post_id stringlengths 1 6 | body stringlengths 1 53.8k |
|---|---|
36212 | <p>It depends on the difference between the predicted wind speed for the winds aloft vs what was actually up at that altitude at a given time.</p>
<p>It also depends on doing your winds aloft calculations correctly and accounting for both the wind speed AND angle relative to the direction of flight. Take the winds at... |
105315 | <p>@John K makes many salient points in that to obtain the major advantages of carbon fiber construction you would forego the tube and joint structure in favor of a custom made monocoque structure with limited internal structural members. The tube and joint method you describe above offer little advantages over a prop... |
100205 | <p>I'm asking this question since I can't intuitively understand how the acceleration of mass flow and therefore the increase of its momentum can actually mechanically act on the combustion chamber walls and nozzle walls to induce momentum thrust.</p>
<p>For example, when it comes to pressure thrust induced by pressur... |
100194 | <p>According to <a href="https://en.wikipedia.org/wiki/English_Electric_Lightning#Development" rel="nofollow noreferrer">Wikipedia</a>:</p>
<blockquote>
<p>The Lightning F.6 was originally nearly identical to the F.3A with the
exception that it could carry two 260-imperial-gallon (1,200 L) ferry
tanks on pylons over th... |
82755 | <blockquote>
<p>So if I understand that correctly the CG can be more forward when the aircarft is heavy.</p>
</blockquote>
<p>Not really, although I guess you could say the index can move "forward" because of the way the form is drawn, but the index is not the CG. Indices are a composite number, namely the moment divid... |
15200 | <p>Equivalent airspeed is not speed at all. It is dynamic pressure, indicated as speed at which that dynamic pressure would occur at sea-level standard conditions. And indicated airspeed is equivalent airspeed plus measurement errors (calibrated airspeed is cleared of those errors, that can be effectively estimated).</... |
59923 | <p>Basically, yes. The difference between shrouded and unshrouded propeller is that the shrouded one can produce uniform thrust across the diameter, while for the unshrouded one the thrust decreases near the tips.</p>
<p>That way a shrouded propeller accelerates more air than an unshrouded one <em>of the same diameter... |
73997 | <p>I was looking up V-speeds for C172. I don't have easy access to an official copy of the POH, but <a href="https://www.manualslib.com/manual/1156485/Cessna-172-P.html" rel="noreferrer">online</a> I found:</p>
<ul>
<li><span class="math-container">$V_y$</span>, best rate of climb speed (at sea level): 76 KIAS (<a hre... |
53110 | <p>Propellers are more efficient, but they only work well when their tip speed is still subsonic, which limits the maximum speed of propeller-driven planes.</p>
<p>Jet engines on the other hand are inefficient at low speed, but their efficiency increases at higher speeds, and they can be designed for much higher fligh... |
97910 | <p>I mainly fly in the UK and Europe, however I trained in the US and have flown there a few times since. I have probably 50 hours in total in the US.</p>
<p>I can tell you that almost without fail, every airfield I have ever flown from anywhere in the world has always had some level of plane spotting activity. It is a... |
80317 | <p>I have always noticed there is what appears to be three lights on the center column, which separates the pilot and copilot window of the Airbus A320 family. From the looks, the center light is red and two surrounding lights are white. They also seem to be present in other aircraft, like the A350. Though there they a... |
91459 | <p>A carb overhaul should fix the problem. Your float could be set at the wrong height, sticking. Your needle and seat could be leaking and not maintaining the proper fuel level in the bowl of the carburetor. You could have varnish if a plane has been sitting for some time on the tip of the needle, making the valve not... |
86612 | <p>Why adjust for lift only in cruise? Why not benefit throughout the flight envelope?</p>
<p>One aircraft that had a wide, lifting fuselage was the <a href="https://en.wikipedia.org/wiki/Lockheed_SR-71_Blackbird" rel="nofollow noreferrer">Lockheed SR-71 Blackbird</a>. The fuselage was widened with sharp "chines" (a te... |
72602 | <p>"<strong>Sterile cockpit</strong>" means also that the cockpit crew shall only perform the duties that are required for the safe operation of the aircraft. Any paperwork, work on the pedestal (the table on AIRBUS) and non-essential conversations between the cockpit members and crew should be avoided.</p>
