post_id
stringlengths
1
6
body
stringlengths
1
53.8k
60163
<p>Nose brakes can help the aircraft in braking and it can also help in reducing the travel on the runway length. So why don't we use brakes in the nose landing gear? </p>
60297
<p>Thai Lion Air primarily flies short-haul domestic routes and most of the time I find myself on an ER version of a relatively new 737. Isn't ER for extended range? And thus costs a lot more per plane?</p> <p>Incidentally their sister company Malindo also has what seems to be an unnecessary amount of ERs (I just flew...
70697
<p>Can someone help with the abbreviations and meaning from Lido flight planning:</p> <ul> <li>RCONT 5 MIN</li> <li>HLDDST</li> <li>ADDT</li> </ul> <p>For each of these abbreviations, the flight plan has fuel and time:</p> <p><a href="https://i.sstatic.net/c0hQb.png" rel="nofollow noreferrer"><img src="https://i.sst...
55980
<p>I want to see if anyone knows what the heck is going on here. I was doing a flight out in Palo Alto California recently, and during the run up this Cessna 182 pulled in next to us. It appears to have a canard foreplanes attached near the firewall of the airplane, and it appears to have a movable control surface on...
80437
<p>What pitch attitudes are common during an emergency descent? I assume it would be a fairly nose-down attitude, but I can't imagine how steep would feel to the passengers.</p> <p>Suppose a gradual decompression takes place and no structural damage is present nor suspected. What would be the pitch attitude for common ...
51396
<p>Maybe unusual question but it's related to Aviation world, even if is more directly related to <strong>Drones</strong> one.</p> <p>Why almost all consumer drones like DJI's and Yuneec's ones (but it's true also for other manufacturers) uses <strong><em>two</strong> blade propellers</em> only?</p> <p>I'd think that...
79609
<p>While the Air Force (or other military unit) does not design their own jets, they do release specifications and have contests (e.g. the <a href="https://en.wikipedia.org/wiki/Advanced_Tactical_Fighter" rel="noreferrer">ATF</a> that selected the F-22). This is basically the way it works (and not just for fighter proc...
21881
<p>At what point during flight would Concorde go supersonic? Would it climb to cruising altitude first? Does altitude affect the transsonic difficulties (buffet, need for extra thrust, etc.)?</p>
81692
<p>What do we mean by rotor damping (in terms of helicopters)?</p> <p>How is it affected by air density?</p> <p>How does helicopter stability depend on rotor damping?</p>
65716
<p>If a helicopter's tail rotor shears off while flying then the helicopter's fuselage will start rotating in the direction opposite to the main rotor's rotation direction. During autorotation, if I switch off the engines of the helicopter, then will it affect the rate of rotation of helicopter?</p>
66637
<p>The industry is spending billions on maximising fuel efficiency and reducing other costs associated with the tube-with-wings model. When will novel designs like semi-dirigible and lifting body arrive, what's the delay, surely the industry will be forced into a corner before the latest batch of airliners are due for ...
66759
<p>I am doing Instrument Rating under part 61 with a CFII.</p> <ol> <li>To meet the 50 hours cross country requirement (d 1), can I log some of the PIC time in a simulator?</li> <li>There is a 20 hours limitation on the use of simulator (h 2). So, if I have 40 hours of simulator time and 15 of them are cross country, ...
61434
<p><strong><em>Nope</em></strong></p> <p>Updates like this are <a href="https://www.faa.gov/regulations_policies/airworthiness_directives/" rel="nofollow noreferrer">generally deployed under an Airworthiness Directive</a> ("AD") and in this case will likely be required although not all AD's technically are. AD's are i...
63926
<p><a href="https://i.sstatic.net/EBzBA.jpg" rel="nofollow noreferrer"><img src="https://i.sstatic.net/EBzBA.jpg" alt="enter image description here"></a> (<a href="http://www.concordesst.com/02/02exterior1.html" rel="nofollow noreferrer">source</a>)</p> <blockquote> <p>This is the side loading door. Under this door ...
