outside the NO's control, provided by a private network over which a public NO has no control. Thus in the case of SDH leased circuits, end-to-end performance objectives cover only the portion situated between the two NTEs.
|
| 350 |
+
|
| 351 |
+
Five types of SDH leased circuits can be identified:
|
| 352 |
+
|
| 353 |
+
- 1) NO to NO circuit, where the NOs terminate the POH. This includes mixed SDH/SONET interworking where the POH and SOH is terminated and rebuilt, e.g. VC-3 to STS-1;
|
| 354 |
+
|
| 355 |
+
- 2) end-user Customer to end-user Customer circuit where the POH is terminated at the end-user Customer's premises, but there is a facility for communication between the end-user Customer's terminal equipment. In this case the NOs transporting the circuit act as transit operators;
|
| 356 |
+
- 3) end-user Customer to NO circuit where one NO hands off the leased circuit to another NO. This is a subset of type 2) where one NO is acting as a Customer of another NO, and again could involve SDH/SONET interworking;
|
| 357 |
+
- 4) mixed SDH/PDH leased circuit where the traffic is accepted/delivered at one end in a PDH interface and at the other end buried in a SDH interface e.g. 2 Mbit/s PDH to STM-1 where the Customer has access to 1920 kbit/s in PDH at one end and VC-12 in SDH at the other end;
|
| 358 |
+
- 5) PDH leased circuit with SDH presentation to the Customer.
|
| 359 |
+
|
| 360 |
+
Other types of SDH leased circuits include point-to-multipoint circuits, dedicated semi-permanent or reconfigurable circuits (with time-of-day switching) as described in ITU-T M.3208.1 [56], and unidirectional circuits (e.g. video broadcast circuits).
|
| 361 |
+
|
| 362 |
+
## 5.2 Network interfaces
|
| 363 |
+
|
| 364 |
+
Most (if not all) SDH leased circuits will employ SDH equipment and transmission systems to provide a synchronous digital path between the end points of the circuit (apart from types 4) and 5) where PDH equipment will be at one or both ends of the circuit). This may include sitting an SDH Add-Drop Multiplexer (ADM) or Terminal Multiplexer (TM) on the CP at the end of the access network transport link. The location of the interface (NTE) to the Customer depends as much on regulatory constraints as it does on technical decisions.
|
| 365 |
+
|
| 366 |
+
ITU-T G.707 [3] and ITU-T G.708 [4] define the Network Node Interfaces (NNIs) for SDH that apply to both electrical and optical interfaces. It is clear from existing equipment practice that both electrical and optical interfaces are being offered to Customers as desired.
|
| 367 |
+
|
| 368 |
+
The User Network Interfaces (UNIs) already being offered to users cover a broad range from the so-called "ATM25" interface at 25.6 Mbit/s to STM-4 (OC-12) at 622 Mbit/s and even STM-16 (OC-48) at 2.4 Gbit/s. The main Recommendations covering these are summarized below:
|
| 369 |
+
|
| 370 |
+
- I.432.1 [20] – General characteristics of B-ISDN User-Network Interfaces physical layer;
|
| 371 |
+
- I.432.2 [21] – 155 520 kbit/s and 622 080 kbit/s B-ISDN UNI operation;
|
| 372 |
+
- I.432.3 [22] – 1544 kbit/s and 2048 kbit/s B-ISDN UNI operation;
|
| 373 |
+
- I.432.4 [23] – 51 840 kbit/s B-ISDN UNI operation;
|
| 374 |
+
- I.432.5 [24] – 25 600 kbit/s B-ISDN UNI operation;
|
| 375 |
+
- G.703 [2] – Physical/electrical characteristics of hierarchical digital interfaces;
|
| 376 |
+
- G.707/Y.1322 [3] – Network Node Interface (NNI) for the SDH;
|
| 377 |
+
- G.708 [4] – Bit rates and multiplexing structures for sub-STM-0 interfaces;
|
| 378 |
+
- G.957 [19] – Optical interfaces for equipments and systems relating to the SDH.
|
| 379 |
+
|
| 380 |
+
Concatenated versions of SDH bandwidths are also in use to provide very high bandwidth transmission "pipes" for ATM and IP. This concatenation may be contiguous within one SDH signal or virtual using a number of SDH signals. When using virtual concatenation, differential delays need to be carefully controlled and some kind of frame reference signal is required.
|
| 381 |
+
|
| 382 |
+
## **5.3 Timing and network synchronization**
|
| 383 |
+
|
| 384 |
+
The timing feed at each end of an international SDH leased circuit should be derived from a primary reference clock operating in accordance with ITU-T G.811 [8]. In general, the SDH leased circuit timing will be derived from the SDH network supporting it and not from the Customer's equipment. The network clock is normally used to drive the Customer's equipment. If the leased circuit is provided by multiple NOs, agreement must be reached on the source of the master clock or the provision of appropriate facilities to take account of timing differences.
|
| 385 |
+
|
| 386 |
+
## **5.4 Designations**
|
| 387 |
+
|
| 388 |
+
The form of designations for international SDH leased circuits will be described in ITU-T M.1400 [38]. The details of this are for further study.
|
| 389 |
+
|
| 390 |
+
## **5.5 Performance**
|
| 391 |
+
|
| 392 |
+
Three key areas of performance need to be checked when bringing-into-service or maintaining an SDH leased circuit. These are:
|
| 393 |
+
|
| 394 |
+
- error performance;
|
| 395 |
+
- timing performance;
|
| 396 |
+
- availability performance.
|
| 397 |
+
|
| 398 |
+
ITU-T M.2101 [49] defines the error performance limits and allocation of the SDH digital trails which support SDH leased circuits. ITU-T G.811 [8], ITU-T G.812 [9], ITU-T G.822 [10], ITU-T G.823 [11], ITU-T G.824 [12] and ITU-T G.825 [13] define the timing performance which should be maintained. Delay performance is for further study. ITU-T G.827 [15] defines the physical layer availability for a digital path.
|
| 399 |
+
|
| 400 |
+
# **6 Operational procedures**
|
| 401 |
+
|
| 402 |
+
ITU-T M.2110 [51] covers the setting up and Bringing-Into-Service (BIS) of international digital paths. Maintenance issues are covered in ITU-T M.2120 [52]. General operational procedures for locating and clearing transmission faults are covered in ITU-T M.2130 [53]. The performance limits for bringing-into-service and maintenance of international SDH paths and multiplex sections are defined in ITU-T M.2101 [49].
|
| 403 |
+
|
| 404 |
+
The BIS (provisioning) of SDH leased circuits is increasingly based on the TMN approach to network and service management since the SDH transmission equipment that supports the leased circuits consists of highly intelligent software-intensive Network Elements (NEs) that are managed by SDH Element Management Systems (EMSs) and higher level Network Management Systems (NMSs). This includes the exchange of information electronically across TMN Q and X interfaces for management purposes, both within one NO/SP, and between NO/SPs since these circuits will often cross a number of NO/SP jurisdictions. ITU-T M.3208.1 [56], ITU-T M.3208.2 [57] and ITU-T M.3208.3 [58] define TMN management services for configurable and reconfigurable leased circuits within a multi-operator environment.