<p><strong... |
72520 | <p>You won't like this answer but fixed wing VTOL aircraft with gimbals thrust actual fits many rocket/missile type of aircraft, which include:</p>
<p>1) High altitude anti-aircraft missiles, such as RIM-161 SM3 and S400 systems. Fins at high altitude doesn't work that well, so thrust vectoring is the main control aut... |
72393 | <p>Actually, there's one example already: <a href="https://en.wikipedia.org/wiki/Lockheed_Martin_F-35_Lightning_II#F-35B_2" rel="nofollow noreferrer">F35B STOVL</a>.</p>
<p>It's not so impossible I guess. When the efficiency and weight penalty is offset by some other requirements, e.g. ground clearance (next gen 737-M... |
54556 | <p><strong>I was wondering which one was better and why.</strong> </p>
<p>When done equally right they are equally good.</p>
<p>However, FBW makes it possibly to improve the quality of control beyond what's determined by the aerodynamics (e,g, making unstable airplanes stable, or making hard-to-fly airplanes easy to ... |
79112 | <p>The limiting factor for U2's speed is not the wing, but the engine.</p>
<p>According to <a href="https://www.nasa.gov/sites/default/files/atoms/files/unlimited-horizons.pdf" rel="nofollow noreferrer">Unlimited Horizons</a> (also <a href="https://www.cia.gov/library/video-center/video-transcripts/u2-developments.html... |
65251 | <p>SOPs in my company prevent the use of tiller above 20kts.(it’s a limitation)</p>
<p>Note that on our fleet rudder pedals can deflect the nosewheel up to 6deg (compared to 75deg on tiler), reducing linearly to 0deg at 130kts (Airbus 320), so there is still some limited turning authority until the rudder takes over.<... |
51027 | <p>123.45 is commonly used as an (unallocated) air-to-air frequency, although depending in your location it might not be officially sanctioned</p>
<p>You may use that for chat or formation flying, but it will definitelly not be private</p>
|
56554 | <p>Just want to jump in with an answer (rather than a comment) as it seems more than one answers might want to suggest that maximum ceiling on current aircraft is dictated by (available) engine power. </p>
<p>Flying at higher altitudes: yes, you lose density, yes, you lose a bit of lift, because of that, and yes, you ... |
55465 | <p>“PITCH,PITCH” is called out on excessive pitch attitude durring flare or excessive pitch rate (ie. FWC estimates that pitch att WILL be exceeded shortly). </p>
<p>This can cause an occasional spurious trigger when the pilot is a bit late&abrupt in his flare and triggers quick nose up defletion, even though he is ar... |
50865 | <p>Especially once you get into the bigger jets/bigger engines where such fuel saving would make sense, you need to consider reverser usage and engine cooldown time: the larger the airplane, the more likely it will need to use full-thrust when deploying reversers to slow down after landing.</p>
<p>Shutting down an eng... |
56981 | <p>Oau, a lot of answers and almost nobody touching on the real issue.</p>
<p>Propellers will produce a thrust that decreases with increased speed. Since power= thrust x speed, this means the engines will produce (more or less) an (almost) constant power throughout the speed range of the aircraft. Given a specific fue... |
72324 | <p>While not technically an answer: I just want to point out that (most) LCCs do not have the financial means and public image credit to survive even a single minor incident or crash. </p>
<p>A simple runway overrun or engine fire might be enough to literally bankrupt the company within days, and (most) LCC managers a... |
43568 | <p>this is speculation, but if you ask <strong>why</strong> we lower gear <strong>between F2 and F3</strong>, I think Koyovis is getting quite close to the potential answer:</p>
<p>Each configuration has a reference speed: Green Dot, S speed, F speed. The biggest difference is between S and F ( ie after deploying fla... |
54436 | <p>I'm surprised no-one has attempted to answer this question, as it is mostly a pilot's daily job to guess a pitch change that would give a certain rate of climb. :-)</p>
<p>This will not be a technical answer, but I suspect some of my attempts at controlling the rate can be ported to a PID algorithm.</p>
<p>Keeping... |
35418 | <p>Is <a href="https://www.youtube.com/watch?v=7FvEe9rYc3o#t=25m30s" rel="nofollow noreferrer">this animation of the angle of attack sensor</a> in this video from 25:30 to 25:50 correct? It seems like motion of the sensor is the opposite of what it should be based on the angle of the aircraft. For example, given an a... |