61234
<blockquote> <p>RNAV(GPS) procedures being combined with LPV or LNAV/VNAV, which are Landing Systems</p> </blockquote> <p>Your confusion here is that LPV is a landing system which it is not. It is a way of saying <em>your GPS is going to work kind of like an ILS and will have similar horizontal/vertical responses ...
56974
<p>I want to build a generic performance app.</p> <p>For many of the aircraft the only available method is using the takeoff charts manually (I'm not referring to the more simple-to-calc short field charts but to the charts which consider also the wind components).</p> <p>Is there a way to convert these charts into n...
58781
<p>In many of the POHs, in the W&B section it is indicated that there is a moment change due to gear retraction. For example : Moment change due to gear retraction +780 in-lbs.</p> <p>Two questions :</p> <ol> <li><p>If I understand correctly, to simulate a gear retracted scenario I only need to add 780 to the <strong...
57275
<p>What does 00-50 mean on the sectional chart under PHNL (see picture)?</p> <p><a href="https://i.sstatic.net/M7TKP.jpg" rel="noreferrer"><img src="https://i.sstatic.net/M7TKP.jpg" alt="PHNL Sectional"></a></p>
57335
<p>If I want to solo circumnavigate the world by plane as the youngest pilot, what are the FAI requirements regarding the routing? </p> <p>Most standard routings include the Hawaii to California leg, which is about 2200NM, a bit far for my plane. </p> <p>However, I found <a href="http://raviworldflight.com/#routing" ...
87678
<p>I'm CFI and one of my student haven't flown after he got his private pilot license in 1990's and he wanted to fly again. The thing is his medical is expired already and he doesn't fit medical standards anymore so we're aiming for sport pilot privilege(He isn't qualify for BasicMed also he got his medical before 2006...
87495
<p>The star symbol on the top of the airport means airport beacon light but Sacramento Executive (KSAC) has no star symbol but they do have a beacon light and controlled airport as well.</p> <p>Is that misprinted or any reason for that?</p> <p><a href="https://i.sstatic.net/pw0wb.jpg" rel="noreferrer"><img src="https:/...
71237
<p>I have been watching some episodes of the documentaries made by National Geographic lately and I have noticed something that I can't find an explanation for.</p> <p>In this episode of <a href="https://www.youtube.com/watch?v=rqOX2Zj3LJo&feature=youtu.be&t=1041" rel="nofollow noreferrer">Megafactories - Eurofighter ...
71551
<p>So me and my group mates in university got a lockwood hiller valveless pulsejet manufactured, and there was one error in manufacture. We are having trouble with trying to start the engine as demonstrated in the attached link. Is there an error in the engine you can see? One manufacturing error we identified is that...
68327
<p>On aerofoil section, the force of lift acts perpendicular to, and the force drags acts parallel to the :</p> <p>A: chord line B: flight path C: aerofoil section upper surface D: longitudinal axis</p>
77831
<p>This may or may not have anything to do with the covid-19 pandemic. This may be a scheduled aerial survey that goes unnoticed when people have more important activities taking their attention. </p> <p>As a matter of fact, the last couple of newbies posted flights from the same company as you have posted today, <a h...
78376
<p>As I've recently started time building in DA20, I've noticed the AFM suggests flaps at T/O for a glide. Being very intrigued by this I run across <a href="https://aviation.stackexchange.com/questions/65324/best-glide-with-flaps-t-o-in-da20-a1">this</a> post. Although I appreciate Peter's reply that does throw some l...
65680
<p>What is the difference between:</p> <ul> <li>VFR Flyways</li> <li>VFR Corridors</li> <li>VFR Transition Routes</li> </ul> <p>I can find a Flyway chart on the reverse side of the TAC chart and also Transition Routes in the TAC chart. But where can I find a VFR Corridor chart? I Googled it, but there’s nothing.</p>
57784
<p>I recently had a discussion with an aviation expert, who works as a Flight Instructor, about constant speed propellers - variable pitch propellers - on light piston aircraft.</p> <p>I have always known that these kind of propellers are capable of changing their pitch angle in flight in order to keep propeller blade...