|
| 405 |
+
|
| 406 |
+
Also, the maintenance (fault reporting, localization and testing) of these SDH leased circuits will be increasingly based on remotely managed test resources from a Network Management Centre (NMC) or Network Operations Centre (NOC). These test resources may be a mixture of built-in capabilities within the network equipment (e.g. POH, SOH, TCM, etc.) or remote test heads attached at strategic network access points e.g. a Digital Cross-connect System (DCS) used to configure the circuits. The following subclauses outline the procedures for Fault, Configuration, Administration and Performance Management, which are four of the key TMN managed functional areas defined in ITU-T M.3010 [55] and ITU-T M.3400 [61]. A new Recommendation in the M.3208.x-series is being drafted on TMN test management.
|
| 407 |
+
|
| 408 |
+
## 6.1 Control and sub-control stations
|
| 409 |
+
|
| 410 |
+
A dual control or a control and sub-control relationship shall be agreed at the BIS stage. Where a control and sub-control relationship exists, responsibilities will be as described in ITU-T M.80 [28], ITU-T M.90 [29], ITU-T M.1012 [30] and ITU-T M.1013 [31]. However, in order to achieve the fastest possible response times for maintenance activities on behalf of Customers, it is acceptable for both terminal stations of an international SDH leased circuit to assume control station status. It is essential however for the control stations involved to develop effective mechanisms and procedures for coordinating maintenance activities, and that they inform each other of specific maintenance actions as rapidly as possible to avoid confusion. TMN management systems operating over X interfaces between NO/SPs can greatly facilitate this process.
|
| 411 |
+
|
| 412 |
+
It is possible for a third-party centre to be designated as the control station. In this situation the leased circuit may not be routed via this centre, nor need this centre be situated in a terminal or transit country of the leased circuit. Clearly, close co-operation is required between the SP and the NOs providing the leased circuit. In some cases, the international SDH leased circuit may be provided by one NO/SP acting as a "one stop shop", i.e. a primary SP (sometimes called a "retailer") who sub-contracts other parts of the SDH leased circuit to another NO to carry on their behalf (sometimes called a "wholesaler"). One or more NOs involved with providing the SDH trail may use cooperating network/service management systems communicating via TMN X interfaces (see ITU-T M.3320 [59]) to provision and maintain the SDH leased circuit (see ITU-T M.3208.1 [56], ITU-T M.3208.2 [57] and ITU-T M.3208.3 [58]).
|
| 413 |
+
|
| 414 |
+
## 6.2 BIS procedures
|
| 415 |
+
|
| 416 |
+
The basic BIS procedures for SDH leased circuits should be similar to those defined in existing ITU-T M.1370 [34], ITU-T M.1380 [36] and ITU-T M.2110 [51]. These include the preliminary exchange of information about the leased circuit configuration and interfacing, designation and routing, bringing-into-service schedule and coordination between stations, contact personnel details, details of any special maintenance or fault reporting arrangements, performance limits and test equipment to be used, and measurements against limits (see ITU-T M.80 [28], ITU-T M.90 [29], ITU-T M.1012 [30], ITU-T M.1013 [31], ITU-T M.1045 [32], ITU-T M.1400 [38] and ITU-T M.1510 [39]). The test equipment used should conform to ITU-T O.172 [62] and ITU-T O.181 [63].
|
| 417 |
+
|
| 418 |
+
Checks of individual SDH network equipment comprising the circuit should be performed. This should include confirming the interworking of alarms, e.g. Alarm Indication Signal (AIS) and, ideally, simulated error transmissions to check other alarm operations at both local and distant ends. Specific checks of POH, SOH and payload structure should be made to verify the agreed format. Note that full end-to-end checks of POH cannot be made until the VC-n path is equipped. This may require the Customer to connect their CPE to the SDH interface. An unequipped VC-n path may create spurious alarms and inhibit protection switching actions.
|
| 419 |
+
|
| 420 |
+
BIS tests should ideally include periods of normal industrial activity to be representative of typical network conditions. Performance limits of ES, SES and BBE counts should be met simultaneously for the test results to be considered acceptable. Typical performance objectives, allocations and limits are given in ITU-T M.2101 [49] for SDH digital paths and multiplex sections and in ITU-T M.1340 [33] for mixed PDH/SDH leased circuits, however routed. The possible development and application of performance objectives for other parameters such as transmission delay, timing jitter, etc., are for further study. All test results obtained during the BIS tests should be retained as a "fingerprint" of the SDH leased circuit for possible future reference during maintenance activities.
|
| 421 |
+
|
| 422 |
+
In the past PDH world, to reflect operational requirements for out-of-service testing, test durations of 24 hours, of 1 hour and of 15 minutes were often used. In an all-SDH transport environment with inherent ISM capabilities, much shorter provisioning and BIS testing time-scales can be achieved. With regard to bringing-into-service testing, the 1-month evaluation period suggested in
|
| 423 |
+
|
| 424 |
+
ITU-T G.826 [14] and ITU-T G.828 [16] is not realistic in an operational environment (see ITU-T M.2101). A shorter test duration is required, particularly with strong commercial pressures to put a leased circuit into service or restore it after repair. However, it must be recognized that test results obtained over 24 hours or less are inherently less reliable.
|
| 425 |
+
|
| 426 |
+
It should be noted then that a 24-hour or less test duration can be expected to give a particularly reliable indication of transmission performance. National circuit portions and international circuit portions may be set up and tested simultaneously or consecutively. However, careful harmonization of these procedures is required to ensure overall end-to-end performance is acceptable.
|
| 427 |
+
|
| 428 |
+
### **6.2.1 Section-by-section testing and In-Service Monitoring (ISM)**
|
| 429 |
+
|
| 430 |
+
BIS procedures will increasingly use TMN and ISM techniques, but end-to-end tests of the overall leased circuit may require appropriate personnel to be present at the Customer's premises in the two end points. The cooperation of staff, e.g. at the TICs/IGs or Customer Care Centre may also be required to overcome language or technical difficulties where the leased circuit crosses NO/SP and/or international boundaries. It may be easier to perform BIS tests on a section-by-section basis although an overall end-to-end check must be performed. One of the major issues for SDH leased circuits is that the SDH transport network supporting them will often be optical fibre transmission systems and there may not be readily available test access points in transport network sections. New SDH leased circuits may be added to existing higher-order transport network bearers (see 6.2.3). The use of ISM capabilities built into the SDH NEs coupled to EMSs and NMSs can greatly assist.
|
| 431 |
+
|
| 432 |
+
### **6.2.2 National circuit portions**
|
| 433 |
+
|
| 434 |
+
Before setting up the national circuit portions, suitable performance limits for the national circuit portions should be developed and exchanged between the Network Operators/Service Providers involved, always ensuring that the overall end-to-end performance can be achieved.
|
| 435 |
+
|
| 436 |
+
### **6.2.3 International circuit portions**
|
| 437 |
+
|
| 438 |
+
Using the in-service performance monitoring available, and if the error performance of the supporting transport system is acceptable, all new circuits should be tested for 15 minutes.
|
| 439 |
+
|
| 440 |
+
In the case where a number of circuits using the same higher-order transport system are brought into service at the same time, and in-service performance monitoring is not available, the first circuit should be tested for 24 hours, and the remaining circuits could be tested for 15 minutes each. Any portions of the circuit, which are not supported by the higher-order transport system, should be tested for 24 hours.