35480 | <p>If I'm over New York City, and sunrise is 6am, I will see the sunrise earlier when I'm at 40,000 feet on the plane. <br>
I think that latitude plays a role here, but using NYC as an example, how much earlier/later (later for sunset, as I will see the sun for a longer period at that height) are these events on a plan... |
86933 | <p>Do Flaps 10 really do anything performance-wise other than reducing ground roll and distance over a 50-foot obstacle? If not worried about clearing an obstacle, does a Flaps UP-normal takeoff make more sense (Better climb performance since no drag from Flaps) in the C172S?</p>
|
35856 | <p>Timezone is always the same for each state, correct? It seems that all you need is the state. Probably that is why their is no official data with a time zone for each airport. From <a href="https://enasr.faa.gov/eNASR/nasr/Current/Airport" rel="nofollow noreferrer">eNASR</a> I just entered "*" for "Airport ID" and (... |
35868 | <p>I've been doing a research project for mathematics which involves calculating the relationship between lift and angle of attack. While this may seem pretty easy, it's not for a 12th-grade student like me.</p>
<p>We all know that the pressure differential is 1/2 ρ〖(v2-v1)〗^2, where v2 is the airflow velocity over th... |
55558 | <p>In airfoils, the aerodynamic center is usually found close to the quarter chord point, but for quick calculations, we assume it lies on the quarter chord. </p>
<p>What I am looking for, is if there is any way to find a rough estimate as to where the aerodynamic center is actually located on a tested airfoil - given... |
24622 | <p>This depends on the airframe and where the engines are mounted. The father inboard the engines the less of an issue a slight variation in thrust will cause. But as mentioned the rudder is the general correction for this yaw. </p>
<p>The closest thing I can think of (and its not really for thrust balance although t... |
53461 | <p>This can depend on what the actual instrument is and what (if anything) the glass is coated in. </p>
<ol>
<li>In some cases the instrument may not have a glass panel at all, it may be acrylic or any other type of similar material. You are mot likely seeing sun damage in this case. </li>
<li>It may be mold or fungus... |
53474 | <p>You do not need a Class B endorsement for your PPL Check ride. </p>
<p>By the time you get to you check ride you should have <a href="http://www.soargbsc.com/inststud/instructor/endorse.pdf" rel="nofollow noreferrer">the first 8 endorsements from this list, provided by the FAA.</a></p>
<p>I will add one caveat to ... |
56769 | <p>I am trying to make a wing where slats automatically deploy once it hits a higher angle of attack, let's say right before stall.
I need to roughly estimate the forces and moments acting on the undeployed slat.</p>
<p>Here is a sample airfoil with the pressure distribution superimposed:</p>
<p><a href="https://i.s... |
50685 | <p>My final year design project for my undergrad (mechanical) looked at designing a UAV to get the best lift to drag ratio under several constraints (wingspan, max weight, etc.) set by our advisor. One of the tools we used to find the optimum reference area (S) for our preliminary design is a matching chart. An example... |
44459 | <p>I would like to know more about the general procedure used in modeling wakes for 3d panel methods. </p>
<p>Specifically I am looking at the effect of surfaces(fuselage and horizontal stabilizer) on the wake.</p>
<p>Is it better to merge wake panels with body panels or to allow the wake to clip through the body? Ar... |
64807 | <p>The moisture stays at the surface because the air speed at the surface is essentially zero. (No-slip condition)</p>
<p>A solid body moving through a fluid develops a boundary layer around it, which is caused by friction between the surface and the air.</p>
<p>A boundary layer is a region of slow moving air relativ... |
53596 | <p>The different systems generally have to do with ILS landings and the ability to <a href="https://aviation.stackexchange.com/questions/31336/what-counts-as-runway-in-sight-when-flying-an-ifr-approach-to-minimums">have the runway in sight</a>. As <a href="https://www.aopa.org/news-and-media/all-news/2011/november/01/2... |
25342 | <p>There are some planes out there that exist in both configurations. One of the more common and first that comes to mind is the popular <a href="https://en.wikipedia.org/wiki/Cessna_150" rel="nofollow noreferrer">Cessna 150</a>, the <a href="https://en.wikipedia.org/wiki/Cessna_172" rel="nofollow noreferrer">Cessna 17... |