57968
<p>Does the FAA allow a jet bridge to approach an aircraft that has engine #2 running?</p>
58188
<p>There is an excellent question/answer on leaning <a href="https://aviation.stackexchange.com/questions/36166/why-is-mixture-lean-recommended-on-the-ground">here</a>. However what I have not yet understood is why one would NOT lean for takeoff below 3000 feet? Why does the Lycoming Service Directive 1497A/B still say...
59135
<p>In a METAR such as this one:</p> <blockquote> <p>KGOK 161553Z AUTO 18011KT 4SM BR OVC007 07/05 A3011 RMK AO2 SLP201 T00670050</p> </blockquote> <p>Translated to:</p> <blockquote> <p>Jan 16, 1553Z, Automated. Mist, Wind from 180° at 11 knots, 4 statute miles visibility, Ceiling is Overcast at 700 feet, Tem...
82211
<p>Trying to understand the coefficient of lift/drag of swept and unswept wings as speed increases. Some example questions and statements- A swept wing will have a lower max Cl at subsonic and supersonic speeds. I understand the lower max cl at subsonic, but the lower max cl at supersonic has confused me?</p> <p>When...
78247
<p>Yesterday I was flying in my simulator with the Cessna 172 when I thought about simulating a fault in the plane's electrical system (alternator and master). But then I was in doubt, if I can't contact the tower or enter a code on the transponder, how can I inform that I need to land on a runway?</p>
78089
<p>We know that the jet blast of jetliners - A320, B737 and bigger - are dangerous for people passing by, airport vehicles and even small planes, and we must always maintain a huge distance to avoid receiving this jet.</p> <p>So, is there any risk or damage to other similar sized aircraft queuing for takeoff or whatev...
78058
<p>I want to fly the LAX Coastal VFR Transition Route northbound, and I want to do the whole thing with flight following. When I get near Van Nuys airport, I'll need to tell ATC (flight following) that I want to change my direction and head eastward to a different airport. How do I do this? And more broadly, how do ...
78126
<p>I just noticed yesterday that the right and left forward doors of all E-Jet Family aircraft have different sizes (both in height and in width). What is the reason behind this design difference?</p> <p><img src="https://i.sstatic.net/6QLpc.jpg" alt=""> <img src="https://i.sstatic.net/KzoCy.jpg" alt=""></p>
78328
<p>Some airplanes have a dutch roll filter for the "yaw damper."</p> <p>What is the dutch roll filter? When is it used? Is it ever required for certification or operation? How does it work?</p>
71766
<p>If I want to calculate static air temperature (OAT), but I'm only given an altitude and a true airspeed. Is there such an equation that relates these principles together. I've had a look at wikipedia and to calculate OAT, the total air temperature is required. Problem is, I don't have a Mach number to solve the equa...
14965
<p>Actual <a href="http://en.wikipedia.org/wiki/Rejected_takeoff" rel="nofollow">RTO</a> (rejected take off) is a certification test that airplane manufacturer must perform succesfully.</p> <p>In this test the airplane must reach decision speed and abort take-off. When aborting take-off, the pilot should stop the airp...
25005
<p>In order to reduce the certification time needed, manufacturers usually manufacture more than one testing aircraft, this way several flight tests can be done in parallel.</p> <p>Once the airplane is finished, keeping those airplanes is a cost and there is no business case to keep all them. However, an airplane mode...
24540
<p>There are several sources of noise and a complete theory explaining how the noise is created. There are several mechanisms working in a car.</p> <p>One mechanism appears when you have, as you mention, detached flow. When a flow is detached the flow structures after the detachment point is similar to the following o...
