File size: 2,363 Bytes
5154c4e 3de3b50 5154c4e | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 | {
"id": "single-software-execution--cli--abaqus--task-17--windows",
"snapshot": "ABAQUS-2025L",
"instruction": "Using Abaqus from the command line, analyze thermal bending of a cantilever plate in the N-mm-MPa unit system. Abaqus command-line jobs should be launched through `C:\\SIMULIA\\Commands\\abaqus.bat`. Create a 3D deformable solid plate spanning X = 0 to 100 mm, Y = 0 to 20 mm, and Z = 0 to 4 mm. Partition it at Y = 10 mm so the upper and lower halves are separate cell regions. Define Aluminum with E = 70000 MPa, nu = 0.33, and thermal expansion coefficient 2.3e-5 /K; assign a solid homogeneous section to the whole plate. Create one dependent instance and a Static, General step named Step-ThermalBend. Apply Encastre only to the X = 0 end. Apply an initial temperature of 20 degC to the whole plate. In Step-ThermalBend, set only the upper half, Y = 10 to 20 mm, to 120 degC; the lower half must remain at 20 degC. Create named sets FIXED_END and HOT_HALF. Mesh with C3D8R elements and a 4 mm global seed. Create and run Job-ThermalBend. Review U2 at the free end and the S11 bending-stress distribution. Save C:\\Users\\user\\Desktop\\Job-ThermalBend.cae and C:\\Users\\user\\Desktop\\Job-ThermalBend.odb.",
"source": "https://github.com/nasa/abaverify https://github.com/pantale/abaqusVumat https://github.com/davidmorinNTNU/ABAQUS_subroutines",
"config": [
{
"type": "upload_file",
"parameters": {
"files": []
}
}
],
"trajectory": "trajectories/",
"related_apps": [
"abaqus"
],
"artifact_paths": [
"C:\\Users\\user\\Desktop\\Job-ThermalBend.cae",
"C:\\Users\\user\\Desktop\\Job-ThermalBend.odb"
],
"evaluator": {
"postconfig": [
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-17/eval.py",
"path": "C:\\Users\\user\\Desktop\\eval.py"
}
]
}
}
],
"func": "exact_match",
"result": {
"type": "vm_command_line",
"command": "C:\\SIMULIA\\Commands\\abaqus.bat cae noGUI=C:\\Users\\user\\Desktop\\eval.py",
"shell": "true"
},
"expected": {
"type": "rule",
"rules": {
"expected": "True\n"
}
}
},
"proxy": false,
"fixed_ip": false,
"possibility_of_env_change": "low"
}
|