25307 | <p>Specifically in your case you may have lost more altitude in the turn than your instructor or your turns were less coordinated etc. A wide variety of other variables that are hard to note with out accurate course data could have led to your outcome. You would have had to enter the maneuver at the same place/altitude... |
56757 | <p>Based on the Linkedin page, this is a portion of an IAE V2500 turbofan. Looking at the following images of the engine (in modules and awaiting final assembly), I can pick out a view that is really similar to the image you have up, namely the module of the engine in the bottom right hand corner of the image or the o... |
69626 | <p>My initial response is that, if you have a wedge-shaped airfoil on a glider, what sort of spec are you designing to? Most of the time, gliders are low-subsonic aircraft with airfoils similar to <a href="https://aviation.stackexchange.com/questions/64848/are-there-any-full-size-airplanes-flying-with-a-selig-s1223-ai... |
39713 | <p>I always thought the yellow speed line (vs digital in a box) is a way of indicating the speed (and speed trend) are aproximations and subject to change ( ie. indicating a speed of 134.4345 kts implies a very high precision, which the ADR does not have)</p>
<p>In reality (after taking a long time to get used to it) ... |
47431 | <p>I’ll try my hand at a more ‘scholastic’-aviation approach:</p>
<p>The normal procedure taught in flight school for initiating a climb is <strong>P-A-T</strong>. That is <strong>Power-Attitude-Trim</strong>. </p>
<ol>
<li><p>You increase <strong>power</strong> on the engine(s) first.If left alone, the plane will s... |
45003 | <p>Windshear alert will not occur while on the ground on Airbuses; you will only get the alert once airborne, after Vr. I suspect most manufacturers have implemented a similar feature, perhaps, in order to prevent pilots from rejecting after V1.</p>
<p>What to do is usually a precise and exact procedure. While it does... |
44831 | <p>A lot of answers (all corect) come from a physics/mecanics point of view,so I’ll try to come up with a more-aviation-themed answer: <strong>Trim speed</strong></p>
<p>Your airplane is trimmed for a specific speed. With no movement on the control stick the plane is designed to keep whatever airspeed the plot has tri... |
64933 | <p>Edit: I know that the suction holes reduce the boundary layer; I am wondering if there is a reason why they are placed far ahead of the engine’s intake. My thinking is that the long duct past the holes will form its’ own boundary layer, hence reducing the effectiveness of the holes.</p>
<p>Looking at the picture of... |
36751 | <p>In general, it is difficult to convert to EASA. You can find more information <a href="https://www.ilent.nl/onderwerpen/transport/luchtvaart/general_aviation__luchtsporters/Brevetten_zweefvliegen_en_ballonvaren/index.aspx" rel="nofollow noreferrer">here</a> however I suspect the easiest method will simply be for you... |
38786 | <p>There are now ICAO designators for the A3XX Neo aircraft:</p>
<ul>
<li>A319 Neo: A19N</li>
<li>A320 Neo: A20N</li>
<li>A321 Neo: A21N</li>
</ul>
<p><a href="https://en.wikipedia.org/wiki/List_of_ICAO_aircraft_type_designators" rel="nofollow noreferrer">Source</a></p>
|
90291 | <p>The <a href="https://de.wikipedia.org/wiki/Datum/Zeit-Gruppe" rel="nofollow noreferrer">German Wikipedia</a> gives also some details about then time zones which are not full hours. However, the topic does not provide a references, so it could be false.</p>
<blockquote>
<p>For time zones that differ from UTC by odd m... |
75632 | <p>1) For any thermal engine, energy efficiency is directly correlated to temperature, while power density is indirectly correlated to temperature as well. Because radiator temperature isn't very high, a jet engine using radiator heat is very inefficient and bulky.</p>
<p>2) For a ICE engine, majority of waste heat is... |
86719 | <p><strong>Now, DC is easier to produce than AC and easily to inverted to AC</strong></p>
<p>To produce AC of a specific frequency, you will need one of below</p>
<ol>
<li>An engine that rotates at a fixed rate.</li>
<li>A variable transmission box that normalizes the rotation rate.</li>
<li>Produce DC somehow then inv... |
37019 | <p>What (if any) sort of pilot authentication systems do fighter jets have?</p>
<p>Could anyone with the required skills simply take the aircraft or is a key or authorization code required?</p>
|
44770 | <p>I suspect one of the bigger issues with automated ATC is you will always need human controllers to be there to take over when the automated system fails.</p>