32210
<p>The answer is yes.</p> <p>Essentially the formula to obtain lift is the following:</p> <p>$$ L=1/2\rho V^2C_L $$</p> <p>Where $$C_L$$ is the lift coefficient, which (in a simplified description) only depends on the configuration of the airplane (i.e. deploying flaps). </p> <p>The density depends on the flying he...
58597
<p>I'd like to use an N number that is listed as available. But when I request it, it shows as being deregistered. How can I get this number for my aircraft?</p>
59203
<p>Commuter Category is defined rigorously, </p> <p><a href="https://www.law.cornell.edu/cfr/text/14/23.3" rel="nofollow noreferrer">https://www.law.cornell.edu/cfr/text/14/23.3</a></p> <p>But I was unable to find an equivalent definition for Transport Category in the regulations (not Wikipedia or the FAA website, ha...
59305
<p>Let's say I rebuild an aircraft in the USA and it does not have a current airworthiness certificate. The DAR requests a check flight during the process of issuing the new airworthiness certificate.</p> <p>My question is: do I need a check flight authorization or permit from the FSDO to be able to fly without an air...
61936
<p>Consider a CDI as shown below. If the CDI is set to FROM and the selected course is north, but the needle indicates three dots to the right (each dot signifying a 2 degree deviation from the selected course, i.e. 6 degrees in total), then why is the aircraft's radial at 354 degrees?</p> <p>I associate a right movem...
62054
<p>On a Jeppesen Student Flight Computer (CSG), how does one calculate the gradient in percentage if the ground distance and height above ground level are given?</p> <p>I can't find anything in the <a href="https://e-atpl.com/pdf/Jeppesen_E6B_flight_computer_manual.pdf" rel="nofollow noreferrer">accompanying manual</a...
67905
<p>From what I understand, induced drag comes from a reduction of the effective angle seen by the airfoil.</p> <p>However, from wind tunnel smoke visualization, we can see that the streamlines at the leading edges and stagnation point tend to "go upward'. Which is the opposite of what the effective relative wind is s...
72676
<p>Is it possible to take a CFM56-3C engine and modify it to a CFM56-3B1 engine? I own a CFM56-3C engine but my customer would like to install a CFM56-3B1 engine on his plane. Can this be done? </p>
70047
<p>I am looking to get hold of Cirrus Aircraft VisionJet Oleo Struts Material and Dimension Specifications. Can anyone point me to or share where I can obtain these details. So far, I have been able to get general specifications at the following link.<br> <a href="https://cirrusaircraft.com/aircraft/vision-jet" rel="no...
71238
<p>The book measures 20 x 20.3 x 1.4cm and I'm assuming it's sealed shut so the pages don't flap open. Mass is 450g.</p> <p>I want to understand how quickly it would fall if dropped straight down from 10km altitude. I've used a value for drag coefficient for a flat plate perpendicular to the air flow that I got from N...
79665
<p>I don't spot an answer to <a href="https://www.youtube.com/watch?v=mDsozca8gfA&lc=UgzHObDNqVZdj4jr5Dp4AaABAg.8vy5m8pHG2_8yk6vQ9MSuW" rel="noreferrer">this question</a>, so thought to re-post it here. Larger airplanes are heavier and would ostensibly be pushed less by the wind compared to a small airplane? Do larger ...
69877
<p>In fighter jets, how do pilots align the HUD with their eyeballs? </p>
79940
<p>Interesting to see how resultant force point backward from 0-10 AoA and point forward from 10-40 AoA in respect to vertical of chord line.</p> <p><a href="https://i.sstatic.net/w7IDZ.png" rel="nofollow noreferrer"><img src="https://i.sstatic.net/w7IDZ.png" alt="enter image description here" /></a></p> <p><strong>I f...
79602
<p>In the classification of systems and components on the aircraft - is an APU classified under the Airframe or the Powerplant?</p>
72845
<p>We are in the research process of a panel upgrade in a M5 Maule. The ac is used for transportation and aerial survey to support ground survey. We frequently fly tight, low alt grids. Lateral and vertical deviation limits are 50’. Is it possible to display WAAS enabled GPS Flightlines on older mechanical flight dir...