|
| 441 |
+
|
| 442 |
+
The performance limits given in ITU-T M.1340 [33] should be met for any mixed PDH/SDH leased circuits. Performance limits for SDH leased circuits are given in ITU-T M.2101 [49]. Where there is little confidence regarding the capabilities of a particular international transport system, or where the short duration test objectives were not met, a 24-hour test should be performed using the limits given in ITU-T M.1340 [33] or ITU-T M.2101 [49] as appropriate. In the event that the 24-hour limits are not met, Network Operators/Service Providers should agree to an appropriate course of action.
|
| 443 |
+
|
| 444 |
+
Where the international circuit portion extends significantly beyond the tributary interfaces of a particular international higher-order transport system (e.g. where a transit routing involves the interconnection of two international SDH systems) additional tests may be required. NOs/SPs should ensure that all parts of the international circuit portion are fully tested. Suitable additional limits should be agreed between the NOs/SPs involved. Consistency with ITU-T M.1340 [33] and ITU-T M.2101 [49] should be sought wherever possible.
|
| 445 |
+
|
| 446 |
+
### **6.2.4 BIS using an alternative international link**
|
| 447 |
+
|
| 448 |
+
If any portion of the link, which would normally be used to carry the international leased circuit, is restored onto an alternative route before BIS testing is commenced, or during BIS testing, then testing may proceed, or continue, if the following three criteria are met:
|
| 449 |
+
|
| 450 |
+
- 1) The performance of the alternative link is known to be acceptable;
|
| 451 |
+
- 2) The alternative link uses the same transmission media as the original link;
|
| 452 |
+
- 3) The length of the alternative link is not substantially different from the original link.
|
| 453 |
+
|
| 454 |
+
If these criteria are not met, then testing should be postponed, or halted, until the original link is returned to service.
|
| 455 |
+
|
| 456 |
+
If a single unavailability event occurs during the BIS test, and the cause of this event is precisely known and not recurrent, then this event should be ignored in the test results.
|
| 457 |
+
|
| 458 |
+
### **6.2.5 End-to-end test**
|
| 459 |
+
|
| 460 |
+
It will normally be required to perform an end-to-end test to confirm overall integrity and stability. A 24-hour test duration is recommended. Test limits should include allowances for the international and the two national circuit portions. NOs/SPs should pay particular attention to highlighting any problems that may be associated with the interworking of separately timed networks, especially for the first circuit provision that uses a particular equipment configuration. In particular, the jitter/wander performance requirements of ITU-T G.823 [11], ITU-T G.824 [12] and ITU-T G.825 [13] should be respected as appropriate to the leased circuit and supporting transport network.
|
| 461 |
+
|
| 462 |
+
Depending upon the loopback capabilities provided by the NTEs at the Customer's premises, it may be possible to perform end-to-end tests, combined with ISM, from intermediate points within the network (e.g. at TICs).
|
| 463 |
+
|
| 464 |
+
Where loop tests are employed it is proposed that no special additional performance allowance is made (i.e. doubling of limits is not recommended).
|
| 465 |
+
|
| 466 |
+
### **6.2.6 Alternative end-to-end test**
|
| 467 |
+
|
| 468 |
+
If NOs/SPs agree, based upon experience of similar network conditions, and in-service performance monitoring is available on the entire international transport system, a 2-hour end-to-end monitoring test may be performed. In this case, the BIS procedure is as follows:
|
| 469 |
+
|
| 470 |
+
- 1) The national circuit portion is brought into service according to existing national procedures;
|
| 471 |
+
- 2) No international circuit portion test is carried out, as this portion has already been tested according to the procedures of ITU-T M.1370 [34] or ITU-T M.2110 [51] and in-service performance monitoring is being used to ensure that the performance of the higher-order transport system is acceptable;
|
| 472 |
+
- 3) For wholly SDH-routed circuits using a continuous POH, an end-to-end monitoring test of two hours is performed to verify the cross-connection capabilities of any digital cross-connect equipment used to configure the leased circuit. This test may be performed to a loopback at one or both ends. The performance limits for this test are given in Table 1/M.1340 [33] for mixed SDH/PDH leased circuits and in ITU-T M.2101 [49] for SDH-only leased circuits. There should be no clock slips or periods of unavailability during this test. If these conditions cannot be met, then the 24-hour test, as described above, should be carried out. For mixed SDH/PDH transported circuits, it may not be possible to perform a full end-to-end test, especially in the case of CPE owned by the end-user. In this case, a partial end-to-end test combined with ISM should be performed.
|
| 473 |
+
|
| 474 |
+
As mentioned in 6.2.5, Network Operators/Service Providers should pay particular attention to highlighting any problems that may be associated with the interworking of separately timed
|
| 475 |
+
|
| 476 |
+
networks, as these may not be evident from a 2-hour test. Where the performance limits are not met, fault localization should be performed and the faults rectified.
|
| 477 |
+
|
| 478 |
+
## **6.3 Maintenance procedures**
|
| 479 |
+
|
| 480 |
+
The basic maintenance procedures for SDH leased circuits should be similar to those defined in existing ITU-T M.1375 [35], ITU-T M.1385 [37], ITU-T M.2120 [52] and ITU-T M.2130 [53]. These include fault reporting, sectionalization, localization and restoration procedures, with appropriate exchange of information between NOs/SPs and with Customers. ISM facilities should be used whenever possible for fault sectionalization, localization and diagnosis. Further information on fault management is contained in Annex A.
|
| 481 |
+
|
| 482 |
+
It should be noted that, for more extensive measurements involving intrusive testing, the circuit will be interrupted and the service to the Customer affected. This in turn may impact the SLA/Contract and result in penalties or rebates. Maintenance tests should therefore be kept as short as possible to avoid significantly extending out-of-service time. As with BIS procedures, any test equipment used should conform to ITU-T O.172 [62] and ITU-T O.181 [63]. Maintenance performance thresholds and procedures for protection of SDH leased circuits should in general follow the same principles defined in ITU-T M.20 [25], ITU-T M.34 [26], ITU-T M.2100 [48], ITU-T M.2101 [49], ITU-T M.2102 [50], ITU-T M.2120 [52] and ITU-T M.2130 [53].
|
| 483 |
+
|
| 484 |
+
Round-the-clock "help-desks" and TMN modules enable test and monitoring to be centralized and activated, for improved Customer service. For example, prompt information to the Customer about the fault condition detected and countermeasures planned, direct intervention of suitable technical teams, etc. can be driven from a Service Management System (SMS) situated in a Customer Care Centre and/or NMS situated in a NOC or NMC. The aim is to always respect the SLA contractual commitments to the Customers.
|
| 485 |
+
|
| 486 |
+
### **6.3.1 Performance monitoring and data collection**
|
| 487 |
+
|
| 488 |
+
Performance data is normally collected in terms of event counts associated with the performance parameters indicated in ITU-T G.826 [14], ITU-T G.828 [16], ITU-T M.2100 [48] and ITU-T M.2101 [49] using ISM. The performance primitives (anomalies and defects) are processed by the SDH NEs into performance parameters and accumulated over 15-minute and 24-hour intervals. The current and historical performance data is time stamped and stored in performance registers which are then interrogated by the Operations System (OS) managing the NEs and reported upwards to the NMS and SMS managing the SDH leased circuit service supported by the SDH network. Performance events are collected and stored independently for each direction of transmission of the circuit. The SDH path is monitored using the BIP-8 code with even parity provided in the POH byte B3. Additional monitoring capability for high bit rate VC-4-Xc trails is under study. Performance event counts are inhibited during periods of unavailability as defined in ITU-T G.826 [14], ITU-T G.828 [16] and ITU-T G.827 [15]. Any change of availability state is also time stamped and recorded in the performance registers. Full details of performance monitoring by SDH NEs are given in ITU-T G.707 [3], ITU-T G.783 [5], ITU-T G.784 [6] and ITU-T M.2101 [49]. Further information on transport network event correlation and handling of performance data can be found in ITU-T M.2140 [54].