<p>Moreover, since the job of an ATC controller is a difficult one that requires a great deal of mental dexterity to translate a two dimensional display or mo... |
43830 | <p>Years ago I was on a flight from San Francisco to Los Angeles, a 737 if I remember rightly, and was sitting just behind the wings and could not help noticing the flaps were partly extended for the whole flight. </p>
<p>I thought they looked odd out the window but did not bother mentioning it to the cabin crew since... |
43823 | <p>Although technically feasible, having wireless communication between cockpit and the various end-points around the aircraft produces significant issues. </p>
<p>Primarily:</p>
<ol>
<li><p>Channels: Unless you use multiple frequencies, each sensor or driver would need it's own radio channel. Add in redundancy and y... |
29885 | <p>Civilian jump planes often have some sort of similar (but much simpler) deflector in front of the door used for exiting the aircraft. It's not difficult to hold yourself on the plane, but a jump plane slows down when dropping jumpers, and the engines don't have anything like the prop blast of this plane. I have no i... |
106551 | <p>Pilots do not 'tend' to believe our instruments - we are trained to believe them. We have to, because our senses are not reliable in such situations. Yes, if you follow your gauges and ignore what the seat of your pants is telling you, such a situation is completely and easily recoverable, provided you have enough a... |
24743 | <p>In the context of fuel, jettisoning fuel would imply that the fuel is in a container that can be detached while in flight. In the linked image, the large tank below the main body is an external fuel pod that can be <em>jettisoned</em>. <a href="http://www.elbitsystems.com/elbitmain/pic/Cyclone_F-18_Parts_[570x370].j... |
58608 | <p>There was recently news regarding a story of a former US military pilot who crash landed his plane somewhere in the southwest. He was accused of flying the airplane to Mexico to deliver it to the Russians. The Russians then supposedly dropped him off in the desert from which he walked back to civilization. I believe... |
46126 | <p>Already great answers here but I`d also like to add...</p>
<p>In the 50's it was the atomic age. We thought splitting the atom was the best thing since sliced bread. But that was at a time when we, as humans, had no idea of the long term effects of radiation and radiation poisoning. It really was not until a decade... |
46181 | <p>If you look closely at your drawing you will see the cables are not really simple pull cables but really act like steel belts. That is, there is a pulley at each end and when you actuate the control the cable is rotated around the system in a loop.</p>
<p>The end pulleys and or idler pulleys are spring loaded to ma... |
49013 | <p>I have flown in sleeper class with British Airways flying overnight from Toronto to LHR.</p>
<p><a href="https://i.sstatic.net/vPc2E.png" rel="noreferrer"><img src="https://i.sstatic.net/vPc2E.png" alt="enter image description here"></a></p>
<p>It was an expensive luxury which started out great, but when fully rec... |
40988 | <p>One also needs to remember it was not the jet blast that killed this unfortunate lady (condolences to family), but rather striking the rather awkward and hard retaining wall behind her.</p>
<p><a href="https://youtu.be/LV28AL0k1kY?t=31" rel="noreferrer">Similar incident...</a></p>
<p>Although a small deflection fe... |
43825 | <p>You are seriously over estimating the technical capabilities of the time. </p>
<p>The gun-sight is not much more than an intricate slide-rule. You had to feed it information about the target size/aircraft type and it used the gyro information from your own aircrafts turn rates to project a reticule circle on the gl... |
45343 | <p>This is an old Bernoulli explanation of how wings work that is miss-leading or just plain wrong. The air is not moving, the wing is. So to answer your question, since the air is not moving.. it can't slow down.</p>
<p>As the wing moves forward, the air is compressed under the wing and decompressed above it. That di... |
23328 | <p>To expand on an earlier answer at some towers Controllers use prominent landmarks in the distance to give a rough guide to RVR. They know if they can or cannot see a particular building what the RVR is. This is only used as a last resort when equipment malfunctions, but it works.</p>
|
23483 | <p>Last time I boarded a flight (Boeing 717 with Delta, with assigned seats), the passengers were split into 4 groups and allowed to board the plane in an order that filled seats from front to back. I can understand why first/business class could go first, since they pay more. But the rest of the passengers pay the sam... |