74453
<p>I am well aware that the average human is unable to open plug doors in flight due to pressurization of the cabin. I've noticed, however, a "cabin pressure" warning light in the window of exit doors, and specific instructions to not try to open the door when the light is on. Is there an actual danger of someone outsi...
79782
<p>In the FCOM OF BOEING 737 HYDRAULIC SECTION I went through the part Landing gear transfer unit that it is used to raise the landing gear at a normal rate when system A EDP volume is lost.</p> <p>My query is if only the hydraulic system A is lost with landing gear up position can it lowered using system B hydraulic o...
58072
<p>What are the materials used in a tow bar of the pictured design? I am interested in the materials use for the tube (which aluminium alloy?) and the materials of the lunette mount flat and inside structure. <a href="https://i.sstatic.net/Ib29f.jpg" rel="noreferrer"><img src="https://i.sstatic.net/Ib29f.jpg" alt="ente...
80466
<p>I want to know whether it is possible to make a helicopter with blades that rotate counter-clockwise (CCW) seen from below. I have difficulty understanding the angular momentum in this situation.</p> <p>As we may see in the picture below, the rotor rotates clockwise (CW) seen from the pilot seat look up. So far, the...
68496
<p>If I remember correctly oil in oxygen lines should be avoided due to the possibility of hazardous combustion. However I've seen recently that engineers use oil to lubricate pneumatic air tools. Can someone explain why this is allowed?? </p>
76691
<p>How accurate is XFoil/XFLR5 at Reynolds numbers between 2 million and 10 million?</p> <p>From my understanding it's only accurate at lower Re values.</p>
76690
<p>Highly cambered airfoils like the Seligs and Epplers are hardly ever used in propeller or wing sections. Why?</p> <p>Does their performance reduce at high Re? Are they only adequate at low Mach, low Re?</p> <p>The question only regards the aerodynamics. Ignore fuel storage and structural elements.</p>
64013
<p>I don't know why the <a href="https://en.wikipedia.org/wiki/European_MALE_RPAS" rel="nofollow noreferrer">European MALE RPS UAV</a> designers chose to use twin engines?</p> <p>I know two engines are expensive but add safety...</p> <p>Does choice is to obtain mass flow @ Medium altitude(low air density)?<br> especi...
80424
<p>In <a href="https://www.youtube.com/watch?v=p1PgNbgWSyY" rel="noreferrer">this video</a>, Destin — the creator of YouTube channel Smarter Every Day — rides in an F-16 with a USAF Thunderbirds pilot. If you start watching the video at the 11:06 mark, you will see what happens when the aircraft passes through Mach 1, ...
76894
<p>It is often said that the lift vector helps to propel a glider forwards. The lift vector has no component acting parallel to the glider's trajectory through the airmass, but in many cases the lift vector does have a component acting parallel to the glider's trajectory as seen from the ground. Note that for a given...
32068
<p>Prandtl's lifting line assumes that the form of the solution for its equation is similar to an elliptical solution with small variations.</p> <p>$$ \Gamma(\Theta)=4sV_{\infty} \sum_{n=1}^{\infty}A_nsin(n\Theta) $$</p> <p>Which, essentially, assumes that the circulation at the tips is 0, so the tip is not producing...
30947
<p>The answer is NO, but it is important to understand why. I will explain the conditions, and answer your questions at the end one by one.</p> <p>First point you are never testing the same engine:</p> <ul> <li>Aircraft manufacturer usually introduces its inlet and its nozzle so both are not usually the same in a tes...
38402
<p>Actually the answer is quite complex, but essentially depends on the local aerodynamics, shape of the probe and the anti-icing power (heating).</p> <p>Imagine an airplane flying around a cloud, it essentially approaches air with small drops of water floating around, those drops of water impact the pitot tube and so...
