post_id stringlengths 1 6 | body stringlengths 1 53.8k |
|---|---|
2994 | <ul>
<li><p>What should a pilot do to perform a successful <strong>emergency water landing</strong>, also known as <a href="http://en.wikipedia.org/wiki/Water_landing" rel="noreferrer" title="Ditching">ditching</a> of a big commercial jet?</p></li>
<li><p>Is there any checklist, or best practices, like <em>"elevate the... |
22247 | <p>I learned that on modern airliners, the Rudder input is given by the pedals located under the pilot's feet, and that got me thinking:</p>
<ul>
<li>how do the pilots give the command to brake the plane in order to slow it down on ground (landing/taxing)?</li>
<li>Is the parking brake and "regular" wheel brake part o... |
12045 | <p>I was reading an <a href="http://avherald.com/h?article=3f7431e7/013&opt=0" rel="nofollow">article about TAM Airlines Flight 3054 crash</a> and I saw the following:</p>
<p><strong>METAR</strong></p>
<blockquote>
<ul>
<li>SBSP 172200z 35008kt 7000 -ra Bkn008 Ovc070 15/14 Q1018</li>
<li>SBSP 172200z 35008kt 70... |
7625 | <blockquote>
<p><strong>To certify any Commercial Jet Plane worthy of flying,</strong> </p>
<p>a 2 engine plane must be able fly with just 1 engine running </p>
<p>a 3 engine jet like the Lockheed L1011 or DC10 with just 1</p>
<p>a 4 engine jet with just 2. Although not a requirement, the 747, A380 c... |
65995 | <p>Qantas landed 747 for a museum on a 1800x30m runway.
<a href="https://www.abc.net.au/news/2015-03-08/qantas-jumbo-arrives-at-wollongong/6288748" rel="noreferrer">https://www.abc.net.au/news/2015-03-08/qantas-jumbo-arrives-at-wollongong/6288748</a></p>
|
92751 | <p>I'm flying C172s, and I have a question. During flight if a fuel vent (located on the left side) becomes blocked due to a bird strike or icing what should I do? Are there any auxiliary fuel vents?</p>
|
80107 | <p>If Concorde was travelling at mach 2 and FL 600 then pulled up, it would enter a trajectory that went above its normal flight altitude before diving back down. I assume that it couldn't pull up to full control surface deflection in those conditions without the wings folding, so without damaging anything, how how hig... |
106798 | <p>I was looking at some videos of the war. The russian <a href="https://en.wikipedia.org/wiki/ZALA_Lancet" rel="nofollow noreferrer">ZALA Lancet</a> drones have an X wing configuration.</p>
<p>Why?</p>
<p>I looked up this <a href="https://indaga.ual.es/discovery/fulldisplay?docid=alma991002119523204991&context=L&vid=3... |
88986 | <blockquote>
<p>can you explain the purpose of bleed valves in general?</p>
</blockquote>
<p>See <a href="https://aviation.stackexchange.com/questions/88596/how-do-variable-bleed-valves-prevent-surge">How do variable bleed valves prevent surge?</a> why bleeds are used to prevent the compressor to stall. An <a href="htt... |
97965 | <p>The Fan Pressure Ratio (FPR) is part of the Overall Pressure Ratio (OPR, ratio of highest to lowest pressure in your primary gas path from inlet to combustor).</p>
<p>The importance of the FPR depends on the application of your gas turbine, generally, higher pressure ratios are found in smaller fan diameters with lo... |
105616 | <p>We still use wheels, after being <a href="https://en.wikipedia.org/wiki/Wheel" rel="nofollow noreferrer">invented thousands of years ago</a>! Why? It is an efficient means to be able to transport something. Over the thousands of years, the wheel has improved a lot though: wood, metal, rubber to composites.</p>
<p>Th... |
72039 | <p><a href="/a/68439/">This answer</a> already answers:</p>
<blockquote>
<p>Are compressor maps such as this one, drawn for one blade row only or the whole compressor?</p>
</blockquote>
<p>The shown compressor map is indeed for an entire compressor as can be seen from the pressure ratio.</p>
<blockquote>
<p>If i... |
72173 | <p>There are basically 3 limits that the engine faces, temperature (maximum turbine entry temperature or maximum combustor exit temperature or sometimes maximum first stage HPT stator exit temperature), pressure (maximum compressor exit pressure) and stress (maximum stress in the blades and disks as a result of spool s... |
81042 | <p>The throttle friction lock in my C182 works poorly in cruise, it slowly eases out to a lower power setting. What can I do to make it better? I've attempted to turn the lock nut harder but without result.</p>
|
