File size: 3,503 Bytes
5154c4e 3de3b50 5154c4e | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 | {
"id": "single-software-execution--cli--solidcam--task-03--windows",
"snapshot": "SolidCAM-2025",
"instruction": "Using command-line automation only, operate the installed SOLIDWORKS CAM 2025 environment through the CAMWorks API; do not use GUI clicks, GUI automation, generic G-code generators, prebuilt helper wrappers, or manual .nc editing/copying. On this machine, SOLIDWORKS CAM/CAMWorks is hosted by `C:\\Program Files\\SOLIDWORKS Corp\\SOLIDWORKS\\SLDWORKS.exe`; run the native CAM automation through that installation. Load C:\\Users\\User\\Desktop\\p1.step, C:\\Users\\User\\Desktop\\p2.step, C:\\Users\\User\\Desktop\\p3.step, and read C:\\Users\\User\\Desktop\\tools.csv. Create three independent native CAM parts, one from each STEP input; do not copy or reuse a CAM document, setup, operation, or NC program between parts. For each part, create one outside Profile/Contour operation about its complete rectangular perimeter. Use G54 with the part's own top-face center at model coordinates [0, 0, 10] mm and tool axis -Z, so posted top is Z=0 and the 10 mm bottom is Z=-10. Use T1, a 6 mm flat end mill, at S9000 rpm and F650 mm/min for material-cutting XY contour moves; controlled plunge feed may be lower. Apply one correct cutter-radius compensation method: either CAM-computed 3 mm outside tool-center offset with controller compensation off, or a nominal-boundary path with correct controller compensation. Generate a complete closed outside contour with safe approach and retract, then post-process each native CAM part with the installed SOLIDWORKS CAM postprocessor. Save the posted NC outputs exactly as C:\\Users\\User\\Desktop\\p1.nc, C:\\Users\\User\\Desktop\\p2.nc, and C:\\Users\\User\\Desktop\\p3.nc.",
"source": "Installed SOLIDWORKS CAM 2025 / CAMWorks API; official SOLIDWORKS CAM product and training documentation: https://www.solidworks.com/product/solidworks-cam ; https://www.solidworks.com/support/training/solidworks-cam-standard",
"config": [
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-03/init_file/p1.step",
"path": "C:\\Users\\User\\Desktop\\p1.step"
},
{
"local_path": "task-03/init_file/p2.step",
"path": "C:\\Users\\User\\Desktop\\p2.step"
},
{
"local_path": "task-03/init_file/p3.step",
"path": "C:\\Users\\User\\Desktop\\p3.step"
},
{
"local_path": "task-03/init_file/tools.csv",
"path": "C:\\Users\\User\\Desktop\\tools.csv"
}
]
}
}
],
"trajectory": "trajectories/",
"related_apps": [
"solidcam"
],
"artifact_paths": [
"C:\\Users\\User\\Desktop\\p1.nc",
"C:\\Users\\User\\Desktop\\p2.nc",
"C:\\Users\\User\\Desktop\\p3.nc"
],
"evaluator": {
"postconfig": [
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-03/eval.py",
"path": "C:\\Users\\User\\Desktop\\eval.py"
}
]
}
}
],
"func": "exact_match",
"result": {
"type": "vm_command_line",
"command": "python C:\\Users\\User\\Desktop\\eval.py",
"shell": "true"
},
"expected": {
"type": "rule",
"rules": {
"expected": "True\n"
}
}
},
"proxy": false,
"fixed_ip": false,
"possibility_of_env_change": "low"
}
|