File size: 3,402 Bytes
5154c4e 3de3b50 5154c4e | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 | {
"id": "single-software-execution--cli--freecad-path--task-13--ubuntu",
"snapshot": "freecad-path0.21.2",
"instruction": "Treat /home/user/Desktop/hole_group_part.step in FreeCAD Path/CAM and read /home/user/Desktop/hole_table.csv and /home/user/Desktop/tools.csv as the starting point. To use FreeCAD, run `freecad` from a terminal (use the full executable path if it is not on PATH). For the steps below, use `/usr/lib/freecad/bin/freecadcmd-python3` for FreeCAD Path command-line automation when working on `hole_group_part.step`.\n\nThe STEP model supplies the geometry, while use hole_table.csv for every hole ID, center, manufacturing type, diameter, machining depth, counterbore dimensions, and thread parameters; do not infer threaded-hole semantics from STEP geometry alone. Create one FreeCAD Path/CAM Job with G54 at the center of the top face, Z0 on the top face, and +Z away from the part. Use exactly this operation plan: (1) T1 Spot Drill all H01-H24 to 1.0 mm depth; (2) T2 Drill the eight through holes, eight blind holes, and four counterbore pilot holes to their listed machining depths; (3) T3 Drill only H21-H24 as 6.8 mm through pilot holes to 19.0 mm depth; (4) T4 Helix only H17-H20 to make the listed 10.0 mm diameter by 3.0 mm deep counterbores; and (5) T5 Thread Mill only H21-H24 as right-hand internal M8x1.25 threads, using 1.25 mm pitch, 15.0 mm thread depth, and a 1.5 mm tool-center orbit radius. Use incremental I/J arc-center offsets (G91.1) for T4 and T5. Use counterclockwise G3 helical interpolation from the top downward for T5, with one 1.25 mm Z descent per complete revolution. Do not substitute a generic helical approximation for the T5 Thread Mill operation. Use the exact tool numbers and diameters in tools.csv, with S7000 rpm and F500 mm/min for every tool. Through depths of 19.0 mm include 1.0 mm break-through below the 18.0 mm plate. Post the Job to exactly /home/user/Desktop/task-13.nc.",
"source": "https://wiki.freecad.org/Path_Drilling; https://wiki.freecad.org/Path_Helix; https://wiki.freecad.org/Path_ThreadMilling",
"config": [
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-13/init_file/hole_group_part.step",
"path": "/home/user/Desktop/hole_group_part.step"
},
{
"local_path": "task-13/init_file/hole_table.csv",
"path": "/home/user/Desktop/hole_table.csv"
},
{
"local_path": "task-13/init_file/tools.csv",
"path": "/home/user/Desktop/tools.csv"
}
]
}
}
],
"trajectory": "trajectories/",
"related_apps": [
"freecad-path"
],
"artifact_paths": [
"/home/user/Desktop/task-13.nc"
],
"evaluator": {
"postconfig": [
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-13/eval.py",
"path": "/home/user/Desktop/eval.py"
}
]
}
}
],
"func": "exact_match",
"result": {
"type": "vm_command_line",
"command": "python3 /home/user/Desktop/eval.py",
"shell": "true"
},
"expected": {
"type": "rule",
"rules": {
"expected": "True\n"
}
}
},
"proxy": false,
"fixed_ip": false,
"possibility_of_env_change": "low"
}
|