3791 | <p>There's a couple of cases I know of to hand. UPS upgraded their 727 fleet with glass cockpits, there's also an STC for a full DC9 cockpit upgrade. </p>
|
7627 | <p>Looking at this as a deliberate act it is really possible, but it would still take the element of chance to make it work. There is technology designed to prevent such an occurrence:</p>
<ul>
<li>ATC software. The picture that ATC sees is computer generated with lots of extra information, and it looks for potential ... |
7712 | <p>All airplanes can glide, if they couldn't they wouldn't be able to fly in the first place. When you glide an aircraft you are converting height into airspeed, which you can use to move across the ground. How far you can go across the ground for height lost is called the glide ratio for the aircraft. Gliders have a v... |
8678 | <p>It's about cost, precision, load, time to target, and risk of nuclear war:</p>
<ol>
<li>Cost: ICBMs are very expensive, even compared to a B2 bomber as a B2 can be reused over and over</li>
<li>Precision: 100 meters or so may not make much difference with a 500 kiloton nuke, but with a 500 pound bomb it's the diffe... |
95725 | <p>Well known values used in manual gas turbine calculations for the specific heat for air are 1005 J/kg/K and 1150 J/kg/K for combustion gasses. However, note that these are chosen values that are convenient for the calculation, these have no value when considering the actual gases.</p>
<p>The specific heat (at consta... |
75171 | <blockquote>
<p>I am looking to understand why turbofans have a higher specific fuel consumption when ran at lower power settings and what can be done to improve it.</p>
</blockquote>
<p>Actually, a turbofan has a higher efficiency at lower than max (read take off) performance. Why? Engines spend the majority of their ... |
94334 | <p>Generally, data found is sea level static take-off power unless stated otherwise.</p>
<p>Mass flow cannot be measured easily, so indeed, mass flow is calculated, but not how you expressed.</p>
<p>Dealing with gas turbine performance data, the best tool to calculate the mass flow is using a gas turbine simulation too... |
94694 | <blockquote>
<p>I understand that the heated intake air will burn more efficiently with the fuel and that's why recuperators increase efficiency.</p>
</blockquote>
<p>Actually that is not the reason.</p>
<p>When applying a recuperator to a gasturbine design, the heat from the exhaust is used to warm up the combustor en... |
72604 | <p>To increase the propulsive efficiency (total efficiency is the product of gas turbine thermodynamic and propulsive efficiency) we need to accelerate more mass flow less fast: this requires larger fan diameters. See e.g. <a href="/a/72586">this answer</a> which describes how the bypass air provides thrust. The formul... |
3783 | <p>It's all about cost. Concorde stopped flying because it wasn't making money. The crash actually didn't mean that much economically, it's that it happened in the time of an economic downturn and executives couldn't be seen to get on a Concorde when they'd just laid off thousands of people. The airlines and airbus had... |
9314 | <p>It partially depends on whether the military giving them up are willing to let the technology go. In the case of the F14 every single one had their engines and any novel systems destroyed completely after retirement to keep any parts from getting to Iran, which bought F14s before the revolution deposed the Shah. </p... |
12899 | <p>There are a few ways rough throttle handling on a propeller airplane can get you into trouble:</p>
<ul>
<li>Gyroscopic yaw and torque: a rotating prop creates yaw 90 degrees to its spin which are offset by control inputs (mainly rudder), throttling up or down requires changes to these control inputs. Quick changes ... |
88323 | <p><em>In effect, this question is related to <a href="https://aviation.stackexchange.com/questions/25877/in-a-turbofan-what-holds-the-spinning-axis">In a turbofan what holds the spinning axis?</a>. This question has an excellent answer that closely relates to this question (but isn't a duplicate). The following figure... |
72004 | <p>First, you should state whether you are designing an engine (increasing the TIT) or if you are doing an off design calculation for an existing engine.</p>
<p>In the case of design we gas turbine performance engineers call this design point analysis, increasing the TIT indeed would increase the efficiency, but this ... |
