File size: 2,776 Bytes
5154c4e 3de3b50 5154c4e | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 | {
"id": "single-software-execution--cli--kicad--task-21--ubuntu",
"snapshot": "kicad-10.0.2",
"instruction": "Return-Path Split Repair\nThe file `/home/user/Desktop/board.kicad_pcb` contains an HS1 F.Cu route from R1 to R2 that currently crosses the explicit `RETURN_PATH_SPLIT_BLOCK` keepout spanning x=38.5 to 41.5 mm and y=16 to 24 mm. Use KiCad 10.0.2; run `kicad` for the GUI or `kicad-cli` for scripting/headless use (use PATH or the full install path). For the steps below, the installed KiCad tools are `/usr/bin/kicad-cli`, `/usr/bin/pcbnew`, and `/usr/bin/eeschema`; use the one that matches the board or schematic operation.\n\nReroute HS1 entirely on F.Cu so it remains electrically continuous between R1 and R2, never enters that keepout, crosses x=40 mm above y=24 mm or below y=16 mm, and uses a minimum track width of 0.20 mm. Retain the keepout. Move CS1 to (38, 27.5) mm and CS2 to (42, 27.5) mm, retaining their GND and +3V3 pad assignments.\n\nIn `/home/user/Desktop/board.kicad_dru`, add exactly one rule named `return_path_split_crossing` with condition `A.Type == 'Track' && A.NetName == 'HS1'`; give that rule minimum `track_width` and `clearance` constraints of 0.20 mm. Generate `/home/user/Desktop/drc.report` from the final board with the native KiCad CLI. Write the updated board, `.dru`, and report to the desktop paths above.",
"source": "https://docs.kicad.org/10.0/en/cli/cli.html; https://docs.kicad.org/10.0/en/pcbnew/pcbnew.html; https://dev-docs.kicad.org/en/file-formats/; https://gitlab.com/kicad/code/kicad/-/tags/10.0.2",
"config": [
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-21/init_file/board.kicad_dru",
"path": "/home/user/Desktop/board.kicad_dru"
}
]
}
},
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-21/init_file/board.kicad_pcb",
"path": "/home/user/Desktop/board.kicad_pcb"
}
]
}
}
],
"trajectory": "trajectories/",
"related_apps": [
"kicad"
],
"evaluator": {
"postconfig": [
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-21/eval.py",
"path": "/home/user/Desktop/eval.py"
}
]
}
}
],
"func": "exact_match",
"result": {
"type": "vm_command_line",
"command": "python3 /home/user/Desktop/eval.py",
"shell": "true"
},
"expected": {
"type": "rule",
"rules": {
"expected": "True\n"
}
}
},
"proxy": false,
"fixed_ip": false,
"possibility_of_env_change": "low"
}
|