|
| 489 |
+
|
| 490 |
+
Where the SDH leased circuit crosses a number of SDH sections, performance monitoring may include Tandem Connection Monitoring (TCM) using the B3 bytes in the VC-n overhead of each of the higher-order VCs that make up the Tandem Connection (TC) as described in ITU-T G.707 [3]. The TC also has a 32 kbit/s data link provided by part of the N1 byte in the first VC-n of the TC, which uses a LAPD message protocol to convey trace, status and performance report information.
|
| 491 |
+
|
| 492 |
+
As stated earlier, regardless of who owns the CPE, the SDH POH specified in ITU-T G.707 [3] shall be used by the SDH digital path and made available at suitable monitoring points along the route. In the case of an end-Customer or another operator owning the POH terminating equipment, it may not
|
| 493 |
+
|
| 494 |
+
be possible for one operator to access the POH at the ends of the digital path. However, the POH provided includes remote anomaly and defect information seen by the POH terminating equipment and returned to the distant end. Thus it is possible to assess the end-to-end error performance of the complete bidirectional path from one access point within the path i.e. from the user's viewpoint. However, it should be noted that not all VC-n SDH paths contained within a higher layer SDH signal can be monitored simultaneously on some SDH equipment.
|
| 495 |
+
|
| 496 |
+
### **6.3.2 Performance history, thresholding and reporting**
|
| 497 |
+
|
| 498 |
+
Performance history data are necessary to assess the recent performance of SDH leased circuits and transmission systems. Such information can be used to sectionalize faults and locate sources of intermittent errors. Performance monitoring thresholds may be set in the SDH NEs by the OS and threshold crossings detected and notifications generated as described in ITU-T M.20 [25], ITU-T M.34 [26], ITU-T M.2101 [49], ITU-T M.2102 [50], ITU-T M.2120 [52] and ITU-T M.2140 [54]. These notifications are normally generated autonomously.
|
| 499 |
+
|
| 500 |
+
When thresholds of unacceptable or degraded performance levels are reached, maintenance action should be initiated independently of the performance measurement. A degraded performance result can be used to generate a fault report (commonly known as a "trouble ticket") to alert maintenance staff that SLA/Contract guarantees are not being met and action needs to be taken. This may include alerting the service billing system that a Customer is due for a discount or rebate. Other thresholds may be used for maintenance and longer-term quality analysis. The OS will use real time processing to assign maintenance priorities to these threshold crossings and information, using the performance supervision process described in ITU-T M.20 [25].
|
| 501 |
+
|
| 502 |
+
In general, two types of thresholds are used depending on the accumulation period for anomalies and defects. 15-minute monitoring periods with thresholds of ES, SES and BBE counts are used to detect transitions to or from unacceptable performance. 24-hour monitoring periods with thresholds of ES, SES and BBE counts are used to detect transitions to degraded performance. The thresholds are usually programmable from the OS to suit specific operating requirements. This may vary with importance of the circuit(s) supported by the path, transport technology employed or SLA/Contract values agreed with a Customer. Further information on performance thresholding is given in ITU-T M.2101 [49], ITU-T M.2102 [50], ITU-T M.2120 [52] and ITU-T M.2140 [54].
|
| 503 |
+
|
| 504 |
+
### **6.3.3 Maintenance intervention tests**
|
| 505 |
+
|
| 506 |
+
Maintenance intervention tests should be kept as short as possible to avoid significantly extending the out-of-service time, and should be of a duration appropriate to the nature of the fault report received. It is assumed that, for maintenance intervention tests, the circuit shall only be withdrawn from service with the Customer's agreement, unless the circuit has completely failed. Where the leased circuit uses only part of the SDH transmission equipment channels, it may be possible to connect test equipment to monitor the performance of spare capacity. The data from such tests may provide a useful indication of the overall performance of the SDH transport network supporting the leased circuit.
|
| 507 |
+
|
| 508 |
+
The duration of maintenance intervention tests will be dependent upon the nature of the fault report that has been received. Where a fault report suggests that the leased circuit has failed completely, a short test of basic integrity should be performed. Such tests, which are interpreted on a simple pass or fail basis, should normally be limited to a duration of 15 minutes with no SESs being observed.
|
| 509 |
+
|
| 510 |
+
Where a fault report suggests that there has been an overall degradation of service, but that the circuit has not failed completely, a longer duration test will be appropriate. Where a longer duration test is to be performed, NO/SPs should agree a suitable test date and time with the Customer. The Customer may wish to retain access to the circuit until a more convenient time when a substantial out-of-service period may be more tolerable. When a 24-hour test is performed, NO/SPs should use the same limits that were developed for the initial BIS tests.
|
| 511 |
+
|
| 512 |
+
### **6.3.4 Test configurations**
|
| 513 |
+
|
| 514 |
+
Several test measurement configurations are possible (see Figure 1/M.2110 [51] for guidance). Any loopback facilities that may be available should be used when appropriate. DCEs connected to the leased circuits may have test loopback facilities as described in ITU-T V.54 [64] and ITU-T X.150 [65]. Care must be taken to avoid the simultaneous operation of multiple loopbacks on a particular circuit. Once the need for a loopback no longer exists, then care should be taken to ensure that it is removed.
|
| 515 |
+
|
| 516 |
+
For digital loops, the continuity of a digital leased circuit can be tested, even through to the distant Customer's installation, if the specifications are compatible between NO/SPs. However, this requires the agreement of the NO/SPs and, in any case, of the Customer, since their circuit cannot be used at that time. In some networks, control of these loopbacks may be carried out using the TMN management capabilities. The details of these loopbacks for SDH are for further study.
|
| 517 |
+
|
| 518 |
+
### **6.3.5 Test access at DCS equipment**
|
| 519 |
+
|
| 520 |
+
An increasing number of transmission systems and circuits are configured using DCS equipment within transmission stations. These equipments are used to switch faulty digital paths over to standby paths when necessary. They also often provide the capability to divert transmission systems and circuits to test ports to which test equipment can be connected and used to measure performance and diagnose faults. Furthermore, this test equipment may be remotely controlled, possibly by the same management system that controls the DCS equipment. In any event, control of the two must be carefully synchronized. In some cases, simultaneous multiple access to test equipment (a "remote test head") is possible by multiple operational staff as multiple user sessions, with scripted test sequences.
|
| 521 |
+
|
| 522 |
+
It is desirable that DCS equipment is capable of providing monitoring of selected digital paths before taking the path out of service. This allows in-service performance assessment and/or confirmation that a fault exists before breaking the path. Most DCS equipment provides both a "monitor" and a "split and terminate" functionality on the test ports. While the digital path is being monitored in-service, no interruption is experienced. Once a fault has been confirmed, the faulty path is split and the fault diagnosed. SDH DCS equipment is now commonplace in SDH transport networks, but SDH ADMs may also be used for test access. DCS and ADM equipment itself may be a useful source of fault and performance information from the built-in ISM.