90036 | <p>The overall compression ratio is known as OPR.</p>
<p><a href="https://en.wikipedia.org/wiki/Overall_pressure_ratio" rel="nofollow noreferrer">Wikipedia</a> states the definition very well:</p>
<blockquote>
<p><strong>overall pressure ratio</strong>, or <strong>overall compression ratio</strong>, is the ratio of the... |
104567 | <p><a href="https://i.sstatic.net/bEI8b.png" rel="noreferrer"><img src="https://i.sstatic.net/bEI8b.png" alt="enter image description here" /></a></p>
<p>Image taken from <a href="https://thelexicans.wordpress.com/2014/01/30/cutaway-thursday-grumman-a-6e-tram-intruder/" rel="noreferrer">here</a></p>
<p>The reason that ... |
98089 | <p>What makes you think the EPR should be 1.0? Note that we are using stagnation/total pressures to determine the EPR, we are not using the static pressures. Although the nozzle expands to ambient pressure, the total pressure is significantly higher due to the fact that the nozzle is producing a high velocity jet strea... |
89218 | <p>High Pressure Turbine Active Clearance Control (HPTACC) is a system that controls the temperature of the shroud of the high pressure turbine rotor (HPT). It can cool or heat the shroud support structure using bleed air from the 4th (relatively cool) or hot bleed air from the 9th stage to control the (tip) gap (or ti... |
91833 | <p>A spool in a gas turbine consists of a compressor (or fan), a connecting shaft and a turbine, see <a href="https://aviation.stackexchange.com/a/88323">this answer</a>. The purpose of the spool is to compress air driven by combustion gasses through the turbine. If not all energy is used in the turbine, it is either u... |
9026 | <p>Be aware that if a small change is made to an aircraft, like adding or removing equipment, the airplane is typically not reweighed but it's empty weight is recalculated by adding or subtracting the weight change. Also, the empty weight c.g. is recalculated by adding or subtracting the moment change.</p>
<p>As I rem... |
9163 | <p>In the case of 727-100 and 747-100 and -200 aircraft, if both pilots were exerting opposite forces on the control column, the stronger pilot would win. In these aircraft the control columns are linked by heavy duty cables or rods. I don't believe it would be possible for human strength to break them.</p>
<p>The cab... |
42219 | <p>What was uncommon about the experience in Harare, Zimbabwe that you reference in your question was the arrival of a 747 with an inoperative APU. If I had to bet money, I would bet that they had never had that happen, or if it had, the captain had enough sense to leave an engine running. Harare's ground crew experien... |
47320 | <blockquote>
<p>Is the pilot continuously adjusting thrust levers (or power levers in the case of turbo prop) to maintain appropriate angle of attack, as the speed, decent rate and heading is controlled by the auto-pilot...?!!</p>
</blockquote>
<p>In 747-100/200 operations at the two 747 carriers I flew for, if you ... |
22881 | <p>In order to fly commercial you will need a first class medical certificate, and getting that with aspergers is going to be tough. The first consideration is the safety or people in the air and on the ground, so the criteria is conservative. Getting a first class medical would mean lots of extra hoops, even if it is ... |
20763 | <p>Instructing is the most common route, however you can also fly as a commercial pilot in part 135 operations, which would be anything 30 seats or under charter, or 9 seats or less as a scheduled flight, and <= 7500 lbs payload. <a href="http://www.researchintegrations.com/components/com_wordpress/wp/wp-content/upload... |
17675 | <p>You are confusing 2 concepts here, dihedral and winglets. What you are showing in the picture is <a href="https://en.wikipedia.org/wiki/Dihedral_(aeronautics)">dihedral</a>, which is not a curvature but an angle positive from the horizontal. This angle helps improve lateral (roll) stability in flight. This is nothin... |
97055 | <p>Gas turbine engines, e.g. a turbofan engine, are (is) designed for a specific operating point, for that point the engine operates most efficiently, any deviation from that point causes the air flow in the core of the engine to be of a different volume than the design point flow.</p>
<p>A compressor (or a fan) is des... |
88210 | <p>One engine has a diameter of 2.96 m, the area is 6.88 m<sup>2</sup>.