80035
<p>I'm designing an RC aircraft of which the final goal is a crazy top speed. I'll be 3D printing and sanding / finishing the air frame surfaces to reduce drag. In order to achieve maximum top speed, should I use open 5 inch diameter 3 blade props (the ones used in racing drones) with a large pitch and beefy motor, or ...
81159
<p>I know that in Mode <span class="math-container">$3$</span> (which includes Mode A and Mode C) the aircraft transmits <span class="math-container">$12$</span> information pulses. That corresponds to <span class="math-container">$2^{12}=4096$</span> squawk combinations in Mode A which are sent to ATC to identify the ...
79252
<p>I'm trying to figure out typical AR values for a T-tail configuration (at the conseptual design phase). Working with Raymer I found this table:</p> <p><a href="https://i.sstatic.net/RARd9.png" rel="nofollow noreferrer"><img src="https://i.sstatic.net/RARd9.png" alt="enter image description here" /></a></p> <p>I can ...
73628
<p>why in Lift and Drag calculation over an airfoil we ignore shear stress effect and focus on pressure distribution?</p>
77340
<p>I'm currently doing simulations for eVTOL type of vehicles and for the purpose of controlling the attitude, I'd like to know the common limits for roll and roll rates (more important) that are in place for civil flights. I'm interested both for airplanes and helicopters even though I do prefer information for rotary...
77233
<p>As Mr. John D. Anderson states, the aerodynamic forces on a body are due to only two sources: pressure distribution over the body and shear stress distribution.</p> <p>Shear stress is acting tangential to the surface, so to some amount, friction is also contributing to the lift of a body, not only to drag. But what...
77852
<p>A wing flies to the left in the air (no wind). Particles A and B moves to the right in relation to wing.</p> <ol> <li><p>In which direction do particles A and B moves in relation to the ground? What is velocity of particles in relation to the ground?</p></li> <li><p>Don't forget, air is at rest (no wind) and the wi...
77966
<p>Cessna 172 has weight about 1 ton and it's engine produces about 213 Kg of thrust, and it flies great.</p> <p>So if I make a plane with a weight of 100kg including pilot and fuel so will 15 kg thrust good for the plane, and if not please recommend me engine which is perfect and please also recommend me the best pro...
78618
<p>What is the name of the instrument that would indicate whether the wings are level or tilted (one higher than the other) as when flying IFR? Is it the inclinometer?</p>
73603
<p>I can understand coaxial rotors cancelling the need for a tail rotor, however, I am curious as to if the second rotor is needed to actually maintain the same pitch or could be just used to offload the primary disk in a powered auto-rotate capacity? That would just create more drag I assume.</p>
78645
<p>I've read this <a href="https://twitter.com/Maxar/status/1268258165214392322" rel="nofollow noreferrer">twit</a></p> <p>Chinese carrier got photographed by a satellite.<br> <a href="https://i.sstatic.net/IyvBw.jpg" rel="nofollow noreferrer"><img src="https://i.sstatic.net/IyvBw.jpg" alt="enter image description her...
78920
<p>May i know if i have 3 pressure transducer, 1 facing upwards and the other downwards to measure the vertical velocity of a VTOL (Vertical Takeoff and Landing aircraft) and another 1 on the nose of the aircraft, do i still need a pressure transducer to mimic a Static port to measure the climb rate? Since i already ha...
66207
<p>What is the typical sink rate during a well-executed carrier landing at the moment the main wheels touch the deck? And how has this changed over the decades?</p>
82052
<p>It is often said in aviation circles that "pitch plus power equals performance".</p> <p>A. What is it supposed to mean?<br /> B. Is it always true?<br /> C. If it isn't always true, why is it a useful concept nonetheless?</p>
57375
<p>Is the raw data fetched from the FDR available only in binary format and if so what are the software tools that are used to convert it to readable format?</p>
57378
<p>What are the advantages of ECTM and why is it not used in military aviation even though it will help in many ways?</p>
56783
<p>What are some of the methods used to reduce the drag caused by the landing gear for aircraft with non-retractable landing gear?</p>
68085
<p>When I side slip my glider "correctly" the <strong>airspeed indicator drops to zero</strong> or at least shows large fluctuations between 30 to 90% of the actual airspeed. So the <strong>airspeed indicator essentially becomes worthless during a large side slip</strong> and can't give any estimate whether the aircraf...