|
| 523 |
+
|
| 524 |
+
### **6.3.6 Returning-to-service tests**
|
| 525 |
+
|
| 526 |
+
Returning-to-service tests should be of a duration that is appropriate to the nature of fault that has been cleared and should include observation of any network alarm facilities that may be available. Where a fault has caused a general degradation of service, a returning-to-service test with a short duration (e.g. 15 minutes) may not be appropriate and a longer-term test (e.g. 1 hour or 24 hours) should be used.
|
| 527 |
+
|
| 528 |
+
Following corrective maintenance, the Customer should be asked to confirm that their application is functioning correctly. Only then can the service be said to be restored. When a fault is cleared, appropriate clearance information should be passed to any control or sub-control stations or customer care centres that have been involved with initial fault reporting and localization.
|
| 529 |
+
|
| 530 |
+
#### **6.3.7 Planned maintenance**
|
| 531 |
+
|
| 532 |
+
In cases of planned maintenance on the NO/SP's installations – transmission equipment, power equipment, cabling, etc. – which would cause or risk some performance degradation or unavailability of the digital leased circuit, reference is to be made to ITU-T M.1540 [46] and the terms of the SLA/Contract with the Customer.
|
| 533 |
+
|
| 534 |
+
# 7 Maintenance records
|
| 535 |
+
|
| 536 |
+
NO/SPs should ensure that up-to-date information is held on file to assist maintenance activities. Clause 6/M.1370 [34] and clause 6/M.1380 [36] provide details of information that should be available for PDH supporting systems and leased circuits respectively. The same kind of information should be kept for SDH leased circuits and supporting transport systems, together with any POH-specific or SOH-specific information in use by the circuit. In addition, a record should be kept of any particular maintenance agreement with the Customer, including for example a SLA/Contract. See also ITU-T M.1510 [39], ITU-T M.1530 [41], ITU-T M.1532 [42], ITU-T M.1535 [43], ITU-T M.1537 [44] and ITU-T M.1539 [45] for further information. Maintenance staff should refer to such agreements when dealing with a fault reported by the Customer. During maintenance operations, reference should be made to previous test results that are applicable to the circuit under test. Original BIS test results should be available for all leased circuits.
|
| 537 |
+
|
| 538 |
+
Existing maintenance records should provide details of test equipment, test access points, test patterns and performance limits that are to be used. Test results from previous maintenance actions on all portions of the leased circuit may provide a useful indication of the overall performance of the SDH transport network supporting the leased circuit. The obligations set out in the leased circuit maintenance contract with the Customer, for example the SLA will be registered, and maintenance staff involved will refer to them whenever they are called in following a fault report by the Customer. In a TMN environment, this information will normally be available on a technician's client terminal connected to the SMS and/or NMS. NOs/SPs should also keep a log of circuit interruptions, over an adequate period, with a view to meeting any claims from Customers.
|
| 539 |
+
|
| 540 |
+
# 8 Protection and reserve arrangements
|
| 541 |
+
|
| 542 |
+
SDH leased circuits will normally be routed via SDH transmission networks employing network and/or sub-network protection e.g. in SDH rings. In some cases, Customers may require or NOs/SPs may decide to also provide alternate routing either at a physical or at a logical level through the network. ITU-T G.841 [17], ITU-T G.842 [18], ITU-T M.2102 [50] and ITU-T M.2130 [53] describe SDH network protection and restoration procedures.
|
| 543 |
+
|
| 544 |
+
Some NOs/SPs may find it useful to nominate one or more reserve SDH transmission links for restoration purposes. This should be decided by bilateral agreement when designing and provisioning the SDH leased circuit, taking into account its importance and contracted availability normally specified in the SLA. Such reserve links or circuits must be set up or lined up to meet the requirements of the normal SDH leased circuit and, wherever possible, should follow a different route from the normal route of the leased circuit. Further information is given in ITU-T M.2130 [53].
|
| 545 |
+
|
| 546 |
+
# ANNEX A
|
| 547 |
+
|
| 548 |
+
## Fault management
|
| 549 |
+
|
| 550 |
+
### A.1 Initial reception of a fault report
|
| 551 |
+
|
| 552 |
+
In general, fault information relating to an SDH leased circuit can originate from four sources:
|
| 553 |
+
|
| 554 |
+
- a Customer trouble report (due to the failure or poor performance of the SDH leased circuit);
|
| 555 |
+
- a lower-order system operator (due to the failure or poor performance of a lower-order system that is supported as a channel or VC-n by the SDH leased circuit);
|
| 556 |
+
- the SDH leased circuit itself (through network alarms or distant NO);
|
| 557 |
+
- a network or higher-order system operator (with notification of the failure or poor performance of the higher-order network that supports this SDH leased circuit or recognition of a transmit problem from this SDH leased circuit).
|
| 558 |
+
|
| 559 |
+
Trouble reports from Customers and information sent to them may be transmitted over an X interface (see ITU-T M.3320 [59]) as a "trouble ticket" as defined in ITU-T X.790 [66]. This information may include performance reports on how a Customer's leased circuit is performing, and may be part of the SLA within the service contract agreed with the Customer. Note that the Customer may be another NO (wholesaler) providing part of the whole of the leased circuit to a SP (retailer) who in turn supplies the service to an end-user Customer.
|
| 560 |
+
|
| 561 |
+
### A.2 Fault information exchange
|
| 562 |
+
|
| 563 |
+
When a fault report is received (e.g. a trouble report from a Customer or a connecting NO) the following information should be obtained<sup>2</sup>:
|
| 564 |
+
|
| 565 |
+
- name, title and contact details for the person reporting the fault;
|
| 566 |
+
- time of fault report, recorded in UTC;
|
| 567 |
+
- designation of the faulty circuit (see ITU-T M.1400 [38]);
|
| 568 |
+
- symptoms of the fault;
|
| 569 |
+
- the observed duration of the fault prior to a report being made;
|
| 570 |
+
- any associated information that may assist with fault clearance.
|
| 571 |
+
|
| 572 |
+
It is assumed that the Customer has carried out all the requisite checks using their own application's monitoring and control system, so as to determine that the fault stems from the leased circuit for which the NO(s) are responsible.
|
| 573 |
+
|
| 574 |
+
Standardized exchange of information procedures are described in the M.15xx-series Recommendations. ITU-T M.1520 [40] defines the standardized information exchange between NOs/SPs. It summarizes the relevant M-series and E-series Recommendations requiring information exchange between NOs/SPs. ITU-T M.1535 [43] defines the principles for maintenance information to be exchanged at the Customer contact point. ITU-T M.1537 [44] defines the basic maintenance information to be exchanged with a Customer. ITU-T M.1539 [45] contains information to be exchanged at the Customer contact point. ITU-T M.1532 [42] defines a network maintenance service performance agreement that may exist between a NO/SP and the Customer.