Airplane speed of 486 kts is 250 m/s. The density at FL280 is 0.493070 kg/m<sup>3</sup>.</p>
<p>@ Q1) In case there are 2 engines (not specified), having each an intake flow of <em>(assuming that the column of air is sucked into the engine without ... |
23476 | <p>Tip jet rotors are still being developed, none of them are ramjet powered as far as I know. The <a href="http://avimech.com/" rel="nofollow noreferrer">Dragonfly DF1</a> is tip rocket powered, while the <a href="http://pegasusheli.co.uk/" rel="nofollow noreferrer">Pegasus</a> uses air jets powered by a conventional ... |
29298 | <p>It's not a coincidence, the connection is a modular microphone standard called U-172/U. The pins it connects to are the U-173/U standard. </p>
<p>You can't just get any microphone that has that connector though, it's not aviation specific. You need to get a microphone which has the right impedance and is designed t... |
27730 | <p>In an explosive decompression the cabin air may fog, this is because of rapid cooling causing the moisture in the air to condense. How thick it is and how long it may last depends on a number of factors. </p>
<p>There are two types of smoke detectors, these are optical particle detection devices and ionization devi... |
22620 | <p>A meteorite could hit an airplane, sure. There's no known cases of it happening because meteorites which survive atmospheric entry are very rare, and airplanes are pretty small so the likelihood of it happening is extremely low. </p>
|
25255 | <p>There are a few reasons many fighter/bomber designs have 2 vertical stabilizers:</p>
<ul>
<li>one large tail produced more shear force at the root, 2 smaller tails mean less force at the vertical stabilizer root. This allows for a lighter structure</li>
<li>redundancy if one tail is damaged. The US navy philosophy ... |
58163 | <p>The <a href="https://www.boeing.com/commercial/777x/" rel="noreferrer">Boeing 777X website</a> states that this is to enable a more efficient wing (read: wider span) while maintaining the airport gate and taxi footprint of the classic 777 (which ensures airlines can use the 777X on roughly the same airports and inte... |
64004 | <p>With specifics depending on aircraft, generally the following applies:</p>
<p>FMC - Flight Management Computer</p>
<p>FMS - Flight Management System (consisting e.g. of two FMCs)</p>
<p>MCDU - Multi-Purpose Control and Display Unit (2 or 3 installed on the aircraft, the screen and keypad unit by which the crew in... |
59223 | <p>My favourite book for questions like this is <a href="https://www.iospress.nl/book/aerodynamic-design-of-transport-aircraft/" rel="nofollow noreferrer">Obert’s Aerodynamic Design of Transport Aircraft</a>. It shows pressure distribution on the 727 wing and gives some AIAA papers as sources. If you track these down, ... |
54692 | <p>Cooling the gear after takeoff is one likely scenario, if the aircraft had only a short time on ground between landing and takeoff. Another scenario (from memory - standing by to be corrected) is an inoperative wheel brake on one of the main gear wheels, where sufficient time must be allowed after takeoff to ensure... |
73196 | <p>The outer kink on A340-600 wing is located just outboard of the outboard engine, note trailing edge kink in <a href="https://en.m.wikipedia.org/wiki/Airbus_A340#/media/File%3AA340FAMILY2v1.0.png" rel="nofollow noreferrer">planform drawing</a>.</p>
|
67930 | <p>Most aircraft I know use either linear transducers <a href="https://en.wikipedia.org/wiki/Linear_variable_differential_transformer" rel="nofollow noreferrer">LVDTs</a> or rotary transducers <a href="https://sensing.honeywell.com/000657-1-en.pdf" rel="nofollow noreferrer">RVDTs</a> for this purpose.</p>
|
68118 | <p>It seems to be a <a href="https://en.m.wikipedia.org/wiki/Panavia_Tornado" rel="nofollow noreferrer">Panavia Tornado</a>.</p>
|
49601 | <p>The Airbus A400M military transport was equipped with a <a href="https://www.flightglobal.com/news/articles/airbus-zero-major-issues-from-a-m-flight-tests-337517/" rel="noreferrer">rocket engine</a> pointing downward which could produce a 5-second burn during testing of deep stall characteristics. It isn’t standard ... |
48151 | <p>On a large aircraft, an often cited trick is to use 3 x altitude to airfield, divide it by 1000, and then that is still air distance from airfield to top of descent in nautical miles. For example, from 30000ft, TOD would be 90NM out. This works to roughly achieve an idle descent (if the aircraft’s glide ratio is aro... |