23561 | <p>I saw this pretty cool video a while ago:
<div class="youtube-embed"><div>
<iframe width="640px" height="395px" src="https://www.youtube.com/embed/TUgwaKebHTs?start=0"></iframe>
</div></div></p>
<p>It gives an intuitive discussion of gyroscopes.</p>
<p>On another level though, it boil... |
89615 | <p>Well again, a glider would have zero effect on a stall speed of the tow plane, because the tow plane technically does not have a stall speed (remember wings only stall if they exceed the critical AoA - this can happen at any airspeed and/or at any flight attitude).</p>
<p>Now most tow planes use a release hook mount... |
89392 | <p>Yes you can. You must, however comply with the terms of §91.711, §91.713 and §91.715, and obtain a special flight permit for the proposed operation, but it can be done.</p>
<p>For reference, §91.711 reads:</p>
<p>a) General. In addition to the other applicable regulations of this part, each person operating a forei... |
74172 | <p>As stated above in the last answer, it’s turbodiesel powered. Like the DA-42 and DA-62, the engine is basically power by wire, using a primary and secondary Engine Control Unit (ECU) computers, each with a dedicated battery backup, both for engine control and control over the constant speed propeller.</p>
|
69863 | <p>It depends upon what the manufacturer recommends on the form of the AFM in cockpit placards. Certain aircraft do allow extension of the flaps outside the white arc for certain flap settings. For example the Cessna 182T is placarded for 10° flaps at or below 140 KIAS, 20° flaps at or below 120 KIAS and 30° flaps at... |
74733 | <p>Variable geometry is not used in commercial aircraft design for the same reason that they initially became popular in the 1960s but have fallen out of favor in more recent times: any kind of aerodynamic performance gains associated with the design is not worth the additional weight increase, and subsequent decrease ... |
77172 | <p>It apparently increased the roll rate of the aircraft and made a more optimal design for low altitude operations and ‘air-to-mud’ work happening more and more near the end of the war. The cropped wing Spits were often paired with superchargers equipped with cropped impellers optimized for lower altitude flight, tho... |
73932 | <p>Well the flight in question was operating under VFR nor had the pilot filed an IFR flight plan. The flight in question had an off airport destination which would have only allowed for a descent and landing under VFR operations. Could the pilot have filed an IFR or composite IFR/VFR flight plan? It’s possible. Bu... |
30255 | <p>Flow separation makes a lot of noise. Usually, it is masked by engine noise and/or damped by insulation. Any pilot of a light plane may climb to a safe altitude and then idle the engine, start a glide, and then slowly pull the stick until the wings start to stall. He will hear a lot of noise, and feel a strong vibra... |
30696 | <p>As far as I have come across there was a guy who had mentioned of working with <a href="http://diydrones.com/m/discussion?id=705844%3ATopic%3A743321" rel="nofollow">36 motors on a multirotor</a>.</p>
|
89734 | <p>Fuel pressure gauge allows you to monitor the fuel pressure while the engine is under a load. However, since the fuel pressure requirement is listed by the engine manufacturer, do pilots even need a gauge to see that the fuel pressure is within normal range? Could we remove the gauge and just warns the pilot if the ... |
39383 | <p>Yes, the pilot would certainly notice the difference.</p>
<p>When the engine applies clockwise torque to the main rotor, the body of the helicopter experiences counterclockwise torque. When the pilot increases collective to increase the amount of lift the main rotor produces, the engine will need to apply more torq... |
45013 | <p>How do a <strong><em>service letter</em></strong> and <strong><em>service bulletin</em></strong> differ.</p>
|
61652 | <p>How <em>exactly</em> does a G1000 system equipped with a GDC 74 air data computer calculate the indicated airspeed that is displayed on the PFD from difference between the total and static pressure (i.e. dynamic pressure) measured from the pitot-static system?</p>
<p>The reason I ask is because I want to reverse th... |
50321 | <p>In refinery industry ; welding is not easy, and that is for steel which is much easier to weld than aluminum and titanium. ASME Boiler and Pressure Vessel code has a whole section ( Section 5 ) that defines the requirements and conditions for welding refinery steels. One of the biggest problems for any metal is the... |
