File size: 2,772 Bytes
5154c4e 3de3b50 5154c4e | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 | {
"id": "single-software-execution--cli--solidcam--task-15--windows",
"snapshot": "SolidCAM-2025",
"instruction": "Use command-line automation through the installed SOLIDWORKS CAM 2025 environment and CAMWorks API; do not use GUI clicks, generic G-code generators, or manual .nc editing/copying. For this workflow, SOLIDWORKS CAM/CAMWorks is hosted by `C:\\Program Files\\SOLIDWORKS Corp\\SOLIDWORKS\\SLDWORKS.exe`; run the native CAM automation through that installation. Load C:\\Users\\User\\Desktop\\risky_setup.step and read C:\\Users\\User\\Desktop\\tools.csv. Treat the fixture solids contained in the supplied STEP assembly as the complete collision envelope for this task; installed TechDB holder profiles may be used to instantiate tools but must not change the required safe-hole set. Plan spot-drilling and drilling for the sixteen D5 candidate holes with the supplied D3 spot drill and D5 drill while maintaining at least 3 mm radial clearance between the cutting-tool envelope and every fixture during cutting or lateral feed motion. The holes centered at (-45, 24), (15, 24), and (45, 24) mm do not satisfy this clearance and must be skipped; omit those three coordinates from cutting cycles. Spot-drill and drill all remaining thirteen holes, use a clearance plane at least 3 mm above the 28 mm fixture tops for lateral positioning, and post the result through SOLIDWORKS CAM. Save the posted NC output exactly as C:\\Users\\User\\Desktop\\task-15.nc.",
"source": "https://www.solidworks.com/product/solidworks-cam; https://camworks.com/why-camworks/",
"config": [
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-15/init_file/risky_setup.step",
"path": "C:\\Users\\User\\Desktop\\risky_setup.step"
},
{
"local_path": "task-15/init_file/tools.csv",
"path": "C:\\Users\\User\\Desktop\\tools.csv"
}
]
}
}
],
"trajectory": "trajectories/",
"related_apps": [
"solidcam"
],
"artifact_paths": [
"C:\\Users\\User\\Desktop\\task-15.nc"
],
"evaluator": {
"postconfig": [
{
"type": "upload_file",
"parameters": {
"files": [
{
"local_path": "task-15/eval.py",
"path": "C:\\Users\\User\\Desktop\\eval.py"
}
]
}
}
],
"func": "exact_match",
"result": {
"type": "vm_command_line",
"command": "python C:\\Users\\User\\Desktop\\eval.py",
"shell": "true"
},
"expected": {
"type": "rule",
"rules": {
"expected": "True\n"
}
}
},
"proxy": false,
"fixed_ip": false,
"possibility_of_env_change": "low"
}
|