88968 | <p>Valves open at low speed to prevent the blades to stall. At low spool speed, or a low power setting (low power setting => less fuel added to the cycle => less power in the turbine and as such less power available for the compressor), the volumetric flow through the fixed geometry compressor passage becomes too large... |
72003 | <p>Yes they do use a lot of extra fuel, but the amount is depending on the operating conditions (Mach flight speed and altitude)!</p>
<p>Comparing MIL (military) power setting (maximum power without reheat) to MAX power setting (engine will be in MIL power, but the reheat will be scheduled and the exhaust nozzle opene... |
33558 | <p>The investigation is still on-going so I will stick to what is factually known. An airplane's range through the air should not be confused with travel over the ground, actual distance over the ground can vary significantly depending on the winds aloft. A significant tailwind will allow an airplane to travel farther ... |
52114 | <p>There's 2 types of radar in ATC, there's Primary Radar which gives bearing and distance, but it can't give altitude, which is why there is Secondary Surveillance Radar (SSR) which interrogates airplane transponders. When a transponder is on and set to mode C or S the controller will see flight level on their screen.... |
52775 | <p>London City certainly has its challenges, with a steep approach and high rise buildings in close vicinity to the short runway, at the same time you have all sorts of places to divert to: Southend to the east, Stanstead and Luton to the North, Heathrow to the west, Farnborough, Gatwick, the list goes on. All of these... |
79241 | <p>It isn't practical for a number of reasons:</p>
<ol>
<li>Intentional stalls are inherently dangerous. Stall-spin accidents are a major cause of accidents, stall recognition and recovery are taught specifically to avoid stalls. Some airplanes have docile stall characteristics, but even those can still bite you. A Ce... |
72051 | <p>A performance increase after a compressor wash is expected to happen, but it does not return to the original performance as there are more degradation mechanisms at play. <a href="/a/72038/">This answer</a> explains that organic build-up causes a change in airfoil shape causing the recoverable performance degradatio... |
68313 | <p>So, I want to see the effect of altitude on the compressor characteristic of a single spool & double spool turbofan engine at constant flight speed and TIT (turbine inlet temp). </p>
<p>I am aware that as the altitude increases, density decreases, mass flow decreases which ultimately reduces thrust. </p>
<p>As wel... |
42594 | <p>I'm doing a project on the Enola Gay and I wondered which country started the tradition of naming aircraft?</p>
|
80877 | <p>Don't keep the electric master on in a fire to lower the landing gear. First off there's time: In any fire seconds matter, the sooner you eliminate the ignition source for the fire the better chance you have of controlling it and keeping it from spreading. The fumes from an electrical fire are toxic and can impair y... |
36659 | <p>You are very close. Your explanation of static pressure is correct, but not your dynamic pressure. Ram air pressure is what the pitot tube measures, in other words the total pressure experienced. It is your airspeed gauge which measures dynamic pressure by mechanically (in the case of a traditional pitot-static syst... |
45044 | <p><strong>Short Answer</strong></p>
<p>Batteries would need to be somewhere around 16.7MJ/kg to give the same range and performance as liquid fuels, this is about 18.5 times the capacity of the best lithium-ion batteries. Price-wise it will cost about 30-35% to charge your airplane as opposed to fill it with liquid f... |
40870 | <p>There's two schools of thought. First is the keep the engine on school because keeping the engine on:</p>
<ul>
<li>Gives you more control of the airplane</li>
<li>Gives you the option to go around </li>
<li>Keeps the procedure simple and allows the pilot to concentrate on a good touchdown</li>
<li>Keeps the dynamic... |
48414 | <p>The reason for the failure is important actually. If <strong>all</strong> the electrical systems on an EC135 helicopter fail in your classic EMP scenario then the helicopter has to make an emergency landing as the jet engine is run by a computer system which requires electricity. A power failure of that system would... |
46651 | <p>Civil aircraft certification requirements for airliners demand normal operations be possible up to 2.5g and down to -1g in clean configuration up to design manoeuvring speed, reducing above that speed. Googling EASA CS25 should show this for European-certified aircraft. The same design requirements furthermore speci... |