79877
<p>When performing a HILPT, typically the aircraft will pass the hold point outbound and perform the correct entry. When you are inbound, you will continue with the approach once crossing the hold point again.</p> <p>The aircraft will only pass the hold point twice unless a request is made to ATC for further hold to g...
90336
<p>It is true, a track will send you directly over GIDOO but the missed approach text says to fly a heading. It would take a strong wind to have any real effect on the offset from GIDOO when you cross it.</p> <p>Most likely there are other aircraft on radar vectors and are being affected by the wind just like you woul...
26528
<p>The STC documentation provided with the GPS / FMS installation will indicate the type of minima it can go down to. </p> <p>Typically, GA aircraft like a Garmin 430/530 will only be certified down to LNAV minima.</p> <p>Business type aircraft with FMS's may be certified to LNAV/VNAV minima. These installations us...
26684
<p>61.31 requires these endorsements for the legal pilot in command only. If the safety pilot is not the legal pilot in command the endorsements are not required. </p> <p>The only requirement is for the safety pilot to be appropriately rated and have a current medical. See 91.109</p>
87269
<p>You stated ATC indicated they will give you vectors to the IF and not vectors to final (VTF). Why would you select VTF when that is not what ATC is doing? It's a rhetorical question but hopefully designed to allow you to realize that VTF is, in my opinion, the non-standard method.</p> <p>I have flown lots of diffe...
102633
<p>I don't know if there is a question posed by the OP. The level of precision flying required of a type rating applicant is the same as what is required if applying for an ATP certificate.</p> <p>The FAA, rightfully so, considers anyone who flies a type rated airplane to need to have the necessary piloting skill, CRM...
77509
<p>Does anybody knows how much did secondary nozzles <strong>bucket type</strong> on the Concorde's engines contributed to the increase of thrust during take of and sub-sonic flight? This is picture of the nozzles <img src="https://i.sstatic.net/dtdnO.jpg" alt="nozzle modes"> and here is air flow during take of <img sr...
77719
<p>In the Boeing 737 NG series, can the usual 3 degrees Path angle used for VNAV Descent be modified through the FMC to another angle?</p>
80087
<p>It has been said the most fuel efficient way to fly is by flying in thinner air. On the other hand the largest plane in the world was the Russian "Caspian Sea Monster" Ekranoplan, which is said to be the most efficient plane for its weight. <a href="https://i.sstatic.net/oWts2.jpg" rel="nofollow noreferrer"><img src...
78432
<p>I stumbled over this sentence in a training material about fuel leak: </p> <p>"If the fuel quantity symmetrically decrease in both wing tanks and the fuel quantity in the center tank decrease, the fuel leak comes from the center tank <strong>or the APU feed line</strong>."</p> <p>Regarding the APU feedline part, w...
73640
<p>I know that airport diagrams show the exact position of airport runways in DMS (degrees, minutes, seconds) and therefore could use trigonometry to find how far apart runway centerlines are from adjacent parallels, but is there a more accurate way to find runway centerline spacing on these diagrams?</p>
54520
<p>I have a Cessna 172P in which the handheld microphone has stopped working. Before I replace, I was wondering if there is any good reason to even have one? I have PTTs on both the pilot and copilot, yoke.</p>
77946
<p>The Mirage III / 5 series of fighter aircraft are versatile aircraft, but has a high approach speed of 180 knots and a high landing speed, requiring long runways.</p> <p>Underwing flaps, like those of the Gloster Javelin, would surely work, and the fact that they are close to the CG would not cause an acceptable pi...