96869 | <p>When I've rented before (admittedly many years ago), the FBO / flight school provided a (credit) card to use for fueling, and they paid the monthly bill of course. Receipts were submitted for verification. Charges on the card not related to (fueling) the airplane could result in you not being allowed to rent anymore... |
94988 | <p>As the other answers have indicated, you want to take off into the wind as much as possible (aside from other considerations like runway slope or obstructions). The airplane has a maximum demonstrated crosswind component, but you also need to consider your personal minimums / maximums.</p>
<p>As <a href="https://avi... |
58714 | <p>This is a fairly broad question, as there are a lot of possible airplanes you could be flying in, all with a variety of possible avionics and flight control configurations. But, there are two main types of avionics - the so-called "six pack" of analog instruments and glass displays. Both display the same basic infor... |
30532 | <p>I know that METAR data are available at hourly intervals from the US National Oceanic and Atmospheric Administration (see e.g. the <a href="http://weather.noaa.gov/weather/current/LGKP.html" rel="nofollow">report for Karpathos Airport, Greece </a>). However, I would have thought that at the age of the internet it w... |
55209 | <blockquote>
<p>However, shouldn't the airflow separating from the wing's upper surface result in a large area of low pressure above the wing, and, thus, greatly increase lift? What am I missing?</p>
</blockquote>
<p>Well the total aerodynamic force DOES indeed increase, but as it is now pointing almost backwards mo... |
24785 | <p>Airbus WILL take off ~safely~ regardless of the pitch trim, as long as trim is in the t/o green range.</p>
<p>Adjusting the trim to the correct position, however, depending on the location of the CG for that flight, insures the aircraft handles similarly between takeoffs and rotation will be more or less standard b... |
73538 | <p>What is the time frame ? Vitalium ( cobalt + chromium + Mo ) was one of the first turbine blade materials. Otherwise 50 % iron is not unusual ; for example the Incoloy group. But most of the high temperature materials have nickel as the major element . And contain Cr, Mo, Co , W , etc , and 1 to 20% iron. A tempera... |
84986 | <p>I doubt anyone in the trade would call any first stage turbine material a "steel" although many contain some iron. Vitallium was one of the first alloys Cr and Co ( no iron). Carbides are not used as such although there is a myriad of intermetallic particles , some are carbides, that form in the alloys as they are... |
72691 | <p>I have been working on a game which has futuristic VTOL-capable air and aerospace crafts. </p>
<p>A player recently wrote that the stall warning (tone and aural) and AoA (tone and visual) were distracting/annoying/unnecessary/spurious during VTOL takeoff and landing. Same with the "don't sink" EGPWS call-out.</p>
... |
39672 | <p>I read somewhere that the follow up system aids in actuator deflection in specified position by controlling hydraulic fluid to the actuator , but how? </p>
|
58470 | <p>As a regular General Aviation pilot, how do I contact or relay a <strong>simple</strong> message to someone on the ground? For example, to update a friend, family member, or taxi company with an ETA or a meeting point. Assume that asking them to follow a tail number on something like FlightAware would not suffice.</... |
67546 | <p>I would argue there is nothing in the books specifically called ‘short landing technique’ as any landing in a jet is already designed to be as short as possible. Then it becomes a ‘normal landing technique’.</p>
<p>Sure, if you have many 1000’s meters to spare, you might occasionally go for a greaser and land longe... |
51604 | <p>Mind you, not all aircraft need one, especially slower piston ones.</p>
<p>As you get closer to higher speeds, where compressiblity becomes significant, and you are approaching the speed of sound, the air starts to behave differently aerodynamicaly. </p>
<p>Also: remember how the air is a little bit accelerated ov... |
38979 | <ul>
<li>train yourself to look at the watch (wristwatch,cockpit,etc) at least once a minute, just like part of the instrument scan. Pro: It gives you an awareness of the time elapsed, and also helps with lost comms scenarios,etc. Cons: might develop into OCD</li>
<li>pick a visible landmark ahead along your route. "wh... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.