56430 | <p>In quotable literature, I recommend <a href="https://books.google.de/books?hl=de&lr=&id=axPvAgAAQBAJ&oi=fnd&pg=PR1&dq=obert%20aerodynamic%20design%20of%20transport%20aircraft" rel="nofollow noreferrer">„Aerodynamic Design of Transport Aircraft“ by Obert</a>. In other useful stuff, there is a very useable (but not pr... |
56521 | <p>Aviation in general is very much driven by safety. Most topics covered during training therefore directly or indirectly are intended to teach how to avoid „dying as a consequence of flying“. </p>
<p>There are many other hobbies where the risk of dying is much higher, I guess :)</p>
<p>The particular scenario you a... |
59268 | <p>It’s a customer option (i.e. the operator can choose and specify) to switch between the two; presumably by pin programming the computer responsible for generating the display symbols.</p>
|
58060 | <blockquote>
<p>The two aircraft had been delivered to the RAAF at Luke in September and October and delivered to Williamtown via Hickam Air Force Base in Hawaii and RAAF Base Amberley, south-east of Brisbane.</p>
</blockquote>
<p>From <a href="https://www.defensenews.com/global/asia-pacific/2018/12/10/f-35-fighters... |
40930 | <p>I know of no source for the A350. </p>
<p>I was moderately surprised to learn, however, that there are surprisingly well-modelled drag curves for many modern jet transport aircraft including the Boeing 777 in a book called <em>Aerodynamic Design of Transport Aircraft</em> by Obert. They will in all probability not ... |
63757 | <p>From the <a href="http://support.diamond-air.at/fileadmin/uploads/files/after_sales_support/DA42_Twin_Star/Airplane_Flight_Manual/Basic_Manual/70105e-Rev8-complete.pdf" rel="noreferrer">DA-42 TDI Approved Flight Manual</a>:</p>
<p>Fuel filter is not heated and can clog if the Diesel fuel flocculates. Jet fuel does ... |
93977 | <p>In reference to a rotorcraft turbine engine (turboshaft):</p>
<p>"How can a power turbine rotor speed N2 (or Npt) and rotorcraft rotor speed Nr both be at 100 % while the gas generator speed N1 (or Ngg) is at 85 % and similarly both the N2 and Nr can be at 100 % while the N1 is at 99 %?"</p>
<p>I know the two turbin... |
82839 | <h1>Combined Cycle Power Plant for Hybrid Aeroplane.</h1>
<p><a href="https://i.sstatic.net/wjRiJ.jpg" rel="nofollow noreferrer"><img src="https://i.sstatic.net/wjRiJ.jpg" alt="enter image description here" /></a></p>
<h2>Background</h2>
<h3>Inverted Gas Turbine</h3>
<p><a href="https://www.dlr.de/vt/en/desktopdefault.... |
84700 | <p>I ask this question because I read somewhere that SR-71 was designed in 60's with hand calculations and drafters and when engineers later tried to improve the design with modern computers they found that they got original design exactly correct!</p>
<p>I take this with a pinch of salt but I find it intriguing that e... |
86281 | <p>There are plenty of 3D printing methods available now with FDM being the most common. In my experience as small fixed wing UAV designer, all the 3D printing processes that are financially viable always under perform in comparison to alternatives. I can tell you the main issues I have encountered leaving the printing... |
43201 | <p>Yes, if you could increase the combustion temperature in the hot section of a gas turbine, you could dramatically increase the efficiency of the engine. The problem of course is finding materials which can sustain structural integrity in these regimes for long service lives and still contain the hot gas; we are cur... |
52563 | <p>Keeping too much speed in an approach in any airplane can be risky depending on how much runway you have as it all has to bleed off before you can stop. It's a great way to end up in a hedge. Extra airspeed means you'll either float in ground effect for a very long time, or if you somehow manage to get the wheels do... |
64476 | <p>The engine wouldn't fail. Avgas powered engines use 2 magneto systems which are independent of the battery and alternator, so if your alternator dies or you lose the electrical system it will run as if nothing happened. Starting it does require the battery and electrical system though to run the starter motor. Aviat... |
66399 | <p>Military training doesn't teach releasing the stick as a universal recovery technique, I'm not sure where that came from. Spin recovery technique is dependent on the airplane, and varies depending on whether you are upright or inverted. The standard technique is PARE:</p>
<ol>
<li>Power off</li>
<li>Ailerons neutra... |