|
| 575 |
+
|
| 576 |
+
Through enhanced TMN services, the Customer may keep constant track of the problems encountered on the NO/SP's network in respect of their circuits. This reduces the amount of investigations the Customer has to make in the event of problems with their application. The Customer may use a TMN F interface (see ITU-T M.3300 [60]) and workstation to view fault and performance information via an X interface into the NO/SP. ITU-T M.3320 [59] on requirements for the X interface and a new Recommendation on identification of information to be exchanged via the X interface attempt to define how this exchange of information can take place within a TMN environment in a speedy, more efficient manner than traditional methods.
|
| 577 |
+
|
| 578 |
+
Note that, in all cases, this information exchange may include Fault, Configuration, Accounting, Performance and Security information – the so-called "FCAPS" TMN managed functional areas.
|
| 579 |
+
|
| 580 |
+
The Customer wants a speedy restoration of their circuit. They may also wish to know:
|
| 581 |
+
|
| 582 |
+
- where the fault is located;
|
| 583 |
+
- the nature of the fault;
|
| 584 |
+
- above all, when the circuit will be restored, either by fault rectification or changeover.
|
| 585 |
+
|
| 586 |
+
---
|
| 587 |
+
|
| 588 |
+
<sup>2</sup> Some NOs/SPs have introduced computerized documentation (e.g. a trouble ticketing system) and exchange of work orders and set up a Leased Circuits "help-desk", which considerably facilitates operations and fault management.
|
| 589 |
+
|
| 590 |
+
Prior to undertaking corrective maintenance or loop-test activity, the Customer must be asked to give permission for the circuit to be withdrawn from service.
|
| 591 |
+
|
| 592 |
+
### A.3 Fault localization
|
| 593 |
+
|
| 594 |
+
Figure 1/M.1375 [35] gives a typical example of a systematic and coordinated procedure for efficient fault localization. Initial localization should aim to identify as quickly as possible whether the fault is due to the transport network supporting the leased circuit or any terminal equipment provided and maintained by the NO/SP or the Customer. Subsequent localization should aim to identify the specific link section or equipment that has failed. Where TMN techniques are used, automatic identification of the exact cause of problems may greatly simplify fault monitoring and localization. Where fault localization is not achieved in a reasonable time, NO/SPs shall invoke the agreed escalation procedure (see ITU-T M.1560 [47]) to assist progress.
|
| 595 |
+
|
| 596 |
+
It may be useful to reference Figure 1/M.1375 [35] for guidance with fault localization and use TMN data where applicable. The latter may be available at various locations within the NO/SP. The SDH network supporting the SDH leased circuit will normally have alarm surveillance implemented. Alarm surveillance detects and reports relevant events and conditions that may occur within the SDH network. These may occur within the NEs themselves comprising the network or associated with the NEs, e.g., building and power alarms. Alarms are indications that are automatically generated by a NE as a result of certain events and conditions, e.g., loss of signal. A persistence check is applied before declaring a failure. The OS managing the NEs normally has the ability to define which events and conditions generate autonomous reports and which shall be reported on request. The NEs also normally have historical alarm data registers. All events are time stamped and recorded in these registers. Full details of fault monitoring and management of SDH NEs are given in ITU-T G.707 [3], ITU-T G.783 [5] and ITU-T G.784 [6] including multiplex section protection facilities. Further information on transport network event correlation is given in ITU-T M.2140 [54].
|
| 597 |
+
|
| 598 |
+
Initial fault localization should seek to establish whether a fault exists and to determine if it is located within the national circuit portion or elsewhere. The use of network alarm information (available as described above) and measurements of the characteristics of the physical access link up to the Customer connection point, i.e. up to the point where the NO/SP is responsible, may assist. In addition, the higher-order path trace byte J1, which contains a path Access Point Identifier (API) so that a path-receiving terminal can verify its continued connection to the intended transmitter, may assist in the fault location process.
|
| 599 |
+
|
| 600 |
+
Further fault-finding aids are provided by the C2 signal label byte in the higher-order POH, which is coded to indicate the composition or the maintenance status of the VC-n path, and the G1 path status byte, which conveys the path status and performance back to a VC-n trail termination source as detected by a trail termination sink. This feature permits the status and performance of the complete duplex trail (bidirectional path, i.e., circuit) to be monitored at either end, or at any point along that trail. Full details of these functions are given in ITU-T G.707 [3] along with similar capability for lower-order paths carried by an SDH network. A further facility now being fitted to SDH network equipment is TCM. This can assist in determining if errors are entering a NO/SP's domain or being generated within it.
|
| 601 |
+
|
| 602 |
+
Where a fault is found to exist outside of the national circuit portion (i.e., within the international portion or distant national portion) it should be referred to a fault reporting point that has responsibility for international maintenance activities. This will typically be the fault reporting point that has responsibility for the international SDH transmission system. When a fault is referred to another fault reporting point, the information given in A.2 should be exchanged. Further localization should seek to identify the faulty element as quickly as possible. Where fault localization (or confirmation of it) is not achieved in a time consistent with the time to remove the fault or restore the circuit as specified in the SLA/Contract, NOs/SPs shall invoke the agreed escalation procedure (see ITU-T M.1560 [47]) to assist progress.
|
| 603 |
+
|
| 604 |
+
### **A.4 Circuit restoration**
|
| 605 |
+
|
| 606 |
+
SDH leased circuit restoration will normally be achieved initially via protection switching in the SDH transport network. This may be via SDH ring architectures and various levels of path and section switch protection. In cases of catastrophic failure, this may not be achievable and alternate routing of the circuit may have to be performed manually, or the circuit and its supporting network repaired immediately. Temporary restoration will either use dedicated facilities or available spare capacity (see below). This restoration should only be used when it is clear that the normal international network restoration will not be achieved in reasonable time (see Annex D/M.1560 [47]).
|
| 607 |
+
|
| 608 |
+
In any event, it has to be decided which option, repair or changeover, is the speedier and stabler way of restoring the leased circuit. NO/SPs should take into account the urgency for restoration for each particular SDH transmission system as mentioned in the preliminary exchange of information for its provision. Where time to restore the circuit is inconsistent with the SLA/Contract, NO/SPs shall invoke the agreed escalation procedure (see ITU-T M.1560 [47]).
|
| 609 |
+
|
| 610 |
+
### **A.5 Temporary service restoration**
|
| 611 |
+
|
| 612 |
+
Temporary service restoration may be used when a network failure is localized to the international network and this is affecting SDH leased circuits supported by a major international transmission link. Typical international network failures that may require the use of temporary service restoration include the loss of an undersea cable system or satellite system. Temporary service restoration should only be used when it is clear that normal international network restoration will not be achieved in a reasonable time (see Annex D/M.1560 [47]) using SDH protection switching.
|
| 613 |
+
|
| 614 |
+
#### **A.5.1 Mechanisms for implementing temporary service restoration**
|
| 615 |
+
|
| 616 |
+
Two basic mechanisms have been identified as follows:
|
| 617 |
+
|
| 618 |
+
- 1) To use a dedicated temporary restoration facility which will typically be an international SDH transmission system. If both of the following criteria are met, the dedicated temporary restoration facility may be used:
|
| 619 |
+
- a) An international network failure has occurred and it is observed that normal restoration will not be achieved in a reasonable time;
|
| 620 |
+
- b) A dedicated temporary restoration facility is available.