31664 | <p>At the risk of sounding too broad, I want to better understand the complications of jet engines. This time, I'm asking about extra "stuff", which unfortunately I have no better name for since I don't know what it is.</p>
<p>I'm familiar with the basic cycle of jets. Compressor stages draw in air and pressurize it, c... |
19571 | <p>Well, the GEnx-2B67 engines with which the 747-8 is fitted each produce a maximum of <span class="math-container">$ 284\ \mathrm{kN}$</span> thrust (according to its Wikipedia <a href="https://en.wikipedia.org/wiki/General_Electric_GEnx#General_characteristics" rel="nofollow noreferrer">page</a>). This translates to... |
82598 | <p><strong>Afterburners are subsonic but not because of that equation.</strong></p>
<p>Afterburners are typically subsonic for a couple of reasons. First combustion is easier at low speeds. While supersonic combustion is possible (see <a href="https://en.wikipedia.org/wiki/Scramjet" rel="nofollow noreferrer">scramjets<... |
88188 | <p>This is an image of a set of questions that are relevant to an Airbus A380 type of aircraft (4 engines):</p>
<p><a href="https://i.sstatic.net/wpk52.png" rel="nofollow noreferrer"><img src="https://i.sstatic.net/wpk52.png" alt="enter image description here" /></a></p>
<p>As the answers are incorrect, I'd like to und... |
94631 | <p>I understand that the heated intake air will burn more efficiently with the fuel and that's why recuperators increase efficiency. The part I don't understand is that if efficiency is going up, why isn't the power output also not increasing along with efficiency? For example, if we used to make 500 hp from a free sha... |
86898 | <p><a href="https://i.sstatic.net/neH1r.png" rel="nofollow noreferrer"><img src="https://i.sstatic.net/neH1r.png" alt="Constant Pitch Propeller increasing RPM keeping TAS constant" /></a></p>
<p>Assume I am flying straight and level with power setting 21 inches of MAP and 2300 RPM with TAS=100 kts, now I change my Prop... |
65784 | <p>Technically possible? Yes. In practice it's so difficult to do that we use helicopters, tilt rotors and VSTOL technology instead. </p>
<p>The byproduct of lift is drag (called induced drag), so if you have a wing with a shape and size that delivers high lift at low speed it will generate a great deal of drag at hig... |
62006 | <p>No, there are several reasons:</p>
<ul>
<li>Fragility v Efficiency v Weight: the most efficient solar panels are rigid and heavy, which is bad for a wing structure. Flexible and light panels do exist, but they are half the efficiency. They also have limitations to how much flexing they really can take, the constan... |
74435 | <p>An IR sensor detects objects that are at a higher (or lower but that's not how missiles work) temperature than the surrounding environment, most of the helicopter won't be that much hotter or cooler than the air around it, so wouldn't distinguish it much unless you get very close. Jet engine exhaust is much hotter t... |
31645 | <p>Its a bit out of date but <a href="https://www.youtube.com/watch?v=kr483zBbQKw" rel="nofollow">this video is a good resource</a>.</p>
<p>All check rides are a bit different since the DPE has some room in what he can/does do. However the FAA does require particular things. Many people (myself included) got their tic... |
29892 | <blockquote>
<p>Are there other manufacturers of ADS-B equipment that are recommended
(by AOPA, FAA, or any other respectable group)?</p>
</blockquote>
<p>There are <a href="http://www.mypilotstore.com/MyPilotStore/sep/11028?gclid=CjwKEAjw-_e7BRDs97mdpJzXwh0SJABSdUH0iJWpH05GutC46MzZ6vC4Ky60Tq8t0ae-JGjFs2H9HBoCtQfw... |
84795 | <p>I have a test bench that can test the thrust of a propeller with my electric motor, is there a way that I can calculate the propeller efficiency (η<sub>p</sub>)?</p>
|
73629 | <p>I am just wondering if supplying compressed hydrogen to a gas turbine (combustor) would be a better fuel as it has three times the octane rating of kerosene. It just seems better all around.</p>
|
97404 | <p>I am a student carrying out a project focused on efficiency on aircraft. I have arrived at an idea I believe to be feasible. I am looking for suggestions, specification of what I would need, and any general tips and advice if this idea is actually reasonable.</p>
<p>I have found, using another page on this forum, th... |
98070 | <p>I'm looking for an answer that at least addresses the fundamental thermodynamics of a jet engine.</p>
<p>Jet engines use a Brayton cycle to get useful work out of a heat source. An ideal Brayton cycle engine has the input and output pressure be the same. If Exhaust pressure is greater than inlet pressure, then that'... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.