|
| 621 |
+
- 2) To use available temporary restoration capacity, which would typically be found within other international SDH transmission systems that connect to the same destination, although probably following a different physical route within the international network. If each of the following criteria are met, the temporary restoration capacity may be used:
|
| 622 |
+
- a) An international network failure has occurred and it is observed that normal restoration will not be achieved in a reasonable time;
|
| 623 |
+
- b) Any dedicated temporary restoration facility that may have been provided is not available;
|
| 624 |
+
- c) Spare restoration capacity (at the channel or VC-n level) is available;
|
| 625 |
+
- d) The NO/SPs involved have the technical capability and operating procedures to support the temporary switching of channels between international transport systems.
|
| 626 |
+
|
| 627 |
+
#### **A.5.2 Time to restore service**
|
| 628 |
+
|
| 629 |
+
NO/SPs should take into account the urgency for restoration for each particular international SDH transmission system as mentioned in the preliminary exchange of information for its provision (see ITU-T M.1045 [32] and ITU-T M.1400 [38]). Where time to restore service seems to be unacceptable, NO/SPs shall invoke the agreed escalation procedure (see ITU-T M.1560 [47]).
|
| 630 |
+
|
| 631 |
+
#### **A.5.3 Restoration procedure**
|
| 632 |
+
|
| 633 |
+
The following outline procedure is for guidance only. Detailed operating procedures will need to be agreed between the NO/SPs involved taking account of the network infrastructure that is available. This may include the use of a TMN X interface.
|
| 634 |
+
|
| 635 |
+
When an international SDH transmission system failure occurs and the basic restoration criteria have been met (see A.5.1), the NO/SPs involved will confirm that some form of temporary service restoration is to be used and will agree how this is to be achieved. Service can be restored using the following procedure:
|
| 636 |
+
|
| 637 |
+
- a) confirm that the international SDH transmission link is faulty;
|
| 638 |
+
- b) implement restoration switching;
|
| 639 |
+
- c) confirm that the affected leased circuits have been successfully restored.
|
| 640 |
+
|
| 641 |
+
#### **A.5.4 Returning to normal routing**
|
| 642 |
+
|
| 643 |
+
When service can be restored via its normal route, this should be done as a planned outage (see ITU-T M.1540 [46]).
|
| 644 |
+
|
| 645 |
+
#### **A.5.5 Information that should be exchanged**
|
| 646 |
+
|
| 647 |
+
Depending upon the proposed restoration method that is to be used, NO/SPs should ensure that suitable preliminary information has been exchanged (e.g., designations and routings for any international SDH transmission systems that may be used for dedicated service restoration).
|
| 648 |
+
|
| 649 |
+
### **A.6 Automatic rerouting of international SDH transmission links**
|
| 650 |
+
|
| 651 |
+
For priority links such as those bearing SDH leased circuits, NO/SPs may agree to fit the links with automatic rerouting switches, through requisite monitoring systems. These may be 1+1 or n+1 rerouting systems.
|
| 652 |
+
|
| 653 |
+
For leased circuits supported on such links, the number of consecutive severely errored seconds (CSES) due to changeover of the SDH transmission system should be minimized in order to fulfil the requirements of the supported services.
|
| 654 |
+
|
| 655 |
+
### **A.7 Precautions to be taken in the use of DCSs**
|
| 656 |
+
|
| 657 |
+
DCS equipment types vary. Some handle cross-connecting of low speed VC-n signals and have STM-1 digital access ports. Depending on the bit rate of the digital path to be monitored and tested, one or more VCs of the test port are used for the signal. Other types of DCS equipment are used for higher bit rate signals, for example, cross-connecting STM-1/VC-4 digital paths and fitted with STM-4 digital access ports. Many SDH DCSs have considerably more flexibility than PDH DCSs. For further information on SDH cross-connects, see ITU-T G.783 [5].
|
| 658 |
+
|
| 659 |
+
For an international SDH leased circuit, the DCS is typically the routing point, since it fulfils a switching function. The DCS must thus offer a very high degree of availability. If a serious fault should nevertheless occur on a DCS, the NO/SP should have available sufficient alternative arrangements to relieve the faulty unit. At changeover, the databases may have to be loaded and it should be checked whether the software version is compatible if the DCS is a backup for another.
|
| 660 |
+
|
| 661 |
+
# SERIES OF ITU-T RECOMMENDATIONS
|
| 662 |
+
|
| 663 |
+
| | |
|
| 664 |
+
|-----------------|---------------------------------------------------------------------------------------------------------------------------------------|
|
| 665 |
+
| Series A | Organization of the work of ITU-T |
|
| 666 |
+
| Series B | Means of expression: definitions, symbols, classification |
|
| 667 |
+
| Series C | General telecommunication statistics |
|
| 668 |
+
| Series D | General tariff principles |
|
| 669 |
+
| Series E | Overall network operation, telephone service, service operation and human factors |
|
| 670 |
+
| Series F | Non-telephone telecommunication services |
|
| 671 |
+
| Series G | Transmission systems and media, digital systems and networks |
|
| 672 |
+
| Series H | Audiovisual and multimedia systems |
|
| 673 |
+
| Series I | Integrated services digital network |
|
| 674 |
+
| Series J | Transmission of television, sound programme and other multimedia signals |
|
| 675 |
+
| Series K | Protection against interference |
|
| 676 |
+
| Series L | Construction, installation and protection of cables and other elements of outside plant |
|
| 677 |
+
| <b>Series M</b> | <b>TMN and network maintenance: international transmission systems, telephone circuits, telegraphy, facsimile and leased circuits</b> |
|
| 678 |
+
| Series N | Maintenance: international sound programme and television transmission circuits |
|
| 679 |
+
| Series O | Specifications of measuring equipment |
|
| 680 |
+
| Series P | Telephone transmission quality, telephone installations, local line networks |
|
| 681 |
+
| Series Q | Switching and signalling |
|
| 682 |
+
| Series R | Telegraph transmission |
|
| 683 |
+
| Series S | Telegraph services terminal equipment |
|
| 684 |
+
| Series T | Terminals for telematic services |
|
| 685 |
+
| Series U | Telegraph switching |
|
| 686 |
+
| Series V | Data communication over the telephone network |
|
| 687 |
+
| Series X | Data networks and open system communications |
|
| 688 |
+
| Series Y | Global information infrastructure and Internet protocol aspects |
|
| 689 |
+
| Series Z | Languages and general software aspects for telecommunication systems |
|
marked/M/T-REC-M.1320-198811-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1320-198811-I_PDF-E/aec7150315249ac202a63cc0e32323b8_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1320-198811-I_PDF-E/raw.md
ADDED
|
@@ -0,0 +1,91 @@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 |
+
|
| 2 |
+
|
| 3 |
+

|
| 4 |
+
|
| 5 |
+
The logo of the International Telecommunication Union (ITU) features the letters 'ITU' in a bold, sans-serif font, superimposed on a stylized globe with intersecting lines.
|
| 6 |
+
|
| 7 |
+
ITU logo
|
| 8 |
+
|
| 9 |
+
INTERNATIONAL TELECOMMUNICATION UNION
|
| 10 |
+
|
| 11 |
+
**ITU-T**
|
| 12 |
+
|
| 13 |
+
**M.1320**
|
| 14 |
+
|
| 15 |
+
TELECOMMUNICATION
|
| 16 |
+
STANDARDIZATION SECTOR
|
| 17 |
+
OF ITU
|
| 18 |
+
|
| 19 |
+
**MAINTENANCE: INTERNATIONAL DATA
|
| 20 |
+
TRANSMISSION SYSTEMS**
|
| 21 |
+
|
| 22 |
+
---
|
| 23 |
+
|
| 24 |
+
**NUMBERING OF CHANNELS IN DATA
|
| 25 |
+
TRANSMISSION SYSTEMS**
|
| 26 |
+
|
| 27 |
+
**ITU-T Recommendation M.1320**
|
| 28 |
+
|
| 29 |
+
(Extract from the *Blue Book*)
|
| 30 |
+
|
| 31 |
+
---
|
| 32 |
+
|
| 33 |
+
# NOTES
|
| 34 |
+
|
| 35 |
+
1 ITU-T Recommendation M.1320 was published in Fascicle IV.2 of the *Blue Book*. This file is an extract from the *Blue Book*. While the presentation and layout of the text might be slightly different from the *Blue Book* version, the contents of the file are identical to the *Blue Book* version and copyright conditions remain unchanged (see below).
|
| 36 |
+
|
| 37 |
+
2 In this Recommendation, the expression “Administration” is used for conciseness to indicate both a telecommunication administration and a recognized operating agency.
|
| 38 |
+
|
| 39 |
+
# NUMBERING OF CHANNELS IN DATA TRANSMISSION SYSTEMS
|
| 40 |
+
|
| 41 |
+
Using suitable modems and multiplexers it is possible to provide for a combination of data channels multiplexed together to form an aggregate bit rate for transmission purposes.
|
| 42 |
+
|
| 43 |
+
The principle shown in Annex A and Figure 1/M.1320 may be applied to higher bit rates as modems, etc., are developed and deployed.
|
| 44 |
+
|
| 45 |
+
The numbering of data channels is obtained by indicating the multiplex channel followed by the sub-channel data rate assigned number in accordance with the scheme contained in Table A-1/M.1320.
|
| 46 |
+
|
| 47 |
+
As an example, Figure 1/M.1320 shows a data transmission system, London-Montreal 96H001, employing equipment providing for 2 channels at 2400 bit/s and one channel at 4800 bit/s forming an aggregate bit rate of 9600 bit/s.
|
| 48 |
+
|
| 49 |
+
For this system the channel numbering would be:
|
| 50 |
+
|
| 51 |
+
London-Montreal 96H001/A2
|
| 52 |
+
|
| 53 |
+
London-Montreal 96H001/B1
|
| 54 |
+
|
| 55 |
+
London-Montreal 96H001/C1
|
| 56 |
+
|
| 57 |
+

|
| 58 |
+
|
| 59 |
+
The diagram illustrates a data transmission system between two points, London and Montreal. On the left, three data channels are shown entering a multiplexer: A2 at 4800 bit/s, B1 at 2400 bit/s, and C1 at 2400 bit/s. The multiplexer is labeled 'Multiplexer' and 'Modem' with a 'V.29' standard indicator. The output of this multiplexer connects to a second multiplexer on the right via a central transmission line. The second multiplexer is also labeled 'Modem' and 'Multiplexer' with a 'V.29' standard indicator. Its outputs are labeled A2 at 4800 bit/s, B1 at 2400 bit/s, and C1 at 2400 bit/s. Above the diagram, a horizontal double-headed arrow labeled 'London-Montreal 96H001' spans the entire width, while another horizontal double-headed arrow labeled 'London-Montreal D1' spans only the central transmission line. The text 'CCITT - 48832' is located at the bottom right of the diagram.
|
| 60 |
+
|
| 61 |
+
Diagram of channel numbering scheme for data transmission systems. It shows two multiplexers connected by a central line. The left multiplexer has inputs labeled with bit rates and channel numbers: (4800 bit/s) A2, (2400 bit/s) B1, and (2400 bit/s) C1. The right multiplexer has outputs labeled similarly. Above the multiplexers, a bracket labeled 'London-Montreal 96H001' spans the entire system, and another bracket labeled 'London-Montreal D1' spans the central transmission line. The text 'CCITT - 48832' is at the bottom right.
|
| 62 |
+
|
| 63 |
+
FIGURE 1/M.1320
|
| 64 |
+
**Example of the channel numbering scheme for data transmission systems**
|
| 65 |
+
|
| 66 |
+
## ANNEX A
|
| 67 |
+
|
| 68 |
+
(to Recommendation M.1320)
|
| 69 |
+
|
| 70 |
+
Table A-1/M.1320 shows the channel numbering scheme for data transmission systems operated at an aggregate data rate of 9600 bit/s. The table also shows the channel numbering scheme for systems using 9600 bit/s modems operated at reduced data rates of 7200 bit/s or 4800 bit/s.
|
| 71 |
+
|
| 72 |
+
TABLE A-1/M.1320
|
| 73 |
+
|
| 74 |
+
**Channel numbering scheme for data transmission systems using 9600 bit/s data modems conforming to Recommendation V.29 [1]**
|
| 75 |
+
|
| 76 |
+
| Sub-channel data rate | Assigned number | Aggregate data rate | Multiplex configuration | Sub-channel data rate | Multiplex channel | Channel number |
|
| 77 |
+
|-----------------------|-----------------|---------------------|-------------------------|------------------------------|-------------------|----------------------|
|
| 78 |
+
| 9600 | 4 | 9600 bit/s | 1 | 9600 | A | A4 |
|
| 79 |
+
| 7200 | 3 | | 2 | 7200<br>2400 | A<br>B | A3<br>B1 |
|
| 80 |
+
| 4800 | 2 | | 3 | 4800<br>4800 | A<br>B | A2<br>B2 |
|
| 81 |
+
| 2400 | 1 | | 4 | 4800<br>2400<br>2400 | A<br>B<br>C | A2<br>B1<br>C1 |
|
| 82 |
+
| | | | 5 | 2400<br>2400<br>2400<br>2400 | A<br>B<br>C<br>D | A1<br>B1<br>C1<br>D1 |
|
| 83 |
+
| | | 7200 bit/s | 6 | 7200 | A | A3 |
|
| 84 |
+
| | | | 7 | 4800<br>2400 | A<br>B | A2<br>B1 |
|
| 85 |
+
| | | | 8 | 2400<br>2400<br>2400 | A<br>B<br>C | A1<br>B1<br>C1 |
|
| 86 |
+
| | | 4800 bit/s | 9 | 4800 | A | A2 |
|
| 87 |
+
| | | | 10 | 2400<br>2400 | A<br>B | A1<br>B1 |
|
| 88 |
+
|
| 89 |
+
## **Reference**
|
| 90 |
+
|
| 91 |
+
- [1] CCITT Recommendation 9600 bits per second modem standardized for use on point-to-point 4-wire leased telephone-type circuits, Vol. VIII, Rec. V.29.
|
marked/M/T-REC-M.1340-200002-I_PDF-E/26d664119ad25250780f554633444e54_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1340-200002-I_PDF-E/2dfa6ac3edfe874f68aa0cbccaa42322_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1340-200002-I_PDF-E/366a77fdefb0097b3289b4a011911390_img.jpg
ADDED
|
Git LFS Details
|
marked/M/T-REC-M.1340-200002-I_PDF-E/58f4167687de8d7339594e5f6fbe0bc6_img.jpg
ADDED
|
Git LFS Details
|